Search Results
There are 80 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2023-7025 | A vulnerability was found in KylinSoft hedron-domain-hook up to 3.8.0.12-0k0.5. It has been declared as critical. This vulnerability affects the function init_kcm of the component DBus Handler. The manipulation leads to improper access controls. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. VDB-248578 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-6320 | A command injection vulnerability exists in the com.webos.service.connectionmanager/tv/setVlanStaticAddress endpoint on webOS versions 5 and 6. A series of specially crafted requests can lead to command execution as the dbus user. An attacker can make authenticated requests to trigger this vulnerability. Full versions and TV models affected: * webOS 5.5.0 - 04.50.51 running on OLED55CXPUA * webOS 6.3.3-442 (kisscurl-kinglake) - 03.36.50 running on OLED48C1PUB |
| CVE-2023-38471 | A vulnerability was found in Avahi. A reachable assertion exists in the dbus_set_host_name function. |
| CVE-2023-34969 | D-Bus before 1.15.6 sometimes allows unprivileged users to crash dbus-daemon. If a privileged user with control over the dbus-daemon is using the org.freedesktop.DBus.Monitoring interface to monitor message bus traffic, then an unprivileged user with the ability to connect to the same dbus-daemon can cause a dbus-daemon crash under some circumstances via an unreplyable message. When done on the well-known system bus, this is a denial-of-service vulnerability. The fixed versions are 1.12.28, 1.14.8, and 1.15.6. |
| CVE-2023-1981 | A vulnerability was found in the avahi library. This flaw allows an unprivileged user to make a dbus call, causing the avahi daemon to crash. |
| CVE-2022-42012 | An issue was discovered in D-Bus before 1.12.24, 1.13.x and 1.14.x before 1.14.4, and 1.15.x before 1.15.2. An authenticated attacker can cause dbus-daemon and other programs that use libdbus to crash by sending a message with attached file descriptors in an unexpected format. |
| CVE-2022-42011 | An issue was discovered in D-Bus before 1.12.24, 1.13.x and 1.14.x before 1.14.4, and 1.15.x before 1.15.2. An authenticated attacker can cause dbus-daemon and other programs that use libdbus to crash when receiving a message where an array length is inconsistent with the size of the element type. |
| CVE-2022-42010 | An issue was discovered in D-Bus before 1.12.24, 1.13.x and 1.14.x before 1.14.4, and 1.15.x before 1.15.2. An authenticated attacker can cause dbus-daemon and other programs that use libdbus to crash when receiving a message with certain invalid type signatures. |
| CVE-2022-31213 | An issue was discovered in dbus-broker before 31. Multiple NULL pointer dereferences can be found when supplying a malformed XML config file. |
| CVE-2022-31212 | An issue was discovered in dbus-broker before 31. It depends on c-uitl/c-shquote to parse the DBus service's Exec line. c-shquote contains a stack-based buffer over-read if a malicious Exec line is supplied. |
| CVE-2021-45810 | GlobalProtect-openconnect versions prior to 2.0.0 (exclusive) are affected by incorrect access control in GPService through DBUS, GUI. The way GlobalProtect-Openconnect is set up enables arbitrary users to start a VPN connection to arbitrary servers. By hosting an openconnect compatible server, the attack can redirect the entire host's traffic via their own server. |
| CVE-2021-45809 | GlobalProtect-openconnect versions prior to 1.4.3 are affected by incorrect access control in GPService through DBUS, GUI Application. The way GlobalProtect-Openconnect is set up enables arbitrary users to execute commands as root by submitting the `--script=<script>` parameter. |
| CVE-2021-41133 | Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux. In versions prior to 1.10.4 and 1.12.0, Flatpak apps with direct access to AF_UNIX sockets such as those used by Wayland, Pipewire or pipewire-pulse can trick portals and other host-OS services into treating the Flatpak app as though it was an ordinary, non-sandboxed host-OS process. They can do this by manipulating the VFS using recent mount-related syscalls that are not blocked by Flatpak's denylist seccomp filter, in order to substitute a crafted `/.flatpak-info` or make that file disappear entirely. Flatpak apps that act as clients for AF_UNIX sockets such as those used by Wayland, Pipewire or pipewire-pulse can escalate the privileges that the corresponding services will believe the Flatpak app has. Note that protocols that operate entirely over the D-Bus session bus (user bus), system bus or accessibility bus are not affected by this. This is due to the use of a proxy process `xdg-dbus-proxy`, whose VFS cannot be manipulated by the Flatpak app, when interacting with these buses. Patches exist for versions 1.10.4 and 1.12.0, and as of time of publication, a patch for version 1.8.2 is being planned. There are no workarounds aside from upgrading to a patched version. |
| CVE-2021-3939 | Ubuntu-specific modifications to accountsservice (in patch file debian/patches/0010-set-language.patch) caused the fallback_locale variable, pointing to static storage, to be freed, in the user_change_language_authorized_cb function. This is reachable via the SetLanguage dbus function. This is fixed in versions 0.6.55-0ubuntu12~20.04.5, 0.6.55-0ubuntu13.3, 0.6.55-0ubuntu14.1. |
| CVE-2021-3502 | A flaw was found in avahi 0.8-5. A reachable assertion is present in avahi_s_host_name_resolver_start function allowing a local attacker to crash the avahi service by requesting hostname resolutions through the avahi socket or dbus methods for invalid hostnames. The highest threat from this vulnerability is to the service availability. |
| CVE-2021-33590 | GattLib 0.3-rc1 has a stack-based buffer over-read in get_device_path_from_mac in dbus/gattlib.c. |
| CVE-2021-25433 | Improper authorization vulnerability in Tizen factory reset policy prior to Firmware update JUL-2021 Release allows untrusted applications to perform factory reset using dbus signal. |
| CVE-2021-23556 | The package guake before 3.8.5 are vulnerable to Exposed Dangerous Method or Function due to the exposure of execute_command and execute_command_by_uuid methods via the d-bus interface, which makes it possible for a malicious user to run an arbitrary command via the d-bus method. **Note:** Exploitation requires the user to have installed another malicious program that will be able to send dbus signals or run terminal commands. |
| CVE-2020-35512 | A use-after-free flaw was found in D-Bus Development branch <= 1.13.16, dbus-1.12.x stable branch <= 1.12.18, and dbus-1.10.x and older branches <= 1.10.30 when a system has multiple usernames sharing the same UID. When a set of policy rules references these usernames, D-Bus may free some memory in the heap, which is still used by data structures necessary for the other usernames sharing the UID, possibly leading to a crash or other undefined behaviors |
| CVE-2020-1712 | A heap use-after-free vulnerability was found in systemd before version v245-rc1, where asynchronous Polkit queries are performed while handling dbus messages. A local unprivileged attacker can abuse this flaw to crash systemd services or potentially execute code and elevate their privileges, by sending specially crafted dbus messages. |
| CVE-2020-1690 | An improper authorization flaw was discovered in openstack-selinux's applied policy where it does not prevent a non-root user in a container from privilege escalation. A non-root attacker in one or more Red Hat OpenStack (RHOSP) containers could send messages to the dbus. With access to the dbus, the attacker could start or stop services, possibly causing a denial of service. Versions before openstack-selinux 0.8.24 are affected. |
| CVE-2020-16128 | The aptdaemon DBus interface disclosed file existence disclosure by setting Terminal/DebconfSocket properties, aka GHSL-2020-192 and GHSL-2020-196. This affected versions prior to 1.1.1+bzr982-0ubuntu34.1, 1.1.1+bzr982-0ubuntu32.3, 1.1.1+bzr982-0ubuntu19.5, 1.1.1+bzr982-0ubuntu14.5. |
| CVE-2020-16125 | gdm3 versions before 3.36.2 or 3.38.2 would start gnome-initial-setup if gdm3 can't contact the accountservice service via dbus in a timely manner; on Ubuntu (and potentially derivatives) this could be be chained with an additional issue that could allow a local user to create a new privileged account. |
| CVE-2020-12049 | An issue was discovered in dbus >= 1.3.0 before 1.12.18. The DBusServer in libdbus, as used in dbus-daemon, leaks file descriptors when a message exceeds the per-message file descriptor limit. A local attacker with access to the D-Bus system bus or another system service's private AF_UNIX socket could use this to make the system service reach its file descriptor limit, denying service to subsequent D-Bus clients. |
| CVE-2019-7443 | KDE KAuth before 5.55 allows the passing of parameters with arbitrary types to helpers running as root over DBus via DBusHelperProxy.cpp. Certain types can cause crashes, and trigger the decoding of arbitrary images with dynamically loaded plugins. In other words, KAuth unintentionally causes this plugin code to run as root, which increases the severity of any possible exploitation of a plugin vulnerability. |
| CVE-2019-6498 | GattLib 0.2 has a stack-based buffer over-read in gattlib_connect in dbus/gattlib.c because strncpy is misused. |
| CVE-2019-25058 | An issue was discovered in USBGuard before 1.1.0. On systems with the usbguard-dbus daemon running, an unprivileged user could make USBGuard allow all USB devices to be connected in the future. |
| CVE-2019-14822 | A flaw was discovered in ibus in versions before 1.5.22 that allows any unprivileged user to monitor and send method calls to the ibus bus of another user due to a misconfiguration in the DBus server setup. A local attacker may use this flaw to intercept all keystrokes of a victim user who is using the graphical interface, change the input method engine, or modify other input related configurations of the victim user. |
| CVE-2019-12749 | dbus before 1.10.28, 1.12.x before 1.12.16, and 1.13.x before 1.13.12, as used in DBusServer in Canonical Upstart in Ubuntu 14.04 (and in some, less common, uses of dbus-daemon), allows cookie spoofing because of symlink mishandling in the reference implementation of DBUS_COOKIE_SHA1 in the libdbus library. (This only affects the DBUS_COOKIE_SHA1 authentication mechanism.) A malicious client with write access to its own home directory could manipulate a ~/.dbus-keyrings symlink to cause a DBusServer with a different uid to read and write in unintended locations. In the worst case, this could result in the DBusServer reusing a cookie that is known to the malicious client, and treating that cookie as evidence that a subsequent client connection came from an attacker-chosen uid, allowing authentication bypass. |
| CVE-2018-6560 | In dbus-proxy/flatpak-proxy.c in Flatpak before 0.8.9, and 0.9.x and 0.10.x before 0.10.3, crafted D-Bus messages to the host can be used to break out of the sandbox, because whitespace handling in the proxy is not identical to whitespace handling in the daemon. |
| CVE-2017-8849 | smb4k before 2.0.1 allows local users to gain root privileges by leveraging failure to verify arguments to the mount helper DBUS service. |
| CVE-2017-8422 | KDE kdelibs before 4.14.32 and KAuth before 5.34 allow local users to gain root privileges by spoofing a callerID and leveraging a privileged helper app. |
| CVE-2017-5084 | Inappropriate implementation in image-burner in Google Chrome OS prior to 59.0.3071.92 allowed a local attacker to read local files via dbus-send commands to a BurnImage D-Bus endpoint. |
| CVE-2017-2663 | It was found that subscription-manager's DBus interface before 1.19.4 let unprivileged user access the com.redhat.RHSM1.Facts.GetFacts and com.redhat.RHSM1.Config.Set methods. An unprivileged local attacker could use these methods to gain access to private information, or launch a privilege escalation attack. |
| CVE-2017-1000200 | tcmu-runner version 1.0.5 to 1.2.0 is vulnerable to a dbus triggered NULL pointer dereference in the tcmu-runner daemon's on_unregister_handler() function resulting in denial of service |
| CVE-2015-8612 | The EnableNetwork method in the Network class in plugins/mechanism/Network.py in Blueman before 2.0.3 allows local users to gain privileges via the dhcp_handler argument. |
| CVE-2015-3643 | usb-creator before 0.2.38.3ubuntu0.1 on Ubuntu 12.04 LTS, before 0.2.56.3ubuntu0.1 on Ubuntu 14.04 LTS, before 0.2.62ubuntu0.3 on Ubuntu 14.10, and before 0.2.67ubuntu0.1 on Ubuntu 15.04 allows local users to gain privileges by leveraging a missing call check_polkit for the KVMTest method. |
| CVE-2015-3151 | Directory traversal vulnerability in abrt-dbus in Automatic Bug Reporting Tool (ABRT) allows local users to read, write to, or change ownership of arbitrary files via unspecified vectors to the (1) NewProblem, (2) GetInfo, (3) SetElement, or (4) DeleteElement method. |
| CVE-2015-3150 | abrt-dbus in Automatic Bug Reporting Tool (ABRT) allows local users to delete or change the ownership of arbitrary files via the problem directory argument to the (1) ChownProblemDir, (2) DeleteElement, or (3) DeleteProblem method. |
| CVE-2015-1327 | Content Hub before version 0.0+15.04.20150331-0ubuntu1.0 DBUS API only requires a file path for a content item, it doesn't actually require the confined app have access to the file to create a transfer. This could allow a malicious application using the DBUS API to export file:///etc/passwd which would then send a copy of that file to another app. |
| CVE-2015-1323 | The simulate dbus method in aptdaemon before 1.1.1+bzr982-0ubuntu3.1 as packaged in Ubuntu 15.04, before 1.1.1+bzr980-0ubuntu1.1 as packaged in Ubuntu 14.10, before 1.1.1-1ubuntu5.2 as packaged in Ubuntu 14.04 LTS, before 0.43+bzr805-0ubuntu10 as packaged in Ubuntu 12.04 LTS allows local users to obtain sensitive information, or access files with root permissions. |
| CVE-2015-0245 | D-Bus 1.4.x through 1.6.x before 1.6.30, 1.8.x before 1.8.16, and 1.9.x before 1.9.10 does not validate the source of ActivationFailure signals, which allows local users to cause a denial of service (activation failure error returned) by leveraging a race condition involving sending an ActivationFailure signal before systemd responds. |
| CVE-2014-8156 | The D-Bus security policy files in /etc/dbus-1/system.d/*.conf in fso-gsmd 0.12.0-3, fso-frameworkd 0.9.5.9+git20110512-4, and fso-usaged 0.12.0-2 as packaged in Debian, the upstream cornucopia.git (fsoaudiod, fsodatad, fsodeviced, fsogsmd, fsonetworkd, fsotdld, fsousaged) git master on 2015-01-19, the upstream framework.git 0.10.1 and git master on 2015-01-19, phonefsod 0.1+git20121018-1 as packaged in Debian, Ubuntu and potentially other packages, and potentially other fso modules do not properly filter D-Bus message paths, which might allow local users to cause a denial of service (dbus-daemon memory consumption), or execute arbitrary code as root by sending a crafted D-Bus message to any D-Bus system service. |
| CVE-2014-3639 | The dbus-daemon in D-Bus before 1.6.24 and 1.8.x before 1.8.8 does not properly close old connections, which allows local users to cause a denial of service (incomplete connection consumption and prevention of new connections) via a large number of incomplete connections. |
| CVE-2014-3638 | The bus_connections_check_reply function in config-parser.c in D-Bus before 1.6.24 and 1.8.x before 1.8.8 allows local users to cause a denial of service (CPU consumption) via a large number of method calls. |
| CVE-2014-3637 | D-Bus 1.3.0 through 1.6.x before 1.6.24 and 1.8.x before 1.8.8 does not properly close connections for processes that have terminated, which allows local users to cause a denial of service via a D-bus message containing a D-Bus connection file descriptor. |
| CVE-2014-3636 | D-Bus 1.3.0 through 1.6.x before 1.6.24 and 1.8.x before 1.8.8 allows local users to (1) cause a denial of service (prevention of new connections and connection drop) by queuing the maximum number of file descriptors or (2) cause a denial of service (disconnect) via multiple messages that combine to have more than the allowed number of file descriptors for a single sendmsg call. |
| CVE-2014-3635 | Off-by-one error in D-Bus 1.3.0 through 1.6.x before 1.6.24 and 1.8.x before 1.8.8, when running on a 64-bit system and the max_message_unix_fds limit is set to an odd number, allows local users to cause a denial of service (dbus-daemon crash) or possibly execute arbitrary code by sending one more file descriptor than the limit, which triggers a heap-based buffer overflow or an assertion failure. |
| CVE-2014-3533 | dbus 1.3.0 before 1.6.22 and 1.8.x before 1.8.6 allows local users to cause a denial of service (disconnect) via a certain sequence of crafted messages that cause the dbus-daemon to forward a message containing an invalid file descriptor. |
| CVE-2014-3532 | dbus 1.3.0 before 1.6.22 and 1.8.x before 1.8.6, when running on Linux 2.6.37-rc4 or later, allows local users to cause a denial of service (system-bus disconnect of other services or applications) by sending a message containing a file descriptor, then exceeding the maximum recursion depth before the initial message is forwarded. |
| CVE-2014-3477 | The dbus-daemon in D-Bus 1.2.x through 1.4.x, 1.6.x before 1.6.20, and 1.8.x before 1.8.4, sends an AccessDenied error to the service instead of a client when the client is prohibited from accessing the service, which allows local users to cause a denial of service (initialization failure and exit) or possibly conduct a side-channel attack via a D-Bus message to an inactive service. |
| CVE-2013-4325 | The check_permission_v1 function in base/pkit.py in HP Linux Imaging and Printing (HPLIP) through 3.13.9 does not properly use D-Bus for communication with a polkit authority, which allows local users to bypass intended access restrictions by leveraging a PolkitUnixProcess PolkitSubject race condition via a (1) setuid process or (2) pkexec process. |
| CVE-2013-4288 | Race condition in PolicyKit (aka polkit) allows local users to bypass intended PolicyKit restrictions and gain privileges by starting a setuid or pkexec process before the authorization check is performed, related to (1) the polkit_unix_process_new API function, (2) the dbus API, or (3) the --process (unix-process) option for authorization to pkcheck. |
| CVE-2013-2168 | The _dbus_printf_string_upper_bound function in dbus/dbus-sysdeps-unix.c in D-Bus (aka DBus) 1.4.x before 1.4.26, 1.6.x before 1.6.12, and 1.7.x before 1.7.4 allows local users to cause a denial of service (service crash) via a crafted message. |
| CVE-2013-1061 | dbus/SoftwarePropertiesDBus.py in Software Properties 0.92.17 before 0.92.17.3, 0.92.9 before 0.92.9.3, and 0.82.7 before 0.82.7.5 does not properly use D-Bus for communication with a polkit authority, which allows local users to bypass intended access restrictions by leveraging a PolkitUnixProcess PolkitSubject race condition via a (1) setuid process or (2) pkexec process, a related issue to CVE-2013-4288. |
| CVE-2013-0292 | The dbus_g_proxy_manager_filter function in dbus-gproxy in Dbus-glib before 0.100.1 does not properly verify the sender of NameOwnerChanged signals, which allows local users to gain privileges via a spoofed signal. |
| CVE-2012-4425 | libgio, when used in setuid or other privileged programs in spice-gtk and possibly other products, allows local users to gain privileges and execute arbitrary code via the DBUS_SYSTEM_BUS_ADDRESS environment variable. NOTE: it could be argued that this is a vulnerability in the applications that do not cleanse environment variables, not in libgio itself. |
| CVE-2012-3524 | libdbus 1.5.x and earlier, when used in setuid or other privileged programs in X.org and possibly other products, allows local users to gain privileges and execute arbitrary code via the DBUS_SYSTEM_BUS_ADDRESS environment variable. NOTE: libdbus maintainers state that this is a vulnerability in the applications that do not cleanse environment variables, not in libdbus itself: "we do not support use of libdbus in setuid binaries that do not sanitize their environment before their first call into libdbus." |
| CVE-2012-2095 | The SetWiredProperty function in the D-Bus interface in WICD before 1.7.2 allows local users to write arbitrary configuration settings and gain privileges via a crafted property name in a dbus message. |
| CVE-2012-1615 | A Privilege Escalation vulnerability exits in Fedoraproject Sectool due to an incorrect DBus file. |
| CVE-2012-1257 | Pidgin 2.10.0 uses DBUS for certain cleartext communication, which allows local users to obtain sensitive information via a dbus session monitor. |
| CVE-2011-4129 | (1) services/twitter/twitter-contact-view.c and (2) services/twitter/twitter-item-view.c in libsocialweb before 0.25.20 automatically connect to Twitter when no Twitter account is set, which might allow remote attackers to obtain sensitive information via a man-in-the-middle (MITM) attack. |
| CVE-2011-2777 | samples/powerbtn/powerbtn.sh in acpid (aka acpid2) 2.0.16 and earlier uses the pidof program incorrectly, which allows local users to gain privileges by running a program with the name kded4 and a DBUS_SESSION_BUS_ADDRESS environment variable containing commands. |
| CVE-2011-2533 | The configure script in D-Bus (aka DBus) 1.2.x before 1.2.28 allows local users to overwrite arbitrary files via a symlink attack on an unspecified file in /tmp/. |
| CVE-2011-2200 | The _dbus_header_byteswap function in dbus-marshal-header.c in D-Bus (aka DBus) 1.2.x before 1.2.28, 1.4.x before 1.4.12, and 1.5.x before 1.5.4 does not properly handle a non-native byte order, which allows local users to cause a denial of service (connection loss), obtain potentially sensitive information, or conduct unspecified state-modification attacks via crafted messages. |
| CVE-2011-1842 | dbus_backend/lsd.py in the D-Bus backend in language-selector before 0.6.7 does not validate the arguments to the (1) SetSystemDefaultLangEnv and (2) SetSystemDefaultLanguageEnv functions, which allows local users to gain privileges via shell metacharacters in a string argument, a different vulnerability than CVE-2011-0729. |
| CVE-2011-1828 | usb-creator-helper in usb-creator before 0.2.28.3 does not enforce intended PolicyKit restrictions, which allows local users to perform arbitrary unmount operations via the UnmountFile method in a dbus-send command. |
| CVE-2011-0729 | dbus_backend/ls-dbus-backend in the D-Bus backend in language-selector before 0.6.7 does not restrict access on the basis of a PolicyKit check result, which allows local users to modify the /etc/default/locale and /etc/environment files via a (1) SetSystemDefaultLangEnv or (2) SetSystemDefaultLanguageEnv call. |
| CVE-2010-4352 | Stack consumption vulnerability in D-Bus (aka DBus) before 1.4.1 allows local users to cause a denial of service (daemon crash) via a message containing many nested variants. |
| CVE-2010-1172 | DBus-GLib 0.73 disregards the access flag of exported GObject properties, which allows local users to bypass intended access restrictions and possibly cause a denial of service by modifying properties, as demonstrated by properties of the (1) DeviceKit-Power, (2) NetworkManager, and (3) ModemManager services. |
| CVE-2009-4145 | nm-connection-editor in NetworkManager (NM) 0.7.x exports connection objects over D-Bus upon actions in the connection editor GUI, which allows local users to obtain sensitive information by reading D-Bus signals, as demonstrated by using dbus-monitor to discover the password for the WiFi network. |
| CVE-2009-1189 | The _dbus_validate_signature_with_reason function (dbus-marshal-validate.c) in D-Bus (aka DBus) before 1.2.14 uses incorrect logic to validate a basic type, which allows remote attackers to spoof a signature via a crafted key. NOTE: this is due to an incorrect fix for CVE-2008-3834. |
| CVE-2009-0578 | GNOME NetworkManager before 0.7.0.99 does not properly verify privileges for dbus (1) modify and (2) delete requests, which allows local users to change or remove the network connections of arbitrary users via unspecified vectors related to org.freedesktop.NetworkManagerUserSettings and at_console. |
| CVE-2009-0489 | The DBus configuration file for Wicd before 1.5.9 allows arbitrary users to own org.wicd.daemon, which allows local users to receive messages that were intended for the Wicd daemon, possibly including credentials. |
| CVE-2009-0365 | nm-applet.conf in GNOME NetworkManager before 0.7.0.99 contains an incorrect deny setting, which allows local users to discover (1) network connection passwords and (2) pre-shared keys via calls to the GetSecrets method in the dbus request handler. |
| CVE-2008-4311 | The default configuration of system.conf in D-Bus (aka DBus) before 1.2.6 omits the send_type attribute in certain rules, which allows local users to bypass intended access restrictions by (1) sending messages, related to send_requested_reply; and possibly (2) receiving messages, related to receive_requested_reply. |
| CVE-2008-3834 | The dbus_signature_validate function in the D-bus library (libdbus) before 1.2.4 allows remote attackers to cause a denial of service (application abort) via a message containing a malformed signature, which triggers a failed assertion error. |
| CVE-2008-0595 | dbus-daemon in D-Bus before 1.0.3, and 1.1.x before 1.1.20, recognizes send_interface attributes in allow directives in the security policy only for fully qualified method calls, which allows local users to bypass intended access restrictions via a method call with a NULL interface. |
| CVE-2006-6107 | Unspecified vulnerability in the match_rule_equal function in bus/signals.c in D-Bus before 1.0.2 allows local applications to remove match rules for other applications and cause a denial of service (lost process messages). |
| CVE-2005-0201 | D-BUS (dbus) before 0.22 does not properly restrict access to a socket, if the socket address is known, which allows local users to listen or send arbitrary messages on another user's per-user session bus via that socket. |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
