Search Results

There are 2005 CVE Records that match your search.
Name Description
CVE-2024-3411 Implementations of IPMI Authenticated sessions does not provide enough randomness to protect from session hijacking, allowing an attacker to use either predictable IPMI Session ID or weak BMC Random Number to bypass security controls using spoofed IPMI packets to manage BMC device.
CVE-2024-3046 In Eclipse Kura LogServlet component included in versions 5.0.0 to 5.4.1, a specifically crafted request to the servlet can allow an unauthenticated user to retrieve the device logs. Also, downloaded logs may be used by an attacker to perform privilege escalation by using the session id of an authenticated user reported in logs. This issue affects org.eclipse.kura:org.eclipse.kura.web2 version range [2.0.600, 2.4.0], which is included in Eclipse Kura version range [5.0.0, 5.4.1]
CVE-2024-30391 A Missing Authentication for Critical Function vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an unauthenticated network-based attacker to cause limited impact to the integrity or availability of the device. If a device is configured with IPsec authentication algorithm hmac-sha-384 or hmac-sha-512, tunnels are established normally but for traffic traversing the tunnel no authentication information is sent with the encrypted data on egress, and no authentication information is expected on ingress. So if the peer is an unaffected device transit traffic is going to fail in both directions. If the peer is an also affected device transit traffic works, but without authentication, and configuration and CLI operational commands indicate authentication is performed. This issue affects Junos OS: All versions before 20.4R3-S7, 21.1 versions before 21.1R3, 21.2 versions before 21.2R2-S1, 21.2R3, 21.3 versions before 21.3R1-S2, 21.3R2.
CVE-2024-30378 A Use After Free vulnerability in command processing of Juniper Networks Junos OS on MX Series allows a local, authenticated attacker to cause the broadband edge service manager daemon (bbe-smgd) to crash upon execution of specific CLI commands, creating a Denial of Service (DoS) condition. The process crashes and restarts automatically. When specific CLI commands are executed, the bbe-smgd daemon attempts to write into an area of memory (mgd socket) that was already closed, causing the process to crash. This process manages and controls the configuration of broadband subscriber sessions and services. While the process is unavailable, additional subscribers will not be able to connect to the device, causing a temporary Denial of Service condition. This issue only occurs if Graceful Routing Engine Switchover (GRES) and Subscriber Management are enabled. This issue affects Junos OS: * All versions before 20.4R3-S5, * from 21.1 before 21.1R3-S4, * from 21.2 before 21.2R3-S3, * from 21.3 before 21.3R3-S5, * from 21.4 before 21.4R3-S5, * from 22.1 before 22.1R3, * from 22.2 before 22.2R3, * from 22.3 before 22.3R2;
CVE-2024-29948 There is an out-of-bounds read vulnerability in some Hikvision NVRs. An authenticated attacker could exploit this vulnerability by sending specially crafted messages to a vulnerable device, causing a service abnormality.
CVE-2024-28006 Improper authentication vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to view device information.
CVE-2024-27086 The MSAL library enabled acquisition of security tokens to call protected APIs. MSAL.NET applications targeting Xamarin Android and .NET Android (e.g., MAUI) using the library from versions 4.48.0 to 4.60.0 are impacted by a low severity vulnerability. A malicious application running on a customer Android device can cause local denial of service against applications that were built using MSAL.NET for authentication on the same device (i.e., prevent the user of the legitimate application from logging in) due to incorrect activity export configuration. MSAL.NET version 4.60.1 includes the fix. As a workaround, a developer may explicitly mark the MSAL.NET activity non-exported.
CVE-2024-26763 In the Linux kernel, the following vulnerability has been resolved: dm-crypt: don't modify the data when using authenticated encryption It was said that authenticated encryption could produce invalid tag when the data that is being encrypted is modified [1]. So, fix this problem by copying the data into the clone bio first and then encrypt them inside the clone bio. This may reduce performance, but it is needed to prevent the user from corrupting the device by writing data with O_DIRECT and modifying them at the same time. [1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/
CVE-2024-23630 An arbitrary firmware upload vulnerability exists in the Motorola MR2600. An attacker can exploit this vulnerability to achieve code execution on the device. Authentication is required, however can be bypassed.
CVE-2024-23219 The issue was addressed with improved authentication. This issue is fixed in iOS 17.3 and iPadOS 17.3. Stolen Device Protection may be unexpectedly disabled.
CVE-2024-21872 The device allows an unauthenticated attacker to bypass authentication and modify the cookie to reveal hidden pages that allows more critical operations to the transmitter.
CVE-2024-21619 A Missing Authentication for Critical Function vulnerability combined with a Generation of Error Message Containing Sensitive Information vulnerability in J-Web of Juniper Networks Junos OS on SRX Series and EX Series allows an unauthenticated, network-based attacker to access sensitive system information. When a user logs in, a temporary file which contains the configuration of the device (as visible to that user) is created in the /cache folder. An unauthenticated attacker can then attempt to access such a file by sending a specific request to the device trying to guess the name of such a file. Successful exploitation will reveal configuration information. This issue affects Juniper Networks Junos OS on SRX Series and EX Series: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S6; * 22.1 versions earlier than 22.1R3-S5; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R3; * 23.2 versions earlier than 23.2R1-S2, 23.2R2.
CVE-2024-21594 A Heap-based Buffer Overflow vulnerability in the Network Services Daemon (NSD) of Juniper Networks Junos OS allows authenticated, low privileged, local attacker to cause a Denial of Service (DoS). On an SRX 5000 Series device, when executing a specific command repeatedly, memory is corrupted, which leads to a Flow Processing Daemon (flowd) crash. The NSD process has to be restarted to restore services. If this issue occurs, it can be checked with the following command: user@host> request security policies check The following log message can also be observed: Error: policies are out of sync for PFE node<number>.fpc<number>.pic<number>. This issue affects: Juniper Networks Junos OS on SRX 5000 Series * All versions earlier than 20.4R3-S6; * 21.1 versions earlier than 21.1R3-S5; * 21.2 versions earlier than 21.2R3-S4; * 21.3 versions earlier than 21.3R3-S3; * 21.4 versions earlier than 21.4R3-S3; * 22.1 versions earlier than 22.1R3-S1; * 22.2 versions earlier than 22.2R3; * 22.3 versions earlier than 22.3R2.
CVE-2024-20378 A vulnerability in the web-based management interface of Cisco IP Phone firmware could allow an unauthenticated, remote attacker to retrieve sensitive information from an affected device. This vulnerability is due to a lack of authentication for specific endpoints of the web-based management interface on an affected device. An attacker could exploit this vulnerability by connecting to the affected device. A successful exploit could allow the attacker to gain unauthorized access to the device, enabling the recording of user credentials and traffic to and from the affected device, including VoIP calls that could be replayed.
CVE-2024-20359 A vulnerability in a legacy capability that allowed for the preloading of VPN clients and plug-ins and that has been available in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary code with root-level privileges. Administrator-level privileges are required to exploit this vulnerability. This vulnerability is due to improper validation of a file when it is read from system flash memory. An attacker could exploit this vulnerability by copying a crafted file to the disk0: file system of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the affected device after the next reload of the device, which could alter system behavior. Because the injected code could persist across device reboots, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.
CVE-2024-20358 A vulnerability in the Cisco Adaptive Security Appliance (ASA) restore functionality that is available in Cisco ASA Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system with root-level privileges. Administrator-level privileges are required to exploit this vulnerability. This vulnerability exists because the contents of a backup file are improperly sanitized at restore time. An attacker could exploit this vulnerability by restoring a crafted backup file to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as root.
CVE-2024-20352 A vulnerability in Cisco Emergency Responder could allow an authenticated, remote attacker to conduct a directory traversal attack, which could allow the attacker to perform arbitrary actions on an affected device. This vulnerability is due to insufficient protections for the web UI of an affected system. An attacker could exploit this vulnerability by sending crafted requests to the web UI. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the affected user, such as accessing password or log files or uploading and deleting existing files from the system.
CVE-2024-20346 A vulnerability in the web-based management interface of Cisco AppDynamics Controller could allow an authenticated, remote attacker to perform a reflected cross-site scripting (XSS) attack against a user of the interface of an affected device. This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by persuading a user to click a malicious link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
CVE-2024-20345 A vulnerability in the file upload functionality of Cisco AppDynamics Controller could allow an authenticated, remote attacker to conduct directory traversal attacks on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to access sensitive data on an affected device.
CVE-2024-20338 A vulnerability in the ISE Posture (System Scan) module of Cisco Secure Client for Linux could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to the use of an uncontrolled search path element. An attacker could exploit this vulnerability by copying a malicious library file to a specific directory in the filesystem and persuading an administrator to restart a specific process. A successful exploit could allow the attacker to execute arbitrary code on an affected device with root privileges.
CVE-2024-20336 A vulnerability in the web-based user interface of Cisco Small Business 100, 300, and 500 Series Wireless APs could allow an authenticated, remote attacker to perform buffer overflow attacks against an affected device. In order to exploit this vulnerability, the attacker must have valid administrative credentials for the device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system.
CVE-2024-20335 A vulnerability in the web-based management interface of Cisco Small Business 100, 300, and 500 Series Wireless APs could allow an authenticated, remote attacker to perform command injection attacks against an affected device. In order to exploit this vulnerability, the attacker must have valid administrative credentials for the device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system.
CVE-2024-20333 A vulnerability in the web-based management interface of Cisco Catalyst Center, formerly Cisco DNA Center, could allow an authenticated, remote attacker to change specific data within the interface on an affected device. This vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to change a specific field within the web-based management interface, even though they should not have access to change that field.
CVE-2024-20332 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to conduct a server-side request forgery (SSRF) attack through an affected device. This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to send arbitrary network requests that are sourced from the affected device. To successfully exploit this vulnerability, the attacker would need valid Super Admin credentials.
CVE-2024-20320 A vulnerability in the SSH client feature of Cisco IOS XR Software for Cisco 8000 Series Routers and Cisco Network Convergence System (NCS) 540 Series and 5700 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient validation of arguments that are included with the SSH client CLI command. An attacker with low-privileged access to an affected device could exploit this vulnerability by issuing a crafted SSH client command to the CLI. A successful exploit could allow the attacker to elevate privileges to root on the affected device.
CVE-2024-20319 A vulnerability in the UDP forwarding code of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to bypass configured management plane protection policies and access the Simple Network Management Plane (SNMP) server of an affected device. This vulnerability is due to incorrect UDP forwarding programming when using SNMP with management plane protection. An attacker could exploit this vulnerability by attempting to perform an SNMP operation using broadcast as the destination address that could be processed by an affected device that is configured with an SNMP server. A successful exploit could allow the attacker to communicate to the device on the configured SNMP ports. Although an unauthenticated attacker could send UDP datagrams to the configured SNMP port, only an authenticated user can retrieve or modify data using SNMP requests.
CVE-2024-20309 A vulnerability in auxiliary asynchronous port (AUX) functions of Cisco IOS XE Software could allow an authenticated, local attacker to cause an affected device to reload or stop responding. This vulnerability is due to the incorrect handling of specific ingress traffic when flow control hardware is enabled on the AUX port. An attacker could exploit this vulnerability by reverse telnetting to the AUX port and sending specific data after connecting. A successful exploit could allow the attacker to cause the device to reset or stop responding, resulting in a denial of service (DoS) condition.
CVE-2024-20306 A vulnerability in the Unified Threat Defense (UTD) configuration CLI of Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary commands as root on the underlying host operating system. To exploit this vulnerability, an attacker must have level 15 privileges on the affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting a crafted CLI command to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as root on the underlying operating system.
CVE-2024-20301 A vulnerability in Cisco Duo Authentication for Windows Logon and RDP could allow an authenticated, physical attacker to bypass secondary authentication and access an affected Windows device. This vulnerability is due to a failure to invalidate locally created trusted sessions after a reboot of the affected device. An attacker with primary user credentials could exploit this vulnerability by attempting to authenticate to an affected device. A successful exploit could allow the attacker to access the affected device without valid permissions.
CVE-2024-20295 A vulnerability in the CLI of the Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit this vulnerability, the attacker must have read-only or higher privileges on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.
CVE-2024-20294 A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific fields in an LLDP frame. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface of an affected device and having an authenticated user retrieve LLDP statistics from the affected device through CLI show commands or Simple Network Management Protocol (SNMP) requests. A successful exploit could allow the attacker to cause the LLDP service to crash and stop running on the affected device. In certain situations, the LLDP crash may result in a reload of the affected device. Note: LLDP is a Layer 2 link protocol. To exploit this vulnerability, an attacker would need to be directly connected to an interface of an affected device, either physically or logically (for example, through a Layer 2 Tunnel configured to transport the LLDP protocol).
CVE-2024-20287 A vulnerability in the web-based management interface of the Cisco WAP371 Wireless-AC/N Dual Radio Access Point (AP) with Single Point Setup could allow an authenticated, remote attacker to perform command injection attacks against an affected device. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit this vulnerability, the attacker must have valid administrative credentials for the device.
CVE-2024-20283 A vulnerability in Cisco Nexus Dashboard could allow an authenticated, remote attacker to learn cluster deployment information on an affected device. This vulnerability is due to improper access controls on a specific API endpoint. An attacker could exploit this vulnerability by sending queries to the API endpoint. A successful exploit could allow an attacker to access metrics and information about devices in the Nexus Dashboard cluster.
CVE-2024-20282 A vulnerability in Cisco Nexus Dashboard could allow an authenticated, local attacker with valid rescue-user credentials to elevate privileges to root on an affected device. This vulnerability is due to insufficient protections for a sensitive access token. An attacker could exploit this vulnerability by using this token to access resources within the device infrastructure. A successful exploit could allow an attacker to gain root access to the filesystem or hosted containers on an affected device.
CVE-2024-20278 A vulnerability in the NETCONF feature of Cisco IOS XE Software could allow an authenticated, remote attacker to elevate privileges to root on an affected device. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted input over NETCONF to an affected device. A successful exploit could allow the attacker to elevate privileges from Administrator to root.
CVE-2024-20277 A vulnerability in the web-based management interface of Cisco ThousandEyes Enterprise Agent, Virtual Appliance installation type, could allow an authenticated, remote attacker to perform a command injection and elevate privileges to root. This vulnerability is due to insufficient validation of user-supplied input for the web interface. An attacker could exploit this vulnerability by sending a crafted HTTP packet to the affected device. A successful exploit could allow the attacker to execute arbitrary commands and elevate privileges to root.
CVE-2024-20262 A vulnerability in the Secure Copy Protocol (SCP) and SFTP feature of Cisco IOS XR Software could allow an authenticated, local attacker to create or overwrite files in a system directory, which could lead to a denial of service (DoS) condition. The attacker would require valid user credentials to perform this attack. This vulnerability is due to a lack of proper validation of SCP and SFTP CLI input parameters. An attacker could exploit this vulnerability by authenticating to the device and issuing SCP or SFTP CLI commands with specific parameters. A successful exploit could allow the attacker to impact the functionality of the device, which could lead to a DoS condition. The device may need to be manually rebooted to recover. Note: This vulnerability is exploitable only when a local user invokes SCP or SFTP commands at the Cisco IOS XR CLI. A local user with administrative privileges could exploit this vulnerability remotely.
CVE-2024-20251 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to perform a stored cross-site scripting (XSS) attack against a user of the interface on an affected device. This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
CVE-2024-1889 Cross-Site Request Forgery vulnerability in SMA Cluster Controller, affecting version 01.05.01.R. This vulnerability could allow an attacker to send a malicious link to an authenticated user to perform actions with these user permissions on the affected device.
CVE-2024-1303 Incorrectly limiting the path to a restricted directory vulnerability in Badger Meter Monitool that affects versions up to 4.6.3 and earlier. This vulnerability allows an authenticated attacker to retrieve any file from the device using the download-file functionality.
CVE-2024-0568 CWE-287: Improper Authentication vulnerability exists that could cause unauthorized tampering of device configuration over NFC communication.
CVE-2024-0554 A Cross-site scripting (XSS) vulnerability has been found on WIC1200, affecting version 1.1. An authenticated user could store a malicious javascript payload in the device model parameter via '/setup/diags_ir_learn.asp', allowing the attacker to retrieve the session details of another user.
CVE-2024-0405 The Burst Statistics &#8211; Privacy-Friendly Analytics for WordPress plugin, version 1.5.3, is vulnerable to Post-Authenticated SQL Injection via multiple JSON parameters in the /wp-json/burst/v1/data/compare endpoint. Affected parameters include 'browser', 'device', 'page_id', 'page_url', 'platform', and 'referrer'. This vulnerability arises due to insufficient escaping of user-supplied parameters and the lack of adequate preparation in SQL queries. As a result, authenticated attackers with editor access or higher can append additional SQL queries into existing ones, potentially leading to unauthorized access to sensitive information from the database.
CVE-2023-7017 Sciener locks' firmware update mechanism do not authenticate or validate firmware updates if passed to the lock through the Bluetooth Low Energy service. A challenge request can be sent to the lock with a command to prepare for an update, rather than an unlock request, allowing an attacker to compromise the device.
CVE-2023-6951 A Use of Weak Credentials vulnerability affecting the Wi-Fi network generated by a set of DJI drones could allow a remote attacker to derive the WPA2 PSK key and authenticate without permission to the drone&#8217;s Wi- Fi network. This, in turn, allows the attacker to perform unauthorized interaction with the network services exposed by the drone and to potentially decrypt the Wi-Fi traffic exchanged between the drone and the Android/IOS device of the legitimate user during QuickTransfer mode. Affected models are Mavic 3 Pro until v01.01.0300, Mavic 3 until v01.00.1200, Mavic 3 Classic until v01.00.0500, Mavic 3 Enterprise until v07.01.10.03, Matrice 300 until v57.00.01.00, Matrice M30 until v07.01.0022 and Mini 3 Pro until v01.00.0620.
CVE-2023-6399 A format string vulnerability in Zyxel ATP series firmware versions from 4.32 through 5.37 Patch 1, USG FLEX series firmware versions from 4.50 through 5.37 Patch 1, USG FLEX 50(W) series firmware versions from 4.16 through 5.37 Patch 1, USG20(W)-VPN series firmware versions from 4.16 through 5.37 Patch 1, and USG FLEX H series firmware versions from 1.10 through 1.10 Patch 1 could allow an authenticated IPSec VPN user to cause DoS conditions against the &#8220;deviceid&#8221; daemon by sending a crafted hostname to an affected device if it has the &#8220;Device Insight&#8221; feature enabled.
CVE-2023-6398 A post-authentication command injection vulnerability in the file upload binary in Zyxel ATP series firmware versions from 4.32 through 5.37 Patch 1, USG FLEX series firmware versions from 4.50 through 5.37 Patch 1, USG FLEX 50(W) series firmware versions from 4.16 through 5.37 Patch 1, USG20(W)-VPN series firmware versions from 4.16 through 5.37 Patch 1, USG FLEX H series firmware versions from 1.10 through 1.10 Patch 1, NWA50AX firmware versions through 6.29(ABYW.3), WAC500 firmware versions through 6.65(ABVS.1), WAX300H firmware versions through 6.60(ACHF.1), and WBE660S firmware versions through 6.65(ACGG.1) could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device via FTP.
CVE-2023-6368 In WhatsUp Gold versions released before 2023.1, an API endpoint was found to be missing an authentication mechanism. It is possible for an unauthenticated attacker to enumerate information related to a registered device being monitored by WhatsUp Gold.
CVE-2023-6232 Buffer overflow in the Address Book username process in authentication of Mobile Device Function of Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code.*: Satera LBP670C Series/Satera MF750C Series firmware v03.07 and earlier sold in Japan. Color imageCLASS LBP674C/Color imageCLASS X LBP1333C/Color imageCLASS MF750C Series/Color imageCLASS X MF1333C Series firmware v03.07 and earlier sold in US. i-SENSYS LBP673Cdw/C1333P/i-SENSYS MF750C Series/C1333i Series firmware v03.07 and earlier sold in Europe.
CVE-2023-6230 Buffer overflow in the Address Book password process in authentication of Mobile Device Function of Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code.*: Satera LBP670C Series/Satera MF750C Series firmware v03.07 and earlier sold in Japan. Color imageCLASS LBP674C/Color imageCLASS X LBP1333C/Color imageCLASS MF750C Series/Color imageCLASS X MF1333C Series firmware v03.07 and earlier sold in US. i-SENSYS LBP673Cdw/C1333P/i-SENSYS MF750C Series/C1333i Series firmware v03.07 and earlier sold in Europe.
CVE-2023-5960 An improper privilege management vulnerability in the hotspot feature of the Zyxel USG FLEX series firmware versions 4.50 through 5.37 and VPN series firmware versions 4.30 through 5.37 could allow an authenticated local attacker to access the system files on an affected device.
CVE-2023-5879 Users&#8217; product account authentication data was stored in clear text in The Genie Company Aladdin Connect Mobile Application Version 5.65 Build 2075 (and below) on Android Devices. This allows the attacker, with access to the android device, to potentially retrieve users' clear text authentication credentials.
CVE-2023-5797 An improper privilege management vulnerability in the debug CLI command of the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, VPN series firmware versions 4.30 through 5.37, NWA50AX firmware version 6.29(ABYW.2), WAC500 firmware version 6.65(ABVS.1), WAX300H firmware version 6.60(ACHF.1), and WBE660S firmware version 6.65(ACGG.1), could allow an authenticated local attacker to access the administrator&#8217;s logs on an affected device.
CVE-2023-5650 An improper privilege management vulnerability in the ZySH of the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, and VPN series firmware versions 4.30 through 5.37, could allow an authenticated local attacker to modify the URL of the registration page in the web GUI of an affected device.
CVE-2023-50916 Kyocera Device Manager before 3.1.1213.0 allows NTLM credential exposure during UNC path authentication via a crafted change from a local path to a UNC path. It allows administrators to configure the backup location of the database used by the application. Attempting to change this location to a UNC path via the GUI is rejected due to the use of a \ (backslash) character, which is supposed to be disallowed in a pathname. Intercepting and modifying this request via a proxy, or sending the request directly to the application endpoint, allows UNC paths to be set for the backup location. Once such a location is set, Kyocera Device Manager attempts to confirm access and will try to authenticate to the UNC path; depending on the configuration of the environment, this may authenticate to the UNC with Windows NTLM hashes. This could allow NTLM credential relaying or cracking attacks.
CVE-2023-50715 Home Assistant is open source home automation software. Prior to version 2023.12.3, the login page discloses all active user accounts to any unauthenticated browsing request originating on the Local Area Network. Version 2023.12.3 contains a patch for this issue. When starting the Home Assistant 2023.12 release, the login page returns all currently active user accounts to browsing requests from the Local Area Network. Tests showed that this occurs when the request is not authenticated and the request originated locally, meaning on the Home Assistant host local subnet or any other private subnet. The rationale behind this is to make the login more user-friendly and an experience better aligned with other applications that have multiple user-profiles. However, as a result, all accounts are displayed regardless of them having logged in or not and for any device that navigates to the server. This disclosure is mitigated by the fact that it only occurs for requests originating from a LAN address. But note that this applies to the local subnet where Home Assistant resides and to any private subnet that can reach it.
CVE-2023-50430 The Goodix Fingerprint Device, as shipped in Dell Inspiron 15 computers, does not follow the Secure Device Connection Protocol (SDCP) when enrolling via Linux, and accepts an unauthenticated configuration packet to select the Windows template database, which allows bypass of Windows Hello authentication by enrolling an attacker's fingerprint.
CVE-2023-50199 D-Link G416 httpd Missing Authentication for Critical Function Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to gain access to critical functions on the device. Was ZDI-CAN-21287.
CVE-2023-49252 A vulnerability has been identified in SIMATIC CN 4100 (All versions < V2.7). The affected application allows IP configuration change without authentication to the device. This could allow an attacker to cause denial of service condition.
CVE-2023-4884 An attacker could send an HTTP request to an Open5GS endpoint and retrieve the information stored on the device due to the lack of Authentication.
CVE-2023-4834 In Red Lion Europe mbCONNECT24 and mymbCONNECT24 and Helmholz myREX24 and myREX24.virtual up to and including 2.14.2 an improperly implemented access validation allows an authenticated, low privileged attacker to gain read access to limited, non-critical device information in his account he should not have access to.
CVE-2023-48257 The vulnerability allows a remote attacker to access sensitive data inside exported packages or obtain up to Remote Code Execution (RCE) with root privileges on the device. The vulnerability can be exploited directly by authenticated users, via crafted HTTP requests, or indirectly by unauthenticated users, by accessing already-exported backup packages, or crafting an import package and inducing an authenticated victim into sending the HTTP upload request.
CVE-2023-4817 This vulnerability allows an authenticated attacker to upload malicious files by bypassing the restrictions of the upload functionality, compromising the entire device.
CVE-2023-47674 Missing authentication for critical function vulnerability in First Corporation's DVRs allows a remote unauthenticated attacker to rewrite or obtain the configuration information of the affected device. Note that updates are provided only for Late model of CFR-4EABC, CFR-4EAB, CFR-8EAB, CFR-16EAB, MD-404AB, and MD-808AB. As for the other products, apply the workaround.
CVE-2023-47304 An issue was discovered in Vonage Box Telephone Adapter VDV23 version VDV21-3.2.11-0.5.1, allows local attackers to bypass UART authentication controls and read/write arbitrary values to the memory of the device.
CVE-2023-46665 Sielco PolyEco1000 is vulnerable to an authentication bypass vulnerability due to an attacker modifying passwords in a POST request and gain unauthorized access to the affected device with administrative privileges.
CVE-2023-46384 LOYTEC electronics GmbH LINX Configurator 7.4.10 is vulnerable to Insecure Permissions. Cleartext storage of credentials allows remote attackers to disclose admin password and bypass an authentication to login Loytec device.
CVE-2023-46383 LOYTEC electronics GmbH LINX Configurator 7.4.10 uses HTTP Basic Authentication, which transmits usernames and passwords in base64-encoded cleartext and allows remote attackers to steal the password and gain full control of Loytec device configuration.
CVE-2023-46306 The web administration interface in NetModule Router Software (NRSW) 4.6 before 4.6.0.106 and 4.8 before 4.8.0.101 executes an OS command constructed with unsanitized user input: shell metacharacters in the /admin/gnssAutoAlign.php device_id parameter. This occurs because another thread can be started before the trap that triggers the cleanup function. A successful exploit could allow an authenticated user to execute arbitrary commands with elevated privileges. NOTE: this is different from CVE-2023-0861 and CVE-2023-0862, which were fixed in version 4.6.0.105.
CVE-2023-45851 The Android Client application, when enrolled to the AppHub server,connects to an MQTT broker without enforcing any server authentication. This issue allows an attacker to force the Android Client application to connect to a malicious MQTT broker, enabling it to send fake messages to the HMI device
CVE-2023-45599 A CWE-646 &#8220;Reliance on File Name or Extension of Externally-Supplied File&#8221; vulnerability in the &#8220;iec61850&#8221; functionality of the web application allows a remote authenticated attacker to upload any arbitrary type of file into the device. This issue affects: AiLux imx6 bundle below version imx6_1.0.7-2.
CVE-2023-45595 A CWE-434 &#8220;Unrestricted Upload of File with Dangerous Type&#8221; vulnerability in the &#8220;file_configuration&#8221; functionality of the web application allows a remote authenticated attacker to upload any arbitrary type of file into the device. This issue affects: AiLux imx6 bundle below version imx6_1.0.7-2.
CVE-2023-45591 A CWE-122 &#8220;Heap-based Buffer Overflow&#8221; vulnerability in the &#8220;logger_generic&#8221; function of the &#8220;Ax_rtu&#8221; binary allows a remote authenticated attacker to trigger a memory corruption in the context of the binary. This may result in a Denial-of-Service (DoS) condition, possibly in the execution of arbitrary code with the same privileges of the process (root), or have other unspecified impacts on the device. This issue affects: AiLux imx6 bundle below version imx6_1.0.7-2.
CVE-2023-45321 The Android Client application, when enrolled with the define method 1 (the user manually inserts the server ip address), use HTTP protocol to retrieve sensitive information (ip address and credentials to connect to a remote MQTT broker entity) instead of HTTPS and this feature is not configurable by the user. Due to the lack of encryption of HTTP,this issue allows an attacker placed in the same subnet network of the HMI device to intercept username and password necessary to authenticate to the MQTT server responsible to implement the remote management protocol.
CVE-2023-44420 D-Link DIR-X3260 prog.cgi Incorrect Implementation of Authentication Algorithm Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-X3260 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the prog.cgi executable. The issue results from an incorrect implementation of the authentication algorithm. An attacker can leverage this vulnerability to bypass authentication on the device. Was ZDI-CAN-21100.
CVE-2023-44321 Affected devices do not properly validate the length of inputs when performing certain configuration changes in the web interface allowing an authenticated attacker to cause a denial of service condition. The device needs to be restarted for the web interface to become available again.
CVE-2023-44319 Affected devices use a weak checksum algorithm to protect the configuration backup that an administrator can export from the device. This could allow an authenticated attacker with administrative privileges or an attacker that tricks a legitimate administrator to upload a modified configuration file to change the configuration of an affected device.
CVE-2023-44318 Affected devices use a hardcoded key to obfuscate the configuration backup that an administrator can export from the device. This could allow an authenticated attacker with administrative privileges or an attacker that obtains a configuration backup to extract configuration information from the exported file.
CVE-2023-44184 An Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability in the management daemon (mgd) process of Juniper Networks Junos OS and Junos OS Evolved allows a network-based authenticated low-privileged attacker, by executing a specific command via NETCONF, to cause a CPU Denial of Service to the device's control plane. This issue affects: Juniper Networks Junos OS * All versions prior to 20.4R3-S7; * 21.2 versions prior to 21.2R3-S5; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S4; * 22.1 versions prior to 22.1R3-S2; * 22.2 versions prior to 22.2R3; * 22.3 versions prior to 22.3R2-S1, 22.3R3; * 22.4 versions prior to 22.4R1-S2, 22.4R2. Juniper Networks Junos OS Evolved * All versions prior to 21.4R3-S4-EVO; * 22.1 versions prior to 22.1R3-S2-EVO; * 22.2 versions prior to 22.2R3-EVO; * 22.3 versions prior to 22.3R3-EVO; * 22.4 versions prior to 22.4R2-EVO. An indicator of compromise can be seen by first determining if the NETCONF client is logged in and fails to log out after a reasonable period of time and secondly reviewing the WCPU percentage for the mgd process by running the following command: mgd process example: user@device-re#> show system processes extensive | match "mgd|PID" | except last PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND 92476 root 100 0 500M 89024K CPU3 3 57.5H 89.60% mgd <<<<<<<<<<< review the high cpu percentage. Example to check for NETCONF activity: While there is no specific command that shows a specific session in use for NETCONF, you can review logs for UI_LOG_EVENT with "client-mode 'netconf'" For example: mgd[38121]: UI_LOGIN_EVENT: User 'root' login, class 'super-user' [38121], ssh-connection '10.1.1.1 201 55480 10.1.1.2 22', client-mode 'netconf'
CVE-2023-44112 Out-of-bounds access vulnerability in the device authentication module. Successful exploitation of this vulnerability may affect confidentiality.
CVE-2023-44111 Vulnerability of brute-force attacks on the device authentication module.Successful exploitation of this vulnerability may affect service confidentiality.
CVE-2023-44096 Vulnerability of brute-force attacks on the device authentication module.Successful exploitation of this vulnerability may affect service confidentiality.
CVE-2023-4397 A buffer overflow vulnerability in the Zyxel ATP series firmware version 5.37, USG FLEX series firmware version 5.37, USG FLEX 50(W) series firmware version 5.37, and USG20(W)-VPN series firmware version 5.37, could allow an authenticated local attacker with administrator privileges to cause denial-of-service (DoS) conditions by executing the CLI command with crafted strings on an affected device.
CVE-2023-43885 Missing error handling in the HTTP server component of Tenda RX9 Pro Firmware V22.03.02.20 allows authenticated attackers to arbitrarily lock the device.
CVE-2023-43492 In Weintek's cMT3000 HMI Web CGI device, the cgi-bin codesys.cgi contains a stack-based buffer overflow, which could allow an anonymous attacker to hijack control flow and bypass login authentication.
CVE-2023-43477 The ping_from parameter of ping_tracerte.cgi in the web UI of Telstra Smart Modem Gen 2 (Arcadyan LH1000), firmware versions < 0.18.15r, was not properly sanitized before being used in a system call, which could allow an authenticated attacker to achieve command injection as root on the device.
CVE-2023-43135 There is an unauthorized access vulnerability in TP-LINK ER5120G 4.0 2.0.0 Build 210817 Rel.80868n, which allows attackers to obtain sensitive information of the device without authentication, obtain user tokens, and ultimately log in to the device backend management.
CVE-2023-43134 There is an unauthorized access vulnerability in Netis 360RAC1200 v1.3.4517, which allows attackers to obtain sensitive information of the device without authentication, obtain user tokens, and ultimately log in to the device backend management.
CVE-2023-43088 Dell Client BIOS contains a pre-boot direct memory access (DMA) vulnerability. An authenticated attacker with physical access to the system may potentially exploit this vulnerability in order to execute arbitrary code on the device.
CVE-2023-43066 Dell Unity prior to 5.3 contains a Restricted Shell Bypass vulnerability. This could allow an authenticated, local attacker to exploit this vulnerability by authenticating to the device CLI and issuing certain commands.
CVE-2023-4291 Frauscher Sensortechnik GmbH FDS101 for FAdC/FAdCi v1.4.24 and all previous versions are vulnerable to a remote code execution (RCE) vulnerability via manipulated parameters of the web interface without authentication. This could lead to a full compromise of the FDS101 device.
CVE-2023-42797 A vulnerability has been identified in CP-8031 MASTER MODULE (All versions < CPCI85 V05.20), CP-8050 MASTER MODULE (All versions < CPCI85 V05.20). The network configuration service of affected devices contains a flaw in the conversion of ipv4 addresses that could lead to an uninitialized variable being used in succeeding validation steps. By uploading specially crafted network configuration, an authenticated remote attacker could be able to inject commands that are executed on the device with root privileges during device startup.
CVE-2023-4202 Advantech EKI-1524, EKI-1522, EKI-1521 devices through 1.21 are affected by a Stored Cross-Site Scripting vulnerability, which can be triggered by authenticated users in the device name field of the web-interface.
CVE-2023-41965 Sending some requests in the web application of the vulnerable device allows information to be obtained due to the lack of security in the authentication process.
CVE-2023-41679 An improper access control vulnerability [CWE-284] in FortiManager management interface 7.2.0 through 7.2.2, 7.0.0 through 7.0.7, 6.4.0 through 6.4.11, 6.2 all versions, 6.0 all versions may allow a remote and authenticated attacker with at least "device management" permission on his profile and belonging to a specific ADOM to add and delete CLI script on other ADOMs
CVE-2023-4152 Frauscher Sensortechnik GmbH FDS101 for FAdC/FAdCi v1.4.24 and all previous versions are vulnerable to a path traversal vulnerability of the web interface by a crafted URL without authentication. This enables an remote attacker to read all files on the filesystem of the FDS101 device.
CVE-2023-41356 NCSIST ManageEngine Mobile Device Manager(MDM) APP's special function has a path traversal vulnerability. An unauthenticated remote attacker can exploit this vulnerability to bypass authentication and read arbitrary system files.
CVE-2023-41351 Chunghwa Telecom NOKIA G-040W-Q has a vulnerability of authentication bypass, which allows an unauthenticated remote attacker to bypass the authentication mechanism to log in to the device by an alternative URL. This makes it possible for unauthenticated remote attackers to log in as any existing users, such as an administrator, to perform arbitrary system operations or disrupt service.
CVE-2023-41349 ASUS router RT-AX88U has a vulnerability of using externally controllable format strings within its Advanced Open VPN function. An authenticated remote attacker can exploit the exported OpenVPN configuration to execute an externally-controlled format string attack, resulting in sensitivity information leakage, or forcing the device to reset and permanent denial of service.
CVE-2023-41344 NCSIST ManageEngine Mobile Device Manager(MDM) APP's special function has a path traversal vulnerability. An unauthenticated remote attacker can exploit this vulnerability to bypass authentication and read arbitrary system files.
CVE-2023-41255 The vulnerability allows an unprivileged user with access to the subnet of the TPC-110W device to gain a root shell on the device itself abusing the lack of authentication of the &#8216;su&#8217; binary file installed on the device that can be accessed through the ADB (Android Debug Bridge) protocol exposed on the network.
CVE-2023-41089 The affected product is vulnerable to an improper authentication vulnerability, which may allow an attacker to impersonate a legitimate user as long as the device keeps the session active, since the attack takes advantage of the cookie header to generate "legitimate" requests.
CVE-2023-40460 The ACEManager component of ALEOS 4.16 and earlier does not validate uploaded file names and types, which could potentially allow an authenticated user to perform client-side script execution within ACEManager, altering the device functionality until the device is restarted.
CVE-2023-40158 Hidden functionality vulnerability in the CBC products allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter its settings. As for the affected products/versions, see the detailed information provided by the vendor. Note that NR4H, NR8H, NR16H series and DR-16F, DR-8F, DR-4F, DR-16H, DR-8H, DR-4H, DR-4M41 series are no longer supported, therefore updates for those products are not provided.
CVE-2023-40144 OS command injection vulnerability in the CBC products allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter its settings. As for the affected products/versions, see the detailed information provided by the vendor. Note that NR4H, NR8H, NR16H series and DR-16F, DR-8F, DR-4F, DR-16H, DR-8H, DR-4H, DR-4M41 series are no longer supported, therefore updates for those products are not provided.
CVE-2023-4001 An authentication bypass flaw was found in GRUB due to the way that GRUB uses the UUID of a device to search for the configuration file that contains the password hash for the GRUB password protection feature. An attacker capable of attaching an external drive such as a USB stick containing a file system with a duplicate UUID (the same as in the "/boot/" file system) can bypass the GRUB password protection feature on UEFI systems, which enumerate removable drives before non-removable ones. This issue was introduced in a downstream patch in Red Hat's version of grub2 and does not affect the upstream package.
CVE-2023-39981 A vulnerability that allows for unauthorized access has been discovered in MXsecurity versions prior to v1.0.1. This vulnerability arises from inadequate authentication measures, potentially leading to the disclosure of device information by a remote attacker.
CVE-2023-39514 Cacti is an open source operational monitoring and fault management framework. Affected versions are subject to a Stored Cross-Site-Scripting (XSS) Vulnerability which allows an authenticated user to poison data stored in the _cacti_'s database. These data will be viewed by administrative _cacti_ accounts and execute JavaScript code in the victim's browser at view-time. The script under `graphs.php` displays graph details such as data-source paths, data template information and graph related fields. _CENSUS_ found that an adversary that is able to configure either a data-source template with malicious code appended in the data-source name or a device with a malicious payload injected in the device name, may deploy a stored XSS attack against any user with _General Administration>Graphs_ privileges. A user that possesses the _Template Editor>Data Templates_ permissions can configure the data-source name in _cacti_. Please note that this may be a _low privileged_ user. This configuration occurs through `http://<HOST>/cacti/data_templates.php` by editing an existing or adding a new data template. If a template is linked to a graph then the formatted template name will be rendered in the graph's management page. A user that possesses the _General Administration>Sites/Devices/Data_ permissions can configure the device name in _cacti_. This vulnerability has been addressed in version 1.2.25. Users are advised to upgrade. Users unable to upgrade should add manual HTML escaping.
CVE-2023-39513 Cacti is an open source operational monitoring and fault management framework. Affected versions are subject to a Stored Cross-Site-Scripting (XSS) Vulnerability which allows an authenticated user to poison data stored in the _cacti_'s database. These data will be viewed by administrative _cacti_ accounts and execute JavaScript code in the victim's browser at view-time. The script under `host.php` is used to monitor and manage hosts in the _cacti_ app, hence displays useful information such as data queries and verbose logs. _CENSUS_ found that an adversary that is able to configure a data-query template with malicious code appended in the template path, in order to deploy a stored XSS attack against any user with the _General Administration>Sites/Devices/Data_ privileges. A user that possesses the _Template Editor>Data Queries_ permissions can configure the data query template path in _cacti_. Please note that such a user may be a low privileged user. This configuration occurs through `http://<HOST>/cacti/data_queries.php` by editing an existing or adding a new data query template. If a template is linked to a device then the formatted template path will be rendered in the device's management page, when a _verbose data query_ is requested. This vulnerability has been addressed in version 1.2.25. Users are advised to upgrade. Users unable to update should manually filter HTML output.
CVE-2023-39512 Cacti is an open source operational monitoring and fault management framework. Affected versions are subject to a Stored Cross-Site-Scripting (XSS) Vulnerability which allows an authenticated user to poison data stored in the _cacti_'s database. These data will be viewed by administrative _cacti_ accounts and execute JavaScript code in the victim's browser at view-time. The script under `data_sources.php` displays the data source management information (e.g. data source path, polling configuration, device name related to the datasource etc.) for different data visualizations of the _cacti_ app. _CENSUS_ found that an adversary that is able to configure a malicious device name, can deploy a stored XSS attack against any user of the same (or broader) privileges. A user that possesses the _General Administration>Sites/Devices/Data_ permissions can configure the device names in _cacti_. This configuration occurs through `http://<HOST>/cacti/host.php`, while the rendered malicious payload is exhibited at `http://<HOST>/cacti/data_sources.php`. This vulnerability has been addressed in version 1.2.25. Users are advised to upgrade. Users unable to update should manually filter HTML output.
CVE-2023-39511 Cacti is an open source operational monitoring and fault management framework. Affected versions are subject to a Stored Cross-Site-Scripting (XSS) Vulnerability which allows an authenticated user to poison data stored in the _cacti_'s database. These data will be viewed by administrative _cacti_ accounts and execute JavaScript code in the victim's browser at view-time. The script under `reports_admin.php` displays reporting information about graphs, devices, data sources etc. _CENSUS_ found that an adversary that is able to configure a malicious device name, related to a graph attached to a report, can deploy a stored XSS attack against any super user who has privileges of viewing the `reports_admin.php` page, such as administrative accounts. A user that possesses the _General Administration>Sites/Devices/Data_ permissions can configure the device names in _cacti_. This configuration occurs through `http://<HOST>/cacti/host.php`, while the rendered malicious payload is exhibited at `http://<HOST>/cacti/reports_admin.php` when the a graph with the maliciously altered device name is linked to the report. This issue has been addressed in version 1.2.25. Users are advised to upgrade. Users unable to upgrade should manually filter HTML output.
CVE-2023-39510 Cacti is an open source operational monitoring and fault management framework. Affected versions are subject to a Stored Cross-Site-Scripting (XSS) Vulnerability allows an authenticated user to poison data stored in the _cacti_'s database. These data will be viewed by administrative _cacti_ accounts and execute JavaScript code in the victim's browser at view-time. The`reports_admin.php` script displays reporting information about graphs, devices, data sources etc. CENSUS found that an adversary that is able to configure a malicious Device name, can deploy a stored XSS attack against any user of the same (or broader) privileges. A user that possesses the _General Administration>Sites/Devices/Data_ permissions can configure the device names in _cacti_. This configuration occurs through `http://<HOST>/cacti/host.php`, while the rendered malicious payload is exhibited at `http://<HOST>/cacti/reports_admin.php` when the a graph with the maliciously altered device name is linked to the report. This vulnerability has been addressed in version 1.2.25. Users are advised to upgrade. Users unable to update should manually filter HTML output.
CVE-2023-39366 Cacti is an open source operational monitoring and fault management framework. Affected versions are subject to a Stored Cross-Site-Scripting (XSS) Vulnerability allows an authenticated user to poison data stored in the _cacti_'s database. These data will be viewed by administrative _cacti_ accounts and execute JavaScript code in the victim's browser at view-time. The `data_sources.php` script displays the data source management information (e.g. data source path, polling configuration etc.) for different data visualizations of the _cacti_ app. CENSUS found that an adversary that is able to configure a malicious Device name, can deploy a stored XSS attack against any user of the same (or broader) privileges. A user that possesses the _General Administration>Sites/Devices/Data_ permissions can configure the device names in _cacti_. This configuration occurs through `http://<HOST>/cacti/host.php`, while the rendered malicious payload is exhibited at `http://<HOST>/cacti/data_sources.php`. This vulnerability has been addressed in version 1.2.25. Users are advised to upgrade. Users unable to update should manually filter HTML output.
CVE-2023-39362 Cacti is an open source operational monitoring and fault management framework. In Cacti 1.2.24, under certain conditions, an authenticated privileged user, can use a malicious string in the SNMP options of a Device, performing command injection and obtaining remote code execution on the underlying server. The `lib/snmp.php` file has a set of functions, with similar behavior, that accept in input some variables and place them into an `exec` call without a proper escape or validation. This issue has been addressed in version 1.2.25. Users are advised to upgrade. There are no known workarounds for this vulnerability.
CVE-2023-39231 PingFederate using the PingOne MFA adapter allows a new MFA device to be paired without requiring second factor authentication from an existing registered device. A threat actor may be able to exploit this vulnerability to register their own MFA device if they have knowledge of a victim user's first factor credentials.
CVE-2023-38585 Improper authentication vulnerability in the CBC products allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter its settings. As for the affected products/versions, see the detailed information provided by the vendor. Note that NR4H, NR8H, NR16H series and DR-16F, DR-8F, DR-4F, DR-16H, DR-8H, DR-4H, DR-4M41 series are no longer supported, therefore updates for those products are not provided.
CVE-2023-38584 In Weintek's cMT3000 HMI Web CGI device, the cgi-bin command_wb.cgi contains a stack-based buffer overflow, which could allow an anonymous attacker to hijack control flow and bypass login authentication.
CVE-2023-38489 Kirby is a content management system. A vulnerability in versions prior to 3.5.8.3, 3.6.6.3, 3.7.5.2, 3.8.4.1, and 3.9.6 affects all Kirby sites with user accounts (unless Kirby's API and Panel are disabled in the config). It can only be abused if a Kirby user is logged in on a device or browser that is shared with potentially untrusted users or if an attacker already maliciously used a previous password to log in to a Kirby site as the affected user. Insufficient Session Expiration is when a web site permits an attacker to reuse old session credentials or session IDs for authorization. In the variation described in this advisory, it allows attackers to stay logged in to a Kirby site on another device even if the logged in user has since changed their password. Kirby did not invalidate user sessions that were created with a password that was since changed by the user or by a site admin. If a user changed their password to lock out an attacker who was already in possession of the previous password or of a login session on another device or browser, the attacker would not be reliably prevented from accessing the Kirby site as the affected user. The problem has been patched in Kirby 3.5.8.3, 3.6.6.3, 3.7.5.2, 3.8.4.1, and 3.9.6. In all of the mentioned releases, the maintainers have updated the authentication implementation to keep track of the hashed password in each active session. If the password changed since the login, the session is invalidated. To enforce this fix even if the vulnerability was previously abused, all users are logged out from the Kirby site after updating to one of the patched releases.
CVE-2023-38030 Saho&#8217;s attendance devices ADM100 and ADM-100FP have a vulnerability of missing authentication for critical functions. An unauthenticated remote attacker can execute system commands in partial website URLs to read sensitive device information without permissions.
CVE-2023-37928 A post-authentication command injection vulnerability in the WSGI server of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an authenticated attacker to execute some operating system (OS) commands by sending a crafted URL to a vulnerable device.
CVE-2023-37927 The improper neutralization of special elements in the CGI program of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an authenticated attacker to execute some operating system (OS) commands by sending a crafted URL to a vulnerable device.
CVE-2023-37926 A buffer overflow vulnerability in the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, and VPN series firmware versions 4.30 through 5.37, could allow an authenticated local attacker to cause denial-of-service (DoS) conditions by executing the CLI command to dump system logs on an affected device.
CVE-2023-37925 An improper privilege management vulnerability in the debug CLI command of the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, VPN series firmware versions 4.30 through 5.37, NWA50AX firmware version 6.29(ABYW.2), WAC500 firmware version 6.65(ABVS.1), WAX300H firmware version 6.60(ACHF.1), and WBE660S firmware version 6.65(ACGG.1), could allow an authenticated local attacker to access system files on an affected device.
CVE-2023-37861 In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 an authenticated remote attacker can execute code with root permissions with a specially crafted HTTP POST when uploading a certificate to the device.
CVE-2023-37857 In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 an authenticated, remote attacker with admin privileges is able to read hardcoded cryptographic keys allowing the attacker to create valid session cookies. These session-cookies created by the attacker are not sufficient to obtain a valid session on the device.
CVE-2023-3770 Incorrect validation vulnerability of the data entered, allowing an attacker with access to the network on which the affected device is located to use the discovery port protocol (1925/UDP) to obtain device-specific information without the need for authentication.
CVE-2023-37312 D-Link DAP-2622 DDP Set Device Info Device Name Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20089.
CVE-2023-37311 D-Link DAP-2622 DDP Set Device Info Auth Password Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20088.
CVE-2023-37310 D-Link DAP-2622 DDP Set Device Info Auth Username Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2622 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DDP service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20087.
CVE-2023-37216 AnaSystem SensMini M4 &#8211; Using the configuration tool, an authenticated user can cause Denial of Service for the device
CVE-2023-3718 An authenticated command injection vulnerability exists in the AOS-CX command line interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands on the underlying operating system as a privileged user on the affected switch. This allows an attacker to fully compromise the underlying operating system on the device running AOS-CX.
CVE-2023-36144 An authentication bypass in Intelbras Switch SG 2404 MR in firmware 1.00.54 allows an unauthenticated attacker to download the backup file of the device, exposing critical information about the device configuration.
CVE-2023-35972 An authenticated remote command injection vulnerability exists in the ArubaOS web-based management interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands as a privileged user on the underlying operating system. This allows an attacker to fully compromise the underlying operating system on the device running ArubaOS.
CVE-2023-35837 An issue was discovered in SolaX Pocket WiFi 3 through 3.001.02. Authentication for web interface is completed via an unauthenticated WiFi AP. The administrative password for the web interface has a default password, equal to the registration ID of the device. This same registration ID is used as the WiFi SSID name. No routine is in place to force a change to this password on first use or bring its default state to the attention of the user. Once authenticated, an attacker can reconfigure the device or upload new firmware, both of which can lead to Denial of Service, code execution, or Escalation of Privileges.
CVE-2023-35835 An issue was discovered in SolaX Pocket WiFi 3 through 3.001.02. The device provides a WiFi access point for initial configuration. The WiFi network provided has no network authentication (such as an encryption key) and persists permanently, including after enrollment and setup is complete. The WiFi network serves a web-based configuration utility, as well as an unauthenticated ModBus protocol interface.
CVE-2023-35140 The improper privilege management vulnerability in the Zyxel GS1900-24EP switch firmware version V2.70(ABTO.5) could allow an authenticated local user with read-only access to modify system settings on a vulnerable device.
CVE-2023-35137 An improper authentication vulnerability in the authentication module of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an unauthenticated attacker to obtain system information by sending a crafted URL to a vulnerable device.
CVE-2023-35136 An improper input validation vulnerability in the &#8220;Quagga&#8221; package of the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, and VPN series firmware versions 4.30 through 5.37, could allow an authenticated local attacker to access configuration files on an affected device.
CVE-2023-34625 ShowMojo MojoBox Digital Lockbox 1.4 is vulnerable to Authentication Bypass. The implementation of the lock opening mechanism via Bluetooth Low Energy (BLE) is vulnerable to replay attacks. A malicious user is able to intercept BLE requests and replicate them to open the lock at any time. Alternatively, an attacker with physical access to the device on which the Android app is installed, can obtain the latest BLE messages via the app logs and use them for opening the lock.
CVE-2023-3453 ETIC Telecom RAS versions 4.7.0 and prior the web management portal authentication disabled by default. This could allow an attacker with adjacent network access to alter the configuration of the device or cause a denial-of-service condition.
CVE-2023-34441 Baker Hughes &#8211; Bently Nevada 3500 System TDI Firmware version 5.05 contains a cleartext transmission vulnerability which could allow an attacker to steal the authentication secret from communication traffic to the device and reuse it for arbitrary requests.
CVE-2023-34392 A Missing Authentication for Critical Function vulnerability in the Schweitzer Engineering Laboratories SEL-5037 SEL Grid Configurator could allow an attacker to run arbitrary commands on managed devices by an authorized device operator. See Instruction Manual Appendix A and Appendix E dated 20230615 for more details. This issue affects SEL-5037 SEL Grid Configurator: before 4.5.0.20.
CVE-2023-33684 Weak session management in DB Elettronica Telecomunicazioni SpA SFT DAB 600/C Firmware: 1.9.3 Bios firmware: 7.1 (Apr 19 2021) Gui: 2.46 FPGA: 169.55 uc: 6.15 allows attackers on the same network to bypass authentication by re-using the IP address assigned to the device by the NAT protocol.
CVE-2023-33372 Connected IO v2.1.0 and prior uses a hard-coded username/password pair embedded in their device's firmware used for device communication using MQTT. An attacker who gained access to these credentials is able to connect to the MQTT broker and send messages on behalf of devices, impersonating them. in order to sign and verify JWT session tokens, allowing attackers to sign arbitrary session tokens and bypass authentication.
CVE-2023-3266 A non-feature complete authentication mechanism exists in the production application allowing an attacker to bypass all authentication checks if LDAP authentication is selected.An unauthenticated attacker can leverage this vulnerability to log in to the CypberPower PowerPanel Enterprise as an administrator by selecting LDAP authentication from a hidden HTML combo box. Successful exploitation of this vulnerability also requires the attacker to know at least one username on the device, but any password will authenticate successfully.
CVE-2023-3259 The Dataprobe iBoot PDU running firmware version 1.43.03312023 or earlier is vulnerable to authentication bypass. By manipulating the IP address field in the "iBootPduSiteAuth" cookie, a malicious agent can direct the device to connect to a rouge database.Successful exploitation allows the malicious agent to take actions with administrator privileges including, but not limited to, manipulating power levels, modifying user accounts, and exporting confidential user information
CVE-2023-32347 Teltonika&#8217;s Remote Management System versions prior to 4.10.0 use device serial numbers and MAC addresses to identify devices from the user perspective for device claiming and from the device perspective for authentication. If an attacker obtained the serial number and MAC address of a device, they could authenticate as that device and steal communication credentials of the device. This could allow an attacker to enable arbitrary command execution as root by utilizing management options within the newly registered devices.
CVE-2023-32202 Walchem Intuition 9 firmware versions prior to v4.21 are vulnerable to improper authentication. Login credentials are stored in a format that could allow an attacker to use them as-is to login and gain access to the device.
CVE-2023-31140 OpenProject is open source project management software. Starting with version 7.4.0 and prior to version 12.5.4, when a user registers and confirms their first two-factor authentication (2FA) device for an account, existing logged in sessions for that user account are not terminated. Likewise, if an administrators creates a mobile phone 2FA device on behalf of a user, their existing sessions are not terminated. The issue has been resolved in OpenProject version 12.5.4 by actively terminating sessions of user accounts having registered and confirmed a 2FA device. As a workaround, users who register the first 2FA device on their account can manually log out to terminate all other active sessions. This is the default behavior of OpenProject but might be disabled through a configuration option. Double check that this option is not overridden if one plans to employ the workaround.
CVE-2023-31127 libspdm is a sample implementation that follows the DMTF SPDM specifications. A vulnerability has been identified in SPDM session establishment in libspdm prior to version 2.3.1. If a device supports both DHE session and PSK session with mutual authentication, the attacker may be able to establish the session with `KEY_EXCHANGE` and `PSK_FINISH` to bypass the mutual authentication. This is most likely to happen when the Requester begins a session using one method (DHE, for example) and then uses the other method's finish (PSK_FINISH in this example) to establish the session. The session hashes would be expected to fail in this case, but the condition was not detected. This issue only impacts the SPDM responder, which supports `KEY_EX_CAP=1 and `PSK_CAP=10b` at same time with mutual authentication requirement. The SPDM requester is not impacted. The SPDM responder is not impacted if `KEY_EX_CAP=0` or `PSK_CAP=0` or `PSK_CAP=01b`. The SPDM responder is not impacted if mutual authentication is not required. libspdm 1.0, 2.0, 2.1, 2.2, 2.3 are all impacted. Older branches are not maintained, but users of the 2.3 branch may receive a patch in version 2.3.2. The SPDM specification (DSP0274) does not contain this vulnerability.
CVE-2023-30901 A vulnerability has been identified in POWER METER SICAM Q100 (All versions < V2.60), POWER METER SICAM Q100 (All versions < V2.60), POWER METER SICAM Q100 (All versions < V2.60), POWER METER SICAM Q100 (All versions < V2.60). The web interface of the affected devices are vulnerable to Cross-Site Request Forgery attacks. By tricking an authenticated victim user to click a malicious link, an attacker could perform arbitrary actions on the device on behalf of the victim user.
CVE-2023-30762 Improper authentication vulnerability exists in KB-AHR series and KB-IRIP series. If this vulnerability is exploited, an arbitrary OS command may be executed on the product or the device settings may be altered. Affected products and versions are as follows: KB-AHR04D versions prior to 91110.1.101106.78, KB-AHR08D versions prior to 91210.1.101106.78, KB-AHR16D versions prior to 91310.1.101106.78, KB-IRIP04A versions prior to 95110.1.100290.78A, KB-IRIP08A versions prior to 95210.1.100290.78A, and KB-IRIP16A versions prior to 95310.1.100290.78A.
CVE-2023-29155 Versions of INEA ME RTU firmware 3.36b and prior do not require authentication to the "root" account on the host system of the device. This could allow an attacker to obtain admin-level access to the host system.
CVE-2023-29128 A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1). The filename in the upload feature of the web based management of the affected device is susceptible to a path traversal vulnerability. This could allow an authenticated privileged remote attacker to write any file with the extension `.db`.
CVE-2023-29104 A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1). The filename in the upload feature of the web based management of the affected device is susceptible to a path traversal vulnerability. This could allow an authenticated privileged remote attacker to overwrite any file the Linux user `ccuser` has write access to, or to download any file the Linux user `ccuser` has read-only access to.
CVE-2023-29103 A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC712 (All versions < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions < V2.1). The affected device uses a hard-coded password to protect the diagnostic files. This could allow an authenticated attacker to access protected data.
CVE-2023-28963 An Improper Authentication vulnerability in cert-mgmt.php, used by the J-Web component of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to read arbitrary files from temporary folders on the device. This issue affects Juniper Networks Junos OS: All versions prior to 19.1R3-S10; 19.2 versions prior to 19.2R3-S7; 19.3 versions prior to 19.3R3-S8; 19.4 versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.
CVE-2023-28962 An Improper Authentication vulnerability in upload-file.php, used by the J-Web component of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to upload arbitrary files to temporary folders on the device. This issue affects Juniper Networks Junos OS: All versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3-S6; 21.1 version 21.1R1 and later versions; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.
CVE-2023-28809 Some access control products are vulnerable to a session hijacking attack because the product does not update the session ID after a user successfully logs in. To exploit the vulnerability, attackers have to request the session ID at the same time as a valid user logs in, and gain device operation permissions by forging the IP and session ID of an authenticated user.
CVE-2023-28803 An authentication bypass by spoofing of a device with a synthetic IP address is possible in Zscaler Client Connector on Windows, allowing a functionality bypass. This issue affects Client Connector: before 3.9.
CVE-2023-2880 Frauscher Sensortechnik GmbH FDS001 for FAdC/FAdCi v1.3.3 and all previous versions are vulnerable to a path traversal vulnerability of the web interface by a crafted URL without authentication. This enables an remote attacker to read all files on the filesystem of the FDS001 device.
CVE-2023-28436 Tailscale is software for using Wireguard and multi-factor authentication (MFA). A vulnerability identified in the implementation of Tailscale SSH starting in version 1.34.0 and prior to prior to 1.38.2 in FreeBSD allows commands to be run with a higher privilege group ID than that specified in Tailscale SSH access rules. A difference in the behavior of the FreeBSD `setgroups` system call from POSIX meant that the Tailscale client running on a FreeBSD-based operating system did not appropriately restrict groups on the host when using Tailscale SSH. When accessing a FreeBSD host over Tailscale SSH, the egid of the tailscaled process was used instead of that of the user specified in Tailscale SSH access rules. Tailscale SSH commands may have been run with a higher privilege group ID than that specified in Tailscale SSH access rules if they met all of the following criteria: the destination node was a FreeBSD device with Tailscale SSH enabled; Tailscale SSH access rules permitted access for non-root users; and a non-interactive SSH session was used. Affected users should upgrade to version 1.38.2 to remediate the issue.
CVE-2023-28388 Uncontrolled search path element in some Intel(R) Chipset Device Software before version 10.1.19444.8378 may allow an authenticated user to potentially enable escalation of privilege via local access.
CVE-2023-28182 The issue was addressed with improved authentication. This issue is fixed in macOS Ventura 13.3, iOS 16.4 and iPadOS 16.4, iOS 15.7.4 and iPadOS 15.7.4, macOS Monterey 12.6.4, macOS Big Sur 11.7.5. A user in a privileged network position may be able to spoof a VPN server that is configured with EAP-only authentication on a device.
CVE-2023-27990 The cross-site scripting (XSS) vulnerability in Zyxel ATP series firmware versions 4.32 through 5.35, USG FLEX series firmware versions 4.50 through 5.35, USG FLEX 50(W) firmware versions 4.16 through 5.35, USG20(W)-VPN firmware versions 4.16 through 5.35, and VPN series firmware versions 4.30 through 5.35, which could allow an authenticated attacker with administrator privileges to store malicious scripts in a vulnerable device. A successful XSS attack could then result in the stored malicious scripts being executed when the user visits the Logs page of the GUI on the device.
CVE-2023-27989 A buffer overflow vulnerability in the CGI program of the Zyxel NR7101 firmware versions prior to V1.00(ABUV.8)C0 could allow a remote authenticated attacker to cause denial of service (DoS) conditions by sending a crafted HTTP request to a vulnerable device.
CVE-2023-27988 The post-authentication command injection vulnerability in the Zyxel NAS326 firmware versions prior to V5.21(AAZF.13)C0 could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device remotely.
CVE-2023-27964 An authentication issue was addressed with improved state management. This issue is fixed in AirPods Firmware Update 5E133. When your headphones are seeking a connection request to one of your previously paired devices, an attacker in Bluetooth range might be able to spoof the intended source device and gain access to your headphones.
CVE-2023-2759 A hidden API exists in TapHome's core platform before version 2023.2 that allows an authenticated, low privileged user to change passwords of other users without any prior knowledge. The attacker may gain full access to the device by using this vulnerability.
CVE-2023-27409 A vulnerability has been identified in SCALANCE LPE9403 (All versions < V2.1). A path traversal vulnerability was found in the `deviceinfo` binary via the `mac` parameter. This could allow an authenticated attacker with access to the SSH interface on the affected device to read the contents of any file named `address`.
CVE-2023-27408 A vulnerability has been identified in SCALANCE LPE9403 (All versions < V2.1). The `i2c` mutex file is created with the permissions bits of `-rw-rw-rw-`. This file is used as a mutex for multiple applications interacting with i2c. This could allow an authenticated attacker with access to the SSH interface on the affected device to interfere with the integrity of the mutex and the data it protects.
CVE-2023-27407 A vulnerability has been identified in SCALANCE LPE9403 (All versions < V2.1). The web based management of affected device does not properly validate user input, making it susceptible to command injection. This could allow an authenticated remote attacker to access the underlying operating system as the root user.
CVE-2023-27396 FINS (Factory Interface Network Service) is a message communication protocol, which is designed to be used in closed FA (Factory Automation) networks, and is used in FA networks composed of OMRON products. Multiple OMRON products that implement FINS protocol contain following security issues -- (1)Plaintext communication, and (2)No authentication required. When FINS messages are intercepted, the contents may be retrieved. When arbitrary FINS messages are injected, any commands may be executed on, or the system information may be retrieved from, the affected device. Affected products and versions are as follows: SYSMAC CS-series CPU Units, all versions, SYSMAC CJ-series CPU Units, all versions, SYSMAC CP-series CPU Units, all versions, SYSMAC NJ-series CPU Units, all versions, SYSMAC NX1P-series CPU Units, all versions, SYSMAC NX102-series CPU Units, all versions, and SYSMAC NX7 Database Connection CPU Units (Ver.1.16 or later)
CVE-2023-27370 NETGEAR RAX30 Device Configuration Cleartext Storage Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of NETGEAR RAX30 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of device configuration. The issue results from the storage of configuration secrets in plaintext. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-19841.
CVE-2023-2588 Teltonika&#8217;s Remote Management System versions prior to 4.10.0 have a feature allowing users to access managed devices&#8217; local secure shell (SSH)/web management services over the cloud proxy. A user can request a web proxy and obtain a URL in the Remote Management System cloud subdomain. This URL could be shared with others without Remote Management System authentication . An attacker could exploit this vulnerability to create a malicious webpage that uses a trusted and certified domain. An attacker could initiate a reverse shell when a victim connects to the malicious webpage, achieving remote code execution on the victim device.
CVE-2023-2574 Advantech EKI-1524, EKI-1522, EKI-1521 devices through 1.21 are affected by an command injection vulnerability in the device name input field, which can be triggered by authenticated users via a crafted POST request.
CVE-2023-25649 There is a command injection vulnerability in a mobile internet product of ZTE. Due to insufficient validation of SET_DEVICE_LED interface parameter, an authenticated attacker could use the vulnerability to execute arbitrary commands.
CVE-2023-25556 A CWE-287: Improper Authentication vulnerability exists that could allow a device to be compromised when a key of less than seven digits is entered and the attacker has access to the KNX installation.
CVE-2023-23773 Motorola EBTS/MBTS Base Radio fails to check firmware authenticity. The Motorola MBTS Base Radio lacks cryptographic signature validation for firmware update packages, allowing an authenticated attacker to gain arbitrary code execution, extract secret key material, and/or leave a persistent implant on the device.
CVE-2023-23772 Motorola MBTS Site Controller fails to check firmware update authenticity. The Motorola MBTS Site Controller lacks cryptographic signature validation for firmware update packages, allowing an authenticated attacker to gain arbitrary code execution, extract secret key material, and/or leave a persistent implant on the device.
CVE-2023-23444 Missing Authentication for Critical Function in SICK Flexi Classic and Flexi Soft Gateways with Partnumbers 1042193, 1042964, 1044078, 1044072, 1044073, 1044074, 1099830, 1099832, 1127717, 1069070, 1112296, 1051432, 1102420, 1127487, 1121596, 1121597 allows an unauthenticated remote attacker to influence the availability of the device by changing the IP settings of the device via broadcasted UDP packets.
CVE-2023-23371 A cleartext transmission of sensitive information vulnerability has been reported to affect QVPN Device Client. If exploited, the vulnerability could allow local authenticated administrators to read sensitive data via unspecified vectors. We have already fixed the vulnerability in the following version: QVPN Windows 2.2.0.0823 and later
CVE-2023-23370 An insufficiently protected credentials vulnerability has been reported to affect QVPN Device Client. If exploited, the vulnerability could allow local authenticated administrators to gain access to user accounts and access sensitive data used by the user account via unspecified vectors. We have already fixed the vulnerability in the following version: QVPN Windows 2.1.0.0518 and later
CVE-2023-22924 A buffer overflow vulnerability in the Zyxel NBG-418N v2 firmware versions prior to V1.00(AARP.14)C0 could allow a remote authenticated attacker with administrator privileges to cause denial-of-service (DoS) conditions by executing crafted CLI commands on a vulnerable device.
CVE-2023-22923 A format string vulnerability in a binary of the Zyxel NBG-418N v2 firmware versions prior to V1.00(AARP.14)C0 could allow a remote authenticated attacker to cause denial-of-service (DoS) conditions on an affected device.
CVE-2023-22921 A cross-site scripting (XSS) vulnerability in the Zyxel NBG-418N v2 firmware versions prior to V1.00(AARP.14)C0 could allow a remote authenticated attacker with administrator privileges to store malicious scripts using a web management interface parameter, resulting in denial-of-service (DoS) conditions on an affected device.
CVE-2023-22918 A post-authentication information exposure vulnerability in the CGI program of Zyxel ATP series firmware versions 4.32 through 5.35, USG FLEX series firmware versions 4.50 through 5.35, USG FLEX 50(W) firmware versions 4.16 through 5.35, USG20(W)-VPN firmware versions 4.16 through 5.35, VPN series firmware versions 4.30 through 5.35, NWA110AX firmware version 6.50(ABTG.2) and earlier versions, WAC500 firmware version 6.50(ABVS.0) and earlier versions, and WAX510D firmware version 6.50(ABTF.2) and earlier versions, which could allow a remote authenticated attacker to retrieve encrypted information of the administrator on an affected device.
CVE-2023-22913 A post-authentication command injection vulnerability in the &#8220;account_operator.cgi&#8221; CGI program of Zyxel USG FLEX series firmware versions 4.50 through 5.35, and VPN series firmware versions 4.30 through 5.35, which could allow a remote authenticated attacker to modify device configuration data, resulting in denial-of-service (DoS) conditions on an affected device.
CVE-2023-22813 A device API endpoint was missing access controls on Western Digital My Cloud OS 5 iOS and Anroid Mobile Apps, My Cloud Home iOS and Android Mobile Apps, SanDisk ibi iOS and Android Mobile Apps, My Cloud OS 5 Web App, My Cloud Home Web App and the SanDisk ibi Web App. Due to a permissive CORS policy and missing authentication requirement for private IPs, a remote attacker on the same network as the device could obtain device information by convincing a victim user to visit an attacker-controlled server and issue a cross-site request. This issue affects My Cloud OS 5 Mobile App: before 4.21.0; My Cloud Home Mobile App: before 4.21.0; ibi Mobile App: before 4.21.0; My Cloud OS 5 Web App: before 4.26.0-6126; My Cloud Home Web App: before 4.26.0-6126; ibi Web App: before 4.26.0-6126.
CVE-2023-22804 LS ELECTRIC XBC-DN32U with operating system version 01.80 is missing authentication to create users on the PLC. This could allow an attacker to create and use an account with elevated privileges and take control of the device.
CVE-2023-22761 Authenticated remote command injection vulnerabilities exist in the ArubaOS web-based management interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system. This allows an attacker to fully compromise the underlying operating system on the device running ArubaOS.
CVE-2023-22760 Authenticated remote command injection vulnerabilities exist in the ArubaOS web-based management interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system. This allows an attacker to fully compromise the underlying operating system on the device running ArubaOS.
CVE-2023-22759 Authenticated remote command injection vulnerabilities exist in the ArubaOS web-based management interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system. This allows an attacker to fully compromise the underlying operating system on the device running ArubaOS.
CVE-2023-22758 Authenticated remote command injection vulnerabilities exist in the ArubaOS web-based management interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system. This allows an attacker to fully compromise the underlying operating system on the device running ArubaOS.
CVE-2023-22620 An issue was discovered in SecurePoint UTM before 12.2.5.1. The firewall's endpoint at /spcgi.cgi allows sessionid information disclosure via an invalid authentication attempt. This can afterwards be used to bypass the device's authentication and get access to the administrative interface.
CVE-2023-22357 Active debug code exists in OMRON CP1L-EL20DR-D all versions, which may lead to a command that is not specified in FINS protocol being executed without authentication. A remote unauthenticated attacker may read/write in arbitrary area of the device memory, which may lead to overwriting the firmware, causing a denial-of-service (DoS) condition, and/or arbitrary code execution.
CVE-2023-20274 A vulnerability in the installer script of Cisco AppDynamics PHP Agent could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient permissions that are set by the PHP Agent Installer on the PHP Agent install directory. An attacker could exploit this vulnerability by modifying objects in the PHP Agent install directory, which would run with the same privileges as PHP. A successful exploit could allow a lower-privileged attacker to elevate their privileges to root on an affected device.
CVE-2023-20266 A vulnerability in Cisco Emergency Responder, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an authenticated, remote attacker to elevate privileges to root on an affected device. This vulnerability exists because the application does not properly restrict the files that are being used for upgrades. An attacker could exploit this vulnerability by providing a crafted upgrade file. A successful exploit could allow the attacker to elevate privileges to root. To exploit this vulnerability, the attacker must have valid platform administrator credentials on an affected device.
CVE-2023-20265 A vulnerability in the web-based management interface of a small subset of Cisco IP Phones could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by persuading a user of an affected interface to view a page containing malicious HTML or script content. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid credentials to access the web-based management interface of the affected device.
CVE-2023-20259 A vulnerability in an API endpoint of multiple Cisco Unified Communications Products could allow an unauthenticated, remote attacker to cause high CPU utilization, which could impact access to the web-based management interface and cause delays with call processing. This API is not used for device management and is unlikely to be used in normal operations of the device. This vulnerability is due to improper API authentication and incomplete validation of the API request. An attacker could exploit this vulnerability by sending a crafted HTTP request to a specific API on the device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to high CPU utilization, which could negatively impact user traffic and management access. When the attack stops, the device will recover without manual intervention.
CVE-2023-20253 A vulnerability in the command line interface (cli) management interface of Cisco SD-WAN vManage could allow an authenticated, local attacker to bypass authorization and allow the attacker to roll back the configuration on vManage controllers and edge router device. This vulnerability is due to improper access control in the cli-management interface of an affected system. An attacker with low-privilege (read only) access to the cli could exploit this vulnerability by sending a request to roll back the configuration on for other controller and devices managed by an affected system. A successful exploit could allow the attacker to to roll back the configuration on for other controller and devices managed by an affected system.
CVE-2023-20250 A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper validation of requests that are sent to the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary code with root privileges on an affected device. To exploit this vulnerability, the attacker must have valid Administrator credentials on the affected device.
CVE-2023-20243 A vulnerability in the RADIUS message processing feature of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause the affected system to stop processing RADIUS packets. This vulnerability is due to improper handling of certain RADIUS accounting requests. An attacker could exploit this vulnerability by sending a crafted authentication request to a network access device (NAD) that uses Cisco ISE for authentication, authorization, and accounting (AAA). This would eventually result in the NAD sending a RADIUS accounting request packet to Cisco ISE. An attacker could also exploit this vulnerability by sending a crafted RADIUS accounting request packet to Cisco ISE directly if the RADIUS shared secret is known. A successful exploit could allow the attacker to cause the RADIUS process to unexpectedly restart, resulting in authentication or authorization timeouts and denying legitimate users access to the network or service. Clients already authenticated to the network would not be affected. Note: To recover the ability to process RADIUS packets, a manual restart of the affected Policy Service Node (PSN) may be required. For more information, see the Details ["#details"] section of this advisory.
CVE-2023-20241 Multiple vulnerabilities in Cisco Secure Client Software, formerly AnyConnect Secure Mobility Client, could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected system. These vulnerabilities are due to an out-of-bounds memory read from Cisco Secure Client Software. An attacker could exploit these vulnerabilities by logging in to an affected device at the same time that another user is accessing Cisco Secure Client on the same system, and then sending crafted packets to a port on that local host. A successful exploit could allow the attacker to crash the VPN Agent service, causing it to be unavailable to all users of the system. To exploit these vulnerabilities, the attacker must have valid credentials on a multi-user system.
CVE-2023-20240 Multiple vulnerabilities in Cisco Secure Client Software, formerly AnyConnect Secure Mobility Client, could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected system. These vulnerabilities are due to an out-of-bounds memory read from Cisco Secure Client Software. An attacker could exploit these vulnerabilities by logging in to an affected device at the same time that another user is accessing Cisco Secure Client on the same system, and then sending crafted packets to a port on that local host. A successful exploit could allow the attacker to crash the VPN Agent service, causing it to be unavailable to all users of the system. To exploit these vulnerabilities, the attacker must have valid credentials on a multi-user system.
CVE-2023-20236 A vulnerability in the iPXE boot function of Cisco IOS XR software could allow an authenticated, local attacker to install an unverified software image on an affected device. This vulnerability is due to insufficient image verification. An attacker could exploit this vulnerability by manipulating the boot parameters for image verification during the iPXE boot process on an affected device. A successful exploit could allow the attacker to boot an unverified software image on the affected device.
CVE-2023-20235 A vulnerability in the on-device application development workflow feature for the Cisco IOx application hosting infrastructure in Cisco IOS XE Software could allow an authenticated, remote attacker to access the underlying operating system as the root user. This vulnerability exists because Docker containers with the privileged runtime option are not blocked when they are in application development mode. An attacker could exploit this vulnerability by using the Docker CLI to access an affected device. The application development workflow is meant to be used only on development systems and not in production systems.
CVE-2023-20234 A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to create a file or overwrite any file on the filesystem of an affected device, including system files. The vulnerability occurs because there is no validation of parameters when a specific CLI command is used. An attacker could exploit this vulnerability by authenticating to an affected device and using the command at the CLI. A successful exploit could allow the attacker to overwrite any file on the disk of the affected device, including system files. The attacker must have valid administrative credentials on the affected device to exploit this vulnerability.
CVE-2023-20231 A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary Cisco IOS XE Software CLI commands with level 15 privileges. Note: This vulnerability is exploitable only if the attacker obtains the credentials for a Lobby Ambassador account. This account is not configured by default.
CVE-2023-20229 A vulnerability in the CryptoService function of Cisco Duo Device Health Application for Windows could allow an authenticated, local attacker with low privileges to conduct directory traversal attacks and overwrite arbitrary files on an affected system. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by executing a directory traversal attack on an affected host. A successful exploit could allow an attacker to use a cryptographic key to overwrite arbitrary files with SYSTEM-level privileges, resulting in a denial of service (DoS) condition or data loss on the affected system.
CVE-2023-20224 A vulnerability in the CLI of Cisco ThousandEyes Enterprise Agent, Virtual Appliance installation type, could allow an authenticated, local attacker to elevate privileges to root on an affected device. This vulnerability is due to insufficient input validation of user-supplied CLI arguments. An attacker could exploit this vulnerability by authenticating to an affected device and using crafted commands at the prompt. A successful exploit could allow the attacker to execute arbitrary commands as root. The attacker must have valid credentials on the affected device.
CVE-2023-20221 A vulnerability in the web-based management interface of Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack against a user of the web-based management interface of an affected system. This vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform a factory reset of the affected device, resulting in a Denial of Service (DoS) condition.
CVE-2023-20220 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. To exploit these vulnerabilities, the attacker must have valid device credentials, but does not need Administrator privileges. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device, including on the underlying operating system, which could also affect the availability of the device.
CVE-2023-20219 Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device including the underlying operating system which could also affect the availability of the device.
CVE-2023-20217 A vulnerability in the CLI of Cisco ThousandEyes Enterprise Agent, Virtual Appliance installation type, could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient input validation by the operating system CLI. An attacker could exploit this vulnerability by issuing certain commands using sudo. A successful exploit could allow the attacker to view arbitrary files as root on the underlying operating system. The attacker must have valid credentials on the affected device.
CVE-2023-20210 A vulnerability in Cisco BroadWorks could allow an authenticated, local attacker to elevate privileges to the root user on an affected device. The vulnerability is due to insufficient input validation by the operating system CLI. An attacker could exploit this vulnerability by issuing a crafted command to the affected system. A successful exploit could allow the attacker to execute commands as the root user. To exploit this vulnerability, an attacker must have valid BroadWorks administrative privileges on the affected device.
CVE-2023-20209 A vulnerability in the web-based management interface of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker with read-write privileges on the application to perform a command injection attack that could result in remote code execution on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to establish a remote shell with root privileges.
CVE-2023-20208 A vulnerability in the web-based management interface of Cisco ISE could allow an authenticated, remote attacker to conduct an XSS attack against a user of the web-based management interface of an affected device.
CVE-2023-20205 Multiple vulnerabilities in the web-based management interface of Cisco Prime Infrastructure and Cisco Evolved Programmable Network Manager (EPNM) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface on an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by persuading a user of an affected interface to view a page containing malicious HTML or script content. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, the attacker must have valid credentials to access the web-based management interface of the affected device.
CVE-2023-20203 Multiple vulnerabilities in the web-based management interface of Cisco Prime Infrastructure and Cisco Evolved Programmable Network Manager (EPNM) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface on an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by persuading a user of an affected interface to view a page containing malicious HTML or script content. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, the attacker must have valid credentials to access the web-based management interface of the affected device.
CVE-2023-20201 Multiple vulnerabilities in the web-based management interface of Cisco Prime Infrastructure and Cisco Evolved Programmable Network Manager (EPNM) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface on an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by persuading a user of an affected interface to view a page containing malicious HTML or script content. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, the attacker must have valid credentials to access the web-based management interface of the affected device.
CVE-2023-20200 A vulnerability in the Simple Network Management Protocol (SNMP) service of Cisco FXOS Software for Firepower 4100 Series and Firepower 9300 Security Appliances and of Cisco UCS 6300 Series Fabric Interconnects could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to the improper handling of specific SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects all supported SNMP versions. To exploit this vulnerability through SNMPv2c or earlier, an attacker must know the SNMP community string that is configured on an affected device. To exploit this vulnerability through SNMPv3, the attacker must have valid credentials for an SNMP user who is configured on the affected device.
CVE-2023-20199 A vulnerability in Cisco Duo Two-Factor Authentication for macOS could allow an authenticated, physical attacker to bypass secondary authentication and access an affected macOS device. This vulnerability is due to the incorrect handling of responses from Cisco Duo when the application is configured to fail open. An attacker with primary user credentials could exploit this vulnerability by attempting to authenticate to an affected device. A successful exploit could allow the attacker to access the affected device without valid permission.
CVE-2023-20196 Two vulnerabilities in Cisco ISE could allow an authenticated, remote attacker to upload arbitrary files to an affected device. To exploit these vulnerabilities, an attacker must have valid Administrator credentials on the affected device. These vulnerabilities are due to improper validation of files that are uploaded to the web-based management interface. An attacker could exploit these vulnerabilities by uploading a crafted file to an affected device. A successful exploit could allow the attacker to store malicious files in specific directories on the device. The attacker could later use those files to conduct additional attacks, including executing arbitrary code on the affected device with root privileges.
CVE-2023-20195 Two vulnerabilities in Cisco ISE could allow an authenticated, remote attacker to upload arbitrary files to an affected device. To exploit these vulnerabilities, an attacker must have valid Administrator credentials on the affected device. These vulnerabilities are due to improper validation of files that are uploaded to the web-based management interface. An attacker could exploit these vulnerabilities by uploading a crafted file to an affected device. A successful exploit could allow the attacker to store malicious files in specific directories on the device. The attacker could later use those files to conduct additional attacks, including executing arbitrary code on the affected device with root privileges.
CVE-2023-20194 A vulnerability in the ERS API of Cisco ISE could allow an authenticated, remote attacker to read arbitrary files on the underlying operating system of an affected device. To exploit this vulnerability, an attacker must have valid Administrator-level privileges on the affected device. This vulnerability is due to improper privilege management in the ERS API. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to elevate their privileges beyond the sphere of their intended access level, which would allow them to obtain sensitive information from the underlying operating system. Note: The ERS is not enabled by default. To verify the status of the ERS API in the Admin GUI, choose Administration > Settings > API Settings > API Service Settings.
CVE-2023-20193 A vulnerability in the Embedded Service Router (ESR) of Cisco ISE could allow an authenticated, local attacker to read, write, or delete arbitrary files on the underlying operating system and escalate their privileges to root. To exploit this vulnerability, an attacker must have valid Administrator-level privileges on the affected device. This vulnerability is due to improper privilege management in the ESR console. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to elevate their privileges to root and read, write, or delete arbitrary files from the underlying operating system of the affected device. Note: The ESR is not enabled by default and must be licensed. To verify the status of the ESR in the Admin GUI, choose Administration > Settings > Protocols > IPSec.
CVE-2023-20188 A vulnerability in the web-based management interface of Cisco Small Business 200 Series Smart Switches, Cisco Small Business 300 Series Managed Switches, and Cisco Small Business 500 Series Stackable Managed Switches could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by persuading a user of an affected interface to view a page containing malicious HTML or script content. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker would need to have valid credentials to access the web-based management interface of the affected device. Cisco has not released software updates to address this vulnerability.
CVE-2023-20186 A vulnerability in the Authentication, Authorization, and Accounting (AAA) feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to bypass command authorization and copy files to or from the file system of an affected device using the Secure Copy Protocol (SCP). This vulnerability is due to incorrect processing of SCP commands in AAA command authorization checks. An attacker with valid credentials and level 15 privileges could exploit this vulnerability by using SCP to connect to an affected device from an external machine. A successful exploit could allow the attacker to obtain or change the configuration of the affected device and put files on or retrieve files from the affected device.
CVE-2023-20175 A vulnerability in a specific Cisco ISE CLI command could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit this vulnerability, an attacker must have valid Read-only-level privileges or higher on the affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.
CVE-2023-20174 Multiple vulnerabilities in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to read arbitrary files or conduct a server-side request forgery (SSRF) attack through an affected device. To exploit these vulnerabilities, an attacker must have valid Administrator credentials on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2023-20173 Multiple vulnerabilities in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to read arbitrary files or conduct a server-side request forgery (SSRF) attack through an affected device. To exploit these vulnerabilities, an attacker must have valid Administrator credentials on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2023-20172 Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to delete or read arbitrary files on the underlying operating system. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2023-20171 Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to delete or read arbitrary files on the underlying operating system. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2023-20170 A vulnerability in a specific Cisco ISE CLI command could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit this vulnerability, an attacker must have valid Administrator-level privileges on the affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.
CVE-2023-20168 A vulnerability in TACACS+ and RADIUS remote authentication for Cisco NX-OS Software could allow an unauthenticated, local attacker to cause an affected device to unexpectedly reload. This vulnerability is due to incorrect input validation when processing an authentication attempt if the directed request option is enabled for TACACS+ or RADIUS. An attacker could exploit this vulnerability by entering a crafted string at the login prompt of an affected device. A successful exploit could allow the attacker to cause the affected device to unexpectedly reload, resulting in a denial of service (DoS) condition.
CVE-2023-20167 Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform path traversal attacks on the underlying operating system to either elevate privileges to root or read arbitrary files. To exploit these vulnerabilities, an attacker must have valid Administrator credentials on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2023-20166 Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform path traversal attacks on the underlying operating system to either elevate privileges to root or read arbitrary files. To exploit these vulnerabilities, an attacker must have valid Administrator credentials on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2023-20164 Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2023-20163 Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2023-20153 Multiple vulnerabilities in specific Cisco Identity Services Engine (ISE) CLI commands could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid Administrator privileges on the affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.
CVE-2023-20152 Multiple vulnerabilities in specific Cisco Identity Services Engine (ISE) CLI commands could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid Administrator privileges on the affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.
CVE-2023-20135 A vulnerability in Cisco IOS XR Software image verification checks could allow an authenticated, local attacker to execute arbitrary code on the underlying operating system. This vulnerability is due to a time-of-check, time-of-use (TOCTOU) race condition when an install query regarding an ISO image is performed during an install operation that uses an ISO image. An attacker could exploit this vulnerability by modifying an ISO image and then carrying out install requests in parallel. A successful exploit could allow the attacker to execute arbitrary code on an affected device.
CVE-2023-20128 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities.
CVE-2023-20126 A vulnerability in the web-based management interface of Cisco SPA112 2-Port Phone Adapters could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to a missing authentication process within the firmware upgrade function. An attacker could exploit this vulnerability by upgrading an affected device to a crafted version of firmware. A successful exploit could allow the attacker to execute arbitrary code on the affected device with full privileges. Cisco has not released firmware updates to address this vulnerability.
CVE-2023-20124 A vulnerability in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. This vulnerability is due to improper validation of user input within incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface. A successful exploit could allow the attacker to gain root-level privileges and access unauthorized data. To exploit this vulnerability, an attacker would need to have valid administrative credentials on the affected device. Cisco has not released software updates that address this vulnerability.
CVE-2023-20123 A vulnerability in the offline access mode of Cisco Duo Two-Factor Authentication for macOS and Duo Authentication for Windows Logon and RDP could allow an unauthenticated, physical attacker to replay valid user session credentials and gain unauthorized access to an affected macOS or Windows device. This vulnerability exists because session credentials do not properly expire. An attacker could exploit this vulnerability by replaying previously used multifactor authentication (MFA) codes to bypass MFA protection. A successful exploit could allow the attacker to gain unauthorized access to the affected device.
CVE-2023-20118 A vulnerability in the web-based management interface of Cisco Small Business Routers RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. This vulnerability is due to improper validation of user input within incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface. A successful exploit could allow the attacker to gain root-level privileges and access unauthorized data. To exploit this vulnerability, an attacker would need to have valid administrative credentials on the affected device. Cisco has not and will not release software updates that address this vulnerability.
CVE-2023-20117 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities.
CVE-2023-20116 A vulnerability in the Administrative XML Web Service (AXL) API of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of user-supplied input to the web UI of the Self Care Portal. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.
CVE-2023-20115 A vulnerability in the SFTP server implementation for Cisco Nexus 3000 Series Switches and 9000 Series Switches in standalone NX-OS mode could allow an authenticated, remote attacker to download or overwrite files from the underlying operating system of an affected device. This vulnerability is due to a logic error when verifying the user role when an SFTP connection is opened to an affected device. An attacker could exploit this vulnerability by connecting and authenticating via SFTP as a valid, non-administrator user. A successful exploit could allow the attacker to read or overwrite files from the underlying operating system with the privileges of the authenticated user. There are workarounds that address this vulnerability.
CVE-2023-20111 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to access sensitive information. This vulnerability is due to the improper storage of sensitive information within the web-based management interface. An attacker could exploit this vulnerability by logging in to the web-based management interface and viewing hidden fields within the application. A successful exploit could allow the attacker to access sensitive information, including device entry credentials, that could aid the attacker in further attacks.
CVE-2023-20109 A vulnerability in the Cisco Group Encrypted Transport VPN (GET VPN) feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker who has administrative control of either a group member or a key server to execute arbitrary code on an affected device or cause the device to crash. This vulnerability is due to insufficient validation of attributes in the Group Domain of Interpretation (GDOI) and G-IKEv2 protocols of the GET VPN feature. An attacker could exploit this vulnerability by either compromising an installed key server or modifying the configuration of a group member to point to a key server that is controlled by the attacker. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a denial of service (DoS) condition. For more information, see the Details ["#details"] section of this advisory.
CVE-2023-20108 A vulnerability in the XCP Authentication Service of the Cisco Unified Communications Manager IM &amp; Presence Service (Unified CM IM&amp;P) could allow an unauthenticated, remote attacker to cause a temporary service outage for all Cisco Unified CM IM&amp;P users who are attempting to authenticate to the service, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted login message to the affected device. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing new users from successfully authenticating. Exploitation of this vulnerability does not impact Cisco Unified CM IM&amp;P users who were authenticated prior to an attack.
CVE-2023-20106 Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to delete or read arbitrary files on the underlying operating system. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2023-20105 A vulnerability in the change password functionality of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker with Read-only credentials to elevate privileges to Administrator on an affected system. This vulnerability is due to incorrect handling of password change requests. An attacker could exploit this vulnerability by authenticating to the application as a Read-only user and sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to alter the passwords of any user on the system, including an administrative user, and then impersonate that user. Note: Cisco Expressway Series refers to the Expressway Control (Expressway-C) device and the Expressway Edge (Expressway-E) device.
CVE-2023-20103 A vulnerability in Cisco Secure Network Analytics could allow an authenticated, remote attacker to execute arbitrary code as a root user on an affected device. This vulnerability is due to insufficient validation of user input to the web interface. An attacker could exploit this vulnerability by uploading a crafted file to an affected device. A successful exploit could allow the attacker to execute code on the affected device. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.
CVE-2023-20102 A vulnerability in the web-based management interface of Cisco Secure Network Analytics could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system. This vulnerability is due to insufficient sanitization of user-provided data that is parsed into system memory. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system as the administrator user.
CVE-2023-20087 Multiple vulnerabilities in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to download arbitrary files from the filesystem of an affected device. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to download arbitrary files from the underlying filesystem of the affected device.
CVE-2023-20082 A vulnerability in Cisco IOS XE Software for Cisco Catalyst 9300 Series Switches could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to the device to execute persistent code at boot time and break the chain of trust. This vulnerability is due to errors that occur when retrieving the public release key that is used for image signature verification. An attacker could exploit this vulnerability by modifying specific variables in the Serial Peripheral Interface (SPI) flash memory of an affected device. A successful exploit could allow the attacker to execute persistent code on the underlying operating system. Note: In Cisco IOS XE Software releases 16.11.1 and later, the complexity of an attack using this vulnerability is high. However, an attacker with level-15 privileges could easily downgrade the Cisco IOS XE Software on a device to a release that would lower the attack complexity.
CVE-2023-20077 Multiple vulnerabilities in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to download arbitrary files from the filesystem of an affected device. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to download arbitrary files from the underlying filesystem of the affected device.
CVE-2023-20069 A vulnerability in the web-based management interface of Cisco Prime Infrastructure and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by persuading a user of an affected interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker would need to have valid credentials to access the web-based management interface of the affected device.
CVE-2023-20065 A vulnerability in the Cisco IOx application hosting subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to root on an affected device. This vulnerability is due to insufficient restrictions on the hosted application. An attacker could exploit this vulnerability by logging in to and then escaping the Cisco IOx application container. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges.
CVE-2023-20063 A vulnerability in the inter-device communication mechanisms between devices that are running Cisco Firepower Threat Defense (FTD) Software and devices that are running Cisco Firepower Management (FMC) Software could allow an authenticated, local attacker to execute arbitrary commands with root permissions on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by accessing the expert mode of an affected device and submitting specific commands to a connected system. A successful exploit could allow the attacker to execute arbitrary code in the context of an FMC device if the attacker has administrative privileges on an associated FTD device. Alternatively, a successful exploit could allow the attacker to execute arbitrary code in the context of an FTD device if the attacker has administrative privileges on an associated FMC device.
CVE-2023-20059 A vulnerability in the implementation of the Cisco Network Plug-and-Play (PnP) agent of Cisco DNA Center could allow an authenticated, remote attacker to view sensitive information in clear text. The attacker must have valid low-privileged user credentials. This vulnerability is due to improper role-based access control (RBAC) with the integration of PnP. An attacker could exploit this vulnerability by authenticating to the device and sending a query to an internal API. A successful exploit could allow the attacker to view sensitive information in clear text, which could include configuration files.
CVE-2023-20056 A vulnerability in the management CLI of Cisco access point (AP) software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to cause an affected device to reload spontaneously, resulting in a DoS condition.
CVE-2023-20055 A vulnerability in the management API of Cisco DNA Center could allow an authenticated, remote attacker to elevate privileges in the context of the web-based management interface on an affected device. This vulnerability is due to the unintended exposure of sensitive information. An attacker could exploit this vulnerability by inspecting the responses from the API. Under certain circumstances, a successful exploit could allow the attacker to access the API with the privileges of a higher-level user account. To successfully exploit this vulnerability, the attacker would need at least valid Observer credentials.
CVE-2023-20050 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of the currently logged-in user.
CVE-2023-20048 A vulnerability in the web services interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute certain unauthorized configuration commands on a Firepower Threat Defense (FTD) device that is managed by the FMC Software. This vulnerability is due to insufficient authorization of configuration commands that are sent through the web service interface. An attacker could exploit this vulnerability by authenticating to the FMC web services interface and sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to execute certain configuration commands on the targeted FTD device. To successfully exploit this vulnerability, an attacker would need valid credentials on the FMC Software.
CVE-2023-20046 A vulnerability in the key-based SSH authentication feature of Cisco StarOS Software could allow an authenticated, remote attacker to elevate privileges on an affected device. This vulnerability is due to insufficient validation of user-supplied credentials. An attacker could exploit this vulnerability by sending a valid low-privileged SSH key to an affected device from a host that has an IP address that is configured as the source for a high-privileged user account. A successful exploit could allow the attacker to log in to the affected device through SSH as a high-privileged user. There are workarounds that address this vulnerability.
CVE-2023-20045 A vulnerability in the web-based management interface of Cisco Small Business RV160 and RV260 Series VPN Routers could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on the affected device. To exploit this vulnerability, the attacker must have valid Administrator-level credentials on the affected device.
CVE-2023-20044 A vulnerability in Cisco CX Cloud Agent of could allow an authenticated, local attacker to elevate their privileges. This vulnerability is due to insecure file permissions. An attacker could exploit this vulnerability by persuading support to update settings which call the insecure script. A successful exploit could allow the attacker to take complete control of the affected device.
CVE-2023-20043 A vulnerability in Cisco CX Cloud Agent of could allow an authenticated, local attacker to elevate their privileges. This vulnerability is due to insecure file permissions. An attacker could exploit this vulnerability by calling the script with sudo. A successful exploit could allow the attacker to take complete control of the affected device.
CVE-2023-20040 A vulnerability in the NETCONF service of Cisco Network Services Orchestrator (NSO) could allow an authenticated, remote attacker to cause a denial of service (DoS) on an affected system that is running as the root user. To exploit this vulnerability, the attacker must be a member of the admin group. This vulnerability exists because user-supplied input is not properly validated when NETCONF is used to upload packages to an affected device. An attacker could exploit this vulnerability by uploading a specially crafted package file. A successful exploit could allow the attacker to write crafted files to arbitrary locations on the filesystem or delete arbitrary files from the filesystem of an affected device, resulting in a DoS condition. Note: By default, during install, Cisco NSO will be set up to run as the root user unless the --run-as-user option is used.
CVE-2023-20035 A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges. This vulnerability is due to insufficient input validation by the system CLI. An attacker with privileges to run commands could exploit this vulnerability by first authenticating to an affected device using either local terminal access or a management shell interface and then submitting crafted input to the system CLI. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges. An attacker with limited user privileges could use this vulnerability to gain complete control over the system. Note: For additional information about specific impacts, see the Details section of this advisory.
CVE-2023-20030 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to access sensitive information, conduct a server-side request forgery (SSRF) attack through an affected device, or negatively impact the responsiveness of the web-based management interface itself. This vulnerability is due to improper handling of XML External Entity (XXE) entries when parsing certain XML files. An attacker could exploit this vulnerability by uploading a crafted XML file that contains references to external entities. A successful exploit could allow the attacker to retrieve files from the local system, resulting in the disclosure of confidential information. A successful exploit could also cause the web application to perform arbitrary HTTP requests on behalf of the attacker or consume memory resources to reduce the availability of the web-based management interface. To successfully exploit this vulnerability, an attacker would need valid Super Admin or Policy Admin credentials.
CVE-2023-20029 A vulnerability in the Meraki onboarding feature of Cisco IOS XE Software could allow an authenticated, local attacker to gain root level privileges on an affected device. This vulnerability is due to insufficient memory protection in the Meraki onboarding feature of an affected device. An attacker could exploit this vulnerability by modifying the Meraki registration parameters. A successful exploit could allow the attacker to elevate privileges to root.
CVE-2023-20026 A vulnerability in the web-based management interface of Cisco Small Business Routers RV042 Series could allow an authenticated, remote attacker to inject arbitrary commands on an affected device. This vulnerability is due to improper validation of user input fields within incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device.
CVE-2023-20025 A vulnerability in the web-based management interface of Cisco Small Business RV042 Series Routers could allow an unauthenticated, remote attacker to bypass authentication on the affected device. This vulnerability is due to incorrect user input validation of incoming HTTP packets. An attacker could exploit this vulnerability by sending crafted requests to the web-based management interface. A successful exploit could allow the attacker to gain root privileges on the affected device.
CVE-2023-20023 Multiple vulnerabilities in specific Cisco Identity Services Engine (ISE) CLI commands could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid Administrator privileges on the affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.
CVE-2023-20022 Multiple vulnerabilities in specific Cisco Identity Services Engine (ISE) CLI commands could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid Administrator privileges on the affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.
CVE-2023-20021 Multiple vulnerabilities in specific Cisco Identity Services Engine (ISE) CLI commands could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid Administrator privileges on the affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.
CVE-2023-20018 A vulnerability in the web-based management interface of Cisco IP Phone 7800 and 8800 Series Phones could allow an unauthenticated, remote attacker to bypass authentication on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to access certain parts of the web interface that would normally require authentication.
CVE-2023-20017 Multiple vulnerabilities in Cisco Intersight Private Virtual Appliance could allow an authenticated, remote attacker to execute arbitrary commands using root-level privileges. The attacker would need to have Administrator privileges on the affected device to exploit these vulnerabilities. These vulnerabilities are due to insufficient input validation when extracting uploaded software packages. An attacker could exploit these vulnerabilities by authenticating to an affected device and uploading a crafted software package. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges.
CVE-2023-20015 A vulnerability in the CLI of Cisco Firepower 4100 Series, Cisco Firepower 9300 Security Appliances, and Cisco UCS 6200, 6300, 6400, and 6500 Series Fabric Interconnects could allow an authenticated, local attacker to inject unauthorized commands. This vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute unauthorized commands within the CLI. An attacker with Administrator privileges could also execute arbitrary commands on the underlying operating system of Cisco UCS 6400 and 6500 Series Fabric Interconnects with root-level privileges.
CVE-2023-20013 Multiple vulnerabilities in Cisco Intersight Private Virtual Appliance could allow an authenticated, remote attacker to execute arbitrary commands using root-level privileges. The attacker would need to have Administrator privileges on the affected device to exploit these vulnerabilities. These vulnerabilities are due to insufficient input validation when extracting uploaded software packages. An attacker could exploit these vulnerabilities by authenticating to an affected device and uploading a crafted software package. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges.
CVE-2023-20012 A vulnerability in the CLI console login authentication of Cisco Nexus 9300-FX3 Series Fabric Extender (FEX) when used in UCS Fabric Interconnect deployments could allow an unauthenticated attacker with physical access to bypass authentication. This vulnerability is due to the improper implementation of the password validation function. An attacker could exploit this vulnerability by logging in to the console port on an affected device. A successful exploit could allow the attacker to bypass authentication and execute a limited set of commands local to the FEX, which could cause a device reboot and denial of service (DoS) condition.
CVE-2023-20009 A vulnerability in the Web UI and administrative CLI of the Cisco Secure Email Gateway (ESA) and Cisco Secure Email and Web Manager (SMA) could allow an authenticated remote attacker and or authenticated local attacker to escalate their privilege level and gain root access. The attacker has to have a valid user credential with at least a [[privilege of operator - validate actual name]]. The vulnerability is due to the processing of a specially crafted SNMP configuration file. An attacker could exploit this vulnerability by authenticating to the targeted device and uploading a specially crafted SNMP configuration file that when uploaded could allow for the execution of commands as root. An exploit could allow the attacker to gain root access on the device.
CVE-2023-20008 A vulnerability in the CLI of Cisco TelePresence CE and RoomOS Software could allow an authenticated, local attacker to overwrite arbitrary files on the local system of an affected device. This vulnerability is due to improper access controls on files that are in the local file system. An attacker could exploit this vulnerability by placing a symbolic link in a specific location on the local file system of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the affected device.
CVE-2023-20007 A vulnerability in the web-based management interface of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code or cause the web-based management process on the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The attacker must have valid administrator credentials. This vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the web-based management process to restart, resulting in a DoS condition.
CVE-2023-20003 A vulnerability in the social login configuration option for the guest users of Cisco Business Wireless Access Points (APs) could allow an unauthenticated, adjacent attacker to bypass social login authentication. This vulnerability is due to a logic error with the social login implementation. An attacker could exploit this vulnerability by attempting to authenticate to an affected device. A successful exploit could allow the attacker to access the Guest Portal without authentication.
CVE-2023-20002 A vulnerability in Cisco TelePresence CE and RoomOS Software could allow an authenticated, local attacker to bypass access controls and conduct an SSRF attack through an affected device. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to a user of the web application. A successful exploit could allow the attacker to send arbitrary network requests that are sourced from the affected system.
CVE-2023-1935 ROC800-Series RTU devices are vulnerable to an authentication bypass, which could allow an attacker to gain unauthorized access to data or control of the device and cause a denial-of-service condition.
CVE-2023-1862 Cloudflare WARP client for Windows (up to v2023.3.381.0) allowed a malicious actor to remotely access the warp-svc.exe binary due to an insufficient access control policy on an IPC Named Pipe. This would have enabled an attacker to trigger WARP connect and disconnect commands, as well as obtaining network diagnostics and application configuration from the target's device. It is important to note that in order to exploit this, a set of requirements would need to be met, such as the target's device must've been reachable on port 445, allowed authentication with NULL sessions or otherwise having knowledge of the target's credentials.
CVE-2023-1620 Multiple WAGO devices in multiple versions may allow an authenticated remote attacker with high privileges to DoS the device by sending a specifically crafted packet to the CODESYS V2 runtime.
CVE-2023-1619 Multiple WAGO devices in multiple versions may allow an authenticated remote attacker with high privileges to DoS the device by sending a malformed packet.
CVE-2023-1327 Netgear RAX30 (AX2400), prior to version 1.0.6.74, was affected by an authentication bypass vulnerability, allowing an unauthenticated attacker to gain administrative access to the device's web management interface by resetting the admin password.
CVE-2023-1257 An attacker with physical access to the affected Moxa UC Series devices can initiate a restart of the device and gain access to its BIOS. Command line options can then be altered, allowing the attacker to access the terminal. From the terminal, the attacker can modify the device&#8217;s authentication files to create a new user and gain full access to the system.
CVE-2023-1145 Delta Electronics InfraSuite Device Master versions prior to 1.0.5 are affected by a deserialization vulnerability targeting the Device-DataCollect service, which could allow deserialization of requests prior to authentication, resulting in remote code execution.
CVE-2023-1142 In Delta Electronics InfraSuite Device Master versions prior to 1.0.5, an attacker could use URL decoding to retrieve system files, credentials, and bypass authentication resulting in privilege escalation.
CVE-2023-1139 Delta Electronics InfraSuite Device Master versions prior to 1.0.5 are affected by a deserialization vulnerability targeting the Device-gateway service, which could allow deserialization of requests prior to authentication, resulting in remote code execution.
CVE-2023-1136 In Delta Electronics InfraSuite Device Master versions prior to 1.0.5, an unauthenticated attacker could generate a valid token, which would lead to authentication bypass.
CVE-2023-0888 An improper neutralization of directives in dynamically evaluated code vulnerability in the WiFi Battery embedded web server in versions L90/U70 and L92/U92 can be used to gain administrative access to the WiFi communication module. An authenticated user, having access to both the medical device WiFi network (such as a biomedical engineering staff member) and the specific B.Braun Battery Pack SP with WiFi web server credentials, could get administrative (root) access on the infusion pump communication module. This could be used as a vector to start further attacks
CVE-2023-0773 The vulnerability exists in Uniview IP Camera due to identification and authentication failure at its web-based management interface. A remote attacker could exploit this vulnerability by sending specially crafted HTTP requests to the vulnerable device. Successful exploitation of this vulnerability could allow the attacker to gain complete control of the targeted device.
CVE-2023-0750 Yellobrik PEC-1864 implements authentication checks via javascript in the frontend interface. When the device can be accessed over the network an attacker could bypass authentication. This would allow an attacker to : - Change the password, resulting in a DOS of the users - Change the streaming source, compromising the integrity of the stream - Change the streaming destination, compromising the confidentiality of the stream This issue affects Yellowbrik: PEC 1864. No patch has been issued by the manufacturer as this model was discontinued.
CVE-2023-0432 The web configuration service of the affected device contains an authenticated command injection vulnerability. It can be used to execute system commands on the operating system (OS) from the device in the context of the user "root." If the attacker has credentials for the web service, then the device could be fully compromised.
CVE-2023-0352 The Akuvox E11 password recovery webpage can be accessed without authentication, and an attacker could download the device key file. An attacker could then use this page to reset the password back to the default.
CVE-2023-0127 A command injection vulnerability in the firmware_update command, in the device's restricted telnet interface, allows an authenticated attacker to execute arbitrary commands as root.
CVE-2023-0005 A vulnerability in Palo Alto Networks PAN-OS software enables an authenticated administrator to expose the plaintext values of secrets stored in the device configuration and encrypted API keys.
CVE-2022-47210 The default console presented to users over telnet (when enabled) is restricted to a subset of commands. Commands issued at this console, however, appear to be fed directly into a system call or other similar function. This allows any authenticated user to execute arbitrary commands on the device.
CVE-2022-47208 The &#8220;puhttpsniff&#8221; service, which runs by default, is susceptible to command injection due to improperly sanitized user input. An unauthenticated attacker on the same network segment as the router can execute arbitrary commands on the device without authentication.
CVE-2022-46169 Cacti is an open source platform which provides a robust and extensible operational monitoring and fault management framework for users. In affected versions a command injection vulnerability allows an unauthenticated user to execute arbitrary code on a server running Cacti, if a specific data source was selected for any monitored device. The vulnerability resides in the `remote_agent.php` file. This file can be accessed without authentication. This function retrieves the IP address of the client via `get_client_addr` and resolves this IP address to the corresponding hostname via `gethostbyaddr`. After this, it is verified that an entry within the `poller` table exists, where the hostname corresponds to the resolved hostname. If such an entry was found, the function returns `true` and the client is authorized. This authorization can be bypassed due to the implementation of the `get_client_addr` function. The function is defined in the file `lib/functions.php` and checks serval `$_SERVER` variables to determine the IP address of the client. The variables beginning with `HTTP_` can be arbitrarily set by an attacker. Since there is a default entry in the `poller` table with the hostname of the server running Cacti, an attacker can bypass the authentication e.g. by providing the header `Forwarded-For: <TARGETIP>`. This way the function `get_client_addr` returns the IP address of the server running Cacti. The following call to `gethostbyaddr` will resolve this IP address to the hostname of the server, which will pass the `poller` hostname check because of the default entry. After the authorization of the `remote_agent.php` file is bypassed, an attacker can trigger different actions. One of these actions is called `polldata`. The called function `poll_for_data` retrieves a few request parameters and loads the corresponding `poller_item` entries from the database. If the `action` of a `poller_item` equals `POLLER_ACTION_SCRIPT_PHP`, the function `proc_open` is used to execute a PHP script. The attacker-controlled parameter `$poller_id` is retrieved via the function `get_nfilter_request_var`, which allows arbitrary strings. This variable is later inserted into the string passed to `proc_open`, which leads to a command injection vulnerability. By e.g. providing the `poller_id=;id` the `id` command is executed. In order to reach the vulnerable call, the attacker must provide a `host_id` and `local_data_id`, where the `action` of the corresponding `poller_item` is set to `POLLER_ACTION_SCRIPT_PHP`. Both of these ids (`host_id` and `local_data_id`) can easily be bruteforced. The only requirement is that a `poller_item` with an `POLLER_ACTION_SCRIPT_PHP` action exists. This is very likely on a productive instance because this action is added by some predefined templates like `Device - Uptime` or `Device - Polling Time`. This command injection vulnerability allows an unauthenticated user to execute arbitrary commands if a `poller_item` with the `action` type `POLLER_ACTION_SCRIPT_PHP` (`2`) is configured. The authorization bypass should be prevented by not allowing an attacker to make `get_client_addr` (file `lib/functions.php`) return an arbitrary IP address. This could be done by not honoring the `HTTP_...` `$_SERVER` variables. If these should be kept for compatibility reasons it should at least be prevented to fake the IP address of the server running Cacti. This vulnerability has been addressed in both the 1.2.x and 1.3.x release branches with `1.2.23` being the first release containing the patch.
CVE-2022-45937 A vulnerability has been identified in APOGEE PXC Compact (BACnet) (All versions < V3.5.5), APOGEE PXC Compact (P2 Ethernet) (All versions < V2.8.20), APOGEE PXC Modular (BACnet) (All versions < V3.5.5), APOGEE PXC Modular (P2 Ethernet) (All versions < V2.8.20), TALON TC Compact (BACnet) (All versions < V3.5.5), TALON TC Modular (BACnet) (All versions < V3.5.5). A low privilege authenticated attacker with network access to the integrated web server could download sensitive information from the device containing user account credentials.
CVE-2022-45877 OpenHarmony-v3.1.4 and prior versions had an vulnerability. PIN code is transmitted to the peer device in plain text during cross-device authentication, which reduces the difficulty of man-in-the-middle attacks.
CVE-2022-45860 A weak authentication vulnerability [CWE-1390] in FortiNAC-F version 7.2.0, FortiNAC version 9.4.2 and below, 9.2 all versions, 9.1 all versions, 8.8 all versions, 8.7 all versions in device registration page may allow an unauthenticated attacker to perform password spraying attacks with an increased chance of success.
CVE-2022-45853 The privilege escalation vulnerability in the Zyxel GS1900-8 firmware version V2.70(AAHH.3) and the GS1900-8HP firmware version V2.70(AAHI.3) could allow an authenticated, local attacker with administrator privileges to execute some system commands as 'root' on a vulnerable device via SSH.
CVE-2022-45441 A cross-site scripting (XSS) vulnerability in Zyxel NBG-418N v2 firmware versions prior to V1.00(AARP.13)C0, which could allow an attacker to store malicious scripts in the Logs page of the GUI on a vulnerable device. A successful XSS attack could force an authenticated user to execute the stored malicious scripts and then result in a denial-of-service (DoS) condition when the user visits the Logs page of the GUI on the device.
CVE-2022-45440 A vulnerability exists in the FTP server of the Zyxel AX7501-B0 firmware prior to V5.17(ABPC.3)C0, which processes symbolic links on external storage media. A local authenticated attacker with administrator privileges could abuse this vulnerability to access the root file system by creating a symbolic link on external storage media, such as a USB flash drive, and then logging into the FTP server on a vulnerable device.
CVE-2022-45138 The configuration backend of the web-based management can be used by unauthenticated users, although only authenticated users should be able to use the API. The vulnerability allows an unauthenticated attacker to read and set several device parameters that can lead to full compromise of the device.
CVE-2022-45093 A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 1). An authenticated remote attacker with access to the Web Based Management (443/tcp) of the affected product as well as with access to the SFTP server of the affected product (22/tcp), could potentially read and write arbitrary files from and to the device's file system. An attacker might leverage this to trigger remote code execution on the affected component.
CVE-2022-45092 A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 1). An authenticated remote attacker with access to the Web Based Management (443/tcp) of the affected product, could potentially read and write arbitrary files from and to the device's file system. An attacker might leverage this to trigger remote code execution on the affected component.
CVE-2022-44620 Improper authentication vulnerability in UDR-JA1604/UDR-JA1608/UDR-JA1616 firmware versions 71x10.1.107112.43A and earlier allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter the device settings.
CVE-2022-44606 OS command injection vulnerability in UDR-JA1604/UDR-JA1608/UDR-JA1616 firmware versions 71x10.1.107112.43A and earlier allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter the device settings.
CVE-2022-43704 The Sinilink XY-WFT1 WiFi Remote Thermostat, running firmware 1.3.6, allows an attacker to bypass the intended requirement to communicate using MQTT. It is possible to replay Sinilink aka SINILINK521 protocol (udp/1024) commands interfacing directly with the target device. This, in turn, allows for an attack to control the onboard relay without requiring authentication via the mobile application. This might result in an unacceptable temperature within the target device's physical environment.
CVE-2022-43555 Ivanti Avalanche Printer Device Service Missing Authentication Local Privilege Escalation Vulnerability
CVE-2022-43554 Ivanti Avalanche Smart Device Service Missing Authentication Local Privilege Escalation Vulnerability
CVE-2022-43546 A vulnerability has been identified in POWER METER SICAM Q100 (All versions < V2.50), POWER METER SICAM Q100 (All versions < V2.50), POWER METER SICAM Q100 (All versions < V2.50), POWER METER SICAM Q100 (All versions < V2.50), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10). Affected devices do not properly validate the EndTime-parameter in requests to the web interface on port 443/tcp. This could allow an authenticated remote attacker to crash the device (followed by an automatic reboot) or to execute arbitrary code on the device.
CVE-2022-43545 A vulnerability has been identified in POWER METER SICAM Q100 (All versions < V2.50), POWER METER SICAM Q100 (All versions < V2.50), POWER METER SICAM Q100 (All versions < V2.50), POWER METER SICAM Q100 (All versions < V2.50), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10). Affected devices do not properly validate the RecordType-parameter in requests to the web interface on port 443/tcp. This could allow an authenticated remote attacker to crash the device (followed by an automatic reboot) or to execute arbitrary code on the device.
CVE-2022-43464 Hidden functionality vulnerability in UDR-JA1604/UDR-JA1608/UDR-JA1616 firmware versions 71x10.1.107112.43A and earlier allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter the device settings.
CVE-2022-43439 A vulnerability has been identified in POWER METER SICAM Q100 (All versions < V2.50), POWER METER SICAM Q100 (All versions < V2.50), POWER METER SICAM Q100 (All versions < V2.50), POWER METER SICAM Q100 (All versions < V2.50), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P850 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10), SICAM P855 (All versions < V3.10). Affected devices do not properly validate the Language-parameter in requests to the web interface on port 443/tcp. This could allow an authenticated remote attacker to crash the device (followed by an automatic reboot) or to execute arbitrary code on the device.
CVE-2022-43390 A command injection vulnerability in the CGI program of Zyxel NR7101 firmware prior to V1.15(ACCC.3)C0, which could allow an authenticated attacker to execute some OS commands on a vulnerable device by sending a crafted HTTP request.
CVE-2022-41688 Delta Electronics InfraSuite Device Master versions 00.00.01a and prior lack proper authentication for functions that create and modify user groups. An attacker could provide malicious serialized objects that could run these functions without authentication to create a new user and add them to the administrator group.
CVE-2022-41644 Delta Electronics InfraSuite Device Master versions 00.00.01a and prior lacks authentication for a function that changes group privileges. An attacker could use this to create a denial-of-service state or escalate their own privileges.
CVE-2022-41489 WAYOS LQ_09 22.03.17V was discovered to contain a Cross-Site Request Forgery (CSRF) which allows attackers to send crafted requests to the server from the affected device. This vulnerability is exploitable due to a lack of authentication in the component Usb_upload.htm.
CVE-2022-41333 An uncontrolled resource consumption vulnerability [CWE-400] in FortiRecorder version 6.4.3 and below, 6.0.11 and below login authentication mechanism may allow an unauthenticated attacker to make the device unavailable via crafted GET requests.
CVE-2022-4098 Multiple Wiesemann&Theis products of the ComServer Series are prone to an authentication bypass through IP spoofing. After a user logged in to the WBM of the Com-Server an unauthenticated attacker in the same subnet can obtain the session ID and through IP spoofing change arbitrary settings by crafting modified HTTP Get requests. This may result in a complete takeover of the device.
CVE-2022-40966 Authentication bypass vulnerability in multiple Buffalo network devices allows a network-adjacent attacker to bypass authentication and access the device. The affected products/versions are as follows: WCR-300 firmware Ver. 1.87 and earlier, WHR-HP-G300N firmware Ver. 2.00 and earlier, WHR-HP-GN firmware Ver. 1.87 and earlier, WPL-05G300 firmware Ver. 1.88 and earlier, WRM-D2133HP firmware Ver. 2.85 and earlier, WRM-D2133HS firmware Ver. 2.96 and earlier, WTR-M2133HP firmware Ver. 2.85 and earlier, WTR-M2133HS firmware Ver. 2.96 and earlier, WXR-1900DHP firmware Ver. 2.50 and earlier, WXR-1900DHP2 firmware Ver. 2.59 and earlier, WXR-1900DHP3 firmware Ver. 2.63 and earlier, WXR-5950AX12 firmware Ver. 3.40 and earlier, WXR-6000AX12B firmware Ver. 3.40 and earlier, WXR-6000AX12S firmware Ver. 3.40 and earlier, WZR-300HP firmware Ver. 2.00 and earlier, WZR-450HP firmware Ver. 2.00 and earlier, WZR-600DHP firmware Ver. 2.00 and earlier, WZR-900DHP firmware Ver. 1.15 and earlier, WZR-1750DHP2 firmware Ver. 2.31 and earlier, WZR-HP-AG300H firmware Ver. 1.76 and earlier, WZR-HP-G302H firmware Ver. 1.86 and earlier, WEM-1266 firmware Ver. 2.85 and earlier, WEM-1266WP firmware Ver. 2.85 and earlier, WLAE-AG300N firmware Ver. 1.86 and earlier, FS-600DHP firmware Ver. 3.40 and earlier, FS-G300N firmware Ver. 3.14 and earlier, FS-HP-G300N firmware Ver. 3.33 and earlier, FS-R600DHP firmware Ver. 3.40 and earlier, BHR-4GRV firmware Ver. 2.00 and earlier, DWR-HP-G300NH firmware Ver. 1.84 and earlier, DWR-PG firmware Ver. 1.83 and earlier, HW-450HP-ZWE firmware Ver. 2.00 and earlier, WER-A54G54 firmware Ver. 1.43 and earlier, WER-AG54 firmware Ver. 1.43 and earlier, WER-AM54G54 firmware Ver. 1.43 and earlier, WER-AMG54 firmware Ver. 1.43 and earlier, WHR-300 firmware Ver. 2.00 and earlier, WHR-300HP firmware Ver. 2.00 and earlier, WHR-AM54G54 firmware Ver. 1.43 and earlier, WHR-AMG54 firmware Ver. 1.43 and earlier, WHR-AMPG firmware Ver. 1.52 and earlier, WHR-G firmware Ver. 1.49 and earlier, WHR-G300N firmware Ver. 1.65 and earlier, WHR-G301N firmware Ver. 1.87 and earlier, WHR-G54S firmware Ver. 1.43 and earlier, WHR-G54S-NI firmware Ver. 1.24 and earlier, WHR-HP-AMPG firmware Ver. 1.43 and earlier, WHR-HP-G firmware Ver. 1.49 and earlier, WHR-HP-G54 firmware Ver. 1.43 and earlier, WLI-H4-D600 firmware Ver. 1.88 and earlier, WS024BF firmware Ver. 1.60 and earlier, WS024BF-NW firmware Ver. 1.60 and earlier, WXR-1750DHP firmware Ver. 2.60 and earlier, WXR-1750DHP2 firmware Ver. 2.60 and earlier, WZR-1166DHP firmware Ver. 2.18 and earlier, WZR-1166DHP2 firmware Ver. 2.18 and earlier, WZR-1750DHP firmware Ver. 2.30 and earlier, WZR2-G300N firmware Ver. 1.55 and earlier, WZR-450HP-CWT firmware Ver. 2.00 and earlier, WZR-450HP-UB firmware Ver. 2.00 and earlier, WZR-600DHP2 firmware Ver. 1.15 and earlier, WZR-600DHP3 firmware Ver. 2.19 and earlier, WZR-900DHP2 firmware Ver. 2.19 and earlier, WZR-AGL300NH firmware Ver. 1.55 and earlier, WZR-AMPG144NH firmware Ver. 1.49 and earlier, WZR-AMPG300NH firmware Ver. 1.51 and earlier, WZR-D1100H firmware Ver. 2.00 and earlier, WZR-G144N firmware Ver. 1.48 and earlier, WZR-G144NH firmware Ver. 1.48 and earlier, WZR-HP-G300NH firmware Ver. 1.84 and earlier, WZR-HP-G301NH firmware Ver. 1.84 and earlier, WZR-HP-G450H firmware Ver. 1.90 and earlier, WZR-S1750DHP firmware Ver. 2.32 and earlier, WZR-S600DHP firmware Ver. 2.19 and earlier, and WZR-S900DHP firmware Ver. 2.19 and earlier.
CVE-2022-40799 Data Integrity Failure in 'Backup Config' in D-Link DNR-322L <= 2.60B15 allows an authenticated attacker to execute OS level commands on the device.
CVE-2022-40703 CWE-302 Authentication Bypass by Assumed-Immutable Data in AliveCor Kardia App version 5.17.1-754993421 and prior on Android allows an unauthenticated attacker with physical access to the Android device containing the app to bypass application authentication and alter information in the app.
CVE-2022-40602 A flaw in the Zyxel LTE3301-M209 firmware verisons prior to V1.00(ABLG.6)C0 could allow a remote attacker to access the device using an improper pre-configured password if the remote administration feature has been enabled by an authenticated administrator.
CVE-2022-40202 The database backup function in Delta Electronics InfraSuite Device Master Versions 00.00.01a and prior lacks proper authentication. An attacker could provide malicious serialized objects which, when deserialized, could activate an opcode for a backup scheduling function without authentication. This function allows the user to designate all function arguments and the file to be executed. This could allow the attacker to start any new process and achieve remote code execution.
CVE-2022-38377 An improper access control vulnerability [CWE-284] in FortiManager 7.2.0, 7.0.0 through 7.0.3, 6.4.0 through 6.4.7, 6.2.0 through 6.2.9, 6.0.0 through 6.0.11 and FortiAnalyzer 7.2.0, 7.0.0 through 7.0.3, 6.4.0 through 6.4.8, 6.2.0 through 6.2.10, 6.0.0 through 6.0.12 may allow a remote and authenticated admin user assigned to a specific ADOM to access other ADOMs information such as device information and dashboard information.
CVE-2022-37680 An improper authentication for critical function issue in Hitachi Kokusai Electric Network products for monitoring system (Camera, Decoder and Encoder) and bellow allows attckers to remotely reboot the device via a crafted POST request to the endpoint /ptipupgrade.cgi. Security information ID hitachi-sec-2022-001 contains fixes for the issue.
CVE-2022-36385 A threat actor with momentary access to the device can plug in a USB drive and perform a malicious firmware update, resulting in permanent changes to device functionality. No authentication or controls are in place to prevent a threat actor from maliciously modifying firmware and performing a drive-by attack to load the firmware on any CMS8000 device.
CVE-2022-36328 Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability that could allow an attacker to create arbitrary shares on arbitrary directories and exfiltrate sensitive files, passwords, users and device configurations was discovered in Western Digital My Cloud Home, My Cloud Home Duo, SanDisk ibi and Western Digital My Cloud OS 5 devices. This can only be exploited once an attacker gains root privileges on the devices using an authentication bypass issue or another vulnerability.This issue affects My Cloud Home and My Cloud Home Duo: before 9.4.0-191; ibi: before 9.4.0-191; My Cloud OS 5: before 5.26.202.
CVE-2022-36267 In Airspan AirSpot 5410 version 0.3.4.1-4 and under there exists a Unauthenticated remote command injection vulnerability. The ping functionality can be called without user authentication when crafting a malicious http request by injecting code in one of the parameters allowing for remote code execution. This vulnerability is exploited via the binary file /home/www/cgi-bin/diagnostics.cgi that accepts unauthenticated requests and unsanitized data. As a result, a malicious actor can craft a specific request and interact remotely with the device.
CVE-2022-36265 In Airspan AirSpot 5410 version 0.3.4.1-4 and under there exists a Hidden system command web page. After performing a reverse engineering of the firmware, it was discovered that a hidden page not listed in the administration management interface allows a user to execute Linux commands on the device with root privileges. An authenticated malicious threat actor can use this page to fully compromise the device.
CVE-2022-35843 An authentication bypass by assumed-immutable data vulnerability [CWE-302] in the FortiOS SSH login component 7.2.0, 7.0.0 through 7.0.7, 6.4.0 through 6.4.9, 6.2 all versions, 6.0 all versions and FortiProxy SSH login component 7.0.0 through 7.0.5, 2.0.0 through 2.0.10, 1.2.0 all versions may allow a remote and unauthenticated attacker to login into the device via sending specially crafted Access-Challenge response from the Radius server.
CVE-2022-3575 Frauscher Sensortechnik GmbH FDS102 for FAdC R2 and FAdCi R2 v2.8.0 to v2.9.1 are vulnerable to malicious code upload without authentication by using the configuration upload function. This could lead to a complete compromise of the FDS102 device.
CVE-2022-35733 Missing authentication for critical function vulnerability in UNIMO Technology digital video recorders (UDR-JA1004/JA1008/JA1016 firmware versions v1.0.20.13 and earlier, and UDR-JA1016 firmware versions v2.0.20.13 and earlier) allows a remote unauthenticated attacker to execute an arbitrary OS command by sending a specially crafted request to the affected device web interface.
CVE-2022-35401 An authentication bypass vulnerability exists in the get_IFTTTTtoken.cgi functionality of Asus RT-AX82U 3.0.0.4.386_49674-ge182230. A specially-crafted HTTP request can lead to full administrative access to the device. An attacker would need to send a series of HTTP requests to exploit this vulnerability.
CVE-2022-34150 The main MiCODUS MV720 GPS tracker web server has an authenticated insecure direct object reference vulnerability on endpoint and parameter device IDs, which accept arbitrary device IDs without further verification.
CVE-2022-33944 The main MiCODUS MV720 GPS tracker web server has an authenticated insecure direct object references vulnerability on endpoint and POST parameter &#8220;Device ID,&#8221; which accepts arbitrary device IDs.
CVE-2022-33202 Authentication bypass vulnerability in the setup screen of L2Blocker(on-premise) Ver4.8.5 and earlier and L2Blocker(Cloud) Ver4.8.5 and earlier allows an adjacent attacker to perform an unauthorized login and obtain the stored information or cause a malfunction of the device by using alternative paths or channels for Sensor.
CVE-2022-33138 A vulnerability has been identified in SIMATIC MV540 H (All versions < V3.3), SIMATIC MV540 S (All versions < V3.3), SIMATIC MV550 H (All versions < V3.3), SIMATIC MV550 S (All versions < V3.3), SIMATIC MV560 U (All versions < V3.3), SIMATIC MV560 X (All versions < V3.3). Affected devices do not perform authentication for several web API endpoints. This could allow an unauthenticated remote attacker to read and download data from the device.
CVE-2022-32747 A CWE-290: Authentication Bypass by Spoofing vulnerability exists that could cause legitimate users to be locked out of devices or facilitate backdoor account creation by spoofing a device on the local network. Affected Products: EcoStruxure&#8482; Cybersecurity Admin Expert (CAE) (Versions prior to 2.2)
CVE-2022-32514 A CWE-287: Improper Authentication vulnerability exists that could allow an attacker to gain control of the device when logging into a web page. Affected Products: C-Bus Network Automation Controller - LSS5500NAC (Versions prior to V1.10.0), Wiser for C-Bus Automation Controller - LSS5500SHAC (Versions prior to V1.10.0), Clipsal C-Bus Network Automation Controller - 5500NAC (Versions prior to V1.10.0), Clipsal Wiser for C-Bus Automation Controller - 5500SHAC (Versions prior to V1.10.0), SpaceLogic C-Bus Network Automation Controller - 5500NAC2 (Versions prior to V1.10.0), SpaceLogic C-Bus Application Controller - 5500AC2 (Versions prior to V1.10.0)
CVE-2022-32290 The client in Northern.tech Mender 3.2.0, 3.2.1, and 3.2.2 has Incorrect Access Control. It listens on a random, unprivileged TCP port and exposes an HTTP proxy to facilitate API calls from additional client components running on the device. However, it listens on all network interfaces instead of only the localhost interface. Therefore, any client on the same network can connect to this TCP port and send HTTP requests. The Mender Client will forward these requests to the Mender Server. Additionally, if mTLS is set up, the Mender Client will connect to the Mender Server using the device's client certificate, making it possible for the attacker to bypass mTLS authentication and send requests to the Mender Server without direct access to the client certificate and related private key. Accessing the HTTP proxy from the local network doesn't represent a direct threat, because it doesn't expose any device or server-specific data. However, it increases the attack surface and can be a potential vector to exploit other vulnerabilities both on the Client and the Server.
CVE-2022-3188 Dataprobe iBoot-PDU FW versions prior to 1.42.06162022 contain a vulnerability where unauthenticated users could open PHP index pages without authentication and download the history file from the device; the history file includes the latest actions completed by specific users.
CVE-2022-31486 An authenticated attacker can send a specially crafted route to the &#8220;edit_route.cgi&#8221; binary and have it execute shell commands. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.303 for the LP series and 1.297 for the EP series. An attacker with this level of access on the device can monitor all communications sent to and from this device, modify onboard relays, change configuration files, or cause the device to become unstable.
CVE-2022-31076 KubeEdge is built upon Kubernetes and extends native containerized application orchestration and device management to hosts at the Edge. In affected versions a malicious message can crash CloudCore by triggering a nil-pointer dereference in the UDS Server. Since the UDS Server only communicates with the CSI Driver on the cloud side, the attack is limited to the local host network. As such, an attacker would already need to be an authenticated user of the Cloud. Additionally it will be affected only when users turn on the unixsocket switch in the config file cloudcore.yaml. This bug has been fixed in Kubeedge 1.11.0, 1.10.1, and 1.9.3. Users should update to these versions to resolve the issue. Users unable to upgrade should sisable the unixsocket switch of CloudHub in the config file cloudcore.yaml.
CVE-2022-30317 Honeywell Experion LX through 2022-05-06 has Missing Authentication for a Critical Function. According to FSCT-2022-0055, there is a Honeywell Experion LX Control Data Access (CDA) EpicMo protocol with unauthenticated functionality issue. The affected components are characterized as: Honeywell Control Data Access (CDA) EpicMo (55565/TCP). The potential impact is: Firmware manipulation, Denial of service. The Honeywell Experion LX Distributed Control System (DCS) utilizes the Control Data Access (CDA) EpicMo protocol (55565/TCP) for device diagnostics and maintenance purposes. This protocol does not have any authentication features, allowing any attacker capable of communicating with the ports in question to invoke (a subset of) desired functionality. There is no authentication functionality on the protocol in question. An attacker capable of invoking the protocols' functionalities could issue firmware download commands potentially allowing for firmware manipulation and reboot devices causing denial of service.
CVE-2022-30124 An improper authentication vulnerability exists in Rocket.Chat Mobile App <4.14.1.22788 that allowed an attacker with physical access to a mobile device to bypass local authentication (PIN code).
CVE-2022-29948 Due to an insecure design, the Lepin EP-KP001 flash drive through KP001_V19 is vulnerable to an authentication bypass attack that enables an attacker to gain access to the stored encrypted data. Normally, the encrypted disk partition with this data is unlocked by entering the correct passcode (6 to 14 digits) via the keypad and pressing the Unlock button. This authentication is performed by an unknown microcontroller. By replacing this microcontroller on a target device with one from an attacker-controlled Lepin EP-KP001 whose passcode is known, it is possible to successfully unlock the target device and read the stored data in cleartext.
CVE-2022-29879 A vulnerability has been identified in SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00). The web based management interface of affected devices does not employ special access protection for certain internal developer views. This could allow authenticated users to access critical device information.
CVE-2022-29872 A vulnerability has been identified in SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00). Affected devices do not properly validate parameters of POST requests. This could allow an authenticated attacker to set the device to a denial of service state or to control the program counter and, thus, execute arbitrary code on the device.
CVE-2022-29838 Improper Authentication vulnerability in the encrypted volumes and auto mount features of Western Digital My Cloud devices allows insecure direct access to the drive information in the case of a device reset. This issue affects: Western Digital My Cloud My Cloud versions prior to 5.25.124 on Linux.
CVE-2022-29836 Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability was discovered via an HTTP API on Western Digital My Cloud Home; My Cloud Home Duo; and SanDisk ibi devices that could allow an attacker to abuse certain parameters to point to random locations on the file system. This could also allow the attacker to initiate the installation of custom packages at these locations. This can only be exploited once the attacker has been authenticated to the device. This issue affects: Western Digital My Cloud Home and My Cloud Home Duo versions prior to 8.11.0-113 on Linux; SanDisk ibi versions prior to 8.11.0-113 on Linux.
CVE-2022-29561 A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.0), RUGGEDCOM ROX MX5000RE (All versions < V2.16.0), RUGGEDCOM ROX RX1400 (All versions < V2.16.0), RUGGEDCOM ROX RX1500 (All versions < V2.16.0), RUGGEDCOM ROX RX1501 (All versions < V2.16.0), RUGGEDCOM ROX RX1510 (All versions < V2.16.0), RUGGEDCOM ROX RX1511 (All versions < V2.16.0), RUGGEDCOM ROX RX1512 (All versions < V2.16.0), RUGGEDCOM ROX RX1524 (All versions < V2.16.0), RUGGEDCOM ROX RX1536 (All versions < V2.16.0), RUGGEDCOM ROX RX5000 (All versions < V2.16.0). The web interface of the affected devices are vulnerable to Cross-Site Request Forgery attacks. By tricking an authenticated victim user to click a malicious link, an attacker could perform arbitrary actions on the device on behalf of the victim user.
CVE-2022-28790 Improper authentication in Link to Windows Service prior to version 2.3.04.1 allows attacker to lock the device. The patch adds proper caller signature check logic.
CVE-2022-26838 Path traversal vulnerability in Importing Mobile Device Data of Cybozu Remote Service 3.1.2 allows a remote authenticated attacker to cause a denial-of-service (DoS) condition.
CVE-2022-2662 Sequi PortBloque S has a improper authentication issues which may allow an attacker to bypass the authentication process and gain user-level access to the device.
CVE-2022-26413 A command injection vulnerability in the CGI program of Zyxel VMG3312-T20A firmware version 5.30(ABFX.5)C0 could allow a local authenticated attacker to execute arbitrary OS commands on a vulnerable device via a LAN interface.
CVE-2022-25837 Bluetooth® Pairing in Bluetooth Core Specification v1.0B through v5.3 may permit an unauthenticated MITM to acquire credentials with two pairing devices via adjacent access when at least one device supports BR/EDR Secure Connections pairing and the other BR/EDR Legacy PIN code pairing if the MITM negotiates BR/EDR Secure Simple Pairing in Secure Connections mode using the Passkey association model with the pairing Initiator and BR/EDR Legacy PIN code pairing with the pairing Responder and brute forces the Passkey entered by the user into the Responder as a 6-digit PIN code. The MITM attacker can use the identified PIN code value as the Passkey value to complete authentication with the Initiator via Bluetooth pairing method confusion.
CVE-2022-25753 A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. The handling of arguments such as IP addresses in the CLI of affected devices is prone to buffer overflows. This could allow an authenticated remote attacker to execute arbitrary code on the device.
CVE-2022-2569 The affected device stores sensitive information in cleartext, which may allow an authenticated user to access session data stored in the OAuth database belonging to legitimate users
CVE-2022-2474 Authentication is currently unsupported in Haas Controller version 100.20.000.1110 when using the &#8220;Ethernet Q Commands&#8221; service, which allows any user on the same network segment as the controller (even while connected remotely) to access the service and write unauthorized macros to the device.
CVE-2022-24628 An issue was discovered in AudioCodes Device Manager Express through 7.8.20002.47752. It is authenticated SQL injection in the id parameter of IPPhoneFirmwareEdit.php.
CVE-2022-24190 The /device/acceptBind end-point for Ourphoto App version 1.4.1 does not require authentication or authorization. The user_token header is not implemented or present on this end-point. An attacker can send a request to bind their account to any users picture frame, then send a POST request to accept their own bind request, without the end-users approval or interaction.
CVE-2022-23822 In this physical attack, an attacker may potentially exploit the Zynq-7000 SoC First Stage Boot Loader (FSBL) by bypassing authentication and loading a malicious image onto the device. This in turn may further allow the attacker to perform additional attacks such as such as using the device as a decryption oracle. An anticipated mitigation via a 2022.1 patch will resolve the issue.
CVE-2022-23729 When the device is in factory state, it can be access the shell without adb authentication process. The LG ID is LVE-SMP-210010.
CVE-2022-23600 fleet is an open source device management, built on osquery. Versions prior to 4.9.1 expose a limited ability to spoof SAML authentication with missing audience verification. This impacts deployments using SAML SSO in two specific cases: 1. A malicious or compromised Service Provider (SP) could reuse the SAML response to log into Fleet as a user -- only if the user has an account with the same email in Fleet, _and_ the user signs into the malicious SP via SAML SSO from the same Identity Provider (IdP) configured with Fleet. 2. A user with an account in Fleet could reuse a SAML response intended for another SP to log into Fleet. This is only a concern if the user is blocked from Fleet in the IdP, but continues to have an account in Fleet. If the user is blocked from the IdP entirely, this cannot be exploited. Fleet 4.9.1 resolves this issue. Users unable to upgrade should: Reduce the length of sessions on your IdP to reduce the window for malicious re-use, Limit the amount of SAML Service Providers/Applications used by user accounts with access to Fleet, and When removing access to Fleet in the IdP, delete the Fleet user from Fleet as well.
CVE-2022-23158 Wyse Device Agent version 14.6.1.4 and below contain a sensitive data exposure vulnerability. A local authenticated user with standard privilege could potentially exploit this vulnerability and provide incorrect port information and get connected to valid WMS server
CVE-2022-23157 Wyse Device Agent version 14.6.1.4 and below contain a sensitive data exposure vulnerability. A authenticated malicious user could potentially exploit this vulnerability in order to view sensitive information from the WMS Server.
CVE-2022-23156 Wyse Device Agent version 14.6.1.4 and below contain an Improper Authentication vulnerability. A malicious user could potentially exploit this vulnerability by providing invalid input in order to obtain a connection to WMS server.
CVE-2022-23141 ZXMP M721 has an information leak vulnerability. Since the serial port authentication on the ZBOOT interface is not effective although it is enabled, an attacker could use this vulnerability to log in to the device to obtain sensitive information.
CVE-2022-23102 A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V2.0). Affected products contain an open redirect vulnerability. An attacker could trick a valid authenticated user to the device into clicking a malicious link there by leading to phishing attacks.
CVE-2022-23009 On BIG-IQ Centralized Management 8.x before 8.1.0, an authenticated administrative role user on a BIG-IQ managed BIG-IP device can access other BIG-IP devices managed by the same BIG-IQ system. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
CVE-2022-22988 File and directory permissions have been corrected to prevent unintended users from modifying or accessing resources. It would be more difficult for an authenticated attacker to now traverse through the files and directories. This can only be exploited once an attacker has already found a way to get authenticated access to the device.
CVE-2022-22671 An authentication issue was addressed with improved state management. This issue is fixed in iOS 15.4 and iPadOS 15.4. A person with physical access to an iOS device may be able to access photos from the lock screen.
CVE-2022-22652 The GSMA authentication panel could be presented on the lock screen. The issue was resolved by requiring device unlock to interact with the GSMA authentication panel. This issue is fixed in iOS 15.4 and iPadOS 15.4. A person with physical access may be able to view and modify the carrier account information and settings from the lock screen.
CVE-2022-22566 Select Dell Client Commercial and Consumer platforms contain a pre-boot direct memory access (DMA) vulnerability. An authenticated attacker with physical access to the system may potentially exploit this vulnerability in order to execute arbitrary code on the device.
CVE-2022-22259 There is an improper authentication vulnerability in FLMG-10 10.0.1.0(H100SP22C00). Successful exploitation of this vulnerability may lead to a control of the victim device.
CVE-2022-22245 A Path Traversal vulnerability in the J-Web component of Juniper Networks Junos OS allows an authenticated attacker to upload arbitrary files to the device by bypassing validation checks built into Junos OS. The attacker should not be able to execute the file due to validation checks built into Junos OS. Successful exploitation of this vulnerability could lead to loss of filesystem integrity. This issue affects Juniper Networks Junos OS: all versions prior to 19.1R3-S9; 19.2 versions prior to 19.2R3-S6; 19.3 versions prior to 19.3R3-S7; 19.4 versions prior to 19.4R3-S9; 20.1 versions prior to 20.1R3-S5; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S2; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R2-S2, 21.3R3; 21.4 versions prior to 21.4R1-S2, 21.4R2-S1, 21.4R3; 22.1 versions prior to 22.1R1-S1, 22.1R2.
CVE-2022-22239 An Execution with Unnecessary Privileges vulnerability in Management Daemon (mgd) of Juniper Networks Junos OS Evolved allows a locally authenticated attacker with low privileges to escalate their privileges on the device and potentially remote systems. This vulnerability allows a locally authenticated attacker with access to the ssh operational command to escalate their privileges on the system to root, or if there is user interaction on the local device to potentially escalate privileges on a remote system to root. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S5-EVO; 21.1-EVO versions prior to 21.1R3-EVO; 21.2-EVO versions prior to 21.2R2-S1-EVO, 21.2R3-EVO; 21.3-EVO versions prior to 21.3R2-EVO. This issue does not affect Juniper Networks Junos OS.
CVE-2022-22234 An Improper Preservation of Consistency Between Independent Representations of Shared State vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). If the device is very busy for example while executing a series of show commands on the CLI one or more SFPs might not be detected anymore. The system then changes its state to "unplugged" which is leading to traffic impact and at least a partial DoS. Once the system is less busy the port states return to their actual value. Indicators of compromise are log messages about unplugged SFPs and corresponding syspld messages without any physical or environmental cause. These can be checked by issuing the following commands: user@device# show log messages | match unplugged %PFE-6: fpc0 sfp-0/1/2 SFP unplugged %PFE-6: fpc0 sfp-0/1/3 SFP unplugged The following log messages will also be seen when this issue happens: fpc0 Error tvp_drv_syspld_read: syspld read failed for address <address> fpc0 Error[-1]:tvp_optics_presence_get - Syspld read failed for port <pic/port> fpc0 optics pres failed(-1) for pic <pic> port <port> fpc0 tvp_drv_syspld_read: i2c access retry count 200 This issue affects Juniper Networks Junos OS on EX2300 Series, EX3400 Series: All versions prior to 18.4R3-S11; 19.1 versions prior to 19.1R3-S9; 19.2 versions prior to 19.2R1-S9, 19.2R3-S5; 19.3 versions prior to 19.3R3-S6; 19.4 versions prior to 19.4R2-S7, 19.4R3-S8; 20.1 versions prior to 20.1R3-S4; 20.2 versions prior to 20.2R3-S4; 20.3 versions prior to 20.3R3-S4; 20.4 versions prior to 20.4R3-S3; 21.1 versions prior to 21.1R3-S1; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2; 21.4 versions prior to 21.4R2.
CVE-2022-22221 An Improper Neutralization of Special Elements vulnerability in the download manager of Juniper Networks Junos OS on SRX Series and EX Series allows a locally authenticated attacker with low privileges to take full control over the device. One aspect of this vulnerability is that the attacker needs to be able to execute any of the "request ..." or "show system download ..." commands. This issue affects Juniper Networks Junos OS on SRX Series and EX Series: All versions prior to 19.2R1-S9, 19.2R3-S5; 19.3 versions prior to 19.3R3-S6; 19.4 versions prior to 19.4R3-S8; 20.1 versions prior to 20.1R3-S4; 20.2 versions prior to 20.2R3-S4; 20.3 versions prior to 20.3R3-S3; 20.4 versions prior to 20.4R3-S2, 20.4R3-S3; 21.1 versions prior to 21.1R3-S1; 21.2 versions prior to 21.2R2-S2, 21.2R3; 21.3 versions prior to 21.3R2, 21.3R3; 21.4 versions prior to 21.4R1-S1, 21.4R2.
CVE-2022-22215 A Missing Release of File Descriptor or Handle after Effective Lifetime vulnerability in plugable authentication module (PAM) of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). It is possible that after the termination of a gRPC connection the respective/var/run/<pid>.env file is not getting deleted which if occurring repeatedly can cause inode exhaustion. Inode exhaustion can present itself in two different ways: 1. The following log message can be observed: host kernel: pid <pid> (<process>), uid <uid> inumber <number> on /.mount/var: out of inodes which by itself is a clear indication. 2. The following log message can be observed: host <process>[<pid>]: ... : No space left on device which is not deterministic and just a representation of a write error which could have several reasons. So the following check needs to be done: user@host> show system storage no-forwarding Filesystem Size Used Avail Capacity Mounted on /dev/ada1p1 475M 300M 137M 69% /.mount/var which indicates that the write error is not actually due to a lack of disk space. If either 1. or 2. has been confirmed, then the output of: user@host> file list /var/run/*.env | count need to be checked and if it indicates a high (>10000) number of files the system has been affected by this issue. This issue affects: Juniper Networks Junos OS All versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R3-S6; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S4; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-EVO; 21.1 versions prior to 21.1R3-S1-EVO; 21.2 versions prior to 21.2R1-S1-EVO, 21.2R2-EVO.
CVE-2022-22181 A reflected Cross-site Scripting (XSS) vulnerability in J-Web of Juniper Networks Junos OS allows a network-based authenticated attacker to run malicious scripts reflected off J-Web to the victim's browser in the context of their session within J-Web. This may allow the attacker to gain control of the device or attack other authenticated user sessions. This issue affects: Juniper Networks Junos OS All versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S4; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2.
CVE-2022-22162 A Generation of Error Message Containing Sensitive Information vulnerability in the CLI of Juniper Networks Junos OS allows a locally authenticated attacker with low privileges to elevate these to the level of any other user logged in via J-Web at this time, potential leading to a full compromise of the device. This issue affects Juniper Networks Junos OS: All versions prior to 15.1R7-S11; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S10; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R3-S2; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2.
CVE-2022-2193 Insecure Direct Object Reference vulnerability in HYPR Server before version 6.14.1 allows remote authenticated attackers to add a FIDO2 authenticator to arbitrary accounts via parameter tampering in the Device Manager page. This issue affects: HYPR Server versions prior to 6.14.1.
CVE-2022-21196 MMP: All versions prior to v1.0.3, PTP C-series: Device versions prior to v2.8.6.1, and PTMP C-series and A5x: Device versions prior to v2.5.4.1 does not perform proper authorization and authentication checks on multiple API routes. An attacker may gain access to these API routes and achieve remote code execution, create a denial-of-service condition, and obtain sensitive information.
CVE-2022-20963 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker would need valid credentials to access the web-based management interface of an affected device.
CVE-2022-20962 A vulnerability in the Localdisk Management feature of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to make unauthorized changes to the file system of an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted HTTP request with absolute path sequences. A successful exploit could allow the attacker to upload malicious files to arbitrary locations within the file system. Using this method, it is possible to access the underlying operating system and execute commands with system privileges.
CVE-2022-20959 A vulnerability in the External RESTful Services (ERS) API of Cisco Identity Services Engine (ISE) Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface of an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by persuading an authenticated administrator of the web-based management interface to click a malicious link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
CVE-2022-20956 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to bypass authorization and access system files. This vulnerability is due to improper access control in the web-based management interface of an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to list, download, and delete certain files that they should not have access to. Cisco plans to release software updates that address this vulnerability. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ise-access-contol-EeufSUCx ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ise-access-contol-EeufSUCx"]
CVE-2022-20951 A vulnerability in the web-based management interface of Cisco BroadWorks CommPilot application could allow an authenticated, remote attacker to perform a server-side request forgery (SSRF) attack on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface. A successful exploit could allow the attacker to obtain confidential information from the BroadWorks server and other device on the network. {{value}} ["%7b%7bvalue%7d%7d"])}]]
CVE-2022-20949 A vulnerability in the management web server of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker with high privileges to execute configuration commands on an affected system. This vulnerability exists because access to HTTPS endpoints is not properly restricted on an affected device. An attacker could exploit this vulnerability by sending specific messages to the affected HTTPS handler. A successful exploit could allow the attacker to perform configuration changes on the affected system, which should be configured and managed only through Cisco Firepower Management Center (FMC) Software.
CVE-2022-20942 A vulnerability in the web-based management interface of Cisco Email Security Appliance (ESA), Cisco Secure Email and Web Manager, and Cisco Secure Web Appliance, formerly known as Cisco Web Security Appliance (WSA), could allow an authenticated, remote attacker to retrieve sensitive information from an affected device, including user credentials. This vulnerability is due to weak enforcement of back-end authorization checks. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain confidential data that is stored on the affected device.
CVE-2022-20936 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20935 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20933 A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z3 Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit this vulnerability by crafting a malicious request and sending it to the affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to crash and restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and re-authenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention. Cisco Meraki has released software updates that address this vulnerability.
CVE-2022-20932 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20927 A vulnerability in the SSL/TLS client of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper memory management when a device initiates SSL/TLS connections. An attacker could exploit this vulnerability by ensuring that the device will connect to an SSL/TLS server that is using specific encryption parameters. A successful exploit could allow the attacker to cause the affected device to unexpectedly reload, resulting in a DoS condition.
CVE-2022-20926 A vulnerability in the web management interface of the Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The vulnerability is due to insufficient validation of user-supplied parameters for certain API endpoints. An attacker could exploit this vulnerability by sending crafted input to an affected API endpoint. A successful exploit could allow an attacker to execute arbitrary commands on the device with low system privileges. To successfully exploit this vulnerability, an attacker would need valid credentials for a user with Device permissions: by default, only Administrators, Security Approvers and Network Admins user accounts have these permissions.
CVE-2022-20925 A vulnerability in the web management interface of the Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The vulnerability is due to insufficient validation of user-supplied parameters for certain API endpoints. An attacker could exploit this vulnerability by sending crafted input to an affected API endpoint. A successful exploit could allow an attacker to execute arbitrary commands on the device with low system privileges. To successfully exploit this vulnerability, an attacker would need valid credentials for a user with Device permissions: by default, only Administrators, Security Approvers and Network Admins user accounts have these permissions.
CVE-2022-20924 A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
CVE-2022-20923 A vulnerability in the IPSec VPN Server authentication functionality of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to bypass authentication controls and access the IPSec VPN network. This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to the VPN from an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and access the IPSec VPN network. The attacker may obtain privileges that are the same level as an administrative user, depending on the crafted credentials that are used. Cisco has not released software updates that address this vulnerability.
CVE-2022-20921 A vulnerability in the API implementation of Cisco ACI Multi-Site Orchestrator (MSO) could allow an authenticated, remote attacker to elevate privileges on an affected device. This vulnerability is due to improper authorization on specific APIs. An attacker could exploit this vulnerability by sending crafted HTTP requests. A successful exploit could allow an attacker who is authenticated with non-Administrator privileges to elevate to Administrator privileges on an affected device.
CVE-2022-20920 A vulnerability in the SSH implementation of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. This vulnerability is due to improper handling of resources during an exceptional situation. An attacker could exploit this vulnerability by continuously connecting to an affected device and sending specific SSH requests. A successful exploit could allow the attacker to cause the affected device to reload.
CVE-2022-20914 A vulnerability in the External RESTful Services (ERS) API of Cisco Identity Services Engine (ISE) Software could allow an authenticated, remote attacker to obtain sensitive information. This vulnerability is due to excessive verbosity in a specific REST API output. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to obtain sensitive information, including administrative credentials for an external authentication server. Note: To successfully exploit this vulnerability, the attacker must have valid ERS administrative credentials.
CVE-2022-20913 A vulnerability in Cisco Nexus Dashboard could allow an authenticated, remote attacker to write arbitrary files on an affected device. This vulnerability is due to insufficient input validation in the web-based management interface of Cisco Nexus Dashboard. An attacker with Administrator credentials could exploit this vulnerability by uploading a crafted file. A successful exploit could allow the attacker to overwrite arbitrary files on an affected device.
CVE-2022-20912 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20911 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20910 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20909 Multiple vulnerabilities in Cisco Nexus Dashboard could allow an authenticated, local attacker to elevate privileges on an affected device. These vulnerabilities are due to insufficient input validation during CLI command execution on an affected device. An attacker could exploit these vulnerabilities by authenticating as the rescue-user and executing vulnerable CLI commands using a malicious payload. A successful exploit could allow the attacker to elevate privileges to root on an affected device.
CVE-2022-20908 Multiple vulnerabilities in Cisco Nexus Dashboard could allow an authenticated, local attacker to elevate privileges on an affected device. These vulnerabilities are due to insufficient input validation during CLI command execution on an affected device. An attacker could exploit these vulnerabilities by authenticating as the rescue-user and executing vulnerable CLI commands using a malicious payload. A successful exploit could allow the attacker to elevate privileges to root on an affected device.
CVE-2022-20907 Multiple vulnerabilities in Cisco Nexus Dashboard could allow an authenticated, local attacker to elevate privileges on an affected device. These vulnerabilities are due to insufficient input validation during CLI command execution on an affected device. An attacker could exploit these vulnerabilities by authenticating as the rescue-user and executing vulnerable CLI commands using a malicious payload. A successful exploit could allow the attacker to elevate privileges to root on an affected device.
CVE-2022-20906 Multiple vulnerabilities in Cisco Nexus Dashboard could allow an authenticated, local attacker to elevate privileges on an affected device. These vulnerabilities are due to insufficient input validation during CLI command execution on an affected device. An attacker could exploit these vulnerabilities by authenticating as the rescue-user and executing vulnerable CLI commands using a malicious payload. A successful exploit could allow the attacker to elevate privileges to root on an affected device.
CVE-2022-20905 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20904 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20903 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20902 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20901 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20900 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20899 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20898 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20897 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20896 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20895 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20894 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20893 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20892 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20891 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20890 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20889 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20888 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20887 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20886 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20885 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20884 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20883 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20882 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20881 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20880 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20879 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20878 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20877 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20876 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20875 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20874 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20873 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2022-20872 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20868 A vulnerability in the web-based management interface of Cisco Email Security Appliance, Cisco Secure Email and Web Manager and Cisco Secure Web Appliance could allow an authenticated, remote attacker to elevate privileges on an affected system. The attacker needs valid credentials to exploit this vulnerability. This vulnerability is due to the use of a hardcoded value to encrypt a token used for certain APIs calls . An attacker could exploit this vulnerability by authenticating to the device and sending a crafted HTTP request. A successful exploit could allow the attacker to impersonate another valid user and execute commands with the privileges of that user account.
CVE-2022-20865 A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The attacker would need to have Administrator privileges on the device. This vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.
CVE-2022-20862 A vulnerability in the web-based management interface of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to read arbitrary files on the underlying operating system of an affected device. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request that contains directory traversal character sequences to an affected system. A successful exploit could allow the attacker to access sensitive files on the operating system.
CVE-2022-20859 A vulnerability in the Disaster Recovery framework of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM &amp; Presence Service (Unified CM IM&amp;P), and Cisco Unity Connection could allow an authenticated, remote attacker to perform certain administrative actions they should not be able to. This vulnerability is due to insufficient access control checks on the affected device. An attacker with read-only privileges could exploit this vulnerability by executing a specific vulnerable command on an affected device. A successful exploit could allow the attacker to perform a set of administrative actions they should not be able to.
CVE-2022-20855 A vulnerability in the self-healing functionality of Cisco IOS XE Software for Embedded Wireless Controllers on Catalyst Access Points could allow an authenticated, local attacker to escape the restricted controller shell and execute arbitrary commands on the underlying operating system of the access point. This vulnerability is due to improper checks throughout the restart of certain system processes. An attacker could exploit this vulnerability by logging on to an affected device and executing certain CLI commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS as root. To successfully exploit this vulnerability, an attacker would need valid credentials for a privilege level 15 user of the wireless controller.
CVE-2022-20851 A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI API. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. To exploit this vulnerability, an attacker must have valid Administrator privileges on the affected device.
CVE-2022-20850 A vulnerability in the CLI of stand-alone Cisco IOS XE SD-WAN Software and Cisco SD-WAN Software could allow an authenticated, local attacker to delete arbitrary files from the file system of an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting arbitrary file path information when using commands in the CLI of an affected device. A successful exploit could allow the attacker to delete arbitrary files from the file system of the affected device.
CVE-2022-20844 A vulnerability in authentication mechanism of Cisco Software-Defined Application Visibility and Control (SD-AVC) on Cisco vManage could allow an unauthenticated, remote attacker to access the GUI of Cisco SD-AVC using a default static username and password combination. This vulnerability exists because the GUI is accessible on self-managed cloud installations or local server installations of Cisco vManage. An attacker could exploit this vulnerability by accessing the exposed GUI of Cisco SD-AVC. A successful exploit could allow the attacker to view managed device names, SD-AVC logs, and SD-AVC DNS server IP addresses.
CVE-2022-20843 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20840 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20839 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20838 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20836 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20835 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20834 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20833 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20832 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20831 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by inserting crafted input into various data fields in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface, or access sensitive, browser-based information. In some cases, it is also possible to cause a temporary availability impact to portions of the FMC Dashboard.
CVE-2022-20830 A vulnerability in authentication mechanism of Cisco Software-Defined Application Visibility and Control (SD-AVC) on Cisco vManage could allow an unauthenticated, remote attacker to access the GUI of Cisco SD-AVC without authentication. This vulnerability exists because the GUI is accessible on self-managed cloud installations or local server installations of Cisco vManage. An attacker could exploit this vulnerability by accessing the exposed GUI of Cisco SD-AVC. A successful exploit could allow the attacker to view managed device names, SD-AVC logs, and SD-AVC DNS server IP addresses.
CVE-2022-20829 A vulnerability in the packaging of Cisco Adaptive Security Device Manager (ASDM) images and the validation of those images by Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker with administrative privileges to upload an ASDM image that contains malicious code to a device that is running Cisco ASA Software. This vulnerability is due to insufficient validation of the authenticity of an ASDM image during its installation on a device that is running Cisco ASA Software. An attacker could exploit this vulnerability by installing a crafted ASDM image on the device that is running Cisco ASA Software and then waiting for a targeted user to access that device using ASDM. A successful exploit could allow the attacker to execute arbitrary code on the machine of the targeted user with the privileges of that user on that machine. Notes: To successfully exploit this vulnerability, the attacker must have administrative privileges on the device that is running Cisco ASA Software. Potential targets are limited to users who manage the same device that is running Cisco ASA Software using ASDM. Cisco has released and will release software updates that address this vulnerability.
CVE-2022-20822 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to read and delete files on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request that contains certain character sequences to an affected system. A successful exploit could allow the attacker to read or delete specific files on the device that their configured administrative level should not have access to. Cisco plans to release software updates that address this vulnerability.
CVE-2022-20819 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information from an affected device. This vulnerability exists because administrative privilege levels for sensitive data are not properly enforced. An attacker with read-only privileges for the web-based management interface on an affected device could exploit this vulnerability by browsing to a page that contains sensitive data. A successful exploit could allow the attacker to collect sensitive information about the system configuration.
CVE-2022-20810 A vulnerability in the Simple Network Management Protocol (SNMP) of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an authenticated, remote attacker to access sensitive information. This vulnerability is due to insufficient restrictions that allow a sensitive configuration detail to be disclosed. An attacker could exploit this vulnerability by retrieving data through SNMP read-only community access. A successful exploit could allow the attacker to view Service Set Identifier (SSID) preshared keys (PSKs) that are configured on the affected device.
CVE-2022-20809 Multiple vulnerabilities in the API and web-based management interfaces of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to write files or disclose sensitive information on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2022-20808 A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incorrect handling of multiple simultaneous device registrations on Cisco SSM On-Prem. An attacker could exploit this vulnerability by sending multiple device registration requests to Cisco SSM On-Prem. A successful exploit could allow the attacker to cause a DoS condition on an affected device.
CVE-2022-20807 Multiple vulnerabilities in the API and web-based management interfaces of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to write files or disclose sensitive information on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2022-20806 Multiple vulnerabilities in the API and web-based management interfaces of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to write files or disclose sensitive information on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2022-20801 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device.
CVE-2022-20799 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device.
CVE-2022-20798 A vulnerability in the external authentication functionality of Cisco Secure Email and Web Manager, formerly known as Cisco Security Management Appliance (SMA), and Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass authentication and log in to the web management interface of an affected device. This vulnerability is due to improper authentication checks when an affected device uses Lightweight Directory Access Protocol (LDAP) for external authentication. An attacker could exploit this vulnerability by entering a specific input on the login page of the affected device. A successful exploit could allow the attacker to gain unauthorized access to the web-based management interface of the affected device.
CVE-2022-20797 A vulnerability in the web-based management interface of Cisco Secure Network Analytics, formerly Cisco Stealthwatch Enterprise, could allow an authenticated, remote attacker to execute arbitrary commands as an administrator on the underlying operating system. This vulnerability is due to insufficient user input validation by the web-based management interface of the affected software. An attacker could exploit this vulnerability by injecting arbitrary commands in the web-based management interface. A successful exploit could allow the attacker to make configuration changes on the affected device or cause certain services to restart unexpectedly.
CVE-2022-20796 On May 4, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in Clam AntiVirus (ClamAV) versions 0.103.4, 0.103.5, 0.104.1, and 0.104.2 could allow an authenticated, local attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog.
CVE-2022-20791 A vulnerability in the database user privileges of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unified Communications Manager IM &amp; Presence Service (Unified CM IM&amp;P) could allow an authenticated, remote attacker to read arbitrary files on the underlying operating system of an affected device. This vulnerability is due to insufficient file permission restrictions. An attacker could exploit this vulnerability by sending a crafted command from the API to the application. A successful exploit could allow the attacker to read arbitrary files on the underlying operating system of the affected device. The attacker would need valid user credentials to exploit this vulnerability.
CVE-2022-20787 A vulnerability in the web-based management interface of Cisco Unified Communications Manager (Unified CM) Software and Cisco Unified CM Session Management Edition (SME) Software could allow an authenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected device. This vulnerability is due to insufficient CSRF protections for the web-based management interface on an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the affected user.
CVE-2022-20782 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information from an affected device. This vulnerability is due to improper enforcement of administrative privilege levels for high-value sensitive data. An attacker with read-only Administrator privileges to the web-based management interface on an affected device could exploit this vulnerability by browsing to a page that contains sensitive data. A successful exploit could allow the attacker to collect sensitive information regarding the configuration of the system.
CVE-2022-20781 A vulnerability in the web-based management interface of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by inserting malicious data into a specific data field in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface.
CVE-2022-20774 A vulnerability in the web-based management interface of Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack against a user of the web-based interface of an affected system. This vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform configuration changes on the affected device, resulting in a denial of service (DoS) condition.
CVE-2022-20769 A vulnerability in the authentication functionality of Cisco Wireless LAN Controller (WLC) AireOS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error validation. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to cause the wireless LAN controller to crash, resulting in a DoS condition. Note: This vulnerability affects only devices that have Federal Information Processing Standards (FIPS) mode enabled.
CVE-2022-20762 A vulnerability in the Common Execution Environment (CEE) ConfD CLI of Cisco Ultra Cloud Core - Subscriber Microservices Infrastructure (SMI) software could allow an authenticated, local attacker to escalate privileges on an affected device. This vulnerability is due to insufficient access control in the affected CLI. An attacker could exploit this vulnerability by authenticating as a CEE ConfD CLI user and executing a specific CLI command. A successful exploit could allow an attacker to access privileged containers with root privileges.
CVE-2022-20759 A vulnerability in the web services interface for remote access VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, but unprivileged, remote attacker to elevate privileges to level 15. This vulnerability is due to improper separation of authentication and authorization scopes. An attacker could exploit this vulnerability by sending crafted HTTPS messages to the web services interface of an affected device. A successful exploit could allow the attacker to gain privilege level 15 access to the web management interface of the device. This includes privilege level 15 access to the device using management tools like the Cisco Adaptive Security Device Manager (ASDM) or the Cisco Security Manager (CSM). Note: With Cisco FTD Software, the impact is lower than the CVSS score suggests because the affected web management interface allows for read access only.
CVE-2022-20755 Multiple vulnerabilities in the API and web-based management interfaces of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker with read/write privileges to the application to write files or execute arbitrary code on the underlying operating system of an affected device as the root user. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2022-20754 Multiple vulnerabilities in the API and web-based management interfaces of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker with read/write privileges to the application to write files or execute arbitrary code on the underlying operating system of an affected device as the root user. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2022-20753 A vulnerability in web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to an affected device. A successful exploit could allow the attacker to execute remote code on the affected device. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.
CVE-2022-20744 A vulnerability in the input protection mechanisms of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to view data without proper authorization. This vulnerability exists because of a protection mechanism that relies on the existence or values of a specific input. An attacker could exploit this vulnerability by modifying this input to bypass the protection mechanism and sending a crafted request to an affected device. A successful exploit could allow the attacker to view data beyond the scope of their authorization.
CVE-2022-20743 A vulnerability in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to bypass security protections and upload malicious files to the affected system. This vulnerability is due to improper validation of files uploaded to the web management interface of Cisco FMC Software. An attacker could exploit this vulnerability by uploading a maliciously crafted file to a device running affected software. A successful exploit could allow the attacker to store malicious files on the device, which they could access later to conduct additional attacks, including executing arbitrary code on the affected device with root privileges.
CVE-2022-20739 A vulnerability in the CLI of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as the root user. The attacker must be authenticated on the affected system as a low-privileged user to exploit this vulnerability. This vulnerability exists because a file leveraged by a root user is executed when a low-privileged user runs specific commands on an affected system. An attacker could exploit this vulnerability by injecting arbitrary commands to a specific file as a lower-privileged user and then waiting until an admin user executes specific commands. The commands would then be executed on the device by the root user. A successful exploit could allow the attacker to escalate their privileges on the affected system from a low-privileged user to the root user.
CVE-2022-20737 A vulnerability in the handler for HTTP authentication for resources accessed through the Clientless SSL VPN portal of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device or to obtain portions of process memory from an affected device. This vulnerability is due to insufficient bounds checking when parsing specific HTTP authentication messages. An attacker could exploit this vulnerability by sending malicious traffic to an affected device acting as a VPN Gateway. To send this malicious traffic, an attacker would need to control a web server that can be accessed through the Clientless SSL VPN portal. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition, or to retrieve bytes from the device process memory that may contain sensitive information.
CVE-2022-20732 A vulnerability in the configuration file protections of Cisco Virtualized Infrastructure Manager (VIM) could allow an authenticated, local attacker to access confidential information and elevate privileges on an affected device. This vulnerability is due to improper access permissions for certain configuration files. An attacker with low-privileged credentials could exploit this vulnerability by accessing an affected device and reading the affected configuration files. A successful exploit could allow the attacker to obtain internal database credentials, which the attacker could use to view and modify the contents of the database. The attacker could use this access to the database to elevate privileges on the affected device.
CVE-2022-20717 A vulnerability in the NETCONF process of Cisco SD-WAN vEdge Routers could allow an authenticated, local attacker to cause an affected device to run out of memory, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient memory management when an affected device receives large amounts of traffic. An attacker could exploit this vulnerability by sending malicious traffic to an affected device. A successful exploit could allow the attacker to cause the device to crash, resulting in a DoS condition.
CVE-2022-20716 A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain escalated privileges. This vulnerability is due to improper access control on files within the affected system. A local attacker could exploit this vulnerability by modifying certain files on the vulnerable device. If successful, the attacker could gain escalated privileges and take actions on the system with the privileges of the root user.
CVE-2022-20697 A vulnerability in the web services interface of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper resource management in the HTTP server code. An attacker could exploit this vulnerability by sending a large number of HTTP requests to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
CVE-2022-20695 A vulnerability in the authentication functionality of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to bypass authentication controls and log in to the device through the management interface This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and log in to the device as an administrator. The attacker could obtain privileges that are the same level as an administrative user but it depends on the crafted credentials. Note: This vulnerability exists because of a non-default device configuration that must be present for it to be exploitable. For details about the vulnerable configuration, see the Vulnerable Products section of this advisory.
CVE-2022-20693 A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI API. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.
CVE-2022-20692 A vulnerability in the NETCONF over SSH feature of Cisco IOS XE Software could allow a low-privileged, authenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to insufficient resource management. An attacker could exploit this vulnerability by initiating a large number of NETCONF over SSH connections. A successful exploit could allow the attacker to exhaust resources, causing the device to reload and resulting in a DoS condition on an affected device.
CVE-2022-20684 A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition on the device. This vulnerability is due to a lack of input validation of the information used to generate an SNMP trap related to a wireless client connection event. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
CVE-2022-20681 A vulnerability in the CLI of Cisco IOS XE Software for Cisco Catalyst 9000 Family Switches and Cisco Catalyst 9000 Family Wireless Controllers could allow an authenticated, local attacker to elevate privileges to level 15 on an affected device. This vulnerability is due to insufficient validation of user privileges after the user executes certain CLI commands. An attacker could exploit this vulnerability by logging in to an affected device as a low-privileged user and then executing certain CLI commands. A successful exploit could allow the attacker to execute arbitrary commands with level 15 privileges on the affected device.
CVE-2022-20680 A vulnerability in the web-based management interface of Cisco Prime Service Catalog could allow an authenticated, remote attacker to access sensitive information on an affected device. This vulnerability is due to improper enforcement of Administrator privilege levels for low-value sensitive data. An attacker with read-only Administrator access to the web-based management interface could exploit this vulnerability by sending a malicious HTTP request to the page that contains the sensitive data. A successful exploit could allow the attacker to collect sensitive information about users of the system and orders that have been placed using the application.
CVE-2022-20676 A vulnerability in the Tool Command Language (Tcl) interpreter of Cisco IOS XE Software could allow an authenticated, local attacker to escalate from privilege level 15 to root-level privileges. This vulnerability is due to insufficient input validation of data that is passed into the Tcl interpreter. An attacker could exploit this vulnerability by loading malicious Tcl code on an affected device. A successful exploit could allow the attacker to execute arbitrary commands as root. By default, Tcl shell access requires privilege level 15.
CVE-2022-20665 A vulnerability in the CLI of Cisco StarOS could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user. To exploit this vulnerability, an attacker would need to have valid administrative credentials on an affected device.
CVE-2022-20664 A vulnerability in the web management interface of Cisco Secure Email and Web Manager, formerly Cisco Security Management Appliance (SMA), and Cisco Email Security Appliance (ESA) could allow an authenticated, remote attacker to retrieve sensitive information from a Lightweight Directory Access Protocol (LDAP) external authentication server connected to an affected device. This vulnerability is due to a lack of proper input sanitization while querying the external authentication server. An attacker could exploit this vulnerability by sending a crafted query through an external authentication web page. A successful exploit could allow the attacker to gain access to sensitive information, including user credentials from the external authentication server. To exploit this vulnerability, an attacker would need valid operator-level (or higher) credentials.
CVE-2022-20653 A vulnerability in the DNS-based Authentication of Named Entities (DANE) email verification component of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling in DNS name resolution by the affected software. An attacker could exploit this vulnerability by sending specially formatted email messages that are processed by an affected device. A successful exploit could allow the attacker to cause the device to become unreachable from management interfaces or to process additional email messages for a period of time until the device recovers, resulting in a DoS condition. Continued attacks could cause the device to become completely unavailable, resulting in a persistent DoS condition.
CVE-2022-20651 A vulnerability in the logging component of Cisco Adaptive Security Device Manager (ASDM) could allow an authenticated, local attacker to view sensitive information in clear text on an affected system. Cisco ADSM must be deployed in a shared workstation environment for this issue to be exploited. This vulnerability is due to the storage of unencrypted credentials in certain logs. An attacker could exploit this vulnerability by accessing the logs on an affected system. A successful exploit could allow the attacker to view the credentials of other users of the shared device.
CVE-2022-20650 A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation of user supplied data that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP POST request to the NX-API of an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system. Note: The NX-API feature is disabled by default.
CVE-2022-2030 A directory traversal vulnerability caused by specific character sequences within an improperly sanitized URL was identified in some CGI programs of Zyxel USG FLEX 100(W) firmware versions 4.50 through 5.30, USG FLEX 200 firmware versions 4.50 through 5.30, USG FLEX 500 firmware versions 4.50 through 5.30, USG FLEX 700 firmware versions 4.50 through 5.30, USG FLEX 50(W) firmware versions 4.16 through 5.30, USG20(W)-VPN firmware versions 4.16 through 5.30, ATP series firmware versions 4.32 through 5.30, VPN series firmware versions 4.30 through 5.30, USG/ZyWALL series firmware versions 4.11 through 4.72, that could allow an authenticated attacker to access some restricted files on a vulnerable device.
CVE-2022-20060 In preloader (usb), there is a possible permission bypass due to a missing proper image authentication. This could lead to local escalation of privilege, for an attacker who has physical access to the device, with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: ALPS06160806; Issue ID: ALPS06137462.
CVE-2022-1959 AppLock version 7.9.29 allows an attacker with physical access to the device to bypass biometric authentication. This is possible because the application did not correctly implement fingerprint validations.
CVE-2022-1745 The authentication mechanism used by technicians on the tested version of Dominion Voting Systems ImageCast X is susceptible to forgery. An attacker with physical access may use this to gain administrative privileges on a device and install malicious code or perform arbitrary administrative actions.
CVE-2022-1669 A buffer overflow vulnerability has been detected in the firewall function of the device management web portal. The device runs a CGI binary (index.cgi) to offer a management web application. Once authenticated with valid credentials in this web portal, a potential attacker could submit any "Address" value and it would be copied to a second variable with a "strcpy" vulnerable function without checking its length. Because of this, it is possible to send a long address value to overflow the process stack, controlling the function return address.
CVE-2022-1410 OS Command Injection vulnerability in the db_optimize component of Device42 Asset Management Appliance allows an authenticated attacker to execute remote code on the device. This issue affects: Device42 CMDB version 18.01.00 and prior versions.
CVE-2022-0732 The backend infrastructure shared by multiple mobile device monitoring services does not adequately authenticate or authorize API requests, creating an IDOR (Insecure Direct Object Reference) vulnerability.
CVE-2022-0342 An authentication bypass vulnerability in the CGI program of Zyxel USG/ZyWALL series firmware versions 4.20 through 4.70, USG FLEX series firmware versions 4.50 through 5.20, ATP series firmware versions 4.32 through 5.20, VPN series firmware versions 4.30 through 5.20, and NSG series firmware versions V1.20 through V1.33 Patch 4, which could allow an attacker to bypass the web authentication and obtain administrative access of the device.
CVE-2022-0162 The vulnerability exists in TP-Link TL-WR841N V11 3.16.9 Build 160325 Rel.62500n wireless router due to transmission of authentication information in cleartextbase64 format. Successful exploitation of this vulnerability could allow a remote attacker to intercept credentials and subsequently perform administrative operations on the affected device through web-based management interface.
CVE-2022-0018 An information exposure vulnerability exists in the Palo Alto Networks GlobalProtect app on Windows and MacOS where the credentials of the local user account are sent to the GlobalProtect portal when the Single Sign-On feature is enabled in the GlobalProtect portal configuration. This product behavior is intentional and poses no security risk when connecting to trusted GlobalProtect portals configured to use the same Single Sign-On credentials both for the local user account as well as the GlobalProtect login. However when the credentials are different, the local account credentials are inadvertently sent to the GlobalProtect portal for authentication. A third party MITM type of attacker cannot see these credentials in transit. This vulnerability is a concern where the GlobalProtect app is deployed on Bring-your-Own-Device (BYOD) type of clients with private local user accounts or GlobalProtect app is used to connect to different organizations. Fixed versions of GlobalProtect app have an app setting to prevent the transmission of the user's local user credentials to the target GlobalProtect portal regardless of the portal configuration. This issue impacts: GlobalProtect app 5.1 versions earlier than GlobalProtect app 5.1.10 on Windows and MacOS; GlobalProtect app 5.2 versions earlier than GlobalProtect app 5.2.9 on Windows and MacOS This issue does not affect GlobalProtect app on other platforms.
CVE-2021-46740 The device authentication service module has a defect vulnerability introduced in the design process.Successful exploitation of this vulnerability may affect data confidentiality.
CVE-2021-44262 A vulnerability is in the 'MNU_top.htm' page of the Netgear W104, version WAC104-V1.0.4.13, which can allow a remote attacker to access this page without any authentication. When processed, it exposes some key information for the device.
CVE-2021-44261 A vulnerability is in the 'BRS_top.html' page of the Netgear W104, version WAC104-V1.0.4.13, which can allow a remote attacker to access this page without any authentication. When processed, it exposes firmware version information for the device.
CVE-2021-44259 A vulnerability is in the 'wx.html' page of the WAVLINK AC1200, version WAVLINK-A42W-1.27.6-20180418, which can allow a remote attacker to access this page without any authentication. When an unauthorized user accesses this page directly, it connects to this device as a friend of the device owner.
CVE-2021-44168 A download of code without integrity check vulnerability in the "execute restore src-vis" command of FortiOS before 7.0.3 may allow a local authenticated attacker to download arbitrary files on the device via specially crafted update packages.
CVE-2021-44057 An improper authentication vulnerability has been reported to affect QNAP device running Photo Station. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Photo Station: Photo Station 6.0.20 ( 2022/02/15 ) and later Photo Station 5.7.16 ( 2022/02/11 ) and later Photo Station 5.4.13 ( 2022/02/11 ) and later
CVE-2021-44056 An improper authentication vulnerability has been reported to affect QNAP device running Video Station. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Video Station: Video Station 5.5.9 and later Video Station 5.3.13 and later Video Station 5.1.8 and later
CVE-2021-42852 A command injection vulnerability was reported in some Lenovo Personal Cloud Storage devices that could allow an authenticated user to execute operating system commands by sending a crafted packet to the device.
CVE-2021-42753 An improper limitation of a pathname to a restricted directory ('Path Traversal') vulnerability [CWE-22] in FortiWeb management interface 6.4.1 and below, 6.3.15 and below, 6.2.x, 6.1.x, 6.0.x, 5.9.x and 5.8.x may allow an authenticated attacker to perform an arbitrary file and directory deletion in the device filesystem.
CVE-2021-42324 An issue was discovered on DCN (Digital China Networks) S4600-10P-SI devices before R0241.0470. Due to improper parameter validation in the console interface, it is possible for a low-privileged authenticated attacker to escape the sandbox environment and execute system commands as root via shell metacharacters in the capture command parameters. Command output will be shown on the Serial interface of the device. Exploitation requires both credentials and physical access.
CVE-2021-41504 ** UNSUPPORTED WHEN ASSIGNED ** An Elevated Privileges issue exists in D-Link DCS-5000L v1.05 and DCS-932L v2.17 and older. The use of the digest-authentication for the devices command interface may allow further attack vectors that may compromise the cameras configuration and allow malicious users on the LAN to access the device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
CVE-2021-41503 ** UNSUPPORTED WHEN ASSIGNED ** DCS-5000L v1.05 and DCS-932L v2.17 and older are affecged by Incorrect Acess Control. The use of the basic authentication for the devices command interface allows attack vectors that may compromise the cameras configuration and allow malicious users on the LAN to access the device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
CVE-2021-41027 A stack-based buffer overflow in Fortinet FortiWeb version 6.4.1 and 6.4.0, allows an authenticated attacker to execute unauthorized code or commands via crafted certificates loaded into the device.
CVE-2021-40906 CheckMK Raw Edition software (versions 1.5.0 to 1.6.0) does not sanitise the input of a web service parameter that is in an unauthenticated zone. This Reflected XSS allows an attacker to open a backdoor on the device with HTML content and interpreted by the browser (such as JavaScript or other client-side scripts) or to steal the session cookies of a user who has previously authenticated via a man in the middle. Successful exploitation requires access to the web service resource without authentication.
CVE-2021-40867 Certain NETGEAR smart switches are affected by an authentication hijacking race-condition vulnerability by an unauthenticated attacker who uses the same source IP address as an admin in the process of logging in (e.g., behind the same NAT device, or already in possession of a foothold on an admin's machine). This occurs because the multi-step HTTP authentication process is effectively tied only to the source IP address. This affects GC108P before 1.0.8.2, GC108PP before 1.0.8.2, GS108Tv3 before 7.0.7.2, GS110TPP before 7.0.7.2, GS110TPv3 before 7.0.7.2, GS110TUP before 1.0.5.3, GS308T before 1.0.3.2, GS310TP before 1.0.3.2, GS710TUP before 1.0.5.3, GS716TP before 1.0.4.2, GS716TPP before 1.0.4.2, GS724TPP before 2.0.6.3, GS724TPv2 before 2.0.6.3, GS728TPPv2 before 6.0.8.2, GS728TPv2 before 6.0.8.2, GS750E before 1.0.1.10, GS752TPP before 6.0.8.2, GS752TPv2 before 6.0.8.2, MS510TXM before 1.0.4.2, and MS510TXUP before 1.0.4.2.
CVE-2021-40831 The AWS IoT Device SDK v2 for Java, Python, C++ and Node.js appends a user supplied Certificate Authority (CA) to the root CAs instead of overriding it on macOS systems. Additionally, SNI validation is also not enabled when the CA has been &#8220;overridden&#8221;. TLS handshakes will thus succeed if the peer can be verified either from the user-supplied CA or the system&#8217;s default trust-store. Attackers with access to a host&#8217;s trust stores or are able to compromise a certificate authority already in the host's trust store (note: the attacker must also be able to spoof DNS in this case) may be able to use this issue to bypass CA pinning. An attacker could then spoof the MQTT broker, and either drop traffic and/or respond with the attacker's data, but they would not be able to forward this data on to the MQTT broker because the attacker would still need the user's private keys to authenticate against the MQTT broker. The 'aws_tls_ctx_options_override_default_trust_store_*' function within the aws-c-io submodule has been updated to address this behavior. This issue affects: Amazon Web Services AWS IoT Device SDK v2 for Java versions prior to 1.5.0 on macOS. Amazon Web Services AWS IoT Device SDK v2 for Python versions prior to 1.7.0 on macOS. Amazon Web Services AWS IoT Device SDK v2 for C++ versions prior to 1.14.0 on macOS. Amazon Web Services AWS IoT Device SDK v2 for Node.js versions prior to 1.6.0 on macOS. Amazon Web Services AWS-C-IO 0.10.7 on macOS.
CVE-2021-40830 The AWS IoT Device SDK v2 for Java, Python, C++ and Node.js appends a user supplied Certificate Authority (CA) to the root CAs instead of overriding it on Unix systems. TLS handshakes will thus succeed if the peer can be verified either from the user-supplied CA or the system&#8217;s default trust-store. Attackers with access to a host&#8217;s trust stores or are able to compromise a certificate authority already in the host's trust store (note: the attacker must also be able to spoof DNS in this case) may be able to use this issue to bypass CA pinning. An attacker could then spoof the MQTT broker, and either drop traffic and/or respond with the attacker's data, but they would not be able to forward this data on to the MQTT broker because the attacker would still need the user's private keys to authenticate against the MQTT broker. The 'aws_tls_ctx_options_override_default_trust_store_*' function within the aws-c-io submodule has been updated to override the default trust store. This corrects this issue. This issue affects: Amazon Web Services AWS IoT Device SDK v2 for Java versions prior to 1.5.0 on Linux/Unix. Amazon Web Services AWS IoT Device SDK v2 for Python versions prior to 1.6.1 on Linux/Unix. Amazon Web Services AWS IoT Device SDK v2 for C++ versions prior to 1.12.7 on Linux/Unix. Amazon Web Services AWS IoT Device SDK v2 for Node.js versions prior to 1.5.3 on Linux/Unix. Amazon Web Services AWS-C-IO 0.10.4 on Linux/Unix.
CVE-2021-40825 nLight ECLYPSE (nECY) system Controllers running software prior to 1.17.21245.754 contain a default key vulnerability. The nECY does not force a change to the key upon the initial configuration of an affected device. nECY system controllers utilize an encrypted channel to secure SensorViewTM configuration and monitoring software and nECY to nECY communications. Impacted devices are at risk of exploitation. A remote attacker with IP access to an impacted device could submit lighting control commands to the nECY by leveraging the default key. A successful attack may result in the attacker gaining the ability to modify lighting conditions or gain the ability to update the software on lighting devices. The impacted key is referred to as the SensorView Password in the nECY nLight Explorer Interface and the Gateway Password in the SensorView application. An attacker cannot authenticate to or modify the configuration or software of the nECY system controller.
CVE-2021-40526 Incorrect calculation of buffer size vulnerability in Peleton TTR01 up to and including PTV55G allows a remote attacker to trigger a Denial of Service attack through the GymKit daemon process by exploiting a heap overflow in the network server handling the Apple GymKit communication. This can lead to an Apple MFI device not being able to authenticate with the Peleton Bike
CVE-2021-40422 An authentication bypass vulnerability exists in the device password generation functionality of Swift Sensors Gateway SG3-1010. A specially-crafted network request can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.
CVE-2021-40350 webctrl.cgi.elf on Christie Digital DWU850-GS V06.46 devices allows attackers to perform any desired action via a crafted query containing an unspecified Cookie header. Authentication bypass can be achieved by including an administrative cookie that the device does not validate.
CVE-2021-40125 A vulnerability in the Internet Key Exchange Version 2 (IKEv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. This vulnerability is due to improper control of a resource. An attacker with the ability to spoof a trusted IKEv2 site-to-site VPN peer and in possession of valid IKEv2 credentials for that peer could exploit this vulnerability by sending malformed, authenticated IKEv2 messages to an affected device. A successful exploit could allow the attacker to trigger a reload of the device.
CVE-2021-40124 A vulnerability in the Network Access Manager (NAM) module of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to escalate privileges on an affected device. This vulnerability is due to incorrect privilege assignment to scripts executed before user logon. An attacker could exploit this vulnerability by configuring a script to be executed before logon. A successful exploit could allow the attacker to execute arbitrary code with SYSTEM privileges.
CVE-2021-40123 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker with administrative read-only privileges to download files that should be restricted. This vulnerability is due to incorrect permissions settings on an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request to the device. A successful exploit could allow the attacker to download files that should be restricted.
CVE-2021-40120 A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges.
CVE-2021-3956 A read-only authentication bypass vulnerability was reported in the Third Quarter 2021 release of Lenovo XClarity Controller (XCC) firmware affecting XCC devices configured in LDAP Authentication Only Mode and using an LDAP server that supports &#8220;unauthenticated bind&#8221;, such as Microsoft Active Directory. An unauthenticated user can gain read-only access to XCC in such a configuration, thereby allowing the XCC device configuration to be viewed but not changed. XCC devices configured to use local authentication, LDAP Authentication + Authorization Mode, or LDAP servers that support only &#8220;authenticated bind&#8221; and/or &#8220;anonymous bind&#8221; are not affected.
CVE-2021-39306 A stack buffer overflow was discovered on Realtek RTL8195AM device before 2.0.10, it exists in the client code when an attacker sends a big size Authentication challenge text in WEP security.
CVE-2021-38703 Wireless devices running certain Arcadyan-derived firmware (such as KPN Experia WiFi 1.00.15) do not properly sanitise user input to the syslog configuration form. An authenticated remote attacker could leverage this to alter the device configuration and achieve remote code execution. This can be exploited in conjunction with CVE-2021-20090.
CVE-2021-38686 An improper authentication vulnerability has been reported to affect QNAP device, VioStor. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of QVR: QVR FW 5.1.6 build 20211109 and later
CVE-2021-38412 Properly formatted POST requests to multiple resources on the HTTP and HTTPS web servers of the Digi PortServer TS 16 Rack device do not require authentication or authentication tokens. This vulnerability could allow an attacker to enable the SNMP service and manipulate the community strings to achieve further control in.
CVE-2021-37748 Multiple buffer overflows in the limited configuration shell (/sbin/gs_config) on Grandstream HT801 devices before 1.0.29 allow remote authenticated users to execute arbitrary code as root via a crafted manage_if setting, thus bypassing the intended restrictions of this shell and taking full control of the device. There are default weak credentials that can be used to authenticate.
CVE-2021-37187 An issue was discovered on Digi TransPort devices through 2021-07-21. An authenticated attacker may read a password file (with reversible passwords) from the device, which allows decoding of other users' passwords.
CVE-2021-37173 A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.14.1), RUGGEDCOM ROX RX1400 (All versions < V2.14.1), RUGGEDCOM ROX RX1500 (All versions < V2.14.1), RUGGEDCOM ROX RX1501 (All versions < V2.14.1), RUGGEDCOM ROX RX1510 (All versions < V2.14.1), RUGGEDCOM ROX RX1511 (All versions < V2.14.1), RUGGEDCOM ROX RX1512 (All versions < V2.14.1), RUGGEDCOM ROX RX1524 (All versions < V2.14.1), RUGGEDCOM ROX RX1536 (All versions < V2.14.1), RUGGEDCOM ROX RX5000 (All versions < V2.14.1). The command line interface of affected devices insufficiently restrict file read and write operations for low privileged users. This could allow an authenticated remote attacker to escalate privileges and gain root access to the device.
CVE-2021-37172 A vulnerability has been identified in SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (V4.5.0). Affected devices fail to authenticate against configured passwords when provisioned using TIA Portal V13. This could allow an attacker using TIA Portal V13 or later versions to bypass authentication and download arbitrary programs to the PLC. The vulnerability does not occur when TIA Portal V13 SP1 or any later version was used to provision the device.
CVE-2021-36460 VeryFitPro (com.veryfit2hr.second) 3.2.8 hashes the account's password locally on the device and uses the hash to authenticate in all communication with the backend API, including login, registration and changing of passwords. This allows an attacker in possession of a hash to takeover a user's account, rendering the benefits of storing hashed passwords in the database useless.
CVE-2021-36341 Dell Wyse Device Agent version 14.5.4.1 and below contain a sensitive data exposure vulnerability. A local authenticated user with low privileges could potentially exploit this vulnerability in order to access sensitive information.
CVE-2021-36175 An improper neutralization of input vulnerability [CWE-79] in FortiWebManager versions 6.2.3 and below, 6.0.2 and below may allow a remote authenticated attacker to inject malicious script/tags via the name/description/comments parameter of various sections of the device.
CVE-2021-35973 NETGEAR WAC104 devices before 1.0.4.15 are affected by an authentication bypass vulnerability in /usr/sbin/mini_httpd, allowing an unauthenticated attacker to invoke any action by adding the &currentsetting.htm substring to the HTTP query, a related issue to CVE-2020-27866. This directly allows the attacker to change the web UI password, and eventually to enable debug mode (telnetd) and gain a shell on the device as the admin limited-user account (however, escalation to root is simple because of weak permissions on the /etc/ directory).
CVE-2021-35492 Wowza Streaming Engine through 4.8.11+5 could allow an authenticated, remote attacker to exhaust filesystem resources via the /enginemanager/server/vhost/historical.jsdata vhost parameter. This is due to the insufficient management of available filesystem resources. An attacker could exploit this vulnerability through the Virtual Host Monitoring section by requesting random virtual-host historical data and exhausting available filesystem resources. A successful exploit could allow the attacker to cause database errors and cause the device to become unresponsive to web-based management. (Manual intervention is required to free filesystem resources and return the application to an operational state.)
CVE-2021-35395 Realtek Jungle SDK version v2.x up to v3.4.14B provides an HTTP web server exposing a management interface that can be used to configure the access point. Two versions of this management interface exists: one based on Go-Ahead named webs and another based on Boa named boa. Both of them are affected by these vulnerabilities. Specifically, these binaries are vulnerable to the following issues: - stack buffer overflow in formRebootCheck due to unsafe copy of submit-url parameter - stack buffer overflow in formWsc due to unsafe copy of submit-url parameter - stack buffer overflow in formWlanMultipleAP due to unsafe copy of submit-url parameter - stack buffer overflow in formWlSiteSurvey due to unsafe copy of ifname parameter - stack buffer overflow in formStaticDHCP due to unsafe copy of hostname parameter - stack buffer overflow in formWsc due to unsafe copy of 'peerPin' parameter - arbitrary command execution in formSysCmd via the sysCmd parameter - arbitrary command injection in formWsc via the 'peerPin' parameter Exploitability of identified issues will differ based on what the end vendor/manufacturer did with the Realtek SDK webserver. Some vendors use it as-is, others add their own authentication implementation, some kept all the features from the server, some remove some of them, some inserted their own set of features. However, given that Realtek SDK implementation is full of insecure calls and that developers tends to re-use those examples in their custom code, any binary based on Realtek SDK webserver will probably contains its own set of issues on top of the Realtek ones (if kept). Successful exploitation of these issues allows remote attackers to gain arbitrary code execution on the device.
CVE-2021-35033 A vulnerability in specific versions of Zyxel NBG6818, NBG7815, WSQ20, WSQ50, WSQ60, and WSR30 firmware with pre-configured password management could allow an attacker to obtain root access of the device, if the local attacker dismantles the device and uses a USB-to-UART cable to connect the device, or if the remote assistance feature had been enabled by an authenticated user.
CVE-2021-35031 A vulnerability in the TFTP client of Zyxel GS1900 series firmware, XGS1210 series firmware, and XGS1250 series firmware, which could allow an authenticated LAN user to execute arbitrary OS commands via the GUI of the vulnerable device.
CVE-2021-35029 An authentication bypasss vulnerability in the web-based management interface of Zyxel USG/Zywall series firmware versions 4.35 through 4.64 and USG Flex, ATP, and VPN series firmware versions 4.35 through 5.01, which could allow a remote attacker to execute arbitrary commands on an affected device.
CVE-2021-34830 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1330 1.13B01 BETA routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the Cookie HTTP header. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-12028.
CVE-2021-34829 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1330 1.13B01 BETA routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the HNAP_AUTH HTTP header. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-12065.
CVE-2021-34828 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1330 1.13B01 BETA routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the SOAPAction HTTP header. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-12066.
CVE-2021-34827 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1330 1.13B01 BETA routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the SOAPAction HTTP header. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-12029.
CVE-2021-34788 A vulnerability in the shared library loading mechanism of Cisco AnyConnect Secure Mobility Client for Linux and Mac OS could allow an authenticated, local attacker to perform a shared library hijacking attack on an affected device if the VPN Posture (HostScan) Module is installed on the AnyConnect client. This vulnerability is due to a race condition in the signature verification process for shared library files that are loaded on an affected device. An attacker could exploit this vulnerability by sending a series of crafted interprocess communication (IPC) messages to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected device with root privileges. To exploit this vulnerability, the attacker must have a valid account on the system.
CVE-2021-34784 A vulnerability in the web-based management interface of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network Manager (EPNM) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user of an affected interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
CVE-2021-34782 A vulnerability in the API endpoints for Cisco DNA Center could allow an authenticated, remote attacker to gain access to sensitive information that should be restricted. The attacker must have valid device credentials. This vulnerability is due to improper access controls on API endpoints. An attacker could exploit the vulnerability by sending a specific API request to an affected application. A successful exploit could allow the attacker to obtain sensitive information about other users who are configured with higher privileges on the application.
CVE-2021-34765 A vulnerability in the web UI for Cisco Nexus Insights could allow an authenticated, remote attacker to view and download files related to the web application. The attacker requires valid device credentials. This vulnerability exists because proper role-based access control (RBAC) filters are not applied to file download actions. An attacker could exploit this vulnerability by logging in to the application and then navigating to the directory listing and download functions. A successful exploit could allow the attacker to download sensitive files that should be restricted, which could result in disclosure of sensitive information.
CVE-2021-34762 A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to perform a directory traversal attack on an affected device. The attacker would require valid device credentials. The vulnerability is due to insufficient input validation of the HTTPS URL by the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTPS request that contains directory traversal character sequences to an affected device. A successful exploit could allow the attacker to read or write arbitrary files on the device.
CVE-2021-34761 A vulnerability in Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to overwrite or append arbitrary data to system files using root-level privileges. The attacker must have administrative credentials on the device. This vulnerability is due to incomplete validation of user input for a specific CLI command. An attacker could exploit this vulnerability by authenticating to the device with administrative privileges and issuing a CLI command with crafted user parameters. A successful exploit could allow the attacker to overwrite or append arbitrary data to system files using root-level privileges.
CVE-2021-34758 A vulnerability in the memory management of Cisco TelePresence Collaboration Endpoint (CE) Software and Cisco RoomOS Software could allow an authenticated, local attacker to corrupt a shared memory segment, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient access controls to a shared memory resource. An attacker could exploit this vulnerability by corrupting a shared memory segment on an affected device. A successful exploit could allow the attacker to cause the device to reload. The device will recover from the corruption upon reboot.
CVE-2021-34748 A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.
CVE-2021-34746 A vulnerability in the TACACS+ authentication, authorization and accounting (AAA) feature of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to bypass authentication and log in to an affected device as an administrator. This vulnerability is due to incomplete validation of user-supplied input that is passed to an authentication script. An attacker could exploit this vulnerability by injecting parameters into an authentication request. A successful exploit could allow the attacker to bypass authentication and log in as an administrator to the affected device.
CVE-2021-34745 A vulnerability in the AppDynamics .NET Agent for Windows could allow an attacker to leverage an authenticated, local user account to gain SYSTEM privileges. This vulnerability is due to the .NET Agent Coordinator Service executing code with SYSTEM privileges. An attacker with local access to a device that is running the vulnerable agent could create a custom process that would be launched with those SYSTEM privileges. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system. This vulnerability is fixed in AppDynamics .NET Agent Release 21.7.
CVE-2021-34729 A vulnerability in the CLI of Cisco IOS XE SD-WAN Software and Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges on an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input in the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system. An attacker would need valid user credentials to exploit this vulnerability.
CVE-2021-34728 Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-34726 A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root-level privileges on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root-level privileges.
CVE-2021-34725 A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root-level privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root-level privileges.
CVE-2021-34724 A vulnerability in the Cisco IOS XE SD-WAN Software CLI could allow an authenticated, local attacker to elevate privileges and execute arbitrary code on the underlying operating system as the root user. An attacker must be authenticated on an affected device as a PRIV15 user. This vulnerability is due to insufficient file system protection and the presence of a sensitive file in the bootflash directory on an affected device. An attacker could exploit this vulnerability by overwriting an installer file stored in the bootflash directory with arbitrary commands that can be executed with root-level privileges. A successful exploit could allow the attacker to read and write changes to the configuration database on the affected device.
CVE-2021-34723 A vulnerability in a specific CLI command that is run on Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to overwrite arbitrary files in the configuration database of an affected device. This vulnerability is due to insufficient validation of specific CLI command parameters. An attacker could exploit this vulnerability by issuing that command with specific parameters. A successful exploit could allow the attacker to overwrite the content of the configuration database and gain root-level access to an affected device.
CVE-2021-34722 Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to gain access to the underlying root shell of an affected device and execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-34721 Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to gain access to the underlying root shell of an affected device and execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-34719 Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-34718 A vulnerability in the SSH Server process of Cisco IOS XR Software could allow an authenticated, remote attacker to overwrite and read arbitrary files on the local device. This vulnerability is due to insufficient input validation of arguments that are supplied by the user for a specific file transfer method. An attacker with lower-level privileges could exploit this vulnerability by specifying Secure Copy Protocol (SCP) parameters when authenticating to a device. A successful exploit could allow the attacker to elevate their privileges and retrieve and upload files on a device that they should not have access to.
CVE-2021-34716 A vulnerability in the web-based management interface of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system as the root user. This vulnerability is due to incorrect handling of certain crafted software images that are uploaded to the affected device. An attacker could exploit this vulnerability by authenticating to the system as an administrative user and then uploading specific crafted software images to the affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system as the root user.
CVE-2021-34711 A vulnerability in the debug shell of Cisco IP Phone software could allow an authenticated, local attacker to read any file on the device file system. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by providing crafted input to a debug shell command. A successful exploit could allow the attacker to read any file on the device file system.
CVE-2021-34706 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to access sensitive information or conduct a server-side request forgery (SSRF) attack through an affected device. This vulnerability is due to improper handling of XML External Entity (XXE) entries when parsing certain XML files. An attacker could exploit this vulnerability by uploading a crafted XML file that contains references to external entities. A successful exploit could allow the attacker to retrieve files from the local system, resulting in the disclosure of sensitive information, or cause the web application to perform arbitrary HTTP requests on behalf of the attacker.
CVE-2021-34703 A vulnerability in the Link Layer Discovery Protocol (LLDP) message parser of Cisco IOS Software and Cisco IOS XE Software could allow an attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper initialization of a buffer. An attacker could exploit this vulnerability via any of the following methods: An authenticated, remote attacker could access the LLDP neighbor table via either the CLI or SNMP while the device is in a specific state. An unauthenticated, adjacent attacker could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then waiting for an administrator of the device or a network management system (NMS) managing the device to retrieve the LLDP neighbor table of the device via either the CLI or SNMP. An authenticated, adjacent attacker with SNMP read-only credentials or low privileges on the device CLI could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then accessing the LLDP neighbor table via either the CLI or SNMP. A successful exploit could allow the attacker to cause the affected device to crash, resulting in a reload of the device.
CVE-2021-34701 A vulnerability in the web-based management interface of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), Cisco Unified Communications Manager IM &amp; Presence Service (Unified CM IM&amp;P), and Cisco Unity Connection could allow an authenticated, remote attacker to access sensitive data on an affected device. This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request that contains directory traversal character sequences to an affected system. A successful exploit could allow the attacker to access sensitive files on the affected system.
CVE-2021-34699 A vulnerability in the TrustSec CLI parser of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. This vulnerability is due to an improper interaction between the web UI and the CLI parser. An attacker could exploit this vulnerability by requesting a particular CLI command to be run through the web UI. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.
CVE-2021-3458 The Motorola MM1000 device configuration portal can be accessed without authentication, which could allow adapter settings to be modified.
CVE-2021-34578 This vulnerability allows an attacker who has access to the WBM to read and write settings-parameters of the device by sending specifically constructed requests without authentication on multiple WAGO PLCs in firmware versions up to FW07.
CVE-2021-33882 A Missing Authentication for Critical Function vulnerability in B. Braun SpaceCom2 prior to 012U000062 allows a remote attacker to reconfigure the device from an unknown source because of lack of authentication on proprietary networking commands.
CVE-2021-33842 Improper Authentication vulnerability in the cookie parameter of Circutor SGE-PLC1000 firmware version 0.9.2b allows an attacker to perform operations as an authenticated user. In order to exploit this vulnerability, the attacker must be within the network where the device affected is located.
CVE-2021-33543 Multiple camera devices by UDP Technology, Geutebrück and other vendors allow unauthenticated remote access to sensitive files due to default user authentication settings. This can lead to manipulation of the device and denial of service.
CVE-2021-33541 Phoenix Contact Classic Line Controllers ILC1x0 and ILC1x1 in all versions/variants are affected by a Denial-of-Service vulnerability. The communication protocols and device access do not feature authentication measures. Remote attackers can use specially crafted IP packets to cause a denial of service on the PLC's network communication module. A successful attack stops all network communication. To restore the network connectivity the device needs to be restarted. The automation task is not affected.
CVE-2021-33539 In Weidmueller Industrial WLAN devices in multiple versions an exploitable authentication bypass vulnerability exists in the hostname processing. A specially configured device hostname can cause the device to interpret selected remote traffic as local traffic, resulting in a bypass of web authentication. An attacker can send authenticated SNMP requests to trigger this vulnerability.
CVE-2021-33538 In Weidmueller Industrial WLAN devices in multiple versions an exploitable improper access control vulnerability exists in the iw_webs account settings functionality. A specially crafted user name entry can cause the overwrite of an existing user account password, resulting in remote shell access to the device as that user. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.
CVE-2021-33534 In Weidmueller Industrial WLAN devices in multiple versions an exploitable command injection vulnerability exists in the hostname functionality. A specially crafted entry to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send various requests while authenticated as a high privilege user to trigger this vulnerability.
CVE-2021-33533 In Weidmueller Industrial WLAN devices in multiple versions an exploitable command injection vulnerability exists in the iw_webs functionality. A specially crafted iw_serverip parameter can cause user input to be reflected in a subsequent iw_system call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.
CVE-2021-33532 In Weidmueller Industrial WLAN devices in multiple versions an exploitable command injection vulnerability exists in the iw_webs functionality. A specially crafted diagnostic script file name can cause user input to be reflected in a subsequent iw_system call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.
CVE-2021-33531 In Weidmueller Industrial WLAN devices in multiple versions an exploitable use of hard-coded credentials vulnerability exists in multiple iw_* utilities. The device operating system contains an undocumented encryption password, allowing for the creation of custom diagnostic scripts. An attacker can send diagnostic scripts while authenticated as a low privilege user to trigger this vulnerability.
CVE-2021-33530 In Weidmueller Industrial WLAN devices in multiple versions an exploitable command injection vulnerability exists in encrypted diagnostic script functionality of the devices. A specially crafted diagnostic script file can cause arbitrary busybox commands to be executed, resulting in remote control over the device. An attacker can send diagnostic while authenticated as a low privilege user to trigger this vulnerability.
CVE-2021-33045 The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.
CVE-2021-33044 The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.
CVE-2021-32967 Delta Electronics DIAEnergie Version 1.7.5 and prior may allow an attacker to add a new administrative user without being authenticated or authorized, which may allow the attacker to log in and use the device with administrative privileges.
CVE-2021-32800 Nextcloud server is an open source, self hosted personal cloud. In affected versions an attacker is able to bypass Two Factor Authentication in Nextcloud. Thus knowledge of a password, or access to a WebAuthN trusted device of a user was sufficient to gain access to an account. It is recommended that the Nextcloud Server is upgraded to 20.0.12, 21.0.4 or 22.1.0. There are no workaround for this vulnerability.
CVE-2021-32489 An issue was discovered in the _send_secure_msg() function of Yubico yubihsm-shell through 2.0.3. The function does not correctly validate the embedded length field of an authenticated message received from the device because response_msg.st.len=8 can be accepted but triggers an integer overflow, which causes CRYPTO_cbc128_decrypt (in OpenSSL) to encounter an undersized buffer and experience a segmentation fault. The yubihsm-shell project is included in the YubiHSM 2 SDK product.
CVE-2021-32459 Trend Micro Home Network Security version 6.6.604 and earlier contains a hard-coded password vulnerability in the log collection server which could allow an attacker to use a specially crafted network request to lead to arbitrary authentication. An attacker must first obtain the ability to execute high-privileged code on the target device in order to exploit this vulnerability.
CVE-2021-32456 SITEL CAP/PRX firmware version 5.2.01 allows an attacker with access to the local network of the device to obtain the authentication passwords by analysing the network traffic.
CVE-2021-32453 SITEL CAP/PRX firmware version 5.2.01 allows an attacker with access to the local network, to access via HTTP to the internal configuration database of the device without any authentication. An attacker could exploit this vulnerability in order to obtain information about the device´s configuration.
CVE-2021-32033 Protectimus SLIM NFC 70 10.01 devices allow a Time Traveler attack in which attackers can predict TOTP passwords in certain situations. The time value used by the device can be set independently from the used seed value for generating time-based one-time passwords, without authentication. Thus, an attacker with short-time physical access to a device can set the internal real-time clock (RTC) to the future, generate one-time passwords, and reset the clock to the current time. This allows the generation of valid future time-based one-time passwords without having further access to the hardware token.
CVE-2021-32030 The administrator application on ASUS GT-AC2900 devices before 3.0.0.4.386.42643 allows authentication bypass when processing remote input from an unauthenticated user, leading to unauthorized access to the administrator interface. This relates to handle_request in router/httpd/httpd.c and auth_check in web_hook.o. An attacker-supplied value of '\0' matches the device's default value of '\0' in some situations.
CVE-2021-31505 This vulnerability allows attackers with physical access to escalate privileges on affected installations of Arlo Q Plus 1.9.0.3_278. Authentication is not required to exploit this vulnerability. The specific flaw exists within the SSH service. The device can be booted into a special operation mode where hard-coded credentials are accepted for SSH authentication. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-12890.
CVE-2021-31477 This vulnerability allows remote attackers to execute arbitrary code on affected installations of GE Reason RPV311 14A03. Authentication is not required to exploit this vulnerability. The specific flaw exists within the firmware and filesystem of the device. The firmware and filesystem contain hard-coded default credentials. An attacker can leverage this vulnerability to execute code in the context of the download user. Was ZDI-CAN-11852.
CVE-2021-3145 In Ionic Identity Vault before 5, a local root attacker on an Android device can bypass biometric authentication.
CVE-2021-31378 In broadband environments, including but not limited to Enhanced Subscriber Management, (CHAP, PPP, DHCP, etc.), on Juniper Networks Junos OS devices where RADIUS servers are configured for managing subscriber access and a subscriber is logged in and then requests to logout, the subscriber may be forced into a "Terminating" state by an attacker who is able to send spoofed messages appearing to originate from trusted RADIUS server(s) destined to the device in response to the subscriber's request. These spoofed messages cause the Junos OS General Authentication Service (authd) daemon to force the broadband subscriber into this "Terminating" state which the subscriber will not recover from thereby causing a Denial of Service (DoS) to the endpoint device. Once in the "Terminating" state, the endpoint subscriber will no longer be able to access the network. Restarting the authd daemon on the Junos OS device will temporarily clear the subscribers out of the "Terminating" state. As long as the attacker continues to send these spoofed packets and subscribers request to be logged out, the subscribers will be returned to the "Terminating" state thereby creating a persistent Denial of Service to the subscriber. An indicator of compromise may be seen by displaying the output of "show subscribers summary". The presence of subscribers in the "Terminating" state may indicate the issue is occurring. This issue affects: Juniper Networks Junos OS 17.3 versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R2-S8, 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R1-S4, 19.4R1-S4, 19.4R3-S3; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R3-S1; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2. This issue does not affect: Juniper Networks Junos OS 12.3 version 12.3R1 and later versions; 15.1 version 15.1R1 and later versions.
CVE-2021-31372 An Improper Input Validation vulnerability in J-Web of Juniper Networks Junos OS allows a locally authenticated J-Web attacker to escalate their privileges to root over the target device. This issue affects: Juniper Networks Junos OS All versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R3-S3; 19.3 versions prior to 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2;
CVE-2021-31355 A persistent cross-site scripting (XSS) vulnerability in the captive portal graphical user interface of Juniper Networks Junos OS may allow a remote authenticated user to inject web script or HTML and steal sensitive data and credentials from a web administration session, possibly tricking a follow-on administrative user to perform administrative actions on the device. This issue affects Juniper Networks Junos OS: All versions, including the following supported releases: 12.3X48 versions prior to 12.3X48-D105; 15.1X49 versions prior to 15.1X49-D220; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S7; 19.2 versions prior to 19.2R3-S3; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R1-S1, 20.2R2; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R2; 21.1 versions prior to 21.1R2.
CVE-2021-31337 The Telnet service of the SIMATIC HMI Comfort Panels system component in affected products does not require authentication, which may allow a remote attacker to gain access to the device if the service is enabled. Telnet is disabled by default on the SINAMICS Medium Voltage Products (SINAMICS SL150: All versions, SINAMICS SM150: All versions, SINAMICS SM150i: All versions).
CVE-2021-31251 An authentication bypass in telnet server in BF-430 and BF431 232/422 TCP/IP Converter, BF-450M and SEMAC from CHIYU Technology Inc allows obtaining a privileged connection with the target device by supplying a specially malformed request and an attacker may force the remote telnet server to believe that the user has already authenticated.
CVE-2021-30948 An inconsistent user interface issue was addressed with improved state management. This issue is fixed in iOS 15.2 and iPadOS 15.2. A person with physical access to an iOS device may be able to access stored passwords without authentication.
CVE-2021-3055 An improper restriction of XML external entity (XXE) reference vulnerability in the Palo Alto Networks PAN-OS web interface enables an authenticated administrator to read any arbitrary file from the file system and send a specifically crafted request to the firewall that causes the service to crash. Repeated attempts to send this request result in denial of service to all PAN-OS services by restarting the device and putting it into maintenance mode. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14; PAN-OS 9.1 versions earlier than PAN-OS 9.1.10; PAN-OS 10.0 versions earlier than PAN-OS 10.0.6. This issue does not affect Prisma Access.
CVE-2021-30167 The manage users profile services of the network camera device allows an authenticated. Remote attackers can modify URL parameters and further amend user&#8217;s information and escalate privileges to control the devices.
CVE-2021-28653 The iOS and macOS apps before 1.4.1 for the Western Digital G-Technology ArmorLock NVMe SSD store keys insecurely. They choose a non-preferred storage mechanism if the device has Secure Enclave support but lacks biometric authentication hardware.
CVE-2021-28506 An issue has recently been discovered in Arista EOS where certain gNOI APIs incorrectly skip authorization and authentication which could potentially allow a factory reset of the device.
CVE-2021-28503 The impact of this vulnerability is that Arista's EOS eAPI may skip re-evaluating user credentials when certificate based authentication is used, which allows remote attackers to access the device via eAPI.
CVE-2021-28496 On systems running Arista EOS and CloudEOS with the affected release version, when using shared secret profiles the password configured for use by BiDirectional Forwarding Detection (BFD) will be leaked when displaying output over eAPI or other JSON outputs to other authenticated users on the device. The affected EOS Versions are: all releases in 4.22.x train, 4.23.9 and below releases in the 4.23.x train, 4.24.7 and below releases in the 4.24.x train, 4.25.4 and below releases in the 4.25.x train, 4.26.1 and below releases in the 4.26.x train
CVE-2021-27561 Yealink Device Management (DM) 3.6.0.20 allows command injection as root via the /sm/api/v1/firewall/zone/services URI, without authentication.
CVE-2021-27217 An issue was discovered in the _send_secure_msg() function of Yubico yubihsm-shell through 2.0.3. The function does not correctly validate the embedded length field of an authenticated message received from the device. Out-of-bounds reads performed by aes_remove_padding() can crash the running process, depending on the memory layout. This could be used by an attacker to cause a client-side denial of service. The yubihsm-shell project is included in the YubiHSM 2 SDK product.
CVE-2021-27139 An issue was discovered on FiberHome HG6245D devices through RP2613. It is possible to extract information from the device without authentication by disabling JavaScript and visiting /info.asp.
CVE-2021-26964 A remote authentication restriction bypass vulnerability was discovered in Aruba AirWave Management Platform version(s): Prior to 8.2.12.0. A vulnerability in the AirWave web-based management interface could allow an authenticated remote attacker to improperly access and modify devices and management user details. A successful exploit would consist of an attacker using a lower privileged account to change management user or device details. This could allow the attacker to escalate privileges and/or change network details that they should not have access to.
CVE-2021-26637 There is no account authentication and permission check logic in the firmware and existing apps of SiHAS's SGW-300, ACM-300, GCM-300, so unauthorized users can remotely control the device.
CVE-2021-25917 In OpenEMR, versions 5.0.2 to 6.0.0 are vulnerable to Stored Cross-Site-Scripting (XSS) due to user input not being validated properly and rendered in the U2F USB Device authentication method page. A highly privileged attacker could inject arbitrary code into input fields when creating a new user.
CVE-2021-25910 Improper Authentication vulnerability in the cookie parameter of ZIV AUTOMATION 4CCT-EA6-334126BF allows a local attacker to perform modifications in several parameters of the affected device as an authenticated user.
CVE-2021-25676 A vulnerability has been identified in RUGGEDCOM RM1224 (V6.3), SCALANCE M-800 (V6.3), SCALANCE S615 (V6.3), SCALANCE SC-600 (All Versions >= V2.1 and < V2.1.3). Multiple failed SSH authentication attempts could trigger a temporary Denial-of-Service under certain conditions. When triggered, the device will reboot automatically.
CVE-2021-25424 Improper authentication vulnerability in Tizen bluetooth-frwk prior to Firmware update JUN-2021 Release allows bluetooth attacker to take over the user's bluetooth device without user awareness.
CVE-2021-25328 Skyworth Digital Technology RN510 V.3.1.0.4 RN510 V.3.1.0.4 contains a buffer overflow vulnerability in /cgi-bin/app-staticIP.asp. An authenticated attacker can send a specially crafted request to endpoint which can lead to a denial of service (DoS) or possible code execution on the device.
CVE-2021-23858 Information disclosure: The main configuration, including users and their hashed passwords, is exposed by an unprotected web server resource and can be accessed without authentication. Additionally, device details are exposed which include the serial number and the firmware version by another unprotected web server resource.
CVE-2021-23847 A Missing Authentication in Critical Function in Bosch IP cameras allows an unauthenticated remote attacker to extract sensitive information or change settings of the camera by sending crafted requests to the device. Only devices of the CPP6, CPP7 and CPP7.3 family with firmware 7.70, 7.72, and 7.80 prior to B128 are affected by this vulnerability. Versions 7.62 or lower and INTEOX cameras are not affected.
CVE-2021-23147 Netgear Nighthawk R6700 version 1.0.4.120 does not have sufficient protections for the UART console. A malicious actor with physical access to the device is able to connect to the UART port via a serial connection and execute commands as the root user without authentication.
CVE-2021-22995 On all 7.x and 6.x versions (fixed in 8.0.0), BIG-IQ high availability (HA) when using a Quorum device for automatic failover does not implement any form of authentication with the Corosync daemon. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.
CVE-2021-22934 A vulnerability in Pulse Connect Secure before 9.1R12 could allow an authenticated administrator or compromised Pulse Connect Secure device in a load-balanced configuration to perform a buffer overflow via a malicious crafted web request.
CVE-2021-22793 A CWE-200: Exposure of Sensitive Information to an Unauthorized Actor vulnerability exist in AccuSine PCS+ / PFV+ (Versions prior to V1.6.7) and AccuSine PCSn (Versions prior to V2.2.4) that could allow an authenticated attacker to access the device via FTP protocol.
CVE-2021-22764 A CWE-287: Improper Authentication vulnerability exists in PowerLogic PM55xx, PowerLogic PM8ECC, PowerLogic EGX100 and PowerLogic EGX300 (see security notification for version infromation) that could cause loss of connectivity to the device via Modbus TCP protocol when an attacker sends a specially crafted HTTP request.
CVE-2021-22360 There is a resource management error vulnerability in the verisions V500R001C60SPC500, V500R005C00SPC100, V500R005C00SPC200 of USG9500. An authentication attacker needs to perform specific operations to exploit the vulnerability on the affected device. Due to improper resource management of the function, the vulnerability can be exploited to cause service abnormal on affected devices.
CVE-2021-22316 There is a Missing Authentication for Critical Function vulnerability in Huawei Smartphone. Attackers with physical access to the device can thereby exploit this vulnerability. A successful exploitation of this vulnerability can compromise the device's data security and functional availability.
CVE-2021-21952 An authentication bypass vulnerability exists in the CMD_DEVICE_GET_RSA_KEY_REQUEST functionality of the home_security binary of Anker Eufy Homebase 2 2.1.6.9h. A specially-crafted set of network packets can lead to increased privileges.
CVE-2021-21905 Stack-based buffer overflow vulnerability exists in how the CMA readfile function of Garrett Metal Detectors iC Module CMA Version 5.0 is used at various locations. The Garrett iC Module exposes an authenticated CLI over TCP port 6877. This interface is used by a secondary GUI client, called &#8220;CMA Connect&#8221;, to interact with the iC Module on behalf of the user. After a client successfully authenticates, they can send plaintext commands to manipulate the device.
CVE-2021-20697 Missing authentication for critical function in DAP-1880AC firmware version 1.21 and earlier allows a remote attacker to login to the device as an authenticated user without the access privilege via unspecified vectors.
CVE-2021-20650 Cross-site request forgery (CSRF) vulnerability in ELECOM NCC-EWF100RMWH2 allows remote attackers to hijack the authentication of administrators and execute an arbitrary request via unspecified vector. As a result, the device settings may be altered and/or telnet daemon may be started.
CVE-2021-20647 Cross-site request forgery (CSRF) vulnerability in ELECOM WRC-300FEBK-S allows remote attackers to hijack the authentication of administrators and execute an arbitrary request via unspecified vector. As a result, the device settings may be altered and/or telnet daemon may be started.
CVE-2021-20646 Cross-site request forgery (CSRF) vulnerability in ELECOM WRC-300FEBK-A allows remote attackers to hijack the authentication of administrators and execute an arbitrary request via unspecified vector. As a result, the device settings may be altered and/or telnet daemon may be started.
CVE-2021-20641 Cross-site request forgery (CSRF) vulnerability in LOGITEC LAN-W300N/RS allows remote attackers to hijack the authentication of administrators via a specially crafted URL. As a result, unintended operations to the device such as changes of the device settings may be conducted.
CVE-2021-20636 Cross-site request forgery (CSRF) vulnerability in LOGITEC LAN-W300N/PR5B allows remote attackers to hijack the authentication of administrators via a specially crafted URL. As a result, unintended operations to the device such as changes of the device settings may be conducted.
CVE-2021-20635 Improper restriction of excessive authentication attempts in LOGITEC LAN-WH450N/GR allows an attacker in the wireless range of the device to recover PIN and access the network.
CVE-2021-20134 Quagga Services on D-Link DIR-2640 less than or equal to version 1.11B02 are affected by an absolute path traversal vulnerability that allows a remote, authenticated attacker to set an arbitrary file on the router's filesystem as the log file used by either Quagga service (zebra or ripd). Subsequent log messages will be appended to the file, prefixed by a timestamp and some logging metadata. Remote code execution can be achieved by using this vulnerability to append to a shell script on the router's filesystem, and then awaiting or triggering the execution of that script. A remote, unauthenticated root shell can easily be obtained on the device in this fashion.
CVE-2021-20122 The Telus Wi-Fi Hub (PRV65B444A-S-TS) with firmware version 3.00.20 is affected by an authenticated command injection vulnerability in multiple parameters passed to tr69_cmd.cgi. A remote attacker connected to the router's LAN and authenticated with a super user account, or using a bypass authentication vulnerability like CVE-2021-20090 could leverage this issue to run commands or gain a shell as root on the target device.
CVE-2021-20121 The Telus Wi-Fi Hub (PRV65B444A-S-TS) with firmware version 3.00.20 is vulnerable to an authenticated arbitrary file read. An authenticated user with physical access to the device can read arbitrary files from the device by preparing and connecting a specially prepared USB drive to the device, and making a series of crafted requests to the device's web interface.
CVE-2021-20091 The web interfaces of Buffalo WSR-2533DHPL2 firmware version <= 1.02 and WSR-2533DHP3 firmware version <= 1.24 do not properly sanitize user input. An authenticated remote attacker could leverage this vulnerability to alter device configuration, potentially gaining remote code execution.
CVE-2021-1863 An issue existed with authenticating the action triggered by an NFC tag. The issue was addressed with improved action authentication. This issue is fixed in iOS 14.5 and iPadOS 14.5. A person with physical access to an iOS device may be able to place phone calls to any phone number.
CVE-2021-1623 A vulnerability in the Simple Network Management Protocol (SNMP) punt handling function of Cisco cBR-8 Converged Broadband Routers could allow an authenticated, remote attacker to overload a device punt path, resulting in a denial of service (DoS) condition. This vulnerability is due to the punt path being overwhelmed by large quantities of SNMP requests. An attacker could exploit this vulnerability by sending a large number of SNMP requests to an affected device. A successful exploit could allow the attacker to overload the device punt path, resulting in a DoS condition.
CVE-2021-1620 A vulnerability in the Internet Key Exchange Version 2 (IKEv2) support for the AutoReconnect feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to exhaust the free IP addresses from the assigned local pool. This vulnerability occurs because the code does not release the allocated IP address under certain failure conditions. An attacker could exploit this vulnerability by trying to connect to the device with a non-AnyConnect client. A successful exploit could allow the attacker to exhaust the IP addresses from the assigned local pool, which prevents users from logging in and leads to a denial of service (DoS) condition.
CVE-2021-1619 A vulnerability in the authentication, authorization, and accounting (AAA) function of Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass NETCONF or RESTCONF authentication and do either of the following: Install, manipulate, or delete the configuration of an affected device Cause memory corruption that results in a denial of service (DoS) on an affected device This vulnerability is due to an uninitialized variable. An attacker could exploit this vulnerability by sending a series of NETCONF or RESTCONF requests to an affected device. A successful exploit could allow the attacker to use NETCONF or RESTCONF to install, manipulate, or delete the configuration of a network device or to corrupt memory on the device, resulting a DoS.
CVE-2021-1612 A vulnerability in the Cisco IOS XE SD-WAN Software CLI could allow an authenticated, local attacker to overwrite arbitrary files on the local system. This vulnerability is due to improper access controls on files within the local file system. An attacker could exploit this vulnerability by placing a symbolic link in a specific location on the local file system. A successful exploit could allow the attacker to overwrite arbitrary files on an affected device.
CVE-2021-1599 A vulnerability in the web-based management interface of Cisco Unified Customer Voice Portal (CVP) could allow an authenticated, remote attacker to perform a cross-site scripting (XSS) attack against a user. This vulnerability is due to insufficient input validation of a parameter that is used by the web-based management interface. An attacker could exploit this vulnerability by persuading a user to click a malicious link. A successful exploit could allow the attacker to execute arbitrary code in the context of the interface, access sensitive, browser-based information, or cause an affected device to reboot under certain conditions.
CVE-2021-1593 A vulnerability in Cisco Packet Tracer for Windows could allow an authenticated, local attacker to perform a DLL injection attack on an affected device. To exploit this vulnerability, the attacker must have valid credentials on the Windows system. This vulnerability is due to incorrect handling of directory paths at run time. An attacker could exploit this vulnerability by inserting a configuration file in a specific path on the system, which can cause a malicious DLL file to be loaded when the application starts. A successful exploit could allow an attacker with normal user privileges to execute arbitrary code on the affected system with the privileges of another user&rsquo;s account.
CVE-2021-1592 A vulnerability in the way Cisco UCS Manager software handles SSH sessions could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper resource management for established SSH sessions. An attacker could exploit this vulnerability by opening a significant number of SSH sessions on an affected device. A successful exploit could allow the attacker to cause a crash and restart of internal Cisco UCS Manager software processes and a temporary loss of access to the Cisco UCS Manager CLI and web UI. Note: The attacker must have valid user credentials to authenticate to the affected device.
CVE-2021-1590 A vulnerability in the implementation of the system login block-for command for Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a login process to unexpectedly restart, causing a denial of service (DoS) condition. This vulnerability is due to a logic error in the implementation of the system login block-for command when an attack is detected and acted upon. An attacker could exploit this vulnerability by performing a brute-force login attack on an affected device. A successful exploit could allow the attacker to cause a login process to reload, which could result in a delay during authentication to the affected device.
CVE-2021-1584 A vulnerability in Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient restrictions during the execution of a specific CLI command. An attacker with administrative privileges could exploit this vulnerability by performing a command injection attack on the vulnerable command. A successful exploit could allow the attacker to access the underlying operating system as root.
CVE-2021-1583 A vulnerability in the fabric infrastructure file system access control of Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to read arbitrary files on an affected system. This vulnerability is due to improper access control. An attacker with Administrator privileges could exploit this vulnerability by executing a specific vulnerable command on an affected device. A successful exploit could allow the attacker to read arbitrary files on the file system of the affected device.
CVE-2021-1579 A vulnerability in an API endpoint of Cisco Application Policy Infrastructure Controller (APIC) and Cisco Cloud Application Policy Infrastructure Controller (Cloud APIC) could allow an authenticated, remote attacker with Administrator read-only credentials to elevate privileges on an affected system. This vulnerability is due to an insufficient role-based access control (RBAC). An attacker with Administrator read-only credentials could exploit this vulnerability by sending a specific API request using an app with admin write credentials. A successful exploit could allow the attacker to elevate privileges to Administrator with write privileges on the affected device.
CVE-2021-1578 A vulnerability in an API endpoint of Cisco Application Policy Infrastructure Controller (APIC) and Cisco Cloud Application Policy Infrastructure Controller (Cloud APIC) could allow an authenticated, remote attacker to elevate privileges to Administrator on an affected device. This vulnerability is due to an improper policy default setting. An attacker could exploit this vulnerability by using a non-privileged credential for Cisco ACI Multi-Site Orchestrator (MSO) to send a specific API request to a managed Cisco APIC or Cloud APIC device. A successful exploit could allow the attacker to obtain Administrator credentials on the affected device.
CVE-2021-1572 A vulnerability in ConfD could allow an authenticated, local attacker to execute arbitrary commands at the level of the account under which ConfD is running, which is commonly root. To exploit this vulnerability, an attacker must have a valid account on an affected device. The vulnerability exists because the affected software incorrectly runs the SFTP user service at the privilege level of the account that was running when the ConfD built-in Secure Shell (SSH) server for CLI was enabled. If the ConfD built-in SSH server was not enabled, the device is not affected by this vulnerability. An attacker with low-level privileges could exploit this vulnerability by authenticating to an affected device and issuing a series of commands at the SFTP interface. A successful exploit could allow the attacker to elevate privileges to the level of the account under which ConfD is running, which is commonly root. Note: Any user who can authenticate to the built-in SSH server may exploit this vulnerability. By default, all ConfD users have this access if the server is enabled. Software updates that address this vulnerability have been released.
CVE-2021-1567 A vulnerability in the DLL loading mechanism of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack on an affected device if the VPN Posture (HostScan) Module is installed on the AnyConnect client. This vulnerability is due to a race condition in the signature verification process for DLL files that are loaded on an affected device. An attacker could exploit this vulnerability by sending a series of crafted interprocess communication (IPC) messages to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected device with SYSTEM privileges. To exploit this vulnerability, the attacker must have valid credentials on the Windows system.
CVE-2021-1562 A vulnerability in the XSI-Actions interface of Cisco BroadWorks Application Server could allow an authenticated, remote attacker to access sensitive information on an affected system. This vulnerability is due to improper input validation and authorization of specific commands that a user can execute within the XSI-Actions interface. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a specific set of commands. A successful exploit could allow the attacker to join a Call Center instance and have calls that they do not have permissions to access distributed to them from the Call Center queue. At the time of publication, Cisco had not released updates that address this vulnerability for Cisco BroadWorks Application Server. However, firmware patches are available.
CVE-2021-1560 Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, remote attacker to perform a command injection attack on an affected device. These vulnerabilities are due to insufficient input sanitization when executing affected commands. A high-privileged attacker could exploit these vulnerabilities on a Cisco DNA Spaces Connector by injecting crafted input during command execution. A successful exploit could allow the attacker to execute arbitrary commands as root within the Connector docker container.
CVE-2021-1559 Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, remote attacker to perform a command injection attack on an affected device. These vulnerabilities are due to insufficient input sanitization when executing affected commands. A high-privileged attacker could exploit these vulnerabilities on a Cisco DNA Spaces Connector by injecting crafted input during command execution. A successful exploit could allow the attacker to execute arbitrary commands as root within the Connector docker container.
CVE-2021-1555 Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.
CVE-2021-1554 Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.
CVE-2021-1553 Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.
CVE-2021-1552 Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.
CVE-2021-1551 Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.
CVE-2021-1550 Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.
CVE-2021-1549 Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.
CVE-2021-1548 Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.
CVE-2021-1547 Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.
CVE-2021-1540 Multiple vulnerabilities in the authorization process of Cisco ASR 5000 Series Software (StarOS) could allow an authenticated, remote attacker to bypass authorization and execute a subset of CLI commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1539 Multiple vulnerabilities in the authorization process of Cisco ASR 5000 Series Software (StarOS) could allow an authenticated, remote attacker to bypass authorization and execute a subset of CLI commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1536 A vulnerability in Cisco Webex Meetings Desktop App for Windows, Cisco Webex Meetings Server, Cisco Webex Network Recording Player for Windows, and Cisco Webex Teams for Windows could allow an authenticated, local attacker to perform a DLL injection attack on an affected device. To exploit this vulnerability, the attacker must have valid credentials on the Windows system. This vulnerability is due to incorrect handling of directory paths at run time. An attacker could exploit this vulnerability by inserting a configuration file in a specific path in the system, which can cause a malicious DLL file to be loaded when the application starts. A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of another user account.
CVE-2021-1532 A vulnerability in the video endpoint API (xAPI) of Cisco TelePresence Collaboration Endpoint (CE) Software and Cisco RoomOS Software could allow an authenticated, remote attacker to read arbitrary files from the underlying operating system. This vulnerability is due to insufficient path validation of command arguments. An attacker could exploit this vulnerability by sending a crafted command request to the xAPI. A successful exploit could allow the attacker to read the contents of any file that is located on the device filesystem.
CVE-2021-1529 A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation by the system CLI. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the system CLI. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.
CVE-2021-1524 A vulnerability in the API of Cisco Meeting Server could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because requests that are sent to the API are not properly validated. An attacker could exploit this vulnerability by sending a malicious request to the API. A successful exploit could allow the attacker to cause all participants on a call to be disconnected, resulting in a DoS condition.
CVE-2021-1522 A vulnerability in the change password API of Cisco Connected Mobile Experiences (CMX) could allow an authenticated, remote attacker to alter their own password to a value that does not comply with the strong authentication requirements that are configured on an affected device. This vulnerability exists because a password policy check is incomplete at the time a password is changed at server side using the API. An attacker could exploit this vulnerability by sending a specially crafted API request to the affected device. A successful exploit could allow the attacker to change their own password to a value that does not comply with the configured strong authentication requirements.
CVE-2021-1520 A vulnerability in the internal message processing of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, local attacker to run arbitrary commands with root privileges on the underlying operating system (OS). This vulnerability exists because an internal messaging service does not properly sanitize input. An attacker could exploit this vulnerability by first authenticating to the device and then sending a crafted request to the internal service. A successful exploit could allow the attacker to run arbitrary commands with root privileges on the underlying OS. To exploit this vulnerability, the attacker must have valid Administrator credentials for the device.
CVE-2021-1519 A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client Software could allow an authenticated, local attacker to overwrite VPN profiles on an affected device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to modify VPN profile files. To exploit this vulnerability, the attacker must have valid credentials on the affected system.
CVE-2021-1518 A vulnerability in the REST API of Cisco Firepower Device Manager (FDM) On-Box Software could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system of an affected device. This vulnerability is due to insufficient sanitization of user input on specific REST API commands. An attacker could exploit this vulnerability by sending a crafted HTTP request to the API subsystem of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system. To exploit this vulnerability, an attacker would need valid low-privileged user credentials.
CVE-2021-1516 A vulnerability in the web-based management interface of Cisco AsyncOS Software for Cisco Content Security Management Appliance (SMA), Cisco Email Security Appliance (ESA), and Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to access sensitive information on an affected device. The vulnerability exists because confidential information is included in HTTP requests that are exchanged between the user and the device. An attacker could exploit this vulnerability by looking at the raw HTTP requests that are sent to the interface. A successful exploit could allow the attacker to obtain some of the passwords that are configured throughout the interface.
CVE-2021-1514 A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with Administrator privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as a low-privileged user to execute the affected commands. A successful exploit could allow the attacker to execute commands with Administrator privileges.
CVE-2021-1499 A vulnerability in the web-based management interface of Cisco HyperFlex HX Data Platform could allow an unauthenticated, remote attacker to upload files to an affected device. This vulnerability is due to missing authentication for the upload function. An attacker could exploit this vulnerability by sending a specific HTTP request to an affected device. A successful exploit could allow the attacker to upload files to the affected device with the permissions of the tomcat8 user.
CVE-2021-1496 Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. A successful exploit could allow the attacker to execute arbitrary code on an affected device with SYSTEM privileges. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1493 A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a buffer overflow on an affected system. The vulnerability is due to insufficient boundary checks for specific data that is provided to the web services interface of an affected system. An attacker could exploit this vulnerability by sending a malicious HTTP request. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected system, which could disclose data fragments or cause the device to reload, resulting in a denial of service (DoS) condition.
CVE-2021-1489 A vulnerability in filesystem usage management for Cisco Firepower Device Manager (FDM) Software could allow an authenticated, remote attacker to exhaust filesystem resources, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to the insufficient management of available filesystem resources. An attacker could exploit this vulnerability by uploading files to the device and exhausting available filesystem resources. A successful exploit could allow the attacker to cause database errors and cause the device to become unresponsive to web-based management. Manual intervention is required to free filesystem resources and return the device to an operational state.
CVE-2021-1488 A vulnerability in the upgrade process of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to inject commands that could be executed with root privileges on the underlying operating system (OS). This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by uploading a crafted upgrade package file to an affected device. A successful exploit could allow the attacker to inject commands that could be executed with root privileges on the underlying OS.
CVE-2021-1487 A vulnerability in the web-based management interface of Cisco Prime Infrastructure and Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system (OS) with the permissions of a special non-root user. In this way, an attacker could take control of the affected system, which would allow them to obtain and alter sensitive data. The attacker could also affect the devices that are managed by the affected system by pushing arbitrary configuration files, retrieving device credentials and confidential information, and ultimately undermining the stability of the devices, causing a denial of service (DoS) condition.
CVE-2021-1485 A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges on the underlying Linux operating system (OS) of an affected device. This vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to an affected command. A successful exploit could allow the attacker to execute commands on the underlying Linux OS with root privileges.
CVE-2021-1477 A vulnerability in an access control mechanism of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to access services beyond the scope of their authorization. This vulnerability is due to insufficient enforcement of access control in the affected software. An attacker could exploit this vulnerability by directly accessing the internal services of an affected device. A successful exploit could allow the attacker to overwrite policies and impact the configuration and operation of the affected device.
CVE-2021-1476 A vulnerability in the CLI of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input for specific commands. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges. To exploit this vulnerability, an attacker must have valid administrator-level credentials.
CVE-2021-1475 Multiple vulnerabilities in the Admin audit log export feature and Scheduled Reports feature of Cisco Umbrella could allow an authenticated, remote attacker to perform formula and link injection attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1474 Multiple vulnerabilities in the Admin audit log export feature and Scheduled Reports feature of Cisco Umbrella could allow an authenticated, remote attacker to perform formula and link injection attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1473 Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1472 Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1454 Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.
CVE-2021-1450 A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. To exploit this vulnerability, the attacker would need to have valid credentials on the device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending one or more crafted IPC messages to the AnyConnect process on an affected device. A successful exploit could allow the attacker to stop the AnyConnect process, causing a DoS condition on the device. Note: The process under attack will automatically restart so no action is needed by the user or admin.
CVE-2021-1449 A vulnerability in the boot logic of Cisco Access Points Software could allow an authenticated, local attacker to execute unsigned code at boot time. The vulnerability is due to an improper check that is performed by the area of code that manages system startup processes. An attacker could exploit this vulnerability by modifying a specific file that is stored on the system, which would allow the attacker to bypass existing protections. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. Note: To exploit this vulnerability, the attacker would need to have access to the development shell (devshell) on the device.
CVE-2021-1448 A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.
CVE-2021-1443 A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary code with root privileges on the underlying operating system of an affected device. The vulnerability exists because the affected software improperly sanitizes values that are parsed from a specific configuration file. An attacker could exploit this vulnerability by tampering with a specific configuration file and then sending an API call. A successful exploit could allow the attacker to inject arbitrary code that would be executed on the underlying operating system of the affected device. To exploit this vulnerability, the attacker would need to have a privileged set of credentials to the device.
CVE-2021-1442 A vulnerability in a diagnostic command for the Plug-and-Play (PnP) subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to the level of an Administrator user (level 15) on an affected device. The vulnerability is due to insufficient protection of sensitive information. An attacker with low privileges could exploit this vulnerability by issuing the diagnostic CLI show pnp profile when a specific PnP listener is enabled on the device. A successful exploit could allow the attacker to obtain a privileged authentication token. This token can be used to send crafted PnP messages and execute privileged commands on the targeted system.
CVE-2021-1441 A vulnerability in the hardware initialization routines of Cisco IOS XE Software for Cisco 1100 Series Industrial Integrated Services Routers and Cisco ESR6300 Embedded Series Routers could allow an authenticated, local attacker to execute unsigned code at system boot time. This vulnerability is due to incorrect validations of parameters passed to a diagnostic script that is executed when the device boots up. An attacker could exploit this vulnerability by tampering with an executable file stored on a device. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need administrative level credentials (level 15) on the device.
CVE-2021-1438 A vulnerability in Cisco Wide Area Application Services (WAAS) Software could allow an authenticated, local attacker to gain access to sensitive information on an affected device. The vulnerability is due to improper input validation and authorization of specific commands that a user can execute within the CLI. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a specific set of commands. A successful exploit could allow the attacker to read arbitrary files that they originally did not have permissions to access.
CVE-2021-1435 A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that can be executed as the root user. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to the web UI of an affected device with arbitrary commands injected into a portion of the request. A successful exploit could allow the attacker to execute arbitrary commands as the root user.
CVE-2021-1432 A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as the root user. The attacker must be authenticated on the affected device as a low-privileged user to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting arbitrary commands to a file as a lower-privileged user. The commands are then executed on the device by the root user. A successful exploit could allow the attacker to execute arbitrary commands as the root user.
CVE-2021-1430 Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. A successful exploit could allow the attacker to execute arbitrary code on an affected device with SYSTEM privileges. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1429 Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. A successful exploit could allow the attacker to execute arbitrary code on an affected device with SYSTEM privileges. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1428 Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. A successful exploit could allow the attacker to execute arbitrary code on an affected device with SYSTEM privileges. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1427 Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. A successful exploit could allow the attacker to execute arbitrary code on an affected device with SYSTEM privileges. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1426 Multiple vulnerabilities in the install, uninstall, and upgrade processes of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to hijack DLL or executable files that are used by the application. A successful exploit could allow the attacker to execute arbitrary code on an affected device with SYSTEM privileges. To exploit these vulnerabilities, the attacker must have valid credentials on the Windows system. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1423 A vulnerability in the implementation of a CLI command in Cisco Aironet Access Points (AP) could allow an authenticated, local attacker to overwrite files in the flash memory of the device. This vulnerability is due to insufficient input validation for a specific command. An attacker could exploit this vulnerability by issuing a command with crafted arguments. A successful exploit could allow the attacker to overwrite or create files with data that is already present in other files that are hosted on the affected device.
CVE-2021-1422 A vulnerability in the software cryptography module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker or an unauthenticated attacker in a man-in-the-middle position to cause an unexpected reload of the device that results in a denial of service (DoS) condition. The vulnerability is due to a logic error in how the software cryptography module handles specific types of decryption errors. An attacker could exploit this vulnerability by sending malicious packets over an established IPsec connection. A successful exploit could cause the device to crash, forcing it to reload. Important: Successful exploitation of this vulnerability would not cause a compromise of any encrypted data. Note: This vulnerability affects only Cisco ASA Software Release 9.16.1 and Cisco FTD Software Release 7.0.0.
CVE-2021-1421 A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to perform a command injection attack on an affected device. The vulnerability is due to insufficient validation of user-supplied input to a configuration command. An attacker could exploit this vulnerability by including malicious input during the execution of this command. A successful exploit could allow a non-privileged attacker authenticated in the restricted CLI to execute arbitrary commands on the underlying operating system (OS) with root privileges.
CVE-2021-1419 A vulnerability in the SSH management feature of multiple Cisco Access Points (APs) platforms could allow a local, authenticated user to modify files on the affected device and possibly gain escalated privileges. The vulnerability is due to improper checking on file operations within the SSH management interface. A network administrator user could exploit this vulnerability by accessing an affected device through SSH management to make a configuration change. A successful exploit could allow the attacker to gain privileges equivalent to the root user.
CVE-2021-1415 Multiple vulnerabilities in the web-based management interface of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code with elevated privileges equivalent to the web service process on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.
CVE-2021-1414 Multiple vulnerabilities in the web-based management interface of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code with elevated privileges equivalent to the web service process on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.
CVE-2021-1413 Multiple vulnerabilities in the web-based management interface of Cisco RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code with elevated privileges equivalent to the web service process on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.
CVE-2021-1406 A vulnerability in Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to improper inclusion of sensitive information in downloadable files. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a specific set of commands. A successful exploit could allow the attacker to obtain hashed credentials of system users. To exploit this vulnerability an attacker would need to have valid user credentials with elevated privileges.
CVE-2021-1403 A vulnerability in the web UI feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site WebSocket hijacking (CSWSH) attack and cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient HTTP protections in the web UI on an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the web UI to follow a crafted link. A successful exploit could allow the attacker to corrupt memory on the affected device, forcing it to reload and causing a DoS condition.
CVE-2021-1401 Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1400 Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1398 A vulnerability in the boot logic of Cisco IOS XE Software could allow an authenticated, local attacker with level 15 privileges or an unauthenticated attacker with physical access to execute arbitrary code on the underlying Linux operating system of an affected device. This vulnerability is due to incorrect validations of specific function arguments that are passed to the boot script. An attacker could exploit this vulnerability by tampering with a specific file, which an affected device would process during the initial boot process. On systems that are protected by the Unified Extensible Firmware Interface (UEFI) secure boot feature, a successful exploit could allow the attacker to execute unsigned code at boot time and bypass the image verification check in the secure boot process of the affected device.
CVE-2021-1392 A vulnerability in the CLI command permissions of Cisco IOS and Cisco IOS XE Software could allow an authenticated, local attacker to retrieve the password for Common Industrial Protocol (CIP) and then remotely configure the device as an administrative user. This vulnerability exists because incorrect permissions are associated with the show cip security CLI command. An attacker could exploit this vulnerability by issuing the command to retrieve the password for CIP on an affected device. A successful exploit could allow the attacker to reconfigure the device.
CVE-2021-1391 A vulnerability in the dragonite debugger of Cisco IOS XE Software could allow an authenticated, local attacker to escalate from privilege level 15 to root privilege. The vulnerability is due to the presence of development testing and verification scripts that remained on the device. An attacker could exploit this vulnerability by bypassing the consent token mechanism with the residual scripts on the affected device. A successful exploit could allow the attacker to escalate from privilege level 15 to root privilege.
CVE-2021-1390 A vulnerability in one of the diagnostic test CLI commands of Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary code on an affected device. To exploit this vulnerability, the attacker would need to have valid user credentials at privilege level 15. This vulnerability exists because the affected software permits modification of the run-time memory of an affected device under specific circumstances. An attacker could exploit this vulnerability by authenticating to the affected device and issuing a specific diagnostic test command at the CLI. A successful exploit could trigger a logic error in the code that was designed to restrict run-time memory modifications. The attacker could take advantage of this logic error to overwrite system memory locations and execute arbitrary code on the underlying Linux operating system (OS) of the affected device.
CVE-2021-1388 A vulnerability in an API endpoint of Cisco ACI Multi-Site Orchestrator (MSO) installed on the Application Services Engine could allow an unauthenticated, remote attacker to bypass authentication on an affected device. The vulnerability is due to improper token validation on a specific API endpoint. An attacker could exploit this vulnerability by sending a crafted request to the affected API. A successful exploit could allow the attacker to receive a token with administrator-level privileges that could be used to authenticate to the API on affected MSO and managed Cisco Application Policy Infrastructure Controller (APIC) devices.
CVE-2021-1385 A vulnerability in the Cisco IOx application hosting environment of multiple Cisco platforms could allow an authenticated, remote attacker to conduct directory traversal attacks and read and write files on the underlying operating system or host system. This vulnerability occurs because the device does not properly validate URIs in IOx API requests. An attacker could exploit this vulnerability by sending a crafted API request that contains directory traversal character sequences to an affected device. A successful exploit could allow the attacker to read or write arbitrary files on the underlying operating system.
CVE-2021-1384 A vulnerability in Cisco IOx application hosting environment of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands into the underlying operating system as the root user. This vulnerability is due to incomplete validation of fields in the application packages loaded onto IOx. An attacker could exploit this vulnerability by creating a crafted application .tar file and loading it onto the device. A successful exploit could allow the attacker to perform command injection into the underlying operating system as the root user.
CVE-2021-1383 Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.
CVE-2021-1382 A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root privileges.
CVE-2021-1381 A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker with high privileges or an unauthenticated attacker with physical access to the device to open a debugging console. The vulnerability is due to insufficient command authorization restrictions. An attacker could exploit this vulnerability by running commands on the hardware platform to open a debugging console. A successful exploit could allow the attacker to access a debugging console.
CVE-2021-1376 Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1375 Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1374 A vulnerability in the web-based management interface of Cisco IOS XE Wireless Controller software for the Catalyst 9000 Family of switches could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against another user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by authenticating to the device as a high-privileged user, adding certain configurations with malicious code in one of its fields, and persuading another user to click on it. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or to access sensitive, browser-based information.
CVE-2021-1371 A vulnerability in the role-based access control of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker with read-only privileges to obtain administrative privileges by using the console port when the device is in the default SD-WAN configuration. This vulnerability occurs because the default configuration is applied for console authentication and authorization. An attacker could exploit this vulnerability by connecting to the console port and authenticating as a read-only user. A successful exploit could allow a user with read-only permissions to access administrative privileges.
CVE-2021-1370 A vulnerability in a CLI command of Cisco IOS XR Software for the Cisco 8000 Series Routers and Network Convergence System 540 Series Routers running NCS540L software images could allow an authenticated, local attacker to elevate their privilege to root. To exploit this vulnerability, an attacker would need to have a valid account on an affected device. The vulnerability is due to insufficient validation of command line arguments. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the prompt. A successful exploit could allow an attacker with low-level privileges to escalate their privilege level to root.
CVE-2021-1369 A vulnerability in the REST API of Cisco Firepower Device Manager (FDM) On-Box Software could allow an authenticated, remote attacker to gain read and write access to information that is stored on an affected device. This vulnerability is due to the improper handling of XML External Entity (XXE) entries when parsing certain XML files. An attacker could exploit this vulnerability by sending malicious requests that contain references in XML entities to an affected system. A successful exploit could allow the attacker to retrieve files from the local system, resulting in the disclosure of sensitive information or causing a partial denial of service (DoS) condition on the affected device.
CVE-2021-1366 A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack on an affected device if the VPN Posture (HostScan) Module is installed on the AnyConnect client. This vulnerability is due to insufficient validation of resources that are loaded by the application at run time. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected machine with SYSTEM privileges. To exploit this vulnerability, the attacker needs valid credentials on the Windows system.
CVE-2021-1362 A vulnerability in the SOAP API endpoint of Cisco Unified Communications Manager, Cisco Unified Communications Manager Session Management Edition, Cisco Unified Communications Manager IM &amp; Presence Service, Cisco Unity Connection, and Cisco Prime License Manager could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper sanitization of user-supplied input. An attacker could exploit this vulnerability by sending a SOAP API request with crafted parameters to an affected device. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the underlying Linux operating system of the affected device.
CVE-2021-1360 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1359 A vulnerability in the configuration management of Cisco AsyncOS for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. This vulnerability is due to insufficient validation of user-supplied XML input for the web interface. An attacker could exploit this vulnerability by uploading crafted XML configuration files that contain scripting code to a vulnerable device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system and elevate privileges to root. An attacker would need a valid user account with the rights to upload configuration files to exploit this vulnerability.
CVE-2021-1356 Multiple vulnerabilities in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to cause the web UI software to become unresponsive and consume vty line instances, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient error handling in the web UI. An attacker could exploit these vulnerabilities by sending crafted HTTP packets to an affected device. A successful exploit could allow the attacker to cause the web UI software to become unresponsive and consume all available vty lines, preventing new session establishment and resulting in a DoS condition. Manual intervention would be required to regain web UI and vty session functionality. Note: These vulnerabilities do not affect the console connection.
CVE-2021-1348 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1347 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1346 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1345 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1344 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1343 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1342 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1341 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1340 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1339 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1338 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1337 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1336 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1335 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1334 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1333 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1332 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1331 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1330 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1329 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1328 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1327 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1326 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1325 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1324 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1323 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1322 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1321 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1320 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1319 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1318 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.
CVE-2021-1317 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.
CVE-2021-1316 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.
CVE-2021-1315 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.
CVE-2021-1314 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.
CVE-2021-1307 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1306 A vulnerability in the restricted shell of Cisco Evolved Programmable Network (EPN) Manager, Cisco Identity Services Engine (ISE), and Cisco Prime Infrastructure could allow an authenticated, local attacker to identify directories and write arbitrary files to the file system. This vulnerability is due to improper validation of parameters that are sent to a CLI command within the restricted shell. An attacker could exploit this vulnerability by logging in to the device and issuing certain CLI commands. A successful exploit could allow the attacker to identify file directories on the affected device and write arbitrary files to the file system on the affected device. To exploit this vulnerability, the attacker must be an authenticated shell user.
CVE-2021-1303 A vulnerability in the user management roles of Cisco DNA Center could allow an authenticated, remote attacker to execute unauthorized commands on an affected device. The vulnerability is due to improper enforcement of actions for assigned user roles. An attacker could exploit this vulnerability by authenticating as a user with an Observer role and executing commands on the affected device. A successful exploit could allow a user with the Observer role to execute commands to view diagnostic information of the devices that Cisco DNA Center manages.
CVE-2021-1299 Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1298 Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1287 A vulnerability in the web-based management interface of Cisco RV132W ADSL2+ Wireless-N VPN Routers and Cisco RV134W VDSL2 Wireless-AC VPN Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition on the affected device.
CVE-2021-1284 A vulnerability in the web-based messaging service interface of Cisco SD-WAN vManage Software could allow an unauthenticated, adjacent attacker to bypass authentication and authorization and modify the configuration of an affected system. To exploit this vulnerability, the attacker must be able to access an associated Cisco SD-WAN vEdge device. This vulnerability is due to insufficient authorization checks. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based messaging service interface of an affected system. A successful exploit could allow the attacker to gain unauthenticated read and write access to the affected vManage system. With this access, the attacker could access information about the affected vManage system, modify the configuration of the system, or make configuration changes to devices that are managed by the system.
CVE-2021-1283 A vulnerability in the logging subsystem of Cisco Data Center Network Manager (DCNM) could allow an authenticated, local attacker to view sensitive information in a system log file that should be restricted. The vulnerability exists because sensitive information is not properly masked before it is written to system log files. An attacker could exploit this vulnerability by authenticating to an affected device and inspecting a specific system log file. A successful exploit could allow the attacker to view sensitive information in the system log file. To exploit this vulnerability, the attacker would need to have valid user credentials.
CVE-2021-1281 A vulnerability in CLI management in Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system as the root user. This vulnerability is due to the way the software handles concurrent CLI sessions. An attacker could exploit this vulnerability by authenticating to the device as an administrative user and executing a sequence of commands. A successful exploit could allow the attacker to obtain access to the underlying operating system as the root user.
CVE-2021-1272 A vulnerability in the session validation feature of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass access controls and conduct a server-side request forgery (SSRF) attack on a targeted system. This vulnerability is due to insufficient validation of parameters in a specific HTTP request by an attacker. An attacker could exploit this vulnerability by sending a crafted HTTP request to an authenticated user of the DCNM web application. A successful exploit could allow the attacker to bypass access controls and gain unauthorized access to the Device Manager application, which provides access to network devices managed by the system.
CVE-2021-1271 A vulnerability in the web-based management interface of Cisco AsyncOS for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by inserting malicious data into a specific data field in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface.
CVE-2021-1267 A vulnerability in the dashboard widget of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper restrictions on XML entities. An attacker could exploit this vulnerability by crafting an XML-based widget on an affected server. A successful exploit could cause increased memory and CPU utilization, which could result in a DoS condition.
CVE-2021-1266 A vulnerability in the REST API of Cisco Managed Services Accelerator (MSX) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the way that the affected software logs certain API requests. An attacker could exploit this vulnerability by sending a flood of crafted API requests to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.
CVE-2021-1265 A vulnerability in the configuration archive functionality of Cisco DNA Center could allow any privilege-level authenticated, remote attacker to obtain the full unmasked running configuration of managed devices. The vulnerability is due to the configuration archives files being stored in clear text, which can be retrieved by various API calls. An attacker could exploit this vulnerability by authenticating to the device and executing a series of API calls. A successful exploit could allow the attacker to retrieve the full unmasked running configurations of managed devices.
CVE-2021-1263 Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1262 Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1261 Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1260 Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1258 A vulnerability in the upgrade component of Cisco AnyConnect Secure Mobility Client could allow an authenticated, local attacker with low privileges to read arbitrary files on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient file permission restrictions. An attacker could exploit this vulnerability by sending a crafted command from the local CLI to the application. A successful exploit could allow the attacker to read arbitrary files on the underlying OS of the affected device. The attacker would need to have valid user credentials to exploit this vulnerability.
CVE-2021-1257 A vulnerability in the web-based management interface of Cisco DNA Center Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack to manipulate an authenticated user into executing malicious actions without their awareness or consent. The vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a web-based management user to follow a specially crafted link. A successful exploit could allow the attacker to perform arbitrary actions on the device with the privileges of the authenticated user. These actions include modifying the device configuration, disconnecting the user's session, and executing Command Runner commands.
CVE-2021-1256 A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to overwrite files on the file system of an affected device by using directory traversal techniques. A successful exploit could cause system instability if important system files are overwritten. This vulnerability is due to insufficient validation of user input for the file path in a specific CLI command. An attacker could exploit this vulnerability by logging in to a targeted device and issuing a specific CLI command with crafted user input. A successful exploit could allow the attacker to overwrite arbitrary files on the file system of the affected device. The attacker would need valid user credentials on the device.
CVE-2021-1248 Multiple vulnerabilities in certain REST API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to execute arbitrary SQL commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1247 Multiple vulnerabilities in certain REST API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to execute arbitrary SQL commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1244 Multiple vulnerabilities in Cisco Network Convergence System (NCS) 540 Series Routers, only when running Cisco IOS XR NCS540L software images, and Cisco IOS XR Software for the Cisco 8000 Series Routers could allow an authenticated, local attacker to execute unsigned code during the boot process on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1233 A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to access sensitive information on an affected device. The vulnerability is due to insufficient input validation of requests that are sent to the iperf tool. An attacker could exploit this vulnerability by sending a crafted request to the iperf tool, which is included in Cisco SD-WAN Software. A successful exploit could allow the attacker to obtain any file from the filesystem of an affected device.
CVE-2021-1220 Multiple vulnerabilities in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to cause the web UI software to become unresponsive and consume vty line instances, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient error handling in the web UI. An attacker could exploit these vulnerabilities by sending crafted HTTP packets to an affected device. A successful exploit could allow the attacker to cause the web UI software to become unresponsive and consume all available vty lines, preventing new session establishment and resulting in a DoS condition. Manual intervention would be required to regain web UI and vty session functionality. Note: These vulnerabilities do not affect the console connection.
CVE-2021-1219 A vulnerability in Cisco Smart Software Manager Satellite could allow an authenticated, local attacker to access sensitive information on an affected system. The vulnerability is due to insufficient protection of static credentials in the affected software. An attacker could exploit this vulnerability by gaining access to the static credential that is stored on the local device. A successful exploit could allow the attacker to view static credentials, which the attacker could use to carry out further attacks.
CVE-2021-1218 A vulnerability in the web management interface of Cisco Smart Software Manager satellite could allow an authenticated, remote attacker to redirect a user to an undesired web page. The vulnerability is due to improper input validation of the URL parameters in an HTTP request that is sent to an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request that could cause the web application to redirect the request to a specified malicious URL. A successful exploit could allow the attacker to redirect a user to a malicious website.
CVE-2021-1217 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1216 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1215 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1214 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1213 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1212 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1211 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1210 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1209 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1208 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1207 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1206 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1205 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1204 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1203 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1202 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1201 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1200 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1199 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1198 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1197 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1196 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1195 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1194 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1193 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1192 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1191 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1190 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1189 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1188 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1187 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1186 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1185 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1184 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1183 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1182 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1181 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1180 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1179 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1178 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1177 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1176 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1175 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1174 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1173 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1172 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1171 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1170 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1169 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1168 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1167 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1166 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1165 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1164 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1163 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1162 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1161 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1160 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1159 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1158 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface. The vulnerabilities are due to insufficient input validation by the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1157 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface. The vulnerabilities are due to insufficient input validation by the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1156 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface. The vulnerabilities are due to insufficient input validation by the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1155 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface. The vulnerabilities are due to insufficient input validation by the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1154 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface. The vulnerabilities are due to insufficient input validation by the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1153 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface. The vulnerabilities are due to insufficient input validation by the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1152 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface. The vulnerabilities are due to insufficient input validation by the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1151 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface. The vulnerabilities are due to insufficient input validation by the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.
CVE-2021-1150 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1149 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1148 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1147 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1146 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.
CVE-2021-1145 A vulnerability in the Secure FTP (SFTP) of Cisco StarOS for Cisco ASR 5000 Series Routers could allow an authenticated, remote attacker to read arbitrary files on an affected device. To exploit this vulnerability, the attacker would need to have valid credentials on the affected device. The vulnerability is due to insecure handling of symbolic links. An attacker could exploit this vulnerability by sending a crafted SFTP command to an affected device. A successful exploit could allow the attacker to read arbitrary files on the affected device.
CVE-2021-1144 A vulnerability in Cisco Connected Mobile Experiences (CMX) could allow a remote, authenticated attacker without administrative privileges to alter the password of any user on an affected system. The vulnerability is due to incorrect handling of authorization checks for changing a password. An authenticated attacker without administrative privileges could exploit this vulnerability by sending a modified HTTP request to an affected device. A successful exploit could allow the attacker to alter the passwords of any user on the system, including an administrative user, and then impersonate that user.
CVE-2021-1143 A vulnerability in Cisco Connected Mobile Experiences (CMX) API authorizations could allow an authenticated, remote attacker to enumerate what users exist on the system. The vulnerability is due to a lack of authorization checks for certain API GET requests. An attacker could exploit this vulnerability by sending specific API GET requests to an affected device. A successful exploit could allow the attacker to enumerate users of the CMX system.
CVE-2021-1136 Multiple vulnerabilities in Cisco Network Convergence System (NCS) 540 Series Routers, only when running Cisco IOS XR NCS540L software images, and Cisco IOS XR Software for the Cisco 8000 Series Routers could allow an authenticated, local attacker to execute unsigned code during the boot process on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2021-1130 A vulnerability in the web-based management interface of Cisco DNA Center software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface of an affected device. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information. To exploit this vulnerability, an attacker would need to have administrative credentials on the affected device.
CVE-2021-1129 A vulnerability in the authentication for the general purpose APIs implementation of Cisco Email Security Appliance (ESA), Cisco Content Security Management Appliance (SMA), and Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to access general system information and certain configuration information from an affected device. The vulnerability exists because a secure authentication token is not required when authenticating to the general purpose API. An attacker could exploit this vulnerability by sending a crafted request for information to the general purpose API on an affected device. A successful exploit could allow the attacker to obtain system and configuration information from the affected device, resulting in an unauthorized information disclosure.
CVE-2021-1127 A vulnerability in the web-based management interface of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface. The vulnerability is due to improper input validation of log file content stored on the affected device. An attacker could exploit this vulnerability by modifying a log file with malicious code and getting a user to view the modified log file. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or to access sensitive, browser-based information.
CVE-2021-0278 An Improper Input Validation vulnerability in J-Web of Juniper Networks Junos OS allows a locally authenticated attacker to escalate their privileges to root over the target device. junos:18.3R3-S5 junos:18.4R3-S9 junos:19.1R3-S6 junos:19.3R2-S6 junos:19.3R3-S3 junos:19.4R1-S4 junos:19.4R3-S4 junos:20.1R2-S2 junos:20.1R3 junos:20.2R3-S1 junos:20.3X75-D20 junos:20.3X75-D30 junos:20.4R2-S1 junos:20.4R3 junos:21.1R1-S1 junos:21.1R2 junos:21.2R1 junos:21.3R1 This issue affects: Juniper Networks Junos OS 19.3 versions 19.3R1 and above prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2. This issue does not affect Juniper Networks Junos OS versions prior to 19.3R1.
CVE-2021-0269 The improper handling of client-side parameters in J-Web of Juniper Networks Junos OS allows an attacker to perform a number of different malicious actions against a target device when a user is authenticated to J-Web. An attacker may be able to supersede existing parameters, including hardcoded parameters within the HTTP/S session, access and exploit variables, bypass web application firewall rules or input validation mechanisms, and otherwise alter and modify J-Web's normal behavior. An attacker may be able to transition victims to malicious web services, or exfiltrate sensitive information from otherwise secure web forms. This issue affects: Juniper Networks Junos OS: All versions prior to 17.4R3-S3; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2.
CVE-2021-0268 An Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Response Splitting') weakness in J-web of Juniper Networks Junos OS leads to buffer overflows, segment faults, or other impacts, which allows an attacker to modify the integrity of the device and exfiltration information from the device without authentication. The weakness can be exploited to facilitate cross-site scripting (XSS), cookie manipulation (modifying session cookies, stealing cookies) and more. This weakness can also be exploited by directing a user to a seemingly legitimate link from the affected site. The attacker requires no special access or permissions to the device to carry out such attacks. This issue affects: Juniper Networks Junos OS: 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S3; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2, 19.4R3; 20.1 versions prior to 20.1R1-S2, 20.1R2. This issue does not affect Juniper Networks Junos OS versions prior to 18.1R1.
CVE-2021-0260 An improper authorization vulnerability in the Simple Network Management Protocol daemon (snmpd) service of Juniper Networks Junos OS leads an unauthenticated attacker being able to perform SNMP read actions, an Exposure of System Data to an Unauthorized Control Sphere, or write actions to OIDs that support write operations, against the device without authentication. This issue affects: Juniper Networks Junos OS: 17.2 version 17.2R1 and later versions; 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R2-S5, 18.4R3; 19.1 versions prior to 19.1R2; 19.2 versions prior to 19.2R1-S6, 19.2R2; 19.3 versions prior to 19.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 17.2R1.
CVE-2020-9477 An issue was discovered on HUMAX HGA12R-02 BRGCAA 1.1.53 devices. A vulnerability in the authentication functionality in the web-based interface could allow an unauthenticated remote attacker to capture packets at the time of authentication and gain access to the cleartext password. An attacker could use this access to create a new user account or control the device.
CVE-2020-9435 PHOENIX CONTACT TC ROUTER 3002T-4G through 2.05.3, TC ROUTER 2002T-3G through 2.05.3, TC ROUTER 3002T-4G VZW through 2.05.3, TC ROUTER 3002T-4G ATT through 2.05.3, TC CLOUD CLIENT 1002-4G through 2.03.17, and TC CLOUD CLIENT 1002-TXTX through 1.03.17 devices contain a hardcoded certificate (and key) that is used by default for web-based services on the device. Impersonation, man-in-the-middle, or passive decryption attacks are possible if the generic certificate is not replaced by a device-specific certificate during installation.
CVE-2020-9099 Huawei products IPS Module; NGFW Module; NIP6300; NIP6600; NIP6800; Secospace USG6300; Secospace USG6500; Secospace USG6600; USG9500 with versions of V500R001C00; V500R001C20; V500R001C30; V500R001C50; V500R001C60; V500R001C80; V500R005C00; V500R005C10; V500R005C20; V500R002C00; V500R002C10; V500R002C20; V500R002C30 have an improper authentication vulnerability. Attackers need to perform some operations to exploit the vulnerability. Successful exploit may obtain certain permissions on the device.
CVE-2020-9077 HUAWEI P30 smart phones with versions earlier than 10.1.0.160(C00E160R2P11) have an information exposure vulnerability. The system does not properly authenticate the application that access a specified interface. Attackers can trick users into installing malicious software to exploit this vulnerability and obtain some information about the device. Successful exploit may cause information disclosure.
CVE-2020-9071 There is a few bytes out-of-bounds read vulnerability in some Huawei products. The software reads data past the end of the intended buffer when parsing certain message, an authenticated attacker could exploit this vulnerability by sending crafted messages to the device. Successful exploit may cause service abnormal in specific scenario.Affected product versions include:AR120-S versions V200R007C00SPC900,V200R007C00SPCa00
CVE-2020-9068 Huawei AR3200 products with versions of V200R007C00SPC900, V200R007C00SPCa00, V200R007C00SPCb00, V200R007C00SPCc00, V200R009C00SPC500 have an improper authentication vulnerability. Attackers need to perform some operations to exploit the vulnerability. Successful exploit may obtain certain permissions on the device.
CVE-2020-9064 Huawei smartphone Honor V30 with versions earlier than OxfordS-AN00A 10.0.1.167(C00E166R4P1) have an improper authentication vulnerability. Authentication to target component is improper when device performs an operation. Attackers exploit this vulnerability to obtain some information by loading malicious application, leading to information leak.
CVE-2020-9054 Multiple ZyXEL network-attached storage (NAS) devices running firmware version 5.21 contain a pre-authentication command injection vulnerability, which may allow a remote, unauthenticated attacker to execute arbitrary code on a vulnerable device. ZyXEL NAS devices achieve authentication by using the weblogin.cgi CGI executable. This program fails to properly sanitize the username parameter that is passed to it. If the username parameter contains certain characters, it can allow command injection with the privileges of the web server that runs on the ZyXEL device. Although the web server does not run as the root user, ZyXEL devices include a setuid utility that can be leveraged to run any command with root privileges. As such, it should be assumed that exploitation of this vulnerability can lead to remote code execution with root privileges. By sending a specially-crafted HTTP POST or GET request to a vulnerable ZyXEL device, a remote, unauthenticated attacker may be able to execute arbitrary code on the device. This may happen by directly connecting to a device if it is directly exposed to an attacker. However, there are ways to trigger such crafted requests even if an attacker does not have direct connectivity to a vulnerable devices. For example, simply visiting a website can result in the compromise of any ZyXEL device that is reachable from the client system. Affected products include: NAS326 before firmware V5.21(AAZF.7)C0 NAS520 before firmware V5.21(AASZ.3)C0 NAS540 before firmware V5.21(AATB.4)C0 NAS542 before firmware V5.21(ABAG.4)C0 ZyXEL has made firmware updates available for NAS326, NAS520, NAS540, and NAS542 devices. Affected models that are end-of-support: NSA210, NSA220, NSA220+, NSA221, NSA310, NSA310S, NSA320, NSA320S, NSA325 and NSA325v2
CVE-2020-8168 We have recently released new version of AirMax AirOS firmware v6.3.0 for TI, XW and XM boards that fixes vulnerabilities found on AirMax AirOS v6.2.0 and prior TI, XW and XM boards, according to the description below:Attackers can abuse multiple end-points not protected against cross-site request forgery (CSRF), as a result authenticated users can be persuaded to visit malicious web pages, which allows attackers to perform arbitrary actions, such as downgrade the device's firmware to older versions, modify configuration, upload arbitrary firmware, exfiltrate files and tokens.Mitigation:Update to the latest AirMax AirOS firmware version available at the AirMax download page.
CVE-2020-8006 The server in Circontrol Raption through 5.11.2 has a pre-authentication stack-based buffer overflow that can be exploited to gain run-time control of the device as root. The ocpp1.5 and pwrstudio binaries on the charging station do not use a number of common exploitation mitigations. In particular, there are no stack canaries and they do not use the Position Independent Executable (PIE) format.
CVE-2020-7824 A vulnerability in the web-based management interface of iPECS could allow an authenticated, remote attacker to get administrator permission. The vulnerability is due to insecure permission when handling session cookies. An attacker could exploit this vulnerability by modification the cookie value to an affected device. A successful exploit could allow the attacker access to sensitive device information, which includes configuration files.
CVE-2020-7591 A vulnerability has been identified in SIPORT MP (All versions < 3.2.1). Vulnerable versions of the device could allow an authenticated attacker to impersonate other users of the system and perform (potentially administrative) actions on behalf of those users if the single sign-on feature ("Allow logon without password") is enabled.
CVE-2020-7240 ** DISPUTED ** Meinberg Lantime M300 and M1000 devices allow attackers (with privileges to configure a device) to execute arbitrary OS commands by editing the /config/netconf.cmd script (aka Extended Network Configuration). Note: According to the description, the vulnerability requires a fully authenticated super-user account using a webUI function that allows super users to edit a script supposed to execute OS commands. The given weakness enumeration (CWE-78) is not applicable in this case as it refers to abusing functions/input fields not supposed to be accepting OS commands by using 'Special Elements.'
CVE-2020-6877 A ZTE product is impacted by an information leak vulnerability. An attacker could use this vulnerability to obtain the authentication password of the handheld terminal and access the device illegally for operation. This affects: ZXA10 eODN V2.3P2T1
CVE-2020-6769 Missing Authentication for Critical Function in the Bosch Video Streaming Gateway (VSG) allows an unauthenticated remote attacker to retrieve and set arbitrary configuration data of the Video Streaming Gateway. A successful attack can impact the confidentiality and availability of live and recorded video data of all cameras configured to be controlled by the VSG as well as the recording storage associated with the VSG. This affects Bosch Video Streaming Gateway versions 6.45 <= 6.45.08, 6.44 <= 6.44.022, 6.43 <= 6.43.0023 and 6.42.10 and older. This affects Bosch DIVAR IP 3000, DIVAR IP 7000 and DIVAR IP all-in-one 5000 if a vulnerable VSG version is installed with BVMS. This affects Bosch DIVAR IP 2000 <= 3.62.0019 and DIVAR IP 5000 <= 3.80.0039 if the corresponding port 8023 has been opened in the device's firewall.
CVE-2020-5860 On BIG-IP 15.0.0-15.1.0.2, 14.1.0-14.1.2.3, 13.1.0-13.1.3.2, 12.1.0-12.1.5.1, and 11.5.2-11.6.5.1 and BIG-IQ 7.0.0, 6.0.0-6.1.0, and 5.2.0-5.4.0, in a High Availability (HA) network failover in Device Service Cluster (DSC), the failover service does not require a strong form of authentication and HA network failover traffic is not encrypted by Transport Layer Security (TLS).
CVE-2020-5736 Amcrest cameras and NVR are vulnerable to a null pointer dereference over port 37777. An authenticated remote attacker can abuse this issue to crash the device.
CVE-2020-5735 Amcrest cameras and NVR are vulnerable to a stack-based buffer overflow over port 37777. An authenticated remote attacker can abuse this issue to crash the device and possibly execute arbitrary code.
CVE-2020-5621 Cross-site request forgery (CSRF) vulnerability in NETGEAR switching hubs (GS716Tv2 Firmware version 5.4.2.30 and earlier, and GS724Tv3 Firmware version 5.4.2.30 and earlier) allow remote attackers to hijack the authentication of administrators and alter the settings of the device via unspecified vectors.
CVE-2020-5536 OpenBlocks IoT VX2 prior to Ver.4.0.0 (Ver.3 Series) allows an attacker on the same network segment to bypass authentication and to initialize the device via unspecified vectors.
CVE-2020-5532 ilbo App (ilbo App for Android prior to version 1.1.8 and ilbo App for iOS prior to version 1.2.01) allows an attacker on the same network segment to bypass authentication and to view the images which were recorded by the other ilbo user's device via unspecified vectors.
CVE-2020-5373 Dell EMC OpenManage Integration for Microsoft System Center (OMIMSSC) for SCCM and SCVMM versions prior to 7.2.1 contain an improper authentication vulnerability. A remote unauthenticated attacker may potentially exploit this vulnerability to retrieve the system inventory data of the managed device.
CVE-2020-3920 UltraLog Express device management interface does not properly perform access authentication in some specific pages/functions. Any user can access the privileged page to manage accounts through specific system directory.
CVE-2020-36283 HID OMNIKEY 5427 and OMNIKEY 5127 readers are vulnerable to CSRF when using the EEM driver (Ethernet Emulation Mode). By persuading an authenticated user to visit a malicious Web site, a remote attacker could send a malformed HTTP request to upload a configuration file to the device. An attacker could exploit this vulnerability to perform cross-site scripting attacks, Web cache poisoning, and other malicious activities.
CVE-2020-36128 Pax Technology PAXSTORE v7.0.8_20200511171508 and lower is affected by a token spoofing vulnerability. Each payment terminal has a session token (called X-Terminal-Token) to access the marketplace. This allows the store to identify the terminal and make available the applications distributed by its reseller. By intercepting HTTPS traffic from the application store, it is possible to collect the request responsible for assigning the X-Terminal-Token to the terminal, which makes it possible to craft an X-Terminal-Token pretending to be another device. An attacker can use this behavior to authenticate its own payment terminal in the application store through token impersonation.
CVE-2020-3602 A vulnerability in the CLI of Cisco StarOS operating system for Cisco ASR 5000 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. The vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user on the affected device. To exploit this vulnerability, an attacker would need to have valid credentials on an affected device and know the password for the cli test-commands command.
CVE-2020-3601 A vulnerability in the CLI of Cisco StarOS operating system for Cisco ASR 5000 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. The vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user. To exploit this vulnerability, an attacker would need to have valid administrative credentials on an affected device.
CVE-2020-35756 An issue was discovered on Libre Wireless LS9 LS1.5/p7040 devices. There is a luci_service GETPASS Configuration Password Information Leak. The luci_service daemon running on port 7777 does not require authentication to return the device configuration password in cleartext when using the GETPASS command. As such, any unauthenticated person with access to port 7777 on the device will be able to leak the user's personal device configuration password by issuing the GETPASS command.
CVE-2020-3567 A vulnerability in the management REST API of Cisco Industrial Network Director (IND) could allow an authenticated, remote attacker to cause the CPU utilization to increase to 100 percent, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of requests sent to the REST API. An attacker could exploit this vulnerability by sending a crafted request to the REST API. A successful exploit could allow the attacker to cause a permanent DoS condition that is due to high CPU utilization. Manual intervention may be required to recover the Cisco IND.
CVE-2020-3559 A vulnerability in Cisco Aironet Access Point (AP) Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper handling of clients that are trying to connect to the AP. An attacker could exploit this vulnerability by sending authentication requests from multiple clients to an affected device. A successful exploit could allow the attacker to cause the affected device to reload.
CVE-2020-3550 A vulnerability in the sfmgr daemon of Cisco Firepower Management Center (FMC) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to perform directory traversal and access directories outside the restricted path. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using a relative path in specific sfmgr commands. An exploit could allow the attacker to read or write arbitrary files on an sftunnel-connected peer device.
CVE-2020-3547 A vulnerability in the web-based management interface of Cisco AsyncOS software for Cisco Email Security Appliance (ESA), Cisco Content Security Management Appliance (SMA), and Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to access sensitive information on an affected device. The vulnerability exists because an insecure method is used to mask certain passwords on the web-based management interface. An attacker could exploit this vulnerability by looking at the raw HTML code that is received from the interface. A successful exploit could allow the attacker to obtain some of the passwords configured throughout the interface.
CVE-2020-3531 A vulnerability in the REST API of Cisco IoT Field Network Director (FND) could allow an unauthenticated, remote attacker to access the back-end database of an affected system. The vulnerability exists because the affected software does not properly authenticate REST API calls. An attacker could exploit this vulnerability by obtaining a cross-site request forgery (CSRF) token and then using the token with REST API requests. A successful exploit could allow the attacker to access the back-end database of the affected device and read, alter, or drop information.
CVE-2020-3530 A vulnerability in task group assignment for a specific CLI command in Cisco IOS XR Software could allow an authenticated, local attacker to execute that command, even though administrative privileges should be required. The attacker must have valid credentials on the affected device. The vulnerability is due to incorrect mapping in the source code of task group assignments for a specific command. An attacker could exploit this vulnerability by issuing the command, which they should not be authorized to issue, on an affected device. A successful exploit could allow the attacker to invalidate the integrity of the disk and cause the device to restart. This vulnerability could allow a user with read permissions to issue a specific command that should require Administrator privileges.
CVE-2020-35231 The NSDP protocol implementation on NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices was affected by an authentication issue that allows an attacker to bypass access controls and obtain full control of the device.
CVE-2020-35224 A buffer overflow vulnerability in the NSDP protocol authentication method on NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices allows remote unauthenticated attackers to force a device reboot.
CVE-2020-3522 A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) Software could allow an authenticated, remote attacker to bypass authorization on an affected device and access sensitive information that is related to the device. The vulnerability exists because the affected software allows users to access resources that are intended for administrators only. An attacker could exploit this vulnerability by submitting a crafted URL to an affected device. A successful exploit could allow the attacker to add, delete, and edit certain network configurations in the same manner as a user with administrative privileges.
CVE-2020-3521 A vulnerability in a specific REST API of Cisco Data Center Network Manager (DCNM) Software could allow an authenticated, remote attacker to conduct directory traversal attacks on an affected device. The vulnerability is due to insufficient validation of user-supplied input to the API. An attacker with a low-privileged account could exploit this vulnerability by sending a crafted request to the API. A successful exploit could allow the attacker to read arbitrary files on the affected system.
CVE-2020-3520 A vulnerability in Cisco Data Center Network Manager (DCNM) Software could allow an authenticated, local attacker to obtain confidential information from an affected device. The vulnerability is due to insufficient protection of confidential information on an affected device. An attacker at any privilege level could exploit this vulnerability by accessing local filesystems and extracting sensitive information from them. A successful exploit could allow the attacker to view sensitive data, which they could use to elevate their privilege.
CVE-2020-3519 A vulnerability in a specific REST API method of Cisco Data Center Network Manager (DCNM) Software could allow an authenticated, remote attacker to conduct a path traversal attack on an affected device. The vulnerability is due to insufficient validation of user-supplied input to the API. An attacker could exploit this vulnerability by sending a crafted request to the API. A successful exploit could allow the attacker to overwrite arbitrary files on the affected device.
CVE-2020-3516 A vulnerability in the web server authentication of Cisco IOS XE Software could allow an authenticated, remote attacker to crash the web server on the device. The vulnerability is due to insufficient input validation during authentication. An attacker could exploit this vulnerability by entering unexpected characters during a valid authentication. A successful exploit could allow the attacker to crash the web server on the device, which must be manually recovered by disabling and re-enabling the web server.
CVE-2020-3514 A vulnerability in the multi-instance feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to escape the container for their Cisco FTD instance and execute commands with root privileges in the host namespace. The attacker must have valid credentials on the device.The vulnerability exists because a configuration file that is used at container startup has insufficient protections. An attacker could exploit this vulnerability by modifying a specific container configuration file on the underlying file system. A successful exploit could allow the attacker to execute commands with root privileges within the host namespace. This could allow the attacker to impact other running Cisco FTD instances or the host Cisco FXOS device.
CVE-2020-3513 Multiple vulnerabilities in the initialization routines that are executed during bootup of Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers with a Route Switch Processor 3 (RSP3) installed could allow an authenticated, local attacker with high privileges to execute persistent code at bootup and break the chain of trust. These vulnerabilities are due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit these vulnerabilities by copying a specific file to the local file system of an affected device and defining specific ROMMON variables. A successful exploit could allow the attacker to run arbitrary code on the underlying operating system (OS) with root privileges. To exploit these vulnerabilities, an attacker would need to have access to the root shell on the device or have physical access to the device.
CVE-2020-3504 A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of CLI command parameters. An attacker could exploit this vulnerability by executing specific commands on the local-mgmt CLI on an affected device. A successful exploit could allow the attacker to cause internal system processes to fail to terminate properly, which could result in a buildup of stuck processes and lead to slowness in accessing the UCS Manager CLI and web UI. A sustained attack may result in a restart of internal UCS Manager processes and a temporary loss of access to the UCS Manager CLI and web UI.
CVE-2020-3503 A vulnerability in the file system permissions of Cisco IOS XE Software could allow an authenticated, local attacker to obtain read and write access to critical configuration or system files. The vulnerability is due to insufficient file system permissions on an affected device. An attacker could exploit this vulnerability by connecting to an affected device's guest shell, and accessing or modifying restricted files. A successful exploit could allow the attacker to view or modify restricted information or configurations that are normally not accessible to system administrators.
CVE-2020-3491 A vulnerability in the web-based management interface of Cisco Vision Dynamic Signage Director could allow an authenticated, remote attacker with administrative privileges to conduct a cross-site scripting (XSS) attack against a user of the interface on an affected device. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by inserting malicious data into a specific data field in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker would need to have administrative privileges on the affected device.
CVE-2020-3485 A vulnerability in the role-based access control (RBAC) functionality of the web management software of Cisco Vision Dynamic Signage Director could allow an authenticated, remote attacker to access resources that they should not be able to access and perform actions that they should not be able to perform. The vulnerability exists because the web management software does not properly handle RBAC. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to view and delete certain screen content on the system that the attacker would not normally have privileges to access.
CVE-2020-3478 A vulnerability in the REST API of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to overwrite certain files that should be restricted on an affected device. The vulnerability is due to insufficient authorization enforcement on an affected system. An attacker could exploit this vulnerability by uploading a file using the REST API. A successful exploit could allow an attacker to overwrite and upload files, which could degrade the functionality of the affected system.
CVE-2020-3473 A vulnerability in task group assignment for a specific CLI command in Cisco IOS XR Software could allow an authenticated, local CLI shell user to elevate privileges and gain full administrative control of the device. The vulnerability is due to incorrect mapping of a command to task groups within the source code. An attacker could exploit this vulnerability by first authenticating to the local CLI shell on the device and using the CLI command to bypass the task group&ndash;based checks. A successful exploit could allow the attacker to elevate privileges and perform actions on the device without authorization checks.
CVE-2020-3467 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to modify parts of the configuration on an affected device. The vulnerability is due to improper enforcement of role-based access control (RBAC) within the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to modify parts of the configuration. The modified configuration could either allow unauthorized devices onto the network or prevent authorized devices from accessing the network. To exploit this vulnerability, an attacker would need valid Read-Only Administrator credentials.
CVE-2020-3464 A vulnerability in the web-based management interface of Cisco UCS Director could allow an authenticated, remote attacker with administrative credentials to conduct a cross-site scripting (XSS) attack against a user of the interface. The vulnerability exists because the web-based management interface does not properly validate input. An attacker could exploit this vulnerability by inserting malicious data into a specific data field in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, an attacker would need administrative credentials on the affected device.
CVE-2020-3461 A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to obtain confidential information from an affected device. The vulnerability is due to missing authentication on a specific part of the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the interface. A successful exploit could allow the attacker to read confidential information from an affected device.
CVE-2020-3459 A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.
CVE-2020-3458 Multiple vulnerabilities in the secure boot process of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software for the Firepower 1000 Series and Firepower 2100 Series Appliances could allow an authenticated, local attacker to bypass the secure boot mechanism. The vulnerabilities are due to insufficient protections of the secure boot process. An attacker could exploit these vulnerabilities by injecting code into specific files that are then referenced during the device boot process. A successful exploit could allow the attacker to break the chain of trust and inject code into the boot process of the device, which would be executed at each boot and maintain persistence across reboots.
CVE-2020-3457 A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.
CVE-2020-3455 A vulnerability in the secure boot process of Cisco FXOS Software could allow an authenticated, local attacker to bypass the secure boot mechanisms. The vulnerability is due to insufficient protections of the secure boot process. An attacker could exploit this vulnerability by injecting code into a specific file that is then referenced during the device boot process. A successful exploit could allow the attacker to break the chain of trust and inject code into the boot process of the device which would be executed at each boot and maintain persistence across reboots.
CVE-2020-3454 A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS.
CVE-2020-3448 A vulnerability in an access control mechanism of Cisco Cyber Vision Center Software could allow an unauthenticated, remote attacker to bypass authentication and access internal services that are running on an affected device. The vulnerability is due to insufficient enforcement of access control in the software. An attacker could exploit this vulnerability by directly accessing the internal services of an affected device. A successful exploit could allow an attacker to impact monitoring of sensors that are managed by the software.
CVE-2020-3447 A vulnerability in the CLI of Cisco AsyncOS for Cisco Email Security Appliance (ESA) and Cisco AsyncOS for Cisco Content Security Management Appliance (SMA) could allow an authenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to excessive verbosity in certain log subscriptions. An attacker could exploit this vulnerability by accessing specific log files on an affected device. A successful exploit could allow the attacker to obtain sensitive log data, which may include user credentials. To exploit this vulnerability, the attacker would need to have valid credentials at the operator level or higher on the affected device.
CVE-2020-3443 A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to elevate privileges and execute commands with higher privileges. The vulnerability is due to insufficient authorization of the System Operator role capabilities. An attacker could exploit this vulnerability by logging in with the System Operator role, performing a series of actions, and then assuming a new higher privileged role. A successful exploit could allow the attacker to perform all actions associated with the privilege of the assumed role. If that role is an administrative role, the attacker would gain full access to the device.
CVE-2020-3437 A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to read arbitrary files on the underlying filesystem of the device. The vulnerability is due to insufficient file scope limiting. An attacker could exploit this vulnerability by creating a specific file reference on the filesystem and then accessing it through the web-based management interface. A successful exploit could allow the attacker to read arbitrary files from the filesystem of the underlying operating system.
CVE-2020-3435 A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to overwrite VPN profiles on an affected device. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process on an affected device. A successful exploit could allow the attacker to modify VPN profile files. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system.
CVE-2020-3434 A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process on an affected device. A successful exploit could allow the attacker to stop the AnyConnect process, causing a DoS condition on the device. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system.
CVE-2020-3429 A vulnerability in the WPA2 and WPA3 security implementation of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect packet processing during the WPA2 and WPA3 authentication handshake when configured for dot1x or pre-shared key (PSK) authentication key management (AKM) with 802.11r BSS Fast Transition (FT) enabled. An attacker could exploit this vulnerability by sending a crafted authentication packet to an affected device. A successful exploit could cause an affected device to reload, resulting in a DoS condition.
CVE-2020-3425 Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to elevate privileges to the level of an Administrator user on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2020-3423 A vulnerability in the implementation of the Lua interpreter that is integrated in Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary code with root privileges on the underlying Linux operating system (OS) of an affected device. The vulnerability is due to insufficient restrictions on Lua function calls within the context of user-supplied Lua scripts. An attacker with valid administrative credentials could exploit this vulnerability by submitting a malicious Lua script. When this file is processed, an exploitable buffer overflow condition could occur. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the underlying Linux OS of the affected device.
CVE-2020-3417 A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to execute persistent code at boot time and break the chain of trust. This vulnerability is due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit this vulnerability by installing code to a specific directory in the underlying operating system (OS) and setting a specific ROMMON variable. A successful exploit could allow the attacker to execute persistent code on the underlying OS. To exploit this vulnerability, the attacker would need access to the root shell on the device or have physical access to the device.
CVE-2020-3416 Multiple vulnerabilities in the initialization routines that are executed during bootup of Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers with a Route Switch Processor 3 (RSP3) installed could allow an authenticated, local attacker with high privileges to execute persistent code at bootup and break the chain of trust. These vulnerabilities are due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit these vulnerabilities by copying a specific file to the local file system of an affected device and defining specific ROMMON variables. A successful exploit could allow the attacker to run arbitrary code on the underlying operating system (OS) with root privileges. To exploit these vulnerabilities, an attacker would need to have access to the root shell on the device or have physical access to the device.
CVE-2020-3411 A vulnerability in Cisco DNA Center software could allow an unauthenticated remote attacker access to sensitive information on an affected system. The vulnerability is due to improper handling of authentication tokens by the affected software. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker access to sensitive device information, which includes configuration files.
CVE-2020-3404 A vulnerability in the persistent Telnet/Secure Shell (SSH) CLI of Cisco IOS XE Software could allow an authenticated, local attacker to gain shell access on an affected device and execute commands on the underlying operating system (OS) with root privileges. The vulnerability is due to insufficient enforcement of the consent token in authorizing shell access. An attacker could exploit this vulnerability by authenticating to the persistent Telnet/SSH CLI on an affected device and requesting shell access. A successful exploit could allow the attacker to gain shell access on the affected device and execute commands on the underlying OS with root privileges.
CVE-2020-3403 A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to inject a command to the underlying operating system that will execute with root privileges upon the next reboot of the device. The authenticated user must have privileged EXEC permissions on the device. The vulnerability is due to insufficient protection of values passed to a script that executes during device startup. An attacker could exploit this vulnerability by writing values to a specific file. A successful exploit could allow the attacker to execute commands with root privileges each time the affected device is restarted.
CVE-2020-3402 A vulnerability in the Java Remote Method Invocation (RMI) interface of Cisco Unified Customer Voice Portal (CVP) could allow an unauthenticated, remote attacker to access sensitive information on an affected device. The vulnerability exists because certain RMI listeners are not properly authenticated. An attacker could exploit this vulnerability by sending a crafted request to the affected listener. A successful exploit could allow the attacker to access sensitive information on an affected device.
CVE-2020-3396 A vulnerability in the file system on the pluggable USB 3.0 Solid State Drive (SSD) for Cisco IOS XE Software could allow an authenticated, physical attacker to remove the USB 3.0 SSD and modify sensitive areas of the file system, including the namespace container protections. The vulnerability occurs because the USB 3.0 SSD control data is not stored on the internal boot flash. An attacker could exploit this vulnerability by removing the USB 3.0 SSD, modifying or deleting files on the USB 3.0 SSD by using another device, and then reinserting the USB 3.0 SSD on the original device. A successful exploit could allow the attacker to remove container protections and perform file actions outside the namespace of the container with root privileges.
CVE-2020-3394 A vulnerability in the Enable Secret feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to issue the enable command and get full administrative privileges. To exploit this vulnerability, the attacker would need to have valid credentials for the affected device. The vulnerability is due to a logic error in the implementation of the enable command. An attacker could exploit this vulnerability by logging in to the device and issuing the enable command. A successful exploit could allow the attacker to gain full administrative privileges without using the enable password. Note: The Enable Secret feature is disabled by default.
CVE-2020-3393 A vulnerability in the application-hosting subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to root on an affected device. The attacker could execute IOS XE commands outside the application-hosting subsystem Docker container as well as on the underlying Linux operating system. These commands could be run as the root user. The vulnerability is due to a combination of two factors: (a) incomplete input validation of the user payload of CLI commands, and (b) improper role-based access control (RBAC) when commands are issued at the command line within the application-hosting subsystem. An attacker could exploit this vulnerability by using a CLI command with crafted user input. A successful exploit could allow the lower-privileged attacker to execute arbitrary CLI commands with root privileges. The attacker would need valid user credentials to exploit this vulnerability.
CVE-2020-3391 A vulnerability in Cisco Digital Network Architecture (DNA) Center could allow an authenticated, remote attacker to view sensitive information in clear text. The vulnerability is due to insecure storage of certain unencrypted credentials on an affected device. An attacker could exploit this vulnerability by viewing the network device configuration and obtaining credentials that they may not normally have access to. A successful exploit could allow the attacker to use those credentials to discover and manage network devices.
CVE-2020-3390 A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of the Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation of the information used to generate an SNMP trap in relation to a wireless client connection. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, causing a DoS condition.
CVE-2020-3389 A vulnerability in the installation component of Cisco Hyperflex HX-Series Software could allow an authenticated, local attacker to retrieve the password that was configured at installation on an affected device. The vulnerability exists because sensitive information is stored as clear text. An attacker could exploit this vulnerability by authenticating to an affected device and navigating to the directory that contains sensitive information. A successful exploit could allow the attacker to obtain sensitive information in clear text from the affected device.
CVE-2020-3388 A vulnerability in the CLI of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated to access the CLI. A successful exploit could allow the attacker to execute commands with root privileges.
CVE-2020-3386 A vulnerability in the REST API endpoint of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with a low-privileged account to bypass authorization on the API of an affected device. The vulnerability is due to insufficient authorization of certain API functions. An attacker could exploit this vulnerability by sending a crafted request to the API using low-privileged credentials. A successful exploit could allow the attacker to perform arbitrary actions through the REST API with administrative privileges.
CVE-2020-3383 A vulnerability in the archive utility of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to conduct directory traversal attacks on an affected device. The vulnerability is due to a lack of proper input validation of paths that are embedded within archive files. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to write arbitrary files in the system with the privileges of the logged-in user.
CVE-2020-3382 A vulnerability in the REST API of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability exists because different installations share a static encryption key. An attacker could exploit this vulnerability by using the static key to craft a valid session token. A successful exploit could allow the attacker to perform arbitrary actions through the REST API with administrative privileges.
CVE-2020-3381 A vulnerability in the web management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct directory traversal attacks and obtain read and write access to sensitive files on a targeted system. The vulnerability is due to a lack of proper validation of files that are uploaded to an affected device. An attacker could exploit this vulnerability by uploading a crafted file to an affected system. An exploit could allow the attacker to view or modify arbitrary files on the targeted system.
CVE-2020-3377 A vulnerability in the Device Manager application of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to inject arbitrary commands on the affected device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted arguments to a specific field within the application. A successful exploit could allow the attacker to run commands as the administrator on the DCNM.
CVE-2020-3376 A vulnerability in the Device Manager application of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions on an affected device. The vulnerability is due to a failure in the software to perform proper authentication. An attacker could exploit this vulnerability by browsing to one of the hosted URLs in Cisco DCNM. A successful exploit could allow the attacker to interact with and use certain functions within the Cisco DCNM.
CVE-2020-3367 A vulnerability in the log subscription subsystem of Cisco AsyncOS for the Cisco Secure Web Appliance (formerly Web Security Appliance) could allow an authenticated, local attacker to perform command injection and elevate privileges to root. This vulnerability is due to insufficient validation of user-supplied input for the web interface and CLI. An attacker could exploit this vulnerability by authenticating to the affected device and injecting scripting commands in the scope of the log subscription subsystem. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system and elevate privileges to root.
CVE-2020-3365 A vulnerability in the directory permissions of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to perform a directory traversal attack on a limited set of restricted directories. The vulnerability is due to a flaw in the logic that governs directory permissions. An attacker could exploit this vulnerability by using capabilities that are not controlled by the role-based access control (RBAC) mechanisms of the software. A successful exploit could allow the attacker to overwrite files on an affected device.
CVE-2020-3362 A vulnerability in the CLI of Cisco Network Services Orchestrator (NSO) could allow an authenticated, local attacker to access confidential information on an affected device. The vulnerability is due to a timing issue in the processing of CLI commands. An attacker could exploit this vulnerability by executing a specific sequence of commands on the CLI. A successful exploit could allow the attacker to read configuration information that would normally be accessible to administrators only.
CVE-2020-3355 A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with administrative credentials to conduct a cross-site scripting (XSS) attack against a user of the interface. The vulnerability is due to insufficient input validation by the web-based management interface. An attacker could exploit this vulnerability by inserting malicious data into a specific data field in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker would need administrative credentials on the affected device.
CVE-2020-3354 A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with administrative credentials to conduct a cross-site scripting (XSS) attack against a user of the interface. The vulnerability is due to insufficient input validation by the web-based management interface. An attacker could exploit this vulnerability by inserting malicious data into a specific data field in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker would need administrative credentials on the affected device.
CVE-2020-3352 A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access hidden commands. The vulnerability is due to the presence of undocumented configuration commands. An attacker could exploit this vulnerability by performing specific steps that make the hidden commands accessible. A successful exploit could allow the attacker to make configuration changes to various sections of an affected device that should not be exposed to CLI access.
CVE-2020-3349 Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface on an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by persuading a user of the interface to click a customized link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive browser-based information.
CVE-2020-3348 Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface on an affected device. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by persuading a user of the interface to click a customized link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive browser-based information.
CVE-2020-3344 A vulnerability in Cisco AMP for Endpoints Linux Connector Software and Cisco AMP for Endpoints Mac Connector Software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted packet to an affected device. A successful exploit could allow the attacker to cause the Cisco AMP for Endpoints service to crash and restart.
CVE-2020-3343 A vulnerability in Cisco AMP for Endpoints Linux Connector Software and Cisco AMP for Endpoints Mac Connector Software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted packet to an affected device. A successful exploit could allow the attacker to cause the Cisco AMP for Endpoints service to crash and restart.
CVE-2020-3336 A vulnerability in the software upgrade process of Cisco TelePresence Collaboration Endpoint Software and Cisco RoomOS Software could allow an authenticated, remote attacker to modify the filesystem to cause a denial of service (DoS) or gain privileged access to the root filesystem. The vulnerability is due to insufficient input validation. An attacker with administrative privileges could exploit this vulnerability by sending requests with malformed parameters to the system using the console, Secure Shell (SSH), or web API. A successful exploit could allow the attacker to modify the device configuration or cause a DoS.
CVE-2020-3335 A vulnerability in the key store of Cisco Application Services Engine Software could allow an authenticated, local attacker to read sensitive information of other users on an affected device. The vulnerability is due to insufficient authorization limitations. An attacker could exploit this vulnerability by logging in to an affected device locally with valid credentials. A successful exploit could allow the attacker to read the sensitive information of other users on the affected device.
CVE-2020-3333 A vulnerability in the API of Cisco Application Services Engine Software could allow an unauthenticated, remote attacker to update event policies on an affected device. The vulnerability is due to insufficient authentication of users who modify policies on an affected device. An attacker could exploit this vulnerability by crafting a malicious HTTP request to contact an affected device. A successful exploit could allow the attacker to update event policies on the affected device.
CVE-2020-3332 A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Series Routers could allow an authenticated, remote attacker to inject arbitrary shell commands that are executed by an affected device. The vulnerability is due to insufficient input validation of user-supplied data. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary shell commands or scripts with root privileges on the affected device.
CVE-2020-3320 A vulnerability in the web-based management interface of Cisco Firepower Management Center could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by first entering input within the web-based management interface and then persuading a user of the interface to view the crafted input within the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
CVE-2020-3310 A vulnerability in the XML parser code of Cisco Firepower Device Manager On-Box software could allow an authenticated, remote attacker to cause an affected system to become unstable or reload. The vulnerability is due to insufficient hardening of the XML parser configuration. An attacker could exploit this vulnerability in multiple ways using a malicious file: An attacker with administrative privileges could upload a malicious XML file on the system and cause the XML code to parse the malicious file. An attacker with Clientless Secure Sockets Layer (SSL) VPN access could exploit this vulnerability by sending a crafted XML file. A successful exploit would allow the attacker to crash the XML parser process, which could cause system instability, memory exhaustion, and in some cases lead to a reload of the affected system.
CVE-2020-3309 A vulnerability in Cisco Firepower Device Manager (FDM) On-Box software could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation. An attacker could exploit this vulnerability by uploading a malicious file to an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on as well as modify the underlying operating system of an affected device.
CVE-2020-3308 A vulnerability in the Image Signature Verification feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker with administrator-level credentials to install a malicious software patch on an affected device. The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by crafting an unsigned software patch to bypass signature checks and loading it on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.
CVE-2020-3302 A vulnerability in the web UI of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to overwrite files on the file system of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by uploading a crafted file to the web UI on an affected device. A successful exploit could allow the attacker to overwrite files on the file system of the affected device.
CVE-2020-3297 A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.
CVE-2020-3296 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.
CVE-2020-3295 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.
CVE-2020-3294 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.
CVE-2020-3293 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.
CVE-2020-3292 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.
CVE-2020-3291 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.
CVE-2020-3290 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.
CVE-2020-3289 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.
CVE-2020-3288 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.
CVE-2020-3287 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.
CVE-2020-3286 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.
CVE-2020-3279 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
CVE-2020-3278 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
CVE-2020-3277 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
CVE-2020-3276 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
CVE-2020-3275 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
CVE-2020-3274 Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
CVE-2020-3266 A vulnerability in the CLI of Cisco SD-WAN Solution software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.
CVE-2020-3264 A vulnerability in Cisco SD-WAN Solution software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to information that they are not authorized to access and make changes to the system that they are not authorized to make.
CVE-2020-3253 A vulnerability in the support tunnel feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access the shell of an affected device even though expert mode is disabled. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by enabling the support tunnel, setting a key, and deriving the tunnel password. A successful exploit could allow the attacker to run any system command with root access on an affected device.
CVE-2020-3252 Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2020-3251 Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2020-3250 Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2020-3249 Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2020-3248 Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2020-3247 Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2020-3243 Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2020-3242 A vulnerability in the REST API of Cisco UCS Director could allow an authenticated, remote attacker with administrative privileges to obtain confidential information from an affected device. The vulnerability exists because confidential information is returned as part of an API response. An attacker could exploit this vulnerability by sending a crafted request to the API. A successful exploit could allow the attacker to obtain the API key of another user, which would allow the attacker to impersonate the account of that user on the affected device. To exploit this vulnerability, the attacker must have administrative privileges on the device.
CVE-2020-3241 A vulnerability in the orchestration tasks of Cisco UCS Director could allow an authenticated, remote attacker to perform a path traversal attack on an affected device. The vulnerability is due to insufficient validation of user-supplied input on the web-based management interface. An attacker could exploit this vulnerability by creating a task with specific configuration parameters. A successful exploit could allow the attacker to overwrite arbitrary files in the file system of an affected device.
CVE-2020-3240 Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2020-3239 Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2020-3238 A vulnerability in the Cisco Application Framework component of the Cisco IOx application environment could allow an authenticated, remote attacker to write or modify arbitrary files in the virtual instance that is running on the affected device. The vulnerability is due to insufficient input validation of user-supplied application packages. An attacker who can upload a malicious package within Cisco IOx could exploit the vulnerability to modify arbitrary files. The impacts of a successful exploit are limited to the scope of the virtual instance and do not affect the device that is hosting Cisco IOx.
CVE-2020-3237 A vulnerability in the Cisco Application Framework component of the Cisco IOx application environment could allow an authenticated, local attacker to overwrite arbitrary files in the virtual instance that is running on the affected device. The vulnerability is due to insufficient path restriction enforcement. An attacker could exploit this vulnerability by including a crafted file in an application package. An exploit could allow the attacker to overwrite files.
CVE-2020-3236 A vulnerability in the CLI of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to gain root shell access to the underlying operating system and overwrite or read arbitrary files. The attacker would need valid administrative credentials. This vulnerability is due to improper input validation of CLI command arguments. An attacker could exploit this vulnerability by using path traversal techniques when executing a vulnerable command. A successful exploit could allow the attacker to gain root shell access to the underlying operating system and overwrite or read arbitrary files on an affected device.
CVE-2020-3235 A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software on Catalyst 4500 Series Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient input validation when the software processes specific SNMP object identifiers. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: To exploit this vulnerability by using SNMPv2c or earlier, the attacker must know the SNMP read-only community string for an affected system. To exploit this vulnerability by using SNMPv3, the attacker must know the user credentials for the affected system.
CVE-2020-3234 A vulnerability in the virtual console authentication of Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an authenticated but low-privileged, local attacker to log in to the Virtual Device Server (VDS) of an affected device by using a set of default credentials. The vulnerability is due to the presence of weak, hard-coded credentials. An attacker could exploit this vulnerability by authenticating to the targeted device and then connecting to VDS through the device&rsquo;s virtual console by using the static credentials. A successful exploit could allow the attacker to access the Linux shell of VDS as the root user.
CVE-2020-3233 A vulnerability in the web-based Local Manager interface of the Cisco IOx Application Framework could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based Local Manager interface of an affected device. The attacker must have valid Local Manager credentials. The vulnerability is due to insufficient validation of user-supplied input by the web-based Local Manager interface of the affected software. An attacker could exploit this vulnerability by injecting malicious code into a system settings tab. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected web interface or allow the attacker to access sensitive browser-based information.
CVE-2020-3232 A vulnerability in the Simple Network Management Protocol (SNMP) implementation in Cisco ASR 920 Series Aggregation Services Router model ASR920-12SZ-IM could allow an authenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect handling of data that is returned for Cisco Discovery Protocol queries to SNMP. An attacker could exploit this vulnerability by sending a request for Cisco Discovery Protocol information by using SNMP. An exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.
CVE-2020-3229 A vulnerability in Role Based Access Control (RBAC) functionality of Cisco IOS XE Web Management Software could allow a Read-Only authenticated, remote attacker to execute commands or configuration changes as an Admin user. The vulnerability is due to incorrect handling of RBAC for the administration GUI. An attacker could exploit this vulnerability by sending a modified HTTP request to the affected device. An exploit could allow the attacker as a Read-Only user to execute CLI commands or configuration changes as if they were an Admin user.
CVE-2020-3224 A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to inject IOS commands to an affected device. The injected commands should require a higher privilege level in order to be executed. The vulnerability is due to insufficient input validation of specific HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a specific web UI endpoint on an affected device. A successful exploit could allow the attacker to inject IOS commands to the affected device, which could allow the attacker to alter the configuration of the device or cause a denial of service (DoS) condition.
CVE-2020-3223 A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with administrative privileges to read arbitrary files on the underlying filesystem of the device. The vulnerability is due to insufficient file scope limiting. An attacker could exploit this vulnerability by creating a specific file reference on the filesystem and then accessing it through the web UI. An exploit could allow the attacker to read arbitrary files from the underlying operating system's filesystem.
CVE-2020-3219 A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with administrative privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input to the web UI. A successful exploit could allow an attacker to execute arbitrary commands with administrative privileges on an affected device.
CVE-2020-3218 A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code with root privileges on the underlying Linux shell. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by first creating a malicious file on the affected device itself and then uploading a second malicious file to the device. A successful exploit could allow the attacker to execute arbitrary code with root privileges or bypass licensing requirements on the device.
CVE-2020-3216 A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, physical attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by stopping the boot initialization of an affected device. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.
CVE-2020-3215 A vulnerability in the Virtual Services Container of Cisco IOS XE Software could allow an authenticated, local attacker to gain root-level privileges on an affected device. The vulnerability is due to insufficient validation of a user-supplied open virtual appliance (OVA). An attacker could exploit this vulnerability by installing a malicious OVA on an affected device.
CVE-2020-3214 A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to escalate their privileges to a user with root-level privileges. The vulnerability is due to insufficient validation of user-supplied content. This vulnerability could allow an attacker to load malicious software onto an affected device.
CVE-2020-3213 A vulnerability in the ROMMON of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to those of the root user of the underlying operating system. The vulnerability is due to the ROMMON allowing for special parameters to be passed to the device at initial boot up. An attacker could exploit this vulnerability by sending parameters to the device at initial boot up. An exploit could allow the attacker to elevate from a Priv15 user to the root user and execute arbitrary commands with the privileges of the root user.
CVE-2020-3212 A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device. The vulnerability is due to improper input sanitization. An attacker could exploit this vulnerability by uploading a crafted file to the web UI of an affected device. A successful exploit could allow the attacker to inject and execute arbitrary commands with root privileges on the device.
CVE-2020-3211 A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device. The vulnerability is due to improper input sanitization. An attacker who has valid administrative access to an affected device could exploit this vulnerability by supplying a crafted input parameter on a form in the web UI and then submitting that form. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device, which could lead to complete system compromise.
CVE-2020-3210 A vulnerability in the CLI parsers of Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an authenticated, local attacker to execute arbitrary shell commands on the Virtual Device Server (VDS) of an affected device. The attacker must have valid user credentials at privilege level 15. The vulnerability is due to insufficient validation of arguments that are passed to specific VDS-related CLI commands. An attacker could exploit this vulnerability by authenticating to the targeted device and including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands in the context of the Linux shell of VDS with the privileges of the root user.
CVE-2020-3208 A vulnerability in the image verification feature of Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) could allow an authenticated, local attacker to boot a malicious software image on an affected device. The vulnerability is due to insufficient access restrictions on the area of code that manages the image verification feature. An attacker could exploit this vulnerability by first authenticating to the targeted device and then logging in to the Virtual Device Server (VDS) of an affected device. The attacker could then, from the VDS shell, disable Cisco IOS Software integrity (image) verification. A successful exploit could allow the attacker to boot a malicious Cisco IOS Software image on the targeted device. To exploit this vulnerability, the attacker must have valid user credentials at privilege level 15.
CVE-2020-3207 A vulnerability in the processing of boot options of specific Cisco IOS XE Software switches could allow an authenticated, local attacker with root shell access to the underlying operating system (OS) to conduct a command injection attack during device boot. This vulnerability is due to insufficient input validation checks while processing boot options. An attacker could exploit this vulnerability by modifying device boot options to execute attacker-provided code. A successful exploit may allow an attacker to bypass the Secure Boot process and execute malicious code on an affected device with root-level privileges.
CVE-2020-3206 A vulnerability in the handling of IEEE 802.11w Protected Management Frames (PMFs) of Cisco Catalyst 9800 Series Wireless Controllers that are running Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to terminate a valid user connection to an affected device. The vulnerability exists because the affected software does not properly validate 802.11w disassociation and deauthentication PMFs that it receives. An attacker could exploit this vulnerability by sending a spoofed 802.11w PMF from a valid, authenticated client on a network adjacent to an affected device. A successful exploit could allow the attacker to terminate a single valid user connection to the affected device.
CVE-2020-3204 A vulnerability in the Tool Command Language (Tcl) interpreter of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, local attacker with privileged EXEC credentials to execute arbitrary code on the underlying operating system (OS) with root privileges. The vulnerability is due to insufficient input validation of data passed to the Tcl interpreter. An attacker could exploit this vulnerability by loading malicious Tcl code on an affected device. A successful exploit could allow the attacker to cause memory corruption or execute the code with root privileges on the underlying OS of the affected device.
CVE-2020-3201 A vulnerability in the Tool Command Language (Tcl) interpreter of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, local attacker with privileged EXEC credentials to cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient input validation of data passed to the Tcl interpreter. An attacker could exploit this vulnerability by executing crafted Tcl arguments on an affected device. An exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
CVE-2020-3200 A vulnerability in the Secure Shell (SSH) server code of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. The vulnerability is due to an internal state not being represented correctly in the SSH state machine, which leads to an unexpected behavior. An attacker could exploit this vulnerability by creating an SSH connection to an affected device and using a specific traffic pattern that causes an error condition within that connection. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition.
CVE-2020-3176 A vulnerability in Cisco Remote PHY Device Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exists because the affected software does not properly sanitize user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying certain CLI commands with crafted arguments. A successful exploit could allow the attacker to run arbitrary commands as the root user, which could result in a complete system compromise.
CVE-2020-3173 A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by including crafted arguments to specific commands on the local management CLI. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.
CVE-2020-3171 A vulnerability in the local management (local-mgmt) CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.
CVE-2020-3169 A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root on an affected device. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2020-3165 A vulnerability in the implementation of Border Gateway Protocol (BGP) Message Digest 5 (MD5) authentication in Cisco NX-OS Software could allow an unauthenticated, remote attacker to bypass MD5 authentication and establish a BGP connection with the device. The vulnerability occurs because the BGP MD5 authentication is bypassed if the peer does not have MD5 authentication configured, the NX-OS device does have BGP MD5 authentication configured, and the NX-OS BGP virtual routing and forwarding (VRF) name is configured to be greater than 19 characters. An attacker could exploit this vulnerability by attempting to establish a BGP session with the NX-OS peer. A successful exploit could allow the attacker to establish a BGP session with the NX-OS device without MD5 authentication. The Cisco implementation of the BGP protocol accepts incoming BGP traffic only from explicitly configured peers. To exploit this vulnerability, an attacker must send the malicious packets over a TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the affected system&rsquo;s trusted network.
CVE-2020-3154 A vulnerability in the web UI of Cisco Cloud Web Security (CWS) could allow an authenticated, remote attacker to execute arbitrary SQL queries. The vulnerability exists because the web-based management interface improperly validates SQL values. An authenticated attacker could exploit this vulnerability sending malicious requests to the affected device. An exploit could allow the attacker to modify values on or return values from the underlying database.
CVE-2020-3149 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) Software could allow an authenticated, remote attacker to perform a stored cross-site scripting (XSS) attack on an affected device. The vulnerability is due to insufficient input validation by the web-based management interface. An attacker could exploit this vulnerability by providing malicious data to a specific field within the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. Cisco ISE Software releases 2.7.0 and later contains the fix for this vulnerability.
CVE-2020-3146 Multiple vulnerabilities in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary code on an affected device. The vulnerabilities are due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit these vulnerabilities by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user.
CVE-2020-3145 Multiple vulnerabilities in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary code on an affected device. The vulnerabilities are due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit these vulnerabilities by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user.
CVE-2020-3144 A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary commands with administrative commands on an affected device. The vulnerability is due to improper session management on affected devices. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.
CVE-2020-3143 A vulnerability in the video endpoint API (xAPI) of Cisco TelePresence Collaboration Endpoint (CE) Software, Cisco TelePresence Codec (TC) Software, and Cisco RoomOS Software could allow an authenticated, remote attacker to conduct directory traversal attacks on an affected device. The vulnerability is due to insufficient validation of user-supplied input to the xAPI of the affected software. An attacker could exploit this vulnerability by sending a crafted request to the xAPI. A successful exploit could allow the attacker to read and write arbitrary files in the system. To exploit this vulnerability, an attacker would need either an In-Room Control or administrator account.
CVE-2020-3141 Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to elevate privileges to the level of an Administrator user on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2020-3138 A vulnerability in the upgrade component of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to install a malicious file when upgrading. The vulnerability is due to insufficient signature validation. An attacker could exploit this vulnerability by providing a crafted upgrade file. A successful exploit could allow the attacker to upload crafted code to the affected device.
CVE-2020-3125 A vulnerability in the Kerberos authentication feature of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to impersonate the Kerberos key distribution center (KDC) and bypass authentication on an affected device that is configured to perform Kerberos authentication for VPN or local device access. The vulnerability is due to insufficient identity verification of the KDC when a successful authentication response is received. An attacker could exploit this vulnerability by spoofing the KDC server response to the ASA device. This malicious response would not have been authenticated by the KDC. A successful attack could allow an attacker to bypass Kerberos authentication.
CVE-2020-29563 An issue was discovered on Western Digital My Cloud OS 5 devices before 5.07.118. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to gain access to the device.
CVE-2020-29497 Dell Wyse Management Suite versions prior to 3.1 contain a stored cross-site scripting vulnerability. A remote authenticated malicious user with low privileges could exploit this vulnerability to store malicious HTML or JavaScript code under the device tag. When victim users access the submitted data through their browsers, the malicious code gets executed by the web browser in the context of the vulnerable application.
CVE-2020-28971 An issue was discovered on Western Digital My Cloud OS 5 devices before 5.06.115. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to execute privileged commands on the device via a cookie, because of insufficient validation of URI paths.
CVE-2020-28970 An issue was discovered on Western Digital My Cloud OS 5 devices before 5.06.115. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to execute privileged commands on the device via a cookie. (In addition, an upload endpoint could then be used by an authenticated administrator to upload executable PHP scripts.)
CVE-2020-28940 On Western Digital My Cloud OS 5 devices before 5.06.115, the NAS Admin dashboard has an authentication bypass vulnerability that could allow an unauthenticated user to execute privileged commands on the device.
CVE-2020-28333 Barco wePresent WiPG-1600W devices allow Authentication Bypass. Affected Version(s): 2.5.1.8. The Barco wePresent WiPG-1600W web interface does not use session cookies for tracking authenticated sessions. Instead, the web interface uses a "SEID" token that is appended to the end of URLs in GET requests. Thus the "SEID" would be exposed in web proxy logs and browser history. An attacker that is able to capture the "SEID" and originate requests from the same IP address (via a NAT device or web proxy) would be able to access the user interface of the device without having to know the credentials.
CVE-2020-28330 Barco wePresent WiPG-1600W devices have Unprotected Transport of Credentials. Affected Version(s): 2.5.1.8. An attacker armed with hardcoded API credentials (retrieved by exploiting CVE-2020-28329) can issue an authenticated query to display the admin password for the main web user interface listening on port 443/tcp of a Barco wePresent WiPG-1600W device.
CVE-2020-27902 An authentication issue was addressed with improved state management. This issue is fixed in iOS 14.2 and iPadOS 14.2. A person with physical access to an iOS device may be able to access stored passwords without authentication.
CVE-2020-27865 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1860 firmware version 1.04B03 WiFi extenders. Authentication is not required to exploit this vulnerability. The specific flaw exists within the uhttpd service, which listens on TCP port 80 by default. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the device. Was ZDI-CAN-10894.
CVE-2020-27864 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1860 firmware version 1.04B03 WiFi extenders. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HNAP service, which listens on TCP port 80 by default. When parsing the Authorization request header, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-10880.
CVE-2020-27488 Loxone Miniserver devices with firmware before 11.1 (aka 11.1.9.3) are unable to use an authentication method that is based on the "signature of the update package." Therefore, these devices (or attackers who are spoofing these devices) can continue to use an unauthenticated cloud service for an indeterminate time period (possibly forever). Once an individual device's firmware is updated, and authentication occurs once, the cloud service recategorizes the device so that authentication is subsequently always required, and spoofing cannot occur.
CVE-2020-27220 The Eclipse Hono AMQP and MQTT protocol adapters do not check whether an authenticated gateway device is authorized to receive command & control messages when it has subscribed only to commands for a specific device. The missing check involves verifying that the command target device is configured giving permission for the gateway device to act on its behalf. This means an authenticated device of a certain tenant, notably also a non-gateway device acting like a gateway, may receive command & control messages targeted at a different device of the same tenant without corresponding permissions getting checked.
CVE-2020-27185 Cleartext transmission of sensitive information via Moxa Service in NPort IA5000A series serial devices. Successfully exploiting the vulnerability could enable attackers to read authentication data, device configuration, and other sensitive data transmitted over Moxa Service.
CVE-2020-27123 A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to read arbitrary files on the underlying operating system of an affected device. The vulnerability is due to an exposed IPC function. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process on an affected device. A successful exploit could allow the attacker to read arbitrary files on the underlying operating system of the affected device.
CVE-2020-27122 A vulnerability in the Microsoft Active Directory integration of Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to elevate privileges on an affected device. To exploit this vulnerability, an attacker would need to have a valid administrator account on an affected device. The vulnerability is due to incorrect privilege assignment. An attacker could exploit this vulnerability by logging in to the system with a crafted Active Directory account. A successful exploit could allow the attacker to obtain root privileges on an affected device.
CVE-2020-27121 A vulnerability in Cisco Unified Communications Manager IM &amp; Presence Service (Unified CM IM&amp;P) Software could allow an authenticated, remote attacker to cause the Cisco XCP Authentication Service on an affected device to restart, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of login requests. An attacker could exploit this vulnerability by sending a crafted client login request to an affected device. A successful exploit could allow the attacker to cause a process to crash, resulting in a DoS condition for new login attempts. Users who are authenticated at the time of the attack would not be affected. There are workarounds that address this vulnerability.
CVE-2020-26801 A stored cross-site scripting (XSS) vulnerability was discovered in /Forms/device_vars_1 on TrippLite SU2200RTXL2Ua with firmware version 12.04.0055. This vulnerability allows authenticated attackers to obtain other users' information via a crafted POST request.
CVE-2020-26567 An issue was discovered on D-Link DSR-250N before 3.17B devices. The CGI script upgradeStatusReboot.cgi can be accessed without authentication. Any access reboots the device, rendering it therefore unusable for several minutes.
CVE-2020-26560 Bluetooth Mesh Provisioning in the Bluetooth Mesh profile 1.0 and 1.0.1 may permit a nearby device, reflecting the authentication evidence from a Provisioner, to complete authentication without possessing the AuthValue, and potentially acquire a NetKey and AppKey.
CVE-2020-26558 Bluetooth LE and BR/EDR secure pairing in Bluetooth Core Specification 2.1 through 5.2 may permit a nearby man-in-the-middle attacker to identify the Passkey used during pairing (in the Passkey authentication procedure) by reflection of the public key and the authentication evidence of the initiating device, potentially permitting this attacker to complete authenticated pairing with the responding device using the correct Passkey for the pairing session. The attack methodology determines the Passkey value one bit at a time.
CVE-2020-26556 Mesh Provisioning in the Bluetooth Mesh profile 1.0 and 1.0.1 may permit a nearby device, able to conduct a successful brute-force attack on an insufficiently random AuthValue before the provisioning procedure times out, to complete authentication by leveraging Malleable Commitment.
CVE-2020-26086 A vulnerability in the video endpoint API (xAPI) of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an authenticated, remote attacker to gain access to sensitive information on an affected device. The vulnerability is due to improper storage of sensitive information on an affected device. An attacker could exploit this vulnerability by accessing information that should not be accessible to users with low privileges. A successful exploit could allow the attacker to gain access to sensitive information.
CVE-2020-26084 A vulnerability in the REST API of Cisco Edge Fog Fabric could allow an authenticated, remote attacker to access files outside of their authorization sphere on an affected device. The vulnerability is due to incorrect authorization enforcement on an affected system. An attacker could exploit this vulnerability by sending a crafted request to the API. A successful exploit could allow the attacker to overwrite arbitrary files on the affected device.
CVE-2020-26079 A vulnerability in the web UI of Cisco IoT Field Network Director (FND) could allow an authenticated, remote attacker to obtain hashes of user passwords on an affected device. The vulnerability is due to insufficient protection of user credentials. An attacker could exploit this vulnerability by logging in as an administrative user and crafting a call for user information. A successful exploit could allow the attacker to obtain hashes of user passwords on an affected device.
CVE-2020-26076 A vulnerability in Cisco IoT Field Network Director (FND) could allow an unauthenticated, remote attacker to view sensitive database information on an affected device. The vulnerability is due to the absence of authentication for sensitive information. An attacker could exploit this vulnerability by sending crafted curl commands to an affected device. A successful exploit could allow the attacker to view sensitive database information on the affected device.
CVE-2020-26075 A vulnerability in the REST API of Cisco IoT Field Network Director (FND) could allow an authenticated, remote attacker to gain access to the back-end database of an affected device. The vulnerability is due to insufficient input validation of REST API requests that are made to an affected device. An attacker could exploit this vulnerability by crafting malicious API requests to the affected device. A successful exploit could allow the attacker to gain access to the back-end database of the affected device.
CVE-2020-26068 A vulnerability in the xAPI service of Cisco Telepresence CE Software and Cisco RoomOS Software could allow an authenticated, remote attacker to generate an access token for an affected device. The vulnerability is due to insufficient access authorization. An attacker could exploit this vulnerability by using the xAPI service to generate a specific token. A successful exploit could allow the attacker to use the generated token to enable experimental features on the device that should not be available to users.
CVE-2020-25206 The web console for Mimosa B5, B5c, and C5x firmware through 2.8.0.2 allows authenticated command injection in the Throughput, WANStats, PhyStats, and QosStats API classes. An attacker with access to a web console account may execute operating system commands on affected devices by sending crafted POST requests to the affected endpoints (/core/api/calls/Throughput.php, /core/api/calls/WANStats.php, /core/api/calls/PhyStats.php, /core/api/calls/QosStats.php). This results in the complete takeover of the vulnerable device. This vulnerability does not occur in the older 1.5.x firmware versions.
CVE-2020-25183 Medtronic MyCareLink Smart 25000 all versions contain an authentication protocol vuln where the method used to auth between MCL Smart Patient Reader and MyCareLink Smart mobile app is vulnerable to bypass. This vuln allows attacker to use other mobile device or malicious app on smartphone to auth to the patient&#8217;s Smart Reader, fools the device into thinking its communicating with the actual smart phone application when executed in range of Bluetooth.
CVE-2020-23512 VR CAM P1 Model P1 v1 has an incorrect access control vulnerability where an attacker can obtain complete access of the device from web (remote) without authentication.
CVE-2020-2031 An integer underflow vulnerability in the dnsproxyd component of the PAN-OS management interface allows authenticated administrators to issue a command from the command line interface that causes the component to stop responding. Repeated attempts to send this request result in denial of service to all PAN-OS services by restarting the device and putting it into maintenance mode. This issue impacts: PAN-OS 9.1 versions earlier than PAN-OS 9.1.3. This issue does not impact PAN-OS 8.1, PAN-OS 9.0, or Prisma Access services.
CVE-2020-1995 A NULL pointer dereference vulnerability in Palo Alto Networks PAN-OS allows an authenticated administrator to send a request that causes the rasmgr daemon to crash. Repeated attempts to send this request result in denial of service to all PAN-OS services by restarting the device and putting it into maintenance mode. This issue affects: PAN-OS 9.1 versions earlier than 9.1.2.
CVE-2020-19419 Incorrect Access Control in Emerson Smart Wireless Gateway 1420 4.6.59 allows remote attackers to obtain sensitive device information from the administrator console without authentication.
CVE-2020-1878 Huawei smartphone OxfordS-AN00A with versions earlier than 10.0.1.152D(C735E152R3P3),versions earlier than 10.0.1.160(C00E160R4P1) have an improper authentication vulnerability. Authentication to target component is improper when device performs an operation. Attackers exploit this vulnerability to obtain some information by loading malicious application, leading to information leak.
CVE-2020-1864 Some Huawei products have a security vulnerability due to improper authentication. A remote attacker needs to obtain some information and forge the peer device to send specific packets to the affected device. Due to the improper implementation of the authentication function, attackers can exploit the vulnerability to connect to affected devices and execute a series of commands.Affected product versions include:Secospace AntiDDoS8000 versions V500R001C00,V500R001C20,V500R001C60,V500R005C00.
CVE-2020-1842 Huawei HEGE-560 version 1.0.1.20(SP2); OSCA-550 and OSCA-550A version 1.0.0.71(SP1); and OSCA-550AX and OSCA-550X version 1.0.0.71(SP2) have an insufficient authentication vulnerability. An attacker can access the device physically and perform specific operations to exploit this vulnerability. Successful exploitation may cause the attacker obtain high privilege.
CVE-2020-1838 HUAWEI Mate 30 Pro with versions earlier than 10.1.0.150(C00E136R5P3) have is an improper authentication vulnerability. The device does not sufficiently validate certain credential of user's face, an attacker could craft the credential of the user, successful exploit could allow the attacker to pass the authentication with the crafted credential.
CVE-2020-1688 On Juniper Networks SRX Series and NFX Series, a local authenticated user with access to the shell may obtain the Web API service private key that is used to provide encrypted communication between the Juniper device and the authenticator services. Exploitation of this vulnerability may allow an attacker to decrypt the communications between the Juniper device and the authenticator service. This Web API service is used for authentication services such as the Juniper Identity Management Service, used to obtain user identity for Integrated User Firewall feature, or the integrated ClearPass authentication and enforcement feature. This issue affects Juniper Networks Junos OS on Networks SRX Series and NFX Series: 12.3X48 versions prior to 12.3X48-D105; 15.1X49 versions prior to 15.1X49-D190; 16.1 versions prior to 16.1R7-S8; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S11, 17.4R3; 18.1 versions prior to 18.1R3-S7; 18.2 versions prior to 18.2R3; 18.3 versions prior to 18.3R2-S4, 18.3R3; 18.4 versions prior to 18.4R1-S7, 18.4R2; 19.1 versions prior to 19.1R2; 19.2 versions prior to 19.2R1-S4, 19.2R2.
CVE-2020-1673 Insufficient Cross-Site Scripting (XSS) protection in Juniper Networks J-Web and web based (HTTP/HTTPS) services allows an unauthenticated attacker to hijack the target user's HTTP/HTTPS session and perform administrative actions on the Junos device as the targeted user. This issue only affects Juniper Networks Junos OS devices with HTTP/HTTPS services enabled such as J-Web, Web Authentication, Dynamic-VPN (DVPN), Firewall Authentication Pass-Through with Web-Redirect, and Zero Touch Provisioning (ZTP). Junos OS devices with HTTP/HTTPS services disabled are not affected. If HTTP/HTTPS services are enabled, the following command will show the httpd processes: user@device> show system processes | match http 5260 - S 0:00.13 /usr/sbin/httpd-gk -N 5797 - I 0:00.10 /usr/sbin/httpd --config /jail/var/etc/httpd.conf In order to successfully exploit this vulnerability, the attacker needs to convince the device administrator to take action such as clicking the crafted URL sent via phishing email or convince the administrator to input data in the browser console. This issue affects Juniper Networks Junos OS: 18.1 versions prior to 18.1R3-S1; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R2-S5, 18.4R3-S2; 19.1 versions prior to 19.1R2-S2, 19.1R3-S1; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2; 20.1 versions prior to 20.1R1-S2, 20.1R2. This issue does not affect Juniper Networks Junos OS prior to 18.1R1.
CVE-2020-16630 TI&#8217;s BLE stack caches and reuses the LTK&#8217;s property for a bonded mobile. A LTK can be an unauthenticated-and-no-MITM-protection key created by Just Works or an authenticated-and-MITM-protection key created by Passkey Entry, Numeric Comparison or OOB. Assume that a victim mobile uses secure pairing to pair with a victim BLE device based on TI chips and generate an authenticated-and-MITM-protection LTK. If a fake mobile with the victim mobile&#8217;s MAC address uses Just Works and pairs with the victim device, the generated LTK still has the property of authenticated-and-MITM-protection. Therefore, the fake mobile can access attributes with the authenticated read/write permission.
CVE-2020-1643 Execution of the "show ospf interface extensive" or "show ospf interface detail" CLI commands on a Juniper Networks device running Junos OS may cause the routing protocols process (RPD) to crash and restart if OSPF interface authentication is configured, leading to a Denial of Service (DoS). By continuously executing the same CLI commands, a local attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Note: Only systems utilizing ARM processors, found on the EX2300 and EX3400, are vulnerable to this issue. Systems shipped with other processor architectures are not vulnerable to this issue. The processor architecture can be displayed via the 'uname -a' command. For example: ARM (vulnerable): % uname -a | awk '{print $NF}' arm PowerPC (not vulnerable): % uname -a | awk '{print $NF}' powerpc AMD (not vulnerable): % uname -a | awk '{print $NF}' amd64 Intel (not vulnerable): % uname -a | awk '{print $NF}' i386 This issue affects Juniper Networks Junos OS: 12.3X48 versions prior to 12.3X48-D100; 14.1X53 versions prior to 14.1X53-D140, 14.1X53-D54; 15.1 versions prior to 15.1R7-S7; 15.1X49 versions prior to 15.1X49-D210; 15.1X53 versions prior to 15.1X53-D593; 16.1 versions prior to 16.1R7-S8; 17.1 versions prior to 17.1R2-S12; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S2, 17.4R3; 18.1 versions prior to 18.1R3-S2; 18.2 versions prior to 18.2R2, 18.2R3; 18.2X75 versions prior to 18.2X75-D40; 18.3 versions prior to 18.3R1-S2, 18.3R2.
CVE-2020-1631 A vulnerability in the HTTP/HTTPS service used by J-Web, Web Authentication, Dynamic-VPN (DVPN), Firewall Authentication Pass-Through with Web-Redirect, and Zero Touch Provisioning (ZTP) allows an unauthenticated attacker to perform local file inclusion (LFI) or path traversal. Using this vulnerability, an attacker may be able to inject commands into the httpd.log, read files with 'world' readable permission file or obtain J-Web session tokens. In the case of command injection, as the HTTP service runs as user 'nobody', the impact of this command injection is limited. (CVSS score 5.3, vector CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N) In the case of reading files with 'world' readable permission, in Junos OS 19.3R1 and above, the unauthenticated attacker would be able to read the configuration file. (CVSS score 5.9, vector CVSS:3.1/ AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N) If J-Web is enabled, the attacker could gain the same level of access of anyone actively logged into J-Web. If an administrator is logged in, the attacker could gain administrator access to J-Web. (CVSS score 8.8, vector CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H) This issue only affects Juniper Networks Junos OS devices with HTTP/HTTPS services enabled. Junos OS devices with HTTP/HTTPS services disabled are not affected. If HTTP/HTTPS services are enabled, the following command will show the httpd processes: user@device> show system processes | match http 5260 - S 0:00.13 /usr/sbin/httpd-gk -N 5797 - I 0:00.10 /usr/sbin/httpd --config /jail/var/etc/httpd.conf To summarize: If HTTP/HTTPS services are disabled, there is no impact from this vulnerability. If HTTP/HTTPS services are enabled and J-Web is not in use, this vulnerability has a CVSS score of 5.9 (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). If J-Web is enabled, this vulnerability has a CVSS score of 8.8 (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H). Juniper SIRT has received a single report of this vulnerability being exploited in the wild. Out of an abundance of caution, we are notifying customers so they can take appropriate actions. Indicators of Compromise: The /var/log/httpd.log may have indicators that commands have injected or files being accessed. The device administrator can look for these indicators by searching for the string patterns "=*;*&" or "*%3b*&" in /var/log/httpd.log, using the following command: user@device> show log httpd.log | match "=*;*&|=*%3b*&" If this command returns any output, it might be an indication of malicious attempts or simply scanning activities. Rotated logs should also be reviewed, using the following command: user@device> show log httpd.log.0.gz | match "=*;*&|=*%3b*&" user@device> show log httpd.log.1.gz | match "=*;*&|=*%3b*&" Note that a skilled attacker would likely remove these entries from the local log file, thus effectively eliminating any reliable signature that the device had been attacked. This issue affects Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S16; 12.3X48 versions prior to 12.3X48-D101, 12.3X48-D105; 14.1X53 versions prior to 14.1X53-D54; 15.1 versions prior to 15.1R7-S7; 15.1X49 versions prior to 15.1X49-D211, 15.1X49-D220; 16.1 versions prior to 16.1R7-S8; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S4; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R3-S2 ; 18.4 version 18.4R2 and later versions; 19.1 versions prior to 19.1R1-S5, 19.1R3-S1; 19.1 version 19.1R2 and later versions; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2; 20.1 versions prior to 20.1R1-S1, 20.1R2.
CVE-2020-1630 A privilege escalation vulnerability in Juniper Networks Junos OS devices configured with dual Routing Engines (RE), Virtual Chassis (VC) or high-availability cluster may allow a local authenticated low-privileged user with access to the shell to perform unauthorized configuration modification. This issue does not affect Junos OS device with single RE or stand-alone configuration. This issue affects Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S14; 12.3X48 versions prior to 12.3X48-D86, 12.3X48-D90; 14.1X53 versions prior to 14.1X53-D51; 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D181, 15.1X49-D190; 15.1X53 versions prior to 15.1X53-D592; 16.1 versions prior to 16.1R4-S13, 16.1R7-S6; 16.2 versions prior to 16.2R2-S10; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R1-S9, 17.2R3-S3; 17.3 versions prior to 17.3R3-S6; 17.4 versions prior to 17.4R2-S6, 17.4R3; 18.1 versions prior to 18.1R3-S7; 18.2 versions prior to 18.2R2-S5, 18.2R3-S1; 18.2 versions prior to 18.2X75-D12, 18.2X75-D33, 18.2X75-D420, 18.2X75-D60, 18.2X75-D411; 18.3 versions prior to 18.3R1-S5, 18.3R2-S1, 18.3R3; 18.4 versions prior to 18.4R1-S4, 18.4R2-S1, 18.4R3; 19.1 versions prior to 19.1R1-S2, 19.1R2; 19.2 versions prior to 19.2R1-S1, 19.2R2.
CVE-2020-16231 The affected Bachmann Electronic M-Base Controllers of version MSYS v1.06.14 and later use weak cryptography to protect device passwords. Affected controllers that are actively supported include MX207, MX213, MX220, MC206, MC212, MC220, and MH230 hardware controllers, and affected end-of-life controller include MC205, MC210, MH212, ME203, CS200, MP213, MP226, MPC240, MPC265, MPC270, MPC293, MPE270, and CPC210 hardware controllers. Security Level 0 is set at default from the manufacturer, which could allow an unauthenticated remote attacker to gain access to the password hashes. Security Level 4 is susceptible if an authenticated remote attacker or an unauthenticated person with physical access to the device reads and decrypts the password to conduct further attacks.
CVE-2020-16208 The affected product is vulnerable to cross-site request forgery, which may allow an attacker to modify different configurations of a device by luring an authenticated user to click on a crafted link on the N-Tron 702-W / 702M12-W (all versions).
CVE-2020-1619 A privilege escalation vulnerability in Juniper Networks QFX10K Series, EX9200 Series, MX Series, and PTX Series with Next-Generation Routing Engine (NG-RE), allows a local authenticated high privileged user to access the underlying WRL host. This issue only affects QFX10K Series with NG-RE, EX9200 Series with NG-RE, MX Series with NG-RE and PTX Series with NG-RE; which uses vmhost. This issue affects Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S6; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R2-S11, 17.1R3; 17.2 versions prior to 17.2R1-S9, 17.2R3-S3; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7; 17.4 versions prior to 17.4R2-S7, 17.4R3; 18.1 versions prior to 18.1R3-S4; 18.2 versions prior to 18.2R3; 18.2X75 versions prior to 18.2X75-D50; 18.3 versions prior to 18.3R2; 18.4 versions prior to 18.4R2. To identify whether the device has NG-RE with vmhost, customer can run the following command: > show vmhost status Compute cluster: rainier-re-cc Compute Node: rainier-re-cn, Online If the "show vmhost status" is not supported, then the device does not have NG-RE with vmhost.
CVE-2020-1618 On Juniper Networks EX and QFX Series, an authentication bypass vulnerability may allow a user connected to the console port to login as root without any password. This issue might only occur in certain scenarios: &#8226; At the first reboot after performing device factory reset using the command &#8220;request system zeroize&#8221;; or &#8226; A temporary moment during the first reboot after the software upgrade when the device configured in Virtual Chassis mode. This issue affects Juniper Networks Junos OS on EX and QFX Series: 14.1X53 versions prior to 14.1X53-D53; 15.1 versions prior to 15.1R7-S4; 15.1X53 versions prior to 15.1X53-D593; 16.1 versions prior to 16.1R7-S4; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R3-S3; 17.3 versions prior to 17.3R2-S5, 17.3R3-S6; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R2; 18.3 versions prior to 18.3R1-S7, 18.3R2. This issue does not affect Juniper Networks Junos OS 12.3.
CVE-2020-1606 A path traversal vulnerability in the Juniper Networks Junos OS device may allow an authenticated J-web user to read files with 'world' readable permission and delete files with 'world' writeable permission. This issue does not affect system files that can be accessed only by root user. This issue affects Juniper Networks Junos OS: 12.3 versions prior to 12.3R12-S13; 12.3X48 versions prior to 12.3X48-D85 on SRX Series; 14.1X53 versions prior to 14.1X53-D51; 15.1F6 versions prior to 15.1F6-S13; 15.1 versions prior to 15.1R7-S5; 15.1X49 versions prior to 15.1X49-D180 on SRX Series; 15.1X53 versions prior to 15.1X53-D238 on QFX5200/QFX5110 Series; 16.1 versions prior to 16.1R4-S13, 16.1R7-S5; 16.2 versions prior to 16.2R2-S10; 17.1 versions prior to 17.1R3-S1; 17.2 versions prior to 17.2R1-S9, 17.2R3-S2; 17.3 versions prior to 17.3R2-S5, 17.3R3-S5; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R3; 18.3 versions prior to 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R1-S4, 19.1R2.
CVE-2020-15942 An information disclosure vulnerability in Web Vulnerability Scan profile of Fortinet's FortiWeb version 6.2.x below 6.2.4 and version 6.3.x below 6.3.5 may allow a remote authenticated attacker to read the password used by the FortiWeb scanner to access the device defined in the scan profile.
CVE-2020-15939 An improper access control vulnerability (CWE-284) in FortiSandbox versions 3.2.1 and below and 3.1.4 and below may allow an authenticated, unprivileged attacker to download the device configuration file via the recovery URL.
CVE-2020-15873 In LibreNMS before 1.65.1, an authenticated attacker can achieve SQL Injection via the customoid.inc.php device_id POST parameter to ajax_form.php.
CVE-2020-15798 A vulnerability has been identified in SIMATIC HMI Comfort Panels (incl. SIPLUS variants) (All versions < V16 Update 3a), SIMATIC HMI KTP Mobile Panels (All versions < V16 Update 3a), SINAMICS GH150 (All versions), SINAMICS GL150 (with option X30) (All versions), SINAMICS GM150 (with option X30) (All versions), SINAMICS SH150 (All versions), SINAMICS SL150 (All versions), SINAMICS SM120 (All versions), SINAMICS SM150 (All versions), SINAMICS SM150i (All versions). Affected devices with enabled telnet service do not require authentication for this service. This could allow a remote attacker to gain full access to the device. (ZDI-CAN-12046)
CVE-2020-15632 This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-842 3.13B05 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of HNAP GetCAPTCHAsetting requests. The issue results from the lack of proper handling of sessions. An attacker can leverage this vulnerability to execute arbitrary code in the context of the device. Was ZDI-CAN-10083.
CVE-2020-15631 This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1860 1.04B03_HOTFIX WiFi extenders. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the HNAP service, which listens on TCP port 80 by default. When parsing the SOAPAction header, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-10084.
CVE-2020-1485 An information disclosure vulnerability exists when the Windows Image Acquisition (WIA) Service improperly discloses contents of its memory. An attacker who successfully exploited the vulnerability could obtain information to further compromise the user&#8217;s system. To exploit the vulnerability, an authenticated attacker could connect an imaging device (camera, scanner, cellular phone) to an affected system and run a specially crafted application to disclose information. The security update addresses the vulnerability by correcting how the WIA Service handles objects in memory.
CVE-2020-1474 An information disclosure vulnerability exists when the Windows Image Acquisition (WIA) Service improperly discloses contents of its memory. An attacker who successfully exploited the vulnerability could obtain information to further compromise the user&#8217;s system. To exploit the vulnerability, an authenticated attacker could connect an imaging device (camera, scanner, cellular phone) to an affected system and run a specially crafted application to disclose information. The security update addresses the vulnerability by correcting how the WIA Service handles objects in memory.
CVE-2020-14081 TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action send_log_email with the key auth_acname (or auth_passwd), allowing an authenticated user to run arbitrary commands on the device.
CVE-2020-14075 TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action pppoe_connect, ru_pppoe_connect, or dhcp_connect with the key wan_ifname (or wan0_dns), allowing an authenticated user to run arbitrary commands on the device.
CVE-2020-12638 An encryption-bypass issue was discovered on Espressif ESP-IDF devices through 4.2, ESP8266_NONOS_SDK devices through 3.0.3, and ESP8266_RTOS_SDK devices through 3.3. Broadcasting forged beacon frames forces a device to change its authentication mode to OPEN, effectively disabling its 802.11 encryption.
CVE-2020-12266 An issue was discovered where there are multiple externally accessible pages that do not require any sort of authentication, and store system information for internal usage. The devices automatically query these pages to update dashboards and other statistics, but the pages can be accessed externally without any authentication. All the pages follow the naming convention live_(string).shtml. Among the information disclosed is: interface status logs, IP address of the device, MAC address of the device, model and current firmware version, location, all running processes, all interfaces and their statuses, all current DHCP leases and the associated hostnames, all other wireless networks in range of the router, memory statistics, and components of the configuration of the device such as enabled features. Affected devices: Affected devices are: Wavlink WN530HG4, Wavlink WN575A3, Wavlink WN579G3,Wavlink WN531G3, Wavlink WN533A8, Wavlink WN531A6, Wavlink WN551K1, Wavlink WN535G3, Wavlink WN530H4, Wavlink WN57X93, WN572HG3, Wavlink WN578A2, Wavlink WN579G3, Wavlink WN579X3, and Jetstream AC3000/ERAC3000
CVE-2020-12017 GE Grid Solutions Reason RT Clocks, RT430, RT431, and RT434, all firmware versions prior to 08A05. The device&#8217;s vulnerability in the web application could allow multiple unauthenticated attacks that could cause serious impact. The vulnerability may allow an unauthenticated attacker to execute arbitrary commands and send a request to a specific URL that could cause the device to become unresponsive. The unauthenticated attacker may change the password of the 'configuration' user account, allowing the attacker to modify the configuration of the device via the web interface using the new password. This vulnerability may also allow an unauthenticated attacker to bypass the authentication required to configure the device and reboot the system.
CVE-2020-11925 An issue was discovered in Luvion Grand Elite 3 Connect through 2020-02-25. Authentication to the device is based on a username and password. The root credentials are the same across all devices of this model.
CVE-2020-11539 An issue was discovered on Tata Sonata Smart SF Rush 1.12 devices. It has been identified that the smart band has no pairing (mode 0 Bluetooth LE security level) The data being transmitted over the air is not encrypted. Adding to this, the data being sent to the smart band doesn't have any authentication or signature verification. Thus, any attacker can control a parameter of the device.
CVE-2020-11447 An issue was discovered on Bell HomeHub 3000 SG48222070 devices. Remote authenticated users can retrieve the serial number via cgi/json-req - this is an information leak because the serial number is intended to prove an actor's physical access to the device.
CVE-2020-10974 An issue was discovered affecting a backup feature where a crafted POST request returns the current configuration of the device in cleartext, including the administrator password. No authentication is required. Affected devices: Wavlink WN575A3, Wavlink WN579G3, Wavlink WN531A6, Wavlink WN535G3, Wavlink WN530H4, Wavlink WN57X93, Wavlink WN572HG3, Wavlink WN575A4, Wavlink WN578A2, Wavlink WN579G3, Wavlink WN579X3, and Jetstream AC3000/ERAC3000
CVE-2020-10973 An issue was discovered in Wavlink WN530HG4, Wavlink WN531G3, Wavlink WN533A8, and Wavlink WN551K1 affecting /cgi-bin/ExportAllSettings.sh where a crafted POST request returns the current configuration of the device, including the administrator password. No authentication is required. The attacker must perform a decryption step, but all decryption information is readily available.
CVE-2020-10921 This vulnerability allows remote attackers to issue commands on affected installations of C-MORE HMI EA9 Firmware version 6.52 touch screen panels. Authentication is not required to exploit this vulnerability. The specific flaw exists within the EA-HTTP.exe process. The issue results from the lack of authentication prior to allowing alterations to the system configuration. An attacker can leverage this vulnerability to issue commands to the physical equipment controlled by the device. Was ZDI-CAN-10482.
CVE-2020-10920 This vulnerability allows remote attackers to execute arbitrary code on affected installations of C-MORE HMI EA9 Firmware version 6.52 touch screen panels. Authentication is not required to exploit this vulnerability. The specific flaw exists within the control service, which listens on TCP port 9999 by default. The issue results from the lack of authentication prior to allowing alterations to the system configuration. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-10493.
CVE-2020-10916 This vulnerability allows network-adjacent attackers to escalate privileges on affected installations of TP-Link TL-WA855RE Firmware Ver: 855rev4-up-ver1-0-1-P1[20191213-rel60361] Wi-Fi extenders. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the first-time setup process. The issue results from the lack of proper validation on first-time setup requests. An attacker can leverage this vulnerability to reset the password for the Admin account and execute code in the context of the device. Was ZDI-CAN-10003.
CVE-2020-10669 The web application exposed by the Canon Oce Colorwave 500 4.0.0.0 printer is vulnerable to authentication bypass on the page /home.jsp. An unauthenticated attacker able to connect to the device's web interface can get a copy of the documents uploaded by any users. NOTE: this is fixed in the latest version.
CVE-2020-10627 Insulet Omnipod Insulin Management System insulin pump product ID 19191 and 40160 is designed to communicate using a wireless RF with an Insulet manufactured Personal Diabetes Manager device. This wireless RF communication protocol does not properly implement authentication or authorization. An attacker with access to one of the affected insulin pump models may be able to modify and/or intercept data. This vulnerability could also allow attackers to change pump settings and control insulin delivery.
CVE-2020-10583 The /admin/admapi.php script of Invigo Automatic Device Management (ADM) through 5.0 allows remote authenticated attackers to execute arbitrary OS commands on the server as the user running the application.
CVE-2020-10580 A command injection on the /admin/broadcast.php script of Invigo Automatic Device Management (ADM) through 5.0 allows remote authenticated attackers to execute arbitrary PHP code on the server as the user running the application.
CVE-2020-10135 Legacy pairing and secure-connections pairing authentication in Bluetooth BR/EDR Core Specification v5.2 and earlier may allow an unauthenticated user to complete authentication without pairing credentials via adjacent access. An unauthenticated, adjacent attacker could impersonate a Bluetooth BR/EDR master or slave to pair with a previously paired remote device to successfully complete the authentication procedure without knowing the link key.
CVE-2020-10038 A vulnerability has been identified in SICAM MMU (All versions < V2.05), SICAM SGU (All versions), SICAM T (All versions < V2.18). An attacker with access to the device's web server might be able to execute administrative commands without authentication.
CVE-2019-9950 Western Digital My Cloud, My Cloud Mirror Gen2, My Cloud EX2 Ultra, My Cloud EX2100, My Cloud EX4100, My Cloud DL2100, My Cloud DL4100, My Cloud PR2100 and My Cloud PR4100 firmware before 2.31.174 is affected by an authentication bypass vulnerability. The login_mgr.cgi file checks credentials against /etc/shadow. However, the "nobody" account (which can be used to access the control panel API as a low-privilege logged-in user) has a default empty password, allowing an attacker to modify the My Cloud EX2 Ultra web page source code and obtain access to the My Cloud as a non-Admin My Cloud device user.
CVE-2019-9939 The SHAREit application before 4.0.36 for Android allows a remote attacker (on the same network or joining public "open" Wi-Fi hotspots created by the application when file transfer is initiated) to bypass authentication by trying to fetch a non-existing page. When the non-existing page is requested, the application responds with a 200 status code and empty page, and adds the requesting client device into the list of recognized devices.
CVE-2019-9938 The SHAREit application before 4.0.42 for Android allows a remote attacker (on the same network or joining public "open" Wi-Fi hotspots created by the application when file transfer is initiated) to download arbitrary files from the device including contacts, photos, videos, sound clips, etc. The attacker must be authenticated as a "recognized device."
CVE-2019-9533 The root password of the Cobham EXPLORER 710 is the same for all versions of firmware up to and including v1.08. This could allow an attacker to reverse-engineer the password from available versions to gain authenticated access to the device.
CVE-2019-9529 The web application portal of the Cobham EXPLORER 710, firmware version 1.07, has no authentication by default. This could allow an unauthenticated, local attacker connected to the device to access the portal and to make any change to the device.
CVE-2019-8985 On Netis WF2411 with firmware 2.1.36123 and other Netis WF2xxx devices (possibly WF2411 through WF2880), there is a stack-based buffer overflow that does not require authentication. This can cause denial of service (device restart) or remote code execution. This vulnerability can be triggered by a GET request with a long HTTP "Authorization: Basic" header that is mishandled by user_auth->user_ok in /bin/boa.
CVE-2019-7929 An information leakage vulnerability exists in Magento 2.1 prior to 2.1.18, Magento 2.2 prior to 2.2.9, Magento 2.3 prior to 2.3.2. An authenticated user with administrator privileges may be able to view metadata of a trusted device used by another administrator via a crafted http request.
CVE-2019-7385 An authenticated shell command injection issue has been discovered in Raisecom ISCOM HT803G-U, HT803G-W, HT803G-1GE, and HT803G GPON products with the firmware version ISCOMHT803G-U_2.0.0_140521_R4.1.47.002 or below, The values of the newpass and confpass parameters in /bin/WebMGR are used in a system call in the firmware. Because there is no user input validation, this leads to authenticated code execution on the device.
CVE-2019-7384 An authenticated shell command injection issue has been discovered in Raisecom ISCOM HT803G-U, HT803G-W, HT803G-1GE, and HT803G GPON products with the firmware version ISCOMHT803G-U_2.0.0_140521_R4.1.47.002 or below. The value of the fmgpon_loid parameter is used in a system call inside the boa binary. Because there is no user input validation, this leads to authenticated code execution on the device.
CVE-2019-6820 A CWE-306: Missing Authentication for Critical Function vulnerability exists which could cause a modification of device IP configuration (IP address, network mask and gateway IP address) when a specific Ethernet frame is received in all versions of: Modicon M100, Modicon M200, Modicon M221, ATV IMC drive controller, Modicon M241, Modicon M251, Modicon M258, Modicon LMC058, Modicon LMC078, PacDrive Eco ,PacDrive Pro, PacDrive Pro2
CVE-2019-6744 This vulnerability allows local attackers to disclose sensitive information on affected installations of Samsung Knox 1.2.02.39 on Samsung Galaxy S9 build G9600ZHS3ARL1 Secure Folder. An attacker must first obtain physical access to the device in order to exploit this vulnerability. The specific flaws exists within the the handling of the lock screen for Secure Folder. The issue results from the lack of proper validation that a user has correctly authenticated. An attacker can leverage this vulnerability to disclose the contents of the secure container. Was ZDI-CAN-7381.
CVE-2019-6551 Pangea Communications Internet FAX ATA all Versions 3.1.8 and prior allow an attacker to bypass user authentication using a specially crafted URL to cause the device to reboot, which may be used to cause a continual denial-of-service condition.
CVE-2019-6538 The Conexus telemetry protocol utilized within Medtronic MyCareLink Monitor versions 24950 and 24952, CareLink Monitor version 2490C, CareLink 2090 Programmer, Amplia CRT-D, Claria CRT-D, Compia CRT-D, Concerto CRT-D, Concerto II CRT-D, Consulta CRT-D, Evera ICD, Maximo II CRT-D and ICD, Mirro ICD, Nayamed ND ICD, Primo ICD, Protecta ICD and CRT-D, Secura ICD, Virtuoso ICD, Virtuoso II ICD, Visia AF ICD, and Viva CRT-D does not implement authentication or authorization. An attacker with adjacent short-range access to an affected product, in situations where the product&#8217;s radio is turned on, can inject, replay, modify, and/or intercept data within the telemetry communication. This communication protocol provides the ability to read and write memory values to affected implanted cardiac devices; therefore, an attacker could exploit this communication protocol to change memory in the implanted cardiac device.
CVE-2019-5688 NVIDIA NVFlash, NVUFlash Tool prior to v5.588.0 and GPUModeSwitch Tool prior to 2019-11, NVIDIA kernel mode driver (nvflash.sys, nvflsh32.sys, and nvflsh64.sys) contains a vulnerability in which authenticated users with administrative privileges can gain access to device memory and registers of other devices not managed by NVIDIA, which may lead to escalation of privileges, information disclosure, or denial of service.
CVE-2019-5635 A cleartext transmission of sensitive information vulnerability is present in Hickory Smart Ethernet Bridge from Belwith Products, LLC. Captured data reveals that the Hickory Smart Ethernet Bridge device communicates over the network to an MQTT broker without using encryption. This exposed the default username and password used to authenticate to the MQTT broker. This issue affects Hickory Smart Ethernet Bridge, model number H077646. The firmware does not appear to contain versioning information.
CVE-2019-5625 The Android mobile application Halo Home before 1.11.0 stores OAuth authentication and refresh access tokens in a clear text file. This file persists until the user logs out of the application and reboots the device. This vulnerability can allow an attacker to impersonate the legitimate user by reusing the stored OAuth token, thus allowing them to view and change the user's personal information stored in the backend cloud service. The attacker would first need to gain physical control of the Android device or compromise it with a malicious app.
CVE-2019-5616 CircuitWerkes Sicon-8, a hardware device used for managing electrical devices, ships with a web-based front-end controller and implements an authentication mechanism in JavaScript that is run in the context of a user's web browser.
CVE-2019-5253 E5572-855 with versions earlier than 8.0.1.3(H335SP1C233) has an improper authentication vulnerability. The device does not perform a sufficient authentication when doing certain operations, successful exploit could allow an attacker to cause the device to reboot after launch a man in the middle attack.
CVE-2019-5218 There is an insufficient authentication vulnerability in Huawei Band 2 and Honor Band 3. The band does not sufficiently authenticate the device try to connect to it in certain scenario. Successful exploit could allow the attacker to spoof then connect to the band.
CVE-2019-5165 An exploitable authentication bypass vulnerability exists in the hostname processing of the Moxa AWK-3131A firmware version 1.13. A specially configured device hostname can cause the device to interpret select remote traffic as local traffic, resulting in a bypass of web authentication. An attacker can send authenticated SNMP requests to trigger this vulnerability.
CVE-2019-5162 An exploitable improper access control vulnerability exists in the iw_webs account settings functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted user name entry can cause the overwrite of an existing user account password, resulting in remote shell access to the device as that user. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.
CVE-2019-5142 An exploitable command injection vulnerability exists in the hostname functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted entry to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send various authenticated requests to trigger this vulnerability.
CVE-2019-5141 An exploitable command injection vulnerability exists in the iw_webs functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted iw_serverip parameter can cause user input to be reflected in a subsequent iw_system call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.
CVE-2019-5140 An exploitable command injection vulnerability exists in the iwwebs functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted diagnostic script file name can cause user input to be reflected in a subsequent iwsystem call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.
CVE-2019-5138 An exploitable command injection vulnerability exists in encrypted diagnostic script functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted diagnostic script file can cause arbitrary busybox commands to be executed, resulting in remote control over the device. An attacker can send diagnostic while authenticated as a low privilege user to trigger this vulnerability.
CVE-2019-4288 IBM Maximo Anywhere 7.6.2.0, 7.6.2.1, 7.6.3.0, and 7.6.3.1 could disclose highly senstiive user information to an authenticated user with physical access to the device. IBM X-Force ID: 160631.
CVE-2019-4286 IBM Maximo Anywhere 7.6.2.0, 7.6.2.1, 7.6.3.0, and 7.6.3.1 could disclose highly senstiive user information to an authenticated user with physical access to the device. IBM X-Force ID: 160514.
CVE-2019-3948 The Amcrest IP2M-841B V2.520.AC00.18.R, Dahua IPC-XXBXX V2.622.0000000.9.R, Dahua IPC HX5X3X and HX4X3X V2.800.0000008.0.R, Dahua DH-IPC HX883X and DH-IPC-HX863X V2.622.0000000.7.R, Dahua DH-SD4XXXXX V2.623.0000000.7.R, Dahua DH-SD5XXXXX V2.623.0000000.1.R, Dahua DH-SD6XXXXX V2.640.0000000.2.R and V2.623.0000000.1.R, Dahua NVR5XX-4KS2 V3.216.0000006.0.R, Dahua NVR4XXX-4KS2 V3.216.0000006.0.R, and NVR2XXX-4KS2 do not require authentication to access the HTTP endpoint /videotalk. An unauthenticated, remote person can connect to this endpoint and potentionally listen to the audio of the capturing device.
CVE-2019-3931 Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 are vulnerable to argumention injection to the curl binary via crafted HTTP requests to return.cgi. A remote, authenticated attacker can use this vulnerability to upload files to the device and ultimately execute code as root.
CVE-2019-3920 The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to authenticated command injection via crafted HTTP request sent by a remote, authenticated attacker to /GponForm/device_Form?script/.
CVE-2019-3914 Remote command injection vulnerability in Verizon Fios Quantum Gateway (G1100) firmware version 02.01.00.05 allows a remote, authenticated attacker to execute arbitrary commands on the target device by adding an access control rule for a network object with a crafted hostname.
CVE-2019-3910 Crestron AM-100 before firmware version 1.6.0.2 contains an authentication bypass in the web interface's return.cgi script. Unauthenticated remote users can use the bypass to access some administrator functionality such as configuring update sources and rebooting the device.
CVE-2019-3770 Dell Wyse Management Suite versions prior to 1.4.1 contain a stored cross-site scripting vulnerability when unregistering a device. A remote authenticated malicious user with low privileges could exploit this vulnerability to store malicious HTML or JavaScript code. When victim users access the submitted data through their browsers, the malicious code gets executed by the web browser in the context of the vulnerable application.
CVE-2019-3769 Dell Wyse Management Suite versions prior to 1.4.1 contain a stored cross-site scripting vulnerability. A remote authenticated malicious user with low privileges could exploit this vulnerability to store malicious payload in the device heartbeat request. When victim users access the submitted data through their browsers, the malicious code gets executed by the web browser in the context of the vulnerable application.
CVE-2019-20489 An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.
CVE-2019-1984 A vulnerability in Cisco Enterprise Network Functions Virtualization Infrastructure Software (NFVIS) could allow an authenticated, remote attacker with administrator privileges to overwrite files on the underlying operating system (OS) of an affected device. The vulnerability is due to improper input validation in an NFVIS file-system command. An attacker could exploit this vulnerability by using crafted variables during the execution of an affected command. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying OS.
CVE-2019-19824 On certain TOTOLINK Realtek SDK based routers, an authenticated attacker may execute arbitrary OS commands via the sysCmd parameter to the boafrm/formSysCmd URI, even if the GUI (syscmd.htm) is not available. This allows for full control over the device's internals. This affects A3002RU through 2.0.0, A702R through 2.1.3, N301RT through 2.1.6, N302R through 3.4.0, N300RT through 3.4.0, N200RE through 4.0.0, N150RT through 3.4.0, and N100RE through 3.4.0.
CVE-2019-1974 A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to bypass user authentication and gain access as an administrative user. The vulnerability is due to insufficient request header validation during the authentication process. An attacker could exploit this vulnerability by sending a series of malicious requests to an affected device. An exploit could allow the attacker to gain full administrative access to the affected device.
CVE-2019-1973 A vulnerability in the web portal framework of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based interface. The vulnerability is due to improper input validation of log file content stored on the affected device. An attacker could exploit this vulnerability by modifying a log file with malicious code and getting a user to view the modified log file. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or to access sensitive, browser-based information.
CVE-2019-1966 A vulnerability in a specific CLI command within the local management (local-mgmt) context for Cisco UCS Fabric Interconnect Software could allow an authenticated, local attacker to gain elevated privileges as the root user on an affected device. The vulnerability is due to extraneous subcommand options present for a specific CLI command within the local-mgmt context. An attacker could exploit this vulnerability by authenticating to an affected device, entering the local-mgmt context, and issuing a specific CLI command and submitting user input. A successful exploit could allow the attacker to execute arbitrary operating system commands as root on an affected device. The attacker would need to have valid user credentials for the device.
CVE-2019-1965 A vulnerability in the Virtual Shell (VSH) session management for Cisco NX-OS Software could allow an authenticated, remote attacker to cause a VSH process to fail to delete upon termination. This can lead to a build-up of VSH processes that overtime can deplete system memory. When there is no system memory available, this can cause unexpected system behaviors and crashes. The vulnerability is due to the VSH process not being properly deleted when a remote management connection to the device is disconnected. An attacker could exploit this vulnerability by repeatedly performing a remote management connection to the device and terminating the connection in an unexpected manner. A successful exploit could allow the attacker to cause the VSH processes to fail to delete, which can lead to a system-wide denial of service (DoS) condition. The attacker must have valid user credentials to log in to the device using the remote management connection.
CVE-2019-1963 A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of Abstract Syntax Notation One (ASN.1)-encoded variables in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the SNMP daemon on the affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.
CVE-2019-1961 A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to read arbitrary files on the underlying operating system (OS) of an affected device. The vulnerability is due to the improper input validation of tar packages uploaded through the Web Portal to the Image Repository. An attacker could exploit this vulnerability by uploading a crafted tar package and viewing the log entries that are generated. A successful exploit could allow the attacker to read arbitrary files on the underlying OS.
CVE-2019-1960 Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to read arbitrary files on the underlying operating system (OS) of an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2019-19598 D-Link DAP-1860 devices before v1.04b03 Beta allow access to administrator functions without authentication via the HNAP_AUTH header timestamp value. In HTTP requests, part of the HNAP_AUTH header is the timestamp used to determine the time when the user sent the request. If this value is equal to the value stored in the device's /var/hnap/timestamp file, the request will pass the HNAP_AUTH check function.
CVE-2019-1959 Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to read arbitrary files on the underlying operating system (OS) of an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2019-19562 An authentication bypass in the debug interface in Mercedes-Benz HERMES 2.1 allows an attacker with physical access to device hardware to obtain system information.
CVE-2019-19560 An authentication bypass in the debug interface in Mercedes-Benz HERMES 1.5 allows an attacker with physical access to device hardware to obtain system information.
CVE-2019-1956 A vulnerability in the web-based interface of the Cisco SPA112 2-Port Phone Adapter could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against another user of the device. The vulnerability is due to insufficient validation of user-supplied input by the web-based interface of the affected device. An attacker could exploit this vulnerability by inserting malicious code in one of the configuration fields. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
CVE-2019-19556 An authentication bypass in the debug interface in Mercedes-Benz HERMES 1 allows an attacker with physical access to device hardware to obtain system information.
CVE-2019-1952 A vulnerability in the CLI of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to overwrite or read arbitrary files. The attacker would need valid administrator privilege-level credentials. This vulnerability is due to improper input validation of CLI command arguments. An attacker could exploit this vulnerability by using directory traversal techniques when executing a vulnerable command. A successful exploit could allow the attacker to overwrite or read arbitrary files on an affected device.
CVE-2019-1938 A vulnerability in the web-based management interface of Cisco UCS Director and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrator privileges on an affected system. The vulnerability is due to improper authentication request handling. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow an unprivileged attacker to access and execute arbitrary actions through certain APIs.
CVE-2019-1937 A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to acquire a valid session token with administrator privileges, bypassing user authentication. The vulnerability is due to insufficient request header validation during the authentication process. An attacker could exploit this vulnerability by sending a series of malicious requests to an affected device. An exploit could allow the attacker to use the acquired session token to gain full administrator access to the affected device.
CVE-2019-1936 A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an authenticated, remote attacker to execute arbitrary commands on the underlying Linux shell as the root user. Exploitation of this vulnerability requires privileged access to an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by logging in to the web-based management interface with administrator privileges and then sending a malicious request to a certain part of the interface.
CVE-2019-1934 A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to elevate privileges and execute administrative functions on an affected device. The vulnerability is due to insufficient authorization validation. An attacker could exploit this vulnerability by logging in to an affected device as a low-privileged user and then sending specific HTTPS requests to execute administrative functions using the information retrieved during initial login.
CVE-2019-19277 A vulnerability has been identified in SIPORT MP (All versions < 3.1.4). Vulnerable versions of the device allow the creation of special accounts ("service users") with administrative privileges that could enable a remote authenticated attacker to perform actions that are not visible to other users of the system, such as granting persons access to a secured area.
CVE-2019-1920 A vulnerability in the 802.11r Fast Transition (FT) implementation for Cisco IOS Access Points (APs) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected interface. The vulnerability is due to a lack of complete error handling condition for client authentication requests sent to a targeted interface configured for FT. An attacker could exploit this vulnerability by sending crafted authentication request traffic to the targeted interface, causing the device to restart unexpectedly.
CVE-2019-1912 A vulnerability in the web management interface of Cisco Small Business 220 Series Smart Switches could allow an unauthenticated, remote attacker to upload arbitrary files. The vulnerability is due to incomplete authorization checks in the web management interface. An attacker could exploit this vulnerability by sending a malicious request to certain parts of the web management interface. Depending on the configuration of the affected switch, the malicious request must be sent via HTTP or HTTPS. A successful exploit could allow the attacker to modify the configuration of an affected device or to inject a reverse shell. This vulnerability affects Cisco Small Business 220 Series Smart Switches running firmware versions prior to 1.1.4.4 with the web management interface enabled. The web management interface is enabled via both HTTP and HTTPS by default.
CVE-2019-1896 A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands and obtain root privileges. The vulnerability is due to insufficient validation of user-supplied input in the Certificate Signing Request (CSR) function of the web-based management interface. An attacker could exploit this vulnerability by submitting a crafted CSR in the web-based management interface. A successful exploit could allow an attacker with administrator privileges to execute arbitrary commands on the device with full root privileges.
CVE-2019-1895 A vulnerability in the Virtual Network Computing (VNC) console implementation of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to access the VNC console session of an administrative user on an affected device. The vulnerability is due to an insufficient authentication mechanism used to establish a VNC session. An attacker could exploit this vulnerability by intercepting an administrator VNC session request prior to login. A successful exploit could allow the attacker to watch the administrator console session or interact with it, allowing admin access to the affected device.
CVE-2019-1894 A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker with administrator privileges to overwrite or read arbitrary files on the underlying operating system (OS) of an affected device. The vulnerability is due to improper input validation in NFVIS filesystem commands. An attacker could exploit this vulnerability by using crafted variables during the execution of an affected command. A successful exploit could allow the attacker to overwrite or read arbitrary files on the underlying OS.
CVE-2019-1893 A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device as root. The vulnerability is due to insufficient input validation of a configuration file that is accessible to a local shell user. An attacker could exploit this vulnerability by including malicious input during the execution of this file. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS as root.
CVE-2019-1889 A vulnerability in the REST API for software device management in Cisco Application Policy Infrastructure Controller (APIC) Software could allow an authenticated, remote attacker to escalate privileges to root on an affected device. The vulnerability is due to incomplete validation and error checking for the file path when specific software is uploaded. An attacker could exploit this vulnerability by uploading malicious software using the REST API. A successful exploit could allow an attacker to escalate their privilege level to root. The attacker would need to have the administrator role on the device.
CVE-2019-1885 A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.
CVE-2019-1884 A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation mechanisms for certain fields in HTTP/HTTPS requests sent through an affected device. A successful attacker could exploit this vulnerability by sending a malicious HTTP/HTTPS request through an affected device. An exploit could allow the attacker to force the device to stop processing traffic, resulting in a DoS condition.
CVE-2019-1883 A vulnerability in the command-line interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker with read-only credentials to inject arbitrary commands that could allow them to obtain root privileges. The vulnerability is due to insufficient validation of user-supplied input on the command-line interface. An attacker could exploit this vulnerability by authenticating with read-only privileges via the CLI of an affected device and submitting crafted input to the affected commands. A successful exploit could allow an attacker to execute arbitrary commands on the device with root privileges.
CVE-2019-1880 A vulnerability in the BIOS upgrade utility of Cisco Unified Computing System (UCS) C-Series Rack Servers could allow an authenticated, local attacker to install compromised BIOS firmware on an affected device. The vulnerability is due to insufficient validation of the firmware image file. An attacker could exploit this vulnerability by executing the BIOS upgrade utility with a specific set of options. A successful exploit could allow the attacker to bypass the firmware signature-verification process and install compromised BIOS firmware on an affected device.
CVE-2019-1879 A vulnerability in the CLI of Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient validation of user-supplied input at the CLI. An attacker could exploit this vulnerability by authenticating with the administrator password via the CLI of an affected device and submitting crafted input to the affected commands. A successful exploit could allow the attacker to execute arbitrary commands on the device with root privileges.
CVE-2019-1871 A vulnerability in the Import Cisco IMC configuration utility of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition and implement arbitrary commands with root privileges on an affected device. The vulnerability is due to improper bounds checking by the import-config process. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to implement arbitrary code on the affected device with elevated privileges.
CVE-2019-18661 Fastweb FASTGate 1.0.1b devices allow partial authentication bypass by changing a certain check_pwd return value from 0 to 1. An attack does not achieve administrative control of a device; however, the attacker can view all of the web pages of the administration console.
CVE-2019-1865 A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by invoking an interface monitoring mechanism with a crafted argument on the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.
CVE-2019-1864 A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on an affected device. The vulnerability is due to insufficient validation of command input by the affected software. An attacker could exploit this vulnerability by sending malicious commands to the web-based management interface of the affected software. A successful exploit could allow the attacker, with read-only privileges, to inject and execute arbitrary, system-level commands with root privileges on an affected device.
CVE-2019-1862 A vulnerability in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying a crafted input parameter on a form in the Web UI and then submitting that form. A successful exploit could allow the attacker to run arbitrary commands on the device with root privileges, which may lead to complete system compromise.
CVE-2019-1859 A vulnerability in the Secure Shell (SSH) authentication process of Cisco Small Business Switches software could allow an attacker to bypass client-side certificate authentication and revert to password authentication. The vulnerability exists because OpenSSH mishandles the authentication process. An attacker could exploit this vulnerability by attempting to connect to the device via SSH. A successful exploit could allow the attacker to access the configuration as an administrative user if the default credentials are not changed. There are no workarounds available; however, if client-side certificate authentication is enabled, disable it and use strong password authentication. Client-side certificate authentication is disabled by default.
CVE-2019-1854 A vulnerability in the management web interface of Cisco Expressway Series could allow an authenticated, remote attacker to perform a directory traversal attack against an affected device. The vulnerability is due to insufficient input validation on the web interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface. A successful exploit could allow the attacker to bypass security restrictions and access the web interface of a Cisco Unified Communications Manager associated with the affected device. Valid credentials would still be required to access the Cisco Unified Communications Manager interface.
CVE-2019-1850 A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on an affected device. An attacker would need to have valid administrator credentials on the device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker with elevated privileges could exploit this vulnerability by sending crafted commands to the administrative web management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.
CVE-2019-1848 A vulnerability in Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, adjacent attacker to bypass authentication and access critical internal services. The vulnerability is due to insufficient access restriction to ports necessary for system operation. An attacker could exploit this vulnerability by connecting an unauthorized network device to the subnet designated for cluster services. A successful exploit could allow an attacker to reach internal services that are not hardened for external access.
CVE-2019-1842 A vulnerability in the Secure Shell (SSH) authentication function of Cisco IOS XR Software could allow an authenticated, remote attacker to successfully log in to an affected device using two distinct usernames. The vulnerability is due to a logic error that may occur when certain sequences of actions are processed during an SSH login event on the affected device. An attacker could exploit this vulnerability by initiating an SSH session to the device with a specific sequence that presents the two usernames. A successful exploit could result in logging data misrepresentation, user enumeration, or, in certain circumstances, a command authorization bypass. See the Details section for more information.
CVE-2019-1839 A vulnerability in Cisco Remote PHY Device Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying various CLI commands with crafted arguments. A successful exploit could allow the attacker to run arbitrary commands as the root user, allowing complete compromise of the system.
CVE-2019-1838 A vulnerability in the web-based management interface of Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. This vulnerability has been fixed in software version 14.1(1i).
CVE-2019-18376 A CSRF token disclosure vulnerability allows a remote attacker, with access to an authenticated Management Center (MC) user's web browser history or a network device that intercepts/logs traffic to MC, to obtain CSRF tokens and use them to perform CSRF attacks against MC.
CVE-2019-1836 A vulnerability in the system shell for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to use symbolic links to overwrite system files. These system files may be sensitive and should not be overwritable by non-root users. The attacker would need valid device credentials. The vulnerability is due to incorrect symbolic link verification of directory paths when they are used in the system shell. An attacker could exploit this vulnerability by authenticating to the device and providing crafted user input to specific symbolic link CLI commands. Successful exploitation could allow the attacker to overwrite system files that should be restricted. This vulnerability has been fixed in software version 14.1(1i).
CVE-2019-1835 A vulnerability in the CLI of Cisco Aironet Access Points (APs) could allow an authenticated, local attacker to access sensitive information stored in an AP. The vulnerability is due to improper sanitization of user-supplied input in specific CLI commands. An attacker could exploit this vulnerability by accessing the CLI of an affected AP with administrator privileges and issuing crafted commands that result in directory traversal. A successful exploit could allow the attacker to view system files on the affected device, which could contain sensitive information. Software versions 8.8 and 8.9 are affected.
CVE-2019-18336 A vulnerability has been identified in SIMATIC S7-300 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions < V3.X.17), SIMATIC TDC CP51M1 (All versions < V1.1.8), SIMATIC TDC CPU555 (All versions < V1.1.1), SINUMERIK 840D sl (All versions < V4.8.6), SINUMERIK 840D sl (All versions < V4.94). Specially crafted packets sent to port 102/tcp (Profinet) could cause the affected device to go into defect mode. A restart is required in order to recover the system. Successful exploitation requires an attacker to have network access to port 102/tcp, with no authentication. No user interation is required. At the time of advisory publication no public exploitation of this security vulnerability was known.
CVE-2019-1830 A vulnerability in Locally Significant Certificate (LSC) management for the Cisco Wireless LAN Controller (WLC) could allow an authenticated, remote attacker to cause the device to unexpectedly restart, which causes a denial of service (DoS) condition. The attacker would need to have valid administrator credentials. The vulnerability is due to incorrect input validation of the HTTP URL used to establish a connection to the LSC Certificate Authority (CA). An attacker could exploit this vulnerability by authenticating to the targeted device and configuring a LSC certificate. An exploit could allow the attacker to cause a DoS condition due to an unexpected restart of the device.
CVE-2019-1829 A vulnerability in the CLI of Cisco Aironet Series Access Points (APs) could allow an authenticated, local attacker to gain access to the underlying Linux operating system (OS) without the proper authentication. The attacker would need valid administrator device credentials. The vulnerability is due to improper validation of user-supplied input for certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input for a CLI command. A successful exploit could allow the attacker to obtain access to the underlying Linux OS without proper authentication.
CVE-2019-1826 A vulnerability in the quality of service (QoS) feature of Cisco Aironet Series Access Points (APs) could allow an authenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation on QoS fields within Wi-Fi frames by the affected device. An attacker could exploit this vulnerability by sending malformed Wi-Fi frames to an affected device. A successful exploit could allow the attacker to cause the affected device to crash, resulting in a DoS condition.
CVE-2019-18256 BIOTRONIK CardioMessenger II, The affected products use individual per-device credentials that are stored in a recoverable format. An attacker with physical access to the CardioMessenger can use these credentials for network authentication and decryption of local data in transit.
CVE-2019-18250 In all versions of ABB Power Generation Information Manager (PGIM) and Plant Connect, the affected product is vulnerable to authentication bypass, which may allow an attacker to remotely bypass authentication and extract credentials from the affected device.
CVE-2019-1816 A vulnerability in the log subscription subsystem of the Cisco Web Security Appliance (WSA) could allow an authenticated, local attacker to perform command injection and elevate privileges to root. The vulnerability is due to insufficient validation of user-supplied input on the web and command-line interface. An attacker could exploit this vulnerability by authenticating to the affected device and injecting scripting commands in the scope of the log subscription subsystem. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system and elevate privileges to root.
CVE-2019-1813 A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device.
CVE-2019-1812 A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device.
CVE-2019-1811 A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device.
CVE-2019-1810 A vulnerability in the Image Signature Verification feature used in an NX-OS CLI command in Cisco Nexus 3000 Series and 9000 Series Switches could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device. Note: If the device has not been patched for the vulnerability previously disclosed in the Cisco Security Advisory cisco-sa-20190306-nxos-sig-verif, a successful exploit could allow the attacker to boot a malicious software image.
CVE-2019-1809 A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software patch on an affected device. The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by crafting an unsigned software patch to bypass signature checks and loading it on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.
CVE-2019-1808 A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software patch on an affected device. The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by loading an unsigned software patch on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.
CVE-2019-1806 A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco Small Business Sx200, Sx300, Sx500, ESW2 Series Managed Switches and Small Business Sx250, Sx350, Sx550 Series Switches could allow an authenticated, remote attacker to cause the SNMP application of an affected device to cease processing traffic, resulting in the CPU utilization reaching one hundred percent. Manual intervention may be required before a device resumes normal operations. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a malicious SNMP packet to an affected device. A successful exploit could allow the attacker to cause the device to cease forwarding traffic, which could result in a denial of service (DoS) condition. Cisco has released firmware updates that address this vulnerability.
CVE-2019-1803 A vulnerability in the filesystem management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an authenticated, local attacker with administrator rights to gain elevated privileges as the root user on an affected device. The vulnerability is due to overly permissive file permissions of specific system files. An attacker could exploit this vulnerability by authenticating to an affected device, creating a crafted command string, and writing this crafted string to a specific file location. A successful exploit could allow the attacker to execute arbitrary operating system commands as root on an affected device. The attacker would need to have valid administrator credentials for the device.
CVE-2019-1795 A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2019-1791 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2019-1790 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with valid administrator credentials to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2019-1784 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2019-1783 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2019-1782 A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability.
CVE-2019-1781 A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability.
CVE-2019-1780 A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying operating system of an affected device with elevated privileges. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. NX-OS versions prior to 8.3(1) are affected. NX-OS versions prior to 8.3(1) are affected.
CVE-2019-1779 A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device with elevated privileges. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid device credentials to exploit this vulnerability.
CVE-2019-1778 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2019-1776 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2019-1775 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2019-1774 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2019-1770 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2019-1769 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system of an attached line card with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of an attached line card with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2019-1768 A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities.
CVE-2019-1767 A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities. NX-OS versions prior to 8.3(1) are affected.
CVE-2019-17651 An Improper Neutralization of Input vulnerability in the description and title parameters of a Device Maintenance Schedule in FortiSIEM version 5.2.5 and below may allow a remote authenticated attacker to perform a Stored Cross Site Scripting attack (XSS) by injecting malicious JavaScript code into the description field of a Device Maintenance schedule.
CVE-2019-1765 A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 8800 Series could allow an authenticated, remote attacker to write arbitrary files to the filesystem. The vulnerability is due to insufficient input validation and file-level permissions. An attacker could exploit this vulnerability by uploading invalid files to an affected device. A successful exploit could allow the attacker to write files in arbitrary locations on the filesystem. This vulnerability affects Cisco IP Phone 8800 Series products running a SIP Software release prior to 11.0(5) for Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 for the IP Conference Phone 8832 and the rest of the IP Phone 8800 Series.
CVE-2019-1764 A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack. The vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform arbitrary actions on a targeted device via a web browser and with the privileges of the user. This vulnerability affects Cisco IP Phone 8800 Series products running a SIP Software release prior to 11.0(5) for Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 for the IP Conference Phone 8832 and the rest of the IP Phone 8800 Series. Cisco IP Conference Phone 8831 is not affected.
CVE-2019-1762 A vulnerability in the Secure Storage feature of Cisco IOS and IOS XE Software could allow an authenticated, local attacker to access sensitive system information on an affected device. The vulnerability is due to improper memory operations performed at encryption time, when affected software handles configuration updates. An attacker could exploit this vulnerability by retrieving the contents of specific memory locations of an affected device. A successful exploit could result in the disclosure of keying materials that are part of the device configuration, which can be used to recover critical system information.
CVE-2019-1756 A vulnerability in Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying a username with a malicious payload in the web UI and subsequently making a request to a specific endpoint in the web UI. A successful exploit could allow the attacker to run arbitrary commands as the root user, allowing complete compromise of the system.
CVE-2019-1755 A vulnerability in the Web Services Management Agent (WSMA) function of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary Cisco IOS commands as a privilege level 15 user. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker could exploit this vulnerability by submitting crafted HTTP requests to the targeted application. A successful exploit could allow the attacker to execute arbitrary commands on the affected device.
CVE-2019-1754 A vulnerability in the authorization subsystem of Cisco IOS XE Software could allow an authenticated but unprivileged (level 1), remote attacker to run privileged Cisco IOS commands by using the web UI. The vulnerability is due to improper validation of user privileges of web UI users. An attacker could exploit this vulnerability by submitting a malicious payload to a specific endpoint in the web UI. A successful exploit could allow the lower-privileged attacker to execute arbitrary commands with higher privileges on the affected device.
CVE-2019-1753 A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated but unprivileged (level 1), remote attacker to run privileged Cisco IOS commands by using the web UI. The vulnerability is due to a failure to validate and sanitize input in Web Services Management Agent (WSMA) functions. An attacker could exploit this vulnerability by submitting a malicious payload to the affected device's web UI. A successful exploit could allow the lower-privileged attacker to execute arbitrary commands with higher privileges on the affected device.
CVE-2019-1745 A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with elevated privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected commands. An exploit could allow the attacker to gain root privileges on the affected device.
CVE-2019-1743 A vulnerability in the web UI framework of Cisco IOS XE Software could allow an authenticated, remote attacker to make unauthorized changes to the filesystem of the affected device. The vulnerability is due to improper input validation. An attacker could exploit this vulnerability by crafting a malicious file and uploading it to the device. An exploit could allow the attacker to gain elevated privileges on the affected device.
CVE-2019-1736 A vulnerability in the firmware of the Cisco UCS C-Series Rack Servers could allow an authenticated, physical attacker to bypass Unified Extensible Firmware Interface (UEFI) Secure Boot validation checks and load a compromised software image on an affected device. The vulnerability is due to improper validation of the server firmware upgrade images. An attacker could exploit this vulnerability by installing a server firmware version that would allow the attacker to disable UEFI Secure Boot. A successful exploit could allow the attacker to bypass the signature validation checks that are done by UEFI Secure Boot technology and load a compromised software image on the affected device. A compromised software image is any software image that has not been digitally signed by Cisco.
CVE-2019-1735 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid user credentials to exploit this vulnerability.
CVE-2019-1734 A vulnerability in the implementation of a CLI diagnostic command in Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to view sensitive system files that should be restricted. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to incomplete role-based access control (RBAC) verification. An attacker could exploit this vulnerability by authenticating to the device and issuing a specific CLI diagnostic command with crafted user-input parameters. An exploit could allow the attacker to perform an arbitrary read of a file on the device, and the file may contain sensitive information. The attacker needs valid device credentials to exploit this vulnerability.
CVE-2019-1733 A vulnerability in the NX API (NX-API) Sandbox interface for Cisco NX-OS Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the NX-API Sandbox interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the NX-API Sandbox interface. An attacker could exploit this vulnerability by persuading a user of the NX-API Sandbox interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected NX-API Sandbox interface.
CVE-2019-1732 A vulnerability in the Remote Package Manager (RPM) subsystem of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to leverage a time-of-check, time-of-use (TOCTOU) race condition to corrupt local variables, which could lead to arbitrary command injection. The vulnerability is due to the lack of a proper locking mechanism on critical variables that need to stay static until used. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a set of RPM-related CLI commands. A successful exploit could allow the attacker to perform arbitrary command injection. The attacker would need administrator credentials for the targeted device.
CVE-2019-1731 A vulnerability in the SSH CLI key management functionality of Cisco NX-OS Software could allow an authenticated, local attacker to expose a user's private SSH key to all authenticated users on the targeted device. The attacker must authenticate with valid administrator device credentials. The vulnerability is due to incomplete error handling if a specific error type occurs during the SSH key export. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the CLI. A successful exploit could allow the attacker to expose a user's private SSH key. In addition, a similar type of error in the SSH key import could cause the passphrase-protected private SSH key to be imported unintentionally.
CVE-2019-1730 A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to bypass the limited command set of the restricted Guest Shell and execute commands at the privilege level of a network-admin user outside of the Guest Shell. The attacker must authenticate with valid administrator device credentials. The vulnerability is due to the incorrect implementation of a CLI command that allows a Bash command to be incorrectly invoked on the Guest Shell CLI. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Guest Shell prompt. A successful exploit could allow the attacker to issue commands that should be restricted by a Guest Shell account.
CVE-2019-1729 A vulnerability in the CLI implementation of a specific command used for image maintenance for Cisco NX-OS Software could allow an authenticated, local attacker to overwrite any file on the file system including system files. These file overwrites by the attacker are accomplished at the root privilege level. The vulnerability occurs because there is no verification of user-input parameters and or digital-signature verification for image files when using a specific CLI command. An attacker could exploit this vulnerability by authenticating to the device and issuing a command at the CLI. Because an exploit could allow the attacker to overwrite any file on the disk, including system files, a denial of service (DoS) condition could occur. The attacker must have valid administrator credentials for the affected device to exploit this vulnerability.
CVE-2019-1728 A vulnerability in the Secure Configuration Validation functionality of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to run arbitrary commands at system boot time with the privileges of root. The vulnerability is due to a lack of proper validation of system files when the persistent configuration information is read from the file system. An attacker could exploit this vulnerability by authenticating to the device and overwriting the persistent configuration storage with malicious executable files. An exploit could allow the attacker to run arbitrary commands at system startup and those commands will run as the root user. The attacker must have valid administrative credentials for the device.
CVE-2019-1727 A vulnerability in the Python scripting subsystem of Cisco NX-OS Software could allow an authenticated, local attacker to escape the Python parser and issue arbitrary commands to elevate the attacker's privilege level. The vulnerability is due to insufficient sanitization of user-supplied parameters that are passed to certain Python functions in the scripting sandbox of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands to elevate the attacker's privilege level. To exploit this vulnerability, the attacker must have local access and be authenticated to the targeted device with administrative or Python execution privileges. These requirements could limit the possibility of a successful exploit.
CVE-2019-1726 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to access internal services that should be restricted on an affected device, such as the NX-API. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument to the affected command. A successful exploit could allow the attacker to bypass intended restrictions and access internal services of the device. An attacker would need valid device credentials to exploit this vulnerability.
CVE-2019-1725 A vulnerability in the local management CLI implementation for specific commands on the Cisco UCS B-Series Blade Servers could allow an authenticated, local attacker to overwrite an arbitrary file on disk. It is also possible the attacker could inject CLI command parameters that should not be allowed for a specific subset of local management CLI commands. The vulnerability is due to lack of proper input validation of user input for local management CLI commands. An attacker could exploit this vulnerability by authenticating to the device and issuing a crafted form of a limited subset of local management CLI commands. An exploit could allow the attacker to overwrite an arbitrary files on disk or inject CLI command parameters that should have been disabled. This vulnerability is fixed in software version 4.0(2a) and later.
CVE-2019-17219 An issue was discovered on V-Zug Combi-Steam MSLQ devices before Ethernet R07 and before WLAN R05. By default, the device does not enforce any authentication. An adjacent attacker is able to use the network interface without proper access control.
CVE-2019-17215 An issue was discovered on V-Zug Combi-Steam MSLQ devices before Ethernet R07 and before WLAN R05. There is no bruteforce protection (e.g., lockout) established. An attacker might be able to bruteforce the password to authenticate on the device.
CVE-2019-1721 A vulnerability in the phone book feature of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to cause the CPU to increase to 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to improper handling of the XML input. An attacker could exploit this vulnerability by sending a Session Initiation Protocol (SIP) message with a crafted XML payload to an affected device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition. Manual intervention may be required to recover the device. This vulnerability is fixed in Cisco Expressway Series and Cisco TelePresence Video Communication Server Releases X12.5.1 and later.
CVE-2019-1716 A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 7800 Series and Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code. The vulnerability exists because the software improperly validates user-supplied input during user authentication. An attacker could exploit this vulnerability by connecting to an affected device using HTTP and supplying malicious user credentials. A successful exploit could allow the attacker to trigger a reload of an affected device, resulting in a DoS condition, or to execute arbitrary code with the privileges of the app user. Cisco fixed this vulnerability in the following SIP Software releases: 10.3(1)SR5 and later for Cisco Unified IP Conference Phone 8831; 11.0(4)SR3 and later for Cisco Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 and later for the rest of the Cisco IP Phone 7800 Series and 8800 Series.
CVE-2019-1714 A vulnerability in the implementation of Security Assertion Markup Language (SAML) 2.0 Single Sign-On (SSO) for Clientless SSL VPN (WebVPN) and AnyConnect Remote Access VPN in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to successfully establish a VPN session to an affected device. The vulnerability is due to improper credential management when using NT LAN Manager (NTLM) or basic authentication. An attacker could exploit this vulnerability by opening a VPN session to an affected device after another VPN user has successfully authenticated to the affected device via SAML SSO. A successful exploit could allow the attacker to connect to secured networks behind the affected device.
CVE-2019-1707 A vulnerability in the web-based management interface of Cisco DNA Center could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco DNA Center versions prior to 1.2.5 are affected.
CVE-2019-1701 Multiple vulnerabilities in the WebVPN service of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the WebVPN portal of an affected device. The vulnerabilities exist because the software insufficiently validates user-supplied input on an affected device. An attacker could exploit these vulnerabilities by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive browser-based information. An attacker would need administrator privileges on the device to exploit these vulnerabilities.
CVE-2019-1693 A vulnerability in the WebVPN service of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper management of authenticated sessions in the WebVPN portal. An attacker could exploit this vulnerability by authenticating with valid credentials and accessing a specific URL in the WebVPN portal. A successful exploit could allow the attacker to cause the device to reload, resulting in a temporary DoS condition.
CVE-2019-1682 A vulnerability in the FUSE filesystem functionality for Cisco Application Policy Infrastructure Controller (APIC) software could allow an authenticated, local attacker to escalate privileges to root on an affected device. The vulnerability is due to insufficient input validation for certain command strings issued on the CLI of the affected device. An attacker with write permissions for files within a readable folder on the device could alter certain definitions in the affected file. A successful exploit could allow an attacker to cause the underlying FUSE driver to execute said crafted commands, elevating the attacker's privileges to root on an affected device.
CVE-2019-16671 An issue was discovered on Weidmueller IE-SW-VL05M 3.6.6 Build 16102415, IE-SW-VL08MT 3.5.2 Build 16102415, and IE-SW-PL10M 3.3.16 Build 16102416 devices. Remote authenticated users can crash a device with a special packet because of Uncontrolled Resource Consumption.
CVE-2019-1660 A vulnerability in the Simple Object Access Protocol (SOAP) of Cisco TelePresence Management Suite (TMS) software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to a lack of proper access and authentication controls on the affected TMS software. An attacker could exploit this vulnerability by gaining access to internal, trusted networks to send crafted SOAP calls to the affected device. If successful, an exploit could allow the attacker to access system management tools. Under normal circumstances, this access should be prohibited.
CVE-2019-1657 A vulnerability in Cisco AMP Threat Grid could allow an authenticated, remote attacker to access sensitive information. The vulnerability is due to unsafe creation of API keys. An attacker could exploit this vulnerability by using insecure credentials to gain unauthorized access to the affected device. An exploit could allow the attacker to gain unauthorized access to information by using the API key credentials.
CVE-2019-1656 A vulnerability in the CLI of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to access the shell of the underlying Linux operating system on the affected device. The vulnerability is due to improper input validation in the affected software. An attacker could exploit this vulnerability by sending crafted commands to the affected device. An exploit could allow the attacker to gain shell access with a nonroot user account to the underlying Linux operating system on the affected device and potentially access system configuration files with sensitive information. This vulnerability only affects console connections from CIMC. It does not apply to remote connections, such as telnet or SSH.
CVE-2019-1654 A vulnerability in the development shell (devshell) authentication for Cisco Aironet Series Access Points (APs) running the Cisco AP-COS operating system could allow an authenticated, local attacker to access the development shell without proper authentication, which allows for root access to the underlying Linux OS. The attacker would need valid device credentials. The vulnerability exists because the software improperly validates user-supplied input at the CLI authentication prompt for development shell access. An attacker could exploit this vulnerability by authenticating to the device and entering crafted input at the CLI. A successful exploit could allow the attacker to access the AP development shell without proper authentication, which allows for root access to the underlying Linux OS. Software versions prior to 8.3.150.0, 8.5.135.0, and 8.8.100.0 are affected.
CVE-2019-1652 A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker with administrative privileges on an affected device to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious HTTP POST requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux shell as root. Cisco has released firmware updates that address this vulnerability.
CVE-2019-1650 A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the save command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the save command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user.
CVE-2019-1649 A vulnerability in the logic that handles access control to one of the hardware components in Cisco's proprietary Secure Boot implementation could allow an authenticated, local attacker to write a modified firmware image to the component. This vulnerability affects multiple Cisco products that support hardware-based Secure Boot functionality. The vulnerability is due to an improper check on the area of code that manages on-premise updates to a Field Programmable Gate Array (FPGA) part of the Secure Boot hardware implementation. An attacker with elevated privileges and access to the underlying operating system that is running on the affected device could exploit this vulnerability by writing a modified firmware image to the FPGA. A successful exploit could either cause the device to become unusable (and require a hardware replacement) or allow tampering with the Secure Boot verification process, which under some circumstances may allow the attacker to install and boot a malicious software image. An attacker will need to fulfill all the following conditions to attempt to exploit this vulnerability: Have privileged administrative access to the device. Be able to access the underlying operating system running on the device; this can be achieved either by using a supported, documented mechanism or by exploiting another vulnerability that would provide an attacker with such access. Develop or have access to a platform-specific exploit. An attacker attempting to exploit this vulnerability across multiple affected platforms would need to research each one of those platforms and then develop a platform-specific exploit. Although the research process could be reused across different platforms, an exploit developed for a given hardware platform is unlikely to work on a different hardware platform.
CVE-2019-1648 A vulnerability in the user group configuration of the Cisco SD-WAN Solution could allow an authenticated, local attacker to gain elevated privileges on an affected device. The vulnerability is due to a failure to properly validate certain parameters included within the group configuration. An attacker could exploit this vulnerability by writing a crafted file to the directory where the user group configuration is located in the underlying operating system. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device.
CVE-2019-1646 A vulnerability in the local CLI of the Cisco SD-WAN Solution could allow an authenticated, local attacker to escalate privileges and modify device configuration files. The vulnerability exists because user input is not properly sanitized for certain commands at the CLI. An attacker could exploit this vulnerability by sending crafted commands to the CLI of an affected device. A successful exploit could allow the attacker to establish an interactive session with elevated privileges. The attacker could then use the elevated privileges to further compromise the device or obtain additional configuration data from the device.
CVE-2019-1634 A vulnerability in the Intelligent Platform Management Interface (IPMI) of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of user-supplied commands. An attacker who has administrator privileges and access to the network where the IPMI resides could exploit this vulnerability by submitting crafted input to the affected commands. A successful exploit could allow the attacker to gain root privileges on the affected device.
CVE-2019-1632 A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected device. The vulnerability is due to insufficient CSRF protections for the web-based management interface of the affected device. An attacker could exploit this vulnerability by persuading a user to follow a malicious link. A successful exploit could allow the attacker to use a web browser and the privileges of the user to perform arbitrary actions on the affected device.
CVE-2019-1628 A vulnerability in the web server of Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker to cause a buffer overflow, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect bounds checking. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected system. An exploit could allow the attacker to cause a buffer overflow, resulting in a process crash and DoS condition on the device.
CVE-2019-1626 A vulnerability in the vManage web-based UI (Web UI) of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to gain elevated privileges on an affected vManage device. The vulnerability is due to a failure to properly authorize certain user actions in the device configuration. An attacker could exploit this vulnerability by logging in to the vManage Web UI and sending crafted HTTP requests to vManage. A successful exploit could allow attackers to gain elevated privileges and make changes to the configuration that they would not normally be authorized to make.
CVE-2019-1625 A vulnerability in the CLI of Cisco SD-WAN Solution could allow an authenticated, local attacker to elevate lower-level privileges to the root user on an affected device. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. A successful exploit could allow the attacker to make configuration changes to the system as the root user.
CVE-2019-1624 A vulnerability in the vManage web-based UI (Web UI) in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the vManage Web UI. A successful exploit could allow the attacker to execute commands with root privileges.
CVE-2019-16213 Tenda PA6 Wi-Fi Powerline extender 1.0.1.21 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially crafted string, an attacker could modify the device name of an attached PLC adapter to inject and execute arbitrary commands on the system with root privileges.
CVE-2019-1619 A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper session management on affected DCNM software. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.
CVE-2019-1615 A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability is due to improper verification of digital signatures for software images. An attacker could exploit this vulnerability by loading an unsigned software image on an affected device. A successful exploit could allow the attacker to boot a malicious software image. Note: The fix for this vulnerability requires a BIOS upgrade as part of the software upgrade. For additional information, see the Details section of this advisory. Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I7(5). Nexus 9000 Series Fabric Switches in ACI Mode are affected running software versions prior to 13.2(1l). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I7(5). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5).
CVE-2019-1613 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. MDS 9000 Series Multilayer Switches are affected running software versions prior to 6.2(27) and 8.2(3). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(6). Nexus 3500 Platform Switches are affected running software versions prior to 6.0(2)A8(11) and 7.0(3)I7(6). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9), 7.0(3)I7(6). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5). Nexus 7000 and 7700 Series Switches are affected running software versions prior to 6.2(22) and 8.2(3).
CVE-2019-1612 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches in Stand are affected running software versions prior to 7.0(3)F3(5).
CVE-2019-1611 A vulnerability in the CLI of Cisco NX-OS Software and Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. Firepower 4100 Series Next-Generation Firewalls are affected running software versions prior to 2.2.2.91, 2.3.1.110, and 2.4.1.222. Firepower 9300 Security Appliance are affected running software versions prior to 2.2.2.91, 2.3.1.110, and 2.4.1.222. MDS 9000 Series Multilayer Switches are affected running software versions prior to 6.2(25) and 8.3(1). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(5). Nexus 3500 Platform Switches are affected running software versions prior to 7.0(3)I7(5). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected running software versions prior to 7.1(5)N1(1b) and 7.3(4)N1(1). Nexus 7000 and 7700 Series Switches are affected running software versions prior to 6.2(22), 7.3(3)D1(1), 8.2(3). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(5). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5).
CVE-2019-1610 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. Nexus 3500 Platform Switches and Nexus 3000 Series Switches software versions prior to 7.0(3)I7(4) are affected.
CVE-2019-1609 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(27), 8.1(1b), and 8.3(2). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(6). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(6). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), 8.2(3), and 8.3(2). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I4(9) and7.0(3)I7(6). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).
CVE-2019-1608 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(27), 8.1(1b), and 8.3(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3).
CVE-2019-1607 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3).
CVE-2019-1606 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid user credentials to exploit this vulnerability. Nexus 3000, 3500, and Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(4).
CVE-2019-1605 A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary code as root. The vulnerability is due to incorrect input validation in the NX-API feature. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS request to an internal service on an affected device that has the NX-API feature enabled. A successful exploit could allow the attacker to cause a buffer overflow and execute arbitrary code as root. Note: The NX-API feature is disabled by default. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.1(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(8) and 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(8). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.3(2)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 7.3(3)D1(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I4(8) and 7.0(3)I7(1). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).
CVE-2019-1604 A vulnerability in the user account management interface of Cisco NX-OS Software could allow an authenticated, local attacker to gain elevated privileges on an affected device. The vulnerability is due to an incorrect authorization check of user accounts and their associated Group ID (GID). An attacker could exploit this vulnerability by taking advantage of a logic error that will permit the use of higher privileged commands than what is necessarily assigned. A successful exploit could allow an attacker to execute commands with elevated privileges on the underlying Linux shell of an affected device. Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 8.2(3), and 8.3(2). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).
CVE-2019-1603 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to escalate lower-level privileges to the administrator level. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. A successful exploit could allow an attacker to make configuration changes to the system as administrator. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).
CVE-2019-16028 A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper handling of Lightweight Directory Access Protocol (LDAP) authentication responses from an external authentication server. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to gain administrative access to the web-based management interface of the affected device.
CVE-2019-16027 A vulnerability in the implementation of the Intermediate System&ndash;to&ndash;Intermediate System (IS&ndash;IS) routing protocol functionality in Cisco IOS XR Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition in the IS&ndash;IS process. The vulnerability is due to improper handling of a Simple Network Management Protocol (SNMP) request for specific Object Identifiers (OIDs) by the IS&ndash;IS process. An attacker could exploit this vulnerability by sending a crafted SNMP request to the affected device. A successful exploit could allow the attacker to cause a DoS condition in the IS&ndash;IS process.
CVE-2019-1602 A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to access sensitive data that could be used to elevate their privileges to administrator. The vulnerability is due to improper implementation of filesystem permissions. An attacker could exploit this vulnerability by logging in to the CLI of an affected device, accessing a specific file, and leveraging this information to authenticate to the NX-API server. A successful exploit could allow an attacker to make configuration changes as administrator. Note: NX-API is disabled by default. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).
CVE-2019-16011 A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.
CVE-2019-1601 A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to gain read and write access to a critical configuration file. The vulnerability is due to a failure to impose strict filesystem permissions on the targeted device. An attacker could exploit this vulnerability by accessing and modifying restricted files. A successful exploit could allow an attacker to use the content of this configuration file to bypass authentication and log in as any user of the device. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(25), 8.1(1b), and 8.3(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(3)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).
CVE-2019-16004 A vulnerability in the REST API endpoint of Cisco Vision Dynamic Signage Director could allow an unauthenticated, remote attacker to bypass authentication on an affected device. The vulnerability is due to missing authentication on some of the API calls. An attacker could exploit this vulnerability by sending a request to one of the affected calls. A successful exploit could allow the attacker to interact with some parts of the API.
CVE-2019-16003 A vulnerability in the web-based management interface of Cisco UCS Director could allow an unauthenticated, remote attacker to download system log files from an affected device. The vulnerability is due to an issue in the authentication logic of the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web interface. A successful exploit could allow the attacker to download log files if they were previously generated by an administrator.
CVE-2019-16000 A vulnerability in the automatic update process of Cisco Umbrella Roaming Client for Windows could allow an authenticated, local attacker to install arbitrary, unapproved applications on a targeted device. The vulnerability is due to insufficient verification of the Windows Installer. An attacker could exploit this vulnerability by placing a file in a specific location in the Windows file system. A successful exploit could allow the attacker to bypass configured policy and install unapproved applications.
CVE-2019-15999 A vulnerability in the application environment of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to gain unauthorized access to the JBoss Enterprise Application Platform (JBoss EAP) on an affected device. The vulnerability is due to an incorrect configuration of the authentication settings on the JBoss EAP. An attacker could exploit this vulnerability by authenticating with a specific low-privilege account. A successful exploit could allow the attacker to gain unauthorized access to the JBoss EAP, which should be limited to internal system accounts.
CVE-2019-15993 A vulnerability in the web UI of Cisco Small Business Switches could allow an unauthenticated, remote attacker to access sensitive device information. The vulnerability exists because the software lacks proper authentication controls to information accessible from the web UI. An attacker could exploit this vulnerability by sending a malicious HTTP request to the web UI of an affected device. A successful exploit could allow the attacker to access sensitive device information, which includes configuration files.
CVE-2019-15992 A vulnerability in the implementation of the Lua interpreter integrated in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to execute arbitrary code with root privileges on the underlying Linux operating system of an affected device. The vulnerability is due to insufficient restrictions on the allowed Lua function calls within the context of user-supplied Lua scripts. A successful exploit could allow the attacker to trigger a heap overflow condition and execute arbitrary code with root privileges on the underlying Linux operating system of an affected device.
CVE-2019-15990 A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an unauthenticated, remote attacker to view information displayed in the web-based management interface. The vulnerability is due to improper authorization of HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to view information displayed in the web-based management interface without authentication.
CVE-2019-15985 Multiple vulnerabilities in the REST and SOAP API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to execute arbitrary SQL commands on an affected device. To exploit these vulnerabilities, an attacker would need administrative privileges on the DCNM application. For more information about these vulnerabilities, see the Details section of this advisory. Note: The severity of these vulnerabilities is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.
CVE-2019-15984 Multiple vulnerabilities in the REST and SOAP API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to execute arbitrary SQL commands on an affected device. To exploit these vulnerabilities, an attacker would need administrative privileges on the DCNM application. For more information about these vulnerabilities, see the Details section of this advisory. Note: The severity of these vulnerabilities is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.
CVE-2019-15983 A vulnerability in the SOAP API of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to gain read access to information that is stored on an affected system. To exploit this vulnerability, an attacker would need administrative privileges on the DCNM application. The vulnerability exists because the SOAP API improperly handles XML External Entity (XXE) entries when parsing certain XML files. An attacker could exploit this vulnerability by inserting malicious XML content in an API request. A successful exploit could allow the attacker to read arbitrary files from the affected device. Note: The severity of this vulnerability is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.
CVE-2019-15982 Multiple vulnerabilities in the REST and SOAP API endpoints and the Application Framework feature of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to conduct directory traversal attacks on an affected device. To exploit these vulnerabilities, an attacker would need administrative privileges on the DCNM application. For more information about these vulnerabilities, see the Details section of this advisory. Note: The severity of these vulnerabilities is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.
CVE-2019-15981 Multiple vulnerabilities in the REST and SOAP API endpoints and the Application Framework feature of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to conduct directory traversal attacks on an affected device. To exploit these vulnerabilities, an attacker would need administrative privileges on the DCNM application. For more information about these vulnerabilities, see the Details section of this advisory. Note: The severity of these vulnerabilities is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.
CVE-2019-15980 Multiple vulnerabilities in the REST and SOAP API endpoints and the Application Framework feature of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to conduct directory traversal attacks on an affected device. To exploit these vulnerabilities, an attacker would need administrative privileges on the DCNM application. For more information about these vulnerabilities, see the Details section of this advisory. Note: The severity of these vulnerabilities is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.
CVE-2019-15977 Multiple vulnerabilities in the authentication mechanisms of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2019-15976 Multiple vulnerabilities in the authentication mechanisms of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2019-15975 Multiple vulnerabilities in the authentication mechanisms of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2019-15967 A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE) and Cisco RoomOS Software could allow an authenticated, local attacker to enable audio recording without notifying users. The vulnerability is due to the presence of unnecessary debug commands. An attacker could exploit this vulnerability by gaining unrestricted access to the restricted shell and using the specific debug commands. A successful exploit could allow the attacker to enable the microphone of an affected device to record audio without notifying users.
CVE-2019-15966 A vulnerability in the web application of Cisco TelePresence Advanced Media Gateway could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation in the web application. An attacker could exploit this vulnerability by sending a crafted authenticated HTTP request to the device. An exploit could allow the attacker to stop services on an affected device. The device may become inoperable and results in a denial of service (DoS) condition.
CVE-2019-15962 A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an authenticated, local attacker to write files to the /root directory of an affected device. The vulnerability is due to improper permission assignment. An attacker could exploit this vulnerability by logging in as the remotesupport user and writing files to the /root directory of an affected device.
CVE-2019-1596 A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to escalate their privilege level to root. The attacker must authenticate with valid user credentials. The vulnerability is due to incorrect permissions of a system executable. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Bash prompt. A successful exploit could allow the attacker to escalate their privilege level to root. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).
CVE-2019-15957 A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system. When processed, the commands will be executed with root privileges. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by providing malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as the root user.
CVE-2019-15956 A vulnerability in the web management interface of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform an unauthorized system reset on an affected device. The vulnerability is due to improper authorization controls for a specific URL in the web management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could have a twofold impact: the attacker could either change the administrator password, gaining privileged access, or reset the network configuration details, causing a denial of service (DoS) condition. In both scenarios, manual intervention is required to restore normal operations.
CVE-2019-1594 A vulnerability in the 802.1X implementation for Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete input validation of Extensible Authentication Protocol over LAN (EAPOL) frames. An attacker could exploit this vulnerability by sending a crafted EAPOL frame to an interface on the targeted device. A successful exploit could allow the attacker to cause the Layer 2 (L2) forwarding process to restart multiple times, leading to a system-level restart of the device and a DoS condition. Note: This vulnerability affects only NX-OS devices configured with 802.1X functionality. Cisco Nexus 1000V Switch for VMware vSphere devices are affected in versions prior to 5.2(1)SV3(1.4b). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.3(5)N1(1) and 7.1(5)N1(1b). Nexus 7000 and 7700 Series Switches are affected in versions prior to 8.2(3). Nexus 9000 Series Fabric Switches in ACI Mode are affected in versions prior to 13.2(1l). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(4).
CVE-2019-1593 A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to escalate their privilege level by executing commands authorized to other user roles. The attacker must authenticate with valid user credentials. The vulnerability is due to the incorrect implementation of a Bash shell command that allows role-based access control (RBAC) to be bypassed. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Bash prompt. A successful exploit could allow the attacker to escalate their privilege level by executing commands that should be restricted to other roles. For example, a dev-ops user could escalate their privilege level to admin with a successful exploit of this vulnerability.
CVE-2019-1592 A vulnerability in the background operations functionality of Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an authenticated, local attacker to gain elevated privileges as root on an affected device. The vulnerability is due to insufficient validation of user-supplied files on an affected device. An attacker could exploit this vulnerability by logging in to the CLI of the affected device and creating a crafted file in a specific directory on the filesystem. A successful exploit could allow the attacker to execute arbitrary operating system commands as root on an affected device.
CVE-2019-1591 A vulnerability in a specific CLI command implementation of Cisco Nexus 9000 Series ACI Mode Switch Software could allow an authenticated, local attacker to escape a restricted shell on an affected device. The vulnerability is due to insufficient sanitization of user-supplied input when issuing a specific CLI command with parameters on an affected device. An attacker could exploit this vulnerability by authenticating to the device CLI and issuing certain commands. A successful exploit could allow the attacker to escape the restricted shell and execute arbitrary commands with root-level privileges on the affected device. This vulnerability only affects Cisco Nexus 9000 Series ACI Mode Switches that are running a release prior to 14.0(3d).
CVE-2019-1590 A vulnerability in the Transport Layer Security (TLS) certificate validation functionality of Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, remote attacker to perform insecure TLS client authentication on an affected device. The vulnerability is due to insufficient TLS client certificate validations for certificates sent between the various components of an ACI fabric. An attacker who has possession of a certificate that is trusted by the Cisco Manufacturing CA and the corresponding private key could exploit this vulnerability by presenting a valid certificate while attempting to connect to the targeted device. An exploit could allow the attacker to gain full control of all other components within the ACI fabric of an affected device.
CVE-2019-1588 A vulnerability in the Cisco Nexus 9000 Series Fabric Switches running in Application-Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to read arbitrary files on an affected device. The vulnerability is due to a lack of proper input and validation checking mechanisms of user-supplied input sent to an affected device. A successful exploit could allow the attacker unauthorized access to read arbitrary files on an affected device. This vulnerability has been fixed in version 14.0(1h).
CVE-2019-1587 A vulnerability in Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, remote attacker to access sensitive information. The vulnerability occurs because the affected software does not properly validate user-supplied input. An attacker could exploit this vulnerability by issuing certain commands with filtered query results on the device. This action may cause returned messages to display confidential system information. A successful exploit could allow the attacker to read sensitive information on the device.
CVE-2019-1585 A vulnerability in the controller authorization functionality of Cisco Nexus 9000 Series ACI Mode Switch Software could allow an authenticated, local attacker to escalate standard users with root privilege on an affected device. The vulnerability is due to a misconfiguration of certain sudoers files for the bashroot component on an affected device. An attacker could exploit this vulnerability by authenticating to the affected device with a crafted user ID, which may allow temporary administrative access to escalate privileges. A successful exploit could allow the attacker to escalate privileges on an affected device. This Vulnerability has been fixed in version 4.0(1h)
CVE-2019-15766 The KSLABS KSWEB (aka ru.kslabs.ksweb) application 3.93 for Android allows authenticated remote code execution via a POST request to the AJAX handler with the configFile parameter set to the arbitrary file to be written to (and the config_text parameter set to the content of the file to be created). This can be a PHP file that is written to in the public web directory and subsequently executed. The attacker must have network connectivity to the PHP server that is running on the Android device.
CVE-2019-1575 Information disclosure in PAN-OS 7.1.23 and earlier, PAN-OS 8.0.18 and earlier, PAN-OS 8.1.8-h4 and earlier, and PAN-OS 9.0.2 and earlier may allow for an authenticated user with read-only privileges to extract the API key of the device and/or the username/password from the XML API (in PAN-OS) and possibly escalate privileges granted to them.
CVE-2019-15703 An Insufficient Entropy in PRNG vulnerability in Fortinet FortiOS 6.2.1, 6.2.0, 6.0.8 and below for device not enable hardware TRNG token and models not support builtin TRNG seed allows attacker to theoretically recover the long term ECDSA secret in a TLS client with a RSA handshake and mutual ECDSA authentication via the help of flush+reload side channel attacks in FortiGate VM models only.
CVE-2019-15288 A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE), Cisco TelePresence Codec (TC), and Cisco RoomOS Software could allow an authenticated, remote attacker to escalate privileges to an unrestricted user of the restricted shell. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including specific arguments when opening an SSH connection to an affected device. A successful exploit could allow the attacker to gain unrestricted user access to the restricted shell of an affected device.
CVE-2019-15282 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) Software could allow an unauthenticated, remote attacker read tcpdump files generated on an affected device. The vulnerability is due an issue in the authentication logic of the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web interface. A successful exploit could allow the attacker to read a tcpdump file generated with a particular naming scheme.
CVE-2019-15281 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The attacker must have valid administrator credentials. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by injecting malicious code into a troubleshooting file. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
CVE-2019-15277 A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an authenticated, local attacker to execute code with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating as the remote support user and sending malicious traffic to a listener who is internal to the device. A successful exploit could allow the attacker to execute commands with root privileges.
CVE-2019-15276 A vulnerability in the web interface of Cisco Wireless LAN Controller Software could allow a low-privileged, authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists due to a failure of the HTTP parsing engine to handle specially crafted URLs. An attacker could exploit this vulnerability by authenticating with low privileges to an affected controller and submitting the crafted URL to the web interface of the affected device. Conversely, an unauthenticated attacker could exploit this vulnerability by persuading a user of the web interface to click the crafted URL. A successful exploit could allow the attacker to cause an unexpected restart of the device, resulting in a DoS condition.
CVE-2019-15273 Multiple vulnerabilities in the CLI of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an authenticated, local attacker to overwrite arbitrary files. The vulnerabilities are due to insufficient permission enforcement. An attacker could exploit these vulnerabilities by authenticating as the remote support user and submitting malicious input to specific commands. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying filesystem. The attacker has no control over the contents of the data written to the file. Overwriting a critical file could cause the device to crash, resulting in a denial of service condition (DoS).
CVE-2019-15271 A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The attacker must have either a valid credential or an active session token. The vulnerability is due to lack of input validation of the HTTP payload. An attacker could exploit this vulnerability by sending a malicious HTTP request to the web-based management interface of the targeted device. A successful exploit could allow the attacker to execute commands with root privileges.
CVE-2019-15258 A vulnerability in the web-based management interface of Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to improper validation of user-supplied requests to the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to cause the device to stop responding, requiring manual intervention for recovery.
CVE-2019-15257 A vulnerability in the web-based management interface of Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to improper restrictions on configuration information. An attacker could exploit this vulnerability by sending a request to an affected device through the web-based management interface. A successful exploit could allow the attacker to return running configuration information that could also include sensitive information.
CVE-2019-15256 A vulnerability in the Internet Key Exchange version 1 (IKEv1) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper management of system memory. An attacker could exploit this vulnerability by sending malicious IKEv1 traffic to an affected device. The attacker does not need valid credentials to authenticate the VPN session, nor does the attacker's source address need to match a peer statement in the crypto map applied to the ingress interface of the affected device. An exploit could allow the attacker to exhaust system memory resources, leading to a reload of an affected device.
CVE-2019-15255 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to bypass authorization and access sensitive information related to the device. The vulnerability exists because the software fails to sanitize URLs before it handles requests. An attacker could exploit this vulnerability by submitting a crafted URL. A successful exploit could allow the attacker to gain unauthorized access to sensitive information.
CVE-2019-15253 A vulnerability in the web-based management interface of Cisco Digital Network Architecture (DNA) Center could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker needs administrator credentials. This vulnerability affects Cisco DNA Center Software releases earlier than 1.3.0.6 and 1.3.1.4.
CVE-2019-15252 Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.
CVE-2019-15251 Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.
CVE-2019-15250 Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.
CVE-2019-15249 Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.
CVE-2019-15248 Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.
CVE-2019-15247 Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.
CVE-2019-15246 Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.
CVE-2019-15245 Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.
CVE-2019-15244 Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.
CVE-2019-15243 Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.
CVE-2019-15242 Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.
CVE-2019-15241 Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.
CVE-2019-15240 Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.
CVE-2019-15230 LibreNMS v1.54 has XSS in the Create User, Inventory, Add Device, Notifications, Alert Rule, Create Maintenance, and Alert Template sections of the admin console. This could lead to cookie stealing and other malicious actions. This vulnerability can be exploited with an authenticated account.
CVE-2019-15069 An unsafe authentication interface was discovered in Smart Battery A4, a multifunctional portable charger, firmware version ?<= r1.7.9 . An attacker can bypass authentication without modifying device file and gain web page management privilege.
CVE-2019-15064 HiNet GPON firmware version < I040GWR190731 allows an attacker login to device without any authentication.
CVE-2019-14920 Billion Smart Energy Router SG600R2 Firmware v3.02.rc6 allows an authenticated attacker to gain root execution privileges over the device via a hidden etc_ro/web/adm/system_command.asp shell feature.
CVE-2019-14919 An exposed Telnet Service on the Billion Smart Energy Router SG600R2 with firmware v3.02.rc6 allows a local network attacker to authenticate via hardcoded credentials into a shell, gaining root execution privileges over the device.
CVE-2019-14596 Improper access control in the installer for Intel(R) Chipset Device Software INF Utility before version 10.1.18 may allow an authenticated user to potentially enable denial of service via local access.
CVE-2019-14326 An issue was discovered in AndyOS Andy versions up to 46.11.113. By default, it starts telnet and ssh (ports 22 and 23) with root privileges in the emulated Android system. This can be exploited by remote attackers to gain full access to the device, or by malicious apps installed inside the emulator to perform privilege escalation from a normal user to root (unlike with standard methods of getting root privileges on Android - e.g., the SuperSu program - the user is not asked for consent). There is no authentication performed - access to a root shell is given upon a successful connection. NOTE: although this was originally published with a slightly different CVE ID number, the correct ID for this Andy vulnerability has always been CVE-2019-14326.
CVE-2019-13529 An attacker could send a malicious link to an authenticated operator, which may allow remote attackers to perform actions with the permissions of the user on the Sunny WebBox Firmware Version 1.6 and prior. This device uses IP addresses to maintain communication after a successful login, which would increase the ease of exploitation.
CVE-2019-13405 A broken access control vulnerability found in Advan VD-1 firmware version 230 leads to insecure ADB service. An attacker can send a POST request to cgibin/AdbSetting.cgi to enable ADB without any authentication then take the compromised device as a relay or to install mining software.
CVE-2019-13206 Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by a buffer overflow vulnerability in multiple parameters of the Document Boxes functionality of the web application that would allow an authenticated attacker to perform a Denial of Service attack, crashing the device, or potentially execute arbitrary code on the device.
CVE-2019-13203 Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by an integer overflow vulnerability in the arg3 parameter of several functionalities of the web application that would allow an authenticated attacker to perform a Denial of Service attack, crashing the device, or potentially execute arbitrary code on the device.
CVE-2019-13196 Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by a buffer overflow vulnerability in the arg4 and arg9 parameters of several functionalities of the web application that would allow an authenticated attacker to perform a Denial of Service attack, crashing the device, or potentially execute arbitrary code on the device.
CVE-2019-13172 Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by a buffer overflow vulnerability in the Authentication Cookie of the web application that would allow an attacker to execute arbitrary code on the device.
CVE-2019-13098 The user password via the registration form of TronLink Wallet 2.2.0 is stored in the log when the class CreateWalletTwoActivity is called. Other authenticated users can read it in the log later. The logged data can be read using Logcat on the device. When using platforms prior to Android 4.1 (Jelly Bean), the log data is not sandboxed per application; any application installed on the device has the capability to read data logged by other applications.
CVE-2019-12775 An issue was discovered on the ENTTEC Datagate MK2, Storm 24, Pixelator, and E-Streamer MK2 with firmware 70044_update_05032019-482. They allow high-privileged root access by www-data via sudo without requiring appropriate access control. (Furthermore, the user account that controls the web application service is granted full access to run any system commands with elevated privilege, without the need for password authentication. Should vulnerabilities be identified and exploited within the web application, it may be possible for a threat actor to create or run high-privileged binaries or executables that are available within the operating system of the device.)
CVE-2019-12717 A vulnerability in a CLI command related to the virtualization manager (VMAN) in Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. The vulnerability is due to insufficient validation of arguments passed to a specific VMAN CLI command on an affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges, which may lead to complete system compromise. An attacker would need valid administrator credentials to exploit this vulnerability.
CVE-2019-12714 A vulnerability in the web-based management interface of Cisco IC3000 Industrial Compute Gateway could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software improperly manages system resources. An attacker could exploit this vulnerability by opening a large number of simultaneous sessions on the web-based management interface of an affected device. A successful exploit could allow the attacker to cause a DoS condition of the web-based management interface, preventing normal management operations.
CVE-2019-12709 A vulnerability in a CLI command related to the virtualization manager (VMAN) in Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. The vulnerability is due to insufficient validation of arguments passed to a specific VMAN CLI command on an affected device. An attacker who has valid administrator access to an affected device could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to run arbitrary commands on the underlying operating system with root privileges, which may lead to complete system compromise.
CVE-2019-12708 A vulnerability in the web-based management interface of Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to unsafe handling of user credentials. An attacker could exploit this vulnerability by viewing portions of the web-based management interface of an affected device. A successful exploit could allow the attacker to access administrative credentials and potentially gain elevated privileges by reusing stolen credentials on the affected device.
CVE-2019-12704 A vulnerability in the web-based management interface of Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, remote attacker to view the contents of arbitrary files on an affected device. The vulnerability is due to improper input validation in the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to retrieve the contents of arbitrary files on the device, possibly resulting in the disclosure of sensitive information.
CVE-2019-12700 A vulnerability in the configuration of the Pluggable Authentication Module (PAM) used in Cisco Firepower Threat Defense (FTD) Software, Cisco Firepower Management Center (FMC) Software, and Cisco FXOS Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper resource management in the context of user session management. An attacker could exploit this vulnerability by connecting to an affected system and performing many simultaneous successful Secure Shell (SSH) logins. A successful exploit could allow the attacker to exhaust system resources and cause the device to reload, resulting in a DoS condition. To exploit this vulnerability, the attacker needs valid user credentials on the system.
CVE-2019-12693 A vulnerability in the Secure Copy (SCP) feature of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to the use of an incorrect data type for a length variable. An attacker could exploit this vulnerability by initiating the transfer of a large file to an affected device via SCP. To exploit this vulnerability, the attacker would need to have valid privilege level 15 credentials on the affected device. A successful exploit could allow the attacker to cause the length variable to roll over, which could cause the affected device to crash.
CVE-2019-12691 A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to perform a directory traversal attack on an affected device. The vulnerability is due to insufficient input validation by the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface. A successful exploit could allow the attacker to bypass Cisco FMC Software security restrictions and gain access to the underlying filesystem of the affected device.
CVE-2019-12690 A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to inject arbitrary commands that are executed with the privileges of the root user of the underlying operating system. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input in the web UI. A successful exploit could allow an attacker to execute arbitrary commands on the device with full root privileges.
CVE-2019-12689 A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending malicious commands to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device.
CVE-2019-12688 A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.
CVE-2019-12687 A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.
CVE-2019-12686 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary SQL injections on an affected device. These vulnerabilities exist due to improper input validation. An attacker could exploit these vulnerabilities by sending crafted SQL queries to an affected device. A successful exploit could allow the attacker to view information that they are not authorized to view, make changes to the system that they are not authorized to make, and execute commands within the underlying operating system that may affect the availability of the device.
CVE-2019-12685 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary SQL injections on an affected device. These vulnerabilities exist due to improper input validation. An attacker could exploit these vulnerabilities by sending crafted SQL queries to an affected device. A successful exploit could allow the attacker to view information that they are not authorized to view, make changes to the system that they are not authorized to make, and execute commands within the underlying operating system that may affect the availability of the device.
CVE-2019-12684 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary SQL injections on an affected device. These vulnerabilities exist due to improper input validation. An attacker could exploit these vulnerabilities by sending crafted SQL queries to an affected device. A successful exploit could allow the attacker to view information that they are not authorized to view, make changes to the system that they are not authorized to make, and execute commands within the underlying operating system that may affect the availability of the device.
CVE-2019-12683 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary SQL injections on an affected device. These vulnerabilities exist due to improper input validation. An attacker could exploit these vulnerabilities by sending crafted SQL queries to an affected device. A successful exploit could allow the attacker to view information that they are not authorized to view, make changes to the system that they are not authorized to make, and execute commands within the underlying operating system that may affect the availability of the device.
CVE-2019-12682 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary SQL injections on an affected device. These vulnerabilities exist due to improper input validation. An attacker could exploit these vulnerabilities by sending crafted SQL queries to an affected device. A successful exploit could allow the attacker to view information that they are not authorized to view, make changes to the system that they are not authorized to make, and execute commands within the underlying operating system that may affect the availability of the device.
CVE-2019-12681 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary SQL injections on an affected device. These vulnerabilities exist due to improper input validation. An attacker could exploit these vulnerabilities by sending crafted SQL queries to an affected device. A successful exploit could allow the attacker to view information that they are not authorized to view, make changes to the system that they are not authorized to make, and execute commands within the underlying operating system that may affect the availability of the device.
CVE-2019-12680 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary SQL injections on an affected device. These vulnerabilities exist due to improper input validation. An attacker could exploit these vulnerabilities by sending crafted SQL queries to an affected device. A successful exploit could allow the attacker to view information that they are not authorized to view, make changes to the system that they are not authorized to make, and execute commands within the underlying operating system that may affect the availability of the device.
CVE-2019-12679 Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary SQL injections on an affected device. These vulnerabilities exist due to improper input validation. An attacker could exploit these vulnerabilities by sending crafted SQL queries to an affected device. A successful exploit could allow the attacker to view information that they are not authorized to view, make changes to the system that they are not authorized to make, and execute commands within the underlying operating system that may affect the availability of the device.
CVE-2019-12677 A vulnerability in the Secure Sockets Layer (SSL) VPN feature of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition that prevents the creation of new SSL/Transport Layer Security (TLS) connections to an affected device. The vulnerability is due to incorrect handling of Base64-encoded strings. An attacker could exploit this vulnerability by opening many SSL VPN sessions to an affected device. The attacker would need to have valid user credentials on the affected device to exploit this vulnerability. A successful exploit could allow the attacker to overwrite a special system memory location, which will eventually result in memory allocation errors for new SSL/TLS sessions to the device, preventing successful establishment of these sessions. A reload of the device is required to recover from this condition. Established SSL/TLS connections to the device and SSL/TLS connections through the device are not affected. Note: Although this vulnerability is in the SSL VPN feature, successful exploitation of this vulnerability would affect all new SSL/TLS sessions to the device, including management sessions.
CVE-2019-12672 A vulnerability in the filesystem of Cisco IOS XE Software could allow an authenticated, local attacker with physical access to an affected device to execute arbitrary code on the underlying operating system (OS) with root privileges. The vulnerability is due to insufficient file location validation. An attacker could exploit this vulnerability by placing code in a specific format on a USB device and inserting it into an affected Cisco device. A successful exploit could allow the attacker to execute the code with root privileges on the underlying OS of the affected device.
CVE-2019-12671 A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to gain shell access on an affected device and execute commands on the underlying operating system (OS). The vulnerability is due to insufficient enforcement of the consent token in authorizing shell access. An attacker could exploit this vulnerability by authenticating to the CLI and requesting shell access on an affected device. A successful exploit could allow the attacker to gain shell access on the affected device and execute commands on the underlying OS.
CVE-2019-12670 A vulnerability in the filesystem of Cisco IOS XE Software could allow an authenticated, local attacker within the IOx Guest Shell to modify the namespace container protections on an affected device. The vulnerability is due to insufficient file permissions. An attacker could exploit this vulnerability by modifying files that they should not have access to. A successful exploit could allow the attacker to remove container protections and perform file actions outside the namespace of the container.
CVE-2019-12664 A vulnerability in the Dialer interface feature for ISDN connections in Cisco IOS XE Software for Cisco 4000 Series Integrated Services Routers (ISRs) could allow an unauthenticated, adjacent attacker to pass IPv4 traffic through an ISDN channel prior to successful PPP authentication. The vulnerability is due to insufficient validation of the state of the PPP IP Control Protocol (IPCP). An attacker could exploit this vulnerability by making an ISDN call to an affected device and sending traffic through the ISDN channel prior to successful PPP authentication. Alternatively, an unauthenticated, remote attacker could exploit this vulnerability by sending traffic through an affected device that is configured to exit via an ISDN connection for which both the Dialer interface and the Basic Rate Interface (BRI) have been configured, but the Challenge Handshake Authentication Protocol (CHAP) password for PPP does not match the remote end. A successful exploit could allow the attacker to pass IPv4 traffic through an unauthenticated ISDN connection for a few seconds, from initial ISDN call setup until PPP authentication fails.
CVE-2019-12662 A vulnerability in Cisco NX-OS Software and Cisco IOS XE Software could allow an authenticated, local attacker with valid administrator or privilege level 15 credentials to load a virtual service image and bypass signature verification on an affected device. The vulnerability is due to improper signature verification during the installation of an Open Virtual Appliance (OVA) image. An authenticated, local attacker could exploit this vulnerability and load a malicious, unsigned OVA image on an affected device. A successful exploit could allow an attacker to perform code execution on a crafted software OVA image.
CVE-2019-12661 A vulnerability in a Virtualization Manager (VMAN) related CLI command of Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific VMAN CLI command on the affected device. An attacker who has administrator access to an affected device could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the device with root privileges, which may lead to complete system compromise.
CVE-2019-12660 A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to write values to the underlying memory of an affected device. The vulnerability is due to improper input validation and authorization of specific commands that a user can execute within the CLI. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a specific set of commands. A successful exploit could allow the attacker to modify the configuration of the device to cause it to be non-secure and abnormally functioning.
CVE-2019-12651 Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2019-12650 Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.
CVE-2019-12649 A vulnerability in the Image Verification feature of Cisco IOS XE Software could allow an authenticated, local attacker to install and boot a malicious software image or execute unsigned binaries on an affected device. The vulnerability exists because, under certain circumstances, an affected device can be configured to not verify the digital signatures of system image files during the boot process. An attacker could exploit this vulnerability by abusing a specific feature that is part of the device boot process. A successful exploit could allow the attacker to install and boot a malicious software image or execute unsigned binaries on the targeted device.
CVE-2019-12648 A vulnerability in the IOx application environment for Cisco IOS Software could allow an authenticated, remote attacker to gain unauthorized access to the Guest Operating System (Guest OS) running on an affected device. The vulnerability is due to incorrect role-based access control (RBAC) evaluation when a low-privileged user requests access to a Guest OS that should be restricted to administrative accounts. An attacker could exploit this vulnerability by authenticating to the Guest OS by using the low-privileged-user credentials. An exploit could allow the attacker to gain unauthorized access to the Guest OS as a root user.
CVE-2019-12645 A vulnerability in Cisco Jabber Client Framework (JCF) for Mac Software, installed as part of the Cisco Jabber for Mac client, could allow an authenticated, local attacker to execute arbitrary code on an affected device The vulnerability is due to improper file level permissions on an affected device when it is running Cisco JCF for Mac Software. An attacker could exploit this vulnerability by authenticating to the affected device and executing arbitrary code or potentially modifying certain configuration files. A successful exploit could allow the attacker to execute arbitrary code or modify certain configuration files on the device using the privileges of the installed Cisco JCF for Mac Software.
CVE-2019-12643 A vulnerability in the Cisco REST API virtual service container for Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass authentication on the managed Cisco IOS XE device. The vulnerability is due to an improper check performed by the area of code that manages the REST API authentication service. An attacker could exploit this vulnerability by submitting malicious HTTP requests to the targeted device. A successful exploit could allow the attacker to obtain the token-id of an authenticated user. This token-id could be used to bypass authentication and execute privileged actions through the interface of the REST API virtual service container on the affected Cisco IOS XE device. The REST API interface is not enabled by default and must be installed and activated separately on IOS XE devices. See the Details section for more information.
CVE-2019-12626 A vulnerability in the web-based management interface of Cisco Unified Contact Center Express (Unified CCX) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker needs valid administrator credentials.
CVE-2019-12622 A vulnerability in Cisco RoomOS Software could allow an authenticated, local attacker to write files to the underlying filesystem with root privileges. The vulnerability is due to insufficient permission restrictions on a specific process. An attacker could exploit this vulnerability by logging in to an affected device with remote support credentials and initiating the specific process on the device and sending crafted data to that process. A successful exploit could allow the attacker to write files to the underlying file system with root privileges.
CVE-2019-12620 A vulnerability in the statistics collection service of Cisco HyperFlex Software could allow an unauthenticated, remote attacker to inject arbitrary values on an affected device. The vulnerability is due to insufficient authentication for the statistics collection service. An attacker could exploit this vulnerability by sending properly formatted data values to the statistics collection service of an affected device. A successful exploit could allow the attacker to cause the web interface statistics view to present invalid data to users.
CVE-2019-12510 In NETGEAR Nighthawk X10-R900 prior to 1.0.4.26, an attacker may bypass all authentication checks on the device's "NETGEAR Genie" SOAP API ("/soap/server_sa") by supplying a malicious X-Forwarded-For header of the device's LAN IP address (192.168.1.1) in every request. As a result, an attacker may modify almost all of the device's settings and view various configuration settings.
CVE-2019-12325 The Htek UC902 VoIP phone web management interface contains several buffer overflow vulnerabilities in the firmware version 2.0.4.4.46, which allow an attacker to crash the device (DoS) without authentication or execute code (authenticated as a user) to spawn a remote shell as a root user.
CVE-2019-12288 An issue was discovered in upgrade_htmls.cgi on VStarcam 100T (C7824WIP) KR75.8.53.20 and 200V (C38S) KR203.18.1.20 devices. The web service, network, and account files can be manipulated through a web UI firmware update without any authentication. The attacker can achieve access to the device through a manipulated web UI firmware update.
CVE-2019-12148 The Sangoma Session Border Controller (SBC) 2.3.23-119 GA web interface is vulnerable to an authentication bypass via an argument injection vulnerability involving special characters in the username field. Upon successful exploitation, a remote unauthenticated user can login into the device's admin web portal without providing any credentials. This affects /var/webconfig/gui/Webconfig.inc.php.
CVE-2019-12147 The Sangoma Session Border Controller (SBC) 2.3.23-119 GA web interface is vulnerable to Argument Injection via special characters in the username field. Upon successful exploitation, a remote unauthenticated user can create a local system user with sudo privileges, and use that user to login to the system (either via the web interface or via SSH) to achieve complete compromise of the device. This affects /var/webconfig/gui/Webconfig.inc.php and /usr/local/sng/bin/sng-user-mgmt.
CVE-2019-11538 In Pulse Secure Pulse Connect Secure version 9.0RX before 9.0R3.4, 8.3RX before 8.3R7.1, 8.2RX before 8.2R12.1, and 8.1RX before 8.1R15.1, an NFS problem could allow an authenticated attacker to access the contents of arbitrary files on the affected device.
CVE-2019-11523 Anviz Global M3 Outdoor RFID Access Control executes any command received from any source. No authentication/encryption is done. Attackers can fully interact with the device: for example, send the "open door" command, download the users list (which includes RFID codes and passcodes in cleartext), or update/create users. The same attack can be executed on a local network and over the internet (if the device is exposed on a public IP address).
CVE-2019-11220 An authentication flaw in Shenzhen Yunni Technology iLnkP2P allows remote attackers to actively intercept user-to-device traffic in cleartext, including video streams and device credentials.
CVE-2019-10937 A vulnerability has been identified in SIMATIC TDC CP51M1 (All versions < V1.1.7). An attacker with network access to the device could cause a Denial-of-Service condition by sending a specially crafted UDP packet. The vulnerability affects the UDP communication of the device. The security vulnerability could be exploited without authentication. No user interaction is required to exploit this security vulnerability. Successful exploitation of the security vulnerability compromises availability of the targeted system. At the time of advisory publication no public exploitation of this security vulnerability was known.
CVE-2019-10935 A vulnerability has been identified in SIMATIC PCS 7 V8.0 and earlier (All versions), SIMATIC PCS 7 V8.1 (All versions < V8.1 with WinCC V7.3 Upd 19), SIMATIC PCS 7 V8.2 (All versions < V8.2 SP1 with WinCC V7.4 SP1 Upd 11), SIMATIC PCS 7 V9.0 (All versions < V9.0 SP2 with WinCC V7.4 SP1 Upd11), SIMATIC WinCC Professional (TIA Portal V13) (All versions), SIMATIC WinCC Professional (TIA Portal V14) (All versions < V14 SP1 Upd 9), SIMATIC WinCC Professional (TIA Portal V15) (All versions < V15.1 Upd 3), SIMATIC WinCC Runtime Professional V13 (All versions), SIMATIC WinCC Runtime Professional V14 (All versions < V14.1 Upd 8), SIMATIC WinCC Runtime Professional V15 (All versions < V15.1 Upd 3), SIMATIC WinCC V7.2 and earlier (All versions), SIMATIC WinCC V7.3 (All versions < V7.3 Upd 19), SIMATIC WinCC V7.4 (All versions < V7.4 SP1 Upd 11), SIMATIC WinCC V7.5 (All versions < V7.5 Upd 3). The SIMATIC WinCC DataMonitor web application of the affected products allows to upload arbitrary ASPX code. The security vulnerability could be exploited by an authenticated attacker with network access to the WinCC DataMonitor application. No user interaction is required to exploit this vulnerability. The vulnerability impacts confidentiality, integrity, and availability of the affected device. At the stage of publishing this security advisory no public exploitation is known.
CVE-2019-10928 A vulnerability has been identified in SCALANCE SC-600 (V2.0). An authenticated attacker with access to port 22/tcp as well as physical access to an affected device may trigger the device to allow execution of arbitrary commands. The security vulnerability could be exploited by an authenticated attacker with physical access to the affected device. No user interaction is required to exploit this vulnerability. The vulnerability impacts the confidentiality, integrity and availability of the affected device.
CVE-2019-10927 A vulnerability has been identified in SCALANCE SC-600 (V2.0), SCALANCE XB-200 (V4.1), SCALANCE XC-200 (V4.1), SCALANCE XF-200BA (V4.1), SCALANCE XP-200 (V4.1), SCALANCE XR-300WG (V4.1). An authenticated attacker with network access to to port 22/tcp of an affected device may cause a Denial-of-Service condition. The security vulnerability could be exploited by an authenticated attacker with network access to the affected device. No user interaction is required to exploit this vulnerability. The vulnerability impacts the availability of the affected device.
CVE-2019-10925 A vulnerability has been identified in SIMATIC MV400 family (All Versions < V7.0.6). An authenticated attacker could escalate privileges by sending specially crafted requests to the integrated webserver. The security vulnerability can be exploited by an attacker with network access to the device. Valid user credentials, but no user interaction are required. Successful exploitation compromises integrity and availability of the device. At the time of advisory publication no public exploitation of this security vulnerability was known.
CVE-2019-10919 A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Attackers with access to port 10005/tcp could perform device reconfigurations and obtain project files from the devices. The system manual recommends to protect access to this port. The security vulnerability could be exploited by an unauthenticated attacker with network access to port 10005/tcp. No user interaction is required to exploit this security vulnerability. The vulnerability impacts confidentiality, integrity, and availability of the device. At the time of advisory publication no public exploitation of this security vulnerability was known.
CVE-2019-10706 Western Digital SanDisk SanDisk X300, X300s, X400, and X600 devices: The firmware update authentication method relies on a symmetric HMAC digest. The key used to validate this digest is present in a protected area of the device, and if extracted could be used to install arbitrary firmware to other devices.
CVE-2019-10575 Wlan binary which is not signed with OEMs RoT is working on secure device without authentication failure in Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile in SDA845, SDM845, SDM850
CVE-2019-0128 Improper permissions in the installer for Intel(R) Chipset Device Software (INF Update Utility) before version 10.1.1.45 may allow an authenticated user to escalate privilege via local access.
CVE-2019-0069 On EX4600, QFX5100 Series, NFX Series, QFX10K Series, QFX5110, QFX5200 Series, QFX5110, QFX5200, QFX10K Series, vSRX, SRX1500, SRX4000 Series, vSRX, SRX1500, SRX4000, QFX5110, QFX5200, QFX10K Series, when the user uses console management port to authenticate, the credentials used during device authentication are written to a log file in clear text. This issue does not affect users that are logging-in using telnet, SSH or J-web to the management IP. This issue affects ACX, NFX, SRX, EX and QFX platforms with the Linux Host OS architecture, it does not affect other SRX and EX platforms that do not use the Linux Host OS architecture. This issue affects Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D110 on vSRX, SRX1500, SRX4000 Series; 15.1X53 versions prior to 15.1X53-D234 on QFX5110, QFX5200 Series; 15.1X53 versions prior to 15.1X53-D68 on QFX10K Series; 17.1 versions prior to 17.1R2-S8, 17.1R3, on QFX5110, QFX5200, QFX10K Series; 17.2 versions prior to 17.2R1-S7, 17.2R2-S6, 17.2R3 on QFX5110, QFX5200, QFX10K Series; 17.3 versions prior to 17.3R2 on vSRX, SRX1500, SRX4000, QFX5110, QFX5200, QFX10K Series; 14.1X53 versions prior to 14.1X53-D47 on ACX5000, EX4600, QFX5100 Series; 15.1 versions prior to 15.1R7 on ACX5000, EX4600, QFX5100 Series; 16.1R7 versions prior to 16.1R7 on ACX5000, EX4600, QFX5100 Series; 17.1 versions prior to 17.1R2-S10, 17.1R3 on ACX5000, EX4600, QFX5100 Series; 17.2 versions prior to 17.2R3 on ACX5000, EX4600, QFX5100 Series; 17.3 versions prior to 17.3R3 on ACX5000, EX4600, QFX5100 Series; 17.4 versions prior to 17.4R2 on ACX5000, EX4600, QFX5100 Series; 18.1 versions prior to 18.1R2 on ACX5000, EX4600, QFX5100 Series; 15.1X53 versions prior to 15.1X53-D496 on NFX Series, 17.2 versions prior to 17.2R3-S1 on NFX Series; 17.3 versions prior to 17.3R3-S4 on NFX Series; 17.4 versions prior to 17.4R2-S4, 17.4R3 on NFX Series, 18.1 versions prior to 18.1R3-S4 on NFX Series; 18.2 versions prior to 18.2R2-S3, 18.2R3 on NFX Series; 18.3 versions prior to 18.3R1-S3, 18.3R2 on NFX Series; 18.4 versions prior to 18.4R1-S1, 18.4R2 on NFX Series.
CVE-2019-0057 An improper authorization weakness in Juniper Networks Junos OS allows a local authenticated attacker to bypass regular security controls to access the Junos Device Manager (JDM) application and take control of the system. This issue affects: Juniper Networks Junos OS versions prior to 18.2R1, 18.2X75-D5.
CVE-2019-0027 A persistent cross-site scripting (XSS) vulnerability in the Snort Rules configuration of Juniper ATP may allow authenticated user to inject arbitrary script and steal sensitive data and credentials from a web administration session, possibly tricking a follow-on administrative user to perform administrative actions on the device. This issue affects Juniper ATP 5.0 versions prior to 5.0.3.
CVE-2019-0026 A persistent cross-site scripting (XSS) vulnerability in the Zone configuration of Juniper ATP may allow authenticated user to inject arbitrary script and steal sensitive data and credentials from a web administration session, possibly tricking a follow-on administrative user to perform administrative actions on the device. This issue affects Juniper ATP 5.0 versions prior to 5.0.3.
CVE-2019-0025 A persistent cross-site scripting (XSS) vulnerability in RADIUS configuration menu of Juniper ATP may allow authenticated user to inject arbitrary script and steal sensitive data and credentials from a web administration session, possibly tricking a follow-on administrative user to perform administrative actions on the device. This issue affects Juniper ATP 5.0 versions prior to 5.0.3.
CVE-2019-0024 A persistent cross-site scripting (XSS) vulnerability in the Email Collectors menu of Juniper ATP may allow authenticated user to inject arbitrary script and steal sensitive data and credentials from a web administration session, possibly tricking a follow-on administrative user to perform administrative actions on the device. This issue affects Juniper ATP 5.0 versions prior to 5.0.3.
CVE-2019-0023 A persistent cross-site scripting (XSS) vulnerability in the Golden VM menu of Juniper ATP may allow authenticated user to inject arbitrary script and steal sensitive data and credentials from a web administration session, possibly tricking a follow-on administrative user to perform administrative actions on the device. This issue affects Juniper ATP 5.0 versions prior to 5.0.3.
CVE-2019-0018 A persistent cross-site scripting (XSS) vulnerability in the file upload menu of Juniper ATP may allow an authenticated user to inject arbitrary scripts and steal sensitive data and credentials from a web administration session, possibly tricking a follow-on administrative user to perform administrative actions on the device. This issue affects Juniper ATP 5.0 versions prior to 5.0.3.
CVE-2019-0016 A malicious authenticated user may be able to delete a device from the Junos Space database without the necessary privileges through crafted Ajax interactions obtained from another legitimate delete action performed by another administrative user. Affected releases are Juniper Networks Junos Space versions prior to 18.3R1.
CVE-2019-0015 A vulnerability in the SRX Series Service Gateway allows deleted dynamic VPN users to establish dynamic VPN connections until the device is rebooted. A deleted dynamic VPN connection should be immediately disallowed from establishing new VPN connections. Due to an error in token caching, deleted users are allowed to connect once a previously successful dynamic VPN connection has been established. A reboot is required to clear the cached authentication token. Affected releases are Junos OS on SRX Series: 12.3X48 versions prior to 12.3X48-D75; 15.1X49 versions prior to 15.1X49-D150; 17.3 versions prior to 17.3R3; 17.4 versions prior to 17.4R2; 18.1 versions prior to 18.1R3; 18.2 versions prior to 18.2R2.
CVE-2019-0004 On Juniper ATP, the API key and the device key are logged in a file readable by authenticated local users. These keys are used for performing critical operations on the WebUI interface. This issue affects Juniper ATP 5.0 versions prior to 5.0.3.
CVE-2018-8852 Philips e-Alert Unit (non-medical device), Version R2.1 and prior. When authenticating a user or otherwise establishing a new user session, the software gives an attacker the opportunity to steal authenticated sessions without invalidating any existing session identifier.
CVE-2018-7947 Huawei mobile phones with versions earlier before Emily-AL00A 8.1.0.153(C00) have an authentication bypass vulnerability. An attacker could trick the user to connect to a malicious device. In the debug mode, the malicious software in the device may exploit the vulnerability to bypass some specific function. Successful exploit may cause some malicious applications to be installed in the mobile phones.
CVE-2018-7299 Remote Code Execution in the addon installation process in eQ-3 AG Homematic CCU2 2.29.2 and earlier allows authenticated attackers to create or overwrite arbitrary files or install malicious software on the device.
CVE-2018-6979 The VMware Workspace ONE Unified Endpoint Management Console (A/W Console) 9.7.x prior to 9.7.0.3, 9.6.x prior to 9.6.0.7, 9.5.x prior to 9.5.0.16, 9.4.x prior to 9.4.0.22, 9.3.x prior to 9.3.0.25, 9.2.x prior to 9.2.3.27, and 9.1.x prior to 9.1.5.6 contains a SAML authentication bypass vulnerability which can be leveraged during device enrollment. This vulnerability may allow for a malicious actor to impersonate an authorized SAML session if certificate-based authentication is enabled. This vulnerability is also relevant if certificate-based authentication is not enabled, but the outcome of exploitation is limited to an information disclosure (Important Severity) in those cases.
CVE-2018-6908 An authentication bypass vulnerability exists in the Green Electronics RainMachine Mini-8 (2nd Generation) and Touch HD 12 web application allowing an unauthenticated attacker to perform authenticated actions on the device via a 127.0.0.1:port value in the HTTP 'Host' header, as demonstrated by retrieving credentials.
CVE-2018-5455 A Reliance on Cookies without Validation and Integrity Checking issue was discovered in Moxa OnCell G3100-HSPA Series version 1.4 Build 16062919 and prior. The application allows a cookie parameter to consist of only digits, allowing an attacker to perform a brute force attack bypassing authentication and gaining access to device functions.
CVE-2018-4861 A vulnerability has been identified in SCALANCE M875 (All versions). An authenticated remote attacker with access to the web interface (443/tcp), could potentially read and download arbitrary files from the device's file system. Successful exploitation requires that the attacker has network access to the web interface. The attacker must be authenticated as administrative user to exploit the security vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.
CVE-2018-4860 A vulnerability has been identified in SCALANCE M875 (All versions). An authenticated remote attacker with access to the web interface (443/tcp), could execute arbitrary operating system commands. Successful exploitation requires that the attacker has network access to the web interface. The attacker must be authenticated as administrative user to exploit the security vulnerability. The vulnerability could allow an attacker to execute arbitrary code on the device. At the time of advisory publication no public exploitation of this security vulnerability was known.
CVE-2018-4859 A vulnerability has been identified in SCALANCE M875 (All versions). An authenticated remote attacker with access to the web interface (443/tcp), could execute arbitrary operating system commands. Successful exploitation requires that the attacker has network access to the web interface. The attacker must be authenticated as administrative user to exploit the security vulnerability. The vulnerability could allow an attacker to execute arbitrary code on the device. At the time of advisory publication no public exploitation of this security vulnerability was known.
CVE-2018-4852 A vulnerability has been identified in SICLOCK TC100 (All versions) and SICLOCK TC400 (All versions). An attacker with network access to the device could potentially circumvent the authentication mechanism if he/she is able to obtain certain knowledge specific to the attacked device.
CVE-2018-4841 A vulnerability has been identified in TIM 1531 IRC (All versions < V1.1). A remote attacker with network access to port 80/tcp or port 443/tcp could perform administrative operations on the device without prior authentication. Successful exploitation could allow to cause a denial-of-service, or read and manipulate data as well as configuration settings of the affected device. At the stage of publishing this security advisory no public exploitation is known. Siemens provides mitigations to resolve it.
CVE-2018-4834 A vulnerability has been identified in Desigo PXC00-E.D V4.10 (All versions < V4.10.111), Desigo PXC00-E.D V5.00 (All versions < V5.0.171), Desigo PXC00-E.D V5.10 (All versions < V5.10.69), Desigo PXC00-E.D V6.00 (All versions < V6.0.204), Desigo PXC00/64/128-U V4.10 (All versions < V4.10.111 only with web module), Desigo PXC00/64/128-U V5.00 (All versions < V5.0.171 only with web module), Desigo PXC00/64/128-U V5.10 (All versions < V5.10.69 only with web module), Desigo PXC00/64/128-U V6.00 (All versions < V6.0.204 only with web module), Desigo PXC001-E.D V4.10 (All versions < V4.10.111), Desigo PXC001-E.D V5.00 (All versions < V5.0.171), Desigo PXC001-E.D V5.10 (All versions < V5.10.69), Desigo PXC001-E.D V6.00 (All versions < V6.0.204), Desigo PXC100-E.D V4.10 (All versions < V4.10.111), Desigo PXC100-E.D V5.00 (All versions < V5.0.171), Desigo PXC100-E.D V5.10 (All versions < V5.10.69), Desigo PXC100-E.D V6.00 (All versions < V6.0.204), Desigo PXC12-E.D V4.10 (All versions < V4.10.111), Desigo PXC12-E.D V5.00 (All versions < V5.0.171), Desigo PXC12-E.D V5.10 (All versions < V5.10.69), Desigo PXC12-E.D V6.00 (All versions < V6.0.204), Desigo PXC200-E.D V4.10 (All versions < V4.10.111), Desigo PXC200-E.D V5.00 (All versions < V5.0.171), Desigo PXC200-E.D V5.10 (All versions < V5.10.69), Desigo PXC200-E.D V6.00 (All versions < V6.0.204), Desigo PXC22-E.D V4.10 (All versions < V4.10.111), Desigo PXC22-E.D V5.00 (All versions < V5.0.171), Desigo PXC22-E.D V5.10 (All versions < V5.10.69), Desigo PXC22-E.D V6.00 (All versions < V6.0.204), Desigo PXC22.1-E.D V4.10 (All versions < V4.10.111), Desigo PXC22.1-E.D V5.00 (All versions < V5.0.171), Desigo PXC22.1-E.D V5.10 (All versions < V5.10.69), Desigo PXC22.1-E.D V6.00 (All versions < V6.0.204), Desigo PXC36.1-E.D V4.10 (All versions < V4.10.111), Desigo PXC36.1-E.D V5.00 (All versions < V5.0.171), Desigo PXC36.1-E.D V5.10 (All versions < V5.10.69), Desigo PXC36.1-E.D V6.00 (All versions < V6.0.204), Desigo PXC50-E.D V4.10 (All versions < V4.10.111), Desigo PXC50-E.D V5.00 (All versions < V5.0.171), Desigo PXC50-E.D V5.10 (All versions < V5.10.69), Desigo PXC50-E.D V6.00 (All versions < V6.0.204), Desigo PXM20-E V4.10 (All versions < V4.10.111), Desigo PXM20-E V5.00 (All versions < V5.0.171), Desigo PXM20-E V5.10 (All versions < V5.10.69), Desigo PXM20-E V6.00 (All versions < V6.0.204). A remote attacker with network access to the device could potentially upload a new firmware image to the devices without prior authentication.
CVE-2018-4069 An information disclosure vulnerability exists in the ACEManager authentication functionality of Sierra Wireless AirLink ES450 FW 4.9.3. The ACEManager authentication functionality is done in plaintext XML to the web server. An attacker can listen to network traffic upstream from the device to capitalize on this vulnerability.
CVE-2018-4064 An exploitable unverified password change vulnerability exists in the ACEManager upload.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. A specially crafted HTTP request can cause a unverified device configuration change, resulting in an unverified change of the user password on the device. An attacker can make an authenticated HTTP request to trigger this vulnerability.
CVE-2018-3955 An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.
CVE-2018-3951 An exploitable remote code execution vulnerability exists in the HTTP header-parsing function of the TP-Link TL-R600VPN HTTP Server. A specially crafted HTTP request can cause a buffer overflow, resulting in remote code execution on the device. An attacker can send an authenticated HTTP request to trigger this vulnerability.
CVE-2018-21062 An issue was discovered on Samsung mobile devices with N(7.x) and O(8.x) software. When biometric authentication is disabled, an attacker can view Streams content (e.g., a Gallery slideshow) of a locked Secure Folder via a connection to an external device. The Samsung ID is SVE-2018-11766 (August 2018).
CVE-2018-21033 A vulnerability in Hitachi Command Suite prior to 8.6.2-00, Hitachi Automation Director prior to 8.6.2-00 and Hitachi Infrastructure Analytics Advisor prior to 4.2.0-00 allow authenticated remote users to load an arbitrary Cascading Style Sheets (CSS) token sequence. Hitachi Command Suite includes Hitachi Device Manager, Hitachi Tiered Storage Manager, Hitachi Replication Manager, Hitachi Tuning Manager, Hitachi Global Link Manager and Hitachi Compute Systems Manager.
CVE-2018-21032 A vulnerability in Hitachi Command Suite prior to 8.7.1-00 and Hitachi Automation Director prior to 8.5.0-00 allow authenticated remote users to expose technical information through error messages. Hitachi Command Suite includes Hitachi Device Manager and Hitachi Compute Systems Manager.
CVE-2018-20219 An issue was discovered on Teracue ENC-400 devices with firmware 2.56 and below. After successful authentication, the device sends an authentication cookie to the end user such that they can access the devices web administration panel. This token is hard-coded to a string in the source code (/usr/share/www/check.lp file). By setting this cookie in a browser, an attacker is able to maintain access to every ENC-400 device without knowing the password, which results in authentication bypass. Even if a user changes the password on the device, this token is static and unchanged.
CVE-2018-19981 Amazon AWS SDK <=2.8.5 for Android uses Android SharedPreferences to store plain text AWS STS Temporary Credentials retrieved by AWS Cognito Identity Service. An attacker can use these credentials to create authenticated and/or authorized requests. Note that the attacker must have "root" privilege access to the Android filesystem in order to exploit this vulnerability (i.e. the device has been compromised, such as disabling or bypassing Android's fundamental security mechanisms).
CVE-2018-19978 A buffer overflow vulnerability in the DHCP and PPPOE configuration interface of the Auerswald COMfort 1200 IP phone 3.4.4.1-10589 allows a remote attacker (authenticated as simple user in the same network as the device) to trigger remote code execution via a POST request (ManufacturerName parameter) to the web server on the device. The web server is running with root privileges and the injected code will also run with root privileges.
CVE-2018-19977 A command injection (missing input validation, escaping) in the ftp upgrade configuration interface on the Auerswald COMfort 1200 IP phone 3.4.4.1-10589 allows an authenticated remote attacker (simple user) -- in the same network as the device -- to trigger OS commands (like starting telnetd or opening a reverse shell) via a POST request to the web server.
CVE-2018-19009 Pilz PNOZmulti Configurator prior to version 10.9 allows an authenticated attacker with local access to the system containing the PNOZmulti Configurator software to view sensitive credential data in clear-text. This sensitive data is applicable to only the PMI m107 diag HMI device. An attacker with access to this sensitive data and physical access to the PMI m107 diag can modify data on the HMI device.
CVE-2018-18995 Pluto Safety PLC Gateway Ethernet devices ABB GATE-E1 and GATE-E2 all versions do not allow authentication to be configured on administrative telnet or web interfaces, which could enable various effects vectors, including conducting device resets, reading or modifying registers, and changing configuration settings such as IP addresses.
CVE-2018-18881 A Denial of Service (DOS) issue was discovered in ControlByWeb X-320M-I Web-Enabled Instrumentation-Grade Data Acquisition module 1.05 with firmware revision v1.05. An authenticated user can configure invalid network settings, stopping TCP based communications to the device. A physical factory reset is required to restore the device to an operational state.
CVE-2018-18877 In firmware version MS_2.6.9900 of Columbia Weather MicroServer, an authenticated web user can access an alternative configuration page config_main.php that allows manipulation of the device.
CVE-2018-18871 Missing password verification in the web interface on Gigaset Maxwell Basic VoIP phones with firmware 2.22.7 would allow a remote attacker (in the same network as the device) to change the admin password without authentication (and without knowing the original password).
CVE-2018-18555 A sandbox escape issue was discovered in VyOS 1.1.8. It provides a restricted management shell for operator users to administer the device. By issuing various shell special characters with certain commands, an authenticated operator user can break out of the management shell and gain access to the underlying Linux shell. The user can then run arbitrary operating system commands with the privileges afforded by their account.
CVE-2018-18441 D-Link DCS series Wi-Fi cameras expose sensitive information regarding the device configuration. The affected devices include many of DCS series, such as: DCS-936L, DCS-942L, DCS-8000LH, DCS-942LB1, DCS-5222L, DCS-825L, DCS-2630L, DCS-820L, DCS-855L, DCS-2121, DCS-5222LB1, DCS-5020L, and many more. There are many affected firmware versions starting from 1.00 and above. The configuration file can be accessed remotely through: <Camera-IP>/common/info.cgi, with no authentication. The configuration file include the following fields: model, product, brand, version, build, hw_version, nipca version, device name, location, MAC address, IP address, gateway IP address, wireless status, input/output settings, speaker, and sensor settings.
CVE-2018-17922 Circontrol CirCarLife all versions prior to 4.3.1, the PAP credentials of the device are stored in clear text in a log file that is accessible without authentication.
CVE-2018-17918 Circontrol CirCarLife all versions prior to 4.3.1, authentication to the device can be bypassed by entering the URL of a specific page.
CVE-2018-17288 Kofax Front Office Server version 4.1.1.11.0.5212 (both Thin Client and Administration Console) suffers from multiple authenticated stored XSS vulnerabilities via the (1) "Filename" field in /Kofax/KFS/ThinClient/document/upload/ - (Thin Client) or (2) "DeviceName" field in /Kofax/KFS/Admin/DeviceService/device/ - (Administration Console).
CVE-2018-17283 Zoho ManageEngine OpManager before 12.3 Build 123196 does not require authentication for /oputilsServlet requests, as demonstrated by a /oputilsServlet?action=getAPIKey request that can be leveraged against Firewall Analyzer to add an admin user via /api/json/v2/admin/addUser or conduct a SQL Injection attack via the /api/json/device/setManaged name parameter.
CVE-2018-17153 It was discovered that the Western Digital My Cloud device before 2.30.196 is affected by an authentication bypass vulnerability. An unauthenticated attacker can exploit this vulnerability to authenticate as an admin user without needing to provide a password, thereby gaining full control of the device. (Whenever an admin logs into My Cloud, a server-side session is created that is bound to the user's IP address. After the session is created, it is possible to call authenticated CGI modules by sending the cookie username=admin in the HTTP request. The invoked CGI will check if a valid session is present and bound to the user's IP address.) It was found that it is possible for an unauthenticated attacker to create a valid session without a login. The network_mgr.cgi CGI module contains a command called "cgi_get_ipv6" that starts an admin session -- tied to the IP address of the user making the request -- if the additional parameter "flag" with the value "1" is provided. Subsequent invocation of commands that would normally require admin privileges now succeed if an attacker sets the username=admin cookie.
CVE-2018-16946 LG LNB*, LND*, LNU*, and LNV* smart network camera devices have broken access control. Attackers are able to download /updownload/t.report (aka Log & Report) files and download backup files (via download.php) without authenticating. These backup files contain user credentials and configuration information for the camera device. An attacker is able to discover the backup filename via reading the system logs or report data, or just by brute-forcing the backup filename pattern. It may be possible to authenticate to the admin account with the admin password.
CVE-2018-16706 LG SuperSign CMS allows TVs to be rebooted remotely without authentication via a direct HTTP request to /qsr_server/device/reboot on port 9080.
CVE-2018-16671 An issue was discovered in CIRCONTROL CirCarLife before 4.3. There is system software information disclosure due to lack of authentication for /html/device-id.
CVE-2018-16596 A stack-based buffer overflow in the LAN UPnP service running on UDP port 1900 of Swisscom Internet-Box (2, Standard, and Plus) prior to v09.04.00 and Internet-Box light prior to v08.05.02 allows remote code execution. No authentication is required to exploit this vulnerability. Sending a simple UDP packet to port 1900 allows an attacker to execute code on a remote device. However, this is only possible if the attacker is inside the LAN. Because of ASLR, the success rate is not 100% and leads instead to a DoS of the UPnP service. The remaining functionality of the Internet Box is not affected. A reboot of the Internet Box is necessary to attempt the exploit again.
CVE-2018-16495 In VOS user session identifier (authentication token) is issued to the browser prior to authentication but is not changed after the user successfully logs into the application. Failing to issue a new session ID following a successful login introduces the possibility for an attacker to set up a trap session on the device the victim is likely to login with.
CVE-2018-16219 A missing password verification in the web interface in AudioCodes 405HD VoIP phone with firmware 2.2.12 allows an remote attacker (in the same network as the device) to change the admin password without authentication via a POST request.
CVE-2018-16216 A command injection (missing input validation, escaping) in the monitoring or memory status web interface in AudioCodes 405HD (firmware 2.2.12) VoIP phone allows an authenticated remote attacker in the same network as the device to trigger OS commands (like starting telnetd or opening a reverse shell) via a POST request to the web server. In combination with another attack (unauthenticated password change), the attacker can circumvent the authentication requirement.
CVE-2018-15480 An issue was discovered in myStrom WiFi Switch V1 before 2.66, WiFi Switch V2 before 3.80, WiFi Switch EU before 3.80, WiFi Bulb before 2.58, WiFi LED Strip before 3.80, WiFi Button before 2.73, and WiFi Button Plus before 2.73. The cloud API had a hidden parameter, which allowed an authenticated user to reconfigure the server URL for a device registered to their account. In combination with an insecure device registration vulnerability, this allowed an attacker to reconfigure a maliciously registered device to their own rogue replica of the myStrom API and issue commands to the device, including firmware update commands.
CVE-2018-15479 An issue was discovered in myStrom WiFi Switch V1 before 2.66, WiFi Switch V2 before 3.80, WiFi Switch EU before 3.80, WiFi Bulb before 2.58, WiFi LED Strip before 3.80, WiFi Button before 2.73, and WiFi Button Plus before 2.73. Devices did not authenticate themselves to the cloud in device to cloud communication. This lack of device authentication allowed an attacker to impersonate any device by guessing or learning their MAC address.
CVE-2018-15465 A vulnerability in the authorization subsystem of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, but unprivileged (levels 0 and 1), remote attacker to perform privileged actions by using the web management interface. The vulnerability is due to improper validation of user privileges when using the web management interface. An attacker could exploit this vulnerability by sending specific HTTP requests via HTTPS to an affected device as an unprivileged user. An exploit could allow the attacker to retrieve files (including the running configuration) from the device or to upload and replace software images on the device.
CVE-2018-15459 A vulnerability in the administrative web interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to gain additional privileges on an affected device. The vulnerability is due to improper controls on certain pages in the web interface. An attacker could exploit this vulnerability by authenticating to the device with an administrator account and sending a crafted HTTP request. A successful exploit could allow the attacker to create additional Admin accounts with different user roles. An attacker could then use these accounts to perform actions within their scope. The attacker would need valid Admin credentials for the device. This vulnerability cannot be exploited to add a Super Admin account.
CVE-2018-15458 A vulnerability in the Shell Access Filter feature of Cisco Firepower Management Center (FMC), when used in conjunction with remote authentication, could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability occurs because the configuration of the Shell Access Filter, when used with a specific type of remote authentication, can cause a system file to have unbounded writes. An attacker could exploit this vulnerability by sending a steady stream of remote authentication requests to the appliance when the specific configuration is applied. Successful exploitation could allow the attacker to increase the size of a system log file so that it consumes most of the disk space. The lack of available disk space could lead to a DoS condition in which the device functions could operate abnormally, making the device unstable.
CVE-2018-15445 A vulnerability in the web-based management interface of Cisco Energy Management Suite Software could allow an authenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected device. The vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform arbitrary actions on a targeted device via a web browser and with the privileges of the user.
CVE-2018-15439 A vulnerability in the Cisco Small Business Switches software could allow an unauthenticated, remote attacker to bypass the user authentication mechanism of an affected device. The vulnerability exists because under specific circumstances, the affected software enables a privileged user account without notifying administrators of the system. An attacker could exploit this vulnerability by using this account to log in to an affected device and execute commands with full admin rights. Cisco has not released software updates that address this vulnerability. This advisory will be updated with fixed software information once fixed software becomes available. There is a workaround to address this vulnerability.
CVE-2018-15433 A vulnerability in the server backup function of Cisco Prime Infrastructure could allow an authenticated, remote attacker to view sensitive information. The vulnerability is due to the transmission of sensitive information as part of a GET request. An attacker could exploit this vulnerability by sending a GET request to a vulnerable device. A successful exploit could allow the attacker to view sensitive information.
CVE-2018-15432 A vulnerability in the server backup function of Cisco Prime Infrastructure could allow an authenticated, remote attacker to view sensitive information. The vulnerability is due to the transmission of sensitive information as part of a GET request. An attacker could exploit this vulnerability by sending a GET request to a vulnerable device. A successful exploit could allow the attacker to view sensitive information.
CVE-2018-15425 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device with the privileges of the web server.
CVE-2018-15424 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device with the privileges of the web server.
CVE-2018-15376 A vulnerability in the embedded test subsystem of Cisco IOS Software for Cisco 800 Series Industrial Integrated Services Routers could allow an authenticated, local attacker to write arbitrary values to arbitrary locations in the memory space of an affected device. The vulnerability is due to the presence of certain test commands that were intended to be available only in internal development builds of the affected software. An attacker could exploit this vulnerability by using these commands on an affected device. A successful exploit could allow the attacker to write arbitrary values to arbitrary locations in the memory space of the affected device.
CVE-2018-15375 A vulnerability in the embedded test subsystem of Cisco IOS Software for Cisco 800 Series Industrial Integrated Services Routers could allow an authenticated, local attacker to write arbitrary values to arbitrary locations in the memory space of an affected device. The vulnerability is due to the presence of certain test commands that were intended to be available only in internal development builds of the affected software. An attacker could exploit this vulnerability by using these commands on an affected device. A successful exploit could allow the attacker to write arbitrary values to arbitrary locations in the memory space of the affected device.
CVE-2018-15374 A vulnerability in the Image Verification feature of Cisco IOS XE Software could allow an authenticated, local attacker to install a malicious software image or file on an affected device. The vulnerability is due to the affected software improperly verifying digital signatures for software images and files that are uploaded to a device. An attacker could exploit this vulnerability by uploading a malicious software image or file to an affected device. A successful exploit could allow the attacker to bypass digital signature verification checks for software images and files and install a malicious software image or file on the affected device.
CVE-2018-15372 A vulnerability in the MACsec Key Agreement (MKA) using Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) functionality of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to bypass authentication and pass traffic through a Layer 3 interface of an affected device. The vulnerability is due to a logic error in the affected software. An attacker could exploit this vulnerability by connecting to and passing traffic through a Layer 3 interface of an affected device, if the interface is configured for MACsec MKA using EAP-TLS and is running in access-session closed mode. A successful exploit could allow the attacker to bypass 802.1x network access controls and gain access to the network.
CVE-2018-15371 A vulnerability in the shell access request mechanism of Cisco IOS XE Software could allow an authenticated, local attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by requesting access to the root shell of an affected device, after the shell access feature has been enabled. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.
CVE-2018-15368 A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent modifications to the underlying Linux filesystem on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device.
CVE-2018-14997 The Leagoo P1 Android device with a build fingerprint of sp7731c_1h10_32v4_bird:6.0/MRA58K/android.20170629.214736:user/release-keys contains the android framework (i.e., system_server) with a package name of android that has been modified by Leagoo or another entity in the supply chain. The system_server process in the core Android package has an exported broadcast receiver that allows any app co-located on the device to programmatically initiate the taking of a screenshot and have the resulting screenshot be written to external storage. The taking of a screenshot is not transparent to the user; the device has a screen animation as the screenshot is taken and there is a notification indicating that a screenshot occurred. If the attacking app also requests the EXPAND_STATUS_BAR permission, it can wake the device up using certain techniques and expand the status bar to take a screenshot of the user's notifications even if the device has an active screen lock. The notifications may contain sensitive data such as text messages used in two-factor authentication. The system_server process that provides this capability cannot be disabled, as it is part of the Android framework. The notification can be removed by a local Denial of Service (DoS) attack to reboot the device.
CVE-2018-14983 The Sony Xperia L1 Android device with a build fingerprint of Sony/G3313/G3313:7.0/43.0.A.6.49/2867558199:user/release-keys contains the android framework (i.e., system_server) with a package name of android (versionCode=24, versionName=7.0) that has been modified by Sony or another entity in the supply chain. The system_server process in the core android package has an exported broadcast receiver that allows any app co-located on the device to programmatically initiate the taking of a screenshot and have the resulting screenshot be written to external storage. The taking of a screenshot is not transparent to the user; the device has a screen animation as the screenshot is taken and there is a notification indicating that a screenshot occurred. If the attacking app also requests the EXPAND_STATUS_BAR permission, it can wake the device up using certain techniques and expand the status bar to take a screenshot of the user's notifications even if the device has an active screen lock. The notifications may contain sensitive data such as text messages used in two-factor authentication. The system_server process that provides this capability cannot be disabled, as it is part of the Android framework. The notification can be removed by a local Denial of Service (DoS) attack to reboot the device.
CVE-2018-14980 The ASUS ZenFone 3 Max Android device with a build fingerprint of asus/US_Phone/ASUS_X008_1:7.0/NRD90M/US_Phone-14.14.1711.92-20171208:user/release-keys contains the android framework (i.e., system_server) with a package name of android (versionCode=24, versionName=7.0) that has been modified by ASUS or another entity in the supply chain. The system_server process in the core android package has an exported broadcast receiver that allows any app co-located on the device to programmatically initiate the taking of a screenshot and have the resulting screenshot be written to external storage (i.e., sdcard). The taking of a screenshot is not transparent to the user; the device has a screen animation as the screenshot is taken and there is a notification indicating that a screenshot occurred. If the attacking app also requests the EXPAND_STATUS_BAR permission, it can wake the device up using certain techniques and expand the status bar to take a screenshot of the user's notifications even if the device has an active screen lock. The notifications may contain sensitive data such as text messages used in two-factor authentication. The system_server process that provides this capability cannot be disabled, as it is part of the Android framework. The notification can be removed by a local Denial of Service (DoS) attack to reboot the device.
CVE-2018-14934 The Bluetooth subsystem on Polycom Trio devices with software before 5.5.4 has Incorrect Access Control. An attacker can connect without authentication and subsequently record audio from the device microphone.
CVE-2018-14785 NetComm Wireless G LTE Light Industrial M2M Router (NWL-25) with firmware 2.0.29.11 and prior. The directory of the device is listed openly without authentication.
CVE-2018-14705 In Drobo 5N2 4.0.5, all optional applications lack any form of authentication/authorization validation. As a result, any user capable of accessing the device over the network may interact with and control these applications. This not only poses a severe risk to the availability of these applications, but also poses severe risks to the confidentiality and integrity of data stored within the applications and the device itself.
CVE-2018-13816 A vulnerability has been identified in TIM 1531 IRC (All version < V2.0). The devices was missing proper authentication on port 102/tcp, although configured. Successful exploitation requires an attacker to be able to send packets to port 102/tcp of the affected device. No user interaction and no user privileges are required to exploit the vulnerability. At the time of advisory publication no public exploitation of this vulnerability was known.
CVE-2018-13814 A vulnerability has been identified in SIMATIC HMI Comfort Panels 4" - 22" (All versions < V14), SIMATIC HMI Comfort Outdoor Panels 7" & 15" (All versions < V14), SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V14), SIMATIC WinCC Runtime Advanced (All versions < V14), SIMATIC WinCC Runtime Professional (All versions < V14), SIMATIC WinCC (TIA Portal) (All versions < V14), SIMATIC HMI Classic Devices (TP/MP/OP/MP Mobile Panel) (All versions). The integrated web server (port 80/tcp and port 443/tcp) of the affected devices could allow an attacker to inject HTTP headers. An attacker must trick a valid user who is authenticated to the device into clicking on a malicious link to exploit the vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.
CVE-2018-13813 A vulnerability has been identified in SIMATIC HMI Comfort Panels 4" - 22" (All versions < V15 Update 4), SIMATIC HMI Comfort Outdoor Panels 7" & 15" (All versions < V15 Update 4), SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15 Update 4), SIMATIC WinCC Runtime Advanced (All versions < V15 Update 4), SIMATIC WinCC Runtime Professional (All versions < V15 Update 4), SIMATIC WinCC (TIA Portal) (All versions < V15 Update 4), SIMATIC HMI Classic Devices (TP/MP/OP/MP Mobile Panel) (All versions). The webserver of affected HMI devices may allow URL redirections to untrusted websites. An attacker must trick a valid user who is authenticated to the device into clicking on a malicious link to exploit the vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.
CVE-2018-13812 A vulnerability has been identified in SIMATIC HMI Comfort Panels 4" - 22" (All versions < V15 Update 4), SIMATIC HMI Comfort Outdoor Panels 7" & 15" (All versions < V15 Update 4), SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15 Update 4), SIMATIC WinCC Runtime Advanced (All versions < V15 Update 4), SIMATIC WinCC Runtime Professional (All versions < V15 Update 4), SIMATIC WinCC (TIA Portal) (All versions < V15 Update 4), SIMATIC HMI Classic Devices (TP/MP/OP/MP Mobile Panel) (All versions). A directory traversal vulnerability could allow to download arbitrary files from the device. The security vulnerability could be exploited by an attacker with network access to the integrated web server. No user interaction and no authentication is required to exploit the vulnerability. The vulnerability impacts the confidentiality of the device. At the time of advisory publication no public exploitation of this security vulnerability was known.
CVE-2018-13802 A vulnerability has been identified in ROX II (All versions < V2.12.1). An authenticated attacker with a high-privileged user account access via SSH could circumvent restrictions in place and execute arbitrary operating system commands. Successful exploitation requires that the attacker has network access to the SSH interface in on port 22/tcp. The attacker must be authenticated to exploit the vulnerability. The vulnerability could allow an attacker to execute arbitrary code on the device.
CVE-2018-13800 A vulnerability has been identified in SIMATIC S7-1200 CPU family version 4 (All versions < V4.2.3). The web interface could allow a Cross-Site Request Forgery (CSRF) attack if an unsuspecting user is tricked into accessing a malicious link. Successful exploitation requires user interaction by a legitimate user, who must be authenticated to the web interface. A successful attack could allow an attacker to trigger actions via the web interface that the legitimate user is allowed to perform. This could allow the attacker to read or modify parts of the device configuration.
CVE-2018-13371 An external control of system vulnerability in FortiOS may allow an authenticated, regular user to change the routing settings of the device via connecting to the ZebOS component.
CVE-2018-12257 An issue was discovered on Momentum Axel 720P 5.1.8 devices. There is Authenticated Custom Firmware Upgrade via DNS Hijacking. An authenticated root user with CLI access is able to remotely upgrade firmware to a custom image due to lack of SSL validation by changing the nameservers in /etc/resolv.conf to the attacker's server, and serving the expected HTTPS response containing new firmware for the device to download.
CVE-2018-11448 A vulnerability has been identified in SCALANCE M875 (All versions). The web interface on port 443/tcp could allow a stored Cross-Site Scripting (XSS) attack if an unsuspecting user is tricked into accessing a malicious link. Successful exploitation requires that the attacker has access to the web interface of an affected device. The attacker must be authenticated as administrative user on the web interface. Afterwards, a legitimate user must access the web interface. A successful attack could allow an attacker to execute malicious code in the browser of a legitimate user. At the time of advisory publication no public exploitation of this security vulnerability was known.
CVE-2018-11447 A vulnerability has been identified in SCALANCE M875 (All versions). The web interface on port 443/tcp could allow a Cross-Site Request Forgery (CSRF) attack if an unsuspecting user is tricked into accessing a malicious link. Successful exploitation requires user interaction by an legitimate user, who must be authenticated to the web interface as administrative user. A successful attack could allow an attacker to interact with the web interface as an administrative user. This could allow the attacker to read or modify the device configuration, or to exploit other vulnerabilities that require authentication as administrative user. At the time of advisory publication no public exploitation of this security vulnerability was known.
CVE-2018-11422 Moxa OnCell G3100-HSPA Series version 1.6 Build 17100315 and prior use a proprietary configuration protocol that does not provide confidentiality, integrity, and authenticity security controls. All information is sent in plain text, and can be intercepted and modified. Any commands (including device reboot, configuration download or upload, or firmware upgrade) are accepted and executed by the device without authentication.
CVE-2018-10923 It was found that the "mknod" call derived from mknod(2) can create files pointing to devices on a glusterfs server node. An authenticated attacker could use this to create an arbitrary device and read data from any device attached to the glusterfs server node.
CVE-2018-10823 An issue was discovered on D-Link DWR-116 through 1.06, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. An authenticated attacker may execute arbitrary code by injecting the shell command into the chkisg.htm page Sip parameter. This allows for full control over the device internals.
CVE-2018-10561 An issue was discovered on Dasan GPON home routers. It is possible to bypass authentication simply by appending "?images" to any URL of the device that requires authentication, as demonstrated by the /menu.html?images/ or /GponForm/diag_FORM?images/ URI. One can then manage the device.
CVE-2018-10239 A privilege escalation vulnerability in the "support access" feature on Infoblox NIOS 6.8 through 8.4.1 could allow a locally authenticated administrator to temporarily gain additional privileges on an affected device and perform actions within the super user scope. The vulnerability is due to a weakness in the "support access" password generation algorithm. A locally authenticated administrative user may be able to exploit this vulnerability if the "support access" feature is enabled, they know the support access code for the current session, and they know the algorithm to generate the support access password from the support access code. "Support access" is disabled by default. When enabled, the access will be automatically disabled (and support access code will expire) after the 24 hours.
CVE-2018-0663 Multiple I-O DATA network camera products (TS-WRLP firmware Ver.1.09.04 and earlier, TS-WRLA firmware Ver.1.09.04 and earlier, TS-WRLP/E firmware Ver.1.09.04 and earlier) use hardcoded credentials which may allow an remote authenticated attacker to execute arbitrary OS commands on the device via unspecified vector.
CVE-2018-0554 Buffalo WZR-1750DHP2 Ver.2.30 and earlier allows an attacker to bypass authentication and execute arbitrary commands on the device via unspecified vectors.
CVE-2018-0521 Buffalo WXR-1900DHP2 firmware Ver.2.48 and earlier allows an attacker to bypass authentication and execute arbitrary commands on the device via unspecified vectors.
CVE-2018-0512 Devices with IP address setting tool "MagicalFinder" provided by I-O DATA DEVICE, INC. allow authenticated attackers to execute arbitrary OS commands via unspecified vectors.
CVE-2018-0482 A vulnerability in the web-based management interface of Cisco Prime Network Control System could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web interface of the affected system. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a malicious link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the web-based management interface or allow the attacker to access sensitive browser-based information.
CVE-2018-0481 A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exist because the affected software improperly sanitizes command arguments, failing to prevent access to certain internal data structures on an affected device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain custom arguments. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device.
CVE-2018-0477 A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exist because the affected software improperly sanitizes command arguments, failing to prevent access to certain internal data structures on an affected device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain custom arguments. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device.
CVE-2018-0472 A vulnerability in the IPsec driver code of multiple Cisco IOS XE Software platforms and the Cisco ASA 5500-X Series Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to improper processing of malformed IPsec Authentication Header (AH) or Encapsulating Security Payload (ESP) packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to be processed by an affected device. An exploit could allow the attacker to cause a reload of the affected device.
CVE-2018-0463 A vulnerability in the Cisco Network Plug and Play server component of Cisco Network Services Orchestrator (NSO) could allow an unauthenticated, remote attacker to gain unauthorized access to configuration data that is stored on an affected NSO system. The vulnerability exists because the Network Plug and Play component performs incomplete validation when configured to use secure unique device identifiers (SUDI) for authentication. An attacker who controls a Cisco device that supports SUDI authentication and has connectivity to an affected NSO system could exploit this vulnerability. The attacker would need to leverage information about the devices that are being registered on the NSO server to send crafted Cisco Network Plug and Play authentication packets to an affected system. A successful exploit could allow the attacker to gain unauthorized access to configuration data for devices that will be managed by the NSO system.
CVE-2018-0456 A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application of an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.
CVE-2018-0453 A vulnerability in the Sourcefire tunnel control channel protocol in Cisco Firepower System Software running on Cisco Firepower Threat Defense (FTD) sensors could allow an authenticated, local attacker to execute specific CLI commands with root privileges on the Cisco Firepower Management Center (FMC), or through Cisco FMC on other Firepower sensors and devices that are controlled by the same Cisco FMC. To send the commands, the attacker must have root privileges for at least one affected sensor or the Cisco FMC. The vulnerability exists because the affected software performs insufficient checks for certain CLI commands, if the commands are executed via a Sourcefire tunnel connection. An attacker could exploit this vulnerability by authenticating with root privileges to a Firepower sensor or Cisco FMC, and then sending specific CLI commands to the Cisco FMC or through the Cisco FMC to another Firepower sensor via the Sourcefire tunnel connection. A successful exploit could allow the attacker to modify device configurations or delete files on the device that is running Cisco FMC Software or on any Firepower device that is managed by Cisco FMC.
CVE-2018-0451 A vulnerability in the web-based management interface of Cisco Tetration Analytics could allow an authenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected device. The vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to follow a customized link. A successful exploit could allow the attacker to perform arbitrary actions on an affected device by using a web browser and with the privileges of the user.
CVE-2018-0449 A vulnerability in the Cisco Jabber Client Framework (JCF) software, installed as part of the Cisco Jabber for Mac client, could allow an authenticated, local attacker to corrupt arbitrary files on an affected device that has elevated privileges. The vulnerability exists due to insecure directory permissions set on a JCF created directory. An authenticated attacker with the ability to access an affected directory could create a hard link to an arbitrary location on the affected system. An attacker could convince another user that has administrative privileges to perform an install or update the Cisco Jabber for Mac client to perform such actions, allowing files to be created in an arbitrary location on the disk or an arbitrary file to be corrupted when it is appended to or overwritten.
CVE-2018-0433 A vulnerability in the command-line interface (CLI) in the Cisco SD-WAN Solution could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.
CVE-2018-0432 A vulnerability in the error reporting feature of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to gain elevated privileges on an affected device. The vulnerability is due to a failure to properly validate certain parameters included within the error reporting application configuration. An attacker could exploit this vulnerability by sending a crafted command to the error reporting feature. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device.
CVE-2018-0431 A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of command input by the affected software. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.
CVE-2018-0430 A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of command input by the affected software. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.
CVE-2018-0428 A vulnerability in the account management subsystem of Cisco Web Security Appliance (WSA) could allow an authenticated, local attacker to elevate privileges to root. The attacker must authenticate with valid administrator credentials. The vulnerability is due to improper implementation of access controls. An attacker could exploit this vulnerability by authenticating to the device as a specific user to gain the information needed to elevate privileges to root in a separate login shell. A successful exploit could allow the attacker to escape the CLI subshell and execute system-level commands on the underlying operating system as root. Cisco Bug IDs: CSCvj93548.
CVE-2018-0425 A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to gain access to sensitive information. The vulnerability is due to improper access control to files within the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to gain access to sensitive configuration information, including user authentication credentials.
CVE-2018-0424 A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input to scripts by the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the root user.
CVE-2018-0422 A vulnerability in the folder permissions of Cisco Webex Meetings client for Windows could allow an authenticated, local attacker to modify locally stored files and execute code on a targeted device with the privilege level of the user. The vulnerability is due to folder permissions that grant a user the permission to read, write, and execute files in the Webex folders. An attacker could exploit this vulnerability to write malicious files to the Webex client directory, affecting all other users of the targeted device. A successful exploit could allow a user to execute commands with elevated privileges. Attacks on single-user systems are less likely to occur, as the attack must be carried out by the user on the user's own system. Multiuser systems have a higher risk of exploitation because folder permissions have an impact on all users of the device. For an attacker to exploit this vulnerability successfully, a second user must execute the locally installed malicious file to allow remote code execution to occur.
CVE-2018-0420 A vulnerability in the web-based interface of Cisco Wireless LAN Controller Software could allow an authenticated, remote attacker to view sensitive information. The issue is due to improper sanitization of user-supplied input in HTTP request parameters that describe filenames and pathnames. An attacker could exploit this vulnerability by using directory traversal techniques to submit a path to a desired file location. A successful exploit could allow the attacker to view system files on the targeted device, which may contain sensitive information.
CVE-2018-0417 A vulnerability in TACACS authentication with Cisco Wireless LAN Controller (WLC) Software could allow an authenticated, local attacker to perform certain operations within the GUI that are not normally available to that user on the CLI. The vulnerability is due to incorrect parsing of a specific TACACS attribute received in the TACACS response from the remote TACACS server. An attacker could exploit this vulnerability by authenticating via TACACS to the GUI on the affected device. A successful exploit could allow an attacker to create local user accounts with administrative privileges on an affected WLC and execute other commands that are not allowed from the CLI and should be prohibited.
CVE-2018-0415 A vulnerability in the implementation of Extensible Authentication Protocol over LAN (EAPOL) functionality in Cisco Small Business 100 Series Wireless Access Points and Cisco Small Business 300 Series Wireless Access Points could allow an authenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the improper processing of certain EAPOL frames. An attacker could exploit this vulnerability by sending a stream of crafted EAPOL frames to an affected device. A successful exploit could allow the attacker to force the access point (AP) to disassociate all the associated stations (STAs) and to disallow future, new association requests. Cisco Bug IDs: CSCvj97472.
CVE-2018-0408 A vulnerability in the web-based management interface of Cisco Small Business 300 Series (Sx300) Managed Switches could allow an authenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvi87330.
CVE-2018-0407 A vulnerability in the web-based management interface of Cisco Small Business 300 Series (Sx300) Managed Switches could allow an authenticated, remote attacker to conduct a persistent cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvi87326.
CVE-2018-0391 A vulnerability in the password change function of Cisco Prime Collaboration Provisioning could allow an authenticated, remote attacker to cause the system to become inoperable. The vulnerability is due to insufficient validation of a password change request. An attacker could exploit this vulnerability by changing a specific administrator account password. A successful exploit could allow the attacker to cause the affected device to become inoperable, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 12.2 and prior. Cisco Bug IDs: CSCvd86586.
CVE-2018-0381 A vulnerability in the Cisco Aironet Series Access Points (APs) software could allow an authenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a deadlock condition that may occur when an affected AP attempts to dequeue aggregated traffic that is destined to an attacker-controlled wireless client. An attacker who can successfully transition between multiple Service Set Identifiers (SSIDs) hosted on the same AP while replicating the required traffic patterns could trigger the deadlock condition. A watchdog timer that detects the condition will trigger a reload of the device, resulting in a DoS condition while the device restarts.
CVE-2018-0368 A vulnerability in Cisco Digital Network Architecture (DNA) Center could allow an authenticated, local attacker to access sensitive information on an affected system. The vulnerability is due to insufficient security restrictions imposed by the affected software. An attacker could exploit this vulnerability by accessing unprotected log files. A successful exploit could allow the attacker to access sensitive log files, which may include system credentials, on the affected device. Cisco Bug IDs: CSCvi22400.
CVE-2018-0362 A vulnerability in BIOS authentication management of Cisco 5000 Series Enterprise Network Compute System and Cisco Unified Computing (UCS) E-Series Servers could allow an unauthenticated, local attacker to bypass the BIOS authentication and execute actions as an unprivileged user. The vulnerability is due to improper security restrictions that are imposed by the affected system. An attacker could exploit this vulnerability by submitting an empty password value to an affected device's BIOS authentication prompt. An exploit could allow the attacker to have access to a restricted set of user-level BIOS commands. Cisco Bug IDs: CSCvh83260.
CVE-2018-0352 A vulnerability in the Disk Check Tool (disk-check.sh) for Cisco Wide Area Application Services (WAAS) Software could allow an authenticated, local attacker to elevate their privilege level to root. The attacker must have valid user credentials with super user privileges (level 15) to log in to the device. The vulnerability is due to insufficient validation of script files executed in the context of the Disk Check Tool. An attacker could exploit this vulnerability by replacing one script file with a malicious script file while the affected tool is running. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device. Cisco Bug IDs: CSCvi72673.
CVE-2018-0351 A vulnerability in the command-line tcpdump utility in the Cisco SD-WAN Solution could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the tcpdump utility. The attacker must be authenticated to access the tcpdump utility. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69751.
CVE-2018-0350 A vulnerability in the VPN subsystem configuration in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected parameter in a web page. The attacker must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69808, CSCvi69810, CSCvi69814, CSCvi69822, CSCvi69827, CSCvi69828, CSCvi69836.
CVE-2018-0349 A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the request admin-tech command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the request admin-tech command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69852, CSCvi69856.
CVE-2018-0348 A vulnerability in the CLI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the load command within the VPN subsystem. The attacker must be authenticated to access the affected CLI parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69866.
CVE-2018-0347 A vulnerability in the Zero Touch Provisioning (ZTP) subsystem of the Cisco SD-WAN Solution could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the affected parameter. The attacker must be authenticated to access the affected parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers. Cisco Bug IDs: CSCvi69906.
CVE-2018-0343 A vulnerability in the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary code with vmanage user privileges or cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient access restrictions to the HTTP management interface of the affected solution. An attacker could exploit this vulnerability by sending a malicious HTTP request to the affected management service through an authenticated device. A successful exploit could allow the attacker to execute arbitrary code with vmanage user privileges or stop HTTP services on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69976.
CVE-2018-0342 A vulnerability in the configuration and monitoring service of the Cisco SD-WAN Solution could allow an authenticated, local attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete bounds checks for data that is provided by the configuration and monitoring service of the affected solution. An attacker could exploit this vulnerability by sending malicious data to the vDaemon listening service on an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected device, which could allow the attacker to execute arbitrary code with root privileges on the device or cause the vDaemon listening service to reload and result in a DoS condition on the device. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi70003.
CVE-2018-0337 A vulnerability in the role-based access-checking mechanisms of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on an affected device. The vulnerability exists because the affected software lacks proper input and validation checks for certain file systems. An attacker could exploit this vulnerability by issuing crafted commands in the CLI of an affected device. A successful exploit could allow the attacker to cause other users to execute unwanted, arbitrary commands on the affected device. Cisco Bug IDs: CSCvd06339, CSCvd15698, CSCvd36108, CSCvf52921, CSCvf52930, CSCvf52953, CSCvf52976.
CVE-2018-0324 A vulnerability in the CLI of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, high-privileged, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command parameters in the CLI parser. An attacker could exploit this vulnerability by invoking a vulnerable CLI command with crafted malicious parameters. An exploit could allow the attacker to execute arbitrary commands with a non-root user account on the underlying Linux operating system of the affected device. Cisco Bug IDs: CSCvi09723.
CVE-2018-0323 A vulnerability in the web management interface of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to conduct a path traversal attack on a targeted system. The vulnerability is due to insufficient validation of web request parameters. An attacker who has access to the web management interface of the affected application could exploit this vulnerability by sending a malicious web request to the affected device. A successful exploit could allow the attacker to access sensitive information on the affected system. Cisco Bug IDs: CSCvh99631.
CVE-2018-0322 A vulnerability in the web management interface of Cisco Prime Collaboration Provisioning (PCP) could allow an authenticated, remote attacker to modify sensitive data that is associated with arbitrary accounts on an affected device. The vulnerability is due to a failure to enforce access restrictions on the Help Desk and User Provisioning roles that are assigned to authenticated users. This failure could allow an authenticated attacker to modify critical attributes of higher-privileged accounts on the device. A successful exploit could allow the attacker to gain elevated privileges on the device. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 12.1 and prior. Cisco Bug IDs: CSCvd61779.
CVE-2018-0315 A vulnerability in the authentication, authorization, and accounting (AAA) security services of Cisco IOS XE Software could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device or cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect memory operations that the affected software performs when the software parses a username during login authentication. An attacker could exploit this vulnerability by attempting to authenticate to an affected device. A successful exploit could allow the attacker to execute arbitrary code on the affected device or cause the affected device to reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are running Cisco IOS XE Software Release Fuji 16.7.1 or Fuji 16.8.1 and are configured to use AAA for login authentication. Cisco Bug IDs: CSCvi25380.
CVE-2018-0309 A vulnerability in the implementation of a specific CLI command and the associated Simple Network Management Protocol (SNMP) MIB for Cisco NX-OS (in standalone NX-OS mode) on Cisco Nexus 3000 and 9000 Series Switches could allow an authenticated, remote attacker to exhaust system memory on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect implementation of the CLI command, resulting in a failure to free all allocated memory upon completion. An attacker could exploit this vulnerability by authenticating to the affected device and repeatedly issuing a specific CLI command or sending a specific SNMP poll request for a specific Object Identifier (OID). A successful exploit could allow the attacker to cause the IP routing process to restart or to cause a device reset, resulting in a DoS condition. Cisco Bug IDs: CSCvf23136.
CVE-2018-0307 A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker, authenticated as a privileged user, to execute arbitrary commands with root privileges. Note: On products that support multiple virtual device contexts (VDC), this vulnerability could allow an attacker to access files from any VDC. This vulnerability affects Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51704, CSCve91749, CSCve91768.
CVE-2018-0306 A vulnerability in the CLI parser of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device. Note: This vulnerability requires that any feature license is uploaded to the device. The vulnerability does not require that the license be used. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51693, CSCve91634, CSCve91659, CSCve91663.
CVE-2018-0302 A vulnerability in the CLI parser of Cisco FXOS Software and Cisco UCS Fabric Interconnect Software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to incorrect input validation in the CLI parser subsystem. An attacker could exploit this vulnerability by exceeding the expected length of user input. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61099, CSCvb86743.
CVE-2018-0300 A vulnerability in the process of uploading new application images to Cisco FXOS on the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker using path traversal techniques to create or overwrite arbitrary files on an affected device. The vulnerability is due to insufficient validation during the application image upload process. An attacker could exploit this vulnerability by creating an application image containing malicious code and installing the image on the affected device using the CLI or web-based user interface (web UI). These actions occur prior to signature verification and could allow the attacker to create and execute arbitrary code with root privileges. Note: A missing or invalid signature in the application image will cause the upload process to fail, but does not prevent the exploit. Cisco Bug IDs: CSCvc21901.
CVE-2018-0299 A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco NX-OS on the Cisco Nexus 4000 Series Switch could allow an authenticated, remote attacker to cause the device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete validation of an SNMP poll request for a specific MIB. An attacker could exploit this vulnerability by sending a specific SNMP poll request to the targeted device. An exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvg10442.
CVE-2018-0296 A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. It is also possible on certain software releases that the ASA will not reload, but an attacker could view sensitive system information without authentication by using directory traversal techniques. The vulnerability is due to lack of proper input validation of the HTTP URL. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition or unauthenticated disclosure of information. This vulnerability applies to IPv4 and IPv6 HTTP traffic. This vulnerability affects Cisco ASA Software and Cisco Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 1000V Cloud Firewall, ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvi16029.
CVE-2018-0294 A vulnerability in the write-erase feature of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to configure an unauthorized administrator account for an affected device. The vulnerability exists because the affected software does not properly delete sensitive files when certain CLI commands are used to clear the device configuration and reload a device. An attacker could exploit this vulnerability by logging into an affected device as an administrative user and configuring an unauthorized account for the device. The account would not require a password for authentication and would be accessible only via a Secure Shell (SSH) connection to the device. A successful exploit could allow the attacker to configure an unauthorized account that has administrative privileges, does not require a password for authentication, and does not appear in the running configuration or the audit logs for the affected device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3500 Platform Switches, Nexus 4000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd13993, CSCvd34845, CSCvd34857, CSCvd34862, CSCvd34879, CSCve35753.
CVE-2018-0293 A vulnerability in role-based access control (RBAC) for Cisco NX-OS Software could allow an authenticated, remote attacker to execute CLI commands that should be restricted for a nonadministrative user. The attacker would have to possess valid user credentials for the device. The vulnerability is due to incorrect RBAC privilege assignment for certain CLI commands. An attacker could exploit this vulnerability by authenticating to a device as a nonadministrative user and executing specific commands from the CLI. An exploit could allow the attacker to run commands that should be restricted to administrative users. These commands could modify the configuration or boot image on the device. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd77904.
CVE-2018-0291 A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuw99630, CSCvg71290, CSCvj67977.
CVE-2018-0284 A vulnerability in the local status page functionality of the Cisco Meraki MR, MS, MX, Z1, and Z3 product lines could allow an authenticated, remote attacker to modify device configuration files. The vulnerability occurs when handling requests to the local status page. An exploit could allow the attacker to establish an interactive session to the device with elevated privileges. The attacker could then use the elevated privileges to further compromise the device or obtain additional configuration data from the device that is being exploited.
CVE-2018-0279 A vulnerability in the Secure Copy Protocol (SCP) server of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to access the shell of the underlying Linux operating system on the affected device. The vulnerability is due to improper input validation of command arguments. An attacker could exploit this vulnerability by using crafted arguments when opening a connection to the affected device. An exploit could allow the attacker to gain shell access with a non-root user account to the underlying Linux operating system on the affected device. Due to the system design, access to the Linux shell could allow execution of additional attacks that may have a significant impact on the affected system. This vulnerability affects Cisco devices that are running release 3.7.1, 3.6.3, or earlier releases of Cisco Enterprise NFV Infrastructure Software (NFVIS) when access to the SCP server is allowed on the affected device. Cisco NFVIS Releases 3.5.x and 3.6.x do allow access to the SCP server by default, while Cisco NFVIS Release 3.7.1 does not. Cisco Bug IDs: CSCvh25026.
CVE-2018-0275 A vulnerability in the support tunnel feature of Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to access the device's shell. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by tricking the device into unlocking the support user account and accessing the tunnel password and device serial number. A successful exploit could allow the attacker to run any system command with root access. This affects Cisco Identity Services Engine (ISE) software versions prior to 2.2.0.470. Cisco Bug IDs: CSCvf54409.
CVE-2018-0251 A vulnerability in the Web Server Authentication Required screen of the Clientless Secure Sockets Layer (SSL) VPN portal of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of that portal on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the portal or allow the attacker to access sensitive browser-based information. This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco ASA Software: 3000 Series Industrial Security Appliances, Adaptive Security Virtual Appliance (ASAv), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches, ASA Services Module for Cisco 7600 Series Routers. Cisco Bug IDs: CSCvh20742.
CVE-2018-0250 A vulnerability in Central Web Authentication (CWA) with FlexConnect Access Points (APs) for Cisco Aironet 1560, 1810, 1810w, 1815, 1830, 1850, 2800, and 3800 Series APs could allow an authenticated, adjacent attacker to bypass a configured FlexConnect access control list (ACL). The vulnerability is due to the AP ignoring the ACL download from the client during authentication. An attacker could exploit this vulnerability by connecting to the targeted device with a vulnerable configuration. A successful exploit could allow the attacker to bypass a configured client FlexConnect ACL. This vulnerability affects the following Cisco products if they are running a vulnerable release of Central Web Authentication with FlexConnect Access Points Software: Aironet 1560 Series Access Points, Aironet 1810 Series OfficeExtend Access Points, Aironet 1810w Series Access Points, Aironet 1815 Series Access Points, Aironet 1830 Series Access Points, Aironet 1850 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: Central Web Authentication with FlexConnect Access Points was an unsupported configuration until 8.5.100.0. Cisco Bug IDs: CSCve17756.
CVE-2018-0248 A vulnerability in the administrative GUI configuration feature of Cisco Wireless LAN Controller (WLC) Software could allow an aUTHENTICated, remote attacker to cause the device to reload unexpectedly during device configuration when the administrator is using this GUI, causing a denial of service (DoS) condition on an affected device. The attacker would need to have valid administrator credentials on the device. This vulnerability is due to incomplete input validation for unexpected configuration options that the attacker could submit while accessing the GUI configuration menus. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted user input when using the administrative GUI configuration feature. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Software versions prior to 8.3.150.0, 8.5.140.0, 8.8.111.0 are affected by this vulnerability.
CVE-2018-0229 A vulnerability in the implementation of Security Assertion Markup Language (SAML) Single Sign-On (SSO) authentication for Cisco AnyConnect Secure Mobility Client for Desktop Platforms, Cisco Adaptive Security Appliance (ASA) Software, and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. The authentication would need to be done by an unsuspecting third party, aka Session Fixation. The vulnerability exists because there is no mechanism for the ASA or FTD Software to detect that the authentication request originates from the AnyConnect client directly. An attacker could exploit this vulnerability by persuading a user to click a crafted link and authenticating using the company's Identity Provider (IdP). A successful exploit could allow the attacker to hijack a valid authentication token and use that to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. This vulnerability affects the Cisco AnyConnect Secure Mobility Client, and ASA Software and FTD Software configured for SAML 2.0-based SSO for AnyConnect Remote Access VPN that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvg65072, CSCvh87448.
CVE-2018-0221 A vulnerability in specific CLI commands for the Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to perform command injection to the underlying operating system or cause a hang or disconnect of the user session. The attacker needs valid administrator credentials for the device. The vulnerability is due to incomplete input validation of user input for certain CLI ISE configuration commands. An attacker could exploit this vulnerability by authenticating as an administrative user, issuing a specific CLI command, and entering crafted, malicious user input for the command parameters. An exploit could allow the attacker to perform command injection to the lower-level Linux operating system. It is also possible the attacker could cause the ISE user interface for this management session to hang or disconnect. Cisco Bug IDs: CSCvg95479.
CVE-2018-0220 A vulnerability in the web-based management interface of Cisco Videoscape AnyRes Live could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvg87525.
CVE-2018-0214 A vulnerability in certain CLI commands of Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to execute arbitrary commands on the host operating system with the privileges of the local user, aka Command Injection. These commands should have been restricted from this user. The vulnerability is due to insufficient input validation of CLI command user input. An attacker could exploit this vulnerability by authenticating to the targeted device and issuing a CLI command with crafted user input. A successful exploit could allow the attacker to execute arbitrary commands on the affected system that should be restricted. The attacker would need to have valid user credentials for the device. Cisco Bug IDs: CSCvf49844.
CVE-2018-0213 A vulnerability in the credential reset functionality for Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to gain elevated privileges. The vulnerability is due to a lack of proper input validation. An attacker could exploit this vulnerability by authenticating to the device and sending a crafted HTTP request. A successful exploit could allow the attacker to gain elevated privileges to access functionality that should be restricted. The attacker must have valid user credentials to the device to exploit this vulnerability. Cisco Bug IDs: CSCvf69753.
CVE-2018-0211 A vulnerability in specific CLI commands for the Cisco Identity Services Engine could allow an authenticated, local attacker to cause a denial of service (DoS) condition. The device may need to be manually rebooted to recover. The vulnerability is due to lack of proper input validation of the CLI user input for certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and issuing a crafted, malicious CLI command on the targeted device. A successful exploit could allow the attacker to cause a DoS condition. The attacker must have valid administrative privileges on the device to exploit this vulnerability. Cisco Bug IDs: CSCvf63414, CSCvh51992.
CVE-2018-0209 A vulnerability in the Simple Network Management Protocol (SNMP) subsystem communication channel through the Cisco 550X Series Stackable Managed Switches could allow an authenticated, remote attacker to cause the device to reload unexpectedly, causing a denial of service (DoS) condition. The device nay need to be manually reloaded to recover. The vulnerability is due to lack of proper input throttling of ingress SNMP traffic over an internal interface. An attacker could exploit this vulnerability by sending a crafted, heavy stream of SNMP traffic to the targeted device. An exploit could allow the attacker to cause the device to reload unexpectedly, causing a DoS condition. Cisco Bug IDs: CSCvg22135.
CVE-2018-0201 A vulnerability in Cisco Jabber Client Framework (JCF) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of an affected device. The vulnerability is due to improper neutralization of input during web page generation. An attacker could exploit this vulnerability by embedding media in instant messages. An exploit could allow the attacker to cause the recipient chat client to make outbound requests. Cisco Bug IDs: CSCve54001.
CVE-2018-0196 A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to write arbitrary files to the operating system of an affected device. The vulnerability is due to insufficient input validation of HTTP requests that are sent to the web UI of the affected software. An attacker could exploit this vulnerability by sending a malicious HTTP request to the web UI of the affected software. A successful exploit could allow the attacker to write arbitrary files to the operating system of an affected device. Cisco Bug IDs: CSCvb22645.
CVE-2018-0195 A vulnerability in the Cisco IOS XE Software REST API could allow an authenticated, remote attacker to bypass API authorization checks and use the API to perform privileged actions on an affected device. The vulnerability is due to insufficient authorization checks for requests that are sent to the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious request to an affected device via the REST API. A successful exploit could allow the attacker to selectively bypass authorization checks for the REST API of the affected software and use the API to perform privileged actions on an affected device. Cisco Bug IDs: CSCuz56428.
CVE-2018-0194 Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.
CVE-2018-0193 Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.
CVE-2018-0185 Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.
CVE-2018-0184 A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCve74432.
CVE-2018-0183 A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuv91356.
CVE-2018-0182 Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.
CVE-2018-0176 Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370.
CVE-2018-0169 Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370.
CVE-2018-0161 A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software running on certain models of Cisco Catalyst Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition, aka a GET MIB Object ID Denial of Service Vulnerability. The vulnerability is due to a condition that could occur when the affected software processes an SNMP read request that contains a request for the ciscoFlashMIB object ID (OID). An attacker could trigger this vulnerability by issuing an SNMP GET request for the ciscoFlashMIB OID on an affected device. A successful exploit could cause the affected device to restart due to a SYS-3-CPUHOG. This vulnerability affects the following Cisco devices if they are running a vulnerable release of Cisco IOS Software and are configured to use SNMP Version 2 (SNMPv2) or SNMP Version 3 (SNMPv3): Cisco Catalyst 2960-L Series Switches, Cisco Catalyst Digital Building Series Switches 8P, Cisco Catalyst Digital Building Series Switches 8U. Cisco Bug IDs: CSCvd89541.
CVE-2018-0160 A vulnerability in Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper management of memory resources, referred to as a double free. An attacker could exploit this vulnerability by sending crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. To exploit this vulnerability via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for an affected system. To exploit this vulnerability via SNMP Version 3, the attacker must know the user credentials for the affected system. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, have been configured to be queried over SNMP, and have Network Address Translation (NAT) enabled. Cisco Bug IDs: CSCve75818.
CVE-2018-0152 A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to gain elevated privileges on an affected device. The vulnerability exists because the affected software does not reset the privilege level for each web UI session. An attacker who has valid credentials for an affected device could exploit this vulnerability by remotely accessing a VTY line to the device. A successful exploit could allow the attacker to access an affected device with the privileges of the user who previously logged in to the web UI. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled and authentication, authorization, and accounting (AAA) authorization is not configured for EXEC sessions. The default state of the HTTP Server feature is version-dependent. This vulnerability was introduced in Cisco IOS XE Software Release 16.1.1. Cisco Bug IDs: CSCvf71769.
CVE-2018-0149 A vulnerability in the web-based management interface of Cisco Integrated Management Controller Supervisor Software and Cisco UCS Director Software could allow an authenticated, remote attacker to conduct a Document Object Model-based (DOM-based), stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the affected interface to click a malicious link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or allow the attacker to access sensitive browser-based information on the affected device. Cisco Bug IDs: CSCvh12994.
CVE-2018-0127 A vulnerability in the web interface of Cisco RV132W ADSL2+ Wireless-N VPN Routers and Cisco RV134W VDSL2 Wireless-AC VPN Routers could allow an unauthenticated, remote attacker to view configuration parameters for an affected device, which could lead to the disclosure of confidential information. The vulnerability is due to the absence of user authentication requirements for certain pages that are part of the web interface and contain confidential information for an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device and examining the HTTP response to the request. A successful exploit could allow the attacker to view configuration parameters, including the administrator password, for the affected device. Cisco Bug IDs: CSCvg92739, CSCvh60172.
CVE-2018-0123 A Path Traversal vulnerability in the diagnostic shell for Cisco IOS and IOS XE Software could allow an authenticated, local attacker to use certain diagnostic shell commands that can overwrite system files. These system files may be sensitive and should not be able to be overwritten by a user of the diagnostic shell. The vulnerability is due to lack of proper input validation for certain diagnostic shell commands. An attacker could exploit this vulnerability by authenticating to the device, entering the diagnostic shell, and providing crafted user input to commands at the local diagnostic shell CLI. Successful exploitation could allow the attacker to overwrite system files that should be restricted. Cisco Bug IDs: CSCvg41950.
CVE-2018-0119 A vulnerability in certain authentication controls in the account services of Cisco Spark could allow an authenticated, remote attacker to interact with and view information on an affected device that would normally be prohibited. The vulnerability is due to the improper display of user-account tokens generated in the system. An attacker could exploit this vulnerability by logging in to the device with a token in use by another account. Successful exploitation could allow the attacker to cause a partial impact to the device's confidentiality, integrity, and availability. Cisco Bug IDs: CSCvg05206.
CVE-2018-0099 A vulnerability in the web management GUI of the Cisco D9800 Network Transport Receiver could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of GUI command arguments. An attacker could exploit this vulnerability by injecting crafted arguments into a vulnerable GUI command. An exploit could allow the attacker to execute commands on the underlying BusyBox operating system. These commands are run at the privilege level of the authenticated user. The attacker needs valid device credentials for this attack. Cisco Bug IDs: CSCvg74691.
CVE-2018-0095 A vulnerability in the administrative shell of Cisco AsyncOS on Cisco Email Security Appliance (ESA) and Content Security Management Appliance (SMA) could allow an authenticated, local attacker to escalate their privilege level and gain root access. The attacker has to have a valid user credential with at least a privilege level of a guest user. The vulnerability is due to an incorrect networking configuration at the administrative shell CLI. An attacker could exploit this vulnerability by authenticating to the targeted device and issuing a set of crafted, malicious commands at the administrative shell. An exploit could allow the attacker to gain root access on the device. Cisco Bug IDs: CSCvb34303, CSCvb35726.
CVE-2018-0092 A vulnerability in the network-operator user role implementation for Cisco NX-OS System Software could allow an authenticated, local attacker to improperly delete valid user accounts. The network-operator role should not be able to delete other configured users on the device. The vulnerability is due to a lack of proper role-based access control (RBAC) checks for the actions that a user with the network-operator role is allowed to perform. An attacker could exploit this vulnerability by authenticating to the device with user credentials that give that user the network-operator role. Successful exploitation could allow the attacker to impact the integrity of the device by deleting configured user credentials. The attacker would need valid user credentials for the device. This vulnerability affects the following Cisco products running Cisco NX-OS System Software: Nexus 3000 Series Switches, Nexus 3600 Platform Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvg21120.
CVE-2018-0088 A vulnerability in one of the diagnostic test CLI commands on Cisco Industrial Ethernet 4010 Series Switches running Cisco IOS Software could allow an authenticated, local attacker to impact the stability of the device. This could result in arbitrary code execution or a denial of service (DoS) condition. The attacker has to have valid user credentials at privilege level 15. The vulnerability is due to a diagnostic test CLI command that allows the attacker to write to the device memory. An attacker could exploit this vulnerability by authenticating to the targeted device and issuing a specific diagnostic test command at the CLI. An exploit could allow the attacker to overwrite system memory locations, which could have a negative impact on the stability of the device. Cisco Bug IDs: CSCvf71150.
CVE-2018-0059 A persistent cross-site scripting vulnerability in the graphical user interface of ScreenOS may allow a remote authenticated user to inject web script or HTML and steal sensitive data and credentials from a web administration session, possibly tricking a follow-on administrative user to perform administrative actions on the device. Affected releases are Juniper Networks ScreenOS 6.3.0 versions prior to 6.3.0r26.
CVE-2018-0052 If RSH service is enabled on Junos OS and if the PAM authentication is disabled, a remote unauthenticated attacker can obtain root access to the device. RSH service is disabled by default on Junos. There is no documented CLI command to enable this service. However, an undocumented CLI command allows a privileged Junos user to enable RSH service and disable PAM, and hence expose the system to unauthenticated root access. When RSH is enabled, the device is listing to RSH connections on port 514. This issue is not exploitable on platforms where Junos release is based on FreeBSD 10+. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D75 on SRX Series; 14.1X53 versions prior to 14.1X53-D47 on QFX/EX Series; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D67 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 16.1 versions prior to 16.1R3-S9, 16.1R4-S9, 16.1R5-S4, 16.1R6-S4, 16.1R7; 16.2 versions prior to 16.2R2-S5; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S6, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D110, 17.2X75-D91; 17.3 versions prior to 17.3R1-S4, 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S3, 17.4R2; 18.2X75 versions prior to 18.2X75-D5.
CVE-2018-0025 When an SRX Series device is configured to use HTTP/HTTPS pass-through authentication services, a client sending authentication credentials in the initial HTTP/HTTPS session is at risk that these credentials may be captured during follow-on HTTP/HTTPS requests by a malicious actor through a man-in-the-middle attack or by authentic servers subverted by malicious actors. FTP, and Telnet pass-through authentication services are not affected. Affected releases are Juniper Networks SRX Series: 12.1X46 versions prior to 12.1X46-D67 on SRX Series; 12.3X48 versions prior to 12.3X48-D25 on SRX Series; 15.1X49 versions prior to 15.1X49-D35 on SRX Series.
CVE-2018-0011 A reflected cross site scripting (XSS) vulnerability in Junos Space may potentially allow a remote authenticated user to inject web script or HTML and steal sensitive data and credentials from a session, and to perform administrative actions on the Junos Space network management device.
CVE-2018-0008 An unauthenticated root login may allow upon reboot when a commit script is used. A commit script allows a device administrator to execute certain instructions during commit, which is configured under the [system scripts commit] stanza. Certain commit scripts that work without a problem during normal commit may cause unexpected behavior upon reboot which can leave the system in a state where root CLI login is allowed without a password due to the system reverting to a "safe mode" authentication state. Lastly, only logging in physically to the console port as root, with no password, will work. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D71 on SRX; 12.3X48 versions prior to 12.3X48-D55 on SRX; 14.1 versions prior to 14.1R9; 14.1X53 versions prior to 14.1X53-D40 on QFX, EX; 14.2 versions prior to 14.2R7-S9, 14.2R8; 15.1 versions prior to 15.1F5-S7, 15.1F6-S8, 15.1R5-S6, 15.1R6; 15.1X49 versions prior to 15.1X49-D110 on SRX; 15.1X53 versions prior to 15.1X53-D232 on QFX5200/5110; 15.1X53 versions prior to 15.1X53-D49, 15.1X53-D470 on NFX; 15.1X53 versions prior to 15.1X53-D65 on QFX10K; 16.1 versions prior to 16.1R2. No other Juniper Networks products or platforms are affected by this issue.
CVE-2018-0007 An unauthenticated network-based attacker able to send a maliciously crafted LLDP packet to the local segment, through a local segment broadcast, may be able to cause a Junos device to enter an improper boundary check condition allowing a memory corruption to occur, leading to a denial of service. Further crafted packets may be able to sustain the denial of service condition. Score: 6.5 MEDIUM (CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) Further, if the attacker is authenticated on the target device receiving and processing the malicious LLDP packet, while receiving the crafted packets, the attacker may be able to perform command or arbitrary code injection over the target device thereby elevating their permissions and privileges, and taking control of the device. Score: 7.8 HIGH (CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H) An unauthenticated network-based attacker able to send a maliciously crafted LLDP packet to one or more local segments, via LLDP proxy / tunneling agents or other LLDP through Layer 3 deployments, through one or more local segment broadcasts, may be able to cause multiple Junos devices to enter an improper boundary check condition allowing a memory corruption to occur, leading to multiple distributed Denials of Services. These Denials of Services attacks may have cascading Denials of Services to adjacent connected devices, impacts network devices, servers, workstations, etc. Further crafted packets may be able to sustain these Denials of Services conditions. Score 6.8 MEDIUM (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H) Further, if the attacker is authenticated on one or more target devices receiving and processing these malicious LLDP packets, while receiving the crafted packets, the attacker may be able to perform command or arbitrary code injection over multiple target devices thereby elevating their permissions and privileges, and taking control multiple devices. Score: 7.8 HIGH (CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H) Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D71; 12.3 versions prior to 12.3R12-S7; 12.3X48 versions prior to 12.3X48-D55; 14.1 versions prior to 14.1R8-S5, 14.1R9; 14.1X53 versions prior to 14.1X53-D46, 14.1X53-D50, 14.1X53-D107; 14.2 versions prior to 14.2R7-S9, 14.2R8; 15.1 versions prior to 15.1F2-S17, 15.1F5-S8, 15.1F6-S8, 15.1R5-S7, 15.1R7; 15.1X49 versions prior to 15.1X49-D90; 15.1X53 versions prior to 15.1X53-D65; 16.1 versions prior to 16.1R4-S6, 16.1R5; 16.1X65 versions prior to 16.1X65-D45; 16.2 versions prior to 16.2R2; 17.1 versions prior to 17.1R2. No other Juniper Networks products or platforms are affected by this issue.
CVE-2017-9946 A vulnerability has been identified in Siemens APOGEE PXC and TALON TC BACnet Automation Controllers in all versions <V3.5. An attacker with network access to the integrated web server (80/tcp and 443/tcp) could bypass the authentication and download sensitive information from the device.
CVE-2017-9863 ** DISPUTED ** An issue was discovered in SMA Solar Technology products. If a user simultaneously has Sunny Explorer running and visits a malicious host, cross-site request forgery can be used to change settings in the inverters (for example, issuing a POST request to change the user password). All Sunny Explorer settings available to the authenticated user are also available to the attacker. (In some cases, this also includes changing settings that the user has no access to.) This may result in complete compromise of the device. NOTE: the vendor reports that exploitation is unlikely because Sunny Explorer is used only rarely. Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected.
CVE-2017-9861 ** DISPUTED ** An issue was discovered in SMA Solar Technology products. The SIP implementation does not properly use authentication with encryption: it is vulnerable to replay attacks, packet injection attacks, and man in the middle attacks. An attacker is able to successfully use SIP to communicate with the device from anywhere within the LAN. An attacker may use this to crash the device, stop it from communicating with the SMA servers, exploit known SIP vulnerabilities, or find sensitive information from the SIP communications. Furthermore, because the SIP communication channel is unencrypted, an attacker capable of understanding the protocol can eavesdrop on communications. For example, passwords can be extracted. NOTE: the vendor's position is that authentication with encryption is not required on an isolated subnetwork. Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected.
CVE-2017-9860 ** DISPUTED ** An issue was discovered in SMA Solar Technology products. An attacker can use Sunny Explorer or the SMAdata2+ network protocol to update the device firmware without ever having to authenticate. If an attacker is able to create a custom firmware version that is accepted by the inverter, the inverter is compromised completely. This allows the attacker to do nearly anything: for example, giving access to the local OS, creating a botnet, using the inverters as a stepping stone into companies, etc. NOTE: the vendor reports that this attack has always been blocked by "a final integrity and compatibility check." Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected.
CVE-2017-9856 ** DISPUTED ** An issue was discovered in SMA Solar Technology products. Sniffed passwords from SMAdata2+ communication can be decrypted very easily. The passwords are "encrypted" using a very simple encryption algorithm. This enables an attacker to find the plaintext passwords and authenticate to the device. NOTE: the vendor reports that only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected.
CVE-2017-9542 D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device.
CVE-2017-9390 An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a shell script called connect.sh which is supposed to return a specific cookie for the user when the user is authenticated to https://home.getvera.com. One of the parameters retrieved by this script is "RedirectURL". However, the application lacks strict input validation of this parameter and this allows an attacker to execute the client-side code on this application.
CVE-2017-9389 An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a web user interface that allows a user to manage the device. As a part of the functionality the device allows a user to install applications written in the Lua programming language. Also the interface allows any user to write his/her application in the Lua language. However, this functionality is not protected by authentication and this allows an attacker to run arbitrary Lua code on the device. The POST request is forwarded to LuaUPNP daemon on the device. This binary handles the received Lua code in the function "LU::JobHandler_LuaUPnP::RunLua(LU::JobHandler_LuaUPnP *__hidden this, LU::UPnPActionWrapper *)". The value in the "code" parameter is then passed to the function "LU::LuaInterface::RunCode(char const*)" which actually loads the Lua engine and runs the code.
CVE-2017-9316 Firmware upgrade authentication bypass vulnerability was found in Dahua IPC-HDW4300S and some IP products. The vulnerability was caused by internal Debug function. This particular function was used for problem analysis and performance tuning during product development phase. It allowed the device to receive only specific data (one direction, no transmit) and therefore it was not involved in any instance of collecting user privacy data or allowing remote code execution.
CVE-2017-9298 Cross-site scripting vulnerability in Hitachi Device Manager before 8.5.2-01 and Hitachi Replication Manager before 8.5.2-00 allows authenticated remote users to execute arbitrary JavaScript code.
CVE-2017-9296 Open Redirect vulnerability in Hitachi Device Manager before 8.5.2-01 and Hitachi Tuning Manager before 8.5.2-00 allows remote attackers to redirect authenticated users to arbitrary web sites.
CVE-2017-9295 XXE vulnerability in Hitachi Device Manager before 8.5.2-01 and Hitachi Replication Manager before 8.5.2-00 allows authenticated remote users to read arbitrary files.
CVE-2017-9294 RMI vulnerability in Hitachi Device Manager before 8.5.2-01 allows remote attackers to execute internal commands without authentication via RMI ports.
CVE-2017-9134 An information-leakage issue was discovered on Mimosa Client Radios before 2.2.3 and Mimosa Backhaul Radios before 2.2.3. There is a page in the web interface that will show you the device's serial number, regardless of whether or not you have logged in. This information-leakage issue is relevant because there is another page (accessible without any authentication) that allows you to remotely factory reset the device simply by entering the serial number.
CVE-2017-8676 The Windows Graphics Device Interface (GDI) in Microsoft Windows Server 2008 SP2 and R2 SP1; Windows 7 SP1; Windows 8.1; Windows Server 2012 Gold and R2; Windows RT 8.1; Windows 10 Gold, 1511, 1607, 1703, and Server 2016; Office 2007 SP3; Office 2010 SP2; Word Viewer; Office for Mac 2011 and 2016; Skype for Business 2016; Lync 2013 SP1; Lync 2010; Lync 2010 Attendee; and Live Meeting 2007 Add-in and Console allows an authenticated attacker to retrieve information from a targeted system via a specially crafted application, aka "Windows GDI+ Information Disclosure Vulnerability."
CVE-2017-8417 An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device requires that a user logging into the device provide a username and password. However, the device allows D-Link apps on the mobile devices and desktop to communicate with the device without any authentication. As a part of that communication, the device uses custom version of base64 encoding to pass data back and forth between the apps and the device. However, the same form of communication can be initiated by any process including an attacker process on the mobile phone or the desktop and this allows a third party to retrieve the device's password without any authentication by sending just 1 UDP packet with custom base64 encoding. The severity of this attack is enlarged by the fact that there more than 100,000 D-Link devices out there.
CVE-2017-8416 An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device runs a custom daemon on UDP port 5978 which is called "dldps2121" and listens for broadcast packets sent on 255.255.255.255. This daemon handles custom D-Link UDP based protocol that allows D-Link mobile applications and desktop applications to discover D-Link devices on the local network. The binary processes the received UDP packets sent from any device in "main" function. One path in the function traverses towards a block of code that processing of packets which does an unbounded copy operation which allows to overflow the buffer. The custom protocol created by Dlink follows the following pattern: Packetlen, Type of packet; M=MAC address of device or broadcast; D=Device Type;C=base64 encoded command string;test=1111 We can see at address function starting at address 0x0000DBF8 handles the entire UDP packet and performs an insecure copy using strcpy function at address 0x0000DC88. This results in overflowing the stack pointer after 1060 characters and thus allows to control the PC register and results in code execution. The same form of communication can be initiated by any process including an attacker process on the mobile phone or the desktop and this allows a third-party application on the device to execute commands on the device without any authentication by sending just 1 UDP packet with custom base64 encoding.
CVE-2017-8413 An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device runs a custom daemon on UDP port 5978 which is called "dldps2121" and listens for broadcast packets sent on 255.255.255.255. This daemon handles custom D-Link UDP based protocol that allows D-Link mobile applications and desktop applications to discover D-Link devices on the local network. The binary processes the received UDP packets sent from any device in "main" function. One path in the function traverses towards a block of code that handles commands to be executed on the device. The custom protocol created by D-Link follows the following pattern: Packetlen, Type of packet; M=MAC address of device or broadcast; D=Device Type;C=base64 encoded command string;test=1111. If a packet is received with the packet type being "S" or 0x53 then the string passed in the "C" parameter is base64 decoded and then executed by passing into a System API. We can see at address 0x00009B44 that the string received in packet type subtracts 0x31 or "1" from the packet type and is compared against 0x22 or "double quotes". If that is the case, then the packet is sent towards the block of code that executes a command. Then the value stored in "C" parameter is extracted at address 0x0000A1B0. Finally, the string received is base 64 decoded and passed on to the system API at address 0x0000A2A8 as shown below. The same form of communication can be initiated by any process including an attacker process on the mobile phone or the desktop and this allows a third-party application on the device to execute commands on the device without any authentication by sending just 1 UDP packet with custom base64 encoding.
CVE-2017-8405 An issue was discovered on D-Link DCS-1130 and DCS-1100 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary loads at address 0x00012CF4 a flag called "Authenticate" that indicates whether a user should be authenticated or not before allowing access to the video feed. By default, the value for this flag is zero and can be set/unset using the HTTP interface and network settings tab as shown below. The device requires that a user logging to the HTTP management interface of the device to provide a valid username and password. However, the device does not enforce the same restriction by default on RTSP URL due to the checkbox unchecked by default, thereby allowing any attacker in possession of external IP address of the camera to view the live video feed. The severity of this attack is enlarged by the fact that there more than 100,000 D-Link devices out there.
CVE-2017-8229 Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices allow an unauthenticated attacker to download the administrative credentials. If the firmware version V2.420.AC00.16.R 9/9/2016 is dissected using binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that many of the binaries in the /usr folder. The binary "sonia" is the one that has the vulnerable function that sets up the default credentials on the device. If one opens this binary in IDA-pro one will notice that this follows a ARM little endian format. The function sub_436D6 in IDA pro is identified to be setting up the configuration for the device. If one scrolls to the address 0x000437C2 then one can see that /current_config is being set as an ALIAS for /mnt/mtd/Config folder on the device. If one TELNETs into the device and navigates to /mnt/mtd/Config folder, one can observe that it contains various files such as Account1, Account2, SHAACcount1, etc. This means that if one navigates to http://[IPofcamera]/current_config/Sha1Account1 then one should be able to view the content of the files. The security researchers assumed that this was only possible only after authentication to the device. However, when unauthenticated access tests were performed for the same URL as provided above, it was observed that the device file could be downloaded without any authentication.
CVE-2017-8227 Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices have a timeout policy to wait for 5 minutes in case 30 incorrect password attempts are detected using the Web and HTTP API interface provided by the device. However, if the same brute force attempt is performed using the ONVIF specification (which is supported by the same binary) then there is no account lockout or timeout executed. This can allow an attacker to circumvent the account protection mechanism and brute force the credentials. If the firmware version V2.420.AC00.16.R 9/9/2016 is dissected using binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that many of the binaries in the /usr folder. The binary "sonia" is the one that has the vulnerable function that performs the credential check in the binary for the ONVIF specification. If one opens this binary in IDA-pro one will notice that this follows a ARM little endian format. The function at address 00671618 in IDA pro is parses the WSSE security token header. The sub_ 603D8 then performs the authentication check and if it is incorrect passes to the function sub_59F4C which prints the value "Sender not authorized."
CVE-2017-8198 FusionSphere V100R006C00SPC102(NFV) has an SQL injection vulnerability. An authenticated, remote attacker could craft interface messages carrying malicious SQL statements and send them to a target device. Successful exploit could allow the attacker to launch an SQL injection attack and execute SQL commands.
CVE-2017-8197 FusionSphere V100R006C00SPC102(NFV) has a command injection vulnerability. An authenticated, remote attacker could craft packets with malicious strings and send them to a target device. Successful exploit could allow the attacker to launch a command injection attack and execute system commands.
CVE-2017-8133 Huawei iManager NetEco with software V600R008C00 and V600R008C10 has a command injection vulnerability. An authenticated, remote attacker could exploit this vulnerability to send malicious packets to a target device. Successful exploit could enable a low privileged user to execute commands that a high privileged user could execute, causing the files to be tampered with or deleted.
CVE-2017-7912 Hanwha Techwin SRN-4000, SRN-4000 firmware versions prior to SRN4000_v2.16_170401, A specially crafted http request and response could allow an attacker to gain access to the device management page with admin privileges without proper authentication.
CVE-2017-7406 The D-Link DIR-615 device before v20.12PTb04 doesn't use SSL for any of the authenticated pages. Also, it doesn't allow the user to generate his own SSL Certificate. An attacker can simply monitor network traffic to steal a user's credentials and/or credentials of users being added while sniffing the traffic.
CVE-2017-7405 On the D-Link DIR-615 before v20.12PTb04, once authenticated, this device identifies the user based on the IP address of his machine. By spoofing the IP address belonging to the victim's host, an attacker might be able to take over the administrative session without being prompted for authentication credentials. An attacker can get the victim's and router's IP addresses by simply sniffing the network traffic. Moreover, if the victim has web access enabled on his router and is accessing the web interface from a different network that is behind the NAT/Proxy, an attacker can sniff the network traffic to know the public IP address of the victim's router and take over his session as he won't be prompted for credentials.
CVE-2017-7318 Siklu EtherHaul devices before 7.4.0 are vulnerable to a remote command execution (RCE) vulnerability. This vulnerability allows a remote attacker to execute commands and retrieve information such as usernames and plaintext passwords from the device with no authentication.
CVE-2017-6871 A vulnerability was discovered in Siemens SIMATIC WinCC Sm@rtClient for Android (All versions before V1.0.2.2) and SIMATIC WinCC Sm@rtClient for Android Lite (All versions before V1.0.2.2). An attacker with physical access to an unlocked mobile device, that has the affected app running, could bypass the app's authentication mechanism under certain conditions.
CVE-2017-6796 A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. Cisco Bug IDs: CSCve48949.
CVE-2017-6795 A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device. Cisco Bug IDs: CSCvf10783.
CVE-2017-6778 A vulnerability in the Elastic Services Controller (ESC) web interface of the Cisco Ultra Services Platform could allow an authenticated, remote attacker to acquire sensitive information. The vulnerability is due to the transmission of sensitive information as part of a GET request. An attacker could exploit this vulnerability by sending a GET request to a vulnerable device. An exploit could allow the attacker to view information regarding the Ultra Services Platform deployment. Cisco Bug IDs: CSCvd76406. Known Affected Releases: 21.0.v0.65839.
CVE-2017-6775 A vulnerability in the CLI of Cisco ASR 5000 Series Aggregated Services Routers running the Cisco StarOS operating system could allow an authenticated, local attacker to elevate their privileges to admin-level privileges. The vulnerability is due to incorrect permissions that are given to a set of users. An attacker could exploit this vulnerability by logging in to the shell of an affected device and elevating their privileges by modifying environment variables. An exploit could allow the attacker to gain admin-level privileges and take control of the affected device. Cisco Bug IDs: CSCvd47741. Known Affected Releases: 21.0.v0.65839.
CVE-2017-6773 A vulnerability in the CLI of Cisco ASR 5000 Series Aggregated Services Routers running the Cisco StarOS operating system could allow an authenticated, local attacker to bypass the CLI restrictions and execute commands on the underlying operating system. The vulnerability is due to insufficient input sanitization of user-supplied input at the CLI. An attacker could exploit this vulnerability by crafting a script on the device that will allow them to bypass built-in restrictions. An exploit could allow the unauthorized user to launch the CLI directly from a command shell. Cisco Bug IDs: CSCvd47722. Known Affected Releases: 21.0.v0.65839.
CVE-2017-6768 A vulnerability in the build procedure for certain executable system files installed at boot time on Cisco Application Policy Infrastructure Controller (APIC) devices could allow an authenticated, local attacker to gain root-level privileges. The vulnerability is due to a custom executable system file that was built to use relative search paths for libraries without properly validating the library to be loaded. An attacker could exploit this vulnerability by authenticating to the device and loading a malicious library that can escalate the privilege level. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device. The attacker must have valid user credentials to log in to the device. Cisco Bug IDs: CSCvc96087. Known Affected Releases: 1.1(0.920a), 1.1(1j), 1.1(3f); 1.2 Base, 1.2(2), 1.2(3), 1.2.2; 1.3(1), 1.3(2), 1.3(2f); 2.0 Base, 2.0(1).
CVE-2017-6767 A vulnerability in Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, remote attacker to gain higher privileges than the account is assigned. The attacker will be granted the privileges of the last user to log in, regardless of whether those privileges are higher or lower than what should have been granted. The attacker cannot gain root-level privileges. The vulnerability is due to a limitation with how Role-Based Access Control (RBAC) grants privileges to remotely authenticated users when login occurs via SSH directly to the local management interface of the APIC. An attacker could exploit this vulnerability by authenticating to the targeted device. The attacker's privilege level will be modified to match that of the last user to log in via SSH. An exploit could allow the attacker to gain elevated privileges and perform CLI commands that should be restricted by the attacker's configured role. Cisco Bug IDs: CSCvc34335. Known Affected Releases: 1.0(1e), 1.0(1h), 1.0(1k), 1.0(1n), 1.0(2j), 1.0(2m), 1.0(3f), 1.0(3i), 1.0(3k), 1.0(3n), 1.0(4h), 1.0(4o); 1.1(0.920a), 1.1(1j), 1.1(3f); 1.2 Base, 1.2(2), 1.2(3), 1.2.2; 1.3(1), 1.3(2), 1.3(2f); 2.0 Base, 2.0(1).
CVE-2017-6764 A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) 9.5(1) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvd82064.
CVE-2017-6758 A vulnerability in the web framework of Cisco Unified Communications Manager 11.5(1.10000.6) could allow an authenticated, remote attacker to access arbitrary files in the context of the web root directory structure on an affected device. The vulnerability is due to insufficient input validation by the affected software. An attacker could exploit this vulnerability by using directory traversal techniques to read files in the web root directory structure on the Cisco Unified Communications Manager filesystem. Cisco Bug IDs: CSCve13796.
CVE-2017-6750 A vulnerability in AsyncOS for the Cisco Web Security Appliance (WSA) could allow an unauthenticated, local attacker to log in to the device with the privileges of a limited user or an unauthenticated, remote attacker to authenticate to certain areas of the web GUI, aka a Static Credentials Vulnerability. Affected Products: virtual and hardware versions of Cisco Web Security Appliance (WSA). More Information: CSCve06124. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270.
CVE-2017-6749 A vulnerability in the web-based management interface of Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. Affected Products: virtual and hardware versions of Cisco Web Security Appliance (WSA). More Information: CSCvd88865. Known Affected Releases: 10.1.0-204.
CVE-2017-6734 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface of an affected device, related to the Guest Portal. More Information: CSCvd74794. Known Affected Releases: 1.3(0.909) 2.1(0.800).
CVE-2017-6692 A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker to log in to the device with the privileges of the root user, aka an Insecure Default Account Information Vulnerability. More Information: CSCvd85710. Known Affected Releases: 21.0.v0.65839.
CVE-2017-6687 A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker with access to the management network to log in to the affected device using default credentials present on the system, aka an Insecure Default Password Vulnerability. More Information: CSCvc76695. Known Affected Releases: 21.0.0.
CVE-2017-6686 A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker with access to the management network to log in as an admin or oper user of the affected device, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76699. Known Affected Releases: 21.0.0.
CVE-2017-6685 A vulnerability in Cisco Ultra Services Framework Staging Server could allow an authenticated, remote attacker with access to the management network to log in as an admin user of the affected device, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76681. Known Affected Releases: 21.0.0.
CVE-2017-6623 A vulnerability in a script file that is installed as part of the Cisco Policy Suite (CPS) Software distribution for the CPS appliance could allow an authenticated, local attacker to escalate their privilege level to root. The vulnerability is due to incorrect sudoers permissions on the script file. An attacker could exploit this vulnerability by authenticating to the device and providing crafted user input at the CLI, using this script file to escalate their privilege level and execute commands as root. A successful exploit could allow the attacker to acquire root-level privileges and take full control of the appliance. The user has to be logged-in to the device with valid credentials for a specific set of users. The Cisco Policy Suite application is vulnerable when running software versions 10.0.0, 10.1.0, or 11.0.0. Cisco Bug IDs: CSCvc07366.
CVE-2017-6615 A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE 3.16 could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a race condition that could occur when the affected software processes an SNMP read request that contains certain criteria for a specific object ID (OID) and an active crypto session is disconnected on an affected device. An attacker who can authenticate to an affected device could trigger this vulnerability by issuing an SNMP request for a specific OID on the device. A successful exploit will cause the device to restart due to an attempt to access an invalid memory region. The attacker does not control how or when crypto sessions are disconnected on the device. Cisco Bug IDs: CSCvb94392.
CVE-2017-6605 A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to conduct a reflective cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. More Information: CSCvc85415. Known Affected Releases: 2.1(0.800).
CVE-2017-6044 An Improper Authorization issue was discovered in Sierra Wireless AirLink Raven XE, all versions prior to 4.0.14, and AirLink Raven XT, all versions prior to 4.0.11. Several files and directories can be accessed without authentication, which may allow a remote attacker to perform sensitive functions including arbitrary file upload, file download, and device reboot.
CVE-2017-5554 An issue was discovered in ABOOT in OnePlus 3 and 3T OxygenOS before 4.0.2. The attacker can reboot the device into the fastboot mode, which could be done without any authentication. A physical attacker can press the "Volume Up" button during device boot, where an attacker with ADB access can issue the adb reboot bootloader command. Then, the attacker can put the platform's SELinux in permissive mode, which severely weakens it, by issuing: fastboot oem selinux permissive.
CVE-2017-5256 In version 3.5 and prior of Cambium Networks ePMP firmware, all authenticated users have the ability to update the Device Name and System Description fields in the web administration console, and those fields are vulnerable to persistent cross-site scripting (XSS) injection.
CVE-2017-5237 Due to a lack of authentication, an unauthenticated user who knows the Eview EV-07S GPS Tracker's phone number can revert the device to a factory default configuration with an SMS command, "RESET!"
CVE-2017-4931 VMware AirWatch Console 9.x prior to 9.2.0 contains a vulnerability that could allow an authenticated AWC user to add malicious data to an enrolled device's log files. Successful exploitation of this issue could result in an unsuspecting AWC user opening a CSV file which contains malicious content.
CVE-2017-4930 VMware AirWatch Console 9.x prior to 9.2.0 contains a vulnerability that could allow an authenticated AWC user to add a malicious URL to an enrolled device's 'Links' page. Successful exploitation of this issue could result in an unsuspecting AWC user being redirected to a malicious URL.
CVE-2017-3888 A vulnerability in the web-based management interface of Cisco Unified Communications Manager could allow an authenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. This vulnerability affects Cisco Unified Communications Manager with a default configuration running an affected software release with the attacker authenticated as the administrative user. More Information: CSCvc83712. Known Affected Releases: 12.0(0.98000.452). Known Fixed Releases: 12.0(0.98000.750) 12.0(0.98000.708) 12.0(0.98000.707) 12.0(0.98000.704) 12.0(0.98000.554) 12.0(0.98000.546) 12.0(0.98000.543) 12.0(0.98000.248) 12.0(0.98000.244) 12.0(0.98000.242).
CVE-2017-3883 A vulnerability in the authentication, authorization, and accounting (AAA) implementation of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability occurs because AAA processes prevent the NX-OS System Manager from receiving keepalive messages when an affected device receives a high rate of login attempts, such as in a brute-force login attack. System memory can run low on the FXOS devices under the same conditions, which could cause the AAA process to unexpectedly restart or cause the device to reload. An attacker could exploit this vulnerability by performing a brute-force login attack against a device that is configured with AAA security services. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects the following Cisco products if they are running Cisco FXOS or NX-OS System Software that is configured for AAA services: Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System (UCS) 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuq58760, CSCuq71257, CSCur97432, CSCus05214, CSCux54898, CSCvc33141, CSCvd36971, CSCve03660.
CVE-2017-3871 A RADIUS Secret Disclosure vulnerability in the web network management interface of Cisco Prime Optical for Service Providers could allow an authenticated, remote attacker to disclose sensitive information in the configuration generated for a device. The attacker must have valid credentials for the device. More Information: CSCvc65257. Known Affected Releases: 10.6(0.1).
CVE-2017-3858 A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069.
CVE-2017-3852 A vulnerability in the Cisco application-hosting framework (CAF) component of the Cisco IOx application environment could allow an authenticated, remote attacker to write or modify arbitrary files in the virtual instance running on the affected device. The vulnerability is due to insufficient input validation of user-supplied application packages. An attacker who can upload a malicious package within Cisco IOx could exploit the vulnerability to modify arbitrary files. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52317.
CVE-2017-3831 A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.
CVE-2017-3820 A vulnerability in Simple Network Management Protocol (SNMP) functions of Cisco ASR 1000 Series Aggregation Services Routers running Cisco IOS XE Software Release 3.13.6S, 3.16.2S, or 3.17.1S could allow an authenticated, remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. More Information: CSCux68796. Known Affected Releases: 15.5(3)S2.1 15.6(1)S1.1. Known Fixed Releases: 15.4(3)S6.1 15.4(3)S6.2 15.5(3)S2.2 15.5(3)S3 15.6(0.22)S0.23 15.6(1)S2 16.2(0.295) 16.3(0.94) 15.5.3S3.
CVE-2017-3806 A vulnerability in CLI command processing in the Cisco Firepower 4100 Series Next-Generation Firewall and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to inject arbitrary shell commands that are executed by the device. More Information: CSCvb61343. Known Affected Releases: 2.0(1.68). Known Fixed Releases: 2.0(1.118) 2.1(1.47) 92.1(1.1646) 92.1(1.1763) 92.2(1.101).
CVE-2017-3216 WiMAX routers based on the MediaTek SDK (libmtk) that use a custom httpd plugin are vulnerable to an authentication bypass allowing a remote, unauthenticated attacker to gain administrator access to the device by performing an administrator password change on the device via a crafted POST request.
CVE-2017-3192 D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 do not sufficiently protect administrator credentials. The tools_admin.asp page discloses the administrator password in base64 encoding in the returned web page. A remote attacker with access to this page (potentially through a authentication bypass such as CVE-2017-3191) may obtain administrator credentials for the device.
CVE-2017-2914 An exploitable authentication bypass vulnerability exists in the API daemon of Circle with Disney running firmware 2.0.1. A specially crafted token can bypass the authentication routine of the Apid binary, causing the device to grant unintended administrative access. An attacker needs network connectivity to the device to trigger this vulnerability.
CVE-2017-2343 The Integrated User Firewall (UserFW) feature was introduced in Junos OS version 12.1X47-D10 on the Juniper SRX Series devices to provide simple integration of user profiles on top of the existing firewall polices. As part of an internal security review of the UserFW services authentication API, hardcoded credentials were identified and removed which can impact both the SRX Series device, and potentially LDAP and Active Directory integrated points. An attacker may be able to completely compromise SRX Series devices, as well as Active Directory servers and services. When Active Directory is compromised, it may allow access to user credentials, workstations, servers performing other functions such as email, database, etc. Inter-Forest Active Directory deployments may also be at risk as the attacker may gain full administrative control over one or more Active Directories depending on the credentials supplied by the administrator of the AD domains and SRX devices performing integrated authentication of users, groups and devices. To identify if your device is potentially vulnerable to exploitation, check to see if the service is operating; from CLI review the following output: root@SRX-Firewall# run show services user-identification active-directory-access domain-controller status extensive A result of "Status: Connected" will indicate that the service is active on the device. To evaluate if user authentication is occurring through the device: root@SRX-Firewall# run show services user-identification active-directory-access active-directory-authentication-table all Next review the results to see if valid users and groups are returned. e.g. Domain: juniperlab.com Total entries: 3 Source IP Username groups state 172.16.26.1 administrator Valid 192.168.26.2 engg01 engineers Valid 192.168.26.3 guest01 guests Valid Domain: NULL Total entries: 8 Source IP Username groups state 192.168.26.4 Invalid 192.168.26.5 Invalid This will also indicate that Valid users and groups are authenticating through the device. Affected releases are Juniper Networks Junos OS 12.3X48 from 12.3X48-D30 and prior to 12.3X48-D35 on SRX series; 15.1X49 from 15.1X49-D40 and prior to 15.1X49-D50 on SRX series. Devices on any version of Junos OS 12.1X46, or 12.1X47 are unaffected by this issue.
CVE-2017-2308 An XML External Entity Injection vulnerability in Juniper Networks Junos Space versions prior to 16.1R1 may allow an authenticated user to read arbitrary files on the device.
CVE-2017-17757 TP-Link TL-WVR and TL-WAR devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the interface field of an admin/wportal command to cgi-bin/luci, related to the get_device_byif function in /usr/lib/lua/luci/controller/admin/wportal.lua in uhttpd.
CVE-2017-17746 Weak access control methods on the TP-Link TL-SG108E 1.0.0 allow any user on a NAT network with an authenticated administrator to access the device without entering user credentials. The authentication record is stored on the device; thus if an administrator authenticates from a NAT network, the authentication applies to the IP address of the NAT gateway, and any user behind that NAT gateway is also treated as authenticated.
CVE-2017-17560 An issue was discovered on Western Digital MyCloud PR4100 2.30.172 devices. The web administration component, /web/jquery/uploader/multi_uploadify.php, provides multipart upload functionality that is accessible without authentication and can be used to place a file anywhere on the device's file system. This allows an attacker the ability to upload a PHP shell onto the device and obtain arbitrary code execution as root.
CVE-2017-17429 In K7 Antivirus Premium before 15.1.0.53, user-controlled input to the K7Sentry device is not sufficiently authenticated: a local user with a LOW integrity process can access a raw hard disk by sending a specific IOCTL.
CVE-2017-17309 Huawei HG255s-10 V100R001C163B025SP02 has a path traversal vulnerability due to insufficient validation of the received HTTP requests, a remote attacker may access the local files on the device without authentication.
CVE-2017-17301 Huawei AR120-S V200R005C32, V200R006C10, V200R007C00, V200R008C20, AR1200 V200R005C20, V200R005C32, V200R006C10, V200R007C00, V200R007C01, V200R007C02, V200R008C20, AR1200-S V200R005C32, V200R006C10, V200R007C00, V200R008C20, AR150 V200R006C10, V200R007C00, V200R007C01, V200R007C02, V200R008C20, AR160 V200R005C32, V200R006C10, V200R007C00, V200R007C01, V200R007C02, V200R008C20, AR200 V200R005C32, V200R006C10, V200R007C00, V200R007C01, V200R008C20, AR200-S V200R005C32, V200R006C10, V200R007C00, V200R008C20, AR2200 V200R005C20, V200R005C32, V200R006C10, V200R007C00, V200R007C01, V200R007C02, V200R008C20, AR2200-S V200R005C32, V200R006C10, V200R007C00, V200R008C20, AR3200 V200R005C32, V200R006C10, V200R006C11, V200R007C00, V200R007C01, V200R007C02, V200R008C00, V200R008C10, V200R008C20, V200R008C30, AR3600 V200R006C10, V200R007C00, V200R007C01, V200R008C20, AR510 V200R005C32, V200R006C10, V200R007C00, V200R008C20, CloudEngine 12800 V100R003C00, V100R003C10, V100R005C00, V100R005C10, V100R006C00, V200R001C00, CloudEngine 5800 V100R003C00, V100R003C10, V100R005C00, V100R005C10, V100R006C00, V200R001C00, CloudEngine 6800 V100R003C00, V100R003C10, V100R005C00, V100R005C10, V100R006C00, V200R001C00, CloudEngine 7800 V100R003C00, V100R003C10, V100R005C00, V100R005C10, V100R006C00, V200R001C00, DP300 V500R002C00, SMC2.0 V100R003C10, V100R005C00, V500R002C00, SRG1300 V200R005C32, V200R006C10, V200R007C00, V200R007C02, V200R008C20, SRG2300 V200R005C32, V200R006C10, V200R007C00, V200R007C02, V200R008C20, SRG3300 V200R005C32, V200R006C10, V200R007C00, V200R008C20, TE30 V100R001C10, TE60 V100R003C00, V500R002C00, VP9660 V200R001C02, V200R001C30, V500R002C00, ViewPoint 8660 V100R008C02, V100R008C03, eSpace IAD V300R002C01, eSpace U1981 V200R003C20, V200R003C30, eSpace USM V100R001C01, V300R001C00 have a weak cryptography vulnerability. Due to not properly some values in the certificates, an unauthenticated remote attacker could forges a specific RSA certificate and exploits the vulnerability to pass identity authentication and logs into the target device to obtain permissions configured for the specific user name.
CVE-2017-17281 SFTP module in Huawei DP300 V500R002C00; RP200 V600R006C00; TE30 V100R001C10; V500R002C00; V600R006C00; TE40 V500R002C00; V600R006C00; TE50 V500R002C00; V600R006C00; TE60 V100R001C10; V500R002C00; V600R006C00 has an out-of-bounds read vulnerability. A remote, authenticated attacker could exploit this vulnerability by sending specially crafted messages to a target device. Successful exploit may cause some information leak.
CVE-2017-17187 Huawei DP300 V500R002C00, RP200 V500R002C00, V600R006C00, TE30 V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C10, V500R002C00, V600R006C00 have an integer overflow vulnerability. Due to insufficient input validation, an authenticated, remote attacker could send malformed SOAP packets to the target device. Successful exploit could cause an integer overflow and might reset a process.
CVE-2017-17186 Huawei DP300 V500R002C00, RP200 V500R002C00, V600R006C00, TE30 V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C10, V500R002C00, V600R006C00 have a DoS vulnerability. Due to insufficient input validation, an authenticated, remote attacker could send malformed SOAP packets to the target device. Successful exploit could make some data overwritten, leak device memory and potentially reset a process.
CVE-2017-17185 Huawei DP300 V500R002C00, RP200 V500R002C00, V600R006C00, TE30 V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C10, V500R002C00, V600R006C00 have a out-of-bounds read vulnerability. Due to insufficient input validation, an authenticated, remote attacker could send malformed SOAP packets to the target device. Successful exploit could make the device access invalid memory and might reset a process.
CVE-2017-17184 Huawei DP300 V500R002C00, RP200 V500R002C00, V600R006C00, TE30 V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C10, V500R002C00, V600R006C00 have an integer overflow vulnerability. Due to insufficient input validation, an authenticated, remote attacker could send malformed SOAP packets to the target device. Successful exploit could cause an integer overflow and might reset a process.
CVE-2017-17183 Huawei DP300 V500R002C00, RP200 V500R002C00, V600R006C00, TE30 V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C10, V500R002C00, V600R006C00 have an integer overflow vulnerability. Due to insufficient input validation, an authenticated, remote attacker could send malformed SOAP packets to the target device. Successful exploit could cause an integer overflow and might reset a process.
CVE-2017-17182 Huawei DP300 V500R002C00, RP200 V500R002C00, V600R006C00, TE30 V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C10, V500R002C00, V600R006C00 have a out-of-bounds read vulnerability. Due to insufficient input validation, an authenticated, remote attacker could send malformed SOAP packets to the target device. Successful exploit could make the device access invalid memory and might reset a process.
CVE-2017-17146 Huawei DP300 V500R002C00 have a buffer overflow vulnerability due to the lack of validation. An authenticated local attacker can craft specific XML files to the affected products and parse this file, which result in DoS attacks or remote code execution on the device.
CVE-2017-17065 An issue was discovered on D-Link DIR-605L Model B before FW2.11betaB06_hbrf devices, related to the code that handles the authentication values for HNAP. An attacker can cause a denial of service (device crash) or possibly have unspecified other impact by sending a sufficiently long string in the password field of the HTTP Basic Authentication section of the HTTP request.
CVE-2017-16960 TP-Link TL-WVR, TL-WAR, TL-ER, and TL-R devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the t_bindif field of an admin/interface command to cgi-bin/luci, related to the get_device_byif function in /usr/lib/lua/luci/controller/admin/interface.lua in uhttpd.
CVE-2017-16958 TP-Link TL-WVR, TL-WAR, TL-ER, and TL-R devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the t_bindif field of an admin/bridge command to cgi-bin/luci, related to the get_device_byif function in /usr/lib/lua/luci/controller/admin/bridge.lua in uhttpd.
CVE-2017-16743 An Improper Authorization issue was discovered in PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, and 48xxx Series products running firmware Version 1.0 to 1.32. A remote unauthenticated attacker may be able to craft special HTTP requests allowing an attacker to bypass web-service authentication allowing the attacker to obtain administrative privileges on the device.
CVE-2017-16673 Datto Backup Agent 1.0.6.0 and earlier does not authenticate incoming connections. This allows an attacker to impersonate a Datto Backup Appliance to "pair" with the agent and issue requests to this agent, if the attacker can reach the agent on TCP port 25566 or 25568, and send unspecified "specific information" by which the agent identifies a network device that is "appearing to be a valid Datto."
CVE-2017-16566 On Jooan IP Camera A5 2.3.36 devices, an insecure FTP server does not require authentication, which allows remote attackers to read or replace core system files including those used for authentication (such as passwd and shadow). This can be abused to take full root level control of the device.
CVE-2017-16348 An exploitable denial of service vulnerability exists in Insteon Hub running firmware version 1012. Leftover demo functionality allows for arbitrarily rebooting the device without authentication. An attacker can send a UDP packet to trigger this vulnerability.
CVE-2017-15933 SQL injection vulnerability vulnerability in the EyesOfNetwork web interface (aka eonweb) 5.1-0 allows remote authenticated administrators to execute arbitrary SQL commands via the host parameter to module/capacity_per_device/index.php.
CVE-2017-15534 The Norton App Lock prior to version 1.3.0.13 can be susceptible to an authentication bypass exploit. In this type of circumstance, the exploit can allow the user to kill the app to prevent it from locking the device, thereby allowing the individual to gain device access.
CVE-2017-15315 Patch module of Huawei NIP6300 V500R001C20SPC100, V500R001C20SPC200, NIP6600 V500R001C20SPC100, V500R001C20SPC200, Secospace USG6300 V500R001C20SPC100, V500R001C20SPC200, Secospace USG6500 V500R001C20SPC100, V500R001C20SPC200 has a memory leak vulnerability. An authenticated attacker could execute special commands many times, the memory leaking happened, which would cause the device to reset finally.
CVE-2017-15313 Huawei SmartCare V200R003C10 has a CSV injection vulnerability. An remote authenticated attacker could inject malicious CSV expression to the affected device.
CVE-2017-15312 Huawei SmartCare V200R003C10 has a stored XSS (cross-site scripting) vulnerability in the dashboard module. A remote authenticated attacker could exploit this vulnerability to inject malicious scripts in the affected device.
CVE-2017-15188 A persistent (stored) XSS vulnerability in the EyesOfNetwork web interface (aka eonweb) 5.1-0 allows remote authenticated administrators to inject arbitrary web script or HTML via the hosts array parameter to module/admin_device/index.php.
CVE-2017-15043 A vulnerability in Sierra Wireless AirLink GX400, GX440, ES440, and LS300 routers with firmware before 4.4.5 and GX450, ES450, RV50, RV50X, MP70, and MP70E routers with firmware before 4.9 could allow an authenticated remote attacker to execute arbitrary code and gain full control of an affected system, including issuing commands with root privileges. This vulnerability is due to insufficient input validation on user-controlled input in an HTTP request to the targeted device. An attacker in possession of router login credentials could exploit this vulnerability by sending a crafted HTTP request to an affected system.
CVE-2017-14911 In Android before 2018-01-05 on Qualcomm Snapdragon IoT, Snapdragon Mobile, Snapdragon Automobile APQ8096AU, MDM9206, MDM9650, MSM8996AU, SD 210/SD 212/SD 205, SD 425, SD 430, SD 625, SD 650/52, SD 820, SD 835, it is possible for the XBL loader to skip the authentication of device config.
CVE-2017-14443 An exploitable information leak vulnerability exists in Insteon Hub running firmware version 1012. The HTTP server implementation incorrectly checks the number of GET parameters supplied, leading to an arbitrarily controlled information leak on the whole device memory. An attacker can send an authenticated HTTP request to trigger this vulnerability.
CVE-2017-13719 The Amcrest IPM-721S Amcrest_IPC-AWXX_Eng_N_V2.420.AC00.17.R.20170322 allows HTTP requests that permit enabling various functionalities of the camera by using HTTP APIs, instead of the web management interface that is provided by the application. This HTTP API receives the credentials as base64 encoded in the Authorization HTTP header. However, a missing length check in the code allows an attacker to send a string of 1024 characters in the password field, and allows an attacker to exploit a memory corruption issue. This can allow an attacker to circumvent the account protection mechanism and brute force the credentials. If the firmware version Amcrest_IPC-AWXX_Eng_N_V2.420.AC00.17.R.20170322 is dissected using the binwalk tool, one obtains a _user-x.squashfs.img.extracted archive which contains the filesystem set up on the device that has many of the binaries in the /usr folder. The binary "sonia" is the one that has the vulnerable function that performs the credential check in the binary for the HTTP API specification. If we open this binary in IDA Pro we will notice that this follows an ARM little-endian format. The function at address 00415364 in IDA Pro starts the HTTP authentication process. This function calls another function at sub_ 0042CCA0 at address 0041549C. This function performs a strchr operation after base64 decoding the credentials, and stores the result on the stack, which results in a stack-based buffer overflow.
CVE-2017-12861 The Epson "EasyMP" software is designed to remotely stream a users computer to supporting projectors.These devices are authenticated using a unique 4-digit code, displayed on-screen - ensuring only those who can view it are streaming.All Epson projectors supporting the "EasyMP" software are vulnerable to a brute-force vulnerability, allowing any attacker on the network to remotely control and stream to the vulnerable device
CVE-2017-12576 An issue was discovered on the PLANEX CS-QR20 1.30. A hidden and undocumented management page allows an attacker to execute arbitrary code on the device when the user is authenticated. The management page was used for debugging purposes, once you login and access the page directly (/admin/system_command.asp), you can execute any command.
CVE-2017-12574 An issue was discovered on PLANEX CS-W50HD devices with firmware before 030720. A hardcoded credential "supervisor:dangerous" was injected into web authentication database "/.htpasswd" during booting process, which allows attackers to gain unauthorized access and control the device completely; the account can't be modified or deleted.
CVE-2017-12573 An issue was discovered on PLANEX CS-W50HD devices with firmware before 030720. The device has a command-injection vulnerability in the web management UI on NAS settings page "/cgi-bin/nasset.cgi". An attacker can send a crafted HTTP POST request to execute arbitrary code. Authentication is required before executing the attack.
CVE-2017-12358 A vulnerability in the web-based management interface of Cisco Jabber for Windows, Mac, Android, and iOS could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a malicious link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf79080, CSCvf79088.
CVE-2017-12357 A vulnerability in the web-based management interface of Cisco Unified Communications Manager could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf79346.
CVE-2017-12351 A vulnerability in the guest shell feature of Cisco NX-OS System Software could allow an authenticated, local attacker to read and send packets outside the scope of the guest shell container. An attacker would need valid administrator credentials to perform this attack. The vulnerability is due to insufficient internal security measures in the guest shell feature. An attacker could exploit this vulnerability by sending or receiving packets on the device-internal network outside of the guest shell container, aka "Unauthorized Internal Interface Access." This vulnerability affects the following products running Cisco NX-OS System Software: Nexus 3000 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvf33038.
CVE-2017-12340 A vulnerability in Cisco NX-OS System Software running on Cisco MDS Multilayer Director Switches, Cisco Nexus 7000 Series Switches, and Cisco Nexus 7700 Series Switches could allow an authenticated, local attacker to access the Bash shell of an affected device's operating system, even if the Bash shell is disabled on the system. The vulnerability is due to insufficient sanitization of user-supplied parameters that are passed to certain functions of the Python scripting sandbox of the affected system. An attacker could exploit this vulnerability to escape the scripting sandbox and enter the Bash shell of the operating system with the privileges of the authenticated user for the affected system. To exploit this vulnerability, the attacker must have local access to the affected system and be authenticated to the affected system with administrative or Python execution privileges. Cisco Bug IDs: CSCvd86513.
CVE-2017-12339 A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow the attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, and Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve99925, CSCvf15164, CSCvf15167, CSCvf15170, CSCvf15173.
CVE-2017-12338 A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to read the contents of arbitrary files. The vulnerability is due to insufficient input validation for a specific CLI command. An attacker could exploit this vulnerability by issuing a crafted command on the CLI. An exploit could allow the attacker unauthorized access to read arbitrary files on the underlying local file system. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow an attacker to read files from any VDC. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve51707, CSCve93961, CSCve93964, CSCve93965, CSCve93968, CSCve93974, CSCve93976.
CVE-2017-12336 A vulnerability in the TCL scripting subsystem of Cisco NX-OS System Software could allow an authenticated, local attacker to escape the interactive TCL shell and gain unauthorized access to the underlying operating system of the device. The vulnerability exists due to insufficient input validation of user-supplied files passed to the interactive TCL shell of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. To exploit this vulnerability, an attacker must have local access and be authenticated to the targeted device with administrative or tclsh execution privileges. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve93750, CSCve93762, CSCve93763, CSCvg04127.
CVE-2017-12335 A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command and gain unauthorized access to the underlying operating system of the device. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow an attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCvf14923, CSCvf14926, CSCvg04095.
CVE-2017-12333 A vulnerability in Cisco NX-OS System Software could allow an authenticated, local attacker to bypass signature verification when loading a software image. The vulnerability is due to insufficient NX-OS signature verification for software images. An authenticated, local attacker could exploit this vulnerability to bypass signature verification and load a crafted, unsigned software image on a targeted device. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf25045, CSCvf31495.
CVE-2017-12332 A vulnerability in Cisco NX-OS System Software patch installation could allow an authenticated, local attacker to write a file to arbitrary locations. The vulnerability is due to insufficient restrictions in the patch installation process. An attacker could exploit this vulnerability by installing a crafted patch image on an affected device. The vulnerable operation occurs prior to patch activation. An exploit could allow the attacker to write arbitrary files on an affected system as root. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf16513, CSCvf23794, CSCvf23832.
CVE-2017-12331 A vulnerability in Cisco NX-OS System Software could allow an authenticated, local attacker to bypass signature verification when loading a software patch. The vulnerability is due to insufficient NX-OS signature verification for software patches. An authenticated, local attacker could exploit this vulnerability to bypass signature verification and load a crafted, unsigned software patch on a targeted device. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf16494, CSCvf23655.
CVE-2017-12330 A vulnerability in the CLI of Cisco NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command and gaining unauthorized access to the underlying operating system of the device. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow an attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve99902, CSCvf14879.
CVE-2017-12329 A vulnerability in the CLI of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow the attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco FXOS or NX-OS System Software: Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve51700, CSCve93833, CSCve93860, CSCve93863, CSCve93864, CSCve93880.
CVE-2017-12315 A vulnerability in system logging when replication is being configured with the Cisco HyperFlex System could allow an authenticated, local attacker to view sensitive information that should be restricted in the system log files. The attacker would have to be authenticated as an administrative user to conduct this attack. The vulnerability is due to lack of proper masking of sensitive information in system log files. An attacker could exploit this vulnerability by authenticating to the targeted device and viewing the system log file. An exploit could allow the attacker to view sensitive system information that should have been restricted. The attacker could use this information to conduct additional reconnaissance attacks. Cisco Bug IDs: CSCvg31472.
CVE-2017-12314 A vulnerability in the Cisco FindIT Network Discovery Utility could allow an authenticated, local attacker to perform a DLL preloading attack, potentially causing a partial impact to the device availability, confidentiality, and integrity, aka Insecure Library Loading. The vulnerability is due to the application loading a malicious copy of a specific, nondefined DLL file instead of the DLL file it was expecting. An attacker could exploit this vulnerability by placing an affected DLL within the search path of the host system. An exploit could allow the attacker to load a malicious DLL file into the system, thus partially compromising confidentiality, integrity, and availability on the device. Cisco Bug IDs: CSCvf37955.
CVE-2017-12305 A vulnerability in the debug interface of Cisco IP Phone 8800 series could allow an authenticated, local attacker to execute arbitrary commands, aka Debug Shell Command Injection. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting additional command input to the affected parameter in the debug shell. Cisco Bug IDs: CSCvf80034.
CVE-2017-12301 A vulnerability in the Python scripting subsystem of Cisco NX-OS Software could allow an authenticated, local attacker to escape the Python parser and gain unauthorized access to the underlying operating system of the device. The vulnerability exists due to insufficient sanitization of user-supplied parameters that are passed to certain Python functions within the scripting sandbox of the affected device. An attacker could exploit this vulnerability to escape the scripting sandbox and execute arbitrary commands on the underlying operating system with the privileges of the authenticated user. To exploit this vulnerability, an attacker must have local access and be authenticated to the targeted device with administrative or Python execution privileges. These requirements could limit the possibility of a successful exploit. This vulnerability affects the following Cisco products if they are running Cisco NX-OS Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches - Standalone, NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvb86832, CSCvd86474, CSCvd86479, CSCvd86484, CSCvd86490, CSCve97102, CSCvf12757, CSCvf12804, CSCvf12815, CSCvf15198.
CVE-2017-12289 A vulnerability in conditional, verbose debug logging for the IPsec feature of Cisco IOS XE Software could allow an authenticated, local attacker to display sensitive IPsec information in the system log file. The vulnerability is due to incorrect implementation of IPsec conditional, verbose debug logging that causes sensitive information to be written to the log file. This information should be restricted. An attacker who has valid administrative credentials could exploit this vulnerability by authenticating to the device and enabling conditional, verbose debug logging for IPsec and viewing the log file. An exploit could allow the attacker to access sensitive information related to the IPsec configuration. Cisco Bug IDs: CSCvf12081.
CVE-2017-12283 A vulnerability in the handling of 802.11w Protected Management Frames (PAF) by Cisco Aironet 3800 Series Access Points could allow an unauthenticated, adjacent attacker to terminate a valid user connection to an affected device, aka Denial of Service. The vulnerability exists because the affected device does not properly validate 802.11w PAF disassociation and deauthentication frames that it receives. An attacker could exploit this vulnerability by sending a spoofed 802.11w PAF frame from a valid, authenticated client on an adjacent network to an affected device. A successful exploit could allow the attacker to terminate a single valid user connection to the affected device. This vulnerability affects Access Points that are configured to run in FlexConnect mode. Cisco Bug IDs: CSCvc20627.
CVE-2017-12281 A vulnerability in the implementation of Protected Extensible Authentication Protocol (PEAP) functionality for standalone configurations of Cisco Aironet 1800, 2800, and 3800 Series Access Points could allow an unauthenticated, adjacent attacker to bypass authentication and connect to an affected device. The vulnerability exists because the affected device uses an incorrect default configuration setting of fail open when running in standalone mode. An attacker could exploit this vulnerability by attempting to connect to an affected device. A successful exploit could allow the attacker to bypass authentication and connect to the affected device. This vulnerability affects Cisco Aironet 1800, 2800, and 3800 Series Access Points that are running a vulnerable software release and use WLAN configuration settings that include FlexConnect local switching and central authentication with MAC filtering. Cisco Bug IDs: CSCvd46314.
CVE-2017-12278 A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco Wireless LAN Controllers could allow an authenticated, remote attacker to cause an affected device to restart, resulting in a denial of service (DoS) condition. The vulnerability is due to a memory leak that occurs on an affected device after the device fails to deallocate a buffer that is used when certain MIBs are polled. An attacker who knows the SNMP Version 2 SNMP Read string or has valid SNMP Version 3 credentials for an affected device could repeatedly poll the affected MIB object IDs (OIDs) and consume available memory on the device. When memory is sufficiently depleted on the device, the device will restart, resulting in a DoS condition. Cisco Bug IDs: CSCvc71674.
CVE-2017-12274 A vulnerability in Extensible Authentication Protocol (EAP) ingress frame processing for the Cisco Aironet 1560, 2800, and 3800 Series Access Points could allow an unauthenticated, Layer 2 radio frequency (RF) adjacent attacker to cause the Access Point (AP) to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of the EAP frame. An attacker could exploit this vulnerability by sending a malformed EAP frame to the targeted device. A successful exploit could allow the attacker to cause the AP to reload, resulting in a DoS condition while the AP is reloading. It may be necessary to manually power cycle the device in order for it to recover. This vulnerability affects the following Cisco products running either the Lightweight AP Software or Mobility Express image: Aironet 1560 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: The Cisco Aironet 1560 Series Access Point device is supported as of release 8.3.112.0. Cisco Bug IDs: CSCve18935.
CVE-2017-12268 A vulnerability in the Network Access Manager (NAM) of Cisco AnyConnect Secure Mobility Client could allow an authenticated, local attacker to enable multiple network adapters, aka a Dual-Homed Interface vulnerability. The vulnerability is due to insufficient NAM policy enforcement. An attacker could exploit this vulnerability by manipulating network interfaces of the device to allow multiple active network interfaces. A successful exploit could allow the attacker to send traffic over a non-authorized network interface. Cisco Bug IDs: CSCvf66539.
CVE-2017-12261 A vulnerability in the restricted shell of the Cisco Identity Services Engine (ISE) that is accessible via SSH could allow an authenticated, local attacker to run arbitrary CLI commands with elevated privileges. The vulnerability is due to incomplete input validation of the user input for CLI commands issued at the restricted shell. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. An attacker would need valid user credentials to the device to exploit this vulnerability. The vulnerability affects the following Cisco Identity Services Engine (ISE) products running Release 1.4, 2.0, 2.0.1, 2.1.0: ISE, ISE Express, ISE Virtual Appliance. Cisco Bug IDs: CSCve74916.
CVE-2017-12252 A vulnerability in the Cisco FindIT Network Discovery Utility could allow an authenticated, local attacker to perform a DLL preloading attack, potentially causing a partial impact to device availability, confidentiality, and integrity. The vulnerability is due to the application loading a malicious copy of a specific, nondefined DLL file instead of the DLL file it was expecting. An attacker could exploit this vulnerability by placing an affected DLL within the search path of the host system. An exploit could allow the attacker to load a malicious DLL file into the system, thus partially compromising confidentiality, integrity, and availability on the device. Cisco Bug IDs: CSCve89785.
CVE-2017-12251 A vulnerability in the web console of the Cisco Cloud Services Platform (CSP) 2100 could allow an authenticated, remote attacker to interact maliciously with the services or virtual machines (VMs) operating remotely on an affected CSP device. The vulnerability is due to weaknesses in the generation of certain authentication mechanisms in the URL of the web console. An attacker could exploit this vulnerability by browsing to one of the hosted VMs' URLs in Cisco CSP and viewing specific patterns that control the web application's mechanisms for authentication control. An exploit could allow the attacker to access a specific VM on the CSP, which causes a complete loss of the system's confidentiality, integrity, and availability. This vulnerability affects Cisco Cloud Services Platform (CSP) 2100 running software release 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, or 2.2.2. Cisco Bug IDs: CSCve64690.
CVE-2017-12246 A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063.
CVE-2017-12243 A vulnerability in the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to obtain root shell privileges on the device, aka Command Injection. The vulnerability is due to improper validation of string input in the shell application. An attacker could exploit this vulnerability through the use of malicious commands. A successful exploit could allow the attacker to obtain root shell privileges on the device. Cisco Bug IDs: CSCvf20741, CSCvf60078.
CVE-2017-12230 A vulnerability in the web-based user interface (web UI) of Cisco IOS XE 16.2 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incorrect default permission settings for new users who are created by using the web UI of the affected software. An attacker could exploit this vulnerability by using the web UI of the affected software to create a new user and then logging into the web UI as the newly created user. A successful exploit could allow the attacker to elevate their privileges on the affected device. This vulnerability affects Cisco devices that are running a vulnerable release Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuy83062.
CVE-2017-12229 A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036.
CVE-2017-12226 A vulnerability in the web-based Wireless Controller GUI of Cisco IOS XE Software for Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, and Cisco New Generation Wireless Controllers (NGWC) 3850 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incomplete input validation of HTTP requests by the affected GUI, if the GUI connection state or protocol changes. An attacker could exploit this vulnerability by authenticating to the Wireless Controller GUI as a Lobby Administrator user of an affected device and subsequently changing the state or protocol for their connection to the GUI. A successful exploit could allow the attacker to elevate their privilege level to administrator and gain full control of the affected device. This vulnerability affects the following Cisco products if they are running Cisco IOS XE Software Release 3.7.0E, 3.7.1E, 3.7.2E, 3.7.3E, 3.7.4E, or 3.7.5E: Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, Cisco New Generation Wireless Controllers (NGWC) 3850. Cisco Bug IDs: CSCvd73746.
CVE-2017-12211 A vulnerability in the IPv6 Simple Network Management Protocol (SNMP) code of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause high CPU usage or a reload of the device. The vulnerability is due to IPv6 sub block corruption. An attacker could exploit this vulnerability by polling the affected device IPv6 information. An exploit could allow the attacker to trigger high CPU usage or a reload of the device. Known Affected Releases: Denali-16.3.1. Cisco Bug IDs: CSCvb14640.
CVE-2017-11649 Cross-site request forgery (CSRF) vulnerability in DrayTek Vigor AP910C devices with firmware 1.2.0_RC3 build r6594 allows remote attackers to hijack the authentication of unspecified users for requests that enable SNMP on the remote device via vectors involving goform/setSnmp.
CVE-2017-10903 Improper authentication issue in PTW-WMS1 firmware version 2.000.012 allows remote attackers to log in to the device with root privileges and conduct arbitrary operations via unspecified vectors.
CVE-2017-1000020 SYN Flood or FIN Flood attack in ECos 1 and other versions embedded devices results in web Authentication Bypass. "eCos Embedded Web Servers used by Multiple Routers and Home devices, while sending SYN Flood or FIN Flood packets fails to validate and handle the packets and does not ask for any sign of authentication resulting in Authentication Bypass. An attacker can take complete advantage of this bug and take over the device remotely or locally. The bug has been successfully tested and reproduced in some versions of SOHO Routers manufactured by TOTOLINK, GREATEK and others."
CVE-2016-9355 An issue was discovered in Becton, Dickinson and Company (BD) Alaris 8015 Point of Care (PC) unit, Version 9.5 and prior versions, and Version 9.7. An unauthorized user with physical access to an Alaris 8015 PC unit may be able to obtain unencrypted wireless network authentication credentials and other sensitive technical data by disassembling an Alaris 8015 PC unit and accessing the device's flash memory. Older software versions of the Alaris 8015 PC unit, Version 9.5 and prior versions, store wireless network authentication credentials and other sensitive technical data on the affected device's removable flash memory. Being able to remove the flash memory from the affected device reduces the risk of detection, allowing an attacker to extract stored data at the attacker's convenience.
CVE-2016-9215 A vulnerability in Cisco IOS XR Software could allow an authenticated, local attacker to log in to the device with the privileges of the root user. More Information: CSCva38434. Known Affected Releases: 6.1.1.BASE.
CVE-2016-9208 A vulnerability in the File Management Utility, the Download File form, and the Serviceability application of Cisco Emergency Responder could allow an authenticated, remote attacker to access files in arbitrary locations on the file system of an affected device. More Information: CSCva98951 CSCva98954 CSCvb57494. Known Affected Releases: 11.5(2.10000.5). Known Fixed Releases: 12.0(0.98000.14) 12.0(0.98000.16).
CVE-2016-8754 Huawei OceanStor 5600 V3 V300R003C00 has a hardcoded SSH key vulnerability; the hardcoded keys are used to encrypt communication data and authenticate different nodes of the devices. An attacker may obtain the hardcoded keys and log in to such a device through SSH.
CVE-2016-8712 An exploitable nonce reuse vulnerability exists in the Web Application functionality of Moxa AWK-3131A Wireless AP running firmware 1.1. The device uses one nonce for all session authentication requests and only changes the nonce if the web application has been idle for 300 seconds.
CVE-2016-8375 An issue was discovered in Becton, Dickinson and Company (BD) Alaris 8015 Point of Care (PC) unit, Version 9.5 and prior versions, and Version 9.7, and 8000 PC unit. An unauthorized user with physical access to an affected Alaris PC unit may be able to obtain unencrypted wireless network authentication credentials and other sensitive technical data by disassembling the PC unit and accessing the device's flash memory. The Alaris 8015 PC unit, Version 9.7, and the 8000 PC unit store wireless network authentication credentials and other sensitive technical data on internal flash memory. Accessing the internal flash memory of the affected device would require special tools to extract data and carrying out this attack at a healthcare facility would increase the likelihood of detection.
CVE-2016-8277 Huawei USG9520, USG9560, and USG9580 unified security gateways with software before V300R001C01SPCa00 allow remote authenticated users to cause a denial of service (device restart) via an unspecified command parameter.
CVE-2016-7814 I-O DATA DEVICE TS-WRLP firmware version 1.00.01 and earlier and TS-WRLA firmware version 1.00.01 and earlier allow remote attackers to obtain authentication credentials via unspecified vectors.
CVE-2016-7469 A stored cross-site scripting (XSS) vulnerability in the Configuration utility device name change page in BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, PSM, WebAccelerator, WOM and WebSafe version 12.0.0 - 12.1.2, 11.4.0 - 11.6.1, and 11.2.1 allows an authenticated user to inject arbitrary web script or HTML. Exploitation requires Resource Administrator or Administrator privileges, and it could cause the Configuration utility client to become unstable.
CVE-2016-7114 A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merging Unit 6MU80 : All versions < 1.02.02; SIPROTEC 7SJ686 : All versions < V 4.87; SIPROTEC 7UT686 : All versions < V 4.02; SIPROTEC 7SD686 : All versions < V 4.05; SIPROTEC 7SJ66 : All versions < V 4.30. Attackers with network access to the device's web interface (port 80/tcp) could possibly circumvent authentication and perform certain administrative operations. A legitimate user must be logged into the web interface for the attack to be successful.
CVE-2016-7112 A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merging Unit 6MU80 : All versions < 1.02.02. Attackers with network access to the device's web interface (port 80/tcp) could possibly circumvent authentication and perform certain administrative operations.
CVE-2016-6824 Huawei AC6003, AC6005, AC6605, and ACU2 access controllers with software before V200R006C10SPC200 allows remote authenticated users to cause a denial of service (device restart) via crafted CAPWAP packets.
CVE-2016-6544 getgps data in iTrack Easy can be modified without authentication by setting the data using the parametercmd:setothergps. This vulnerability can be exploited to alter the GPS data of a lost device.
CVE-2016-6320 Cross-site scripting (XSS) vulnerability in app/assets/javascripts/host_edit_interfaces.js in Foreman before 1.12.2 allows remote authenticated users to inject arbitrary web script or HTML via the network interface device identifier in the host interface form.
CVE-2016-6158 Multiple cross-site request forgery (CSRF) vulnerabilities in Huawei WS331a routers with software before WS331a-10 V100R001C01B112 allow remote attackers to hijack the authentication of administrators for requests that (1) restore factory settings or (2) reboot the device via unspecified vectors.
CVE-2016-5815 An issue was discovered on Schneider Electric IONXXXX series power meters ION73XX series, ION75XX series, ION76XX series, ION8650 series, ION8800 series, and PM5XXX series. No authentication is configured by default. An unauthorized user can access the device management portal and make configuration changes.
CVE-2016-5021 The iControl REST service in F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, Link Controller, and PEM 11.5.x before 11.5.4, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF3; BIG-IP DNS 12.x before 12.0.0 HF3; BIG-IP GTM 11.5.x before 11.5.4 and 11.6.x before 11.6.1; BIG-IQ Cloud and Security 4.0.0 through 4.5.0; BIG-IQ Device 4.2.0 through 4.5.0; BIG-IQ ADC 4.5.0; BIG-IQ Centralized Management 4.6.0; and BIG-IQ Cloud and Orchestration 1.0.0 allows remote authenticated administrators to obtain sensitive information via unspecified vectors.
CVE-2016-4967 Fortinet FortiWan (formerly AscernLink) before 4.2.5 allows remote authenticated users to obtain sensitive information from (1) a backup of the device configuration via script/cfg_show.php or (2) PCAP files via script/system/tcpdump.php.
CVE-2016-4860 Yokogawa STARDOM FCN/FCJ controller R1.01 through R4.01 does not require authentication for Logic Designer connections, which allows remote attackers to reconfigure the device or cause a denial of service via a (1) stop application program, (2) change value, or (3) modify application command.
CVE-2016-4845 Cross-site request forgery (CSRF) vulnerability on I-O DATA DEVICE HVL-A2.0, HVL-A3.0, HVL-A4.0, HVL-AT1.0S, HVL-AT2.0, HVL-AT3.0, HVL-AT4.0, HVL-AT2.0A, HVL-AT3.0A, and HVL-AT4.0A devices with firmware before 2.04 allows remote attackers to hijack the authentication of arbitrary users for requests that delete content.
CVE-2016-4820 Cross-site request forgery (CSRF) vulnerability on I-O DATA DEVICE ETX-R devices allows remote attackers to hijack the authentication of arbitrary users.
CVE-2016-4503 Moxa Device Server Web Console 5232-N allows remote attackers to bypass authentication, and consequently modify settings and data, via vectors related to reading a cookie parameter containing a UserId value.
CVE-2016-4500 Moxa UC-7408 LX-Plus devices allow remote authenticated users to write to the firmware, and consequently render a device unusable, by leveraging root access.
CVE-2016-3654 The device management command line interface (CLI) in Palo Alto Networks PAN-OS before 5.0.18, 5.1.x before 5.1.11, 6.0.x before 6.0.13, 6.1.x before 6.1.10, and 7.0.x before 7.0.5H2 allows remote authenticated administrators to execute arbitrary OS commands via an SSH command parameter.
CVE-2016-2314 GlobespanVirata ftpd 1.0, as used on Huawei SmartAX MT882 devices V200R002B022 Arg, allows remote authenticated users to cause a denial of service (device outage) by using the FTP MKD command to create a directory with a long name, and then using certain other commands.
CVE-2016-1459 Cisco IOS 12.4 and 15.0 through 15.5 and IOS XE 3.13 through 3.17 allow remote authenticated users to cause a denial of service (device reload) via crafted attributes in a BGP message, aka Bug ID CSCuz21061.
CVE-2016-1428 Double free vulnerability in Cisco IOS XE 3.15S, 3.16S, and 3.17S allows remote authenticated users to cause a denial of service (device restart) via a sequence of crafted SNMP read requests, aka Bug ID CSCux13174.
CVE-2016-1398 Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware through 1.2.1.4, RV130W devices with firmware through 1.0.2.7, and RV215W devices with firmware through 1.3.0.7 allows remote authenticated users to cause a denial of service (device reload) via a crafted HTTP request, aka Bug ID CSCux86669.
CVE-2016-1397 Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware before 1.2.1.7, RV130W devices with firmware before 1.0.3.16, and RV215W devices with firmware before 1.3.0.8 allows remote authenticated users to cause a denial of service (device reload) via crafted configuration commands in an HTTP request, aka Bug ID CSCux82523.
CVE-2016-1385 The XML parser in Cisco Adaptive Security Appliance (ASA) Software through 9.5.2 allows remote authenticated users to cause a denial of service (instability, memory consumption, or device reload) by leveraging (1) administrative access or (2) Clientless SSL VPN access to provide a crafted XML document, aka Bug ID CSCut14209.
CVE-2016-1333 Cisco IOS 15.5(3)M and 15.6(1)T0a on Cisco 1000 Connected Grid routers allows remote authenticated users to cause a denial of service (device reload) via an SNMP request for unspecified BRIDGE MIB OIDs, aka Bug ID CSCux89878.
CVE-2016-1297 The Device Manager GUI in Cisco Application Control Engine (ACE) 4710 A5 before A5(3.1) allows remote authenticated users to bypass intended RBAC restrictions and execute arbitrary CLI commands with admin privileges via an unspecified parameter in a POST request, aka Bug ID CSCul84801.
CVE-2016-1289 The API in Cisco Prime Infrastructure 1.2 through 3.0 and Evolved Programmable Network Manager (EPNM) 1.2 allows remote attackers to execute arbitrary code or obtain sensitive management information via a crafted HTTP request, as demonstrated by discovering managed-device credentials, aka Bug ID CSCuy10231.
CVE-2016-1207 Cross-site scripting (XSS) vulnerability on I-O DATA DEVICE WN-G300R devices with firmware 1.12 and earlier, WN-G300R2 devices with firmware 1.12 and earlier, and WN-G300R3 devices with firmware 1.01 and earlier allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors.
CVE-2016-10136 An issue was discovered on BLU R1 HD devices with Shanghai Adups software. The content provider named com.adups.fota.sysoper.provider.InfoProvider in the app with a package name of com.adups.fota.sysoper allows any app on the device to read, write, and delete files as the system user. In the com.adups.fota.sysoper app's AndroidManifest.xml file, it sets the android:sharedUserId attribute to a value of android.uid.system which makes it execute as the system user, which is a very privileged user on the device. This allows a third-party app to read, write, and delete files owned by the system user. The third-party app can modify the /data/system/users/0/settings_secure.xml file to add an app as a notification listener to be able to receive the text of notifications as they are received on the device. This also allows the /data/system/users/0/accounts.db to be read which contains authentication tokens for various accounts on the device. The third-party app can obtain privileged information and also modify files to obtain more privileges on the device.
CVE-2015-8677 Memory leak in Huawei S5300EI, S5300SI, S5310HI, and S6300EI Campus series switches with software V200R003C00 before V200R003SPH011 and V200R005C00 before V200R005SPH008; S2350EI and S5300LI Campus series switches with software V200R003C00 before V200R003SPH011, V200R005C00 before V200R005SPH008, and V200R006C00 before V200R006SPH002; S9300, S7700, and S9700 Campus series switches with software V200R003C00 before V200R003SPH011, V200R005C00 before V200R005SPH009, and V200R006C00 before V200R006SPH003; S5720HI and S5720EI Campus series switches with software V200R006C00 before V200R006SPH002; and S2300 and S3300 Campus series switches with software V100R006C05 before V100R006SPH022 allows remote authenticated users to cause a denial of service (memory consumption and device restart) by logging in and out of the (1) HTTPS or (2) SFTP server, related to SSL session information.
CVE-2015-8670 Huawei LogCenter V100R001C10 could allow an authenticated attacker to add abnormal device information to the log collection module, causing denial of service.
CVE-2015-8229 Huawei eSpace U2980 unified gateway with software before V100R001C10 and U2990 with software before V200R001C10 allow remote authenticated users to cause a denial of service via crafted signaling packets from a registered device.
CVE-2015-7931 The Java client in Adcon Telemetry A840 Telemetry Gateway Base Station does not authenticate the station device, which allows man-in-the-middle attackers to spoof devices and obtain sensitive information by reading cleartext packet data, related to the lack of SSL support.
CVE-2015-7394 The datastor kernel module in F5 BIG-IP Analytics, APM, ASM, Link Controller, and LTM 11.1.0 before 12.0.0, BIG-IP AAM 11.4.0 before 12.0.0, BIG-IP AFM, PEM 11.3.0 before 12.0.0, BIG-IP Edge Gateway, WebAccelerator, and WOM 11.1.0 through 11.3.0, BIG-IP GTM 11.1.0 through 11.6.0, BIG-IP PSM 11.1.0 through 11.4.1, BIG-IQ Cloud and Security 4.0.0 through 4.5.0, BIG-IQ Device 4.2.0 through 4.5.0, BIG-IQ ADC 4.5.0, and Enterprise Manager 3.0.0 through 3.1.1 allows remote authenticated users to cause a denial of service or gain privileges by leveraging permission to upload and execute code.
CVE-2015-6379 The XML parser in the management interface in Cisco Adaptive Security Appliance (ASA) Software 8.4 allows remote authenticated users to cause a denial of service (device crash) via a crafted XML document, aka Bug ID CSCut14223.
CVE-2015-6309 Cisco Email Security Appliance (ESA) 8.5.6-106 and 9.6.0-042 allows remote authenticated users to cause a denial of service (file-descriptor consumption and device reload) via crafted HTTP requests, aka Bug ID CSCuw32211.
CVE-2015-6263 The RADIUS client implementation in Cisco IOS 15.4(3)M2.2, when a shared RADIUS secret is configured, allows remote RADIUS servers to cause a denial of service (device reload) via malformed answers, aka Bug ID CSCuu59324.
CVE-2015-5600 The kbdint_next_device function in auth2-chall.c in sshd in OpenSSH through 6.9 does not properly restrict the processing of keyboard-interactive devices within a single connection, which makes it easier for remote attackers to conduct brute-force attacks or cause a denial of service (CPU consumption) via a long and duplicative list in the ssh -oKbdInteractiveDevices option, as demonstrated by a modified client that provides a different password for each pam element on this list.
CVE-2015-5240 Race condition in OpenStack Neutron before 2014.2.4 and 2015.1 before 2015.1.2, when using the ML2 plugin or the security groups AMQP API, allows remote authenticated users to bypass IP anti-spoofing controls by changing the device owner of a port to start with network: before the security group rules are applied.
CVE-2015-4637 The REST API in F5 BIG-IQ Cloud, Device, and Security 4.4.0 and 4.5.0 before HF2 and ADC 4.5.0 before HF2, when configured for LDAP remote authentication and the LDAP server allows anonymous BIND operations, allows remote attackers to obtain an authentication token for arbitrary users by guessing an LDAP user account name.
CVE-2015-4629 Huawei E5756S before V200R002B146D23SP00C00 allows remote attackers to read device configuration information, enable PIN/PUK authentication, and perform other unspecified actions.
CVE-2015-4301 Cisco NX-OS on Nexus 9000 devices 11.1(1c) allows remote authenticated users to cause a denial of service (device hang) via large files that are copied to a device's filesystem, aka Bug ID CSCuu77225.
CVE-2015-4238 The SNMP implementation in Cisco Adaptive Security Appliance (ASA) Software 8.4(7) and 8.6(1.2) allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests during a time of high network traffic, aka Bug ID CSCul02601.
CVE-2015-3911 Huawei E587 Mobile WiFi with firmware before 11.203.30.00.00 allows remote attackers to bypass authentication, change configurations, send messages, and cause a denial of service (device restart) via unspecified vectors.
CVE-2015-3628 The iControl API in F5 BIG-IP LTM, AFM, Analytics, APM, ASM, Link Controller, and PEM 11.3.0 before 11.5.3 HF2 and 11.6.0 before 11.6.0 HF6, BIG-IP AAM 11.4.0 before 11.5.3 HF2 and 11.6.0 before 11.6.0 HF6, BIG-IP Edge Gateway, WebAccelerator, and WOM 11.3.0, BIG-IP GTM 11.3.0 before 11.6.0 HF6, BIG-IP PSM 11.3.0 through 11.4.1, Enterprise Manager 3.1.0 through 3.1.1, BIG-IQ Cloud and Security 4.0.0 through 4.5.0, BIG-IQ Device 4.2.0 through 4.5.0, and BIG-IQ ADC 4.5.0 allows remote authenticated users with the "Resource Administrator" role to gain privileges via an iCall (1) script or (2) handler in a SOAP request to iControl/iControlPortal.cgi.
CVE-2015-2800 The user authentication module in Huawei Campus switches S5700, S5300, S6300, and S6700 with software before V200R001SPH012 and S7700, S9300, and S9700 with software before V200R001SPH015 allows remote attackers to cause a denial of service (device restart) via vectors involving authentication, which trigger an array access violation.
CVE-2015-1514 Multiple SQL injection vulnerabilities in FancyFon FAMOC before 3.17.4 allow (1) remote attackers to execute arbitrary SQL commands via the device ID REST parameter (PATH_INFO) to /ajax.php or (2) remote authenticated users to execute arbitrary SQL commands via the order parameter to index.php.
CVE-2015-10123 An unautheticated remote attacker could send specifically crafted packets to a affected device. If an authenticated user then views that data in a specific page of the web-based management a buffer overflow will be triggered to gain full access of the device.
CVE-2015-1008 SQL injection vulnerability in Emerson AMS Device Manager before 13 allows remote authenticated users to gain privileges via malformed input.
CVE-2015-0771 The IKE implementation in the WS-IPSEC-3 service module in Cisco IOS 12.2 on Catalyst 6500 devices allows remote authenticated users to cause a denial of service (device reload) by sending a crafted message during IPsec tunnel setup, aka Bug ID CSCur70505.
CVE-2015-0768 The Device Work Center (DWC) component in Cisco Prime Network Control System (NCS) 2.1(0.0.85), 2.2(0.0.58), and 2.2(0.0.69) does not properly implement AAA roles, which allows remote authenticated users to bypass intended access restrictions and execute commands via a login session, aka Bug ID CSCur27371.
CVE-2015-0726 The web administration interface on Cisco Wireless LAN Controller (WLC) devices before 7.0.241, 7.1.x through 7.4.x before 7.4.122, and 7.5.x and 7.6.x before 7.6.120 allows remote authenticated users to cause a denial of service (device crash) via unspecified parameters, aka Bug IDs CSCum65159 and CSCum65252.
CVE-2015-0723 The wireless web-authentication subsystem on Cisco Wireless LAN Controller (WLC) devices 7.5.x and 7.6.x before 7.6.120 allows remote attackers to cause a denial of service (process crash and device restart) via a crafted value, aka Bug ID CSCum03269.
CVE-2015-0709 Cisco IOS 15.5S and IOS XE allow remote authenticated users to cause a denial of service (device crash) by leveraging knowledge of the RADIUS secret and sending crafted RADIUS packets, aka Bug ID CSCur21348.
CVE-2015-0687 The SNMP implementation in Cisco IOS 15.1(2)SG4 on Catalyst 4500 devices, when single-switch Virtual Switching System (VSS) is configured, allows remote authenticated users to cause a denial of service (device crash) by performing SNMP polling, aka Bug ID CSCuq04574.
CVE-2015-0686 The SNMP implementation in Cisco NX-OS 6.1(2)I2(3) on Nexus 9000 devices, when a Reset High Availability (HA) policy is configured, allows remote authenticated users to cause a denial of service (device reload) via unspecified vectors, aka Bug ID CSCuq92240.
CVE-2015-0679 The web-authentication functionality on Cisco Wireless LAN Controller (WLC) devices 7.3(103.8) and 7.4(110.0) allows remote attackers to cause a denial of service (device reload) via a malformed password, aka Bug ID CSCui57980.
CVE-2015-0651 Cross-site request forgery (CSRF) vulnerability in the web GUI in Cisco Application Networking Manager (ANM), and Device Manager (DM) on Cisco 4710 Application Control Engine (ACE) appliances, allows remote attackers to hijack the authentication of arbitrary users, aka Bug ID CSCuo99753.
CVE-2015-0611 The administrative web-management portal in Cisco IX 8 (.0.1) and earlier on Cisco TelePresence IX5000 devices does not properly restrict the device-recovery account's access, which allows remote authenticated users to obtain HelpDesk-equivalent privileges by leveraging device-recovery authentication, aka Bug ID CSCus74174.
CVE-2014-9583 common.c in infosvr in ASUS WRT firmware 3.0.0.4.376_1071, 3.0.0.376.2524-g0013f52, and other versions, as used in RT-AC66U, RT-N66U, and other routers, does not properly check the MAC address for a request, which allows remote attackers to bypass authentication and execute arbitrary commands via a NET_CMD_ID_MANU_CMD packet to UDP port 9999. NOTE: this issue was incorrectly mapped to CVE-2014-10000, but that ID is invalid due to its use as an example of the 2014 CVE ID syntax change.
CVE-2014-9566 Multiple SQL injection vulnerabilities in the Manage Accounts page in the AccountManagement.asmx service in the Solarwinds Orion Platform 2015.1, as used in Network Performance Monitor (NPM) before 11.5, NetFlow Traffic Analyzer (NTA) before 4.1, Network Configuration Manager (NCM) before 7.3.2, IP Address Manager (IPAM) before 4.3, User Device Tracker (UDT) before 3.2, VoIP & Network Quality Manager (VNQM) before 4.2, Server & Application Manager (SAM) before 6.2, Web Performance Monitor (WPM) before 2.2, and possibly other Solarwinds products, allow remote authenticated users to execute arbitrary SQL commands via the (1) dir or (2) sort parameter to the (a) GetAccounts or (b) GetAccountGroups endpoint.
CVE-2014-8331 Multiple cross-site request forgery (CSRF) vulnerabilities in Huawei HiLink E3236 before E3276sTCPU-V200R002B470D13SP00C00 and E3276sWebUI-V100R007B100D03SP01C03 and E3276 before E3236sTCPU-V200R002B146D41SP00C00 and E3236sWebUI-V100R007B100D03SP01C03 allow remote attackers to hijack the authentication of administrators for requests that (1) change configuration settings or (2) use device functions.
CVE-2014-8027 The RBAC component in Cisco Secure Access Control System (ACS) allows remote authenticated users to obtain Network Device Administrator privileges for Create, Delete, Read, and Update operations via crafted HTTP requests, aka Bug ID CSCuq79034.
CVE-2014-8007 Cisco Prime Infrastructure allows remote authenticated users to read device-discovery passwords by examining the HTML source code of the Quick Discovery options page, aka Bug ID CSCum00019.
CVE-2014-7281 Cross-site request forgery (CSRF) vulnerability in Shenzhen Tenda Technology Tenda A32 Router with firmware 5.07.53_CN allows remote attackers to hijack the authentication of administrators for requests that reboot the device via a request to goform/SysToolReboot.
CVE-2014-5414 Beckhoff Embedded PC images before 2014-10-22 and Automation Device Specification (ADS) TwinCAT components do not restrict the number of authentication attempts, which makes it easier for remote attackers to obtain access via a brute-force attack.
CVE-2014-4810 IBM Cognos Mobile 10.1.1 before FP3 IF1, 10.2.0 before FP2 IF1, and 10.2.1 before FP4 IF1 preserves a session between the Cognos Mobile server and the Cognos Business Intelligence server after a logoff action on a mobile device, which makes it easier for remote attackers to bypass intended Business Intelligence restrictions by leveraging access to authentication data that was captured before this logoff.
CVE-2014-4631 RSA Adaptive Authentication (On-Premise) 6.0.2.1 through 7.1 P3, when using device binding in a Challenge SOAP call or using the RSA Adaptive Authentication Integration Adapters with Out-of-Band Phone (Authentify) functionality, conducts permanent device binding even when authentication fails, which allows remote attackers to bypass authentication.
CVE-2014-3887 Cross-site scripting (XSS) vulnerability in I-O DATA DEVICE RockDisk with firmware before 1.05e1-2.0.5 allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. NOTE: This vulnerability exists because of an incomplete fix for CVE-2013-4713.
CVE-2014-3299 Cisco IOS allows remote authenticated users to cause a denial of service (device reload) via malformed IPsec packets, aka Bug ID CSCui79745.
CVE-2014-3269 The SNMP module in Cisco IOS XE 3.5E allows remote authenticated users to cause a denial of service (device reload) by polling frequently, aka Bug ID CSCug65204.
CVE-2014-3264 Cisco Adaptive Security Appliance (ASA) Software 9.1(.5) and earlier allows remote authenticated users to cause a denial of service (device reload) via crafted attributes in a RADIUS packet, aka Bug ID CSCun69561.
CVE-2014-0743 The Certificate Authority Proxy Function (CAPF) component in Cisco Unified Communications Manager (Unified CM) 10.0(1) and earlier allows remote attackers to bypass authentication and modify registered-device information via crafted data, aka Bug ID CSCum95468.
CVE-2014-0344 Properties.do in ZOHO ManageEngine OpStor before build 8500 does not properly check privilege levels, which allows remote authenticated users to obtain Admin access by using the name parameter in conjunction with a true value of the edit parameter.
CVE-2014-0056 The l3-agent in OpenStack Neutron 2012.2 before 2013.2.3 does not check the tenant id when creating ports, which allows remote authenticated users to plug ports into the routers of arbitrary tenants via the device id in a port-create command.
CVE-2013-7043 Multiple cross-site request forgery (CSRF) vulnerabilities on Cisco Scientific Atlanta DPR2320R2 routers with software 2.0.2r1262-090417 allow remote attackers to hijack the authentication of administrators for requests that (1) change a password via the Password parameter to goform/RgSecurity; (2) reboot the device via the Restart parameter to goform/restart; (3) modify Wi-Fi settings, as demonstrated by the WpaPreSharedKey parameter to goform/wlanSecurity; or (4) modify parental controls via the ParentalPassword parameter to goform/RgParentalBasic.
CVE-2013-6978 The disaster recovery system (DRS) component in Cisco Unified Communications Manager (UCM) 9.1(1) and earlier allows remote authenticated users to obtain sensitive device information by reading "extraneous information" in HTML source code, aka Bug ID CSCuj39249.
CVE-2013-6922 Multiple cross-site request forgery (CSRF) vulnerabilities in the Seagate BlackArmor NAS 220 devices with firmware sg2000-2000.1331 allow remote attackers to hijack the authentication of administrators for requests that (1) add user accounts via a crafted request to admin/access_control_user_add.php; (2) modify or (3) delete user accounts; (4) perform a factory reset; (5) perform a device reboot; or (6) add, (7) modify, or (8) delete shares and volumes.
CVE-2013-6692 Cisco IOS XE 3.8S(.2) and earlier does not properly use a DHCP pool during assignment of an IP address, which allows remote authenticated users to cause a denial of service (device reload) via an AAA packet that triggers an address requirement, aka Bug ID CSCuh04949.
CVE-2013-6031 The Huawei E355 adapter with firmware 21.157.37.01.910 does not require authentication for API pages, which allows remote attackers to change passwords and settings, or obtain sensitive information, via a direct request to (1) api/wlan/security-settings, (2) api/device/information, (3) api/wlan/basic-settings, (4) api/wlan/mac-filter, (5) api/monitoring/status, or (6) api/dhcp/settings.
CVE-2013-5997 Unspecified vulnerability in the SSH implementation on D-Link Japan DES-3800 devices with firmware before R4.50B58 allows remote authenticated users to cause a denial of service (device hang) via unknown vectors, a different vulnerability than CVE-2013-5998.
CVE-2013-5557 The Proxy Bypass Content Rewriter feature in the WebVPN subsystem in Cisco Adaptive Security Appliance (ASA) Software 9.1(.2) and earlier allows remote authenticated users to cause a denial of service (device crash or error-recovery event) via an HTTP request that triggers a rewrite, aka Bug ID CSCug91577.
CVE-2013-5551 Cisco Adaptive Security Appliance (ASA) Software, when certain same-security-traffic and management-access options are enabled, allows remote authenticated users to cause a denial of service (stack overflow and device reload) by using the clientless SSL VPN portal for internal-resource browsing, aka Bug ID CSCui51199.
CVE-2013-5544 The VPN authentication functionality in Cisco Adaptive Security Appliance (ASA) Software allows remote attackers to cause a denial of service (device reload) by sending many username-from-cert IKE requests, aka Bug ID CSCua91108.
CVE-2013-5516 The Media Snapshot implementation on Cisco TelePresence Multipoint Switch (CTMS) devices allows remote authenticated users to cause a denial of service (device reload) by sending many Media Snapshot requests at the time of a meeting termination, aka Bug ID CSCuh44796.
CVE-2013-5511 The Adaptive Security Device Management (ASDM) remote-management feature in Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.6) does not properly implement the authentication-certificate option, which allows remote attackers to bypass authentication via a TCP session to an ASDM interface, aka Bug ID CSCuh44815.
CVE-2013-4820 Unspecified vulnerability in HP IceWall SSO 8.0 through 10.0, IceWall SSO Agent Option 8.0 through 10.0, IceWall SSO Smart Device Option 10.0, IceWall SSO SAML2 Agent Option 8.0, IceWall SSO JAVA Agent Library 8.0 through 10.0, IceWall Federation Agent 3.0, and IceWall File Manager 3.0 through SP4 allows remote authenticated users to obtain sensitive information via unknown vectors.
CVE-2013-4713 Cross-site scripting (XSS) vulnerability in I-O DATA DEVICE RockDisk with firmware before 1.05e1-2.0.5 allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors.
CVE-2013-4707 The SSH implementation on D-Link Japan DES-3810 devices with firmware before R2.20.011 allows remote authenticated users to cause a denial of service (device hang) by leveraging login access.
CVE-2013-4632 The Huawei Access Router (AR) before V200R002SPC003 allows remote attackers to cause a denial of service (device reset) via a crafted field in a DHCP request, as demonstrated by a request from an IP phone.
CVE-2013-4299 Interpretation conflict in drivers/md/dm-snap-persistent.c in the Linux kernel through 3.11.6 allows remote authenticated users to obtain sensitive information or modify data via a crafted mapping to a snapshot block device.
CVE-2013-3595 The OpenManage web application 2.5 build 1.19 on Dell PowerConnect 3348 1.2.1.3, 3524p 2.0.0.48, and 5324 2.0.1.4 switches allows remote authenticated users to cause a denial of service (device reset) via a direct request to an unspecified OSPF URL.
CVE-2013-3474 The Web Administrator Interface on Cisco Wireless LAN Controller (WLC) devices allows remote authenticated users to cause a denial of service (device crash) by leveraging membership in the Full Manager managers group, Read Only managers group, or Lobby Ambassador managers group, and sending a request that (1) lacks a parameter value or (2) contains a malformed parameter value, aka Bug IDs CSCuh14313, CSCuh14159, CSCuh14368, and CSCuh14436.
CVE-2013-3365 TRENDnet TEW-812DRU router allows remote authenticated users to execute arbitrary commands via shell metacharacters in the (1) wan network prefix to internet/ipv6.asp; (2) remote port to adm/management.asp; (3) pptp username, (4) pptp password, (5) ip, (6) gateway, (7) l2tp username, or (8) l2tp password to internet/wan.asp; (9) NtpDstStart, (10) NtpDstEnd, or (11) NtpDstOffset to adm/time.asp; or (12) device url to adm/management.asp. NOTE: vectors 9, 10, and 11 can be exploited by unauthenticated remote attackers by leveraging CVE-2013-3098.
CVE-2013-1414 Multiple cross-site request forgery (CSRF) vulnerabilities in Fortinet FortiOS on FortiGate firewall devices before 4.3.13 and 5.x before 5.0.2 allow remote attackers to hijack the authentication of administrators for requests that modify (1) settings or (2) policies, or (3) restart the device via a rebootme action to system/maintenance/shutdown.
CVE-2013-1391 Authentication bypass vulnerability in the the web interface in Hunt CCTV, Capture CCTV, Hachi CCTV, NoVus CCTV, and Well-Vision Inc DVR systems allows a remote attacker to retrieve the device configuration.
CVE-2013-1217 The generic input/output control implementation in Cisco IOS does not properly manage buffers, which allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests at the same time, aka Bug ID CSCub41105.
CVE-2013-1199 Race condition in the CIFS implementation in the rewriter module in the Clientless SSL VPN component on Cisco Adaptive Security Appliances (ASA) devices allows remote authenticated users to cause a denial of service (device reload) by accessing resources within multiple sessions, aka Bug ID CSCub58996.
CVE-2013-1150 The authentication-proxy implementation on Cisco Adaptive Security Appliances (ASA) devices with software 7.x before 7.2(5.10), 8.0 before 8.0(5.31), 8.1 and 8.2 before 8.2(5.38), 8.3 before 8.3(2.37), 8.4 before 8.4(5.3), 8.5 and 8.6 before 8.6(1.10), 8.7 before 8.7(1.4), 9.0 before 9.0(1.1), and 9.1 before 9.1(1.2) allows remote attackers to cause a denial of service (device reload) via a crafted URL, aka Bug ID CSCud16590.
CVE-2013-1141 The mDNS snooping functionality on Cisco Wireless LAN Controller (WLC) devices with software 7.4.1.54 and earlier does not properly manage buffers, which allows remote authenticated users to cause a denial of service (device reload) via crafted mDNS packets, aka Bug ID CSCue04153.
CVE-2013-1105 Cisco Wireless LAN Controller (WLC) devices with software 7.0 before 7.0.235.3, 7.1 and 7.2 before 7.2.111.3, and 7.3 before 7.3.101.0 allow remote authenticated users to bypass wireless-management settings and read or modify the device configuration via an SNMP request, aka Bug ID CSCua60653.
CVE-2013-0717 Multiple cross-site request forgery (CSRF) vulnerabilities in the web-based management utility on the NEC AtermWR9500N, AtermWR8600N, AtermWR8370N, AtermWR8160N, AtermWM3600R, and AtermWM3450RN routers allow remote attackers to hijack the authentication of administrators for requests that (1) initialize settings or (2) reboot the device.
CVE-2013-0500 IBM Storwize V7000 Unified 1.3.x and 1.4.x before 1.4.2.0 does not properly handle device files that are created with the NFS protocol but accessed with a non-NFS protocol, which allows remote authenticated users to obtain sensitive information, modify programs or files, or cause a denial of service (device crash) via a (1) CIFS, (2) HTTPS, (3) SCP, or (4) SFTP operation.
CVE-2013-0208 The boot-from-volume feature in OpenStack Compute (Nova) Folsom and Essex, when using nova-volumes, allows remote authenticated users to boot from other users' volumes via a volume id in the block_device_mapping parameter.
CVE-2012-6605 The device-management command-line interface in Palo Alto Networks PAN-OS before 3.1.11 and 4.0.x before 4.0.9 allows remote authenticated users to execute arbitrary code via unspecified vectors, aka Ref ID 34896.
CVE-2012-6604 The device-management command-line interface in Palo Alto Networks PAN-OS before 3.1.11 and 4.0.x before 4.0.9 allows remote authenticated users to execute arbitrary code via unspecified vectors, aka Ref ID 35249.
CVE-2012-6602 The device-management command-line interface in Palo Alto Networks PAN-OS before 3.1.10 and 4.0.x before 4.0.4 allows remote authenticated users to execute arbitrary commands via unspecified vectors, aka Ref ID 30122.
CVE-2012-6600 The device-management command-line interface in Palo Alto Networks PAN-OS 4.0.x before 4.0.9 and 4.1.x before 4.1.2 allows remote authenticated users to execute arbitrary commands via unspecified vectors, aka Ref ID 34502.
CVE-2012-6599 The device-management command-line interface in Palo Alto Networks PAN-OS 4.0.x before 4.0.8 and 4.1.x before 4.1.1 allows remote authenticated users to execute arbitrary commands via unspecified vectors, aka Ref ID 33476.
CVE-2012-6598 The device-management command-line interface in Palo Alto Networks PAN-OS 4.0.x before 4.0.8 allows remote authenticated users to execute arbitrary commands via unspecified vectors, aka Ref ID 33080.
CVE-2012-6595 The device-management command-line interface in Palo Alto Networks PAN-OS 4.0.x before 4.0.9 and 4.1.x before 4.1.2 allows remote authenticated administrators to execute arbitrary commands via unspecified vectors, aka Ref ID 34595.
CVE-2012-6594 The device-management command-line interface in Palo Alto Networks PAN-OS before 3.1.11, 4.0.x before 4.0.8, and 4.1.x before 4.1.1 allows remote authenticated administrators to execute arbitrary commands via unspecified vectors, aka Ref ID 34299.
CVE-2012-6591 The device-management command-line interface in Palo Alto Networks PAN-OS before 3.1.10 and 4.0.x before 4.0.5 allows remote authenticated administrators to execute arbitrary commands via unspecified vectors, aka Ref ID 31116.
CVE-2012-6395 Cisco Adaptive Security Appliances (ASA) devices with firmware 8.4 do not properly validate unspecified input related to UNC share pathnames, which allows remote authenticated users to cause a denial of service (device crash) via unknown vectors, aka Bug ID CSCuc65775.
CVE-2012-6314 Citrix XenDesktop Virtual Desktop Agent (VDA) 5.6.x before 5.6.200, when making changes to the server-side policy that control USB redirection, does not propagate changes to the VDA, which allows authenticated users to retain access to the USB device.
CVE-2012-5991 screens/base/web_auth_custom.html on Cisco Wireless LAN Controller (WLC) devices with software 7.2.110.0 allows remote authenticated users to cause a denial of service (device reload) via a certain buttonClicked value in an internal webauth_type request, aka Bug ID CSCud50209.
CVE-2012-5970 The Huawei E585 device allows remote attackers to cause a denial of service (NULL pointer dereference and device outage) via crafted HTTP requests, as demonstrated by unspecified vulnerability-scanning software.
CVE-2012-5968 The Huawei E585 device does not validate the status of admin sessions, which allows remote attackers to obtain sensitive user information and the session ID, and modify data, by leveraging access to the LAN network.
CVE-2012-5717 Cisco Adaptive Security Appliances (ASA) devices with firmware 8.x through 8.4(1) do not properly manage SSH sessions, which allows remote authenticated users to cause a denial of service (device crash) by establishing multiple sessions, aka Bug ID CSCtc59462.
CVE-2012-5316 Multiple cross-site scripting (XSS) vulnerabilities in Barracuda Spam & Virus Firewall 600 Firmware 4.0.1.009 and earlier allow remote authenticated users to inject arbitrary web script or HTML via (1) Troubleshooting in the Trace route Device module or (2) LDAP Username in the LDAP Configuration module.
CVE-2012-5032 The Flex-VPN load-balancing feature in the ipsec-ikev2 implementation in Cisco IOS before 15.1(1)SY3 does not require authentication, which allows remote attackers to trigger the forwarding of VPN traffic to an attacker-controlled destination, or the discarding of this traffic, by arranging for an arbitrary device to become a cluster member, aka Bug ID CSCub93641.
CVE-2012-5017 Cisco IOS before 15.1(1)SY1 allows remote authenticated users to cause a denial of service (device reload) by establishing a VPN session and then sending malformed IKEv2 packets, aka Bug ID CSCub39268.
CVE-2012-5014 Cisco IOS before 15.1(2)SY allows remote authenticated users to cause a denial of service (device crash) by establishing an SSH session from a client and then placing this client into a (1) slow or (2) idle state, aka Bug ID CSCto87436.
CVE-2012-4687 Post Oak AWAM Bluetooth Reader Traffic System does not use a sufficient source of entropy for private keys, which makes it easier for man-in-the-middle attackers to spoof a device by predicting a key value.
CVE-2012-4659 The AAA functionality in the IPv4 SSL VPN implementations on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.2 before 8.2(5.30) and 8.3 before 8.3(2.34) allows remote attackers to cause a denial of service (device reload) via a crafted authentication response, aka Bug ID CSCtz04566.
CVE-2012-3924 The SSLVPN implementation in Cisco IOS 15.1 and 15.2, when DTLS is enabled, does not properly handle certain outbound ACL configurations, which allows remote authenticated users to cause a denial of service (device crash) via a session involving a PPP over ATM (PPPoA) interface, aka Bug ID CSCty97961.
CVE-2012-3923 The SSLVPN implementation in Cisco IOS 12.4, 15.0, 15.1, and 15.2, when DTLS is not enabled, does not properly handle certain outbound ACL configurations, which allows remote authenticated users to cause a denial of service (device crash) via a session involving a PPP over ATM (PPPoA) interface, aka Bug ID CSCte41827.
CVE-2012-3895 Cisco IOS 15.0 through 15.3 allows remote authenticated users to cause a denial of service (device crash) via an MVPNv6 update, aka Bug ID CSCty89224.
CVE-2012-3721 Profile Manager in Apple Mac OS X before 10.7.5 does not properly perform authentication for the Device Management private interface, which allows attackers to enumerate managed devices via unspecified vectors.
CVE-2012-1365 Cisco Unified Computing System (UCS) 1.4 and 2.0 allows remote authenticated users to cause a denial of service (device reload) via a malformed SNMP request to a Fabric Interconnect (FI) device, aka Bug ID CSCts32463.
CVE-2012-1364 Cisco Unified Computing System (UCS) 1.4 and 2.0 allows remote authenticated users to cause a denial of service (device reload) via a malformed SNMP request to a Fabric Interconnect (FI) device, aka Bug ID CSCts32452.
CVE-2012-1344 Cisco IOS 15.1 and 15.2, when a clientless SSL VPN is configured, allows remote authenticated users to cause a denial of service (device reload) by using a web browser to refresh the SSL VPN portal page, as demonstrated by the Android browser, aka Bug ID CSCtr86328.
CVE-2012-1338 Cisco IOS 15.0 and 15.1 on Catalyst 3560 and 3750 series switches allows remote authenticated users to cause a denial of service (device reload) by completing local web authentication quickly, aka Bug ID CSCts88664.
CVE-2012-0314 Multiple cross-site request forgery (CSRF) vulnerabilities on the eAccess Pocket WiFi (aka GP02) router before 2.00 with firmware 11.203.11.05.168 and earlier allow remote attackers to hijack the authentication of administrators for requests that (1) initialize settings or (2) reboot the device.
CVE-2011-4507 The D-Link DIR-685 router, when certain WPA and WPA2 configurations are used, does not maintain an encrypted wireless network during transfer of a large amount of network traffic, which allows remote attackers to obtain sensitive information or bypass authentication via a Wi-Fi device.
CVE-2011-4498 Cross-site request forgery (CSRF) vulnerability in the web console in Zenprise Device Manager 6.x through 6.1.8 allows remote attackers to hijack the authentication of administrators for requests that wipe mobile devices.
CVE-2011-4231 Cisco IOS 15.1 and 15.2 and IOS XE 3.x, when configured as an IPsec hub with X.509 certificates in use, allows remote authenticated users to cause a denial of service (segmentation fault and device crash) via unspecified vectors, aka Bug ID CSCtq61128.
CVE-2011-2742 EMC RSA Adaptive Authentication On-Premise (AAOP) 6.0.2.1 SP1 Patch 2, SP1 Patch 3, SP2, SP2 Patch 1, and SP3 does not properly perform forensic evaluation upon receipt of device tokens from mobile apps, which might allow remote attackers to bypass intended application restrictions via a mobile device.
CVE-2011-2741 EMC RSA Adaptive Authentication On-Premise (AAOP) 6.0.2.1 SP1 Patch 2, SP1 Patch 3, SP2, SP2 Patch 1, and SP3 does not properly implement Device Recovery and Device Identification, which might allow remote attackers to bypass intended security restrictions on a (1) previously non-registered device or (2) registered device by sending unspecified "data elements."
CVE-2011-0279 HP Multifunction Peripheral (MFP) Digital Sending Software (DSS) 4.91.00 does not properly configure authentication settings of managed devices within device templates, which allows attackers to access these devices via actions that were intended to require authentication.
CVE-2010-5191 Multiple cross-site request forgery (CSRF) vulnerabilities on the Blue Coat ProxyAV appliance before 3.2.6.1 allow remote attackers to hijack the authentication of administrators for requests that (1) change a password, (2) modify a policy, or (3) restart the device.
CVE-2010-4676 Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote authenticated users to cause a denial of service (device crash) via a high volume of IPsec traffic, aka Bug ID CSCsx52748.
CVE-2010-4551 IBM Lotus Notes Traveler before 8.5.1.2 allows remote authenticated users to cause a denial of service (NULL pointer dereference and daemon crash) by omitting the Internet ID field in the person document, and then using an Apple device to (1) accept or (2) decline an invitation.
CVE-2010-4549 IBM Lotus Notes Traveler before 8.5.1.3 on the Nokia s60 device successfully performs a Replace Data operation for a prohibited application, which allows remote authenticated users to bypass intended access restrictions via this operation.
CVE-2010-4354 The remote-access IPSec VPN implementation on Cisco Adaptive Security Appliances (ASA) 5500 series devices, PIX Security Appliances 500 series devices, and VPN Concentrators 3000 series devices responds to an Aggressive Mode IKE Phase I message only when the group name is configured on the device, which allows remote attackers to enumerate valid group names via a series of IKE negotiation attempts, aka Bug ID CSCtj96108, a different vulnerability than CVE-2005-2025.
CVE-2010-4176 plymouth-pretrigger.sh in dracut and udev, when running on Fedora 13 and 14, sets weak permissions for the /dev/systty device file, which allows remote authenticated users to read terminal data from tty0 for local users.
CVE-2010-3050 Cisco IOS before 12.2(33)SXI allows remote authenticated users to cause a denial of service (device reboot).
CVE-2010-2841 Unspecified vulnerability in Cisco Wireless LAN Controller (WLC) software 4.2 before 4.2.209.0; 4.2M before 4.2.207.54M; 5.0, 5.1, and 6.0 before 6.0.196.0; and 5.2 before 5.2.193.11 allows remote authenticated users to cause a denial of service (device reload) via crafted HTTP packets that trigger invalid arguments to the emweb component, aka Bug ID CSCtd16938.
CVE-2010-1776 Find My iPhone on iOS 2.0 through 3.1.3 for iPhone 3G and later and iOS 2.1 through 3.1.3 for iPod touch (2nd generation) and later, when Find My iPhone is disabled, allows remote authenticated users with an associated MobileMe account to wipe the device.
CVE-2010-1645 Cacti before 0.8.7f, as used in Red Hat High Performance Computing (HPC) Solution and other products, allows remote authenticated administrators to execute arbitrary commands via shell metacharacters in (1) the FQDN field of a Device or (2) the Vertical Label field of a Graph Template.
CVE-2010-0597 Unspecified vulnerability in Cisco Mediator Framework 1.5.1 before 1.5.1.build.14-eng, 2.2 before 2.2.1.dev.1, and 3.0 before 3.0.9.release.1 on the Cisco Network Building Mediator NBM-2400 and NBM-4800 and the Richards-Zeta Mediator 2500 allows remote authenticated users to read or modify the device configuration, and gain privileges or cause a denial of service (device reload), via a (1) XML RPC or (2) XML RPC over HTTPS request, aka Bug ID CSCtb83618.
CVE-2010-0596 Unspecified vulnerability in Cisco Mediator Framework 2.2 before 2.2.1.dev.1 and 3.0 before 3.0.9.release.1 on the Cisco Network Building Mediator NBM-2400 and NBM-4800 and the Richards-Zeta Mediator 2500 allows remote authenticated users to read or modify the device configuration, and gain privileges, via a (1) HTTP or (2) HTTPS request, aka Bug ID CSCtb83607.
CVE-2009-5040 CallManager Express (CME) on Cisco IOS before 15.0(1)XA allows remote authenticated users to cause a denial of service (device crash) by using an extension mobility (EM) phone to interact with the menu for SNR number changes, aka Bug ID CSCta63555.
CVE-2009-1797 Multiple cross-site request forgery (CSRF) vulnerabilities on the Network Management Card (NMC) on American Power Conversion (APC) Switched Rack PDU (aka Rack Mount Power Distribution) devices and other devices allow remote attackers to hijack the authentication of (1) administrator or (2) device users for requests that create new administrative users or have unspecified other impact.
CVE-2009-1203 WebVPN on the Cisco Adaptive Security Appliances (ASA) device with software 8.0(4), 8.1.2, and 8.2.1 does not properly distinguish its own login screen from the login screens it produces for third-party (1) FTP and (2) CIFS servers, which makes it easier for remote attackers to trick a user into sending WebVPN credentials to an arbitrary server via a URL associated with that server, aka Bug ID CSCsy80709.
CVE-2009-1164 The administrative web interface on the Cisco Wireless LAN Controller (WLC) platform 4.2 before 4.2.205.0 and 5.x before 5.2.178.0, as used in Cisco 1500 Series, 2000 Series, 2100 Series, 4100 Series, 4200 Series, and 4400 Series Wireless Services Modules (WiSM), WLC Modules for Integrated Services Routers, and Catalyst 3750G Integrated Wireless LAN Controllers, allows remote attackers to cause a denial of service (device reload) via a malformed response to a (1) HTTP or (2) HTTPS authentication request, aka Bug ID CSCsx03715.
CVE-2009-1155 Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 7.1(1) through 7.1(2)82, 7.2 before 7.2(4)27, 8.0 before 8.0(4)25, and 8.1 before 8.1(2)15, when AAA override-account-disable is entered in a general-attributes field, allow remote attackers to bypass authentication and establish a VPN session to an ASA device via unspecified vectors.
CVE-2009-0695 hagent.exe in Wyse Device Manager (WDM) 4.7.x does not require authentication for commands, which allows remote attackers to obtain management access via a crafted query, as demonstrated by a V52 query that triggers a power-off action.
CVE-2009-0615 Directory traversal vulnerability in Cisco Application Networking Manager (ANM) before 2.0 and Application Control Engine (ACE) Device Manager before A3(2.1) allows remote authenticated users to read or modify arbitrary files via unspecified vectors, related to "invalid directory permissions."
CVE-2009-0059 The Cisco Wireless LAN Controller (WLC), Cisco Catalyst 6500 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.x before 4.2.176.0 and 5.2.x before 5.2.157.0 allow remote attackers to cause a denial of service (device reload) via a web authentication (aka WebAuth) session that includes a malformed POST request to login.html.
CVE-2009-0058 The Cisco Wireless LAN Controller (WLC), Cisco Catalyst 6500 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.x before 4.2.176.0 and 5.x before 5.2 allow remote attackers to cause a denial of service (web authentication outage or device reload) via unspecified network traffic, as demonstrated by a vulnerability scanner.
CVE-2009-0052 The Atheros wireless driver, as used in Netgear WNDAP330 Wi-Fi access point with firmware 2.1.11 and other versions before 3.0.3 on the Atheros AR9160-BC1A chipset, and other products, allows remote authenticated users to cause a denial of service (device reboot or hang) and possibly execute arbitrary code via a truncated reserved management frame.
CVE-2008-7020 McAfee SafeBoot Device Encryption 4 build 4750 and earlier stores pre-boot authentication passwords in the BIOS Keyboard buffer and does not clear this buffer after use, which allows local users to obtain sensitive information by reading the physical memory locations associated with this buffer.
CVE-2008-5563 Aruba Mobility Controller 2.4.8.x-FIPS, 2.5.x, 3.1.x, 3.2.x, 3.3.1.x, and 3.3.2.x allows remote attackers to cause a denial of service (device crash) via a malformed Extensible Authentication Protocol (EAP) frame.
CVE-2008-5382 Cross-site request forgery (CSRF) vulnerability in I-O DATA DEVICE HDL-F160, HDL-F250, HDL-F300, and HDL-F320 firmware before 1.02 allows remote attackers to (1) change a configuration or (2) delete files as an authenticated user via unknown vectors. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.
CVE-2008-4540 Windows Mobile 6 on the HTC Hermes device makes WLAN passwords available to an auto-completion mechanism for the password input field, which allows physically proximate attackers to bypass password authentication and obtain WLAN access.
CVE-2008-4500 Serv-U 7.0.0.1 through 7.3, including 7.2.0.1, allows remote authenticated users to cause a denial of service (CPU consumption) via a crafted stou command, probably related to MS-DOS device names, as demonstrated using "con:1".
CVE-2008-2733 Cisco PIX and Adaptive Security Appliance (ASA) 5500 devices 7.2 before 7.2(4)2, 8.0 before 8.0(3)14, and 8.1 before 8.1(1)4, when configured as a client VPN endpoint, do not properly process IPSec client authentication, which allows remote attackers to cause a denial of service (device reload) via a crafted authentication attempt, aka Bug ID CSCso69942.
CVE-2008-1197 The Marvell driver for the Netgear WN802T Wi-Fi access point with firmware 1.3.16 on the Marvell 88W8361P-BEM1 chipset does not properly parse the SSID information element in an association request, which allows remote authenticated users to cause a denial of service (device reboot or hang) or possibly execute arbitrary code via a "Null SSID."
CVE-2008-1144 The Marvell driver for the Netgear WN802T Wi-Fi access point with firmware 1.3.16 on the Marvell 88W8361P-BEM1 chipset does not properly parse EAPoL-Key packets, which allows remote authenticated users to cause a denial of service (device reboot or hang) or possibly execute arbitrary code via a malformed EAPoL-Key packet with a crafted "advertised length."
CVE-2008-0535 Unspecified vulnerability in the SSH server in (1) Cisco Service Control Engine (SCE) before 3.1.6, and (2) Icon Labs Iconfidant SSH before 2.3.8, allows remote attackers to cause a denial of service (device instability) via "SSH credentials that attempt to change the authentication method," aka Bug ID CSCsm14239.
CVE-2007-5651 Unspecified vulnerability in the Extensible Authentication Protocol (EAP) implementation in Cisco IOS 12.3 and 12.4 on Cisco Access Points and 1310 Wireless Bridges (Wireless EAP devices), IOS 12.1 and 12.2 on Cisco switches (Wired EAP devices), and CatOS 6.x through 8.x on Cisco switches allows remote attackers to cause a denial of service (device reload) via a crafted EAP Response Identity packet.
CVE-2007-5474 The driver for the Linksys WRT350N Wi-Fi access point with firmware 2.00.17 on the Atheros AR5416-AC1E chipset does not properly parse the Atheros vendor-specific information element in an association request, which allows remote authenticated users to cause a denial of service (device reboot or hang) or possibly execute arbitrary code via an Atheros information element with an invalid length, as demonstrated by an element that is too long.
CVE-2007-4632 Cisco IOS 12.2E, 12.2F, and 12.2S places a "no login" line into the VTY configuration when an administrator makes certain changes to a (1) VTY/AUX or (2) CONSOLE setting on a device without AAA enabled, which allows remote attackers to bypass authentication and obtain a terminal session, a different vulnerability than CVE-1999-0293 and CVE-2005-2105.
CVE-2007-4319 The management interface in ZyNOS firmware 3.62(WK.6) on the Zyxel Zywall 2 device allows remote authenticated administrators to cause a denial of service (infinite reboot loop) via invalid configuration data. NOTE: this issue might not cross privilege boundaries, and it might be resultant from CSRF; if so, then it should not be included in CVE.
CVE-2007-4318 Cross-site scripting (XSS) vulnerability in Forms/General_1 in the management interface in ZyNOS firmware 3.62(WK.6) on the Zyxel Zywall 2 device allows remote authenticated administrators to inject arbitrary web script or HTML via the sysSystemName parameter.
CVE-2007-4263 Unspecified vulnerability in the server side of the Secure Copy (SCP) implementation in Cisco 12.2-based IOS allows remote authenticated users to read, write or overwrite any file on the device's filesystem via unknown vectors.
CVE-2007-1590 The Grandstream BudgeTone 200 IP phone, with program 1.1.1.14 and bootloader 1.1.1.5, allows remote attackers to cause a denial of service (device crash) via SIP (1) INVITE, (2) CANCEL, or unspecified other messages with a WWW-Authenticate header containing a crafted Digest domain.
CVE-2007-0965 Cisco FWSM 3.x before 3.1(3.2), when authentication is configured to use "aaa authentication match" or "aaa authentication include", allows remote attackers to cause a denial of service (device reboot) via a long HTTP request.
CVE-2007-0964 Cisco FWSM 3.x before 3.1(3.18), when authentication is configured to use "aaa authentication match" or "aaa authentication include", allows remote attackers to cause a denial of service (device reboot) via a malformed HTTPS request.
CVE-2007-0435 T-Com Speedport 500V routers with firmware 1.31 allow remote attackers to bypass authentication and reconfigure the device via a LOGINKEY=TECOM cookie value.
CVE-2006-5782 radexecd.exe in HP OpenView Client Configuraton Manager (CCM) does not require authentication before executing commands in the installation directory, which allows remote attackers to cause a denial of service (reboot) by calling radbootw.exe or create arbitrary files by calling radcrecv.
CVE-2006-0023 Microsoft Windows XP SP1 and SP2 before August 2004, and possibly other operating systems and versions, uses insecure default ACLs that allow the Authenticated Users group to gain privileges by modifying critical configuration information for the (1) Simple Service Discovery Protocol (SSDP), (2) Universal Plug and Play Device Host (UPnP), (3) NetBT, (4) SCardSvr, (5) DHCP, and (6) DnsCache services, aka "Permissive Windows Services DACLs." NOTE: the NetBT, SCardSvr, DHCP, DnsCache already require privileged access to exploit.
CVE-2005-4771 Trusted Mobility Agent PC Policy in Trust Digital Trusted Mobility Suite provides a cancel button that bypasses the domain-authentication prompt, which allows local users to sync a handheld (PDA) device despite a policy setting that sync is unauthorized.
CVE-2005-2504 The System Profiler in Mac OS X 10.4.2 labels a Bluetooth device with "Requires Authentication: No" even when the user has selected the "Require pairing for security" option, which could confuse users about which setting is valid.
CVE-2005-1020 Secure Shell (SSH) 2 in Cisco IOS 12.0 through 12.3 allows remote attackers to cause a denial of service (device reload) (1) via a username that contains a domain name when using a TACACS+ server to authenticate, (2) when a new SSH session is in the login phase and a currently logged in user issues a send command, or (3) when IOS is logging messages and an SSH session is terminated while the server is sending data.
CVE-2004-1459 Cisco Secure Access Control Server (ACS) 3.2, when configured as a Light Extensible Authentication Protocol (LEAP) RADIUS proxy, allows remote attackers to cause a denial of service (device crash) via certain LEAP authentication requests.
CVE-2004-0923 CUPS 1.1.20 and earlier records authentication information for a device URI in the error_log file, which allows local users to obtain user names and passwords.
CVE-2003-1205 Crob FTP Server 2.60.1 allows remote authenticated users to cause a denial of service (crash) by renaming a file to the "con" MS-DOS device name.
CVE-2002-1147 The HTTP administration interface for HP Procurve 4000M Switch firmware before C.09.16, with stacking features and remote administration enabled, does not authenticate requests to reset the device, which allows remote attackers to cause a denial of service via a direct request to the device_reset CGI program.
CVE-2002-1069 The remote administration capability for the D-Link DI-804 router 4.68 allows remote attackers to bypass authentication and release DHCP addresses or obtain sensitive information via a direct web request to the pages (1) release.htm, (2) Device Status, or (3) Device Information.
CVE-2002-0570 The encrypted loop device in Linux kernel 2.4.10 and earlier does not authenticate the entity that is encrypting data, which allows local users to modify encrypted data without knowing the key.
CVE-2001-1425 The challenge-response authentication of the EXPERT user for Alcatel Speed Touch running firmware KHDSAA.108 and KHDSAA.132 through KHDSAA.134 allows remote attackers to gain privileges by directly computing the response based on information that is provided by the device during login.
CVE-2001-0903 Linear key exchange process in High-bandwidth Digital Content Protection (HDCP) System allows remote attackers to access data as plaintext, avoid device blacklists, clone devices, and create new device keyvectors by computing and using alternate key combinations for authentication.
CVE-2001-0537 HTTP server for Cisco IOS 11.3 to 12.2 allows attackers to bypass authentication and execute arbitrary commands, when local authorization is being used, by specifying a high access level in the URL.
Back to top
  
You can also search by reference using the CVE Reference Maps.
For More Information:  CVE Request Web Form (select “Other” from dropdown)