Search Results
There are 88 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2024-32475 | Envoy is a cloud-native, open source edge and service proxy. When an upstream TLS cluster is used with `auto_sni` enabled, a request containing a `host`/`:authority` header longer than 255 characters triggers an abnormal termination of Envoy process. Envoy does not gracefully handle an error when setting SNI for outbound TLS connection. The error can occur when Envoy attempts to use the `host`/`:authority` header value longer than 255 characters as SNI for outbound TLS connection. SNI length is limited to 255 characters per the standard. Envoy always expects this operation to succeed and abnormally aborts the process when it fails. This vulnerability is fixed in 1.30.1, 1.29.4, 1.28.3, and 1.27.5. |
| CVE-2024-30255 | Envoy is a cloud-native, open source edge and service proxy. The HTTP/2 protocol stack in Envoy versions prior to 1.29.3, 1.28.2, 1.27.4, and 1.26.8 are vulnerable to CPU exhaustion due to flood of CONTINUATION frames. Envoy's HTTP/2 codec allows the client to send an unlimited number of CONTINUATION frames even after exceeding Envoy's header map limits. This allows an attacker to send a sequence of CONTINUATION frames without the END_HEADERS bit set causing CPU utilization, consuming approximately 1 core per 300Mbit/s of traffic and culminating in denial of service through CPU exhaustion. Users should upgrade to version 1.29.3, 1.28.2, 1.27.4, or 1.26.8 to mitigate the effects of the CONTINUATION flood. As a workaround, disable HTTP/2 protocol for downstream connections. |
| CVE-2024-28250 | Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Starting in version 1.14.0 and prior to versions 1.14.8 and 1.15.2, In Cilium clusters with WireGuard enabled and traffic matching Layer 7 policies Wireguard-eligible traffic that is sent between a node's Envoy proxy and pods on other nodes is sent unencrypted and Wireguard-eligible traffic that is sent between a node's DNS proxy and pods on other nodes is sent unencrypted. This issue has been resolved in Cilium 1.14.8 and 1.15.2 in in native routing mode (`routingMode=native`) and in Cilium 1.14.4 in tunneling mode (`routingMode=tunnel`). Not that in tunneling mode, `encryption.wireguard.encapsulate` must be set to `true`. There is no known workaround for this issue. |
| CVE-2024-28249 | Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Prior to versions 1.13.13, 1.14.8, and 1.15.2, in Cilium clusters with IPsec enabled and traffic matching Layer 7 policies, IPsec-eligible traffic between a node's Envoy proxy and pods on other nodes is sent unencrypted and IPsec-eligible traffic between a node's DNS proxy and pods on other nodes is sent unencrypted. This issue has been resolved in Cilium 1.15.2, 1.14.8, and 1.13.13. There is no known workaround for this issue. |
| CVE-2024-27919 | Envoy is a cloud-native, open-source edge and service proxy. In versions 1.29.0 and 1.29.1, theEnvoy HTTP/2 protocol stack is vulnerable to the flood of CONTINUATION frames. Envoy's HTTP/2 codec does not reset a request when header map limits have been exceeded. This allows an attacker to send an sequence of CONTINUATION frames without the END_HEADERS bit set causing unlimited memory consumption. This can lead to denial of service through memory exhaustion. Users should upgrade to versions 1.29.2 to mitigate the effects of the CONTINUATION flood. Note that this vulnerability is a regression in Envoy version 1.29.0 and 1.29.1 only. As a workaround, downgrade to version 1.28.1 or earlier or disable HTTP/2 protocol for downstream connections. |
| CVE-2024-23327 | Envoy is a high-performance edge/middle/service proxy. When PPv2 is enabled both on a listener and subsequent cluster, the Envoy instance will segfault when attempting to craft the upstream PPv2 header. This occurs when the downstream request has a command type of LOCAL and does not have the protocol block. This issue has been addressed in releases 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2024-23325 | Envoy is a high-performance edge/middle/service proxy. Envoy crashes in Proxy protocol when using an address type that isn’t supported by the OS. Envoy is susceptible to crashing on a host with IPv6 disabled and a listener config with proxy protocol enabled when it receives a request where the client presents its IPv6 address. It is valid for a client to present its IPv6 address to a target server even though the whole chain is connected via IPv4. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2024-23324 | Envoy is a high-performance edge/middle/service proxy. External authentication can be bypassed by downstream connections. Downstream clients can force invalid gRPC requests to be sent to ext_authz, circumventing ext_authz checks when failure_mode_allow is set to true. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2024-23323 | Envoy is a high-performance edge/middle/service proxy. The regex expression is compiled for every request and can result in high CPU usage and increased request latency when multiple routes are configured with such matchers. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2024-23322 | Envoy is a high-performance edge/middle/service proxy. Envoy will crash when certain timeouts happen within the same interval. The crash occurs when the following are true: 1. hedge_on_per_try_timeout is enabled, 2. per_try_idle_timeout is enabled (it can only be done in configuration), 3. per-try-timeout is enabled, either through headers or configuration and its value is equal, or within the backoff interval of the per_try_idle_timeout. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-44487 | The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023. |
| CVE-2023-35945 | Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy’s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11. |
| CVE-2023-35944 | Envoy is an open source edge and service proxy designed for cloud-native applications. Envoy allows mixed-case schemes in HTTP/2, however, some internal scheme checks are case-sensitive. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, this can lead to the rejection of requests with mixed-case schemes such as `htTp` or `htTps`, or the bypassing of some requests such as `https` in unencrypted connections. With a fix in versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, Envoy will now lowercase scheme values by default, and change the internal scheme checks that were case-sensitive to be case-insensitive. There are no known workarounds for this issue. |
| CVE-2023-35943 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, the CORS filter will segfault and crash Envoy when the `origin` header is removed and deleted between `decodeHeaders`and `encodeHeaders`. Versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12 have a fix for this issue. As a workaround, do not remove the `origin` header in the Envoy configuration. |
| CVE-2023-35942 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, gRPC access loggers using listener's global scope can cause a `use-after-free` crash when the listener is drained. Versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12 have a fix for this issue. As a workaround, disable gRPC access log or stop listener update. |
| CVE-2023-35941 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, a malicious client is able to construct credentials with permanent validity in some specific scenarios. This is caused by the some rare scenarios in which HMAC payload can be always valid in OAuth2 filter's check. Versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12 have a fix for this issue. As a workaround, avoid wildcards/prefix domain wildcards in the host's domain configuration. |
| CVE-2023-33869 | Enphase Envoy versions D7.0.88 is vulnerable to a command injection exploit that may allow an attacker to execute root commands. |
| CVE-2023-2816 | Consul and Consul Enterprise allowed any user with service:write permissions to use Envoy extensions configured via service-defaults to patch remote proxy instances that target the configured service, regardless of whether the user has permission to modify the service(s) corresponding to those modified proxies. |
| CVE-2023-27496 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the OAuth filter assumes that a `state` query param is present on any response that looks like an OAuth redirect response. Sending it a request with the URI path equivalent to the redirect path, without the `state` parameter, will lead to abnormal termination of Envoy process. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 contain a patch. The issue can also be mitigated by locking down OAuth traffic, disabling the filter, or by filtering traffic before it reaches the OAuth filter (e.g. via a lua script). |
| CVE-2023-27493 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy does not sanitize or escape request properties when generating request headers. This can lead to characters that are illegal in header values to be sent to the upstream service. In the worst case, it can cause upstream service to interpret the original request as two pipelined requests, possibly bypassing the intent of Envoy’s security policy. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 contain a patch. As a workaround, disable adding request headers based on the downstream request properties, such as downstream certificate properties. |
| CVE-2023-27492 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the Lua filter is vulnerable to denial of service. Attackers can send large request bodies for routes that have Lua filter enabled and trigger crashes. As of versions versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy no longer invokes the Lua coroutine if the filter has been reset. As a workaround for those whose Lua filter is buffering all requests/ responses, mitigate by using the buffer filter to avoid triggering the local reply in the Lua filter. |
| CVE-2023-27491 | Envoy is an open source edge and service proxy designed for cloud-native applications. Compliant HTTP/1 service should reject malformed request lines. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, There is a possibility that non compliant HTTP/1 service may allow malformed requests, potentially leading to a bypass of security policies. This issue is fixed in versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9. |
| CVE-2023-27488 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, escalation of privileges is possible when `failure_mode_allow: true` is configured for `ext_authz` filter. For affected components that are used for logging and/or visibility, requests may not be logged by the receiving service. When Envoy was configured to use ext_authz, ext_proc, tap, ratelimit filters, and grpc access log service and an http header with non-UTF-8 data was received, Envoy would generate an invalid protobuf message and send it to the configured service. The receiving service would typically generate an error when decoding the protobuf message. For ext_authz that was configured with ``failure_mode_allow: true``, the request would have been allowed in this case. For the other services, this could have resulted in other unforeseen errors such as a lack of visibility into requests. As of versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy by default sanitizes the values sent in gRPC service calls to be valid UTF-8, replacing data that is not valid UTF-8 with a `!` character. This behavioral change can be temporarily reverted by setting runtime guard `envoy.reloadable_features.service_sanitize_non_utf8_strings` to false. As a workaround, one may set `failure_mode_allow: false` for `ext_authz`. |
| CVE-2023-27487 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the client may bypass JSON Web Token (JWT) checks and forge fake original paths. The header `x-envoy-original-path` should be an internal header, but Envoy does not remove this header from the request at the beginning of request processing when it is sent from an untrusted client. The faked header would then be used for trace logs and grpc logs, as well as used in the URL used for `jwt_authn` checks if the `jwt_authn` filter is used, and any other upstream use of the x-envoy-original-path header. Attackers may forge a trusted `x-envoy-original-path` header. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 have patches for this issue. |
| CVE-2022-31045 | Istio is an open platform to connect, manage, and secure microservices. In affected versions ill-formed headers sent to Envoy in certain configurations can lead to unexpected memory access resulting in undefined behavior or crashing. Users are most likely at risk if they have an Istio ingress Gateway exposed to external traffic. This vulnerability has been resolved in versions 1.12.8, 1.13.5, and 1.14.1. Users are advised to upgrade. There are no known workarounds for this issue. |
| CVE-2022-29228 | Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 the OAuth filter would try to invoke the remaining filters in the chain after emitting a local response, which triggers an ASSERT() in newer versions and corrupts memory on earlier versions. continueDecoding() shouldn’t ever be called from filters after a local reply has been sent. Users are advised to upgrade. There are no known workarounds for this issue. |
| CVE-2022-29227 | Envoy is a cloud-native high-performance edge/middle/service proxy. In versions prior to 1.22.1 if Envoy attempts to send an internal redirect of an HTTP request consisting of more than HTTP headers, there’s a lifetime bug which can be triggered. If while replaying the request Envoy sends a local reply when the redirect headers are processed, the downstream state indicates that the downstream stream is not complete. On sending the local reply, Envoy will attempt to reset the upstream stream, but as it is actually complete, and deleted, this result in a use-after-free. Users are advised to upgrade. Users unable to upgrade are advised to disable internal redirects if crashes are observed. |
| CVE-2022-29226 | Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 the OAuth filter implementation does not include a mechanism for validating access tokens, so by design when the HMAC signed cookie is missing a full authentication flow should be triggered. However, the current implementation assumes that access tokens are always validated thus allowing access in the presence of any access token attached to the request. Users are advised to upgrade. There is no known workaround for this issue. |
| CVE-2022-29225 | Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 secompressors accumulate decompressed data into an intermediate buffer before overwriting the body in the decode/encodeBody. This may allow an attacker to zip bomb the decompressor by sending a small highly compressed payload. Maliciously constructed zip files may exhaust system memory and cause a denial of service. Users are advised to upgrade. Users unable to upgrade may consider disabling decompression. |
| CVE-2022-29224 | Envoy is a cloud-native high-performance proxy. Versions of envoy prior to 1.22.1 are subject to a segmentation fault in the GrpcHealthCheckerImpl. Envoy can perform various types of upstream health checking. One of them uses gRPC. Envoy also has a feature which can “hold” (prevent removal) upstream hosts obtained via service discovery until configured active health checking fails. If an attacker controls an upstream host and also controls service discovery of that host (via DNS, the EDS API, etc.), an attacker can crash Envoy by forcing removal of the host from service discovery, and then failing the gRPC health check request. This will crash Envoy via a null pointer dereference. Users are advised to upgrade to resolve this vulnerability. Users unable to upgrade may disable gRPC health checking and/or replace it with a different health checking type as a mitigation. |
| CVE-2022-23606 | Envoy is an open source edge and service proxy, designed for cloud-native applications. When a cluster is deleted via Cluster Discovery Service (CDS) all idle connections established to endpoints in that cluster are disconnected. A recursion was introduced in the procedure of disconnecting idle connections that can lead to stack exhaustion and abnormal process termination when a cluster has a large number of idle connections. This infinite recursion causes Envoy to crash. Users are advised to upgrade. |
| CVE-2022-21679 | Istio is an open platform to connect, manage, and secure microservices. In Istio 1.12.0 and 1.12.1 The authorization policy with hosts and notHosts might be accidentally bypassed for ALLOW action or rejected unexpectedly for DENY action during the upgrade from 1.11 to 1.12.0/1.12.1. Istio 1.12 supports the hosts and notHosts fields in authorization policy with a new Envoy API shipped with the 1.12 data plane. A bug in the 1.12.0 and 1.12.1 incorrectly uses the new Envoy API with the 1.11 data plane. This will cause the hosts and notHosts fields to be always matched regardless of the actual value of the host header when mixing 1.12.0/1.12.1 control plane and 1.11 data plane. Users are advised to upgrade or to not mix the 1.12.0/1.12.1 control plane with 1.11 data plane if using hosts or notHosts field in authorization policy. |
| CVE-2022-21657 | Envoy is an open source edge and service proxy, designed for cloud-native applications. In affected versions Envoy does not restrict the set of certificates it accepts from the peer, either as a TLS client or a TLS server, to only those certificates that contain the necessary extendedKeyUsage (id-kp-serverAuth and id-kp-clientAuth, respectively). This means that a peer may present an e-mail certificate (e.g. id-kp-emailProtection), either as a leaf certificate or as a CA in the chain, and it will be accepted for TLS. This is particularly bad when combined with the issue described in pull request #630, in that it allows a Web PKI CA that is intended only for use with S/MIME, and thus exempted from audit or supervision, to issue TLS certificates that will be accepted by Envoy. As a result Envoy will trust upstream certificates that should not be trusted. There are no known workarounds to this issue. Users are advised to upgrade. |
| CVE-2022-21656 | Envoy is an open source edge and service proxy, designed for cloud-native applications. The default_validator.cc implementation used to implement the default certificate validation routines has a "type confusion" bug when processing subjectAltNames. This processing allows, for example, an rfc822Name or uniformResourceIndicator to be authenticated as a domain name. This confusion allows for the bypassing of nameConstraints, as processed by the underlying OpenSSL/BoringSSL implementation, exposing the possibility of impersonation of arbitrary servers. As a result Envoy will trust upstream certificates that should not be trusted. |
| CVE-2022-21655 | Envoy is an open source edge and service proxy, designed for cloud-native applications. The envoy common router will segfault if an internal redirect selects a route configured with direct response or redirect actions. This will result in a denial of service. As a workaround turn off internal redirects if direct response entries are configured on the same listener. |
| CVE-2022-21654 | Envoy is an open source edge and service proxy, designed for cloud-native applications. Envoy's tls allows re-use when some cert validation settings have changed from their default configuration. The only workaround for this issue is to ensure that default tls settings are used. Users are advised to upgrade. |
| CVE-2021-43826 | Envoy is an open source edge and service proxy, designed for cloud-native applications. In affected versions of Envoy a crash occurs when configured for :ref:`upstream tunneling <envoy_v3_api_field_extensions.filters.network.tcp_proxy.v3.TcpProxy.tunneling_config>` and the downstream connection disconnects while the the upstream connection or http/2 stream is still being established. There are no workarounds for this issue. Users are advised to upgrade. |
| CVE-2021-43825 | Envoy is an open source edge and service proxy, designed for cloud-native applications. Sending a locally generated response must stop further processing of request or response data. Envoy tracks the amount of buffered request and response data and aborts the request if the amount of buffered data is over the limit by sending 413 or 500 responses. However when the buffer overflows while response is processed by the filter chain the operation may not be aborted correctly and result in accessing a freed memory block. If this happens Envoy will crash resulting in a denial of service. |
| CVE-2021-43824 | Envoy is an open source edge and service proxy, designed for cloud-native applications. In affected versions a crafted request crashes Envoy when a CONNECT request is sent to JWT filter configured with regex match. This provides a denial of service attack vector. The only workaround is to not use regex in the JWT filter. Users are advised to upgrade. |
| CVE-2021-39206 | Pomerium is an open source identity-aware access proxy. Envoy, which Pomerium is based on, contains two authorization related vulnerabilities CVE-2021-32777 and CVE-2021-32779. This may lead to incorrect routing or authorization policy decisions. With specially crafted requests, incorrect authorization or routing decisions may be made by Pomerium. Pomerium v0.14.8 and v0.15.1 contain an upgraded envoy binary with these vulnerabilities patched. This issue can only be triggered when using path prefix based policy. Removing any such policies should provide mitigation. |
| CVE-2021-39204 | Pomerium is an open source identity-aware access proxy. Envoy, which Pomerium is based on, incorrectly handles resetting of HTTP/2 streams with excessive complexity. This can lead to high CPU utilization when a large number of streams are reset. This can result in a DoS condition. Pomerium versions 0.14.8 and 0.15.1 contain an upgraded envoy binary with this vulnerability patched. |
| CVE-2021-39162 | Pomerium is an open source identity-aware access proxy. Envoy, which Pomerium is based on, can abnormally terminate if an H/2 GOAWAY and SETTINGS frame are received in the same IO event. This can lead to a DoS in the presence of untrusted *upstream* servers. 0.15.1 contains an upgraded envoy binary with this vulnerability patched. If only trusted upstreams are configured, there is not substantial risk of this condition being triggered. |
| CVE-2021-32783 | Contour is a Kubernetes ingress controller using Envoy proxy. In Contour before version 1.17.1 a specially crafted ExternalName type Service may be used to access Envoy's admin interface, which Contour normally prevents from access outside the Envoy container. This can be used to shut down Envoy remotely (a denial of service), or to expose the existence of any Secret that Envoy is using for its configuration, including most notably TLS Keypairs. However, it *cannot* be used to get the *content* of those secrets. Since this attack allows access to the administration interface, a variety of administration options are available, such as shutting down the Envoy or draining traffic. In general, the Envoy admin interface cannot easily be used for making changes to the cluster, in-flight requests, or backend services, but it could be used to shut down or drain Envoy, change traffic routing, or to retrieve secret metadata, as mentioned above. The issue will be addressed in Contour v1.18.0 and a cherry-picked patch release, v1.17.1, has been released to cover users who cannot upgrade at this time. For more details refer to the linked GitHub Security Advisory. |
| CVE-2021-32781 | Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions after Envoy sends a locally generated response it must stop further processing of request or response data. However when local response is generated due the internal buffer overflow while request or response is processed by the filter chain the operation may not be stopped completely and result in accessing a freed memory block. A specifically constructed request delivered by an untrusted downstream or upstream peer in the presence of extensions that modify and increase the size of request or response bodies resulting in a Denial of Service when using extensions that modify and increase the size of request or response bodies, such as decompressor filter. Envoy versions 1.19.1, 1.18.4, 1.17.4, 1.16.5 contain fixes to address incomplete termination of request processing after locally generated response. As a workaround disable Envoy's decompressor, json-transcoder or grpc-web extensions or proprietary extensions that modify and increase the size of request or response bodies, if feasible. |
| CVE-2021-32780 | Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions Envoy transitions a H/2 connection to the CLOSED state when it receives a GOAWAY frame without any streams outstanding. The connection state is transitioned to DRAINING when it receives a SETTING frame with the SETTINGS_MAX_CONCURRENT_STREAMS parameter set to 0. Receiving these two frames in the same I/O event results in abnormal termination of the Envoy process due to invalid state transition from CLOSED to DRAINING. A sequence of H/2 frames delivered by an untrusted upstream server will result in Denial of Service in the presence of untrusted **upstream** servers. Envoy versions 1.19.1, 1.18.4 contain fixes to stop processing of pending H/2 frames after connection transition to the CLOSED state. |
| CVE-2021-32779 | Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions envoy incorrectly handled a URI '#fragment' element as part of the path element. Envoy is configured with an RBAC filter for authorization or similar mechanism with an explicit case of a final "/admin" path element, or is using a negative assertion with final path element of "/admin". The client sends request to "/app1/admin#foo". In Envoy prior to 1.18.0, or 1.18.0+ configured with path_normalization=false. Envoy treats fragment as a suffix of the query string when present, or as a suffix of the path when query string is absent, so it evaluates the final path element as "/admin#foo" and mismatches with the configured "/admin" path element. In Envoy 1.18.0+ configured with path_normalization=true. Envoy transforms this to /app1/admin%23foo and mismatches with the configured /admin prefix. The resulting URI is sent to the next server-agent with the offending "#foo" fragment which violates RFC3986 or with the nonsensical "%23foo" text appended. A specifically constructed request with URI containing '#fragment' element delivered by an untrusted client in the presence of path based request authorization resulting in escalation of Privileges when path based request authorization extensions. Envoy versions 1.19.1, 1.18.4, 1.17.4, 1.16.5 contain fixes that removes fragment from URI path in incoming requests. |
| CVE-2021-32778 | Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions envoy’s procedure for resetting a HTTP/2 stream has O(N^2) complexity, leading to high CPU utilization when a large number of streams are reset. Deployments are susceptible to Denial of Service when Envoy is configured with high limit on H/2 concurrent streams. An attacker wishing to exploit this vulnerability would require a client opening and closing a large number of H/2 streams. Envoy versions 1.19.1, 1.18.4, 1.17.4, 1.16.5 contain fixes to reduce time complexity of resetting HTTP/2 streams. As a workaround users may limit the number of simultaneous HTTP/2 dreams for upstream and downstream peers to a low number, i.e. 100. |
| CVE-2021-32777 | Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions when ext-authz extension is sending request headers to the external authorization service it must merge multiple value headers according to the HTTP spec. However, only the last header value is sent. This may allow specifically crafted requests to bypass authorization. Attackers may be able to escalate privileges when using ext-authz extension or back end service that uses multiple value headers for authorization. A specifically constructed request may be delivered by an untrusted downstream peer in the presence of ext-authz extension. Envoy versions 1.19.1, 1.18.4, 1.17.4, 1.16.5 contain fixes to the ext-authz extension to correctly merge multiple request header values, when sending request for authorization. |
| CVE-2021-32574 | HashiCorp Consul and Consul Enterprise 1.3.0 through 1.10.0 Envoy proxy TLS configuration does not validate destination service identity in the encoded subject alternative name. Fixed in 1.8.14, 1.9.8, and 1.10.1. |
| CVE-2021-29492 | Envoy is a cloud-native edge/middle/service proxy. Envoy does not decode escaped slash sequences `%2F` and `%5C` in HTTP URL paths in versions 1.18.2 and before. A remote attacker may craft a path with escaped slashes, e.g. `/something%2F..%2Fadmin`, to bypass access control, e.g. a block on `/admin`. A backend server could then decode slash sequences and normalize path and provide an attacker access beyond the scope provided for by the access control policy. ### Impact Escalation of Privileges when using RBAC or JWT filters with enforcement based on URL path. Users with back end servers that interpret `%2F` and `/` and `%5C` and `\` interchangeably are impacted. ### Attack Vector URL paths containing escaped slash characters delivered by untrusted client. Patches in versions 1.18.3, 1.17.3, 1.16.4, 1.15.5 contain new path normalization option to decode escaped slash characters. As a workaround, if back end servers treat `%2F` and `/` and `%5C` and `\` interchangeably and a URL path based access control is configured, one may reconfigure the back end server to not treat `%2F` and `/` and `%5C` and `\` interchangeably. |
| CVE-2021-29258 | An issue was discovered in Envoy 1.14.0. There is a remotely exploitable crash for HTTP2 Metadata, because an empty METADATA map triggers a Reachable Assertion. |
| CVE-2021-28683 | An issue was discovered in Envoy through 1.71.1. There is a remotely exploitable NULL pointer dereference and crash in TLS when an unknown TLS alert code is received. |
| CVE-2021-28682 | An issue was discovered in Envoy through 1.71.1. There is a remotely exploitable integer overflow in which a very large grpc-timeout value leads to unexpected timeout calculations. |
| CVE-2021-21378 | Envoy is a cloud-native high-performance edge/middle/service proxy. In Envoy version 1.17.0 an attacker can bypass authentication by presenting a JWT token with an issuer that is not in the provider list when Envoy's JWT Authentication filter is configured with the `allow_missing` requirement under `requires_any` due to a mistake in implementation. Envoy's JWT Authentication filter can be configured with the `allow_missing` requirement that will be satisfied if JWT is missing (JwtMissed error) and fail if JWT is presented or invalid. Due to a mistake in implementation, a JwtUnknownIssuer error was mistakenly converted to JwtMissed when `requires_any` was configured. So if `allow_missing` was configured under `requires_any`, an attacker can bypass authentication by presenting a JWT token with an issuer that is not in the provider list. Integrity may be impacted depending on configuration if the JWT token is used to protect against writes or modifications. This regression was introduced on 2020/11/12 in PR 13839 which fixed handling `allow_missing` under RequiresAny in a JwtRequirement (see issue 13458). The AnyVerifier aggregates the children verifiers' results into a final status where JwtMissing is the default error. However, a JwtUnknownIssuer was mistakenly treated the same as a JwtMissing error and the resulting final aggregation was the default JwtMissing. As a result, `allow_missing` would allow a JWT token with an unknown issuer status. This is fixed in version 1.17.1 by PR 15194. The fix works by preferring JwtUnknownIssuer over a JwtMissing error, fixing the accidental conversion and bypass with `allow_missing`. A user could detect whether a bypass occurred if they have Envoy logs enabled with debug verbosity. Users can enable component level debug logs for JWT. The JWT filter logs will indicate that there is a request with a JWT token and a failure that the JWT token is missing. |
| CVE-2020-8664 | CNCF Envoy through 1.13.0 has incorrect Access Control when using SDS with Combined Validation Context. Using the same secret (e.g. trusted CA) across many resources together with the combined validation context could lead to the “static” part of the validation context to be not applied, even though it was visible in the active config dump. |
| CVE-2020-8663 | Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may exhaust file descriptors and/or memory when accepting too many connections. |
| CVE-2020-8661 | CNCF Envoy through 1.13.0 may consume excessive amounts of memory when responding internally to pipelined requests. |
| CVE-2020-8660 | CNCF Envoy through 1.13.0 TLS inspector bypass. TLS inspector could have been bypassed (not recognized as a TLS client) by a client using only TLS 1.3. Because TLS extensions (SNI, ALPN) were not inspected, those connections might have been matched to a wrong filter chain, possibly bypassing some security restrictions in the process. |
| CVE-2020-8659 | CNCF Envoy through 1.13.0 may consume excessive amounts of memory when proxying HTTP/1.1 requests or responses with many small (i.e. 1 byte) chunks. |
| CVE-2020-35471 | Envoy before 1.16.1 mishandles dropped and truncated datagrams, as demonstrated by a segmentation fault for a UDP packet size larger than 1500. |
| CVE-2020-35470 | Envoy before 1.16.1 logs an incorrect downstream address because it considers only the directly connected peer, not the information in the proxy protocol header. This affects situations with tcp-proxy as the network filter (not HTTP filters). |
| CVE-2020-25755 | An issue was discovered on Enphase Envoy R3.x and D4.x (and other current) devices. The upgrade_start function in /installer/upgrade_start allows remote authenticated users to execute arbitrary commands via the force parameter. |
| CVE-2020-25754 | An issue was discovered on Enphase Envoy R3.x and D4.x devices. There is a custom PAM module for user authentication that circumvents traditional user authentication. This module uses a password derived from the MD5 hash of the username and serial number. The serial number can be retrieved by an unauthenticated user at /info.xml. Attempts to change the user password via passwd or other tools have no effect. |
| CVE-2020-25753 | An issue was discovered on Enphase Envoy R3.x and D4.x devices with v3 software. The default admin password is set to the last 6 digits of the serial number. The serial number can be retrieved by an unauthenticated user at /info.xml. |
| CVE-2020-25752 | An issue was discovered on Enphase Envoy R3.x and D4.x devices. There are hardcoded web-panel login passwords for the installer and Enphase accounts. The passwords for these accounts are hardcoded values derived from the MD5 hash of the username and serial number mixed with some static strings. The serial number can be retrieved by an unauthenticated user at /info.xml. These passwords can be easily calculated by an attacker; users are unable to change these passwords. |
| CVE-2020-25018 | Envoy master between 2d69e30 and 3b5acb2 may fail to parse request URL that requires host canonicalization. |
| CVE-2020-25017 | Envoy through 1.15.0 only considers the first value when multiple header values are present for some HTTP headers. Envoy’s setCopy() header map API does not replace all existing occurences of a non-inline header. |
| CVE-2020-15127 | In Contour ( Ingress controller for Kubernetes) before version 1.7.0, a bad actor can shut down all instances of Envoy, essentially killing the entire ingress data plane. GET requests to /shutdown on port 8090 of the Envoy pod initiate Envoy's shutdown procedure. The shutdown procedure includes flipping the readiness endpoint to false, which removes Envoy from the routing pool. When running Envoy (For example on the host network, pod spec hostNetwork=true), the shutdown manager's endpoint is accessible to anyone on the network that can reach the Kubernetes node that's running Envoy. There is no authentication in place that prevents a rogue actor on the network from shutting down Envoy via the shutdown manager endpoint. Successful exploitation of this issue will lead to bad actors shutting down all instances of Envoy, essentially killing the entire ingress data plane. This is fixed in version 1.7.0. |
| CVE-2020-15104 | In Envoy before versions 1.12.6, 1.13.4, 1.14.4, and 1.15.0 when validating TLS certificates, Envoy would incorrectly allow a wildcard DNS Subject Alternative Name apply to multiple subdomains. For example, with a SAN of *.example.com, Envoy would incorrectly allow nested.subdomain.example.com, when it should only allow subdomain.example.com. This defect applies to both validating a client TLS certificate in mTLS, and validating a server TLS certificate for upstream connections. This vulnerability is only applicable to situations where an untrusted entity can obtain a signed wildcard TLS certificate for a domain of which you only intend to trust a subdomain of. For example, if you intend to trust api.mysubdomain.example.com, and an untrusted actor can obtain a signed TLS certificate for *.example.com or *.com. Configurations are vulnerable if they use verify_subject_alt_name in any Envoy version, or if they use match_subject_alt_names in version 1.14 or later. This issue has been fixed in Envoy versions 1.12.6, 1.13.4, 1.14.4, 1.15.0. |
| CVE-2020-12605 | Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may consume excessive amounts of memory when processing HTTP/1.1 headers with long field names or requests with long URLs. |
| CVE-2020-12604 | Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier is susceptible to increased memory usage in the case where an HTTP/2 client requests a large payload but does not send enough window updates to consume the entire stream and does not reset the stream. |
| CVE-2020-12603 | Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may consume excessive amounts of memory when proxying HTTP/2 requests or responses with many small (i.e. 1 byte) data frames. |
| CVE-2020-11767 | Istio through 1.5.1 and Envoy through 1.14.1 have a data-leak issue. If there is a TCP connection (negotiated with SNI over HTTPS) to *.example.com, a request for a domain concurrently configured explicitly (e.g., abc.example.com) is sent to the server(s) listening behind *.example.com. The outcome should instead be 421 Misdirected Request. Imagine a shared caching forward proxy re-using an HTTP/2 connection for a large subnet with many users. If a victim is interacting with abc.example.com, and a server (for abc.example.com) recycles the TCP connection to the forward proxy, the victim's browser may suddenly start sending sensitive data to a *.example.com server. This occurs because the forward proxy between the victim and the origin server reuses connections (which obeys the specification), but neither Istio nor Envoy corrects this by sending a 421 error. Similarly, this behavior voids the security model browsers have put in place between domains. |
| CVE-2019-9901 | Envoy 1.9.0 and before does not normalize HTTP URL paths. A remote attacker may craft a relative path, e.g., something/../admin, to bypass access control, e.g., a block on /admin. A backend server could then interpret the non-normalized path and provide an attacker access beyond the scope provided for by the access control policy. |
| CVE-2019-9900 | When parsing HTTP/1.x header values, Envoy 1.9.0 and before does not reject embedded zero characters (NUL, ASCII 0x0). This allows remote attackers crafting header values containing embedded NUL characters to potentially bypass header matching rules, gaining access to unauthorized resources. |
| CVE-2019-7678 | A directory traversal vulnerability was discovered in Enphase Envoy R3.*.* via images/, include/, include/js, or include/css on TCP port 8888. |
| CVE-2019-7677 | XSS exists in Enphase Envoy R3.*.* via the profileName parameter to the /home URI on TCP port 8888. |
| CVE-2019-7676 | A weak password vulnerability was discovered in Enphase Envoy R3.*.*. One can login via TCP port 8888 with the admin password for the admin account. |
| CVE-2019-25014 | A NULL pointer dereference was found in pkg/proxy/envoy/v2/debug.go getResourceVersion in Istio pilot before 1.5.0-alpha.0. If a particular HTTP GET request is made to the pilot API endpoint, it is possible to cause the Go runtime to panic (resulting in a denial of service to the istio-pilot application). |
| CVE-2019-18838 | An issue was discovered in Envoy 1.12.0. Upon receipt of a malformed HTTP request without a Host header, it sends an internally generated "Invalid request" response. This internally generated response is dispatched through the configured encoder filter chain before being sent to the client. An encoder filter that invokes route manager APIs that access a request's Host header causes a NULL pointer dereference, resulting in abnormal termination of the Envoy process. |
| CVE-2019-18836 | Envoy 1.12.0 allows a remote denial of service because of resource loops, as demonstrated by a single idle TCP connection being able to keep a worker thread in an infinite busy loop when continue_on_listener_filters_timeout is used." |
| CVE-2019-18802 | An issue was discovered in Envoy 1.12.0. An untrusted remote client may send an HTTP header (such as Host) with whitespace after the header content. Envoy will treat "header-value " as a different string from "header-value" so for example with the Host header "example.com " one could bypass "example.com" matchers. |
| CVE-2019-18801 | An issue was discovered in Envoy 1.12.0. An untrusted remote client may send HTTP/2 requests that write to the heap outside of the request buffers when the upstream is HTTP/1. This may be used to corrupt nearby heap contents (leading to a query-of-death scenario) or may be used to bypass Envoy's access control mechanisms such as path based routing. An attacker can also modify requests from other users that happen to be proximal temporally and spatially. |
| CVE-2019-15226 | Upon receiving each incoming request header data, Envoy will iterate over existing request headers to verify that the total size of the headers stays below a maximum limit. The implementation in versions 1.10.0 through 1.11.1 for HTTP/1.x traffic and all versions of Envoy for HTTP/2 traffic had O(n^2) performance characteristics. A remote attacker may craft a request that stays below the maximum request header size but consists of many thousands of small headers to consume CPU and result in a denial-of-service attack. |
| CVE-2019-15225 | In Envoy through 1.11.1, users may configure a route to match incoming path headers via the libstdc++ regular expression implementation. A remote attacker may send a request with a very long URI to result in a denial of service (memory consumption). This is a related issue to CVE-2019-14993. |
| CVE-2019-12995 | Istio before 1.2.2 mishandles certain access tokens, leading to "Epoch 0 terminated with an error" in Envoy. This is related to a jwt_authenticator.cc segmentation fault. |
| CVE-2018-17500 | Envoy Passport for Android and Envoy Passport for iPhone could allow a local attacker to obtain sensitive information, caused by the storing of hardcoded OAuth Creds in plaintext. An attacker could exploit this vulnerability to obtain sensitive information. |
| CVE-2018-17499 | Envoy Passport for Android and Envoy Passport for iPhone could allow a local attacker to obtain sensitive information, caused by the storing of unencrypted data in logs. An attacker could exploit this vulnerability to obtain two API keys, a token and other sensitive information. |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
