|
|
Search Results
There are 77 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2024-38528 | nptd-rs is a tool for synchronizing your computer's clock, implementing the NTP and NTS protocols. There is a missing limit for accepted NTS-KE connections. This allows an unauthenticated remote attacker to crash ntpd-rs when an NTS-KE server is configured. Non NTS-KE server configurations, such as the default ntpd-rs configuration, are unaffected. This vulnerability has been patched in version 1.1.3. |
| CVE-2023-4012 | ntpd will crash if the server is not NTS-enabled (no certificate) and it receives an NTS-enabled client request (mode 3). |
| CVE-2023-33192 | ntpd-rs is an NTP implementation written in Rust. ntpd-rs does not validate the length of NTS cookies in received NTP packets to the server. An attacker can crash the server by sending a specially crafted NTP packet containing a cookie shorter than what the server expects. The server also crashes when it is not configured to handle NTS packets. The issue was caused by improper slice indexing. The indexing operations were replaced by safer alternatives that do not crash the ntpd-rs server process but instead properly handle the error condition. A patch was released in version 0.3.3. |
| CVE-2023-26555 | praecis_parse in ntpd/refclock_palisade.c in NTP 4.2.8p15 has an out-of-bounds write. Any attack method would be complex, e.g., with a manipulated GPS receiver. |
| CVE-2023-26554 | mstolfp in libntp/mstolfp.c in NTP 4.2.8p15 has an out-of-bounds write when adding a '\0' character. An adversary may be able to attack a client ntpq process, but cannot attack ntpd. |
| CVE-2023-26553 | mstolfp in libntp/mstolfp.c in NTP 4.2.8p15 has an out-of-bounds write when copying the trailing number. An adversary may be able to attack a client ntpq process, but cannot attack ntpd. |
| CVE-2023-26552 | mstolfp in libntp/mstolfp.c in NTP 4.2.8p15 has an out-of-bounds write when adding a decimal point. An adversary may be able to attack a client ntpq process, but cannot attack ntpd. |
| CVE-2023-26551 | mstolfp in libntp/mstolfp.c in NTP 4.2.8p15 has an out-of-bounds write in the cp<cpdec while loop. An adversary may be able to attack a client ntpq process, but cannot attack ntpd. |
| CVE-2022-48198 | The ntpd_driver component before 1.3.0 and 2.x before 2.2.0 for Robot Operating System (ROS) allows attackers, who control the source code of a different node in the same ROS application, to change a robot's behavior. This occurs because a topic name depends on the attacker-controlled time_ref_topic parameter. |
| CVE-2021-22212 | ntpkeygen can generate keys that ntpd fails to parse. NTPsec 1.2.0 allows ntpkeygen to generate keys with '#' characters. ntpd then either pads, shortens the key, or fails to load these keys entirely, depending on the key type and the placement of the '#'. This results in the administrator not being able to use the keys as expected or the keys are shorter than expected and easier to brute-force, possibly resulting in MITM attacks between ntp clients and ntp servers. For short AES128 keys, ntpd generates a warning that it is padding them. |
| CVE-2021-0227 | An improper restriction of operations within the bounds of a memory buffer vulnerability in Juniper Networks Junos OS J-Web on SRX Series devices allows an attacker to cause Denial of Service (DoS) by sending certain crafted HTTP packets. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. When this issue occurs, web-management, NTP daemon (ntpd) and Layer 2 Control Protocol process (L2CPD) daemons might crash. This issue affects Juniper Networks Junos OS on SRX Series: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S2, 20.1R2; |
| CVE-2020-15025 | ntpd in ntp 4.2.8 before 4.2.8p15 and 4.3.x before 4.3.101 allows remote attackers to cause a denial of service (memory consumption) by sending packets, because memory is not freed in situations where a CMAC key is used and associated with a CMAC algorithm in the ntp.keys file. |
| CVE-2020-13817 | ntpd in ntp before 4.2.8p14 and 4.3.x before 4.3.100 allows remote attackers to cause a denial of service (daemon exit or system time change) by predicting transmit timestamps for use in spoofed packets. The victim must be relying on unauthenticated IPv4 time sources. There must be an off-path attacker who can query time from the victim's ntpd instance. |
| CVE-2020-11868 | ntpd in ntp before 4.2.8p14 and 4.3.x before 4.3.100 allows an off-path attacker to block unauthenticated synchronization via a server mode packet with a spoofed source IP address, because transmissions are rescheduled even when a packet lacks a valid origin timestamp. |
| CVE-2019-6445 | An issue was discovered in NTPsec before 1.1.3. An authenticated attacker can cause a NULL pointer dereference and ntpd crash in ntp_control.c, related to ctl_getitem. |
| CVE-2019-6444 | An issue was discovered in NTPsec before 1.1.3. process_control() in ntp_control.c has a stack-based buffer over-read because attacker-controlled data is dereferenced by ntohl() in ntpd. |
| CVE-2019-6443 | An issue was discovered in NTPsec before 1.1.3. Because of a bug in ctl_getitem, there is a stack-based buffer over-read in read_sysvars in ntp_control.c in ntpd. |
| CVE-2019-6442 | An issue was discovered in NTPsec before 1.1.3. An authenticated attacker can write one byte out of bounds in ntpd via a malformed config request, related to config_remotely in ntp_config.c, yyparse in ntp_parser.tab.c, and yyerror in ntp_parser.y. |
| CVE-2018-8956 | ntpd in ntp 4.2.8p10, 4.2.8p11, 4.2.8p12 and 4.2.8p13 allow remote attackers to prevent a broadcast client from synchronizing its clock with a broadcast NTP server via soofed mode 3 and mode 5 packets. The attacker must either be a part of the same broadcast network or control a slave in that broadcast network that can capture certain required packets on the attacker's behalf and send them to the attacker. |
| CVE-2018-7185 | The protocol engine in ntp 4.2.6 before 4.2.8p11 allows a remote attackers to cause a denial of service (disruption) by continually sending a packet with a zero-origin timestamp and source IP address of the "other side" of an interleaved association causing the victim ntpd to reset its association. |
| CVE-2018-7184 | ntpd in ntp 4.2.8p4 before 4.2.8p11 drops bad packets before updating the "received" timestamp, which allows remote attackers to cause a denial of service (disruption) by sending a packet with a zero-origin timestamp causing the association to reset and setting the contents of the packet as the most recent timestamp. This issue is a result of an incomplete fix for CVE-2015-7704. |
| CVE-2018-7182 | The ctl_getitem method in ntpd in ntp-4.2.8p6 before 4.2.8p11 allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted mode 6 packet with a ntpd instance from 4.2.8p6 through 4.2.8p10. |
| CVE-2018-7170 | ntpd in ntp 4.2.x before 4.2.8p7 and 4.3.x before 4.3.92 allows authenticated users that know the private symmetric key to create arbitrarily-many ephemeral associations in order to win the clock selection of ntpd and modify a victim's clock via a Sybil attack. This issue exists because of an incomplete fix for CVE-2016-1549. |
| CVE-2018-2763 | Vulnerability in the Solaris component of Oracle Sun Systems Products Suite (subcomponent: NTPD). The supported version that is affected is 11.3. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Solaris executes to compromise Solaris. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Solaris accessible data. CVSS 3.0 Base Score 3.3 (Integrity impacts). CVSS Vector: (CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:N). |
| CVE-2017-6464 | NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote attackers to cause a denial of service (ntpd crash) via a malformed mode configuration directive. |
| CVE-2016-9312 | ntpd in NTP before 4.2.8p9, when running on Windows, allows remote attackers to cause a denial of service via a large UDP packet. |
| CVE-2016-9311 | ntpd in NTP before 4.2.8p9, when the trap service is enabled, allows remote attackers to cause a denial of service (NULL pointer dereference and crash) via a crafted packet. |
| CVE-2016-9310 | The control mode (mode 6) functionality in ntpd in NTP before 4.2.8p9 allows remote attackers to set or unset traps via a crafted control mode packet. |
| CVE-2016-9042 | An exploitable denial of service vulnerability exists in the origin timestamp check functionality of ntpd 4.2.8p9. A specially crafted unauthenticated network packet can be used to reset the expected origin timestamp for target peers. Legitimate replies from targeted peers will fail the origin timestamp check (TEST2) causing the reply to be dropped and creating a denial of service condition. |
| CVE-2016-7433 | NTP before 4.2.8p9 does not properly perform the initial sync calculations, which allows remote attackers to unspecified impact via unknown vectors, related to a "root distance that did not include the peer dispersion." |
| CVE-2016-7431 | NTP before 4.2.8p9 allows remote attackers to bypass the origin timestamp protection mechanism via an origin timestamp of zero. NOTE: this vulnerability exists because of a CVE-2015-8138 regression. |
| CVE-2016-7428 | ntpd in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (reject broadcast mode packets) via the poll interval in a broadcast packet. |
| CVE-2016-7427 | The broadcast mode replay prevention functionality in ntpd in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (reject broadcast mode packets) via a crafted broadcast mode packet. |
| CVE-2016-5117 | OpenNTPD before 6.0p1 does not validate the CN for HTTPS constraint requests, which allows remote attackers to bypass the man-in-the-middle mitigations via a crafted timestamp constraint with a valid certificate. |
| CVE-2016-4957 | ntpd in NTP before 4.2.8p8 allows remote attackers to cause a denial of service (daemon crash) via a crypto-NAK packet. NOTE: this vulnerability exists because of an incorrect fix for CVE-2016-1547. |
| CVE-2016-4956 | ntpd in NTP 4.x before 4.2.8p8 allows remote attackers to cause a denial of service (interleaved-mode transition and time change) via a spoofed broadcast packet. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-1548. |
| CVE-2016-4955 | ntpd in NTP 4.x before 4.2.8p8, when autokey is enabled, allows remote attackers to cause a denial of service (peer-variable clearing and association outage) by sending (1) a spoofed crypto-NAK packet or (2) a packet with an incorrect MAC value at a certain time. |
| CVE-2016-4954 | The process_packet function in ntp_proto.c in ntpd in NTP 4.x before 4.2.8p8 allows remote attackers to cause a denial of service (peer-variable modification) by sending spoofed packets from many source IP addresses in a certain scenario, as demonstrated by triggering an incorrect leap indication. |
| CVE-2016-4953 | ntpd in NTP 4.x before 4.2.8p8 allows remote attackers to cause a denial of service (ephemeral-association demobilization) by sending a spoofed crypto-NAK packet with incorrect authentication data at a certain time. |
| CVE-2016-2519 | ntpd in NTP before 4.2.8p7 and 4.3.x before 4.3.92 allows remote attackers to cause a denial of service (ntpd abort) by a large request data value, which triggers the ctl_getitem function to return a NULL value. |
| CVE-2016-2517 | NTP before 4.2.8p7 and 4.3.x before 4.3.92 allows remote attackers to cause a denial of service (prevent subsequent authentication) by leveraging knowledge of the controlkey or requestkey and sending a crafted packet to ntpd, which changes the value of trustedkey, controlkey, or requestkey. NOTE: this vulnerability exists because of a CVE-2016-2516 regression. |
| CVE-2016-2516 | NTP before 4.2.8p7 and 4.3.x before 4.3.92, when mode7 is enabled, allows remote attackers to cause a denial of service (ntpd abort) by using the same IP address multiple times in an unconfig directive. |
| CVE-2016-1551 | ntpd in NTP 4.2.8p3 and NTPsec a5fb34b9cc89b92a8fef2f459004865c93bb7f92 relies on the underlying operating system to protect it from requests that impersonate reference clocks. Because reference clocks are treated like other peers and stored in the same structure, any packet with a source ip address of a reference clock (127.127.1.1 for example) that reaches the receive() function will match that reference clock's peer record and will be treated as a trusted peer. Any system that lacks the typical martian packet filtering which would block these packets is in danger of having its time controlled by an attacker. |
| CVE-2016-1549 | A malicious authenticated peer can create arbitrarily-many ephemeral associations in order to win the clock selection algorithm in ntpd in NTP 4.2.8p4 and earlier and NTPsec 3e160db8dc248a0bcb053b56a80167dc742d2b74 and a5fb34b9cc89b92a8fef2f459004865c93bb7f92 and modify a victim's clock. |
| CVE-2016-1548 | An attacker can spoof a packet from a legitimate ntpd server with an origin timestamp that matches the peer->dst timestamp recorded for that server. After making this switch, the client in NTP 4.2.8p4 and earlier and NTPSec aa48d001683e5b791a743ec9c575aaf7d867a2b0c will reject all future legitimate server responses. It is possible to force the victim client to move time after the mode has been changed. ntpq gives no indication that the mode has been switched. |
| CVE-2015-7977 | ntpd in NTP before 4.2.8p6 and 4.3.x before 4.3.90 allows remote attackers to cause a denial of service (NULL pointer dereference) via a ntpdc reslist command. |
| CVE-2015-7871 | Crypto-NAK packets in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to bypass authentication. |
| CVE-2015-7855 | The decodenetnum function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (assertion failure) via a 6 or mode 7 packet containing a long data value. |
| CVE-2015-7853 | The datalen parameter in the refclock driver in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to execute arbitrary code or cause a denial of service (crash) via a negative input value. |
| CVE-2015-7851 | Directory traversal vulnerability in the save_config function in ntpd in ntp_control.c in NTP before 4.2.8p4, when used on systems that do not use '\' or '/' characters for directory separation such as OpenVMS, allows remote authenticated users to overwrite arbitrary files. |
| CVE-2015-7850 | ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote authenticated users to cause a denial of service (infinite loop or crash) by pointing the key file at the log file. |
| CVE-2015-7849 | Use-after-free vulnerability in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote authenticated users to possibly execute arbitrary code or cause a denial of service (crash) via crafted packets. |
| CVE-2015-7705 | The rate limiting feature in NTP 4.x before 4.2.8p4 and 4.3.x before 4.3.77 allows remote attackers to have unspecified impact via a large number of crafted requests. |
| CVE-2015-7704 | The ntpd client in NTP 4.x before 4.2.8p4 and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service via a number of crafted "KOD" messages. |
| CVE-2015-7703 | The "pidfile" or "driftfile" directives in NTP ntpd 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77, when ntpd is configured to allow remote configuration, allows remote attackers with an IP address that is allowed to send configuration requests, and with knowledge of the remote configuration password to write to arbitrary files via the :config command. |
| CVE-2015-7702 | The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash). NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750. |
| CVE-2015-7701 | Memory leak in the CRYPTO_ASSOC function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (memory consumption). |
| CVE-2015-7692 | The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash). NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750. |
| CVE-2015-7691 | The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash) via crafted packets containing particular autokey operations. NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750. |
| CVE-2015-5219 | The ULOGTOD function in ntp.d in SNTP before 4.2.7p366 does not properly perform type conversions from a precision value to a double, which allows remote attackers to cause a denial of service (infinite loop) via a crafted NTP packet. |
| CVE-2015-5195 | ntp_openssl.m4 in ntpd in NTP before 4.2.7p112 allows remote attackers to cause a denial of service (segmentation fault) via a crafted statistics or filegen configuration command that is not enabled during compilation. |
| CVE-2015-5194 | The log_config_command function in ntp_parser.y in ntpd in NTP before 4.2.7p42 allows remote attackers to cause a denial of service (ntpd crash) via crafted logconfig commands. |
| CVE-2015-5146 | ntpd in ntp before 4.2.8p3 with remote configuration enabled allows remote authenticated users with knowledge of the configuration password and access to a computer entrusted to perform remote configuration to cause a denial of service (service crash) via a NULL byte in a crafted configuration directive packet. |
| CVE-2015-1799 | The symmetric-key feature in the receive function in ntp_proto.c in ntpd in NTP 3.x and 4.x before 4.2.8p2 performs state-variable updates upon receiving certain invalid packets, which makes it easier for man-in-the-middle attackers to cause a denial of service (synchronization loss) by spoofing the source IP address of a peer. |
| CVE-2015-1798 | The symmetric-key feature in the receive function in ntp_proto.c in ntpd in NTP 4.x before 4.2.8p2 requires a correct MAC only if the MAC field has a nonzero length, which makes it easier for man-in-the-middle attackers to spoof packets by omitting the MAC. |
| CVE-2014-9751 | The read_network_packet function in ntp_io.c in ntpd in NTP 4.x before 4.2.8p1 on Linux and OS X does not properly determine whether a source IP address is an IPv6 loopback address, which makes it easier for remote attackers to spoof restricted packets, and read or write to the runtime state, by leveraging the ability to reach the ntpd machine's network interface with a packet from the ::1 address. |
| CVE-2014-9750 | ntp_crypto.c in ntpd in NTP 4.x before 4.2.8p1, when Autokey Authentication is enabled, allows remote attackers to obtain sensitive information from process memory or cause a denial of service (daemon crash) via a packet containing an extension field with an invalid value for the length of its value field. |
| CVE-2014-9296 | The receive function in ntp_proto.c in ntpd in NTP before 4.2.8 continues to execute after detecting a certain authentication error, which might allow remote attackers to trigger an unintended association change via crafted packets. |
| CVE-2014-9295 | Multiple stack-based buffer overflows in ntpd in NTP before 4.2.8 allow remote attackers to execute arbitrary code via a crafted packet, related to (1) the crypto_recv function when the Autokey Authentication feature is used, (2) the ctl_putdata function, and (3) the configure function. |
| CVE-2014-9294 | util/ntp-keygen.c in ntp-keygen in NTP before 4.2.7p230 uses a weak RNG seed, which makes it easier for remote attackers to defeat cryptographic protection mechanisms via a brute-force attack. |
| CVE-2014-9293 | The config_auth function in ntpd in NTP before 4.2.7p11, when an auth key is not configured, improperly generates a key, which makes it easier for remote attackers to defeat cryptographic protection mechanisms via a brute-force attack. |
| CVE-2013-5211 | The monlist feature in ntp_request.c in ntpd in NTP before 4.2.7p26 allows remote attackers to cause a denial of service (traffic amplification) via forged (1) REQ_MON_GETLIST or (2) REQ_MON_GETLIST_1 requests, as exploited in the wild in December 2013. |
| CVE-2009-3563 | ntp_request.c in ntpd in NTP before 4.2.4p8, and 4.2.5, allows remote attackers to cause a denial of service (CPU and bandwidth consumption) by using MODE_PRIVATE to send a spoofed (1) request or (2) response packet that triggers a continuous exchange of MODE_PRIVATE error responses between two NTP daemons. |
| CVE-2009-1252 | Stack-based buffer overflow in the crypto_recv function in ntp_crypto.c in ntpd in NTP before 4.2.4p7 and 4.2.5 before 4.2.5p74, when OpenSSL and autokey are enabled, allows remote attackers to execute arbitrary code via a crafted packet containing an extension field. |
| CVE-2005-2496 | The xntpd ntp (ntpd) daemon before 4.2.0b, when run with the -u option and using a string to specify the group, uses the group ID of the user instead of the group, which causes xntpd to run with different privileges than intended. |
| CVE-2004-0657 | Integer overflow in the NTP daemon (NTPd) before 4.0 causes the NTP server to return the wrong date/time offset when a client requests a date/time that is more than 34 years away from the server's time. |
| CVE-2001-0414 | Buffer overflow in ntpd ntp daemon 4.0.99k and earlier (aka xntpd and xntp3) allows remote attackers to cause a denial of service and possibly execute arbitrary commands via a long readvar argument. |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
