Search Results
There are 502 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2024-32480 | LibreNMS is an open-source, PHP/MySQL/SNMP-based network monitoring system. Versions prior to 24.4.0 are vulnerable to SQL injection. The `order` parameter is obtained from `$request`. After performing a string check, the value is directly incorporated into an SQL statement and concatenated, resulting in a SQL injection vulnerability. An attacker may extract a whole database this way. Version 24.4.0 fixes the issue. |
| CVE-2024-32479 | LibreNMS is an open-source, PHP/MySQL/SNMP-based network monitoring system. Prior to version 24.4.0, there is improper sanitization on the `Service` template name, which can lead to stored Cross-site Scripting. Version 24.4.0 fixes this vulnerability. |
| CVE-2024-32461 | LibreNMS is an open-source, PHP/MySQL/SNMP-based network monitoring system. A SQL injection vulnerability in POST /search/search=packages in LibreNMS prior to version 24.4.0 allows a user with global read privileges to execute SQL commands via the package parameter. With this vulnerability, an attacker can exploit a SQL injection time based vulnerability to extract all data from the database, such as administrator credentials. Version 24.4.0 contains a patch for the vulnerability. |
| CVE-2024-2371 | Information exposure vulnerability in Korenix JetI/O 6550 affecting firmware version F208 Build:0817. The SNMP protocol uses plaintext to transfer data, allowing an attacker to intercept traffic and retrieve credentials. |
| CVE-2024-21603 | An Improper Check for Unusual or Exceptional Conditions vulnerability in the kernel of Juniper Network Junos OS on MX Series allows a network based attacker with low privileges to cause a denial of service. If a scaled configuration for Source class usage (SCU) / destination class usage (DCU) (more than 10 route classes) is present and the SCU/DCU statistics are gathered by executing specific SNMP requests or CLI commands, a 'vmcore' for the RE kernel will be seen which leads to a device restart. Continued exploitation of this issue will lead to a sustained DoS. This issue only affects MX Series devices with MPC10, MPC11 or LC9600, and MX304. No other MX Series devices are affected. This issue affects Juniper Networks Junos OS: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S6; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3; * 22.1 versions earlier than 22.1R3; * 22.2 versions earlier than 22.2R2; * 22.3 versions earlier than 22.3R2. |
| CVE-2024-20319 | A vulnerability in the UDP forwarding code of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to bypass configured management plane protection policies and access the Simple Network Management Plane (SNMP) server of an affected device. This vulnerability is due to incorrect UDP forwarding programming when using SNMP with management plane protection. An attacker could exploit this vulnerability by attempting to perform an SNMP operation using broadcast as the destination address that could be processed by an affected device that is configured with an SNMP server. A successful exploit could allow the attacker to communicate to the device on the configured SNMP ports. Although an unauthenticated attacker could send UDP datagrams to the configured SNMP port, only an authenticated user can retrieve or modify data using SNMP requests. |
| CVE-2024-20294 | A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific fields in an LLDP frame. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface of an affected device and having an authenticated user retrieve LLDP statistics from the affected device through CLI show commands or Simple Network Management Protocol (SNMP) requests. A successful exploit could allow the attacker to cause the LLDP service to crash and stop running on the affected device. In certain situations, the LLDP crash may result in a reload of the affected device. Note: LLDP is a Layer 2 link protocol. To exploit this vulnerability, an attacker would need to be directly connected to an interface of an affected device, either physically or logically (for example, through a Layer 2 Tunnel configured to transport the LLDP protocol). |
| CVE-2024-1491 | The devices allow access to an unprotected endpoint that allows MPFS file system binary image upload without authentication. The MPFS2 file system module provides a light-weight read-only file system that can be stored in external EEPROM, external serial flash, or internal flash program memory. This file system serves as the basis for the HTTP2 web server module, but is also used by the SNMP module and is available to other applications that require basic read-only storage capabilities. This can be exploited to overwrite the flash program memory that holds the web server's main interfaces and execute arbitrary code. |
| CVE-2023-6791 | A credential disclosure vulnerability in Palo Alto Networks PAN-OS software enables an authenticated read-only administrator to obtain the plaintext credentials of stored external system integrations such as LDAP, SCP, RADIUS, TACACS+, and SNMP from the web interface. |
| CVE-2023-51448 | Cacti provides an operational monitoring and fault management framework. Version 1.2.25 has a Blind SQL Injection (SQLi) vulnerability within the SNMP Notification Receivers feature in the file `‘managers.php’`. An authenticated attacker with the “Settings/Utilities” permission can send a crafted HTTP GET request to the endpoint `‘/cacti/managers.php’` with an SQLi payload in the `‘selected_graphs_array’` HTTP GET parameter. As of time of publication, no patched versions exist. |
| CVE-2023-49563 | Cross Site Scripting (XSS) in Voltronic Power SNMP Web Pro v.1.1 allows an attacker to execute arbitrary code via a crafted script within a request to the webserver. |
| CVE-2023-48692 | Azure RTOS NetX Duo is a TCP/IP network stack designed specifically for deeply embedded real-time and IoT applications. An attacker can cause remote code execution due to memory overflow vulnerabilities in Azure RTOS NETX Duo. The affected components include processes/functions related to icmp, tcp, snmp, dhcp, nat and ftp in RTOS v6.2.1 and below. The fixes have been included in NetX Duo release 6.3.0. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-48316 | Azure RTOS NetX Duo is a TCP/IP network stack designed specifically for deeply embedded real-time and IoT applications. An attacker can cause remote code execution due to memory overflow vulnerabilities in Azure RTOS NETX Duo. The affected components include processes/functions related to snmp, smtp, ftp and dtls in RTOS v6.2.1 and below. The fixes have been included in NetX Duo release 6.3.0. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-48295 | LibreNMS is an auto-discovering PHP/MySQL/SNMP based network monitoring which includes support for a wide range of network hardware and operating systems. Affected versions are subject to a cross site scripting (XSS) vulnerability in the device group popups. This issue has been addressed in commit `faf66035ea` which has been included in release version 23.11.0. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-48294 | LibreNMS is an auto-discovering PHP/MySQL/SNMP based network monitoring which includes support for a wide range of network hardware and operating systems. In affected versions of LibreNMS when a user accesses their device dashboard, one request is sent to `graph.php` to access graphs generated on the particular Device. This request can be accessed by a low privilege user and they can enumerate devices on librenms with their id or hostname. Leveraging this vulnerability a low privilege user can see all devices registered by admin users. This vulnerability has been addressed in commit `489978a923` which has been included in release version 23.11.0. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-46745 | LibreNMS is an auto-discovering PHP/MySQL/SNMP based network monitoring which includes support for a wide range of network hardware and operating systems. In affected versions the login method has no rate limit. An attacker may be able to leverage this vulnerability to gain access to user accounts. This issue has been addressed in version 23.11.0. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-44315 | A vulnerability has been identified in SINEC NMS (All versions < V2.0). The affected application improperly sanitizes certain SNMP configuration data retrieved from monitored devices. An attacker with access to a monitored device could prepare a stored cross-site scripting (XSS) attack that may lead to unintentional modification of application data by legitimate users. |
| CVE-2023-42765 | An attacker with access to the vulnerable software could introduce arbitrary JavaScript by injecting a cross-site scripting payload into the "username" parameter in the SNMP configuration. |
| CVE-2023-41792 | Cross-Site Request Forgery (CSRF) vulnerability in Pandora FMS on all allows Cross-Site Scripting (XSS). This vulnerability allowed Javascript code to be executed in the SNMP Trap Editor. This issue affects Pandora FMS: from 700 through 773. |
| CVE-2023-39362 | Cacti is an open source operational monitoring and fault management framework. In Cacti 1.2.24, under certain conditions, an authenticated privileged user, can use a malicious string in the SNMP options of a Device, performing command injection and obtaining remote code execution on the underlying server. The `lib/snmp.php` file has a set of functions, with similar behavior, that accept in input some variables and place them into an `exec` call without a proper escape or validation. This issue has been addressed in version 1.2.25. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-39073 | An issue in SNMP Web Pro v.1.1 allows a remote attacker to execute arbitrary code and obtain senstive information via a crafted request. |
| CVE-2023-37864 | In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with SNMPv2 write privileges may use an a special SNMP request to gain full access to the device. |
| CVE-2023-37863 | In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with SNMPv2 write privileges may use an a special SNMP request to gain full access to the device. |
| CVE-2023-37859 | In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 the SNMP daemon is running with root privileges allowing a remote attacker with knowledge of the SNMPv2 r/w community string to execute system commands as root. |
| CVE-2023-35796 | A vulnerability has been identified in SINEMA Server V14 (All versions). The affected application improperly sanitizes certain SNMP configuration data retrieved from monitored devices. An attacker with access to a monitored device could perform a stored cross-site scripting (XSS) attack that may lead to arbitrary code execution with `SYSTEM` privileges on the application server. (ZDI-CAN-19823) |
| CVE-2023-35759 | In Progress WhatsUp Gold before 23.0.0, an SNMP-related application endpoint failed to adequately sanitize malicious input. This could allow an unauthenticated attacker to execute arbitrary code in a victim's browser, aka XSS. |
| CVE-2023-35085 | An integer overflow vulnerability in all UniFi Access Points and Switches, excluding the Switch Flex Mini, with SNMP Monitoring and default settings enabled could allow a Remote Code Execution (RCE). Affected Products: All UniFi Access Points (Version 6.5.50 and earlier) All UniFi Switches (Version 6.5.32 and earlier) -USW Flex Mini excluded. Mitigation: Update UniFi Access Points to Version 6.5.62 or later. Update the UniFi Switches to Version 6.5.59 or later. |
| CVE-2023-34257 | ** DISPUTED ** An issue was discovered in BMC Patrol through 23.1.00. The agent's configuration can be remotely modified (and, by default, authentication is not required). Some configuration fields related to SNMP (e.g., masterAgentName or masterAgentStartLine) result in code execution when the agent is restarted. NOTE: the vendor's perspective is "These are not vulnerabilities for us as we have provided the option to implement the authentication." |
| CVE-2023-33274 | The authentication mechanism in PowerShield SNMP Web Pro 1.1 contains a vulnerability that allows unauthenticated users to directly access Common Gateway Interface (CGI) scripts without proper identification or authorization. This vulnerability arises from a lack of proper cookie verification and affects all instances of SNMP Web Pro 1.1 without HTTP Digest authentication enabled, regardless of the password used for the web interface. |
| CVE-2023-31925 | Brocade SANnav before v2.3.0 and v2.2.2a stores SNMPv3 Authentication passwords in plaintext. A privileged user could retrieve these credentials with knowledge and access to these log files. SNMP credentials could be seen in SANnav SupportSave if the capture is performed after an SNMP configuration failure causes an SNMP communication log dump. |
| CVE-2023-26602 | ASUS ASMB8 iKVM firmware through 1.14.51 allows remote attackers to execute arbitrary code by using SNMP to create extensions, as demonstrated by snmpset for NET-SNMP-EXTEND-MIB with /bin/sh for command execution. |
| CVE-2023-25413 | Aten PE8108 2.4.232 is vulnerable to Incorrect Access Control. The device allows unauthenticated access to Telnet and SNMP credentials. |
| CVE-2023-24511 | On affected platforms running Arista EOS with SNMP configured, a specially crafted packet can cause a memory leak in the snmpd process. This may result in the snmpd processing being terminated (causing SNMP requests to time out until snmpd is automatically restarted) and potential memory resource exhaustion for other processes on the switch. The vulnerability does not have any confidentiality or integrity impacts to the system. |
| CVE-2023-22577 | Within White Rabbit Switch it's possible as an unauthenticated user to retrieve sensitive information such as password hashes and the SNMP community strings. |
| CVE-2023-22401 | An Improper Validation of Array Index vulnerability in the Advanced Forwarding Toolkit Manager daemon (aftmand) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). On the PTX10008 and PTX10016 platforms running Junos OS or Junos OS Evolved, when a specific SNMP MIB is queried this will cause a PFE crash and the FPC will go offline and not automatically recover. A system restart is required to get the affected FPC in an operational state again. This issue affects: Juniper Networks Junos OS 22.1 version 22.1R2 and later versions; 22.1 versions prior to 22.1R3; 22.2 versions prior to 22.2R2. Juniper Networks Junos OS Evolved 21.3-EVO version 21.3R3-EVO and later versions; 21.4-EVO version 21.4R1-S2-EVO, 21.4R2-EVO and later versions prior to 21.4R2-S1-EVO; 22.1-EVO version 22.1R2-EVO and later versions prior to 22.1R3-EVO; 22.2-EVO versions prior to 22.2R1-S1-EVO, 22.2R2-EVO. |
| CVE-2023-22400 | An Uncontrolled Resource Consumption vulnerability in the PFE management daemon (evo-pfemand) of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause an FPC crash leading to a Denial of Service (DoS). When a specific SNMP GET operation or a specific CLI command is executed this will cause a GUID resource leak, eventually leading to exhaustion and result in an FPC crash and reboot. GUID exhaustion will trigger a syslog message like one of the following for example: evo-pfemand[<pid>]: get_next_guid: Ran out of Guid Space ... evo-aftmand-zx[<pid>]: get_next_guid: Ran out of Guid Space ... This leak can be monitored by running the following command and taking note of the value in the rightmost column labeled Guids: user@host> show platform application-info allocations app evo-pfemand | match "IFDId|IFLId|Context" Node Application Context Name Live Allocs Fails Guids re0 evo-pfemand net::juniper::interfaces::IFDId 0 3448 0 3448 re0 evo-pfemand net::juniper::interfaces::IFLId 0 561 0 561 user@host> show platform application-info allocations app evo-pfemand | match "IFDId|IFLId|Context" Node Application Context Name Live Allocs Fails Guids re0 evo-pfemand net::juniper::interfaces::IFDId 0 3784 0 3784 re0 evo-pfemand net::juniper::interfaces::IFLId 0 647 0 647 This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S3-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO versions prior to 21.2R3-S4-EVO; 21.3-EVO version 21.3R1-EVO and later versions; 21.4-EVO versions prior to 21.4R2-EVO. |
| CVE-2023-20200 | A vulnerability in the Simple Network Management Protocol (SNMP) service of Cisco FXOS Software for Firepower 4100 Series and Firepower 9300 Security Appliances and of Cisco UCS 6300 Series Fabric Interconnects could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to the improper handling of specific SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects all supported SNMP versions. To exploit this vulnerability through SNMPv2c or earlier, an attacker must know the SNMP community string that is configured on an affected device. To exploit this vulnerability through SNMPv3, the attacker must have valid credentials for an SNMP user who is configured on the affected device. |
| CVE-2023-20016 | A vulnerability in the backup configuration feature of Cisco UCS Manager Software and in the configuration export feature of Cisco FXOS Software could allow an unauthenticated attacker with access to a backup file to decrypt sensitive information stored in the full state and configuration backup files. This vulnerability is due to a weakness in the encryption method used for the backup function. An attacker could exploit this vulnerability by leveraging a static key used for the backup configuration feature. A successful exploit could allow the attacker to decrypt sensitive information that is stored in full state and configuration backup files, such as local user credentials, authentication server passwords, Simple Network Management Protocol (SNMP) community names, and other credentials. |
| CVE-2023-20009 | A vulnerability in the Web UI and administrative CLI of the Cisco Secure Email Gateway (ESA) and Cisco Secure Email and Web Manager (SMA) could allow an authenticated remote attacker and or authenticated local attacker to escalate their privilege level and gain root access. The attacker has to have a valid user credential with at least a [[privilege of operator - validate actual name]]. The vulnerability is due to the processing of a specially crafted SNMP configuration file. An attacker could exploit this vulnerability by authenticating to the targeted device and uploading a specially crafted SNMP configuration file that when uploaded could allow for the execution of commands as root. An exploit could allow the attacker to gain root access on the device. |
| CVE-2022-46738 | The affected product exposes multiple sensitive data fields of the affected product. An attacker can use the SNMP command to get device mac address and login as admin. |
| CVE-2022-46670 | Rockwell Automation was made aware of a vulnerability by a security researcher from Georgia Institute of Technology that the MicroLogix 1100 and 1400 controllers contain a vulnerability that may give an attacker the ability to accomplish remote code execution. The vulnerability is an unauthenticated stored cross-site scripting vulnerability in the embedded webserver. The payload is transferred to the controller over SNMP and is rendered on the homepage of the embedded website. |
| CVE-2022-45315 | Mikrotik RouterOs before stable v7.6 was discovered to contain an out-of-bounds read in the snmp process. This vulnerability allows attackers to execute arbitrary code via a crafted packet. |
| CVE-2022-44793 | handle_ipv6IpForwarding in agent/mibgroup/ip-mib/ip_scalars.c in Net-SNMP 5.4.3 through 5.9.3 has a NULL Pointer Exception bug that can be used by a remote attacker to cause the instance to crash via a crafted UDP packet, resulting in Denial of Service. |
| CVE-2022-44792 | handle_ipDefaultTTL in agent/mibgroup/ip-mib/ip_scalars.c in Net-SNMP 5.8 through 5.9.3 has a NULL Pointer Exception bug that can be used by a remote attacker (who has write access) to cause the instance to crash via a crafted UDP packet, resulting in Denial of Service. |
| CVE-2022-42711 | In Progress WhatsUp Gold before 22.1.0, an SNMP MIB Walker application endpoint failed to adequately sanitize malicious input. This could allow an unauthenticated attacker to execute arbitrary code in a victim's browser. |
| CVE-2022-38066 | An OS command injection vulnerability exists in the httpd SNMP functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted HTTP response can lead to arbitrary command execution. An attacker can send a network request to trigger this vulnerability. |
| CVE-2022-36311 | Airspan AirVelocity 1500 prior to software version 15.18.00.2511 is vulnerable to injection leading to XSS in the SNMP community field in the eNodeB's web management UI. This issue may affect other AirVelocity and AirSpeed models. |
| CVE-2022-36310 | Airspan AirVelocity 1500 software prior to version 15.18.00.2511 had NET-SNMP-EXTEND-MIB enabled on its snmpd service, enabling an attacker with SNMP write abilities to execute commands as root on the eNodeB. This issue may affect other AirVelocity and AirSpeed models. |
| CVE-2022-36308 | Airspan AirVelocity 1500 web management UI displays SNMP credentials in plaintext on software versions older than 15.18.00.2511, and stores SNMPv3 credentials unhashed on the filesystem, enabling anyone with web access to use these credentials to manipulate the eNodeB over SNMP. This issue may affect other AirVelocity and AirSpeed models. |
| CVE-2022-36307 | The AirVelocity 1500 prints SNMP credentials on its physically accessible serial port during boot. This was fixed in AirVelocity 1500 software version 15.18.00.2511 and may affect other AirVelocity and AirSpeed models. |
| CVE-2022-26380 | A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. Affected devices do not properly validate if a certain SNMP key exists. An attacker could use this to trigger a reboot of an affected device by requesting specific SNMP information from the device. |
| CVE-2022-24810 | net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a user with read-write credentials can use a malformed OID in a SET to the nsVacmAccessTable to cause a NULL pointer dereference. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range. |
| CVE-2022-24809 | net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a user with read-only credentials can use a malformed OID in a `GET-NEXT` to the `nsVacmAccessTable` to cause a NULL pointer dereference. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range. |
| CVE-2022-24808 | net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a user with read-write credentials can use a malformed OID in a `SET` request to `NET-SNMP-AGENT-MIB::nsLogTable` to cause a NULL pointer dereference. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range. |
| CVE-2022-24807 | net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a malformed OID in a SET request to `SNMP-VIEW-BASED-ACM-MIB::vacmAccessTable` can cause an out-of-bounds memory access. A user with read-write credentials can exploit the issue. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range. |
| CVE-2022-24806 | net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a user with read-write credentials can exploit an Improper Input Validation vulnerability when SETing malformed OIDs in master agent and subagent simultaneously. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range. |
| CVE-2022-24805 | net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a buffer overflow in the handling of the `INDEX` of `NET-SNMP-VACM-MIB` can cause an out-of-bounds memory access. A user with read-only credentials can exploit the issue. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range. |
| CVE-2022-22510 | Codesys Profinet in version V4.2.0.0 is prone to null pointer dereference that allows a denial of service (DoS) attack of an unauthenticated user via SNMP. |
| CVE-2022-22277 | A vulnerability in SonicOS SNMP service resulting exposure of Wireless Access Point sensitive information in cleartext. |
| CVE-2022-22276 | A vulnerability in SonicOS SNMP service resulting exposure of sensitive information to an unauthorized user. |
| CVE-2022-22211 | A limitless resource allocation vulnerability in FPC resources of Juniper Networks Junos OS Evolved on PTX Series allows an unprivileged attacker to cause Denial of Service (DoS). Continuously polling the SNMP jnxCosQstatTable causes the FPC to run out of GUID space, causing a Denial of Service to the FPC resources. When the FPC runs out of the GUID space, you will see the following syslog messages. The evo-aftmand-bt process is asserting. fpc1 evo-aftmand-bt[17556]: %USER-3: get_next_guid: Ran out of Guid Space start 1748051689472 end 1752346656767 fpc1 audit[17556]: %AUTH-5: ANOM_ABEND auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 kernel: %KERN-5: audit: type=1701 audit(1648567505.119:57): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 emfd-fpa[14438]: %USER-5: Alarm set: APP color=red, class=CHASSIS, reason=Application evo-aftmand-bt fail on node Fpc1 fpc1 emfd-fpa[14438]: %USER-3-EMF_FPA_ALARM_REP: RaiseAlarm: Alarm(Location: /Chassis[0]/Fpc[1] Module: sysman Object: evo-aftmand-bt:0 Error: 2) reported fpc1 sysepochman[12738]: %USER-5-SYSTEM_REBOOT_EVENT: Reboot [node] [ungraceful reboot] [evo-aftmand-bt exited] The FPC resources can be monitored using the following commands: user@router> start shell [vrf:none] user@router-re0:~$ cli -c "show platform application-info allocations app evo-aftmand-bt" | grep ^fpc | grep -v Route | grep -i -v Nexthop | awk '{total[$1] += $5} END { for (key in total) { print key " " total[key]/4294967296 }}' Once the FPCs become unreachable they must be manually restarted as they do not self-recover. This issue affects Juniper Networks Junos OS Evolved on PTX Series: All versions prior to 20.4R3-S4-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO version 21.2R1-EVO and later versions; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R2-EVO; 22.1-EVO versions prior to 22.1R2-EVO. |
| CVE-2022-22177 | A release of illegal memory vulnerability in the snmpd daemon of Juniper Networks Junos OS, Junos OS Evolved allows an attacker to halt the snmpd daemon causing a sustained Denial of Service (DoS) to the service until it is manually restarted. This issue impacts any version of SNMP – v1,v2, v3 This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S20; 15.1 versions prior to 15.1R7-S11; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S10; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R2-S5, 19.4R3-S6; 20.1 versions prior to 20.1R3-S2; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2-S2, 21.1R3; 21.2 versions prior to 21.2R1-S2, 21.2R2. Juniper Networks Junos OS Evolved 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-EVO. |
| CVE-2022-22156 | An Improper Certificate Validation weakness in the Juniper Networks Junos OS allows an attacker to perform Person-in-the-Middle (PitM) attacks when a system script is fetched from a remote source at a specified HTTPS URL, which may compromise the integrity and confidentiality of the device. The following command can be executed by an administrator via the CLI to refresh a script from a remote location, which is affected from this vulnerability: >request system scripts refresh-from (commit | event | extension-service | op | snmp) file filename url <https-url> This issue affects: Juniper Networks Junos OS All versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R3-S7; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R3; 20.3 versions prior to 20.3R2-S1, 20.3R3; 20.4 versions prior to 20.4R2; 21.1 versions prior to 21.1R1-S1, 21.1R2. |
| CVE-2022-20924 | A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| CVE-2022-20918 | A vulnerability in the Simple Network Management Protocol (SNMP) access controls for Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module, Cisco Firepower Management Center (FMC) Software, and Cisco Next-Generation Intrusion Prevention System (NGIPS) Software could allow an unauthenticated, remote attacker to perform an SNMP GET request using a default credential. This vulnerability is due to the presence of a default credential for SNMP version 1 (SNMPv1) and SNMP version 2 (SNMPv2). An attacker could exploit this vulnerability by sending an SNMPv1 or SNMPv2 GET request to an affected device. A successful exploit could allow the attacker to retrieve sensitive information from the device using the default credential. This attack will only be successful if SNMP is configured, and the attacker can only perform SNMP GET requests; write access using SNMP is not allowed. |
| CVE-2022-20810 | A vulnerability in the Simple Network Management Protocol (SNMP) of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an authenticated, remote attacker to access sensitive information. This vulnerability is due to insufficient restrictions that allow a sensitive configuration detail to be disclosed. An attacker could exploit this vulnerability by retrieving data through SNMP read-only community access. A successful exploit could allow the attacker to view Service Set Identifier (SSID) preshared keys (PSKs) that are configured on the affected device. |
| CVE-2022-20684 | A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition on the device. This vulnerability is due to a lack of input validation of the information used to generate an SNMP trap related to a wireless client connection event. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| CVE-2022-20675 | A vulnerability in the TCP/IP stack of Cisco Email Security Appliance (ESA), Cisco Web Security Appliance (WSA), and Cisco Secure Email and Web Manager, formerly Security Management Appliance, could allow an unauthenticated, remote attacker to crash the Simple Network Management Protocol (SNMP) service, resulting in a denial of service (DoS) condition. This vulnerability is due to an open port listener on TCP port 199. An attacker could exploit this vulnerability by connecting to TCP port 199. A successful exploit could allow the attacker to crash the SNMP service, resulting in a DoS condition. |
| CVE-2022-0222 | A CWE-269: Improper Privilege Management vulnerability exists that could cause a denial of service of the Ethernet communication of the controller when sending a specific request over SNMP. Affected products: Modicon M340 CPUs(BMXP34* versions prior to V3.40), Modicon M340 X80 Ethernet Communication modules:BMXNOE0100 (H), BMXNOE0110 (H), BMXNOR0200H RTU(BMXNOE* all versions)(BMXNOR* versions prior to v1.7 IR24) |
| CVE-2021-43044 | An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. The SNMP daemon was configured with a weak default community. |
| CVE-2021-42372 | A shell command injection in the HW Events SNMP community in XoruX LPAR2RRD and STOR2RRD before 7.30 allows authenticated remote attackers to execute arbitrary shell commands as the user running the service. |
| CVE-2021-41315 | The Device42 Remote Collector before 17.05.01 does not sanitize user input in its SNMP Connectivity utility. This allows an authenticated attacker (with access to the console application) to execute arbitrary OS commands and escalate privileges. |
| CVE-2021-38412 | Properly formatted POST requests to multiple resources on the HTTP and HTTPS web servers of the Digi PortServer TS 16 Rack device do not require authentication or authentication tokens. This vulnerability could allow an attacker to enable the SNMP service and manipulate the community strings to achieve further control in. |
| CVE-2021-36319 | Dell Networking OS10 versions 10.4.3.x, 10.5.0.x and 10.5.1.x contain an information exposure vulnerability. A low privileged authenticated malicious user can gain access to SNMP authentication failure messages. |
| CVE-2021-34794 | A vulnerability in the Simple Network Management Protocol version 3 (SNMPv3) access control functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to query SNMP data. This vulnerability is due to ineffective access control. An attacker could exploit this vulnerability by sending an SNMPv3 query to an affected device from a host that is not permitted by the SNMPv3 access control list. A successful exploit could allow the attacker to send an SNMP query to an affected device and retrieve information from the device. The attacker would need valid credentials to perform the SNMP query. |
| CVE-2021-34703 | A vulnerability in the Link Layer Discovery Protocol (LLDP) message parser of Cisco IOS Software and Cisco IOS XE Software could allow an attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper initialization of a buffer. An attacker could exploit this vulnerability via any of the following methods: An authenticated, remote attacker could access the LLDP neighbor table via either the CLI or SNMP while the device is in a specific state. An unauthenticated, adjacent attacker could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then waiting for an administrator of the device or a network management system (NMS) managing the device to retrieve the LLDP neighbor table of the device via either the CLI or SNMP. An authenticated, adjacent attacker with SNMP read-only credentials or low privileges on the device CLI could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then accessing the LLDP neighbor table via either the CLI or SNMP. A successful exploit could allow the attacker to cause the affected device to crash, resulting in a reload of the device. |
| CVE-2021-33539 | In Weidmueller Industrial WLAN devices in multiple versions an exploitable authentication bypass vulnerability exists in the hostname processing. A specially configured device hostname can cause the device to interpret selected remote traffic as local traffic, resulting in a bypass of web authentication. An attacker can send authenticated SNMP requests to trigger this vulnerability. |
| CVE-2021-3130 | Within the Open-AudIT up to version 3.5.3 application, the web interface hides SSH secrets, Windows passwords, and SNMP strings from users using HTML 'password field' obfuscation. By using Developer tools or similar, it is possible to change the obfuscation so that the credentials are visible. |
| CVE-2021-28665 | Stormshield SNS with versions before 3.7.18, 3.11.6 and 4.1.6 has a memory-management defect in the SNMP plugin that can lead to excessive consumption of memory and CPU resources, and possibly a denial of service. |
| CVE-2021-23281 | Eaton Intelligent Power Manager (IPM) prior to 1.69 is vulnerable to unauthenticated remote code execution vulnerability. IPM software does not sanitize the date provided via coverterCheckList action in meta_driver_srv.js class. Attackers can send a specially crafted packet to make IPM connect to rouge SNMP server and execute attacker-controlled code. |
| CVE-2021-21003 | In Phoenix Contact FL SWITCH SMCS series products in multiple versions fragmented TCP-Packets may cause a Denial of Service of Web-, SNMP- and ICMP-Echo services. The switching functionality of the device is not affected. |
| CVE-2021-1623 | A vulnerability in the Simple Network Management Protocol (SNMP) punt handling function of Cisco cBR-8 Converged Broadband Routers could allow an authenticated, remote attacker to overload a device punt path, resulting in a denial of service (DoS) condition. This vulnerability is due to the punt path being overwhelmed by large quantities of SNMP requests. An attacker could exploit this vulnerability by sending a large number of SNMP requests to an affected device. A successful exploit could allow the attacker to overload the device punt path, resulting in a DoS condition. |
| CVE-2021-1243 | A vulnerability in the Local Packet Transport Services (LPTS) programming of the SNMP with the management plane protection feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to allow connections despite the management plane protection that is configured to deny access to the SNMP server of an affected device. This vulnerability is due to incorrect LPTS programming when using SNMP with management plane protection. An attacker could exploit this vulnerability by connecting to an affected device using SNMP. A successful exploit could allow the attacker to connect to the device on the configured SNMP ports. Valid credentials are required to execute any of the SNMP requests. |
| CVE-2021-0291 | An Exposure of System Data vulnerability in Juniper Networks Junos OS and Junos OS Evolved, where a sensitive system-level resource is not being sufficiently protected, allows a network-based unauthenticated attacker to send specific traffic which partially reaches this resource. A high rate of specific traffic may lead to a partial Denial of Service (DoS) as the CPU utilization of the RE is significantly increased. The SNMP Agent Extensibility (agentx) process should only be listening to TCP port 705 on the internal routing instance. External connections destined to port 705 should not be allowed. This issue affects: Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R2-S13, 17.4R3-S5; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R2-S8; 19.1 versions prior to 19.1R3-S5; 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R2. Juniper Networks Junos OS Evolved versions prior to 20.3R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 13.2R1. |
| CVE-2021-0260 | An improper authorization vulnerability in the Simple Network Management Protocol daemon (snmpd) service of Juniper Networks Junos OS leads an unauthenticated attacker being able to perform SNMP read actions, an Exposure of System Data to an Unauthorized Control Sphere, or write actions to OIDs that support write operations, against the device without authentication. This issue affects: Juniper Networks Junos OS: 17.2 version 17.2R1 and later versions; 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R2-S5, 18.4R3; 19.1 versions prior to 19.1R2; 19.2 versions prior to 19.2R1-S6, 19.2R2; 19.3 versions prior to 19.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 17.2R1. |
| CVE-2021-0230 | On Juniper Networks SRX Series devices with link aggregation (lag) configured, executing any operation that fetches Aggregated Ethernet (AE) interface statistics, including but not limited to SNMP GET requests, causes a slow kernel memory leak. If all the available memory is consumed, the traffic will be impacted and a reboot might be required. The following log can be seen if this issue happens. /kernel: rt_pfe_veto: Memory over consumed. Op 1 err 12, rtsm_id 0:-1, msg type 72 /kernel: rt_pfe_veto: free kmem_map memory = (20770816) curproc = kmd An administrator can use the following CLI command to monitor the status of memory consumption (ifstat bucket): user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 2588977 162708K - 19633958 <<<< user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 3021629 189749K - 22914415 <<<< This issue affects Juniper Networks Junos OS on SRX Series: 17.1 versions 17.1R3 and above prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S5; 18.2 versions prior to 18.2R3-S7, 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2. This issue does not affect Juniper Networks Junos OS prior to 17.1R3. |
| CVE-2020-9318 | Red Gate SQL Monitor 9.0.13 through 9.2.14 allows an administrative user to perform a SQL injection attack by configuring the SNMP alert settings in the UI. This is fixed in 9.2.15. |
| CVE-2020-8232 | An information disclosure vulnerability exists in EdgeMax EdgeSwitch firmware v1.9.0 that allowed read only users could obtain unauthorized information through SNMP community pages. |
| CVE-2020-7802 | The Synergy Systems & Solutions (SSS) HUSKY RTU 6049-E70, with firmware Versions 5.0 and prior, has an Incorrect Default Permissions (CWE-276) vulnerability. The affected product is vulnerable to insufficient default permissions, which could allow an attacker to view network configurations through SNMP communication. This is a different issue than CVE-2019-16879, CVE-2019-20045, CVE-2019-20046, CVE-2020-7800, and CVE-2020-7801. |
| CVE-2020-7801 | The Synergy Systems & Solutions (SSS) HUSKY RTU 6049-E70, with firmware Versions 5.0 and prior, has an Exposure of Sensitive Information to an Unauthorized Actor (CWE-200) vulnerability. The affected product is vulnerable to information exposure over the SNMP protocol. This is a different issue than CVE-2019-16879, CVE-2019-20045, CVE-2019-20046, CVE-2020-7800, and CVE-2020-7802. |
| CVE-2020-7536 | A CWE-754:Improper Check for Unusual or Exceptional Conditions vulnerability exists in Modicon M340 CPUs (BMXP34* versions prior to V3.30) Modicon M340 Communication Ethernet modules (BMXNOE0100 (H) versions prior to V3.4 BMXNOE0110 (H) versions prior to V6.6 BMXNOR0200H all versions), that could cause the device to be unreachable when modifying network parameters over SNMP. |
| CVE-2020-6060 | A stack buffer overflow vulnerability exists in the way MiniSNMPD version 1.4 handles multiple connections. A specially timed sequence of SNMP connections can trigger a stack overflow, resulting in a denial of service. To trigger this vulnerability, an attacker needs to simply initiate multiple connections to the server. |
| CVE-2020-6059 | An exploitable out of bounds read vulnerability exists in the way MiniSNMPD version 1.4 parses incoming SNMP packets. A specially crafted SNMP request can trigger an out of bounds memory read which can result in sensitive information disclosure and Denial Of Service. In order to trigger this vulnerability, an attacker needs to send a specially crafted packet to the vulnerable server. |
| CVE-2020-6058 | An exploitable out-of-bounds read vulnerability exists in the way MiniSNMPD version 1.4 parses incoming SNMP packets. A specially crafted SNMP request can trigger an out-of-bounds memory read, which can result in the disclosure of sensitive information and denial of service. To trigger this vulnerability, an attacker needs to send a specially crafted packet to the vulnerable server. |
| CVE-2020-4869 | IBM MQ Appliance 9.2 CD and 9.2 LTS is vulnerable to a denial of service, caused by a buffer overflow. A remote attacker could send a specially crafted SNMP query to cause the appliance to reload. IBM X-Force ID: 190831. |
| CVE-2020-3932 | A vulnerable SNMP in Draytek VigorAP910C cannot be disabled, which may cause information leakage. |
| CVE-2020-3533 | A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to restart unexpectedly. The vulnerability is due to a lack of sufficient memory management protections under heavy SNMP polling loads. An attacker could exploit this vulnerability by sending a high rate of SNMP requests to the SNMP daemon through the management interface on an affected device. A successful exploit could allow the attacker to cause the SNMP daemon process to consume a large amount of system memory over time, which could then lead to an unexpected device restart, causing a denial of service (DoS) condition. This vulnerability affects all versions of SNMP. |
| CVE-2020-3390 | A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of the Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation of the information used to generate an SNMP trap in relation to a wireless client connection. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, causing a DoS condition. |
| CVE-2020-3235 | A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software on Catalyst 4500 Series Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient input validation when the software processes specific SNMP object identifiers. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: To exploit this vulnerability by using SNMPv2c or earlier, the attacker must know the SNMP read-only community string for an affected system. To exploit this vulnerability by using SNMPv3, the attacker must know the user credentials for the affected system. |
| CVE-2020-3232 | A vulnerability in the Simple Network Management Protocol (SNMP) implementation in Cisco ASR 920 Series Aggregation Services Router model ASR920-12SZ-IM could allow an authenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect handling of data that is returned for Cisco Discovery Protocol queries to SNMP. An attacker could exploit this vulnerability by sending a request for Cisco Discovery Protocol information by using SNMP. An exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. |
| CVE-2020-29055 | An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. By default, the appliance can be managed remotely only with HTTP, telnet, and SNMP. It doesn't support SSL/TLS for HTTP or SSH. An attacker can intercept passwords sent in cleartext and conduct man-in-the-middle attacks on the management of the appliance. |
| CVE-2020-27725 | In version 15.1.0-15.1.0.5, 14.1.0-14.1.3, 13.1.0-13.1.3.4, 12.1.0-12.1.5.2, and 11.6.1-11.6.5.2 of BIG-IP DNS, GTM, and Link Controller, zxfrd leaks memory when listing DNS zones. Zones can be listed via TMSH, iControl or SNMP; only users with access to those services can trigger this vulnerability. |
| CVE-2020-27691 | The Relish (Verve Connect) VH510 device with firmware before 1.0.1.6L0516 allows XSS via URLBlocking Settings, SNMP Settings, and System Log Settings. |
| CVE-2020-1683 | On Juniper Networks Junos OS devices, a specific SNMP OID poll causes a memory leak which over time leads to a kernel crash (vmcore). Prior to the kernel crash other processes might be impacted, such as failure to establish SSH connection to the device. The administrator can monitor the output of the following command to check if there is memory leak caused by this issue: user@device> show system virtual-memory | match "pfe_ipc|kmem" pfe_ipc 147 5K - 164352 16,32,64,8192 <-- increasing vm.kmem_map_free: 127246336 <-- decreasing pfe_ipc 0 0K - 18598 32,8192 vm.kmem_map_free: 134582272 This issue affects Juniper Networks Junos OS: 17.4R3; 18.1 version 18.1R3-S5 and later versions prior to 18.1R3-S10; 18.2 version 18.2R3 and later versions prior to 18.2R3-S3; 18.2X75 version 18.2X75-D420, 18.2X75-D50 and later versions prior to 18.2X75-D430, 18.2X75-D53, 18.2X75-D60; 18.3 version 18.3R3 and later versions prior to 18.3R3-S2; 18.4 version 18.4R1-S4, 18.4R2 and later versions prior to 18.4R2-S5, 18.4R3-S1; 19.1 version 19.1R2 and later versions prior to 19.1R2-S2, 19.1R3; 19.2 version 19.2R1 and later versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2. This issue does not affect Juniper Networks Junos OS prior to 17.4R3. |
| CVE-2020-1600 | In a Point-to-Multipoint (P2MP) Label Switched Path (LSP) scenario, an uncontrolled resource consumption vulnerability in the Routing Protocol Daemon (RPD) in Juniper Networks Junos OS allows a specific SNMP request to trigger an infinite loop causing a high CPU usage Denial of Service (DoS) condition. This issue affects both SNMP over IPv4 and IPv6. This issue affects: Juniper Networks Junos OS: 12.3X48 versions prior to 12.3X48-D90; 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D200; 15.1X53 versions prior to 15.1X53-D238, 15.1X53-D592; 16.1 versions prior to 16.1R7-S5; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R3-S1; 17.2 versions prior to 17.2R3-S2; 17.3 versions prior to 17.3R3-S7; 17.4 versions prior to 17.4R2-S4, 17.4R3; 18.1 versions prior to 18.1R3-S5; 18.2 versions prior to 18.2R3; 18.2X75 versions prior to 18.2X75-D50; 18.3 versions prior to 18.3R2; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R2. |
| CVE-2020-15862 | Net-SNMP through 5.8 has Improper Privilege Management because SNMP WRITE access to the EXTEND MIB provides the ability to run arbitrary commands as root. |
| CVE-2020-15861 | Net-SNMP through 5.7.3 allows Escalation of Privileges because of UNIX symbolic link (symlink) following. |
| CVE-2020-14947 | OCS Inventory NG 2.7 allows Remote Command Execution via shell metacharacters to require/commandLine/CommandLine.php because mib_file in plugins/main_sections/ms_config/ms_snmp_config.php is mishandled in get_mib_oid. |
| CVE-2020-14937 | Memory access out of buffer boundaries issues was discovered in Contiki-NG 4.4 through 4.5, in the SNMP BER encoder/decoder. The length of provided input/output buffers is insufficiently verified during the encoding and decoding of data. This may lead to out-of-bounds buffer read or write access in BER decoding and encoding functions. |
| CVE-2020-14936 | Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP agent. Functions parsing the OIDs in SNMP requests lack sufficient allocated target-buffer capacity verification when writing parsed OID values. The function snmp_oid_decode_oid() may overwrite memory areas beyond the provided target buffer, when called from snmp_message_decode() upon an SNMP request reception. Because the content of the write operations is externally provided in the SNMP requests, it enables a remote overwrite of an IoT device's memory regions beyond the allocated buffer. This overflow may allow remote overwrite of stack and statically allocated variables memory regions by sending a crafted SNMP request. |
| CVE-2020-14935 | Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP bulk get request response encoding function. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. When a bulk get request response is assembled, a stack buffer dedicated for OIDs (with a limited capacity) is allocated in snmp_engine_get_bulk(). When snmp_engine_get_bulk() is populating the stack buffer, an overflow condition may occur due to lack of input length validation. This makes it possible to overwrite stack regions beyond the allocated buffer, including the return address from the function. As a result, the code execution path may be redirected to an address provided in the SNMP bulk get payload. If the target architecture uses common addressing space for program and data memory, it may also be possible to supply code in the SNMP request payload, and redirect the execution path to the remotely injected code, by modifying the function's return address. |
| CVE-2020-14934 | Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP agent. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. If the number of variables in the request exceeds the allocated buffer, a memory write out of the buffer boundaries occurs. This write operation provides a possibility to overwrite other variables allocated in the .bss section by the application. Because the sender of the frame is in control of the content that will be written beyond the buffer limits, and there is no strict process memory separation, this issue may allow overwriting of sensitive memory areas of an IoT device. |
| CVE-2020-12141 | An out-of-bounds read in the SNMP stack in Contiki-NG 4.4 and earlier allows an attacker to cause a denial of service and potentially disclose information via crafted SNMP packets to snmp_ber_decode_string_len_buffer in os/net/app-layer/snmp/snmp-ber.c. |
| CVE-2020-11749 | Pandora FMS 7.0 NG <= 746 suffers from Multiple XSS vulnerabilities in different browser views. A network administrator scanning a SNMP device can trigger a Cross Site Scripting (XSS), which can run arbitrary code to allow Remote Code Execution as root or apache2. |
| CVE-2020-11698 | An issue was discovered in Titan SpamTitan 7.07. Improper input sanitization of the parameter community on the page snmp-x.php would allow a remote attacker to inject commands into the file snmpd.conf that would allow executing commands on the target server. |
| CVE-2020-11489 | NVIDIA DGX servers, all DGX-1 with BMC firmware versions prior to 3.38.30 and all DGX-2 with BMC firmware versions prior to 1.06.06, contain a vulnerability in the AMI BMC firmware in which default SNMP community strings are used, which may lead to information disclosure. |
| CVE-2019-9931 | Various Lexmark printers contain a denial of service vulnerability in the SNMP service that can be exploited to crash the device. |
| CVE-2019-9162 | In the Linux kernel before 4.20.12, net/ipv4/netfilter/nf_nat_snmp_basic_main.c in the SNMP NAT module has insufficient ASN.1 length checks (aka an array index error), making out-of-bounds read and write operations possible, leading to an OOPS or local privilege escalation. This affects snmp_version and snmp_helper. |
| CVE-2019-6813 | A CWE-754: Improper Check for Unusual or Exceptional Conditions vulnerability exists in BMXNOR0200H Ethernet / Serial RTU module (all firmware versions) and Modicon M340 controller (all firmware versions), which could cause denial of service when truncated SNMP packets on port 161/UDP are received by the device. |
| CVE-2019-6806 | A CWE-200: Information Exposure vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum, and Modicon Premium which could cause the disclosure of SNMP information when reading variables in the controller using Modbus. |
| CVE-2019-6688 | On BIG-IP versions 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5 and BIG-IQ versions 6.0.0-6.1.0 and 5.2.0-5.4.0, a user is able to obtain the secret that was being used to encrypt a BIG-IP UCS backup file while sending SNMP query to the BIG-IP or BIG-IQ system, however the user can not access to the UCS files. |
| CVE-2019-6640 | On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.1-11.5.8, SNMP exposes sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is inserted into various profile types and accessed using SNMPv2. |
| CVE-2019-6613 | On BIG-IP 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, SNMP may expose sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is used with various profile types and is accessed using SNMPv2. |
| CVE-2019-6608 | On BIG-IP 11.5.1-11.6.3, 12.1.0-12.1.3, 13.0.0-13.1.1.1, and 14.0.0-14.0.0.2, under certain conditions, the snmpd daemon may leak memory on a multi-blade BIG-IP vCMP guest when processing authorized SNMP requests. |
| CVE-2019-6606 | On BIG-IP 11.5.1-11.6.3.4, 12.1.0-12.1.3.7, 13.0.0-13.1.1.3, and 14.0.0-14.0.0.2, when processing certain SNMP requests with a request-id of 0, the snmpd process may leak a small amount of memory. |
| CVE-2019-6577 | A vulnerability has been identified in SIMATIC HMI Comfort Panels 4" - 22" (All versions < V15.1 Update 1), SIMATIC HMI Comfort Outdoor Panels 7" & 15" (All versions < V15.1 Update 1), SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 und KTP900F (All versions < V15.1 Update 1), SIMATIC WinCC Runtime Advanced (All versions < V15.1 Update 1), SIMATIC WinCC Runtime Professional (All versions < V15.1 Update 1), SIMATIC WinCC (TIA Portal) (All versions < V15.1 Update 1), SIMATIC HMI Classic Devices (TP/MP/OP/MP Mobile Panel) (All versions). The integrated web server could allow Cross-Site Scripting (XSS) attacks if an attacker is able to modify particular parts of the device configuration via SNMP. The security vulnerability could be exploited by an attacker with network access to the affected system. Successful exploitation requires system privileges and user interaction. An attacker could use the vulnerability to compromise confidentiality and the integrity of the affected system. At the stage of publishing this security advisory no public exploitation is known. |
| CVE-2019-6572 | A vulnerability has been identified in SIMATIC HMI Comfort Panels 4" - 22" (All versions < V15.1 Update 1), SIMATIC HMI Comfort Outdoor Panels 7" & 15" (All versions < V15.1 Update 1), SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 und KTP900F (All versions < V15.1 Update 1), SIMATIC WinCC Runtime Advanced (All versions < V15.1 Update 1), SIMATIC WinCC Runtime Professional (All versions < V15.1 Update 1), SIMATIC WinCC (TIA Portal) (All versions < V15.1 Update 1), SIMATIC HMI Classic Devices (TP/MP/OP/MP Mobile Panel) (All versions). The affected device offered SNMP read and write capacities with a publicly know hardcoded community string. The security vulnerability could be exploited by an attacker with network access to the affected device. Successful exploitation requires no system privileges and no user interaction. An attacker could use the vulnerability to compromise confidentiality and integrity of the affected system. At the time of advisory publication no public exploitation of this security vulnerability was known. |
| CVE-2019-5165 | An exploitable authentication bypass vulnerability exists in the hostname processing of the Moxa AWK-3131A firmware version 1.13. A specially configured device hostname can cause the device to interpret select remote traffic as local traffic, resulting in a bypass of web authentication. An attacker can send authenticated SNMP requests to trigger this vulnerability. |
| CVE-2019-3926 | Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 are vulnerable to command injection via SNMP OID iso.3.6.1.4.1.3212.100.3.2.14.1. A remote, unauthenticated attacker can use this vulnerability to execute operating system commands as root. |
| CVE-2019-3925 | Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 are vulnerable to command injection via SNMP OID iso.3.6.1.4.1.3212.100.3.2.9.3. A remote, unauthenticated attacker can use this vulnerability to execute operating system commands as root. |
| CVE-2019-20892 | net-snmp before 5.8.1.pre1 has a double free in usm_free_usmStateReference in snmplib/snmpusm.c via an SNMPv3 GetBulk request. NOTE: this affects net-snmp packages shipped to end users by multiple Linux distributions, but might not affect an upstream release. |
| CVE-2019-1969 | A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) Access Control List (ACL) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic. The vulnerability is due to an incorrect length check when the configured ACL name is the maximum length, which is 32 ASCII characters. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP polling that should have been denied. The attacker has no control of the configuration of the SNMP ACL name. |
| CVE-2019-1963 | A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of Abstract Syntax Notation One (ASN.1)-encoded variables in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the SNMP daemon on the affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. |
| CVE-2019-19276 | A vulnerability has been identified in SIMATIC HMI Comfort Panels 1st Generation (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels (All versions < V16 Update 4). Specially crafted packets sent to port 161/udp can cause the SNMP service of affected devices to crash. A manual restart of the device is required to resume operation of the service. |
| CVE-2019-19108 | An authentication weakness in the SNMP service in B&R Automation Runtime versions 2.96, 3.00, 3.01, 3.06 to 3.10, 4.00 to 4.63, 4.72 and above allows unauthenticated users to modify the configuration of B&R products via SNMP. |
| CVE-2019-1858 | A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the SNMP application to leak system memory, which could cause an affected device to restart unexpectedly. The vulnerability is due to improper error handling when processing inbound SNMP packets. An attacker could exploit this vulnerability by sending multiple crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the SNMP application to leak system memory because of an improperly handled error condition during packet processing. Over time, this memory leak could cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. |
| CVE-2019-1806 | A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco Small Business Sx200, Sx300, Sx500, ESW2 Series Managed Switches and Small Business Sx250, Sx350, Sx550 Series Switches could allow an authenticated, remote attacker to cause the SNMP application of an affected device to cease processing traffic, resulting in the CPU utilization reaching one hundred percent. Manual intervention may be required before a device resumes normal operations. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a malicious SNMP packet to an affected device. A successful exploit could allow the attacker to cause the device to cease forwarding traffic, which could result in a denial of service (DoS) condition. Cisco has released firmware updates that address this vulnerability. |
| CVE-2019-17276 | OnCommand System Manager versions 9.3 prior to 9.3P18 and 9.4 prior to 9.4P2 are susceptible to a cross site scripting vulnerability that could allow an authenticated attacker to inject arbitrary scripts into the SNMP Community Names label field. |
| CVE-2019-16651 | An issue was discovered on Virgin Media Super Hub 3 (based on ARRIS TG2492) devices. Because their SNMP commands have insufficient protection mechanisms, it is possible to use JavaScript and DNS rebinding to leak the WAN IP address of a user (if they are using certain VPN implementations, this would decloak them). |
| CVE-2019-16320 | Cobham Sea Tel v170 224521 through v194 225444 devices allow attackers to obtain potentially sensitive information, such as a vessel's latitude and longitude, via the public SNMP community. |
| CVE-2019-16102 | Silver Peak EdgeConnect SD-WAN before 8.1.7.x has an SNMP service with a public value for rocommunity and trapcommunity. |
| CVE-2019-16072 | An OS command injection vulnerability in the discover_and_manage CGI script in NETSAS Enigma NMS 65.0.0 and prior allows an attacker to execute arbitrary code because of improper neutralization of shell metacharacters in the ip_address variable within an snmp_browser action. |
| CVE-2019-16069 | A number of stored Cross-site Scripting (XSS) vulnerabilities were identified in NETSAS Enigma NMS 65.0.0 and prior that could allow a threat actor to inject malicious code directly into the application through the SNMP protocol. |
| CVE-2019-16027 | A vulnerability in the implementation of the Intermediate System–to–Intermediate System (IS–IS) routing protocol functionality in Cisco IOS XR Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition in the IS–IS process. The vulnerability is due to improper handling of a Simple Network Management Protocol (SNMP) request for specific Object Identifiers (OIDs) by the IS–IS process. An attacker could exploit this vulnerability by sending a crafted SNMP request to the affected device. A successful exploit could allow the attacker to cause a DoS condition in the IS–IS process. |
| CVE-2019-14600 | Uncontrolled search path element in the installer for Intel(R) SNMP Subagent Stand-Alone for Windows* may allow an authenticated user to potentially enable escalation of privilege via local access. |
| CVE-2019-14307 | Several Ricoh printers have multiple buffer overflows parsing HTTP parameter settings for SNMP, which allow an attacker to cause a denial of service or code execution via crafted requests to the web server. Affected firmware versions depend on the printer models. One affected configuration is cpe:2.3:o:ricoh:sp_c250dn_firmware:-:*:*:*:*:*:*:* up to (including) 1.06 running on cpe:2.3:o:ricoh:sp_c250dn:-:*:*:*:*:*:*:*, cpe:2.3:o:ricoh:sp_c252dn:-:*:*:*:*:*:*:*. Another affected configuration is cpe:2.3:o:ricoh:sp_c250sf_firmware:-:*:*:*:*:*:*:* up to (including) 1.12 running on cpe:2.3:o:ricoh:sp_c250sf:-:*:*:*:*:*:*:*, cpe:2.3:o:ricoh:sp_c252sf:-:*:*:*:*:*:*:*. |
| CVE-2019-13577 | SnmpAdm.exe in MAPLE WBT SNMP Administrator v2.0.195.15 has an Unauthenticated Remote Buffer Overflow via a long string to the CE Remote feature listening on Port 987. |
| CVE-2019-13070 | A stored XSS vulnerability in the Agent/Center component of CyberPower PowerPanel Business Edition 3.4.0 allows a privileged attacker to embed malicious JavaScript in the SNMP trap receivers form. Upon visiting the /agent/action_recipient Event Action/Recipient page, the embedded code will be executed in the browser of the victim. |
| CVE-2019-13023 | An issue was discovered in all versions of Bond JetSelect. Within the JetSelect Application, the web interface hides RADIUS secrets, WPA passwords, and SNMP strings from 'non administrative' users using HTML 'password field' obfuscation. By using Developer tools or similar, it is possible to change the obfuscation so that the credentials are visible. |
| CVE-2019-11025 | In clearFilter() in utilities.php in Cacti before 1.2.3, no escaping occurs before printing out the value of the SNMP community string (SNMP Options) in the View poller cache, leading to XSS. |
| CVE-2019-10887 | A reflected HTML injection vulnerability on Salicru SLC-20-cube3(5) devices running firmware version cs121-SNMP v4.54.82.130611 allows remote attackers to inject arbitrary HTML elements via a /DataLog.csv?log= or /AlarmLog.csv?log= or /waitlog.cgi?name= or /chart.shtml?data= or /createlog.cgi?name= request. |
| CVE-2019-0043 | In MPLS environments, receipt of a specific SNMP packet may cause the routing protocol daemon (RPD) process to crash and restart. By continuously sending a specially crafted SNMP packet, an attacker can repetitively crash the RPD process causing prolonged denial of service. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS : 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D75 on SRX Series; 14.1X53 versions prior to 14.1X53-D48 on EX/QFX series; 15.1 versions prior to 15.1R4-S9, 15.1R7-S2; 15.1F6 versions prior to 15.1F6-S11; 15.1X49 versions prior to 15.1X49-D141, 15.1X49-D144, 15.1X49-D150 on SRX Series; 15.1X53 versions prior to 15.1X53-D234 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D68 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 15.1X53 versions prior to 15.1X53-D590 on EX2300/EX3400 Series; 15.1X54 on ACX Series; 16.1 versions prior to 16.1R3-S10, 16.1R4-S11, 16.1R6-S5, 16.1R7; 16.1X65 versions prior to 16.1X65-D48; 16.2 versions prior to 16.2R2-S6; 17.1 versions prior to 17.1R2-S8, 17.1R3; 17.2 versions prior to 17.2R1-S7, 17.2R3; 17.2X75 versions prior to 17.2X75-D92, 17.2X75-D102, 17.2X75-D110; 17.3 versions prior to 17.3R3; 17.4 versions prior to 17.4R1-S4, 17.4R2; 18.1 versions prior to 18.1R1-S1, 18.1R2-S1, 18.1R3; 18.2X75 versions prior to 18.2X75-D10. |
| CVE-2018-9280 | An issue was discovered on Eaton UPS 9PX 8000 SP devices. The appliance discloses the SNMP version 3 user's password. The web page displayed by the appliance contains the password in cleartext. Passwords of the read and write users could be retrieved by browsing the source code of the webpage. |
| CVE-2018-8938 | A Code Injection issue was discovered in DlgSelectMibFile.asp in Ipswitch WhatsUp Gold before 2018 (18.0). Malicious actors can inject a specially crafted SNMP MIB file that could allow them to execute arbitrary commands and code on the WhatsUp Gold server. |
| CVE-2018-7848 | A CWE-200: Information Exposure vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum, and Modicon Premium which could cause the disclosure of SNMP information when reading files from the controller over Modbus |
| CVE-2018-7844 | A CWE-200: Information Exposure vulnerability exists in all versions of the Modicon M580, Modicon M340, Modicon Quantum, and Modicon Premium which could cause the disclosure of SNMP information when reading memory blocks from the controller over Modbus. |
| CVE-2018-7278 | An issue was discovered on RLE Protocol Converter FDS-PC / FDS-PC-DP 2.1 devices. Persistent XSS exists in the web server. Remote attackers can inject malicious JavaScript code using the device's BACnet implementation. This is similar to a Cross Protocol Injection with SNMP. |
| CVE-2018-7277 | An issue was discovered on RLE Wi-MGR/FDS-Wi 6.2 devices. Persistent XSS exists in the web server. Remote attackers can inject malicious JavaScript code using the device's BACnet implementation. This is similar to a Cross Protocol Injection with SNMP. |
| CVE-2018-5071 | Persistent XSS exists in the web server on Cobham Sea Tel 116 build 222429 satellite communication system devices: remote attackers can inject malicious JavaScript code using the device's TELNET shell built-in commands, as demonstrated by the "set ship name" command. This is similar to a Cross Protocol Injection with SNMP. |
| CVE-2018-20445 | D-Link DCM-604 DCM604_C1_ViaCabo_1.04_20130606 and DCM-704 EU_DCM-704_1.10 devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.3.32 and iso.3.6.1.4.1.4413.2.2.2.1.5.4.2.4.1.2.32 SNMP requests. |
| CVE-2018-20444 | Technicolor CGA0111 CGA0111E-ES-13-E23E-c8000r5712-170217-0829-TRU devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.3.10001 and 1.3.6.1.4.1.4413.2.2.2.1.18.1.2.3.4.1.2.10001 SNMP requests. |
| CVE-2018-20443 | Technicolor TC7200.d1I TC7200.d1IE-N23E-c7000r5712-170406-HAT devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.3.10001 and 1.3.6.1.4.1.4413.2.2.2.1.18.1.2.3.4.1.2.10001 SNMP requests. |
| CVE-2018-20442 | Technicolor TC7110.B STC8.62.02 devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.2863.205.10.1.30.4.1.14.1.3.32 and iso.3.6.1.4.1.2863.205.10.1.30.4.2.4.1.2.32 SNMP requests. |
| CVE-2018-20441 | Technicolor TC7200.TH2v2 SC05.00.22 devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.2863.205.10.1.30.4.1.14.1.3.32 and iso.3.6.1.4.1.2863.205.10.1.30.4.2.4.1.2.32 SNMP requests. |
| CVE-2018-20440 | Technicolor CWA0101 CWA0101E-A23E-c7000r5712-170315-SKC devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.3.10001 and 1.3.6.1.4.1.4413.2.2.2.1.18.1.2.3.4.1.2.10001 SNMP requests. |
| CVE-2018-20439 | Technicolor DPC3928SL D3928SL-PSIP-13-A010-c3420r55105-170214a devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.3.10001 and 1.3.6.1.4.1.4413.2.2.2.1.18.1.2.3.4.1.2.10001 SNMP requests. |
| CVE-2018-20438 | Technicolor TC7110.AR STD3.38.03 devices allow remote attackers to discover Wi-Fi credentials via iso.3.6.1.4.1.2863.205.10.1.30.4.1.14.1.3.32 and iso.3.6.1.4.1.2863.205.10.1.30.4.2.4.1.2.32 SNMP requests. |
| CVE-2018-20401 | Zoom 5352 v5.5.8.6Y devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20400 | Ubee DVW2108 6.28.1017 and DVW2110 6.28.2012 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20399 | Motorola SBG901 SBG901-2.10.1.1-GA-00-581-NOSH, SBG941 SBG941-2.11.0.0-GA-07-624-NOSH, and SVG1202 SVG1202-2.1.0.0-GA-14-LTSH devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20398 | Skyworth CM5100 V1.1.0, CM5100-440 V1.2.1, CM5100-511 4.1.0.14, CM5100-GHD00 V1.2.2, and CM5100.g2 4.1.0.17 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20397 | mplus CBC383Z CBC383Z_mplus_MDr026 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20396 | NET&SYS MNG2120J 5.76.1006c and MNG6300 5.83.6305jrc2 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20395 | NETWAVE MNG6200 C4835805jrc12FU121413.cpr devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20394 | Thomson DWG849 STC0.01.16, DWG850-4 ST9C.05.25, DWG855 ST80.20.26, and TWG870 STB2.01.36 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20393 | Technicolor CGA0111 CGA0111E-ES-13-E23E-c8000r5712-170217-0829-TRU, CWA0101 CWA0101E-A23E-c7000r5712-170315-SKC, DPC3928SL D3928SL-PSIP-13-A010-c3420r55105-170214a, TC7110.AR STD3.38.03, TC7110.B STC8.62.02, TC7110.D STDB.79.02, TC7200.d1I TC7200.d1IE-N23E-c7000r5712-170406-HAT, and TC7200.TH2v2 SC05.00.22 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20392 | S-A WebSTAR DPC2100 v2.0.2r1256-060303 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20391 | TEKNOTEL CBW700N 81.447.392110.729.024 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20390 | Kaonmedia CG2001-AN22A 1.2.1, CG2001-UDBNA 3.0.8, and CG2001-UN2NA 3.0.8 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20389 | D-Link DCM-604 DCM604_C1_ViaCabo_1.04_20130606 and DCM-704 EU_DCM-704_1.10 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20388 | Comtrend CM-6200un 123.447.007 and CM-6300n 123.553mp1.005 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20387 | Bnmux BCW700J 5.20.7, BCW710J 5.30.6a, and BCW710J2 5.30.16 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20386 | ARRIS SBG6580-2 D30GW-SEAEAGLE-1.5.2.5-GA-00-NOSH devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20385 | CastleNet CBV38Z4EC 125.553mp1.39219mp1.899.007, CBV38Z4ECNIT 125.553mp1.39219mp1.899.005ITT, CBW383G4J 37.556mp5.008, and CBW38G4J 37.553mp1.008 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20384 | iNovo Broadband IB-8120-W21 139.4410mp1.004200.002 and IB-8120-W21E1 139.4410mp1.3921132mp1.899.004404.004 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20383 | ARRIS DG950A 7.10.145 and DG950S 7.10.145.EURO devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20382 | Jiuzhou BCM93383WRG 139.4410mp1.3921132mp1.899.004404.004 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20381 | Technicolor DPC2320 dpc2300r2-v202r1244101-150420a-v6 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-20380 | Ambit DDW2600 5.100.1009, DDW2602 5.105.1003, T60C926 4.64.1012, and U10C019 5.66.1026 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. |
| CVE-2018-19281 | Centreon 3.4.x (fixed in Centreon 18.10.0 and Centreon web 2.8.27) allows SNMP trap SQL Injection. |
| CVE-2018-19132 | Squid before 4.4, when SNMP is enabled, allows a denial of service (Memory Leak) via an SNMP packet. |
| CVE-2018-19016 | Rockwell Automation EtherNet/IP Web Server Modules 1756-EWEB (includes 1756-EWEBK) Version 5.001 and earlier, and CompactLogix 1768-EWEB Version 2.005 and earlier. A remote attacker could send a crafted UDP packet to the SNMP service causing a denial-of-service condition to occur until the affected product is restarted. |
| CVE-2018-18960 | An issue was discovered on Epson WorkForce WF-2861 10.48 LQ22I3, 10.51.LQ20I6 and 10.52.LQ17IA devices. They use SNMP to find certain devices on the network, but the default version is v2c, allowing an amplification attack. |
| CVE-2018-18066 | snmp_oid_compare in snmplib/snmp_api.c in Net-SNMP before 5.8 has a NULL Pointer Exception bug that can be used by an unauthenticated attacker to remotely cause the instance to crash via a crafted UDP packet, resulting in Denial of Service. |
| CVE-2018-18065 | _set_key in agent/helpers/table_container.c in Net-SNMP before 5.8 has a NULL Pointer Exception bug that can be used by an authenticated attacker to remotely cause the instance to crash via a crafted UDP packet, resulting in Denial of Service. |
| CVE-2018-17969 | Samsung SCX-6545X V2.00.03.01 03-23-2012 devices allows remote attackers to discover cleartext credentials via iso.3.6.1.4.1.236.11.5.11.81.10.1.5.0 and iso.3.6.1.4.1.236.11.5.11.81.10.1.6.0 SNMP requests. |
| CVE-2018-16498 | In Versa Director, the unencrypted backup files stored on the Versa deployment contain credentials stored within configuration files. These credentials are for various application components such as SNMP, and SSL and Trust keystores. |
| CVE-2018-16210 | WAGO 750-88X and WAGO 750-89X Ethernet Controller devices, versions 01.09.18(13) and before, have XSS in the SNMP configuration via the webserv/cplcfg/snmp.ssi SNMP_DESC or SNMP_LOC_SNMP_CONT field. |
| CVE-2018-1244 | Dell EMC iDRAC7/iDRAC8, versions prior to 2.60.60.60, and iDRAC9 versions prior to 3.21.21.21 contain a command injection vulnerability in the SNMP agent. A remote authenticated malicious iDRAC user with configuration privileges could potentially exploit this vulnerability to execute arbitrary commands on the iDRAC where SNMP alerting is enabled. |
| CVE-2018-12318 | Information disclosure in the SNMP settings page in ASUSTOR ADM version 3.1.1 allows attackers to obtain the SNMP password in cleartext. |
| CVE-2018-12313 | OS command injection in snmp.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands without authentication via the "rocommunity" URL parameter. |
| CVE-2018-1000116 | NET-SNMP version 5.7.2 contains a heap corruption vulnerability in the UDP protocol handler that can result in command execution. |
| CVE-2018-0967 | A denial of service vulnerability exists in the way that Windows SNMP Service handles malformed SNMP traps, aka "Windows SNMP Service Denial of Service Vulnerability." This affects Windows 7, Windows Server 2012 R2, Windows RT 8.1, Windows Server 2008, Windows Server 2012, Windows 8.1, Windows Server 2016, Windows Server 2008 R2, Windows 10, Windows 10 Servers. |
| CVE-2018-0456 | A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application of an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. |
| CVE-2018-0329 | A vulnerability in the default configuration of the Simple Network Management Protocol (SNMP) feature of Cisco Wide Area Application Services (WAAS) Software could allow an unauthenticated, remote attacker to read data from an affected device via SNMP. The vulnerability is due to a hard-coded, read-only community string in the configuration file for the SNMP daemon. An attacker could exploit this vulnerability by using the static community string in SNMP version 2c queries to an affected device. A successful exploit could allow the attacker to read any data that is accessible via SNMP on the affected device. Note: The static credentials are defined in an internal configuration file and are not visible in the current operation configuration ('running-config') or the startup configuration ('startup-config'). Cisco Bug IDs: CSCvi40137. |
| CVE-2018-0309 | A vulnerability in the implementation of a specific CLI command and the associated Simple Network Management Protocol (SNMP) MIB for Cisco NX-OS (in standalone NX-OS mode) on Cisco Nexus 3000 and 9000 Series Switches could allow an authenticated, remote attacker to exhaust system memory on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect implementation of the CLI command, resulting in a failure to free all allocated memory upon completion. An attacker could exploit this vulnerability by authenticating to the affected device and repeatedly issuing a specific CLI command or sending a specific SNMP poll request for a specific Object Identifier (OID). A successful exploit could allow the attacker to cause the IP routing process to restart or to cause a device reset, resulting in a DoS condition. Cisco Bug IDs: CSCvf23136. |
| CVE-2018-0299 | A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco NX-OS on the Cisco Nexus 4000 Series Switch could allow an authenticated, remote attacker to cause the device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete validation of an SNMP poll request for a specific MIB. An attacker could exploit this vulnerability by sending a specific SNMP poll request to the targeted device. An exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvg10442. |
| CVE-2018-0291 | A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuw99630, CSCvg71290, CSCvj67977. |
| CVE-2018-0209 | A vulnerability in the Simple Network Management Protocol (SNMP) subsystem communication channel through the Cisco 550X Series Stackable Managed Switches could allow an authenticated, remote attacker to cause the device to reload unexpectedly, causing a denial of service (DoS) condition. The device nay need to be manually reloaded to recover. The vulnerability is due to lack of proper input throttling of ingress SNMP traffic over an internal interface. An attacker could exploit this vulnerability by sending a crafted, heavy stream of SNMP traffic to the targeted device. An exploit could allow the attacker to cause the device to reload unexpectedly, causing a DoS condition. Cisco Bug IDs: CSCvg22135. |
| CVE-2018-0161 | A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software running on certain models of Cisco Catalyst Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition, aka a GET MIB Object ID Denial of Service Vulnerability. The vulnerability is due to a condition that could occur when the affected software processes an SNMP read request that contains a request for the ciscoFlashMIB object ID (OID). An attacker could trigger this vulnerability by issuing an SNMP GET request for the ciscoFlashMIB OID on an affected device. A successful exploit could cause the affected device to restart due to a SYS-3-CPUHOG. This vulnerability affects the following Cisco devices if they are running a vulnerable release of Cisco IOS Software and are configured to use SNMP Version 2 (SNMPv2) or SNMP Version 3 (SNMPv3): Cisco Catalyst 2960-L Series Switches, Cisco Catalyst Digital Building Series Switches 8P, Cisco Catalyst Digital Building Series Switches 8U. Cisco Bug IDs: CSCvd89541. |
| CVE-2018-0160 | A vulnerability in Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper management of memory resources, referred to as a double free. An attacker could exploit this vulnerability by sending crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. To exploit this vulnerability via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for an affected system. To exploit this vulnerability via SNMP Version 3, the attacker must know the user credentials for the affected system. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, have been configured to be queried over SNMP, and have Network Address Translation (NAT) enabled. Cisco Bug IDs: CSCve75818. |
| CVE-2018-0019 | A vulnerability in Junos OS SNMP MIB-II subagent daemon (mib2d) may allow a remote network based attacker to cause the mib2d process to crash resulting in a denial of service condition (DoS) for the SNMP subsystem. While a mib2d process crash can disrupt the network monitoring via SNMP, it does not impact routing, switching or firewall functionalities. SNMP is disabled by default on devices running Junos OS. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D76; 12.3 versions prior to 12.3R12-S7, 12.3R13; 12.3X48 versions prior to 12.3X48-D65; 14.1 versions prior to 14.1R9; 14.1X53 versions prior to 14.1X53-D130; 15.1 versions prior to 15.1F2-S20, 15.1F6-S10, 15.1R7; 15.1X49 versions prior to 15.1X49-D130; 15.1X53 versions prior to 15.1X53-D233, 15.1X53-D471, 15.1X53-D472, 15.1X53-D58, 15.1X53-D66; 16.1 versions prior to 16.1R5-S3, 16.1R7; 16.1X65 versions prior to 16.1X65-D47; 16.1X70 versions prior to 16.1X70-D10; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R2-S6, 17.1R3; |
| CVE-2017-9496 | The Comcast firmware on Motorola MX011ANM (firmware version MX011AN_2.9p6s1_PROD_sey) devices allows physically proximate attackers to access an SNMP server by connecting a cable to the Ethernet port, and then establishing communication with the device's link-local IPv6 address. |
| CVE-2017-8217 | TP-Link C2 and C20i devices through firmware 0.9.1 4.2 v0032.0 Build 160706 Rel.37961n have too permissive iptables rules, e.g., SNMP is not blocked on any interface. |
| CVE-2017-7922 | An Improper Privilege Management issue was discovered in Cambium Networks ePMP. The privileges for SNMP community strings are not properly restricted, which may allow an attacker to gain access to sensitive information and possibly allow for configuration changes. |
| CVE-2017-7918 | An Improper Access Control issue was discovered in Cambium Networks ePMP. After a valid user has used SNMP configuration export, an attacker is able to remotely trigger device configuration backups using specific MIBs. These backups lack proper access control and may allow access to sensitive information and possibly allow for configuration changes. |
| CVE-2017-7352 | Stored Cross-site scripting (XSS) vulnerability in Pure Storage Purity 4.7.5 allows remote authenticated users to inject arbitrary web script or HTML via the "host" parameter on the 'System > Configuration > SNMP > Add SNMP Trap Manager' screen. |
| CVE-2017-6783 | A vulnerability in SNMP polling for the Cisco Web Security Appliance (WSA), Email Security Appliance (ESA), and Content Security Management Appliance (SMA) could allow an authenticated, remote attacker to discover confidential information about the appliances that should be available only to an administrative user. The vulnerability occurs because the appliances do not protect confidential information at rest in response to Simple Network Management Protocol (SNMP) poll requests. An attacker could exploit this vulnerability by doing a crafted SNMP poll request to the targeted security appliance. An exploit could allow the attacker to discover confidential information that should be restricted, and the attacker could use this information to conduct additional reconnaissance. The attacker must know the configured SNMP community string to exploit this vulnerability. Cisco Bug IDs: CSCve26106, CSCve26202, CSCve26224. Known Affected Releases: 10.0.0-230 (Web Security Appliance), 9.7.2-065 (Email Security Appliance), and 10.1.0-037 (Content Security Management Appliance). |
| CVE-2017-6744 | The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. |
| CVE-2017-6743 | The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve60376, CSCve78027. |
| CVE-2017-6742 | The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve54313. |
| CVE-2017-6741 | The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve66658. |
| CVE-2017-6740 | The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve66601. |
| CVE-2017-6739 | The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve66540. |
| CVE-2017-6738 | The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve89865, CSCsy56638. |
| CVE-2017-6737 | The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve60402. |
| CVE-2017-6736 | The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve57697. |
| CVE-2017-6615 | A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE 3.16 could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a race condition that could occur when the affected software processes an SNMP read request that contains certain criteria for a specific object ID (OID) and an active crypto session is disconnected on an affected device. An attacker who can authenticate to an affected device could trigger this vulnerability by issuing an SNMP request for a specific OID on the device. A successful exploit will cause the device to restart due to an attempt to access an invalid memory region. The attacker does not control how or when crypto sessions are disconnected on the device. Cisco Bug IDs: CSCvb94392. |
| CVE-2017-5483 | The SNMP parser in tcpdump before 4.9.0 has a buffer overflow in print-snmp.c:asn1_parse(). |
| CVE-2017-5262 | In versions 4.3.2-R4 and prior of Cambium Networks cnPilot firmware, the SNMP read-only (RO) community string has access to sensitive information by OID reference. |
| CVE-2017-5258 | In version 3.5 and prior of Cambium Networks ePMP firmware, an attacker who knows or can guess the RW community string can provide a URL for a configuration file over SNMP with XSS strings in certain SNMP OIDs, serve it via HTTP, and the affected device will perform a configuration restore using the attacker's supplied config file, including the inserted XSS strings. |
| CVE-2017-5257 | In version 3.5 and prior of Cambium Networks ePMP firmware, an attacker who knows (or guesses) the SNMP read/write (RW) community string can insert XSS strings in certain SNMP OIDs which will execute in the context of the currently-logged on user. |
| CVE-2017-5135 | Certain Technicolor devices have an SNMP access-control bypass, possibly involving an ISP customization in some cases. The Technicolor (formerly Cisco) DPC3928SL with firmware D3928SL-P15-13-A386-c3420r55105-160127a could be reached by any SNMP community string from the Internet; also, you can write in the MIB because it provides write properties, aka Stringbleed. NOTE: the string-bleed/StringBleed-CVE-2017-5135 GitHub repository is not a valid reference as of 2017-04-27; it contains Trojan horse code purported to exploit this vulnerability. |
| CVE-2017-3820 | A vulnerability in Simple Network Management Protocol (SNMP) functions of Cisco ASR 1000 Series Aggregation Services Routers running Cisco IOS XE Software Release 3.13.6S, 3.16.2S, or 3.17.1S could allow an authenticated, remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. More Information: CSCux68796. Known Affected Releases: 15.5(3)S2.1 15.6(1)S1.1. Known Fixed Releases: 15.4(3)S6.1 15.4(3)S6.2 15.5(3)S2.2 15.5(3)S3 15.6(0.22)S0.23 15.6(1)S2 16.2(0.295) 16.3(0.94) 15.5.3S3. |
| CVE-2017-2345 | On Junos OS devices with SNMP enabled, a network based attacker with unfiltered access to the RE can cause the Junos OS snmpd daemon to crash and restart by sending a crafted SNMP packet. Repeated crashes of the snmpd daemon can result in a partial denial of service condition. Additionally, it may be possible to craft a malicious SNMP packet in a way that can result in remote code execution. SNMP is disabled in Junos OS by default. Junos OS devices with SNMP disabled are not affected by this issue. No other Juniper Networks products or platforms are affected by this issue. NOTE: This is a different issue than Cisco CVE-2017-6736, CVE-2017-6737, and CVE-2017-6738. Affected releases are Juniper Networks Junos OS 12.1X46 prior to 12.1X46-D67; 12.3X48 prior to 12.3X48-D51, 12.3X48-D55; 13.3 prior to 13.3R10-S2; 14.1 prior to 14.1R2-S10, 14.1R8-S4, 14.1R9; 14.1X50 prior to 14.1X50-D185; 14.1X53 prior to 14.1X53-D122, 14.1X53-D44, 14.1X53-D50; 14.2 prior to 14.2R4-S9, 14.2R7-S7, 14.2R8; 15.1 prior to 15.1F2-S18, 15.1F6-S7, 15.1R4-S8, 15.1R5-S5, 15.1R6-S1, 15.1R7; 15.1X49 prior to 15.1X49-D100, 15.1X49-D110; 15.1X53 prior to 15.1X53-D231, 15.1X53-D47, 15.1X53-D48, 15.1X53-D57, 15.1X53-D64, 15.1X53-D70; 16.1 prior to 16.1R3-S4, 16.1R4-S3, 16.1R4-S4, 16.1R5; 16.2 prior to 16.2R2, 16.2R3; 17.1 prior to 17.1R1-S3, 17.1R2, 17.1R3; 17.2 prior to 17.2R1-S1, 17.2R2; 17.2X75 prior to 17.2X75-D30. Junos releases prior to 10.2 are not affected. |
| CVE-2017-16820 | The csnmp_read_table function in snmp.c in the SNMP plugin in collectd before 5.6.3 is susceptible to a double free in a certain error case, which could lead to a crash (or potentially have other impact). |
| CVE-2017-14462 | An exploitable access control vulnerability exists in the data, program, and function file permissions functionality of Allen Bradley Micrologix 1400 Series B FRN 21.2 and before. A specially crafted packet can cause a read or write operation resulting in disclosure of sensitive information, modification of settings, or modification of ladder logic. An attacker can send unauthenticated packets to trigger this vulnerability. Required Keyswitch State: REMOTE or PROG (also RUN for some) Description: Allows an attacker to enable SNMP, Modbus, DNP, and any other features in the channel configuration. Also allows attackers to change network parameters, such as IP address, name server, and domain name. |
| CVE-2017-12278 | A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco Wireless LAN Controllers could allow an authenticated, remote attacker to cause an affected device to restart, resulting in a denial of service (DoS) condition. The vulnerability is due to a memory leak that occurs on an affected device after the device fails to deallocate a buffer that is used when certain MIBs are polled. An attacker who knows the SNMP Version 2 SNMP Read string or has valid SNMP Version 3 credentials for an affected device could repeatedly poll the affected MIB object IDs (OIDs) and consume available memory on the device. When memory is sufficiently depleted on the device, the device will restart, resulting in a DoS condition. Cisco Bug IDs: CSCvc71674. |
| CVE-2017-12211 | A vulnerability in the IPv6 Simple Network Management Protocol (SNMP) code of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause high CPU usage or a reload of the device. The vulnerability is due to IPv6 sub block corruption. An attacker could exploit this vulnerability by polling the affected device IPv6 information. An exploit could allow the attacker to trigger high CPU usage or a reload of the device. Known Affected Releases: Denali-16.3.1. Cisco Bug IDs: CSCvb14640. |
| CVE-2017-12090 | An exploitable denial of service vulnerability exists in the processing of snmp-set commands of the Allen Bradley Micrologix 1400 Series B FRN 21.2 and below. A specially crafted snmp-set request, when sent without associated firmware flashing snmp-set commands, can cause a device power cycle resulting in downtime for the device. An attacker can send one packet to trigger this vulnerability. |
| CVE-2017-11649 | Cross-site request forgery (CSRF) vulnerability in DrayTek Vigor AP910C devices with firmware 1.2.0_RC3 build r6594 allows remote attackers to hijack the authentication of unspecified users for requests that enable SNMP on the remote device via vectors involving goform/setSnmp. |
| CVE-2017-10611 | If extended statistics are enabled via 'set chassis extended-statistics', when executing any operation that fetches interface statistics, including but not limited to SNMP GET requests, the pfem process or the FPC may crash and restart. Repeated crashes of PFE processing can result in an extended denial of service condition. This issue only affects the following platforms: (1) EX2200, EX3300, XRE200 (2) MX Series routers with MPC7E/8E/9E PFEs installed, and only if 'extended-statistics' are enabled under the [edit chassis] configuration. Affected releases are Juniper Networks Junos OS 14.1 prior to 14.1R8-S5, 14.1R9 on MX Series; 14.1X53 prior to 14.1X53-D46, 14.1X53-D50 on EX2200, EX3300, XRE200; 14.2 prior to 14.2R7-S9, 14.2R8 on MX Series; 15.1 prior to 15.1F5-S8, 15.1F6-S8, 15.1R5-S3, 15.1R6 on MX Series; 16.1 prior to 16.1R4-S5, 16.1R5, 16.1R6 on MX Series; 16.1X65 prior to 16.1X65-D45 on EX2200, EX3300, XRE200; 16.2 prior to 16.2R2-S1, 16.2R3 on MX Series; 17.1 prior to 17.1R2-S2, 17.1R3 on MX Series; 17.2 prior to 17.2R1-S3, 17.2R2 on MX Series; 17.2X75 prior to 17.2X75-D50 on MX Series; 17.3 prior to 17.3R1-S1, 17.3R2 on MX Series. No other Juniper Networks products or platforms are affected by this issue. |
| CVE-2016-8562 | A vulnerability has been identified in SIMATIC CP 1543-1 (All versions < V2.0.28), SIPLUS NET CP 1543-1 (All versions < V2.0.28). Under special conditions it was possible to write SNMP variables on port 161/udp which should be read-only and should only be configured with TIA-Portal. A write to these variables could reduce the availability or cause a denial-of-service. |
| CVE-2016-8352 | An issue was discovered in Schneider Electric ConneXium firewalls TCSEFEC23F3F20 all versions, TCSEFEC23F3F21 all versions, TCSEFEC23FCF20 all versions, TCSEFEC23FCF21 all versions, and TCSEFEC2CF3F20 all versions. A stack-based buffer overflow can be triggered during the SNMP login authentication process that may allow an attacker to remotely execute code. |
| CVE-2016-6556 | OpenNMS version 18.0.1 and prior are vulnerable to a stored XSS issue due to insufficient filtering of SNMP agent supplied data. By creating a malicious SNMP 'sysName' or 'sysContact' response, an attacker can store an XSS payload which will trigger when a user of the web UI views the data. This issue was fixed in version 18.0.2, released on September 20, 2016. |
| CVE-2016-6555 | OpenNMS version 18.0.1 and prior are vulnerable to a stored XSS issue due to insufficient filtering of SNMP trap supplied data. By creating a malicious SNMP trap, an attacker can store an XSS payload which will trigger when a user of the web UI views the events list page. This issue was fixed in version 18.0.2, released on September 20, 2016. |
| CVE-2016-6375 | Cisco Wireless LAN Controller (WLC) devices before 8.0.140.0, 8.1.x and 8.2.x before 8.2.121.0, and 8.3.x before 8.3.102.0 allow remote attackers to cause a denial of service (device reload) by sending crafted Inter-Access Point Protocol (IAPP) packets and then sending a traffic stream metrics (TSM) information request over SNMP, aka Bug ID CSCuz40221. |
| CVE-2016-6366 | Buffer overflow in Cisco Adaptive Security Appliance (ASA) Software through 9.4.2.3 on ASA 5500, ASA 5500-X, ASA Services Module, ASA 1000V, ASAv, Firepower 9300 ASA Security Module, PIX, and FWSM devices allows remote authenticated users to execute arbitrary code via crafted IPv4 SNMP packets, aka Bug ID CSCva92151 or EXTRABACON. |
| CVE-2016-6295 | ext/snmp/snmp.c in PHP before 5.5.38, 5.6.x before 5.6.24, and 7.x before 7.0.9 improperly interacts with the unserialize implementation and garbage collection, which allows remote attackers to cause a denial of service (use-after-free and application crash) or possibly have unspecified other impact via crafted serialized data, a related issue to CVE-2016-5773. |
| CVE-2016-5645 | Rockwell Automation MicroLogix 1400 PLC 1766-L32BWA, 1766-L32AWA, 1766-L32BXB, 1766-L32BWAA, 1766-L32AWAA, and 1766-L32BXBA devices have a hardcoded SNMP community, which makes it easier for remote attackers to load arbitrary firmware updates by leveraging knowledge of this community. |
| CVE-2016-5642 | Opmantek NMIS before 8.5.12G has XSS via SNMP. |
| CVE-2016-5448 | Unspecified vulnerability in the ILOM component in Oracle Sun Systems Products Suite 3.0, 3.1, and 3.2 allows remote attackers to affect integrity and availability via vectors related to SNMP. |
| CVE-2016-5078 | Paessler PRTG before 16.2.24.4045 has XSS via SNMP. |
| CVE-2016-5077 | Netikus EventSentry before 3.2.1.44 has XSS via SNMP. |
| CVE-2016-5074 | CloudView NMS before 2.10a has a format string issue exploitable over SNMP. |
| CVE-2016-5073 | CloudView NMS before 2.10a has XSS via SNMP. |
| CVE-2016-4071 | Format string vulnerability in the php_snmp_error function in ext/snmp/snmp.c in PHP before 5.5.34, 5.6.x before 5.6.20, and 7.x before 7.0.5 allows remote attackers to execute arbitrary code via format string specifiers in an SNMP::get call. |
| CVE-2016-2509 | The password-sync feature on Belden Hirschmann Classic Platform switches L2B before 05.3.07 and L2E, L2P, L3E, and L3P before 09.0.06 sets an SNMP community to the same string as the administrator password, which allows remote attackers to obtain sensitive information by sniffing the network. |
| CVE-2016-1559 | D-Link DAP-1353 H/W vers. B1 3.15 and earlier, D-Link DAP-2553 H/W ver. A1 1.31 and earlier, and D-Link DAP-3520 H/W ver. A1 1.16 and earlier reveal wireless passwords and administrative usernames and passwords over SNMP. |
| CVE-2016-1557 | Netgear WNAP320, WNDAP350, and WNDAP360 before 3.5.5.0 reveal wireless passwords and administrative usernames and passwords over SNMP. |
| CVE-2016-1473 | Cisco Small Business 220 devices with firmware before 1.0.1.1 have a hardcoded SNMP community, which allows remote attackers to read or modify SNMP objects by leveraging knowledge of this community, aka Bug ID CSCuz76216. |
| CVE-2016-1452 | Cisco ASR 5000 devices with software 18.3 through 20.0.0 allow remote attackers to make configuration changes over SNMP by leveraging knowledge of the read-write community, aka Bug ID CSCuz29526. |
| CVE-2016-1432 | Cisco IOS XE 3.15S and 3.16S on cBR-8 Converged Broadband Router devices allows remote authenticated users to cause a denial of service (NULL pointer dereference and card restart) via a crafted SNMP request, aka Bug ID CSCuu68862. |
| CVE-2016-1428 | Double free vulnerability in Cisco IOS XE 3.15S, 3.16S, and 3.17S allows remote authenticated users to cause a denial of service (device restart) via a sequence of crafted SNMP read requests, aka Bug ID CSCux13174. |
| CVE-2016-1333 | Cisco IOS 15.5(3)M and 15.6(1)T0a on Cisco 1000 Connected Grid routers allows remote authenticated users to cause a denial of service (device reload) via an SNMP request for unspecified BRIDGE MIB OIDs, aka Bug ID CSCux89878. |
| CVE-2016-0862 | General Electric (GE) Industrial Solutions UPS SNMP/Web Adapter devices with firmware before 4.8 allow remote authenticated users to obtain sensitive cleartext account information via unspecified vectors. |
| CVE-2016-0861 | General Electric (GE) Industrial Solutions UPS SNMP/Web Adapter devices with firmware before 4.8 allow remote authenticated users to execute arbitrary commands via unspecified vectors. |
| CVE-2015-8100 | The net-snmp package in OpenBSD through 5.8 uses 0644 permissions for snmpd.conf, which allows local users to obtain sensitive community information by reading this file. |
| CVE-2015-7289 | Arris DG860A, TG862A, and TG862G devices with firmware TS0703128_100611 through TS0705125D_031115 have a hardcoded administrator password derived from a serial number, which makes it easier for remote attackers to obtain access via the web management interface, SSH, TELNET, or SNMP. |
| CVE-2015-6337 | Cross-site scripting (XSS) vulnerability in Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM) 1.0.10 allows remote attackers to inject arbitrary web script or HTML via a crafted hostname in an SNMP response, aka Bug ID CSCuw47238. |
| CVE-2015-6308 | Cisco NX-OS 6.0(2)U6(0.46) on N3K devices allows remote authenticated users to cause a denial of service (temporary SNMP outage) via an SNMP request for an OID that does not exist, aka Bug ID CSCuw36684. |
| CVE-2015-6260 | Cisco NX-OS 7.1(1)N1(1) on Nexus 5500, 5600, and 6000 devices does not properly validate PDUs in SNMP packets, which allows remote attackers to cause a denial of service (SNMP application restart) via a crafted packet, aka Bug ID CSCut84645. |
| CVE-2015-6035 | Opsview before 2015-11-06 has XSS via SNMP. |
| CVE-2015-6027 | Castle Rock Computing SNMPc before 2015-12-17 has XSS via SNMP. |
| CVE-2015-6021 | Spiceworks Desktop before 2015-12-01 has XSS via an SNMP response. |
| CVE-2015-6005 | Multiple cross-site scripting (XSS) vulnerabilities in IPSwitch WhatsUp Gold before 16.4 allow remote attackers to inject arbitrary web script or HTML via (1) an SNMP OID object, (2) an SNMP trap message, (3) the View Names field, (4) the Group Names field, (5) the Flow Monitor Credentials field, (6) the Flow Monitor Threshold Name field, (7) the Task Library Name field, (8) the Task Library Description field, (9) the Policy Library Name field, (10) the Policy Library Description field, (11) the Template Library Name field, (12) the Template Library Description field, (13) the System Script Library Name field, (14) the System Script Library Description field, or (15) the CLI Settings Library Description field. |
| CVE-2015-5621 | The snmp_pdu_parse function in snmp_api.c in net-snmp 5.7.2 and earlier does not remove the varBind variable in a netsnmp_variable_list item when parsing of the SNMP PDU fails, which allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a crafted packet. |
| CVE-2015-4305 | The web framework in Cisco Prime Collaboration Assurance before 10.5.1.53684-1 allows remote authenticated users to bypass intended system-database read restrictions, and discover credentials or SNMP communities for arbitrary tenant domains, via a crafted URL, aka Bug ID CSCus62656. |
| CVE-2015-4238 | The SNMP implementation in Cisco Adaptive Security Appliance (ASA) Software 8.4(7) and 8.6(1.2) allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests during a time of high network traffic, aka Bug ID CSCul02601. |
| CVE-2015-4204 | Memory leak in Cisco IOS 12.2 in the Performance Routing Engine (PRE) module on uBR10000 devices allows remote authenticated users to cause a denial of service (memory consumption or PXF process crash) by sending docsIfMCmtsMib SNMP requests quickly, aka Bug ID CSCue65051. |
| CVE-2015-0687 | The SNMP implementation in Cisco IOS 15.1(2)SG4 on Catalyst 4500 devices, when single-switch Virtual Switching System (VSS) is configured, allows remote authenticated users to cause a denial of service (device crash) by performing SNMP polling, aka Bug ID CSCuq04574. |
| CVE-2015-0686 | The SNMP implementation in Cisco NX-OS 6.1(2)I2(3) on Nexus 9000 devices, when a Reset High Availability (HA) policy is configured, allows remote authenticated users to cause a denial of service (device reload) via unspecified vectors, aka Bug ID CSCuq92240. |
| CVE-2015-0661 | The SNMPv2 implementation in Cisco IOS XR allows remote authenticated users to cause a denial of service (snmpd daemon reload) via a malformed SNMP packet, aka Bug ID CSCur25858. |
| CVE-2015-0617 | Cisco ASR 5500 System Architecture Evolution (SAE) Gateway devices allow remote attackers to cause a denial of service (CPU consumption and SNMP outage) via malformed SNMP packets, aka Bug ID CSCur13393. |
| CVE-2015-0174 | The SNMP implementation in IBM WebSphere Application Server (WAS) 8.5 before 8.5.5.5 does not properly handle configuration data, which allows remote authenticated users to obtain sensitive information via unspecified vectors. |
| CVE-2014-6270 | Off-by-one error in the snmpHandleUdp function in snmp_core.cc in Squid 2.x and 3.x, when an SNMP port is configured, allows remote attackers to cause a denial of service (crash) or possibly execute arbitrary code via a crafted UDP SNMP request, which triggers a heap-based buffer overflow. |
| CVE-2014-4863 | The Arris Touchstone DG950A cable modem with software 7.10.131 has an SNMP community of public, which allows remote attackers to obtain sensitive password, key, and SSID information via an SNMP request. |
| CVE-2014-4862 | The Netmaster CBW700N cable modem with software 81.447.392110.729.024 has an SNMP community of public, which allows remote attackers to obtain sensitive credential, key, and SSID information via an SNMP request. |
| CVE-2014-3565 | snmplib/mib.c in net-snmp 5.7.0 and earlier, when the -OQ option is used, allows remote attackers to cause a denial of service (snmptrapd crash) via a crafted SNMP trap message, which triggers a conversion to the variable type designated in the MIB file, as demonstrated by a NULL type in an ifMtu trap message. |
| CVE-2014-3377 | snmpd in Cisco IOS XR 5.1 and earlier allows remote authenticated users to cause a denial of service (process reload) via a malformed SNMPv2 packet, aka Bug ID CSCun67791. |
| CVE-2014-3341 | The SNMP module in Cisco NX-OS 7.0(3)N1(1) and earlier on Nexus 5000 and 6000 devices provides different error messages for invalid requests depending on whether the VLAN ID exists, which allows remote attackers to enumerate VLANs via a series of requests, aka Bug ID CSCup85616. |
| CVE-2014-3291 | Cisco Wireless LAN Controller (WLC) devices allow remote attackers to cause a denial of service (NULL pointer dereference and device restart) via a zero value in Cisco Discovery Protocol packet data that is not properly handled during SNMP polling, aka Bug ID CSCuo12321. |
| CVE-2014-3269 | The SNMP module in Cisco IOS XE 3.5E allows remote authenticated users to cause a denial of service (device reload) by polling frequently, aka Bug ID CSCug65204. |
| CVE-2014-2310 | The AgentX subagent in Net-SNMP before 5.4.4 allows remote attackers to cause a denial of service (hang) by sending a multi-object request with an Object ID (OID) containing more subids than previous requests, a different vulnerability than CVE-2012-6151. |
| CVE-2014-2285 | The perl_trapd_handler function in perl/TrapReceiver/TrapReceiver.xs in Net-SNMP 5.7.3.pre3 and earlier, when using certain Perl versions, allows remote attackers to cause a denial of service (snmptrapd crash) via an empty community string in an SNMP trap, which triggers a NULL pointer dereference within the newSVpv function in Perl. |
| CVE-2014-2284 | The Linux implementation of the ICMP-MIB in Net-SNMP 5.5 before 5.5.2.1, 5.6.x before 5.6.2.1, and 5.7.x before 5.7.2.1 does not properly validate input, which allows remote attackers to cause a denial of service via unspecified vectors. |
| CVE-2014-2103 | Cisco Intrusion Prevention System (IPS) Software allows remote attackers to cause a denial of service (MainApp process outage) via malformed SNMP packets, aka Bug IDs CSCum52355 and CSCul49309. |
| CVE-2014-1966 | The SNMP implementation in Siemens RuggedCom ROS before 3.11, ROS 3.11 for RS950G, ROS 3.12 before 3.12.4, and ROS 4.0 for RSG2488 allows remote attackers to cause a denial of service (device outage) via crafted packets. |
| CVE-2014-1452 | Stack-based buffer overflow in lib/snmpagent.c in bsnmpd, as used in FreeBSD 8.3 through 10.0, allows remote attackers to cause a denial of service (daemon crash) and possibly execute arbitrary code via a crafted GETBULK PDU request. |
| CVE-2014-0373 | Unspecified vulnerability in Oracle Java SE 5.0u55, 6u65, and 7u45, and OpenJDK 7, allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors related to Serviceability. NOTE: the previous information is from the January 2014 CPU. Oracle has not commented on third-party claims that the issue is related to throwing of an incorrect exception when SnmpStatusException should have been used in the SNMP implementation, which allows attackers to escape the sandbox. |
| CVE-2014-0329 | The TELNET service on the ZTE ZXV10 W300 router 2.1.0 has a hardcoded password ending with airocon for the admin account, which allows remote attackers to obtain administrative access by leveraging knowledge of the MAC address characters present at the beginning of the password. |
| CVE-2014-0328 | The thraneLINK protocol implementation on Cobham devices does not verify firmware signatures, which allows attackers to execute arbitrary code by leveraging physical access or terminal access to send an SNMP request and a TFTP response. |
| CVE-2013-6700 | The SNMP module in Cisco IOS XR allows remote attackers to cause a denial of service (process reload) via a request for an unspecified MIB, aka Bug ID CSCuh43144. |
| CVE-2013-6381 | Buffer overflow in the qeth_snmp_command function in drivers/s390/net/qeth_core_main.c in the Linux kernel through 3.12.1 allows local users to cause a denial of service or possibly have unspecified other impact via an SNMP ioctl call with a length value that is incompatible with the command-buffer size. |
| CVE-2013-6033 | Multiple cross-site scripting (XSS) vulnerabilities on Lexmark W840 through LS.HA.P252, T64x before LS.ST.P344, C935dn through LC.JO.P091, C920 through LS.TA.P152, C53x through LS.SW.P069, C52x through LS.FA.P150, E450 through LM.SZ.P124, E350 through LE.PH.P129, and E250 through LE.PM.P126 printers allow remote authenticated users to inject arbitrary web script or HTML by using (1) SNMP or (2) the Embedded Web Server (EWS) to set the (a) Contact or (b) Location field. |
| CVE-2013-5223 | Multiple cross-site scripting (XSS) vulnerabilities in D-Link DSL-2760U Gateway (Rev. E1) allow remote authenticated users to inject arbitrary web script or HTML via the (1) ntpServer1 parameter to sntpcfg.cgi, username parameter to (2) ddnsmngr.cmd or (3) todmngr.tod, (4) TodUrlAdd parameter to urlfilter.cmd, (5) appName parameter to scprttrg.cmd, (6) fltName in an add action or (7) rmLst parameter in a remove action to scoutflt.cmd, (8) groupName parameter to portmapcfg.cmd, (9) snmpRoCommunity parameter to snmpconfig.cgi, (10) fltName parameter to scinflt.cmd, (11) PolicyName in an add action or (12) rmLst parameter in a remove action to prmngr.cmd, (13) ippName parameter to ippcfg.cmd, (14) smbNetBiosName or (15) smbDirName parameter to samba.cgi, or (16) wlSsid parameter to wlcfg.wl. |
| CVE-2013-4631 | Huawei AR 150, 200, 1200, 2200, and 3200 routers, when SNMPv3 is enabled, allow remote attackers to cause a denial of service (device crash) via malformed SNMPv3 requests that leverage unspecified overflow issues. |
| CVE-2013-4630 | Stack-based buffer overflow on Huawei AR 150, 200, 1200, 2200, and 3200 routers, when SNMPv3 debugging is enabled, allows remote attackers to execute arbitrary code via malformed SNMPv3 requests. |
| CVE-2013-3634 | A vulnerability has been identified in SCALANCE X-200 switch family (incl. SIPLUS NET variants) (Versions < V5.0.0 for CVE-2013-3633 and versions < V4.5.0 for CVE-2013-3634), SCALANCE X-200IRT switch family (incl. SIPLUS NET variants) (All versions < V5.1.0). The implementation of SNMPv3 does not check the user credentials sufficiently. Therefore, an attacker is able to execute SNMP commands without correct credentials. |
| CVE-2013-3381 | Cisco Hosted Collaboration Mediation allows remote attackers to cause a denial of service (CPU consumption) via a flood of malformed UDP packets on port 162, aka Bug ID CSCug85756. |
| CVE-2013-2780 | Siemens SIMATIC S7-1200 PLCs 2.x and 3.x allow remote attackers to cause a denial of service (defect-mode transition and control outage) via crafted packets to UDP port 161 (aka the SNMP port). |
| CVE-2013-1234 | The SNMP module in Cisco IOS XR allows remote authenticated users to cause a denial of service (process restart) via crafted SNMP packets, aka Bug ID CSCue69472. |
| CVE-2013-1229 | TMSSNMPService.exe in TelePresence Manager in Cisco TelePresence Management Suite (TMS) on 64-bit platforms allows remote attackers to cause a denial of service (process crash) via SNMP traps, aka Bug ID CSCue00028. |
| CVE-2013-1217 | The generic input/output control implementation in Cisco IOS does not properly manage buffers, which allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests at the same time, aka Bug ID CSCub41105. |
| CVE-2013-1216 | Memory leak in the SNMP module in Cisco IOS XR allows remote authenticated users to cause a denial of service (memory consumption and process restart) via crafted SNMP packets, aka Bug ID CSCue31546. |
| CVE-2013-1204 | Memory leak in the SNMP process in Cisco IOS XR allows remote attackers to cause a denial of service (memory consumption or process reload) by sending many port-162 UDP packets, aka Bug ID CSCug80345. |
| CVE-2013-1180 | Buffer overflow in the SNMP implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allows remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54822. |
| CVE-2013-1179 | Multiple buffer overflows in the (1) SNMP and (2) License Manager implementations in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allow remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54830. |
| CVE-2013-1105 | Cisco Wireless LAN Controller (WLC) devices with software 7.0 before 7.0.235.3, 7.1 and 7.2 before 7.2.111.3, and 7.3 before 7.3.101.0 allow remote authenticated users to bypass wireless-management settings and read or modify the device configuration via an SNMP request, aka Bug ID CSCua60653. |
| CVE-2013-0947 | EMC RSA Authentication Manager 8.0 before P1 allows local users to discover cleartext operating-system passwords, HTTP plug-in proxy passwords, and SNMP communities by reading a (1) log file or (2) configuration file. |
| CVE-2012-6151 | Net-SNMP 5.7.1 and earlier, when AgentX is registering to handle a MIB and processing GETNEXT requests, allows remote attackers to cause a denial of service (crash or infinite loop, CPU consumption, and hang) by causing the AgentX subagent to timeout. |
| CVE-2012-5030 | Cisco IOS before 15.2(4)S6 does not initialize an unspecified variable, which might allow remote authenticated users to cause a denial of service (CPU consumption, watchdog timeout, crash) by walking specific SNMP objects. |
| CVE-2012-4964 | The Samsung printer firmware before 20121031 has a hardcoded read-write SNMP community, which makes it easier for remote attackers to obtain administrative access via an SNMP request. |
| CVE-2012-4838 | IBM Flex System Chassis Management Module (CMM) and Integrated Management Module 2 (IMM2) allow local users to obtain sensitive information about (1) local accounts, (2) SSH private keys, (3) SSL/TLS private keys, (4) SNMPv3 communities, and (5) LDAP credentials by leveraging unspecified side effects of service or maintenance activity. |
| CVE-2012-4344 | Cross-site scripting (XSS) vulnerability in Ipswitch WhatsUp Gold 15.02 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors involving the SNMP system name of the attacking host. |
| CVE-2012-3268 | Certain HP Access Controller, Fabric Module, Firewall, Router, Switch, and UTM Appliance products; certain HP 3Com Access Controller, Router, and Switch products; certain HP H3C Access Controller, Firewall, Router, Switch, and Switch and Route Processing Unit products; and certain Huawei Firewall/Gateway, Router, Switch, and Wireless products do not properly implement access control as defined in h3c-user.mib 2.0 and hh3c-user.mib 2.0, which allows remote authenticated users to discover credentials in UserInfoEntry values via an SNMP request with the read-only community. |
| CVE-2012-2974 | The web interface on the SMC SMC8024L2 switch allows remote attackers to bypass authentication and obtain administrative access via a direct request to a .html file under (1) status/, (2) system/, (3) ports/, (4) trunks/, (5) vlans/, (6) qos/, (7) rstp/, (8) dot1x/, (9) security/, (10) igmps/, or (11) snmp/. |
| CVE-2012-2627 | d4d/uploader.php in the web console in Plixer Scrutinizer (aka Dell SonicWALL Scrutinizer) before 9.5.0 allows remote attackers to create or overwrite arbitrary files in %PROGRAMFILES%\Scrutinizer\snmp\mibs\ via a multipart/form-data POST request. |
| CVE-2012-2268 | master.exe in the SNMP Master Agent in RealNetworks Helix Server and Helix Mobile Server 14.x before 14.3.x allows remote attackers to cause a denial of service (unhandled exception and daemon crash) via a crafted Open-PDU request that triggers incorrect DisplayString processing, a different vulnerability than CVE-2012-1923. |
| CVE-2012-2267 | master.exe in the SNMP Master Agent in RealNetworks Helix Server and Helix Mobile Server 14.x before 14.3.x allows remote attackers to cause a denial of service (daemon crash) by establishing and closing a port-705 TCP connection, a different vulnerability than CVE-2012-1923. |
| CVE-2012-2141 | Array index error in the handle_nsExtendOutput2Table function in agent/mibgroup/agent/extend.c in Net-SNMP 5.7.1 allows remote authenticated users to cause a denial of service (out-of-bounds read and snmpd crash) via an SNMP GET request for an entry not in the extension table. |
| CVE-2012-2002 | Open redirect vulnerability in HP SNMP Agents for Linux before 9.0.0 allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via unspecified vectors. |
| CVE-2012-2001 | Cross-site scripting (XSS) vulnerability in HP SNMP Agents for Linux before 9.0.0 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2012-1365 | Cisco Unified Computing System (UCS) 1.4 and 2.0 allows remote authenticated users to cause a denial of service (device reload) via a malformed SNMP request to a Fabric Interconnect (FI) device, aka Bug ID CSCts32463. |
| CVE-2012-1364 | Cisco Unified Computing System (UCS) 1.4 and 2.0 allows remote authenticated users to cause a denial of service (device reload) via a malformed SNMP request to a Fabric Interconnect (FI) device, aka Bug ID CSCts32452. |
| CVE-2011-4023 | Memory leak in libcmd in Cisco NX-OS 5.0 on Nexus switches allows remote authenticated users to cause a denial of service (memory consumption) via SNMP requests, aka Bug ID CSCtr65682. |
| CVE-2011-3849 | Unspecified vulnerability in dxserver before 6279 in CA Directory 8.1 and CA Directory r12 before SP7 CR1 allows remote attackers to cause a denial of service (daemon crash) via a crafted SNMP packet. |
| CVE-2011-1532 | Unspecified vulnerability in the SNMP component on the HP Photosmart D110 and B110; Photosmart Plus B210; Photosmart Premium C310, Fax All-in-One, and C510; and ENVY 100 D410 printers allows remote attackers to obtain sensitive information or modify data via vectors related to the Embedded Web Server (EWS). |
| CVE-2011-0890 | HP Discovery & Dependency Mapping Inventory (DDMI) 7.50, 7.51, 7.60, 7.61, 7.70, and 9.30 launches the Windows SNMP service with its default configuration, which allows remote attackers to obtain potentially sensitive information or have unspecified other impact by leveraging the public read community. |
| CVE-2010-4267 | Stack-based buffer overflow in the hpmud_get_pml function in io/hpmud/pml.c in Hewlett-Packard Linux Imaging and Printing (HPLIP) 1.6.7, 3.9.8, 3.10.9, and probably other versions allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a crafted SNMP response with a large length value. |
| CVE-2010-3445 | Stack consumption vulnerability in the dissect_ber_unknown function in epan/dissectors/packet-ber.c in the BER dissector in Wireshark 1.4.x before 1.4.1 and 1.2.x before 1.2.12 allows remote attackers to cause a denial of service (NULL pointer dereference and crash) via a long string in an unknown ASN.1/BER encoded packet, as demonstrated using SNMP. |
| CVE-2010-2982 | Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 allows remote attackers to discover a group password via a series of SNMP requests, as demonstrated by an SNMP walk, aka Bug ID CSCtb74037. |
| CVE-2010-2976 | The controller in Cisco Unified Wireless Network (UWN) Solution 7.x through 7.0.98.0 has (1) a default SNMP read-only community of public, (2) a default SNMP read-write community of private, and a value of "default" for the (3) SNMP v3 username, (4) SNMP v3 authentication password, and (5) SNMP v3 privacy password, which makes it easier for remote attackers to obtain access. |
| CVE-2010-2705 | Unspecified vulnerability on the HP ProCurve 1800-24G switch with software PB.03.02 and earlier, and the ProCurve 1800-8G switch with software PA.03.02 and earlier, when SNMP is enabled, allows remote attackers to obtain sensitive information via unknown vectors. |
| CVE-2010-1574 | IOS 12.2(52)SE and 12.2(52)SE1 on Cisco Industrial Ethernet (IE) 3000 series switches has (1) a community name of public for RO access and (2) a community name of private for RW access, which makes it easier for remote attackers to modify the configuration or obtain potentially sensitive information via SNMP requests, aka Bug ID CSCtf25589. |
| CVE-2009-4777 | Unspecified vulnerability in multiple versions of Hitachi JP1/Automatic Job Management System 2 - View, JP1/Integrated Management - View, and JP1/Cm2/SNMP System Observer, allows remote attackers to cause a denial of service ("abnormal" termination) via vectors related to the display of an "invalid GIF file." |
| CVE-2009-4646 | Static code injection vulnerability in the administrative web interface in Accellion Secure File Transfer Appliance allows remote authenticated administrators to inject arbitrary shell commands by appending them to a request to update the SNMP public community string. |
| CVE-2009-3849 | Multiple stack-based buffer overflows in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allow remote attackers to execute arbitrary code via (1) a long Template parameter to nnmRptConfig.exe, related to the strcat function; or (2) a long Oid parameter to snmp.exe. |
| CVE-2009-3487 | Multiple cross-site scripting (XSS) vulnerabilities in the J-Web interface in Juniper JUNOS 8.5R1.14 allow remote authenticated users to inject arbitrary web script or HTML via (1) the JEXEC_OUTID parameter in a JEXEC_MODE_RELAY_OUTPUT action to the jexec program; the (2) act, (3) refresh-time, or (4) ifid parameter to scripter.php; (5) the revision parameter in a rollback action to the configuration program; the m[] parameter to the (6) monitor, (7) manage, (8) events, (9) configuration, or (10) alarms program; (11) the m[] parameter to the default URI; (12) the m[] parameter in a browse action to the default URI; (13) the wizard-next parameter in an https action to the configuration program; or the (14) Contact Information, (15) System Description, (16) Local Engine ID, (17) System Location, or (18) System Name Override SNMP parameter, related to the configuration program. |
| CVE-2009-3486 | Multiple cross-site scripting (XSS) vulnerabilities in the J-Web interface in Juniper JUNOS 8.5R1.14 allow remote authenticated users to inject arbitrary web script or HTML via the host parameter to (1) the pinghost program, reachable through the diagnose program; or (2) the traceroute program, reachable through the diagnose program; or (3) the probe-limit parameter to the configuration program; the (4) wizard-ids or (5) pager-new-identifier parameter in a firewall-filters action to the configuration program; (6) the cos-physical-interface-name parameter in a cos-physical-interfaces-edit action to the configuration program; the (7) wizard-args or (8) wizard-ids parameter in an snmp action to the configuration program; the (9) username or (10) fullname parameter in a users action to the configuration program; or the (11) certname or (12) certbody parameter in a local-cert (aka https) action to the configuration program. |
| CVE-2009-1887 | agent/snmp_agent.c in snmpd in net-snmp 5.0.9 in Red Hat Enterprise Linux (RHEL) 3 allows remote attackers to cause a denial of service (daemon crash) via a crafted SNMP GETBULK request that triggers a divide-by-zero error. NOTE: this vulnerability exists because of an incorrect fix for CVE-2008-4309. |
| CVE-2009-1420 | Stack-based buffer overflow in rping in HP OpenView Network Node Manager (OV NNM) 7.51 and 7.53, when used with SNMP (aka HPOvNNM.HPOVSNMP) before 1.30.009 and MIB (aka HPOvNNM.HPOVMIB) before 1.30.009, allows remote attackers to execute arbitrary code or cause a denial of service via unknown vectors. |
| CVE-2009-0625 | Unspecified vulnerability in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.2) and Cisco ACE 4710 Application Control Engine Appliance before A1(8.0) allows remote attackers to cause a denial of service (device reload) via a crafted SNMPv3 packet. |
| CVE-2009-0624 | Unspecified vulnerability in the SNMPv2c implementation in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.3) and Cisco ACE 4710 Application Control Engine Appliance before A3(2.1) allows remote attackers to cause a denial of service (device reload) via a crafted SNMPv1 packet. |
| CVE-2009-0043 | The smmsnmpd service in CA Service Metric Analysis r11.0 through r11.1 SP1 and Service Level Management 3.5 does not properly restrict access, which allows remote attackers to execute arbitrary commands via unspecified vectors. |
| CVE-2008-7095 | The SNMP daemon in ArubaOS 3.3.2.6 in Aruba Mobility Controller does not restrict SNMP access, which allows remote attackers to (1) read all SNMP community strings via SNMP-COMMUNITY-MIB::snmpCommunityName (1.3.6.1.6.3.18.1.1.1.2) or SNMP-VIEW-BASED-ACM-MIB::vacmGroupName (1.3.6.1.6.3.16.1.2.1.3) with knowledge of one community string, and (2) read SNMPv3 user names via SNMP-USER-BASED-SM-MIB or SNMP-VIEW-BASED-ACM-MIB. |
| CVE-2008-6976 | MikroTik RouterOS 3.x through 3.13 and 2.x through 2.9.51 allows remote attackers to modify Network Management System (NMS) settings via a crafted SNMP set request. |
| CVE-2008-6123 | The netsnmp_udp_fmtaddr function (snmplib/snmpUDPDomain.c) in net-snmp 5.0.9 through 5.4.2.1, when using TCP wrappers for client authorization, does not properly parse hosts.allow rules, which allows remote attackers to bypass intended access restrictions and execute SNMP queries, related to "source/destination IP address confusion." |
| CVE-2008-5869 | Cross-site scripting (XSS) vulnerability in the Proxim Wireless Tsunami MP.11 2411 with firmware 3.0.3 allows remote authenticated users to inject arbitrary web script or HTML via the system.sysName.0 SNMP OID. |
| CVE-2008-5866 | The Proxim Wireless Tsunami MP.11 2411 with firmware 3.0.3 has public as its default SNMP read/write community, which makes it easier for remote attackers to obtain sensitive information or modify SNMP variables. |
| CVE-2008-5746 | Sun SNMP Management Agent (SUNWmasf) 1.4u2 through 1.5.4 allows local users to overwrite arbitrary files and gain privileges via a symlink attack on temporary files. |
| CVE-2008-4579 | The (1) fence_apc and (2) fence_apc_snmp programs, as used in (a) fence 2.02.00-r1 and possibly (b) cman, when running in verbose mode, allows local users to append to arbitrary files via a symlink attack on the apclog temporary file. |
| CVE-2008-4309 | Integer overflow in the netsnmp_create_subtree_cache function in agent/snmp_agent.c in net-snmp 5.4 before 5.4.2.1, 5.3 before 5.3.2.3, and 5.2 before 5.2.5.1 allows remote attackers to cause a denial of service (crash) via a crafted SNMP GETBULK request, which triggers a heap-based buffer overflow, related to the number of responses or repeats. |
| CVE-2008-3807 | Cisco IOS 12.2 and 12.3 on Cisco uBR10012 series devices, when linecard redundancy is configured, enables a read/write SNMP service with "private" as the community, which allows remote attackers to obtain administrative access by guessing this community and sending SNMP requests. |
| CVE-2008-3149 | The SNMP daemon in the F5 FirePass 1200 6.0.2 hotfix 3 allows remote attackers to cause a denial of service (daemon crash) by walking the hrSWInstalled OID branch in HOST-RESOURCES-MIB. |
| CVE-2008-2946 | The SNMP-DMI mapper subagent daemon (aka snmpXdmid) in Solstice Enterprise Agents in Sun Solaris 8 through 10 allows remote attackers to cause a denial of service (daemon crash) via malformed packets. |
| CVE-2008-2797 | Cross-site scripting (XSS) vulnerability in MainLayout.do in ManageEngine OpUtils 5.0 allows remote attackers to inject arbitrary web script or HTML via the hostName parameter, when viewing an SNMP graph. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2008-2292 | Buffer overflow in the __snprint_value function in snmp_get in Net-SNMP 5.1.4, 5.2.4, and 5.4.1, as used in SNMP.xs for Perl, allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a large OCTETSTRING in an attribute value pair (AVP). |
| CVE-2008-2214 | Stack-based buffer overflow in the Network Manager in Castle Rock Computing SNMPc 7.1 and earlier allows remote attackers to cause a denial of service (crash) or execute arbitrary code via a long community string in an SNMP TRAP packet. |
| CVE-2008-1746 | The SNMP Trap Agent service in Cisco Unified Communications Manager (CUCM) 4.1 before 4.1(3)SR6, 4.2 before 4.2(3)SR3, 4.3 before 4.3(2), 5.x before 5.1(3), and 6.x before 6.1(1) allows remote attackers to cause a denial of service (core dump and service restart) via a series of malformed UDP packets, as demonstrated by the IP Stack Integrity Checker (ISIC), aka Bug ID CSCsj24113. |
| CVE-2008-1673 | The asn1 implementation in (a) the Linux kernel 2.4 before 2.4.36.6 and 2.6 before 2.6.25.5, as used in the cifs and ip_nat_snmp_basic modules; and (b) the gxsnmp package; does not properly validate length values during decoding of ASN.1 BER data, which allows remote attackers to cause a denial of service (crash) or execute arbitrary code via (1) a length greater than the working buffer, which can lead to an unspecified overflow; (2) an oid length of zero, which can lead to an off-by-one error; or (3) an indefinite length for a primitive encoding. |
| CVE-2008-1528 | ZyXEL Prestige routers, including P-660, P-661, and P-662 models with firmware 3.40(AGD.2) through 3.40(AHQ.3), allow remote authenticated users to obtain authentication data by making direct HTTP requests and then reading the HTML source, as demonstrated by a request for (1) RemMagSNMP.html, which discloses SNMP communities; or (2) WLAN.html, which discloses WEP keys. |
| CVE-2008-1525 | The default SNMP configuration on ZyXEL Prestige routers, including P-660 and P-661 models with firmware 3.40(AGD.2) through 3.40(AHQ.3), has a Trusted Host value of 0.0.0.0, which allows remote attackers to send SNMP requests from any source IP address. |
| CVE-2008-1524 | The SNMP service on ZyXEL Prestige routers, including P-660 and P-661 models with firmware 3.40(AGD.2) through 3.40(AHQ.3), has "public" as its default community for both (1) read and (2) write operations, which allows remote attackers to perform administrative actions via SNMP, as demonstrated by reading the Dynamic DNS service password or inserting an XSS sequence into the system.sysName.0 variable, which is displayed on the System Status page. |
| CVE-2008-1503 | Cross-site scripting (XSS) vulnerability in the web management interface in F5 BIG-IP 9.4.3 allows remote attackers to inject arbitrary web script or HTML via (1) the name of a node object, or the (2) sysContact or (3) sysLocation SNMP configuration field, aka "Audit Log XSS." NOTE: these issues might be resultant from cross-site request forgery (CSRF) vulnerabilities. |
| CVE-2008-1402 | MG-SOFT Net Inspector 6.5.0.828 and earlier for Windows allows remote attackers to cause a (1) denial of service (exception and crash) via a UDP packet to the SNMP Trap Service (MgWTrap3.exe) or (2) denial of service (device freeze or memory consumption) via a malformed request to the Net Inspector Server (niengine). |
| CVE-2008-1320 | Multiple buffer overflows in ASG-Sentry Network Manager 7.0.0 and earlier allow remote attackers to execute arbitrary code or cause a denial of service (crash) via (1) a long request to FxIAList on TCP port 6162, or (2) an SNMP request with a long community string to FxAgent on UDP port 6161. |
| CVE-2008-1071 | The SNMP dissector in Wireshark (formerly Ethereal) 0.99.6 through 0.99.7 allows remote attackers to cause a denial of service (crash) via a malformed packet. |
| CVE-2008-0960 | SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte. |
| CVE-2008-0680 | SNMPd in MikroTik RouterOS 3.2 and earlier allows remote attackers to cause a denial of service (daemon crash) via a crafted SNMP SET request. |
| CVE-2007-5849 | Integer underflow in the asn1_get_string function in the SNMP back end (backend/snmp.c) for CUPS 1.2 through 1.3.4 allows remote attackers to execute arbitrary code via a crafted SNMP response that triggers a stack-based buffer overflow. |
| CVE-2007-5846 | The SNMP agent (snmp_agent.c) in net-snmp before 5.4.1 allows remote attackers to cause a denial of service (CPU and memory consumption) via a GETBULK request with a large max-repeaters value. |
| CVE-2007-5623 | Buffer overflow in the check_snmp function in Nagios Plugins (nagios-plugins) 1.4.10 allows remote attackers to cause a denial of service (crash) via crafted snmpget replies. |
| CVE-2007-4350 | Cross-site scripting (XSS) vulnerability in the management interface in HP SiteScope 9.0 build 911 allows remote attackers to inject arbitrary web script or HTML via an SNMP trap message. |
| CVE-2007-3776 | Cisco Unified Communications Manager (CUCM, formerly CallManager) and Unified Presence Server (CUPS) allow remote attackers to obtain sensitive information via unspecified vectors that reveal the SNMP community strings and configuration settings, aka (1) CSCsj20668 and (2) CSCsj25962. |
| CVE-2007-3574 | Multiple cross-site scripting (XSS) vulnerabilities in setup.cgi on the Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.00.06 firmware allow remote attackers to inject arbitrary web script or HTML via the (1) c4_trap_ip_, (2) devname, (3) snmp_getcomm, or (4) snmp_setcomm parameter. |
| CVE-2007-3012 | The web interface in Fujitsu-Siemens Computers PRIMERGY BX300 Switch Blade allows remote attackers to obtain sensitive information by canceling the authentication dialog when accessing a sub-page, which still displays the form field contents of the sub-page, as demonstrated using (1) config/ip_management.htm and (2) config/snmp_config.htm. |
| CVE-2007-2036 | The SNMP implementation in the Cisco Wireless LAN Controller (WLC) before 20070419 uses the default read-only community public, and the default read-write community private, which allows remote attackers to read and modify SNMP variables, aka Bug ID CSCse02384. |
| CVE-2007-1972 | ** DISPUTED ** PatrolAgent.exe in BMC Performance Manager does not require authentication for requests to modify configuration files, which allows remote attackers to execute arbitrary code via a request on TCP port 3181 for modification of the masterAgentName and masterAgentStartLine SNMP parameters. NOTE: the vendor disputes this vulnerability, stating that it does not exist when the system is properly configured. |
| CVE-2007-1413 | Buffer overflow in the snmpget function in the snmp extension in PHP 5.2.3 and earlier, including PHP 4.4.6 and probably other PHP 4 versions, allows context-dependent attackers to execute arbitrary code via a long value in the third argument (object id). |
| CVE-2007-1257 | The Network Analysis Module (NAM) in Cisco Catalyst Series 6000, 6500, and 7600 allows remote attackers to execute arbitrary commands via certain SNMP packets that are spoofed from the NAM's own IP address. |
| CVE-2007-0967 | Cisco Firewall Services Module (FWSM) 3.x before 3.1(3.1) allows remote attackers to cause a denial of service (device reboot) via malformed SNMP requests. |
| CVE-2007-0640 | Buffer overflow in ZABBIX before 1.1.5 has unknown impact and attack vectors related to "SNMP IP addresses." |
| CVE-2006-6470 | The SNMP Agent in Xerox WorkCentre and WorkCentre Pro before 12.050.03.000, 13.x before 13.050.03.000, and 14.x before 14.050.03.000 returns no error for a non-writable object, which has unknown impact and attack vectors. NOTE: due to the vagueness of the advisory, it is not clear whether this is a vulnerability, or a bug in a security feature. |
| CVE-2006-6435 | The SNMP implementation in Xerox WorkCentre and WorkCentre Pro before 12.050.03.000, 13.x before 13.050.03.000, and 14.x before 14.050.03.000 does not generate authentication failure traps, which allows remote attackers to more easily gain system access and obtain sensitive information via a brute force attack. |
| CVE-2006-6305 | Unspecified vulnerability in Net-SNMP 5.3 before 5.3.0.1, when configured using the rocommunity or rouser snmpd.conf tokens, causes Net-SNMP to grant write access to users or communities that only have read-only access. |
| CVE-2006-5583 | Buffer overflow in the SNMP Service in Microsoft Windows 2000 SP4, XP SP2, Server 2003, Server 2003 SP1, and possibly other versions allows remote attackers to execute arbitrary code via a crafted SNMP packet, aka "SNMP Memory Corruption Vulnerability." |
| CVE-2006-5382 | 3Com Switch SS3 4400 switches, firmware 5.11, 6.00 and 6.10 and earlier, allow remote attackers to read the SNMP Read-Write Community string and conduct unauthorized actions via unspecified "normally restricted management packets on the device" that cause the community string to be returned. |
| CVE-2006-4950 | Cisco IOS 12.2 through 12.4 before 20060920, as used by Cisco IAD2430, IAD2431, and IAD2432 Integrated Access Devices, the VG224 Analog Phone Gateway, and the MWR 1900 and 1941 Mobile Wireless Edge Routers, is incorrectly identified as supporting DOCSIS, which allows remote attackers to gain read-write access via a hard-coded cable-docsis community string and read or modify arbitrary SNMP variables. |
| CVE-2006-4139 | Race condition in Sun Solaris 10 allows attackers to cause a denial of service (system panic) via unspecified vectors related to ifconfig and either netstat or SNMP queries. |
| CVE-2006-2444 | The snmp_trap_decode function in the SNMP NAT helper for Linux kernel before 2.6.16.18 allows remote attackers to cause a denial of service (crash) via unspecified remote attack vectors that cause failures in snmp_trap_decode that trigger (1) frees of random memory or (2) frees of previously-freed memory (double-free) by snmp_trap_decode as well as its calling function, as demonstrated via certain test cases of the PROTOS SNMP test suite. |
| CVE-2006-0250 | Format string vulnerability in the snmp_input function in snmptrapd in CMU SNMP utilities (cmu-snmp) allows remote attackers to execute arbitrary code by sending crafted SNMP messages to UDP port 162. |
| CVE-2005-4837 | snmp_api.c in snmpd in Net-SNMP 5.2.x before 5.2.2, 5.1.x before 5.1.3, and 5.0.x before 5.0.10.2, when running in master agentx mode, allows remote attackers to cause a denial of service (crash) by causing a particular TCP disconnect, which triggers a free of an incorrect variable, a different vulnerability than CVE-2005-2177. |
| CVE-2005-3804 | Cisco IP Phone (VoIP) 7920 1.0(8) listens to UDP port 17185 to support a VxWorks debugger, which allows remote attackers to obtain sensitive information and cause a denial of service. |
| CVE-2005-3803 | Cisco IP Phone (VoIP) 7920 1.0(8) contains certain hard-coded ("fixed") public and private SNMP community strings that cannot be changed, which allows remote attackers to obtain sensitive information. |
| CVE-2005-3723 | Hitachi IP5000 VOIP WIFI Phone 1.5.6 does not allow the user to disable access to (1) SNMP or (2) TCP port 3390, which allows remote attackers to modify configuration using CVE-2005-3722, or access the Unidata Shell to obtain sensitive information or cause a denial of service. |
| CVE-2005-3722 | The SNMP v1/v2c daemon in Hitachi IP5000 VOIP WIFI Phone 1.5.6 allows remote attackers to gain read or write access to system configuration using arbitrary SNMP credentials. |
| CVE-2005-3718 | UTStarcom F1000 VOIP WIFI Phone s2.0 running VxWorks 5.5.1 with kernel WIND 2.6 does not allow users to disable access to (1) SNMP or (2) the rlogin port TCP 513, which allows remote attackers to exploit other vulnerabilities such as CVE-2005-3716, or execute arbitrary shell commands via rlogin, which does not require authentication. |
| CVE-2005-3716 | The SNMP daemon in UTStarcom F1000 VOIP WIFI Phone s2.0 running VxWorks 5.5.1 with kernel WIND 2.6 has hard-coded public credentials that cannot be changed, which allows attackers to obtain sensitive information. |
| CVE-2005-2988 | HP LaserJet 2430, and possibly other printers that use Jetdirect controls, stores information about recently printed documents without proper protection, which could allow remote attackers to obtain sensitive information via SNMP. |
| CVE-2005-2811 | Untrusted search path vulnerability in Net-SNMP 5.2.1.2 and earlier, on Gentoo Linux, installs certain Perl modules with an insecure DT_RPATH, which could allow local users to gain privileges. |
| CVE-2005-2177 | Net-SNMP 5.0.x before 5.0.10.2, 5.2.x before 5.2.1.2, and 5.1.3, when net-snmp is using stream sockets such as TCP, allows remote attackers to cause a denial of service (daemon hang and CPU consumption) via a TCP packet of length 1, which triggers an infinite loop. |
| CVE-2005-1740 | fixproc in Net-snmp 5.x before 5.2.1-r1 creates temporary files insecurely, which allows local users to modify the contents of those files to execute arbitrary commands, or overwrite arbitrary files via a symlink attack. |
| CVE-2005-1179 | Unknown vulnerability in Xerox MicroServer Web Server for various WorkCentre products including M35/M45/M55 2.028.11.000 through 2.97.20.032 and 4.84.16.000 through 4.97.20.032, Pro 35/45/55 3.028.11.000 through 3.97.20.032, Pro 65/75/90 1.001.00.060 through 1.001.02.084, and others, related to SNMP authentication, allows remote attackers to modify system configuration, a different vulnerability than CVE-2005-0703. |
| CVE-2005-0835 | The SNMP service in the Belkin 54G (F5D7130) wireless router allows remote attackers to cause a denial of service via unknown vectors. |
| CVE-2005-0834 | Belkin 54G (F5D7130) wireless router enables SNMP by default in a manner that allows remote attackers to obtain sensitive information. |
| CVE-2005-0612 | Cisco IP/VC Videoconferencing System 3510, 3520, 3525 and 3530 contain hard-coded default SNMP community strings, which allows remote attackers to gain access, cause a denial of service, and modify configuration. |
| CVE-2004-2300 | Buffer overflow in snmpd in ucd-snmp 4.2.6 and earlier, when installed setuid root, allows local users to execute arbitrary code via a long -p command line argument. NOTE: it is not clear whether there are any standard configurations in which snmpd is installed setuid or setgid. If not, then this issue should not be included in CVE. |
| CVE-2004-1776 | Cisco IOS 12.1(3) and 12.1(3)T allows remote attackers to read and modify device configuration data via the cable-docsis read-write community string used by the Data Over Cable Service Interface Specification (DOCSIS) standard. |
| CVE-2004-1775 | Cisco VACM (View-based Access Control MIB) for Catalyst Operating Software (CatOS) 5.5 and 6.1 and IOS 12.0 and 12.1 allows remote attackers to read and modify device configuration via the read-write community string. |
| CVE-2004-1474 | Symantec Enterprise Firewall/VPN Appliances 100, 200, and 200R running firmware before 1.63 and Gateway Security 320, 360, and 360R running firmware before 622 uses a default read/write SNMP community string, which allows remote attackers to alter the firewall's configuration file. |
| CVE-2004-1434 | Multiple versions of Cisco ONS 15327, ONS 15454, and ONS 15454 SDH, including 4.1(0) to 4.1(2), 4.5(x), 4.0(0) to 4.0(2), and earlier versions, allows remote attackers to cause a denial of service (control card reset) via malformed SNMP packets. |
| CVE-2004-0918 | The asn_parse_header function (asn1.c) in the SNMP module for Squid Web Proxy Cache before 2.4.STABLE7 allows remote attackers to cause a denial of service (server restart) via certain SNMP packets with negative length fields that trigger a memory allocation error. |
| CVE-2004-0849 | Integer overflow in the asn_decode_string() function defined in asn1.c in radiusd for GNU Radius 1.1 and 1.2 before 1.2.94, when compiled with the --enable-snmp option, allows remote attackers to cause a denial of service (daemon crash) via certain SNMP requests. |
| CVE-2004-0714 | Cisco Internetwork Operating System (IOS) 12.0S through 12.3T attempts to process SNMP solicited operations on improper ports (UDP 162 and a randomly chosen UDP port), which allows remote attackers to cause a denial of service (device reload and memory corruption). |
| CVE-2004-0635 | The SNMP dissector in Ethereal 0.8.15 through 0.10.4 allows remote attackers to cause a denial of service (process crash) via a (1) malformed or (2) missing community string, which causes an out-of-bounds read. |
| CVE-2004-0616 | The BT Voyager 2000 Wireless ADSL Router has a default public SNMP community name, which allows remote attackers to obtain sensitive information such as the password, which is stored in plaintext. |
| CVE-2004-0576 | The radius daemon (radiusd) for GNU Radius 1.1, when compiled with the -enable-snmp option, allows remote attackers to cause a denial of service (server crash) via malformed SNMP messages containing an invalid OID. |
| CVE-2004-0312 | Linksys WAP55AG 1.07 allows remote attackers with access to an SNMP read only community string to gain access to read/write communtiy strings via a query for OID 1.3.6.1.4.1.3955.2.1.13.1.2. |
| CVE-2004-0311 | American Power Conversion (APC) Web/SNMP Management SmartSlot Card 3.0 through 3.0.3 and 3.21 are shipped with a default password of TENmanUFactOryPOWER, which allows remote attackers to gain unauthorized access. |
| CVE-2003-1003 | Cisco PIX firewall 5.x.x, and 6.3.1 and earlier, allows remote attackers to cause a denial of service (crash and reload) via an SNMPv3 message when snmp-server is set. |
| CVE-2003-1002 | Cisco Firewall Services Module (FWSM) in Cisco Catalyst 6500 and 7600 series devices allows remote attackers to cause a denial of service (crash and reload) via an SNMPv3 message when snmp-server is set. |
| CVE-2003-0935 | Net-SNMP before 5.0.9 allows a user or community to access data in MIB objects, even if that data is not allowed to be viewed. |
| CVE-2003-0137 | SNMP daemon in the DX200 based network element for Nokia Serving GPRS support node (SGSN) allows remote attackers to read SNMP options via arbitrary community strings. |
| CVE-2002-2402 | SURECOM broadband router EP-4501 uses a default SNMP read community string of "public" and a default SNMP read/write community string of "secret," which allows remote attackers to read and modify router configuration information. |
| CVE-2002-2112 | RCA Digital Cable Modem DCM225 and DCM225E, and other modems that must conform to the Data-over-Cable Service Interface Specifications DOCSIS standard, uses the "public" community string for SNMP access, which allows remote attackers to read or write MIB information. |
| CVE-2002-2071 | Compaq Tru64 4.0 d allows remote attackers to cause a denial of service in (1) telnet, (2) FTP, (3) ypbind, (4) rpc.lockd, (5) snmp, (6) ttdbserverd, and possibly other services via a TCP SYN scan, as demonstrated using nmap. |
| CVE-2002-1936 | UTStarcom BAS 1000 3.1.10 creates several default or back door accounts and passwords, which allows remote attackers to gain access via (1) field account with a password of "*field", (2) guru account with a password of "*3noguru", (3) snmp account with a password of "snmp", or (4) dbase account with a password of "dbase". |
| CVE-2002-1811 | Belkin F5D6130 Wireless Network Access Point running firmware AP14G8 allows remote attackers to cause a denial of service (connection loss) by sending several SNMP GetNextRequest requests. |
| CVE-2002-1570 | Heap-based buffer overflow in snmpnetstat for ucd-snmp 4.2.3 and earlier, and net-snmp, allows remote attackers to execute arbitrary code via multiple getnextrequest PDU messages with conflicting ifindex variables, which cause snmpnetstat to write variable data past the end of an array. |
| CVE-2002-1555 | Cisco ONS15454 and ONS15327 running ONS before 3.4 uses a "public" SNMP community string that cannot be changed, which allows remote attackers to obtain sensitive information. |
| CVE-2002-1448 | An undocumented SNMP read/write community string ('NoGaH$@!') in Avaya P330, P130, and M770-ATM Cajun products allows remote attackers to gain administrative privileges. |
| CVE-2002-1426 | HP ProCurve Switch 4000M C.07.23 allows remote attackers to cause a denial of service (crash) via an SNMP write request containing 85 characters, possibly triggering a buffer overflow. |
| CVE-2002-1408 | Unknown vulnerability or vulnerabilities in HP OpenView EMANATE 14.2 snmpModules allow the SNMP read-write community name to be exposed, related to (1) "'read-only' community access," and/or (2) an easily guessable community name. |
| CVE-2002-1170 | The handle_var_requests function in snmp_agent.c for the SNMP daemon in the Net-SNMP (formerly ucd-snmp) package 5.0.1 through 5.0.5 allows remote attackers to cause a denial of service (crash) via a NULL dereference. |
| CVE-2002-1048 | HP JetDirect printers allow remote attackers to obtain the administrative password for the (1) web and (2) telnet services via an SNMP request to the variable (.iso.3.6.1.4.1.11.2.3.9.4.2.1.3.9.1.1.0. |
| CVE-2002-0812 | Information leak in Compaq WL310, and the Orinoco Residential Gateway access point it is based on, uses a system identification string as a default SNMP read/write community string, which allows remote attackers to obtain and modify sensitive configuration information by querying for the identification string. |
| CVE-2002-0540 | Nortel CVX 1800 is installed with a default "public" community string, which allows remote attackers to read usernames and passwords and modify the CVX configuration. |
| CVE-2002-0478 | The default configuration of Foundry Networks EdgeIron 4802F allows remote attackers to modify sensitive information via arbitrary SNMP community strings. |
| CVE-2002-0305 | Zero One Tech (ZOT) P100s print server does not properly disable the SNMP service or change the default password, which could leave the server open to attack without the administrator's knowledge. |
| CVE-2002-0302 | The Notify daemon for Symantec Enterprise Firewall (SEF) 6.5.x drops large alerts when SNMP is used as the transport, which could prevent some alerts from being sent in the event of an attack. |
| CVE-2002-0109 | Linksys EtherFast BEFN2PS4, BEFSR41, and BEFSR81 Routers, and possibly other products, allow remote attackers to gain sensitive information and cause a denial of service via an SNMP query for the default community string "public," which causes the router to change its configuration and send SNMP trap information back to the system that initiated the query. |
| CVE-2002-0069 | Memory leak in SNMP in Squid 2.4 STABLE3 and earlier allows remote attackers to cause a denial of service. |
| CVE-2002-0053 | Buffer overflow in SNMP agent service in Windows 95/98/98SE, Windows NT 4.0, Windows 2000, and Windows XP allows remote attackers to cause a denial of service or execute arbitrary code via a malformed management request. NOTE: this candidate may be split or merged with other candidates. This and other PROTOS-related candidates, especially CVE-2002-0012 and CVE-2002-0013, will be updated when more accurate information is available. |
| CVE-2002-0017 | Buffer overflow in SNMP daemon (snmpd) on SGI IRIX 6.5 through 6.5.15m allows remote attackers to execute arbitrary code via an SNMP request. |
| CVE-2002-0013 | Vulnerabilities in the SNMPv1 request handling of a large number of SNMP implementations allow remote attackers to cause a denial of service or gain privileges via (1) GetRequest, (2) GetNextRequest, and (3) SetRequest messages, as demonstrated by the PROTOS c06-SNMPv1 test suite. NOTE: It is highly likely that this candidate will be SPLIT into multiple candidates, one or more for each vendor. This and other SNMP-related candidates will be updated when more accurate information is available. |
| CVE-2002-0012 | Vulnerabilities in a large number of SNMP implementations allow remote attackers to cause a denial of service or gain privileges via SNMPv1 trap handling, as demonstrated by the PROTOS c06-SNMPv1 test suite. NOTE: It is highly likely that this candidate will be SPLIT into multiple candidates, one or more for each vendor. This and other SNMP-related candidates will be updated when more accurate information is available. |
| CVE-2001-1451 | Memory leak in the SNMP LAN Manager (LANMAN) MIB extension for Microsoft Windows 2000 before SP3, when the Print Spooler is not running, allows remote attackers to cause a denial of service (memory consumption) via a large number of GET or GETNEXT requests. |
| CVE-2001-1434 | Cisco IOS 12.0(5)XU through 12.1(2) allows remote attackers to read system administration and topology information via an "snmp-server host" command, which creates a readable "community" community string if one has not been previously created. |
| CVE-2001-1262 | Avaya Argent Office 2.1 compares a user-provided SNMP community string with the correct string only up to the length of the user-provided string, which allows remote attackers to bypass authentication with a 0 length community string. |
| CVE-2001-1221 | D-Link DWL-1000AP Firmware 3.2.28 #483 Wireless LAN Access Point uses a default SNMP community string of 'public' which allows remote attackers to gain sensitive information. |
| CVE-2001-1220 | D-Link DWL-1000AP Firmware 3.2.28 #483 Wireless LAN Access Point stores the administrative password in plaintext in the default Management Information Base (MIB), which allows remote attackers to gain administrative privileges. |
| CVE-2001-1210 | Cisco ubr900 series routers that conform to the Data-over-Cable Service Interface Specifications (DOCSIS) standard must ship without SNMP access restrictions, which can allow remote attackers to read and write information to the MIB using arbitrary community strings. |
| CVE-2001-0888 | Atmel Firmware 1.3 Wireless Access Point (WAP) allows remote attackers to cause a denial of service via a SNMP request with (1) a community string other than "public" or (2) an unknown OID, which causes the WAP to deny subsequent SNMP requests. |
| CVE-2001-0840 | Buffer overflow in Compaq Insight Manager XE 2.1b and earlier allows remote attackers to execute arbitrary code via (1) SNMP and (2) DMI. |
| CVE-2001-0711 | Cisco IOS 11.x and 12.0 with ATM support allows attackers to cause a denial of service via the undocumented Interim Local Management Interface (ILMI) SNMP community string. |
| CVE-2001-0566 | Cisco Catalyst 2900XL switch allows a remote attacker to create a denial of service via an empty UDP packet sent to port 161 (SNMP) when SNMP is disabled. |
| CVE-2001-0564 | APC Web/SNMP Management Card prior to Firmware 310 only supports one telnet connection, which allows a remote attacker to create a denial of service via repeated failed logon attempts which temporarily locks the card. |
| CVE-2001-0552 | ovactiond in HP OpenView Network Node Manager (NNM) 6.1 and Tivoli Netview 5.x and 6.x allows remote attackers to execute arbitrary commands via shell metacharacters in a certain SNMP trap message. |
| CVE-2001-0514 | SNMP service in Atmel 802.11b VNET-B Access Point 1.3 and earlier, as used in Netgear ME102 and Linksys WAP11, accepts arbitrary community strings with requested MIB modifications, which allows remote attackers to obtain sensitive information such as WEP keys, cause a denial of service, or gain access to the network. |
| CVE-2001-0487 | AIX SNMP server snmpd allows remote attackers to cause a denial of service via a RST during the TCP connection. |
| CVE-2001-0470 | Buffer overflow in SNMP proxy agent snmpd in Solaris 8 may allow local users to gain root privileges by calling snmpd with a long program name. |
| CVE-2001-0380 | Crosscom/Olicom XLT-F running XL 80 IM Version 5.5 Build Level 2 allows a remote attacker SNMP read and write access via a default, undocumented community string 'ILMI'. |
| CVE-2001-0352 | SNMP agents in 3Com AirConnect AP-4111 and Symbol 41X1 Access Point allow remote attackers to obtain the WEP encryption key by reading it from a MIB when the value should be write-only, via (1) dot11WEPDefaultKeyValue in the dot11WEPDefaultKeysTable of the IEEE 802.11b MIB, or (2) ap128bWepKeyValue in the ap128bWEPKeyTable in the Symbol MIB. |
| CVE-2001-0236 | Buffer overflow in Solaris snmpXdmid SNMP to DMI mapper daemon allows remote attackers to execute arbitrary commands via a long "indication" event. |
| CVE-2001-0046 | The default permissions for the SNMP Parameters registry key in Windows NT 4.0 allows remote attackers to read and possibly modify the SNMP community strings to obtain sensitive information or modify network configuration, aka one of the "Registry Permissions" vulnerabilities. |
| CVE-2000-1192 | Buffer overflow in BTT Software SNMP Trap Watcher 1.16 allows remote attackers to cause a denial of service, and possibly execute arbitrary commands, via a long string trap. |
| CVE-2000-1157 | Buffer overflow in NAI Sniffer Agent allows remote attackers to execute arbitrary commands via a long SNMP community name. |
| CVE-2000-1058 | Buffer overflow in OverView5 CGI program in HP OpenView Network Node Manager (NNM) 6.1 and earlier allows remote attackers to cause a denial of service, and possibly execute arbitrary commands, in the SNMP service (snmp.exe), aka the "Java SNMP MIB Browser Object ID parsing problem." |
| CVE-2000-0955 | Cisco Virtual Central Office 4000 (VCO/4K) uses weak encryption to store usernames and passwords in the SNMP MIB, which allows an attacker who knows the community name to crack the password and gain privileges. |
| CVE-2000-0885 | Buffer overflows in Microsoft Network Monitor (Netmon) allow remote attackers to execute arbitrary commands via a long Browser Name in a CIFS Browse Frame, a long SNMP community name, or a long username or filename in an SMB session, aka the "Netmon Protocol Parsing" vulnerability. NOTE: It is highly likely that this candidate will be split into multiple candidates. |
| CVE-2000-0515 | The snmpd.conf configuration file for the SNMP daemon (snmpd) in HP-UX 11.0 is world writable, which allows local users to modify SNMP configuration or gain privileges. |
| CVE-2000-0379 | The Netopia R9100 router does not prevent authenticated users from modifying SNMP tables, even if the administrator has configured it to do so. |
| CVE-2000-0221 | The Nautica Marlin bridge allows remote attackers to cause a denial of service via a zero length UDP packet to the SNMP port. |
| CVE-2000-0147 | snmpd in SCO OpenServer has an SNMP community string that is writable by default, which allows local attackers to modify the host's configuration. |
| CVE-1999-1581 | Memory leak in Simple Network Management Protocol (SNMP) agent (snmp.exe) for Windows NT 4.0 before Service Pack 4 allows remote attackers to cause a denial of service (memory consumption) via a large number of SNMP packets with Object Identifiers (OIDs) that cannot be decoded. |
| CVE-1999-1513 | Management information base (MIB) for a 3Com SuperStack II hub running software version 2.10 contains an object identifier (.1.3.6.1.4.1.43.10.4.2) that is accessible by a read-only community string, but lists the entire table of community strings, which could allow attackers to conduct unauthorized activities. |
| CVE-1999-1460 | BMC PATROL SNMP Agent before 3.2.07 allows local users to create arbitrary world-writeable files as root by specifying the target file as the second argument to the snmpmagt program. |
| CVE-1999-1335 | snmpd server in cmu-snmp SNMP package before 3.3-1 in Red Hat Linux 4.0 is configured to allow remote attackers to read and write sensitive information. |
| CVE-1999-1245 | vacm ucd-snmp SNMP server, version 3.52, does not properly disable access to the public community string, which could allow remote attackers to obtain sensitive information. |
| CVE-1999-1126 | Cisco Resource Manager (CRM) 1.1 and earlier creates certain files with insecure permissions that allow local users to obtain sensitive configuration information including usernames, passwords, and SNMP community strings, from (1) swim_swd.log, (2) swim_debug.log, (3) dbi_debug.log, and (4) temporary files whose names begin with "DPR_". |
| CVE-1999-1042 | Cisco Resource Manager (CRM) 1.0 and 1.1 creates world-readable log files and temporary files, which may expose sensitive information, to local users such as user IDs, passwords and SNMP community strings. |
| CVE-1999-0815 | Memory leak in SNMP agent in Windows NT 4.0 before SP5 allows remote attackers to conduct a denial of service (memory exhaustion) via a large number of queries. |
| CVE-1999-0792 | ROUTERmate has a default SNMP community name which allows remote attackers to modify its configuration. |
| CVE-1999-0615 | ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: None. Reason: this candidate is solely about a configuration that does not directly introduce security vulnerabilities, so it is more appropriate to cover under the Common Configuration Enumeration (CCE). Notes: the former description is: "The SNMP service is running." |
| CVE-1999-0517 | An SNMP community name is the default (e.g. public), null, or missing. |
| CVE-1999-0516 | An SNMP community name is guessable. |
| CVE-1999-0499 | NETBIOS share information may be published through SNMP registry keys in NT. |
| CVE-1999-0472 | The SNMP default community name "public" is not properly removed in NetApps C630 Netcache, even if the administrator tries to disable it. |
| CVE-1999-0294 | All records in a WINS database can be deleted through SNMP for a denial of service. |
| CVE-1999-0254 | A hidden SNMP community string in HP OpenView allows remote attackers to modify MIB tables and obtain sensitive information. |
| CVE-1999-0186 | In Solaris, an SNMP subagent has a default community string that allows remote attackers to execute arbitrary commands as root, or modify system parameters. |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
