Search Results

There are 352 CVE Records that match your search.
Name Description
CVE-2022-34749 In mistune through 2.0.2, support of inline markup is implemented by using regular expressions that can involve a high amount of backtracking on certain edge cases. This behavior is commonly named catastrophic backtracking.
CVE-2022-32230 Microsoft Windows SMBv3 suffers from a null pointer dereference in versions of Windows prior to the April, 2022 patch set. By sending a malformed FileNormalizedNameInformation SMBv3 request over a named pipe, an attacker can cause a Blue Screen of Death (BSOD) crash of the Windows kernel. For most systems, this attack requires authentication, except in the special case of Windows Domain Controllers, where unauthenticated users can always open named pipes as long as they can establish an SMB session. Typically, after the BSOD, the victim SMBv3 server will reboot.
CVE-2022-31139 UnsafeAccessor (UA) is a bridge to access jdk.internal.misc.Unsafe & sun.misc.Unsafe. Normally, if UA is loaded as a named module, the internal data of UA is protected by JVM and others can only access UA via UA's standard API. The main application can set up `SecurityCheck.AccessLimiter` for UA to limit access to UA. Starting with version 1.4.0 and prior to version 1.7.0, when `SecurityCheck.AccessLimiter` is set up, untrusted code can access UA without limitation, even when UA is loaded as a named module. This issue does not affect those for whom `SecurityCheck.AccessLimiter` is not set up. Version 1.7.0 contains a patch.
CVE-2022-30950 Jenkins WMI Windows Agents Plugin 1.8 and earlier includes the Windows Remote Command library which has a buffer overflow vulnerability that may allow users able to connect to a named pipe to execute commands on the Windows agent machine.
CVE-2022-30580 Code injection in Cmd.Start in os/exec before Go 1.17.11 and Go 1.18.3 allows execution of any binaries in the working directory named either "..com" or "..exe" by calling Cmd.Run, Cmd.Start, Cmd.Output, or Cmd.CombinedOutput when Cmd.Path is unset.
CVE-2022-26356 Racy interactions between dirty vram tracking and paging log dirty hypercalls Activation of log dirty mode done by XEN_DMOP_track_dirty_vram (was named HVMOP_track_dirty_vram before Xen 4.9) is racy with ongoing log dirty hypercalls. A suitably timed call to XEN_DMOP_track_dirty_vram can enable log dirty while another CPU is still in the process of tearing down the structures related to a previously enabled log dirty mode (XEN_DOMCTL_SHADOW_OP_OFF). This is due to lack of mutually exclusive locking between both operations and can lead to entries being added in already freed slots, resulting in a memory leak.
CVE-2022-24924 An improper access control in LiveWallpaperService prior to versions 3.0.9.0 allows to create a specific named system directory without a proper permission.
CVE-2022-24826 On Windows, if Git LFS operates on a malicious repository with a `..exe` file as well as a file named `git.exe`, and `git.exe` is not found in `PATH`, the `..exe` program will be executed, permitting the attacker to execute arbitrary code. This does not affect Unix systems. Similarly, if the malicious repository contains files named `..exe` and `cygpath.exe`, and `cygpath.exe` is not found in `PATH`, the `..exe` program will be executed when certain Git LFS commands are run. More generally, if the current working directory contains any file with a base name of `.` and a file extension from `PATHEXT` (except `.bat` and `.cmd`), and also contains another file with the same base name as a program Git LFS intends to execute (such as `git`, `cygpath`, or `uname`) and any file extension from `PATHEXT` (including `.bat` and `.cmd`), then, on Windows, when Git LFS attempts to execute the intended program the `..exe`, `..com`, etc., file will be executed instead, but only if the intended program is not found in any directory listed in `PATH`. The vulnerability occurs because when Git LFS detects that the program it intends to run does not exist in any directory listed in `PATH` then Git LFS passes an empty string as the executable file path to the Go `os/exec` package, which contains a bug such that, on Windows, it prepends the name of the current working directory (i.e., `.`) to the empty string without adding a path separator, and as a result searches in that directory for a file with the base name `.` combined with any file extension from `PATHEXT`, executing the first one it finds. (The reason `..bat` and `..cmd` files are not executed in the same manner is that, although the Go `os/exec` package tries to execute them just as it does a `..exe` file, the Microsoft Win32 API `CreateProcess()` family of functions have an undocumented feature in that they apparently recognize when a caller is attempting to execute a batch script file and instead run the `cmd.exe` command interpreter, passing the full set of command line arguments as parameters. These are unchanged from the command line arguments set by Git LFS, and as such, the intended program's name is the first, resulting in a command line like `cmd.exe /c git`, which then fails.) Git LFS has resolved this vulnerability by always reporting an error when a program is not found in any directory listed in `PATH` rather than passing an empty string to the Go `os/exec` package in this case. The bug in the Go `os/exec` package has been reported to the Go project and is expected to be patched after this security advisory is published. The problem was introduced in version 2.12.1 and is patched in version 3.1.3. Users of affected versions should upgrade to version 3.1.3. There are currently no known workarounds at this time.
CVE-2022-24286 Acer QuickAccess 2.01.300x before 2.01.3030 and 3.00.30xx before 3.00.3038 contains a local privilege escalation vulnerability. The user process communicates with a service of system authority through a named pipe. In this case, the Named Pipe is also given Read and Write rights to the general user. In addition, the service program does not verify the user when communicating. A thread may exist with a specific command. When the path of the program to be executed is sent, there is a local privilege escalation in which the service program executes the path with system privileges.
CVE-2022-24285 Acer Care Center 4.00.30xx before 4.00.3042 contains a local privilege escalation vulnerability. The user process communicates with a service of system authority called ACCsvc through a named pipe. In this case, the Named Pipe is also given Read and Write rights to the general user. In addition, the service program does not verify the user when communicating. A thread may exist with a specific command. When the path of the program to be executed is sent, there is a local privilege escalation in which the service program executes the path with system privileges.
CVE-2022-24141 The iTopVPNmini.exe component of iTop VPN 3.2 will try to connect to datastate_iTopVPN_Pipe_Server on a loop. An attacker that opened a named pipe with the same name can use it to gain the token of another user by listening for connections and abusing ImpersonateNamedPipeClient().
CVE-2022-24139 In IOBit Advanced System Care (AscService.exe) 15, an attacker with SEImpersonatePrivilege can create a named pipe with the same name as one of ASCService's named pipes. ASCService first tries to connect before trying to create the named pipes, because of that during login the service will try to connect to the attacker which will lead to either escalation of privileges (through token manipulation and ImpersonateNamedPipeClient() ) from ADMIN -> SYSTEM or from Local ADMIN-> Domain ADMIN depending on the user and named pipe that is used.
CVE-2022-23805 A security out-of-bounds read information disclosure vulnerability in Trend Micro Worry-Free Business Security Server could allow a local attacker to send garbage data to a specific named pipe and crash the server. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.
CVE-2022-23171 AtlasVPN - Privilege Escalation Lack of proper security controls on named pipe messages can allow an attacker with low privileges to send a malicious payload and gain SYSTEM permissions on a windows computer where the AtlasVPN client is installed.
CVE-2022-22715 Named Pipe File System Elevation of Privilege Vulnerability.
CVE-2022-22690 Within the Umbraco CMS, a configuration element named "UmbracoApplicationUrl" (or just "ApplicationUrl") is used whenever application code needs to build a URL pointing back to the site. For example, when a user resets their password and the application builds a password reset URL or when the administrator invites users to the site. For Umbraco versions less than 9.2.0, if the Application URL is not specifically configured, the attacker can manipulate this value and store it persistently affecting all users for components where the "UmbracoApplicationUrl" is used. For example, the attacker is able to change the URL users receive when resetting their password so that it points to the attackers server, when the user follows this link the reset token can be intercepted by the attacker resulting in account takeover.
CVE-2022-22148 'Root Service' service implemented in the following Yokogawa Electric products creates some named pipe with improper ACL configuration. CENTUM CS 3000 versions from R3.08.10 to R3.09.00, CENTUM VP versions from R4.01.00 to R4.03.00, from R5.01.00 to R5.04.20, and from R6.01.00 to R6.08.00, Exaopc versions from R3.72.00 to R3.79.00.
CVE-2022-22141 'Long-term Data Archive Package' service implemented in the following Yokogawa Electric products creates some named pipe with imporper ACL configuration. CENTUM CS 3000 versions from R3.08.10 to R3.09.00, CENTUM VP versions from R4.01.00 to R4.03.00, from R5.01.00 to R5.04.20, and from R6.01.00 to R6.08.00, Exaopc versions from R3.72.00 to R3.79.00.
CVE-2022-20653 A vulnerability in the DNS-based Authentication of Named Entities (DANE) email verification component of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling in DNS name resolution by the affected software. An attacker could exploit this vulnerability by sending specially formatted email messages that are processed by an affected device. A successful exploit could allow the attacker to cause the device to become unreachable from management interfaces or to process additional email messages for a period of time until the device recovers, resulting in a DoS condition. Continued attacks could cause the device to become completely unavailable, resulting in a persistent DoS condition.
CVE-2022-1662 In convert2rhel, there's an ansible playbook named ansible/run-convert2rhel.yml which passes the Red Hat Subscription Manager user password via the CLI to convert2rhel. This could allow unauthorized local users to view the password via the process list while convert2rhel is running. However, this ansible playbook is only an example in the upstream repository and it is not shipped in officially supported versions of convert2rhel.
CVE-2022-1183 On vulnerable configurations, the named daemon may, in some circumstances, terminate with an assertion failure. Vulnerable configurations are those that include a reference to http within the listen-on statements in their named.conf. TLS is used by both DNS over TLS (DoT) and DNS over HTTPS (DoH), but configurations using DoT alone are unaffected. Affects BIND 9.18.0 -> 9.18.2 and version 9.19.0 of the BIND 9.19 development branch.
CVE-2022-0635 Versions affected: BIND 9.18.0 When a vulnerable version of named receives a series of specific queries, the named process will eventually terminate due to a failed assertion check.
CVE-2021-45912 An unauthenticated Named Pipe channel in Controlup Real-Time Agent (cuAgent.exe) before 8.5 potentially allows an attacker to run OS commands via the ProcessActionRequest WCF method.
CVE-2021-44988 Jerryscript v3.0.0 and below was discovered to contain a stack overflow via ecma_find_named_property in ecma-helpers.c.
CVE-2021-44204 Local privilege escalation via named pipe due to improper access control checks. The following products are affected: Acronis Cyber Protect 15 (Windows) before build 28035, Acronis Agent (Windows) before build 27147, Acronis Cyber Protect Home Office (Windows) before build 39612, Acronis True Image 2021 (Windows) before build 39287
CVE-2021-41848 An issue was discovered in Luna Simo PPR1.180610.011/202001031830. It mishandles software updates such that local third-party apps can provide a spoofed software update file that contains an arbitrary shell script and arbitrary ARM binary, where both will be executed as the root user with an SELinux domain named osi. To exploit this vulnerability, a local third-party app needs to have write access to external storage to write the spoofed update at the expected path. The vulnerable system binary (i.e., /system/bin/osi_bin) does not perform any authentication of the update file beyond ensuring that it is encrypted with an AES key (that is hard-coded in the vulnerable system binary). Processes executing with the osi SELinux domain can programmatically perform the following actions: install apps, grant runtime permissions to apps (including permissions with protection levels of dangerous and development), access extensive Personally Identifiable Information (PII) using the programmatically grant permissions, uninstall apps, set the default launcher app to a malicious launcher app that spoofs other apps, set a network proxy to intercept network traffic, unload kernel modules, set the default keyboard to a keyboard that has keylogging functionality, examine notification contents, send text messages, and more. The spoofed update can optionally contain an arbitrary ARM binary that will be locally stored in internal storage and executed at system startup to achieve persistent code execution as the root user with the osi SELinux domain. This ARM binary will continue to execute at startup even if the app that provided the spoofed update is uninstalled.
CVE-2021-41131 python-tuf is a Python reference implementation of The Update Framework (TUF). In both clients (`tuf/client` and `tuf/ngclient`), there is a path traversal vulnerability that in the worst case can overwrite files ending in `.json` anywhere on the client system on a call to `get_one_valid_targetinfo()`. It occurs because the rolename is used to form the filename, and may contain path traversal characters (ie `../../name.json`). The impact is mitigated by a few facts: It only affects implementations that allow arbitrary rolename selection for delegated targets metadata, The attack requires the ability to A) insert new metadata for the path-traversing role and B) get the role delegated by an existing targets metadata, The written file content is heavily restricted since it needs to be a valid, signed targets file. The file extension is always .json. A fix is available in version 0.19 or newer. There are no workarounds that do not require code changes. Clients can restrict the allowed character set for rolenames, or they can store metadata in files named in a way that is not vulnerable: neither of these approaches is possible without modifying python-tuf.
CVE-2021-41065 An issue was discovered in Listary through 6. An attacker can create a \\.\pipe\Listary.listaryService named pipe and wait for a privileged user to open a session on the Listary installed host. Listary will automatically access the named pipe and the attacker will be able to duplicate the victim's token to impersonate him. This exploit is valid in certain Windows versions (Microsoft has patched the issue in later Windows 10 builds).
CVE-2021-41031 A relative path traversal vulnerability [CWE-23] in FortiClient for Windows versions 7.0.2 and prior, 6.4.6 and prior and 6.2.9 and below may allow a local unprivileged attacker to escalate their privileges to SYSTEM via the named pipe responsible for FortiESNAC service.
CVE-2021-40376 otris Update Manager 1.2.1.0 allows local users to achieve SYSTEM access via unauthenticated calls to exposed interfaces over a .NET named pipe. A remote attack may be possible as well, by leveraging WsHTTPBinding for HTTP traffic on TCP port 9000.
CVE-2021-3922 A race condition vulnerability was reported in IMController, a software component of Lenovo System Interface Foundation, prior to version 1.1.20.3 that could allow a local attacker to connect and interact with the IMController child process' named pipe.
CVE-2021-38346 The Brizy Page Builder plugin <= 2.3.11 for WordPress allowed authenticated users to upload executable files to a location of their choice using the brizy_create_block_screenshot AJAX action. The file would be named using the id parameter, which could be prepended with "../" to perform directory traversal, and the file contents were populated via the ibsf parameter, which would be base64-decoded and written to the file. While the plugin added a .jpg extension to all uploaded filenames, a double extension attack was still possible, e.g. a file named shell.php would be saved as shell.php.jpg, and would be executable on a number of common configurations.
CVE-2021-37701 The npm package "tar" (aka node-tar) before versions 4.4.16, 5.0.8, and 6.1.7 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be modified by a symbolic link is not extracted. This is, in part, achieved by ensuring that extracted directories are not symlinks. Additionally, in order to prevent unnecessary stat calls to determine whether a given path is a directory, paths are cached when directories are created. This logic was insufficient when extracting tar files that contained both a directory and a symlink with the same name as the directory, where the symlink and directory names in the archive entry used backslashes as a path separator on posix systems. The cache checking logic used both `\` and `/` characters as path separators, however `\` is a valid filename character on posix systems. By first creating a directory, and then replacing that directory with a symlink, it was thus possible to bypass node-tar symlink checks on directories, essentially allowing an untrusted tar file to symlink into an arbitrary location and subsequently extracting arbitrary files into that location, thus allowing arbitrary file creation and overwrite. Additionally, a similar confusion could arise on case-insensitive filesystems. If a tar archive contained a directory at `FOO`, followed by a symbolic link named `foo`, then on case-insensitive file systems, the creation of the symbolic link would remove the directory from the filesystem, but _not_ from the internal directory cache, as it would not be treated as a cache hit. A subsequent file entry within the `FOO` directory would then be placed in the target of the symbolic link, thinking that the directory had already been created. These issues were addressed in releases 4.4.16, 5.0.8 and 6.1.7. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. If this is not possible, a workaround is available in the referenced GHSA-9r2w-394v-53qc.
CVE-2021-36183 An improper authorization vulnerability [CWE-285] in FortiClient for Windows versions 7.0.1 and below and 6.4.2 and below may allow a local unprivileged attacker to escalate their privileges to SYSTEM via the named pipe responsible for Forticlient updates.
CVE-2021-35395 Realtek Jungle SDK version v2.x up to v3.4.14B provides an HTTP web server exposing a management interface that can be used to configure the access point. Two versions of this management interface exists: one based on Go-Ahead named webs and another based on Boa named boa. Both of them are affected by these vulnerabilities. Specifically, these binaries are vulnerable to the following issues: - stack buffer overflow in formRebootCheck due to unsafe copy of submit-url parameter - stack buffer overflow in formWsc due to unsafe copy of submit-url parameter - stack buffer overflow in formWlanMultipleAP due to unsafe copy of submit-url parameter - stack buffer overflow in formWlSiteSurvey due to unsafe copy of ifname parameter - stack buffer overflow in formStaticDHCP due to unsafe copy of hostname parameter - stack buffer overflow in formWsc due to unsafe copy of 'peerPin' parameter - arbitrary command execution in formSysCmd via the sysCmd parameter - arbitrary command injection in formWsc via the 'peerPin' parameter Exploitability of identified issues will differ based on what the end vendor/manufacturer did with the Realtek SDK webserver. Some vendors use it as-is, others add their own authentication implementation, some kept all the features from the server, some remove some of them, some inserted their own set of features. However, given that Realtek SDK implementation is full of insecure calls and that developers tends to re-use those examples in their custom code, any binary based on Realtek SDK webserver will probably contains its own set of issues on top of the Realtek ones (if kept). Successful exploitation of these issues allows remote attackers to gain arbitrary code execution on the device.
CVE-2021-35393 Realtek Jungle SDK version v2.x up to v3.4.14B provides a 'WiFi Simple Config' server that implements both UPnP and SSDP protocols. The binary is usually named wscd or mini_upnpd and is the successor to miniigd. The server is vulnerable to a stack buffer overflow vulnerability that is present due to unsafe parsing of the UPnP SUBSCRIBE/UNSUBSCRIBE Callback header. Successful exploitation of this vulnerability allows remote unauthenticated attackers to gain arbitrary code execution on the affected device.
CVE-2021-35392 Realtek Jungle SDK version v2.x up to v3.4.14B provides a 'WiFi Simple Config' server that implements both UPnP and SSDP protocols. The binary is usually named wscd or mini_upnpd and is the successor to miniigd. The server is vulnerable to a heap buffer overflow that is present due to unsafe crafting of SSDP NOTIFY messages from received M-SEARCH messages ST header.
CVE-2021-34998 This vulnerability allows local attackers to escalate privileges on affected installations of Panda Security Free Antivirus 20.2.0.0. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the use of named pipes. The issue results from allowing an untrusted process to impersonate the client of a pipe. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-14208.
CVE-2021-3450 The X509_V_FLAG_X509_STRICT flag enables additional security checks of the certificates present in a certificate chain. It is not set by default. Starting from OpenSSL version 1.1.1h a check to disallow certificates in the chain that have explicitly encoded elliptic curve parameters was added as an additional strict check. An error in the implementation of this check meant that the result of a previous check to confirm that certificates in the chain are valid CA certificates was overwritten. This effectively bypasses the check that non-CA certificates must not be able to issue other certificates. If a "purpose" has been configured then there is a subsequent opportunity for checks that the certificate is a valid CA. All of the named "purpose" values implemented in libcrypto perform this check. Therefore, where a purpose is set the certificate chain will still be rejected even when the strict flag has been used. A purpose is set by default in libssl client and server certificate verification routines, but it can be overridden or removed by an application. In order to be affected, an application must explicitly set the X509_V_FLAG_X509_STRICT verification flag and either not set a purpose for the certificate verification or, in the case of TLS client or server applications, override the default purpose. OpenSSL versions 1.1.1h and newer are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1k. OpenSSL 1.0.2 is not impacted by this issue. Fixed in OpenSSL 1.1.1k (Affected 1.1.1h-1.1.1j).
CVE-2021-32928 The Sentinel LDK Run-Time Environment installer (Versions 7.6 and prior) adds a firewall rule named &#8220;Sentinel License Manager&#8221; that allows incoming connections from private networks using TCP Port 1947. While uninstalling, the uninstaller fails to close Port 1947.
CVE-2021-32756 ManageIQ is an open-source management platform. In versions prior to jansa-4, kasparov-2, and lasker-1, there is a flaw in the MiqExpression module of ManageIQ where a low privilege user could enter a crafted Ruby string which would be evaluated. Successful exploitation will allow an attacker to execute arbitrary code with root privileges on the host system. There are patches for this issue in releases named jansa-4, kasparov-2, and lasker-1. If possible, restrict users, via RBAC, to only the part of the application that they need access to. While MiqExpression is widely used throughout the product, restricting users can limit the surface of the attack.
CVE-2021-29955 A transient execution vulnerability, named Floating Point Value Injection (FPVI) allowed an attacker to leak arbitrary memory addresses and may have also enabled JIT type confusion attacks. (A related vulnerability, Speculative Code Store Bypass (SCSB), did not affect Firefox.). This vulnerability affects Firefox ESR < 78.9 and Firefox < 87.
CVE-2021-27856 FatPipe WARP, IPVPN, and MPVPN software prior to versions 10.1.2r60p91 and 10.2.2r42 includes an account named "cmuser" that has administrative privileges and no password. Older versions of FatPipe software may also be vulnerable. The FatPipe advisory identifier for this vulnerability is FPSA002.
CVE-2021-25938 In ArangoDB, versions v2.2.6.2 through v3.7.10 are vulnerable to Cross-Site Scripting (XSS), since there is no validation of the .zip file name and filtering of potential abusive characters which zip files can be named to. There is no X-Frame-Options Header set, which makes it more susceptible for leveraging self XSS by attackers.
CVE-2021-25248 An out-of-bounds read information disclosure vulnerability in Trend Micro Apex One (on-prem and SaaS), OfficeScan XG SP1, and Worry-Free Business Security (10.0 SP1 and Services) could allow an attacker to disclose sensitive information about a named pipe. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.
CVE-2021-25218 In BIND 9.16.19, 9.17.16. Also, version 9.16.19-S1 of BIND Supported Preview Edition When a vulnerable version of named receives a query under the circumstances described above, the named process will terminate due to a failed assertion check. The vulnerability affects only BIND 9 releases 9.16.19, 9.17.16, and release 9.16.19-S1 of the BIND Supported Preview Edition.
CVE-2021-25216 In BIND 9.5.0 -> 9.11.29, 9.12.0 -> 9.16.13, and versions BIND 9.11.3-S1 -> 9.11.29-S1 and 9.16.8-S1 -> 9.16.13-S1 of BIND Supported Preview Edition, as well as release versions 9.17.0 -> 9.17.1 of the BIND 9.17 development branch, BIND servers are vulnerable if they are running an affected version and are configured to use GSS-TSIG features. In a configuration which uses BIND's default settings the vulnerable code path is not exposed, but a server can be rendered vulnerable by explicitly setting values for the tkey-gssapi-keytab or tkey-gssapi-credential configuration options. Although the default configuration is not vulnerable, GSS-TSIG is frequently used in networks where BIND is integrated with Samba, as well as in mixed-server environments that combine BIND servers with Active Directory domain controllers. For servers that meet these conditions, the ISC SPNEGO implementation is vulnerable to various attacks, depending on the CPU architecture for which BIND was built: For named binaries compiled for 64-bit platforms, this flaw can be used to trigger a buffer over-read, leading to a server crash. For named binaries compiled for 32-bit platforms, this flaw can be used to trigger a server crash due to a buffer overflow and possibly also to achieve remote code execution. We have determined that standard SPNEGO implementations are available in the MIT and Heimdal Kerberos libraries, which support a broad range of operating systems, rendering the ISC implementation unnecessary and obsolete. Therefore, to reduce the attack surface for BIND users, we will be removing the ISC SPNEGO implementation in the April releases of BIND 9.11 and 9.16 (it had already been dropped from BIND 9.17). We would not normally remove something from a stable ESV (Extended Support Version) of BIND, but since system libraries can replace the ISC SPNEGO implementation, we have made an exception in this case for reasons of stability and security.
CVE-2021-25215 In BIND 9.0.0 -> 9.11.29, 9.12.0 -> 9.16.13, and versions BIND 9.9.3-S1 -> 9.11.29-S1 and 9.16.8-S1 -> 9.16.13-S1 of BIND Supported Preview Edition, as well as release versions 9.17.0 -> 9.17.11 of the BIND 9.17 development branch, when a vulnerable version of named receives a query for a record triggering the flaw described above, the named process will terminate due to a failed assertion check. The vulnerability affects all currently maintained BIND 9 branches (9.11, 9.11-S, 9.16, 9.16-S, 9.17) as well as all other versions of BIND 9.
CVE-2021-25214 In BIND 9.8.5 -> 9.8.8, 9.9.3 -> 9.11.29, 9.12.0 -> 9.16.13, and versions BIND 9.9.3-S1 -> 9.11.29-S1 and 9.16.8-S1 -> 9.16.13-S1 of BIND 9 Supported Preview Edition, as well as release versions 9.17.0 -> 9.17.11 of the BIND 9.17 development branch, when a vulnerable version of named receives a malformed IXFR triggering the flaw described above, the named process will terminate due to a failed assertion the next time the transferred secondary zone is refreshed.
CVE-2021-24978 The OSMapper WordPress plugin through 2.1.5 contains an AJAX action to delete a plugin related post type named 'map' and is registered with the wp_ajax_nopriv prefix, making it available to unauthenticated users. There is no authorisation, CSRF and checks in place to ensure that the post to delete is a map one. As a result, unauthenticated user can delete arbitrary posts from the blog
CVE-2021-23632 All versions of package git are vulnerable to Remote Code Execution (RCE) due to missing sanitization in the Git.git method, which allows execution of OS commands rather than just git commands. Steps to Reproduce 1. Create a file named exploit.js with the following content: js var Git = require("git").Git; var repo = new Git("repo-test"); var user_input = "version; date"; repo.git(user_input, function(err, result) { console.log(result); }) 2. In the same directory as exploit.js, run npm install git. 3. Run exploit.js: node exploit.js. You should see the outputs of both the git version and date command-lines. Note that the repo-test Git repository does not need to be present to make this PoC work.
CVE-2021-23244 ColorOS pregrant dangerous permissions to apps which are listed in a whitelist xml named default-grant-permissions.But some apps in whitelist is not installed, attacker can disguise app with the same package name to obtain dangerous permission.
CVE-2021-20654 Wekan, open source kanban board system, between version 3.12 and 4.11, is vulnerable to multiple stored cross-site scripting. This is named 'Fieldbleed' in the vendor's site.
CVE-2020-9752 Naver Cloud Explorer before 2.2.2.11 allows the attacker can move a local file in any path on the filesystem as a system privilege through its named pipe.
CVE-2020-8884 rcdsvc in the Proofpoint Insider Threat Management Windows Agent (formerly ObserveIT Windows Agent) before 7.9 allows remote authenticated users to execute arbitrary code as SYSTEM because of improper deserialization over named pipes.
CVE-2020-8625 BIND servers are vulnerable if they are running an affected version and are configured to use GSS-TSIG features. In a configuration which uses BIND's default settings the vulnerable code path is not exposed, but a server can be rendered vulnerable by explicitly setting valid values for the tkey-gssapi-keytab or tkey-gssapi-credentialconfiguration options. Although the default configuration is not vulnerable, GSS-TSIG is frequently used in networks where BIND is integrated with Samba, as well as in mixed-server environments that combine BIND servers with Active Directory domain controllers. The most likely outcome of a successful exploitation of the vulnerability is a crash of the named process. However, remote code execution, while unproven, is theoretically possible. Affects: BIND 9.5.0 -> 9.11.27, 9.12.0 -> 9.16.11, and versions BIND 9.11.3-S1 -> 9.11.27-S1 and 9.16.8-S1 -> 9.16.11-S1 of BIND Supported Preview Edition. Also release versions 9.17.0 -> 9.17.1 of the BIND 9.17 development branch
CVE-2020-7331 Unquoted service executable path in McAfee Endpoint Security (ENS) prior to 10.7.0 November 2020 Update allows local users to cause a denial of service and malicious file execution via carefully crafted and named executable files.
CVE-2020-7252 Unquoted service executable path in DXL Broker in McAfee Data eXchange Layer (DXL) Framework 6.0.0 and earlier allows local users to cause a denial of service and malicious file execution via carefully crafted and named executable files.
CVE-2020-7135 A potential security vulnerability has been identified in the disk drive firmware installers named Supplemental Update / Online ROM Flash Component on HPE servers running Linux. The vulnerable software is included in the HPE Service Pack for ProLiant (SPP) releases 2018.06.0, 2018.09.0, and 2018.11.0. The vulnerable software is the Supplemental Update / Online ROM Flash Component for Linux (x64) software. The installer in this software component could be locally exploited to execute arbitrary code. Drive Models can be found in the Vulnerability Resolution field of the security bulletin. The 2019_03 SPP and Supplemental update / Online ROM Flash Component for Linux (x64) after 2019.03.0 has fixed this issue.
CVE-2020-7040 storeBackup.pl in storeBackup through 3.5 relies on the /tmp/storeBackup.lock pathname, which allows symlink attacks that possibly lead to privilege escalation. (Local users can also create a plain file named /tmp/storeBackup.lock to block use of storeBackup until an admin manually deletes that file.)
CVE-2020-6812 The first time AirPods are connected to an iPhone, they become named after the user's name by default (e.g. Jane Doe's AirPods.) Websites with camera or microphone permission are able to enumerate device names, disclosing the user's name. To resolve this issue, Firefox added a special case that renames devices containing the substring 'AirPods' to simply 'AirPods'. This vulnerability affects Thunderbird < 68.6, Firefox < 74, Firefox < ESR68.6, and Firefox ESR < 68.6.
CVE-2020-5794 A vulnerability in Nessus Network Monitor versions 5.11.0, 5.11.1, and 5.12.0 for Windows could allow an authenticated local attacker to execute arbitrary code by copying user-supplied files to a specially constructed path in a specifically named user directory. The attacker needs valid credentials on the Windows system to exploit this vulnerability.
CVE-2020-5793 A vulnerability in Nessus versions 8.9.0 through 8.12.0 for Windows & Nessus Agent 8.0.0 and 8.1.0 for Windows could allow an authenticated local attacker to copy user-supplied files to a specially constructed path in a specifically named user directory. An attacker could exploit this vulnerability by creating a malicious file and copying the file to a system directory. The attacker needs valid credentials on the Windows system to exploit this vulnerability.
CVE-2020-5728 OpenMRS 2.9 and prior copies "Referrer" header values into an html element named "redirectUrl" within many webpages (such as login.htm). There is insufficient validation for this parameter, which allows for the possibility of cross-site scripting.
CVE-2020-5425 Single Sign-On for Vmware Tanzu all versions prior to 1.11.3 ,1.12.x versions prior to 1.12.4 and 1.13.x prior to 1.13.1 are vulnerable to user impersonation attack.If two users are logged in to the SSO operator dashboard at the same time, with the same username, from two different identity providers, one can acquire the token of the other and thus operate with their permissions. Note: Foundation may be vulnerable only if: 1) The system zone is set up to use a SAML identity provider 2) There are internal users that have the same username as users in the external SAML provider 3) Those duplicate-named users have the scope to access the SSO operator dashboard 4) The vulnerability doesn't appear with LDAP because of chained authentication.
CVE-2020-5292 Leantime before versions 2.0.15 and 2.1-beta3 has a SQL Injection vulnerability. The impact is high. Malicious users/attackers can execute arbitrary SQL queries negatively affecting the confidentiality, integrity, and availability of the site. Attackers can exfiltrate data like the users' and administrators' password hashes, modify data, or drop tables. The unescaped parameter is "searchUsers" when sending a POST request to "/tickets/showKanban" with a valid session. In the code, the parameter is named "users" in class.tickets.php. This issue is fixed in versions 2.0.15 and 2.1.0 beta 3.
CVE-2020-28912 With MariaDB running on Windows, when local clients connect to the server over named pipes, it's possible for an unprivileged user with an ability to run code on the server machine to intercept the named pipe connection and act as a man-in-the-middle, gaining access to all the data passed between the client and the server, and getting the ability to run SQL commands on behalf of the connected user. This occurs because of an incorrect security descriptor. This affects MariaDB Server before 10.1.48, 10.2.x before 10.2.35, 10.3.x before 10.3.26, 10.4.x before 10.4.16, and 10.5.x before 10.5.7. NOTE: this issue exists because certain details of the MariaDB CVE-2019-2503 fix did not comprehensively address attack variants against MariaDB. This situation is specific to MariaDB, and thus CVE-2020-28912 does NOT apply to other vendors that were originally affected by CVE-2019-2503.
CVE-2020-28094 On Tenda AC1200 (Model AC6) 15.03.06.51_multi devices, the default settings for the router speed test contain links to download malware named elive or CNKI E-Learning.
CVE-2020-25620 An issue was discovered in SolarWinds N-Central 12.3.0.670. Hard-coded Credentials exist by default for local user accounts named support@n-able.com and nableadmin@n-able.com. These allow logins to the N-Central Administrative Console (NAC) and/or the regular web interface.
CVE-2020-25507 An incorrect permission assignment during the installation script of TeamworkCloud 18.0 thru 19.0 allows a local unprivileged attacker to execute arbitrary code as root. During installation, the user is instructed to set the system enviroment file with world writable permissions (0777 /etc/environment). Any local unprivileged user can execute arbitrary code simply by writing to /etc/environment, which will force all users, including root, to execute arbitrary code during the next login or reboot. In addition, the entire home directory of the twcloud user at /home/twcloud is recursively given world writable permissions. This allows any local unprivileged attacker to execute arbitrary code, as twcloud. This product was previous named Cameo Enterprise Data Warehouse (CEDW).
CVE-2020-15504 A SQL injection vulnerability in the user and admin web interfaces of Sophos XG Firewall v18.0 MR1 and older potentially allows an attacker to run arbitrary code remotely. The fix is built into the re-release of XG Firewall v18 MR-1 (named MR-1-Build396) and the v17.5 MR13 release. All other versions >= 17.0 have received a hotfix.
CVE-2020-15169 In Action View before versions 5.2.4.4 and 6.0.3.3 there is a potential Cross-Site Scripting (XSS) vulnerability in Action View's translation helpers. Views that allow the user to control the default (not found) value of the `t` and `translate` helpers could be susceptible to XSS attacks. When an HTML-unsafe string is passed as the default for a missing translation key named html or ending in _html, the default string is incorrectly marked as HTML-safe and not escaped. This is patched in versions 6.0.3.3 and 5.2.4.4. A workaround without upgrading is proposed in the source advisory.
CVE-2020-13770 Several services are accessing named pipes in Ivanti Endpoint Manager through 2020.1.1 with default or overly permissive security attributes; as these services run as user &#8216;NT AUTHORITY\SYSTEM&#8217;, the issue can be used to escalate privileges from a local standard or service account having SeImpersonatePrivilege (eg. user &#8216;NT AUTHORITY\NETWORK SERVICE&#8217;).
CVE-2020-13664 Arbitrary PHP code execution vulnerability in Drupal Core under certain circumstances. An attacker could trick an administrator into visiting a malicious site that could result in creating a carefully named directory on the file system. With this directory in place, an attacker could attempt to brute force a remote code execution vulnerability. Windows servers are most likely to be affected. This issue affects: Drupal Drupal Core 8.8.x versions prior to 8.8.8; 8.9.x versions prior to 8.9.1; 9.0.1 versions prior to 9.0.1.
CVE-2020-13173 Initialization of the pcoip_credential_provider in Teradici PCoIP Standard Agent for Windows and PCoIP Graphics Agent for Windows versions 19.11.1 and earlier creates an insecure named pipe, which allows an attacker to intercept sensitive information or possibly elevate privileges via pre-installing an application which acquires that named pipe.
CVE-2020-12852 The update feature for Pydio Cells 2.0.4 allows an administrator user to set a custom update URL and the public RSA key used to validate the downloaded update package. The update process involves downloading the updated binary file from a URL indicated in the update server response, validating its checksum and signature with the provided public key and finally replacing the current application binary. To complete the update process, the application&#8217;s service or appliance needs to be restarted. An attacker with administrator access can leverage the software update feature to force the application to download a custom binary that will replace current Pydio Cells binary. When the server or service is eventually restarted the attacker will be able to execute code under the privileges of the user running the application. In the Pydio Cells enterprise appliance this is with the privileges of the user named &#8220;pydio&#8221;.
CVE-2020-12847 Pydio Cells 2.0.4 web application offers an administrative console named &#8220;Cells Console&#8221; that is available to users with an administrator role. This console provides an administrator user with the possibility of changing several settings, including the application&#8217;s mailer configuration. It is possible to configure a few engines to be used by the mailer application to send emails. If the user selects the &#8220;sendmail&#8221; option as the default one, the web application offers to edit the full path where the sendmail binary is hosted. Since there is no restriction in place while editing this value, an attacker authenticated as an administrator user could force the web application into executing any arbitrary binary.
CVE-2020-12431 A Windows privilege change issue was discovered in Splashtop Software Updater before 1.5.6.16. Insecure permissions on the configuration file and named pipe allow for local privilege escalation to NT AUTHORITY/SYSTEM, by forcing a permission change to any Splashtop files and directories, with resultant DLL hijacking. This product is bundled with Splashtop Streamer (before 3.3.8.0) and Splashtop Business (before 3.3.8.0).
CVE-2020-11492 An issue was discovered in Docker Desktop through 2.2.0.5 on Windows. If a local attacker sets up their own named pipe prior to starting Docker with the same name, this attacker can intercept a connection attempt from Docker Service (which runs as SYSTEM), and then impersonate their privileges.
CVE-2019-9745 CloudCTI HIP Integrator Recognition Configuration Tool allows privilege escalation via its EXQUISE integration. This tool communicates with a service (Recognition Update Client Service) via an insecure communication channel (Named Pipe). The data (JSON) sent via this channel is used to import data from CRM software using plugins (.dll files). The plugin to import data from the EXQUISE software (DatasourceExquiseExporter.dll) can be persuaded to start arbitrary programs (including batch files) that are executed using the same privileges as Recognition Update Client Service (NT AUTHORITY\SYSTEM), thus elevating privileges. This occurs because a higher-privileged process executes scripts from a directory writable by a lower-privileged user.
CVE-2019-9508 The web interface of the Vertiv Avocent UMG-4000 version 4.2.1.19 is vulnerable to stored XSS. A remote attacker authenticated with an administrator account could store a maliciously named file within the web application that would execute each time a user browsed to the page.
CVE-2019-7331 Self - Stored Cross Site Scripting (XSS) exists in ZoneMinder through 1.32.3 while editing an existing monitor field named "signal check color" (monitor.php). There exists no input validation or output filtration, leaving it vulnerable to HTML Injection and an XSS attack.
CVE-2019-7297 An issue was discovered on D-Link DIR-823G devices with firmware through 1.02B03. A command Injection vulnerability allows attackers to execute arbitrary OS commands via shell metacharacters in a crafted /HNAP1 request. This occurs when the GetNetworkTomographyResult function calls the system function with an untrusted input parameter named Address. Consequently, an attacker can execute any command remotely when they control this input.
CVE-2019-6476 A defect in code added to support QNAME minimization can cause named to exit with an assertion failure if a forwarder returns a referral rather than resolving the query. This affects BIND versions 9.14.0 up to 9.14.6, and 9.15.0 up to 9.15.4.
CVE-2019-3742 Dell/Alienware Digital Delivery versions prior to 3.5.2013 contain a privilege escalation vulnerability. A local non-privileged malicious user could exploit a named pipe that performs binary deserialization via a process hollowing technique to inject malicous code to run an executable with elevated privileges.
CVE-2019-20041 wp_kses_bad_protocol in wp-includes/kses.php in WordPress before 5.3.1 mishandles the HTML5 colon named entity, allowing attackers to bypass input sanitization, as demonstrated by the javascript&colon; substring.
CVE-2019-19741 Electronic Arts Origin 10.5.55.33574 is vulnerable to local privilege escalation due to arbitrary directory DACL manipulation, a different issue than CVE-2019-19247 and CVE-2019-19248. When Origin.exe connects to the named pipe OriginClientService, the privileged service verifies the client's executable file instead of its in-memory process (which can be significantly different from the executable file due to, for example, DLL injection). Data transmitted over the pipe is encrypted using a static key. Instead of hooking the pipe communication directly via WriteFileEx(), this can be bypassed by hooking the EVP_EncryptUpdate() function of libeay32.dll. The pipe takes the command CreateDirectory to create a directory and adjust the directory DACL. Calls to this function can be intercepted, the directory and the DACL can be replaced, and the manipulated DACL is written. Arbitrary DACL write is further achieved by creating a hardlink in a user-controlled directory that points to (for example) a service binary. The DACL is then written to this service binary, which results in escalation of privileges.
CVE-2019-19470 Unsafe usage of .NET deserialization in Named Pipe message processing allows privilege escalation to NT AUTHORITY\SYSTEM for a local attacker. Affected product is TinyWall, all versions up to and including 2.1.12. Fixed in version 2.1.13.
CVE-2019-18297 A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with local access to the MS3000 Server and low privileges could gain root privileges by sending specifically crafted packets to a named pipe. Please note that an attacker needs to have local access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.
CVE-2019-18215 An issue was discovered in signmgr.dll 6.5.0.819 in Comodo Internet Security through 12.0. A DLL Preloading vulnerability allows an attacker to implant an unsigned DLL named iLog.dll in a partially unprotected product directory. This DLL is then loaded into a high-privileged service before the binary signature validation logic is loaded, and might bypass some of the self-defense mechanisms.
CVE-2019-17201 FastTrack Admin By Request 6.1.0.0 supports group policies that are supposed to allow only a select range of users to elevate to Administrator privilege at will. When a user requests elevation using the AdminByRequest.exe interface, the interface communicates with the underlying service (Audckq32.exe) using a .NET named pipe. If the underlying service responds that a user is permitted access to the elevation feature, the client then reinitiates communication with the underlying service and requests elevation. This elevation request has no local checks in the service, and depends on client-side validation in the AdminByRequest.exe interface, i.e., it is a vulnerable exposed functionality in the service. By communicating directly with the underlying service, any user can request elevation and obtain Administrator privilege regardless of group policies or permissions.
CVE-2019-17190 A Local Privilege Escalation issue was discovered in Avast Secure Browser 76.0.1659.101. The vulnerability is due to an insecure ACL set by the AvastBrowserUpdate.exe (which is running as NT AUTHORITY\SYSTEM) when AvastSecureBrowser.exe checks for new updates. When the update check is triggered, the elevated process cleans the ACL of the Update.ini file in %PROGRAMDATA%\Avast Software\Browser\Update\ and sets all privileges to group Everyone. Because any low-privileged user can create, delete, or modify the Update.ini file stored in this location, an attacker with low privileges can create a hard link named Update.ini in this folder, and make it point to a file writable by NT AUTHORITY\SYSTEM. Once AvastBrowserUpdate.exe is triggered by the update check functionality, the DACL is set to a misconfigured value on the crafted Update.ini and, consequently, to the target file that was previously not writable by the low-privileged attacker.
CVE-2019-16398 On Keeper K5 20.1.0.25 and 20.1.0.63 devices, remote code execution can occur by inserting an SD card containing a file named zskj_script_run.sh that executes a reverse shell.
CVE-2019-16242 On TCL Alcatel Cingular Flip 2 B9HUAH1 devices, there is an engineering application named omamock that is vulnerable to OS command injection. An attacker with physical access to the device can abuse this vulnerability to execute arbitrary OS commands as the root user via the application's UI.
CVE-2019-1547 Normally in OpenSSL EC groups always have a co-factor present and this is used in side channel resistant code paths. However, in some cases, it is possible to construct a group using explicit parameters (instead of using a named curve). In those cases it is possible that such a group does not have the cofactor present. This can occur even where all the parameters match a known named curve. If such a curve is used then OpenSSL falls back to non-side channel resistant code paths which may result in full key recovery during an ECDSA signature operation. In order to be vulnerable an attacker would have to have the ability to time the creation of a large number of signatures where explicit parameters with no co-factor present are in use by an application using libcrypto. For the avoidance of doubt libssl is not vulnerable because explicit parameters are never used. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s).
CVE-2019-15389 The Haier A6 Android device with a build fingerprint of Haier/A6/A6:8.1.0/O11019/1534219877:userdebug/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.1.13). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands to be executed as the system user. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. In addition to the local attack surface, its accompanying app with a package name of com.ekesoo.lovelyhifonts makes network requests using HTTP and an attacker can perform a Man-in-the-Middle (MITM) attack on the connection to inject a command in a network response that will be executed as the system user by the com.lovelyfont.defcontainer app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.
CVE-2019-15388 The Coolpad 1851 Android device with a build fingerprint of Coolpad/android/android:8.1.0/O11019/1534834761:userdebug/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.1.13). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands to be executed as the system user. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. In addition to the local attack surface, its accompanying app with a package name of com.ekesoo.lovelyhifonts makes network requests using HTTP and an attacker can perform a Man-in-the-Middle (MITM) attack on the connection to inject a command in a network response that will be executed as the system user by the com.lovelyfont.defcontainer app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.
CVE-2019-15351 The Tecno Camon Android device with a build fingerprint of TECNO/H622/TECNO-ID5b:8.1.0/O11019/G-180829V31:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.
CVE-2019-15350 The Tecno Camon Android device with a build fingerprint of TECNO/H622/TECNO-ID5b:8.1.0/O11019/G-180829V31:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.service.FunctionService that allows any app co-located on the device to supply the file path to a Dalvik Executable (DEX) file which it will dynamically load within its own process and execute in with its own system privileges. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing code as the system user can allow a third-party app to factory reset the device, obtain the user's Wi-Fi passwords, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.
CVE-2019-15349 The Tecno Camon Android device with a build fingerprint of TECNO/H612/TECNO-ID5a:8.1.0/O11019/F-180828V106:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.service.FunctionService that allows any app co-located on the device to supply the file path to a Dalvik Executable (DEX) file which it will dynamically load within its own process and execute in with its own system privileges. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing code as the system user can allow a third-party app to factory reset the device, obtain the user's Wi-Fi passwords, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.
CVE-2019-15348 The Tecno Camon Android device with a build fingerprint of TECNO/H612/TECNO-ID5a:8.1.0/O11019/F-180828V106:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.
CVE-2019-15347 The Tecno Camon iClick 2 Android device with a build fingerprint of TECNO/H622/TECNO-ID6:8.1.0/O11019/F-180824V116:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.
CVE-2019-15346 The Tecno Camon iClick 2 Android device with a build fingerprint of TECNO/H622/TECNO-ID6:8.1.0/O11019/F-180824V116:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.service.FunctionService that allows any app co-located on the device to supply the file path to a Dalvik Executable (DEX) file which it will dynamically load within its own process and execute in with its own system privileges. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing code as the system user can allow a third-party app to factory reset the device, obtain the user's Wi-Fi passwords, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.
CVE-2019-15345 The Tecno Camon iClick Android device with a build fingerprint of TECNO/H633/TECNO-IN6:8.1.0/O11019/A-180409V96:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.8). This app contains an exported service named com.lovelyfont.manager.service.FunctionService that allows any app co-located on the device to supply the file path to a Dalvik Executable (DEX) file which it will dynamically load within its own process and execute in with its own system privileges. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing code as the system user can allow a third-party app to factory reset the device, obtain the user's Wi-Fi passwords, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.
CVE-2019-15344 The Tecno Camon iClick Android device with a build fingerprint of TECNO/H633/TECNO-IN6:8.1.0/O11019/A-180409V96:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.8). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands to be executed as the system user. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. In addition to the local attack surface, its accompanying app with a package name of com.ekesoo.lovelyhifonts makes network requests using HTTP and an attacker can perform a Man-in-the-Middle (MITM) attack on the connection to inject a command in a network response that will be executed as the system user by the com.lovelyfont.defcontainer app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.
CVE-2019-15343 The Tecno Camon iClick Android device with a build fingerprint of TECNO/H633/TECNO-IN6:8.1.0/O11019/A-180409V96:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.8). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.
CVE-2019-15342 The Tecno Camon iAir 2 Plus Android device with a build fingerprint of TECNO/H622/TECNO-ID3k:8.1.0/O11019/E-180914V83:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.
CVE-2019-15341 The Tecno Camon iAir 2 Plus Android device with a build fingerprint of TECNO/H622/TECNO-ID3k:8.1.0/O11019/E-180914V83:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.service.FunctionService that allows any app co-located on the device to supply the file path to a Dalvik Executable (DEX) file which it will dynamically load within its own process and execute in with its own system privileges. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing code as the system user can allow a third-party app to factory reset the device, obtain the user's Wi-Fi passwords, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.
CVE-2019-14861 All Samba versions 4.x.x before 4.9.17, 4.10.x before 4.10.11 and 4.11.x before 4.11.3 have an issue, where the (poorly named) dnsserver RPC pipe provides administrative facilities to modify DNS records and zones. Samba, when acting as an AD DC, stores DNS records in LDAP. In AD, the default permissions on the DNS partition allow creation of new records by authenticated users. This is used for example to allow machines to self-register in DNS. If a DNS record was created that case-insensitively matched the name of the zone, the ldb_qsort() and dns_name_compare() routines could be confused into reading memory prior to the list of DNS entries when responding to DnssrvEnumRecords() or DnssrvEnumRecords2() and so following invalid memory as a pointer.
CVE-2019-12184 There is XSS in browser/components/MarkdownPreview.js in BoostIO Boostnote 0.11.15 via a label named flowchart, sequence, gallery, or chart, as demonstrated by a crafted SRC attribute of an IFRAME element, a different vulnerability than CVE-2019-12136.
CVE-2019-12136 There is XSS in BoostIO Boostnote 0.11.15 via a label named mermaid, as demonstrated by a crafted SRC attribute of an IFRAME element.
CVE-2019-11496 In versions of Couchbase Server prior to 5.0, the bucket named "default" was a special bucket that allowed read and write access without authentication. As part of 5.0, the behavior of all buckets including "default" were changed to only allow access by authenticated users with sufficient authorization. However, users were allowed unauthenticated and unauthorized access to the "default" bucket if the properties of this bucket were edited. This has been fixed in versions 5.1.0 and 5.5.0.
CVE-2019-11201 Dolibarr ERP/CRM 9.0.1 provides a module named website that provides for creation of public websites with a WYSIWYG editor. It was identified that the editor also allowed inclusion of dynamic code, which can lead to code execution on the host machine. An attacker has to check a setting on the same page, which specifies the inclusion of dynamic content. Thus, a lower privileged user of the application can execute code under the context and permissions of the underlying web server.
CVE-2019-1010220 tcpdump.org tcpdump 4.9.2 is affected by: CWE-126: Buffer Over-read. The impact is: May expose Saved Frame Pointer, Return Address etc. on stack. The component is: line 234: "ND_PRINT((ndo, "%s", buf));", in function named "print_prefix", in "print-hncp.c". The attack vector is: The victim must open a specially crafted pcap file.
CVE-2019-0036 When configuring a stateless firewall filter in Junos OS, terms named using the format "internal-n" (e.g. "internal-1", "internal-2", etc.) are silently ignored. No warning is issued during configuration, and the config is committed without error, but the filter criteria will match all packets leading to unexpected results. Affected releases are Juniper Networks Junos OS: All versions prior to and including 12.3; 14.1X53 versions prior to 14.1X53-D130, 14.1X53-D49; 15.1 versions prior to 15.1F6-S12, 15.1R7-S4; 15.1X49 versions prior to 15.1X49-D161, 15.1X49-D170; 15.1X53 versions prior to 15.1X53-D236, 15.1X53-D496, 15.1X53-D69; 16.1 versions prior to 16.1R7-S4, 16.1R7-S5; 16.2 versions prior to 16.2R2-S9; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R1-S8, 17.2R3-S1; 17.3 versions prior to 17.3R3-S4; 17.4 versions prior to 17.4R1-S7, 17.4R2-S3; 18.1 versions prior to 18.1R2-S4, 18.1R3-S4; 18.2 versions prior to 18.2R1-S5, 18.2R2-S1; 18.2X75 versions prior to 18.2X75-D40; 18.3 versions prior to 18.3R1-S3; 18.4 versions prior to 18.4R1-S1, 18.4R1-S2.
CVE-2018-9191 A local privilege escalation in Fortinet FortiClient for Windows 6.0.4 and earlier allows attackers to execute unauthorized code or commands via the named pipe responsible for Forticlient updates.
CVE-2018-6597 The Alcatel A30 device with a build fingerprint of TCL/5046G/MICKEY6US:7.0/NRD90M/J63:user/release-keys contains a hidden privilege escalation capability to achieve command execution as the root user. They have made modifications that allow a user with physical access to the device to obtain a root shell via ADB. Modifying the read-only properties by an app as the system user creates a UNIX domain socket named factory_test that will execute commands as the root user by processes that have privilege to access it (as per the SELinux rules that the vendor controls).
CVE-2018-6400 Kingsoft WPS Office Free 10.2.0.5978 allows local users to gain privileges or cause a denial of service by impersonating all the pipes through a use of \\.\pipe\WPSCloudSvr\WpsCloudSvr -- an "insecurely created named pipe." Ensures full access to Everyone users group.
CVE-2018-6322 Panda Global Protection 17.0.1 allows local users to gain privileges or cause a denial of service by impersonating all the pipes through a use of \.\pipe\PSANMSrvcPpal -- an "insecurely created named pipe." Ensures full access to Everyone users group.
CVE-2018-6183 BitDefender Total Security 2018 allows local users to gain privileges or cause a denial of service by impersonating all the pipes through a use of an "insecurely created named pipe". Ensures full access to Everyone users group.
CVE-2018-5737 A problem with the implementation of the new serve-stale feature in BIND 9.12 can lead to an assertion failure in rbtdb.c, even when stale-answer-enable is off. Additionally, problematic interaction between the serve-stale feature and NSEC aggressive negative caching can in some cases cause undesirable behavior from named, such as a recursion loop or excessive logging. Deliberate exploitation of this condition could cause operational problems depending on the particular manifestation -- either degradation or denial of service. Affects BIND 9.12.0 and 9.12.1.
CVE-2018-5736 An error in zone database reference counting can lead to an assertion failure if a server which is running an affected version of BIND attempts several transfers of a slave zone in quick succession. This defect could be deliberately exercised by an attacker who is permitted to cause a vulnerable server to initiate zone transfers (for example: by sending valid NOTIFY messages), causing the named process to exit after failing the assertion test. Affects BIND 9.12.0 and 9.12.1.
CVE-2018-3955 An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.
CVE-2018-3954 Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAMData entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.
CVE-2018-18930 The Tightrope Media Carousel digital signage product 7.0.4.104 contains an arbitrary file upload vulnerability in the Manage Bulletins/Upload feature, which can be leveraged to gain remote code execution. An authenticated attacker can upload a crafted ZIP file (based on an exported backup of existing "Bulletins") containing a malicious file. When uploaded, the system only checks for the presence of the needed files within the ZIP and, as long as the malicious file is named properly, will extract all contained files to a new directory on the system, named with a random GUID. The attacker can determine this GUID by previewing an image from the uploaded Bulletin within the web UI. Once the GUID is determined, the attacker can navigate to the malicious file and execute it. In testing, an ASPX web shell was uploaded, allowing for remote-code execution in the context of a restricted IIS user.
CVE-2018-18608 DedeCMS 5.7 SP2 allows XSS via the function named GetPageList defined in the include/datalistcp.class.php file that is used to display the page numbers list at the bottom of some templates, as demonstrated by the PATH_INFO to /member/index.php, /member/pm.php, /member/content_list.php, or /plus/feedback.php.
CVE-2018-18255 An issue was discovered in CapMon Access Manager 5.4.1.1005. The client applications of AccessManagerCoreService.exe communicate with this server through named pipes. A user can initiate communication with the server by creating a named pipe and sending commands to achieve elevated privileges.
CVE-2018-16873 In Go before 1.10.6 and 1.11.x before 1.11.3, the "go get" command is vulnerable to remote code execution when executed with the -u flag and the import path of a malicious Go package, or a package that imports it directly or indirectly. Specifically, it is only vulnerable in GOPATH mode, but not in module mode (the distinction is documented at https://golang.org/cmd/go/#hdr-Module_aware_go_get). Using custom domains, it's possible to arrange things so that a Git repository is cloned to a folder named ".git" by using a vanity import path that ends with "/.git". If the Git repository root contains a "HEAD" file, a "config" file, an "objects" directory, a "refs" directory, with some work to ensure the proper ordering of operations, "go get -u" can be tricked into considering the parent directory as a repository root, and running Git commands on it. That will use the "config" file in the original Git repository root for its configuration, and if that config file contains malicious commands, they will execute on the system running "go get -u".
CVE-2018-16156 In PaperStream IP (TWAIN) 1.42.0.5685 (Service Update 7), the FJTWSVIC service running with SYSTEM privilege processes unauthenticated messages received over the FjtwMkic_Fjicube_32 named pipe. One of these message processing functions attempts to dynamically load the UninOldIS.dll library and executes an exported function named ChangeUninstallString. The default install does not contain this library and therefore if any DLL with that name exists in any directory listed in the PATH variable, it can be used to escalate to SYSTEM level privilege.
CVE-2018-15592 An issue was discovered in Ivanti Workspace Control before 10.3.10.0 and RES One Workspace. A local authenticated user can execute processes with elevated privileges via an unspecified attack vector.
CVE-2018-15514 HandleRequestAsync in Docker for Windows before 18.06.0-ce-rc3-win68 (edge) and before 18.06.0-ce-win72 (stable) deserialized requests over the \\.\pipe\dockerBackend named pipe without verifying the validity of the deserialized .NET objects. This would allow a malicious user in the "docker-users" group (who may not otherwise have administrator access) to escalate to administrator privileges.
CVE-2018-15364 A Named Pipe Request Processing Out-of-Bounds Read Information Disclosure vulnerability in Trend Micro OfficeScan XG (12.0) could allow a local attacker to disclose sensitive information on vulnerable installations. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit the vulnerability.
CVE-2018-15007 The Sky Elite 6.0L+ Android device with a build fingerprint of SKY/x6069_trx_l601_sky/x6069_trx_l601_sky:6.0/MRA58K/1482897127:user/release-keys contains a pre-installed platform app with a package name of com.fw.upgrade.sysoper (versionCode=238, versionName=2.3.8) that contains an exported broadcast receiver app component named com.adups.fota.sysoper.WriteCommandReceiver that allows any app co-located on the device to supply arbitrary commands to be executed as the system user. The com.fw.upgrade.sysoper app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, obtain the user's text messages, and more.
CVE-2018-15006 The ZTE ZMAX Champ Android device with a build fingerprint of ZTE/Z917VL/fortune:6.0.1/MMB29M/20170327.120922:user/release-keys contains a pre-installed platform app with a package name of com.android.zte.hiddenmenu (versionCode=23, versionName=6.0.1) that contains an exported broadcast receiver app component named com.android.zte.hiddenmenu.CommandReceiver that is accessible to any app co-located on the device. This app component, when it receives a broadcast intent with a certain action string, will write a non-standard (i.e., not defined in Android Open Source Project (AOSP) code) command to the /cache/recovery/command file to be executed in recovery mode. Once the device boots into recovery mode, it will crash, boot into recovery mode, and crash again. This crash loop will keep repeating, which makes the device unusable. There is no way to boot into an alternate mode once the crash loop starts.
CVE-2018-15005 The ZTE ZMAX Champ Android device with a build fingerprint of ZTE/Z917VL/fortune:6.0.1/MMB29M/20170327.120922:user/release-keys contains a pre-installed platform app with a package name of com.zte.zdm.sdm (versionCode=31, versionName=V5.0.3) that contains an exported broadcast receiver app component named com.zte.zdm.VdmcBroadcastReceiver that allows any app co-located on the device to programmatically initiate a factory reset. In addition, the app initiating the factory reset does not require any permissions. A factory reset will remove all user data and apps from the device. This will result in the loss of any data that have not been backed up or synced externally. The capability to perform a factory reset is not directly available to third-party apps (those that the user installs themselves with the exception of enabled Mobile Device Management (MDM) apps), although this capability can be obtained by leveraging an unprotected app component of a pre-installed platform app.
CVE-2018-15004 The Coolpad Canvas device with a build fingerprint of Coolpad/cp3636a/cp3636a:7.0/NRD90M/093031423:user/release-keys contains a platform app with a package name of com.qualcomm.qti.modemtestmode (versionCode=24, versionName=7.0) that contains an exported service app component named com.qualcomm.qti.modemtestmode.MbnTestService that allows any app on the device to set certain system properties as the com.android.phone user. When an app sets the persist.service.logr.enable system property to a value of 1, an app with a package name of com.yulong.logredirect (versionCode=20160622, versionName=5.25_20160622_01) will start writing the system-wide logcat log, kernel log, and a tcpdump network traffic capture to external storage. Furthermore, on the Coolpad Canvas device, the com.android.phone app writes the destination phone number and body of the text message for outgoing text messages. A notification when logging can be avoided if the log is enabled after device startup and disabled prior to device shutdown by setting the system properties using the exported interface of the com.qualcomm.qti.modemtestmode app. Any app with the READ_EXTERNAL_STORAGE permission can access the log files.
CVE-2018-15003 The Coolpad Defiant (Coolpad/cp3632a/cp3632a:7.1.1/NMF26F/099480857:user/release-keys) and the T-Mobile Revvl Plus (Coolpad/alchemy/alchemy:7.1.1/143.14.171129.3701A-TMO/buildf_nj_02-206:user/release-keys) Android devices contain a pre-installed platform app with a package name of com.qualcomm.qti.telephony.extcarrierpack (versionCode=25, versionName=7.1.1) containing an exported broadcast receiver app component named com.qualcomm.qti.telephony.extcarrierpack.UiccReceiver that allows any app co-located on the device to programmatically perform a factory reset. In addition, the app initiating the factory reset does not require any permissions. A factory reset will remove all user data and apps from the device. This will result in the loss of any data that have not been backed up or synced externally. The capability to perform a factory reset is not directly available to third-party apps (those that the user installs themselves with the exception of enabled Mobile Device Management (MDM) apps), although this capability can be obtained by leveraging an unprotected app component of a pre-installed platform app.
CVE-2018-15002 The Vivo V7 device with a build fingerprint of vivo/1718/1718:7.1.2/N2G47H/compil11021857:user/release-keys allows any app co-located on the device to set system properties as the com.android.phone user. The com.qualcomm.qti.modemtestmode app (versionCode=25, versionName=7.1.2) that contains an exported service named com.qualcomm.qti.modemtestmode.MbnTestService that allows any app co-located on the device to provide key-value pairs to set certain system properties. Notably, system properties with the persist.* prefix can be set which will survive a reboot. On the Vivo V7 device, when the persist.sys.input.log property is set to have a value of yes, the user's screen touches be written to the logcat log by the InputDispatcher for all apps. The system-wide logcat log can be obtained from external storage via a different known vulnerability on the device. The READ_EXTERNAL_STORAGE permission is necessary to access the log files containing the user's touch coordinates. With some effort, the user's touch coordinates can be mapped to key presses on a keyboard.
CVE-2018-15001 The Vivo V7 Android device with a build fingerprint of vivo/1718/1718:7.1.2/N2G47H/compil11021857:user/release-keys contains a platform app with a package name of com.vivo.bsptest (versionCode=1, versionName=1.0) containing an exported activity app component named com.vivo.bsptest.BSPTestActivity that allows any app co-located on the device to initiate the writing of the logcat log, bluetooth log, and kernel log to external storage. When logging is enabled, there is a notification in the status bar, so it is not completely transparent to the user. The user can cancel the logging, but it can be re-enabled since the app with a package name of com.vivo.bsptest cannot be disabled. The writing of these logs can be initiated by an app co-located on the device, although the READ_EXTERNAL_STORAGE permission is necessary to for an app to access the log files.
CVE-2018-15000 The Vivo V7 Android device with a build fingerprint of vivo/1718/1718:7.1.2/N2G47H/compil11021857:user/release-keys contains a platform app with a package name of com.vivo.smartshot (versionCode=1, versionName=3.0.0). This app contains an exported service named com.vivo.smartshot.ui.service.ScreenRecordService that will record the screen for 60 minutes and write the mp4 file to a location of the user's choosing. Normally, a recording notification will be visible to the user, but we discovered an approach to make it mostly transparent to the user by quickly removing a notification and floating icon. The user can see a floating icon and notification appear and disappear quickly due to quickly stopping and restarting the service with different parameters that do not interfere with the ongoing screen recording. The screen recording lasts for 60 minutes and can be written directly to the attacking app's private directory.
CVE-2018-14999 The Leagoo P1 device with a build fingerprint of sp7731c_1h10_32v4_bird:6.0/MRA58K/android.20170629.214736:user/release-keys contains a pre-installed platform app with a package name of com.wtk.factory (versionCode=1, versionName=1.0) that contains an exported broadcast receiver named com.wtk.factory.MMITestReceiver allows any app co-located on the device to programmatically initiate a factory reset. In addition, the app initiating the factory reset does not require any permissions. A factory reset will remove all user data and apps from the device. This will result in the loss of any data that have not been backed up or synced externally. The capability to perform a factory reset is not directly available to third-party apps (those that the user installs themselves with the exception of enabled Mobile Device Management (MDM) apps), although this capability can be obtained by leveraging an unprotected app component of a pre-installed platform app.
CVE-2018-14996 The Oppo F5 Android device with a build fingerprint of OPPO/CPH1723/CPH1723:7.1.1/N6F26Q/1513597833:user/release-keys contains a pre-installed platform app with a package name of com.dropboxchmod (versionCode=1, versionName=1.0) that contains an exported service named com.dropboxchmod.DropboxChmodService that allows any app co-located on the device to supply arbitrary commands to be executed as the system user. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. This vulnerability can also be used to secretly record audio of the user without their awareness on the Oppo F5 device. The pre-installed com.oppo.engineermode app (versionCode=25, versionName=V1.01) has an exported activity that can be started to initiate a recording and quickly dismissed. The activity can be started in a way that the user will not be able to see the app in the recent apps list. The resulting audio amr file can be copied from a location on internal storage using the arbitrary command execution as system user vulnerability. Executing commands as system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, obtain the user's text messages, and more.
CVE-2018-14994 The Essential Phone Android device with a build fingerprint of essential/mata/mata:8.1.0/OPM1.180104.166/297:user/release-keys contains a pre-installed platform app with a package name of com.ts.android.hiddenmenu (versionName=1.0, platformBuildVersionName=8.1.0) that contains an exported activity app component named com.ts.android.hiddenmenu.rtn.RTNResetActivity that allows any app co-located on the device to programmatically initiate a factory reset. In addition, the app initiating the factory reset does not require any permissions. A factory reset will remove all user data and apps from the device. This will result in the loss of any data that have not been backed up or synced externally. The capability to perform a factory reset is not directly available to third-party apps (those that the user installs themselves with the exception of enabled Mobile Device Management (MDM) apps), although this capability can be obtained by leveraging an unprotected app component of a pre-installed platform app.
CVE-2018-14993 The ASUS Zenfone V Live Android device with a build fingerprint of asus/VZW_ASUS_A009/ASUS_A009:7.1.1/NMF26F/14.0610.1802.78-20180313:user/release-keys and the Asus ZenFone 3 Max Android device with a build fingerprint of asus/US_Phone/ASUS_X008_1:7.0/NRD90M/US_Phone-14.14.1711.92-20171208:user/release-keys both contain a pre-installed platform app with a package name of com.asus.splendidcommandagent (versionCode=1510200090, versionName=1.2.0.18_160928) that contains an exported service named com.asus.splendidcommandagent.SplendidCommandAgentService that allows any app co-located on the device to supply arbitrary commands to be executed as the system user. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, obtain the user's text messages, and more.
CVE-2018-14992 The ASUS ZenFone 3 Max Android device with a build fingerprint of asus/US_Phone/ASUS_X008_1:7.0/NRD90M/US_Phone-14.14.1711.92-20171208:user/release-keys contains a pre-installed platform app with a package name of com.asus.dm (versionCode=1510500200, versionName=1.5.0.40_171122) has an exposed interface in an exported service named com.asus.dm.installer.DMInstallerService that allows any app co-located on the device to use its capabilities to download an arbitrary app over the internet and install it. Any app on the device can send an intent with specific embedded data that will cause the com.asus.dm app to programmatically download and install the app. For the app to be downloaded and installed, certain data needs to be provided: download URL, package name, version name from the app's AndroidManifest.xml file, and the MD5 hash of the app. Moreover, any app that is installed using this method can also be programmatically uninstalled using the same unprotected component named com.asus.dm.installer.DMInstallerService.
CVE-2018-14991 The Coolpad Defiant device with a build fingerprint of Coolpad/cp3632a/cp3632a:7.1.1/NMF26F/099480857:user/release-keys, the ZTE ZMAX Pro with a build fingerprint of ZTE/P895T20/urd:6.0.1/MMB29M/20170418.114928:user/release-keys, and the T-Mobile Revvl Plus with a build fingerprint of Coolpad/alchemy/alchemy:7.1.1/143.14.171129.3701A-TMO/buildf_nj_02-206:user/release-keys all contain a vulnerable, pre-installed Rich Communication Services (RCS) app. These devices contain an that app has a package name of com.suntek.mway.rcs.app.service (versionCode=1, versionName=RCS_sdk_M_native_20161008_01; versionCode=1, versionName=RCS_sdk_M_native_20170406_01) with an exported content provider named com.suntek.mway.rcs.app.service.provider.message.MessageProvider and a refactored version of the app with a package name of com.rcs.gsma.na.sdk (versionCode=1, versionName=RCS_SDK_20170804_01) with a content provider named com.rcs.gsma.na.provider.message.MessageProvider allow any app co-located on the device to read, write, insert, and modify the user's text messages. This is enabled by an exported content provider app component that serves as a wrapper to the official content provider that contains the user's text messages. This app cannot be disabled by the user and the attack can be performed by a zero-permission app.
CVE-2018-14990 The Coolpad Defiant device with a build fingerprint of Coolpad/cp3632a/cp3632a:7.1.1/NMF26F/099480857:user/release-keys, the ZTE ZMAX Pro with a build fingerprint of ZTE/P895T20/urd:6.0.1/MMB29M/20170418.114928:user/release-keys, and the T-Mobile Revvl Plus with a build fingerprint of Coolpad/alchemy/alchemy:7.1.1/143.14.171129.3701A-TMO/buildf_nj_02-206:user/release-keys all contain a vulnerable, pre-installed Rich Communication Services (RCS) app. These devices contain an that app has a package name of com.suntek.mway.rcs.app.service (versionCode=1, versionName=RCS_sdk_M_native_20161008_01; versionCode=1, versionName=RCS_sdk_M_native_20170406_01) with a broadcast receiver app component named com.suntek.mway.rcs.app.test.TestReceiver and a refactored version of the app with a package name of com.rcs.gsma.na.sdk (versionCode=1, versionName=RCS_SDK_20170804_01) with a broadcast receiver app component named com.rcs.gsma.na.test.TestReceiver allow any app co-located on the device to programmatically send text messages where the number and body of the text message is controlled by the attacker due to an exported broadcast receiver app component. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. A separate vulnerability in the app allows a zero-permission app to programmatically delete text messages, so the sent text messages can be removed to not alert the user.
CVE-2018-14988 The MXQ TV Box 4.4.2 Android device with a build fingerprint of MBX/m201_N/m201_N:4.4.2/KOT49H/20160106:user/test-keys contains the Android framework with a package name of android (versionCode=19, versionName=4.4.2-20170213) that contains an exported broadcast receiver application component that, when called, will make the device inoperable. The vulnerable component named com.android.server.SystemRestoreReceiver will write a value of --restore_system\n--locale=<localeto the /cache/recovery/command file and boot into recovery mode. During this process, it appears that when booting into recovery mode, the system partition gets formatted or modified and will be unable to boot properly thereafter. After the device wouldn't boot properly, a factory reset of the device in recovery mode does not regain properly functionality of the device. The com.android.server.SystemRestoreReceiver broadcast receiver app component is accessible to any app co-located on the device and does not require any permission to access. The user can most likely recover the device by flashing clean firmware images placed on an SD card.
CVE-2018-14987 The MXQ TV Box 4.4.2 Android device with a build fingerprint of MBX/m201_N/m201_N:4.4.2/KOT49H/20160106:user/test-keys contains the Android framework with a package name of android (versionCode=19, versionName=4.4.2-20170213) that dynamically registers a broadcast receiver app component named com.android.server.MasterClearReceiver instead of statically registering it in the AndroidManifest.xml file of the core Android package, as done in Android Open Source Project (AOSP) code for Android 4.4.2. The dynamic-registration of the MasterClearReceiver broadcast receiver app component is not protected with the android.permission.MASTER_CLEAR permission during registration, so any app co-located on the device, even those without any permissions, can programmatically initiate a factory reset of the device. A factory reset will remove all user data and apps from the device. This will result in the loss of any data that have not been backed up or synced externally. The capability to perform a factory reset is not directly available to third-party apps (those that the user installs themselves with the exception of enabled Mobile Device Management (MDM) apps), although this capability can be obtained by leveraging an unprotected app component of core Android process.
CVE-2018-14986 The Leagoo Z5C Android device with a build fingerprint of sp7731c_1h10_32v4_bird:6.0/MRA58K/android.20170629.214736:user/release-keys contains a pre-installed app with a package name of com.android.messaging (versionCode=1000110, versionName=1.0.001, (android.20170630.092853-0)) containing an exported content provider named com.android.messaging.datamodel.MessagingContentProvider. Any app co-located on the device can read the most recent text message from each conversation. That is, for each phone number where the user has either sent or received a text message from, a zero-permission third-party app can obtain the body of the text message, phone number, name of the contact (if it exists), and a timestamp for the most recent text message of each conversation. As the querying of the vulnerable content provider app component can be performed silently in the background, a malicious app can continuously monitor the content provider to see if the current message in each conversation has changed to obtain new text messages.
CVE-2018-14984 The Leagoo Z5C Android device with a build fingerprint of sp7731c_1h10_32v4_bird:6.0/MRA58K/android.20170629.214736:user/release-keys contains a pre-installed app with a package name of com.android.messaging (versionCode=1000110, versionName=1.0.001, (android.20170630.092853-0)) with an exported broadcast receiver app component named com.android.messaging.trackersender.TrackerSender. Any app co-located on the device, even one with no permissions, can send a broadcast intent with certain embedded data to the exported broadcast receiver application component that will result in the programmatic sending of a text message where the phone number and body of the text message is controlled by the attacker.
CVE-2018-14979 The ASUS ZenFone 3 Max Android device with a build fingerprint of asus/US_Phone/ASUS_X008_1:7.0/NRD90M/US_Phone-14.14.1711.92-20171208:user/release-keys contains a pre-installed app with a package name of com.asus.loguploader (versionCode=1570000275, versionName=7.0.0.55_170515). This app contains an exported service app component named com.asus.loguploader.LogUploaderService that, when accessed with a particular action string, will write a bugreport (kernel log, logcat log, and the state of system services including the text of active notifications), Wi-Fi Passwords, and other system data to external storage (sdcard). Any app with the READ_EXTERNAL_STORAGE permission on this device can read this data from the sdcard after it has been dumped there by the com.asus.loguploader. Third-party apps are not allowed to directly create a bugreport or access the user's stored wireless network credentials.
CVE-2018-14873 An issue was discovered in Rincewind 0.1. There is a cross-site scripting (XSS) vulnerability involving a p=account request to index.php and another file named commonPages.php.
CVE-2018-14872 An issue was discovered in Rincewind 0.1. A reinstall vulnerability exists because the parameter p of index.php and another file named commonPages.php allows an attacker to reinstall the product, with all data reset.
CVE-2018-1234 RSA Authentication Agent version 8.0.1 and earlier for Web for IIS is affected by a problem where access control list (ACL) permissions on a Windows Named Pipe were not sufficient to prevent access by unauthorized users. The attacker with local access to the system can exploit this vulnerability to read configuration properties for the authentication agent.
CVE-2018-1214 Dell EMC SupportAssist Enterprise version 1.1 creates a local Windows user account named "OMEAdapterUser" with a default password as part of the installation process. This unnecessary user account also remains even after an upgrade from v1.1 to v1.2. Access to the management console can be achieved by someone with knowledge of the default password. If SupportAssist Enterprise is installed on a server running OpenManage Essentials (OME), the OmeAdapterUser user account is added as a member of the OmeAdministrators group for the OME. An unauthorized person with knowledge of the default password and access to the OME web console could potentially use this account to gain access to the affected installation of OME with OmeAdministrators privileges. This is fixed in version 1.2.1.
CVE-2018-11546 md4c 0.2.5 has a heap-based buffer over-read because md_is_named_entity_contents has an off-by-one error.
CVE-2018-11479 The VPN component in Windscribe 1.81 uses the OpenVPN client for connections. Also, it creates a WindScribeService.exe system process that establishes a \\.\pipe\WindscribeService named pipe endpoint that allows the Windscribe VPN process to connect and execute an OpenVPN process or other processes (like taskkill, etc.). There is no validation of the program name before constructing the lpCommandLine argument for a CreateProcess call. An attacker can run any malicious process with SYSTEM privileges through this named pipe.
CVE-2018-11334 Windscribe 1.81 creates a named pipe with a NULL DACL that allows Everyone users to gain privileges or cause a denial of service via \\.\pipe\WindscribeService.
CVE-2018-11062 Integrated Data Protection Appliance versions 2.0, 2.1, and 2.2 contain undocumented accounts named 'support' and 'admin' that are protected with default passwords. These accounts have limited privileges and can access certain system files only. A malicious user with the knowledge of the default passwords may potentially log in to the system and gain read and write access to certain system files.
CVE-2018-10769 The transferProxy and approveProxy functions of a smart contract implementation for SmartMesh (SMT), an Ethereum ERC20 token, allow attackers to accomplish an unauthorized transfer of digital assets because replay attacks can occur with the same-named functions (with the same signatures) in other tokens: First (FST), GG Token (GG), M2C Mesh Network (MTC), M2C Mesh Network (mesh), and UG Token (UGT).
CVE-2018-0823 The Named Pipe File System in Windows 10 version 1709 and Windows Server, version 1709 allows an elevation of privilege vulnerability due to the way the Named Pipe File System handles objects, aka "Named Pipe File System Elevation of Privilege Vulnerability".
CVE-2018-0502 An issue was discovered in zsh before 5.6. The beginning of a #! script file was mishandled, potentially leading to an execve call to a program named on the second line.
CVE-2017-8765 The function named ReadICONImage in coders\icon.c in ImageMagick 7.0.5-5 has a memory leak vulnerability which can cause memory exhaustion via a crafted ICON file.
CVE-2017-8393 The Binary File Descriptor (BFD) library (aka libbfd), as distributed in GNU Binutils 2.28, is vulnerable to a global buffer over-read error because of an assumption made by code that runs for objcopy and strip, that SHT_REL/SHR_RELA sections are always named starting with a .rel/.rela prefix. This vulnerability causes programs that conduct an analysis of binary programs using the libbfd library, such as objcopy and strip, to crash.
CVE-2017-8335 An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of setting name for wireless network. These values are stored by the device in NVRAM (Non-volatile RAM). It seems that the POST parameters passed in this request to set up names on the device do not have a string length check on them. This allows an attacker to send a large payload in the "mssid_1" POST parameter. The device also allows a user to view the name of the Wifi Network set by the user. While processing this request, the device calls a function named "getCfgToHTML" at address 0x004268A8 which retrieves the value set earlier by "mssid_1" parameter as SSID2 and this value then results in overflowing the stack set up for this function and allows an attacker to control $ra register value on the stack which allows an attacker to control the device by executing a payload of an attacker's choice. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST parameter "mssid_1" at address 0x0042BA00 and then sets in the NVRAM at address 0x0042C314. The value is later retrieved in the function "getCfgToHTML" at address 0x00426924 and this results in overflowing the buffer due to "strcat" function that is utilized by this function.
CVE-2017-7796 On Windows systems, the logger run by the Windows updater deletes the file "update.log" before it runs in order to write a new log of that name. The path to this file is supplied at the command line to the updater and could be used in concert with another local exploit to delete a different file named "update.log" instead of the one intended. Note: This attack only affects Windows operating systems. Other operating systems are not affected. This vulnerability affects Firefox < 55.
CVE-2017-7336 A hard-coded account named 'upgrade' in Fortinet FortiWLM 8.3.0 and lower versions allows a remote attacker to log-in and execute commands with 'upgrade' account privileges.
CVE-2017-7281 An issue was discovered in Unitrends Enterprise Backup before 9.1.2. A lack of sanitization of user input in the createReportName and saveReport functions in recoveryconsole/bpl/reports.php allows for an authenticated user to create a randomly named file on disk with a user-controlled extension, contents, and path, leading to remote code execution, aka Unrestricted File Upload.
CVE-2017-6033 A DLL Hijacking issue was discovered in Schneider Electric Interactive Graphical SCADA System (IGSS) Software, Version 12 and previous versions. The software will execute a malicious file if it is named the same as a legitimate file and placed in a location that is earlier in the search path.
CVE-2017-3145 BIND was improperly sequencing cleanup operations on upstream recursion fetch contexts, leading in some cases to a use-after-free error that can trigger an assertion failure and crash in named. Affects BIND 9.0.0 to 9.8.x, 9.9.0 to 9.9.11, 9.10.0 to 9.10.6, 9.11.0 to 9.11.2, 9.9.3-S1 to 9.9.11-S1, 9.10.5-S1 to 9.10.6-S1, 9.12.0a1 to 9.12.0rc1.
CVE-2017-3140 If named is configured to use Response Policy Zones (RPZ) an error processing some rule types can lead to a condition where BIND will endlessly loop while handling a query. Affects BIND 9.9.10, 9.10.5, 9.11.0->9.11.1, 9.9.10-S1, 9.10.5-S1.
CVE-2017-3139 A denial of service flaw was found in the way BIND handled DNSSEC validation. A remote attacker could use this flaw to make named exit unexpectedly with an assertion failure via a specially crafted DNS response.
CVE-2017-3138 named contains a feature which allows operators to issue commands to a running server by communicating with the server process over a control channel, using a utility program such as rndc. A regression introduced in a recent feature change has created a situation under which some versions of named can be caused to exit with a REQUIRE assertion failure if they are sent a null command string. Affects BIND 9.9.9->9.9.9-P7, 9.9.10b1->9.9.10rc2, 9.10.4->9.10.4-P7, 9.10.5b1->9.10.5rc2, 9.11.0->9.11.0-P4, 9.11.1b1->9.11.1rc2, 9.9.9-S1->9.9.9-S9.
CVE-2017-3137 Mistaken assumptions about the ordering of records in the answer section of a response containing CNAME or DNAME resource records could lead to a situation in which named would exit with an assertion failure when processing a response in which records occurred in an unusual order. Affects BIND 9.9.9-P6, 9.9.10b1->9.9.10rc1, 9.10.4-P6, 9.10.5b1->9.10.5rc1, 9.11.0-P3, 9.11.1b1->9.11.1rc1, and 9.9.9-S8.
CVE-2017-2802 An exploitable dll hijacking vulnerability exists in the poaService.exe service component of the Dell Precision Optimizer software version 3.5.5.0. A specifically named malicious dll file located in one of directories pointed to by the PATH environment variable will lead to privilege escalation. An attacker with local access to vulnerable system can exploit this vulnerability.
CVE-2017-18263 Seagate Media Server in Seagate Personal Cloud before 4.3.18.4 has directory traversal in getPhotoPlaylistPhotos.psp via a parameter named url.
CVE-2017-16355 In agent/Core/SpawningKit/Spawner.h in Phusion Passenger 5.1.10 (fixed in Passenger Open Source 5.1.11 and Passenger Enterprise 5.1.10), if Passenger is running as root, it is possible to list the contents of arbitrary files on a system by symlinking a file named REVISION from the application root folder to a file of choice and querying passenger-status --show=xml.
CVE-2017-15078 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15077 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15076 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15075 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15074 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15073 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15072 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15071 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15070 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15069 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15068 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15067 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15066 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15065 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15064 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue associated with the originally named downstream provider. Notes: none.
CVE-2017-15011 The named pipes in qtsingleapp in Qt 5.x, as used in qBittorrent and SugarSync, are configured for remote access and allow remote attackers to cause a denial of service (application crash) via an unspecified string.
CVE-2017-11735 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue in the originally named product. Notes: none.
CVE-2017-1087 In FreeBSD 10.x before 10.4-STABLE, 10.4-RELEASE-p3, and 10.3-RELEASE-p24 named paths are globally scoped, meaning a process located in one jail can read and modify the content of POSIX shared memory objects created by a process in another jail or the host system. As a result, a malicious user that has access to a jailed system is able to abuse shared memory by injecting malicious content in the shared memory region. This memory region might be executed by applications trusting the shared memory, like Squid. This issue could lead to a Denial of Service or local privilege escalation.
CVE-2016-9638 In BMC Patrol before 9.13.10.02, the binary "listguests64" is configured with the setuid bit. However, when executing it, it will look for a binary named "virsh" using the PATH environment variable. The "listguests64" program will then run "virsh" using root privileges. This allows local users to elevate their privileges to root.
CVE-2016-9570 cb.exe in Carbon Black 5.1.1.60603 allows attackers to cause a denial of service (out-of-bounds read, invalid pointer dereference, and application crash) by leveraging access to the NetMon named pipe.
CVE-2016-9444 named in ISC BIND 9.x before 9.9.9-P5, 9.10.x before 9.10.4-P5, and 9.11.x before 9.11.0-P2 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a crafted DS resource record in an answer.
CVE-2016-9147 named in ISC BIND 9.9.9-P4, 9.9.9-S6, 9.10.4-P4, and 9.11.0-P1 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a response containing an inconsistency among the DNSSEC-related RRsets.
CVE-2016-9131 named in ISC BIND 9.x before 9.9.9-P5, 9.10.x before 9.10.4-P5, and 9.11.x before 9.11.0-P2 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a malformed response to an RTYPE ANY query.
CVE-2016-8864 named in ISC BIND 9.x before 9.9.9-P4, 9.10.x before 9.10.4-P4, and 9.11.x before 9.11.0-P1 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a DNAME record in the answer section of a response to a recursive query, related to db.c and resolver.c.
CVE-2016-8491 The presence of a hardcoded account named 'core' in Fortinet FortiWLC allows attackers to gain unauthorized read/write access via a remote shell.
CVE-2016-5249 Lenovo Solution Center (LSC) before 3.3.003 allows local users to execute arbitrary code with LocalSystem privileges via vectors involving the LSC.Services.SystemService StartProxy command with a named pipe created in advance and crafted .NET assembly.
CVE-2016-2776 buffer.c in named in ISC BIND 9 before 9.9.9-P3, 9.10.x before 9.10.4-P3, and 9.11.x before 9.11.0rc3 does not properly construct responses, which allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a crafted query.
CVE-2016-2775 ISC BIND 9.x before 9.9.9-P2, 9.10.x before 9.10.4-P2, and 9.11.x before 9.11.0b2, when lwresd or the named lwres option is enabled, allows remote attackers to cause a denial of service (daemon crash) via a long request that uses the lightweight resolver protocol.
CVE-2016-2088 resolver.c in named in ISC BIND 9.10.x before 9.10.3-P4, when DNS cookies are enabled, allows remote attackers to cause a denial of service (INSIST assertion failure and daemon exit) via a malformed packet with more than one cookie option.
CVE-2016-1286 named in ISC BIND 9.x before 9.9.8-P4 and 9.10.x before 9.10.3-P4 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a crafted signature record for a DNAME record, related to db.c and resolver.c.
CVE-2016-1285 named in ISC BIND 9.x before 9.9.8-P4 and 9.10.x before 9.10.3-P4 does not properly handle DNAME records when parsing fetch reply messages, which allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a malformed packet to the rndc (aka control channel) interface, related to alist.c and sexpr.c.
CVE-2016-1283 The pcre_compile2 function in pcre_compile.c in PCRE 8.38 mishandles the /((?:F?+(?:^(?(R)a+\"){99}-))(?J)(?'R'(?'R'<((?'RR'(?'R'\){97)?J)?J)(?'R'(?'R'\){99|(:(?|(?'R')(\k'R')|((?'R')))H'R'R)(H'R))))))/ pattern and related patterns with named subgroups, which allows remote attackers to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact via a crafted regular expression, as demonstrated by a JavaScript RegExp object encountered by Konqueror.
CVE-2016-1202 Untrusted search path vulnerability in Atom Electron before 0.33.5 allows local users to gain privileges via a Trojan horse Node.js module in a parent directory of a directory named on a require line.
CVE-2016-10395 In FlexNet Publisher versions before Luton SP1 (11.14.1.1) running FlexNet Publisher Licensing Service on Windows platform, a boundary error related to a named pipe within the FlexNet Publisher Licensing Service can be exploited to cause an out-of-bounds memory read access and subsequently execute arbitrary code with SYSTEM privileges.
CVE-2016-10138 An issue was discovered on BLU Advance 5.0 and BLU R1 HD devices with Shanghai Adups software. The com.adups.fota.sysoper app is installed as a system app and cannot be disabled by the user. In the com.adups.fota.sysoper app's AndroidManifest.xml file, it sets the android:sharedUserId attribute to a value of android.uid.system which makes it execute as the system user, which is a very privileged user on the device. The app has an exported broadcast receiver named com.adups.fota.sysoper.WriteCommandReceiver which any app on the device can interact with. Therefore, any app can send a command embedded in an intent which will be executed by the WriteCommandReceiver component which is executing as the system user. The third-party app, utilizing the WriteCommandReceiver, can perform the following actions: call a phone number, factory reset the device, take pictures of the screen, record the screen in a video, install applications, inject events, obtain the Android log, and others. In addition, the com.adups.fota.sysoper.TaskService component will make a request to a URL of http://rebootv5.adsunflower.com/ps/fetch.do where the commands in the String array with a key of sf in the JSON Object sent back by the server will be executed as the system user. Since the connection is made via HTTP, it is vulnerable to a MITM attack.
CVE-2016-10137 An issue was discovered on BLU R1 HD devices with Shanghai Adups software. The content provider named com.adups.fota.sysoper.provider.InfoProvider in the app with a package name of com.adups.fota.sysoper allows any app on the device to read, write, and delete files as the system user. In the com.adups.fota.sysoper app's AndroidManifest.xml file, it sets the android:sharedUserId attribute to a value of android.uid.system which makes it execute as the system user, which is a very privileged user on the device. This allows a third-party app to read, write, and delete the user's sent and received text messages and call log. This allows a third-party app to obtain PII from the user without permission to do so.
CVE-2016-10136 An issue was discovered on BLU R1 HD devices with Shanghai Adups software. The content provider named com.adups.fota.sysoper.provider.InfoProvider in the app with a package name of com.adups.fota.sysoper allows any app on the device to read, write, and delete files as the system user. In the com.adups.fota.sysoper app's AndroidManifest.xml file, it sets the android:sharedUserId attribute to a value of android.uid.system which makes it execute as the system user, which is a very privileged user on the device. This allows a third-party app to read, write, and delete files owned by the system user. The third-party app can modify the /data/system/users/0/settings_secure.xml file to add an app as a notification listener to be able to receive the text of notifications as they are received on the device. This also allows the /data/system/users/0/accounts.db to be read which contains authentication tokens for various accounts on the device. The third-party app can obtain privileged information and also modify files to obtain more privileges on the device.
CVE-2015-8800 Symantec Embedded Security: Critical System Protection (SES:CSP) 1.0.x before 1.0 MP5, Embedded Security: Critical System Protection for Controllers and Devices (SES:CSP) 6.5.0 before MP1, Critical System Protection (SCSP) before 5.2.9 MP6, Data Center Security: Server Advanced Server (DCS:SA) 6.x before 6.5 MP1 and 6.6 before MP1, and Data Center Security: Server Advanced Server and Agents (DCS:SA) through 6.6 MP1 allow remote authenticated users to conduct argument-injection attacks by leveraging certain named-pipe access.
CVE-2015-8705 buffer.c in named in ISC BIND 9.10.x before 9.10.3-P3, when debug logging is enabled, allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit, or daemon crash) or possibly have unspecified other impact via (1) OPT data or (2) an ECS option.
CVE-2015-8622 Cross-site scripting (XSS) vulnerability in MediaWiki before 1.23.12, 1.24.x before 1.24.5, 1.25.x before 1.25.4, and 1.26.x before 1.26.1, when is configured with a relative URL, allows remote authenticated users to inject arbitrary web script or HTML via wikitext, as demonstrated by a wikilink to a page named "javascript:alert('XSS!')."
CVE-2015-8461 Race condition in resolver.c in named in ISC BIND 9.9.8 before 9.9.8-P2 and 9.10.3 before 9.10.3-P2 allows remote attackers to cause a denial of service (INSIST assertion failure and daemon exit) via unspecified vectors.
CVE-2015-8381 The compile_regex function in pcre_compile.c in PCRE before 8.38 and pcre2_compile.c in PCRE2 before 10.2x mishandles the /(?J:(?|(:(?|(?'R')(\k'R')|((?'R')))H'Rk'Rf)|s(?'R'))))/ and /(?J:(?|(:(?|(?'R')(\z(?|(?'R')(\k'R')|((?'R')))k'R')|((?'R')))H'Ak'Rf)|s(?'R')))/ patterns, and related patterns with certain group references, which allows remote attackers to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact via a crafted regular expression, as demonstrated by a JavaScript RegExp object encountered by Konqueror.
CVE-2015-8000 db.c in named in ISC BIND 9.x before 9.9.8-P2 and 9.10.x before 9.10.3-P2 allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via a malformed class attribute.
CVE-2015-7888 Directory traversal vulnerability in the WifiHs20UtilityService on the Samsung S6 Edge LRX22G.G925VVRU1AOE2 allows remote attackers to overwrite or create arbitrary files as the system-level user via a .. (dot dot) in the name of a file, compressed into a zipped file named cred.zip, and downloaded to /sdcard/Download.
CVE-2015-7865 nvSCPAPISvr.exe in the Stereoscopic 3D Driver Service in the NVIDIA GPU graphics driver R340 before 341.92, R352 before 354.35, and R358 before 358.87 on Windows does not properly restrict access to the stereosvrpipe named pipe, which allows local users to gain privileges via a commandline in a number 2 command, which is stored in the HKEY_LOCAL_MACHINE explorer Run registry key, a different vulnerability than CVE-2011-4784.
CVE-2015-5986 openpgpkey_61.c in named in ISC BIND 9.9.7 before 9.9.7-P3 and 9.10.x before 9.10.2-P4 allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via a crafted DNS response.
CVE-2015-5722 buffer.c in named in ISC BIND 9.x before 9.9.7-P3 and 9.10.x before 9.10.2-P4 allows remote attackers to cause a denial of service (assertion failure and daemon exit) by creating a zone containing a malformed DNSSEC key and issuing a query for a name in that zone.
CVE-2015-5477 named in ISC BIND 9.x before 9.9.7-P2 and 9.10.x before 9.10.2-P3 allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via TKEY queries.
CVE-2015-5457 PivotX before 2.3.11 does not validate the new file extension when renaming a file with multiple extensions, which allows remote attackers to execute arbitrary code by uploading a crafted file, as demonstrated by a file named foo.php.php.
CVE-2015-5153 Pulp does not remove permissions for named objects upon deletion, which allows authenticated users to gain the privileges of a deleted object via creating an object with the same name.
CVE-2015-4620 name.c in named in ISC BIND 9.7.x through 9.9.x before 9.9.7-P1 and 9.10.x before 9.10.2-P2, when configured as a recursive resolver with DNSSEC validation, allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) by constructing crafted zone data and then making a query for a name in that zone.
CVE-2015-3421 The eshop_checkout function in checkout.php in the Wordpress Eshop plugin 6.3.11 and earlier does not validate variables in the "eshopcart" HTTP cookie, which allows remote attackers to perform cross-site scripting (XSS) attacks, or a path disclosure attack via crafted variables named after target PHP variables.
CVE-2015-3170 selinux-policy when sysctl fs.protected_hardlinks are set to 0 allows local users to cause a denial of service (SSH login prevention) by creating a hardlink to /etc/passwd from a directory named .config, and updating selinux-policy.
CVE-2015-2219 Lenovo System Update (formerly ThinkVantage System Update) before 5.06.0034 uses predictable security tokens, which allows local users to gain privileges by sending a valid token with a command to the System Update service (SUService.exe) through an unspecified named pipe.
CVE-2015-1353 ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it cannot be considered a security issue in the originally named product because of that product's specification. Notes: none.
CVE-2015-1349 named in ISC BIND 9.7.0 through 9.9.6 before 9.9.6-P2 and 9.10.x before 9.10.1-P2, when DNSSEC validation and the managed-keys feature are enabled, allows remote attackers to cause a denial of service (assertion failure and daemon exit, or daemon crash) by triggering an incorrect trust-anchor management scenario in which no key is ready for use.
CVE-2015-0925 The client in iPass Open Mobile before 2.4.5 on Windows allows remote authenticated users to execute arbitrary code via a DLL pathname in a crafted Unicode string that is improperly handled by a subprocess reached through a named pipe, as demonstrated by a UNC share pathname.
CVE-2015-0923 The ContentBlockEx method in Workarea/ServerControlWS.asmx in Ektron Content Management System (CMS) 8.5 and 8.7 before 8.7sp2 and 9.0 before sp1 allows remote attackers to read arbitrary files via an external entity declaration in conjunction with an entity reference within an XML document named in the xslt parameter, related to an XML External Entity (XXE) issue.
CVE-2015-0010 The CryptProtectMemory function in cng.sys (aka the Cryptography Next Generation driver) in the kernel-mode drivers in Microsoft Windows Server 2003 SP2, Windows Vista SP2, Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8, Windows 8.1, Windows Server 2012 Gold and R2, and Windows RT Gold and 8.1, when the CRYPTPROTECTMEMORY_SAME_LOGON option is used, does not check an impersonation token's level, which allows local users to bypass intended decryption restrictions by leveraging a service that (1) has a named-pipe planting vulnerability or (2) uses world-readable shared memory for encrypted data, aka "CNG Security Feature Bypass Vulnerability" or MSRC ID 20707.
CVE-2014-8680 The GeoIP functionality in ISC BIND 9.10.0 through 9.10.1 allows remote attackers to cause a denial of service (assertion failure and named exit) via vectors related to (1) the lack of GeoIP databases for both IPv4 and IPv6, or (2) IPv6 support with certain options.
CVE-2014-8636 The XrayWrapper implementation in Mozilla Firefox before 35.0 and SeaMonkey before 2.32 does not properly interact with a DOM object that has a named getter, which might allow remote attackers to execute arbitrary JavaScript code with chrome privileges via unspecified vectors.
CVE-2014-8500 ISC BIND 9.0.x through 9.8.x, 9.9.0 through 9.9.6, and 9.10.0 through 9.10.1 does not limit delegation chaining, which allows remote attackers to cause a denial of service (memory consumption and named crash) via a large or infinite number of referrals.
CVE-2014-3910 Emurasoft EmFTP allows local users to gain privileges via a Trojan horse executable file that is launched during an attempt to read a similarly named file that lacks a filename extension.
CVE-2014-3859 libdns in ISC BIND 9.10.0 before P2 does not properly handle EDNS options, which allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via a crafted packet, as demonstrated by an attack against named, dig, or delv.
CVE-2014-3214 The prefetch implementation in named in ISC BIND 9.10.0, when a recursive nameserver is enabled, allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via a DNS query that triggers a response with unspecified attributes.
CVE-2014-0591 The query_findclosestnsec3 function in query.c in named in ISC BIND 9.6, 9.7, and 9.8 before 9.8.6-P2 and 9.9 before 9.9.4-P2, and 9.6-ESV before 9.6-ESV-R10-P2, allows remote attackers to cause a denial of service (INSIST assertion failure and daemon exit) via a crafted DNS query to an authoritative nameserver that uses the NSEC3 signing feature.
CVE-2013-6652 Directory traversal vulnerability in sandbox/win/src/named_pipe_dispatcher.cc in Google Chrome before 33.0.1750.117 on Windows allows attackers to bypass intended named-pipe policy restrictions in the sandbox via vectors related to (1) lack of checks for .. (dot dot) sequences or (2) lack of use of the \\?\ protection mechanism.
CVE-2013-4885 The http-domino-enum-passwords.nse script in NMap before 6.40, when domino-enum-passwords.idpath is set, allows remote servers to upload "arbitrarily named" files via a crafted FullName parameter in a response, as demonstrated using directory traversal sequences.
CVE-2013-4854 The RFC 5011 implementation in rdata.c in ISC BIND 9.7.x and 9.8.x before 9.8.5-P2, 9.8.6b1, 9.9.x before 9.9.3-P2, and 9.9.4b1, and DNSco BIND 9.9.3-S1 before 9.9.3-S1-P1 and 9.9.4-S1b1, allows remote attackers to cause a denial of service (assertion failure and named daemon exit) via a query with a malformed RDATA section that is not properly handled during construction of a log message, as exploited in the wild in July 2013.
CVE-2013-3919 resolver.c in ISC BIND 9.8.5 before 9.8.5-P1, 9.9.3 before 9.9.3-P1, and 9.6-ESV-R9 before 9.6-ESV-R9-P1, when a recursive resolver is configured, allows remote attackers to cause a denial of service (assertion failure and named daemon exit) via a query for a record in a malformed zone.
CVE-2013-3367 Undocumented TELNET service in TRENDnet TEW-691GR and TEW-692GR when a web page named backdoor contains an HTML parameter of password and a value of j78G¬DFdg_24Mhw3.
CVE-2013-3366 Undocumented TELNET service in TRENDnet TEW-812DRU when a web page named backdoor contains an HTML parameter of password and a value of j78G¬DFdg_24Mhw3.
CVE-2013-3031 A SQL stored procedure in the Universal Cache component in IBM solidDB 6.0.x before 6.0.1070, 6.3.x before 6.3.0.56, 6.5.x before 6.5.0.12, and 7.0.x before 7.0.0.4 allows remote authenticated users to cause a denial of service (uninitialized-memory access and daemon crash) via a call that includes named arguments and default parameter values, but does not include all of the expected arguments.
CVE-2013-2905 The SharedMemory::Create function in memory/shared_memory_posix.cc in Google Chrome before 29.0.1547.57 uses weak permissions under /dev/shm/, which allows attackers to obtain sensitive information via direct access to a POSIX shared-memory file.
CVE-2013-2266 libdns in ISC BIND 9.7.x and 9.8.x before 9.8.4-P2, 9.8.5 before 9.8.5b2, 9.9.x before 9.9.2-P2, and 9.9.3 before 9.9.3b2 on UNIX platforms allows remote attackers to cause a denial of service (memory consumption) via a crafted regular expression, as demonstrated by a memory-exhaustion attack against a machine running a named process.
CVE-2012-5689 ISC BIND 9.8.x through 9.8.4-P1 and 9.9.x through 9.9.2-P1, in certain configurations involving DNS64 with a Response Policy Zone that lacks an AAAA rewrite rule, allows remote attackers to cause a denial of service (assertion failure and named daemon exit) via a query for an AAAA record.
CVE-2012-5688 ISC BIND 9.8.x before 9.8.4-P1 and 9.9.x before 9.9.2-P1, when DNS64 is enabled, allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a crafted query.
CVE-2012-5166 ISC BIND 9.x before 9.7.6-P4, 9.8.x before 9.8.3-P4, 9.9.x before 9.9.1-P4, and 9.4-ESV and 9.6-ESV before 9.6-ESV-R7-P4 allows remote attackers to cause a denial of service (named daemon hang) via unspecified combinations of resource records.
CVE-2012-4244 ISC BIND 9.x before 9.7.6-P3, 9.8.x before 9.8.3-P3, 9.9.x before 9.9.1-P3, and 9.4-ESV and 9.6-ESV before 9.6-ESV-R7-P3 allows remote attackers to cause a denial of service (assertion failure and named daemon exit) via a query for a long resource record.
CVE-2012-3429 The dns_to_ldap_dn_escape function in src/ldap_convert.c in bind-dyndb-ldap 1.1.0rc1 and earlier does not properly escape distinguished names (DN) for LDAP queries, which allows remote DNS servers to cause a denial of service (named service hang) via a "$" character in a DN in a DNS query.
CVE-2012-2134 The handle_connection_error function in ldap_helper.c in bind-dyndb-ldap before 1.1.0rc1 does not properly handle LDAP query errors, which allows remote attackers to cause a denial of service (infinite loop and named server hang) via a non-alphabet character in the base DN in an LDAP search DNS query.
CVE-2012-1033 The resolver in ISC BIND 9 through 9.8.1-P1 overwrites cached server names and TTL values in NS records during the processing of a response to an A record query, which allows remote attackers to trigger continued resolvability of revoked domain names via a "ghost domain names" attack.
CVE-2011-4834 The GetInstalledPackages function in the configuration tool in HP Application Lifestyle Management (ALM) 11 on AIX, HP-UX, and Solaris allows local users to gain privileges via (1) a Trojan horse /tmp/tmp.txt FIFO or (2) a symlink attack on /tmp/tmp.txt.
CVE-2011-4784 The NVIDIA Stereoscopic 3D driver before 7.17.12.7565 does not properly handle commands sent to a named pipe, which allows local users to gain privileges via a crafted application.
CVE-2011-4313 query.c in ISC BIND 9.0.x through 9.6.x, 9.4-ESV through 9.4-ESV-R5, 9.6-ESV through 9.6-ESV-R5, 9.7.0 through 9.7.4, 9.8.0 through 9.8.1, and 9.9.0a1 through 9.9.0b1 allows remote attackers to cause a denial of service (assertion failure and named exit) via unknown vectors related to recursive DNS queries, error logging, and the caching of an invalid record by the resolver.
CVE-2011-2465 Unspecified vulnerability in ISC BIND 9 9.8.0, 9.8.0-P1, 9.8.0-P2, and 9.8.1b1, when recursion is enabled and the Response Policy Zone (RPZ) contains DNAME or certain CNAME records, allows remote attackers to cause a denial of service (named daemon crash) via an unspecified query.
CVE-2011-2464 Unspecified vulnerability in ISC BIND 9 9.6.x before 9.6-ESV-R4-P3, 9.7.x before 9.7.3-P3, and 9.8.x before 9.8.0-P4 allows remote attackers to cause a denial of service (named daemon crash) via a crafted UPDATE request.
CVE-2011-1910 Off-by-one error in named in ISC BIND 9.x before 9.7.3-P1, 9.8.x before 9.8.0-P2, 9.4-ESV before 9.4-ESV-R4-P1, and 9.6-ESV before 9.6-ESV-R4-P1 allows remote DNS servers to cause a denial of service (assertion failure and daemon exit) via a negative response containing large RRSIG RRsets.
CVE-2011-1223 Buffer overflow in the Alternate Data Stream (aka ADS or named stream) functionality in the backup-archive client in IBM Tivoli Storage Manager (TSM) before 5.4.3.4, 5.5.x before 5.5.3, 6.x before 6.1.4, and 6.2.x before 6.2.2 on Windows allows local users to gain privileges via unspecified vectors.
CVE-2011-0079 Multiple unspecified vulnerabilities in the browser engine in Mozilla Firefox 4.x before 4.0.1 allow remote attackers to cause a denial of service (memory corruption and application crash) or possibly execute arbitrary code via vectors related to gfx/layers/d3d10/ReadbackManagerD3D10.cpp and unknown other vectors.
CVE-2010-4256 The pipe_fcntl function in fs/pipe.c in the Linux kernel before 2.6.37 does not properly determine whether a file is a named pipe, which allows local users to cause a denial of service via an F_SETPIPE_SZ fcntl call.
CVE-2010-3615 named in ISC BIND 9.7.2-P2 does not check all intended locations for allow-query ACLs, which might allow remote attackers to make successful requests for private DNS records via the standard DNS query mechanism.
CVE-2010-3614 named in ISC BIND 9.x before 9.6.2-P3, 9.7.x before 9.7.2-P3, 9.4-ESV before 9.4-ESV-R4, and 9.6-ESV before 9.6-ESV-R3 does not properly determine the security status of an NS RRset during a DNSKEY algorithm rollover, which might allow remote attackers to cause a denial of service (DNSSEC validation error) by triggering a rollover.
CVE-2010-3613 named in ISC BIND 9.6.2 before 9.6.2-P3, 9.6-ESV before 9.6-ESV-R3, and 9.7.x before 9.7.2-P3 does not properly handle the combination of signed negative responses and corresponding RRSIG records in the cache, which allows remote attackers to cause a denial of service (daemon crash) via a query for cached data.
CVE-2010-3315 authz.c in the mod_dav_svn module for the Apache HTTP Server, as distributed in Apache Subversion 1.5.x before 1.5.8 and 1.6.x before 1.6.13, when SVNPathAuthz short_circuit is enabled, does not properly handle a named repository as a rule scope, which allows remote authenticated users to bypass intended access restrictions via svn commands.
CVE-2010-2793 Race condition in the SPICE (aka spice-activex) plug-in for Internet Explorer in Red Hat Enterprise Virtualization (RHEV) Manager before 2.2.4 allows local users to create a certain named pipe, and consequently gain privileges, via vectors involving knowledge of the name of this named pipe, in conjunction with use of the ImpersonateNamedPipeClient function.
CVE-2010-2554 The Tracing Feature for Services in Microsoft Windows Vista SP1 and SP2, Windows Server 2008 Gold, SP2, and R2, and Windows 7 has incorrect ACLs on its registry keys, which allows local users to gain privileges via vectors involving a named pipe and impersonation, aka "Tracing Registry Key ACL Vulnerability."
CVE-2010-2491 Cross-site scripting (XSS) vulnerability in cgi/client.py in Roundup before 1.4.14 allows remote attackers to inject arbitrary web script or HTML via the template argument to the /issue program.
CVE-2010-1940 Apple Safari 4.0.5 on Windows sends the "Authorization: Basic" header appropriate for one web site to a different web site named in a Location header received from the first site, which allows remote web servers to obtain sensitive information by logging HTTP requests. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.
CVE-2010-1906 tgsrv.exe in the Repair Service in Consona Dynamic Agent, Repair Manager, Subscriber Activation, and Subscriber Agent relies on a predictable timestamp field to validate input to the \\.\pipe\__RepairService_pipe__company named pipe, which allows remote authenticated users to execute arbitrary code by obtaining the current time from (1) tcpip.sys or (2) an SMB2 service.
CVE-2010-1325 Cross-site request forgery (CSRF) vulnerability in the apache2-slms package in SUSE Lifecycle Management Server (SLMS) 1.0 on SUSE Linux Enterprise (SLE) 11 allows remote attackers to hijack the authentication of unspecified victims via vectors related to improper parameter quoting. NOTE: some sources report that this is a vulnerability in a product named "Apache SLMS," but that is incorrect.
CVE-2010-0426 sudo 1.6.x before 1.6.9p21 and 1.7.x before 1.7.2p4, when a pseudo-command is enabled, permits a match between the name of the pseudo-command and the name of an executable file in an arbitrary directory, which allows local users to gain privileges via a crafted executable file, as demonstrated by a file named sudoedit in a user's home directory.
CVE-2009-4643 Stack-based buffer overflow in dsInstallerService.dll in the Juniper Installer Service, as used in Juniper Odyssey Access Client 4.72.11421.0 and other products, allows remote attackers to execute arbitrary code via a long string in a malformed DSSETUPSERVICE_CMD_UNINSTALL command to the NeoterisSetupService named pipe.
CVE-2009-2140 Multiple heap-based buffer overflows in cppcanvas/source/mtfrenderer/emfplus.cxx in Go-oo 2.x and 3.x before 3.0.1, previously named ooo-build and related to OpenOffice.org (OOo), allow remote attackers to execute arbitrary code via a crafted EMF+ file, a similar issue to CVE-2008-2238.
CVE-2009-2139 Heap-based buffer overflow in svtools/source/filter.vcl/wmf/enhwmf.cxx in Go-oo 2.x and 3.x before 3.0.1, previously named ooo-build and related to OpenOffice.org (OOo), allows remote attackers to execute arbitrary code via a crafted EMF file, a similar issue to CVE-2008-2238.
CVE-2009-1394 Stack-based buffer overflow in Motorola Timbuktu Pro 8.6.5 on Windows allows remote attackers to execute arbitrary code by sending a long malformed string over the PlughNTCommand named pipe.
CVE-2009-1350 Unspecified vulnerability in xtagent.exe in Novell NetIdentity Client before 1.2.4 allows remote attackers to execute arbitrary code by establishing an IPC$ connection to the XTIERRPCPIPE named pipe, and sending RPC messages that trigger a dereference of an arbitrary pointer.
CVE-2009-0696 The dns_db_findrdataset function in db.c in named in ISC BIND 9.4 before 9.4.3-P3, 9.5 before 9.5.1-P3, and 9.6 before 9.6.1-P1, when configured as a master server, allows remote attackers to cause a denial of service (assertion failure and daemon exit) via an ANY record in the prerequisite section of a crafted dynamic update message, as exploited in the wild in July 2009.
CVE-2008-6225 ** DISPUTED ** SQL injection vulnerability in info.php in Mole Group Airline Ticket Sale Script allows remote attackers to execute arbitrary SQL commands via the flight parameter. NOTE: the vendor has disputed this issue, stating "crazy hackers and so named Security companies [spread] out such false informations. Such scripts or versions [do not] exist."
CVE-2008-5133 ipnat in IP Filter in Sun Solaris 10 and OpenSolaris before snv_96, when running on a DNS server with Network Address Translation (NAT) configured, improperly changes the source port of a packet when the destination port is the DNS port, which allows remote attackers to bypass an intended CVE-2008-1447 protection mechanism and spoof the responses to DNS queries sent by named.
CVE-2008-4114 srv.sys in the Server service in Microsoft Windows 2000 SP4, XP SP2 and SP3, Server 2003 SP1 and SP2, Vista Gold and SP1, and Server 2008 allows remote attackers to cause a denial of service (system crash) or possibly have unspecified other impact via an SMB WRITE_ANDX packet with an offset that is inconsistent with the packet size, related to "insufficiently validating the buffer size," as demonstrated by a request to the \PIPE\lsarpc named pipe, aka "SMB Validation Denial of Service Vulnerability."
CVE-2008-2666 Multiple directory traversal vulnerabilities in PHP 5.2.6 and earlier allow context-dependent attackers to bypass safe_mode restrictions by creating a subdirectory named http: and then placing ../ (dot dot slash) sequences in an http URL argument to the (1) chdir or (2) ftok function.
CVE-2008-1362 VMware Workstation 6.0.x before 6.0.3 and 5.5.x before 5.5.6, VMware Player 2.0.x before 2.0.3 and 1.0.x before 1.0.6, VMware ACE 2.0.x before 2.0.1 and 1.0.x before 1.0.5, and VMware Server 1.0.x before 1.0.5 on Windows allow local users to gain privileges or cause a denial of service by impersonating the authd process through an unspecified use of an "insecurely created named pipe," a different vulnerability than CVE-2008-1361.
CVE-2008-1361 VMware Workstation 6.0.x before 6.0.3 and 5.5.x before 5.5.6, VMware Player 2.0.x before 2.0.3 and 1.0.x before 1.0.6, VMware ACE 2.0.x before 2.0.1 and 1.0.x before 1.0.5, and VMware Server 1.0.x before 1.0.5 on Windows allow local users to gain privileges via an unspecified manipulation that causes the authd process to connect to an arbitrary named pipe, a different vulnerability than CVE-2008-1362.
CVE-2008-1311 The TFTP server in PacketTrap pt360 Tool Suite PRO 2.0.3901.0 and earlier allows remote attackers to cause a denial of service (daemon hang) by uploading a file named (1) '|' (pipe), (2) '"' (quotation mark), or (3) "<>" (less than, greater than); or (4) a file with a long name. NOTE: the issue for vector 4 might exist because of an incomplete fix for CVE-2008-1312.
CVE-2007-6495 inc_newuser.asp in Hosting Controller 6.1 Hot fix 3.3 and earlier allows remote authenticated users to change the permissions of directories named (1) db, (2) www, (3) Special, and (4) log at arbitrary locations under the web root via a modified Dirroot parameter in an AddUser action to accounts/AccountActions.asp. NOTE: this can be leveraged for remote code execution by changing the permissions of \Forum\db, which is configured for execution of ASP scripts with administrative privileges, and then uploading a script to \Forum\db.
CVE-2007-6283 Red Hat Enterprise Linux 5 and Fedora install the Bind /etc/rndc.key file with world-readable permissions, which allows local users to perform unauthorized named commands, such as causing a denial of service by stopping named.
CVE-2007-5661 The Macrovision InstallShield InstallScript One-Click Install (OCI) ActiveX control 12.0 before SP2 does not validate the DLL files that are named as parameters to the control, which allows remote attackers to download arbitrary library code onto a client machine.
CVE-2007-5471 libgssapi before 0.6-13.7, as used by the ISC BIND named daemon in SUSE Linux Enterprise Server 10 SP 1, terminates upon an initialization error, which allows remote attackers to cause a denial of service (daemon exit) via a GSS-TSIG request. NOTE: this issue probably affects other daemons that attempt to initialize this library within a chroot configuration or other invalid configuration.
CVE-2007-5225 Integer signedness error in FIFO filesystems (named pipes) on Sun Solaris 8 through 10 allows local users to read the contents of unspecified memory locations via a negative maximum length value to the I_PEEK ioctl.
CVE-2007-1330 Comodo Firewall Pro (CFP) (formerly Comodo Personal Firewall) 2.4.18.184 and earlier allows local users to bypass driver protections on the HKLM\SYSTEM\Software\Comodo\Personal Firewall registry key by guessing the name of a named pipe under \Device\NamedPipe\OLE and attempting to open it multiple times.
CVE-2007-0944 Unspecified vulnerability in the CTableCol::OnPropertyChange method in Microsoft Internet Explorer 5.01 SP4 on Windows 2000 SP4; 6 SP1 on Windows 2000 SP4; and 6 on Windows XP SP2, or Windows Server 2003 SP1 or SP2 allows remote attackers to execute arbitrary code by calling deleteCell on a named table row in a named table column, then accessing the column, which causes Internet Explorer to access previously deleted objects, aka the "Uninitialized Memory Corruption Vulnerability."
CVE-2007-0603 PGP Desktop before 9.5.1 does not validate data objects received over the (1) \pipe\pgpserv named pipe for PGPServ.exe or the (2) \pipe\pgpsdkserv named pipe for PGPsdkServ.exe, which allows remote authenticated users to gain privileges by sending a data object representing an absolute pointer, which causes code execution at the corresponding address.
CVE-2007-0493 Use-after-free vulnerability in ISC BIND 9.3.0 up to 9.3.3, 9.4.0a1 up to 9.4.0a6, 9.4.0b1 up to 9.4.0b4, 9.4.0rc1, and 9.5.0a1 (Bind Forum only) allows remote attackers to cause a denial of service (named daemon crash) via unspecified vectors that cause named to "dereference a freed fetch context."
CVE-2007-0215 Stack-based buffer overflow in Microsoft Excel 2000 SP3, 2002 SP3, 2003 SP2, and 2003 Viewer allows user-assisted remote attackers to execute arbitrary code via a .XLS BIFF file with a malformed Named Graph record, which results in memory corruption.
CVE-2007-0045 Multiple cross-site scripting (XSS) vulnerabilities in Adobe Acrobat Reader Plugin before 8.0.0, and possibly the plugin distributed with Adobe Reader 7.x before 7.1.4, 8.x before 8.1.7, and 9.x before 9.2, for Mozilla Firefox, Microsoft Internet Explorer 6 SP1, Google Chrome, Opera 8.5.4 build 770, and Opera 9.10.8679 on Windows allow remote attackers to inject arbitrary JavaScript and conduct other attacks via a .pdf URL with a javascript: or res: URI with (1) FDF, (2) XML, and (3) XFDF AJAX parameters, or (4) an arbitrarily named name=URI anchor identifier, aka "Universal XSS (UXSS)."
CVE-2006-7227 Integer overflow in Perl-Compatible Regular Expression (PCRE) library before 6.7 allows context-dependent attackers to execute arbitrary code via a regular expression containing a large number of named subpatterns (name_count) or long subpattern names (max_name_size), which triggers a buffer overflow. NOTE: this issue was originally subsumed by CVE-2006-7224, but that CVE has been REJECTED and split.
CVE-2006-7226 Perl-Compatible Regular Expression (PCRE) library before 6.7 does not properly calculate the compiled memory allocation for regular expressions that involve a quantified "subpattern containing a named recursion or subroutine reference," which allows context-dependent attackers to cause a denial of service (error or crash).
CVE-2006-5784 Unspecified vulnerability in enserver.exe in SAP Web Application Server 6.40 before patch 136 and 7.00 before patch 66 allows remote attackers to read arbitrary files via crafted data on a "3200+SYSNR" TCP port, as demonstrated by port 3201. NOTE: this issue can be leveraged by local users to access a named pipe as the SAPServiceJ2E user.
CVE-2006-5003 Unspecified vulnerability in the named8 command in IBM AIX 5.2.0 and 5.3.0 allows local users to execute arbitrary commands via unspecified vectors.
CVE-2006-3807 Mozilla Firefox before 1.5.0.5, Thunderbird before 1.5.0.5, and SeaMonkey before 1.0.3 allows remote attackers to execute arbitrary code via script that changes the standard Object() constructor to return a reference to a privileged object and calling "named JavaScript functions" that use the constructor.
CVE-2006-2334 The RtlDosPathNameToNtPathName_U API function in NTDLL.DLL in Microsoft Windows 2000 SP4 and XP SP2 does not properly convert DOS style paths with trailing spaces into NT style paths, which allows context-dependent attackers to create files that cannot be accessed through the expected DOS path or prevent access to other similarly named files in the same directory, which prevents those files from being detected or disinfected by certain anti-virus and anti-spyware software.
CVE-2006-1642 Cross-site scripting (XSS) vulnerability in Interact 2.1.1 allows remote attackers to inject arbitrary web script or HTML via (1) the search_terms parameter to (a) search.php, and (2) the first_name, (3) last_name, (4) email, (5) password, and (6) confirm_password parameters to (b) userinput.php. NOTE: the provenance of this information is unknown; the details are obtained from third party. In addition, the lack of precision in the third party descriptions makes it unclear whether the named vectors are correct.
CVE-2006-1623 Unspecified vulnerability in main.php in an unspecified "file created by Andries Bruinsma," possibly a FleXiBle Development (FXB) application, allows remote attackers to include and execute arbitrary PHP code. NOTE: this disclosure is extremely vague and has very little information about the specific vulnerability type. In addition, there is little public information on the named product. Finally, an XSS vector is implied in the subject line, but because there is no other information and evidence of a cut-and-paste error, it will not be assigned a separate CVE identifier unless additional information is provided.
CVE-2006-1476 Windows Firewall in Microsoft Windows XP SP2 produces incorrect application block alerts when the application filename is ".exe" (with no characters before the "."), which might allow local user-assisted users to trick a user into unblocking a Trojan horse program, as demonstrated by a malicious ".exe" program in a folder named "Internet Explorer," which triggers a question about whether to unblock the "Internet Explorer" program.
CVE-2006-1063 Unspecified vulnerability in Lurker 2.0 and earlier allows remote attackers to create or overwrite files in any writable directory that is named "mbox".
CVE-2006-0097 Stack-based buffer overflow in the create_named_pipe function in libmysql.c in PHP 4.3.10 and 4.4.x before 4.4.3 for Windows allows attackers to execute arbitrary code via a long (1) arg_host or (2) arg_unix_socket argument, as demonstrated by a long named pipe variable in the host argument to the mysql_connect function.
CVE-2005-4872 Perl-Compatible Regular Expression (PCRE) library before 6.2 does not properly count the number of named capturing subpatterns, which allows context-dependent attackers to cause a denial of service (crash) via a regular expression with a large number of named subpatterns, which triggers a buffer overflow. NOTE: this issue was originally subsumed by CVE-2006-7224, but that CVE has been REJECTED and split.
CVE-2005-4131 Unspecified vulnerability in Microsoft Excel 2000, 2002, and 2003, in Microsoft Office 2000 SP3 and other packages, allows user-assisted attackers to execute arbitrary code via an Excel file with a malformed range, which could lead to memory corruption involving an argument to the msvcrt.memmove function, aka "Brand new Microsoft Excel Vulnerability," as originally placed for sale on eBay as item number 7203336538.
CVE-2005-3781 Unspecified vulnerability in in.named in Solaris 9 allows attackers to cause a denial of service via unknown manipulations that cause in.named to "make unnecessary queries."
CVE-2005-2150 Windows NT 4.0 and Windows 2000 before URP1 for Windows 2000 SP4 does not properly prevent NULL sessions from accessing certain alternate named pipes, which allows remote attackers to (1) list Windows services via svcctl or (2) read eventlogs via eventlog.
CVE-2005-0051 The Server service (srvsvc.dll) in Windows XP SP1 and SP2 allows remote attackers to obtain sensitive information (users who are accessing resources) via an anonymous logon using a named pipe, which is not properly authenticated, aka the "Named Pipe Vulnerability."
CVE-2005-0034 An "incorrect assumption" in the authvalidated validator function in BIND 9.3.0, when DNSSEC is enabled, allows remote attackers to cause a denial of service (named server exit) via crafted DNS packets that cause an internal consistency test (self-check) to fail.
CVE-2004-1348 Unknown vulnerability in in.named on Solaris 8 allows remote attackers to cause a denial of service (process crash).
CVE-2004-0795 DB2 8.1 remote command server (DB2RCMD.EXE) executes the db2rcmdc.exe program as the db2admin administrator, which allows local users to gain privileges via the DB2REMOTECMD named pipe.
CVE-2003-1537 Directory traversal vulnerability in PostNuke 0.723 and earlier allows remote attackers to include arbitrary files named theme.php via the theme parameter to index.php.
CVE-2003-0496 Microsoft SQL Server before Windows 2000 SP4 allows local users to gain privileges as the SQL Server user by calling the xp_fileexist extended stored procedure with a named pipe as an argument instead of a normal file.
CVE-2003-0231 Microsoft SQL Server 7, 2000, and MSDE allows local or remote authenticated users to cause a denial of service (crash or hang) via a long request to a named pipe.
CVE-2003-0230 Microsoft SQL Server 7, 2000, and MSDE allows local users to gain privileges by hijacking a named pipe during the authentication of another user, aka the "Named Pipe Hijacking" vulnerability.
CVE-2002-1219 Buffer overflow in named in BIND 4 versions 4.9.10 and earlier, and 8 versions 8.3.3 and earlier, allows remote attackers to execute arbitrary code via a certain DNS server response containing SIG resource records (RR).
CVE-2002-0066 Funk Software Proxy Host 3.x before 3.09A creates a Named Pipe that does not require authentication and is installed with insecure access control, which allows local and possibly remote users to use the Proxy Host's configuration utilities and gain privileges.
CVE-2001-1519 ** DISPUTED ** RunAs (runas.exe) in Windows 2000 allows local users to create a spoofed named pipe when the service is stopped, then capture cleartext usernames and passwords when clients connect to the service. NOTE: the vendor disputes this issue, saying that administrative privileges are already required to exploit it.
CVE-2001-1518 RunAs (runas.exe) in Windows 2000 only creates one session instance at a time, which allows local users to cause a denial of service (RunAs hang) by creating a named pipe session with the authentication server without any request for service. NOTE: the vendor disputes this vulnerability, however the vendor also presents a scenario in which other users could be affected if running on a Terminal Server. Therefore this is a vulnerability.
CVE-2001-1446 Find-By-Content in Mac OS X 10.0 through 10.0.4 creates world-readable index files named .FBCIndex in every directory, which allows remote attackers to learn the contents of files in web accessible directories.
CVE-2001-1347 Windows 2000 allows local users to cause a denial of service and possibly gain privileges by setting a hardware breakpoint that is handled using global debug registers, which could cause other processes to terminate due to an exception, and allow hijacking of resources such as named pipes.
CVE-2001-1238 Task Manager in Windows 2000 does not allow local users to end processes with uppercase letters named (1) winlogon.exe, (2) csrss.exe, (3) smss.exe and (4) services.exe via the Process tab which could allow local users to install Trojan horses that cannot be stopped with the Task Manager.
CVE-2001-0959 Computer Associates ARCserve for NT 6.61 SP2a and ARCserve 2000 7.0 creates a hidden share named ARCSERVE$, which allows remote attackers to obtain sensitive information and overwrite critical files.
CVE-2001-0573 lsfs in AIX 4.x allows a local user to gain additional privileges by creating Trojan horse programs named (1) grep or (2) lslv in a certain directory that is under the user's control, which cause lsfs to access the programs in that directory.
CVE-2001-0529 OpenSSH version 2.9 and earlier, with X forwarding enabled, allows a local attacker to delete any file named 'cookies' via a symlink attack.
CVE-2001-0350 Microsoft Windows 2000 telnet service creates named pipes with predictable names and does not properly verify them, which allows local users to execute arbitrary commands by creating a named pipe with the predictable name and associating a malicious program with it, the second of two variants of this vulnerability.
CVE-2001-0349 Microsoft Windows 2000 telnet service creates named pipes with predictable names and does not properly verify them, which allows local users to execute arbitrary commands by creating a named pipe with the predictable name and associating a malicious program with it, the first of two variants of this vulnerability.
CVE-2001-0137 Windows Media Player 7 allows remote attackers to execute malicious Java applets in Internet Explorer clients by enclosing the applet in a skin file named skin.wmz, then referencing that skin in the codebase parameter to an applet tag, aka the Windows Media Player Skins File Download" vulnerability.
CVE-2000-0958 HotJava Browser 3.0 allows remote attackers to access the DOM of a web page by opening a javascript: URL in a named window.
CVE-2000-0888 named in BIND 8.2 through 8.2.2-P6 allows remote attackers to cause a denial of service by sending an SRV record to the server, aka the "srv bug."
CVE-2000-0887 named in BIND 8.2 through 8.2.2-P6 allows remote attackers to cause a denial of service by making a compressed zone transfer (ZXFR) request and performing a name service query on an authoritative record that is not cached, aka the "zxfr bug."
CVE-2000-0737 The Service Control Manager (SCM) in Windows 2000 creates predictable named pipes, which allows a local user with console access to gain administrator privileges, aka the "Service Control Manager Named Pipe Impersonation" vulnerability.
CVE-2000-0663 The registry entry for the Windows Shell executable (Explorer.exe) in Windows NT and Windows 2000 uses a relative path name, which allows local users to execute arbitrary commands by inserting a Trojan Horse named Explorer.exe into the %Systemdrive% directory, aka the "Relative Shell Path" vulnerability.
CVE-1999-1499 named in ISC BIND 4.9 and 8.1 allows local users to destroy files via a symlink attack on (1) named_dump.db when root kills the process with a SIGINT, or (2) named.stats when SIGIOT is used.
CVE-1999-1127 Windows NT 4.0 does not properly shut down invalid named pipe RPC connections, which allows remote attackers to cause a denial of service (resource exhaustion) via a series of connections containing malformed data, aka the "Named Pipes Over RPC" vulnerability.
CVE-1999-1013 named-xfer in AIX 4.1.5 and 4.2.1 allows members of the system group to overwrite system files to gain root access via the -f parameter and a malformed zone file.
CVE-1999-0851 Denial of service in BIND named via naptr.
CVE-1999-0849 Denial of service in BIND named via maxdname.
CVE-1999-0848 Denial of service in BIND named via consuming more than "fdmax" file descriptors.
CVE-1999-0835 Denial of service in BIND named via malformed SIG records.
  
You can also search by reference using the CVE Reference Maps.
For More Information:  CVE Request Web Form (select “Other” from dropdown)