Search Results

There are 61 CVE Records that match your search.
Name Description
CVE-2025-1118 A flaw was found in grub2. Grub's dump command is not blocked when grub is in lockdown mode, which allows the user to read any memory information, and an attacker may leverage this in order to extract signatures, salts, and other sensitive information from the memory.
CVE-2025-0686 A flaw was found in grub2. When performing a symlink lookup from a romfs filesystem, grub's romfs filesystem module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciously crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the grub_romfs_read_symlink() may cause out-of-bounds writes when the calling grub_disk_read() function. This issue may be leveraged to corrupt grub's internal critical data and can result in arbitrary code execution by-passing secure boot protections.
CVE-2025-0685 A flaw was found in grub2. When reading data from a jfs filesystem, grub's jfs filesystem module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the grub_jfs_lookup_symlink() function will write past the internal buffer length during grub_jfs_read_file(). This issue can be leveraged to corrupt grub's internal critical data and may result in arbitrary code execution, by-passing secure boot protections.
CVE-2025-0684 A flaw was found in grub2. When performing a symlink lookup from a reiserfs filesystem, grub's reiserfs fs module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the grub_reiserfs_read_symlink() will call grub_reiserfs_read_real() with a overflown length parameter, leading to a heap based out-of-bounds write during data reading. This flaw may be leveraged to corrupt grub's internal critical data and can result in arbitrary code execution, by-passing secure boot protections.
CVE-2025-0678 A flaw was found in grub2. When reading data from a squash4 filesystem, grub's squash4 fs module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciously crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the direct_read() will perform a heap based out-of-bounds write during data reading. This flaw may be leveraged to corrupt grub's internal critical data and may result in arbitrary code execution, by-passing secure boot protections.
CVE-2025-0677 A flaw was found in grub2. When performing a symlink lookup, the grub's UFS module checks the inode's data size to allocate the internal buffer to read the file content, however, it fails to check if the symlink data size has overflown. When this occurs, grub_malloc() may be called with a smaller value than needed. When further reading the data from the disk into the buffer, the grub_ufs_lookup_symlink() function will write past the end of the allocated size. An attack can leverage this by crafting a malicious filesystem, and as a result, it will corrupt data stored in the heap, allowing for arbitrary code execution used to by-pass secure boot mechanisms.
CVE-2025-0624 A flaw was found in grub2. During the network boot process, when trying to search for the configuration file, grub copies data from a user controlled environment variable into an internal buffer using the grub_strcpy() function. During this step, it fails to consider the environment variable length when allocating the internal buffer, resulting in an out-of-bounds write. If correctly exploited, this issue may result in remote code execution through the same network segment grub is searching for the boot information, which can be used to by-pass secure boot protections.
CVE-2025-0622 A flaw was found in command/gpg. In some scenarios, hooks created by loaded modules are not removed when the related module is unloaded. This flaw allows an attacker to force grub2 to call the hooks once the module that registered it was unloaded, leading to a use-after-free vulnerability. If correctly exploited, this vulnerability may result in arbitrary code execution, eventually allowing the attacker to bypass secure boot protections.
CVE-2024-56738 GNU GRUB (aka GRUB2) through 2.12 does not use a constant-time algorithm for grub_crypto_memcmp and thus allows side-channel attacks.
CVE-2024-56737 GNU GRUB (aka GRUB2) through 2.12 has a heap-based buffer overflow in fs/hfs.c via crafted sblock data in an HFS filesystem.
CVE-2024-49504 grub2 allowed attackers with access to the grub shell to access files on the encrypted disks.
CVE-2024-45783 A flaw was found in grub2. When failing to mount an HFS+ grub, the hfsplus filesystem driver doesn't properly set an ERRNO value. This issue may lead to a NULL pointer access.
CVE-2024-45781 A flaw was found in grub2. When reading a symbolic link's name from a UFS filesystem, grub2 fails to validate the string length taken as an input. The lack of validation may lead to a heap out-of-bounds write, causing data integrity issues and eventually allowing an attacker to circumvent secure boot protections.
CVE-2024-45780 A flaw was found in grub2. When reading tar files, grub2 allocates an internal buffer for the file name. However, it fails to properly verify the allocation against possible integer overflows. It's possible to cause the allocation length to overflow with a crafted tar file, leading to a heap out-of-bounds write. This flaw eventually allows an attacker to circumvent secure boot protections.
CVE-2024-45779 An integer overflow flaw was found in the BFS file system driver in grub2. When reading a file with an indirect extent map, grub2 fails to validate the number of extent entries to be read. A crafted or corrupted BFS filesystem may cause an integer overflow during the file reading, leading to a heap of bounds read. As a consequence, sensitive data may be leaked, or grub2 will crash.
CVE-2024-45778 A stack overflow flaw was found when reading a BFS file system. A crafted BFS filesystem may lead to an uncontrolled loop, causing grub2 to crash.
CVE-2024-45777 A flaw was found in grub2. The calculation of the translation buffer when reading a language .mo file in grub_gettext_getstr_from_position() may overflow, leading to a Out-of-bound write. This issue can be leveraged by an attacker to overwrite grub2's sensitive heap data, eventually leading to the circumvention of secure boot protections.
CVE-2024-45776 When reading the language .mo file in grub_mofile_open(), grub2 fails to verify an integer overflow when allocating its internal buffer. A crafted .mo file may lead the buffer size calculation to overflow, leading to out-of-bound reads and writes. This flaw allows an attacker to leak sensitive data or overwrite critical data, possibly circumventing secure boot protections.
CVE-2024-45775 A flaw was found in grub2 where the grub_extcmd_dispatcher() function calls grub_arg_list_alloc() to allocate memory for the grub's argument list. However, it fails to check in case the memory allocation fails. Once the allocation fails, a NULL point will be processed by the parse_option() function, leading grub to crash or, in some rare scenarios, corrupt the IVT data.
CVE-2024-45774 A flaw was found in grub2. A specially crafted JPEG file can cause the JPEG parser of grub2 to incorrectly check the bounds of its internal buffers, resulting in an out-of-bounds write. The possibility of overwriting sensitive information to bypass secure boot protections is not discarded.
CVE-2024-2312 GRUB2 does not call the module fini functions on exit, leading to Debian/Ubuntu's peimage GRUB2 module leaving UEFI system table hooks after exit. This lead to a use-after-free condition, and could possibly lead to secure boot bypass.
CVE-2024-1048 A flaw was found in the grub2-set-bootflag utility of grub2. After the fix of CVE-2019-14865, grub2-set-bootflag will create a temporary file with the new grubenv content and rename it to the original grubenv file. If the program is killed before the rename operation, the temporary file will not be removed and may fill the filesystem when invoked multiple times, resulting in a filesystem out of free inodes or blocks.
CVE-2023-4693 An out-of-bounds read flaw was found on grub2's NTFS filesystem driver. This issue may allow a physically present attacker to present a specially crafted NTFS file system image to read arbitrary memory locations. A successful attack allows sensitive data cached in memory or EFI variable values to be leaked, presenting a high Confidentiality risk.
CVE-2023-4692 An out-of-bounds write flaw was found in grub2's NTFS filesystem driver. This issue may allow an attacker to present a specially crafted NTFS filesystem image, leading to grub's heap metadata corruption. In some circumstances, the attack may also corrupt the UEFI firmware heap metadata. As a result, arbitrary code execution and secure boot protection bypass may be achieved.
CVE-2023-4001 An authentication bypass flaw was found in GRUB due to the way that GRUB uses the UUID of a device to search for the configuration file that contains the password hash for the GRUB password protection feature. An attacker capable of attaching an external drive such as a USB stick containing a file system with a duplicate UUID (the same as in the "/boot/" file system) can bypass the GRUB password protection feature on UEFI systems, which enumerate removable drives before non-removable ones. This issue was introduced in a downstream patch in Red Hat's version of grub2 and does not affect the upstream package.
CVE-2022-3775 When rendering certain unicode sequences, grub2's font code doesn't proper validate if the informed glyph's width and height is constrained within bitmap size. As consequence an attacker can craft an input which will lead to a out-of-bounds write into grub2's heap, leading to memory corruption and availability issues. Although complex, arbitrary code execution could not be discarded.
CVE-2022-28736 There's a use-after-free vulnerability in grub_cmd_chainloader() function; The chainloader command is used to boot up operating systems that doesn't support multiboot and do not have direct support from GRUB2. When executing chainloader more than once a use-after-free vulnerability is triggered. If an attacker can control the GRUB2's memory allocation pattern sensitive data may be exposed and arbitrary code execution can be achieved.
CVE-2022-28735 The GRUB2's shim_lock verifier allows non-kernel files to be loaded on shim-powered secure boot systems. Allowing such files to be loaded may lead to unverified code and modules to be loaded in GRUB2 breaking the secure boot trust-chain.
CVE-2022-28734 Out-of-bounds write when handling split HTTP headers; When handling split HTTP headers, GRUB2 HTTP code accidentally moves its internal data buffer point by one position. This can lead to a out-of-bound write further when parsing the HTTP request, writing a NULL byte past the buffer. It's conceivable that an attacker controlled set of packets can lead to corruption of the GRUB2's internal memory metadata.
CVE-2021-46705 A Insecure Temporary File vulnerability in grub-once of grub2 in SUSE Linux Enterprise Server 15 SP4, openSUSE Factory allows local attackers to truncate arbitrary files. This issue affects: SUSE Linux Enterprise Server 15 SP4 grub2 versions prior to 2.06-150400.7.1. SUSE openSUSE Factory grub2 versions prior to 2.06-18.1.
CVE-2021-3981 A flaw in grub2 was found where its configuration file, known as grub.cfg, is being created with the wrong permission set allowing non privileged users to read its content. This represents a low severity confidentiality issue, as those users can eventually read any encrypted passwords present in grub.cfg. This flaw affects grub2 2.06 and previous versions. This issue has been fixed in grub upstream but no version with the fix is currently released.
CVE-2021-3697 A crafted JPEG image may lead the JPEG reader to underflow its data pointer, allowing user-controlled data to be written in heap. To a successful to be performed the attacker needs to perform some triage over the heap layout and craft an image with a malicious format and payload. This vulnerability can lead to data corruption and eventual code execution or secure boot circumvention. This flaw affects grub2 versions prior grub-2.12.
CVE-2021-3696 A heap out-of-bounds write may heppen during the handling of Huffman tables in the PNG reader. This may lead to data corruption in the heap space. Confidentiality, Integrity and Availablity impact may be considered Low as it's very complex to an attacker control the encoding and positioning of corrupted Huffman entries to achieve results such as arbitrary code execution and/or secure boot circumvention. This flaw affects grub2 versions prior grub-2.12.
CVE-2021-3695 A crafted 16-bit grayscale PNG image may lead to a out-of-bounds write in the heap area. An attacker may take advantage of that to cause heap data corruption or eventually arbitrary code execution and circumvent secure boot protections. This issue has a high complexity to be exploited as an attacker needs to perform some triage over the heap layout to achieve signifcant results, also the values written into the memory are repeated three times in a row making difficult to produce valid payloads. This flaw affects grub2 versions prior grub-2.12.
CVE-2021-3418 If certificates that signed grub are installed into db, grub can be booted directly. It will then boot any kernel without signature validation. The booted kernel will think it was booted in secureboot mode and will implement lockdown, yet it could have been tampered. This flaw is a reintroduction of CVE-2020-15705 and only affects grub2 versions prior to 2.06 and upstream and distributions using the shim_lock mechanism.
CVE-2021-20233 A flaw was found in grub2 in versions prior to 2.06. Setparam_prefix() in the menu rendering code performs a length calculation on the assumption that expressing a quoted single quote will require 3 characters, while it actually requires 4 characters which allows an attacker to corrupt memory by one byte for each quote in the input. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
CVE-2021-20225 A flaw was found in grub2 in versions prior to 2.06. The option parser allows an attacker to write past the end of a heap-allocated buffer by calling certain commands with a large number of specific short forms of options. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
CVE-2020-7205 A potential security vulnerability has been identified in HPE Intelligent Provisioning, Service Pack for ProLiant, and HPE Scripting ToolKit. The vulnerability could be locally exploited to allow arbitrary code execution during the boot process. **Note:** This vulnerability is related to using insmod in GRUB2 in the specific impacted HPE product and HPE is addressing this issue. HPE has made the following software updates and mitigation information to resolve the vulnerability in Intelligent Provisioning, Service Pack for ProLiant, and HPE Scripting ToolKit. HPE provided latest Intelligent Provisioning, Service Pack for ProLiant, and HPE Scripting Toolkit which includes the GRUB2 patch to resolve this vulnerability. These new boot images will update GRUB2 and the Forbidden Signature Database (DBX). After the DBX is updated, users will not be able to boot to the older IP, SPP or Scripting ToolKit with Secure Boot enabled. HPE have provided a standalone DBX update tool to work with Microsoft Windows, and supported Linux Operating Systems. These tools can be used to update the Forbidden Signature Database (DBX) from within the OS. **Note:** This DBX update mitigates the GRUB2 issue with insmod enabled, and the "Boot Hole" issue for HPE signed GRUB2 applications.
CVE-2020-27779 A flaw was found in grub2 in versions prior to 2.06. The cutmem command does not honor secure boot locking allowing an privileged attacker to remove address ranges from memory creating an opportunity to circumvent SecureBoot protections after proper triage about grub's memory layout. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
CVE-2020-27749 A flaw was found in grub2 in versions prior to 2.06. Variable names present are expanded in the supplied command line into their corresponding variable contents, using a 1kB stack buffer for temporary storage, without sufficient bounds checking. If the function is called with a command line that references a variable with a sufficiently large payload, it is possible to overflow the stack buffer, corrupt the stack frame and control execution which could also circumvent Secure Boot protections. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
CVE-2020-25647 A flaw was found in grub2 in versions prior to 2.06. During USB device initialization, descriptors are read with very little bounds checking and assumes the USB device is providing sane values. If properly exploited, an attacker could trigger memory corruption leading to arbitrary code execution allowing a bypass of the Secure Boot mechanism. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
CVE-2020-25632 A flaw was found in grub2 in versions prior to 2.06. The rmmod implementation allows the unloading of a module used as a dependency without checking if any other dependent module is still loaded leading to a use-after-free scenario. This could allow arbitrary code to be executed or a bypass of Secure Boot protections. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
CVE-2020-24637 Two vulnerabilities in ArubaOS GRUB2 implementation allows for an attacker to bypass secureboot. Successful exploitation of this vulnerability this could lead to remote compromise of system integrity by allowing an attacker to load an untrusted or modified kernel in Aruba 9000 Gateway; Aruba 7000 Series Mobility Controllers; Aruba 7200 Series Mobility Controllers version(s): 2.1.0.1, 2.2.0.0 and below; 6.4.4.23, 6.5.4.17, 8.2.2.9, 8.3.0.13, 8.5.0.10, 8.6.0.5, 8.7.0.0 and below ; 6.4.4.23, 6.5.4.17, 8.2.2.9, 8.3.0.13, 8.5.0.10, 8.6.0.5, 8.7.0.0 and below.
CVE-2020-15780 An issue was discovered in drivers/acpi/acpi_configfs.c in the Linux kernel before 5.7.7. Injection of malicious ACPI tables via configfs could be used by attackers to bypass lockdown and secure boot restrictions, aka CID-75b0cea7bf30.
CVE-2020-15707 Integer overflows were discovered in the functions grub_cmd_initrd and grub_initrd_init in the efilinux component of GRUB2, as shipped in Debian, Red Hat, and Ubuntu (the functionality is not included in GRUB2 upstream), leading to a heap-based buffer overflow. These could be triggered by an extremely large number of arguments to the initrd command on 32-bit architectures, or a crafted filesystem with very large files on any architecture. An attacker could use this to execute arbitrary code and bypass UEFI Secure Boot restrictions. This issue affects GRUB2 version 2.04 and prior versions.
CVE-2020-15706 GRUB2 contains a race condition in grub_script_function_create() leading to a use-after-free vulnerability which can be triggered by redefining a function whilst the same function is already executing, leading to arbitrary code execution and secure boot restriction bypass. This issue affects GRUB2 version 2.04 and prior versions.
CVE-2020-15705 GRUB2 fails to validate kernel signature when booted directly without shim, allowing secure boot to be bypassed. This only affects systems where the kernel signing certificate has been imported directly into the secure boot database and the GRUB image is booted directly without the use of shim. This issue affects GRUB2 version 2.04 and prior versions.
CVE-2020-14372 A flaw was found in grub2 in versions prior to 2.06, where it incorrectly enables the usage of the ACPI command when Secure Boot is enabled. This flaw allows an attacker with privileged access to craft a Secondary System Description Table (SSDT) containing code to overwrite the Linux kernel lockdown variable content directly into memory. The table is further loaded and executed by the kernel, defeating its Secure Boot lockdown and allowing the attacker to load unsigned code. The highest threat from this vulnerability is to data confidentiality and integrity, as well as system availability.
CVE-2020-14311 There is an issue with grub2 before version 2.06 while handling symlink on ext filesystems. A filesystem containing a symbolic link with an inode size of UINT32_MAX causes an arithmetic overflow leading to a zero-sized memory allocation with subsequent heap-based buffer overflow.
CVE-2020-14310 There is an issue on grub2 before version 2.06 at function read_section_as_string(). It expects a font name to be at max UINT32_MAX - 1 length in bytes but it doesn't verify it before proceed with buffer allocation to read the value from the font value. An attacker may leverage that by crafting a malicious font file which has a name with UINT32_MAX, leading to read_section_as_string() to an arithmetic overflow, zero-sized allocation and further heap-based buffer overflow.
CVE-2020-14309 There's an issue with grub2 in all versions before 2.06 when handling squashfs filesystems containing a symbolic link with name length of UINT32 bytes in size. The name size leads to an arithmetic overflow leading to a zero-size allocation further causing a heap-based buffer overflow with attacker controlled data.
CVE-2020-14308 In grub2 versions before 2.06 the grub memory allocator doesn't check for possible arithmetic overflows on the requested allocation size. This leads the function to return invalid memory allocations which can be further used to cause possible integrity, confidentiality and availability impacts during the boot process.
CVE-2020-10713 A flaw was found in grub2, prior to version 2.06. An attacker may use the GRUB 2 flaw to hijack and tamper the GRUB verification process. This flaw also allows the bypass of Secure Boot protections. In order to load an untrusted or modified kernel, an attacker would first need to establish access to the system such as gaining physical access, obtain the ability to alter a pxe-boot network, or have remote access to a networked system with root access. With this access, an attacker could then craft a string to cause a buffer overflow by injecting a malicious payload that leads to arbitrary code execution within GRUB. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
CVE-2020-10566 grub2-bhyve, as used in FreeBSD bhyve before revision 525916 2020-02-12, mishandles font loading by a guest through a grub2.cfg file, leading to a buffer overflow.
CVE-2020-10565 grub2-bhyve, as used in FreeBSD bhyve before revision 525916 2020-02-12, does not validate the address provided as part of a memrw command (read_* or write_*) by a guest through a grub2.cfg file. This allows an untrusted guest to perform arbitrary read or write operations in the context of the grub-bhyve process, resulting in code execution as root on the host OS.
CVE-2019-20908 An issue was discovered in drivers/firmware/efi/efi.c in the Linux kernel before 5.4. Incorrect access permissions for the efivar_ssdt ACPI variable could be used by attackers to bypass lockdown or secure boot restrictions, aka CID-1957a85b0032.
CVE-2019-14865 A flaw was found in the grub2-set-bootflag utility of grub2. A local attacker could run this utility under resource pressure (for example by setting RLIMIT), causing grub2 configuration files to be truncated and leaving the system unbootable on subsequent reboots.
CVE-2015-8370 Multiple integer underflows in Grub2 1.98 through 2.02 allow physically proximate attackers to bypass authentication, obtain sensitive information, or cause a denial of service (disk corruption) via backspace characters in the (1) grub_username_get function in grub-core/normal/auth.c or the (2) grub_password_get function in lib/crypto.c, which trigger an "Off-by-two" or "Out of bounds overwrite" memory error.
CVE-2015-5281 The grub2 package before 2.02-0.29 in Red Hat Enterprise Linux (RHEL) 7, when used on UEFI systems, allows local users to bypass intended Secure Boot restrictions and execute non-verified code via a crafted (1) multiboot or (2) multiboot2 module in the configuration file or physically proximate attackers to bypass intended Secure Boot restrictions and execute non-verified code via the (3) boot menu.
CVE-2012-2314 The bootloader configuration module (pyanaconda/bootloader.py) in Anaconda uses 755 permissions for /etc/grub.d, which allows local users to obtain password hashes and conduct brute force password guessing attacks.
CVE-2009-4128 GNU GRand Unified Bootloader (GRUB) 2 1.97 only compares the submitted portion of a password with the actual password, which makes it easier for physically proximate attackers to conduct brute force attacks and bypass authentication by submitting a password whose length is 1.
  
You can also search by reference using the CVE Reference Maps.
For More Information:  CVE Request Web Form (select “Other” from dropdown)