Search Results
There are 55 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2024-26850 | In the Linux kernel, the following vulnerability has been resolved: mm/debug_vm_pgtable: fix BUG_ON with pud advanced test Architectures like powerpc add debug checks to ensure we find only devmap PUD pte entries. These debug checks are only done with CONFIG_DEBUG_VM. This patch marks the ptes used for PUD advanced test devmap pte entries so that we don't hit on debug checks on architecture like ppc64 as below. WARNING: CPU: 2 PID: 1 at arch/powerpc/mm/book3s64/radix_pgtable.c:1382 radix__pud_hugepage_update+0x38/0x138 .... NIP [c0000000000a7004] radix__pud_hugepage_update+0x38/0x138 LR [c0000000000a77a8] radix__pudp_huge_get_and_clear+0x28/0x60 Call Trace: [c000000004a2f950] [c000000004a2f9a0] 0xc000000004a2f9a0 (unreliable) [c000000004a2f980] [000d34c100000000] 0xd34c100000000 [c000000004a2f9a0] [c00000000206ba98] pud_advanced_tests+0x118/0x334 [c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48 [c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388 Also kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:202! .... NIP [c000000000096510] pudp_huge_get_and_clear_full+0x98/0x174 LR [c00000000206bb34] pud_advanced_tests+0x1b4/0x334 Call Trace: [c000000004a2f950] [000d34c100000000] 0xd34c100000000 (unreliable) [c000000004a2f9a0] [c00000000206bb34] pud_advanced_tests+0x1b4/0x334 [c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48 [c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388 |
| CVE-2024-26847 | In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas: use correct function name for resetting TCE tables The PAPR spec spells the function name as "ibm,reset-pe-dma-windows" but in practice firmware uses the singular form: "ibm,reset-pe-dma-window" in the device tree. Since we have the wrong spelling in the RTAS function table, reverse lookups (token -> name) fail and warn: unexpected failed lookup for token 86 WARNING: CPU: 1 PID: 545 at arch/powerpc/kernel/rtas.c:659 __do_enter_rtas_trace+0x2a4/0x2b4 CPU: 1 PID: 545 Comm: systemd-udevd Not tainted 6.8.0-rc4 #30 Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NL1060_028) hv:phyp pSeries NIP [c0000000000417f0] __do_enter_rtas_trace+0x2a4/0x2b4 LR [c0000000000417ec] __do_enter_rtas_trace+0x2a0/0x2b4 Call Trace: __do_enter_rtas_trace+0x2a0/0x2b4 (unreliable) rtas_call+0x1f8/0x3e0 enable_ddw.constprop.0+0x4d0/0xc84 dma_iommu_dma_supported+0xe8/0x24c dma_set_mask+0x5c/0xd8 mlx5_pci_init.constprop.0+0xf0/0x46c [mlx5_core] probe_one+0xfc/0x32c [mlx5_core] local_pci_probe+0x68/0x12c pci_call_probe+0x68/0x1ec pci_device_probe+0xbc/0x1a8 really_probe+0x104/0x570 __driver_probe_device+0xb8/0x224 driver_probe_device+0x54/0x130 __driver_attach+0x158/0x2b0 bus_for_each_dev+0xa8/0x120 driver_attach+0x34/0x48 bus_add_driver+0x174/0x304 driver_register+0x8c/0x1c4 __pci_register_driver+0x68/0x7c mlx5_init+0xb8/0x118 [mlx5_core] do_one_initcall+0x60/0x388 do_init_module+0x7c/0x2a4 init_module_from_file+0xb4/0x108 idempotent_init_module+0x184/0x34c sys_finit_module+0x90/0x114 And oopses are possible when lockdep is enabled or the RTAS tracepoints are active, since those paths dereference the result of the lookup. Use the correct spelling to match firmware's behavior, adjusting the related constants to match. |
| CVE-2024-26745 | In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV When kdump kernel tries to copy dump data over SR-IOV, LPAR panics due to NULL pointer exception: Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc000000020847ad4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: mlx5_core(+) vmx_crypto pseries_wdt papr_scm libnvdimm mlxfw tls psample sunrpc fuse overlay squashfs loop CPU: 12 PID: 315 Comm: systemd-udevd Not tainted 6.4.0-Test102+ #12 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c000000020847ad4 LR: c00000002083b2dc CTR: 00000000006cd18c REGS: c000000029162ca0 TRAP: 0300 Not tainted (6.4.0-Test102+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48288244 XER: 00000008 CFAR: c00000002083b2d8 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1 ... NIP _find_next_zero_bit+0x24/0x110 LR bitmap_find_next_zero_area_off+0x5c/0xe0 Call Trace: dev_printk_emit+0x38/0x48 (unreliable) iommu_area_alloc+0xc4/0x180 iommu_range_alloc+0x1e8/0x580 iommu_alloc+0x60/0x130 iommu_alloc_coherent+0x158/0x2b0 dma_iommu_alloc_coherent+0x3c/0x50 dma_alloc_attrs+0x170/0x1f0 mlx5_cmd_init+0xc0/0x760 [mlx5_core] mlx5_function_setup+0xf0/0x510 [mlx5_core] mlx5_init_one+0x84/0x210 [mlx5_core] probe_one+0x118/0x2c0 [mlx5_core] local_pci_probe+0x68/0x110 pci_call_probe+0x68/0x200 pci_device_probe+0xbc/0x1a0 really_probe+0x104/0x540 __driver_probe_device+0xb4/0x230 driver_probe_device+0x54/0x130 __driver_attach+0x158/0x2b0 bus_for_each_dev+0xa8/0x130 driver_attach+0x34/0x50 bus_add_driver+0x16c/0x300 driver_register+0xa4/0x1b0 __pci_register_driver+0x68/0x80 mlx5_init+0xb8/0x100 [mlx5_core] do_one_initcall+0x60/0x300 do_init_module+0x7c/0x2b0 At the time of LPAR dump, before kexec hands over control to kdump kernel, DDWs (Dynamic DMA Windows) are scanned and added to the FDT. For the SR-IOV case, default DMA window "ibm,dma-window" is removed from the FDT and DDW added, for the device. Now, kexec hands over control to the kdump kernel. When the kdump kernel initializes, PCI busses are scanned and IOMMU group/tables created, in pci_dma_bus_setup_pSeriesLP(). For the SR-IOV case, there is no "ibm,dma-window". The original commit: b1fc44eaa9ba, fixes the path where memory is pre-mapped (direct mapped) to the DDW. When TCEs are direct mapped, there is no need to initialize IOMMU tables. iommu_table_setparms_lpar() only considers "ibm,dma-window" property when initiallizing IOMMU table. In the scenario where TCEs are dynamically allocated for SR-IOV, newly created IOMMU table is not initialized. Later, when the device driver tries to enter TCEs for the SR-IOV device, NULL pointer execption is thrown from iommu_area_alloc(). The fix is to initialize the IOMMU table with DDW property stored in the FDT. There are 2 points to remember: 1. For the dedicated adapter, kdump kernel would encounter both default and DDW in FDT. In this case, DDW property is used to initialize the IOMMU table. 2. A DDW could be direct or dynamic mapped. kdump kernel would initialize IOMMU table and mark the existing DDW as "dynamic". This works fine since, at the time of table initialization, iommu_table_clear() makes some space in the DDW, for some predefined number of TCEs which are needed for kdump to succeed. |
| CVE-2024-26738 | In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller When a PCI device is dynamically added, the kernel oopses with a NULL pointer dereference: BUG: Kernel NULL pointer dereference on read at 0x00000030 Faulting instruction address: 0xc0000000006bbe5c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8 REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006 CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0 ... NIP sysfs_add_link_to_group+0x34/0x94 LR iommu_device_link+0x5c/0x118 Call Trace: iommu_init_device+0x26c/0x318 (unreliable) iommu_device_link+0x5c/0x118 iommu_init_device+0xa8/0x318 iommu_probe_device+0xc0/0x134 iommu_bus_notifier+0x44/0x104 notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 bus_notify+0x50/0x7c device_add+0x640/0x918 pci_device_add+0x23c/0x298 of_create_pci_dev+0x400/0x884 of_scan_pci_dev+0x124/0x1b0 __of_scan_bus+0x78/0x18c pcibios_scan_phb+0x2a4/0x3b0 init_phb_dynamic+0xb8/0x110 dlpar_add_slot+0x170/0x3b8 [rpadlpar_io] add_slot_store.part.0+0xb4/0x130 [rpadlpar_io] kobj_attr_store+0x2c/0x48 sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x350/0x4a0 ksys_write+0x84/0x140 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec Commit a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") broke DLPAR add of PCI devices. The above added iommu_device structure to pci_controller. During system boot, PCI devices are discovered and this newly added iommu_device structure is initialized by a call to iommu_device_register(). During DLPAR add of a PCI device, a new pci_controller structure is allocated but there are no calls made to iommu_device_register() interface. Fix is to register the iommu device during DLPAR add as well. |
| CVE-2024-26713 | In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add When a PCI device is dynamically added, the kernel oopses with a NULL pointer dereference: BUG: Kernel NULL pointer dereference on read at 0x00000030 Faulting instruction address: 0xc0000000006bbe5c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8 REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006 CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0 ... NIP sysfs_add_link_to_group+0x34/0x94 LR iommu_device_link+0x5c/0x118 Call Trace: iommu_init_device+0x26c/0x318 (unreliable) iommu_device_link+0x5c/0x118 iommu_init_device+0xa8/0x318 iommu_probe_device+0xc0/0x134 iommu_bus_notifier+0x44/0x104 notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 bus_notify+0x50/0x7c device_add+0x640/0x918 pci_device_add+0x23c/0x298 of_create_pci_dev+0x400/0x884 of_scan_pci_dev+0x124/0x1b0 __of_scan_bus+0x78/0x18c pcibios_scan_phb+0x2a4/0x3b0 init_phb_dynamic+0xb8/0x110 dlpar_add_slot+0x170/0x3b8 [rpadlpar_io] add_slot_store.part.0+0xb4/0x130 [rpadlpar_io] kobj_attr_store+0x2c/0x48 sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x350/0x4a0 ksys_write+0x84/0x140 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec Commit a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") broke DLPAR add of PCI devices. The above added iommu_device structure to pci_controller. During system boot, PCI devices are discovered and this newly added iommu_device structure is initialized by a call to iommu_device_register(). During DLPAR add of a PCI device, a new pci_controller structure is allocated but there are no calls made to iommu_device_register() interface. Fix is to register the iommu device during DLPAR add as well. [mpe: Trim oops and tweak some change log wording] |
| CVE-2024-26712 | In the Linux kernel, the following vulnerability has been resolved: powerpc/kasan: Fix addr error caused by page alignment In kasan_init_region, when k_start is not page aligned, at the begin of for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then `va = block + k_cur - k_start` is less than block, the addr va is invalid, because the memory address space from va to block is not alloced by memblock_alloc, which will not be reserved by memblock_reserve later, it will be used by other places. As a result, memory overwriting occurs. for example: int __init __weak kasan_init_region(void *start, size_t size) { [...] /* if say block(dcd97000) k_start(feef7400) k_end(feeff3fe) */ block = memblock_alloc(k_end - k_start, PAGE_SIZE); [...] for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) { /* at the begin of for loop * block(dcd97000) va(dcd96c00) k_cur(feef7000) k_start(feef7400) * va(dcd96c00) is less than block(dcd97000), va is invalid */ void *va = block + k_cur - k_start; [...] } [...] } Therefore, page alignment is performed on k_start before memblock_alloc() to ensure the validity of the VA address. |
| CVE-2024-26710 | In the Linux kernel, the following vulnerability has been resolved: powerpc/kasan: Limit KASAN thread size increase to 32KB KASAN is seen to increase stack usage, to the point that it was reported to lead to stack overflow on some 32-bit machines (see link). To avoid overflows the stack size was doubled for KASAN builds in commit 3e8635fb2e07 ("powerpc/kasan: Force thread size increase with KASAN"). However with a 32KB stack size to begin with, the doubling leads to a 64KB stack, which causes build errors: arch/powerpc/kernel/switch.S:249: Error: operand out of range (0x000000000000fe50 is not between 0xffffffffffff8000 and 0x0000000000007fff) Although the asm could be reworked, in practice a 32KB stack seems sufficient even for KASAN builds - the additional usage seems to be in the 2-3KB range for a 64-bit KASAN build. So only increase the stack for KASAN if the stack size is < 32KB. |
| CVE-2024-26709 | In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach The function spapr_tce_platform_iommu_attach_dev() is missing to call iommu_group_put() when the domain is already set. This refcount leak shows up with BUG_ON() during DLPAR remove operation as: KernelBug: Kernel bug in state 'None': kernel BUG at arch/powerpc/platforms/pseries/iommu.c:100! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=8192 NUMA pSeries <snip> Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_016) hv:phyp pSeries NIP: c0000000000ff4d4 LR: c0000000000ff4cc CTR: 0000000000000000 REGS: c0000013aed5f840 TRAP: 0700 Tainted: G I (6.8.0-rc3-autotest-g99bd3cb0d12e) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 44002402 XER: 20040000 CFAR: c000000000a0d170 IRQMASK: 0 ... NIP iommu_reconfig_notifier+0x94/0x200 LR iommu_reconfig_notifier+0x8c/0x200 Call Trace: iommu_reconfig_notifier+0x8c/0x200 (unreliable) notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 of_reconfig_notify+0x44/0xdc of_detach_node+0x78/0xb0 ofdt_write.part.0+0x86c/0xbb8 proc_reg_write+0xf4/0x150 vfs_write+0xf8/0x488 ksys_write+0x84/0x140 system_call_exception+0x138/0x330 system_call_vectored_common+0x15c/0x2ec The patch adds the missing iommu_group_put() call. |
| CVE-2023-6129 | Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications running on PowerPC CPU based platforms if the CPU provides vector instructions. Impact summary: If an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL for PowerPC CPUs restores the contents of vector registers in a different order than they are saved. Thus the contents of some of these vector registers are corrupted when returning to the caller. The vulnerable code is used only on newer PowerPC processors supporting the PowerISA 2.07 instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However unless the compiler uses the vector registers for storing pointers, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3. If this cipher is enabled on the server a malicious client can influence whether this AEAD cipher is used. This implies that TLS server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. |
| CVE-2023-52607 | In the Linux kernel, the following vulnerability has been resolved: powerpc/mm: Fix null-pointer dereference in pgtable_cache_add kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. |
| CVE-2023-52606 | In the Linux kernel, the following vulnerability has been resolved: powerpc/lib: Validate size for vector operations Some of the fp/vmx code in sstep.c assume a certain maximum size for the instructions being emulated. The size of those operations however is determined separately in analyse_instr(). Add a check to validate the assumption on the maximum size of the operations, so as to prevent any unintended kernel stack corruption. |
| CVE-2023-52499 | In the Linux kernel, the following vulnerability has been resolved: powerpc/47x: Fix 47x syscall return crash Eddie reported that newer kernels were crashing during boot on his 476 FSP2 system: kernel tried to execute user page (b7ee2000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xb7ee2000 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K FSP-2 Modules linked in: CPU: 0 PID: 61 Comm: mount Not tainted 6.1.55-d23900f.ppcnf-fsp2 #1 Hardware name: ibm,fsp2 476fpe 0x7ff520c0 FSP-2 NIP: b7ee2000 LR: 8c008000 CTR: 00000000 REGS: bffebd83 TRAP: 0400 Not tainted (6.1.55-d23900f.ppcnf-fs p2) MSR: 00000030 <IR,DR> CR: 00001000 XER: 20000000 GPR00: c00110ac bffebe63 bffebe7e bffebe88 8c008000 00001000 00000d12 b7ee2000 GPR08: 00000033 00000000 00000000 c139df10 48224824 1016c314 10160000 00000000 GPR16: 10160000 10160000 00000008 00000000 10160000 00000000 10160000 1017f5b0 GPR24: 1017fa50 1017f4f0 1017fa50 1017f740 1017f630 00000000 00000000 1017f4f0 NIP [b7ee2000] 0xb7ee2000 LR [8c008000] 0x8c008000 Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- The problem is in ret_from_syscall where the check for icache_44x_need_flush is done. When the flush is needed the code jumps out-of-line to do the flush, and then intends to jump back to continue the syscall return. However the branch back to label 1b doesn't return to the correct location, instead branching back just prior to the return to userspace, causing bogus register values to be used by the rfi. The breakage was introduced by commit 6f76a01173cc ("powerpc/syscall: implement system call entry/exit logic in C for PPC32") which inadvertently removed the "1" label and reused it elsewhere. Fix it by adding named local labels in the correct locations. Note that the return label needs to be outside the ifdef so that CONFIG_PPC_47x=n compiles. |
| CVE-2023-52451 | In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/memhp: Fix access beyond end of drmem array dlpar_memory_remove_by_index() may access beyond the bounds of the drmem lmb array when the LMB lookup fails to match an entry with the given DRC index. When the search fails, the cursor is left pointing to &drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the last valid entry in the array. The debug message at the end of the function then dereferences this pointer: pr_debug("Failed to hot-remove memory at %llx\n", lmb->base_addr); This was found by inspection and confirmed with KASAN: pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234 ================================================================== BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658 Read of size 8 at addr c000000364e97fd0 by task bash/949 dump_stack_lvl+0xa4/0xfc (unreliable) print_report+0x214/0x63c kasan_report+0x140/0x2e0 __asan_load8+0xa8/0xe0 dlpar_memory+0x298/0x1658 handle_dlpar_errorlog+0x130/0x1d0 dlpar_store+0x18c/0x3e0 kobj_attr_store+0x68/0xa0 sysfs_kf_write+0xc4/0x110 kernfs_fop_write_iter+0x26c/0x390 vfs_write+0x2d4/0x4e0 ksys_write+0xac/0x1a0 system_call_exception+0x268/0x530 system_call_vectored_common+0x15c/0x2ec Allocated by task 1: kasan_save_stack+0x48/0x80 kasan_set_track+0x34/0x50 kasan_save_alloc_info+0x34/0x50 __kasan_kmalloc+0xd0/0x120 __kmalloc+0x8c/0x320 kmalloc_array.constprop.0+0x48/0x5c drmem_init+0x2a0/0x41c do_one_initcall+0xe0/0x5c0 kernel_init_freeable+0x4ec/0x5a0 kernel_init+0x30/0x1e0 ret_from_kernel_user_thread+0x14/0x1c The buggy address belongs to the object at c000000364e80000 which belongs to the cache kmalloc-128k of size 131072 The buggy address is located 0 bytes to the right of allocated 98256-byte region [c000000364e80000, c000000364e97fd0) ================================================================== pseries-hotplug-mem: Failed to hot-remove memory at 0 Log failed lookups with a separate message and dereference the cursor only when it points to a valid entry. |
| CVE-2022-32981 | An issue was discovered in the Linux kernel through 5.18.3 on powerpc 32-bit platforms. There is a buffer overflow in ptrace PEEKUSER and POKEUSER (aka PEEKUSR and POKEUSR) when accessing floating point registers. |
| CVE-2021-47034 | In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix pte update for kernel memory on radix When adding a PTE a ptesync is needed to order the update of the PTE with subsequent accesses otherwise a spurious fault may be raised. radix__set_pte_at() does not do this for performance gains. For non-kernel memory this is not an issue as any faults of this kind are corrected by the page fault handler. For kernel memory these faults are not handled. The current solution is that there is a ptesync in flush_cache_vmap() which should be called when mapping from the vmalloc region. However, map_kernel_page() does not call flush_cache_vmap(). This is troublesome in particular for code patching with Strict RWX on radix. In do_patch_instruction() the page frame that contains the instruction to be patched is mapped and then immediately patched. With no ordering or synchronization between setting up the PTE and writing to the page it is possible for faults. As the code patching is done using __put_user_asm_goto() the resulting fault is obscured - but using a normal store instead it can be seen: BUG: Unable to handle kernel data access on write at 0xc008000008f24a3c Faulting instruction address: 0xc00000000008bd74 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: nop_module(PO+) [last unloaded: nop_module] CPU: 4 PID: 757 Comm: sh Tainted: P O 5.10.0-rc5-01361-ge3c1b78c8440-dirty #43 NIP: c00000000008bd74 LR: c00000000008bd50 CTR: c000000000025810 REGS: c000000016f634a0 TRAP: 0300 Tainted: P O (5.10.0-rc5-01361-ge3c1b78c8440-dirty) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44002884 XER: 00000000 CFAR: c00000000007c68c DAR: c008000008f24a3c DSISR: 42000000 IRQMASK: 1 This results in the kind of issue reported here: https://lore.kernel.org/linuxppc-dev/15AC5B0E-A221-4B8C-9039-FA96B8EF7C88@lca.pw/ Chris Riedl suggested a reliable way to reproduce the issue: $ mount -t debugfs none /sys/kernel/debug $ (while true; do echo function > /sys/kernel/debug/tracing/current_tracer ; echo nop > /sys/kernel/debug/tracing/current_tracer ; done) & Turning ftrace on and off does a large amount of code patching which in usually less then 5min will crash giving a trace like: ftrace-powerpc: (____ptrval____): replaced (4b473b11) != old (60000000) ------------[ ftrace bug ]------------ ftrace failed to modify [<c000000000bf8e5c>] napi_busy_loop+0xc/0x390 actual: 11:3b:47:4b Setting ftrace call site to call ftrace function ftrace record flags: 80000001 (1) expected tramp: c00000000006c96c ------------[ cut here ]------------ WARNING: CPU: 4 PID: 809 at kernel/trace/ftrace.c:2065 ftrace_bug+0x28c/0x2e8 Modules linked in: nop_module(PO-) [last unloaded: nop_module] CPU: 4 PID: 809 Comm: sh Tainted: P O 5.10.0-rc5-01360-gf878ccaf250a #1 NIP: c00000000024f334 LR: c00000000024f330 CTR: c0000000001a5af0 REGS: c000000004c8b760 TRAP: 0700 Tainted: P O (5.10.0-rc5-01360-gf878ccaf250a) MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28008848 XER: 20040000 CFAR: c0000000001a9c98 IRQMASK: 0 GPR00: c00000000024f330 c000000004c8b9f0 c000000002770600 0000000000000022 GPR04: 00000000ffff7fff c000000004c8b6d0 0000000000000027 c0000007fe9bcdd8 GPR08: 0000000000000023 ffffffffffffffd8 0000000000000027 c000000002613118 GPR12: 0000000000008000 c0000007fffdca00 0000000000000000 0000000000000000 GPR16: 0000000023ec37c5 0000000000000000 0000000000000000 0000000000000008 GPR20: c000000004c8bc90 c0000000027a2d20 c000000004c8bcd0 c000000002612fe8 GPR24: 0000000000000038 0000000000000030 0000000000000028 0000000000000020 GPR28: c000000000ff1b68 c000000000bf8e5c c00000000312f700 c000000000fbb9b0 NIP ftrace_bug+0x28c/0x2e8 LR ftrace_bug+0x288/0x2e8 Call T ---truncated--- |
| CVE-2021-47018 | In the Linux kernel, the following vulnerability has been resolved: powerpc/64: Fix the definition of the fixmap area At the time being, the fixmap area is defined at the top of the address space or just below KASAN. This definition is not valid for PPC64. For PPC64, use the top of the I/O space. Because of circular dependencies, it is not possible to include asm/fixmap.h in asm/book3s/64/pgtable.h , so define a fixed size AREA at the top of the I/O space for fixmap and ensure during build that the size is big enough. |
| CVE-2021-46990 | In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix crashes when toggling entry flush barrier The entry flush mitigation can be enabled/disabled at runtime via a debugfs file (entry_flush), which causes the kernel to patch itself to enable/disable the relevant mitigations. However depending on which mitigation we're using, it may not be safe to do that patching while other CPUs are active. For example the following crash: sleeper[15639]: segfault (11) at c000000000004c20 nip c000000000004c20 lr c000000000004c20 Shows that we returned to userspace with a corrupted LR that points into the kernel, due to executing the partially patched call to the fallback entry flush (ie. we missed the LR restore). Fix it by doing the patching under stop machine. The CPUs that aren't doing the patching will be spinning in the core of the stop machine logic. That is currently sufficient for our purposes, because none of the patching we do is to that code or anywhere in the vicinity. |
| CVE-2021-43056 | An issue was discovered in the Linux kernel for powerpc before 5.14.15. It allows a malicious KVM guest to crash the host, when the host is running on Power8, due to an arch/powerpc/kvm/book3s_hv_rmhandlers.S implementation bug in the handling of the SRR1 register values. |
| CVE-2021-38200 | arch/powerpc/perf/core-book3s.c in the Linux kernel before 5.12.13, on systems with perf_event_paranoid=-1 and no specific PMU driver support registered, allows local users to cause a denial of service (perf_instruction_pointer NULL pointer dereference and OOPS) via a "perf record" command. |
| CVE-2021-37576 | arch/powerpc/kvm/book3s_rtas.c in the Linux kernel through 5.13.5 on the powerpc platform allows KVM guest OS users to cause host OS memory corruption via rtas_args.nargs, aka CID-f62f3c20647e. |
| CVE-2020-27777 | A flaw was found in the way RTAS handled memory accesses in userspace to kernel communication. On a locked down (usually due to Secure Boot) guest system running on top of PowerVM or KVM hypervisors (pseries platform) a root like local user could use this flaw to further increase their privileges to that of a running kernel. |
| CVE-2020-1751 | An out-of-bounds write vulnerability was found in glibc before 2.31 when handling signal trampolines on PowerPC. Specifically, the backtrace function did not properly check the array bounds when storing the frame address, resulting in a denial of service or potential code execution. The highest threat from this vulnerability is to system availability. |
| CVE-2020-1643 | Execution of the "show ospf interface extensive" or "show ospf interface detail" CLI commands on a Juniper Networks device running Junos OS may cause the routing protocols process (RPD) to crash and restart if OSPF interface authentication is configured, leading to a Denial of Service (DoS). By continuously executing the same CLI commands, a local attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Note: Only systems utilizing ARM processors, found on the EX2300 and EX3400, are vulnerable to this issue. Systems shipped with other processor architectures are not vulnerable to this issue. The processor architecture can be displayed via the 'uname -a' command. For example: ARM (vulnerable): % uname -a | awk '{print $NF}' arm PowerPC (not vulnerable): % uname -a | awk '{print $NF}' powerpc AMD (not vulnerable): % uname -a | awk '{print $NF}' amd64 Intel (not vulnerable): % uname -a | awk '{print $NF}' i386 This issue affects Juniper Networks Junos OS: 12.3X48 versions prior to 12.3X48-D100; 14.1X53 versions prior to 14.1X53-D140, 14.1X53-D54; 15.1 versions prior to 15.1R7-S7; 15.1X49 versions prior to 15.1X49-D210; 15.1X53 versions prior to 15.1X53-D593; 16.1 versions prior to 16.1R7-S8; 17.1 versions prior to 17.1R2-S12; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S2, 17.4R3; 18.1 versions prior to 18.1R3-S2; 18.2 versions prior to 18.2R2, 18.2R3; 18.2X75 versions prior to 18.2X75-D40; 18.3 versions prior to 18.3R1-S2, 18.3R2. |
| CVE-2020-11669 | An issue was discovered in the Linux kernel before 5.2 on the powerpc platform. arch/powerpc/kernel/idle_book3s.S does not have save/restore functionality for PNV_POWERSAVE_AMR, PNV_POWERSAVE_UAMOR, and PNV_POWERSAVE_AMOR, aka CID-53a712bae5dd. |
| CVE-2019-18660 | The Linux kernel before 5.4.1 on powerpc allows Information Exposure because the Spectre-RSB mitigation is not in place for all applicable CPUs, aka CID-39e72bf96f58. This is related to arch/powerpc/kernel/entry_64.S and arch/powerpc/kernel/security.c. |
| CVE-2019-15031 | In the Linux kernel through 5.2.14 on the powerpc platform, a local user can read vector registers of other users' processes via an interrupt. To exploit the venerability, a local user starts a transaction (via the hardware transactional memory instruction tbegin) and then accesses vector registers. At some point, the vector registers will be corrupted with the values from a different local Linux process, because MSR_TM_ACTIVE is misused in arch/powerpc/kernel/process.c. |
| CVE-2019-15030 | In the Linux kernel through 5.2.14 on the powerpc platform, a local user can read vector registers of other users' processes via a Facility Unavailable exception. To exploit the venerability, a local user starts a transaction (via the hardware transactional memory instruction tbegin) and then accesses vector registers. At some point, the vector registers will be corrupted with the values from a different local Linux process because of a missing arch/powerpc/kernel/process.c check. |
| CVE-2019-13648 | In the Linux kernel through 5.2.1 on the powerpc platform, when hardware transactional memory is disabled, a local user can cause a denial of service (TM Bad Thing exception and system crash) via a sigreturn() system call that sends a crafted signal frame. This affects arch/powerpc/kernel/signal_32.c and arch/powerpc/kernel/signal_64.c. |
| CVE-2019-12817 | arch/powerpc/mm/mmu_context_book3s64.c in the Linux kernel before 5.1.15 for powerpc has a bug where unrelated processes may be able to read/write to one another's virtual memory under certain conditions via an mmap above 512 TB. Only a subset of powerpc systems are affected. |
| CVE-2019-12614 | An issue was discovered in dlpar_parse_cc_property in arch/powerpc/platforms/pseries/dlpar.c in the Linux kernel through 5.1.6. There is an unchecked kstrdup of prop->name, which might allow an attacker to cause a denial of service (NULL pointer dereference and system crash). |
| CVE-2018-6551 | The malloc implementation in the GNU C Library (aka glibc or libc6), from version 2.24 to 2.26 on powerpc, and only in version 2.26 on i386, did not properly handle malloc calls with arguments close to SIZE_MAX and could return a pointer to a heap region that is smaller than requested, eventually leading to heap corruption. |
| CVE-2018-1091 | In the flush_tmregs_to_thread function in arch/powerpc/kernel/ptrace.c in the Linux kernel before 4.13.5, a guest kernel crash can be triggered from unprivileged userspace during a core dump on a POWER host due to a missing processor feature check and an erroneous use of transactional memory (TM) instructions in the core dump path, leading to a denial of service. |
| CVE-2017-15306 | The kvm_vm_ioctl_check_extension function in arch/powerpc/kvm/powerpc.c in the Linux kernel before 4.13.11 allows local users to cause a denial of service (NULL pointer dereference and system crash) via a KVM_CHECK_EXTENSION KVM_CAP_PPC_HTM ioctl call to /dev/kvm. |
| CVE-2017-1000255 | On Linux running on PowerPC hardware (Power8 or later) a user process can craft a signal frame and then do a sigreturn so that the kernel will take an exception (interrupt), and use the r1 value *from the signal frame* as the kernel stack pointer. As part of the exception entry the content of the signal frame is written to the kernel stack, allowing an attacker to overwrite arbitrary locations with arbitrary values. The exception handling does produce an oops, and a panic if panic_on_oops=1, but only after kernel memory has been over written. This flaw was introduced in commit: "5d176f751ee3 (powerpc: tm: Enable transactional memory (TM) lazily for userspace)" which was merged upstream into v4.9-rc1. Please note that kernels built with CONFIG_PPC_TRANSACTIONAL_MEM=n are not vulnerable. |
| CVE-2016-5828 | The start_thread function in arch/powerpc/kernel/process.c in the Linux kernel through 4.6.3 on powerpc platforms mishandles transactional state, which allows local users to cause a denial of service (invalid process state or TM Bad Thing exception, and system crash) or possibly have unspecified other impact by starting and suspending a transaction before an exec system call. |
| CVE-2016-5412 | arch/powerpc/kvm/book3s_hv_rmhandlers.S in the Linux kernel through 4.7 on PowerPC platforms, when CONFIG_KVM_BOOK3S_64_HV is enabled, allows guest OS users to cause a denial of service (host OS infinite loop) by making a H_CEDE hypercall during the existence of a suspended transaction. |
| CVE-2015-8845 | The tm_reclaim_thread function in arch/powerpc/kernel/process.c in the Linux kernel before 4.4.1 on powerpc platforms does not ensure that TM suspend mode exists before proceeding with a tm_reclaim call, which allows local users to cause a denial of service (TM Bad Thing exception and panic) via a crafted application. |
| CVE-2015-8844 | The signal implementation in the Linux kernel before 4.3.5 on powerpc platforms does not check for an MSR with both the S and T bits set, which allows local users to cause a denial of service (TM Bad Thing exception and panic) via a crafted application. |
| CVE-2015-6526 | The perf_callchain_user_64 function in arch/powerpc/perf/callchain.c in the Linux kernel before 4.0.2 on ppc64 platforms allows local users to cause a denial of service (infinite loop) via a deep 64-bit userspace backtrace. |
| CVE-2014-8165 | scripts/amsvis/powerpcAMS/amsnet.py in powerpc-utils-python uses the pickle Python module unsafely, which allows remote attackers to execute arbitrary code via a crafted serialized object. |
| CVE-2014-4040 | snap in powerpc-utils 1.2.20 produces an archive with fstab and yaboot.conf files potentially containing cleartext passwords, and lacks a warning about reviewing this archive to detect included passwords, which might allow remote attackers to obtain sensitive information by leveraging access to a technical-support data stream. |
| CVE-2014-2673 | The arch_dup_task_struct function in the Transactional Memory (TM) implementation in arch/powerpc/kernel/process.c in the Linux kernel before 3.13.7 on the powerpc platform does not properly interact with the clone and fork system calls, which allows local users to cause a denial of service (Program Check and system crash) via certain instructions that are executed with the processor in the Transactional state. |
| CVE-2012-2100 | The ext4_fill_flex_info function in fs/ext4/super.c in the Linux kernel before 3.2.2, on the x86 platform and unspecified other platforms, allows user-assisted remote attackers to trigger inconsistent filesystem-groups data and possibly cause a denial of service via a malformed ext4 filesystem containing a super block with a large FLEX_BG group size (aka s_log_groups_per_flex value). NOTE: this vulnerability exists because of an incomplete fix for CVE-2009-4307. |
| CVE-2011-4611 | Integer overflow in the perf_event_interrupt function in arch/powerpc/kernel/perf_event.c in the Linux kernel before 2.6.39 on powerpc platforms allows local users to cause a denial of service (unhandled performance monitor exception) via vectors that trigger certain outcomes of performance events. |
| CVE-2010-1446 | arch/powerpc/mm/fsl_booke_mmu.c in KGDB in the Linux kernel 2.6.30 and other versions before 2.6.33, when running on PowerPC, does not properly perform a security check for access to a kernel page, which allows local users to overwrite arbitrary kernel memory, related to Fsl booke. |
| CVE-2009-0029 | The ABI in the Linux kernel 2.6.28 and earlier on s390, powerpc, sparc64, and mips 64-bit platforms requires that a 32-bit argument in a 64-bit register was properly sign extended when sent from a user-mode application, but cannot verify this, which allows local users to cause a denial of service (crash) or possibly gain privileges via a crafted system call. |
| CVE-2007-6694 | The chrp_show_cpuinfo function (chrp/setup.c) in Linux kernel 2.4.21 through 2.6.18-53, when running on PowerPC, might allow local users to cause a denial of service (crash) via unknown vectors that cause the of_get_property function to fail, which triggers a NULL pointer dereference. |
| CVE-2007-3850 | The eHCA driver in Linux kernel 2.6 before 2.6.22, when running on PowerPC, does not properly map userspace resources, which allows local users to read portions of physical address space. |
| CVE-2007-3739 | mm/mmap.c in the hugetlb kernel, when run on PowerPC systems, does not prevent stack expansion from entering into reserved kernel page memory, which allows local users to cause a denial of service (OOPS) via unspecified vectors. |
| CVE-2007-3107 | The signal handling in the Linux kernel before 2.6.22, including 2.6.2, when running on PowerPC systems using HTX, allows local users to cause a denial of service via unspecified vectors involving floating point corruption and concurrency, related to clearing of MSR bits. |
| CVE-2006-5649 | Unspecified vulnerability in the "alignment check exception handling" in Ubuntu 5.10, 6.06 LTS, and 6.10 for the PowerPC (PPC) allows local users to cause a denial of service (kernel panic) via unspecified vectors. |
| CVE-2006-5648 | Ubuntu Linux 6.10 for the PowerPC (PPC) allows local users to cause a denial of service (resource consumption) by using the (1) sys_get_robust_list and (2) sys_set_robust_list functions to create processes that cannot be killed. |
| CVE-2006-5331 | The altivec_unavailable_exception function in arch/powerpc/kernel/traps.c in the Linux kernel before 2.6.19 on 64-bit systems mishandles the case where CONFIG_ALTIVEC is defined and the CPU actually supports Altivec, but the Altivec support was not detected by the kernel, which allows local users to cause a denial of service (panic) by triggering execution of an Altivec instruction. |
| CVE-2006-4093 | Linux kernel 2.x.6 before 2.6.17.9 and 2.4.x before 2.4.33.1 on PowerPC PPC970 systems allows local users to cause a denial of service (crash) related to the "HID0 attention enable on PPC970 at boot time." |
| CVE-2006-2448 | Linux kernel before 2.6.16.21 and 2.6.17, when running on PowerPC, does not perform certain required access_ok checks, which allows local users to read arbitrary kernel memory on 64-bit systems (signal_64.c) and cause a denial of service (crash) and possibly read kernel memory on 32-bit systems (signal_32.c). |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
