|
|
Search Results
There are 34 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2024-7322 | A ZigBee coordinator, router, or end device may change their node ID when an unsolicited encrypted rejoin response is received, this change in node ID causes Denial of Service (DoS). To recover from this DoS, the network must be re-established |
| CVE-2024-4854 | MONGO and ZigBee TLV dissector infinite loops in Wireshark 4.2.0 to 4.2.4, 4.0.0 to 4.0.14, and 3.6.0 to 3.6.22 allow denial of service via packet injection or crafted capture file |
| CVE-2024-3043 | An unauthenticated IEEE 802.15.4 'co-ordinator realignment' packet can be used to force Zigbee nodes to change their network identifier (pan ID), leading to a denial of service. This packet type is not useful in production and should be used only for PHY qualification. |
| CVE-2024-11305 | A vulnerability classified as critical was found in Altenergy Power Control Software up to 20241108. This vulnerability affects the function get_status_zigbee of the file /index.php/display/status_zigbee. The manipulation of the argument date leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0210 | Zigbee TLV dissector crash in Wireshark 4.2.0 allows denial of service via packet injection or crafted capture file |
| CVE-2023-29780 | Third Reality Smart Blind 1.00.54 contains a denial-of-service vulnerability, which allows a remote attacker to send malicious Zigbee messages to a vulnerable device and cause crashes. |
| CVE-2023-29779 | Sengled Dimmer Switch V0.0.9 contains a denial of service (DOS) vulnerability, which allows a remote attacker to send malicious Zigbee messages to a vulnerable device and cause crashes. After receiving the malicious command, the device will keep reporting its status and finally drain its battery after receiving the 'Set_short_poll_interval' command. |
| CVE-2023-24678 | A vulnerability in Centralite Pearl Thermostat 0x04075010 allows attackers to cause a Denial of Service (DoS) via a crafted Zigbee message. |
| CVE-2022-39065 | A single malformed IEEE 802.15.4 (Zigbee) frame makes the TRÅDFRI gateway unresponsive, such that connected lighting cannot be controlled with the IKEA Home Smart app and TRÅDFRI remote control. The malformed Zigbee frame is an unauthenticated broadcast message, which means all vulnerable devices within radio range are affected. CVSS 3.1 Base Score: 6.5 Vector: CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H |
| CVE-2022-39064 | An attacker sending a single malformed IEEE 802.15.4 (Zigbee) frame makes the TRÅDFRI bulb blink, and if they replay (i.e. resend) the same frame multiple times, the bulb performs a factory reset. This causes the bulb to lose configuration information about the Zigbee network and current brightness level. After this attack, all lights are on with full brightness, and a user cannot control the bulbs with either the IKEA Home Smart app or the TRÅDFRI remote control. The malformed Zigbee frame is an unauthenticated broadcast message, which means all vulnerable devices within radio range are affected. CVSS 3.1 Base Score 7.1 vector: CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H |
| CVE-2020-7476 | A CWE-426: Untrusted Search Path vulnerability exists in ZigBee Installation Kit (Versions prior to 1.0.1), which could cause execution of malicious code when a malicious file is put in the search path. |
| CVE-2020-28952 | An issue was discovered on Athom Homey and Homey Pro devices before 5.0.0. ZigBee hub devices should generate a unique Standard Network Key that is then exchanged with all enrolled devices so that all inter-device communication is encrypted. However, the cited Athom products use another widely known key that is designed for testing purposes: "01030507090b0d0f00020406080a0c0d" (the decimal equivalent of 1 3 5 7 9 11 13 15 0 2 4 6 8 10 12 13), which is human generated and static across all issued devices. |
| CVE-2020-27892 | The Zigbee protocol implementation on Texas Instruments CC2538 devices with Z-Stack 3.0.1 does not properly process a ZCL Discover Commands Received Response message or a ZCL Discover Commands Generated Response message. It crashes in zclParseInDiscCmdsRspCmd(). |
| CVE-2020-27891 | The Zigbee protocol implementation on Texas Instruments CC2538 devices with Z-Stack 3.0.1 does not properly process a ZCL Read Reporting Configuration Response message. It crashes in zclHandleExternal(). |
| CVE-2020-27890 | The Zigbee protocol implementation on Texas Instruments CC2538 devices with Z-Stack 3.0.1 does not properly process a ZCL Write Attributes No Response message. It crashes in zclParseInWriteCmd() and does not update the specific attribute's value. |
| CVE-2019-20481 | In MIELE XGW 3000 ZigBee Gateway before 2.4.0, the Password Change Function does not require knowledge of the old password. This can be exploited in conjunction with CVE-2019-20480. |
| CVE-2019-20480 | In MIELE XGW 3000 ZigBee Gateway before 2.4.0, a malicious website visited by an authenticated admin user or a malicious mail is allowed to make arbitrary changes in the "admin panel" because there is no CSRF protection. |
| CVE-2019-15915 | An issue was discovered on Xiaomi DGNWG03LM, ZNCZ03LM, MCCGQ01LM, RTCGQ01LM devices. Attackers can utilize the "discover ZigBee network procedure" to perform a denial of service attack. |
| CVE-2019-15914 | An issue was discovered on Xiaomi DGNWG03LM, ZNCZ03LM, MCCGQ01LM, WSDCGQ01LM, RTCGQ01LM devices. Attackers can use the ZigBee trust center rejoin procedure to perform mutiple denial of service attacks. |
| CVE-2019-15913 | An issue was discovered on Xiaomi DGNWG03LM, ZNCZ03LM, MCCGQ01LM, WSDCGQ01LM, RTCGQ01LM devices. Because of insecure key transport in ZigBee communication, causing attackers to gain sensitive information and denial of service attack, take over smart home devices, and tamper with messages. |
| CVE-2019-15912 | An issue was discovered on ASUS HG100, MW100, WS-101, TS-101, AS-101, MS-101, DL-101 devices using ZigBee PRO. Attackers can use the ZigBee trust center rejoin procedure to perform mutiple denial of service attacks. |
| CVE-2019-15911 | An issue was discovered on ASUS HG100, MW100, WS-101, TS-101, AS-101, MS-101, DL-101 devices using ZigBee PRO. Because of insecure key transport in ZigBee communication, attackers can obtain sensitive information, cause the multiple denial of service attacks, take over smart home devices, and tamper with messages. |
| CVE-2019-15910 | An issue was discovered on ASUS HG100, MW100, WS-101, TS-101, AS-101, MS-101, DL-101 devices using ZigBee PRO. Attackers can utilize the "discover ZigBee network procedure" to perform a denial of service attack. |
| CVE-2018-3926 | An exploitable integer underflow vulnerability exists in the ZigBee firmware update routine of the hubCore binary of the Samsung SmartThings Hub STH-ETH-250 - Firmware version 0.20.17. The hubCore process incorrectly handles malformed files existing in its data directory, leading to an infinite loop, which eventually causes the process to crash. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2018-19628 | In Wireshark 2.6.0 to 2.6.4, the ZigBee ZCL dissector could crash. This was addressed in epan/dissectors/packet-zbee-zcl-lighting.c by preventing a divide-by-zero error. |
| CVE-2017-18868 | Digi XBee 2 devices do not have an effective protection mechanism against remote AT commands, because of issues related to the network stack upon which the ZigBee protocol is built. |
| CVE-2016-5058 | OSRAM SYLVANIA Osram Lightify Pro through 2016-07-26 allows Zigbee replay. |
| CVE-2016-5054 | OSRAM SYLVANIA Osram Lightify Home through 2016-07-26 allows Zigbee replay. |
| CVE-2016-2398 | Comcast XFINITY Home Security System does not properly maintain base-station communication, which allows physically proximate attackers to defeat sensor functionality by interfering with ZigBee 2.4 GHz transmissions. |
| CVE-2016-1562 | The REST API in the DTE Energy Insight application before 1.7.8 for Android allows remote authenticated users to obtain unspecified customer information via a SQL expression in the filter parameter. |
| CVE-2015-8732 | The dissect_zcl_pwr_prof_pwrprofstatersp function in epan/dissectors/packet-zbee-zcl-general.c in the ZigBee ZCL dissector in Wireshark 1.12.x before 1.12.9 and 2.0.x before 2.0.1 does not validate the Total Profile Number field, which allows remote attackers to cause a denial of service (out-of-bounds read and application crash) via a crafted packet. |
| CVE-2015-6244 | The dissect_zbee_secure function in epan/dissectors/packet-zbee-security.c in the ZigBee dissector in Wireshark 1.12.x before 1.12.7 improperly relies on length fields contained in packet data, which allows remote attackers to cause a denial of service (application crash) via a crafted packet. |
| CVE-2012-1288 | The UTC Fire & Security GE-MC100-NTP/GPS-ZB Master Clock device uses hardcoded credentials for an administrative account, which makes it easier for remote attackers to obtain access via an HTTP session. |
| CVE-2010-4301 | epan/dissectors/packet-zbee-zcl.c in the ZigBee ZCL dissector in Wireshark 1.4.0 through 1.4.1 allows remote attackers to cause a denial of service (infinite loop) via a crafted ZCL packet, related to Discover Attributes. |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
