Search Results

There are 565 CVE entries that match your search.
Name Description
CVE-2019-9228 ** DISPUTED ** An issue was discovered on AudioCodes Mediant 500L-MSBR, 500-MBSR, M800B-MSBR and 800C-MSBR devices with firmware versions F7.20A at least to 7.20A.252.062. The (1) management SSH and (2) management TELNET features allow remote attackers to cause a denial of service (connection slot exhaustion) via 5 unauthenticated connection attempts, because the maximum number of unauthenticated clients that can be configured is 5. NOTE: the vendor's position is that this is a "design choice."
CVE-2019-9160 WAC on the Sangfor Sundray WLAN Controller version 3.7.4.2 and earlier has a backdoor account allowing a remote attacker to login to the system via SSH (on TCP port 22345) and escalate to root (because the password for root is the WebUI admin password concatenated with a static string).
CVE-2019-7690 In MobaTek MobaXterm Personal Edition v11.1 Build 3860, the SSH private key and its password can be retrieved from process memory for the lifetime of the process, even after the user disconnects from the remote SSH server. This affects Passwordless Authentication that has a Password Protected SSH Private Key.
CVE-2019-7476 A vulnerability in SonicWall Global Management System (GMS), allow a remote user to gain access to the appliance using existing SSH key. This vulnerability affects GMS versions 9.1, 9.0, 8.7, 8.6, 8.4, 8.3 and earlier.
CVE-2019-7265 Linear eMerge E3-Series devices allow Remote Code Execution (root access over SSH).
CVE-2019-6111 An issue was discovered in OpenSSH 7.9. Due to the scp implementation being derived from 1983 rcp, the server chooses which files/directories are sent to the client. However, the scp client only performs cursory validation of the object name returned (only directory traversal attacks are prevented). A malicious scp server (or Man-in-The-Middle attacker) can overwrite arbitrary files in the scp client target directory. If recursive operation (-r) is performed, the server can manipulate subdirectories as well (for example, to overwrite the .ssh/authorized_keys file).
CVE-2019-5672 NVIDIA Jetson TX1 and TX2 contain a vulnerability in the Linux for Tegra (L4T) operating system (on all versions prior to R28.3) where the Secure Shell (SSH) keys provided in the sample rootfs are not replaced by unique host keys after sample rootsfs generation and flashing, which may lead to information disclosure.
CVE-2019-5445 DoS in EdgeMAX EdgeSwitch prior to 1.8.2 allow an Admin user to Crash the SSH CLI interface by using crafted commands.
CVE-2019-5426 In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, an unauthenticated user can use the "local port forwarding" and "dynamic port forwarding" (SOCKS proxy) functionalities. Remote attackers without credentials can exploit this bug to access local services or forward traffic through the device if SSH is enabled in the system settings.
CVE-2019-5425 In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, an authenticated user can execute arbitrary shell commands over the SSH interface bypassing the CLI interface, which allow them to escalate privileges to root.
CVE-2019-5424 In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user.
CVE-2019-3918 The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 contains multiple hard coded credentials for the Telnet and SSH interfaces.
CVE-2019-3862 An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit status message and no payload are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.
CVE-2019-3861 An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH packets with a padding length value greater than the packet length are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.
CVE-2019-3860 An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SFTP packets with empty payloads are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.
CVE-2019-3859 An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the _libssh2_packet_require and _libssh2_packet_requirev functions. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.
CVE-2019-3858 An out of bounds read flaw was discovered in libssh2 before 1.8.1 when a specially crafted SFTP packet is received from the server. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.
CVE-2019-3857 An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit signal are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.
CVE-2019-3856 An integer overflow flaw, which could lead to an out of bounds write, was discovered in libssh2 before 1.8.1 in the way keyboard prompt requests are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.
CVE-2019-3855 An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way packets are read from the server. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server.
CVE-2019-1859 A vulnerability in the Secure Shell (SSH) authentication process of Cisco Small Business Switches software could allow an attacker to bypass client-side certificate authentication and revert to password authentication. The vulnerability exists because OpenSSH mishandles the authentication process. An attacker could exploit this vulnerability by attempting to connect to the device via SSH. A successful exploit could allow the attacker to access the configuration as an administrative user if the default credentials are not changed. There are no workarounds available; however, if client-side certificate authentication is enabled, disable it and use strong password authentication. Client-side certificate authentication is disabled by default.
CVE-2019-1842 A vulnerability in the Secure Shell (SSH) authentication function of Cisco IOS XR Software could allow an authenticated, remote attacker to successfully log in to an affected device using two distinct usernames. The vulnerability is due to a logic error that may occur when certain sequences of actions are processed during an SSH login event on the affected device. An attacker could exploit this vulnerability by initiating an SSH session to the device with a specific sequence that presents the two usernames. A successful exploit could result in logging data misrepresentation, user enumeration, or, in certain circumstances, a command authorization bypass. See the Details section for more information.
CVE-2019-1805 A vulnerability in certain access control mechanisms for the Secure Shell (SSH) server implementation for Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to access a CLI instance on an affected device. The vulnerability is due to a lack of proper input- and validation-checking mechanisms for inbound SSH connections on an affected device. An attacker could exploit this vulnerability by attempting to establish an SSH connection to an affected controller. An exploit could allow the attacker to access an affected device's CLI to potentially cause further attacks. This vulnerability has been fixed in version 8.5(140.0).
CVE-2019-1804 A vulnerability in the SSH key management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, remote attacker to connect to the affected system with the privileges of the root user. The vulnerability is due to the presence of a default SSH key pair that is present in all devices. An attacker could exploit this vulnerability by opening an SSH connection via IPv6 to a targeted device using the extracted key materials. An exploit could allow the attacker to access the system with the privileges of the root user. This vulnerability is only exploitable over IPv6; IPv4 is not vulnerable.
CVE-2019-1731 A vulnerability in the SSH CLI key management functionality of Cisco NX-OS Software could allow an authenticated, local attacker to expose a user's private SSH key to all authenticated users on the targeted device. The attacker must authenticate with valid administrator device credentials. The vulnerability is due to incomplete error handling if a specific error type occurs during the SSH key export. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the CLI. A successful exploit could allow the attacker to expose a user's private SSH key. In addition, a similar type of error in the SSH key import could cause the passphrase-protected private SSH key to be imported unintentionally.
CVE-2019-1656 A vulnerability in the CLI of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to access the shell of the underlying Linux operating system on the affected device. The vulnerability is due to improper input validation in the affected software. An attacker could exploit this vulnerability by sending crafted commands to the affected device. An exploit could allow the attacker to gain shell access with a nonroot user account to the underlying Linux operating system on the affected device and potentially access system configuration files with sensitive information. This vulnerability only affects console connections from CIMC. It does not apply to remote connections, such as telnet or SSH.
CVE-2019-13115 In libssh2 before 1.9.0, kex_method_diffie_hellman_group_exchange_sha256_key_exchange in kex.c has an integer overflow that could lead to an out-of-bounds read in the way packets are read from the server. A remote attacker who compromises a SSH server may be able to disclose sensitive information or cause a denial of service condition on the client system when a user connects to the server. This is related to an _libssh2_check_length mistake, and is different from the various issues fixed in 1.8.1, such as CVE-2019-3855.
CVE-2019-12776 An issue was discovered on the ENTTEC Datagate MK2, Storm 24, Pixelator, and E-Streamer MK2 with firmware 70044_update_05032019-482. They include a hard-coded SSH backdoor for remote SSH and SCP access as the root user. A command in the relocate and relocate_revB scripts copies the hardcoded key to the root user's authorized_keys file, enabling anyone with the associated private key to gain remote root access to all affected products.
CVE-2019-12550 WAGO 852-303 before FW06, 852-1305 before FW06, and 852-1505 before FW03 devices contain hardcoded users and passwords that can be used to login via SSH and TELNET.
CVE-2019-12549 WAGO 852-303 before FW06, 852-1305 before FW06, and 852-1505 before FW03 devices contain hardcoded private keys for the SSH daemon. The fingerprint of the SSH host key from the corresponding SSH daemon matches the embedded private key.
CVE-2019-11328 An issue was discovered in Singularity 3.1.0 to 3.2.0-rc2, a malicious user with local/network access to the host system (e.g. ssh) could exploit this vulnerability due to insecure permissions allowing a user to edit files within `/run/singularity/instances/sing/<user>/<instance>`. The manipulation of those files can change the behavior of the starter-suid program when instances are joined resulting in potential privilege escalation on the host.
CVE-2019-10150 It was found that OpenShift Container Platform versions 3.6.x - 4.6.0 does not perform SSH Host Key checking when using ssh key authentication during builds. An attacker, with the ability to redirect network traffic, could use this to alter the resulting build output.
CVE-2019-1000018 rssh version 2.3.4 contains a CWE-77: Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in allowscp permission that can result in Local command execution. This attack appear to be exploitable via An authorized SSH user with the allowscp permission.
CVE-2019-0816 A security feature bypass exists in Azure SSH Keypairs, due to a change in the provisioning logic for some Linux images that use cloud-init, aka 'Azure SSH Keypairs Security Feature Bypass Vulnerability'.
CVE-2018-9083 In System Management Module (SMM) versions prior to 1.06, the SMM contains weak default root credentials which could be used to log in to the device OS -- if the attacker manages to enable SSH or Telnet connections via some other vulnerability.
CVE-2018-7750 transport.py in the SSH server implementation of Paramiko before 1.17.6, 1.18.x before 1.18.5, 2.0.x before 2.0.8, 2.1.x before 2.1.5, 2.2.x before 2.2.3, 2.3.x before 2.3.2, and 2.4.x before 2.4.1 does not properly check whether authentication is completed before processing other requests, as demonstrated by channel-open. A customized SSH client can simply skip the authentication step.
CVE-2018-7749 The SSH server implementation of AsyncSSH before 1.12.1 does not properly check whether authentication is completed before processing other requests. A customized SSH client can simply skip the authentication step.
CVE-2018-7236 A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could enable SSH service due to lack of authentication for /login/bin/set_param could enable SSH service.
CVE-2018-6825 An issue was discovered on VOBOT CLOCK before 0.99.30 devices. An SSH server exists with a hardcoded vobot account that has root access.
CVE-2018-6695 SSH host keys generation vulnerability in the server in McAfee Threat Intelligence Exchange Server (TIE Server) 1.3.0, 2.0.x, 2.1.x, 2.2.0 allows man-in-the-middle attackers to spoof servers via acquiring keys from another environment.
CVE-2018-6517 Prior to version 0.3.0, chloride's use of net-ssh resulted in host fingerprints for previously unknown hosts getting added to the user's known_hosts file without confirmation. In version 0.3.0 this is updated so that the user's known_hosts file is not updated by chloride.
CVE-2018-6000 An issue was discovered in AsusWRT before 3.0.0.4.384_10007. The do_vpnupload_post function in router/httpd/web.c in vpnupload.cgi provides functionality for setting NVRAM configuration values, which allows attackers to set the admin password and launch an SSH daemon (or enable infosvr command mode), and consequently obtain remote administrative access, via a crafted request. This is available to unauthenticated attackers in conjunction with CVE-2018-5999.
CVE-2018-5473 An Improper Restriction of Operations within the Bounds of a Memory Buffer issue was discovered in GE D60 Line Distance Relay devices running firmware Version 7.11 and prior. The SSH functions of the device are vulnerable to buffer overflow conditions that may allow a remote attacker to execute arbitrary code on the device.
CVE-2018-5413 Imperva SecureSphere running v13.0, v12.0, or v11.5 allows low privileged users to add SSH login keys to the admin user, resulting in privilege escalation.
CVE-2018-5399 The Auto-Maskin DCU 210E firmware contains an undocumented Dropbear SSH server, v2015.55, configured to listen on Port 22 while the DCU is running. The Dropbear server is configured with a hard-coded user name and password combination of root / amroot. The server is configured to use password only authentication not cryptographic keys, however the firmware image contains an RSA host-key for the server. An attacker can exploit this vulnerability to gain root access to the Angstrom Linux operating system and modify any binaries or configuration files in the firmware. Affected releases are Auto-Maskin DCU-210E RP-210E: Versions prior to 3.7 on ARMv7.
CVE-2018-5314 Command injection vulnerability in Citrix NetScaler ADC and NetScaler Gateway 11.0 before build 70.16, 11.1 before build 55.13, and 12.0 before build 53.13; and the NetScaler Load Balancing instance distributed with NetScaler SD-WAN/CloudBridge 4000, 4100, 5000 and 5100 WAN Optimization Edition 9.3.0 allows remote attackers to execute a system command or read arbitrary files via an SSH login prompt.
CVE-2018-20799 In pfSense 2.4.4_1, blocking of source IP addresses on the basis of failed HTTPS authentication is inconsistent with blocking of source IP addresses on the basis of failed SSH authentication (the behavior does not match the sshguard documentation), which might make it easier for attackers to bypass intended access restrictions.
CVE-2018-20685 In OpenSSH 7.9, scp.c in the scp client allows remote SSH servers to bypass intended access restrictions via the filename of . or an empty filename. The impact is modifying the permissions of the target directory on the client side.
CVE-2018-1999036 An exposure of sensitive information vulnerability exists in Jenkins SSH Agent Plugin 1.15 and earlier in SSHAgentStepExecution.java that exposes the SSH private key password to users with permission to read the build log.
CVE-2018-19589 Incorrect Access Controls of Security Officer (SO) in PKCS11 R2 provider that ships with the Utimaco CryptoServer HSM product package allows an SO authenticated to a slot to retrieve attributes of keys marked as private keys in external key storage, and also delete keys marked as private keys in external key storage. This compromises the availability of all keys configured with external key storage and may result in an economic attack in which the attacker denies legitimate users access to keys while maintaining possession of an encrypted copy (blob) of the external key store for ransom. This attack has been dubbed reverse ransomware attack and may be executed via a physical connection to the CryptoServer or remote connection if SSH or remote access to LAN CryptoServer has been compromised. The Confidentiality and Integrity of the affected keys, however, remain untarnished.
CVE-2018-19518 University of Washington IMAP Toolkit 2007f on UNIX, as used in imap_open() in PHP and other products, launches an rsh command (by means of the imap_rimap function in c-client/imap4r1.c and the tcp_aopen function in osdep/unix/tcp_unix.c) without preventing argument injection, which might allow remote attackers to execute arbitrary OS commands if the IMAP server name is untrusted input (e.g., entered by a user of a web application) and if rsh has been replaced by a program with different argument semantics. For example, if rsh is a link to ssh (as seen on Debian and Ubuntu systems), then the attack can use an IMAP server name containing a "-oProxyCommand" argument.
CVE-2018-18772 CentOS-WebPanel.com (aka CWP) CentOS Web Panel through 0.9.8.740 allows CSRF via admin/index.php?module=send_ssh, as demonstrated by executing an arbitrary OS command.
CVE-2018-18473 A hidden backdoor on PATLITE NBM-D88N, NHL-3FB1, and NHL-3FV1N devices allows attackers to enable an SSH daemon via the "kankichi" or "kamiyo4" password to the _secret1.htm URI. Subsequently, the default password of root for the root account allows an attacker to conduct remote code execution and as a result take over the system.
CVE-2018-17873 An incorrect access control vulnerability in the FTP configuration of WiFiRanger devices with firmware version 7.0.8rc3 and earlier allows an attacker with adjacent network access to read the SSH Private Key and log in to the root account.
CVE-2018-17565 Shell Metacharacter Injection in the SSH configuration interface on Grandstream GXP16xx VoIP 1.0.4.128 phones allows attackers to execute arbitrary system commands and gain a root shell.
CVE-2018-16849 A flaw was found in openstack-mistral. By manipulating the SSH private key filename, the std.ssh action can be used to disclose the presence of arbitrary files within the filesystem of the executor running the action. Since std.ssh private_key_filename can take an absolute path, it can be used to assess whether or not a file exists on the executor's filesystem.
CVE-2018-16837 Ansible "User" module leaks any data which is passed on as a parameter to ssh-keygen. This could lean in undesirable situations such as passphrases credentials passed as a parameter for the ssh-keygen executable. Showing those credentials in clear text form for every user which have access just to the process list.
CVE-2018-16158 Eaton Power Xpert Meter 4000, 6000, and 8000 devices before 13.4.0.10 have a single SSH private key across different customers' installations and do not properly restrict access to this key, which makes it easier for remote attackers to perform SSH logins (to uid 0) via the PubkeyAuthentication option.
CVE-2018-15599 The recv_msg_userauth_request function in svr-auth.c in Dropbear through 2018.76 is prone to a user enumeration vulnerability because username validity affects how fields in SSH_MSG_USERAUTH messages are handled, a similar issue to CVE-2018-15473 in an unrelated codebase.
CVE-2018-15481 Improper input sanitization within the restricted administration shell on UCOPIA Wireless Appliance devices using firmware version 5.1.x before 5.1.13 allows authenticated remote attackers to escape the shell and escalate their privileges by adding a LocalCommand to the SSH configuration file in the user home folder.
CVE-2018-15462 A vulnerability in the TCP ingress handler for the data interfaces that are configured with management access to Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an increase in CPU and memory usage, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient ingress TCP rate limiting for TCP ports 22 (SSH) and 443 (HTTPS). An attacker could exploit this vulnerability by sending a crafted, steady stream of TCP traffic to port 22 or 443 on the data interfaces that are configured with management access to the affected device.
CVE-2018-15399 A vulnerability in the TCP syslog module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust the 1550-byte buffers on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing boundary check in an internal function. An attacker could exploit this vulnerability by establishing a man-in-the-middle position between an affected device and its configured TCP syslog server and then maliciously modifying the TCP header in segments that are sent from the syslog server to the affected device. A successful exploit could allow the attacker to exhaust buffer on the affected device and cause all TCP-based features to stop functioning, resulting in a DoS condition. The affected TCP-based features include AnyConnect SSL VPN, clientless SSL VPN, and management connections such as Secure Shell (SSH), Telnet, and HTTPS.
CVE-2018-14441 An issue was discovered in cckevincyh SSH CompanyWebsite through 2018-05-03. admin/admin/fileUploadAction_fileUpload.action allows arbitrary file upload, as demonstrated by a .jsp file with the image/jpeg content type.
CVE-2018-14440 An issue was discovered in cckevincyh SSH CompanyWebsite through 2018-05-03. SQL injection exists via the admin/noticeManageAction_queryNotice.action noticeInfo parameter.
CVE-2018-13802 A vulnerability has been identified in ROX II (All versions < V2.12.1). An authenticated attacker with a high-privileged user account access via SSH could circumvent restrictions in place and execute arbitrary operating system commands. Successful exploitation requires that the attacker has network access to the SSH interface in on port 22/tcp. The attacker must be authenticated to exploit the vulnerability. The vulnerability could allow an attacker to execute arbitrary code on the device.
CVE-2018-1352 A format string vulnerability in Fortinet FortiOS 5.6.0 allows attacker to execute unauthorized code or commands via the SSH username variable.
CVE-2018-12338 Undocumented Factory Backdoor in ECOS System Management Appliance (aka SMA) 5.2.68 allows the vendor to extract confidential information and manipulate security relevant configurations via remote root SSH access.
CVE-2018-12336 Undocumented Factory Backdoor in ECOS Secure Boot Stick (aka SBS) 5.6.5 allows the vendor to extract confidential information via remote root SSH access.
CVE-2018-11786 In Apache Karaf prior to 4.2.0 release, if the sshd service in Karaf is left on so an administrator can manage the running instance, any user with rights to the Karaf console can pivot and read/write any file on the file system to which the Karaf process user has access. This can be locked down a bit by using chroot to change the root directory to protect files outside of the Karaf install directory; it can be further locked down by defining a security manager policy that limits file system access to those directories beneath the Karaf home that are necessary for the system to run. However, this still allows anyone with ssh access to the Karaf process to read and write a large number of files as the Karaf process user.
CVE-2018-11752 Previous releases of the Puppet cisco_ios module output SSH session debug information including login credentials to a world readable file on every run. These issues have been resolved in the 0.4.0 release.
CVE-2018-11750 Previous releases of the Puppet cisco_ios module did not validate a host's identity before starting a SSH connection. As of the 0.4.0 release of cisco_ios, host key checking is enabled by default.
CVE-2018-10896 The default cloud-init configuration, in cloud-init 0.6.2 and newer, included "ssh_deletekeys: 0", disabling cloud-init's deletion of ssh host keys. In some environments, this could lead to instances created by cloning a golden master or template system, sharing ssh host keys, and being able to impersonate one another or conduct man-in-the-middle attacks.
CVE-2018-10575 An issue was discovered on WatchGuard AP100, AP102, and AP200 devices with firmware before 1.2.9.15. Hardcoded credentials exist for an unprivileged SSH account with a shell of /bin/false.
CVE-2018-10532 An issue was discovered on EE 4GEE HH70VB-2BE8GB3 HH70_E1_02.00_19 devices. Hardcoded root SSH credentials were discovered to be stored within the "core_app" binary utilised by the EE router for networking services. An attacker with knowledge of the default password (oelinux123) could login to the router via SSH as the root user, which could allow for the loss of confidentiality, integrity, and availability of the system. This would also allow for the bypass of the "AP Isolation" mode that is supported by the router, as well as the settings for multiple Wireless networks, which a user may use for guest clients.
CVE-2018-10242 Suricata version 4.0.4 incorrectly handles the parsing of the SSH banner. A malformed SSH banner can cause the parsing code to read beyond the allocated data because SSHParseBanner in app-layer-ssh.c lacks a length check.
CVE-2018-10024 ubiQuoss Switch VP5208A creates a bcm_password file at /cgi-bin/ with the user credentials in cleartext when a failed login attempt occurs. The file can be reached via an HTTP request. The credentials can be used to access the system via SSH (or TELNET if it is enabled).
CVE-2018-1000805 Paramiko version 2.4.1, 2.3.2, 2.2.3, 2.1.5, 2.0.8, 1.18.5, 1.17.6 contains a Incorrect Access Control vulnerability in SSH server that can result in RCE. This attack appear to be exploitable via network connectivity.
CVE-2018-1000601 A arbitrary file read vulnerability exists in Jenkins SSH Credentials Plugin 1.13 and earlier in BasicSSHUserPrivateKey.java that allows attackers with a Jenkins account and the permission to configure credential bindings to read arbitrary files from the Jenkins master file system.
CVE-2018-0710 Command injection vulnerability in SSH of QNAP Q'center Virtual Appliance version 1.7.1063 and earlier could allow authenticated users to run arbitrary commands.
CVE-2018-0484 A vulnerability in the access control logic of the Secure Shell (SSH) server of Cisco IOS and IOS XE Software may allow connections sourced from a virtual routing and forwarding (VRF) instance despite the absence of the vrf-also keyword in the access-class configuration. The vulnerability is due to a missing check in the SSH server. An attacker could use this vulnerability to open an SSH connection to an affected Cisco IOS or IOS XE device with a source address belonging to a VRF instance. Once connected, the attacker would still need to provide valid credentials to access the device.
CVE-2018-0294 A vulnerability in the write-erase feature of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to configure an unauthorized administrator account for an affected device. The vulnerability exists because the affected software does not properly delete sensitive files when certain CLI commands are used to clear the device configuration and reload a device. An attacker could exploit this vulnerability by logging into an affected device as an administrative user and configuring an unauthorized account for the device. The account would not require a password for authentication and would be accessible only via a Secure Shell (SSH) connection to the device. A successful exploit could allow the attacker to configure an unauthorized account that has administrative privileges, does not require a password for authentication, and does not appear in the running configuration or the audit logs for the affected device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3500 Platform Switches, Nexus 4000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd13993, CSCvd34845, CSCvd34857, CSCvd34862, CSCvd34879, CSCve35753.
CVE-2018-0226 A vulnerability in the assignment and management of default user accounts for Secure Shell (SSH) access to Cisco Aironet 1800, 2800, and 3800 Series Access Points that are running Cisco Mobility Express Software could allow an authenticated, remote attacker to gain elevated privileges on an affected access point. The vulnerability exists because the Cisco Mobility Express controller of the affected software configures the default SSH user account for an access point to be the first SSH user account that was created for the Mobility Express controller, if an administrator added user accounts directly to the controller instead of using the default configuration or the SSH username creation wizard. Although the user account has read-only privileges for the Mobility Express controller, the account could have administrative privileges for an associated access point. An attacker who has valid user credentials for an affected controller could exploit this vulnerability by using the default SSH user account to authenticate to an affected access point via SSH. A successful exploit could allow the attacker to log in to the affected access point with administrative privileges and perform arbitrary administrative actions. This vulnerability affects the following Cisco products: Aironet 1800 Series Access Points that are running Cisco Mobility Express Software Releases 8.2.121.0 through 8.5.105.0, Aironet 2800 Series Access Points that are running Cisco Mobility Express Software Releases 8.3.102.0 through 8.5.105.0, Aironet 3800 Series Access Points that are running Cisco Mobility Express Software Releases 8.3.102.0 through 8.5.105.0. Cisco Bug IDs: CSCva68116.
CVE-2018-0141 A vulnerability in Cisco Prime Collaboration Provisioning (PCP) Software 11.6 could allow an unauthenticated, local attacker to log in to the underlying Linux operating system. The vulnerability is due to a hard-coded account password on the system. An attacker could exploit this vulnerability by connecting to the affected system via Secure Shell (SSH) using the hard-coded credentials. A successful exploit could allow the attacker to access the underlying operating system as a low-privileged user. After low-level privileges are gained, the attacker could elevate to root privileges and take full control of the device. Cisco Bug IDs: CSCvc82982.
CVE-2018-0044 An insecure SSHD configuration in Juniper Device Manager (JDM) and host OS on Juniper NFX Series devices may allow remote unauthenticated access if any of the passwords on the system are empty. The affected SSHD configuration has the PermitEmptyPasswords option set to "yes". Affected releases are Juniper Networks Junos OS: 18.1 versions prior to 18.1R4 on NFX Series.
CVE-2018-0035 QFX5200 and QFX10002 devices that have been shipped with Junos OS 15.1X53-D21, 15.1X53-D30, 15.1X53-D31, 15.1X53-D32, 15.1X53-D33 and 15.1X53-D60 or have been upgraded to these releases using the .bin or .iso images may contain an unintended additional Open Network Install Environment (ONIE) partition. This additional partition allows the superuser to reboot to the ONIE partition which will wipe out the content of the Junos partition and its configuration. Once rebooted, the ONIE partition will not have root password configured, thus any user can access the console or SSH, using an IP address acquired from DHCP, as root without password. Once the device has been shipped or upgraded with the ONIE partition installed, the issue will persist. Simply upgrading to higher release via the CLI will not resolve the issue. No other Juniper Networks products or platforms are affected by this issue.
CVE-2018-0010 A vulnerability in the Juniper Networks Junos Space Security Director allows a user who does not have SSH access to a device to reuse the URL that was created for another user to perform SSH access. Affected releases are all versions of Junos Space Security Director prior to 17.2R1.
CVE-2017-9800 A maliciously constructed svn+ssh:// URL would cause Subversion clients before 1.8.19, 1.9.x before 1.9.7, and 1.10.0.x through 1.10.0-alpha3 to run an arbitrary shell command. Such a URL could be generated by a malicious server, by a malicious user committing to a honest server (to attack another user of that server's repositories), or by a proxy server. The vulnerability affects all clients, including those that use file://, http://, and plain (untunneled) svn://.
CVE-2017-9626 Systems using the Marel Food Processing Systems Pluto platform do not restrict remote access. Marel has created an update for Pluto-based applications. This update will restrict remote access by implementing SSH authentication.
CVE-2017-9387 An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a shell script called relay.sh which is used for creating new SSH relays for the device so that the device connects to Vera servers. All the parameters passed in this specific script are logged to a log file called log.relay in the /tmp folder. The user can also read all the log files from the device using a script called log.sh. However, when the script loads the log files it displays them with content-type text/html and passes all the logs through the ansi2html binary which converts all the character text including HTML meta-characters correctly to be displayed in the browser. This allows an attacker to use the log files as a storing mechanism for the XSS payload and thus whenever a user navigates to that log.sh script, it enables the XSS payload and allows an attacker to execute his malicious payload on the user's browser.
CVE-2017-9137 Ceragon FibeAir IP-10 wireless radios through 7.2.0 have a default password of mateidu for the mateidu account (a hidden user account established by the vendor). This account can be accessed via both the web interface and SSH. In the web interface, this simply grants an attacker read-only access to the device's settings. However, when using SSH, this gives an attacker access to a Linux shell. NOTE: the vendor has commented "The mateidu user is a known user, which is mentioned in the FibeAir IP-10 User Guide. Customers are instructed to change the mateidu user password. Changing the user password fully solves the vulnerability."
CVE-2017-9079 Dropbear before 2017.75 might allow local users to read certain files as root, if the file has the authorized_keys file format with a command= option. This occurs because ~/.ssh/authorized_keys is read with root privileges and symlinks are followed.
CVE-2017-9001 Aruba ClearPass 6.6.3 and later includes a feature called "SSH Lockout", which causes ClearPass to lock accounts with too many login failures through SSH. When this feature is enabled, an unauthenticated remote command execution vulnerability is present which could allow an unauthenticated user to execute arbitrary commands on the underlying operating system with "root" privilege level. This vulnerability is only present when a specific feature has been enabled. The SSH Lockout feature is not enabled by default, so only systems which have enabled this feature are vulnerable.
CVE-2017-8109 The salt-ssh minion code in SaltStack Salt 2016.11 before 2016.11.4 copied over configuration from the Salt Master without adjusting permissions, which might leak credentials to local attackers on configured minions (clients).
CVE-2017-7722 In SolarWinds Log & Event Manager (LEM) before 6.3.1 Hotfix 4, a menu system is encountered when the SSH service is accessed with "cmc" and "password" (the default username and password). By exploiting a vulnerability in the restrictssh feature of the menuing script, an attacker can escape from the restricted shell.
CVE-2017-6900 An issue was discovered in Riello NetMan 204 14-2 and 15-2. The issue is with the login script and wrongpass Python script used for authentication. When calling wrongpass, the variables $VAL0 and $VAL1 should be enclosed in quotes to prevent the potential for Bash command injection. Further to this, VAL0 and VAL1 should be sanitised to ensure they do not contain malicious characters. Passing it the username of '-' will cause it to time out and log the user in because of poor error handling. This will log the attacker in as an administrator where the telnet / ssh services can be enabled, and the credentials for local users can be reset. Also, login.cgi accepts the username as a GET parameter, so login can be achieved by browsing to the /cgi-bin/login.cgi?username=-%20a URI.
CVE-2017-6767 A vulnerability in Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, remote attacker to gain higher privileges than the account is assigned. The attacker will be granted the privileges of the last user to log in, regardless of whether those privileges are higher or lower than what should have been granted. The attacker cannot gain root-level privileges. The vulnerability is due to a limitation with how Role-Based Access Control (RBAC) grants privileges to remotely authenticated users when login occurs via SSH directly to the local management interface of the APIC. An attacker could exploit this vulnerability by authenticating to the targeted device. The attacker's privilege level will be modified to match that of the last user to log in via SSH. An exploit could allow the attacker to gain elevated privileges and perform CLI commands that should be restricted by the attacker's configured role. Cisco Bug IDs: CSCvc34335. Known Affected Releases: 1.0(1e), 1.0(1h), 1.0(1k), 1.0(1n), 1.0(2j), 1.0(2m), 1.0(3f), 1.0(3i), 1.0(3k), 1.0(3n), 1.0(4h), 1.0(4o); 1.1(0.920a), 1.1(1j), 1.1(3f); 1.2 Base, 1.2(2), 1.2(3), 1.2.2; 1.3(1), 1.3(2), 1.3(2f); 2.0 Base, 2.0(1).
CVE-2017-6720 A vulnerability in the Secure Shell (SSH) subsystem of Cisco Small Business Managed Switches software could allow an authenticated, remote attacker to cause a reload of the affected switch, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of SSH connections. An attacker could exploit this vulnerability by logging in to an affected switch via SSH and sending a malicious SSH message. This vulnerability affects the following Cisco products when SSH is enabled: Small Business 300 Series Managed Switches, Small Business 500 Series Stackable Managed Switches, 350 Series Managed Switches, 350X Series Stackable Managed Switches, 550X Series Stackable Managed Switches, ESW2 Series Advanced Switches. Cisco Bug IDs: CSCvb48377.
CVE-2017-6679 The Cisco Umbrella Virtual Appliance Version 2.0.3 and prior contained an undocumented encrypted remote support tunnel (SSH) which auto initiated from the customer's appliance to Cisco's SSH Hubs in the Umbrella datacenters. These tunnels were primarily leveraged for remote support and allowed for authorized/authenticated personnel from the Cisco Umbrella team to access the appliance remotely and obtain full control without explicit customer approval. To address this vulnerability, the Umbrella Virtual Appliance version 2.1.0 now requires explicit customer approval before an SSH tunnel from the VA to the Cisco terminating server can be established.
CVE-2017-6542 The ssh_agent_channel_data function in PuTTY before 0.68 allows remote attackers to have unspecified impact via a large length value in an agent protocol message and leveraging the ability to connect to the Unix-domain socket representing the forwarded agent connection, which trigger a buffer overflow.
CVE-2017-6131 In some circumstances, an F5 BIG-IP version 12.0.0 to 12.1.2 and 13.0.0 Azure cloud instance may contain a default administrative password which could be used to remotely log into the BIG-IP system. The impacted administrative account is the Azure instance administrative user that was created at deployment. The root and admin accounts are not vulnerable. An attacker may be able to remotely access the BIG-IP host via SSH.
CVE-2017-6128 An attacker may be able to cause a denial-of-service (DoS) attack against the sshd component in F5 BIG-IP, Enterprise Manager, BIG-IQ, and iWorkflow.
CVE-2017-5803 A Remote Disclosure of Information vulnerability in HPE NonStop Servers using SSH Service version L series: T0801L02 through T0801L02^ABX; J and H series: T0801H01 through T0801H01^ACA was found.
CVE-2017-5544 An issue was discovered on FiberHome Fengine S5800 switches V210R240. An unauthorized attacker can access the device's SSH service, using a password cracking tool to establish SSH connections quickly. This will trigger an increase in the SSH login timeout (each of the login attempts will occupy a connection slot for a longer time). Once this occurs, legitimate login attempts via SSH/telnet will be refused, resulting in a denial of service; you must restart the device.
CVE-2017-5243 The default SSH configuration in Rapid7 Nexpose hardware appliances shipped before June 2017 does not specify desired algorithms for key exchange and other important functions. As a result, it falls back to allowing ALL algorithms supported by the relevant version of OpenSSH and makes the installations vulnerable to a range of MITM, downgrade, and decryption attacks.
CVE-2017-5200 Salt-api in SaltStack Salt before 2015.8.13, 2016.3.x before 2016.3.5, and 2016.11.x before 2016.11.2 allows arbitrary command execution on a salt-master via Salt's ssh_client.
CVE-2017-3879 A Denial of Service vulnerability in the remote login functionality for Cisco NX-OS Software running on Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to cause a process used for login to terminate unexpectedly and the login attempt to fail. There is no impact to user traffic flowing through the device. The attacker could use either a Telnet or an SSH client for the remote login attempt. Affected Products: This vulnerability affects Cisco Nexus 9000 Series Switches that are running Cisco NX-OS Software and are configured to allow remote Telnet connections to the device. More Information: CSCuy25824. Known Affected Releases: 7.0(3)I3(1) 8.3(0)CV(0.342) 8.3(0)CV(0.345). Known Fixed Releases: 8.3(0)CV(0.362) 8.0(1) 7.0(3)IED5(0.19) 7.0(3)IED5(0) 7.0(3)I4(1) 7.0(3)I4(0.8) 7.0(3)I2(2e) 7.0(3)F1(1.22) 7.0(3)F1(1) 7.0(3)F1(0.230).
CVE-2017-3834 A vulnerability in Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points running Cisco Mobility Express Software could allow an unauthenticated, remote attacker to take complete control of an affected device. The vulnerability is due to the existence of default credentials for an affected device that is running Cisco Mobility Express Software, regardless of whether the device is configured as a master, subordinate, or standalone access point. An attacker who has layer 3 connectivity to an affected device could use Secure Shell (SSH) to log in to the device with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points that are running an 8.2.x release of Cisco Mobility Express Software prior to Release 8.2.111.0, regardless of whether the device is configured as a master, subordinate, or standalone access point. Release 8.2 was the first release of Cisco Mobility Express Software for next generation Cisco Aironet Access Points. Cisco Bug IDs: CSCva50691.
CVE-2017-3819 A privilege escalation vulnerability in the Secure Shell (SSH) subsystem in the StarOS operating system for Cisco ASR 5000 Series, ASR 5500 Series, ASR 5700 Series devices, and Cisco Virtualized Packet Core could allow an authenticated, remote attacker to gain unrestricted, root shell access. The vulnerability is due to missing input validation of parameters passed during SSH or SFTP login. An attacker could exploit this vulnerability by providing crafted user input to the SSH or SFTP command-line interface (CLI) during SSH or SFTP login. An exploit could allow an authenticated attacker to gain root privileges access on the router. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered via both IPv4 and IPv6 traffic. An established TCP connection toward port 22, the SSH default port, is needed to perform the attack. The attacker must have valid credentials to login to the system via SSH or SFTP. The following products have been confirmed to be vulnerable: Cisco ASR 5000/5500/5700 Series devices running StarOS after 17.7.0 and prior to 18.7.4, 19.5, and 20.2.3 with SSH configured are vulnerable. Cisco Virtualized Packet Core - Single Instance (VPC-SI) and Distributed Instance (VPC-DI) devices running StarOS prior to N4.2.7 (19.3.v7) and N4.7 (20.2.v0) with SSH configured are vulnerable. Cisco Bug IDs: CSCva65853.
CVE-2017-3765 In Enterprise Networking Operating System (ENOS) in Lenovo and IBM RackSwitch and BladeCenter products, an authentication bypass known as "HP Backdoor" was discovered during a Lenovo security audit in the serial console, Telnet, SSH, and Web interfaces. This bypass mechanism can be accessed when performing local authentication under specific circumstances. If exploited, admin-level access to the switch is granted.
CVE-2017-3204 The Go SSH library (x/crypto/ssh) by default does not verify host keys, facilitating man-in-the-middle attacks. Default behavior changed in commit e4e2799 to require explicitly registering a hostkey verification mechanism.
CVE-2017-2648 It was found that jenkins-ssh-slaves-plugin before version 1.15 did not perform host key verification, thereby enabling Man-in-the-Middle attacks.
CVE-2017-18014 An NC-25986 issue was discovered in the Logging subsystem of Sophos XG Firewall with SFOS before 17.0.3 MR3. An unauthenticated user can trigger a persistent XSS vulnerability found in the WAF log page (Control Center -> Log Viewer -> in the filter option "Web Server Protection") in the webadmin interface, and execute any action available to the webadmin of the firewall (e.g., creating a new user, enabling SSH, or adding an SSH authorized key). The WAF log page will execute the "User-Agent" parameter in the HTTP POST request.
CVE-2017-18001 Trustwave Secure Web Gateway (SWG) through 11.8.0.27 allows remote attackers to append an arbitrary public key to the device's SSH Authorized Keys data, and consequently obtain remote root access, via the publicKey parameter to the /sendKey URI.
CVE-2017-17877 An issue was discovered in Valve Steam Link build 643. When the SSH daemon is enabled for local development, the device is publicly available via IPv6 TCP port 22 over the internet (with stateless address autoconfiguration) by default, which makes it easier for remote attackers to obtain access by guessing 24 bits of the MAC address and attempting a root login. This can be exploited in conjunction with CVE-2017-17878.
CVE-2017-17831 GitHub Git LFS before 2.1.1 allows remote attackers to execute arbitrary commands via an ssh URL with an initial dash character in the hostname, located on a "url =" line in a .lfsconfig file within a repository.
CVE-2017-17459 http_transport.c in Fossil before 2.4, when the SSH sync protocol is used, allows user-assisted remote attackers to execute arbitrary commands via an ssh URL with an initial dash character in the hostname, a related issue to CVE-2017-9800, CVE-2017-12836, CVE-2017-12976, CVE-2017-14176, CVE-2017-16228, CVE-2017-1000116, and CVE-2017-1000117.
CVE-2017-16228 Dulwich before 0.18.5, when an SSH subprocess is used, allows remote attackers to execute arbitrary commands via an ssh URL with an initial dash character in the hostname, a related issue to CVE-2017-9800, CVE-2017-12836, CVE-2017-12976, CVE-2017-1000116, and CVE-2017-1000117.
CVE-2017-16206 The cofee-script module exfiltrates sensitive data such as a user's private SSH key and bash history to a third party server during installation.
CVE-2017-16205 The coffescript module exfiltrates sensitive data such as a user's private SSH key and bash history to a third party server during installation.
CVE-2017-16204 The jquey module exfiltrates sensitive data such as a user's private SSH key and bash history to a third party server during installation.
CVE-2017-16203 The coffe-script module exfiltrates sensitive data such as a user's private SSH key and bash history to a third party server during installation.
CVE-2017-16202 The cofeescript module exfiltrates sensitive data such as a user's private SSH key and bash history to a third party server during installation.
CVE-2017-15271 A use-after-free issue could be triggered remotely in the SFTP component of PSFTPd 10.0.4 Build 729. This issue could be triggered prior to authentication. The PSFTPd server did not automatically restart, which enabled attackers to perform a very effective DoS attack against this service. By sending a crafted SSH identification / version string to the server, a NULL pointer dereference could be caused, apparently because of a race condition in the window message handling, performing the cleanup for invalid connections. This incorrect cleanup code has a use-after-free.
CVE-2017-14728 An authentication bypass was found in an unknown area of the SiteOmat source code. All SiteOmat BOS versions are affected, prior to the submission of this exploit. Also, the SiteOmat does not force administrators to switch passwords, leaving SSH and HTTP remote authentication open to public.
CVE-2017-14459 An exploitable OS Command Injection vulnerability exists in the Telnet, SSH, and console login functionality of Moxa AWK-3131A Industrial IEEE 802.11a/b/g/n wireless AP/bridge/client in firmware versions 1.4 to 1.7 (current). An attacker can inject commands via the username parameter of several services (SSH, Telnet, console), resulting in remote, unauthenticated, root-level operating system command execution.
CVE-2017-14176 Bazaar through 2.7.0, when Subprocess SSH is used, allows remote attackers to execute arbitrary commands via a bzr+ssh URL with an initial dash character in the hostname, a related issue to CVE-2017-9800, CVE-2017-12836, CVE-2017-12976, CVE-2017-16228, CVE-2017-1000116, and CVE-2017-1000117.
CVE-2017-14115 The AT&T U-verse 9.2.2h0d83 firmware for the Arris NVG589 and NVG599 devices, when IP Passthrough mode is not used, configures ssh-permanent-enable WAN SSH logins to the remotessh account with the 5SaP9I26 password, which allows remote attackers to access a "Terminal shell v1.0" service, and subsequently obtain unrestricted root privileges, by establishing an SSH session and then entering certain shell metacharacters and BusyBox commands.
CVE-2017-12976 git-annex before 6.20170818 allows remote attackers to execute arbitrary commands via an ssh URL with an initial dash character in the hostname, as demonstrated by an ssh://-eProxyCommand= URL, a related issue to CVE-2017-9800, CVE-2017-12836, CVE-2017-1000116, and CVE-2017-1000117.
CVE-2017-12928 A hard-coded password of tecn0visi0n for the dlxuser account in TecnoVISION DLX Spot Player4 (all known versions) allows remote attackers to log in via SSH and escalate privileges to root access with the same credentials.
CVE-2017-12836 CVS 1.12.x, when configured to use SSH for remote repositories, might allow remote attackers to execute arbitrary code via a repository URL with a crafted hostname, as demonstrated by "-oProxyCommand=id;localhost:/bar."
CVE-2017-12426 GitLab Community Edition (CE) and Enterprise Edition (EE) before 8.17.8, 9.0.x before 9.0.13, 9.1.x before 9.1.10, 9.2.x before 9.2.10, 9.3.x before 9.3.10, and 9.4.x before 9.4.4 might allow remote attackers to execute arbitrary code via a crafted SSH URL in a project import.
CVE-2017-12299 A vulnerability exists in the process of creating default IP blocks during device initialization for Cisco ASA Next-Generation Firewall Services that could allow an unauthenticated, remote attacker to send traffic to the local IP address of the device, bypassing any filters that are configured to deny local IP management traffic. The vulnerability is due to an implementation error that exists in the process of creating default IP blocks when the device is initialized, and the way in which those IP blocks interact with user-configured filters for local IP management traffic (for example, SSH to the device). An attacker could exploit this vulnerability by sending traffic to the local IP address of the targeted device. A successful exploit could allow the attacker to connect to the local IP address of the device even when there are filters configured to deny the traffic. Cisco Bug IDs: CSCvd97962.
CVE-2017-12261 A vulnerability in the restricted shell of the Cisco Identity Services Engine (ISE) that is accessible via SSH could allow an authenticated, local attacker to run arbitrary CLI commands with elevated privileges. The vulnerability is due to incomplete input validation of the user input for CLI commands issued at the restricted shell. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. An attacker would need valid user credentials to the device to exploit this vulnerability. The vulnerability affects the following Cisco Identity Services Engine (ISE) products running Release 1.4, 2.0, 2.0.1, 2.1.0: ISE, ISE Express, ISE Virtual Appliance. Cisco Bug IDs: CSCve74916.
CVE-2017-12084 A backdoor vulnerability exists in remote control functionality of Circle with Disney running firmware 2.0.1. A specific set of network packets can remotely start an SSH server on the device, resulting in a persistent backdoor. An attacker can send an API call to enable the SSH server.
CVE-2017-11361 Inteno routers have a JUCI ACL misconfiguration that allows the "user" account to read files, write to files, and add root SSH keys via JSON commands to ubus. (Exploitation is sometimes easy because the "user" password might be "user" or might match the Wi-Fi key.)
CVE-2017-11353 yadm (yet another dotfile manager) 1.10.0 has a race condition (related to the behavior of git commands in setting permissions for new files and directories), which potentially allows access to SSH and PGP keys.
CVE-2017-10615 A vulnerability in the pluggable authentication module (PAM) of Juniper Networks Junos OS may allow an unauthenticated network based attacker to potentially execute arbitrary code or crash daemons such as telnetd or sshd that make use of PAM. Affected Juniper Networks Junos OS releases are: 14.1 from 14.1R5 prior to 14.1R8-S4, 14.1R9; 14.1X53 prior to 14.1X53-D50 on EX and QFX series; 14.2 from 14.2R3 prior to 14.2R7-S8, 14.2R8; No other Junos OS releases are affected by this issue. No other Juniper Networks products are affected by this issue.
CVE-2017-10601 A specific device configuration can result in a commit failure condition. When this occurs, a user is logged in without being prompted for a password while trying to login through console, ssh, ftp, telnet or su, etc., This issue relies upon a device configuration precondition to occur. Typically, device configurations are the result of a trusted administrative change to the system's running configuration. The following error messages may be seen when this failure occurs: mgd: error: commit failed: (statements constraint check failed) Warning: Commit failed, activating partial configuration. Warning: Edit the router configuration to fix these errors. If the administrative changes are not made that result in such a failure, then this issue is not seen. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.3 prior to 12.3R10, 12.3R11; 12.3X48 prior to 12.3X48-D20; 13.2 prior to 13.2R8; 13.3 prior to 13.3R7; 14.1 prior to 14.1R4-S12, 14.1R5, 14.1R6; 14.1X53 prior to 14.1X53-D30; 14.2 prior to 14.2R4; 15.1 prior to 15.1F2, 15.1F3, 15.1R2.
CVE-2017-1000245 The SSH Plugin stores credentials which allow jobs to access remote servers via the SSH protocol. User passwords and passphrases for encrypted SSH keys are stored in plaintext in a configuration file.
CVE-2017-1000117 A malicious third-party can give a crafted "ssh://..." URL to an unsuspecting victim, and an attempt to visit the URL can result in any program that exists on the victim's machine being executed. Such a URL could be placed in the .gitmodules file of a malicious project, and an unsuspecting victim could be tricked into running "git clone --recurse-submodules" to trigger the vulnerability.
CVE-2017-1000116 Mercurial prior to 4.3 did not adequately sanitize hostnames passed to ssh, leading to possible shell-injection attacks.
CVE-2017-0932 Ubiquiti Networks EdgeOS version 1.9.1.1 and prior suffer from an Improper Privilege Management vulnerability due to the lack of validation on the input of the Feature functionality. An attacker with access to an operator (read-only) account and ssh connection to the devices could escalate privileges to admin (root) access in the system.
CVE-2016-9347 An issue was discovered in Emerson SE4801T0X Redundant Wireless I/O Card V13.3, and SE4801T1X Simplex Wireless I/O Card V13.3. DeltaV Wireless I/O Cards (WIOC) running the firmware available in the DeltaV system, release v13.3, have the SSH (Secure Shell) functionality enabled unnecessarily.
CVE-2016-9335 A hard-coded cryptographic key vulnerability was identified in Red Lion Controls Sixnet-Managed Industrial Switches running firmware Version 5.0.196 and Stride-Managed Ethernet Switches running firmware Version 5.0.190. Vulnerable versions of Stride-Managed Ethernet switches and Sixnet-Managed Industrial switches use hard-coded HTTP SSL/SSH keys for secure communication. Because these keys cannot be regenerated by users, all products use the same key. The attacker could disrupt communication or compromise the system. CVSS v3 base score: 10, CVSS vector string: (AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H). Red Lion Controls recommends updating to SLX firmware Version 5.3.174.
CVE-2016-8858 ** DISPUTED ** The kex_input_kexinit function in kex.c in OpenSSH 6.x and 7.x through 7.3 allows remote attackers to cause a denial of service (memory consumption) by sending many duplicate KEXINIT requests. NOTE: a third party reports that "OpenSSH upstream does not consider this as a security issue."
CVE-2016-8754 Huawei OceanStor 5600 V3 V300R003C00 has a hardcoded SSH key vulnerability; the hardcoded keys are used to encrypt communication data and authenticate different nodes of the devices. An attacker may obtain the hardcoded keys and log in to such a device through SSH.
CVE-2016-8613 A flaw was found in foreman 1.5.1. The remote execution plugin runs commands on hosts over SSH from the Foreman web UI. When a job is submitted that contains HTML tags, the console output shown in the web UI does not escape the output causing any HTML or JavaScript to run in the user's browser. The output of the job is stored, making this a stored XSS vulnerability.
CVE-2016-7456 VMware vSphere Data Protection (VDP) 5.5.x though 6.1.x has an SSH private key with a publicly known password, which makes it easier for remote attackers to obtain login access via an SSH session.
CVE-2016-7409 The dbclient and server in Dropbear SSH before 2016.74, when compiled with DEBUG_TRACE, allows local users to read process memory via the -v argument, related to a failed remote ident.
CVE-2016-7408 The dbclient in Dropbear SSH before 2016.74 allows remote attackers to execute arbitrary code via a crafted (1) -m or (2) -c argument.
CVE-2016-7407 The dropbearconvert command in Dropbear SSH before 2016.74 allows attackers to execute arbitrary code via a crafted OpenSSH key file.
CVE-2016-7406 Format string vulnerability in Dropbear SSH before 2016.74 allows remote attackers to execute arbitrary code via format string specifiers in the (1) username or (2) host argument.
CVE-2016-6838 Huawei X6800 and XH620 V3 servers with software before V100R003C00SPC606, RH1288 V3 servers with software before V100R003C00SPC613, RH2288 V3 servers with software before V100R003C00SPC617, CH140 V3 and CH226 V3 servers with software before V100R001C00SPC122, CH220 V3 servers with software before V100R001C00SPC201, and CH121 V3 and CH222 V3 servers with software before V100R001C00SPC202 might allow remote attackers to decrypt encrypted data and consequently obtain sensitive information by leveraging selection of an insecure SSH encryption algorithm.
CVE-2016-6515 The auth_password function in auth-passwd.c in sshd in OpenSSH before 7.3 does not limit password lengths for password authentication, which allows remote attackers to cause a denial of service (crypt CPU consumption) via a long string.
CVE-2016-6474 A vulnerability in the implementation of X.509 Version 3 for SSH authentication functionality in Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to bypass authentication on an affected system. More Information: CSCuv89417. Known Affected Releases: 15.5(2.25)T. Known Fixed Releases: 15.2(4)E1 15.2(4)E2 15.2(4)E3 15.2(4)EA4 15.2(4.0r)EB 15.2(4.1.27)EB 15.2(4.4.2)EA4 15.2(4.7.1)EC 15.2(4.7.2)EC 15.2(5.1.1)E 15.2(5.5.63)E 15.2(5.5.64)E 15.4(1)IA1.80 15.5(3)M1.1 15.5(3)M2 15.5(3)S1.4 15.5(3)S2 15.6(0.22)S0.12 15.6(1)T0.1 15.6(1)T1 15.6(1.15)T 15.6(1.17)S0.7 15.6(1.17)SP 15.6(1.22.1a)T0 15.6(2)S 15.6(2)SP 16.1(1.24) 16.1.2 16.2(0.247) 16.3(0.11) 3.8(1)E Denali-16.1.2.
CVE-2016-6393 The AAA service in Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.1 through 3.18 and 16.2 allows remote attackers to cause a denial of service (device reload) via a failed SSH connection attempt that is mishandled during generation of an error-log message, aka Bug ID CSCuy87667.
CVE-2016-6210 sshd in OpenSSH before 7.3, when SHA256 or SHA512 are used for user password hashing, uses BLOWFISH hashing on a static password when the username does not exist, which allows remote attackers to enumerate users by leveraging the timing difference between responses when a large password is provided.
CVE-2016-5333 VMware Photos OS OVA 1.0 before 2016-08-14 has a default SSH public key in an authorized_keys file, which allows remote attackers to obtain SSH access by leveraging knowledge of the private key.
CVE-2016-4996 discovery-debug in Foreman before 6.2 when the ssh service has been enabled on discovered nodes displays the root password in plaintext in the system journal when used to log in, which allows local users with access to the system journal to obtain the root password by reading the system journal, or by clicking Logs on the console.
CVE-2016-4927 Insufficient validation of SSH keys in Junos Space before 15.2R2 allows man-in-the-middle (MITM) type of attacks while a Space device is communicating with managed devices.
CVE-2016-3959 The Verify function in crypto/dsa/dsa.go in Go before 1.5.4 and 1.6.x before 1.6.1 does not properly check parameters passed to the big integer library, which might allow remote attackers to cause a denial of service (infinite loop) via a crafted public key to a program that uses HTTPS client certificates or SSH server libraries.
CVE-2016-3654 The device management command line interface (CLI) in Palo Alto Networks PAN-OS before 5.0.18, 5.1.x before 5.1.11, 6.0.x before 6.0.13, 6.1.x before 6.1.10, and 7.0.x before 7.0.5H2 allows remote authenticated administrators to execute arbitrary OS commands via an SSH command parameter.
CVE-2016-3116 CRLF injection vulnerability in Dropbear SSH before 2016.72 allows remote authenticated users to bypass intended shell-command restrictions via crafted X11 forwarding data.
CVE-2016-3115 Multiple CRLF injection vulnerabilities in session.c in sshd in OpenSSH before 7.2p2 allow remote authenticated users to bypass intended shell-command restrictions via crafted X11 forwarding data, related to the (1) do_authenticated1 and (2) session_x11_req functions.
CVE-2016-3067 Cygwin before 2.5.0 does not properly handle updating permissions when changing users, which allows attackers to gain privileges.
CVE-2016-2362 Fonality (previously trixbox Pro) 12.6 through 14.1i before 2016-06-01 has a hardcoded password for the FTP account, which allows remote attackers to obtain access via a (1) FTP or (2) SSH connection.
CVE-2016-2353 The Accellion File Transfer Appliance (FTA) before FTA_9_12_40 allows local users to add an SSH key to an arbitrary group, and consequently gain privileges, via unspecified vectors.
CVE-2016-2230 OpenELEC and RasPlex devices have a hardcoded password for the root account, which makes it easier for remote attackers to obtain access via an SSH session.
CVE-2016-2183 The DES and Triple DES ciphers, as used in the TLS, SSH, and IPSec protocols and other protocols and products, have a birthday bound of approximately four billion blocks, which makes it easier for remote attackers to obtain cleartext data via a birthday attack against a long-duration encrypted session, as demonstrated by an HTTPS session using Triple DES in CBC mode, aka a "Sweet32" attack.
CVE-2016-1984 The setUpSubtleUserAccount function in /bin/bw on Harman AMX devices before 2016-01-20 has a hardcoded password for the 1MB@tMaN account, which makes it easier for remote attackers to obtain access via a (1) SSH or (2) HTTP session, a different vulnerability than CVE-2015-8362.
CVE-2016-1909 Fortinet FortiAnalyzer before 5.0.12 and 5.2.x before 5.2.5; FortiSwitch 3.3.x before 3.3.3; FortiCache 3.0.x before 3.0.8; and FortiOS 4.1.x before 4.1.11, 4.2.x before 4.2.16, 4.3.x before 4.3.17 and 5.0.x before 5.0.8 have a hardcoded passphrase for the Fortimanager_Access account, which allows remote attackers to obtain administrative access via an SSH session.
CVE-2016-1908 The client in OpenSSH before 7.2 mishandles failed cookie generation for untrusted X11 forwarding and relies on the local X11 server for access-control decisions, which allows remote X11 clients to trigger a fallback and obtain trusted X11 forwarding privileges by leveraging configuration issues on this X11 server, as demonstrated by lack of the SECURITY extension on this X11 server.
CVE-2016-1907 The ssh_packet_read_poll2 function in packet.c in OpenSSH before 7.1p2 allows remote attackers to cause a denial of service (out-of-bounds read and application crash) via crafted network traffic.
CVE-2016-1561 ExaGrid appliances with firmware before 4.8 P26 have a default SSH public key in the authorized_keys file for root, which allows remote attackers to obtain SSH access by leveraging knowledge of a private key from another installation or a firmware image.
CVE-2016-1560 ExaGrid appliances with firmware before 4.8 P26 have a default password of (1) inflection for the root shell account and (2) support for the support account in the web interface, which allows remote attackers to obtain administrative access via an SSH or HTTP session.
CVE-2016-1426 Cisco IOS XR 5.x through 5.2.5 on NCS 6000 devices allows remote attackers to cause a denial of service (timer consumption and Route Processor reload) via crafted SSH traffic, aka Bug ID CSCux76819.
CVE-2016-1335 The SSH implementation in Cisco StarOS before 19.3.M0.62771 and 20.x before 20.0.M0.62768 on ASR 5000 devices mishandles a multi-user public-key authentication configuration, which allows remote authenticated users to gain privileges by establishing a connection from an endpoint that was previously used for an administrator's connection, aka Bug ID CSCux22492.
CVE-2016-1329 Cisco NX-OS 6.0(2)U6(1) through 6.0(2)U6(5) on Nexus 3000 devices and 6.0(2)A6(1) through 6.0(2)A6(5) and 6.0(2)A7(1) on Nexus 3500 devices has hardcoded credentials, which allows remote attackers to obtain root privileges via a (1) TELNET or (2) SSH session, aka Bug ID CSCuy25800.
CVE-2016-1313 Cisco UCS Invicta C3124SA Appliance 4.3.1 through 5.0.1, UCS Invicta Scaling System and Appliance, and Whiptail Racerunner improperly store a default SSH private key, which allows remote attackers to obtain root access via unspecified vectors, aka Bug ID CSCun71294.
CVE-2016-10708 sshd in OpenSSH before 7.4 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via an out-of-sequence NEWKEYS message, as demonstrated by Honggfuzz, related to kex.c and packet.c.
CVE-2016-10308 Siklu EtherHaul radios before 3.7.1 and 6.x before 6.9.0 have a built-in, hidden root account, with an unchangeable password that is the same across all devices. This account is accessible via both SSH and the device's web interface and grants access to the underlying embedded Linux OS on the device, allowing full control over it.
CVE-2016-10307 Trango ApexLynx 2.0, ApexOrion 2.0, GigaLynx 2.0, GigaOrion 2.0, and StrataLink 3.0 devices have a built-in, hidden root account, with a default password for which the MD5 hash value is public (but the cleartext value is perhaps not yet public). This account is accessible via SSH and/or TELNET, and grants access to the underlying embedded UNIX OS on the device, allowing full control over it.
CVE-2016-10306 Trango Altum AC600 devices have a built-in, hidden root account, with a default password of abcd1234. This account is accessible via SSH and/or TELNET, and grants access to the underlying embedded UNIX OS on the device, allowing full control over it.
CVE-2016-10305 Trango Apex <= 2.1.1, ApexLynx < 2.0, ApexOrion < 2.0, ApexPlus <= 3.2.0, Giga <= 2.6.1, GigaLynx < 2.0, GigaOrion < 2.0, GigaPlus <= 3.2.3, GigaPro <= 1.4.1, StrataLink < 3.0, and StrataPro devices have a built-in, hidden root account, with a default password that was once stored in cleartext within a software update package on a Trango FTP server. This account is accessible via SSH and/or TELNET, and grants access to the underlying embedded UNIX OS on the device, allowing full control over it.
CVE-2016-10177 An issue was discovered on the D-Link DWR-932B router. Undocumented TELNET and SSH services provide logins to admin with the password admin and root with the password 1234.
CVE-2016-10104 Information Disclosure can occur in sshProfiles.jsd in Hitek Software's Automize because of the Read attribute being set for Users. This allows an attacker to recover encrypted passwords for SSH/SFTP profiles. Verified in all 10.x versions up to and including 10.25, and all 11.x versions up to and including 11.14.
CVE-2016-10102 hitek.jar in Hitek Software's Automize uses weak encryption when encrypting SSH/SFTP and Encryption profile passwords. This allows an attacker to retrieve the encrypted passwords from sshProfiles.jsd and encryptionProfiles.jsd and decrypt them to recover cleartext passwords. All 10.x up to and including 10.25 and all 11.x up to and including 11.14 are verified to be affected.
CVE-2016-10012 The shared memory manager (associated with pre-authentication compression) in sshd in OpenSSH before 7.4 does not ensure that a bounds check is enforced by all compilers, which might allows local users to gain privileges by leveraging access to a sandboxed privilege-separation process, related to the m_zback and m_zlib data structures.
CVE-2016-10011 authfile.c in sshd in OpenSSH before 7.4 does not properly consider the effects of realloc on buffer contents, which might allow local users to obtain sensitive private-key information by leveraging access to a privilege-separated child process.
CVE-2016-10010 sshd in OpenSSH before 7.4, when privilege separation is not used, creates forwarded Unix-domain sockets as root, which might allow local users to gain privileges via unspecified vectors, related to serverloop.c.
CVE-2016-10009 Untrusted search path vulnerability in ssh-agent.c in ssh-agent in OpenSSH before 7.4 allows remote attackers to execute arbitrary local PKCS#11 modules by leveraging control over a forwarded agent-socket.
CVE-2016-0930 Pivotal Cloud Foundry (PCF) Ops Manager before 1.6.19 and 1.7.x before 1.7.10, when vCloud or vSphere is used, has a default password for compilation VMs, which allows remote attackers to obtain SSH access by connecting within an installation-time period during which these VMs exist.
CVE-2016-0897 Pivotal Cloud Foundry (PCF) Ops Manager before 1.6.17 and 1.7.x before 1.7.8, when vCloud or vSphere is used, does not properly enable SSH access for operators, which has unspecified impact and remote attack vectors.
CVE-2016-0787 The diffie_hellman_sha256 function in kex.c in libssh2 before 1.7.0 improperly truncates secrets to 128 or 256 bits, which makes it easier for man-in-the-middle attackers to decrypt or intercept SSH sessions via unspecified vectors, aka a "bits/bytes confusion bug."
CVE-2016-0778 The (1) roaming_read and (2) roaming_write functions in roaming_common.c in the client in OpenSSH 5.x, 6.x, and 7.x before 7.1p2, when certain proxy and forward options are enabled, do not properly maintain connection file descriptors, which allows remote servers to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact by requesting many forwardings.
CVE-2016-0777 The resend_bytes function in roaming_common.c in the client in OpenSSH 5.x, 6.x, and 7.x before 7.1p2 allows remote servers to obtain sensitive information from process memory by requesting transmission of an entire buffer, as demonstrated by reading a private key.
CVE-2016-0739 libssh before 0.7.3 improperly truncates ephemeral secrets generated for the (1) diffie-hellman-group1 and (2) diffie-hellman-group14 key exchange methods to 128 bits, which makes it easier for man-in-the-middle attackers to decrypt or intercept SSH sessions via unspecified vectors, aka a "bits/bytes confusion bug."
CVE-2015-8362 The setUpSubtleUserAccount function in /bin/bw on Harman AMX devices before 2015-10-12 has a hardcoded password for the BlackWidow account, which makes it easier for remote attackers to obtain access via a (1) SSH or (2) HTTP session, a different vulnerability than CVE-2016-1984.
CVE-2015-8325 The do_setup_env function in session.c in sshd in OpenSSH through 7.2p2, when the UseLogin feature is enabled and PAM is configured to read .pam_environment files in user home directories, allows local users to gain privileges by triggering a crafted environment for the /bin/login program, as demonstrated by an LD_PRELOAD environment variable.
CVE-2015-8251 OpenStage 60 and OpenScape Desk Phone IP 55G SIP V3, OpenStage 15, 20E, 20 and 40 and OpenScape Desk Phone IP 35G SIP V3, OpenScape Desk Phone IP 35G Eco SIP V3, OpenStage 60 and OpenScape Desk Phone IP 55G HFA V3, OpenStage 15, 20E, 20, and 40 and OpenScape Desk Phone IP 35G HFA V3, and OpenScape Desk Phone IP 35G Eco HFA V3 use non-unique X.509 certificates and SSH host keys.
CVE-2015-7845 The exception handling mechanism in the CLI Module in Huawei eSpace U1910, U1911, U1930, U1960, U1980, and U1981 unified gateways with software before V100R001C20SPH605 allows remote attackers to cause a denial of service (CLI outage) via crafted SSH packets.
CVE-2015-7760 libxpc in launchd in Apple OS X before 10.11 does not restrict the creation of processes for network connections, which allows remote attackers to cause a denial of service (resource consumption) by repeatedly connecting to the SSH port, a different vulnerability than CVE-2015-7761.
CVE-2015-7755 Juniper ScreenOS 6.2.0r15 through 6.2.0r18, 6.3.0r12 before 6.3.0r12b, 6.3.0r13 before 6.3.0r13b, 6.3.0r14 before 6.3.0r14b, 6.3.0r15 before 6.3.0r15b, 6.3.0r16 before 6.3.0r16b, 6.3.0r17 before 6.3.0r17b, 6.3.0r18 before 6.3.0r18b, 6.3.0r19 before 6.3.0r19b, and 6.3.0r20 before 6.3.0r21 allows remote attackers to obtain administrative access by entering an unspecified password during a (1) SSH or (2) TELNET session.
CVE-2015-7754 Juniper ScreenOS before 6.3.0r21, when ssh-pka is configured and enabled, allows remote attackers to cause a denial of service (system crash) or execute arbitrary code via crafted SSH negotiation.
CVE-2015-7752 The SSH server in Juniper Junos OS before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R10, 12.3X48 before 12.3X48-D10, 13.2 before 13.2R8, 13.2X51 before 13.2X51-D35, 13.3 before 13.3R6, 14.1 before 14.1R5, 14.1X53 before 14.1X53-D25, 14.2 before 14.2R3, 15.1 before 15.1R1, and 15.1X49 before 15.1X49-D20 allows remote attackers to cause a denial of service (CPU consumption) via unspecified SSH traffic.
CVE-2015-7289 Arris DG860A, TG862A, and TG862G devices with firmware TS0703128_100611 through TS0705125D_031115 have a hardcoded administrator password derived from a serial number, which makes it easier for remote attackers to obtain access via the web management interface, SSH, TELNET, or SNMP.
CVE-2015-7272 Dell Integrated Remote Access Controller (iDRAC) 6 before 2.80 and 7/8 before 2.21.21.21 allows attackers to cause a denial of service (buffer overflow) or possibly have unspecified other impact via a long SSH username or input.
CVE-2015-7256 ZyXEL NWA1100-N, NWA1100-NH, NWA1121-NI, NWA1123-AC, and NWA1123-NI access points; P-660HN-51, P-663HN-51, VMG1312-B10A, VMG1312-B30A, VMG1312-B30B, VMG4380-B10A, VMG8324-B10A, VMG8924-B10A, VMG8924-B30A, and VSG1435-B101 DSL CPEs; PMG5318-B20A GPONs; SBG3300-N000, SBG3300-NB00, and SBG3500-N000 small business gateways; GS1900-8 and GS1900-24 switches; and C1000Z, Q1000, FR1000Z, and P8702N project models use non-unique X.509 certificates and SSH host keys.
CVE-2015-7255 ZTE OX-330P, ZXHN H108N, W300V1.0.0S_ZRD_TR1_D68, HG110, GAN9.8T101A-B, MF28G, ZXHN H108N use non-unique X.509 certificates and SSH host keys, which might allow remote attackers to obtain credentials or other sensitive information via a man-in-the-middle attack, passive decryption attack, or impersonating a legitimate device.
CVE-2015-6565 sshd in OpenSSH 6.8 and 6.9 uses world-writable permissions for TTY devices, which allows local users to cause a denial of service (terminal disruption) or possibly have unspecified other impact by writing to a device, as demonstrated by writing an escape sequence.
CVE-2015-6564 Use-after-free vulnerability in the mm_answer_pam_free_ctx function in monitor.c in sshd in OpenSSH before 7.0 on non-OpenBSD platforms might allow local users to gain privileges by leveraging control of the sshd uid to send an unexpectedly early MONITOR_REQ_PAM_FREE_CTX request.
CVE-2015-6563 The monitor component in sshd in OpenSSH before 7.0 on non-OpenBSD platforms accepts extraneous username data in MONITOR_REQ_PAM_INIT_CTX requests, which allows local users to conduct impersonation attacks by leveraging any SSH login access in conjunction with control of the sshd uid to send a crafted MONITOR_REQ_PWNAM request, related to monitor.c and monitor_wrap.c.
CVE-2015-6476 Advantech EKI-122x-BE devices with firmware before 1.65, EKI-132x devices with firmware before 1.98, and EKI-136x devices with firmware before 1.27 have hardcoded SSH keys, which makes it easier for remote attackers to obtain access via an SSH session.
CVE-2015-6415 Cisco Unified Computing System (UCS) 2.2(3f)A on Fabric Interconnect 6200 devices allows remote attackers to cause a denial of service (CPU consumption or device outage) via a SYN flood on the SSH port during the booting process, aka Bug ID CSCuu81757.
CVE-2015-6412 Cisco Modular Encoding Platform D9036 Software before 02.04.70 has hardcoded (1) root and (2) guest passwords, which makes it easier for remote attackers to obtain access via an SSH session, aka Bug ID CSCut88070.
CVE-2015-6389 Cisco Prime Collaboration Assurance before 11.0 has a hardcoded cmuser account, which allows remote attackers to obtain access by establishing an SSH session and leveraging knowledge of this account's password, aka Bug ID CSCus62707.
CVE-2015-6367 Cisco Aironet 1800 devices with software 8.1(131.0) allow remote attackers to cause a denial of service (CPU consumption) by improperly establishing many SSHv2 connections, aka Bug ID CSCux13374.
CVE-2015-6358 Multiple Cisco embedded devices use hardcoded X.509 certificates and SSH host keys embedded in the firmware, which allows remote attackers to defeat cryptographic protection mechanisms and conduct man-in-the-middle attacks by leveraging knowledge of these certificates and keys from another installation, aka Bug IDs CSCuw46610, CSCuw46620, CSCuw46637, CSCuw46654, CSCuw46665, CSCuw46672, CSCuw46677, CSCuw46682, CSCuw46705, CSCuw46716, CSCuw46979, CSCuw47005, CSCuw47028, CSCuw47040, CSCuw47048, CSCuw47061, CSCuw90860, CSCuw90869, CSCuw90875, CSCuw90881, CSCuw90899, and CSCuw90913.
CVE-2015-6333 Cisco Application Policy Infrastructure Controller (APIC) 1.1j allows local users to gain privileges via vectors involving addition of an SSH key, aka Bug ID CSCuw46076.
CVE-2015-6316 The default configuration of sshd_config in Cisco Mobility Services Engine (MSE) through 8.0.120.7 allows logins by the oracle account, which makes it easier for remote attackers to obtain access by entering this account's hardcoded password in an SSH session, aka Bug ID CSCuv40501.
CVE-2015-6300 Cisco Secure Access Control Server (ACS) Solution Engine 5.7(0.15) allows remote authenticated users to cause a denial of service (SSH screen process crash) via crafted (1) CLI or (2) GUI commands, aka Bug ID CSCuw24694.
CVE-2015-6289 Cisco IOS 15.5(3)M on Integrated Services Router (ISR) 800, 819, and 829 devices allows remote attackers to cause a denial of service (memory consumption) via crafted TCP packets on the SSH port, aka Bug ID CSCuu13476.
CVE-2015-6280 The SSHv2 functionality in Cisco IOS 15.2, 15.3, 15.4, and 15.5 and IOS XE 3.6E before 3.6.3E, 3.7E before 3.7.1E, 3.10S before 3.10.6S, 3.11S before 3.11.4S, 3.12S before 3.12.3S, 3.13S before 3.13.3S, and 3.14S before 3.14.1S does not properly implement RSA authentication, which allows remote attackers to obtain login access by leveraging knowledge of a username and the associated public key, aka Bug ID CSCus73013.
CVE-2015-5600 The kbdint_next_device function in auth2-chall.c in sshd in OpenSSH through 6.9 does not properly restrict the processing of keyboard-interactive devices within a single connection, which makes it easier for remote attackers to conduct brute-force attacks or cause a denial of service (CPU consumption) via a long and duplicative list in the ssh -oKbdInteractiveDevices option, as demonstrated by a modified client that provides a different password for each pam element on this list.
CVE-2015-5352 The x11_open_helper function in channels.c in ssh in OpenSSH before 6.9, when ForwardX11Trusted mode is not used, lacks a check of the refusal deadline for X connections, which makes it easier for remote attackers to bypass intended access restrictions via a connection outside of the permitted time window.
CVE-2015-5259 Integer overflow in the read_string function in libsvn_ra_svn/marshal.c in Apache Subversion 1.9.x before 1.9.3 allows remote attackers to execute arbitrary code via an svn:// protocol string, which triggers a heap-based buffer overflow and an out-of-bounds read.
CVE-2015-5012 The SSH implementation on IBM Security Access Manager for Web appliances 7.0 before 7.0.0 FP19, 8.0 before 8.0.1.3 IF3, and 9.0 before 9.0.0.0 IF1 does not properly restrict the set of MAC algorithms, which makes it easier for remote attackers to defeat cryptographic protection mechanisms via unspecified vectors.
CVE-2015-4236 Cisco AsyncOS on Email Security Appliance (ESA) devices with software 8.5.6-073, 8.5.6-074, and 9.0.0-461, when clustering is enabled, allows remote attackers to cause a denial of service (clustering and SSH outage) via a packet flood, aka Bug IDs CSCur13704 and CSCuq05636.
CVE-2015-4217 The remote-support feature on Cisco Web Security Virtual Appliance (WSAv), Email Security Virtual Appliance (ESAv), and Security Management Virtual Appliance (SMAv) devices before 2015-06-25 uses the same default SSH host keys across different customers' installations, which makes it easier for remote attackers to defeat cryptographic protection mechanisms by leveraging knowledge of a private key from another installation, aka Bug IDs CSCus29681, CSCuu95676, and CSCuu96601.
CVE-2015-4216 The remote-support feature on Cisco Web Security Virtual Appliance (WSAv), Email Security Virtual Appliance (ESAv), and Security Management Virtual Appliance (SMAv) devices before 2015-06-25 uses the same default SSH root authorized key across different customers' installations, which makes it easier for remote attackers to bypass authentication by leveraging knowledge of a private key from another installation, aka Bug IDs CSCuu95988, CSCuu95994, and CSCuu96630.
CVE-2015-4196 Platform Software before 4.4.5 in Cisco Unified Communications Domain Manager (CDM) 8.x has a hardcoded password for a privileged account, which allows remote attackers to obtain root access by leveraging knowledge of this password and entering it in an SSH session, aka Bug ID CSCuq45546.
CVE-2015-4195 Cisco IOS XR 5.1.1.K9SEC allows remote authenticated users to cause a denial of service (vty error, and SSH and TELNET outage) via a crafted disconnect action within an SSH session, aka Bug ID CSCul63127.
CVE-2015-3960 The firmware in MNS before 4.5.6 on Belden GarrettCom Magnum 6K and Magnum 10K switches uses hardcoded RSA private keys and certificates across different customers' installations, which makes it easier for remote attackers to defeat cryptographic protection mechanisms for HTTPS sessions by leveraging knowledge of a private key from another installation.
CVE-2015-3170 selinux-policy when sysctl fs.protected_hardlinks are set to 0 allows local users to cause a denial of service (SSH login prevention) by creating a hardlink to /etc/passwd from a directory named .config, and updating selinux-policy.
CVE-2015-3146 The (1) SSH_MSG_NEWKEYS and (2) SSH_MSG_KEXDH_REPLY packet handlers in package_cb.c in libssh before 0.6.5 do not properly validate state, which allows remote attackers to cause a denial of service (NULL pointer dereference and crash) via a crafted SSH packet.
CVE-2015-2907 ** DISPUTED ** Mobile Devices (aka MDI) C4 OBD-II dongles with firmware 2.x and 3.4.x, as used in Metromile Pulse and other products, have hardcoded SSH credentials, which makes it easier for remote attackers to obtain access by leveraging knowledge of the required username and password. NOTE: the vendor states "This was a flaw for the developer/debugging devices (again not possible in production versions)."
CVE-2015-2906 ** DISPUTED ** Mobile Devices (aka MDI) C4 OBD-II dongles with firmware 2.x and 3.4.x, as used in Metromile Pulse and other products, store SSH private keys that are the same across different customers' installations, which makes it easier for remote attackers to obtain access by leveraging knowledge of a private key from another installation. NOTE: the vendor states "This was a flaw for the developer/debugging devices (again not possible in production versions)."
CVE-2015-2897 Sierra Wireless ALEOS before 4.4.2 on AirLink ES, GX, and LS devices has hardcoded root accounts, which makes it easier for remote attackers to obtain administrative access via a (1) SSH or (2) TELNET session.
CVE-2015-2157 The (1) ssh2_load_userkey and (2) ssh2_save_userkey functions in PuTTY 0.51 through 0.63 do not properly wipe SSH-2 private keys from memory, which allows local users to obtain sensitive information by reading the memory.
CVE-2015-2008 IBM Security QRadar SIEM 7.1.x before 7.1 MR2 Patch 12 and 7.2.x before 7.2.6 includes SSH private keys during backup operations, which allows remote authenticated administrators to obtain sensitive information by reading a backup archive.
CVE-2015-1782 The kex_agree_methods function in libssh2 before 1.5.0 allows remote servers to cause a denial of service (crash) or have other unspecified impact via crafted length values in an SSH_MSG_KEXINIT packet.
CVE-2015-1316 Juju Core's Joyent provider before version 1.25.5 uploads the user's private ssh key.
CVE-2015-0936 Ceragon FibeAir IP-10 have a default SSH public key in the authorized_keys file for the mateidu user, which allows remote attackers to obtain SSH access by leveraging knowledge of the private key.
CVE-2015-0924 Ceragon FibeAir IP-10 bridges have a default password for the root account, which makes it easier for remote attackers to obtain access via a (1) HTTP, (2) SSH, (3) TELNET, or (4) CLI session.
CVE-2015-0721 Cisco NX-OS 4.0 through 7.3 on Multilayer Director and Nexus 1000V, 2000, 3000, 3500, 4000, 5000, 5500, 5600, 6000, 7000, 7700, and 9000 devices allows remote authenticated users to bypass intended AAA restrictions and obtain privileged CLI access via crafted parameters in an SSH connection negotiation, aka Bug IDs CSCum35502, CSCuw78669, CSCuw79754, and CSCux88492.
CVE-2015-0667 The Management Interface on Cisco Content Services Switch (CSS) 11500 devices 8.20.4.02 and earlier allows remote attackers to bypass intended restrictions on local-network device access via crafted SSH packets, aka Bug ID CSCut14855.
CVE-2014-9563 CRLF injection vulnerability in the web-based management (WBM) interface in Unify (former Siemens) OpenStage SIP and OpenScape Desk Phone IP V3 devices before R3.32.0 allows remote authenticated users to modify the root password and consequently access the debug port using the serial interface via the ssh-password parameter to page.cmd.
CVE-2014-8779 Pexip Infinity before 8 uses the same SSH host keys across different customers' installations, which allows man-in-the-middle attackers to spoof Management and Conferencing Nodes by leveraging these keys.
CVE-2014-8572 Huawei AC6605 with software V200R001C00; AC6605 with software V200R002C00; ACU with software V200R001C00; ACU with software V200R002C00; S2300, S3300, S2700, S3700 with software V100R006C05 and earlier versions; S5300, S5700, S6300, S6700 with software V100R006, V200R001, V200R002, V200R003, V200R005C00SPC300 and earlier versions; S7700, S9300, S9300E, S9700 with software V100R006, V200R001, V200R002, V200R003, V200R005C00SPC300 and earlier versions could allow remote attackers to send a special SSH packet to the VRP device to cause a denial of service.
CVE-2014-8529 McAfee Network Data Loss Prevention (NDLP) before 9.3 stores the SSH key in cleartext, which allows local users to obtain sensitive information via unspecified vectors.
CVE-2014-8475 FreeBSD 9.1, 9.2, and 10.0, when compiling OpenSSH with Kerberos support, uses incorrect library ordering when linking sshd, which causes symbols to be resolved incorrectly and allows remote attackers to cause a denial of service (sshd deadlock and prevention of new connections) by ending multiple connections before authentication is completed.
CVE-2014-8428 Privilege escalation vulnerability in Barracuda Load Balancer 5.0.0.015 via the use of an improperly protected SSH key.
CVE-2014-8421 Unify (former Siemens) OpenStage SIP and OpenScape Desk Phone IP V3 devices before R3.32.0 allow remote attackers to gain super-user privileges by leveraging SSH access and incorrect ownership of (1) ConfigureCoreFile.sh, (2) Traceroute.sh, (3) apps.sh, (4) conversion_java2native.sh, (5) coreCompression.sh, (6) deletePasswd.sh, (7) findHealthSvcFDs.sh, (8) fw_printenv.sh, (9) fw_setenv.sh, (10) hw_wd_kicker.sh, (11) new_rootfs.sh, (12) opera_killSnmpd.sh, (13) opera_startSnmpd.sh, (14) rebootOperaSoftware.sh, (15) removeLogFiles.sh, (16) runOperaServices.sh, (17) setPasswd.sh, (18) startAccTestSvcs.sh, (19) usbNotification.sh, or (20) appWeb in /Opera_Deploy.
CVE-2014-8132 Double free vulnerability in the ssh_packet_kexinit function in kex.c in libssh 0.5.x and 0.6.x before 0.6.4 allows remote attackers to cause a denial of service via a crafted kexinit packet.
CVE-2014-7299 Unspecified vulnerability in administrative interfaces in ArubaOS 6.3.1.11, 6.3.1.11-FIPS, 6.4.2.1, and 6.4.2.1-FIPS on Aruba controllers allows remote attackers to bypass authentication, and obtain potentially sensitive information or add guest accounts, via an SSH session.
CVE-2014-7169 GNU Bash through 4.3 bash43-025 processes trailing strings after certain malformed function definitions in the values of environment variables, which allows remote attackers to write to files or possibly have unknown other impact via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-6271.
CVE-2014-6603 The SSHParseBanner function in SSH parser (app-layer-ssh.c) in Suricata before 2.0.4 allows remote attackers to bypass SSH rules, cause a denial of service (crash), or possibly have unspecified other impact via a crafted banner, which triggers a large memory allocation or an out-of-bounds write.
CVE-2014-6501 Unspecified vulnerability in Oracle Sun Solaris 11 allows local users to affect confidentiality via vectors related to SSH.
CVE-2014-6278 GNU Bash through 4.3 bash43-026 does not properly parse function definitions in the values of environment variables, which allows remote attackers to execute arbitrary commands via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-6271, CVE-2014-7169, and CVE-2014-6277.
CVE-2014-6277 GNU Bash through 4.3 bash43-026 does not properly parse function definitions in the values of environment variables, which allows remote attackers to execute arbitrary code or cause a denial of service (uninitialized memory access, and untrusted-pointer read and write operations) via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-6271 and CVE-2014-7169.
CVE-2014-6271 GNU Bash through 4.3 processes trailing strings after function definitions in the values of environment variables, which allows remote attackers to execute arbitrary code via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution, aka "ShellShock." NOTE: the original fix for this issue was incorrect; CVE-2014-7169 has been assigned to cover the vulnerability that is still present after the incorrect fix.
CVE-2014-5432 Baxter SIGMA Spectrum Infusion System version 6.05 (model 35700BAX) with wireless battery module (WBM) version 16 is remotely accessible via Port 22/SSH without authentication. A remote attacker may be able to make unauthorized configuration changes to the WBM, as well as issue commands to access account credentials and shared keys. Baxter asserts that this vulnerability only allows access to features and functionality on the WBM and that the SIGMA Spectrum infusion pump cannot be controlled from the WBM. Baxter has released a new version of the SIGMA Spectrum Infusion System, Version 8, which incorporates hardware and software changes.
CVE-2014-5394 Multiple Huawei Campus switches allow remote attackers to enumerate usernames via vectors involving use of SSH by the maintenance terminal.
CVE-2014-4826 IBM Security QRadar SIEM 7.2 before 7.2.3 Patch 1 does not properly handle SSH connections, which allows remote attackers to obtain sensitive cleartext information by sniffing the network.
CVE-2014-4749 IBM PowerVC 1.2.0 before FixPack3 does not properly use the known_hosts file, which allows man-in-the-middle attackers to spoof SSH servers via an arbitrary server key.
CVE-2014-4152 The av-centerd SOAP service in AlienVault OSSIM before 4.8.0 allows remote attackers to execute arbitrary code via a crafted remote_task request, related to injecting an ssh public key.
CVE-2014-3929 The default configuration for Cougar-LG stores sensitive information under the web root with insufficient access control, which might allow remote attackers to obtain private ssh keys.
CVE-2014-3563 Multiple unspecified vulnerabilities in Salt (aka SaltStack) before 2014.1.10 allow local users to have an unspecified impact via vectors related to temporary file creation in (1) seed.py, (2) salt-ssh, or (3) salt-cloud.
CVE-2014-3348 The SSH module in the Integrated Management Controller (IMC) before 2.3.1 in Cisco Unified Computing System on E-Series blade servers allows remote attackers to cause a denial of service (IMC hang) via a crafted SSH packet, aka Bug ID CSCuo69206.
CVE-2014-3221 Huawei Eudemon8000E firewall with software V200R001C01SPC800 and earlier versions allows users to log in to the device using Telnet or SSH. When an attacker sends to the device a mass of TCP packets with special structure, the logging process becomes slow and users may be unable to log in to the device.
CVE-2014-3048 Unspecified vulnerability on the IBM System Storage Virtualization Engine TS7700 allows local users to gain privileges by leveraging the TSSC service-user role to enter a crafted SSH command.
CVE-2014-2653 The verify_host_key function in sshconnect.c in the client in OpenSSH 6.6 and earlier allows remote servers to trigger the skipping of SSHFP DNS RR checking by presenting an unacceptable HostCertificate.
CVE-2014-2532 sshd in OpenSSH before 6.6 does not properly support wildcards on AcceptEnv lines in sshd_config, which allows remote attackers to bypass intended environment restrictions by using a substring located before a wildcard character.
CVE-2014-2200 Cisco NX-OS 5.0 before 5.0(5) on Nexus 7000 devices, when local authentication and multiple VDCs are enabled, allows remote authenticated users to gain privileges within an unintended VDC via an SSH session to a management interface, aka Bug ID CSCti11629.
CVE-2014-2198 Cisco Unified Communications Domain Manager (CDM) in Unified CDM Platform Software before 4.4.2 has a hardcoded SSH private key, which makes it easier for remote attackers to obtain access to the support and root accounts by extracting this key from a binary file found in a different installation of the product, aka Bug ID CSCud41130.
CVE-2014-1692 The hash_buffer function in schnorr.c in OpenSSH through 6.4, when Makefile.inc is modified to enable the J-PAKE protocol, does not initialize certain data structures, which might allow remote attackers to cause a denial of service (memory corruption) or have unspecified other impact via vectors that trigger an error condition.
CVE-2014-0960 IBM PureApplication System 1.0 before 1.0.0.4 cfix8 and 1.1 before 1.1.0.4 IF1 allows remote authenticated users to bypass intended access restrictions by establishing an SSH session from a deployed virtual machine.
CVE-2014-0709 Cisco UCS Director (formerly Cloupia) before 4.0.0.3 has a hardcoded password for the root account, which makes it easier for remote attackers to obtain administrative access via an SSH session to the CLI interface, aka Bug ID CSCui73930.
CVE-2014-0017 The RAND_bytes function in libssh before 0.6.3, when forking is enabled, does not properly reset the state of the OpenSSL pseudo-random number generator (PRNG), which causes the state to be shared between children processes and allows local users to obtain sensitive information by leveraging a pid collision.
CVE-2013-7465 Ice Cold Apps Servers Ultimate 6.0.2(12) does not require authentication for TELNET, SSH, or FTP, which allows remote attackers to execute arbitrary code by uploading PHP scripts.
CVE-2013-6943 Citrix NetScaler Application Delivery Controller (ADC) 9.3.x before 9.3-64.4, 10.0 before 10.0-77.5, and 10.1 before 10.1-118.7 allows remote attackers to conduct an LDAP injection attack via vectors related to SSH and Web management usernames.
CVE-2013-6838 An unspecified Enghouse Interactive Professional Services "addon product" in Enghouse Interactive IVR Pro (VIP2000) 9.0.3 (rel903), when using OpenVZ and fallback customization, uses the same SSH private key across different customers' installations, which allows remote attackers to gain privileges by leveraging knowledge of this key.
CVE-2013-6707 Memory leak in the connection-manager implementation in Cisco Adaptive Security Appliance (ASA) Software 9.1(.3) and earlier allows remote attackers to cause a denial of service (multi-protocol management outage) by making multiple management session requests, aka Bug ID CSCug33233.
CVE-2013-6441 The lxc-sshd template (templates/lxc-sshd.in) in LXC before 1.0.0.beta2 uses read-write permissions when mounting /sbin/init, which allows local users to gain privileges by modifying the init file.
CVE-2013-6372 The Subversion plugin before 1.54 for Jenkins stores credentials using base64 encoding, which allows local users to obtain passwords and SSH private keys by reading a subversion.credentials file.
CVE-2013-5997 Unspecified vulnerability in the SSH implementation on D-Link Japan DES-3800 devices with firmware before R4.50B58 allows remote authenticated users to cause a denial of service (device hang) via unknown vectors, a different vulnerability than CVE-2013-5998.
CVE-2013-5730 Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DSL-2740B Gateway with firmware EU_1.00 allow remote attackers to hijack the authentication of administrators for requests that (1) enable or disable Wireless MAC Address Filters via a wlFltMode action to wlmacflt.cmd, (2) enable or disable firewall protections via a request to scdmz.cmd, or (3) enable or disable remote management via a save action to scsrvcntr.cmd.
CVE-2013-4959 Puppet Enterprise before 3.0.1 uses HTTP responses that contain sensitive information without the "no-cache" setting, which might allow local users to obtain sensitive information such as (1) host name, (2) MAC address, and (3) SSH keys via the web browser cache.
CVE-2013-4852 Integer overflow in PuTTY 0.62 and earlier, WinSCP before 5.1.6, and other products that use PuTTY allows remote SSH servers to cause a denial of service (crash) and possibly execute arbitrary code in certain applications that use PuTTY via a negative size value in an RSA key signature during the SSH handshake, which triggers a heap-based buffer overflow.
CVE-2013-4707 The SSH implementation on D-Link Japan DES-3810 devices with firmware before R2.20.011 allows remote authenticated users to cause a denial of service (device hang) by leveraging login access.
CVE-2013-4706 The SSH implementation on the D-Link Japan DWL-2100AP with firmware before R252JP-RC572 allows remote authenticated users to cause a denial of service (reboot) by leveraging login access.
CVE-2013-4652 Unspecified vulnerability in the command-line management interface on Siemens Scalance W7xx devices with firmware before 4.5.4 allows remote attackers to bypass authentication and execute arbitrary code via a (1) SSH or (2) TELNET connection.
CVE-2013-4581 GitLab 5.0 before 5.4.2, Community Edition before 6.2.4, Enterprise Edition before 6.2.1 and gitlab-shell before 1.7.8 allows remote attackers to execute arbitrary code via a crafted change using SSH.
CVE-2013-4548 The mm_newkeys_from_blob function in monitor_wrap.c in sshd in OpenSSH 6.2 and 6.3, when an AES-GCM cipher is used, does not properly initialize memory for a MAC context data structure, which allows remote authenticated users to bypass intended ForceCommand and login-shell restrictions via packet data that provides a crafted callback address.
CVE-2013-4490 The SSH key upload feature (lib/gitlab_keys.rb) in gitlab-shell before 1.7.3, as used in GitLab 5.0 before 5.4.1 and 6.x before 6.2.3, allows remote authenticated users to execute arbitrary commands via shell metacharacters in the public key.
CVE-2013-4437 Unspecified vulnerability in salt-ssh in Salt (aka SaltStack) 0.17.0 has unspecified impact and vectors related to "insecure Usage of /tmp."
CVE-2013-4436 The default configuration for salt-ssh in Salt (aka SaltStack) 0.17.0 does not validate the SSH host key of requests, which allows remote attackers to have unspecified impact via a man-in-the-middle (MITM) attack.
CVE-2013-4434 Dropbear SSH Server before 2013.59 generates error messages for a failed logon attempt with different time delays depending on whether the user account exists, which allows remote attackers to discover valid usernames.
CVE-2013-4421 The buf_decompress function in packet.c in Dropbear SSH Server before 2013.59 allows remote attackers to cause a denial of service (memory consumption) via a compressed packet that has a large size when it is decompressed.
CVE-2013-4259 runner/connection_plugins/ssh.py in Ansible before 1.2.3, when using ControlPersist, allows local users to redirect a ssh session via a symlink attack on a socket file with a predictable name in /tmp/.
CVE-2013-4207 Buffer overflow in sshbn.c in PuTTY before 0.63 allows remote SSH servers to cause a denial of service (crash) via an invalid DSA signature that is not properly handled during computation of a modular inverse and triggers the overflow during a division by zero by the bignum functionality, a different vulnerability than CVE-2013-4206.
CVE-2013-4206 Heap-based buffer underflow in the modmul function in sshbn.c in PuTTY before 0.63 allows remote SSH servers to cause a denial of service (crash) and possibly trigger memory corruption or code execution via a crafted DSA signature, which is not properly handled when performing certain bit-shifting operations during modular multiplication.
CVE-2013-3594 The SSH service on Dell PowerConnect 3348 1.2.1.3, 3524p 2.0.0.48, and 5324 2.0.1.4 switches allows remote attackers to cause a denial of service (device reset) or possibly execute arbitrary code by sending many packets to TCP port 22.
CVE-2013-2342 The HP StoreOnce D2D backup system with software before 3.0.0 has a default password of badg3r5 for the HPSupport account, which allows remote attackers to obtain administrative access and delete data via an SSH session.
CVE-2013-2302 TransWARE Active! mail 6, when an external public interface is used, allows local users to obtain sensitive information belonging to arbitrary users by leveraging shell access, as demonstrated by a TELNET or SSH session to the server.
CVE-2013-2233 Ansible before 1.2.1 makes it easier for remote attackers to conduct man-in-the-middle attacks by leveraging failure to cache SSH host keys.
CVE-2013-1423 (1) contrib/gforge-3.0-cronjobs.patch, (2) cronjobs/homedirs.php, (3) deb-specific/fileforge.pl, (4) deb-specific/group_dump_update.pl, (5) deb-specific/ssh_dump_update.pl, (6) deb-specific/user_dump_update.pl, (7) plugins/scmbzr/common/BzrPlugin.class.php, (8) plugins/scmcvs/common/CVSPlugin.class.php, (9) plugins/scmcvs/cronjobs/cvs.php, (10) plugins/scmcvs/cronjobs/ssh_create.php, (11) plugins/scmgit/common/GitPlugin.class.php, (12) plugins/scmsvn/common/SVNPlugin.class.php, (13) plugins/wiki/cronjobs/create_groups.php, (14) utils/cvs1/cvscreate.sh, and (15) utils/include.pl in FusionForge 5.0, 5.1, and 5.2 allows local users to change arbitrary file permissions, obtain sensitive information, and have other unspecified impacts via a (1) symlink or (2) hard link attack on certain files.
CVE-2013-1246 Cisco TelePresence System Software does not properly handle inactive t-shell sessions, which allows remote authenticated users to cause a denial of service (memory consumption and service outage) by establishing multiple SSH connections, aka Bug ID CSCug77610.
CVE-2013-1193 The Secure Shell (SSH) implementation on Cisco Adaptive Security Appliances (ASA) devices, and in Cisco Firewall Services Module (FWSM), does not properly terminate sessions, which allows remote attackers to cause a denial of service (SSH service outage) by repeatedly establishing SSH connections, aka Bug IDs CSCue63881, CSCuf51892, CSCue78671, and CSCug26937.
CVE-2013-1191 Cisco NX-OS 6.1 before 6.1(5) on Nexus 7000 devices, when local authentication and multiple VDCs are enabled, allows remote authenticated users to gain privileges within an unintended VDC via crafted SSH key data in an SSH session to a management interface, aka Bug ID CSCud88400.
CVE-2013-1154 The Cisco Small Business 200 Series Smart Switch 1.2.7.76 and earlier, Small Business 300 Series Managed Switch 1.2.7.76 and earlier, and Small Business 500 Series Stackable Managed Switch 1.2.7.76 and earlier allow remote attackers to cause a denial of service (SSL/TLS layer outage) via malformed (1) SSH or (2) SSL packets, aka Bug ID CSCua30246.
CVE-2013-0714 IPSSH (aka the SSH server) in Wind River VxWorks 6.5 through 6.9 allows remote attackers to execute arbitrary code or cause a denial of service (daemon hang) via a crafted public-key authentication request.
CVE-2013-0713 IPSSH (aka the SSH server) in Wind River VxWorks 6.5 through 6.9 allows remote authenticated users to cause a denial of service (daemon outage) via a crafted pty request.
CVE-2013-0712 IPSSH (aka the SSH server) in Wind River VxWorks 6.5 through 6.9 allows remote authenticated users to cause a denial of service (daemon outage) via a crafted packet.
CVE-2013-0711 IPSSH (aka the SSH server) in Wind River VxWorks 6.5 through 6.9 allows remote attackers to cause a denial of service (daemon outage) via a crafted authentication request.
CVE-2013-0220 The (1) sss_autofs_cmd_getautomntent and (2) sss_autofs_cmd_getautomntbyname function in responder/autofs/autofssrv_cmd.c and the (3) ssh_cmd_parse_request function in responder/ssh/sshsrv_cmd.c in System Security Services Daemon (SSSD) before 1.9.4 allow remote attackers to cause a denial of service (out-of-bounds read, crash, and restart) via a crafted SSSD packet.
CVE-2013-0137 The default configuration of the Digital Alert Systems DASDEC EAS device before 2.0-2 and the Monroe Electronics R189 One-Net EAS device before 2.0-2 contains a known SSH private key, which makes it easier for remote attackers to obtain root access, and spoof alerts, via an SSH session.
CVE-2012-6066 freeSSHd.exe in freeSSHd through 1.2.6 allows remote attackers to bypass authentication via a crafted session, as demonstrated by an OpenSSH client with modified versions of ssh.c and sshconnect2.c.
CVE-2012-6063 Double free vulnerability in the sftp_mkdir function in sftp.c in libssh before 0.5.3 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via unspecified vectors, a different vector than CVE-2012-4559.
CVE-2012-5975 The SSH USERAUTH CHANGE REQUEST feature in SSH Tectia Server 6.0.4 through 6.0.20, 6.1.0 through 6.1.12, 6.2.0 through 6.2.5, and 6.3.0 through 6.3.2 on UNIX and Linux, when old-style password authentication is enabled, allows remote attackers to bypass authentication via a crafted session involving entry of blank passwords, as demonstrated by a root login session from a modified OpenSSH client with an added input_userauth_passwd_changereq call in sshconnect2.c.
CVE-2012-5717 Cisco Adaptive Security Appliances (ASA) devices with firmware 8.x through 8.4(1) do not properly manage SSH sessions, which allows remote authenticated users to cause a denial of service (device crash) by establishing multiple sessions, aka Bug ID CSCtc59462.
CVE-2012-5616 Apache CloudStack 4.0.0-incubating and Citrix CloudPlatform (formerly Citrix CloudStack) before 3.0.6 stores sensitive information in the log4j.conf log file, which allows local users to obtain (1) the SSH private key as recorded by the createSSHKeyPair API, (2) the password of an added host as recorded by the AddHost API, or the password of an added VM as recorded by the (3) DeployVM or (4) ResetPasswordForVM API.
CVE-2012-5536 A certain Red Hat build of the pam_ssh_agent_auth module on Red Hat Enterprise Linux (RHEL) 6 and Fedora Rawhide calls the glibc error function instead of the error function in the OpenSSH codebase, which allows local users to obtain sensitive information from process memory or possibly gain privileges via crafted use of an application that relies on this module, as demonstrated by su and sudo.
CVE-2012-5445 The kernel in Cisco Native Unix (CNU) on Cisco Unified IP Phone 7900 series devices (aka TNP phones) with software before 9.3.1-ES10 does not properly validate unspecified system calls, which allows attackers to execute arbitrary code or cause a denial of service (memory overwrite) via a crafted binary.
CVE-2012-5301 The default configuration of Cerberus FTP Server before 5.0.4.0 supports the DES cipher for SSH sessions, which makes it easier for remote attackers to obtain sensitive information by sniffing the network and performing a brute-force attack on the encrypted data.
CVE-2012-5014 Cisco IOS before 15.1(2)SY allows remote authenticated users to cause a denial of service (device crash) by establishing an SSH session from a client and then placing this client into a (1) slow or (2) idle state, aka Bug ID CSCto87436.
CVE-2012-4898 Mesh OS before 7.9.1.1 on Tropos wireless mesh routers does not use a sufficient source of entropy for SSH keys, which makes it easier for man-in-the-middle attackers to spoof a device or modify a client-server data stream by leveraging knowledge of a key from a product installation elsewhere.
CVE-2012-4838 IBM Flex System Chassis Management Module (CMM) and Integrated Management Module 2 (IMM2) allow local users to obtain sensitive information about (1) local accounts, (2) SSH private keys, (3) SSL/TLS private keys, (4) SNMPv3 communities, and (5) LDAP credentials by leveraging unspecified side effects of service or maintenance activity.
CVE-2012-4716 N-Tron 702-W Industrial Wireless Access Point devices use the same (1) SSH and (2) HTTPS private keys across different customers' installations, which makes it easier for remote attackers to defeat cryptographic protection mechanisms by leveraging knowledge of a key.
CVE-2012-4702 360 Systems Maxx, Image Server Maxx, and Image Server 2000 have a hardcoded password for the root account, which makes it easier for remote attackers to execute arbitrary code, or modify video content or scheduling, via an SSH session.
CVE-2012-4698 Siemens RuggedCom Rugged Operating System (ROS) before 3.12, ROX I OS through 1.14.5, ROX II OS through 2.3.0, and RuggedMax OS through 4.2.1.4621.22 use hardcoded private keys for SSL and SSH communication, which makes it easier for man-in-the-middle attackers to spoof servers and decrypt network traffic by leveraging the availability of these keys within ROS files at all customer installations.
CVE-2012-4694 Moxa EDR-G903 series routers with firmware before 2.11 do not use a sufficient source of entropy for (1) SSH and (2) SSL keys, which makes it easier for man-in-the-middle attackers to spoof a device or modify a client-server data stream by leveraging knowledge of a key from a product installation elsewhere.
CVE-2012-4638 Cisco IOS before 15.1(1)SY allows local users to cause a denial of service (device reload) by establishing an outbound SSH session, aka Bug ID CSCto00318.
CVE-2012-4577 The Linux firmware image on (1) Korenix Jetport 5600 series serial-device servers and (2) ORing Industrial DIN-Rail serial-device servers has a hardcoded password of "password" for the root account, which allows remote attackers to obtain administrative access via an SSH session.
CVE-2012-4562 Multiple integer overflows in libssh before 0.5.3 allow remote attackers to cause a denial of service (infinite loop or crash) and possibly execute arbitrary code via unspecified vectors, which triggers a buffer overflow, infinite loop, or possibly some other unspecified vulnerabilities.
CVE-2012-4561 The (1) publickey_make_dss, (2) publickey_make_rsa, (3) signature_from_string, (4) ssh_do_sign, and (5) ssh_sign_session_id functions in keys.c in libssh before 0.5.3 free "an invalid pointer on an error path," which might allow remote attackers to cause a denial of service (crash) via unspecified vectors.
CVE-2012-4560 Multiple buffer overflows in libssh before 0.5.3 allow remote attackers to cause a denial of service (crash) or possibly execute arbitrary code via unspecified vectors.
CVE-2012-4559 Multiple double free vulnerabilities in the (1) agent_sign_data function in agent.c, (2) channel_request function in channels.c, (3) ssh_userauth_pubkey function in auth.c, (4) sftp_parse_attr_3 function in sftp.c, and (5) try_publickey_from_file function in keyfiles.c in libssh before 0.5.3 allow remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via unspecified vectors.
CVE-2012-4078 The Baseboard Management Controller (BMC) in Cisco Unified Computing System (UCS) does not properly handle SSH escape sequences, which allows remote authenticated users to bypass an unspecified authentication step via SSH port forwarding, aka Bug ID CSCtg17656.
CVE-2012-3579 Symantec Messaging Gateway (SMG) before 10.0 has a default password for an unspecified account, which makes it easier for remote attackers to obtain privileged access via an SSH session.
CVE-2012-3478 rssh 2.3.3 and earlier allows local users to bypass intended restricted shell access via crafted environment variables in the command line.
CVE-2012-3039 Moxa OnCell Gateway G3111, G3151, G3211, and G3251 devices with firmware before 1.4 do not use a sufficient source of entropy for SSH and SSL keys, which makes it easier for remote attackers to obtain access by leveraging knowledge of a key from a product installation elsewhere.
CVE-2012-3006 The Innominate mGuard Smart HW before HW-101130 and BD before BD-101030, mGuard industrial RS, mGuard delta HW before HW-103060 and BD before BD-211010, mGuard PCI, mGuard blade, and EAGLE mGuard appliances with software before 7.5.0 do not use a sufficient source of entropy for private keys, which makes it easier for man-in-the-middle attackers to spoof (1) HTTPS or (2) SSH servers by predicting a key value.
CVE-2012-2441 RuggedCom Rugged Operating System (ROS) before 3.3 has a factory account with a password derived from the MAC Address field in a banner, which makes it easier for remote attackers to obtain access by performing a calculation on this address value, and then establishing a (1) SSH or (2) HTTPS session, a different vulnerability than CVE-2012-1803.
CVE-2012-2252 Incomplete blacklist vulnerability in rssh before 2.3.4, when the rsync protocol is enabled, allows local users to bypass intended restricted shell access via the --rsh command line option.
CVE-2012-2251 rssh 2.3.2, as used by Debian, Fedora, and others, when the rsync protocol is enabled, allows local users to bypass intended restricted shell access via a (1) "-e" or (2) "--" command line option.
CVE-2012-1493 F5 BIG-IP appliances 9.x before 9.4.8-HF5, 10.x before 10.2.4, 11.0.x before 11.0.0-HF2, and 11.1.x before 11.1.0-HF3, and Enterprise Manager before 2.1.0-HF2, 2.2.x before 2.2.0-HF1, and 2.3.x before 2.3.0-HF3, use a single SSH private key across different customers' installations and do not properly restrict access to this key, which makes it easier for remote attackers to perform SSH logins via the PubkeyAuthentication option.
CVE-2012-1339 The Fabric Interconnect component in Cisco Unified Computing System (UCS) 2.0 allows remote attackers to cause a denial of service (process crash) via an attempted SSH session, aka Bug ID CSCtt94543.
CVE-2012-0920 Use-after-free vulnerability in Dropbear SSH Server 0.52 through 2012.54, when command restriction and public key authentication are enabled, allows remote authenticated users to execute arbitrary code and bypass command restrictions via multiple crafted command requests, related to "channels concurrency."
CVE-2012-0814 The auth_parse_options function in auth-options.c in sshd in OpenSSH before 5.7 provides debug messages containing authorized_keys command options, which allows remote authenticated users to obtain potentially sensitive information by reading these messages, as demonstrated by the shared user account required by Gitolite. NOTE: this can cross privilege boundaries because a user account may intentionally have no shell or filesystem access, and therefore may have no supported way to read an authorized_keys file in its own home directory.
CVE-2012-0386 The SSHv2 implementation in Cisco IOS 12.2, 12.4, 15.0, 15.1, and 15.2 and IOS XE 2.3.x through 2.6.x and 3.1.xS through 3.4.xS before 3.4.2S allows remote attackers to cause a denial of service (device reload) via a crafted username in a reverse SSH login attempt, aka Bug ID CSCtr49064.
CVE-2012-0338 Cisco IOS 12.2 through 12.4 and 15.0 does not recognize the vrf-also keyword during enforcement of access-class commands, which allows remote attackers to establish SSH connections from arbitrary source IP addresses via a standard SSH client, aka Bug ID CSCsv86113.
CVE-2012-0099 Unspecified vulnerability in Oracle Solaris 9, 10, and 11 Express allows remote attackers to affect availability via unknown vectors related to sshd.
CVE-2011-5000 The ssh_gssapi_parse_ename function in gss-serv.c in OpenSSH 5.8 and earlier, when gssapi-with-mic authentication is enabled, allows remote authenticated users to cause a denial of service (memory consumption) via a large value in a certain length field. NOTE: there may be limited scenarios in which this issue is relevant.
CVE-2011-4659 Cisco TelePresence Software before TE 4.1.1 on the Cisco IP Video Phone E20 has a default password for the root account after an upgrade to TE 4.1.0, which makes it easier for remote attackers to modify the configuration via an SSH session, aka Bug ID CSCtw69889, a different vulnerability than CVE-2011-2555.
CVE-2011-4327 ssh-keysign.c in ssh-keysign in OpenSSH before 5.8p2 on certain platforms executes ssh-rand-helper with unintended open file descriptors, which allows local users to obtain sensitive key information via the ptrace system call.
CVE-2011-3992 Buffer overflow in the SSH server functionality on the D-Link DES-3800 with firmware before 4.50B052, DWL-2100AP with firmware before 2.50RC548, and DWL-3200AP with firmware before 2.55RC549 allows remote attackers to execute arbitrary code or cause a denial of service via unspecified vectors.
CVE-2011-3870 Puppet 2.7.x before 2.7.5, 2.6.x before 2.6.11, and 0.25.x allows local users to modify the permissions of arbitrary files via a symlink attack on the SSH authorized_keys file.
CVE-2011-3590 The Red Hat mkdumprd script for kexec-tools, as distributed in the kexec-tools 1.x before 1.102pre-154 and 2.x before 2.0.0-209 packages in Red Hat Enterprise Linux, includes all of root's SSH private keys within a vmcore file, which allows context-dependent attackers to obtain sensitive information by inspecting the file content.
CVE-2011-3589 The Red Hat mkdumprd script for kexec-tools, as distributed in the kexec-tools 1.x before 1.102pre-154 and 2.x before 2.0.0-209 packages in Red Hat Enterprise Linux, uses world-readable permissions for vmcore files, which allows local users to obtain sensitive information by inspecting the file content, as demonstrated by a search for a root SSH key.
CVE-2011-3588 The SSH configuration in the Red Hat mkdumprd script for kexec-tools, as distributed in the kexec-tools 1.x before 1.102pre-154 and 2.x before 2.0.0-209 packages in Red Hat Enterprise Linux, disables the StrictHostKeyChecking option, which allows man-in-the-middle attackers to spoof kdump servers, and obtain sensitive core information, by using an arbitrary SSH key.
CVE-2011-2555 Cisco TelePresence Recording Server 1.7.2.x before 1.7.2.1 has a default password for the root administrator account, which makes it easier for remote attackers to modify the configuration via an SSH session, aka Bug ID CSCtr76182.
CVE-2011-2294 Unspecified vulnerability in Oracle Solaris 10 and 11 Express allows remote attackers to affect availability, related to SSH.
CVE-2011-2245 Unspecified vulnerability in the Solaris component in Oracle Sun Products Suite 9 and 10 allows remote attackers to affect confidentiality, integrity, and availability, related to SSH.
CVE-2011-1624 Cisco IOS 12.2(58)SE, when a login banner is configured, allows remote attackers to cause a denial of service (device reload) by establishing two SSH2 sessions, aka Bug ID CSCto62631.
CVE-2011-1623 Cisco Media Processing Software before 1.2 on Media Experience Engine (MXE) 5600 devices has a default root password, which makes it easier for context-dependent attackers to obtain access via (1) the local console, (2) an SSH session, or (3) a TELNET session, aka Bug ID CSCto77737.
CVE-2011-1137 Integer overflow in the mod_sftp (aka SFTP) module in ProFTPD 1.3.3d and earlier allows remote attackers to cause a denial of service (memory consumption leading to OOM kill) via a malformed SSH message.
CVE-2011-0949 Cisco IOS XR 3.6.x, 3.8.x before 3.8.3, and 3.9.x before 3.9.1 does not properly remove sshd_lock files from /tmp/, which allows remote attackers to cause a denial of service (disk consumption) by making many SSHv1 connections, aka Bug ID CSCtd64417.
CVE-2011-0766 The random number generator in the Crypto application before 2.0.2.2, and SSH before 2.0.5, as used in the Erlang/OTP ssh library before R14B03, uses predictable seeds based on the current time, which makes it easier for remote attackers to guess DSA host and SSH session keys.
CVE-2011-0539 The key_certify function in usr.bin/ssh/key.c in OpenSSH 5.6 and 5.7, when generating legacy certificates using the -t command-line option in ssh-keygen, does not initialize the nonce field, which might allow remote attackers to obtain sensitive stack memory contents or make it easier to conduct hash collision attacks.
CVE-2011-0437 shared/inc/sql/ssh.php in the SSH accounts management implementation in Domain Technologie Control (DTC) before 0.32.9 allows remote authenticated users to delete arbitrary accounts via the edssh_account parameter in a deletesshaccount Delete action.
CVE-2011-0189 The default configuration of Terminal in Apple Mac OS X 10.6 before 10.6.7 uses SSH protocol version 1 within the New Remote Connection dialog, which might make it easier for man-in-the-middle attackers to spoof SSH servers by leveraging protocol vulnerabilities.
CVE-2010-5294 Multiple cross-site scripting (XSS) vulnerabilities in the request_filesystem_credentials function in wp-admin/includes/file.php in WordPress before 3.0.2 allow remote servers to inject arbitrary web script or HTML by providing a crafted error message for a (1) FTP or (2) SSH connection attempt.
CVE-2010-5107 The default configuration of OpenSSH through 6.1 enforces a fixed time limit between establishing a TCP connection and completing a login, which makes it easier for remote attackers to cause a denial of service (connection-slot exhaustion) by periodically making many new TCP connections.
CVE-2010-4755 The (1) remote_glob function in sftp-glob.c and the (2) process_put function in sftp.c in OpenSSH 5.8 and earlier, as used in FreeBSD 7.3 and 8.1, NetBSD 5.0.2, OpenBSD 4.7, and other products, allow remote authenticated users to cause a denial of service (CPU and memory consumption) via crafted glob expressions that do not match any pathnames, as demonstrated by glob expressions in SSH_FXP_STAT requests to an sftp daemon, a different vulnerability than CVE-2010-2632.
CVE-2010-3281 Stack-based buffer overflow in the HTTP proxy service in Alcatel-Lucent OmniVista 4760 server before R5.1.06.03.c_Patch3 allows remote attackers to execute arbitrary code or cause a denial of service (service crash) via a long request.
CVE-2010-3038 Cisco Unified Videoconferencing (UVC) System 5110 and 5115, when the Linux operating system is used, has a default password for the (1) root, (2) cs, and (3) develop accounts, which makes it easier for remote attackers to obtain access via the (a) FTP or (b) SSH daemon, aka Bug ID CSCti54008.
CVE-2010-2975 Cisco Unified Wireless Network (UWN) Solution 7.x through 7.0.98.0 does not properly handle multiple SSH sessions, which allows physically proximate attackers to read a password, related to an "arrow key failure," aka Bug ID CSCtg51544.
CVE-2010-2821 Unspecified vulnerability on the Cisco Firewall Services Module (FWSM) with software 3.2 before 3.2(17.2), 4.0 before 4.0(11.1), and 4.1 before 4.1(1.2) for Catalyst 6500 series switches and 7600 series routers, when multi-mode is enabled, allows remote attackers to cause a denial of service (device reload) via crafted (1) Telnet, (2) SSH, or (3) ASDM traffic over TCP, aka Bug ID CSCtg68694.
CVE-2010-0500 Event Monitor in Apple Mac OS X before 10.6.3 does not properly validate hostnames of SSH clients, which allows remote attackers to cause a denial of service (arbitrary client blacklisting) via a crafted DNS PTR record, related to a "plist injection issue."
CVE-2010-0168 The nsDocument::MaybePreLoadImage function in content/base/src/nsDocument.cpp in the image-preloading implementation in Mozilla Firefox 3.6 before 3.6.2 does not apply scheme restrictions and policy restrictions to the image's URL, which might allow remote attackers to cause a denial of service (application crash or hang) or hijack the functionality of the browser's add-ons via a crafted SRC attribute of an IMG element, as demonstrated by remote command execution through an ssh: URL in a configuration that supports gnome-vfs with a nonstandard network.gnomevfs.supported-protocols setting.
CVE-2010-0137 Unspecified vulnerability in the sshd_child_handler process in the SSH server in Cisco IOS XR 3.4.1 through 3.7.0 allows remote attackers to cause a denial of service (process crash and memory consumption) via a crafted SSH2 packet, aka Bug ID CSCsu10574.
CVE-2009-4845 The configuration page in ToutVirtual VirtualIQ Pro 3.2 build 7882 contains cleartext SSH credentials, which allows remote attackers to obtain sensitive information by reading the username and password fields.
CVE-2009-4510 The SSH service on the TANDBERG Video Communication Server (VCS) before X5.1 uses a fixed DSA key, which makes it easier for remote attackers to conduct man-in-the-middle attacks and spoof arbitrary servers via crafted SSH packets.
CVE-2009-4226 Race condition in the IP module in the kernel in Sun OpenSolaris snv_106 through snv_124 allows remote attackers to cause a denial of service (NULL pointer dereference and panic) via unspecified vectors related to the (1) tcp_do_getsockname or (2) tcp_do_getpeername function.
CVE-2009-4075 Unspecified vulnerability in the timeout mechanism in sshd in Sun Solaris 10, and OpenSolaris snv_99 through snv_123, allows remote attackers to cause a denial of service (daemon outage) via unknown vectors that trigger a "dangling sshd authentication thread."
CVE-2009-3710 RioRey RIOS 4.6.6 and 4.7.0 uses an undocumented, hard-coded username (dbadmin) and password (sq!us3r) for an SSH tunnel, which allows remote attackers to gain privileges via port 8022.
CVE-2009-3369 CgiUserConfigEdit in BackupPC 3.1.0, when SSH keys and Rsync are in use in a multi-user environment, does not restrict users from the ClientNameAlias function, which allows remote authenticated users to read and write sensitive files by modifying ClientNameAlias to match another system, then initiating a backup or restore.
CVE-2009-3340 Unspecified vulnerability in FreeSSHD 1.2.4 allows remote attackers to cause a denial of service via unknown vectors, as demonstrated by a certain module in VulnDisco Pack Professional 8.11. NOTE: as of 20090917, this disclosure has no actionable information. However, because the VulnDisco Pack author is a reliable researcher, the issue is being assigned a CVE identifier for tracking purposes.
CVE-2009-3304 GForge 4.5.14, 4.7 rc2, and 4.8.2 allows local users to overwrite arbitrary files via a symlink attack on authorized_keys files in users' home directories, related to deb-specific/ssh_dump_update.pl and cronjobs/cvs-cron/ssh_create.php.
CVE-2009-2904 A certain Red Hat modification to the ChrootDirectory feature in OpenSSH 4.8, as used in sshd in OpenSSH 4.3 in Red Hat Enterprise Linux (RHEL) 5.4 and Fedora 11, allows local users to gain privileges via hard links to setuid programs that use configuration files within the chroot directory, related to requirements for directory ownership.
CVE-2009-2871 Unspecified vulnerability in Cisco IOS 12.2 and 12.4, when SSLVPN sessions, SSH sessions, or IKE encrypted nonces are enabled, allows remote attackers to cause a denial of service (device reload) via a crafted encrypted packet, aka Bug ID CSCsq24002.
CVE-2009-2829 Event Monitor in Apple Mac OS X 10.5.8 does not properly handle crafted authentication data sent to an SSH daemon, which allows remote attackers to cause a denial of service via vectors involving processing of XML log documents by other services, related to a "log injection" issue.
CVE-2009-2818 Adaptive Firewall in Apple Mac OS X before 10.6.2 does not properly handle invalid usernames in SSH login attempts, which makes it easier for remote attackers to obtain login access via a brute-force attack (aka dictionary attack).
CVE-2009-2410 The local_handler_callback function in server/responder/pam/pam_LOCAL_domain.c in sssd 0.4.1 does not properly handle blank-password accounts in the SSSD BE database, which allows context-dependent attackers to obtain access by sending the account's username, in conjunction with an arbitrary password, over an ssh connection.
CVE-2009-1745 Armorlogic Profense Web Application Firewall before 2.2.22, and 2.4.x before 2.4.4, has a default root password hash, and permits password-based root logins over SSH, which makes it easier for remote attackers to obtain access.
CVE-2009-1273 pam_ssh 1.92 and possibly other versions, as used when PAM is compiled with USE=ssh, generates different error messages depending on whether the username is valid or invalid, which makes it easier for remote attackers to enumerate usernames.
CVE-2009-1165 Memory leak on the Cisco Wireless LAN Controller (WLC) platform 4.x before 4.2.205.0, 5.1 before 5.1.163.0, and 5.0 and 5.2 before 5.2.178.0, as used in Cisco 1500 Series, 2000 Series, 2100 Series, 4100 Series, 4200 Series, and 4400 Series Wireless Services Modules (WiSM), WLC Modules for Integrated Services Routers, and Catalyst 3750G Integrated Wireless LAN Controllers, allows remote attackers to cause a denial of service (memory consumption and device reload) via SSH management connections, aka Bug ID CSCsw40789.
CVE-2009-0623 Unspecified vulnerability in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.3) and Cisco ACE 4710 Application Control Engine Appliance before A3(2.1) allows remote attackers to cause a denial of service (device reload) via a crafted SSH packet.
CVE-2009-0058 The Cisco Wireless LAN Controller (WLC), Cisco Catalyst 6500 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.x before 4.2.176.0 and 5.x before 5.2 allow remote attackers to cause a denial of service (web authentication outage or device reload) via unspecified network traffic, as demonstrated by a vulnerability scanner.
CVE-2008-7225 Heap-based buffer overflow in Foxit Remote Access Server (aka WAC Server) 2.0 Build 3503 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via long SSH packets, a different vulnerability than CVE-2008-0151.
CVE-2008-7031 Heap-based buffer overflow in Foxit Remote Access Server (aka WAC Server) 2.0 Build 3503 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via long SSH packets, a different vulnerability than CVE-2008-0151.
CVE-2008-6899 Multiple buffer overflows in freeSSHd 1.2.1 allow remote authenticated users to cause a denial of service (crash) and execute arbitrary code via a long (1) open, (2) unlink, (3) mkdir, (4) rmdir, or (5) stat SFTP command.
CVE-2008-5161 Error handling in the SSH protocol in (1) SSH Tectia Client and Server and Connector 4.0 through 4.4.11, 5.0 through 5.2.4, and 5.3 through 5.3.8; Client and Server and ConnectSecure 6.0 through 6.0.4; Server for Linux on IBM System z 6.0.4; Server for IBM z/OS 5.5.1 and earlier, 6.0.0, and 6.0.1; and Client 4.0-J through 4.3.3-J and 4.0-K through 4.3.10-K; and (2) OpenSSH 4.7p1 and possibly other versions, when using a block cipher algorithm in Cipher Block Chaining (CBC) mode, makes it easier for remote attackers to recover certain plaintext data from an arbitrary block of ciphertext in an SSH session via unknown vectors.
CVE-2008-5124 JSCAPE Secure FTP Applet 4.8.0 and earlier does not ask the user to verify a new or mismatched SSH host key, which makes it easier for remote attackers to perform man-in-the-middle attacks.
CVE-2008-4956 fwb_install in fwbuilder 2.1.19 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/ssh-agent.##### temporary file.
CVE-2008-4726 Stack-based buffer overflow in the SFTP subsystem in GoodTech SSH 6.4 allows remote authenticated users to execute arbitrary code via a long string to the (1) open (aka SSH_FXP_OPEN), (2) unlink, (3) opendir, and other unspecified parameters.
CVE-2008-3825 pam_krb5 2.2.14 in Red Hat Enterprise Linux (RHEL) 5 and earlier, when the existing_ticket option is enabled, uses incorrect privileges when reading a Kerberos credential cache, which allows local users to gain privileges by setting the KRB5CCNAME environment variable to an arbitrary cache filename and running the (1) su or (2) sudo program. NOTE: there may be a related vector involving sshd that has limited relevance.
CVE-2008-3731 Unspecified vulnerability in Serv-U File Server 7.0.0.1, and other versions before 7.2.0.1, allows remote authenticated users to cause a denial of service (daemon crash) via an SSH session with SFTP commands for directory creation and logging.
CVE-2008-3234 sshd in OpenSSH 4 on Debian GNU/Linux, and the 20070303 OpenSSH snapshot, allows remote authenticated users to obtain access to arbitrary SELinux roles by appending a :/ (colon slash) sequence, followed by the role name, to the username.
CVE-2008-2573 Stack-based buffer overflow in SFTP in freeSSHd 1.2.1 allows remote authenticated users to execute arbitrary code via a long directory name in an SSH_FXP_OPENDIR (aka opendir) command.
CVE-2008-2285 The ssh-vulnkey tool on Ubuntu Linux 7.04, 7.10, and 8.04 LTS does not recognize authorized_keys lines that contain options, which makes it easier for remote attackers to exploit CVE-2008-0166 by guessing a key that was not identified by this tool.
CVE-2008-1657 OpenSSH 4.4 up to versions before 4.9 allows remote authenticated users to bypass the sshd_config ForceCommand directive by modifying the .ssh/rc session file.
CVE-2008-1483 OpenSSH 4.3p2, and probably other versions, allows local users to hijack forwarded X connections by causing ssh to set DISPLAY to :10, even when another process is listening on the associated port, as demonstrated by opening TCP port 6010 (IPv4) and sniffing a cookie sent by Emacs.
CVE-2008-1369 A certain incorrect Sun Solaris 10 image on SPARC Enterprise T5120 and T5220 servers has /etc/default/login and /etc/ssh/sshd_config files that configure root logins in a manner unintended by the vendor, which allows remote attackers to gain privileges via unspecified vectors.
CVE-2008-1159 Multiple unspecified vulnerabilities in the SSH server in Cisco IOS 12.4 allow remote attackers to cause a denial of service (device restart) via unknown vectors, aka Bug ID (1) CSCsk42419, (2) CSCsk60020, and (3) CSCsh51293.
CVE-2008-0852 freeSSHd 1.2 and earlier allows remote attackers to cause a denial of service (crash) via a SSH2_MSG_NEWKEYS packet to TCP port 22, which triggers a NULL pointer dereference.
CVE-2008-0704 Unspecified vulnerability in the SSH server in HP OpenVMS TCP/IP Services on OpenVMS on the Alpha platform with 5.4 before ECO 7, and on the Integrity and Alpha platforms with 5.5 before ECO 3 and 5.6 before ECO 2, allows remote attackers to obtain unspecified access via unknown vectors.
CVE-2008-0590 Buffer overflow in Ipswitch WS_FTP Server with SSH 6.1.0.0 allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a long opendir command.
CVE-2008-0536 Unspecified vulnerability in the SSH server in (1) Cisco Service Control Engine (SCE) 3.0.x before 3.0.7 and 3.1.x before 3.1.0, and (2) Icon Labs Iconfidant SSH before 2.3.8, allows remote attackers to cause a denial of service (management interface outage) via SSH traffic that occurs during management operations and triggers "illegal I/O operations," aka Bug ID CSCsh49563.
CVE-2008-0535 Unspecified vulnerability in the SSH server in (1) Cisco Service Control Engine (SCE) before 3.1.6, and (2) Icon Labs Iconfidant SSH before 2.3.8, allows remote attackers to cause a denial of service (device instability) via "SSH credentials that attempt to change the authentication method," aka Bug ID CSCsm14239.
CVE-2008-0534 The SSH server in (1) Cisco Service Control Engine (SCE) before 3.1.6, and (2) Icon Labs Iconfidant SSH before 2.3.8, allows remote attackers to cause a denial of service (device restart or daemon outage) via a high rate of login attempts, aka Bug ID CSCsi68582.
CVE-2008-0132 Pragma FortressSSH 5.0 Build 4 Revision 293 and earlier handles long input to sshd.exe by creating an error-message window and waiting for the administrator to click in this window before terminating the sshd.exe process, which allows remote attackers to cause a denial of service (connection slot exhaustion) via a flood of SSH connections with long data objects, as demonstrated by (1) a long list of keys and (2) a long username.
CVE-2008-0097 Format string vulnerability in the log function in Georgia SoftWorks SSH2 Server (GSW_SSHD) 7.01.0003 and earlier allows remote attackers to execute arbitrary code via format string specifiers in the username field, as demonstrated by a certain LoginPassword message.
CVE-2008-0096 Multiple buffer overflows in Georgia SoftWorks SSH2 Server (GSW_SSHD) 7.01.0003 and earlier allow remote attackers to execute arbitrary code via a (1) a long username, which triggers an overflow in the log function; or (2) a long password.
CVE-2007-6505 Solaris 9, with Solaris Auditing enabled and certain patches for sshd installed, can generate audit records with an audit-ID of 0 even when the user logging into ssh is not root, which makes it easier for attackers to avoid detection and can make it more difficult to conduct forensics activities.
CVE-2007-6360 Unspecified vulnerability in the Sun eXtended System Control Facility (XSCF) Control Package (XCP) firmware before 1050 on SPARC Enterprise M4000, M5000, M8000, and M9000 servers allows remote attackers to cause a denial of service (reboot) via (1) telnet, (2) ssh, or (3) http network traffic that triggers memory exhaustion.
CVE-2007-5715 DenyHosts 2.6 processes OpenSSH sshd "not listed in AllowUsers" log messages with an incorrect regular expression that does not match an IP address, which might allow remote attackers to avoid detection and blocking when making invalid login attempts with a username not present in AllowUsers, as demonstrated by the root username, a different vulnerability than CVE-2007-4323.
CVE-2007-5686 initscripts in rPath Linux 1 sets insecure permissions for the /var/log/btmp file, which allows local users to obtain sensitive information regarding authentication attempts. NOTE: because sshd detects the insecure permissions and does not log certain events, this also prevents sshd from logging failed authentication attempts by remote attackers.
CVE-2007-5616 ssh-signer in SSH Tectia Client and Server 5.x before 5.2.4, and 5.3.x before 5.3.6, on Unix and Linux allows local users to gain privileges via unspecified vectors.
CVE-2007-5337 Mozilla Firefox before 2.0.0.8 and SeaMonkey before 1.1.5, when running on Linux systems with gnome-vfs support, might allow remote attackers to read arbitrary files on SSH/sftp servers that accept key authentication by creating a web page on the target server, in which the web page contains URIs with (1) smb: or (2) sftp: schemes that access other files from the server.
CVE-2007-4752 ssh in OpenSSH before 4.7 does not properly handle when an untrusted cookie cannot be created and uses a trusted X11 cookie instead, which allows attackers to violate intended policy and gain privileges by causing an X client to be treated as trusted.
CVE-2007-4654 Unspecified vulnerability in SSHield 1.6.1 with OpenSSH 3.0.2p1 on Cisco WebNS 8.20.0.1 on Cisco Content Services Switch (CSS) series 11000 devices allows remote attackers to cause a denial of service (connection slot exhaustion and device crash) via a series of large packets designed to exploit the SSH CRC32 attack detection overflow (CVE-2001-0144), possibly a related issue to CVE-2002-1024.
CVE-2007-4501 Unspecified vulnerability in PassphraseRequester in SSHKeychain before 0.8.2 beta allows attackers to obtain sensitive information (passwords) via unknown vectors, related to "poor protection."
CVE-2007-4500 Unspecified vulnerability in TunnelRunner in SSHKeychain before 0.8.2 beta, and possibly later versions, allows local users to gain privileges via unspecified vectors.
CVE-2007-4361 NETGEAR (formerly Infrant) ReadyNAS RAIDiator before 4.00b2-p2-T1 beta creates a default SSH root password derived from the hardware serial number, which makes it easier for remote attackers to guess the password and obtain login access.
CVE-2007-4360 Unspecified vulnerability in Dell Remote Access Card 4 (DRAC4) with firmware 1.50 Build 02.16 allows remote attackers to cause a denial of service (SSH daemon crash) via certain network traffic, as demonstrated by an "nmap -O" scan with nmap 4.03, possibly related to a Mocana (Mocanada) SSH vulnerability.
CVE-2007-4323 DenyHosts 2.6 does not properly parse sshd log files, which allows remote attackers to add arbitrary hosts to the /etc/hosts.deny file and cause a denial of service by adding arbitrary IP addresses to the sshd log file, as demonstrated by logging in via ssh with a client protocol version identification containing an IP address string, a different vector than CVE-2006-6301.
CVE-2007-4322 BlockHosts before 2.0.4 does not properly parse (1) sshd and (2) vsftpd log files, which allows remote attackers to add arbitrary deny entries to the /etc/hosts.allow file and cause a denial of service by adding arbitrary IP addresses to a daemon log file, as demonstrated by connecting through ssh with a client protocol version identification containing an IP address string, or connecting through ftp with a username containing an IP address string, different vectors than CVE-2007-2765.
CVE-2007-4321 fail2ban 0.8 and earlier does not properly parse sshd log files, which allows remote attackers to add arbitrary hosts to the /etc/hosts.deny file and cause a denial of service by adding arbitrary IP addresses to the sshd log file, as demonstrated by logging in via ssh with a client protocol version identification containing an IP address string, a different vector than CVE-2006-6302.
CVE-2007-2791 Unspecified vulnerability in the Secure Shell (SSH) in HP Tru64 UNIX 5.1B-4 and 5.1B-3 allows remote attackers to identify valid users via unspecified vectors, probably related to timing attacks and AuthInteractiveFailureRandomTimeout.
CVE-2007-2768 OpenSSH, when using OPIE (One-Time Passwords in Everything) for PAM, allows remote attackers to determine the existence of certain user accounts, which displays a different response if the user account exists and is configured to use one-time passwords (OTP), a similar issue to CVE-2007-2243.
CVE-2007-2765 blockhosts.py in BlockHosts before 2.0.3 does not properly parse daemon log files, which allows remote attackers to add arbitrary deny entries to the /etc/hosts.allow file and cause a denial of service by adding arbitrary IP addresses to a daemon log file, as demonstrated by logging in through ssh using a login name containing certain strings with an IP address, which is not properly handled by a regular expression, a related issue to CVE-2006-6301.
CVE-2007-2243 OpenSSH 4.6 and earlier, when ChallengeResponseAuthentication is enabled, allows remote attackers to determine the existence of user accounts by attempting to authenticate via S/KEY, which displays a different response if the user account exists, a similar issue to CVE-2001-1483.
CVE-2007-2063 SSH Tectia Server for IBM z/OS before 5.4.0 uses insecure world-writable permissions for (1) the server pid file, which allows local users to cause arbitrary processes to be stopped, or (2) when _BPX_BATCH_UMASK is missing from the environment, creates HFS files with insecure permissions, which allows local users to read or modify these files and have other unknown impact.
CVE-2007-1654 Buffer overflow in the Ne7sshSftp::addOpenHandle function in ne7ssh_sftp.cpp in NetSieben SSH Library (ne7ssh) before 1.2.1 allows user-assisted remote SFTP servers to cause a denial of service (crash) or possibly execute arbitrary code via multiple file transfers, related to multiple open file handles in SFTP (1) put and (2) get operations.
CVE-2007-1099 dbclient in Dropbear SSH client before 0.49 does not sufficiently warn the user when it detects a hostkey mismatch, which might allow remote attackers to conduct man-in-the-middle attacks.
CVE-2007-1063 The SSH server in Cisco Unified IP Phone 7906G, 7911G, 7941G, 7961G, 7970G, and 7971G, with firmware 8.0(4)SR1 and earlier, uses a hard-coded username and password, which allows remote attackers to access the device.
CVE-2007-0844 The auth_via_key function in pam_ssh.c in pam_ssh before 1.92, when the allow_blank_passphrase option is disabled, allows remote attackers to bypass authentication restrictions and use private encryption keys requiring a blank passphrase by entering a non-blank passphrase.
CVE-2007-0726 The SSH key generation process in OpenSSH in Apple Mac OS X 10.3.9 and 10.4 through 10.4.8 allows remote attackers to cause a denial of service by connecting to the server before SSH has finished creating keys, which causes the keys to be regenerated and can break trust relationships that were based on the original keys.
CVE-2007-0397 The Cisco Security Monitoring, Analysis and Response System (CS-MARS) before 4.2.3 and Adaptive Security Device Manager (ASDM) before 5.2(2.54) do not validate the SSL/TLS certificates or SSH public keys when connecting to devices, which allows remote attackers to spoof those devices to obtain sensitive information or generate incorrect information.
CVE-2006-6608 Unspecified vulnerability in SSH key based authentication in HP Integrated Lights Out (iLO) 1.70 through 1.87, and iLO 2 1.00 through 1.11, on Proliant servers, allows remote attackers to "gain unauthorized access."
CVE-2006-6302 fail2ban 0.7.4 and earlier does not properly parse sshd log files, which allows remote attackers to add arbitrary hosts to the /etc/hosts.deny file and cause a denial of service by adding arbitrary IP addresses to the sshd log file, as demonstrated by logging in via ssh with a login name containing certain strings with an IP address.
CVE-2006-6301 DenyHosts 2.5 does not properly parse sshd log files, which allows remote attackers to add arbitrary hosts to the /etc/hosts.deny file and cause a denial of service by adding arbitrary IP addresses to the sshd log file, as demonstrated by logging in via ssh with a login name containing certain strings with an IP address, which is not properly handled by a regular expression.
CVE-2006-5794 Unspecified vulnerability in the sshd Privilege Separation Monitor in OpenSSH before 4.5 causes weaker verification that authentication has been successful, which might allow attackers to bypass authentication. NOTE: as of 20061108, it is believed that this issue is only exploitable by leveraging vulnerabilities in the unprivileged process, which are not known to exist.
CVE-2006-5484 SSH Tectia Client/Server/Connector 5.1.0 and earlier, Manager 2.2.0 and earlier, and other products, when using an RSA key with exponent 3, removes PKCS-1 padding before generating a hash, which allows remote attackers to forge a PKCS #1 v1.5 signature that is signed by that RSA key and prevents Tectia from correctly verifying X.509 and other certificates that use PKCS #1, a similar issue to CVE-2006-4339.
CVE-2006-4925 packet.c in ssh in OpenSSH allows remote attackers to cause a denial of service (crash) by sending an invalid protocol sequence with USERAUTH_SUCCESS before NEWKEYS, which causes newkeys[mode] to be NULL.
CVE-2006-4924 sshd in OpenSSH before 4.4, when using the version 1 SSH protocol, allows remote attackers to cause a denial of service (CPU consumption) via an SSH packet that contains duplicate blocks, which is not properly handled by the CRC compensation attack detector.
CVE-2006-4316 SSH Tectia Management Agent 2.1.2 allows local users to gain root privileges by running a program called sshd, which is obtained from a process listing when the "Restart" action is selected from the Management server GUI, which causes the agent to locate the pathname of the user's program and restart it with root privileges.
CVE-2006-4315 Unquoted Windows search path vulnerability in multiple SSH Tectia products, including Client/Server/Connector 5.0.0 and 5.0.1 and Client/Server before 4.4.5, and Manager 2.12 and earlier, when running on Windows, might allow local users to gain privileges via a malicious program file under "Program Files" or its subdirectories.
CVE-2006-3631 Unspecified vulnerability in the SSH dissector in Wireshark (aka Ethereal) 0.9.10 to 0.99.0 allows remote attackers to cause a denial of service (infinite loop) via unknown attack vectors.
CVE-2006-3470 The Dell Openmanage CD launches X11 and SSH daemons that do not require authentication, which allows remote attackers to gain privileges.
CVE-2006-2421 Stack-based buffer overflow in Pragma FortressSSH 4.0.7.20 allows remote attackers to execute arbitrary code via long SSH_MSG_KEXINIT messages, which may cause an overflow when being logged. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.
CVE-2006-2407 Stack-based buffer overflow in (1) WeOnlyDo wodSSHServer ActiveX Component 1.2.7 and 1.3.3 DEMO, as used in other products including (2) FreeSSHd 1.0.9 and (3) freeFTPd 1.0.10, allows remote attackers to execute arbitrary code via a long key exchange algorithm string.
CVE-2006-1283 opiepasswd in One-Time Passwords in Everything (OPIE) in FreeBSD 4.10-RELEASE-p22 through 6.1-STABLE before 20060322 uses the getlogin function to determine the invoking user account, which might allow local users to configure OPIE access to the root account and possibly gain root privileges if a root shell is permitted by the configuration of the wheel group or sshd.
CVE-2006-1206 Matt Johnston Dropbear SSH server 0.47 and earlier, as used in embedded Linux devices and on general-purpose operating systems, allows remote attackers to cause a denial of service (connection slot exhaustion) via a large number of connection attempts that exceeds the MAX_UNAUTH_CLIENTS defined value of 30.
CVE-2006-0883 OpenSSH on FreeBSD 5.3 and 5.4, when used with OpenPAM, does not properly handle when a forked child process terminates during PAM authentication, which allows remote attackers to cause a denial of service (client connection refusal) by connecting multiple times to the SSH server, waiting for the password prompt, then disconnecting.
CVE-2006-0705 Format string vulnerability in a logging function as used by various SFTP servers, including (1) AttachmateWRQ Reflection for Secure IT UNIX Server before 6.0.0.9, (2) Reflection for Secure IT Windows Server before 6.0 build 38, (3) F-Secure SSH Server for Windows before 5.3 build 35, (4) F-Secure SSH Server for UNIX 3.0 through 5.0.8, (5) SSH Tectia Server 4.3.6 and earlier and 4.4.0, and (6) SSH Shell Server 3.2.9 and earlier, allows remote authenticated users to execute arbitrary commands via unspecified vectors, involving crafted filenames and the stat command.
CVE-2005-4310 SSH Tectia Server 5.0.0 (A, F, and T), when allowing host-based authentication only, allows users to log in with the wrong credentials.
CVE-2005-2984 Avocent CCM console server running firmware 2.1 CCM4850 allows remote authenticated attackers to bypass port restrictions by connecting to the server via SSH and using the connect command to access the serial port.
CVE-2005-2872 The ipt_recent kernel module (ipt_recent.c) in Linux kernel before 2.6.12, when running on 64-bit processors such as AMD64, allows remote attackers to cause a denial of service (kernel panic) via certain attacks such as SSH brute force, which leads to memset calls using a length based on the u_int32_t type, acting on an array of unsigned long elements, a different vulnerability than CVE-2005-2873.
CVE-2005-2798 sshd in OpenSSH before 4.2, when GSSAPIDelegateCredentials is enabled, allows GSSAPI credentials to be delegated to clients who log in using non-GSSAPI methods, which could cause those credentials to be exposed to untrusted users or hosts.
CVE-2005-2771 WRQ Reflection for Secure IT Windows Server 6.0 (formerly known as F-Secure SSH server) processes access and deny lists in a case-sensitive manner, when previous versions were case-insensitive, which might allow remote attackers to bypass intended restrictions and login to accounts that should be denied.
CVE-2005-2770 WRQ Reflection for Secure IT Windows Server 6.0 (formerly known as F-Secure SSH server) does not properly handle when the Windows Administrator or Guest accounts are renamed after SSH key authentication has been configured, which allows remote attackers to use the original names during login.
CVE-2005-2666 SSH, as implemented in OpenSSH before 4.0 and possibly other implementations, stores hostnames, IP addresses, and keys in plaintext in the known_hosts file, which makes it easier for an attacker that has compromised an SSH user's account to generate a list of additional targets that are more likely to have the same password or key.
CVE-2005-2329 MRV Communications In-Reach LX-8000S, LX-4000S, and LX-1000S 3.5.0, when using SSH public key authentication, does not properly restrict access to ports, which allows remote authenticated users to access the consoles of other users.
CVE-2005-2189 Lantronix SecureLinx console server running firmware 2.0 and 3.0 stores /etc/ssh under the web document root with insufficient access control, which allows remote attackers to obtain sensitive information such as SSH private keys.
CVE-2005-2146 SSH Tectia Server 4.3.1 and earlier, and SSH Secure Shell for Windows Servers, uses insecure permissions when generating the Secure Shell host identification key, which allows local users to access the key and spoof the server.
CVE-2005-1627 Unknown vulnerability in Viewglob before 2.0.1, related to "a potential security issue with the Viewglob display and ssh X forwarding," has unknown impact.
CVE-2005-1560 The SSH module in Neteyes Nexusway allows remote attackers to execute arbitrary commands via shell metacharacters in arguments to certain commands, as demonstrated using ping and traceroute.
CVE-2005-1021 Memory leak in Secure Shell (SSH) in Cisco IOS 12.0 through 12.3, when authenticating against a TACACS+ server, allows remote attackers to cause a denial of service (memory consumption) via an incorrect username or password.
CVE-2005-1020 Secure Shell (SSH) 2 in Cisco IOS 12.0 through 12.3 allows remote attackers to cause a denial of service (device reload) (1) via a username that contains a domain name when using a TACACS+ server to authenticate, (2) when a new SSH session is in the login phase and a currently logged in user issues a send command, or (3) when IOS is logging messages and an SSH session is terminated while the server is sending data.
CVE-2004-2760 sshd in OpenSSH 3.5p1, when PermitRootLogin is disabled, immediately closes the TCP connection after a root login attempt with the correct password, but leaves the connection open after an attempt with an incorrect password, which makes it easier for remote attackers to guess the password by observing the connection state, a different vulnerability than CVE-2003-0190. NOTE: it could be argued that in most environments, this does not cross privilege boundaries without requiring leverage of a separate vulnerability.
CVE-2004-2486 The DSS verification code in Dropbear SSH Server before 0.43 frees uninitialized variables, which might allow remote attackers to gain access.
CVE-2004-2004 The Live CD in SUSE LINUX 9.1 Personal edition is configured without a password for root, which allows remote attackers to gain privileges via SSH.
CVE-2004-1653 The default configuration for OpenSSH enables AllowTcpForwarding, which could allow remote authenticated users to perform a port bounce, when configured with an anonymous access program such as AnonCVS.
CVE-2004-1446 Unknown vulnerability in ScreenOS in Juniper Networks NetScreen firewall 3.x through 5.x allows remote attackers to cause a denial of service (device reboot or hang) via a crafted SSH v1 packet.
CVE-2004-1357 The Secure Shell (SSH) Daemon (SSHD) in Sun Solaris 9 does not properly log IP addresses when SSHD is configured with the ListenAddress as 0.0.0.0, which makes it easier for remote attackers to hide the source of their activities.
CVE-2004-1008 Integer signedness error in the ssh2_rdpkt function in PuTTY before 0.56 allows remote attackers to execute arbitrary code via a SSH2_MSG_DEBUG packet with a modified stringlen parameter, which leads to a buffer overflow.
CVE-2004-0551 Cisco CatOS 5.x before 5.5(20) through 8.x before 8.2(2) and 8.3(2)GLX, as used in Catalyst switches, allows remote attackers to cause a denial of service (system crash and reload) by sending invalid packets instead of the final ACK portion of the three-way handshake to the (1) Telnet, (2) HTTP, or (3) SSH services, aka "TCP-ACK DoS attack."
CVE-2004-0518 Unknown vulnerability in AppleFileServer for Mac OS X 10.3.4, related to "the use of SSH and reporting errors," has unknown impact and attack vectors.
CVE-2004-0489 Argument injection vulnerability in the SSH URI handler for Safari on Mac OS 10.3.3 and earlier allows remote attackers to (1) execute arbitrary code via the ProxyCommand option or (2) conduct port forwarding via the -R option.
CVE-2004-0413 libsvn_ra_svn in Subversion 1.0.4 trusts the length field of (1) svn://, (2) svn+ssh://, and (3) other svn protocol URL strings, which allows remote attackers to cause a denial of service (memory consumption) and possibly execute arbitrary code via an integer overflow that leads to a heap-based buffer overflow.
CVE-2004-0411 The URI handlers in Konqueror for KDE 3.2.2 and earlier do not properly filter "-" characters that begin a hostname in a (1) telnet, (2) rlogin, (3) ssh, or (4) mailto URI, which allows remote attackers to manipulate the options that are passed to the associated programs, possibly to read arbitrary files or execute arbitrary code.
CVE-2003-1562 sshd in OpenSSH 3.6.1p2 and earlier, when PermitRootLogin is disabled and using PAM keyboard-interactive authentication, does not insert a delay after a root login attempt with the correct password, which makes it easier for remote attackers to use timing differences to determine if the password step of a multi-step authentication is successful, a different vulnerability than CVE-2003-0190.
CVE-2003-1120 Race condition in SSH Tectia Server 4.0.3 and 4.0.4 for Unix, when the password change plugin (ssh-passwd-plugin) is enabled, allows local users to obtain the server's private key.
CVE-2003-1119 SSH Secure Shell before 3.2.9 allows remote attackers to cause a denial of service via malformed BER/DER packets.
CVE-2003-0826 lsh daemon (lshd) does not properly return from certain functions in (1) read_line.c, (2) channel_commands.c, or (3) client_keyexchange.c when long input is provided, which could allow remote attackers to execute arbitrary code via a heap-based buffer overflow attack.
CVE-2003-0724 ssh on HP Tru64 UNIX 5.1B and 5.1A does not properly handle RSA signatures when digital certificates and RSA keys are used, which could allow local and remote attackers to gain privileges.
CVE-2003-0693 A "buffer management error" in buffer_append_space of buffer.c for OpenSSH before 3.7 may allow remote attackers to execute arbitrary code by causing an incorrect amount of memory to be freed and corrupting the heap, a different vulnerability than CVE-2003-0695.
CVE-2003-0259 Cisco VPN 3000 series concentrators and Cisco VPN 3002 Hardware Client 2.x.x through 3.6.7 allows remote attackers to cause a denial of service (reload) via a malformed SSH initialization packet.
CVE-2003-0048 PuTTY 0.53b and earlier does not clear logon credentials from memory, including plaintext passwords, which could allow attackers with access to memory to steal the SSH credentials.
CVE-2003-0047 SSH2 clients for VanDyke (1) SecureCRT 4.0.2 and 3.4.7, (2) SecureFX 2.1.2 and 2.0.4, and (3) Entunnel 1.0.2 and earlier, do not clear logon credentials from memory, including plaintext passwords, which could allow attackers with access to memory to steal the SSH credentials.
CVE-2003-0046 AbsoluteTelnet SSH2 client does not clear logon credentials from memory, including plaintext passwords, which could allow attackers with access to memory to steal the SSH credentials.
CVE-2002-2379 ** DISPUTED ** Cisco AS5350 IOS 12.2(11)T with access control lists (ACLs) applied and possibly with ssh running allows remote attackers to cause a denial of service (crash) via a port scan, possibly due to an ssh bug. NOTE: this issue could not be reproduced by the vendor.
CVE-2002-1715 SSH 1 through 3, and possibly other versions, allows local users to bypass restricted shells such as rbash or rksh by uploading a script to a world-writeable directory, then executing that script to gain normal shell access.
CVE-2002-1646 SSH Secure Shell for Servers 3.0.0 to 3.1.1 allows remote attackers to override the AllowedAuthentications configuration and use less secure authentication schemes (e.g. password) than configured for the server.
CVE-2002-1645 Buffer overflow in the URL catcher feature for SSH Secure Shell for Workstations client 3.1 to 3.2.0 allows remote attackers to execute arbitrary code via a long URL.
CVE-2002-1644 SSH Secure Shell for Servers and SSH Secure Shell for Workstations 2.0.13 through 3.2.1, when running without a PTY, does not call setsid to remove the child process from the process group of the parent process, which allows attackers to gain certain privileges.
CVE-2002-1547 Netscreen running ScreenOS 4.0.0r6 and earlier allows remote attackers to cause a denial of service via a malformed SSH packet to the Secure Command Shell (SCS) management interface, as demonstrated via certain CRC32 exploits, a different vulnerability than CVE-2001-0144.
CVE-2002-1520 The CLI interface for WatchGuard Firebox Vclass 3.2 and earlier, and RSSA Appliance 3.0.2, does not properly close the SSH connection when a -N option is provided during authentication, which allows remote attackers to access CLI with administrator privileges.
CVE-2002-1469 scponly does not properly verify the path when finding the (1) scp or (2) sftp-server programs, which could allow remote authenticated users to bypass access controls by uploading malicious programs and modifying the PATH variable in $HOME/.ssh/environment to locate those programs.
CVE-2002-1360 Multiple SSH2 servers and clients do not properly handle strings with null characters in them when the string length is specified by a length field, which could allow remote attackers to cause a denial of service or possibly execute arbitrary code due to interactions with the use of null-terminated strings as implemented using languages such as C, as demonstrated by the SSHredder SSH protocol test suite.
CVE-2002-1359 Multiple SSH2 servers and clients do not properly handle large packets or large fields, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code via buffer overflow attacks, as demonstrated by the SSHredder SSH protocol test suite.
CVE-2002-1358 Multiple SSH2 servers and clients do not properly handle lists with empty elements or strings, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.
CVE-2002-1357 Multiple SSH2 servers and clients do not properly handle packets or data elements with incorrect length specifiers, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.
CVE-2002-1094 Information leaks in Cisco VPN 3000 Concentrator 2.x.x and 3.x.x before 3.5.4 allow remote attackers to obtain potentially sensitive information via the (1) SSH banner, (2) FTP banner, or (3) an incorrect HTTP request.
CVE-2002-1059 Buffer overflow in Van Dyke SecureCRT SSH client before 3.4.6, and 4.x before 4.0 beta 3, allows an SSH server to execute arbitrary code via a long SSH1 protocol version string.
CVE-2002-1024 Cisco IOS 12.0 through 12.2, when supporting SSH, allows remote attackers to cause a denial of service (CPU consumption) via a large packet that was designed to exploit the SSH CRC32 attack detection overflow (CVE-2001-0144).
CVE-2002-0883 Vulnerability in Compaq ProLiant BL e-Class Integrated Administrator 1.0 and 1.10, allows authenticated users with Telnet, SSH, or console access to conduct unauthorized activities.
CVE-2002-0765 sshd in OpenSSH 3.2.2, when using YP with netgroups and under certain conditions, may allow users to successfully authenticate and log in with another user's password.
CVE-2002-0640 Buffer overflow in sshd in OpenSSH 2.3.1 through 3.3 may allow remote attackers to execute arbitrary code via a large number of responses during challenge response authentication when OpenBSD is using PAM modules with interactive keyboard authentication (PAMAuthenticationViaKbdInt).
CVE-2002-0639 Integer overflow in sshd in OpenSSH 2.9.9 through 3.3 allows remote attackers to execute arbitrary code during challenge response authentication (ChallengeResponseAuthentication) when OpenSSH is using SKEY or BSD_AUTH authentication.
CVE-2002-0460 Bitvise WinSSHD before 2002-03-16 allows remote attackers to cause a denial of service (resource exhaustion) via a large number of incomplete connections that are not properly terminated, which are not properly freed by SSHd.
CVE-2001-1585 SSH protocol 2 (aka SSH-2) public key authentication in the development snapshot of OpenSSH 2.3.1, available from 2001-01-18 through 2001-02-08, does not perform a challenge-response step to ensure that the client has the proper private key, which allows remote attackers to bypass authentication as other users by supplying a public key from that user's authorized_keys file.
CVE-2001-1476 SSH before 2.0, with RC4 encryption and the "disallow NULL passwords" option enabled, makes it easier for remote attackers to guess portions of user passwords by replaying user sessions with certain modifications, which trigger different messages depending on whether the guess is correct or not.
CVE-2001-1475 SSH before 2.0, when using RC4 and password authentication, allows remote attackers to replay messages until a new server key (VK) is generated.
CVE-2001-1474 SSH before 2.0 disables host key checking when connecting to the localhost, which allows remote attackers to silently redirect connections to the localhost by poisoning the client's DNS cache.
CVE-2001-1473 The SSH-1 protocol allows remote servers to conduct man-in-the-middle attacks and replay a client challenge response to a target server by creating a Session ID that matches the Session ID of the target, but which uses a public key pair that is weaker than the target's public key, which allows the attacker to compute the corresponding private key and use the target's Session ID with the compromised key pair to masquerade as the target.
CVE-2001-1466 Buffer overflow in VanDyke SecureCRT before 3.4.2, when using the SSH-1 protocol, allows remote attackers to execute arbitrary code via a long (1) username or (2) password.
CVE-2001-1380 OpenSSH before 2.9.9, while using keypairs and multiple keys of different types in the ~/.ssh/authorized_keys2 file, may not properly handle the "from" option associated with a key, which could allow remote attackers to login from unauthorized IP addresses.
CVE-2001-0572 The SSH protocols 1 and 2 (aka SSH-2) as implemented in OpenSSH and other packages have various weaknesses which can allow a remote attacker to obtain the following information via sniffing: (1) password lengths or ranges of lengths, which simplifies brute force password guessing, (2) whether RSA or DSA authentication is being used, (3) the number of authorized_keys in RSA authentication, or (4) the lengths of shell commands.
CVE-2001-0553 SSH Secure Shell 3.0.0 on Unix systems does not properly perform password authentication to the sshd2 daemon, which allows local users to gain access to accounts with short password fields, such as locked accounts that use "NP" in the password field.
CVE-2001-0529 OpenSSH version 2.9 and earlier, with X forwarding enabled, allows a local attacker to delete any file named 'cookies' via a symlink attack.
CVE-2001-0471 SSH daemon version 1 (aka SSHD-1 or SSH-1) 1.2.30 and earlier does not log repeated login attempts, which could allow remote attackers to compromise accounts without detection via a brute force attack.
CVE-2001-0364 SSH Communications Security sshd 2.4 for Windows allows remote attackers to create a denial of service via a large number of simultaneous connections.
CVE-2001-0361 Implementations of SSH version 1.5, including (1) OpenSSH up to version 2.3.0, (2) AppGate, and (3) ssh-1 up to version 1.2.31, in certain configurations, allow a remote attacker to decrypt and/or alter traffic via a "Bleichenbacher attack" on PKCS#1 version 1.5.
CVE-2001-0259 ssh-keygen in ssh 1.2.27 - 1.2.30 with Secure-RPC can allow local attackers to recover a SUN-DES-1 magic phrase generated by another user, which the attacker can use to decrypt that user's private key file.
CVE-2001-0156 VShell SSH gateway 1.0.1 and earlier has a default port forwarding rule of 0.0.0.0/0.0.0.0, which could allow local users to conduct arbitrary port forwarding to other systems.
CVE-2001-0155 Format string vulnerability in VShell SSH gateway 1.0.1 and earlier allows remote attackers to execute arbitrary commands via a user name that contains format string specifiers.
CVE-2001-0144 CORE SDI SSH1 CRC-32 compensation attack detector allows remote attackers to execute arbitrary commands on an SSH server or client via an integer overflow.
CVE-2001-0080 Cisco Catalyst 6000, 5000, or 4000 switches allow remote attackers to cause a denial of service by connecting to the SSH service with a non-SSH client, which generates a protocol mismatch error.
CVE-2000-1169 OpenSSH SSH client before 2.3.0 does not properly disable X11 or agent forwarding, which could allow a malicious SSH server to gain access to the X11 display and sniff X11 events, or gain access to the ssh-agent.
CVE-2000-0999 Format string vulnerabilities in OpenBSD ssh program (and possibly other BSD-based operating systems) allow attackers to gain root privileges.
CVE-2000-0992 Directory traversal vulnerability in scp in sshd 1.2.xx allows a remote malicious scp server to overwrite arbitrary files via a .. (dot dot) attack.
CVE-2000-0784 sshd program in the Rapidstream 2.1 Beta VPN appliance has a hard-coded "rsadmin" account with a null password, which allows remote attackers to execute arbitrary commands via ssh.
CVE-2000-0575 SSH 1.2.27 with Kerberos authentication support stores Kerberos tickets in a file which is created in the current directory of the user who is logging in, which could allow remote attackers to sniff the ticket cache if the home directory is installed on NFS.
CVE-2000-0532 A FreeBSD patch for SSH on 2000-01-14 configures ssh to listen on port 722 as well as port 22, which might allow remote attackers to access SSH through port 722 even if port 22 is otherwise filtered.
CVE-2000-0525 OpenSSH does not properly drop privileges when the UseLogin option is enabled, which allows local users to execute arbitrary commands by providing the command to the ssh daemon.
CVE-2000-0217 The default configuration of SSH allows X forwarding, which could allow a remote attacker to control a client's X sessions via a malicious xauth program.
CVE-2000-0143 The SSH protocol server sshd allows local users without shell access to redirect a TCP connection through a service that uses the standard system password database for authentication, such as POP or FTP.
CVE-1999-1352 mknod in Linux 2.2 follows symbolic links, which could allow local users to overwrite files or gain privileges.
CVE-1999-1321 Buffer overflow in ssh 1.2.26 client with Kerberos V enabled could allow remote attackers to cause a denial of service or execute arbitrary commands via a long DNS hostname that is not properly handled during TGT ticket passing.
CVE-1999-1231 ssh 2.0.12, and possibly other versions, allows valid user names to attempt to enter the correct password multiple times, but only prompts an invalid user name for a password once, which allows remote attackers to determine user account names on the server.
CVE-1999-1159 SSH 2.0.11 and earlier allows local users to request remote forwarding from privileged ports without being root.
CVE-1999-1085 SSH 1.2.25, 1.2.23, and other versions, when used in in CBC (Cipher Block Chaining) or CFB (Cipher Feedback 64 bits) modes, allows remote attackers to insert arbitrary data into an existing stream between an SSH client and server by using a known plaintext attack and computing a valid CRC-32 checksum for the packet, aka the "SSH insertion attack."
CVE-1999-1029 SSH server (sshd2) before 2.0.12 does not properly record login attempts if the connection is closed before the maximum number of tries, allowing a remote attacker to guess the password without showing up in the audit logs.
CVE-1999-1010 An SSH 1.2.27 server allows a client to use the "none" cipher, even if it is not allowed by the server policy.
CVE-1999-0787 The SSH authentication agent follows symlinks via a UNIX domain socket.
CVE-1999-0634 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: None. Reason: this candidate is solely about a configuration that does not directly introduce security vulnerabilities, so it is more appropriate to cover under the Common Configuration Enumeration (CCE). Notes: the former description is: "The SSH service is running."
CVE-1999-0547 An SSH server allows authentication through the .rhosts file.
CVE-1999-0398 In some instances of SSH 1.2.27 and 2.0.11 on Linux systems, SSH will allow users with expired accounts to login.
CVE-1999-0310 SSH 1.2.25 on HP-UX allows access to new user accounts.
CVE-1999-0248 A race condition in the authentication agent mechanism of sshd 1.2.17 allows an attacker to steal another user's credentials.
CVE-1999-0013 Stolen credentials from SSH clients via ssh-agent program, allowing other local users to access remote accounts belonging to the ssh-agent user.
  
You can also search by reference using the CVE Reference Maps.
For More Information:  CVE Request Web Form (select “Other” from dropdown)