Search Results
There are 762 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2024-30397 | An Improper Check for Unusual or Exceptional Conditions vulnerability in the the Public Key Infrastructure daemon (pkid) of Juniper Networks Junos OS allows an unauthenticated networked attacker to cause Denial of Service (DoS). The pkid is responsible for the certificate verification. Upon a failed verification, the pkid uses all CPU resources and becomes unresponsive to future verification attempts. This means that all subsequent VPN negotiations depending on certificate verification will fail. This CPU utilization of pkid can be checked using this command: root@srx> show system processes extensive | match pkid xxxxx root 103 0 846M 136M CPU1 1 569:00 100.00% pkid This issue affects: Juniper Networks Junos OS All versions prior to 20.4R3-S10; 21.2 versions prior to 21.2R3-S7; 21.4 versions prior to 21.4R3-S5; 22.1 versions prior to 22.1R3-S4; 22.2 versions prior to 22.2R3-S3; 22.3 versions prior to 22.3R3-S1; 22.4 versions prior to 22.4R3; 23.2 versions prior to 23.2R1-S2, 23.2R2. |
| CVE-2024-29243 | Shenzhen Libituo Technology Co., Ltd LBT-T300-mini v1.2.9 was discovered to contain a buffer overflow via the vpn_client_ip parameter at /apply.cgi. |
| CVE-2024-2910 | A vulnerability, which was classified as critical, has been found in Ruijie RG-EG350 up to 20240318. Affected by this issue is the function vpnAction of the file /itbox_pi/vpn_quickset_service.php?a=set_vpn of the component HTTP POST Request Handler. The manipulation of the argument ip/port/user/pass/dns/startIp leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-257978 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-28403 | TOTOLINK X2000R before V1.0.0-B20231213.1013 is vulnerable to Cross Site Scripting (XSS) via the VPN Page. |
| CVE-2024-27567 | LBT T300- T390 v2.2.1.8 were discovered to contain a stack overflow via the vpn_client_ip parameter in the config_vpn_pptp function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted POST request. |
| CVE-2024-25728 | ExpressVPN before 12.73.0 on Windows, when split tunneling is used, sends DNS requests according to the Windows configuration (e.g., sends them to DNS servers operated by the user's ISP instead of to the ExpressVPN DNS servers), which may allow remote attackers to obtain sensitive information about websites visited by VPN users. |
| CVE-2024-23112 | An authorization bypass through user-controlled key vulnerability [CWE-639] in FortiOS version 7.4.0 through 7.4.1, 7.2.0 through 7.2.6, 7.0.1 through 7.0.13, 6.4.7 through 6.4.14, and FortiProxy version 7.4.0 through 7.4.2, 7.2.0 through 7.2.8, 7.0.0 through 7.0.14 SSL-VPN may allow an authenticated attacker to gain access to another user’s bookmark via URL manipulation. |
| CVE-2024-22395 | Improper access control vulnerability has been identified in the SMA100 SSL-VPN virtual office portal, which in specific conditions could potentially enable a remote authenticated attacker to associate another user's MFA mobile application. |
| CVE-2024-22394 | An improper authentication vulnerability has been identified in SonicWall SonicOS SSL-VPN feature, which in specific conditions could allow a remote attacker to bypass authentication. This issue affects only firmware version SonicOS 7.1.1-7040. |
| CVE-2024-21606 | A Double Free vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX Series allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). In a remote access VPN scenario, if a "tcp-encap-profile" is configured and a sequence of specific packets is received, a flowd crash and restart will be observed. This issue affects Juniper Networks Junos OS on SRX Series: * All versions earlier than 20.4R3-S8; * 21.2 versions earlier than 21.2R3-S6; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S3; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S1; * 22.4 versions earlier than 22.4R2-S2, 22.4R3. |
| CVE-2024-20337 | A vulnerability in the SAML authentication process of Cisco Secure Client could allow an unauthenticated, remote attacker to conduct a carriage return line feed (CRLF) injection attack against a user. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link while establishing a VPN session. A successful exploit could allow the attacker to execute arbitrary script code in the browser or access sensitive, browser-based information, including a valid SAML token. The attacker could then use the token to establish a remote access VPN session with the privileges of the affected user. Individual hosts and services behind the VPN headend would still need additional credentials for successful access. |
| CVE-2024-1195 | A vulnerability classified as critical was found in iTop VPN up to 4.0.0.1. Affected by this vulnerability is an unknown functionality in the library ITopVpnCallbackProcess.sys of the component IOCTL Handler. The manipulation leads to denial of service. The attack needs to be approached locally. The identifier VDB-252685 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0009 | An improper verification vulnerability in the GlobalProtect gateway feature of Palo Alto Networks PAN-OS software enables a malicious user with stolen credentials to establish a VPN connection from an unauthorized IP address. |
| CVE-2023-6764 | A format string vulnerability in a function of the IPSec VPN feature in Zyxel ATP series firmware versions from 4.32 through 5.37 Patch 1, USG FLEX series firmware versions from 4.50 through 5.37 Patch 1, USG FLEX 50(W) series firmware versions from 4.16 through 5.37 Patch 1, and USG20(W)-VPN series firmware versions from 4.16 through 5.37 Patch 1 could allow an attacker to achieve unauthorized remote code execution by sending a sequence of specially crafted payloads containing an invalid pointer; however, such an attack would require detailed knowledge of an affected device’s memory layout and configuration. |
| CVE-2023-6399 | A format string vulnerability in Zyxel ATP series firmware versions from 4.32 through 5.37 Patch 1, USG FLEX series firmware versions from 4.50 through 5.37 Patch 1, USG FLEX 50(W) series firmware versions from 4.16 through 5.37 Patch 1, USG20(W)-VPN series firmware versions from 4.16 through 5.37 Patch 1, and USG FLEX H series firmware versions from 1.10 through 1.10 Patch 1 could allow an authenticated IPSec VPN user to cause DoS conditions against the “deviceid” daemon by sending a crafted hostname to an affected device if it has the “Device Insight” feature enabled. |
| CVE-2023-6398 | A post-authentication command injection vulnerability in the file upload binary in Zyxel ATP series firmware versions from 4.32 through 5.37 Patch 1, USG FLEX series firmware versions from 4.50 through 5.37 Patch 1, USG FLEX 50(W) series firmware versions from 4.16 through 5.37 Patch 1, USG20(W)-VPN series firmware versions from 4.16 through 5.37 Patch 1, USG FLEX H series firmware versions from 1.10 through 1.10 Patch 1, NWA50AX firmware versions through 6.29(ABYW.3), WAC500 firmware versions through 6.65(ABVS.1), WAX300H firmware versions through 6.60(ACHF.1), and WBE660S firmware versions through 6.65(ACGG.1) could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device via FTP. |
| CVE-2023-5970 | Improper authentication in the SMA100 SSL-VPN virtual office portal allows a remote authenticated attacker to create an identical external domain user using accent characters, resulting in an MFA bypass. |
| CVE-2023-5960 | An improper privilege management vulnerability in the hotspot feature of the Zyxel USG FLEX series firmware versions 4.50 through 5.37 and VPN series firmware versions 4.30 through 5.37 could allow an authenticated local attacker to access the system files on an affected device. |
| CVE-2023-5797 | An improper privilege management vulnerability in the debug CLI command of the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, VPN series firmware versions 4.30 through 5.37, NWA50AX firmware version 6.29(ABYW.2), WAC500 firmware version 6.65(ABVS.1), WAX300H firmware version 6.60(ACHF.1), and WBE660S firmware version 6.65(ACGG.1), could allow an authenticated local attacker to access the administrator’s logs on an affected device. |
| CVE-2023-5748 | Buffer copy without checking size of input ('Classic Buffer Overflow') vulnerability in cgi component in Synology SSL VPN Client before 1.4.7-0687 allows local users to conduct denial-of-service attacks via unspecified vectors. |
| CVE-2023-5650 | An improper privilege management vulnerability in the ZySH of the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, and VPN series firmware versions 4.30 through 5.37, could allow an authenticated local attacker to modify the URL of the registration page in the web GUI of an affected device. |
| CVE-2023-5593 | The out-of-bounds write vulnerability in the Windows-based SecuExtender SSL VPN Client software version 4.0.4.0 could allow an authenticated local user to gain a privilege escalation by sending a crafted CREATE message. |
| CVE-2023-50446 | An issue was discovered in Mullvad VPN Windows app before 2023.6-beta1. Insufficient permissions on a directory allow any local unprivileged user to escalate privileges to SYSTEM. |
| CVE-2023-4967 | Denial of Service in NetScaler ADC and NetScaler Gateway when configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) or AAA Virtual Server |
| CVE-2023-4966 | Sensitive information disclosure in NetScaler ADC and NetScaler Gateway when configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) or AAA virtual server. |
| CVE-2023-47618 | A post authentication command execution vulnerability exists in the web filtering functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2023-47617 | A post authentication command injection vulnerability exists when configuring the web group member of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2023-47267 | An issue discovered in TheGreenBow Windows Enterprise Certified VPN Client 6.52, Windows Standard VPN Client 6.87, and Windows Enterprise VPN Client 6.87 allows attackers to gain escalated privileges via crafted changes to memory mapped file. |
| CVE-2023-47209 | A post authentication command injection vulnerability exists in the ipsec policy functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2023-47167 | A post authentication command injection vulnerability exists in the GRE policy functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2023-47101 | The installer (aka openvpn-client-installer) in Securepoint SSL VPN Client before 2.0.40 allows local privilege escalation during installation or repair. |
| CVE-2023-46683 | A post authentication command injection vulnerability exists when configuring the wireguard VPN functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection . An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2023-4587 | An IDOR vulnerability has been found in ZKTeco ZEM800 product affecting version 6.60. This vulnerability allows a local attacker to obtain registered user backup files or device configuration files over a local network or through a VPN server. |
| CVE-2023-44221 | Improper neutralization of special elements in the SMA100 SSL-VPN management interface allows a remote authenticated attacker with administrative privilege to inject arbitrary commands as a 'nobody' user, potentially leading to OS Command Injection Vulnerability. |
| CVE-2023-44185 | An Improper Input Validation vulnerability in the routing protocol daemon (rpd) of Juniper Networks allows an attacker to cause a Denial of Service (DoS )to the device upon receiving and processing a specific malformed ISO VPN BGP UPDATE packet. Continued receipt of this packet will cause a sustained Denial of Service condition. This issue affects: * Juniper Networks Junos OS: * All versions prior to 20.4R3-S6; * 21.1 versions prior to 21.1R3-S5; * 21.2 versions prior to 21.2R3-S4; * 21.3 versions prior to 21.3R3-S3; * 21.4 versions prior to 21.4R3-S3; * 22.1 versions prior to 22.1R2-S2, 22.1R3; * 22.2 versions prior to 22.2R2-S1, 22.2R3; * 22.3 versions prior to 22.3R1-S2, 22.3R2. Juniper Networks Junos OS Evolved: * All versions prior to 20.4R3-S6-EVO; * 21.1-EVO version 21.1R1-EVO and later versions prior to 21.2R3-S4-EVO; * 21.3-EVO versions prior to 21.3R3-S3-EVO; * 21.4-EVO versions prior to 21.4R3-S3-EVO; * 22.1-EVO versions prior to 22.1R3-EVO; * 22.2-EVO versions prior to 22.2R2-S1-EVO, 22.2R3-EVO; * 22.3-EVO versions prior to 22.3R1-S2-EVO, 22.3R2-EVO. |
| CVE-2023-4398 | An integer overflow vulnerability in the source code of the QuickSec IPSec toolkit used in the VPN feature of the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, and VPN series firmware versions 4.30 through 5.37, could allow an unauthenticated attacker to cause denial-of-service (DoS) conditions on an affected device by sending a crafted IKE packet. |
| CVE-2023-4397 | A buffer overflow vulnerability in the Zyxel ATP series firmware version 5.37, USG FLEX series firmware version 5.37, USG FLEX 50(W) series firmware version 5.37, and USG20(W)-VPN series firmware version 5.37, could allow an authenticated local attacker with administrator privileges to cause denial-of-service (DoS) conditions by executing the CLI command with crafted strings on an affected device. |
| CVE-2023-43482 | A command execution vulnerability exists in the guest resource functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2023-43125 | BIG-IP APM clients may send IP traffic outside of the VPN tunnel. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated |
| CVE-2023-43124 | BIG-IP APM clients may send IP traffic outside of the VPN tunnel. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated |
| CVE-2023-42664 | A post authentication command injection vulnerability exists when setting up the PPTP global configuration of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2023-41891 | FlyteAdmin is the control plane for Flyte responsible for managing entities and administering workflow executions. Prior to version 1.1.124, list endpoints on FlyteAdmin have a SQL vulnerability where a malicious user can send a REST request with custom SQL statements as list filters. The attacker needs to have access to the FlyteAdmin installation, typically either behind a VPN or authentication. Version 1.1.124 contains a patch for this issue. |
| CVE-2023-41715 | SonicOS post-authentication Improper Privilege Management vulnerability in the SonicOS SSL VPN Tunnel allows users to elevate their privileges inside the tunnel. |
| CVE-2023-41712 | SonicOS post-authentication Stack-Based Buffer Overflow Vulnerability in the SSL VPN plainprefs.exp URL endpoint leads to a firewall crash. |
| CVE-2023-41349 | ASUS router RT-AX88U has a vulnerability of using externally controllable format strings within its Advanced Open VPN function. An authenticated remote attacker can exploit the exported OpenVPN configuration to execute an externally-controlled format string attack, resulting in sensitivity information leakage, or forcing the device to reset and permanent denial of service. |
| CVE-2023-41305 | Vulnerability of 5G messages being sent without being encrypted in a VPN environment in the SMS message module. Successful exploitation of this vulnerability may affect confidentiality. |
| CVE-2023-4104 | An invalid Polkit Authentication check and missing authentication requirements for D-Bus methods allowed any local user to configure arbitrary VPN setups. *This bug only affects Mozilla VPN on Linux. Other operating systems are unaffected.* This vulnerability affects Mozilla VPN client for Linux < v2.16.1. |
| CVE-2023-38902 | A command injection vulnerability in RG-EW series home routers and repeaters v.EW_3.0(1)B11P219, RG-NBS and RG-S1930 series switches v.SWITCH_3.0(1)B11P219, RG-EG series business VPN routers v.EG_3.0(1)B11P219, EAP and RAP series wireless access points v.AP_3.0(1)B11P219, and NBC series wireless controllers v.AC_3.0(1)B11P219 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /cgi-bin/luci/api/cmd via the remoteIp field. |
| CVE-2023-37926 | A buffer overflow vulnerability in the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, and VPN series firmware versions 4.30 through 5.37, could allow an authenticated local attacker to cause denial-of-service (DoS) conditions by executing the CLI command to dump system logs on an affected device. |
| CVE-2023-37925 | An improper privilege management vulnerability in the debug CLI command of the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, VPN series firmware versions 4.30 through 5.37, NWA50AX firmware version 6.29(ABYW.2), WAC500 firmware version 6.65(ABVS.1), WAX300H firmware version 6.60(ACHF.1), and WBE660S firmware version 6.65(ACGG.1), could allow an authenticated local attacker to access system files on an affected device. |
| CVE-2023-37849 | A DLL hijacking vulnerability in Panda Security VPN for Windows prior to version v15.14.8 allows attackers to execute arbitrary code via placing a crafted DLL file in the same directory as PANDAVPN.exe. |
| CVE-2023-36673 | An issue was discovered in Avira Phantom VPN through 2.23.1 for macOS. The VPN client insecurely configures the operating system such that all IP traffic to the VPN server's IP address is sent in plaintext outside the VPN tunnel, even if this traffic is not generated by the VPN client, while simultaneously using plaintext DNS to look up the VPN server's IP address. This allows an adversary to trick the victim into sending traffic to arbitrary IP addresses in plaintext outside the VPN tunnel. NOTE: the tunnelcrack.mathyvanhoef.com website uses this CVE ID to refer more generally to "ServerIP attack, combined with DNS spoofing, that can leak traffic to an arbitrary IP address" rather than to only Avira Phantom VPN. |
| CVE-2023-36672 | An issue was discovered in the Clario VPN client through 5.9.1.1662 for macOS. The VPN client insecurely configures the operating system such that traffic to the local network is sent in plaintext outside the VPN tunnel even if the local network is using a non-RFC1918 IP subnet. This allows an adversary to trick the victim into sending arbitrary IP traffic in plaintext outside the VPN tunnel. NOTE: the tunnelcrack.mathyvanhoef.com website uses this CVE ID to refer more generally to "LocalNet attack resulting in leakage of traffic in plaintext" rather than to only Clario. |
| CVE-2023-36671 | An issue was discovered in the Clario VPN client through 5.9.1.1662 for macOS. The VPN client insecurely configures the operating system such that all IP traffic to the VPN server's IP address is sent in plaintext outside the VPN tunnel even if this traffic is not generated by the VPN client. This allows an adversary to trick the victim into sending plaintext traffic to the VPN server's IP address and thereby deanonymize the victim. NOTE: the tunnelcrack.mathyvanhoef.com website uses this CVE ID to refer more generally to "ServerIP attack for only traffic to the real IP address of the VPN server" rather than to only Clario. |
| CVE-2023-36498 | A post-authentication command injection vulnerability exists in the PPTP client functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability and gain access to an unrestricted shell. |
| CVE-2023-35838 | The WireGuard client 0.5.3 on Windows insecurely configures the operating system and firewall such that traffic to a local network that uses non-RFC1918 IP addresses is blocked. This allows an adversary to trick the victim into blocking IP traffic to selected IP addresses and services even while the VPN is enabled. NOTE: the tunnelcrack.mathyvanhoef.com website uses this CVE ID to refer more generally to "LocalNet attack resulting in the blocking of traffic" rather than to only WireGuard. |
| CVE-2023-35139 | A cross-site scripting (XSS) vulnerability in the CGI program of the Zyxel ATP series firmware versions 5.10 through 5.37, USG FLEX series firmware versions 5.00 through 5.37, USG FLEX 50(W) series firmware versions 5.10 through 5.37, USG20(W)-VPN series firmware versions 5.10 through 5.37, and VPN series firmware versions 5.00 through 5.37, could allow an unauthenticated LAN-based attacker to store malicious scripts in a vulnerable device. A successful XSS attack could then result in the stored malicious scripts being executed to steal cookies when the user visits the specific CGI used for dumping ZTP logs. |
| CVE-2023-35136 | An improper input validation vulnerability in the “Quagga” package of the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, and VPN series firmware versions 4.30 through 5.37, could allow an authenticated local attacker to access configuration files on an affected device. |
| CVE-2023-34644 | Remote code execution vulnerability in Ruijie Networks Product: RG-EW series home routers and repeaters EW_3.0(1)B11P204, RG-NBS and RG-S1930 series switches SWITCH_3.0(1)B11P218, RG-EG series business VPN routers EG_3.0(1)B11P216, EAP and RAP series wireless access points AP_3.0(1)B11P218, NBC series wireless controllers AC_3.0(1)B11P86 allows unauthorized remote attackers to gain the highest privileges via crafted POST request to /cgi-bin/luci/api/auth. |
| CVE-2023-34141 | A command injection vulnerability in the access point (AP) management feature of the Zyxel ATP series firmware versions 5.00 through 5.36 Patch 2, USG FLEX series firmware versions 5.00 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 5.00 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 5.00 through 5.36 Patch 2, VPN series firmware versions 5.00 through 5.36 Patch 2, NXC2500 firmware versions 6.10(AAIG.0) through 6.10(AAIG.3), and NXC5500 firmware versions 6.10(AAOS.0) through 6.10(AAOS.4), could allow an unauthenticated, LAN-based attacker to execute some OS commands on an affected device if the attacker could trick an authorized administrator to add their IP address to the managed AP list in advance. |
| CVE-2023-34140 | A buffer overflow vulnerability in the Zyxel ATP series firmware versions 4.32 through 5.36 Patch 2, USG FLEX series firmware versions 4.50 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 4.16 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 4.16 through 5.36 Patch 2, VPN series firmware versions 4.30 through 5.36 Patch 2, NXC2500 firmware versions 6.10(AAIG.0) through 6.10(AAIG.3), and NXC5500 firmware versions 6.10(AAOS.0) through 6.10(AAOS.4), could allow an unauthenticated, LAN-based attacker to cause denial of service (DoS) conditions by sending a crafted request to the CAPWAP daemon. |
| CVE-2023-34139 | A command injection vulnerability in the Free Time WiFi hotspot feature of the Zyxel USG FLEX series firmware versions 4.50 through 5.36 Patch 2 and VPN series firmware versions 4.20 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands on an affected device. |
| CVE-2023-34138 | A command injection vulnerability in the hotspot management feature of the Zyxel ATP series firmware versions 4.60 through 5.36 Patch 2, USG FLEX series firmware versions 4.60 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 4.60 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 4.60 through 5.36 Patch 2, and VPN series firmware versions 4.60 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands on an affected device if the attacker could trick an authorized administrator to add their IP address to the list of trusted RADIUS clients in advance. |
| CVE-2023-33012 | A command injection vulnerability in the configuration parser of the Zyxel ATP series firmware versions 5.10 through 5.36 Patch 2, USG FLEX series firmware versions 5.00 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 5.10 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 5.10 through 5.36 Patch 2, and VPN series firmware versions 5.00 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands by using a crafted GRE configuration when the cloud management mode is enabled. |
| CVE-2023-33011 | A format string vulnerability in the Zyxel ATP series firmware versions 5.10 through 5.36 Patch 2, USG FLEX series firmware versions 5.00 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 5.10 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 5.10 through 5.36 Patch 2, and VPN series firmware versions 5.00 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands by using a crafted PPPoE configuration on an affected device when the cloud management mode is enabled. |
| CVE-2023-33010 | A buffer overflow vulnerability in the ID processing function in Zyxel ATP series firmware versions 4.32 through 5.36 Patch 1, USG FLEX series firmware versions 4.50 through 5.36 Patch 1, USG FLEX 50(W) firmware versions 4.25 through 5.36 Patch 1, USG20(W)-VPN firmware versions 4.25 through 5.36 Patch 1, VPN series firmware versions 4.30 through 5.36 Patch 1, ZyWALL/USG series firmware versions 4.25 through 4.73 Patch 1, could allow an unauthenticated attacker to cause denial-of-service (DoS) conditions and even a remote code execution on an affected device. |
| CVE-2023-33009 | A buffer overflow vulnerability in the notification function in Zyxel ATP series firmware versions 4.60 through 5.36 Patch 1, USG FLEX series firmware versions 4.60 through 5.36 Patch 1, USG FLEX 50(W) firmware versions 4.60 through 5.36 Patch 1, USG20(W)-VPN firmware versions 4.60 through 5.36 Patch 1, VPN series firmware versions 4.60 through 5.36 Patch 1, ZyWALL/USG series firmware versions 4.60 through 4.73 Patch 1, could allow an unauthenticated attacker to cause denial-of-service (DoS) conditions and even a remote code execution on an affected device. |
| CVE-2023-32634 | An authentication bypass vulnerability exists in the CiRpcServerThread() functionality of SoftEther VPN 5.01.9674 and 4.41-9782-beta. An attacker can perform a local man-in-the-middle attack to trigger this vulnerability. |
| CVE-2023-32348 | Teltonika’s Remote Management System versions prior to 4.10.0 contain a virtual private network (VPN) hub feature for cross-device communication that uses OpenVPN. It connects new devices in a manner that allows the new device to communicate with all Teltonika devices connected to the VPN. The OpenVPN server also allows users to route through it. An attacker could route a connection to a remote server through the OpenVPN server, enabling them to scan and access data from other Teltonika devices connected to the VPN. |
| CVE-2023-32275 | An information disclosure vulnerability exists in the CtEnumCa() functionality of SoftEther VPN 4.41-9782-beta and 5.01.9674. Specially crafted network packets can lead to a disclosure of sensitive information. An attacker can send packets to trigger this vulnerability. |
| CVE-2023-31192 | An information disclosure vulnerability exists in the ClientConnect() functionality of SoftEther VPN 5.01.9674. A specially crafted network packet can lead to a disclosure of sensitive information. An attacker can perform a man-in-the-middle attack to trigger this vulnerability. |
| CVE-2023-30328 | An issue in the helper tool of Mailbutler GmbH Shimo VPN Client for macOS v5.0.4 allows attackers to bypass authentication via PID re-use. |
| CVE-2023-28771 | Improper error message handling in Zyxel ZyWALL/USG series firmware versions 4.60 through 4.73, VPN series firmware versions 4.60 through 5.35, USG FLEX series firmware versions 4.60 through 5.35, and ATP series firmware versions 4.60 through 5.35, which could allow an unauthenticated attacker to execute some OS commands remotely by sending crafted packets to an affected device. |
| CVE-2023-28767 | The configuration parser fails to sanitize user-controlled input in the Zyxel ATP series firmware versions 5.10 through 5.36, USG FLEX series firmware versions 5.00 through 5.36, USG FLEX 50(W) series firmware versions 5.10 through 5.36, USG20(W)-VPN series firmware versions 5.10 through 5.36, and VPN series firmware versions 5.00 through 5.36. An unauthenticated, LAN-based attacker could leverage the vulnerability to inject some operating system (OS) commands into the device configuration data on an affected device when the cloud management mode is enabled. |
| CVE-2023-28461 | Array Networks Array AG Series and vxAG (9.4.0.481 and earlier) allow remote code execution. An attacker can browse the filesystem on the SSL VPN gateway using a flags attribute in an HTTP header without authentication. The product could then be exploited through a vulnerable URL. The 2023-03-09 vendor advisory stated "a new Array AG release with the fix will be available soon." |
| CVE-2023-28182 | The issue was addressed with improved authentication. This issue is fixed in macOS Ventura 13.3, iOS 16.4 and iPadOS 16.4, iOS 15.7.4 and iPadOS 15.7.4, macOS Monterey 12.6.4, macOS Big Sur 11.7.5. A user in a privileged network position may be able to spoof a VPN server that is configured with EAP-only authentication on a device. |
| CVE-2023-28123 | A permission misconfiguration in UI Desktop for Windows (Version 0.59.1.71 and earlier) could allow an user to hijack VPN credentials while UID VPN is starting.This vulnerability is fixed in Version 0.62.3 and later. |
| CVE-2023-27997 | A heap-based buffer overflow vulnerability [CWE-122] in FortiOS version 7.2.4 and below, version 7.0.11 and below, version 6.4.12 and below, version 6.0.16 and below and FortiProxy version 7.2.3 and below, version 7.0.9 and below, version 2.0.12 and below, version 1.2 all versions, version 1.1 all versions SSL-VPN may allow a remote attacker to execute arbitrary code or commands via specifically crafted requests. |
| CVE-2023-27991 | The post-authentication command injection vulnerability in the CLI command of Zyxel ATP series firmware versions 4.32 through 5.35, USG FLEX series firmware versions 4.50 through 5.35, USG FLEX 50(W) firmware versions 4.16 through 5.35, USG20(W)-VPN firmware versions 4.16 through 5.35, and VPN series firmware versions 4.30 through 5.35, which could allow an authenticated attacker to execute some OS commands remotely. |
| CVE-2023-27990 | The cross-site scripting (XSS) vulnerability in Zyxel ATP series firmware versions 4.32 through 5.35, USG FLEX series firmware versions 4.50 through 5.35, USG FLEX 50(W) firmware versions 4.16 through 5.35, USG20(W)-VPN firmware versions 4.16 through 5.35, and VPN series firmware versions 4.30 through 5.35, which could allow an authenticated attacker with administrator privileges to store malicious scripts in a vulnerable device. A successful XSS attack could then result in the stored malicious scripts being executed when the user visits the Logs page of the GUI on the device. |
| CVE-2023-27516 | An authentication bypass vulnerability exists in the CiRpcAccepted() functionality of SoftEther VPN 4.41-9782-beta and 5.01.9674. A specially crafted network packet can lead to unauthorized access. An attacker can send a network request to trigger this vulnerability. |
| CVE-2023-27395 | A heap-based buffer overflow vulnerability exists in the vpnserver WpcParsePacket() functionality of SoftEther VPN 4.41-9782-beta, 5.01.9674 and 5.02. A specially crafted network packet can lead to arbitrary code execution. An attacker can perform a man-in-the-middle attack to trigger this vulnerability. |
| CVE-2023-25774 | A denial-of-service vulnerability exists in the vpnserver ConnectionAccept() functionality of SoftEther VPN 5.02. A set of specially crafted network connections can lead to denial of service. An attacker can send a sequence of malicious packets to trigger this vulnerability. |
| CVE-2023-24497 | Cross-site scripting (xss) vulnerabilities exist in the requestHandlers.js detail_device functionality of Milesight VPN v2.0.2. A specially-crafted HTTP request can lead to arbitrary Javascript code injection. An attacker can send an HTTP request to trigger these vulnerabilities.This XSS is exploited through the remote_subnet field of the database |
| CVE-2023-24496 | Cross-site scripting (xss) vulnerabilities exist in the requestHandlers.js detail_device functionality of Milesight VPN v2.0.2. A specially-crafted HTTP request can lead to arbitrary Javascript code injection. An attacker can send an HTTP request to trigger these vulnerabilities.This XSS is exploited through the name field of the database. |
| CVE-2023-23907 | A directory traversal vulnerability exists in the server.js start functionality of Milesight VPN v2.0.2. A specially-crafted network request can lead to arbitrary file read. An attacker can send a network request to trigger this vulnerability. |
| CVE-2023-23581 | A denial-of-service vulnerability exists in the vpnserver EnSafeHttpHeaderValueStr functionality of SoftEther VPN 5.01.9674 and 5.02. A specially crafted network packet can lead to denial of service. |
| CVE-2023-22918 | A post-authentication information exposure vulnerability in the CGI program of Zyxel ATP series firmware versions 4.32 through 5.35, USG FLEX series firmware versions 4.50 through 5.35, USG FLEX 50(W) firmware versions 4.16 through 5.35, USG20(W)-VPN firmware versions 4.16 through 5.35, VPN series firmware versions 4.30 through 5.35, NWA110AX firmware version 6.50(ABTG.2) and earlier versions, WAC500 firmware version 6.50(ABVS.0) and earlier versions, and WAX510D firmware version 6.50(ABTF.2) and earlier versions, which could allow a remote authenticated attacker to retrieve encrypted information of the administrator on an affected device. |
| CVE-2023-22917 | A buffer overflow vulnerability in the “sdwan_iface_ipc” binary of Zyxel ATP series firmware versions 5.10 through 5.32, USG FLEX series firmware versions 5.00 through 5.32, USG FLEX 50(W) firmware versions 5.10 through 5.32, USG20(W)-VPN firmware versions 5.10 through 5.32, and VPN series firmware versions 5.00 through 5.35, which could allow a remote unauthenticated attacker to cause a core dump with a request error message on a vulnerable device by uploading a crafted configuration file. |
| CVE-2023-22916 | The configuration parser of Zyxel ATP series firmware versions 5.10 through 5.35, USG FLEX series firmware versions 5.00 through 5.35, USG FLEX 50(W) firmware versions 5.10 through 5.35, USG20(W)-VPN firmware versions 5.10 through 5.35, and VPN series firmware versions 5.00 through 5.35, which fails to properly sanitize user input. A remote unauthenticated attacker could leverage the vulnerability to modify device configuration data, resulting in DoS conditions on an affected device if the attacker could trick an authorized administrator to switch the management mode to the cloud mode. |
| CVE-2023-22915 | A buffer overflow vulnerability in the “fbwifi_forward.cgi” CGI program of Zyxel USG FLEX series firmware versions 4.50 through 5.35, USG FLEX 50(W) firmware versions 4.30 through 5.35, USG20(W)-VPN firmware versions 4.30 through 5.35, and VPN series firmware versions 4.30 through 5.35, which could allow a remote unauthenticated attacker to cause DoS conditions by sending a crafted HTTP request if the Facebook WiFi function were enabled on an affected device. |
| CVE-2023-22914 | A path traversal vulnerability in the “account_print.cgi” CGI program of Zyxel USG FLEX series firmware versions 4.50 through 5.35, and VPN series firmware versions 4.30 through 5.35, which could allow a remote authenticated attacker with administrator privileges to execute unauthorized OS commands in the “tmp” directory by uploading a crafted file if the hotspot function were enabled. |
| CVE-2023-22913 | A post-authentication command injection vulnerability in the “account_operator.cgi” CGI program of Zyxel USG FLEX series firmware versions 4.50 through 5.35, and VPN series firmware versions 4.30 through 5.35, which could allow a remote authenticated attacker to modify device configuration data, resulting in denial-of-service (DoS) conditions on an affected device. |
| CVE-2023-22844 | An authentication bypass vulnerability exists in the requestHandlers.js verifyToken functionality of Milesight VPN v2.0.2. A specially-crafted network request can lead to authentication bypass. An attacker can send a network request to trigger this vulnerability. |
| CVE-2023-22417 | A Missing Release of Memory after Effective Lifetime vulnerability in the Flow Processing Daemon (flowd) of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). In an IPsec VPN environment, a memory leak will be seen if a DH or ECDH group is configured. Eventually the flowd process will crash and restart. This issue affects Juniper Networks Junos OS on SRX Series: All versions prior to 19.3R3-S7; 19.4 versions prior to 19.4R2-S8, 19.4R3-S10; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2. |
| CVE-2023-22371 | An os command injection vulnerability exists in the liburvpn.so create_private_key functionality of Milesight VPN v2.0.2. A specially-crafted network request can lead to command execution. An attacker can send a malicious packet to trigger this vulnerability. |
| CVE-2023-22325 | A denial of service vulnerability exists in the DCRegister DDNS_RPC_MAX_RECV_SIZE functionality of SoftEther VPN 4.41-9782-beta, 5.01.9674 and 5.02. A specially crafted network packet can lead to denial of service. An attacker can perform a man-in-the-middle attack to trigger this vulnerability. |
| CVE-2023-22319 | A sql injection vulnerability exists in the requestHandlers.js LoginAuth functionality of Milesight VPN v2.0.2. A specially-crafted network request can lead to authentication bypass. An attacker can send a malicious packet to trigger this vulnerability. |
| CVE-2023-22308 | An integer underflow vulnerability exists in the vpnserver OvsProcessData functionality of SoftEther VPN 5.01.9674 and 5.02. A specially crafted network packet can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability. |
| CVE-2023-21121 | In onResume of AppManagementFragment.java, there is a possible way to prevent users from forgetting a previously connected VPN due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12Android ID: A-205460459 |
| CVE-2023-20275 | A vulnerability in the AnyConnect SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to send packets with another VPN user's source IP address. This vulnerability is due to improper validation of the packet's inner source IP address after decryption. An attacker could exploit this vulnerability by sending crafted packets through the tunnel. A successful exploit could allow the attacker to send a packet impersonating another VPN user's IP address. It is not possible for the attacker to receive return packets. |
| CVE-2023-20269 | A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct a brute force attack in an attempt to identify valid username and password combinations or an authenticated, remote attacker to establish a clientless SSL VPN session with an unauthorized user. This vulnerability is due to improper separation of authentication, authorization, and accounting (AAA) between the remote access VPN feature and the HTTPS management and site-to-site VPN features. An attacker could exploit this vulnerability by specifying a default connection profile/tunnel group while conducting a brute force attack or while establishing a clientless SSL VPN session using valid credentials. A successful exploit could allow the attacker to achieve one or both of the following: Identify valid credentials that could then be used to establish an unauthorized remote access VPN session. Establish a clientless SSL VPN session (only when running Cisco ASA Software Release 9.16 or earlier). Notes: Establishing a client-based remote access VPN tunnel is not possible as these default connection profiles/tunnel groups do not and cannot have an IP address pool configured. This vulnerability does not allow an attacker to bypass authentication. To successfully establish a remote access VPN session, valid credentials are required, including a valid second factor if multi-factor authentication (MFA) is configured. Cisco will release software updates that address this vulnerability. There are workarounds that address this vulnerability. |
| CVE-2023-20264 | A vulnerability in the implementation of Security Assertion Markup Language (SAML) 2.0 single sign-on (SSO) for remote access VPN in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to intercept the SAML assertion of a user who is authenticating to a remote access VPN session. This vulnerability is due to insufficient validation of the login URL. An attacker could exploit this vulnerability by persuading a user to access a site that is under the control of the attacker, allowing the attacker to modify the login URL. A successful exploit could allow the attacker to intercept a successful SAML assertion and use that assertion to establish a remote access VPN session toward the affected device with the identity and permissions of the hijacked user, resulting in access to the protected network. |
| CVE-2023-20247 | A vulnerability in the remote access SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to bypass a configured multiple certificate authentication policy and connect using only a valid username and password. This vulnerability is due to improper error handling during remote access VPN authentication. An attacker could exploit this vulnerability by sending crafted requests during remote access VPN session establishment. A successful exploit could allow the attacker to bypass the configured multiple certificate authentication policy while retaining the privileges and permissions associated with the original connection profile. |
| CVE-2023-20241 | Multiple vulnerabilities in Cisco Secure Client Software, formerly AnyConnect Secure Mobility Client, could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected system. These vulnerabilities are due to an out-of-bounds memory read from Cisco Secure Client Software. An attacker could exploit these vulnerabilities by logging in to an affected device at the same time that another user is accessing Cisco Secure Client on the same system, and then sending crafted packets to a port on that local host. A successful exploit could allow the attacker to crash the VPN Agent service, causing it to be unavailable to all users of the system. To exploit these vulnerabilities, the attacker must have valid credentials on a multi-user system. |
| CVE-2023-20240 | Multiple vulnerabilities in Cisco Secure Client Software, formerly AnyConnect Secure Mobility Client, could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected system. These vulnerabilities are due to an out-of-bounds memory read from Cisco Secure Client Software. An attacker could exploit these vulnerabilities by logging in to an affected device at the same time that another user is accessing Cisco Secure Client on the same system, and then sending crafted packets to a port on that local host. A successful exploit could allow the attacker to crash the VPN Agent service, causing it to be unavailable to all users of the system. To exploit these vulnerabilities, the attacker must have valid credentials on a multi-user system. |
| CVE-2023-20187 | A vulnerability in the Multicast Leaf Recycle Elimination (mLRE) feature of Cisco IOS XE Software for Cisco ASR 1000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to incorrect handling of certain IPv6 multicast packets when they are fanned out more than seven times on an affected device. An attacker could exploit this vulnerability by sending a specific IPv6 multicast or IPv6 multicast VPN (MVPNv6) packet through the affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition. |
| CVE-2023-20178 | A vulnerability in the client update process of Cisco AnyConnect Secure Mobility Client Software for Windows and Cisco Secure Client Software for Windows could allow a low-privileged, authenticated, local attacker to elevate privileges to those of SYSTEM. The client update process is executed after a successful VPN connection is established. This vulnerability exists because improper permissions are assigned to a temporary directory that is created during the update process. An attacker could exploit this vulnerability by abusing a specific function of the Windows installer process. A successful exploit could allow the attacker to execute code with SYSTEM privileges. |
| CVE-2023-20128 | Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities. |
| CVE-2023-20117 | Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities. |
| CVE-2023-20109 | A vulnerability in the Cisco Group Encrypted Transport VPN (GET VPN) feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker who has administrative control of either a group member or a key server to execute arbitrary code on an affected device or cause the device to crash. This vulnerability is due to insufficient validation of attributes in the Group Domain of Interpretation (GDOI) and G-IKEv2 protocols of the GET VPN feature. An attacker could exploit this vulnerability by either compromising an installed key server or modifying the configuration of a group member to point to a key server that is controlled by the attacker. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a denial of service (DoS) condition. For more information, see the Details ["#details"] section of this advisory. |
| CVE-2023-20095 | A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of HTTPS requests. An attacker could exploit this vulnerability by sending crafted HTTPS requests to an affected system. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a DoS condition. |
| CVE-2023-20088 | A vulnerability in the nginx configurations that are provided as part of the VPN-less reverse proxy for Cisco Finesse could allow an unauthenticated, remote attacker to create a denial of service (DoS) condition for new and existing users who are connected through a load balancer. This vulnerability is due to improper IP address filtering by the reverse proxy. An attacker could exploit this vulnerability by sending a series of unauthenticated requests to the reverse proxy. A successful exploit could allow the attacker to cause all current traffic and subsequent requests to the reverse proxy through a load balancer to be dropped, resulting in a DoS condition. |
| CVE-2023-20073 | A vulnerability in the web-based management interface of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to upload arbitrary files to an affected device. This vulnerability is due to insufficient authorization enforcement mechanisms in the context of file uploads. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to upload arbitrary files to the affected device. |
| CVE-2023-20045 | A vulnerability in the web-based management interface of Cisco Small Business RV160 and RV260 Series VPN Routers could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on the affected device. To exploit this vulnerability, the attacker must have valid Administrator-level credentials on the affected device. |
| CVE-2023-20042 | A vulnerability in the AnyConnect SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to an implementation error within the SSL/TLS session handling process that can prevent the release of a session handler under specific conditions. An attacker could exploit this vulnerability by sending crafted SSL/TLS traffic to an affected device, increasing the probability of session handler leaks. A successful exploit could allow the attacker to eventually deplete the available session handler pool, preventing new sessions from being established and causing a DoS condition. |
| CVE-2023-20007 | A vulnerability in the web-based management interface of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code or cause the web-based management process on the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The attacker must have valid administrator credentials. This vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the web-based management process to restart, resulting in a DoS condition. |
| CVE-2022-4901 | Multiple stored XSS vulnerabilities in Sophos Connect versions older than 2.2.90 allow Javascript code to run in the local UI via a malicious VPN configuration that must be manually loaded by the victim. |
| CVE-2022-46783 | An issue was discovered in Stormshield SSL VPN Client before 3.2.0. If multiple address books are used, an attacker may be able to access the other encrypted address book. |
| CVE-2022-46782 | An issue was discovered in Stormshield SSL VPN Client before 3.2.0. A logged-in user, able to only launch the VPNSSL Client, can use the OpenVPN instance to execute malicious code as administrator on the local machine. |
| CVE-2022-45861 | An access of uninitialized pointer vulnerability [CWE-824] in the SSL VPN portal of Fortinet FortiOS version 7.2.0 through 7.2.3, version 7.0.0 through 7.0.9 and before 6.4.11 and FortiProxy version 7.2.0 through 7.2.1, version 7.0.0 through 7.0.7 and before 2.0.11 allows a remote authenticated attacker to crash the sslvpn daemon via an HTTP GET request. |
| CVE-2022-43931 | Out-of-bounds write vulnerability in Remote Desktop Functionality in Synology VPN Plus Server before 1.4.3-0534 and 1.4.4-0635 allows remote attackers to execute arbitrary commands via unspecified vectors. |
| CVE-2022-42475 | A heap-based buffer overflow vulnerability [CWE-122] in FortiOS SSL-VPN 7.2.0 through 7.2.2, 7.0.0 through 7.0.8, 6.4.0 through 6.4.10, 6.2.0 through 6.2.11, 6.0.15 and earlier and FortiProxy SSL-VPN 7.2.0 through 7.2.1, 7.0.7 and earlier may allow a remote unauthenticated attacker to execute arbitrary code or commands via specifically crafted requests. |
| CVE-2022-42469 | A permissive list of allowed inputs vulnerability [CWE-183] in FortiGate version 7.2.3 and below, version 7.0.9 and below Policy-based NGFW Mode may allow an authenticated SSL-VPN user to bypass the policy via bookmarks in the web portal. |
| CVE-2022-41028 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'no vpn schedule name1 WORD name2 WORD policy (failover|backup) description (WORD|null)' command template. |
| CVE-2022-41027 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'vpn schedule name1 WORD name2 WORD policy (failover|backup) description (WORD|null)' command template. |
| CVE-2022-41026 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'no vpn pptp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> mppe (on|off) stateful (on|off) options WORD' command template. |
| CVE-2022-41025 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'vpn pptp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> mppe (on|off) stateful (on|off) options WORD' command template. |
| CVE-2022-41024 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'no vpn pptp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> mppe (on|off) stateful (on|off)' command template. |
| CVE-2022-41023 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'vpn pptp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> mppe (on|off) stateful (on|off)' command template. |
| CVE-2022-41022 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'no vpn l2tp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> auth (on|off) password (WORD|null) options WORD' command template. |
| CVE-2022-41021 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'vpn l2tp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> auth (on|off) password (WORD|null) options WORD' command template. |
| CVE-2022-41020 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'no vpn l2tp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> auth (on|off) password (WORD|null)' command template. |
| CVE-2022-41019 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'vpn l2tp advanced name WORD dns (yes|no) mtu <128-16384> mru <128-16384> auth (on|off) password (WORD|null)' command template. |
| CVE-2022-41018 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'no vpn basic protocol (l2tp|pptp) name WORD server WORD username WORD passsword WORD firmwall (on|off) defroute (on|off) localip A.B.C.D' command template. |
| CVE-2022-41017 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'vpn basic protocol (l2tp|pptp) name WORD server WORD username WORD passsword WORD firmwall (on|off) defroute (on|off) localip A.B.C.D' command template. |
| CVE-2022-41016 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'no vpn basic protocol (l2tp|pptp) name WORD server WORD username WORD passsword WORD firmwall (on|off) defroute (on|off)' command template. |
| CVE-2022-41015 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'vpn basic protocol (l2tp|pptp) name WORD server WORD username WORD passsword WORD firmwall (on|off) defroute (on|off)' command template. |
| CVE-2022-41006 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'no ip static route destination A.B.C.D gateway A.B.C.D mask A.B.C.D metric <0-10> interface (lan|wan|vpn) description WORD' command template. |
| CVE-2022-41005 | Several stack-based buffer overflow vulnerabilities exist in the DetranCLI command parsing functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger these vulnerabilities.This buffer overflow is in the function that manages the 'ip static route destination A.B.C.D gateway A.B.C.D mask A.B.C.D metric <0-10> interface (lan|wan|vpn) description WORD' command template. |
| CVE-2022-40603 | A cross-site scripting (XSS) vulnerability in the CGI program of Zyxel ZyWALL/USG series firmware versions 4.30 through 4.72, VPN series firmware versions 4.30 through 5.31, USG FLEX series firmware versions 4.50 through 5.31, and ATP series firmware versions 4.32 through 5.31, which could allow an attacker to trick a user into visiting a crafted URL with the XSS payload. Then, the attacker could gain access to some browser-based information if the malicious script is executed on the victim’s browser. |
| CVE-2022-39849 | Improper access control in knox_vpn_policy service prior to SMR Oct-2022 Release 1 allows allows unauthorized read of configuration data. |
| CVE-2022-38547 | A post-authentication command injection vulnerability in the CLI command of Zyxel ZyWALL/USG series firmware versions 4.20 through 4.72, VPN series firmware versions 4.30 through 5.32, USG FLEX series firmware versions 4.50 through 5.32, and ATP series firmware versions 4.32 through 5.32, which could allow an authenticated attacker with administrator privileges to execute OS commands. |
| CVE-2022-38368 | An issue was discovered in Aviatrix Gateway before 6.6.5712 and 6.7.x before 6.7.1376. Because Gateway API functions mishandle authentication, an authenticated VPN user can inject arbitrary commands. |
| CVE-2022-37835 | Torguard VPN 4.8, has a vulnerability that allows an attacker to dump sensitive information, such as credentials and information about the server, without admin privileges. |
| CVE-2022-35842 | An exposure of sensitive information to an unauthorized actor vulnerabiltiy [CWE-200] in FortiOS SSL-VPN versions 7.2.0, versions 7.0.0 through 7.0.6 and versions 6.4.0 through 6.4.9 may allow a remote unauthenticated attacker to gain information about LDAP and SAML settings configured in FortiOS. |
| CVE-2022-35416 | H3C SSL VPN through 2022-07-10 allows wnm/login/login.json svpnlang cookie XSS. |
| CVE-2022-34593 | DPTech VPN v8.1.28.0 was discovered to contain an arbitrary file read vulnerability. |
| CVE-2022-33878 | An exposure of sensitive information to an unauthorized actor vulnerabiltiy [CWE-200] in FortiClient for Mac versions 7.0.0 through 7.0.5 may allow a local authenticated attacker to obtain the SSL-VPN password in cleartext via running a logstream for the FortiTray process in the terminal. |
| CVE-2022-33725 | A vulnerability using PendingIntent in Knox VPN prior to SMR Aug-2022 Release 1 allows attackers to access content providers with system privilege. |
| CVE-2022-3337 | It was possible for a user to delete a VPN profile from WARP mobile client on iOS platform despite the Lock WARP switch https://developers.cloudflare.com/cloudflare-one/connections/connect-devices/warp/warp-settings/#lock-warp-switch feature being enabled on Zero Trust Platform. This led to bypassing policies and restrictions enforced for enrolled devices by the Zero Trust platform. |
| CVE-2022-33158 | Trend Micro VPN Proxy Pro version 5.2.1026 and below contains a vulnerability involving some overly permissive folders in a key directory which could allow a local attacker to obtain privilege escalation on an affected system. |
| CVE-2022-3312 | Insufficient validation of untrusted input in VPN in Google Chrome on ChromeOS prior to 106.0.5249.62 allowed a local attacker to bypass managed device restrictions via physical access to the device. (Chromium security severity: Medium) |
| CVE-2022-32988 | Cross Site Scripting (XSS) vulnerability in router Asus DSL-N14U-B1 1.1.2.3_805 via the "*list" parameters (e.g. filter_lwlist, keyword_rulelist, etc) in every ".asp" page containing a list of stored strings. The following asp files are affected: (1) cgi-bin/APP_Installation.asp, (2) cgi-bin/Advanced_ACL_Content.asp, (3) cgi-bin/Advanced_ADSL_Content.asp, (4) cgi-bin/Advanced_ASUSDDNS_Content.asp, (5) cgi-bin/Advanced_AiDisk_ftp.asp, (6) cgi-bin/Advanced_AiDisk_samba.asp, (7) cgi-bin/Advanced_DSL_Content.asp, (8) cgi-bin/Advanced_Firewall_Content.asp, (9) cgi-bin/Advanced_FirmwareUpgrade_Content.asp, (10) cgi-bin/Advanced_GWStaticRoute_Content.asp, (11) cgi-bin/Advanced_IPTV_Content.asp, (12) cgi-bin/Advanced_IPv6_Content.asp, (13) cgi-bin/Advanced_KeywordFilter_Content.asp, (14) cgi-bin/Advanced_LAN_Content.asp, (15) cgi-bin/Advanced_Modem_Content.asp, (16) cgi-bin/Advanced_PortTrigger_Content.asp, (17) cgi-bin/Advanced_QOSUserPrio_Content.asp, (18) cgi-bin/Advanced_QOSUserRules_Content.asp, (19) cgi-bin/Advanced_SettingBackup_Content.asp, (20) cgi-bin/Advanced_System_Content.asp, (21) cgi-bin/Advanced_URLFilter_Content.asp, (22) cgi-bin/Advanced_VPN_PPTP.asp, (23) cgi-bin/Advanced_VirtualServer_Content.asp, (24) cgi-bin/Advanced_WANPort_Content.asp, (25) cgi-bin/Advanced_WAdvanced_Content.asp, (26) cgi-bin/Advanced_WMode_Content.asp, (27) cgi-bin/Advanced_WWPS_Content.asp, (28) cgi-bin/Advanced_Wireless_Content.asp, (29) cgi-bin/Bandwidth_Limiter.asp, (30) cgi-bin/Guest_network.asp, (31) cgi-bin/Main_AccessLog_Content.asp, (32) cgi-bin/Main_AdslStatus_Content.asp, (33) cgi-bin/Main_Spectrum_Content.asp, (34) cgi-bin/Main_WebHistory_Content.asp, (35) cgi-bin/ParentalControl.asp, (36) cgi-bin/QIS_wizard.asp, (37) cgi-bin/QoS_EZQoS.asp, (38) cgi-bin/aidisk.asp, (39) cgi-bin/aidisk/Aidisk-1.asp, (40) cgi-bin/aidisk/Aidisk-2.asp, (41) cgi-bin/aidisk/Aidisk-3.asp, (42) cgi-bin/aidisk/Aidisk-4.asp, (43) cgi-bin/blocking.asp, (44) cgi-bin/cloud_main.asp, (45) cgi-bin/cloud_router_sync.asp, (46) cgi-bin/cloud_settings.asp, (47) cgi-bin/cloud_sync.asp, (48) cgi-bin/device-map/DSL_dashboard.asp, (49) cgi-bin/device-map/clients.asp, (50) cgi-bin/device-map/disk.asp, (51) cgi-bin/device-map/internet.asp, (52) cgi-bin/error_page.asp, (53) cgi-bin/index.asp, (54) cgi-bin/index2.asp, (55) cgi-bin/qis/QIS_PTM_manual_setting.asp, (56) cgi-bin/qis/QIS_admin_pass.asp, (57) cgi-bin/qis/QIS_annex_setting.asp, (58) cgi-bin/qis/QIS_bridge_cfg_tmp.asp, (59) cgi-bin/qis/QIS_detect.asp, (60) cgi-bin/qis/QIS_finish.asp, (61) cgi-bin/qis/QIS_ipoa_cfg_tmp.asp, (62) cgi-bin/qis/QIS_manual_setting.asp, (63) cgi-bin/qis/QIS_mer_cfg.asp, (64) cgi-bin/qis/QIS_mer_cfg_tmp.asp, (65) cgi-bin/qis/QIS_ppp_cfg.asp, (66) cgi-bin/qis/QIS_ppp_cfg_tmp.asp, (67) cgi-bin/qis/QIS_wireless.asp, (68) cgi-bin/query_wan_status.asp, (69) cgi-bin/query_wan_status2.asp, and (70) cgi-bin/start_apply.asp. |
| CVE-2022-3226 | An OS command injection vulnerability allows admins to execute code via SSL VPN configuration uploads in Sophos Firewall releases older than version 19.5 GA. |
| CVE-2022-30526 | A privilege escalation vulnerability was identified in the CLI command of Zyxel USG FLEX 100(W) firmware versions 4.50 through 5.30, USG FLEX 200 firmware versions 4.50 through 5.30, USG FLEX 500 firmware versions 4.50 through 5.30, USG FLEX 700 firmware versions 4.50 through 5.30, USG FLEX 50(W) firmware versions 4.16 through 5.30, USG20(W)-VPN firmware versions 4.16 through 5.30, ATP series firmware versions 4.32 through 5.30, VPN series firmware versions 4.30 through 5.30, USG/ZyWALL series firmware versions 4.09 through 4.72, which could allow a local attacker to execute some OS commands with root privileges in some directories on a vulnerable device. |
| CVE-2022-30525 | A OS command injection vulnerability in the CGI program of Zyxel USG FLEX 100(W) firmware versions 5.00 through 5.21 Patch 1, USG FLEX 200 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 500 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 700 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 50(W) firmware versions 5.10 through 5.21 Patch 1, USG20(W)-VPN firmware versions 5.10 through 5.21 Patch 1, ATP series firmware versions 5.10 through 5.21 Patch 1, VPN series firmware versions 4.60 through 5.21 Patch 1, which could allow an attacker to modify specific files and then execute some OS commands on a vulnerable device. |
| CVE-2022-29730 | USR IOT 4G LTE Industrial Cellular VPN Router v1.0.36 was discovered to contain hard-coded credentials for its highest privileged account. The credentials cannot be altered through normal operation of the device. |
| CVE-2022-29383 | NETGEAR ProSafe SSL VPN firmware FVS336Gv2 and FVS336Gv3 was discovered to contain a SQL injection vulnerability via USERDBDomains.Domainname at cgi-bin/platform.cgi. |
| CVE-2022-27636 | On F5 BIG-IP APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, as well as F5 BIG-IP APM Clients 7.x versions prior to 7.2.1.5, BIG-IP Edge Client may log sensitive APM session-related information when VPN is launched on a Windows system. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated |
| CVE-2022-27535 | Kaspersky VPN Secure Connection for Windows version up to 21.5 was vulnerable to arbitrary file deletion via abuse of its 'Delete All Service Data And Reports' feature by the local authenticated attacker. |
| CVE-2022-26634 | HMA VPN v5.3.5913.0 contains an unquoted service path which allows attackers to escalate privileges to the system level. |
| CVE-2022-26532 | A argument injection vulnerability in the 'packet-trace' CLI command of Zyxel USG/ZyWALL series firmware versions 4.09 through 4.71, USG FLEX series firmware versions 4.50 through 5.21, ATP series firmware versions 4.32 through 5.21, VPN series firmware versions 4.30 through 5.21, NSG series firmware versions 1.00 through 1.33 Patch 4, NXC2500 firmware version 6.10(AAIG.3) and earlier versions, NAP203 firmware version 6.25(ABFA.7) and earlier versions, NWA50AX firmware version 6.25(ABYW.5) and earlier versions, WAC500 firmware version 6.30(ABVS.2) and earlier versions, and WAX510D firmware version 6.30(ABTF.2) and earlier versions, that could allow a local authenticated attacker to execute arbitrary OS commands by including crafted arguments to the CLI command. |
| CVE-2022-26531 | Multiple improper input validation flaws were identified in some CLI commands of Zyxel USG/ZyWALL series firmware versions 4.09 through 4.71, USG FLEX series firmware versions 4.50 through 5.21, ATP series firmware versions 4.32 through 5.21, VPN series firmware versions 4.30 through 5.21, NSG series firmware versions 1.00 through 1.33 Patch 4, NXC2500 firmware version 6.10(AAIG.3) and earlier versions, NAP203 firmware version 6.25(ABFA.7) and earlier versions, NWA50AX firmware version 6.25(ABYW.5) and earlier versions, WAC500 firmware version 6.30(ABVS.2) and earlier versions, and WAX510D firmware version 6.30(ABTF.2) and earlier versions, that could allow a local authenticated attacker to cause a buffer overflow or a system crash via a crafted payload. |
| CVE-2022-25166 | An issue was discovered in Amazon AWS VPN Client 2.0.0. It is possible to include a UNC path in the OpenVPN configuration file when referencing file paths for parameters (such as auth-user-pass). When this file is imported and the client attempts to validate the file path, it performs an open operation on the path and leaks the user's Net-NTLMv2 hash to an external server. This could be exploited by having a user open a crafted malicious ovpn configuration file. |
| CVE-2022-25165 | An issue was discovered in Amazon AWS VPN Client 2.0.0. A TOCTOU race condition exists during the validation of VPN configuration files. This allows parameters outside of the AWS VPN Client allow list to be injected into the configuration file prior to the AWS VPN Client service (running as SYSTEM) processing the file. Dangerous arguments can be injected by a low-level user such as log, which allows an arbitrary destination to be specified for writing log files. This leads to an arbitrary file write as SYSTEM with partial control over the files content. This can be abused to cause an elevation of privilege or denial of service. |
| CVE-2022-24141 | The iTopVPNmini.exe component of iTop VPN 3.2 will try to connect to datastate_iTopVPN_Pipe_Server on a loop. An attacker that opened a named pipe with the same name can use it to gain the token of another user by listening for connections and abusing ImpersonateNamedPipeClient(). |
| CVE-2022-24140 | IOBit Advanced System Care 15, iTop Screen Recorder 2.1, iTop VPN 3.2, Driver Booster 9, and iTop Screenshot sends HTTP requests in their update procedure in order to download a config file. After downloading the config file, the products will parse the HTTP location of the update from the file and will try to install the update automatically with ADMIN privileges. An attacker Intercepting this communication can supply the product a fake config file with malicious locations for the updates thus gaining a remote code execution on an endpoint. |
| CVE-2022-23746 | The IPsec VPN blade has a dedicated portal for downloading and connecting through SSL Network Extender (SNX). If the portal is configured for username/password authentication, it is vulnerable to a brute-force attack on usernames and passwords. |
| CVE-2022-22281 | A buffer overflow vulnerability in the SonicWall SSL-VPN NetExtender Windows Client (32 and 64 bit) in 10.2.322 and earlier versions, allows an attacker to potentially execute arbitrary code in the host windows operating system. |
| CVE-2022-20933 | A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z3 Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit this vulnerability by crafting a malicious request and sending it to the affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to crash and restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and re-authenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention. Cisco Meraki has released software updates that address this vulnerability. |
| CVE-2022-20928 | A vulnerability in the authentication and authorization flows for VPN connections in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to establish a connection as a different user. This vulnerability is due to a flaw in the authorization verifications during the VPN authentication flow. An attacker could exploit this vulnerability by sending a crafted packet during a VPN authentication. The attacker must have valid credentials to establish a VPN connection. A successful exploit could allow the attacker to establish a VPN connection with access privileges from a different user. |
| CVE-2022-20923 | A vulnerability in the IPSec VPN Server authentication functionality of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to bypass authentication controls and access the IPSec VPN network. This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to the VPN from an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and access the IPSec VPN network. The attacker may obtain privileges that are the same level as an administrative user, depending on the crafted credentials that are used. Cisco has not released software updates that address this vulnerability. |
| CVE-2022-20915 | A vulnerability in the implementation of IPv6 VPN over MPLS (6VPE) with Zone-Based Firewall (ZBFW) of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper error handling of an IPv6 packet that is forwarded from an MPLS and ZBFW-enabled interface in a 6VPE deployment. An attacker could exploit this vulnerability by sending a crafted IPv6 packet sourced from a device on the IPv6-enabled virtual routing and forwarding (VRF) interface through the affected device. A successful exploit could allow the attacker to reload the device, resulting in a DoS condition. |
| CVE-2022-20795 | A vulnerability in the implementation of the Datagram TLS (DTLS) protocol in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization, resulting in a denial of service (DoS) condition. This vulnerability is due to suboptimal processing that occurs when establishing a DTLS tunnel as part of an AnyConnect SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted DTLS traffic to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected VPN headend device. This could cause existing DTLS tunnels to stop passing traffic and prevent new DTLS tunnels from establishing, resulting in a DoS condition. Note: When the attack traffic stops, the device recovers gracefully. |
| CVE-2022-20759 | A vulnerability in the web services interface for remote access VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, but unprivileged, remote attacker to elevate privileges to level 15. This vulnerability is due to improper separation of authentication and authorization scopes. An attacker could exploit this vulnerability by sending crafted HTTPS messages to the web services interface of an affected device. A successful exploit could allow the attacker to gain privilege level 15 access to the web management interface of the device. This includes privilege level 15 access to the device using management tools like the Cisco Adaptive Security Device Manager (ASDM) or the Cisco Security Manager (CSM). Note: With Cisco FTD Software, the impact is lower than the CVSS score suggests because the affected web management interface allows for read access only. |
| CVE-2022-20758 | A vulnerability in the implementation of the Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the incorrect processing of a BGP update message that contains specific EVPN attributes. An attacker could exploit this vulnerability by sending a BGP update message that contains specific EVPN attributes. To exploit this vulnerability, an attacker must control a BGP speaker that has an established trusted peer connection to an affected device that is configured with the address family L2VPN EVPN to receive and process the update message. This vulnerability cannot be exploited by any data that is initiated by clients on the Layer 2 network or by peers that are not configured to accept the L2VPN EVPN address family. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP updates only from explicitly defined peers. For this vulnerability to be exploited, the malicious BGP update message must either come from a configured, valid BGP peer or be injected by the attacker into the affected BGP network on an existing, valid TCP connection to a BGP peer. |
| CVE-2022-20745 | A vulnerability in the web services interface for remote access VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| CVE-2022-20742 | A vulnerability in an IPsec VPN library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to read or modify data within an IPsec IKEv2 VPN tunnel. This vulnerability is due to an improper implementation of Galois/Counter Mode (GCM) ciphers. An attacker in a man-in-the-middle position could exploit this vulnerability by intercepting a sufficient number of encrypted messages across an affected IPsec IKEv2 VPN tunnel and then using cryptanalytic techniques to break the encryption. A successful exploit could allow the attacker to decrypt, read, modify, and re-encrypt data that is transmitted across an affected IPsec IKEv2 VPN tunnel. |
| CVE-2022-20737 | A vulnerability in the handler for HTTP authentication for resources accessed through the Clientless SSL VPN portal of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device or to obtain portions of process memory from an affected device. This vulnerability is due to insufficient bounds checking when parsing specific HTTP authentication messages. An attacker could exploit this vulnerability by sending malicious traffic to an affected device acting as a VPN Gateway. To send this malicious traffic, an attacker would need to control a web server that can be accessed through the Clientless SSL VPN portal. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition, or to retrieve bytes from the device process memory that may contain sensitive information. |
| CVE-2022-20715 | A vulnerability in the remote access SSL VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper validation of errors that are logged as a result of client connections that are made using remote access VPN. An attacker could exploit this vulnerability by sending crafted requests to an affected system. A successful exploit could allow the attacker to cause the affected device to restart, resulting in a DoS condition. |
| CVE-2022-20713 | A vulnerability in the VPN web client services component of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct browser-based attacks against users of an affected device. This vulnerability is due to improper validation of input that is passed to the VPN web client services component before being returned to the browser that is in use. An attacker could exploit this vulnerability by persuading a user to visit a website that is designed to pass malicious requests to a device that is running Cisco ASA Software or Cisco FTD Software and has web services endpoints supporting VPN features enabled. A successful exploit could allow the attacker to reflect malicious input from the affected device to the browser that is in use and conduct browser-based attacks, including cross-site scripting attacks. The attacker could not directly impact the affected device. |
| CVE-2022-20354 | In onDefaultNetworkChanged of Vpn.java, there is a possible way to disable VPN due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12LAndroid ID: A-219546241 |
| CVE-2022-20336 | In Settings, there is a possible installed application disclosure due to a missing permission check. This could lead to local information disclosure of applications allow-listed to use the network during VPN lockdown mode with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-177239688 |
| CVE-2022-2030 | A directory traversal vulnerability caused by specific character sequences within an improperly sanitized URL was identified in some CGI programs of Zyxel USG FLEX 100(W) firmware versions 4.50 through 5.30, USG FLEX 200 firmware versions 4.50 through 5.30, USG FLEX 500 firmware versions 4.50 through 5.30, USG FLEX 700 firmware versions 4.50 through 5.30, USG FLEX 50(W) firmware versions 4.16 through 5.30, USG20(W)-VPN firmware versions 4.16 through 5.30, ATP series firmware versions 4.32 through 5.30, VPN series firmware versions 4.30 through 5.30, USG/ZyWALL series firmware versions 4.11 through 4.72, that could allow an authenticated attacker to access some restricted files on a vulnerable device. |
| CVE-2022-20145 | In startLegacyVpnPrivileged of Vpn.java, there is a possible way to retrieve VPN credentials due to a protocol downgrade attack. This could lead to remote escalation of privilege if a malicious Wi-Fi AP is used, with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-201660636 |
| CVE-2022-1703 | Improper neutralization of special elements in the SonicWall SSL-VPN SMA100 series management interface allows a remote authenticated attacker to inject OS Commands which potentially leads to remote command execution vulnerability or denial of service (DoS) attack. |
| CVE-2022-0910 | A downgrade from two-factor authentication to one-factor authentication vulnerability in the CGI program of Zyxel USG/ZyWALL series firmware versions 4.32 through 4.71, USG FLEX series firmware versions 4.50 through 5.21, ATP series firmware versions 4.32 through 5.21, and VPN series firmware versions 4.32 through 5.21, that could allow an authenticated attacker to bypass the second authentication phase to connect the IPsec VPN server even though the two-factor authentication (2FA) was enabled. |
| CVE-2022-0734 | A cross-site scripting vulnerability was identified in the CGI program of Zyxel USG/ZyWALL series firmware versions 4.35 through 4.70, USG FLEX series firmware versions 4.50 through 5.20, ATP series firmware versions 4.35 through 5.20, and VPN series firmware versions 4.35 through 5.20, that could allow an attacker to obtain some information stored in the user's browser, such as cookies or session tokens, via a malicious script. |
| CVE-2022-0517 | Mozilla VPN can load an OpenSSL configuration file from an unsecured directory. A user or attacker with limited privileges could leverage this to launch arbitrary code with SYSTEM privilege. This vulnerability affects Mozilla VPN < 2.7.1. |
| CVE-2022-0342 | An authentication bypass vulnerability in the CGI program of Zyxel USG/ZyWALL series firmware versions 4.20 through 4.70, USG FLEX series firmware versions 4.50 through 5.20, ATP series firmware versions 4.32 through 5.20, VPN series firmware versions 4.30 through 5.20, and NSG series firmware versions V1.20 through V1.33 Patch 4, which could allow an attacker to bypass the web authentication and obtain administrative access of the device. |
| CVE-2021-45810 | GlobalProtect-openconnect versions prior to 2.0.0 (exclusive) are affected by incorrect access control in GPService through DBUS, GUI. The way GlobalProtect-Openconnect is set up enables arbitrary users to start a VPN connection to arbitrary servers. By hosting an openconnect compatible server, the attack can redirect the entire host's traffic via their own server. |
| CVE-2021-44466 | Bitmask Riseup VPN 0.21.6 contains a local privilege escalation flaw due to improper access controls. When the software is installed with a non-default installation directory off of the system root, the installer fails to properly set ACLs. This allows lower privileged users to replace the VPN executable with a malicious one. When a higher privileged user such as an Administrator launches that executable, it is possible for the lower privileged user to escalate to Administrator privileges. |
| CVE-2021-4198 | A NULL Pointer Dereference vulnerability in the messaging_ipc.dll component as used in Bitdefender Total Security, Internet Security, Antivirus Plus, Endpoint Security Tools, VPN Standalone allows an attacker to arbitrarily crash product processes and generate crashdump files. This issue affects: Bitdefender Total Security versions prior to 26.0.3.29. Bitdefender Internet Security versions prior to 26.0.3.29. Bitdefender Antivirus Plus versions prior to 26.0.3.29. Bitdefender Endpoint Security Tools versions prior to 7.2.2.92. Bitdefender VPN Standalone versions prior to 25.5.0.48. |
| CVE-2021-41583 | vpn-user-portal (aka eduVPN or Let's Connect!) before 2.3.14, as packaged for Debian 10, Debian 11, and Fedora, allows remote authenticated users to obtain OS filesystem access, because of the interaction of QR codes with an exec that uses the -r option. This can be leveraged to obtain additional VPN access. |
| CVE-2021-41032 | An improper access control vulnerability [CWE-284] in FortiOS versions 6.4.8 and prior and 7.0.3 and prior may allow an authenticated attacker with a restricted user profile to gather sensitive information and modify the SSL-VPN tunnel status of other VDOMs using specific CLI commands. |
| CVE-2021-40125 | A vulnerability in the Internet Key Exchange Version 2 (IKEv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. This vulnerability is due to improper control of a resource. An attacker with the ability to spoof a trusted IKEv2 site-to-site VPN peer and in possession of valid IKEv2 credentials for that peer could exploit this vulnerability by sending malformed, authenticated IKEv2 messages to an affected device. A successful exploit could allow the attacker to trigger a reload of the device. |
| CVE-2021-39773 | In VpnManagerService, there is a possible disclosure of installed VPN packages due to side channel information disclosure. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-12LAndroid ID: A-191276656 |
| CVE-2021-37190 | A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.0 SP2). The affected software has an information disclosure vulnerability that could allow an attacker to retrieve VPN connection for a known user. |
| CVE-2021-36809 | A local attacker can overwrite arbitrary files on the system with VPN client logs using administrator privileges, potentially resulting in a denial of service and data loss, in all versions of Sophos SSL VPN client. |
| CVE-2021-35523 | Securepoint SSL VPN Client v2 before 2.0.32 on Windows has unsafe configuration handling that enables local privilege escalation to NT AUTHORITY\SYSTEM. A non-privileged local user can modify the OpenVPN configuration stored under "%APPDATA%\Securepoint SSL VPN" and add a external script file that is executed as privileged user. |
| CVE-2021-35029 | An authentication bypasss vulnerability in the web-based management interface of Zyxel USG/Zywall series firmware versions 4.35 through 4.64 and USG Flex, ATP, and VPN series firmware versions 4.35 through 5.01, which could allow a remote attacker to execute arbitrary commands on an affected device. |
| CVE-2021-34788 | A vulnerability in the shared library loading mechanism of Cisco AnyConnect Secure Mobility Client for Linux and Mac OS could allow an authenticated, local attacker to perform a shared library hijacking attack on an affected device if the VPN Posture (HostScan) Module is installed on the AnyConnect client. This vulnerability is due to a race condition in the signature verification process for shared library files that are loaded on an affected device. An attacker could exploit this vulnerability by sending a series of crafted interprocess communication (IPC) messages to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected device with root privileges. To exploit this vulnerability, the attacker must have a valid account on the system. |
| CVE-2021-34579 | In Phoenix Contact: FL MGUARD DM version 1.12.0 and 1.13.0 access to the Apache web server being installed as part of the FL MGUARD DM on Microsoft Windows does not require login credentials even if configured during installation.Attackers with network access to the Apache web server can download and therefore read mGuard configuration profiles (“ATV profiles”). Such configuration profiles may contain sensitive information, e.g. private keys associated with IPsec VPN connections. |
| CVE-2021-31814 | In Stormshield 1.1.0, and 2.1.0 through 2.9.0, an attacker can block a client from accessing the VPN and can obtain sensitive information through the SN VPN SSL Client. |
| CVE-2021-31776 | Aviatrix VPN Client before 2.14.14 on Windows has an unquoted search path that enables local privilege escalation to the SYSTEM user, if the machine is misconfigured to allow unprivileged users to write to directories that are supposed to be restricted to administrators. |
| CVE-2021-30874 | An authorization issue was addressed with improved state management. This issue is fixed in iOS 15 and iPadOS 15. A VPN configuration may be installed by an app without user permission. |
| CVE-2021-3056 | A memory corruption vulnerability in Palo Alto Networks PAN-OS GlobalProtect Clientless VPN enables an authenticated attacker to execute arbitrary code with root user privileges during SAML authentication. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14; PAN-OS 9.1 versions earlier than PAN-OS 9.1.9; PAN-OS 10.0 versions earlier than PAN-OS 10.0.1. Prisma Access customers with Prisma Access 2.1 Preferred firewalls are impacted by this issue. |
| CVE-2021-29978 | Multiple low security issues were discovered and fixed in a security audit of Mozilla VPN 2.x branch as part of a 3rd party security audit. This vulnerability affects Mozilla VPN < 2.3. |
| CVE-2021-28918 | Improper input validation of octal strings in netmask npm package v1.0.6 and below allows unauthenticated remote attackers to perform indeterminate SSRF, RFI, and LFI attacks on many of the dependent packages. A remote unauthenticated attacker can bypass packages relying on netmask to filter IPs and reach critical VPN or LAN hosts. |
| CVE-2021-27932 | Stormshield Network Security (SNS) VPN SSL Client 2.1.0 through 2.8.0 has Insecure Permissions. |
| CVE-2021-27406 | An attacker can take leverage on PerFact OpenVPN-Client versions 1.4.1.0 and prior to send the config command from any application running on the local host machine to force the back-end server into initializing a new open-VPN instance with arbitrary open-VPN configuration. This could result in the attacker achieving execution with privileges of a SYSTEM user. |
| CVE-2021-26107 | An improper access control vulnerability [CWE-284] in FortiManager versions 6.4.4 and 6.4.5 may allow an authenticated attacker with a restricted user profile to modify the VPN tunnel status of other VDOMs using VPN Manager. |
| CVE-2021-26103 | An insufficient verification of data authenticity vulnerability (CWE-345) in the user interface of FortiProxy verison 2.0.3 and below, 1.2.11 and below and FortiGate verison 7.0.0, 6.4.6 and below, 6.2.9 and below of SSL VPN portal may allow a remote, unauthenticated attacker to conduct a cross-site request forgery (CSRF) attack . Only SSL VPN in web mode or full mode are impacted by this vulnerability. |
| CVE-2021-26092 | Failure to sanitize input in the SSL VPN web portal of FortiOS 5.2.10 through 5.2.15, 5.4.0 through 5.4.13, 5.6.0 through 5.6.14, 6.0.0 through 6.0.12, 6.2.0 through 6.2.7, 6.4.0 through 6.4.4; and FortiProxy 1.2.0 through 1.2.9, 2.0.0 through 2.0.1 may allow a remote unauthenticated attacker to perform a reflected Cross-site Scripting (XSS) attack by sending a request to the error page with malicious GET parameters. |
| CVE-2021-23890 | Information leak vulnerability in the Agent Handler of McAfee ePolicy Orchestrator (ePO) prior to 5.10 Update 10 allows an unauthenticated user to download McAfee product packages (specifically McAfee Agent) available in ePO repository and install them on their own machines to have it managed and then in turn get policy details from the ePO server. This can only happen when the ePO Agent Handler is installed in a Demilitarized Zone (DMZ) to service machines not connected to the network through a VPN. |
| CVE-2021-23002 | When using BIG-IP APM 16.0.x before 16.0.1.1, 15.1.x before 15.1.2.1, 14.1.x before 14.1.4, 13.1.x before 13.1.3.6, or all 12.1.x and 11.6.x versions or Edge Client versions 7.2.1.x before 7.2.1.1, 7.1.9.x before 7.1.9.8, or 7.1.8.x before 7.1.8.5, the session ID is visible in the arguments of the f5vpn.exe command when VPN is launched from the browser on a Windows system. Addressing this issue requires both the client and server fixes. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated. |
| CVE-2021-22985 | On BIG-IP APM version 16.0.x before 16.0.1.1, under certain conditions, when processing VPN traffic with APM, TMM consumes excessive memory. A malicious, authenticated VPN user may abuse this to perform a DoS attack against the APM. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated. |
| CVE-2021-22955 | A unauthenticated denial of service vulnerability exists in Citrix ADC <13.0-83.27, <12.1-63.22 and 11.1-65.23 when configured as a VPN (Gateway) or AAA virtual server could allow an attacker to cause a temporary disruption of the Management GUI, Nitro API, and RPC communication. |
| CVE-2021-22128 | An improper access control vulnerability in FortiProxy SSL VPN portal 2.0.0, 1.2.9 and below versions may allow an authenticated, remote attacker to access internal service such as the ZebOS Shell on the FortiProxy appliance through the Quick Connection functionality. |
| CVE-2021-20145 | Gryphon Tower routers contain an unprotected openvpn configuration file which can grant attackers access to the Gryphon homebound VPN network which exposes the LAN interfaces of other users' devices connected to the same service. An attacker could leverage this to make configuration changes to, or otherwise attack victims' devices as though they were on an adjacent network. |
| CVE-2021-20051 | SonicWall Global VPN Client 4.10.7.1117 installer (32-bit and 64-bit) and earlier versions have a DLL Search Order Hijacking vulnerability in one of the installer components. Successful exploitation via a local attacker could result in command execution in the target system. |
| CVE-2021-20047 | SonicWall Global VPN client version 4.10.6 (32-bit and 64-bit) and earlier have a DLL Search Order Hijacking vulnerability. Successful exploitation via a local attacker could result in remote code execution in the target system. |
| CVE-2021-20037 | SonicWall Global VPN Client 4.10.5 installer (32-bit and 64-bit) incorrect default file permission vulnerability leads to privilege escalation which potentially allows command execution in the host operating system. This vulnerability impacts GVC 4.10.5 installer and earlier. |
| CVE-2021-1610 | Multiple vulnerabilities in the web-based management interface of the Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an attacker to do the following: Execute arbitrary code Cause a denial of service (DoS) condition Execute arbitrary commands For more information about these vulnerabilities, see the Details section of this advisory. |
| CVE-2021-1609 | Multiple vulnerabilities in the web-based management interface of the Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an attacker to do the following: Execute arbitrary code Cause a denial of service (DoS) condition Execute arbitrary commands For more information about these vulnerabilities, see the Details section of this advisory. |
| CVE-2021-1602 | A vulnerability in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient user input validation. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device using root-level privileges. Due to the nature of the vulnerability, only commands without parameters can be executed. |
| CVE-2021-1587 | A vulnerability in the VXLAN Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software, known as NGOAM, could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific packets with a Transparent Interconnection of Lots of Links (TRILL) OAM EtherType. An attacker could exploit this vulnerability by sending crafted packets, including the TRILL OAM EtherType of 0x8902, to a device that is part of a VXLAN Ethernet VPN (EVPN) fabric. A successful exploit could allow the attacker to cause an affected device to experience high CPU usage and consume excessive system resources, which may result in overall control plane instability and cause the affected device to reload. Note: The NGOAM feature is disabled by default. |
| CVE-2021-1568 | A vulnerability in Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to uncontrolled memory allocation. An attacker could exploit this vulnerability by copying a crafted file to a specific folder on the system. A successful exploit could allow the attacker to crash the VPN Agent service when the affected application is launched, causing it to be unavailable to all users of the system. To exploit this vulnerability, the attacker must have valid credentials on a multiuser Windows system. |
| CVE-2021-1567 | A vulnerability in the DLL loading mechanism of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack on an affected device if the VPN Posture (HostScan) Module is installed on the AnyConnect client. This vulnerability is due to a race condition in the signature verification process for DLL files that are loaded on an affected device. An attacker could exploit this vulnerability by sending a series of crafted interprocess communication (IPC) messages to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected device with SYSTEM privileges. To exploit this vulnerability, the attacker must have valid credentials on the Windows system. |
| CVE-2021-1520 | A vulnerability in the internal message processing of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, local attacker to run arbitrary commands with root privileges on the underlying operating system (OS). This vulnerability exists because an internal messaging service does not properly sanitize input. An attacker could exploit this vulnerability by first authenticating to the device and then sending a crafted request to the internal service. A successful exploit could allow the attacker to run arbitrary commands with root privileges on the underlying OS. To exploit this vulnerability, the attacker must have valid Administrator credentials for the device. |
| CVE-2021-1519 | A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client Software could allow an authenticated, local attacker to overwrite VPN profiles on an affected device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to modify VPN profile files. To exploit this vulnerability, the attacker must have valid credentials on the affected system. |
| CVE-2021-1504 | Multiple vulnerabilities in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to lack of proper input validation of the HTTPS request. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects only specific AnyConnect and WebVPN configurations. For more information, see the Vulnerable Products section. |
| CVE-2021-1445 | Multiple vulnerabilities in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to lack of proper input validation of the HTTPS request. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects only specific AnyConnect and WebVPN configurations. For more information, see the Vulnerable Products section. |
| CVE-2021-1415 | Multiple vulnerabilities in the web-based management interface of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code with elevated privileges equivalent to the web service process on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device. |
| CVE-2021-1414 | Multiple vulnerabilities in the web-based management interface of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code with elevated privileges equivalent to the web service process on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device. |
| CVE-2021-1413 | Multiple vulnerabilities in the web-based management interface of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code with elevated privileges equivalent to the web service process on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device. |
| CVE-2021-1366 | A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack on an affected device if the VPN Posture (HostScan) Module is installed on the AnyConnect client. This vulnerability is due to insufficient validation of resources that are loaded by the application at run time. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected machine with SYSTEM privileges. To exploit this vulnerability, the attacker needs valid credentials on the Windows system. |
| CVE-2021-1297 | Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to conduct directory traversal attacks and overwrite certain files that should be restricted on an affected system. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by using the web-based management interface to upload a file to location on an affected device that they should not have access to. A successful exploit could allow the attacker to overwrite files on the file system of the affected device. |
| CVE-2021-1296 | Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to conduct directory traversal attacks and overwrite certain files that should be restricted on an affected system. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by using the web-based management interface to upload a file to location on an affected device that they should not have access to. A successful exploit could allow the attacker to overwrite files on the file system of the affected device. |
| CVE-2021-1295 | Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device. |
| CVE-2021-1294 | Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device. |
| CVE-2021-1293 | Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device. |
| CVE-2021-1292 | Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device. |
| CVE-2021-1291 | Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device. |
| CVE-2021-1290 | Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device. |
| CVE-2021-1289 | Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device. |
| CVE-2021-1287 | A vulnerability in the web-based management interface of Cisco RV132W ADSL2+ Wireless-N VPN Routers and Cisco RV134W VDSL2 Wireless-AC VPN Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition on the affected device. |
| CVE-2021-0649 | In stopVpnProfile of Vpn.java, there is a possible VPN profile reset due to a permissions bypass. This could lead to local escalation of privilege CONTROL_ALWAYS_ON_VPN with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-191382886 |
| CVE-2021-0517 | In updateCapabilities of ConnectivityService.java, there is a possible incorrect network state determination due to a logic error in the code. This could lead to biasing of networking tasks to occur on non-VPN networks, which could lead to remote information disclosure, with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-179053823 |
| CVE-2021-0505 | In the Settings app, there is a possible way to disable an always-on VPN due to a missing permission check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-179975048 |
| CVE-2021-0261 | A vulnerability in the HTTP/HTTPS service used by J-Web, Web Authentication, Dynamic-VPN (DVPN), Firewall Authentication Pass-Through with Web-Redirect, and Captive Portal allows an unauthenticated attacker to cause an extended Denial of Service (DoS) for these services by sending a high number of specific requests. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S17 on EX Series; 12.3X48 versions prior to 12.3X48-D105 on SRX Series; 15.1 versions prior to 15.1R7-S8; 15.1X49 versions prior to 15.1X49-D230 on SRX Series; 16.1 versions prior to 16.1R7-S8; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2; 20.2 versions prior to 20.2R1-S1, 20.2R2. |
| CVE-2021-0228 | An improper check for unusual or exceptional conditions vulnerability in Juniper Networks MX Series platforms with Trio-based MPC (Modular Port Concentrator) deployed in (Ethernet VPN) EVPN-(Virtual Extensible LAN) VXLAN configuration, may allow an attacker sending specific Layer 2 traffic to cause Distributed Denial of Service (DDoS) protection to trigger unexpectedly, resulting in traffic impact. Continued receipt and processing of this specific Layer 2 frames will sustain the Denial of Service (DoS) condition. An indication of compromise is to check DDOS LACP violations: user@device> show ddos-protection protocols statistics brief | match lacp This issue only affects the MX Series platforms with Trio-based MPC. No other products or platforms are affected. This issue affects: Juniper Networks Junos OS on MX Series: 15.1 versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2-S1, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2; |
| CVE-2020-8245 | Improper Input Validation on Citrix ADC and Citrix Gateway 13.0 before 13.0-64.35, Citrix ADC and NetScaler Gateway 12.1 before 12.1-58.15, Citrix ADC 12.1-FIPS before 12.1-55.187, Citrix ADC and NetScaler Gateway 12.0, Citrix ADC and NetScaler Gateway 11.1 before 11.1-65.12, Citrix SD-WAN WANOP 11.2 before 11.2.1a, Citrix SD-WAN WANOP 11.1 before 11.1.2a, Citrix SD-WAN WANOP 11.0 before 11.0.3f, Citrix SD-WAN WANOP 10.2 before 10.2.7b leads to an HTML Injection attack against the SSL VPN web portal. |
| CVE-2020-6760 | Schmid ZI 620 V400 VPN 090 routers allow an attacker to execute OS commands as root via shell metacharacters to an entry on the SSH subcommand menu, as demonstrated by ping. |
| CVE-2020-5893 | In versions 7.1.5-7.1.8, when a user connects to a VPN using BIG-IP Edge Client over an unsecure network, BIG-IP Edge Client responds to authentication requests over HTTP while sending probes for captive portal detection. |
| CVE-2020-5739 | Grandstream GXP1600 series firmware 1.0.4.152 and below is vulnerable to authenticated remote command execution when an attacker adds an OpenVPN up script to the phone's VPN settings via the "Additional Settings" field in the web interface. When the VPN's connection is established, the user defined script is executed with root privileges. |
| CVE-2020-5548 | Yamaha LTE VoIP Router(NVR700W firmware Rev.15.00.15 and earlier), Yamaha Gigabit VoIP Router(NVR510 firmware Rev.15.01.14 and earlier), Yamaha Gigabit VPN Router(RTX810 firmware Rev.11.01.33 and earlier, RTX830 firmware Rev.15.02.09 and earlier, RTX1200 firmware Rev.10.01.76 and earlier, RTX1210 firmware Rev.14.01.33 and earlier, RTX3500 firmware Rev.14.00.26 and earlier, and RTX5000 firmware Rev.14.00.26 and earlier), Yamaha Broadband VoIP Router(NVR500 firmware Rev.11.00.38 and earlier), and Yamaha Firewall(FWX120 firmware Rev.11.03.27 and earlier) allow remote attackers to cause a denial of service via unspecified vectors. |
| CVE-2020-5180 | Viscosity 1.8.2 on Windows and macOS allows an unprivileged user to set a subset of OpenVPN parameters, which can be used to load a malicious library into the memory of the OpenVPN process, leading to limited local privilege escalation. (When a VPN connection is initiated using a TLS/SSL client profile, the privileges are dropped, and the library will be loaded, resulting in arbitrary code execution as a user with limited privileges. This greatly reduces the impact of the vulnerability.) |
| CVE-2020-5145 | SonicWall Global VPN client version 4.10.4.0314 and earlier have an insecure library loading (DLL hijacking) vulnerability. Successful exploitation could lead to remote code execution in the target system. |
| CVE-2020-5144 | SonicWall Global VPN client version 4.10.4.0314 and earlier allows unprivileged windows user to elevate privileges to SYSTEM through loaded process hijacking vulnerability. |
| CVE-2020-5136 | A buffer overflow vulnerability in SonicOS allows an authenticated attacker to cause Denial of Service (DoS) in the SSL-VPN and virtual assist portal, which leads to a firewall crash. This vulnerability affected SonicOS Gen 5 version 5.9.1.7, 5.9.1.13, Gen 6 version 6.5.4.7, 6.5.1.12, 6.0.5.3, SonicOSv 6.5.4.v and Gen 7 version 7.0.0.0. |
| CVE-2020-5132 | SonicWall SSL-VPN products and SonicWall firewall SSL-VPN feature misconfiguration leads to possible DNS flaw known as domain name collision vulnerability. When the users publicly display their organization’s internal domain names in the SSL-VPN authentication page, an attacker with knowledge of internal domain names can potentially take advantage of this vulnerability. |
| CVE-2020-3561 | A vulnerability in the Clientless SSL VPN (WebVPN) of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to inject arbitrary HTTP headers in the responses of the affected system. The vulnerability is due to improper input sanitization. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to conduct a CRLF injection attack, adding arbitrary HTTP headers in the responses of the system and redirecting the user to arbitrary websites. |
| CVE-2020-3529 | A vulnerability in the SSL VPN negotiation process for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to inefficient direct memory access (DMA) memory management during the negotiation phase of an SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted Datagram TLS (DTLS) traffic to an affected device. A successful exploit could allow the attacker to exhaust DMA memory on the device and cause a DoS condition. |
| CVE-2020-3479 | A vulnerability in the implementation of Multiprotocol Border Gateway Protocol (MP-BGP) for the Layer 2 VPN (L2VPN) Ethernet VPN (EVPN) address family in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of Border Gateway Protocol (BGP) update messages that contain crafted EVPN attributes. An attacker could exploit this vulnerability by sending BGP update messages with specific, malformed attributes to an affected device. A successful exploit could allow the attacker to cause an affected device to crash, resulting in a DoS condition. |
| CVE-2020-3435 | A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to overwrite VPN profiles on an affected device. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process on an affected device. A successful exploit could allow the attacker to modify VPN profile files. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system. |
| CVE-2020-3398 | A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a BGP session to repeatedly reset, causing a partial denial of service (DoS) condition due to the BGP session being down. The vulnerability is due to incorrect parsing of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause the BGP peer connections to reset, which could lead to BGP route instability and impact traffic. The incoming BGP MVPN update message is valid but is parsed incorrectly by the NX-OS device, which could send a corrupted BGP update to the configured BGP peer. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system. |
| CVE-2020-3397 | A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this specific, valid BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause one of the BGP-related routing applications to restart multiple times, leading to a system-level restart. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system. |
| CVE-2020-3358 | A vulnerability in the Secure Sockets Layer (SSL) VPN feature for Cisco Small Business RV VPN Routers could allow an unauthenticated, remote attacker to cause the device to unexpectedly restart, causing a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request over an SSL connection to the targeted device. A successful exploit could allow the attacker to cause a reload, resulting in a DoS condition. |
| CVE-2020-3357 | A vulnerability in the Secure Sockets Layer (SSL) VPN feature of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device or cause the device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because HTTP requests are not properly validated. An attacker could exploit this vulnerability by sending a crafted HTTP request over an SSL connection to an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device or cause the device to reload, resulting in a DoS condition. |
| CVE-2020-3331 | A vulnerability in the web-based management interface of Cisco RV110W Wireless-N VPN Firewall and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input data by the web-based management interface. An attacker could exploit this vulnerability by sending crafted requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user. |
| CVE-2020-3330 | A vulnerability in the Telnet service of Cisco Small Business RV110W Wireless-N VPN Firewall Routers could allow an unauthenticated, remote attacker to take full control of the device with a high-privileged account. The vulnerability exists because a system account has a default and static password. An attacker could exploit this vulnerability by using this default account to connect to the affected system. A successful exploit could allow the attacker to gain full control of an affected device. |
| CVE-2020-3310 | A vulnerability in the XML parser code of Cisco Firepower Device Manager On-Box software could allow an authenticated, remote attacker to cause an affected system to become unstable or reload. The vulnerability is due to insufficient hardening of the XML parser configuration. An attacker could exploit this vulnerability in multiple ways using a malicious file: An attacker with administrative privileges could upload a malicious XML file on the system and cause the XML code to parse the malicious file. An attacker with Clientless Secure Sockets Layer (SSL) VPN access could exploit this vulnerability by sending a crafted XML file. A successful exploit would allow the attacker to crash the XML parser process, which could cause system instability, memory exhaustion, and in some cases lead to a reload of the affected system. |
| CVE-2020-3220 | A vulnerability in the hardware crypto driver of Cisco IOS XE Software for Cisco 4300 Series Integrated Services Routers and Cisco Catalyst 9800-L Wireless Controllers could allow an unauthenticated, remote attacker to disconnect legitimate IPsec VPN sessions to an affected device. The vulnerability is due to insufficient verification of authenticity of received Encapsulating Security Payload (ESP) packets. An attacker could exploit this vulnerability by tampering with ESP cleartext values as a man-in-the-middle. |
| CVE-2020-3189 | A vulnerability in the VPN System Logging functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak that can deplete system memory over time, which can cause unexpected system behaviors or device crashes. The vulnerability is due to the system memory not being properly freed for a VPN System Logging event generated when a VPN session is created or deleted. An attacker could exploit this vulnerability by repeatedly creating or deleting a VPN tunnel connection, which could leak a small amount of system memory for each logging event. A successful exploit could allow the attacker to cause system memory depletion, which can lead to a systemwide denial of service (DoS) condition. The attacker does not have any control of whether VPN System Logging is configured or not on the device, but it is enabled by default. |
| CVE-2020-3146 | Multiple vulnerabilities in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary code on an affected device. The vulnerabilities are due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit these vulnerabilities by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user. |
| CVE-2020-3145 | Multiple vulnerabilities in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary code on an affected device. The vulnerabilities are due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit these vulnerabilities by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user. |
| CVE-2020-3144 | A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary commands with administrative commands on an affected device. The vulnerability is due to improper session management on affected devices. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device. |
| CVE-2020-3125 | A vulnerability in the Kerberos authentication feature of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to impersonate the Kerberos key distribution center (KDC) and bypass authentication on an affected device that is configured to perform Kerberos authentication for VPN or local device access. The vulnerability is due to insufficient identity verification of the KDC when a successful authentication response is received. An attacker could exploit this vulnerability by spoofing the KDC server response to the ASA device. This malicious response would not have been authenticated by the KDC. A successful attack could allow an attacker to bypass Kerberos authentication. |
| CVE-2020-29299 | Certain Zyxel products allow command injection by an admin via an input string to chg_exp_pwd during a password-change action. This affects VPN On-premise before ZLD V4.39 week38, VPN Orchestrator before SD-OS V10.03 week32, USG before ZLD V4.39 week38, USG FLEX before ZLD V4.55 week38, ATP before ZLD V4.55 week38, and NSG before 1.33 patch 4. |
| CVE-2020-27724 | In BIG-IP APM versions 16.0.0-16.0.0.1, 15.1.0-15.1.0.4, 15.0.0-15.0.1.3, 14.1.0-14.1.3, 13.1.0-13.1.3.4, 12.1.0-12.1.5.2, and 11.6.1-11.6.5.2, on systems running more than one TMM instance, authenticated VPN users may consume excessive resources by sending specially-crafted malicious traffic over the tunnel. |
| CVE-2020-27569 | Arbitrary File Write exists in Aviatrix VPN Client 2.8.2 and earlier. The VPN service writes logs to a location that is world writable and can be leveraged to gain write access to any file on the system. |
| CVE-2020-27518 | All versions of Windscribe VPN for Mac and Windows <= v2.02.10 contain a local privilege escalation vulnerability in the WindscribeService component. A low privilege user could leverage several openvpn options to execute code as root/SYSTEM. |
| CVE-2020-26230 | Radar COVID is the official COVID-19 exposure notification app for Spain. In affected versions of Radar COVID, identification and de-anonymization of COVID-19 positive users that upload Radar COVID TEKs to the Radar COVID server is possible. This vulnerability enables the identification and de-anonymization of COVID-19 positive users when using Radar COVID. The vulnerability is caused by the fact that Radar COVID connections to the server (uploading of TEKs to the backend) are only made by COVID-19 positives. Therefore, any on-path observer with the ability to monitor traffic between the app and the server can identify which users had a positive test. Such an adversary can be the mobile network operator (MNO) if the connection is done through a mobile network, the Internet Service Provider (ISP) if the connection is done through the Internet (e.g., a home network), a VPN provider used by the user, the local network operator in the case of enterprise networks, or any eavesdropper with access to the same network (WiFi or Ethernet) as the user as could be the case of public WiFi hotspots deployed at shopping centers, airports, hotels, and coffee shops. The attacker may also de-anonymize the user. For this additional stage to succeed, the adversary needs to correlate Radar COVID traffic to other identifiable information from the victim. This could be achieved by associating the connection to a contract with the name of the victim or by associating Radar COVID traffic to other user-generated flows containing identifiers in the clear (e.g., HTTP cookies or other mobile flows sending unique identifiers like the IMEI or the AAID without encryption). The former can be executed, for instance, by the Internet Service Provider or the MNO. The latter can be executed by any on-path adversary, such as the network provider or even the cloud provider that hosts more than one service accessed by the victim. The farther the adversary is either from the victim (the client) or the end-point (the server), the less likely it may be that the adversary has access to re-identification information. The vulnerability has been mitigated with the injection of dummy traffic from the application to the backend. Dummy traffic is generated by all users independently of whether they are COVID-19 positive or not. The issue was fixed in iOS in version 1.0.8 (uniform distribution), 1.1.0 (exponential distribution), Android in version 1.0.7 (uniform distribution), 1.1.0 (exponential distribution), Backend in version 1.1.2-RELEASE. For more information see the referenced GitHub Security Advisory. |
| CVE-2020-25757 | A lack of input validation and access controls in Lua CGIs on D-Link DSR VPN routers may result in arbitrary input being passed to system command APIs, resulting in arbitrary command execution with root privileges. This affects DSR-150, DSR-250, DSR-500, and DSR-1000AC with firmware 3.14 and 3.17. |
| CVE-2020-25289 | The VPN service in AVAST SecureLine before 5.6.4982.470 allows local users to write to arbitrary files via an Object Manager symbolic link from the log directory (which has weak permissions). |
| CVE-2020-25200 | ** DISPUTED ** Pritunl 1.29.2145.25 allows attackers to enumerate valid VPN usernames via a series of /auth/session login attempts. Initially, the server will return error 401. However, if the username is valid, then after 20 login attempts, the server will start responding with error 400. Invalid usernames will receive error 401 indefinitely. Note: This has been disputed by the vendor as not a vulnerability. They argue that this is an intended design. |
| CVE-2020-25043 | The installer of Kaspersky VPN Secure Connection prior to 5.0 was vulnerable to arbitrary file deletion that could allow an attacker to delete any file in the system. |
| CVE-2020-25014 | A stack-based buffer overflow in fbwifi_continue.cgi on Zyxel UTM and VPN series of gateways running firmware version V4.30 through to V4.55 allows remote unauthenticated attackers to execute arbitrary code via a crafted http packet. |
| CVE-2020-2050 | An authentication bypass vulnerability exists in the GlobalProtect SSL VPN component of Palo Alto Networks PAN-OS software that allows an attacker to bypass all client certificate checks with an invalid certificate. A remote attacker can successfully authenticate as any user and gain access to restricted VPN network resources when the gateway or portal is configured to rely entirely on certificate-based authentication. Impacted features that use SSL VPN with client certificate verification are: GlobalProtect Gateway, GlobalProtect Portal, GlobalProtect Clientless VPN In configurations where client certificate verification is used in conjunction with other authentication methods, the protections added by the certificate check are ignored as a result of this issue. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.17; PAN-OS 9.0 versions earlier than PAN-OS 9.0.11; PAN-OS 9.1 versions earlier than PAN-OS 9.1.5; PAN-OS 10.0 versions earlier than PAN-OS 10.0.1. |
| CVE-2020-2021 | When Security Assertion Markup Language (SAML) authentication is enabled and the 'Validate Identity Provider Certificate' option is disabled (unchecked), improper verification of signatures in PAN-OS SAML authentication enables an unauthenticated network-based attacker to access protected resources. The attacker must have network access to the vulnerable server to exploit this vulnerability. This issue affects PAN-OS 9.1 versions earlier than PAN-OS 9.1.3; PAN-OS 9.0 versions earlier than PAN-OS 9.0.9; PAN-OS 8.1 versions earlier than PAN-OS 8.1.15, and all versions of PAN-OS 8.0 (EOL). This issue does not affect PAN-OS 7.1. This issue cannot be exploited if SAML is not used for authentication. This issue cannot be exploited if the 'Validate Identity Provider Certificate' option is enabled (checked) in the SAML Identity Provider Server Profile. Resources that can be protected by SAML-based single sign-on (SSO) authentication are: GlobalProtect Gateway, GlobalProtect Portal, GlobalProtect Clientless VPN, Authentication and Captive Portal, PAN-OS next-generation firewalls (PA-Series, VM-Series) and Panorama web interfaces, Prisma Access In the case of GlobalProtect Gateways, GlobalProtect Portal, Clientless VPN, Captive Portal, and Prisma Access, an unauthenticated attacker with network access to the affected servers can gain access to protected resources if allowed by configured authentication and Security policies. There is no impact on the integrity and availability of the gateway, portal or VPN server. An attacker cannot inspect or tamper with sessions of regular users. In the worst case, this is a critical severity vulnerability with a CVSS Base Score of 10.0 (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:N). In the case of PAN-OS and Panorama web interfaces, this issue allows an unauthenticated attacker with network access to the PAN-OS or Panorama web interfaces to log in as an administrator and perform administrative actions. In the worst-case scenario, this is a critical severity vulnerability with a CVSS Base Score of 10.0 (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H). If the web interfaces are only accessible to a restricted management network, then the issue is lowered to a CVSS Base Score of 9.6 (CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H). Palo Alto Networks is not aware of any malicious attempts to exploit this vulnerability. |
| CVE-2020-2005 | A cross-site scripting (XSS) vulnerability exists when visiting malicious websites with the Palo Alto Networks GlobalProtect Clientless VPN that can compromise the user's active session. This issue affects: PAN-OS 7.1 versions earlier than 7.1.26; PAN-OS 8.1 versions earlier than 8.1.13; PAN-OS 9.0 versions earlier than 9.0.7; All versions of PAN-OS 8.0. |
| CVE-2020-1987 | An information exposure vulnerability in the logging component of Palo Alto Networks Global Protect Agent allows a local authenticated user to read VPN cookie information when the troubleshooting logging level is set to "Dump". This issue affects Palo Alto Networks Global Protect Agent 5.0 versions prior to 5.0.9; 5.1 versions prior to 5.1.1. |
| CVE-2020-17365 | Improper directory permissions in the Hotspot Shield VPN client software for Windows 10.3.0 and earlier may allow an authorized user to potentially enable escalation of privilege via local access. The vulnerability allows a local user to corrupt system files: a local user can create a specially crafted symbolic link to a critical file on the system and overwrite it with privileges of the application. |
| CVE-2020-1687 | On Juniper Networks EX4300-MP Series, EX4600 Series and QFX5K Series deployed in (Ethernet VPN) EVPN-(Virtual Extensible LAN) VXLAN configuration, receipt of a stream of specific VXLAN encapsulated layer 2 frames can cause high CPU load, which could lead to network protocol operation issue and traffic interruption. This issue affects devices that are configured as a Layer 2 or Layer 3 gateway of an EVPN-VXLAN deployment. The offending layer 2 frames that cause the issue originate from a different access switch that get encapsulated within the same EVPN-VXLAN domain. This issue affects Juniper Networks Junos OS on EX4300-MP Series, EX4600 Series and QFX5K Series: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R2-S1, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2. |
| CVE-2020-1673 | Insufficient Cross-Site Scripting (XSS) protection in Juniper Networks J-Web and web based (HTTP/HTTPS) services allows an unauthenticated attacker to hijack the target user's HTTP/HTTPS session and perform administrative actions on the Junos device as the targeted user. This issue only affects Juniper Networks Junos OS devices with HTTP/HTTPS services enabled such as J-Web, Web Authentication, Dynamic-VPN (DVPN), Firewall Authentication Pass-Through with Web-Redirect, and Zero Touch Provisioning (ZTP). Junos OS devices with HTTP/HTTPS services disabled are not affected. If HTTP/HTTPS services are enabled, the following command will show the httpd processes: user@device> show system processes | match http 5260 - S 0:00.13 /usr/sbin/httpd-gk -N 5797 - I 0:00.10 /usr/sbin/httpd --config /jail/var/etc/httpd.conf In order to successfully exploit this vulnerability, the attacker needs to convince the device administrator to take action such as clicking the crafted URL sent via phishing email or convince the administrator to input data in the browser console. This issue affects Juniper Networks Junos OS: 18.1 versions prior to 18.1R3-S1; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S5, 18.4R3-S2; 19.1 versions prior to 19.1R2-S2, 19.1R3-S1; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2; 20.1 versions prior to 20.1R1-S2, 20.1R2. This issue does not affect Juniper Networks Junos OS prior to 18.1R1. |
| CVE-2020-1631 | A vulnerability in the HTTP/HTTPS service used by J-Web, Web Authentication, Dynamic-VPN (DVPN), Firewall Authentication Pass-Through with Web-Redirect, and Zero Touch Provisioning (ZTP) allows an unauthenticated attacker to perform local file inclusion (LFI) or path traversal. Using this vulnerability, an attacker may be able to inject commands into the httpd.log, read files with 'world' readable permission file or obtain J-Web session tokens. In the case of command injection, as the HTTP service runs as user 'nobody', the impact of this command injection is limited. (CVSS score 5.3, vector CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N) In the case of reading files with 'world' readable permission, in Junos OS 19.3R1 and above, the unauthenticated attacker would be able to read the configuration file. (CVSS score 5.9, vector CVSS:3.1/ AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N) If J-Web is enabled, the attacker could gain the same level of access of anyone actively logged into J-Web. If an administrator is logged in, the attacker could gain administrator access to J-Web. (CVSS score 8.8, vector CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H) This issue only affects Juniper Networks Junos OS devices with HTTP/HTTPS services enabled. Junos OS devices with HTTP/HTTPS services disabled are not affected. If HTTP/HTTPS services are enabled, the following command will show the httpd processes: user@device> show system processes | match http 5260 - S 0:00.13 /usr/sbin/httpd-gk -N 5797 - I 0:00.10 /usr/sbin/httpd --config /jail/var/etc/httpd.conf To summarize: If HTTP/HTTPS services are disabled, there is no impact from this vulnerability. If HTTP/HTTPS services are enabled and J-Web is not in use, this vulnerability has a CVSS score of 5.9 (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). If J-Web is enabled, this vulnerability has a CVSS score of 8.8 (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H). Juniper SIRT has received a single report of this vulnerability being exploited in the wild. Out of an abundance of caution, we are notifying customers so they can take appropriate actions. Indicators of Compromise: The /var/log/httpd.log may have indicators that commands have injected or files being accessed. The device administrator can look for these indicators by searching for the string patterns "=*;*&" or "*%3b*&" in /var/log/httpd.log, using the following command: user@device> show log httpd.log | match "=*;*&|=*%3b*&" If this command returns any output, it might be an indication of malicious attempts or simply scanning activities. Rotated logs should also be reviewed, using the following command: user@device> show log httpd.log.0.gz | match "=*;*&|=*%3b*&" user@device> show log httpd.log.1.gz | match "=*;*&|=*%3b*&" Note that a skilled attacker would likely remove these entries from the local log file, thus effectively eliminating any reliable signature that the device had been attacked. This issue affects Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S16; 12.3X48 versions prior to 12.3X48-D101, 12.3X48-D105; 14.1X53 versions prior to 14.1X53-D54; 15.1 versions prior to 15.1R7-S7; 15.1X49 versions prior to 15.1X49-D211, 15.1X49-D220; 16.1 versions prior to 16.1R7-S8; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S4; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R3-S2 ; 18.4 version 18.4R2 and later versions; 19.1 versions prior to 19.1R1-S5, 19.1R3-S1; 19.1 version 19.1R2 and later versions; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2; 20.1 versions prior to 20.1R1-S1, 20.1R2. |
| CVE-2020-15679 | An OAuth session fixation vulnerability existed in the VPN login flow, where an attacker could craft a custom login URL, convince a VPN user to login via that URL, and obtain authenticated access as that user. This issue is limited to cases where attacker and victim are sharing the same source IP and could allow the ability to view session states and disconnect VPN sessions. This vulnerability affects Mozilla VPN iOS 1.0.7 < (929), Mozilla VPN Windows < 1.2.2, and Mozilla VPN Android 1.1.0 < (1360). |
| CVE-2020-15590 | A vulnerability in the Private Internet Access (PIA) VPN Client for Linux 1.5 through 2.3+ allows remote attackers to bypass an intended VPN kill switch mechanism and read sensitive information via intercepting network traffic. Since 1.5, PIA has supported a “split tunnel” OpenVPN bypass option. The PIA killswitch & associated iptables firewall is designed to protect you while using the Internet. When the kill switch is configured to block all inbound and outbound network traffic, privileged applications can continue sending & receiving network traffic if net.ipv4.ip_forward has been enabled in the system kernel parameters. For example, a Docker container running on a host with the VPN turned off, and the kill switch turned on, can continue using the internet, leaking the host IP (CWE 200). In PIA 2.4.0+, policy-based routing is enabled by default and is used to direct all forwarded packets to the VPN interface automatically. |
| CVE-2020-15467 | The administrative interface of Cohesive Networks vns3:vpn appliances before version 4.11.1 is vulnerable to authenticated remote code execution leading to server compromise. |
| CVE-2020-13417 | An Elevation of Privilege issue was discovered in Aviatrix VPN Client before 2.10.7, because of an incomplete fix for CVE-2020-7224. This affects Linux, macOS, and Windows installations for certain OpenSSL parameters. |
| CVE-2020-12828 | An issue was discovered in AnchorFree VPN SDK before 1.3.3.218. The VPN SDK service takes certain executable locations over a socket bound to localhost. Binding to the socket and providing a path where a malicious executable file resides leads to executing the malicious executable file with SYSTEM privileges. |
| CVE-2020-12812 | An improper authentication vulnerability in SSL VPN in FortiOS 6.4.0, 6.2.0 to 6.2.3, 6.0.9 and below may result in a user being able to log in successfully without being prompted for the second factor of authentication (FortiToken) if they changed the case of their username. |
| CVE-2020-11711 | An issue was discovered in Stormshield SNS 3.8.0. Authenticated Stored XSS in the admin login panel leads to SSL VPN credential theft. A malicious disclaimer file can be uploaded from the admin panel. The resulting file is rendered on the authentication interface of the admin panel. It is possible to inject malicious HTML content in order to execute JavaScript inside a victim's browser. This results in a stored XSS on the authentication interface of the admin panel. Moreover, an unsecured authentication form is present on the authentication interface of the SSL VPN captive portal. Users are allowed to save their credentials inside the browser. If an administrator saves his credentials through this unsecured form, these credentials could be stolen via the stored XSS on the admin panel without user interaction. Another possible exploitation would be modification of the authentication form of the admin panel into a malicious form. |
| CVE-2020-0467 | In onUserStopped of Vpn.java, there is a possible resetting of user preferences due to a logic issue. This could lead to local information disclosure of secure network traffic over a non-VPN link with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-8.1 Android-9Android ID: A-168500792 |
| CVE-2019-9955 | On Zyxel ATP200, ATP500, ATP800, USG20-VPN, USG20W-VPN, USG40, USG40W, USG60, USG60W, USG110, USG210, USG310, USG1100, USG1900, USG2200-VPN, ZyWALL 110, ZyWALL 310, ZyWALL 1100 devices, the security firewall login page is vulnerable to Reflected XSS via the unsanitized 'mp_idx' parameter. |
| CVE-2019-9657 | Alarm.com ADC-V522IR 0100b9 devices have Incorrect Access Control, a different issue than CVE-2018-19588. This occurs because of incorrect protection of VPN certificates (used for initiating a VPN session to the Alarm.com infrastructure) on the local camera device. |
| CVE-2019-9584 | eQ-3 Homematic AddOn 'CloudMatic' on CCU2 and CCU3 allows uncontrolled admin access, resulting in the ability to obtain VPN profile details, shutting down the VPN service and to delete the VPN service configuration. This is related to improper access control for all /addons/mh/ pages. |
| CVE-2019-9461 | In the Android kernel in VPN routing there is a possible information disclosure. This could lead to remote information disclosure by an adjacent network attacker with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2019-8459 | Check Point Endpoint Security Client for Windows, with the VPN blade, before version E80.83, starts a process without using quotes in the path. This can cause loading of a previously placed executable with a name similar to the parts of the path, instead of the intended one. |
| CVE-2019-8456 | Check Point IKEv2 IPsec VPN up to R80.30, in some less common conditions, may allow an attacker with knowledge of the internal configuration and setup to successfully connect to a site-to-site VPN server. |
| CVE-2019-6724 | The barracudavpn component of the Barracuda VPN Client prior to version 5.0.2.7 for Linux, macOS, and OpenBSD runs as a privileged process and can allow an unprivileged local attacker to load a malicious library, resulting in arbitrary code executing as root. |
| CVE-2019-6611 | When BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8 are processing certain rare data sequences occurring in PPTP VPN traffic, the BIG-IP system may execute incorrect logic. The TMM may restart and produce a core file as a result of this condition. The BIG-IP system provisioned with the CGNAT module and configured with a virtual server using a PPTP profile is exposed to this vulnerability. |
| CVE-2019-6145 | Forcepoint VPN Client for Windows versions lower than 6.6.1 have an unquoted search path vulnerability. This enables local privilege escalation to SYSTEM user. By default, only local administrators can write executables to the vulnerable directories. Forcepoint thanks Peleg Hadar of SafeBreach Labs for finding this vulnerability and for reporting it to us. |
| CVE-2019-6143 | Forcepoint Next Generation Firewall (Forcepoint NGFW) 6.4.x before 6.4.7, 6.5.x before 6.5.4, and 6.6.x before 6.6.2 has a serious authentication vulnerability that potentially allows unauthorized users to bypass password authentication and access services protected by the NGFW Engine. The vulnerability affects the following NGFW features when the LDAP authentication method is used as the backend authentication: IPsec VPN, SSL VPN or Browser-based user authentication. The vulnerability does not apply when any other backend authentication is used. The RADIUS authentication method is not vulnerable, for example. |
| CVE-2019-5588 | A reflected Cross-Site-Scripting (XSS) vulnerability in Fortinet FortiOS 6.0.0 to 6.0.4 under SSL VPN web portal may allow an attacker to execute unauthorized malicious script code via the "err" parameter of the error process HTTP requests. |
| CVE-2019-5586 | A reflected Cross-Site-Scripting (XSS) vulnerability in Fortinet FortiOS 5.2.0 to 5.6.10, 6.0.0 to 6.0.4 under SSL VPN web portal may allow an attacker to execute unauthorized malicious script code via the "param" parameter of the error process HTTP requests. |
| CVE-2019-2132 | It is possible to overlay the VPN dialog by a malicious application. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation. Product: Android. Versions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9. Android ID: A-130568701. |
| CVE-2019-18909 | The VPN software within HP ThinPro does not safely handle user supplied input, which may be leveraged by an attacker to inject commands that will execute with root privileges. |
| CVE-2019-1849 | A vulnerability in the Border Gateway Patrol (BGP) Multiprotocol Label Switching (MPLS)-based Ethernet VPN (EVPN) implementation of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to a logic error that occurs when the affected software processes specific EVPN routing information. An attacker could exploit this vulnerability by injecting malicious traffic patterns into the targeted EVPN network. A successful exploit could result in a crash of the l2vpn_mgr process on Provider Edge (PE) device members of the same EVPN instance (EVI). On each of the affected devices, a crash could lead to system instability and the inability to process or forward traffic through the device, resulting in a DoS condition that would require manual intervention to restore normal operating conditions. |
| CVE-2019-1843 | A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to reload the device and causing a DoS condition. |
| CVE-2019-1828 | A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an unauthenticated, remote attacker to access administrative credentials. The vulnerability exists because affected devices use weak encryption algorithms for user credentials. An attacker could exploit this vulnerability by conducting a man-in-the-middle attack and decrypting intercepted credentials. A successful exploit could allow the attacker to gain access to an affected device with administrator privileges. This vulnerability affects Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers running firmware releases prior to 1.4.2.22. |
| CVE-2019-1827 | A vulnerability in the Online Help web service of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the service. The vulnerability exists because the Online Help web service of an affected device insufficiently validates user-supplied input. An attacker could exploit this vulnerability by persuading a user of the service to click a malicious link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected service or access sensitive browser-based information.This vulnerability affects Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers running firmware releases prior to 1.4.2.22. |
| CVE-2019-18177 | In certain Citrix products, information disclosure can be achieved by an authenticated VPN user when there is a configured SSL VPN endpoint. This affects Citrix ADC and Citrix Gateway 13.0-58.30 and later releases before the CTX276688 update. |
| CVE-2019-17655 | A cleartext storage in a file or on disk (CWE-313) vulnerability in FortiOS SSL VPN 6.2.0 through 6.2.2, 6.0.9 and earlier and FortiProxy 2.0.0, 1.2.9 and earlier may allow an attacker to retrieve a logged-in SSL VPN user's credentials should that attacker be able to read the session file stored on the targeted device's system. |
| CVE-2019-17388 | Weak file permissions applied to the Aviatrix VPN Client through 2.2.10 installation directory on Windows and Linux allow a local attacker to execute arbitrary code by gaining elevated privileges through file modifications. |
| CVE-2019-17387 | An authentication flaw in the AVPNC_RP service in Aviatrix VPN Client through 2.2.10 allows an attacker to gain elevated privileges through arbitrary code execution on Windows, Linux, and macOS. |
| CVE-2019-1724 | A vulnerability in the session management functionality of the web-based interface for Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an unauthenticated, remote attacker to hijack a valid user session on an affected system. An attacker could use this impersonated session to create a new user account or otherwise control the device with the privileges of the hijacked session. The vulnerability is due to a lack of proper session management controls. An attacker could exploit this vulnerability by sending a crafted HTTP request to a targeted device. A successful exploit could allow the attacker to take control of an existing user session on the device. Exploitation of the vulnerability requires that an authorized user session is active and that the attacker can craft an HTTP request to impersonate that session. |
| CVE-2019-1714 | A vulnerability in the implementation of Security Assertion Markup Language (SAML) 2.0 Single Sign-On (SSO) for Clientless SSL VPN (WebVPN) and AnyConnect Remote Access VPN in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to successfully establish a VPN session to an affected device. The vulnerability is due to improper credential management when using NT LAN Manager (NTLM) or basic authentication. An attacker could exploit this vulnerability by opening a VPN session to an affected device after another VPN user has successfully authenticated to the affected device via SAML SSO. A successful exploit could allow the attacker to connect to secured networks behind the affected device. |
| CVE-2019-17059 | A shell injection vulnerability on the Sophos Cyberoam firewall appliance with CyberoamOS before 10.6.6 MR-6 allows remote attackers to execute arbitrary commands via the Web Admin and SSL VPN consoles. |
| CVE-2019-1705 | A vulnerability in the remote access VPN session manager of Cisco Adaptive Security Appliance (ASA) Software could allow a unauthenticated, remote attacker to cause a denial of service (DoS) condition on the remote access VPN services. The vulnerability is due to an issue with the remote access VPN session manager. An attacker could exploit this vulnerability by requesting an excessive number of remote access VPN sessions. An exploit could allow the attacker to cause a DoS condition. |
| CVE-2019-16651 | An issue was discovered on Virgin Media Super Hub 3 (based on ARRIS TG2492) devices. Because their SNMP commands have insufficient protection mechanisms, it is possible to use JavaScript and DNS rebinding to leak the WAN IP address of a user (if they are using certain VPN implementations, this would decloak them). |
| CVE-2019-1663 | A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user. RV110W Wireless-N VPN Firewall versions prior to 1.2.2.1 are affected. RV130W Wireless-N Multifunction VPN Router versions prior to 1.0.3.45 are affected. RV215W Wireless-N VPN Router versions prior to 1.3.1.1 are affected. |
| CVE-2019-1653 | A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an unauthenticated, remote attacker to retrieve sensitive information. The vulnerability is due to improper access controls for URLs. An attacker could exploit this vulnerability by connecting to an affected device via HTTP or HTTPS and requesting specific URLs. A successful exploit could allow the attacker to download the router configuration or detailed diagnostic information. Cisco has released firmware updates that address this vulnerability. |
| CVE-2019-1652 | A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker with administrative privileges on an affected device to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious HTTP POST requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux shell as root. Cisco has released firmware updates that address this vulnerability. |
| CVE-2019-16302 | An issue was discovered in Open Network Operating System (ONOS) 1.14. In the Ethernet VPN application (org.onosproject.evpnopenflow), the host event listener does not handle the following event types: HOST_MOVED, HOST_UPDATED. In combination with other applications, this could lead to the absence of intended code execution. |
| CVE-2019-16023 | Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. |
| CVE-2019-16022 | Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. |
| CVE-2019-16021 | Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. |
| CVE-2019-16020 | Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. |
| CVE-2019-16019 | Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. |
| CVE-2019-16018 | A vulnerability in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of a BGP update message that contains crafted EVPN attributes. An attacker could indirectly exploit the vulnerability by sending BGP EVPN update messages with a specific, malformed attribute to an affected system and waiting for a user on the device to display the EVPN operational routes’ status. If successful, the attacker could cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer. |
| CVE-2019-1573 | GlobalProtect Agent 4.1.0 for Windows and GlobalProtect Agent 4.1.10 and earlier for macOS may allow a local authenticated attacker who has compromised the end-user account and gained the ability to inspect memory, to access authentication and/or session tokens and replay them to spoof the VPN session and gain access as the user. |
| CVE-2019-15705 | An Improper Input Validation vulnerability in the SSL VPN portal of FortiOS versions 6.2.1 and below, and 6.0.6 and below may allow an unauthenticated remote attacker to crash the SSL VPN service by sending a crafted POST request. |
| CVE-2019-15704 | A clear text storage of sensitive information vulnerability in FortiClient for Mac may allow a local attacker to read sensitive information logged in the console window when the user connects to an SSL VPN Gateway. |
| CVE-2019-15261 | A vulnerability in the Point-to-Point Tunneling Protocol (PPTP) VPN packet processing functionality in Cisco Aironet Access Points (APs) could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Generic Routing Encapsulation (GRE) frames that pass through the data plane of an affected AP. An attacker could exploit this vulnerability by associating to a vulnerable AP, initiating a PPTP VPN connection to an arbitrary PPTP VPN server, and sending a malicious GRE frame through the data plane of the AP. A successful exploit could allow the attacker to cause an internal process of the targeted AP to crash, which in turn would cause the AP to reload. The AP reload would cause a DoS condition for clients that are associated with the AP. |
| CVE-2019-15256 | A vulnerability in the Internet Key Exchange version 1 (IKEv1) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper management of system memory. An attacker could exploit this vulnerability by sending malicious IKEv1 traffic to an affected device. The attacker does not need valid credentials to authenticate the VPN session, nor does the attacker's source address need to match a peer statement in the crypto map applied to the ingress interface of the affected device. An exploit could allow the attacker to exhaust system memory resources, leading to a reload of an affected device. |
| CVE-2019-14899 | A vulnerability was discovered in Linux, FreeBSD, OpenBSD, MacOS, iOS, and Android that allows a malicious access point, or an adjacent user, to determine if a connected user is using a VPN, make positive inferences about the websites they are visiting, and determine the correct sequence and acknowledgement numbers in use, allowing the bad actor to inject data into the TCP stream. This provides everything that is needed for an attacker to hijack active connections inside the VPN tunnel. |
| CVE-2019-12695 | A vulnerability in the Clientless SSL VPN (WebVPN) portal of Cisco Adaptive Security Appliance (ASA) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. |
| CVE-2019-12677 | A vulnerability in the Secure Sockets Layer (SSL) VPN feature of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition that prevents the creation of new SSL/Transport Layer Security (TLS) connections to an affected device. The vulnerability is due to incorrect handling of Base64-encoded strings. An attacker could exploit this vulnerability by opening many SSL VPN sessions to an affected device. The attacker would need to have valid user credentials on the affected device to exploit this vulnerability. A successful exploit could allow the attacker to overwrite a special system memory location, which will eventually result in memory allocation errors for new SSL/TLS sessions to the device, preventing successful establishment of these sessions. A reload of the device is required to recover from this condition. Established SSL/TLS connections to the device and SSL/TLS connections through the device are not affected. Note: Although this vulnerability is in the SSL VPN feature, successful exploitation of this vulnerability would affect all new SSL/TLS sessions to the device, including management sessions. |
| CVE-2019-12579 | A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v82 for Linux and macOS could allow an authenticated, local attacker to run arbitrary code with elevated privileges. The PIA Linux/macOS binary openvpn_launcher.64 binary is setuid root. This binary accepts several parameters to update the system configuration. These parameters are passed to operating system commands using a "here" document. The parameters are not sanitized, which allow for arbitrary commands to be injected using shell metacharacters. A local unprivileged user can pass special crafted parameters that will be interpolated by the operating system calls. |
| CVE-2019-12578 | A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v82 for Linux could allow an authenticated, local attacker to run arbitrary code with elevated privileges. The openvpn_launcher.64 binary is setuid root. This binary executes /opt/pia/openvpn-64/openvpn, passing the parameters provided from the command line. Care was taken to programmatically disable potentially dangerous openvpn parameters; however, the --route-pre-down parameter can be used. This parameter accepts an arbitrary path to a script/program to be executed when OpenVPN exits. The --script-security parameter also needs to be passed to allow for this action to be taken, and --script-security is not currently in the disabled parameter list. A local unprivileged user can pass a malicious script/binary to the --route-pre-down option, which will be executed as root when openvpn is stopped. |
| CVE-2019-12577 | A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v82 for macOS could allow an authenticated, local attacker to run arbitrary code with elevated privileges. The macOS binary openvpn_launcher.64 is setuid root. This binary creates /tmp/pia_upscript.sh when executed. Because the file creation mask (umask) is not reset, the umask value is inherited from the calling process. This value can be manipulated to cause the privileged binary to create files with world writable permissions. A local unprivileged user can modify /tmp/pia_upscript.sh during the connect process to execute arbitrary code as the root user. |
| CVE-2019-12576 | A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v82 for macOS could allow an authenticated, local attacker to run arbitrary code with elevated privileges. The openvpn_launcher binary is setuid root. This program is called during the connection process and executes several operating system utilities to configure the system. The networksetup utility is called using relative paths. A local unprivileged user can execute arbitrary commands as root by creating a networksetup trojan which will be executed during the connection process. This is possible because the PATH environment variable is not reset prior to executing the OS utility. |
| CVE-2019-12575 | A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v82 for Linux could allow an authenticated, local attacker to run arbitrary code with elevated privileges. The root_runner.64 binary is setuid root. This binary executes /opt/pia/ruby/64/ruby, which in turn attempts to load several libraries under /tmp/ruby-deploy.old/lib. A local unprivileged user can create a malicious library under this path to execute arbitrary code as the root user. |
| CVE-2019-12574 | A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v1.0 for Windows could allow an authenticated, local attacker to run arbitrary code with elevated privileges. The PIA client is vulnerable to a DLL injection vulnerability during the software update process. The updater loads several libraries from a folder that authenticated users have write access to. A low privileged user can leverage this vulnerability to execute arbitrary code as SYSTEM. |
| CVE-2019-12573 | A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v82 for Linux and macOS could allow an authenticated, local attacker to overwrite arbitrary files. The openvpn_launcher binary is setuid root. This binary supports the --log option, which accepts a path as an argument. This parameter is not sanitized, which allows a local unprivileged user to overwrite arbitrary files owned by any user on the system, including root. This creates a denial of service condition and possible data loss if leveraged by a malicious local user. |
| CVE-2019-12572 | A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client 1.0.2 (build 02363) for Windows could allow an authenticated, local attacker to run arbitrary code with elevated privileges. On startup, the PIA Windows service (pia-service.exe) loads the OpenSSL library from %PROGRAMFILES%\Private Internet Access\libeay32.dll. This library attempts to load the C:\etc\ssl\openssl.cnf configuration file which does not exist. By default on Windows systems, authenticated users can create directories under C:\. A low privileged user can create a C:\etc\ssl\openssl.cnf configuration file to load a malicious OpenSSL engine library resulting in arbitrary code execution as SYSTEM when the service starts. |
| CVE-2019-12571 | A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v0.9.8 beta (build 02099) for macOS could allow an authenticated, local attacker to overwrite arbitrary files. When the client initiates a connection, the XML /tmp/pia-watcher.plist file is created. If the file exists, it will be truncated and the contents completely overwritten. This file is removed on disconnect. An unprivileged user can create a hard or soft link to arbitrary files owned by any user on the system, including root. This creates a denial of service condition and possible data loss if leveraged by a malicious local user. |
| CVE-2019-12494 | In Gardener before 0.20.0, incorrect access control in seed clusters allows information disclosure by sending HTTP GET requests from one's own shoot clusters to foreign shoot clusters. This occurs because traffic from shoot to seed via the VPN endpoint is not blocked. |
| CVE-2019-11868 | See.sys, up to version 4.25, in SoftEther VPN Server versions 4.29 or older, allows a user to call an IOCTL specifying any kernel address to which arbitrary bytes are written to. |
| CVE-2019-0066 | An unexpected status return value weakness in the Next-Generation Multicast VPN (NG-mVPN) service of Juniper Networks Junos OS allows attacker to cause a Denial of Service (DoS) condition and core the routing protocol daemon (rpd) process when a specific malformed IPv4 packet is received by the device running BGP. This malformed packet can be crafted and sent to a victim device including when forwarded directly through a device receiving such a malformed packet, but not if the malformed packet is first de-encapsulated from an encapsulated format by a receiving device. Continued receipt of the malformed packet will result in a sustained Denial of Service condition. This issue affects: Juniper Networks Junos OS 15.1 versions prior to 15.1F6-S12, 15.1R7-S2; 15.1X49 versions prior to 15.1X49-D150 on SRX Series; 15.1X53 versions prior to 15.1X53-D68, 15.1X53-D235, 15.1X53-D495, 15.1X53-D590; 16.1 versions prior to 16.1R3-S10, 16.1R4-S12, 16.1R6-S6, 16.1R7-S2; 16.2 versions prior to 16.2R2-S7; 17.1 versions prior to 17.1R2-S9, 17.1R3; 17.2 versions prior to 17.2R1-S7, 17.2R2-S6, 17.2R3; 17.3 versions prior to 17.3R2-S4, 17.3R3. |
| CVE-2019-0015 | A vulnerability in the SRX Series Service Gateway allows deleted dynamic VPN users to establish dynamic VPN connections until the device is rebooted. A deleted dynamic VPN connection should be immediately disallowed from establishing new VPN connections. Due to an error in token caching, deleted users are allowed to connect once a previously successful dynamic VPN connection has been established. A reboot is required to clear the cached authentication token. Affected releases are Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D75; 15.1X49 versions prior to 15.1X49-D150; 17.3 versions prior to 17.3R3; 17.4 versions prior to 17.4R2; 18.1 versions prior to 18.1R3; 18.2 versions prior to 18.2R2. |
| CVE-2018-9438 | When a device connects only over WiFi VPN, the device may not receive security updates due to some incorrect checks. This could lead to a local denial of service of security updates with no additional execution privileges needed. User interaction is needed for exploitation. Product: Android Versions: Android-8.1 Android ID: A-78644887. |
| CVE-2018-9129 | ZyXEL ZyWALL/USG series devices have a Bleichenbacher vulnerability in their Internet Key Exchange (IKE) handshake implementation used for IPsec based VPN connections. |
| CVE-2018-8929 | Improper restriction of communication channel to intended endpoints vulnerability in HTTP daemon in Synology SSL VPN Client before 1.2.4-0224 allows remote attackers to conduct man-in-the-middle attacks via a crafted payload. |
| CVE-2018-8739 | VPN Unlimited 4.2.0 for macOS suffers from a root privilege escalation vulnerability in its privileged helper tool. The privileged helper tool implements an XPC interface, which allows arbitrary applications to execute system commands as root. |
| CVE-2018-7716 | PrivateVPN 2.0.31 for macOS suffers from a root privilege escalation vulnerability with its com.privat.vpn.helper privileged helper tool. This privileged helper tool implements an XPC service that allows arbitrary installed applications to connect and send messages. The XPC service extracts the config string from the corresponding XPC message. This string is supposed to point to an internal OpenVPN configuration file. If a new connection has not already been established, an attacker can send the XPC service a malicious XPC message with the config string pointing at an OpenVPN configuration file that he or she controls. In the configuration file, an attacker can specify a dynamic library plugin that should run for every new VPN connection. This plugin will execute code in the context of the root user. |
| CVE-2018-7572 | Pulse Secure Client 9.0R1 and 5.3RX before 5.3R5, when configured to authenticate VPN users during Windows Logon, can allow attackers to bypass Windows authentication and execute commands on the system with the privileges of Pulse Secure Client. The attacker must interrupt the client's network connectivity, and trigger a connection to a crafted proxy server with an invalid SSL certificate that allows certification-manager access, leading to the ability to browse local files and execute local programs. |
| CVE-2018-7311 | ** DISPUTED ** PrivateVPN 2.0.31 for macOS suffers from a root privilege escalation vulnerability. The software installs a privileged helper tool that runs as the root user. This privileged helper tool is installed as a LaunchDaemon and implements an XPC service. The XPC service is responsible for handling new VPN connection operations via the main PrivateVPN application. The privileged helper tool creates new VPN connections by executing the openvpn binary located in the /Applications/PrivateVPN.app/Contents/Resources directory. The openvpn binary can be overwritten by the default user, which allows an attacker that has already installed malicious software as the default user to replace the binary. When a new VPN connection is established, the privileged helper tool will launch this malicious binary, thus allowing an attacker to execute code as the root user. NOTE: the vendor has reportedly indicated that this behavior is "an acceptable part of their software." |
| CVE-2018-6823 | In the VPN client in Mailbutler Shimo before 4.1.5.1 on macOS, the com.feingeist.shimo.helper tool LaunchDaemon implements an unprotected XPC service that can be abused to execute scripts as root. |
| CVE-2018-6623 | An issue was discovered in Hola 1.79.859. An unprivileged user could modify or overwrite the executable with arbitrary code, which would be executed the next time the service is started. Depending on the user that the service runs as, this could result in privilege escalation. The issue exists because of the SERVICE_ALL_ACCESS access right for the hola_svc and hola_updater services. |
| CVE-2018-6460 | Hotspot Shield runs a webserver with a static IP address 127.0.0.1 and port 895. The web server uses JSONP and hosts sensitive information including configuration. User controlled input is not sufficiently filtered: an unauthenticated attacker can send a POST request to /status.js with the parameter func=$_APPLOG.Rfunc and extract sensitive information about the machine, including whether the user is connected to a VPN, to which VPN he/she is connected, and what is their real IP address. |
| CVE-2018-4010 | An exploitable code execution vulnerability exists in the connect functionality of ProtonVPN VPN client 1.5.1. A specially crafted configuration file can cause a privilege escalation, resulting in the ability to execute arbitrary commands with the system's privileges. |
| CVE-2018-4009 | An exploitable privilege escalation vulnerability exists in the Shimo VPN helper service due to improper validation of code signing. A user with local access can use this vulnerability to raise their privileges to root. An attacker would need local access to the machine to successfully exploit this bug. |
| CVE-2018-4008 | An exploitable privilege escalation vulnerability exists in the Shimo VPN 4.1.5.1 helper service in the RunVpncScript command. The command takes a user-supplied script argument and executes it under root context. A user with local access can use this vulnerability to raise their privileges to root. An attacker would need local access to the machine to successfully exploit this bug. |
| CVE-2018-4007 | An exploitable privilege escalation vulnerability exists in the Shimo VPN 4.1.5.1 helper service in the deleteConfig functionality. The program is able to delete any protected file on the system. An attacker would need local access to the machine to successfully exploit the bug. |
| CVE-2018-4006 | An exploitable privilege escalation vulnerability exists in the Shimo VPN 4.1.5.1 helper service in the writeConfig functionality. A non-root user is able to write a file anywhere on the system. A user with local access can use this vulnerability to raise their privileges to root. An attacker would need local access to the machine to exploit it successfully. |
| CVE-2018-4005 | An exploitable privilege escalation vulnerability exists in the Shimo VPN 4.1.5.1 helper service in the configureRoutingWithCommand function. A user with local access can use this vulnerability to raise their privileges to root. An attacker would need local access to the machine for a successful exploit. |
| CVE-2018-4004 | An exploitable privilege escalation vulnerability exists in the Shimo VPN 4.1.5.1 helper service in the disconnectService functionality. A non-root user is able to kill any privileged process on the system. An attacker would need local access to the machine for a successful exploit. |
| CVE-2018-20812 | An information exposure issue where IPv6 DNS traffic would be sent outside of the VPN tunnel (when Traffic Enforcement was enabled) exists in Pulse Secure Pulse Secure Desktop 9.0R1 and below. This is applicable only to dual-stack (IPv4/IPv6) endpoints. |
| CVE-2018-20193 | Certain Secure Access SA Series SSL VPN products (originally developed by Juniper Networks but now sold and supported by Pulse Secure, LLC) allow privilege escalation, as demonstrated by Secure Access SSL VPN SA-4000 5.1R5 (build 9627) 4.2 Release (build 7631). This occurs because appropriate controls are not performed. Specifically, it is possible for a readonly user to change the administrator user password by making a local copy of the /dana-admin/user/update.cgi page, changing the "user" value, and saving the changes. |
| CVE-2018-16758 | Missing message authentication in the meta-protocol in Tinc VPN version 1.0.34 and earlier allows a man-in-the-middle attack to disable the encryption of VPN packets. |
| CVE-2018-15490 | An issue was discovered in ExpressVPN on Windows. The Xvpnd.exe process (which runs as a service with SYSTEM privileges) listens on TCP port 2015, which is used as an RPC interface for communication with the client side of the ExpressVPN application. A JSON-RPC protocol over HTTP is used for communication. The JSON-RPC XVPN.GetPreference and XVPN.SetPreference methods are vulnerable to path traversal, and allow reading and writing files on the file system on behalf of the service. |
| CVE-2018-15399 | A vulnerability in the TCP syslog module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust the 1550-byte buffers on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing boundary check in an internal function. An attacker could exploit this vulnerability by establishing a man-in-the-middle position between an affected device and its configured TCP syslog server and then maliciously modifying the TCP header in segments that are sent from the syslog server to the affected device. A successful exploit could allow the attacker to exhaust buffer on the affected device and cause all TCP-based features to stop functioning, resulting in a DoS condition. The affected TCP-based features include AnyConnect SSL VPN, clientless SSL VPN, and management connections such as Secure Shell (SSH), Telnet, and HTTPS. |
| CVE-2018-15397 | A vulnerability in the implementation of Traffic Flow Confidentiality (TFC) over IPsec functionality in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to an error that may occur if the affected software renegotiates the encryption key for an IPsec tunnel when certain TFC traffic is in flight. An attacker could exploit this vulnerability by sending a malicious stream of TFC traffic through an established IPsec tunnel on an affected device. A successful exploit could allow the attacker to cause a daemon process on the affected device to crash, which could cause the device to crash and result in a DoS condition. |
| CVE-2018-13384 | A Host Header Redirection vulnerability in Fortinet FortiOS all versions below 6.0.5 under SSL VPN web portal allows a remote attacker to potentially poison HTTP cache and subsequently redirect SSL VPN web portal users to arbitrary web domains. |
| CVE-2018-13383 | A heap buffer overflow in Fortinet FortiOS 6.0.0 through 6.0.4, 5.6.0 through 5.6.10, 5.4.0 through 5.4.12, 5.2.14 and earlier and FortiProxy 2.0.0, 1.2.8 and earlier in the SSL VPN web portal may cause the SSL VPN web service termination for logged in users due to a failure to properly handle javascript href data when proxying webpages. |
| CVE-2018-13382 | An Improper Authorization vulnerability in Fortinet FortiOS 6.0.0 to 6.0.4, 5.6.0 to 5.6.8 and 5.4.1 to 5.4.10 and FortiProxy 2.0.0, 1.2.0 to 1.2.8, 1.1.0 to 1.1.6, 1.0.0 to 1.0.7 under SSL VPN web portal allows an unauthenticated attacker to modify the password of an SSL VPN web portal user via specially crafted HTTP requests |
| CVE-2018-13381 | A buffer overflow vulnerability in Fortinet FortiOS 6.0.0 through 6.0.4, 5.6.0 through 5.6.7, 5.4 and earlier versions and FortiProxy 2.0.0, 1.2.8 and earlier versions under SSL VPN web portal allows a non-authenticated attacker to perform a Denial-of-service attack via special craft message payloads. |
| CVE-2018-13380 | A Cross-site Scripting (XSS) vulnerability in Fortinet FortiOS 6.0.0 to 6.0.4, 5.6.0 to 5.6.7, 5.4.0 to 5.4.12, 5.2 and below and Fortinet FortiProxy 2.0.0, 1.2.8 and below under SSL VPN web portal allows attacker to execute unauthorized malicious script code via the error or message handling parameters. |
| CVE-2018-13379 | An Improper Limitation of a Pathname to a Restricted Directory ("Path Traversal") in Fortinet FortiOS 6.0.0 to 6.0.4, 5.6.3 to 5.6.7 and 5.4.6 to 5.4.12 and FortiProxy 2.0.0, 1.2.0 to 1.2.8, 1.1.0 to 1.1.6, 1.0.0 to 1.0.7 under SSL VPN web portal allows an unauthenticated attacker to download system files via special crafted HTTP resource requests. |
| CVE-2018-13283 | Lack of administrator control over security vulnerability in client.cgi in Synology SSL VPN Client before 1.2.5-0226 allows remote attackers to conduct man-in-the-middle attacks via the (1) command, (2) hostname, or (3) port parameter. |
| CVE-2018-11479 | The VPN component in Windscribe 1.81 uses the OpenVPN client for connections. Also, it creates a WindScribeService.exe system process that establishes a \\.\pipe\WindscribeService named pipe endpoint that allows the Windscribe VPN process to connect and execute an OpenVPN process or other processes (like taskkill, etc.). There is no validation of the program name before constructing the lpCommandLine argument for a CreateProcess call. An attacker can run any malicious process with SYSTEM privileges through this named pipe. |
| CVE-2018-11078 | Dell EMC VPlex GeoSynchrony, versions prior to 6.1, contains an Insecure File Permissions vulnerability. A remote authenticated malicious user could read from VPN configuration files on and potentially author a MITM attack on the VPN traffic. |
| CVE-2018-10647 | SaferVPN 4.2.5 for Windows suffers from a SYSTEM privilege escalation vulnerability in its "SaferVPN.Service" service. The "SaferVPN.Service" service executes "openvpn.exe" using OpenVPN config files located within the current user's %LOCALAPPDATA%\SaferVPN\OvpnConfig directory. An authenticated attacker may modify these configuration files to specify a dynamic library plugin that should run for every new VPN connection attempt. This plugin will execute code in the context of the SYSTEM user. |
| CVE-2018-10646 | CyberGhost 6.5.0.3180 for Windows suffers from a SYSTEM privilege escalation vulnerability through the "CG6Service" service. This service establishes a NetNamedPipe endpoint that allows arbitrary installed applications to connect and call publicly exposed methods. The "ConnectToVpnServer" method accepts a "connectionParams" argument that provides attacker control of the OpenVPN command line. An attacker can specify a dynamic library plugin that should run for every new VPN connection attempt. This plugin will execute code in the context of the SYSTEM user. |
| CVE-2018-10645 | Golden Frog VyprVPN 2.12.1.8015 for Windows suffers from a SYSTEM privilege escalation vulnerability through the "VyprVPN" service. This service establishes a NetNamedPipe endpoint that allows applications to connect and call publicly exposed methods. The "SetProperty" method allows an attacker to configure the "AdditionalOpenVpnParameters" property and control the OpenVPN command line. Using the OpenVPN "plugin" parameter, an attacker may specify a dynamic library plugin that should run for every new VPN connection attempt. This plugin will execute code in the context of the SYSTEM user. This attack may be conducted using "VyprVPN Free" account credentials and the VyprVPN Desktop Client. |
| CVE-2018-10381 | TunnelBear 3.2.0.6 for Windows suffers from a SYSTEM privilege escalation vulnerability through the "TunnelBearMaintenance" service. This service establishes a NetNamedPipe endpoint that allows arbitrary installed applications to connect and call publicly exposed methods. The "OpenVPNConnect" method accepts a server list argument that provides attacker control of the OpenVPN command line. An attacker can specify a dynamic library plugin that should run for every new VPN connection attempt. This plugin will execute code in the context of the SYSTEM user. |
| CVE-2018-10204 | PureVPN 6.0.1 for Windows suffers from a SYSTEM privilege escalation vulnerability in its "sevpnclient" service. When configured to use the OpenVPN protocol, the "sevpnclient" service executes "openvpn.exe" using the OpenVPN config file located at %PROGRAMDATA%\purevpn\config\config.ovpn. This file allows "Write" permissions to users in the "Everyone" group. An authenticated attacker may modify this file to specify a dynamic library plugin that should run for every new VPN connection attempt. This plugin will execute code in the context of the SYSTEM account. |
| CVE-2018-10190 | A vulnerability in London Trust Media Private Internet Access (PIA) VPN Client v77 for Windows could allow an unauthenticated, local attacker to run executable files with elevated privileges. The vulnerability is due to insufficient implementation of access controls. The "Changelog" and "Help" options available from the system tray context menu spawn an elevated instance of the user's default web browser. An attacker could exploit this vulnerability by selecting "Run as Administrator" from the context menu of an executable file within the file browser of the spawned default web browser. This may allow the attacker to execute privileged commands on the targeted system. |
| CVE-2018-10170 | NordVPN 6.12.7.0 for Windows suffers from a SYSTEM privilege escalation vulnerability through the "nordvpn-service" service. This service establishes an NetNamedPipe endpoint that allows arbitrary installed applications to connect and call publicly exposed methods. The "Connect" method accepts a class instance argument that provides attacker control of the OpenVPN command line. An attacker can specify a dynamic library plugin that should run for every new VPN connection attempt. This plugin will execute code in the context of the SYSTEM user. |
| CVE-2018-10169 | ProtonVPN 1.3.3 for Windows suffers from a SYSTEM privilege escalation vulnerability through the "ProtonVPN Service" service. This service establishes an NetNamedPipe endpoint that allows arbitrary installed applications to connect and call publicly exposed methods. The "Connect" method accepts a class instance argument that provides attacker control of the OpenVPN command line. An attacker can specify a dynamic library plugin that should run for every new VPN connection. This plugin will execute code in the context of the SYSTEM user. |
| CVE-2018-1000135 | GNOME NetworkManager version 1.10.2 and earlier contains a Information Exposure (CWE-200) vulnerability in DNS resolver that can result in Private DNS queries leaked to local network's DNS servers, while on VPN. This vulnerability appears to have been fixed in Some Ubuntu 16.04 packages were fixed, but later updates removed the fix. cf. https://bugs.launchpad.net/ubuntu/+bug/1754671 an upstream fix does not appear to be available at this time. |
| CVE-2018-0426 | A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to gain access to sensitive information. The vulnerability is due to improper validation of directory traversal character sequences within the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to the targeted device. A successful exploit could allow the attacker to gain access to arbitrary files on the affected device, resulting in the disclosure of sensitive information. |
| CVE-2018-0425 | A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to gain access to sensitive information. The vulnerability is due to improper access control to files within the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to gain access to sensitive configuration information, including user authentication credentials. |
| CVE-2018-0424 | A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input to scripts by the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the root user. |
| CVE-2018-0423 | A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to cause a denial of service condition or to execute arbitrary code. The vulnerability is due to improper boundary restrictions on user-supplied input in the Guest user feature of the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device, triggering a buffer overflow condition. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a denial of service condition, or could allow the attacker to execute arbitrary code. |
| CVE-2018-0405 | A vulnerability in the web framework code for Cisco RV180W Wireless-N Multifunction VPN Router and Small Business RV Series RV220W Wireless Network Security Firewall could allow an unauthenticated, remote attacker to conduct a directory path traversal attack on a targeted device. The issue is due to improper sanitization of user-supplied input in HTTP request parameters that describe filenames. An attacker could exploit this vulnerability by using directory traversal techniques to submit a path to a desired file location. |
| CVE-2018-0404 | A vulnerability in the web framework code for Cisco RV180W Wireless-N Multifunction VPN Router and Small Business RV Series RV220W Wireless Network Security Firewall could allow an unauthenticated, remote attacker to execute arbitrary SQL queries. The attacker could retrieve sensitive information which should be restricted. A vulnerability in the web framework code for Cisco RV180W Wireless-N Multifunction VPN Router and Small Business RV Series RV220W Wireless Network Security Firewall could allow an unauthenticated, remote attacker to execute arbitrary SQL queries. The attacker could retrieve sensitive information which should be restricted. The product has entered the end-of-life phase and there will be no more firmware fixes. |
| CVE-2018-0350 | A vulnerability in the VPN subsystem configuration in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected parameter in a web page. The attacker must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69808, CSCvi69810, CSCvi69814, CSCvi69822, CSCvi69827, CSCvi69828, CSCvi69836. |
| CVE-2018-0348 | A vulnerability in the CLI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the load command within the VPN subsystem. The attacker must be authenticated to access the affected CLI parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69866. |
| CVE-2018-0333 | A vulnerability in the VPN configuration management of Cisco FireSIGHT System Software could allow an unauthenticated, remote attacker to bypass VPN security due to unintended side effects of dynamic configuration changes that could allow an attacker to bypass configured policies. The vulnerability is due to incorrect management of the configured interface names and VPN parameters when dynamic CLI configuration changes are performed. An attacker could exploit this vulnerability by sending packets through an interface on the targeted device. A successful exploit could allow the attacker to bypass configured VPN policies. Cisco Bug IDs: CSCvh49388. |
| CVE-2018-0273 | A vulnerability in the IPsec Manager of Cisco StarOS for Cisco Aggregation Services Router (ASR) 5000 Series Routers and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to terminate all active IPsec VPN tunnels and prevent new tunnels from being established, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of corrupted Internet Key Exchange Version 2 (IKEv2) messages. An attacker could exploit this vulnerability by sending crafted IKEv2 messages toward an affected router. A successful exploit could allow the attacker to cause the ipsecmgr service to reload. A reload of this service could cause all IPsec VPN tunnels to be terminated and prevent new tunnels from being established until the service has restarted, resulting in a DoS condition. This vulnerability affects the following Cisco products when they are running Cisco StarOS: Cisco Aggregation Services Router (ASR) 5000 Series Routers, Virtualized Packet Core (VPC) System Software. Cisco Bug IDs: CSCve29605. |
| CVE-2018-0251 | A vulnerability in the Web Server Authentication Required screen of the Clientless Secure Sockets Layer (SSL) VPN portal of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of that portal on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the portal or allow the attacker to access sensitive browser-based information. This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco ASA Software: 3000 Series Industrial Security Appliances, Adaptive Security Virtual Appliance (ASAv), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches, ASA Services Module for Cisco 7600 Series Routers. Cisco Bug IDs: CSCvh20742. |
| CVE-2018-0229 | A vulnerability in the implementation of Security Assertion Markup Language (SAML) Single Sign-On (SSO) authentication for Cisco AnyConnect Secure Mobility Client for Desktop Platforms, Cisco Adaptive Security Appliance (ASA) Software, and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. The authentication would need to be done by an unsuspecting third party, aka Session Fixation. The vulnerability exists because there is no mechanism for the ASA or FTD Software to detect that the authentication request originates from the AnyConnect client directly. An attacker could exploit this vulnerability by persuading a user to click a crafted link and authenticating using the company's Identity Provider (IdP). A successful exploit could allow the attacker to hijack a valid authentication token and use that to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. This vulnerability affects the Cisco AnyConnect Secure Mobility Client, and ASA Software and FTD Software configured for SAML 2.0-based SSO for AnyConnect Remote Access VPN that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvg65072, CSCvh87448. |
| CVE-2018-0227 | A vulnerability in the Secure Sockets Layer (SSL) Virtual Private Network (VPN) Client Certificate Authentication feature for Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to establish an SSL VPN connection and bypass certain SSL certificate verification steps. The vulnerability is due to incorrect verification of the SSL Client Certificate. An attacker could exploit this vulnerability by connecting to the ASA VPN without a proper private key and certificate pair. A successful exploit could allow the attacker to establish an SSL VPN connection to the ASA when the connection should have been rejected. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvg40155. |
| CVE-2018-0154 | A vulnerability in the crypto engine of the Cisco Integrated Services Module for VPN (ISM-VPN) running Cisco IOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient handling of VPN traffic by the affected device. An attacker could exploit this vulnerability by sending crafted VPN traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to hang or crash, resulting in a DoS condition. Cisco Bug IDs: CSCvd39267. |
| CVE-2018-0127 | A vulnerability in the web interface of Cisco RV132W ADSL2+ Wireless-N VPN Routers and Cisco RV134W VDSL2 Wireless-AC VPN Routers could allow an unauthenticated, remote attacker to view configuration parameters for an affected device, which could lead to the disclosure of confidential information. The vulnerability is due to the absence of user authentication requirements for certain pages that are part of the web interface and contain confidential information for an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device and examining the HTTP response to the request. A successful exploit could allow the attacker to view configuration parameters, including the administrator password, for the affected device. Cisco Bug IDs: CSCvg92739, CSCvh60172. |
| CVE-2018-0125 | A vulnerability in the web interface of the Cisco RV132W ADSL2+ Wireless-N VPN and RV134W VDSL2 Wireless-AC VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system, including issuing commands with root privileges. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to an incomplete input validation on user-controlled input in an HTTP request to the targeted device. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to execute arbitrary code as the root user and gain full control of the affected system or cause it to reload, resulting in a DoS condition. This vulnerability is fixed in firmware version 1.0.1.11 for the following Cisco products: RV132W ADSL2+ Wireless-N VPN Router and RV134W VDSL2 Wireless-AC VPN Router. Cisco Bug IDs: CSCvg92737, CSCvh60170. |
| CVE-2018-0101 | A vulnerability in the Secure Sockets Layer (SSL) VPN functionality of the Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause a reload of the affected system or to remotely execute code. The vulnerability is due to an attempt to double free a region of memory when the webvpn feature is enabled on the Cisco ASA device. An attacker could exploit this vulnerability by sending multiple, crafted XML packets to a webvpn-configured interface on the affected system. An exploit could allow the attacker to execute arbitrary code and obtain full control of the system, or cause a reload of the affected device. This vulnerability affects Cisco ASA Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, Firepower Threat Defense Software (FTD). Cisco Bug IDs: CSCvg35618. |
| CVE-2018-0056 | If a duplicate MAC address is learned by two different interfaces on an MX Series device, the MAC address learning function correctly flaps between the interfaces. However, the Layer 2 Address Learning Daemon (L2ALD) daemon might crash when attempting to delete the duplicate MAC address when the particular entry is not found in the internal MAC address table. This issue only occurs on MX Series devices with l2-backhaul VPN configured. No other products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S1 on MX Series; 16.1 versions prior to 16.1R4-S12, 16.1R6-S6 on MX Series; 16.2 versions prior to 16.2R2-S7 on MX Series; 17.1 versions prior to 17.1R2-S9 on MX Series; 17.2 versions prior to 17.2R1-S7, 17.2R2-S6 on MX Series; 17.3 versions prior to 17.3R2-S4, 17.3R3-S1 on MX Series; 17.4 versions prior to 17.4R1-S5 on MX Series; 18.1 versions prior to 18.1R2 on MX Series. |
| CVE-2018-0045 | Receipt of a specific Draft-Rosen MVPN control packet may cause the routing protocol daemon (RPD) process to crash and restart or may lead to remote code execution. By continuously sending the same specific Draft-Rosen MVPN control packet, an attacker can repeatedly crash the RPD process causing a prolonged denial of service. This issue may occur when the Junos OS device is configured for Draft-Rosen multicast virtual private network (MVPN). The VPN is multicast-enabled and configured to use Protocol Independent Multicast (PIM) protocol within the VPN. This issue can only be exploited from the PE device within the MPLS domain which is capable of forwarding IP multicast traffic in core. End-users connected to the CE device cannot cause this crash. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D70 on SRX Series; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1F6; 15.1X49 versions prior to 15.1X49-D140 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D67 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 16.1 versions prior to 16.1R4-S9, 16.1R5-S4, 16.1R6-S3, 16.1R7; 16.2 versions prior to 16.2R1-S6, 16.2R2-S6, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R2-S4, 17.2R3; 17.3 versions prior to 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S3, 17.4R2; 18.1 versions prior to 18.1R2. No other Juniper Networks products or platforms are affected by this issue. |
| CVE-2017-7935 | A Resource Exhaustion issue was discovered in Phoenix Contact GmbH mGuard firmware versions 8.3.0 to 8.4.2. An attacker may compromise the device's availability by performing multiple initial VPN requests. |
| CVE-2017-7738 | An Information Disclosure vulnerability in Fortinet FortiOS 5.6.0 to 5.6.2, 5.4.0 to 5.4.5, 5.2 and below versions allow an admin user with super_admin privileges to view the current SSL VPN web portal session info which may contains user credentials through the fnsysctl CLI command. |
| CVE-2017-7344 | A privilege escalation in Fortinet FortiClient Windows 5.4.3 and earlier as well as 5.6.0 allows attacker to gain privilege via exploiting the Windows "security alert" dialog thereby popping up when the "VPN before logon" feature is enabled and an untrusted certificate chain. |
| CVE-2017-6784 | A vulnerability in the web interface of the Cisco RV340, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to access sensitive data. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to Cisco WebEx Meetings not sufficiently protecting sensitive data when responding to an HTTP request to the web interface. An attacker could exploit the vulnerability by attempting to use the HTTP protocol and looking at the data in the HTTP responses from the Cisco WebEx Meetings Server. An exploit could allow the attacker to find sensitive information about the application. Cisco Bug IDs: CSCve37988. Known Affected Releases: firmware 1.0.0.30, 1.0.0.33, 1.0.1.9, 1.0.1.16. |
| CVE-2017-6620 | A vulnerability in the remote management access control list (ACL) feature of the Cisco CVR100W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass the remote management ACL. The vulnerability is due to incorrect implementation of the ACL decision made during the ingress connection request to the remote management interface. An attacker could exploit this vulnerability by sending a connection to the management IP address or domain name of the targeted device. A successful exploit could allow the attacker to bypass the configured remote management ACL. This can occur when the Remote Management configuration parameter is set to Disabled. This vulnerability affects Cisco CVR100W Wireless-N VPN Routers running a firmware image prior to 1.0.1.24. Cisco Bug IDs: CSCvc14457. |
| CVE-2017-6129 | In F5 BIG-IP APM software version 13.0.0 and 12.1.2, in some circumstances, APM tunneled VPN flows can cause a VPN/PPP connflow to be prematurely freed or cause TMM to stop responding with a "flow not in use" assertion. An attacker may be able to disrupt traffic or cause the BIG-IP system to fail over to another device in the device group. |
| CVE-2017-3882 | A vulnerability in the Universal Plug-and-Play (UPnP) implementation in the Cisco CVR100W Wireless-N VPN Router could allow an unauthenticated, Layer 2-adjacent attacker to execute arbitrary code or cause a denial of service (DoS) condition. The remote code execution could occur with root privileges. The vulnerability is due to incomplete range checks of the UPnP input data, which could result in a buffer overflow. An attacker could exploit this vulnerability by sending a malicious request to the UPnP listening port of the targeted device. An exploit could allow the attacker to cause the device to reload or potentially execute arbitrary code with root privileges. This vulnerability affects all firmware releases of the Cisco CVR100W Wireless-N VPN Router prior to Firmware Release 1.0.1.22. Cisco Bug IDs: CSCuz72642. |
| CVE-2017-3865 | A vulnerability in the IPsec component of Cisco StarOS for Cisco ASR 5000 Series Routers could allow an unauthenticated, remote attacker to terminate all active IPsec VPN tunnels and prevent new tunnels from establishing, resulting in a denial of service (DoS) condition. Affected Products: ASR 5000 Series Routers, Virtualized Packet Core (VPC) Software. More Information: CSCvc21129. Known Affected Releases: 21.1.0 21.1.M0.65601 21.1.v0. Known Fixed Releases: 21.2.A0.65754 21.1.b0.66164 21.1.V0.66014 21.1.R0.65759 21.1.M0.65749 21.1.0.66030 21.1.0. |
| CVE-2017-3807 | A vulnerability in Common Internet Filesystem (CIFS) code in the Clientless SSL VPN functionality of Cisco ASA Software, Major Releases 9.0-9.6, could allow an authenticated, remote attacker to cause a heap overflow. The vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by sending a crafted URL to the affected system. An exploit could allow the remote attacker to cause a reload of the affected system or potentially execute code. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid TCP connection is needed to perform the attack. The attacker needs to have valid credentials to log in to the Clientless SSL VPN portal. Vulnerable Cisco ASA Software running on the following products may be affected by this vulnerability: Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ASA for Firepower 4100 Series. Cisco Bug IDs: CSCvc23838. |
| CVE-2017-3133 | A Cross-Site Scripting vulnerability in Fortinet FortiOS versions 5.6.0 and earlier allows attackers to execute unauthorized code or commands via the Replacement Message HTML for SSL-VPN. |
| CVE-2017-2339 | A persistent cross site scripting vulnerability in NetScreen WebUI of Juniper Networks Juniper NetScreen Firewall+VPN running ScreenOS allows a user with the 'security' role to inject HTML/JavaScript content into the management session of other users including the administrator. This enables the lower-privileged user to effectively execute commands with the permissions of an administrator. This issue affects Juniper Networks ScreenOS 6.3.0 releases prior to 6.3.0r24 on SSG Series. No other Juniper Networks products or platforms are affected by this issue. |
| CVE-2017-2338 | A persistent cross site scripting vulnerability in NetScreen WebUI of Juniper Networks Juniper NetScreen Firewall+VPN running ScreenOS allows a user with the 'security' role to inject HTML/JavaScript content into the management session of other users including the administrator. This enables the lower-privileged user to effectively execute commands with the permissions of an administrator. This issue affects Juniper Networks ScreenOS 6.3.0 releases prior to 6.3.0r24 on SSG Series. No other Juniper Networks products or platforms are affected by this issue. |
| CVE-2017-2337 | A persistent cross site scripting vulnerability in NetScreen WebUI of Juniper Networks Juniper NetScreen Firewall+VPN running ScreenOS allows a user with the 'security' role to inject HTML/JavaScript content into the management session of other users including the administrator. This enables the lower-privileged user to effectively execute commands with the permissions of an administrator. This issue affects Juniper Networks ScreenOS 6.3.0 releases prior to 6.3.0r24 on SSG Series. No other Juniper Networks products or platforms are affected by this issue. |
| CVE-2017-2336 | A reflected cross site scripting vulnerability in NetScreen WebUI of Juniper Networks Juniper NetScreen Firewall+VPN running ScreenOS allows a network based attacker to inject HTML/JavaScript content into the management session of other users including the administrator. This enables the attacker to effectively execute commands with the permissions of an administrator. This issue affects Juniper Networks ScreenOS 6.3.0 releases prior to 6.3.0r24 on SSG Series. No other Juniper Networks products or platforms are affected by this issue. |
| CVE-2017-2335 | A persistent cross site scripting vulnerability in NetScreen WebUI of Juniper Networks Juniper NetScreen Firewall+VPN running ScreenOS allows a user with the 'security' role to inject HTML/JavaScript content into the management session of other users including the administrator. This enables the lower-privileged user to effectively execute commands with the permissions of an administrator. This issue affects Juniper Networks ScreenOS 6.3.0 releases prior to 6.3.0r24 on SSG Series. No other Juniper Networks products or platforms are affected by this issue. |
| CVE-2017-17543 | Users' VPN authentication credentials are unsafely encrypted in Fortinet FortiClient for Windows 5.6.0 and below versions, FortiClient for Mac OSX 5.6.0 and below versions and FortiClient SSLVPN Client for Linux 4.4.2335 and below versions, due to the use of a static encryption key and weak encryption algorithms. |
| CVE-2017-17023 | The Sophos UTM VPN endpoint interacts with client software provided by NPC Engineering (www.ncp-e.com). The affected client software, "Sophos IPSec Client" 11.04 is a rebranded version of NCP "Secure Entry Client" 10.11 r32792. A vulnerability in the software update feature of the VPN client allows a man-in-the-middle (MITM) or man-on-the-side (MOTS) attacker to execute arbitrary, malicious software on a target user's computer. This is related to SIC_V11.04-64.exe (Sophos), NCP_EntryCl_Windows_x86_1004_31799.exe (NCP), and ncpmon.exe (both Sophos and NCP). The vulnerability exists because: (1) the VPN client requests update metadata over an insecure HTTP connection; and (2) the client software does not check if the software update is signed before running it. |
| CVE-2017-16757 | Hola VPN 1.34 has weak permissions (Everyone:F) under %PROGRAMFILES%, which allows local users to gain privileges via a Trojan horse 7za.exe or hola.exe file. |
| CVE-2017-16637 | In Vectura Perfect Privacy VPN Manager v1.10.10 and v1.10.11, when resetting the network data via the software client, with a running VPN connection, a critical error occurs which leads to a "FrmAdvancedProtection" crash. Although the mechanism malfunctions and an error occurs during the runtime with the stack trace being issued, the software process is not properly terminated. The software client is still attempting to maintain the connection even though the network connection information is being reset live. In that insecure mode, the "FrmAdvancedProtection" component crashes, but the process continues to run with different errors and process corruptions. This local corruption vulnerability can be exploited by local attackers. |
| CVE-2017-15882 | The London Trust Media Private Internet Access (PIA) application before 1.3.3.1 for Android allows remote attackers to cause a denial of service (application crash) via a large VPN server-list file. |
| CVE-2017-14186 | A Cross-site Scripting (XSS) vulnerability in Fortinet FortiOS 6.0.0 to 6.0.4, 5.6.0 to 5.6.7, 5.4 and below versions under SSL VPN web portal allows a remote user to inject arbitrary web script or HTML in the context of the victim's browser via the login redir parameter. An URL Redirection attack may also be feasible by injecting an external URL via the affected parameter. |
| CVE-2017-14185 | An Information Disclosure vulnerability in Fortinet FortiOS 5.6.0 to 5.6.2, 5.4.0 to 5.4.8 and 5.2 all versions allows SSL VPN web portal users to access internal FortiOS configuration information (eg:addresses) via specifically crafted URLs inside the SSL-VPN web portal. |
| CVE-2017-14184 | An Information Disclosure vulnerability in Fortinet FortiClient for Windows 5.6.0 and below versions, FortiClient for Mac OSX 5.6.0 and below versions and FortiClient SSLVPN Client for Linux 4.4.2334 and below versions allows regular users to see each other's VPN authentication credentials due to improperly secured storage locations. |
| CVE-2017-13043 | The BGP parser in tcpdump before 4.9.2 has a buffer over-read in print-bgp.c:decode_multicast_vpn(). |
| CVE-2017-12319 | A vulnerability in the Border Gateway Protocol (BGP) over an Ethernet Virtual Private Network (EVPN) for Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a denial of service (DoS) condition, or potentially corrupt the BGP routing table, which could result in network instability. The vulnerability exists due to changes in the implementation of the BGP MPLS-Based Ethernet VPN RFC (RFC 7432) draft between IOS XE software releases. When the BGP Inclusive Multicast Ethernet Tag Route or BGP EVPN MAC/IP Advertisement Route update packet is received, it could be possible that the IP address length field is miscalculated. An attacker could exploit this vulnerability by sending a crafted BGP packet to an affected device after the BGP session was established. An exploit could allow the attacker to cause the affected device to reload or corrupt the BGP routing table; either outcome would result in a DoS. The vulnerability may be triggered when the router receives a crafted BGP message from a peer on an existing BGP session. This vulnerability affects all releases of Cisco IOS XE Software prior to software release 16.3 that support BGP EVPN configurations. If the device is not configured for EVPN, it is not vulnerable. Cisco Bug IDs: CSCui67191, CSCvg52875. |
| CVE-2017-12237 | A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco IOS 15.0 through 15.6 and Cisco IOS XE 3.5 through 16.5 could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to how an affected device processes certain IKEv2 packets. An attacker could exploit this vulnerability by sending specific IKEv2 packets to an affected device to be processed. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. This vulnerability affects Cisco devices that have the Internet Security Association and Key Management Protocol (ISAKMP) enabled. Although only IKEv2 packets can be used to trigger this vulnerability, devices that are running Cisco IOS Software or Cisco IOS XE Software are vulnerable when ISAKMP is enabled. A device does not need to be configured with any IKEv2-specific features to be vulnerable. Many features use IKEv2, including different types of VPNs such as the following: LAN-to-LAN VPN; Remote-access VPN, excluding SSL VPN; Dynamic Multipoint VPN (DMVPN); and FlexVPN. Cisco Bug IDs: CSCvc41277. |
| CVE-2016-6466 | A vulnerability in the IPsec component of StarOS for Cisco ASR 5000 Series routers could allow an unauthenticated, remote attacker to terminate all active IPsec VPN tunnels and prevent new tunnels from establishing, resulting in a denial of service (DoS) condition. This vulnerability affects the following Cisco products: Cisco ASR 5000/5500 Series routers, Cisco Virtualized Packet Core (VPC). More Information: CSCva13631. Known Affected Releases: 20.0.0 20.1.0 20.2.0 20.2.3 20.2.v1 21.0.0 21.0.M0.64246. Known Fixed Releases: 20.2.3 20.2.3.65026 20.2.a4.65307 20.2.v1 20.2.v1.65353 20.3.M0.65037 20.3.T0.65043 21.0.0 21.0.0.65256 21.0.M0.64595 21.0.M0.64860 21.0.M0.65140 21.0.V0.65052 21.0.V0.65150 21.0.V0.65366 21.0.VC0.64639 21.1.A0.64861 21.1.A0.65145 21.1.PP0.65270 21.1.R0.65130 21.1.R0.65135 21.1.R0.65154 21.1.VC0.64898 21.1.VC0.65203 21.2.A0.65147. |
| CVE-2016-6436 | Cross-site scripting (XSS) vulnerability in HostScan Engine 3.0.08062 through 3.1.14018 in the Cisco Host Scan package, as used in ASA Web VPN, allows remote attackers to inject arbitrary web script or HTML via a crafted URL, aka Bug ID CSCuz14682. |
| CVE-2016-4945 | Cross-site scripting (XSS) vulnerability in vpn/js/gateway_login_form_view.js in Citrix NetScaler Gateway 11.0 before Build 66.11 allows remote attackers to inject arbitrary web script or HTML via the NSC_TMAC cookie. |
| CVE-2016-3887 | providers/settings/SettingsProvider.java in Android 7.0 before 2016-09-01 does not properly enforce the DISALLOW_CONFIG_VPN setting, which allows attackers to bypass an intended always-on VPN state via a crafted application, aka internal bug 29899712. |
| CVE-2016-3657 | Buffer overflow in the GlobalProtect Portal in Palo Alto Networks PAN-OS before 5.0.18, 6.0.x before 6.0.13, 6.1.x before 6.1.10, and 7.0.x before 7.0.5 allows remote attackers to cause a denial of service (device crash) or possibly execute arbitrary code via an SSL VPN request. |
| CVE-2016-2342 | The bgp_nlri_parse_vpnv4 function in bgp_mplsvpn.c in the VPNv4 NLRI parser in bgpd in Quagga before 1.0.20160309, when a certain VPNv4 configuration is used, relies on a Labeled-VPN SAFI routes-data length field during a data copy, which allows remote attackers to execute arbitrary code or cause a denial of service (stack-based buffer overflow) via a crafted packet. |
| CVE-2016-2079 | VMware NSX Edge 6.1 before 6.1.7 and 6.2 before 6.2.3 and vCNS Edge 5.5 before 5.5.4.3, when the SSL-VPN feature is configured, allow remote attackers to obtain sensitive information via unspecified vectors. |
| CVE-2016-1920 | Samsung KNOX 1.0.0 uses the shared certificate on Android, which allows local users to conduct man-in-the-middle attacks as demonstrated by installing a certificate and running a VPN service. |
| CVE-2016-1430 | Cisco RV180 and RV180W devices allow remote authenticated users to execute arbitrary commands as root via a crafted HTTP request, aka Bug ID CSCuz48592. |
| CVE-2016-1429 | Directory traversal vulnerability in the web interface on Cisco RV180 and RV180W devices allows remote attackers to read arbitrary files via a crafted HTTP request, aka Bug ID CSCuz43023. |
| CVE-2016-1385 | The XML parser in Cisco Adaptive Security Appliance (ASA) Software through 9.5.2 allows remote authenticated users to cause a denial of service (instability, memory consumption, or device reload) by leveraging (1) administrative access or (2) Clientless SSL VPN access to provide a crafted XML document, aka Bug ID CSCut14209. |
| CVE-2016-1379 | Cisco Adaptive Security Appliance (ASA) Software 9.0 through 9.5.1 mishandles IPsec error processing, which allows remote authenticated users to cause a denial of service (memory consumption) via crafted (1) LAN-to-LAN or (2) Remote Access VPN tunnel packets, aka Bug ID CSCuv70576. |
| CVE-2015-8087 | Huawei NE20E-S, NE40E-M, and NE40E-M2 routers with software before V800R007C10SPC100 and NE40E and NE80E routers with software before V800R007C00SPC100 allows remote attackers to send packets to other VPNs and conduct flooding attacks via a crafted MPLS forwarding packet, aka a "VPN routing and forwarding (VRF) hopping vulnerability." |
| CVE-2015-7756 | The encryption implementation in Juniper ScreenOS 6.2.0r15 through 6.2.0r18, 6.3.0r12 before 6.3.0r12b, 6.3.0r13 before 6.3.0r13b, 6.3.0r14 before 6.3.0r14b, 6.3.0r15 before 6.3.0r15b, 6.3.0r16 before 6.3.0r16b, 6.3.0r17 before 6.3.0r17b, 6.3.0r18 before 6.3.0r18b, 6.3.0r19 before 6.3.0r19b, and 6.3.0r20 before 6.3.0r21 makes it easier for remote attackers to discover the plaintext content of VPN sessions by sniffing the network for ciphertext data and conducting an unspecified decryption attack. |
| CVE-2015-7600 | Cisco VPN Client 5.x through 5.0.07.0440 uses weak permissions for vpnclient.ini, which allows local users to gain privileges by entering an arbitrary program name in the Command field of the ApplicationLauncher section. |
| CVE-2015-6510 | Multiple cross-site scripting (XSS) vulnerabilities in pfSense before 2.2.3 allow remote attackers to inject arbitrary web script or HTML via the (1) srctrack, (2) use_mfs_tmp_size, or (3) use_mfs_var_size parameter to system_advanced_misc.php; the (4) port, (5) snaplen, or (6) count parameter to diag_packet_capture.php; the (7) pppoe_resethour, (8) pppoe_resetminute, (9) wpa_group_rekey, or (10) wpa_gmk_rekey parameter to interfaces.php; the (11) pppoe_resethour or (12) pppoe_resetminute parameter to interfaces_ppps_edit.php; the (13) member[] parameter to interfaces_qinq_edit.php; the (14) port or (15) retry parameter to load_balancer_pool_edit.php; the (16) pkgrepourl parameter to pkg_mgr_settings.php; the (17) zone parameter to services_captiveportal.php; the port parameter to (18) services_dnsmasq.php or (19) services_unbound.php; the (20) cache_max_ttl or (21) cache_min_ttl parameter to services_unbound_advanced.php; the (22) sshport parameter to system_advanced_admin.php; the (23) id, (24) tunable, (25) descr, or (26) value parameter to system_advanced_sysctl.php; the (27) firmwareurl, (28) repositoryurl, or (29) branch parameter to system_firmware_settings.php; the (30) pfsyncpeerip, (31) synchronizetoip, (32) username, or (33) passwordfld parameter to system_hasync.php; the (34) maxmss parameter to vpn_ipsec_settings.php; the (35) ntp_server1, (36) ntp_server2, (37) wins_server1, or (38) wins_server2 parameter to vpn_openvpn_csc.php; or unspecified parameters to (39) load_balancer_relay_action.php, (40) load_balancer_relay_action_edit.php, (41) load_balancer_relay_protocol.php, or (42) load_balancer_relay_protocol_edit.php. |
| CVE-2015-6418 | The random-number generator on Cisco Small Business RV routers 4.x and SA500 security appliances 2.2.07 does not have sufficient entropy, which makes it easier for remote attackers to determine a TLS key pair via unspecified computations upon handshake key-exchange data, aka Bug ID CSCus15224. |
| CVE-2015-6327 | The IKEv1 implementation in Cisco Adaptive Security Appliance (ASA) software 7.2 and 8.2 before 8.2(5.58), 8.3 and 8.4 before 8.4(7.29), 8.5 through 8.7 before 8.7(1.17), 9.0 before 9.0(4.37), 9.1 before 9.1(6.8), 9.2 before 9.2(4), and 9.3 before 9.3(3) allows remote attackers to cause a denial of service (device reload) via crafted ISAKMP UDP packets, aka Bug ID CSCus94026. |
| CVE-2015-6305 | Untrusted search path vulnerability in the CMainThread::launchDownloader function in vpndownloader.exe in Cisco AnyConnect Secure Mobility Client 2.0 through 4.1 on Windows allows local users to gain privileges via a Trojan horse DLL in the current working directory, as demonstrated by dbghelp.dll, aka Bug ID CSCuv01279. NOTE: this vulnerability exists because of an incomplete fix for CVE-2015-4211. |
| CVE-2015-5965 | The SSL-VPN feature in Fortinet FortiOS before 4.3.13 only checks the first byte of the TLS MAC in finished messages, which makes it easier for remote attackers to spoof encrypted content via a crafted MAC field. |
| CVE-2015-4203 | Race condition in Cisco IOS 12.2SCH in the Performance Routing Engine (PRE) module on uBR10000 devices, when NetFlow and an MPLS IPv6 VPN are configured, allows remote attackers to cause a denial of service (PXF process crash) by sending malformed MPLS 6VPE packets quickly, aka Bug ID CSCud83396. |
| CVE-2015-4171 | strongSwan 4.3.0 through 5.x before 5.3.2 and strongSwan VPN Client before 1.4.6, when using EAP or pre-shared keys for authenticating an IKEv2 connection, does not enforce server authentication restrictions until the entire authentication process is complete, which allows remote servers to obtain credentials by using a valid certificate and then reading the responses. |
| CVE-2015-3966 | The IPsec SA establishment process on Innominate mGuard devices with firmware 8.x before 8.1.7 allows remote authenticated users to cause a denial of service (VPN service restart) by leveraging a peer relationship to send a crafted configuration with compression. |
| CVE-2015-3005 | Cross-site scripting (XSS) vulnerability in the Dynamic VPN in Juniper Junos 12.1X44 before 12.1X44-D45, 12.1X46 before 12.1X46-D30, 12.1X47 before 12.1X47-D20, and 12.3X48 before 12.3X48-D10 on SRX series devices allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2015-1569 | Fortinet FortiClient 5.2.028 for iOS does not validate certificates, which makes it easier for man-in-the-middle attackers to spoof SSL VPN servers via a crafted certificate. |
| CVE-2015-1109 | NetworkExtension in Apple iOS before 8.3 stores credentials in VPN configuration logs, which makes it easier for physically proximate attackers to obtain sensitive information by reading a log file. |
| CVE-2015-0773 | Cisco FireSIGHT System Software 5.3.1.3 and 6.0.0 allows remote authenticated users to delete an arbitrary user's dashboard via a modified VPN deletion request in a management session, aka Bug ID CSCut67078. |
| CVE-2015-0677 | The XML parser in Cisco Adaptive Security Appliance (ASA) Software 8.4 before 8.4(7.28), 8.6 before 8.6(1.17), 9.0 before 9.0(4.33), 9.1 before 9.1(6), 9.2 before 9.2(3.4), and 9.3 before 9.3(3), when Clientless SSL VPN, AnyConnect SSL VPN, or AnyConnect IKEv2 VPN is used, allows remote attackers to cause a denial of service (VPN outage or device reload) via a crafted XML document, aka Bug ID CSCus95290. |
| CVE-2014-9755 | The hardware VPN client in Viprinet MultichannelVPN Router 300 version 2013070830/2013080900 does not validate the remote VPN endpoint identity (through the checking of the endpoint's SSL key) before initiating the exchange, which allows remote attackers to perform a replay attack. |
| CVE-2014-9754 | The hardware VPN client in Viprinet MultichannelVPN Router 300 version 2013070830/2013080900 does not validate the remote VPN endpoint identity (through the checking of the endpoint's SSL key) before initiating the exchange, which allows an attacker to perform a Man in the Middle attack. |
| CVE-2014-9430 | Cross-site scripting (XSS) vulnerability in httpd/cgi-bin/vpn.cgi/vpnconfig.dat in Smoothwall Express 3.0 SP3 allows remote attackers to inject arbitrary web script or HTML via the COMMENT parameter in an Add action. |
| CVE-2014-9382 | Freebox OS Web interface 3.0.2 has CSRF which can allow VPN user account creation |
| CVE-2014-9104 | Multiple cross-site request forgery (CSRF) vulnerabilities in the XML-RPC API in the Desktop Client in OpenVPN Access Server 1.5.6 and earlier allow remote attackers to hijack the authentication of administrators for requests that (1) disconnecting established VPN sessions, (2) connect to arbitrary VPN servers, or (3) create VPN profiles and execute arbitrary commands via crafted API requests. |
| CVE-2014-8952 | Multiple unspecified vulnerabilities in Check Point Security Gateway R75.40VS, R75.45, R75.46, R75.47, R76, R77, and R77.10, when the (1) IPS blade, (2) IPsec Remote Access, (3) Mobile Access / SSL VPN blade, (4) SSL Network Extender, (5) Identify Awareness blade, (6) HTTPS Inspection, (7) UserCheck, or (8) Data Leak Prevention blade module is enabled, allow remote attackers to cause a denial of service ("stability issue") via an unspecified "traffic condition." |
| CVE-2014-8616 | Multiple cross-site scripting (XSS) vulnerabilities in Fortinet FortiOS 5.2.x before 5.2.3 allow remote attackers to inject arbitrary web script or HTML via unspecified vectors to the (1) user group or (2) vpn template menus. |
| CVE-2014-8104 | OpenVPN 2.x before 2.0.11, 2.1.x, 2.2.x before 2.2.3, and 2.3.x before 2.3.6 allows remote authenticated users to cause a denial of service (server crash) via a small control channel packet. |
| CVE-2014-8012 | Cross-site scripting (XSS) vulnerability in the WebVPN Portal Login page in Cisco Adaptive Security Appliance (ASA) Software allows remote attackers to inject arbitrary web script or HTML via crafted attributes in a cookie, aka Bug ID CSCuh24695. |
| CVE-2014-5928 | The Steganos Online Shield VPN (aka com.steganos.onlineshield) application 1.0.3 for Android does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate. |
| CVE-2014-5801 | The DataGard VPN + AV (aka ocshield.com) application @7F050013 for Android does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate. |
| CVE-2014-3824 | Cross-site scripting (XSS) vulnerability in the web server in the Juniper Junos Pulse Secure Access Service (SSL VPN) devices with IVE OS 8.0 before 8.0r6, 7.4 before 7.4r13, and 7.1 before 7.1r20 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2014-3823 | The Juniper Junos Pulse Secure Access Service (SSL VPN) devices with IVE OS 8.0 before 8.0r1, 7.4 before 7.4r5, and 7.1 before 7.1r18 allows remote attackers to conduct clickjacking attacks via unspecified vectors. |
| CVE-2014-3820 | Cross-site scripting (XSS) vulnerability in the SSL VPN/UAC web server in the Juniper Junos Pulse Secure Access Service (SSL VPN) devices with IVE OS 7.1 before 7.1r16, 7.4 before 7.4r3, and 8.0 before 8.0r1 and the Juniper Junos Pulse Access Control Service devices with UAC OS 4.1 before 4.1r8, 4.4 before 4.4r3 and 5.0 before 5.0r1 allows remote administrators to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2014-3812 | The Juniper Junos Pulse Secure Access Service (SSL VPN) devices with IVE OS before 7.4r5 and 8.x before 8.0r1 and Junos Pulse Access Control Service (UAC) before 4.4r5 and 5.x before 5.0r1 enable cipher suites with weak encryption algorithms, which make it easier for remote attackers to obtain sensitive information by sniffing the network. |
| CVE-2014-3407 | The SSL VPN implementation in Cisco Adaptive Security Appliance (ASA) Software 9.3(.2) and earlier does not properly allocate memory blocks during HTTP packet handling, which allows remote attackers to cause a denial of service (memory consumption) via crafted packets, aka Bug ID CSCuq68888. |
| CVE-2014-3399 | The SSL VPN implementation in Cisco Adaptive Security Appliance (ASA) Software 9.2(.2.4) and earlier does not properly manage session information during creation of a SharePoint handler, which allows remote authenticated users to overwrite arbitrary RAMFS cache files or inject Lua programs, and consequently cause a denial of service (portal outage or system reload), via crafted HTTP requests, aka Bug ID CSCup54208. |
| CVE-2014-3398 | The SSL VPN implementation in Cisco Adaptive Security Appliance (ASA) Software allows remote attackers to obtain potentially sensitive software-version information by reading the verbose response data that is provided for a request to an unspecified URL, aka Bug ID CSCuq65542. |
| CVE-2014-3393 | The Clientless SSL VPN portal customization framework in Cisco ASA Software 8.2 before 8.2(5.51), 8.3 before 8.3(2.42), 8.4 before 8.4(7.23), 8.6 before 8.6(1.14), 9.0 before 9.0(4.24), 9.1 before 9.1(5.12), and 9.2 before 9.2(2.4) does not properly implement authentication, which allows remote attackers to modify RAMFS customization objects via unspecified vectors, as demonstrated by inserting XSS sequences or capturing credentials, aka Bug ID CSCup36829. |
| CVE-2014-3392 | The Clientless SSL VPN portal in Cisco ASA Software 8.2 before 8.2(5.51), 8.3 before 8.3(2.42), 8.4 before 8.4(7.23), 8.6 before 8.6(1.15), 9.0 before 9.0(4.24), 9.1 before 9.1(5.12), 9.2 before 9.2(2.8), and 9.3 before 9.3(1.1) allows remote attackers to obtain sensitive information from process memory or modify memory contents via crafted parameters, aka Bug ID CSCuq29136. |
| CVE-2014-3389 | The VPN implementation in Cisco ASA Software 7.2 before 7.2(5.15), 8.2 before 8.2(5.51), 8.3 before 8.3(2.42), 8.4 before 8.4(7.23), 8.6 before 8.6(1.15), 9.0 before 9.0(4.24), 9.1 before 9.1(5.12), 9.2 before 9.2(2.6), and 9.3 before 9.3(1.1) does not properly implement a tunnel filter, which allows remote authenticated users to obtain failover-unit access via crafted packets, aka Bug ID CSCuq28582. |
| CVE-2014-3383 | The IKE implementation in the VPN component in Cisco ASA Software 9.1 before 9.1(5.1) allows remote attackers to cause a denial of service (device reload) via crafted UDP packets, aka Bug ID CSCul36176. |
| CVE-2014-2292 | Unspecified vulnerability in the Linux Network Connect client in Juniper Junos Pulse Secure Access Service (aka SSL VPN) with IVE OS before 7.1r18, 7.3 before 7.3r10, 7.4 before 7.4r8, and 8.0 before 8.0r1 allows local users to gain privileges via unspecified vectors. |
| CVE-2014-2291 | Cross-site scripting (XSS) vulnerability in the Pulse Collaboration (Secure Meeting) user pages in Juniper Junos Pulse Secure Access Service (aka SSL VPN) with IVE OS before 7.1r18, 7.3 before 7.3r10, 7.4 before 7.4r8, and 8.0 before 8.0r1 allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2014-2264 | The OpenVPN module in Synology DiskStation Manager (DSM) 4.3-3810 update 1 has a hardcoded root password of synopass, which makes it easier for remote attackers to obtain access via a VPN session. |
| CVE-2014-2151 | The WebVPN portal in Cisco Adaptive Security Appliance (ASA) Software 8.4(.7.15) and earlier allows remote authenticated users to obtain sensitive information via a crafted JavaScript file, aka Bug ID CSCui04520. |
| CVE-2014-2128 | The SSL VPN implementation in Cisco Adaptive Security Appliance (ASA) Software 8.2 before 8.2(5.47, 8.3 before 8.3(2.40), 8.4 before 8.4(7.3), 8.6 before 8.6(1.13), 9.0 before 9.0(3.8), and 9.1 before 9.1(3.2) allows remote attackers to bypass authentication via (1) a crafted cookie value within modified HTTP POST data or (2) a crafted URL, aka Bug ID CSCua85555. |
| CVE-2014-2127 | Cisco Adaptive Security Appliance (ASA) Software 8.x before 8.2(5.48), 8.3 before 8.3(2.40), 8.4 before 8.4(7.9), 8.6 before 8.6(1.13), 9.0 before 9.0(4.1), and 9.1 before 9.1(4.3) does not properly process management-session information during privilege validation for SSL VPN portal connections, which allows remote authenticated users to gain privileges by establishing a Clientless SSL VPN session and entering crafted URLs, aka Bug ID CSCul70099. |
| CVE-2014-2112 | The SSL VPN (aka WebVPN) feature in Cisco IOS 15.1 through 15.4 allows remote attackers to cause a denial of service (memory consumption) via crafted HTTP requests, aka Bug ID CSCuf51357. |
| CVE-2014-2045 | Multiple cross-site scripting (XSS) vulnerabilities in the old and new interfaces in Viprinet Multichannel VPN Router 300 allow remote attackers to inject arbitrary web script or HTML via the username when (1) logging in or (2) creating an account in the old interface, (3) username when creating an account in the new interface, (4) hostname in the old interface, (5) inspect parameter in the config module, (6) commands parameter in the atcommands tool, or (7) host parameter in the ping tool. |
| CVE-2014-0612 | Unspecified vulnerability in Juniper Junos before 11.4R10-S1, before 11.4R11, 12.1X44 before 12.1X44-D26, 12.1X44 before 12.1X44-D30, 12.1X45 before 12.1X45-D20, and 12.1X46 before 12.1X46-D10, when Dynamic IPsec VPN is configured, allows remote attackers to cause a denial of service (new Dynamic VPN connection failures and CPU and disk consumption) via unknown vectors. |
| CVE-2013-7098 | OpenConnect VPN client with GnuTLS before 5.02 contains a heap overflow if MTU is increased on reconnection. |
| CVE-2013-6956 | Cross-site scripting (XSS) vulnerability in the Secure Access Service Web rewriting feature in Juniper Junos Pulse Secure Access Service (aka SSL VPN) with IVE OS before 7.1r17, 7.3 before 7.3r8, 7.4 before 7.4r6, and 8.0 before 8.0r1, when web rewrite is enabled, allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2013-6686 | The SSL VPN implementation in Cisco IOS 15.3(1)T2 and earlier allows remote authenticated users to cause a denial of service (interface queue wedge) via crafted DTLS packets in an SSL session, aka Bug IDs CSCuh97409 and CSCud90568. |
| CVE-2013-6218 | Unspecified vulnerability in HP Network Node Manager i (NNMi) 9.0x, 9.1x, and 9.2x allows remote attackers to execute arbitrary code via unknown vectors. |
| CVE-2013-6170 | Juniper Junos 10.0 before 10.0S28, 10.4 before 10.4R7, 11.1 before 11.1R5, 11.2 before 11.2R2, and 11.4 before 11.4R1, when in a Next-Generation Multicast VPN (NGEN MVPN) environment, allows remote attackers to cause a denial of service (RPD routing daemon crash) via a large number of crafted PIM (S,G) join requests. |
| CVE-2013-5649 | Multiple cross-site scripting (XSS) vulnerabilities in Juniper Junos Pulse Secure Access Service (aka SSL VPN) with IVE OS 7.1 before 7.1r15, 7.2 before 7.2r11, 7.3 before 7.3r6, and 7.4 before 7.4r3 allow (1) remote attackers to inject arbitrary web script or HTML via vectors involving login pages, and allow (2) remote authenticated users to inject arbitrary web script or HTML via vectors involving a support page. |
| CVE-2013-5559 | Buffer overflow in the Active Template Library (ATL) framework in the VPNAPI COM module in Cisco AnyConnect Secure Mobility Client 2.x allows user-assisted remote attackers to execute arbitrary code via a crafted HTML document, aka Bug ID CSCuj58139. |
| CVE-2013-5551 | Cisco Adaptive Security Appliance (ASA) Software, when certain same-security-traffic and management-access options are enabled, allows remote authenticated users to cause a denial of service (stack overflow and device reload) by using the clientless SSL VPN portal for internal-resource browsing, aka Bug ID CSCui51199. |
| CVE-2013-5544 | The VPN authentication functionality in Cisco Adaptive Security Appliance (ASA) Software allows remote attackers to cause a denial of service (device reload) by sending many username-from-cert IKE requests, aka Bug ID CSCua91108. |
| CVE-2013-5515 | The Clientless SSL VPN feature in Cisco Adaptive Security Appliance (ASA) Software 8.x before 8.2(5.44), 8.3.x before 8.3(2.39), 8.4.x before 8.4(5.7), 8.6.x before 8.6(1.12), 9.0.x before 9.0(2.6), and 9.1.x before 9.1(1.7) allows remote attackers to cause a denial of service (device reload) via crafted HTTPS requests, aka Bug ID CSCua22709. |
| CVE-2013-5510 | The remote-access VPN implementation in Cisco Adaptive Security Appliance (ASA) Software 7.x before 7.2(5.12), 8.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.6.x before 8.6(1.12), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.5), when an override-account-disable option is enabled, does not properly parse AAA LDAP responses, which allows remote attackers to bypass authentication via a VPN connection attempt, aka Bug ID CSCug83401. |
| CVE-2013-5509 | The SSL implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0 before 9.0(2.6) and 9.1 before 9.1(2) allows remote attackers to bypass authentication, and obtain VPN access or administrative access, via a crafted X.509 client certificate, aka Bug ID CSCuf52468. |
| CVE-2013-5507 | The IPsec implementation in Cisco Adaptive Security Appliance (ASA) Software 9.1 before 9.1(1.7), when an IPsec VPN tunnel is enabled, allows remote attackers to cause a denial of service (device reload) via a (1) ICMP or (2) ICMPv6 packet that is improperly handled during decryption, aka Bug ID CSCue18975. |
| CVE-2013-4840 | Unspecified vulnerability in HP and H3C VPN Firewall Module products SECPATH1000FE before 5.20.R3177 and SECBLADEFW before 5.20.R3177 allows remote attackers to cause a denial of service via unknown vectors. |
| CVE-2013-4669 | FortiClient before 4.3.5.472 on Windows, before 4.0.3.134 on Mac OS X, and before 4.0 on Android; FortiClient Lite before 4.3.4.461 on Windows; FortiClient Lite 2.0 through 2.0.0223 on Android; and FortiClient SSL VPN before 4.0.2258 on Linux proceed with an SSL session after determining that the server's X.509 certificate is invalid, which allows man-in-the-middle attackers to obtain sensitive information by leveraging a password transmission that occurs before the user warning about the certificate problem. |
| CVE-2013-3970 | Juniper Junos Pulse Secure Access Service (aka SSL VPN) with IVE OS 7.0r2 through 7.0r8 and 7.1r1 through 7.1r5 and Junos Pulse Access Control Service (aka UAC) with UAC OS 4.1r1 through 4.1r5 include a test Certification Authority (CA) certificate in the Trusted Server CAs list, which makes it easier for man-in-the-middle attackers to spoof SSL servers by leveraging control over that test CA. |
| CVE-2013-3436 | The default configuration of the Group Encrypted Transport VPN (GET VPN) feature on Cisco IOS uses an improper mechanism for enabling Group Domain of Interpretation (GDOI) traffic flow, which allows remote attackers to bypass the encryption policy via certain uses of UDP port 848, aka Bug ID CSCui07698. |
| CVE-2013-3415 | Cisco Adaptive Security Appliance (ASA) Software 8.4.x before 8.4(3) and 8.6.x before 8.6(1.3) does not properly manage memory upon an AnyConnect SSL VPN client disconnection, which allows remote attackers to cause a denial of service (memory consumption, and forwarding outage or system hang) via packets to the disconnected machine's IP address, aka Bug ID CSCtt36737. |
| CVE-2013-2692 | Cross-site request forgery (CSRF) vulnerability in the Admin web interface in OpenVPN Access Server before 1.8.5 allows remote attackers to hijack the authentication of administrators for requests that create administrative users. |
| CVE-2013-2061 | The openvpn_decrypt function in crypto.c in OpenVPN 2.3.0 and earlier, when running in UDP mode, allows remote attackers to obtain sensitive information via a timing attack involving an HMAC comparison function that does not run in constant time and a padding oracle attack on the CBC mode cipher. |
| CVE-2013-1215 | The vpnclient program in the Easy VPN component on Cisco Adaptive Security Appliances (ASA) 5505 devices allows local users to gain privileges via unspecified vectors, aka Bug ID CSCuf85295. |
| CVE-2013-1199 | Race condition in the CIFS implementation in the rewriter module in the Clientless SSL VPN component on Cisco Adaptive Security Appliances (ASA) devices allows remote authenticated users to cause a denial of service (device reload) by accessing resources within multiple sessions, aka Bug ID CSCub58996. |
| CVE-2013-1194 | The ISAKMP implementation on Cisco Adaptive Security Appliances (ASA) devices generates different responses for IKE aggressive-mode messages depending on whether invalid VPN groups are specified, which allows remote attackers to enumerate groups via a series of messages, aka Bug ID CSCue73708. |
| CVE-2013-1173 | Heap-based buffer overflow in ciscod.exe in the Cisco Security Service in Cisco AnyConnect Secure Mobility Client (aka AnyConnect VPN Client) allows local users to gain privileges via unspecified vectors, aka Bug ID CSCud14143. |
| CVE-2013-1172 | The Cisco Security Service in Cisco AnyConnect Secure Mobility Client (aka AnyConnect VPN Client) does not properly verify files, which allows local users to gain privileges via unspecified vectors, aka Bug ID CSCud14153. |
| CVE-2013-1136 | The crypto engine process in Cisco IOS on Aggregation Services Router (ASR) Route Processor 2 does not properly manage memory, which allows local users to cause a denial of service (route processor crash) by creating multiple tunnels and then examining encryption statistics, aka Bug ID CSCuc52193. |
| CVE-2012-6128 | Multiple stack-based buffer overflows in http.c in OpenConnect before 4.08 allow remote VPN gateways to cause a denial of service (application crash) via a long (1) hostname, (2) path, or (3) cookie list in a response. |
| CVE-2012-5429 | The VPN driver in Cisco VPN Client on Windows does not properly interact with the kernel, which allows local users to cause a denial of service (kernel fault and system crash) via a crafted application, aka Bug ID CSCuc81669. |
| CVE-2012-5032 | The Flex-VPN load-balancing feature in the ipsec-ikev2 implementation in Cisco IOS before 15.1(1)SY3 does not require authentication, which allows remote attackers to trigger the forwarding of VPN traffic to an attacker-controlled destination, or the discarding of this traffic, by arranging for an arbitrary device to become a cluster member, aka Bug ID CSCub93641. |
| CVE-2012-5017 | Cisco IOS before 15.1(1)SY1 allows remote authenticated users to cause a denial of service (device reload) by establishing a VPN session and then sending malformed IKEv2 packets, aka Bug ID CSCub39268. |
| CVE-2012-4739 | Multiple cross-site scripting (XSS) vulnerabilities in Barracuda SSL VPN before 2.2.2.203 (2012-07-05) allow remote attackers to inject arbitrary web script or HTML via the (1) policyLaunching, (2) resourcePrefix, or (3) actionPath parameter in showUserResourceCategories.do; (4) list or (5) path parameter to fileSystem.do; or (6) return-To parameter to launchAgent.do. |
| CVE-2012-4659 | The AAA functionality in the IPv4 SSL VPN implementations on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.2 before 8.2(5.30) and 8.3 before 8.3(2.34) allows remote attackers to cause a denial of service (device reload) via a crafted authentication response, aka Bug ID CSCtz04566. |
| CVE-2012-4043 | Cross-site scripting (XSS) vulnerability in global-protect/login.esp in Palo Alto Networks Global Protect Portal, Global Protect Gateway, and SSL VPN portals 3.1.x through 3.1.11 and 4.0.x through 4.0.5 allows remote attackers to inject arbitrary web script or HTML via the inputStr parameter in a Login action. |
| CVE-2012-3924 | The SSLVPN implementation in Cisco IOS 15.1 and 15.2, when DTLS is enabled, does not properly handle certain outbound ACL configurations, which allows remote authenticated users to cause a denial of service (device crash) via a session involving a PPP over ATM (PPPoA) interface, aka Bug ID CSCty97961. |
| CVE-2012-3923 | The SSLVPN implementation in Cisco IOS 12.4, 15.0, 15.1, and 15.2, when DTLS is not enabled, does not properly handle certain outbound ACL configurations, which allows remote authenticated users to cause a denial of service (device crash) via a session involving a PPP over ATM (PPPoA) interface, aka Bug ID CSCte41827. |
| CVE-2012-3895 | Cisco IOS 15.0 through 15.3 allows remote authenticated users to cause a denial of service (device crash) via an MVPNv6 update, aka Bug ID CSCty89224. |
| CVE-2012-3094 | The VPN downloader in the download_install component in Cisco AnyConnect Secure Mobility Client 3.1.x before 3.1.00495 on Linux accepts arbitrary X.509 server certificates without user interaction, which allows remote attackers to obtain sensitive information via vectors involving an invalid certificate, aka Bug ID CSCua11967. |
| CVE-2012-3052 | Untrusted search path vulnerability in Cisco VPN Client 5.0 allows local users to gain privileges via a Trojan horse DLL in the current working directory, aka Bug ID CSCua28747. |
| CVE-2012-2753 | Untrusted search path vulnerability in TrGUI.exe in the Endpoint Connect (aka EPC) GUI in Check Point Endpoint Security R73.x and E80.x on the VPN blade platform, Endpoint Security VPN R75, Endpoint Connect R73.x, and Remote Access Clients E75.x allows local users to gain privileges via a Trojan horse DLL in the current working directory. |
| CVE-2012-2496 | A certain Java applet in the VPN downloader implementation in the WebLaunch feature in Cisco AnyConnect Secure Mobility Client 3.x before 3.0 MR7 on 64-bit Linux platforms does not properly restrict use of Java components, which allows remote attackers to execute arbitrary code via a crafted web site, aka Bug ID CSCty45925. |
| CVE-2012-2494 | The VPN downloader implementation in the WebLaunch feature in Cisco AnyConnect Secure Mobility Client 2.x before 2.5 MR6 and 3.x before 3.0 MR8 does not compare the timestamp of offered software to the timestamp of installed software, which allows remote attackers to force a version downgrade by using (1) ActiveX or (2) Java components to offer signed code that corresponds to an older software release, aka Bug ID CSCtw48681. |
| CVE-2012-2493 | The VPN downloader implementation in the WebLaunch feature in Cisco AnyConnect Secure Mobility Client 2.x before 2.5 MR6 on Windows, and 2.x before 2.5 MR6 and 3.x before 3.0 MR8 on Mac OS X and Linux, does not properly validate binaries that are received by the downloader process, which allows remote attackers to execute arbitrary code via vectors involving (1) ActiveX or (2) Java components, aka Bug ID CSCtw47523. |
| CVE-2012-2474 | Memory leak on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2 through 8.4 allows remote authenticated users to cause a denial of service (memory consumption and blank response page) by using the clientless WebVPN feature, aka Bug ID CSCth34278. |
| CVE-2012-2053 | The sudoers file in the Linux system configuration in F5 FirePass 6.0.0 through 6.1.0 and 7.0.0 does not require a password for executing commands as root, which allows local users to gain privileges via the sudo program, as demonstrated by the user account that executes PHP scripts, a different vulnerability than CVE-2012-1777. |
| CVE-2012-1777 | SQL injection vulnerability in my.activation.php3 in F5 FirePass 6.0.0 through 6.1.0 and 7.0.0 allows remote attackers to execute arbitrary SQL commands via the state parameter. |
| CVE-2012-1370 | Cisco AnyConnect Secure Mobility Client 3.0 before 3.0.08057 allows remote authenticated users to cause a denial of service (vpnagentd process crash) via a crafted packet, aka Bug ID CSCty01670. |
| CVE-2012-1344 | Cisco IOS 15.1 and 15.2, when a clientless SSL VPN is configured, allows remote authenticated users to cause a denial of service (device reload) by using a web browser to refresh the SSL VPN portal page, as demonstrated by the Android browser, aka Bug ID CSCtr86328. |
| CVE-2012-0646 | Format string vulnerability in VPN in Apple iOS before 5.1 allows remote attackers to execute arbitrary code via a crafted racoon configuration file. |
| CVE-2012-0358 | Buffer overflow in the Cisco Port Forwarder ActiveX control in cscopf.ocx, as distributed through the Clientless VPN feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.0 through 7.2 before 7.2(5.6), 8.0 before 8.0(5.26), 8.1 before 8.1(2.53), 8.2 before 8.2(5.18), 8.3 before 8.3(2.28), 8.2 before 8.4(2.16), and 8.6 before 8.6(1.1), allows remote attackers to execute arbitrary code via unspecified vectors, aka Bug ID CSCtr00165. |
| CVE-2011-4667 | The encryption library in Cisco IOS Software 15.2(1)T, 15.2(1)T1, and 15.2(2)T, Cisco NX-OS in Cisco MDS 9222i Multiservice Modular Switch, Cisco MDS 9000 18/4-Port Multiservice Module, and Cisco MDS 9000 Storage Services Node module before 5.2(6), and Cisco IOS in Cisco VPN Services Port Adaptor for Catalyst 6500 12.2(33)SXI, and 12.2(33)SXJ when IP Security (aka IPSec) is used, allows remote attackers to obtain unencrypted packets from encrypted sessions. |
| CVE-2011-3309 | Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2 through 8.4 process IKE requests despite a vpnclient mode configuration, which allows remote attackers to obtain potentially sensitive information by reading IKE responder traffic, aka Bug ID CSCtt07749. |
| CVE-2011-2678 | The Cisco VPN Client 5.0.7.0240 and 5.0.7.0290 on 64-bit Windows platforms uses weak permissions (NT AUTHORITY\INTERACTIVE:F) for cvpnd.exe, which allows local users to gain privileges by replacing this executable file with an arbitrary program, aka Bug ID CSCtn50645. NOTE: this vulnerability exists because of a CVE-2007-4415 regression. |
| CVE-2011-2054 | A vulnerability in the Cisco ASA that could allow a remote attacker to successfully authenticate using the Cisco AnyConnect VPN client if the Secondary Authentication type is LDAP and the password is left blank, providing the primary credentials are correct. The vulnerabilities is due to improper input validation of certain parameters passed to the affected software. An attacker must have the correct primary credentials in order to successfully exploit this vulnerability. |
| CVE-2011-2041 | The Start Before Logon (SBL) functionality in Cisco AnyConnect Secure Mobility Client (formerly AnyConnect VPN Client) before 2.3.254 on Windows, and on Windows Mobile, allows local users to gain privileges via unspecified user-interface interaction, aka Bug ID CSCta40556. |
| CVE-2011-2040 | The helper application in Cisco AnyConnect Secure Mobility Client (formerly AnyConnect VPN Client) before 2.5.3041, and 3.0.x before 3.0.629, on Linux and Mac OS X downloads a client executable file (vpndownloader.exe) without verifying its authenticity, which allows remote attackers to execute arbitrary code via the url property to a Java applet, aka Bug ID CSCsy05934. |
| CVE-2011-2039 | The helper application in Cisco AnyConnect Secure Mobility Client (formerly AnyConnect VPN Client) before 2.3.185 on Windows, and on Windows Mobile, downloads a client executable file (vpndownloader.exe) without verifying its authenticity, which allows remote attackers to execute arbitrary code via the url property to a certain ActiveX control in vpnweb.ocx, aka Bug ID CSCsy00904. |
| CVE-2011-1827 | Multiple unspecified vulnerabilities in Check Point SSL Network Extender (SNX), SecureWorkSpace, and Endpoint Security On-Demand, as distributed by SecurePlatform, IPSO6, Connectra, and VSX, allow remote attackers to execute arbitrary code via vectors involving a (1) ActiveX control or (2) Java applet. |
| CVE-2010-4593 | The Connection Manager in IBM Lotus Mobile Connect before 6.1.4 does not properly maintain a certain reference count, which allows remote authenticated users to cause a denial of service (IP address exhaustion) by making invalid attempts to establish sessions with the same VPN ID from multiple devices. |
| CVE-2010-4354 | The remote-access IPSec VPN implementation on Cisco Adaptive Security Appliances (ASA) 5500 series devices, PIX Security Appliances 500 series devices, and VPN Concentrators 3000 series devices responds to an Aggressive Mode IKE Phase I message only when the group name is configured on the device, which allows remote attackers to enumerate valid group names via a series of IKE negotiation attempts, aka Bug ID CSCtj96108, a different vulnerability than CVE-2005-2025. |
| CVE-2010-3903 | Unspecified vulnerability in OpenConnect before 2.23 allows remote AnyConnect SSL VPN servers to cause a denial of service (application crash) via a 404 HTTP status code. |
| CVE-2010-3901 | OpenConnect before 2.25 does not properly validate X.509 certificates, which allows man-in-the-middle attackers to spoof arbitrary AnyConnect SSL VPN servers via a crafted server certificate that (1) does not correspond to the server hostname or (2) is presented in circumstances involving a missing --cafile configuration option. |
| CVE-2010-3010 | Cross-site scripting (XSS) vulnerability on the HP 3Com OfficeConnect Gigabit VPN Firewall 3CREVF100-73 with firmware before 1.0.13 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. NOTE: a separate XSS issue for HP System Management Homepage (SMH) was originally assigned CVE-2010-3010 due to a CNA error, but CVE-2010-3012 is the appropriate identifier for the SMH issue. |
| CVE-2010-2836 | Memory leak in the SSL VPN feature in Cisco IOS 12.4, 15.0, and 15.1, when HTTP port redirection is enabled, allows remote attackers to cause a denial of service (memory consumption) by improperly disconnecting SSL sessions, leading to connections that remain in the CLOSE-WAIT state, aka Bug ID CSCtg21685. |
| CVE-2010-2583 | Stack-based buffer overflow in SonicWALL SSL-VPN End-Point Interrogator/Installer ActiveX control (Aventail.EPInstaller) before 10.5.2 and 10.0.5 hotfix 3 allows remote attackers to execute arbitrary code via long (1) CabURL and (2) Location arguments to the Install3rdPartyComponent method. |
| CVE-2010-0703 | Cross-site scripting (XSS) vulnerability in wa/auth in PortWise SSL VPN 4.6 allows remote attackers to inject arbitrary web script or HTML via the reloadFrame parameter. |
| CVE-2010-0565 | Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.2 before 7.2(4.45), 8.0 before 8.0(4.44), 8.1 before 8.1(2.35), and 8.2 before 8.2(1.10), allows remote attackers to cause a denial of service (page fault and device reload) via a malformed DTLS message, aka Bug ID CSCtb64913 and "WebVPN DTLS Denial of Service Vulnerability." |
| CVE-2010-0392 | Stack-based buffer overflow in vpnconf.exe in TheGreenBow IPSec VPN Client 4.51.001, 4.65.003, and possibly other versions, allows user-assisted remote attackers to execute arbitrary code via a long OpenScriptAfterUp parameter in a policy (.tgb) file, related to "phase 2." |
| CVE-2009-5009 | Double free vulnerability in OpenConnect before 1.40 might allow remote AnyConnect SSL VPN servers to cause a denial of service (application crash) or possibly have unspecified other impact via a crafted DTLS Cipher option during a reconnect operation. |
| CVE-2009-5008 | Cisco Secure Desktop (CSD), when used in conjunction with an AnyConnect SSL VPN server, does not properly perform verification, which allows local users to bypass intended policy restrictions via a modified executable file. |
| CVE-2009-5007 | The Cisco trial client on Linux for Cisco AnyConnect SSL VPN allows local users to overwrite arbitrary files via a symlink attack on unspecified temporary files. |
| CVE-2009-4911 | Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allows remote attackers to cause a denial of service (device crash) via vectors involving SSL VPN and PPPoE transactions, aka Bug ID CSCsm77958. |
| CVE-2009-4455 | The default configuration of Cisco ASA 5500 Series Adaptive Security Appliance (Cisco ASA) 7.0, 7.1, 7.2, 8.0, 8.1, and 8.2 allows portal traffic to access arbitrary backend servers, which might allow remote authenticated users to bypass intended access restrictions and access unauthorized web sites via a crafted URL obfuscated with ROT13 and a certain encoding. NOTE: this issue was originally reported as a vulnerability related to lack of restrictions to URLs listed in the Cisco WebVPN bookmark component, but the vendor states that "The bookmark feature is not a security feature." |
| CVE-2009-4118 | The StartServiceCtrlDispatcher function in the cvpnd service (cvpnd.exe) in Cisco VPN client for Windows before 5.0.06.0100 does not properly handle an ERROR_FAILED_SERVICE_CONTROLLER_CONNECT error, which allows local users to cause a denial of service (service crash and VPN connection loss) via a manual start of cvpnd.exe while the cvpnd service is running. |
| CVE-2009-2918 | The tgbvpn.sys driver in TheGreenBow IPSec VPN Client 4.61.003 allows local users to cause a denial of service (NULL pointer dereference and system crash) via a crafted request to the 0x80000034 IOCTL, probably involving an input or output buffer size of 0. |
| CVE-2009-2871 | Unspecified vulnerability in Cisco IOS 12.2 and 12.4, when SSLVPN sessions, SSH sessions, or IKE encrypted nonces are enabled, allows remote attackers to cause a denial of service (device reload) via a crafted encrypted packet, aka Bug ID CSCsq24002. |
| CVE-2009-2631 | Multiple clientless SSL VPN products that run in web browsers, including Stonesoft StoneGate; Cisco ASA; SonicWALL E-Class SSL VPN and SonicWALL SSL VPN; SafeNet SecureWire Access Gateway; Juniper Networks Secure Access; Nortel CallPilot; Citrix Access Gateway; and other products, when running in configurations that do not restrict access to the same domain as the VPN, retrieve the content of remote URLs from one domain and rewrite them so they originate from the VPN's domain, which violates the same origin policy and allows remote attackers to conduct cross-site scripting attacks, read cookies that originated from other domains, access the Web VPN session to gain access to internal resources, perform key logging, and conduct other attacks. NOTE: it could be argued that this is a fundamental design problem in any clientless VPN solution, as opposed to a commonly-introduced error that can be fixed in separate implementations. Therefore a single CVE has been assigned for all products that have this design. |
| CVE-2009-2119 | Cross-site scripting (XSS) vulnerability in the login interface (my.logon.php3) in F5 FirePass SSL VPN 5.5 through 5.5.2 and 6.0 through 6.0.3 allows remote attackers to inject arbitrary web script or HTML via a base64-encoded xcho parameter. |
| CVE-2009-1262 | Format string vulnerability in Fortinet FortiClient 3.0.614, and possibly earlier, allows local users to execute arbitrary code via format string specifiers in the VPN connection name. |
| CVE-2009-1227 | ** DISPUTED ** NOTE: this issue has been disputed by the vendor. Buffer overflow in the PKI Web Service in Check Point Firewall-1 PKI Web Service allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a long (1) Authorization or (2) Referer HTTP header to TCP port 18624. NOTE: the vendor has disputed this issue, stating "Check Point Security Alert Team has analyzed this report. We've tried to reproduce the attack on all VPN-1 versions from NG FP2 and above with and without HFAs. The issue was not reproduced. We have conducted a thorough analysis of the relevant code and verified that we are secure against this attack. We consider this attack to pose no risk to Check Point customers." In addition, the original researcher, whose reliability is unknown as of 20090407, also states that the issue "was discovered during a pen-test where the client would not allow further analysis." |
| CVE-2009-1220 | Cross-site scripting (XSS) vulnerability in +webvpn+/index.html in WebVPN on the Cisco Adaptive Security Appliances (ASA) 5520 with software 7.2(4)30 and earlier 7.2 versions including 7.2(2)22, and 8.0(4)28 and earlier 8.0 versions, when clientless mode is enabled, allows remote attackers to inject arbitrary web script or HTML via the Host HTTP header. |
| CVE-2009-1203 | WebVPN on the Cisco Adaptive Security Appliances (ASA) device with software 8.0(4), 8.1.2, and 8.2.1 does not properly distinguish its own login screen from the login screens it produces for third-party (1) FTP and (2) CIFS servers, which makes it easier for remote attackers to trick a user into sending WebVPN credentials to an arbitrary server via a URL associated with that server, aka Bug ID CSCsy80709. |
| CVE-2009-1202 | WebVPN on the Cisco Adaptive Security Appliances (ASA) device with software 8.0(4), 8.1.2, and 8.2.1 allows remote attackers to bypass certain protection mechanisms involving URL rewriting and HTML rewriting, and conduct cross-site scripting (XSS) attacks, by modifying the first hex-encoded character in a /+CSCO+ URI, aka Bug ID CSCsy80705. |
| CVE-2009-1201 | Eval injection vulnerability in the csco_wrap_js function in /+CSCOL+/cte.js in WebVPN on the Cisco Adaptive Security Appliances (ASA) device with software 8.0(4), 8.1.2, and 8.2.1 allows remote attackers to bypass a DOM wrapper and conduct cross-site scripting (XSS) attacks by setting CSCO_WebVPN['process'] to the name of a crafted function, aka Bug ID CSCsy80694. |
| CVE-2009-1156 | Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 Series devices 8.0 before 8.0(4)25 and 8.1 before 8.1(2)15, when an SSL VPN or ASDM access is configured, allows remote attackers to cause a denial of service (device reload) via a crafted (1) SSL or (2) HTTP packet. |
| CVE-2009-1155 | Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 7.1(1) through 7.1(2)82, 7.2 before 7.2(4)27, 8.0 before 8.0(4)25, and 8.1 before 8.1(2)15, when AAA override-account-disable is entered in a general-attributes field, allow remote attackers to bypass authentication and establish a VPN session to an ASA device via unspecified vectors. |
| CVE-2009-0680 | cgi-bin/welcome/VPN_only in the web interface in Netgear SSL312 allows remote attackers to cause a denial of service (device crash) via a crafted query string, as demonstrated using directory traversal sequences. |
| CVE-2009-0635 | Memory leak in the Cisco Tunneling Control Protocol (cTCP) encapsulation feature in Cisco IOS 12.4, when an Easy VPN (aka EZVPN) server is enabled, allows remote attackers to cause a denial of service (memory consumption and device crash) via a sequence of TCP packets. |
| CVE-2009-0628 | Memory leak in the SSLVPN feature in Cisco IOS 12.3 through 12.4 allows remote attackers to cause a denial of service (memory consumption and device crash) by disconnecting an SSL session in an abnormal manner, leading to a Transmission Control Block (TCB) leak. |
| CVE-2009-0626 | The SSLVPN feature in Cisco IOS 12.3 through 12.4 allows remote attackers to cause a denial of service (device reload or hang) via a crafted HTTPS packet. |
| CVE-2008-5849 | Check Point VPN-1 R55, R65, and other versions, when Port Address Translation (PAT) is used, allows remote attackers to discover intranet IP addresses via a packet with a small TTL, which triggers an ICMP_TIMXCEED_INTRANS (aka ICMP time exceeded in-transit) response containing an encapsulated IP packet with an intranet address, as demonstrated by a TCP packet to the firewall management server on port 18264. |
| CVE-2008-5121 | dne2000.sys in Citrix Deterministic Network Enhancer (DNE) 2.21.7.233 through 3.21.7.17464, as used in (1) Cisco VPN Client, (2) Blue Coat WinProxy, and (3) SafeNet SoftRemote and HighAssurance Remote, allows local users to gain privileges via a crafted DNE_IOCTL DeviceIoControl request to the \\.\DNE device interface. |
| CVE-2008-4227 | Apple iPhone OS 1.0 through 2.1 and iPhone OS for iPod touch 1.1 through 2.1 changes the encryption level of PPTP VPN connections to a lower level than was previously used, which makes it easier for remote attackers to obtain sensitive information or hijack a connection by decrypting network traffic. |
| CVE-2008-3815 | Unspecified vulnerability in Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 7.0 before 7.0(8)3, 7.1 before 7.1(2)78, 7.2 before 7.2(4)16, 8.0 before 8.0(4)6, and 8.1 before 8.1(1)13, when configured as a VPN using Microsoft Windows NT Domain authentication, allows remote attackers to bypass VPN authentication via unknown vectors. |
| CVE-2008-3803 | A "logic error" in Cisco IOS 12.0 through 12.4, when a Multiprotocol Label Switching (MPLS) VPN with extended communities is configured, sometimes causes a corrupted route target (RT) to be used, which allows remote attackers to read traffic from other VPNs in opportunistic circumstances. |
| CVE-2008-3459 | Unspecified vulnerability in OpenVPN 2.1-beta14 through 2.1-rc8, when running on non-Windows systems, allows remote servers to execute arbitrary commands via crafted (1) lladdr and (2) iproute configuration directives, probably related to shell metacharacters. |
| CVE-2008-2736 | Unspecified vulnerability in Cisco Adaptive Security Appliance (ASA) 5500 devices 8.0(3)15, 8.0(3)16, 8.1(1)4, and 8.1(1)5, when configured as a clientless SSL VPN endpoint, allows remote attackers to obtain usernames and passwords via unknown vectors, aka Bug ID CSCsq45636. |
| CVE-2008-2735 | The HTTP server in Cisco Adaptive Security Appliance (ASA) 5500 devices 8.0 before 8.0(3)15 and 8.1 before 8.1(1)5, when configured as a clientless SSL VPN endpoint, does not properly process URIs, which allows remote attackers to cause a denial of service (device reload) via a URI in a crafted SSL or HTTP packet, aka Bug ID CSCsq19369. |
| CVE-2008-2734 | Memory leak in the crypto functionality in Cisco Adaptive Security Appliance (ASA) 5500 devices 7.2 before 7.2(4)2, 8.0 before 8.0(3)14, and 8.1 before 8.1(1)4, when configured as a clientless SSL VPN endpoint, allows remote attackers to cause a denial of service (memory consumption and VPN hang) via a crafted SSL or HTTP packet, aka Bug ID CSCso66472. |
| CVE-2008-2733 | Cisco PIX and Adaptive Security Appliance (ASA) 5500 devices 7.2 before 7.2(4)2, 8.0 before 8.0(3)14, and 8.1 before 8.1(1)4, when configured as a client VPN endpoint, do not properly process IPSec client authentication, which allows remote attackers to cause a denial of service (device reload) via a crafted authentication attempt, aka Bug ID CSCso69942. |
| CVE-2008-2732 | Multiple unspecified vulnerabilities in the SIP inspection functionality in Cisco PIX and Adaptive Security Appliance (ASA) 5500 devices 7.0 before 7.0(7)16, 7.1 before 7.1(2)71, 7.2 before 7.2(4)7, 8.0 before 8.0(3)20, and 8.1 before 8.1(1)8 allow remote attackers to cause a denial of service (device reload) via unknown vectors, aka Bug IDs CSCsq07867, CSCsq57091, CSCsk60581, and CSCsq39315. |
| CVE-2008-2637 | Multiple cross-site scripting (XSS) vulnerabilities in F5 FirePass SSL VPN 6.0.2 hotfix 3, and possibly earlier versions, allow remote attackers to inject arbitrary web script or HTML via quotes in (1) the css_exceptions parameter in vdesk/admincon/webyfiers.php and (2) the sql_matchscope parameter in vdesk/admincon/index.php. |
| CVE-2008-2030 | Cross-site scripting (XSS) vulnerability in installControl.php3 in F5 FirePass 4100 SSL VPN 5.4.2-5.5.2 and 6.0-6.2 allows remote attackers to inject arbitrary web script or HTML via the query string. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2008-1618 | The PPTP VPN service in Watchguard Firebox before 10, when performing the MS-CHAPv2 authentication handshake, generates different error codes depending on whether the username is valid or invalid, which allows remote attackers to enumerate valid usernames. |
| CVE-2008-1397 | Check Point VPN-1 Power/UTM, with NGX R60 through R65 and NG AI R55 software, allows remote authenticated users to cause a denial of service (site-to-site VPN tunnel outage), and possibly intercept network traffic, by configuring the local RFC1918 IP address to be the same as one of this tunnel's endpoint RFC1918 IP addresses, and then using SecuRemote to connect to a network interface at the other endpoint. |
| CVE-2008-1208 | Cross-site scripting (XSS) vulnerability in the login page in Check Point VPN-1 UTM Edge W Embedded NGX 7.0.48x allows remote attackers to inject arbitrary web script or HTML via the user parameter. |
| CVE-2008-0915 | The Mediation server in IPdiva SSL VPN Server 2.2 before 2.2.8.84 and 2.3 before 2.3.2.14 stores the number of remaining allowed login attempts in a cookie, which makes it easier for remote attackers to conduct brute force attacks by manipulating this cookie's value. |
| CVE-2008-0914 | Multiple cross-site scripting (XSS) vulnerabilities in the Mediation server in IPdiva SSL VPN Server 2.2 before 2.2.8.84 and 2.3 before 2.3.2.14 allow remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2008-0662 | The Auto Local Logon feature in Check Point VPN-1 SecuRemote/SecureClient NGX R60 and R56 for Windows caches credentials under the Checkpoint\SecuRemote registry key, which has Everyone/Full Control permissions, which allows local users to gain privileges by reading and reusing the credentials. |
| CVE-2008-0537 | Unspecified vulnerability in the Supervisor Engine 32 (Sup32), Supervisor Engine 720 (Sup720), and Route Switch Processor 720 (RSP720) for multiple Cisco products, when using Multi Protocol Label Switching (MPLS) VPN and OSPF sham-link, allows remote attackers to cause a denial of service (blocked queue, device restart, or memory leak) via unknown vectors. |
| CVE-2008-0331 | Unspecified vulnerability in Funkwerk System Software before 7.4.1 PATCH 9 for certain Funkwerk Router / VPN devices allows remote attackers to cause a denial of service (panic and reboot) via unspecified DNS requests. |
| CVE-2008-0324 | Cisco Systems VPN Client IPSec Driver (CVPNDRVA.sys) 5.0.02.0090 allows local users to cause a denial of service (crash) by calling the 0x80002038 IOCTL with a small size value, which triggers memory corruption. |
| CVE-2008-0150 | Unspecified vulnerability in the LDAP authentication feature in Aruba Mobility Controller 2.3.6.15, 2.5.2.11, 2.5.4.25, 2.5.5.7, 3.1.1.3, and 2.4.8.11-FIPS or earlier allows remote attackers to bypass authentication mechanisms and obtain management or VPN interface access. |
| CVE-2007-6704 | Multiple cross-site scripting (XSS) vulnerabilities in F5 FirePass 4100 SSL VPN 5.4.1 through 5.5.2 and 6.0 through 6.0.1, when pre-logon sequences are enabled, allow remote attackers to inject arbitrary web script or HTML via the query string to (1) my.activation.php3 and (2) my.logon.php3. |
| CVE-2007-6273 | Multiple format string vulnerabilities in the configuration file in SonicWALL GLobal VPN Client 3.1.556 and 4.0.0.810 allow user-assisted remote attackers to execute arbitrary code via format string specifiers in the (1) Hostname tag or the (2) name attribute in the Connection tag. NOTE: there might not be any realistic circumstances in which this issue crosses privilege boundaries. |
| CVE-2007-6094 | The IPsec module in the VPN component in Ingate Firewall before 4.6.0 and SIParator before 4.6.0 allows remote attackers to cause a denial of service (module crash) via an IPsec Phase 2 proposal that lacks Perfect Forward Secrecy (PFS). |
| CVE-2007-5979 | Cross-site scripting (XSS) vulnerability in download_plugin.php3 in F5 Firepass 4100 SSL VPN 5.4 through 5.5.2 and 6.0 through 6.0.1 allows remote attackers to inject arbitrary web script or HTML via the backurl parameter. |
| CVE-2007-5815 | Absolute path traversal vulnerability in the WebCacheCleaner ActiveX control 1.3.0.3 in SonicWall SSL-VPN 200 before 2.1, and SSL-VPN 2000/4000 before 2.5, allows remote attackers to delete arbitrary files via a full pathname in the argument to the FileDelete method. |
| CVE-2007-5814 | Multiple buffer overflows in the SonicWall SSL-VPN NetExtender NELaunchCtrl ActiveX control before 2.1.0.51, and 2.5.x before 2.5.0.56, allow remote attackers to execute arbitrary code via a long (1) serverAddress, (2) sessionId, (3) clientIPLower, (4) clientIPHigher, (5) userName, (6) domainName, or (7) dnsSuffix Unicode property value. NOTE: the AddRouteEntry vector is covered by CVE-2007-5603. |
| CVE-2007-5603 | Stack-based buffer overflow in the SonicWall SSL-VPN NetExtender NELaunchCtrl ActiveX control before 2.1.0.51, and 2.5.x before 2.5.0.56, allows remote attackers to execute arbitrary code via a long string in the second argument to the AddRouteEntry method. |
| CVE-2007-5562 | Cross-site scripting (XSS) vulnerability in cgi-bin/welcome (aka the login page) in Netgear SSL312 PROSAFE SSL VPN-Concentrator 25 allows remote attackers to inject arbitrary web script or HTML via the err parameter in the context of an error page. |
| CVE-2007-4422 | The login interface in Symantec Enterprise Firewall 6.x, when a VPN with pre-shared key (PSK) authentication is enabled, generates different responses depending on whether or not a username is valid, which allows remote attackers to enumerate valid usernames. |
| CVE-2007-4415 | Cisco VPN Client on Windows before 5.0.01.0600, and the 5.0.01.0600 InstallShield (IS) release, uses weak permissions for cvpnd.exe (Modify granted to Interactive Users), which allows local users to gain privileges via a modified cvpnd.exe. |
| CVE-2007-4414 | Cisco VPN Client on Windows before 4.8.02.0010 allows local users to gain privileges by enabling the "Start Before Logon" (SBL) and Microsoft Dial-Up Networking options, and then interacting with the dial-up networking dialog box. |
| CVE-2007-3489 | Cross-site request forgery (CSRF) vulnerability in pop/WizU.html in the management interface in Check Point VPN-1 Edge X Embedded NGX 7.0.33x on the Check Point VPN-1 UTM Edge allows remote attackers to perform privileged actions as administrators, as demonstrated by a request with the swuuser and swupass parameters, which adds an administrator account. NOTE: the CSRF attack has no timing window because there is no logout capability in the management interface. |
| CVE-2007-3097 | my.activation.php3 in F5 FirePass 4100 SSL VPN allows remote attackers to execute arbitrary shell commands via shell metacharacters in the username parameter. |
| CVE-2007-2464 | Race condition in Cisco Adaptive Security Appliance (ASA) and PIX 7.1 before 7.1(2)49 and 7.2 before 7.2(2)19, when using "clientless SSL VPNs," allows remote attackers to cause a denial of service (device reload) via "non-standard SSL sessions." |
| CVE-2007-2463 | Unspecified vulnerability in Cisco Adaptive Security Appliance (ASA) and PIX 7.1 before 7.1(2)49 and 7.2 before 7.2(2)17 allows remote attackers to cause a denial of service (device reload) via unknown vectors related to VPN connection termination and password expiry. |
| CVE-2007-2462 | Unspecified vulnerability in Cisco Adaptive Security Appliance (ASA) and PIX 7.2 before 7.2(2)8, when using Layer 2 Tunneling Protocol (L2TP) or Remote Management Access, allows remote attackers to bypass LDAP authentication and gain privileges via unknown vectors. |
| CVE-2007-2434 | Buffer overflow in asnsp.dll in Aventail Connect 4.1.2.13 allows remote attackers to cause a denial of service (application crash) or execute arbitrary code via a malformed DNS query. |
| CVE-2007-2334 | Nortel VPN Router (aka Contivity) 1000, 2000, 4000, and 5000 before 5_05.149, 5_05.3xx before 5_05.304, and 6.x before 6_05.140 has two template HTML files lacking certain verification tags, which allows remote attackers to access the administration interface and change the device configuration via certain requests. |
| CVE-2007-2333 | Nortel VPN Router (aka Contivity) 1000, 2000, 4000, and 5000 before 5_05.149, 5_05.3xx before 5_05.304, and 6.x before 6_05.140 includes the FIPSecryptedtest1219 and FIPSunecryptedtest1219 default accounts in the LDAP template, which might allow remote attackers to access the private network. |
| CVE-2007-2332 | Nortel VPN Router (aka Contivity) 1000, 2000, 4000, and 5000 before 6_05.140 uses a fixed DES key to encrypt passwords, which allows remote authenticated users to obtain a password via a brute force attack on a hash from the LDAP store. |
| CVE-2007-1467 | Multiple cross-site scripting (XSS) vulnerabilities in (1) PreSearch.html and (2) PreSearch.class in Cisco Secure Access Control Server (ACS), VPN Client, Unified Personal Communicator, MeetingPlace, Unified MeetingPlace, Unified MeetingPlace Express, CallManager, IP Communicator, Unified Video Advantage, Unified Videoconferencing 35xx products, Unified Videoconferencing Manager, WAN Manager, Security Device Manager, Network Analysis Module (NAM), CiscoWorks and related products, Wireless LAN Solution Engine (WLSE), 2006 Wireless LAN Controllers (WLC), and Wireless Control System (WCS) allow remote attackers to inject arbitrary web script or HTML via the text field of the search form. |
| CVE-2007-1309 | Novell Access Management 3 SSLVPN Server allows remote authenticated users to bypass VPN restrictions by making policy.txt read-only, disconnecting, then manually modifying policy.txt. |
| CVE-2007-1057 | The Net Direct client for Linux before 6.0.5 in Nortel Application Switch 2424, VPN 3050 and 3070, and SSL VPN Module 1000 extracts and executes files with insecure permissions, which allows local users to exploit a race condition to replace a world-writable file in /tmp/NetClient and cause another user to execute arbitrary code when attempting to execute this client, as demonstrated by replacing /tmp/NetClient/client. |
| CVE-2007-0753 | Format string vulnerability in the VPN daemon (vpnd) in Apple Mac OS X 10.3.9 and 10.4.9 allows local users to execute arbitrary code via the -i parameter. |
| CVE-2007-0471 | sre/params.php in the Integrity Clientless Security (ICS) component in Check Point Connectra NGX R62 3.x and earlier before Security Hotfix 5, and possibly VPN-1 NGX R62, allows remote attackers to bypass security requirements via a crafted Report parameter, which returns a valid ICSCookie authentication token. |
| CVE-2007-0186 | Multiple cross-site scripting (XSS) vulnerabilities in F5 FirePass SSL VPN allow remote attackers to inject arbitrary web script or HTML via (1) the xcho parameter to my.logon.php3; the (2) topblue, (3) midblue, (4) wtopblue, and certain other Custom color parameters in a per action to vdesk/admincon/index.php; the (5) h321, (6) h311, (7) h312, and certain other Front Door custom text color parameters in a per action to vdesk/admincon/index.php; the (8) ua parameter in a bro action to vdesk/admincon/index.php; the (9) app_param and (10) app_name parameters to webyfiers.php; (11) double eval functions; (12) JavaScript contained in an <FP_DO_NOT_TOUCH> element; and (13) the vhost parameter to my.activation.php. NOTE: it is possible that this candidate overlaps CVE-2006-3550. |
| CVE-2006-5806 | SSL VPN Client in Cisco Secure Desktop before 3.1.1.45, when configured to spawn a web browser after a successful connection, stores sensitive browser session information in a directory outside of the CSD vault and does not restrict the user from saving files outside of the vault, which is not cleared after the VPN connection terminates and allows local users to read unencrypted data. |
| CVE-2006-5416 | Cross-site scripting (XSS) vulnerability in my.acctab.php3 in F5 Networks FirePass 1000 SSL VPN 5.5, and possibly earlier, allows remote attackers to inject arbitrary web script or HTML via the sid parameter. |
| CVE-2006-5394 | The default configuration of Cisco Secure Desktop (CSD) has an unchecked "Disable printing" box in Secure Desktop Settings, which might allow local users to read data that was sent to a printer during another user's SSL VPN session. |
| CVE-2006-5393 | Cisco Secure Desktop (CSD) does not require that the ClearPageFileAtShutdown (aka CCE-Winv2.0-407) registry value equals 1, which might allow local users to read certain memory pages that were written during another user's SSL VPN session. |
| CVE-2006-5286 | Unspecified vulnerability in IKE.NLM in Novell BorderManager 3.8 allows attackers to cause a denial of service (crash) via unknown attack vectors related to "VPN issues" for certain "IKE and IPsec settings." |
| CVE-2006-5179 | Intoto iGateway VPN and iGateway SSL-VPN allow context-dependent attackers to cause a denial of service (CPU consumption) via parasitic public keys with large (1) "public exponent" or (2) "public modulus" values in X.509 certificates that require extra time to process when using RSA signature verification, a related issue to CVE-2006-2940. |
| CVE-2006-4411 | The VPN service in Apple Mac OS X 10.3.x through 10.3.9 and 10.4.x through 10.4.8 does not properly clean the environment when executing commands, which allows local users to gain privileges via unspecified vectors. |
| CVE-2006-4313 | Multiple unspecified vulnerabilities in Cisco VPN 3000 series concentrators before 4.1, 4.1.x up to 4.1(7)L, and 4.7.x up to 4.7(2)F allow attackers to execute the (1) CWD, (2) MKD, (3) CDUP, (4) RNFR, (5) SIZE, and (6) RMD FTP commands to modify files or create and delete directories via unknown vectors. |
| CVE-2006-3906 | Internet Key Exchange (IKE) version 1 protocol, as implemented on Cisco IOS, VPN 3000 Concentrators, and PIX firewalls, allows remote attackers to cause a denial of service (resource exhaustion) via a flood of IKE Phase-1 packets that exceed the session expiration rate. NOTE: it has been argued that this is due to a design weakness of the IKE version 1 protocol, in which case other vendors and implementations would also be affected. |
| CVE-2006-3551 | NCP Secure Enterprise Client (aka VPN/PKI client) 8.30 Build 59, and possibly earlier versions, when the Link Firewall and Personal Firewall are both configured to block all inbound and outbound network traffic, allows context-dependent attackers to send inbound UDP traffic with source port 67 and destination port 68, and outbound UDP traffic with source port 68 and destination port 67. |
| CVE-2006-3252 | Buffer overflow in the Online Registration Facility for Algorithmic Research PrivateWire VPN software up to 3.7 allows remote attackers to execute arbitrary code via a long GET request. |
| CVE-2006-3073 | Multiple cross-site scripting (XSS) vulnerabilities in the WebVPN feature in the Cisco VPN 3000 Series Concentrators and Cisco ASA 5500 Series Adaptive Security Appliances (ASA), when in WebVPN clientless mode, allow remote attackers to inject arbitrary web script or HTML via the domain parameter in (1) dnserror.html and (2) connecterror.html, aka bugid CSCsd81095 (VPN3k) and CSCse48193 (ASA). NOTE: the vendor states that "WebVPN full-network-access mode" is not affected, despite the claims by the original researcher. |
| CVE-2006-2679 | Unspecified vulnerability in the VPN Client for Windows Graphical User Interface (GUI) (aka the VPN client dialer) in Cisco VPN Client for Windows 4.8.00.* and earlier, except for 4.7.00.0533, allows local authenticated, interactive users to gain privileges, possibly due to privileges of dialog boxes, aka bug ID CSCsd79265. |
| CVE-2006-2229 | OpenVPN 2.0.7 and earlier, when configured to use the --management option with an IP that is not 127.0.0.1, uses a cleartext password for TCP sessions to the management interface, which might allow remote attackers to view sensitive information or cause a denial of service. |
| CVE-2006-2086 | Buffer overflow in JuniperSetupDLL.dll, loaded from JuniperSetup.ocx by the Juniper SSL-VPN Client when accessing a Juniper NetScreen IVE device running IVE OS before 4.2r8.1, 5.0 before 5.0r6.1, 5.1 before 5.1r8, 5.2 before 5.2r4.1, or 5.3 before 5.3r2.1, allows remote attackers to execute arbitrary code via a long argument in the ProductName parameter. |
| CVE-2006-1357 | Cross-site scripting (XSS) vulnerability in my.support.php3 in F5 Firepass 4100 SSL VPN 5.4.2 allows remote attackers to inject arbitrary web script or HTML via the s parameter. |
| CVE-2006-0968 | The ncprwsnt service in NCP Network Communication Secure Client 8.11 Build 146, and possibly other versions, allows local users to execute arbitrary code by modifying the connect.bat script, which is automatically executed by the service after a connection is established. |
| CVE-2006-0967 | NCP Network Communication Secure Client 8.11 Build 146, and possibly other versions, allows local users to cause a denial of service (memory usage and cpu utilization) via a flood of arbitrary UDP datagrams to ports 0 to 65000. NOTE: this issue was reported as a buffer overflow, but that term usually does not apply in flooding attacks. |
| CVE-2006-0966 | NCP Network Communication Secure Client 8.11 Build 146, and possibly other versions, allows local users to cause a denial of service (CPU consumption) via a large number of arguments to ncprwsnt.exe, possibly due to a buffer overflow. |
| CVE-2006-0965 | NCP Network Communication Secure Client 8.11 Build 146, and possibly other versions, allows local users to bypass security protections and configure privileged options via a long argument to ncpmon.exe, which provides access to alternate privileged menus, possibly due to a buffer overflow. |
| CVE-2006-0964 | Client Firewall in NCP Network Communication Secure Client 8.11 Build 146, and possibly other versions, allows local users to bypass firewall program execution rules by replacing an allowed program with an arbitrary program. |
| CVE-2006-0483 | Cisco VPN 3000 series concentrators running software 4.7.0 through 4.7.2.A allow remote attackers to cause a denial of service (device reload or user disconnect) via a crafted HTTP packet. |
| CVE-2006-0383 | IPSec when used with VPN networks in Mac OS X 10.4 through 10.4.5 allows remote attackers to cause a denial of service (application crash) via unspecified vectors involving the "incorrect handling of error conditions". |
| CVE-2006-0309 | Linksys BEFVP41 VPN Router 2.0 with firmware 1.01.04 allows remote attackers on the local network, to cause a denial of service via IP packets with a null IP option length. |
| CVE-2006-0255 | Unquoted Windows search path vulnerability in Check Point VPN-1 SecureClient might allow local users to gain privileges via a malicious "program.exe" file in the C: folder, which is run when SecureClient attempts to launch the Sr_GUI.exe program. |
| CVE-2005-4499 | The Downloadable RADIUS ACLs feature in Cisco PIX and VPN 3000 concentrators, when creating an ACL on the Cisco Secure Access Control Server (CS ACS), generates a random internal name for an ACL that is also used as a hidden user name and password, which allows remote attackers to gain privileges by sniffing the username from the cleartext portion of a RADIUS session, then using the password to log in to another device that uses CS ACS. |
| CVE-2005-4197 | tunnelform.yaws in Nortel SSL VPN 4.2.1.6 allows remote attackers to execute arbitrary commands via a link in the a parameter, which is executed with extra privileges in a cryptographically signed Java Applet. |
| CVE-2005-4093 | Check Point VPN-1 SecureClient NG with Application Intelligence R56, NG FP1, 4.0, and 4.1 allows remote attackers to bypass security policies by modifying the local copy of the local.scv policy file after it has been downloaded from the VPN Endpoint. |
| CVE-2005-3768 | Buffer overflow in the Internet Key Exchange version 1 (IKEv1) implementation in Symantec Dynamic VPN Services, as used in Enterprise Firewall, Gateway Security, and Firewall /VPN Appliance products, allows remote attackers to cause a denial of service and possibly execute arbitrary code via crafted IKE packets, as demonstrated by the PROTOS ISAKMP Test Suite for IKEv1. |
| CVE-2005-3409 | OpenVPN 2.x before 2.0.4, when running in TCP mode, allows remote attackers to cause a denial of service (segmentation fault) by forcing the accept function call to return an error status, which leads to a null dereference in an exception handler. |
| CVE-2005-2762 | Avaya VPNRemote before 4.2.33 stores credentials in cleartext in process memory, which allows attackers to obtain the VPN user's credentials. |
| CVE-2005-2640 | Behavioral discrepancy information leak in Juniper Netscreen VPN running ScreenOS 5.2.0 and earlier, when using IKE with pre-shared key authentication, allows remote attackers to enumerate valid usernames via an IKE Aggressive Mode packet, which generates a response if the username is valid but does not respond when the username is invalid. |
| CVE-2005-2579 | Nortel Contivity VPN Client V05_01.030, when configuring a certificate to be used as authentication, does not properly drop system privileges, which allows local users to gain privileges by opening a program with the File Open dialog box. |
| CVE-2005-2534 | Race condition in OpenVPN before 2.0.1, when --duplicate-cn is not enabled, allows remote attackers to cause a denial of service (server crash) via simultaneous TCP connections from multiple clients that use the same client certificate. |
| CVE-2005-2533 | OpenVPN before 2.0.1, when running in "dev tap" Ethernet bridging mode, allows remote authenticated clients to cause a denial of service (memory exhaustion) via a flood of packets with a large number of spoofed MAC addresses. |
| CVE-2005-2532 | OpenVPN before 2.0.1 does not properly flush the OpenSSL error queue when a packet can not be decrypted by the server, which allows remote authenticated attackers to cause a denial of service (client disconnection) via a large number of packets that can not be decrypted. |
| CVE-2005-2531 | OpenVPN before 2.0.1, when running with "verb 0" and without TLS authentication, does not properly flush the OpenSSL error queue when a client fails certificate authentication to the server and causes the error to be processed by the wrong client, which allows remote attackers to cause a denial of service (client disconnection) via a large number of failed authentication attempts. |
| CVE-2005-2025 | Cisco VPN 3000 Concentrator before 4.1.7.F allows remote attackers to determine valid groupnames by sending an IKE Aggressive Mode packet with the groupname in the ID field, which generates a response if the groupname is valid, but does not generate a response for an invalid groupname. |
| CVE-2005-1802 | Nortel VPN Router (aka Contivity) allows remote attackers to cause a denial of service (crash) via an IPsec IKE packet with a malformed ISAKMP header. |
| CVE-2005-1343 | Stack-based buffer overflow in the VPN daemon (vpnd) for Mac OS X before 10.3.9 allows local users to execute arbitrary code via a long -i (Server_id) argument. |
| CVE-2005-1057 | Cisco IOS 12.2T, 12.3 and 12.3T, when using Easy VPN Server XAUTH version 6 authentication, allows remote attackers to bypass authentication via a "malformed packet." |
| CVE-2005-0943 | Cisco VPN 3000 series Concentrator running firmware 4.1.7.A and earlier allows remote attackers to cause a denial of service (device reload or drop user connection) via a crafted HTTPS packet. |
| CVE-2005-0844 | Nortel VPN client 5.01 stores the cleartext password in the memory of the Extranet.exe process, which could allow local users to obtain sensitive information. |
| CVE-2005-0618 | The SMTP binding function in Symantec Firewall/VPN Appliance 200/200R firmware after 1.5Z and before 1.68, Gateway Security 360/360R and 460/460R firmware before vuild 858, and Nexland Pro800turbo, when configured for load balancing between two WANs, might send SMTP traffic to a trusted network through an untrusted network. |
| CVE-2005-0346 | SafeNet SoftRemote VPN Client stores the VPN password (pre-shared key) in cleartext in memory of the IreIKE.exe process, which allows local users to gain sensitive information if they have access to that process. |
| CVE-2004-2621 | Nortel Contivity VPN Client 2.1.7, 3.00, 3.01, 4.91, and 5.01, when opening a VPN tunnel, does not check the gateway certificate until after a dialog box has been displayed to the user, which creates a race condition that allows remote attackers to perform a man-in-the-middle (MITM) attack. |
| CVE-2004-1483 | Multiple unknown vulnerabilities in the ActiveX and HTML file browsers in Symantec Clientless VPN Gateway 4400 Series 5.0 have unknown attack vectors and unknown impact. |
| CVE-2004-1474 | Symantec Enterprise Firewall/VPN Appliances 100, 200, and 200R running firmware before 1.63 and Gateway Security 320, 360, and 360R running firmware before 622 uses a default read/write SNMP community string, which allows remote attackers to alter the firewall's configuration file. |
| CVE-2004-1473 | Symantec Enterprise Firewall/VPN Appliances 100, 200, and 200R running firmware before 1.63 and Gateway Security 320, 360, and 360R running firmware before 622 allow remote attackers to bypass filtering and determine whether the device is running services such as tftpd, snmpd, or isakmp via a UDP port scan with a source port of UDP 53. |
| CVE-2004-1472 | Symantec Enterprise Firewall/VPN Appliances 100, 200, and 200R running firmware before 1.63 allow remote attackers to cause a denial of service (device freeze) via a fast UDP port scan on the WAN interface. |
| CVE-2004-1457 | The Virtual Private Network (VPN) capability in Novell Bordermanager 3.8 allows remote attackers to cause a denial of service (ABEND in IKE.NLM) via a malformed IKE packet, as sent by the Striker ISAKMP Protocol Test Suite. |
| CVE-2004-1105 | Nortel Networks Contivity VPN Client displays a different error message depending on whether the username is valid or invalid, which could allow remote attackers to gain sensitive information. |
| CVE-2004-0710 | IP Security VPN Services Module (VPNSM) in Cisco Catalyst 6500 Series Switch and the Cisco 7600 Series Internet Routers running IOS before 12.2(17b)SXA, before 12.2(17d)SXB, or before 12.2(14)SY03 could allow remote attackers to cause a denial of service (device crash and reload) via a malformed Internet Key Exchange (IKE) packet. |
| CVE-2004-0699 | Heap-based buffer overflow in ASN.1 decoding library in Check Point VPN-1 products, when Aggressive Mode IKE is implemented, allows remote attackers to execute arbitrary code by initiating an IKE negotiation and then sending an IKE packet with malformed ASN.1 data. |
| CVE-2004-0611 | Web-Based Administration in Netgear FVS318 VPN Router allows remote attackers to cause a denial of service (no new connections) via a large number of open HTTP connections. |
| CVE-2004-0469 | Buffer overflow in the ISAKMP functionality for Check Point VPN-1 and FireWall-1 NG products, before VPN-1/FireWall-1 R55 HFA-03, R54 HFA-410 and NG FP3 HFA-325, or VPN-1 SecuRemote/SecureClient R56, may allow remote attackers to execute arbitrary code during VPN tunnel negotiation. |
| CVE-2004-0347 | Cross-site scripting (XSS) vulnerability in delhomepage.cgi in NetScreen-SA 5000 Series running firmware 3.3 Patch 1 (build 4797) allows remote authenticated users to execute arbitrary script as other users via the row parameter. |
| CVE-2004-0190 | Symantec FireWall/VPN Appliance model 200 records a cleartext password for the password administration page, which may be cached on the administrator's local system or in a proxy, which allows attackers to steal the password and gain privileges. |
| CVE-2004-0040 | Stack-based buffer overflow in Check Point VPN-1 Server 4.1 through 4.1 SP6 and Check Point SecuRemote/SecureClient 4.1 through 4.1 build 4200 allows remote attackers to execute arbitrary code via an ISAKMP packet with a large Certificate Request packet. |
| CVE-2003-1004 | Cisco PIX firewall 6.2.x through 6.2.3, when configured as a VPN Client, allows remote attackers to cause a denial of service (dropped IPSec tunnel connection) via an IKE Phase I negotiation request to the outside interface of the firewall. |
| CVE-2003-0260 | Cisco VPN 3000 series concentrators and Cisco VPN 3002 Hardware Client 2.x.x through 3.6.7A allow remote attackers to cause a denial of service (slowdown and possibly reload) via a flood of malformed ICMP packets. |
| CVE-2003-0259 | Cisco VPN 3000 series concentrators and Cisco VPN 3002 Hardware Client 2.x.x through 3.6.7 allows remote attackers to cause a denial of service (reload) via a malformed SSH initialization packet. |
| CVE-2003-0258 | Cisco VPN 3000 series concentrators and Cisco VPN 3002 Hardware Client 3.5.x through 4.0.REL, when enabling IPSec over TCP for a port on the concentrator, allow remote attackers to reach the private network without authentication. |
| CVE-2003-0126 | The web interface for SOHO Routefinder 550 firmware 4.63 and earlier, and possibly later versions, has a default "admin" account with a blank password, which could allow attackers on the LAN side to conduct unauthorized activities. |
| CVE-2003-0125 | Buffer overflow in the web interface for SOHO Routefinder 550 before firmware 4.63 allows remote attackers to cause a denial of service (reboot) and execute arbitrary code via a long GET /OPTIONS value. |
| CVE-2002-2317 | Memory leak in the (1) httpd, (2) nntpd, and (3) vpn driver in VelociRaptor 1.0 allows remote attackers to cause a denial of service (memory consumption) via an unknown method. |
| CVE-2002-2225 | SafeNet VPN client allows remote attackers to cause a denial of service and possibly execute arbitrary code via crafted Internet Key Exchange (IKE) response packets, possibly involving buffer overflows using (1) a large Security Parameter Index (SPI) field, (2) a large number of payloads, or (3) a long payload. |
| CVE-2002-2139 | Cisco PIX Firewall 6.0.3 and earlier, and 6.1.x to 6.1.3, do not delete the duplicate ISAKMP SAs for a user's VPN session, which allows local users to hijack a session via a man-in-the-middle attack. |
| CVE-2002-1937 | Symantec Firewall/VPN Appliance 100 through 200R hardcodes the administrator's MAC address inside the firewall's configuration, which allows remote attackers to spoof the administrator's MAC address and perform an ARP poisoning man-in-the-middle attack to obtain the administrator's password. |
| CVE-2002-1755 | tinc 1.0pre3 and 1.0pre4 VPN does not authenticate forwarded packets, which allows remote attackers to inject data into user sessions without detection, and possibly control the data contents via cut-and-paste attacks on CBC. |
| CVE-2002-1492 | Buffer overflows in the Cisco VPN 5000 Client before 5.2.7 for Linux, and VPN 5000 Client before 5.2.8 for Solaris, allow local users to gain root privileges via (1) close_tunnel and (2) open_tunnel. |
| CVE-2002-1491 | The Cisco VPN 5000 Client for MacOS before 5.2.2 records the most recently used login password in plaintext when saving "Default Connection" settings, which could allow local users to gain privileges. |
| CVE-2002-1447 | Buffer overflow in the vpnclient program for UNIX VPN Client before 3.5.2 allows local users to gain administrative privileges via a long profile name in a connect argument. |
| CVE-2002-1108 | Cisco Virtual Private Network (VPN) Client software 2.x.x, and 3.x before 3.6(Rel), when configured with all tunnel mode, can be forced into acknowledging a TCP packet from outside the tunnel. |
| CVE-2002-1107 | Cisco Virtual Private Network (VPN) Client software 2.x.x, and 3.x before 3.5.2B, does not generate sufficiently random numbers, which may make it vulnerable to certain attacks such as spoofing. |
| CVE-2002-1106 | Cisco Virtual Private Network (VPN) Client software 2.x.x, and 3.x before 3.5.1C, does not properly verify that certificate DN fields match those of the certificate from the VPN Concentrator, which allows remote attackers to conduct man-in-the-middle attacks. |
| CVE-2002-1105 | Cisco Virtual Private Network (VPN) Client software 2.x.x, and 3.x before 3.5.1C, allows local users to use a utility program to obtain the group password. |
| CVE-2002-1104 | Cisco Virtual Private Network (VPN) Client software 2.x.x and 3.x before 3.0.5 allows remote attackers to cause a denial of service (crash) via TCP packets with source and destination ports of 137 (NETBIOS). |
| CVE-2002-1103 | Cisco VPN 3000 Concentrator 2.2.x, 3.6(Rel), and 3.x before 3.5.5, allows remote attackers to cause a denial of service via (1) malformed or (2) large ISAKMP packets. |
| CVE-2002-1102 | The LAN-to-LAN IPSEC capability for Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.4, allows remote attackers to cause a denial of service via an incoming LAN-to-LAN connection with an existing security association with another device on the remote network, which causes the concentrator to remove the previous connection. |
| CVE-2002-1101 | Cisco VPN 3000 Concentrator 2.2.x, 3.6(Rel), and 3.x before 3.5.5, allows remote attackers to cause a denial of service via a long user name. |
| CVE-2002-1100 | Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.3, allows remote attackers to cause a denial of service (crash) via a long (1) username or (2) password to the HTML login interface. |
| CVE-2002-1099 | Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.3, allows remote attackers to obtain potentially sensitive information without authentication by directly accessing certain HTML pages. |
| CVE-2002-1098 | Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.3, adds an "HTTPS on Public Inbound (XML-Auto)(forward/in)" rule but sets the protocol to "ANY" when the XML filter configuration is enabled, which ultimately allows arbitrary traffic to pass through the concentrator. |
| CVE-2002-1097 | Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.2, allows restricted administrators to obtain certificate passwords that are stored in plaintext in the HTML source code for Certificate Management pages. |
| CVE-2002-1096 | Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.1, allows restricted administrators to obtain user passwords that are stored in plaintext in HTML source code. |
| CVE-2002-1095 | Cisco VPN 3000 Concentrator before 2.5.2(F), with encryption enabled, allows remote attackers to cause a denial of service (reload) via a Windows-based PPTP client with the "No Encryption" option set. |
| CVE-2002-1094 | Information leaks in Cisco VPN 3000 Concentrator 2.x.x and 3.x.x before 3.5.4 allow remote attackers to obtain potentially sensitive information via the (1) SSH banner, (2) FTP banner, or (3) an incorrect HTTP request. |
| CVE-2002-1093 | HTML interface for Cisco VPN 3000 Concentrator 2.x.x and 3.x.x before 3.0.3(B) allows remote attackers to cause a denial of service (CPU consumption) via a long URL request. |
| CVE-2002-1092 | Cisco VPN 3000 Concentrator 3.6(Rel) and earlier, and 2.x.x, when configured to use internal authentication with group accounts and without any user accounts, allows remote VPN clients to log in using PPTP or IPSEC user authentication. |
| CVE-2002-1046 | Dynamic VPN Configuration Protocol service (DVCP) in Watchguard Firebox firmware 5.x.x allows remote attackers to cause a denial of service (crash) via a malformed packet containing tab characters to TCP port 4110. |
| CVE-2002-0853 | Cisco Virtual Private Network (VPN) Client 3.5.4 and earlier allows remote attackers to cause a denial of service (CPU consumption) via a packet with a zero-length payload. |
| CVE-2002-0852 | Buffer overflows in Cisco Virtual Private Network (VPN) Client 3.5.4 and earlier allows remote attackers to cause a denial of service via (1) an Internet Key Exchange (IKE) with a large Security Parameter Index (SPI) payload, or (2) an IKE packet with a large number of valid payloads. |
| CVE-2002-0848 | Cisco VPN 5000 series concentrator hardware 6.0.21.0002 and earlier, and 5.2.23.0003 and earlier, when using RADIUS with a challenge type of Password Authentication Protocol (PAP) or Challenge, sends the user password in cleartext in a validation retry request, which could allow remote attackers to steal passwords via sniffing. |
| CVE-2002-0426 | VPN Server module in Linksys EtherFast BEFVP41 Cable/DSL VPN Router before 1.40.1 reduces the key lengths for keys that are supplied via manual key entry, which makes it easier for attackers to crack the keys. |
| CVE-2002-0366 | Buffer overflow in Remote Access Service (RAS) phonebook for Windows NT 4.0, 2000, XP, and Routing and Remote Access Server (RRAS) allows local users to execute arbitrary code by modifying the rasphone.pbk file to use a long dial-up entry. |
| CVE-2002-0047 | CIPE VPN package before 1.3.0-3 allows remote attackers to cause a denial of service (crash) via a short malformed packet. |
| CVE-2001-1499 | Check Point VPN-1 4.1SP4 using SecuRemote returns different error messages for valid and invalid users, with prompts that vary depending on the authentication method being used, which makes it easier for remote attackers to conduct brute force attacks. |
| CVE-2001-1431 | Nokia Firewall Appliances running IPSO 3.3 and VPN-1/FireWall-1 4.1 Service Pack 3, IPSO 3.4 and VPN-1/FireWall-1 4.1 Service Pack 4, and IPSO 3.4 or IPSO 3.4.1 and VPN-1/FireWall-1 4.1 Service Pack 5, when SYN Defender is configured in Active Gateway mode, does not properly rewrite the third packet of a TCP three-way handshake to use the NAT IP address, which allows remote attackers to gain sensitive information. |
| CVE-2001-1176 | Format string vulnerability in Check Point VPN-1/FireWall-1 4.1 allows a remote authenticated firewall administrator to execute arbitrary code via format strings in the control connection. |
| CVE-2001-1158 | Check Point VPN-1/FireWall-1 4.1 base.def contains a default macro, accept_fw1_rdp, which can allow remote attackers to bypass intended restrictions with forged RDP (internal protocol) headers to UDP port 259 of arbitrary hosts. |
| CVE-2001-0940 | Buffer overflow in the GUI authentication code of Check Point VPN-1/FireWall-1 Management Server 4.0 and 4.1 allows remote attackers to execute arbitrary code via a long user name. |
| CVE-2001-0486 | Remote attackers can cause a denial of service in Novell BorderManager 3.6 and earlier by sending TCP SYN flood to port 353. |
| CVE-2001-0428 | Cisco VPN 3000 series concentrators before 2.5.2(F) allow remote attackers to cause a denial of service via an IP packet with an invalid IP option. |
| CVE-2001-0427 | Cisco VPN 3000 series concentrators before 2.5.2(F) allow remote attackers to cause a denial of service via a flood of invalid login requests to (1) the SSL service, or (2) the telnet service, which do not properly disconnect the user after several failed login attempts. |
| CVE-2001-0082 | Check Point VPN-1/FireWall-1 4.1 SP2 with Fastmode enabled allows remote attackers to bypass access restrictions via malformed, fragmented packets. |
| CVE-2000-0813 | Check Point VPN-1/FireWall-1 4.1 and earlier allows remote attackers to redirect FTP connections to other servers ("FTP Bounce") via invalid FTP commands that are processed improperly by FireWall-1, aka "FTP Connection Enforcement Bypass." |
| CVE-2000-0809 | Buffer overflow in Getkey in the protocol checker in the inter-module communication mechanism in Check Point VPN-1/FireWall-1 4.1 and earlier allows remote attackers to cause a denial of service. |
| CVE-2000-0808 | The seed generation mechanism in the inter-module S/Key authentication mechanism in Check Point VPN-1/FireWall-1 4.1 and earlier allows remote attackers to bypass authentication via a brute force attack, aka "One-time (s/key) Password Authentication." |
| CVE-2000-0807 | The OPSEC communications authentication mechanism (fwn1) in Check Point VPN-1/FireWall-1 4.1 and earlier allows remote attackers to spoof connections, aka the "OPSEC Authentication Vulnerability." |
| CVE-2000-0806 | The inter-module authentication mechanism (fwa1) in Check Point VPN-1/FireWall-1 4.1 and earlier may allow remote attackers to conduct a denial of service, aka "Inter-module Communications Bypass." |
| CVE-2000-0805 | Check Point VPN-1/FireWall-1 4.1 and earlier improperly retransmits encapsulated FWS packets, even if they do not come from a valid FWZ client, aka "Retransmission of Encapsulated Packets." |
| CVE-2000-0804 | Check Point VPN-1/FireWall-1 4.1 and earlier allows remote attackers to bypass the directionality check via fragmented TCP connection requests or reopening closed TCP connection requests, aka "One-way Connection Enforcement Bypass." |
| CVE-2000-0784 | sshd program in the Rapidstream 2.1 Beta VPN appliance has a hard-coded "rsadmin" account with a null password, which allows remote attackers to execute arbitrary commands via ssh. |
| CVE-1999-0675 | Check Point FireWall-1 can be subjected to a denial of service via UDP packets that are sent through VPN-1 to port 0 of a host. |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
