Search Results
There are 1682 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2024-4301 | N-Reporter and N-Cloud, products of the N-Partner, have an OS Command Injection vulnerability. Remote attackers with normal user privilege can execute arbitrary system commands by manipulating user inputs on a specific page. |
| CVE-2024-3804 | A vulnerability, which was classified as critical, has been found in Vesystem Cloud Desktop up to 20240408. This issue affects some unknown processing of the file /Public/webuploader/0.1.5/server/fileupload2.php. The manipulation of the argument file leads to unrestricted upload. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-260777 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-3803 | A vulnerability classified as critical was found in Vesystem Cloud Desktop up to 20240408. This vulnerability affects unknown code of the file /Public/webuploader/0.1.5/server/fileupload.php. The manipulation of the argument file leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-260776. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-3505 | JFrog Artifactory Self-Hosted versions below 7.77.3, are vulnerable to sensitive information disclosure whereby a low-privileged authenticated user can read the proxy configuration. This does not affect JFrog cloud deployments. |
| CVE-2024-34404 | A vulnerability was discovered in the Alta Recovery Vault feature of Veritas NetBackup before 10.4 and NetBackup Appliance before 5.4. By design, only the cloud administrator should be able to disable the retention lock of Governance mode images. This vulnerability allowed a NetBackup administrator to modify the expiration of backups under Governance mode (which could cause premature deletion). |
| CVE-2024-34011 | Local privilege escalation due to insecure folder permissions. The following products are affected: Acronis Cyber Protect Cloud Agent (Windows) before build 37758. |
| CVE-2024-34010 | Local privilege escalation due to unquoted search path vulnerability. The following products are affected: Acronis Cyber Protect Cloud Agent (Windows) before build 37758. |
| CVE-2024-3400 | A command injection as a result of arbitrary file creation vulnerability in the GlobalProtect feature of Palo Alto Networks PAN-OS software for specific PAN-OS versions and distinct feature configurations may enable an unauthenticated attacker to execute arbitrary code with root privileges on the firewall. Cloud NGFW, Panorama appliances, and Prisma Access are not impacted by this vulnerability. |
| CVE-2024-3383 | A vulnerability in how Palo Alto Networks PAN-OS software processes data received from Cloud Identity Engine (CIE) agents enables modification of User-ID groups. This impacts user access to network resources where users may be inappropriately denied or allowed access to resources based on your existing Security Policy rules. |
| CVE-2024-33522 | In vulnerable versions of Calico (v3.27.2 and below), Calico Enterprise (v3.19.0-1, v3.18.1, v3.17.3 and below), and Calico Cloud (v19.2.0 and below), an attacker who has local access to the Kubernetes node, can escalate their privileges by exploiting a vulnerability in the Calico CNI install binary. The issue arises from an incorrect SUID (Set User ID) bit configuration in the binary, combined with the ability to control the input binary, allowing an attacker to execute an arbitrary binary with elevated privileges. |
| CVE-2024-32475 | Envoy is a cloud-native, open source edge and service proxy. When an upstream TLS cluster is used with `auto_sni` enabled, a request containing a `host`/`:authority` header longer than 255 characters triggers an abnormal termination of Envoy process. Envoy does not gracefully handle an error when setting SNI for outbound TLS connection. The error can occur when Envoy attempts to use the `host`/`:authority` header value longer than 255 characters as SNI for outbound TLS connection. SNI length is limited to 255 characters per the standard. Envoy always expects this operation to succeed and abnormally aborts the process when it fails. This vulnerability is fixed in 1.30.1, 1.29.4, 1.28.3, and 1.27.5. |
| CVE-2024-31032 | An issue in Huashi Private Cloud CDN Live Streaming Acceleration Server hgateway-sixport v.1.1.2 allows a remote attacker to execute arbitrary code via the manager/ipping.php component. |
| CVE-2024-30407 | The Use of a Hard-coded Cryptographic Key vulnerability in Juniper Networks Juniper Cloud Native Router (JCNR) and containerized routing Protocol Deamon (cRPD) products allows an attacker to perform Person-in-the-Middle (PitM) attacks which results in complete compromise of the container. Due to hardcoded SSH host keys being present on the container, a PitM attacker can intercept SSH traffic without being detected. This issue affects Juniper Networks JCNR: * All versions before 23.4. This issue affects Juniper Networks cRPD: * All versions before 23.4R1. |
| CVE-2024-30255 | Envoy is a cloud-native, open source edge and service proxy. The HTTP/2 protocol stack in Envoy versions prior to 1.29.3, 1.28.2, 1.27.4, and 1.26.8 are vulnerable to CPU exhaustion due to flood of CONTINUATION frames. Envoy's HTTP/2 codec allows the client to send an unlimited number of CONTINUATION frames even after exceeding Envoy's header map limits. This allows an attacker to send a sequence of CONTINUATION frames without the END_HEADERS bit set causing CPU utilization, consuming approximately 1 core per 300Mbit/s of traffic and culminating in denial of service through CPU exhaustion. Users should upgrade to version 1.29.3, 1.28.2, 1.27.4, or 1.26.8 to mitigate the effects of the CONTINUATION flood. As a workaround, disable HTTP/2 protocol for downstream connections. |
| CVE-2024-29922 | Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Quantum Cloud Slider Hero allows Stored XSS.This issue affects Slider Hero: from n/a through 8.6.1. |
| CVE-2024-29795 | Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Interfacelab Media Cloud for Amazon S3, Imgix, Google Cloud Storage, DigitalOcean Spaces and more allows Stored XSS.This issue affects Media Cloud for Amazon S3, Imgix, Google Cloud Storage, DigitalOcean Spaces and more: from n/a through 4.5.24. |
| CVE-2024-29195 | The azure-c-shared-utility is a C library for AMQP/MQTT communication to Azure Cloud Services. This library may be used by the Azure IoT C SDK for communication between IoT Hub and IoT Hub devices. An attacker can cause an integer wraparound or under-allocation or heap buffer overflow due to vulnerabilities in parameter checking mechanism, by exploiting the buffer length parameter in Azure C SDK, which may lead to remote code execution. Requirements for RCE are 1. Compromised Azure account allowing malformed payloads to be sent to the device via IoT Hub service, 2. By passing IoT hub service max message payload limit of 128KB, and 3. Ability to overwrite code space with remote code. Fixed in commit https://github.com/Azure/azure-c-shared-utility/commit/1129147c38ac02ad974c4c701a1e01b2141b9fe2. |
| CVE-2024-29031 | Meshery is an open source, cloud native manager that enables the design and management of Kubernetes-based infrastructure and applications. A SQL injection vulnerability in Meshery prior to version 0.7.17 allows a remote attacker to obtain sensitive information via the `order` parameter of `GetMeshSyncResources`. Version 0.7.17 contains a patch for this issue. |
| CVE-2024-29027 | Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to versions 6.5.5 and 7.0.0-alpha.29, calling an invalid Parse Server Cloud Function name or Cloud Job name crashes the server and may allow for code injection, internal store manipulation or remote code execution. The patch in versions 6.5.5 and 7.0.0-alpha.29 added string sanitation for Cloud Function name and Cloud Job name. As a workaround, sanitize the Cloud Function name and Cloud Job name before it reaches Parse Server. |
| CVE-2024-28782 | IBM QRadar Suite Software 1.10.12.0 through 1.10.18.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 stores user credentials in plain clear text which can be read by an authenticated user. IBM X-Force ID: 285698. |
| CVE-2024-2830 | The WordPress Tag and Category Manager – AI Autotagger plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'st_tag_cloud' shortcode in all versions up to, and including, 3.13.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| CVE-2024-28275 | Puwell Cloud Tech Co, Ltd 360Eyes Pro v3.9.5.16(3090516) was discovered to transmit sensitive information in cleartext. This vulnerability allows attackers to intercept and access sensitive information, including users' credentials and password change requests. |
| CVE-2024-28101 | The Apollo Router is a graph router written in Rust to run a federated supergraph that uses Apollo Federation. Versions 0.9.5 until 1.40.2 are subject to a Denial-of-Service (DoS) type vulnerability. When receiving compressed HTTP payloads, affected versions of the Router evaluate the `limits.http_max_request_bytes` configuration option after the entirety of the compressed payload is decompressed. If affected versions of the Router receive highly compressed payloads, this could result in significant memory consumption while the compressed payload is expanded. Router version 1.40.2 has a fix for the vulnerability. Those who are unable to upgrade may be able to implement mitigations at proxies or load balancers positioned in front of their Router fleet (e.g. Nginx, HAProxy, or cloud-native WAF services) by creating limits on HTTP body upload size. |
| CVE-2024-27919 | Envoy is a cloud-native, open-source edge and service proxy. In versions 1.29.0 and 1.29.1, theEnvoy HTTP/2 protocol stack is vulnerable to the flood of CONTINUATION frames. Envoy's HTTP/2 codec does not reset a request when header map limits have been exceeded. This allows an attacker to send an sequence of CONTINUATION frames without the END_HEADERS bit set causing unlimited memory consumption. This can lead to denial of service through memory exhaustion. Users should upgrade to versions 1.29.2 to mitigate the effects of the CONTINUATION flood. Note that this vulnerability is a regression in Envoy version 1.29.0 and 1.29.1 only. As a workaround, downgrade to version 1.28.1 or earlier or disable HTTP/2 protocol for downstream connections. |
| CVE-2024-27099 | The uAMQP is a C library for AMQP 1.0 communication to Azure Cloud Services. When processing an incorrect `AMQP_VALUE` failed state, may cause a double free problem. This may cause a RCE. Update submodule with commit 2ca42b6e4e098af2d17e487814a91d05f6ae4987. |
| CVE-2024-26160 | Windows Cloud Files Mini Filter Driver Information Disclosure Vulnerability |
| CVE-2024-26133 | EventStoreDB (ESDB) is an operational database built to store events. A vulnerability has been identified in the projections subsystem in versions 20 prior to 20.10.6, 21 prior to 21.10.11, 22 prior to 22.10.5, and 23 prior to 23.10.1. Only database instances that use custom projections are affected by this vulnerability. User passwords may become accessible to those who have access to the chunk files on disk, and users who have read access to system streams. Only users in the `$admins` group can access system streams by default. ESDB 23.10.1, 22.10.5, 21.10.11, and 20.10.6 contain a patch for this issue. Users should upgrade EventStoreDB, reset the passwords for current and previous members of `$admins` and `$ops` groups, and, if a password was reused in any other system, reset it in those systems to a unique password to follow best practices. If an upgrade cannot be done immediately, reset the passwords for current and previous members of `$admins` and `$ops` groups. Avoid creating custom projections until the patch has been applied. |
| CVE-2024-25642 | Due to improper validation of certificate in SAP Cloud Connector - version 2.0, attacker can impersonate the genuine servers to interact with SCC breaking the mutual authentication. Hence, the attacker can intercept the request to view/modify sensitive information. There is no impact on the availability of the system. |
| CVE-2024-25139 | In TP-Link Omada er605 1.0.1 through (v2.6) 2.2.3, a cloud-brd binary is susceptible to an integer overflow that leads to a heap-based buffer overflow. After heap shaping, an attacker can achieve code execution in the context of the cloud-brd binary that runs at the root level. This is fixed in ER605(UN)_v2_2.2.4 Build 020240119. |
| CVE-2024-23825 | TablePress is a table plugin for Wordpress. For importing tables, TablePress makes external HTTP requests based on a URL that is provided by the user. That user input is filtered insufficiently, which makes it is possible to send requests to unintended network locations and receive responses. On sites in a cloud environment like AWS, an attacker can potentially make GET requests to the instance's metadata REST API. If the instance's configuration is insecure, this can lead to the exposure of internal data, including credentials. This vulnerability is fixed in 2.2.5. |
| CVE-2024-23789 | Energy Management Controller with Cloud Services JH-RVB1 /JH-RV11 Ver.B0.1.9.1 and earlier allows a network-adjacent unauthenticated attacker to execute an arbitrary OS command on the affected product. |
| CVE-2024-23788 | Server-side request forgery vulnerability in Energy Management Controller with Cloud Services JH-RVB1 /JH-RV11 Ver.B0.1.9.1 and earlier allows a network-adjacent unauthenticated attacker to send an arbitrary HTTP request (GET) from the affected product. |
| CVE-2024-23787 | Path traversal vulnerability in Energy Management Controller with Cloud Services JH-RVB1 /JH-RV11 Ver.B0.1.9.1 and earlier allows a network-adjacent unauthenticated attacker to obtain an arbitrary file in the affected product. |
| CVE-2024-23786 | Cross-site scripting vulnerability in Energy Management Controller with Cloud Services JH-RVB1 /JH-RV11 Ver.B0.1.9.1 and earlier allows a network-adjacent unauthenticated attacker to execute an arbitrary script on the web browser of the user who is accessing the management page of the affected product. |
| CVE-2024-23785 | Cross-site request forgery vulnerability in Energy Management Controller with Cloud Services JH-RVB1 /JH-RV11 Ver.B0.1.9.1 and earlier allows a remote unauthenticated attacker to change the product settings. |
| CVE-2024-23784 | Improper access control vulnerability exists in Energy Management Controller with Cloud Services JH-RVB1 /JH-RV11 Ver.B0.1.9.1 and earlier, which may allow a network-adjacent unauthenticated attacker to obtain a username and its hashed password displayed on the management page of the affected product. |
| CVE-2024-23783 | Improper authentication vulnerability in Energy Management Controller with Cloud Services JH-RVB1 /JH-RV11 Ver.B0.1.9.1 and earlier allows a network-adjacent unauthenticated attacker to access the affected product without authentication. |
| CVE-2024-22412 | ClickHouse is an open-source column-oriented database management system. A bug exists in the cloud ClickHouse offering prior to version 24.0.2.54535 and in github.com/clickhouse/clickhouse version 23.1. Query caching bypasses the role based access controls and the policies being enforced on roles. In affected versions, the query cache only respects separate users, however this is not documented and not expected behavior. People relying on ClickHouse roles can have their access control lists bypassed if they are using query caching. Attackers who have control of a role could guess queries and see data they shouldn't have access to. Version 24.1 of ClickHouse and version 24.0.2.54535 of ClickHouse Cloud contain a patch for this issue. Based on the documentation, role based access control should be enforced regardless if query caching is enabled or not. |
| CVE-2024-22403 | Nextcloud server is a self hosted personal cloud system. In affected versions OAuth codes did not expire. When an attacker would get access to an authorization code they could authenticate at any time using the code. As of version 28.0.0 OAuth codes are invalidated after 10 minutes and will no longer be authenticated. To exploit this vulnerability an attacker would need to intercept an OAuth code from a user session. It is recommended that the Nextcloud Server is upgraded to 28.0.0. There are no known workarounds for this vulnerability. |
| CVE-2024-22355 | IBM QRadar Suite Products 1.10.12.0 through 1.10.18.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 280781. |
| CVE-2024-22337 | IBM QRadar Suite 1.10.12.0 through 1.10.17.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 279977. |
| CVE-2024-22336 | IBM QRadar Suite 1.10.12.0 through 1.10.17.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 279976. |
| CVE-2024-22335 | IBM QRadar Suite 1.10.12.0 through 1.10.17.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 279975. |
| CVE-2024-22266 | VMware Avi Load Balancer contains an information disclosure vulnerability. A malicious actor with access to the system logs can view cloud connection credentials in plaintext. |
| CVE-2024-22256 | VMware Cloud Director contains a partial information disclosure vulnerability. A malicious actor can potentially gather information about organization names based on the behavior of the instance. |
| CVE-2024-22236 | In Spring Cloud Contract, versions 4.1.x prior to 4.1.1, versions 4.0.x prior to 4.0.5, and versions 3.1.x prior to 3.1.10, test execution is vulnerable to local information disclosure via temporary directory created with unsafe permissions through the shaded com.google.guava:guava dependency in the org.springframework.cloud:spring-cloud-contract-shade dependency. |
| CVE-2024-22041 | A vulnerability has been identified in Cerberus PRO EN Engineering Tool (All versions), Cerberus PRO EN Fire Panel FC72x (All versions < IP8 SR4), Cerberus PRO EN X200 Cloud Distribution (All versions < V4.3.5618), Cerberus PRO EN X300 Cloud Distribution (All versions < V4.3.5617), Sinteso FS20 EN Engineering Tool (All versions), Sinteso FS20 EN Fire Panel FC20 (All versions < MP8 SR4), Sinteso FS20 EN X200 Cloud Distribution (All versions < V4.3.5618), Sinteso FS20 EN X300 Cloud Distribution (All versions < V4.3.5617), Sinteso Mobile (All versions). The network communication library in affected systems improperly handles memory buffers when parsing X.509 certificates. This could allow an unauthenticated remote attacker to crash the network service. |
| CVE-2024-22040 | A vulnerability has been identified in Cerberus PRO EN Engineering Tool (All versions), Cerberus PRO EN Fire Panel FC72x (All versions < IP8 SR4), Cerberus PRO EN X200 Cloud Distribution (All versions < V4.3.5618), Cerberus PRO EN X300 Cloud Distribution (All versions < V4.3.5617), Sinteso FS20 EN Engineering Tool (All versions), Sinteso FS20 EN Fire Panel FC20 (All versions < MP8 SR4), Sinteso FS20 EN X200 Cloud Distribution (All versions < V4.3.5618), Sinteso FS20 EN X300 Cloud Distribution (All versions < V4.3.5617), Sinteso Mobile (All versions). The network communication library in affected systems insufficiently validates HMAC values which might result in a buffer overread. This could allow an unauthenticated remote attacker to crash the network service. |
| CVE-2024-22039 | A vulnerability has been identified in Cerberus PRO EN Engineering Tool (All versions < IP8), Cerberus PRO EN Fire Panel FC72x (All versions < IP8), Cerberus PRO EN X200 Cloud Distribution (All versions < V4.0.5016), Cerberus PRO EN X300 Cloud Distribution (All versions < V4.2.5015), Sinteso FS20 EN Engineering Tool (All versions < MP8), Sinteso FS20 EN Fire Panel FC20 (All versions < MP8), Sinteso FS20 EN X200 Cloud Distribution (All versions < V4.0.5016), Sinteso FS20 EN X300 Cloud Distribution (All versions < V4.2.5015), Sinteso Mobile (All versions < V3.0.0). The network communication library in affected systems does not validate the length of certain X.509 certificate attributes which might result in a stack-based buffer overflow. This could allow an unauthenticated remote attacker to execute code on the underlying operating system with root privileges. |
| CVE-2024-21803 | Use After Free vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (bluetooth modules) allows Local Execution of Code. This vulnerability is associated with program files https://gitee.Com/anolis/cloud-kernel/blob/devel-5.10/net/bluetooth/af_bluetooth.C. This issue affects Linux kernel: from v2.6.12-rc2 before v6.8-rc1. |
| CVE-2024-21682 | This High severity Injection vulnerability was introduced in Assets Discovery 1.0 - 6.2.0 (all versions). Assets Discovery, which can be downloaded via Atlassian Marketplace, is a network scanning tool that can be used with or without an agent with Jira Service Management Cloud, Data Center or Server. It detects hardware and software that is connected to your local network and extracts detailed information about each asset. This data can then be imported into Assets in Jira Service Management to help you manage all of the devices and configuration items within your local network. This Injection vulnerability, with a CVSS Score of 7.2, allows an authenticated attacker to modify the actions taken by a system call which has high impact to confidentiality, high impact to integrity, high impact to availability, and requires no user interaction. Atlassian recommends that Assets Discovery customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions See the release notes (https://confluence.atlassian.com/assetapps/assets-discovery-3-2-1-cloud-6-2-1-data_center-1333987182.html). You can download the latest version of Assets Discovery from the Atlassian Marketplace (https://marketplace.atlassian.com/apps/1214668/assets-discovery?hosting=datacenter&tab=installation). This vulnerability was reported via our Penetration Testing program. |
| CVE-2024-21669 | Hyperledger Aries Cloud Agent Python (ACA-Py) is a foundation for building decentralized identity applications and services running in non-mobile environments. When verifying W3C Format Verifiable Credentials using JSON-LD with Linked Data Proofs (LDP-VCs), the result of verifying the presentation `document.proof` was not factored into the final `verified` value (`true`/`false`) on the presentation record. The flaw enables holders of W3C Format Verifiable Credentials using JSON-LD with Linked Data Proofs (LDPs) to present incorrectly constructed proofs, and allows malicious verifiers to save and replay a presentation from such holders as their own. This vulnerability has been present since version 0.7.0 and fixed in version 0.10.5. |
| CVE-2024-21418 | Software for Open Networking in the Cloud (SONiC) Elevation of Privilege Vulnerability |
| CVE-2024-21310 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2024-1385 | The WP-Stateless – Google Cloud Storage plugin for WordPress is vulnerable to unauthorized loss of data due to a missing capability check on the dismiss_notices() function in all versions up to, and including, 3.4.0. This makes it possible for authenticated attackers, with subscriber-level access and above, to update arbitrary option values to the current time, which may completely take a site offline. |
| CVE-2023-6248 | The Syrus4 IoT gateway utilizes an unsecured MQTT server to download and execute arbitrary commands, allowing a remote unauthenticated attacker to execute code on any Syrus4 device connected to the cloud service. The MQTT server also leaks the location, video and diagnostic data from each connected device. An attacker who knows the IP address of the server is able to connect and perform the following operations: * Get location data of the vehicle the device is connected to * Send CAN bus messages via the ECU module ( https://syrus.digitalcomtech.com/docs/ecu-1 https://syrus.digitalcomtech.com/docs/ecu-1 ) * Immobilize the vehicle via the safe-immobilizer module ( https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization ) * Get live video through the connected video camera * Send audio messages to the driver ( https://syrus.digitalcomtech.com/docs/system-tools#apx-tts https://syrus.digitalcomtech.com/docs/system-tools#apx-tts ) |
| CVE-2023-6221 | The cloud provider MachineSense uses for integration and deployment for multiple MachineSense devices, such as the programmable logic controller (PLC), PumpSense, PowerAnalyzer, FeverWarn, and others is insufficiently protected against unauthorized access. An attacker with access to the internal procedures could view source code, secret credentials, and more. |
| CVE-2023-6149 | Qualys Jenkins Plugin for WAS prior to version and including 2.0.11 was identified to be affected by a security flaw, which was missing a permission check while performing a connectivity check to Qualys Cloud Services. This allowed any user with login access to configure or edit jobs to utilize the plugin and configure potential a rouge endpoint via which it was possible to control response for certain request which could be injected with XXE payloads leading to XXE while processing the response data |
| CVE-2023-6148 | Qualys Jenkins Plugin for Policy Compliance prior to version and including 1.0.5 was identified to be affected by a security flaw, which was missing a permission check while performing a connectivity check to Qualys Cloud Services. This allowed any user with login access and access to configure or edit jobs to utilize the plugin to configure a potential rouge endpoint via which it was possible to control response for certain request which could be injected with XSS payloads leading to XSS while processing the response data |
| CVE-2023-6147 | Qualys Jenkins Plugin for Policy Compliance prior to version and including 1.0.5 was identified to be affected by a security flaw, which was missing a permission check while performing a connectivity check to Qualys Cloud Services. This allowed any user with login access to configure or edit jobs to utilize the plugin and configure potential a rouge endpoint via which it was possible to control response for certain request which could be injected with XXE payloads leading to XXE while processing the response data |
| CVE-2023-6099 | A vulnerability classified as critical has been found in Shenzhen Youkate Industrial Facial Love Cloud Payment System up to 1.0.55.0.0.1. This affects an unknown part of the file /SystemMng.ashx of the component Account Handler. The manipulation of the argument operatorRole with the input 00 leads to improper privilege management. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-245061 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-52338 | A link following vulnerability in the Trend Micro Deep Security 20.0 and Trend Micro Cloud One - Endpoint and Workload Security Agent could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. |
| CVE-2023-52337 | An improper access control vulnerability in Trend Micro Deep Security 20.0 and Trend Micro Cloud One - Endpoint and Workload Security Agent could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. |
| CVE-2023-52185 | Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Everestthemes Everest Backup – WordPress Cloud Backup, Migration, Restore & Cloning Plugin.This issue affects Everest Backup – WordPress Cloud Backup, Migration, Restore & Cloning Plugin: from n/a through 2.1.9. |
| CVE-2023-51661 | Wasmer is a WebAssembly runtime that enables containers to run anywhere: from Desktop to the Cloud, Edge and even the browser. Wasm programs can access the filesystem outside of the sandbox. Service providers running untrusted Wasm code on Wasmer can unexpectedly expose the host filesystem. This vulnerability has been patched in version 4.2.4. |
| CVE-2023-50959 | IBM Cloud Pak for Business Automation 18.0.0, 18.0.1, 18.0.2,19.0.1, 19.0.2, 19.0.3,20.0.1, 20.0.2, 20.0.3, 21.0.1, 21.0.2, 21.0.3, 22.0.1,2 2.0.2, 23.0.1, and 23.0.2 may allow end users to query more documents than expected from a connected Enterprise Content Management system when configured to use a system account. IBM X-Force ID: 275938. |
| CVE-2023-50951 | IBM QRadar Suite 1.10.12.0 through 1.10.17.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 in some circumstances will log some sensitive information about invalid authorization attempts. IBM X-Force ID: 275747. |
| CVE-2023-5077 | The Vault and Vault Enterprise ("Vault") Google Cloud secrets engine did not preserve existing Google Cloud IAM Conditions upon creating or updating rolesets. Fixed in Vault 1.13.0. |
| CVE-2023-50612 | Insecure Permissions vulnerability in fit2cloud Cloud Explorer Lite version 1.4.1, allow local attackers to escalate privileges and obtain sensitive information via the cloud accounts parameter. |
| CVE-2023-50424 | SAP BTP Security Services Integration Library ([Golang] github.com/sap/cloud-security-client-go) - versions < 0.17.0, allow under certain conditions an escalation of privileges. On successful exploitation, an unauthenticated attacker can obtain arbitrary permissions within the application. |
| CVE-2023-50422 | SAP BTP Security Services Integration Library ([Java] cloud-security-services-integration-library) - versions below 2.17.0 and versions from 3.0.0 to before 3.3.0, allow under certain conditions an escalation of privileges. On successful exploitation, an unauthenticated attacker can obtain arbitrary permissions within the application. |
| CVE-2023-50253 | Laf is a cloud development platform. In the Laf version design, the log uses communication with k8s to quickly retrieve logs from the container without the need for additional storage. However, in version 1.0.0-beta.13 and prior, this interface does not verify the permissions of the pod, which allows authenticated users to obtain any pod logs under the same namespace through this method, thereby obtaining sensitive information printed in the logs. As of time of publication, no known patched versions exist. |
| CVE-2023-49792 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. In Nextcloud Server prior to versions 26.0.9 and 27.1.4; as well as Nextcloud Enterprise Server prior to versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4; when a (reverse) proxy is configured as trusted proxy the server could be tricked into reading a wrong remote address for an attacker, allowing them executing authentication attempts than intended. Nextcloud Server versions 26.0.9 and 27.1.4 and Nextcloud Enterprise Server versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4 contain a patch for this issue. No known workarounds are available. |
| CVE-2023-49791 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. In Nextcloud Server prior to versions 26.0.9 and 27.1.4; as well as Nextcloud Enterprise Server prior to versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4; when an attacker manages to get access to an active session of another user via another way, they could delete and modify workflows by sending calls directly to the API bypassing the password confirmation shown in the UI. Nextcloud Server versions 26.0.9 and 27.1.4 and Nextcloud Enterprise Server versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4 contain a patch for this issue. No known workarounds are available. |
| CVE-2023-49652 | Incorrect permission checks in Jenkins Google Compute Engine Plugin 4.550.vb_327fca_3db_11 and earlier allow attackers with global Item/Configure permission (while lacking Item/Configure permission on any particular job) to enumerate system-scoped credentials IDs of credentials stored in Jenkins and to connect to Google Cloud Platform using attacker-specified credentials IDs obtained through another method, to obtain information about existing projects. This fix has been backported to 4.3.17.1. |
| CVE-2023-49578 | SAP Cloud Connector - version 2.0, allows an authenticated user with low privilege to perform Denial of service attack from adjacent UI by sending a malicious request which leads to low impact on the availability and no impact on confidentiality or Integrity of the application. |
| CVE-2023-49473 | Shenzhen JF6000 Cloud Media Collaboration Processing Platform firmware version V1.2.0 and software version V2.0.0 build 6245 is vulnerable to Incorrect Access Control. |
| CVE-2023-48704 | ClickHouse is an open-source column-oriented database management system that allows generating analytical data reports in real-time. A heap buffer overflow issue was discovered in ClickHouse server. An attacker could send a specially crafted payload to the native interface exposed by default on port 9000/tcp, triggering a bug in the decompression logic of Gorilla codec that crashes the ClickHouse server process. This attack does not require authentication. This issue has been addressed in ClickHouse Cloud version 23.9.2.47551 and ClickHouse versions 23.10.5.20, 23.3.18.15, 23.8.8.20, and 23.9.6.20. |
| CVE-2023-48684 | Sensitive information disclosure and manipulation due to missing authorization. The following products are affected: Acronis Cyber Protect Cloud Agent (Linux, macOS, Windows) before build 37758. |
| CVE-2023-48683 | Sensitive information disclosure and manipulation due to missing authorization. The following products are affected: Acronis Cyber Protect Cloud Agent (Linux, macOS, Windows) before build 37758. |
| CVE-2023-48676 | Sensitive information disclosure and manipulation due to missing authorization. The following products are affected: Acronis Cyber Protect Cloud Agent (Windows) before build 36943. |
| CVE-2023-48308 | Nextcloud/Cloud is a calendar app for Nextcloud. An attacker can gain access to stacktrace and internal paths of the server when generating an exception while editing a calendar appointment. It is recommended that the Nextcloud Calendar app is upgraded to 4.5.3 |
| CVE-2023-48306 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 25.0.0 and prior to versions 25.0.11, 26.0.6, and 27.1.0 of Nextcloud Server and starting in version 22.0.0 and prior to versions 22.2.10.16, 23.0.12.11, 24.0.12.7, 25.0.11, 26.0.6, and 27.1.0 of Nextcloud Enterprise Server, the DNS pin middleware was vulnerable to DNS rebinding allowing an attacker to perform SSRF as a final result. Nextcloud Server 25.0.11, 26.0.6, and 27.1.0 and Nextcloud Enterprise Server 22.2.10.16, 23.0.12.11, 24.0.12.7, 25.0.11, 26.0.6, and 27.1.0 contain patches for this issue. No known workarounds are available. |
| CVE-2023-48305 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 25.0.0 and prior to versions 25.0.11, 26.0.6, and 27.1.0 of Nextcloud Server and Nextcloud Enterprise Server, when the log level was set to debug, the user_ldap app logged user passwords in plaintext into the log file. If the log file was then leaked or shared in any way the users' passwords would be leaked. Nextcloud Server and Nextcloud Enterprise Server versions 25.0.11, 26.0.6, and 27.1.0 contain a patch for this issue. As a workaround, change config setting `loglevel` to `1` or higher (should always be higher than 1 in production environments). |
| CVE-2023-48304 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 25.0.0 and prior to versions 25.0.11, 26.0.6, and 27.1.0 of Nextcloud Server and starting in version 22.0.0 and prior to versions 22.2.10.16, 23.0.12.11, 24.0.12.7, 25.0.11, 26.0.6, and 27.1.0 of Nextcloud Enterprise Server, an attacker could enable and disable the birthday calendar for any user on the same server. Nextcloud Server 25.0.11, 26.0.6, and 27.1.0 and Nextcloud Enterprise Server 22.2.10.16, 23.0.12.11, 24.0.12.7, 25.0.11, 26.0.6, and 27.1.0 contain patches for this issue. No known workarounds are available. |
| CVE-2023-48303 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 25.0.0 and prior to versions 25.0.11, 26.0.6, and 27.1.0 of Nextcloud Server and Nextcloud Enterprise Server, admins can change authentication details of user configured external storage. Nextcloud Server and Nextcloud Enterprise Server versions 25.0.11, 26.0.6, and 27.1.0 contain a patch for this issue. No known workarounds are available. |
| CVE-2023-48302 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 25.0.0 and prior to versions 25.0.13, 26.0.8, and 27.1.3 of Nextcloud Server and Nextcloud Enterprise Server, when a user is tricked into copy pasting HTML code without markup (Ctrl+Shift+V) the markup will actually render. Nextcloud Server and Nextcloud Enterprise Server versions 25.0.13, 26.0.8, and 27.1.3 contain a fix for this issue. As a workaround, disable app text. |
| CVE-2023-48301 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 25.0.0 and prior to versions 25.0.13, 26.0.8, and 27.1.3 of Nextcloud Server and Nextcloud Enterprise Server, an attacker could insert links into circles name that would be opened when clicking the circle name in a search filter. Nextcloud Server and Nextcloud Enterprise Server versions 25.0.13, 26.0.8, and 27.1.3 contain a fix for this issue. As a workaround, disable app circles. |
| CVE-2023-48239 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 25.0.0 and prior to versions 25.0.13, 26.0.8, and 27.1.3 of Nextcloud Server and starting in version 20.0.0 and prior to versions 20.0.14.16, 21.0.9.13, 22.2.10.15, 23.0.12.12, 24.0.12.8, 25.0.13, 26.0.8, and 27.1.3 of Nextcloud Enterprise Server, a malicious user could update any personal or global external storage, making them inaccessible for everyone else as well. Nextcloud Server 25.0.13, 26.0.8, and 27.1.3 and Nextcloud Enterprise Server is upgraded to 20.0.14.16, 21.0.9.13, 22.2.10.15, 23.0.12.12, 24.0.12.8, 25.0.13, 26.0.8, and 27.1.3 contain a patch for this issue. As a workaround, disable app files_external. This workaround also makes the external storage inaccessible but retains the configurations until a patched version has been deployed. |
| CVE-2023-48225 | Laf is a cloud development platform. Prior to version 1.0.0-beta.13, the control of LAF app enV is not strict enough, and in certain scenarios of privatization environment, it may lead to sensitive information leakage in secret and configmap. In ES6 syntax, if an obj directly references another obj, the name of the obj itself will be used as the key, and the entire object structure will be integrated intact. When constructing the deployment instance of the app, env was found from the database and directly inserted into the template, resulting in controllability here. Sensitive information in the secret and configmap can be read through the k8s envFrom field. In a privatization environment, when `namespaceConf. fixed` is marked, it may lead to the leakage of sensitive information in the system. As of time of publication, it is unclear whether any patches or workarounds exist. |
| CVE-2023-4801 | An improper certification validation vulnerability in the Insider Threat Management (ITM) Agent for MacOS could be used by an anonymous actor on an adjacent network to establish a man-in-the-middle position between the agent and the ITM server after the agent has registered. All versions prior to 7.14.3.69 are affected. Agents for Windows, Linux, and Cloud are unaffected. |
| CVE-2023-47742 | IBM QRadar Suite Products 1.10.12.0 through 1.10.18.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 could disclose sensitive information using man in the middle techniques due to not correctly enforcing all aspects of certificate validation in some circumstances. IBM X-Force ID: 272533. |
| CVE-2023-47731 | IBM QRadar Suite Software 1.10.12.0 through 1.10.19.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 is vulnerable to stored cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 272203. |
| CVE-2023-47727 | IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 and IBM QRadar Suite Software 1.10.12.0 through 1.10.20.0 could allow an authenticated user to modify dashboard parameters due to improper input validation. IBM X-Force ID: 272089. |
| CVE-2023-47529 | Exposure of Sensitive Information to an Unauthorized Actor vulnerability in ThemeIsle Cloud Templates & Patterns collection.This issue affects Cloud Templates & Patterns collection: from n/a through 1.2.2. |
| CVE-2023-46742 | CubeFS is an open-source cloud-native file storage system. CubeFS prior to version 3.3.1 was found to leak users secret keys and access keys in the logs in multiple components. When CubeCS creates new users, it leaks the users secret key. This could allow a lower-privileged user with access to the logs to retrieve sensitive information and impersonate other users with higher privileges than themselves. The issue has been patched in v3.3.1. There is no other mitigation than upgrading CubeFS. |
| CVE-2023-46741 | CubeFS is an open-source cloud-native file storage system. A vulnerability was found in CubeFS prior to version 3.3.1 that could allow users to read sensitive data from the logs which could allow them escalate privileges. CubeFS leaks configuration keys in plaintext format in the logs. These keys could allow anyone to carry out operations on blobs that they otherwise do not have permissions for. For example, an attacker that has succesfully retrieved a secret key from the logs can delete blogs from the blob store. The attacker can either be an internal user with limited privileges to read the log, or they can be an external user who has escalated privileges sufficiently to access the logs. The vulnerability has been patched in v3.3.1. There is no other mitigation than upgrading. |
| CVE-2023-46740 | CubeFS is an open-source cloud-native file storage system. Prior to version 3.3.1, CubeFS used an insecure random string generator to generate user-specific, sensitive keys used to authenticate users in a CubeFS deployment. This could allow an attacker to predict and/or guess the generated string and impersonate a user thereby obtaining higher privileges. When CubeFS creates new users, it creates a piece of sensitive information for the user called the “accessKey”. To create the "accesKey", CubeFS uses an insecure string generator which makes it easy to guess and thereby impersonate the created user. An attacker could leverage the predictable random string generator and guess a users access key and impersonate the user to obtain higher privileges. The issue has been fixed in v3.3.1. There is no other mitigation than to upgrade. |
| CVE-2023-46739 | CubeFS is an open-source cloud-native file storage system. A vulnerability was found during in the CubeFS master component in versions prior to 3.3.1 that could allow an untrusted attacker to steal user passwords by carrying out a timing attack. The root case of the vulnerability was that CubeFS used raw string comparison of passwords. The vulnerable part of CubeFS was the UserService of the master component. The UserService gets instantiated when starting the server of the master component. The issue has been patched in v3.3.1. For impacted users, there is no other way to mitigate the issue besides upgrading. |
| CVE-2023-46738 | CubeFS is an open-source cloud-native file storage system. A security vulnerability was found in CubeFS HandlerNode in versions prior to 3.3.1 that could allow authenticated users to send maliciously-crafted requests that would crash the ObjectNode and deny other users from using it. The root cause was improper handling of incoming HTTP requests that could allow an attacker to control the ammount of memory that the ObjectNode would allocate. A malicious request could make the ObjectNode allocate more memory that the machine had available, and the attacker could exhaust memory by way of a single malicious request. An attacker would need to be authenticated in order to invoke the vulnerable code with their malicious request and have permissions to delete objects. In addition, the attacker would need to know the names of existing buckets of the CubeFS deployment - otherwise the request would be rejected before it reached the vulnerable code. As such, the most likely attacker is an inside user or an attacker that has breached the account of an existing user in the cluster. The issue has been patched in v3.3.1. There is no other mitigation besides upgrading. |
| CVE-2023-46326 | ZStack Cloud version 3.10.38 and before allows unauthenticated API access to the list of active job UUIDs and the session ID for each of these. This leads to privilege escalation. |
| CVE-2023-46129 | NATS.io is a high performance open source pub-sub distributed communication technology, built for the cloud, on-premise, IoT, and edge computing. The cryptographic key handling library, nkeys, recently gained support for encryption, not just for signing/authentication. This is used in nats-server 2.10 (Sep 2023) and newer for authentication callouts. In nkeys versions 0.4.0 through 0.4.5, corresponding with NATS server versions 2.10.0 through 2.10.3, the nkeys library's `xkeys` encryption handling logic mistakenly passed an array by value into an internal function, where the function mutated that buffer to populate the encryption key to use. As a result, all encryption was actually to an all-zeros key. This affects encryption only, not signing. FIXME: FILL IN IMPACT ON NATS-SERVER AUTH CALLOUT SECURITY. nkeys Go library 0.4.6, corresponding with NATS Server 2.10.4, has a patch for this issue. No known workarounds are available. For any application handling auth callouts in Go, if using the nkeys library, update the dependency, recompile and deploy that in lockstep. |
| CVE-2023-45746 | Cross-site scripting vulnerability in Movable Type series allows a remote authenticated attacker to inject an arbitrary script. Affected products/versions are as follows: Movable Type 7 r.5405 and earlier (Movable Type 7 Series), Movable Type Advanced 7 r.5405 and earlier (Movable Type 7 Series), Movable Type Premium 1.58 and earlier, Movable Type Premium Advanced 1.58 and earlier, Movable Type Cloud Edition (Version 7) r.5405 and earlier, and Movable Type Premium Cloud Edition 1.58 and earlier. |
| CVE-2023-45248 | Local privilege escalation due to DLL hijacking vulnerability. The following products are affected: Acronis Cyber Protect Cloud Agent (Windows) before build 36497, Acronis Cyber Protect 16 (Windows) before build 37391. |
| CVE-2023-45244 | Sensitive information disclosure and manipulation due to missing authorization. The following products are affected: Acronis Cyber Protect Cloud Agent (Linux, macOS, Windows) before build 35895, Acronis Cyber Protect 16 (Linux, macOS, Windows) before build 37391. |
| CVE-2023-45241 | Sensitive information leak through log files. The following products are affected: Acronis Cyber Protect Cloud Agent (Linux, macOS, Windows) before build 35739, Acronis Cyber Protect 16 (Linux, macOS, Windows) before build 37391. |
| CVE-2023-45189 | A vulnerability in IBM Robotic Process Automation and IBM Robotic Process Automation for Cloud Pak 21.0.0 through 21.0.7.10, 23.0.0 through 23.0.10 may result in access to client vault credentials. This difficult to exploit vulnerability could allow a low privileged attacker to programmatically access client vault credentials. IBM X-Force ID: 268752. |
| CVE-2023-45151 | Nextcloud server is an open source home cloud platform. Affected versions of Nextcloud stored OAuth2 tokens in plaintext which allows an attacker who has gained access to the server to potentially elevate their privilege. This issue has been addressed and users are recommended to upgrade their Nextcloud Server to version 25.0.8, 26.0.3 or 27.0.1. There are no known workarounds for this vulnerability. |
| CVE-2023-45148 | Nextcloud is an open source home cloud server. When Memcached is used as `memcache.distributed` the rate limiting in Nextcloud Server could be reset unexpectedly resetting the rate count earlier than intended. Users are advised to upgrade to versions 25.0.11, 26.0.6 or 27.1.0. Users unable to upgrade should change their config setting `memcache.distributed` to `\OC\Memcache\Redis` and install Redis instead of Memcached. |
| CVE-2023-4468 | A vulnerability was found in Poly Trio 8500, Trio 8800 and Trio C60. It has been classified as problematic. This affects an unknown part of the component Poly Lens Management Cloud Registration. The manipulation leads to missing authorization. It is possible to launch the attack on the physical device. The exploit has been disclosed to the public and may be used. The identifier VDB-249261 was assigned to this vulnerability. |
| CVE-2023-44397 | CloudExplorer Lite is an open source, lightweight cloud management platform. Prior to version 1.4.1, the gateway filter of CloudExplorer Lite uses a controller with path starting with `matching/API/`, which can cause a permission bypass. Version 1.4.1 contains a patch for this issue. |
| CVE-2023-44213 | Sensitive information disclosure due to excessive collection of system information. The following products are affected: Acronis Cyber Protect Cloud Agent (Windows) before build 35739, Acronis Cyber Protect 16 (Windows) before build 37391. |
| CVE-2023-44211 | Sensitive information disclosure and manipulation due to missing authorization. The following products are affected: Acronis Cyber Protect Cloud Agent (Linux, macOS, Windows) before build 31637, Acronis Cyber Protect 16 (Linux, Windows) before build 37391. |
| CVE-2023-42481 | In SAP Commerce Cloud - versions HY_COM 1905, HY_COM 2005, HY_COM2105, HY_COM 2011, HY_COM 2205, COM_CLOUD 2211, a locked B2B user can misuse the forgotten password functionality to un-block his user account again and re-gain access if SAP Commerce Cloud - Composable Storefront is used as storefront, due to weak access controls in place. This leads to a considerable impact on confidentiality and integrity. |
| CVE-2023-42442 | JumpServer is an open source bastion host and a professional operation and maintenance security audit system. Starting in version 3.0.0 and prior to versions 3.5.5 and 3.6.4, session replays can download without authentication. Session replays stored in S3, OSS, or other cloud storage are not affected. The api `/api/v1/terminal/sessions/` permission control is broken and can be accessed anonymously. SessionViewSet permission classes set to `[RBACPermission | IsSessionAssignee]`, relation is or, so any permission matched will be allowed. Versions 3.5.5 and 3.6.4 have a fix. After upgrading, visit the api `$HOST/api/v1/terminal/sessions/?limit=1`. The expected http response code is 401 (`not_authenticated`). |
| CVE-2023-42425 | An issue in Turing Video Turing Edge+ EVC5FD v.1.38.6 allows remote attacker to execute arbitrary code and obtain sensitive information via the cloud connection components. |
| CVE-2023-41748 | Remote command execution due to improper input validation. The following products are affected: Acronis Cloud Manager (Windows) before build 6.2.23089.203. |
| CVE-2023-41747 | Sensitive information disclosure due to improper input validation. The following products are affected: Acronis Cloud Manager (Windows) before build 6.2.23089.203. |
| CVE-2023-41746 | Remote command execution due to improper input validation. The following products are affected: Acronis Cloud Manager (Windows) before build 6.2.23089.203. |
| CVE-2023-41248 | In JetBrains TeamCity before 2023.05.3 stored XSS was possible during Cloud Profiles configuration |
| CVE-2023-41058 | Parse Server is an open source backend server. In affected versions the Parse Cloud trigger `beforeFind` is not invoked in certain conditions of `Parse.Query`. This can pose a vulnerability for deployments where the `beforeFind` trigger is used as a security layer to modify the incoming query. The vulnerability has been fixed by refactoring the internal query pipeline for a more concise code structure and implementing a patch to ensure the `beforeFind` trigger is invoked. This fix was introduced in commit `be4c7e23c6` and has been included in releases 6.2.2 and 5.5.5. Users are advised to upgrade. Users unable to upgrade should make use of parse server's security layers to manage access levels with Class-Level Permissions and Object-Level Access Control that should be used instead of custom security layers in Cloud Code triggers. |
| CVE-2023-40691 | IBM Cloud Pak for Business Automation 18.0.0, 18.0.1, 18.0.2, 19.0.1, 19.0.2, 19.0.3, 20.0.1, 20.0.2, 20.0.3, 21.0.1, 21.0.2, 21.0.3, 22.0.1, and 22.0.2 may reveal sensitive information contained in application configuration to developer and administrator users. IBM X-Force ID: 264805. |
| CVE-2023-39963 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 20.0.0 and prior to versions 20.0.14.15, 21.0.9.13, 22.2.10.14, 23.0.12.8, 24.0.12.5, 25.0.9, 26.0.4, and 27.0.1, a missing password confirmation allowed an attacker, after successfully stealing a session from a logged in user, to create app passwords for the victim. Nextcloud server versions 25.0.9, 26.0.4, and 27.0.1 and Nextcloud Enterprise Server versions 20.0.14.15, 21.0.9.13, 22.2.10.14, 23.0.12.9, 24.0.12.5, 25.0.9, 26.0.4, and 27.0.1 contain a patch for this issue. No known workarounds are available. |
| CVE-2023-39962 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 19.0.0 and prior to versions 19.0.13.10, 20.0.14.15, 21.0.9.13, 22.2.10.14, 23.0.12.8, 24.0.12.5, 25.0.9, 26.0.4, and 27.0.1, a malicious user could delete any personal or global external storage, making them inaccessible for everyone else as well. Nextcloud server versions 25.0.9, 26.0.4, and 27.0.1 and Nextcloud Enterprise Server versions 19.0.13.10, 20.0.14.15, 21.0.9.13, 22.2.10.14, 23.0.12.9, 24.0.12.5, 25.0.9, 26.0.4, and 27.0.1 contain a patch for this issue. As a workaround, disable app files_external. This also makes the external storage inaccessible but retains the configurations until a patched version has been deployed. |
| CVE-2023-39961 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 24.0.4 and prior to versions 25.0.9, 26.0.4, and 27.0.1, when a folder with images or an image was shared without download permissions, the user could add the image inline into a text file and download it. Nextcloud Server versions 25.0.9, 26.0.4, and 27.0.1 and Nextcloud Enterprise Server versions 24.0.12.5, 25.0.9, 26.0.4, and 27.0.1 contain a patch for this issue. No known workarounds are available. |
| CVE-2023-39960 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. In Nextcloud Server starting with 25.0.0 and prior to 25.09 and 26.04; as well as Nextcloud Enterprise Server starting with 22.0.0 and prior to 22.2.10.14, 23.0.12.9, 24.0.12.5, 25.0.9, and 26.0.4; missing protection allows an attacker to brute force passwords on the WebDAV API. Nextcloud Server 25.0.9 and 26.0.4 and Nextcloud Enterprise Server 22.2.10.14, 23.0.12.9, 24.0.12.5, 25.0.9, and 26.0.4 contain patches for this issue. No known workarounds are available. |
| CVE-2023-39959 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 25.0.0 and prior to versions 25.0.9, 26.0.4, and 27.0.1, unauthenticated users could send a DAV request which reveals whether a calendar or an address book with the given identifier exists for the victim. Nextcloud Server versions 25.0.9, 26.0.4, and 27.0.1 and Nextcloud Enterprise Server versions 25.0.9, 26.0.4, and 27.0.1 contain a patch for this issue. No known workarounds are available. |
| CVE-2023-39958 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 22.0.0 and prior to versions 22.2.10.13, 23.0.12.8, 24.0.12.5, 25.0.9, 26.0.4, and 27.0.1, missing protection allows an attacker to brute force the client secrets of configured OAuth2 clients. Nextcloud Server versions 25.0.9, 26.0.4, and 27.0.1 and Nextcloud Enterprise Server versions 22.2.10.13, 23.0.12.8, 24.0.12.5, 25.0.9, 26.0.4, and 27.0.1 contain a patch for this issue. No known workarounds are available. |
| CVE-2023-39955 | Notes is a note-taking app for Nextcloud, an open-source cloud platform. Starting in version 4.4.0 and prior to version 4.8.0, when creating a note file with HTML, the content is rendered in the preview instead of the file being offered to download. Nextcloud Notes app version 4.8.0 contains a patch for the issue. No known workarounds are available. |
| CVE-2023-39954 | user_oidc provides the OIDC connect user backend for Nextcloud, an open-source cloud platform. Starting in version 1.0.0 and prior to version 1.3.3, an attacker that obtained at least read access to a snapshot of the database can impersonate the Nextcloud server towards linked servers. user_oidc 1.3.3 contains a patch. No known workarounds are available. |
| CVE-2023-39953 | user_oidc provides the OIDC connect user backend for Nextcloud, an open-source cloud platform. Starting in version 1.0.0 and prior to version 1.3.3, missing verification of the issuer would have allowed an attacker to perform a man-in-the-middle attack returning corrupted or known token they also have access to. user_oidc 1.3.3 contains a patch. No known workarounds are available. |
| CVE-2023-39952 | Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. Starting in version 22.0.0 and prior to versions 22.2.10.13, 23.0.12.8, 24.0.12.4, 25.0.8, 26.0.3, and 27.0.1, a user can access files inside a subfolder of a groupfolder accessible to them, even if advanced permissions would block access to the subfolder. Nextcloud Server versions 25.0.8, 26.0.3, and 27.0.1 and Nextcloud Enterprise Server versions 22.2.10.13, 23.0.12.8, 24.0.12.4, 25.0.8, 26.0.3, and 27.0.1 contain a patch for this issue. No known workarounds are available. |
| CVE-2023-39520 | Cryptomator encrypts data being stored on cloud infrastructure. The MSI installer provided on the homepage for Cryptomator version 1.9.2 allows local privilege escalation for low privileged users, via the `repair` function. The problem occurs as the repair function of the MSI is spawning an SYSTEM Powershell without the `-NoProfile` parameter. Therefore the profile of the user starting the repair will be loaded. Version 1.9.3 contains a fix for this issue. Adding a `-NoProfile` to the powershell is a possible workaround. |
| CVE-2023-39519 | Cloud Explorer Lite is an open source cloud management platform. Prior to version 1.4.0, there is a risk of sensitive information leakage in the user information acquisition of CloudExplorer Lite. The vulnerability has been fixed in version 1.4.0. |
| CVE-2023-3950 | An information disclosure issue in GitLab EE affecting all versions from 16.2 prior to 16.2.5, and 16.3 prior to 16.3.1 allowed other Group Owners to see the Public Key for a Google Cloud Logging audit event streaming destination, if configured. Owners can now only write the key, not read it. |
| CVE-2023-39439 | SAP Commerce Cloud may accept an empty passphrase for user ID and passphrase authentication, allowing users to log into the system without a passphrase. |
| CVE-2023-39348 | Spinnaker is an open source, multi-cloud continuous delivery platform. Log output when updating GitHub status is improperly set to FULL always. It's recommended to apply the patch and rotate the GitHub token used for github status notifications. Given that this would output github tokens to a log system, the risk is slightly higher than a "low" since token exposure could grant elevated access to repositories outside of control. If using READ restricted tokens, the exposure is such that the token itself could be used to access resources otherwise restricted from reads. This only affects users of GitHub Status Notifications. This issue has been addressed in pull request 1316. Users are advised to upgrade. Users unable to upgrade should disable GH Status Notifications, Filter their logs for Echo log data and use read-only tokens that are limited in scope. |
| CVE-2023-39341 | "FFRI yarai", "FFRI yarai Home and Business Edition" and their OEM products handle exceptional conditions improperly, which may lead to denial-of-service (DoS) condition. Affected products and versions are as follows: FFRI yarai versions 3.4.0 to 3.4.6 and 3.5.0, FFRI yarai Home and Business Edition version 1.4.0, InfoTrace Mark II Malware Protection (Mark II Zerona) versions 3.0.1 to 3.2.2, Zerona / Zerona PLUS versions 3.2.32 to 3.2.36, ActSecure χ versions 3.4.0 to 3.4.6 and 3.5.0, Dual Safe Powered by FFRI yarai version 1.4.1, EDR Plus Pack (Bundled FFRI yarai versions 3.4.0 to 3.4.6 and 3.5.0), and EDR Plus Pack Cloud (Bundled FFRI yarai versions 3.4.0 to 3.4.6 and 3.5.0). |
| CVE-2023-38942 | Dango-Translator v4.5.5 was discovered to contain a remote command execution (RCE) vulnerability via the component app/config/cloud_config.json. |
| CVE-2023-38735 | IBM Cognos Dashboards on Cloud Pak for Data 4.7.0 could allow a remote attacker to bypass security restrictions, caused by a reverse tabnabbing flaw. An attacker could exploit this vulnerability and redirect a victim to a phishing site. IBM X-Force ID: 262482. |
| CVE-2023-38692 | CloudExplorer Lite is an open source, lightweight cloud management platform. Versions prior to 1.3.1 contain a command injection vulnerability in the installation function in module management. The vulnerability has been fixed in v1.3.1. There are no known workarounds aside from upgrading. |
| CVE-2023-38495 | Crossplane is a framework for building cloud native control planes without needing to write code. In versions prior to 1.11.5, 1.12.3, and 1.13.0, Crossplane's image backend does not validate the byte contents of Crossplane packages. As such, Crossplane does not detect if an attacker has tampered with a Package. The problem has been fixed in 1.11.5, 1.12.3 and 1.13.0. As a workaround, only use images from trusted sources and keep Package editing/creating privileges to administrators only. |
| CVE-2023-38494 | MeterSphere is an open-source continuous testing platform. Prior to version 2.10.4 LTS, some interfaces of the Cloud version of MeterSphere do not have configuration permissions, and are sensitively leaked by attackers. Version 2.10.4 LTS contains a patch for this issue. |
| CVE-2023-38367 | IBM Cloud Pak Foundational Services Identity Provider (idP) API (IBM Cloud Pak for Automation 18.0.0, 18.0.1, 18.0.2, 19.0.1, 19.0.2, 19.0.3, 20.0.1, 20.0.2, 20.0.3, 21.0.1, 21.0.2, 21.0.3, 22.0.1, and 22.0.2) allows CRUD Operations with an invalid token. This could allow an unauthenticated attacker to view, update, delete or create an IdP configuration. IBM X-Force ID: 261130. |
| CVE-2023-38276 | IBM Cognos Dashboards on Cloud Pak for Data 4.7.0 exposes sensitive information in environment variables which could aid in further attacks against the system. IBM X-Force ID: 260736. |
| CVE-2023-38275 | IBM Cognos Dashboards on Cloud Pak for Data 4.7.0 exposes sensitive information in container images which could lead to further attacks against the system. IBM X-Force ID: 260730. |
| CVE-2023-38273 | IBM Cloud Pak System 2.3.1.1, 2.3.2.0, and 2.3.3.7 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 260733. |
| CVE-2023-37948 | Jenkins Oracle Cloud Infrastructure Compute Plugin 1.0.16 and earlier does not validate SSH host keys when connecting OCI clouds, enabling man-in-the-middle attacks. |
| CVE-2023-37918 | Dapr is a portable, event-driven, runtime for building distributed applications across cloud and edge. A vulnerability has been found in Dapr that allows bypassing API token authentication, which is used by the Dapr sidecar to authenticate calls coming from the application, with a well-crafted HTTP request. Users who leverage API token authentication are encouraged to upgrade Dapr to 1.10.9 or to 1.11.2. This vulnerability impacts Dapr users who have configured API token authentication. An attacker could craft a request that is always allowed by the Dapr sidecar over HTTP, even if the `dapr-api-token` in the request is invalid or missing. The issue has been fixed in Dapr 1.10.9 or to 1.11.2. There are no known workarounds for this vulnerability. |
| CVE-2023-37907 | Cryptomator is data encryption software for users who store their files in the cloud. Prior to version 1.9.2, the MSI installer provided on the homepage allows local privilege escalation (LPE) for low privileged users, if already installed. The problem occurs as the repair function of the MSI spawns two administrative CMDs. A simple LPE is possible via a breakout. Version 1.9.2 fixes this issue. |
| CVE-2023-37900 | Crossplane is a framework for building cloud native control planes without needing to write code. In versions prior to 1.11.5, 1.12.3, and 1.13.0, a high-privileged user could create a Package referencing an arbitrarily large image containing that Crossplane would then parse, possibly resulting in exhausting all the available memory and therefore in the container being OOMKilled. The impact is limited due to the high privileges required to be able to create the Package and the eventually consistency nature of controller. This issue is fixed in versions 1.11.5, 1.12.3, and 1.13.0. |
| CVE-2023-37537 | An unquoted service path vulnerability in HCL AppScan Presence, deployed as a Windows service in HCL AppScan on Cloud (ASoC), may allow a local attacker to gain elevated privileges. |
| CVE-2023-37486 | Under certain conditions SAP Commerce (OCC API) - versions HY_COM 2105, HY_COM 2205, COM_CLOUD 2211, endpoints allow an attacker to access information which would otherwise be restricted. On successful exploitation there could be a high impact on confidentiality with no impact on integrity and availability of the application. |
| CVE-2023-37469 | CasaOS is an open-source personal cloud system. Prior to version 0.4.4, if an authenticated user using CasaOS is able to successfully connect to a controlled SMB server, they are able to execute arbitrary commands. Version 0.4.4 contains a patch for the issue. |
| CVE-2023-37266 | CasaOS is an open-source Personal Cloud system. Unauthenticated attackers can craft arbitrary JWTs and access features that usually require authentication and execute arbitrary commands as `root` on CasaOS instances. This problem was addressed by improving the validation of JWTs in commit `705bf1f`. This patch is part of CasaOS 0.4.4. Users should upgrade to CasaOS 0.4.4. If they can't, they should temporarily restrict access to CasaOS to untrusted users, for instance by not exposing it publicly. |
| CVE-2023-37265 | CasaOS is an open-source Personal Cloud system. Due to a lack of IP address verification an unauthenticated attackers can execute arbitrary commands as `root` on CasaOS instances. The problem was addressed by improving the detection of client IP addresses in `391dd7f`. This patch is part of CasaOS 0.4.4. Users should upgrade to CasaOS 0.4.4. If they can't, they should temporarily restrict access to CasaOS to untrusted users, for instance by not exposing it publicly. |
| CVE-2023-37262 | CC: Tweaked is a mod for Minecraft which adds programmable computers, turtles, and more to the game. Prior to versions 1.20.1-1.106.0, 1.19.4-1.106.0, 1.19.2-1.101.3, 1.18.2-1.101.3, and 1.16.5-1.101.3, if the cc-tweaked plugin is running on a Minecraft server hosted on a popular cloud hosting providers, like AWS, GCP, and Azure, those metadata services API endpoints are not forbidden (aka "blacklisted") by default. As such, any player can gain access to sensitive information exposed via those metadata servers, potentially allowing them to pivot or privilege escalate into the hosting provider. Versions 1.20.1-1.106.0, 1.19.4-1.106.0, 1.19.2-1.101.3, 1.18.2-1.101.3, and 1.16.5-1.101.3 contain a fix for this issue. |
| CVE-2023-37261 | OpenComputers is a Minecraft mod that adds programmable computers and robots to the game. This issue affects every version of OpenComputers with the Internet Card feature enabled; that is, OpenComputers 1.2.0 until 1.8.3 in their most common, default configurations. If the OpenComputers mod is installed as part of a Minecraft server hosted on a popular cloud hosting provider, such as AWS, GCP and Azure, those metadata services' API endpoints are not forbidden (aka "blacklisted") by default. As such, any player can gain access to sensitive information exposed via those metadata servers, potentially allowing them to pivot or privilege escalate into the hosting provider. In addition, IPv6 addresses are not correctly filtered at all, allowing broader access into the local IPv6 network. This can allow a player on a server using an OpenComputers computer to access parts of the private IPv4 address space, as well as the whole IPv6 address space, in order to retrieve sensitive information. OpenComputers v1.8.3 for Minecraft 1.7.10 and 1.12.2 contains a patch for this issue. Some workarounds are also available. One may disable the Internet Card feature completely. If using OpenComputers 1.3.0 or above, using the allow list (`opencomputers.internet.whitelist` option) will prohibit connections to any IP addresses and/or domains not listed; or one may add entries to the block list (`opencomputers.internet.blacklist` option). More information about mitigations is available in the GitHub Security Advisory. |
| CVE-2023-3701 | Aqua Drive, in its 2.4 version, is vulnerable to a relative path traversal vulnerability. By exploiting this vulnerability, an authenticated non privileged user could access/modify stored resources of other users. It could also be possible to access and modify the source and configuration files of the cloud disk platform, affecting the integrity and availability of the entire platform. |
| CVE-2023-36904 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2023-36843 | An Improper Handling of Inconsistent Special Elements vulnerability in the Junos Services Framework (jsf) module of Juniper Networks Junos OS allows an unauthenticated network based attacker to cause a crash in the Packet Forwarding Engine (pfe) and thereby resulting in a Denial of Service (DoS). Upon receiving malformed SSL traffic, the PFE crashes. A manual restart will be needed to recover the device. This issue only affects devices with Juniper Networks Advanced Threat Prevention (ATP) Cloud enabled with Encrypted Traffic Insights (configured via ‘security-metadata-streaming policy’). This issue affects Juniper Networks Junos OS: * All versions prior to 20.4R3-S8, 20.4R3-S9; * 21.1 version 21.1R1 and later versions; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S5; * 22.1 versions prior to 22.1R3-S4; * 22.2 versions prior to 22.2R3-S2; * 22.3 versions prior to 22.3R2-S2, 22.3R3; * 22.4 versions prior to 22.4R2-S1, 22.4R3; |
| CVE-2023-36815 | Sealos is a Cloud Operating System designed for managing cloud-native applications. In version 4.2.0 and prior, there is a permission flaw in the Sealos billing system, which allows users to control the recharge resource account `sealos[.] io/v1/Payment`, resulting in the ability to recharge any amount of 1 renminbi (RMB). The charging interface may expose resource information. The namespace of this custom resource would be user's control and may have permission to correct it. It is not clear whether a fix exists. |
| CVE-2023-36696 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2023-36036 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2023-35948 | Novu provides an API for sending notifications through multiple channels. Versions prior to 0.16.0 contain an open redirect vulnerability in the "Sign In with GitHub" functionality of Novu's open-source repository. It could have allowed an attacker to force a victim into opening a malicious URL and thus, potentially log into the repository under the victim's account gaining full control of the account. This vulnerability only affected the Novu Cloud and Open-Source deployments if the user manually enabled the GitHub OAuth on their self-hosted instance of Novu. Users should upgrade to version 0.16.0 to receive a patch. |
| CVE-2023-35945 | Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy’s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11. |
| CVE-2023-35944 | Envoy is an open source edge and service proxy designed for cloud-native applications. Envoy allows mixed-case schemes in HTTP/2, however, some internal scheme checks are case-sensitive. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, this can lead to the rejection of requests with mixed-case schemes such as `htTp` or `htTps`, or the bypassing of some requests such as `https` in unencrypted connections. With a fix in versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, Envoy will now lowercase scheme values by default, and change the internal scheme checks that were case-sensitive to be case-insensitive. There are no known workarounds for this issue. |
| CVE-2023-35943 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, the CORS filter will segfault and crash Envoy when the `origin` header is removed and deleted between `decodeHeaders`and `encodeHeaders`. Versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12 have a fix for this issue. As a workaround, do not remove the `origin` header in the Envoy configuration. |
| CVE-2023-35942 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, gRPC access loggers using listener's global scope can cause a `use-after-free` crash when the listener is drained. Versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12 have a fix for this issue. As a workaround, disable gRPC access log or stop listener update. |
| CVE-2023-35941 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, a malicious client is able to construct credentials with permanent validity in some specific scenarios. This is caused by the some rare scenarios in which HMAC payload can be always valid in OAuth2 filter's check. Versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12 have a fix for this issue. As a workaround, avoid wildcards/prefix domain wildcards in the host's domain configuration. |
| CVE-2023-35900 | IBM Robotic Process Automation for Cloud Pak 21.0.0 through 21.0.7.4 and 23.0.0 through 23.0.5 is vulnerable to disclosing server version information which may be used to determine software vulnerabilities at the operating system level. IBM X-Force ID: 259368. |
| CVE-2023-35899 | IBM Cloud Pak for Automation 18.0.0, 18.0.1, 18.0.2, 19.0.1, 19.0.2, 19.0.3, 20.0.1, 20.0.2, 20.0.3, 21.0.1, 21.0.2, 21.0.3, 22.0.1, and 22.0.2 is potentially vulnerable to CSV Injection. A remote attacker could execute arbitrary commands on the system, caused by improper validation of csv file contents. IBM X-Force ID: 259354. |
| CVE-2023-3589 | A Cross-Site Request Forgery (CSRF) vulnerability affecting Teamwork Cloud from No Magic Release 2021x through No Magic Release 2022x could allow with some very specific conditions an attacker to send a specifically crafted query to the server. |
| CVE-2023-3588 | A stored Cross-site Scripting (XSS) vulnerability affecting Teamwork Cloud from No Magic Release 2021x through No Magic Release 2022x allows an attacker to execute arbitrary script code. |
| CVE-2023-35785 | Zoho ManageEngine Active Directory 360 versions 4315 and below, ADAudit Plus 7202 and below, ADManager Plus 7200 and below, Asset Explorer 6993 and below and 7xxx 7002 and below, Cloud Security Plus 4161 and below, Data Security Plus 6110 and below, Eventlog Analyzer 12301 and below, Exchange Reporter Plus 5709 and below, Log360 5315 and below, Log360 UEBA 4045 and below, M365 Manager Plus 4529 and below, M365 Security Plus 4529 and below, Recovery Manager Plus 6061 and below, ServiceDesk Plus 14204 and below and 143xx 14302 and below, ServiceDesk Plus MSP 14300 and below, SharePoint Manager Plus 4402 and below, and Support Center Plus 14300 and below are vulnerable to 2FA bypass via a few TOTP authenticators. Note: A valid pair of username and password is required to leverage this vulnerability. |
| CVE-2023-3569 | In PHOENIX CONTACTs TC ROUTER and TC CLOUD CLIENT in versions prior to 2.07.2 as well as CLOUD CLIENT 1101T-TX/TX prior to 2.06.10 an authenticated remote attacker with admin privileges could upload a crafted XML file which causes a denial-of-service. |
| CVE-2023-35355 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2023-3526 | In PHOENIX CONTACTs TC ROUTER and TC CLOUD CLIENT in versions prior to 2.07.2 as well as CLOUD CLIENT 1101T-TX/TX prior to 2.06.10 an unauthenticated remote attacker could use a reflective XSS within the license viewer page of the devices in order to execute code in the context of the user's browser. |
| CVE-2023-35165 | AWS Cloud Development Kit (AWS CDK) is an open-source software development framework to define cloud infrastructure in code and provision it through AWS CloudFormation. In the packages `aws-cdk-lib` 2.0.0 until 2.80.0 and `@aws-cdk/aws-eks` 1.57.0 until 1.202.0, `eks.Cluster` and `eks.FargateCluster` constructs create two roles, `CreationRole` and `default MastersRole`, that have an overly permissive trust policy. The first, referred to as the `CreationRole`, is used by lambda handlers to create the cluster and deploy Kubernetes resources (e.g `KubernetesManifest`, `HelmChart`, ...) onto it. Users with CDK version higher or equal to 1.62.0 (including v2 users) may be affected. The second, referred to as the `default MastersRole`, is provisioned only if the `mastersRole` property isn't provided and has permissions to execute `kubectl` commands on the cluster. Users with CDK version higher or equal to 1.57.0 (including v2 users) may be affected. The issue has been fixed in `@aws-cdk/aws-eks` v1.202.0 and `aws-cdk-lib` v2.80.0. These versions no longer use the account root principal. Instead, they restrict the trust policy to the specific roles of lambda handlers that need it. There is no workaround available for CreationRole. To avoid creating the `default MastersRole`, use the `mastersRole` property to explicitly provide a role. |
| CVE-2023-35024 | IBM Cloud Pak for Business Automation 18.0.0, 18.0.1, 18.0.2, 19.0.1, 19.0.2, 19.0.3, 20.0.1, 20.0.2, 20.0.3, 21.0.1, 21.0.2, 21.0.3, 22.0.1, and 22.0.2 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 258349. |
| CVE-2023-34735 | Property Cloud Platform Management Center 1.0 is vulnerable to error-based SQL injection. |
| CVE-2023-34357 | Soar Cloud Ltd. HR Portal has a weak Password Recovery Mechanism for Forgotten Password. The reset password link sent out through e-mail, and the link will remain valid after the password has been reset and after the expected expiration date. An attacker with access to the browser history or has the line can thus use the URL again to change the password in order to take over the account. |
| CVE-2023-34240 | Cloudexplorer-lite is an open source cloud software stack. Weak passwords can be easily guessed and are an easy target for brute force attacks. This can lead to an authentication system failure and compromise system security. Versions of cloudexplorer-lite prior to 1.2.0 did not enforce strong passwords. This vulnerability has been fixed in version 1.2.0. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-34061 | Cloud Foundry routing release versions from v0.163.0 to v0.283.0 are vulnerable to a DOS attack. An unauthenticated attacker can use this vulnerability to force route pruning and therefore degrade the service availability of the Cloud Foundry deployment. |
| CVE-2023-34060 | VMware Cloud Director Appliance contains an authentication bypass vulnerability in case VMware Cloud Director Appliance was upgraded to 10.5 from an older version. On an upgraded version of VMware Cloud Director Appliance 10.5, a malicious actor with network access to the appliance can bypass login restrictions when authenticating on port 22 (ssh) or port 5480 (appliance management console) . This bypass is not present on port 443 (VCD provider and tenant login). On a new installation of VMware Cloud Director Appliance 10.5, the bypass is not present. VMware Cloud Director Appliance is impacted since it uses an affected version of sssd from the underlying Photon OS. The sssd issue is no longer present in versions of Photon OS that ship with sssd-2.8.1-11 or higher (Photon OS 3) or sssd-2.8.2-9 or higher (Photon OS 4 and 5). |
| CVE-2023-34041 | Cloud foundry routing release versions prior to 0.278.0 are vulnerable to abuse of HTTP Hop-by-Hop Headers. An unauthenticated attacker can use this vulnerability for headers like B3 or X-B3-SpanID to affect the identification value recorded in the logs in foundations. |
| CVE-2023-33873 | This privilege escalation vulnerability, if exploited, cloud allow a local OS-authenticated user with standard privileges to escalate to System privilege on the machine where these products are installed, resulting in complete compromise of the target machine. |
| CVE-2023-33754 | The captive portal in Inpiazza Cloud WiFi versions prior to v4.2.17 does not enforce limits on the number of attempts for password recovery, allowing attackers to brute force valid user accounts to gain access to login credentials. |
| CVE-2023-33740 | Incorrect access control in luowice v3.5.18 allows attackers to access cloud source code information via modification fo the Verify parameter in a warning message. |
| CVE-2023-33190 | Sealos is an open source cloud operating system distribution based on the Kubernetes kernel. In versions of Sealos prior to 4.2.1-rc4 an improper configuration of role based access control (RBAC) permissions resulted in an attacker being able to obtain cluster control permissions, which could control the entire cluster deployed with Sealos, as well as hundreds of pods and other resources within the cluster. This issue has been addressed in version 4.2.1-rc4. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-33155 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2023-33012 | A command injection vulnerability in the configuration parser of the Zyxel ATP series firmware versions 5.10 through 5.36 Patch 2, USG FLEX series firmware versions 5.00 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 5.10 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 5.10 through 5.36 Patch 2, and VPN series firmware versions 5.00 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands by using a crafted GRE configuration when the cloud management mode is enabled. |
| CVE-2023-33011 | A format string vulnerability in the Zyxel ATP series firmware versions 5.10 through 5.36 Patch 2, USG FLEX series firmware versions 5.00 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 5.10 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 5.10 through 5.36 Patch 2, and VPN series firmware versions 5.00 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands by using a crafted PPPoE configuration on an affected device when the cloud management mode is enabled. |
| CVE-2023-32990 | A missing permission check in Jenkins Azure VM Agents Plugin 852.v8d35f0960a_43 and earlier allows attackers with Overall/Read permission to connect to an attacker-specified Azure Cloud server using attacker-specified credentials IDs obtained through another method. |
| CVE-2023-32989 | A cross-site request forgery (CSRF) vulnerability in Jenkins Azure VM Agents Plugin 852.v8d35f0960a_43 and earlier allows attackers to connect to an attacker-specified Azure Cloud server using attacker-specified credentials IDs obtained through another method. |
| CVE-2023-32764 | Fabasoft Cloud Enterprise Client 23.3.0.130 allows a user to escalate their privileges to local administrator. |
| CVE-2023-32717 | On Splunk Enterprise versions below 9.0.5, 8.2.11, and 8.1.14, and in Splunk Cloud Platform versions below 9.0.2303.100, an unauthorized user can access the {{/services/indexing/preview}} REST endpoint to overwrite search results if they know the search ID (SID) of an existing search job. |
| CVE-2023-32716 | In Splunk Enterprise versions below 9.0.5, 8.2.11, and 8.1.14, and Splunk Cloud Platform versions below 9.0.2303.100, an attacker can exploit a vulnerability in the {{dump}} SPL command to cause a denial of service by crashing the Splunk daemon. |
| CVE-2023-32710 | In Splunk Enterprise versions below 9.0.5, 8.2.11, and 8.1.14, and in Splunk Cloud Platform versions below 9.0.2303.100, a low-privileged user can perform an unauthorized transfer of data from a search using the ‘copyresults’ command if they know the search ID (SID) of a search job that has recently run. |
| CVE-2023-32709 | In Splunk Enterprise versions below 9.0.5, 8.2.11. and 8.1.14, and Splunk Cloud Platform versions below 9.0.2303.100, a low-privileged user who holds the ‘user’ role can see the hashed version of the initial user name and password for the Splunk instance by using the ‘rest’ SPL command against the ‘conf-user-seed’ REST endpoint. |
| CVE-2023-32708 | In Splunk Enterprise versions below 9.0.5, 8.2.11, and 8.1.14, and Splunk Cloud Platform versions below 9.0.2303.100, a low-privileged user can trigger an HTTP response splitting vulnerability with the ‘rest’ SPL command that lets them potentially access other REST endpoints in the system arbitrarily. |
| CVE-2023-32707 | In versions of Splunk Enterprise below 9.0.5, 8.2.11, and 8.1.14, and Splunk Cloud Platform below version 9.0.2303.100, a low-privileged user who holds a role that has the ‘edit_user’ capability assigned to it can escalate their privileges to that of the admin user by providing specially crafted web requests. |
| CVE-2023-32591 | Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Cloud Primero B.V DBargain plugin <= 3.0.0 versions. |
| CVE-2023-32346 | Teltonika’s Remote Management System versions prior to 4.10.0 contain a function that allows users to claim their devices. This function returns information based on whether the serial number of a device has already been claimed, the MAC address of a device has already been claimed, or whether the attempt to claim a device was successful. An attacker could exploit this to create a list of the serial numbers and MAC addresses of all devices cloud-connected to the Remote Management System. |
| CVE-2023-32319 | Nextcloud server is an open source personal cloud implementation. Missing brute-force protection on the WebDAV endpoints via the basic auth header allowed to brute-force user credentials when the provided user name was not an email address. Users from version 24.0.0 onward are affected. This issue has been addressed in releases 24.0.11, 25.0.5 and 26.0.0. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-32316 | CloudExplorer Lite is an open source cloud management tool. In affected versions users can add themselves to any organization in CloudExplorer Lite. This is due to a missing permission check on the user profile. It is recommended to upgrade the version to v1.1.0. There are no known workarounds for this vulnerability. |
| CVE-2023-32311 | CloudExplorer Lite is an open source cloud management platform. In CloudExplorer Lite prior to version 1.1.0 users organization/workspace permissions are not properly checked. This allows users to add themselves to any organization. This vulnerability has been fixed in v1.1.0. Users are advised to upgrade. There are no known workarounds for this issue. |
| CVE-2023-32260 | Misinterpretation of Input vulnerability in OpenText™ Service Management Automation X (SMAX), OpenText™ Asset Management X (AMX), and OpenText™ Hybrid Cloud Management X (HCMX) products. The vulnerability could allow Input data manipulation.This issue affects Service Management Automation X (SMAX) versions: 2020.05, 2020.08, 2020.11, 2021.02, 2021.05, 2021.08, 2021.11, 2022.05, 2022.11, 2023.05; Asset Management X (AMX) versions: 2021.08, 2021.11, 2022.05, 2022.11, 2023.05; and Hybrid Cloud Management X (HCMX) versions: 2020.05, 2020.08, 2020.11, 2021.02, 2021.05, 2021.08, 2021.11, 2022.05, 2022.11, 2023.05. |
| CVE-2023-31997 | UniFi OS 3.1 introduces a misconfiguration on consoles running UniFi Network that allows users on a local network to access MongoDB. Applicable Cloud Keys that are both (1) running UniFi OS 3.1 and (2) hosting the UniFi Network application. "Applicable Cloud Keys" include the following: Cloud Key Gen2 and Cloud Key Gen2 Plus. |
| CVE-2023-31579 | Dromara Lamp-Cloud before v3.8.1 was discovered to use a hardcoded cryptographic key when creating and verifying a Json Web Token. This vulnerability allows attackers to authenticate to the application via a crafted JWT token. |
| CVE-2023-31245 | Devices using Snap One OvrC cloud are sent to a web address when accessing a web management interface using a HTTP connection. Attackers could impersonate a device and supply malicious information about the device’s web server interface. By supplying malicious parameters, an attacker could redirect the user to arbitrary and dangerous locations on the web. |
| CVE-2023-31241 | Snap One OvrC cloud servers contain a route an attacker can use to bypass requirements and claim devices outright. |
| CVE-2023-31240 | Snap One OvrC Pro versions prior to 7.2 have their own locally running web server accessible both from the local network and remotely. OvrC cloud contains a hidden superuser account accessible through hard-coded credentials. |
| CVE-2023-30993 | IBM Cloud Pak for Security (CP4S) 1.9.0.0 through 1.9.2.0 could allow an attacker with a valid API key for one tenant to access data from another tenant's account. IBM X-Force ID: 254136. |
| CVE-2023-30612 | Cloud hypervisor is a Virtual Machine Monitor for Cloud workloads. This vulnerability allows users to close arbitrary open file descriptors in the Cloud Hypervisor process via sending malicious HTTP request through the HTTP API socket. As a result, the Cloud Hypervisor process can be easily crashed, causing Deny-of-Service (DoS). This can also be a potential Use-After-Free (UAF) vulnerability. Users require to have the write access to the API socket file to trigger this vulnerability. Impacted versions of Cloud Hypervisor include upstream main branch, v31.0, and v30.0. The vulnerability was initially detected by our `http_api_fuzzer` via oss-fuzz. This issue has been addressed in versions 30.1 and 31.1. Users unable to upgrade may mitigate this issue by ensuring the write access to the API socket file is granted to trusted users only. |
| CVE-2023-30610 | aws-sigv4 is a rust library for low level request signing in the aws cloud platform. The `aws_sigv4::SigningParams` struct had a derived `Debug` implementation. When debug-formatted, it would include a user's AWS access key, AWS secret key, and security token in plaintext. When TRACE-level logging is enabled for an SDK, `SigningParams` is printed, thereby revealing those credentials to anyone with access to logs. All users of the AWS SDK for Rust who enabled TRACE-level logging, either globally (e.g. `RUST_LOG=trace`), or for the `aws-sigv4` crate specifically are affected. This issue has been addressed in a set of new releases. Users are advised to upgrade. Users unable to upgrade should disable TRACE-level logging for AWS Rust SDK crates. |
| CVE-2023-30444 | IBM Watson Machine Learning on Cloud Pak for Data 4.0 and 4.5 is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks. IBM X-Force ID: 253350. |
| CVE-2023-29930 | An issue was found in Genesys CIC Polycom phone provisioning TFTP Server all version allows a remote attacker to execute arbitrary code via the login crednetials to the TFTP server configuration page. |
| CVE-2023-29361 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2023-29128 | A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1). The filename in the upload feature of the web based management of the affected device is susceptible to a path traversal vulnerability. This could allow an authenticated privileged remote attacker to write any file with the extension `.db`. |
| CVE-2023-29107 | A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1). The export endpoint discloses some undocumented files. This could allow an unauthenticated remote attacker to gain access to additional information resources. |
| CVE-2023-29106 | A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1). The export endpoint is accessible via REST API without authentication. This could allow an unauthenticated remote attacker to download the files available via the endpoint. |
| CVE-2023-29105 | A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC712 (All versions < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions < V2.1). The affected device is vulnerable to a denial of service while parsing a random (non-JSON) MQTT payload. This could allow an attacker who can manipulate the communication between the MQTT broker and the affected device to cause a denial of service (DoS). |
| CVE-2023-29104 | A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1). The filename in the upload feature of the web based management of the affected device is susceptible to a path traversal vulnerability. This could allow an authenticated privileged remote attacker to overwrite any file the Linux user `ccuser` has write access to, or to download any file the Linux user `ccuser` has read-only access to. |
| CVE-2023-29103 | A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC712 (All versions < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions < V2.1). The affected device uses a hard-coded password to protect the diagnostic files. This could allow an authenticated attacker to access protected data. |
| CVE-2023-29010 | Budibase is a low code platform for creating internal tools, workflows, and admin panels. Versions prior to 2.4.3 (07 March 2023) are vulnerable to Server-Side Request Forgery. This can lead to an attacker gaining access to a Budibase AWS secret key. Users of Budibase cloud need to take no action. Self-host users who run Budibase on the public internet and are using a cloud provider that allows HTTP access to metadata information should ensure that when they deploy Budibase live, their internal metadata endpoint is not exposed. |
| CVE-2023-28995 | Cross-Site Request Forgery (CSRF) vulnerability in Keith Solomon Configurable Tag Cloud (CTC) plugin <= 5.2 versions. |
| CVE-2023-28958 | IBM Watson Knowledge Catalog on Cloud Pak for Data 4.0 is potentially vulnerable to CSV Injection. A remote attacker could execute arbitrary commands on the system, caused by improper validation of csv file contents. IBM X-Force ID: 251782. |
| CVE-2023-28955 | IBM Watson Knowledge Catalog on Cloud Pak for Data 4.0 could allow an authenticated user send a specially crafted request that could cause a denial of service. IBM X-Force ID: 251704. |
| CVE-2023-28953 | IBM Cognos Analytics on Cloud Pak for Data 4.0 could allow an attacker to make system calls that might compromise the security of the containers due to misconfigured security context. IBM X-Force ID: 251465. |
| CVE-2023-28901 | The Skoda Automotive cloud contains a Broken Access Control vulnerability, allowing remote attackers to obtain recent trip data, vehicle mileage, fuel consumption, average and maximum speed, and other information of Skoda Connect service users by specifying an arbitrary vehicle VIN number. |
| CVE-2023-28900 | The Skoda Automotive cloud contains a Broken Access Control vulnerability, allowing to obtain nicknames and other user identifiers of Skoda Connect service users by specifying an arbitrary vehicle VIN number. |
| CVE-2023-28844 | Nextcloud server is an open source home cloud implementation. In affected versions users that should not be able to download a file can still download an older version and use that for uncontrolled distribution. This issue has been addressed in versions 24.0.10 and 25.0.4. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-28835 | Nextcloud server is an open source home cloud implementation. In affected versions the generated fallback password when creating a share was using a weak complexity random number generator, so when the sharer did not change it the password could be guessable to an attacker willing to brute force it. It is recommended that the Nextcloud Server is upgraded to 24.0.10 or 25.0.4. This issue only affects users who do not have a password policy enabled, so enabling a password policy is an effective mitigation for users unable to upgrade. |
| CVE-2023-28834 | Nextcloud Server is an open source personal cloud server. Nextcloud Server 24.0.0 until 24.0.6 and 25.0.0 until 25.0.4, as well as Nextcloud Enterprise Server 23.0.0 until 23.0.11, 24.0.0 until 24.0.6, and 25.0.0 until 25.0.4, have an information disclosure vulnerability. A user was able to get the full data directory path of the Nextcloud server from an API endpoint. By itself this information is not problematic as it can also be guessed for most common setups, but it could speed up other unknown attacks in the future if the information is known. Nextcloud Server 24.0.6 and 25.0.4 and Nextcloud Enterprise Server 23.0.11, 24.0.6, and 25.0.4 contain patches for this issue. There are no known workarounds. |
| CVE-2023-28833 | Nextcloud server is an open source home cloud implementation. In affected versions admins of a server were able to upload a logo or a favicon and to provided a file name which was not restricted and could overwrite files in the appdata directory. Administrators may have access to overwrite these files by other means but this method could be exploited by tricking an admin into uploading a maliciously named file. It is recommended that the Nextcloud Server is upgraded to 24.0.10 or 25.0.4. Users unable to upgrade should avoid ingesting logo files from untrusted sources. |
| CVE-2023-28832 | A vulnerability has been identified in SIMATIC Cloud Connect 7 CC712 (All versions >= V2.0 < V2.1), SIMATIC Cloud Connect 7 CC716 (All versions >= V2.0 < V2.1). The web based management of affected devices does not properly validate user input, making it susceptible to command injection. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges. |
| CVE-2023-28767 | The configuration parser fails to sanitize user-controlled input in the Zyxel ATP series firmware versions 5.10 through 5.36, USG FLEX series firmware versions 5.00 through 5.36, USG FLEX 50(W) series firmware versions 5.10 through 5.36, USG20(W)-VPN series firmware versions 5.10 through 5.36, and VPN series firmware versions 5.00 through 5.36. An unauthenticated, LAN-based attacker could leverage the vulnerability to inject some operating system (OS) commands into the device configuration data on an affected device when the cloud management mode is enabled. |
| CVE-2023-28649 | The Hub in the Snap One OvrC cloud platform is a device used to centralize and manage nested devices connected to it. A vulnerability exists in which an attacker could impersonate a hub and send device requests to claim already claimed devices. The OvrC cloud platform receives the requests but does not validate if the found devices are already managed by another user. |
| CVE-2023-28647 | Nextcloud iOS is an ios application used to interface with the nextcloud home cloud ecosystem. In versions prior to 4.7.0 when an attacker has physical access to an unlocked device, they may enable the integration into the iOS Files app and bypass the Nextcloud pin/password protection and gain access to a users files. It is recommended that the Nextcloud iOS app is upgraded to 4.7.0. There are no known workarounds for this vulnerability. |
| CVE-2023-28644 | Nextcloud server is an open source home cloud implementation. In releases of the 25.0.x branch before 25.0.3 an inefficient fetch operation may impact server performances and/or can lead to a denial of service. This issue has been addressed and it is recommended that the Nextcloud Server is upgraded to 25.0.3. There are no known workarounds for this vulnerability. |
| CVE-2023-28643 | Nextcloud server is an open source home cloud implementation. In affected versions when a recipient receives 2 shares with the same name, while a memory cache is configured, the second share will replace the first one instead of being renamed to `{name} (2)`. It is recommended that the Nextcloud Server is upgraded to 25.0.3 or 24.0.9. Users unable to upgrade should avoid sharing 2 folders with the same name to the same user. |
| CVE-2023-28434 | Minio is a Multi-Cloud Object Storage framework. Prior to RELEASE.2023-03-20T20-16-18Z, an attacker can use crafted requests to bypass metadata bucket name checking and put an object into any bucket while processing `PostPolicyBucket`. To carry out this attack, the attacker requires credentials with `arn:aws:s3:::*` permission, as well as enabled Console API access. This issue has been patched in RELEASE.2023-03-20T20-16-18Z. As a workaround, enable browser API access and turn off `MINIO_BROWSER=off`. |
| CVE-2023-28433 | Minio is a Multi-Cloud Object Storage framework. All users on Windows prior to version RELEASE.2023-03-20T20-16-18Z are impacted. MinIO fails to filter the `\` character, which allows for arbitrary object placement across buckets. As a result, a user with low privileges, such as an access key, service account, or STS credential, which only has permission to `PutObject` in a specific bucket, can create an admin user. This issue is patched in RELEASE.2023-03-20T20-16-18Z. There are no known workarounds. |
| CVE-2023-28432 | Minio is a Multi-Cloud Object Storage framework. In a cluster deployment starting with RELEASE.2019-12-17T23-16-33Z and prior to RELEASE.2023-03-20T20-16-18Z, MinIO returns all environment variables, including `MINIO_SECRET_KEY` and `MINIO_ROOT_PASSWORD`, resulting in information disclosure. All users of distributed deployment are impacted. All users are advised to upgrade to RELEASE.2023-03-20T20-16-18Z. |
| CVE-2023-28412 | When supplied with a random MAC address, Snap One OvrC cloud servers will return information about the device. The MAC address of devices can be enumerated in an attack and the OvrC cloud will disclose their information. |
| CVE-2023-28361 | A Cross-site WebSocket Hijacking (CSWSH) vulnerability found in UniFi OS 2.5 and earlier allows a malicious actor to access certain confidential information by persuading a UniFi OS user to visit a malicious webpage.Affected Products:Cloud Key Gen2Cloud Key Gen2 PlusUNVRUNVR ProfessionalUDMUDM ProfessionalUDM SEUDRMitigation:Update affected products to UniFi OS 3.0.13 or later. |
| CVE-2023-2818 | An insecure filesystem permission in the Insider Threat Management Agent for Windows enables local unprivileged users to disrupt agent monitoring. All versions prior to 7.14.3 are affected. Agents for MacOS and Linux and Cloud are unaffected. |
| CVE-2023-28166 | Unauth. Reflected Cross-Site Scripting (XSS) vulnerability in Aakif Kadiwala Tags Cloud Manager plugin <= 1.0.0 versions. |
| CVE-2023-28143 | Qualys Cloud Agent for macOS (versions 2.5.1-75 before 3.7) installer allows a local escalation of privilege bounded only to the time of installation and only on older macOSX (macOS 10.15 and older) versions. Attackers may exploit incorrect file permissions to give them ROOT command execution privileges on the host. During the install of the PKG, a step in the process involves extracting the package and copying files to several directories. Attackers may gain writable access to files during the install of PKG when extraction of the package and copying files to several directories, enabling a local escalation of privilege. |
| CVE-2023-28142 | A Race Condition exists in the Qualys Cloud Agent for Windows platform in versions from 3.1.3.34 and before 4.5.3.1. This allows attackers to escalate privileges limited on the local machine during uninstallation of the Qualys Cloud Agent for Windows. Attackers may gain SYSTEM level privileges on that asset to run arbitrary commands. At the time of this disclosure, versions before 4.0 are classified as End of Life. |
| CVE-2023-28141 | An NTFS Junction condition exists in the Qualys Cloud Agent for Windows platform in versions before 4.8.0.31. Attackers may write files to arbitrary locations via a local attack vector. This allows attackers to assume the privileges of the process, and they may delete or otherwise on unauthorized files, allowing for the potential modification or deletion of sensitive files limited only to that specific directory/file object. This vulnerability is bounded to the time of installation/uninstallation and can only be exploited locally. At the time of this disclosure, versions before 4.0 are classified as End of Life. |
| CVE-2023-28140 | An Executable Hijacking condition exists in the Qualys Cloud Agent for Windows platform in versions before 4.5.3.1. Attackers may load a malicious copy of a Dependency Link Library (DLL) via a local attack vector instead of the DLL that the application was expecting, when processes are running with escalated privileges. This vulnerability is bounded only to the time of uninstallation and can only be exploited locally. At the time of this disclosure, versions before 4.0 are classified as End of Life. |
| CVE-2023-27877 | IBM Planning Analytics Cartridge for Cloud Pak for Data 4.0 connects to a CouchDB server. An attacker can exploit an insecure password policy to the CouchDB server and collect sensitive information from the database. IBM X-Force ID: 247905. |
| CVE-2023-27589 | Minio is a Multi-Cloud Object Storage framework. Starting with RELEASE.2020-12-23T02-24-12Z and prior to RELEASE.2023-03-13T19-46-17Z, a user with `consoleAdmin` permissions can potentially create a user that matches the root credential `accessKey`. Once this user is created successfully, the root credential ceases to work appropriately. The issue is patched in RELEASE.2023-03-13T19-46-17Z. There are ways to work around this via adding higher privileges to the disabled root user via `mc admin policy set`. |
| CVE-2023-27588 | Hasura is an open-source product that provides users GraphQL or REST APIs. A path traversal vulnerability has been discovered within Hasura GraphQL Engine prior to versions 1.3.4, 2.55.1, 2.20.1, and 2.21.0-beta1. Projects running on Hasura Cloud were not vulnerable. Self-hosted Hasura Projects with deployments that are publicly exposed and not protected by a WAF or other HTTP protection layer should be upgraded to version 1.3.4, 2.55.1, 2.20.1, or 2.21.0-beta1 to receive a patch. |
| CVE-2023-27587 | ReadtoMyShoe, a web app that lets users upload articles and listen to them later, generates an error message containing sensitive information prior to commit 8533b01. If an error occurs when adding an article, the website shows the user an error message. If the error originates from the Google Cloud TTS request, then it will include the full URL of the request. The request URL contains the Google Cloud API key. This has been patched in commit 8533b01. Upgrading should be accompanied by deleting the current GCP API key and issuing a new one. There are no known workarounds. |
| CVE-2023-27496 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the OAuth filter assumes that a `state` query param is present on any response that looks like an OAuth redirect response. Sending it a request with the URI path equivalent to the redirect path, without the `state` parameter, will lead to abnormal termination of Envoy process. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 contain a patch. The issue can also be mitigated by locking down OAuth traffic, disabling the filter, or by filtering traffic before it reaches the OAuth filter (e.g. via a lua script). |
| CVE-2023-27493 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy does not sanitize or escape request properties when generating request headers. This can lead to characters that are illegal in header values to be sent to the upstream service. In the worst case, it can cause upstream service to interpret the original request as two pipelined requests, possibly bypassing the intent of Envoy’s security policy. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 contain a patch. As a workaround, disable adding request headers based on the downstream request properties, such as downstream certificate properties. |
| CVE-2023-27492 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the Lua filter is vulnerable to denial of service. Attackers can send large request bodies for routes that have Lua filter enabled and trigger crashes. As of versions versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy no longer invokes the Lua coroutine if the filter has been reset. As a workaround for those whose Lua filter is buffering all requests/ responses, mitigate by using the buffer filter to avoid triggering the local reply in the Lua filter. |
| CVE-2023-27491 | Envoy is an open source edge and service proxy designed for cloud-native applications. Compliant HTTP/1 service should reject malformed request lines. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, There is a possibility that non compliant HTTP/1 service may allow malformed requests, potentially leading to a bypass of security policies. This issue is fixed in versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9. |
| CVE-2023-27488 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, escalation of privileges is possible when `failure_mode_allow: true` is configured for `ext_authz` filter. For affected components that are used for logging and/or visibility, requests may not be logged by the receiving service. When Envoy was configured to use ext_authz, ext_proc, tap, ratelimit filters, and grpc access log service and an http header with non-UTF-8 data was received, Envoy would generate an invalid protobuf message and send it to the configured service. The receiving service would typically generate an error when decoding the protobuf message. For ext_authz that was configured with ``failure_mode_allow: true``, the request would have been allowed in this case. For the other services, this could have resulted in other unforeseen errors such as a lack of visibility into requests. As of versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy by default sanitizes the values sent in gRPC service calls to be valid UTF-8, replacing data that is not valid UTF-8 with a `!` character. This behavioral change can be temporarily reverted by setting runtime guard `envoy.reloadable_features.service_sanitize_non_utf8_strings` to false. As a workaround, one may set `failure_mode_allow: false` for `ext_authz`. |
| CVE-2023-27487 | Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the client may bypass JSON Web Token (JWT) checks and forge fake original paths. The header `x-envoy-original-path` should be an internal header, but Envoy does not remove this header from the request at the beginning of request processing when it is sent from an untrusted client. The faked header would then be used for trace logs and grpc logs, as well as used in the URL used for `jwt_authn` checks if the `jwt_authn` filter is used, and any other upstream use of the x-envoy-original-path header. Attackers may forge a trusted `x-envoy-original-path` header. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 have patches for this issue. |
| CVE-2023-26482 | Nextcloud server is an open source home cloud implementation. In affected versions a missing scope validation allowed users to create workflows which are designed to be only available for administrators. Some workflows are designed to be RCE by invoking defined scripts, in order to generate PDFs, invoking webhooks or running scripts on the server. Due to this combination depending on the available apps the issue can result in a RCE at the end. It is recommended that the Nextcloud Server is upgraded to 24.0.10 or 25.0.4. Users unable to upgrade should disable app `workflow_scripts` and `workflow_pdf_converter` as a mitigation. |
| CVE-2023-26358 | Creative Cloud version 5.9.1 (and earlier) is affected by an Untrusted Search Path vulnerability that might allow attackers to execute their own programs, access unauthorized data files, or modify configuration in unexpected ways. If the application uses a search path to locate critical resources such as programs, then an attacker could modify that search path to point to a malicious program, which the targeted application would then execute. The problem extends to any type of critical resource that the application trusts. |
| CVE-2023-26316 | A XSS vulnerability exists in the Xiaomi cloud service Application product. The vulnerability is caused by Webview's whitelist checking function allowing javascript protocol to be loaded and can be exploited by attackers to steal Xiaomi cloud service account's cookies. |
| CVE-2023-26292 | Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Forcepoint Cloud Security Gateway (CSG) Portal on Web Cloud Security Gateway, Email Security Cloud (login_submit.mhtml modules), Forcepoint Web Security Portal on Hybrid (login_submit.mhtml modules) allows Reflected XSS.This issue affects Cloud Security Gateway (CSG): before 03/29/2023; Web Security: before 03/29/2023. |
| CVE-2023-26291 | Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Forcepoint Cloud Security Gateway (CSG) Portal on Web Cloud Security Gateway, Email Security Cloud (login_form.mhtml modules), Forcepoint Web Security Portal on Hybrid (login_form.mhtml modules) allows Reflected XSS.This issue affects Cloud Security Gateway (CSG): before 03/29/2023; Web Security: before 03/29/2023. |
| CVE-2023-26290 | Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Forcepoint Cloud Security Gateway (CSG) Portal on Web Cloud Security Gateway, Email Security Cloud (login_reset_request.mhtml modules), Forcepoint Web Security Portal on Hybrid (login_reset_request.mhtml modules) allows Reflected XSS.This issue affects Cloud Security Gateway (CSG): before 03/29/2023; Web Security: before 03/29/2023. |
| CVE-2023-26272 | IBM Security Guardium Data Encryption (IBM Guardium Cloud Key Manager (GCKM) 1.10.3)) could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 248133. |
| CVE-2023-26271 | IBM Security Guardium Data Encryption (IBM Guardium Cloud Key Manager (GCKM) 1.10.3)) uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 248126. |
| CVE-2023-26270 | IBM Security Guardium Data Encryption (IBM Guardium Cloud Key Manager (GCKM) 1.10.3)) could allow a remote attacker to execute arbitrary code on the system, caused by an angular template injection flaw. By sending specially crafted request, an attacker could exploit this vulnerability to execute arbitrary code on the system. IBM X-Force ID: 248119. |
| CVE-2023-26261 | In UBIKA WAAP Gateway/Cloud through 6.10, a blind XPath injection leads to an authentication bypass by stealing the session of another connected user. The fixed versions are WAAP Gateway & Cloud 6.11.0 and 6.5.6-patch15. |
| CVE-2023-26026 | Planning Analytics Cartridge for Cloud Pak for Data 4.0 exposes sensitive information in logs which could lead an attacker to exploit this vulnerability to conduct further attacks. IBM X-Force ID: 247896. |
| CVE-2023-26024 | IBM Planning Analytics on Cloud Pak for Data 4.0 could allow an attacker on a shared network to obtain sensitive information caused by insecure network communication. IBM X-Force ID: 247898. |
| CVE-2023-26023 | Planning Analytics Cartridge for Cloud Pak for Data 4.0 exposes sensitive information in logs which could lead an attacker to exploit this vulnerability to conduct further attacks. IBM X-Force ID: 247896. |
| CVE-2023-2588 | Teltonika’s Remote Management System versions prior to 4.10.0 have a feature allowing users to access managed devices’ local secure shell (SSH)/web management services over the cloud proxy. A user can request a web proxy and obtain a URL in the Remote Management System cloud subdomain. This URL could be shared with others without Remote Management System authentication . An attacker could exploit this vulnerability to create a malicious webpage that uses a trusted and certified domain. An attacker could initiate a reverse shell when a victim connects to the malicious webpage, achieving remote code execution on the victim device. |
| CVE-2023-25821 | Nextcloud is an Open Source private cloud software. Versions 24.0.4 and above, prior to 24.0.7, and 25.0.0 and above, prior to 25.0.1, contain Improper Access Control. Secure view for internal shares can be circumvented if reshare permissions are also given. This issue is patched in versions 24.0.7 and 25.0.1. No workaround is available. |
| CVE-2023-25818 | Nextcloud server is an open source, personal cloud implementation. In affected versions a malicious user could try to reset the password of another user and then brute force the 62^21 combinations for the password reset token. As of commit `704eb3aa` password reset attempts are now throttled. Note that 62^21 combinations would significant compute resources to brute force. None the less it is recommended that the Nextcloud Server is upgraded to 24.0.10 or 25.0.4. There are no known workarounds for this vulnerability. |
| CVE-2023-25817 | Nextcloud server is an open source, personal cloud implementation. In versions from 24.0.0 and before 24.0.9 a user could escalate their permissions to delete files they were not supposed to deletable but only viewed or downloaded. This issue has been addressed andit is recommended that the Nextcloud Server is upgraded to 24.0.9. There are no known workarounds for this vulnerability. |
| CVE-2023-25816 | Nextcloud is an Open Source private cloud software. Versions 25.0.0 and above, prior to 25.0.3, are subject to Uncontrolled Resource Consumption. A user can configure a very long password, consuming more resources on password validation than desired. This issue is patched in 25.0.3 No workaround is available. |
| CVE-2023-25812 | Minio is a Multi-Cloud Object Storage framework. Affected versions do not correctly honor a `Deny` policy on ByPassGoverance. Ideally, minio should return "Access Denied" to all users attempting to DELETE a versionId with the special header `X-Amz-Bypass-Governance-Retention: true`. However, this was not honored instead the request will be honored and an object under governance would be incorrectly deleted. All users are advised to upgrade. There are no known workarounds for this issue. |
| CVE-2023-25722 | A credential-leak issue was discovered in related Veracode products before 2023-03-27. Veracode Scan Jenkins Plugin before 23.3.19.0, when configured for remote agent jobs, invokes the Veracode Java API Wrapper in a manner that allows local users (with OS-level access of the Jenkins remote) to discover Veracode API credentials by listing the process and its arguments. Veracode Scan Jenkins Plugin before 23.3.19.0, when configured for remote agent jobs and when the "Connect using proxy" option is enabled and configured with proxy credentials, allows local users of the Jenkins remote to discover proxy credentials by listing the process and its arguments. Veracode Azure DevOps Extension before 3.20.0 invokes the Veracode Java API Wrapper in a manner that allows local users (with OS-level access to the Azure DevOps Services cloud infrastructure or Azure DevOps Server) to discover Veracode API credentials by listing the process and its arguments. Veracode Azure DevOps Extension before 3.20.0, when configured with proxy credentials, allows users (with shell access to the Azure DevOps Services cloud infrastructure or Azure DevOps Server) to discover proxy credentials by listing the process and its arguments. |
| CVE-2023-25661 | TensorFlow is an Open Source Machine Learning Framework. In versions prior to 2.11.1 a malicious invalid input crashes a tensorflow model (Check Failed) and can be used to trigger a denial of service attack. A proof of concept can be constructed with the `Convolution3DTranspose` function. This Convolution3DTranspose layer is a very common API in modern neural networks. The ML models containing such vulnerable components could be deployed in ML applications or as cloud services. This failure could be potentially used to trigger a denial of service attack on ML cloud services. An attacker must have privilege to provide input to a `Convolution3DTranspose` call. This issue has been patched and users are advised to upgrade to version 2.11.1. There are no known workarounds for this vulnerability. |
| CVE-2023-25579 | Nextcloud server is a self hosted home cloud product. In affected versions the `OC\Files\Node\Folder::getFullPath()` function was validating and normalizing the string in the wrong order. The function is used in the `newFile()` and `newFolder()` items, which may allow to creation of paths outside of ones own space and overwriting data from other users with crafted paths. This issue has been addressed in versions 25.0.2, 24.0.8, and 23.0.12. Users are advised to upgrade. There are no known workarounds for this issue. |
| CVE-2023-25149 | TimescaleDB, an open-source time-series SQL database, has a privilege escalation vulnerability in versions 2.8.0 through 2.9.2. During installation, TimescaleDB creates a telemetry job that is runs as the installation user. The queries run as part of the telemetry data collection were not run with a locked down `search_path`, allowing malicious users to create functions that would be executed by the telemetry job, leading to privilege escalation. In order to be able to take advantage of this vulnerability, a user would need to be able to create objects in a database and then get a superuser to install TimescaleDB into their database. When TimescaleDB is installed as trusted extension, non-superusers can install the extension without help from a superuser. Version 2.9.3 fixes this issue. As a mitigation, the `search_path` of the user running the telemetry job can be locked down to not include schemas writable by other users. The vulnerability is not exploitable on instances in Timescale Cloud and Managed Service for TimescaleDB due to additional security provisions in place on those platforms. |
| CVE-2023-23925 | Switcher Client is a JavaScript SDK to work with Switcher API which is cloud-based Feature Flag. Unsanitized input flows into Strategy match operation (EXIST), where it is used to build a regular expression. This may result in a Regular expression Denial of Service attack (reDOS). This issue has been patched in version 3.1.4. As a workaround, avoid using Strategy settings that use REGEX in conjunction with EXIST and NOT_EXIST operations. |
| CVE-2023-23917 | A prototype pollution vulnerability exists in Rocket.Chat server <5.2.0 that could allow an attacker to a RCE under the admin account. Any user can create their own server in your cloud and become an admin so this vulnerability could affect the cloud infrastructure. This attack vector also may increase the impact of XSS to RCE which is dangerous for self-hosted users as well. |
| CVE-2023-23690 | Cloud Mobility for Dell EMC Storage, versions 1.3.0.X and below contains an Improper Check for Certificate Revocation vulnerability. A threat actor does not need any specific privileges to potentially exploit this vulnerability. An attacker could perform a man-in-the-middle attack and eavesdrop on encrypted communications from Cloud Mobility to Cloud Storage devices. Exploitation could lead to the compromise of secret and sensitive information, cloud storage connection downtime, and the integrity of the connection to the Cloud devices. |
| CVE-2023-23468 | IBM Robotic Process Automation for Cloud Pak 21.0.1 through 21.0.7.3 and 23.0.0 through 23.0.3 is vulnerable to insufficient security configuration which may allow creation of namespaces within a cluster. IBM X-Force ID: 244500. |
| CVE-2023-23208 | Genesys Administrator Extension (GAX) before 9.0.105.15 is vulnerable to Cross Site Scripting (XSS) via the Business Structure page of the iWD plugin, aka GAX-11261. |
| CVE-2023-22916 | The configuration parser of Zyxel ATP series firmware versions 5.10 through 5.35, USG FLEX series firmware versions 5.00 through 5.35, USG FLEX 50(W) firmware versions 5.10 through 5.35, USG20(W)-VPN firmware versions 5.10 through 5.35, and VPN series firmware versions 5.00 through 5.35, which fails to properly sanitize user input. A remote unauthenticated attacker could leverage the vulnerability to modify device configuration data, resulting in DoS conditions on an affected device if the attacker could trick an authorized administrator to switch the management mode to the cloud mode. |
| CVE-2023-22860 | IBM Cloud Pak for Business Automation 18.0.0, 18.0.1, 18.0.2, 19.0.1, 19.0.2, 19.0.3, 20.0.1, 20.0.2, 20.0.3, 21.0.1, 21.0.2, 21.0.3, 22.0.1, and 22.0.2 is vulnerable to stored cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 244100. |
| CVE-2023-22819 | An uncontrolled resource consumption vulnerability issue that could arise by sending crafted requests to a service to consume a large amount of memory, eventually resulting in the service being stopped and restarted was discovered in Western Digital My Cloud Home, My Cloud Home Duo, SanDisk ibi and Western Digital My Cloud OS 5 devices. This issue requires the attacker to already have root privileges in order to exploit this vulnerability. This issue affects My Cloud Home and My Cloud Home Duo: before 9.5.1-104; ibi: before 9.5.1-104; My Cloud OS 5: before 5.27.161. |
| CVE-2023-22817 | Server-side request forgery (SSRF) vulnerability that could allow a rogue server on the local network to modify its URL using another DNS address to point back to the loopback adapter. This could then allow the URL to exploit other vulnerabilities on the local server. This was addressed by fixing DNS addresses that refer to loopback. This issue affects My Cloud OS 5 devices before 5.27.161, My Cloud Home, My Cloud Home Duo and SanDisk ibi devices before 9.5.1-104. |
| CVE-2023-22816 | A post-authentication remote command injection vulnerability in a CGI file in Western Digital My Cloud OS 5 devices that could allow an attacker to build files with redirects and execute larger payloads. This issue affects My Cloud OS 5 devices: before 5.26.300. |
| CVE-2023-22815 | Post-authentication remote command injection vulnerability in Western Digital My Cloud OS 5 devices that could allow an attacker to execute code in the context of the root user on vulnerable CGI files. This vulnerability can only be exploited over the network and the attacker must already have admin/root privileges to carry out the exploit. An authentication bypass is required for this exploit, thereby making it more complex. The attack may not require user interaction. Since an attacker must already be authenticated, the confidentiality impact is low while the integrity and availability impact is high. This issue affects My Cloud OS 5 devices: before 5.26.300. |
| CVE-2023-22814 | An authentication bypass issue via spoofing was discovered in the token-based authentication mechanism that could allow an attacker to carry out an impersonation attack. This issue affects My Cloud OS 5 devices: before 5.26.202. |
| CVE-2023-22813 | A device API endpoint was missing access controls on Western Digital My Cloud OS 5 iOS and Anroid Mobile Apps, My Cloud Home iOS and Android Mobile Apps, SanDisk ibi iOS and Android Mobile Apps, My Cloud OS 5 Web App, My Cloud Home Web App and the SanDisk ibi Web App. Due to a permissive CORS policy and missing authentication requirement for private IPs, a remote attacker on the same network as the device could obtain device information by convincing a victim user to visit an attacker-controlled server and issue a cross-site request. This issue affects My Cloud OS 5 Mobile App: before 4.21.0; My Cloud Home Mobile App: before 4.21.0; ibi Mobile App: before 4.21.0; My Cloud OS 5 Web App: before 4.26.0-6126; My Cloud Home Web App: before 4.26.0-6126; ibi Web App: before 4.26.0-6126. |
| CVE-2023-22601 | InHand Networks InRouter 302, prior to version IR302 V3.5.56, and InRouter 615, prior to version InRouter6XX-S-V2.3.0.r5542, contain vulnerability CWE-330: Use of Insufficiently Random Values. They do not properly randomize MQTT ClientID parameters. An unauthorized user could calculate this parameter and use it to gather additional information about other InHand devices managed on the same cloud platform. |
| CVE-2023-22599 | InHand Networks InRouter 302, prior to version IR302 V3.5.56, and InRouter 615, prior to version InRouter6XX-S-V2.3.0.r5542, contain vulnerability CWE-760: Use of a One-way Hash with a Predictable Salt. They send MQTT credentials in response to HTTP/HTTPS requests from the cloud platform. These credentials are encoded using a hardcoded string into an MD5 hash. This string could be easily calculated by an unauthorized user who spoofed sending an HTTP/HTTPS request to the devices. This could result in the affected devices being temporarily disconnected from the cloud platform and allow the user to receive MQTT commands with potentially sensitive information. |
| CVE-2023-22598 | InHand Networks InRouter 302, prior to version IR302 V3.5.56, and InRouter 615, prior to version InRouter6XX-S-V2.3.0.r5542, contain vulnerability CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection'). An unauthorized user with privileged access to the local web interface or the cloud account managing the affected devices could push a specially crafted configuration update file to gain root access. This could lead to remote code execution with root privileges. |
| CVE-2023-22597 | InHand Networks InRouter 302, prior to version IR302 V3.5.56, and InRouter 615, prior to version InRouter6XX-S-V2.3.0.r5542, contain vulnerability CWE-319: Cleartext Transmission of Sensitive Information. They use an unsecured channel to communicate with the cloud platform by default. An unauthorized user could intercept this communication and steal sensitive information such as configuration information and MQTT credentials; this could allow MQTT command injection. |
| CVE-2023-22594 | IBM Robotic Process Automation for Cloud Pak 20.12.0 through 21.0.4 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 244075. |
| CVE-2023-22593 | IBM Robotic Process Automation for Cloud Pak 21.0.1 through 21.0.7.3 and 23.0.0 through 23.0.3 is vulnerable to security misconfiguration of the Redis container which may provide elevated privileges. IBM X-Force ID: 244074. |
| CVE-2023-22592 | IBM Robotic Process Automation for Cloud Pak 21.0.1 through 21.0.4 could allow a local user to perform unauthorized actions due to insufficient permission settings. IBM X-Force ID: 244073. |
| CVE-2023-22522 | This Template Injection vulnerability allows an authenticated attacker, including one with anonymous access, to inject unsafe user input into a Confluence page. Using this approach, an attacker is able to achieve Remote Code Execution (RCE) on an affected instance. Publicly accessible Confluence Data Center and Server versions as listed below are at risk and require immediate attention. See the advisory for additional details Atlassian Cloud sites are not affected by this vulnerability. If your Confluence site is accessed via an atlassian.net domain, it is hosted by Atlassian and is not vulnerable to this issue. |
| CVE-2023-22518 | All versions of Confluence Data Center and Server are affected by this unexploited vulnerability. This Improper Authorization vulnerability allows an unauthenticated attacker to reset Confluence and create a Confluence instance administrator account. Using this account, an attacker can then perform all administrative actions that are available to Confluence instance administrator leading to - but not limited to - full loss of confidentiality, integrity and availability. Atlassian Cloud sites are not affected by this vulnerability. If your Confluence site is accessed via an atlassian.net domain, it is hosted by Atlassian and is not vulnerable to this issue. |
| CVE-2023-22515 | Atlassian has been made aware of an issue reported by a handful of customers where external attackers may have exploited a previously unknown vulnerability in publicly accessible Confluence Data Center and Server instances to create unauthorized Confluence administrator accounts and access Confluence instances. Atlassian Cloud sites are not affected by this vulnerability. If your Confluence site is accessed via an atlassian.net domain, it is hosted by Atlassian and is not vulnerable to this issue. |
| CVE-2023-22344 | Use of hard-coded credentials vulnerability in SS1 Ver.13.0.0.40 and earlier and Rakuraku PC Cloud Agent Ver.2.1.8 and earlier allows a remote attacker to obtain the password of the debug tool and execute it. As a result of exploiting this vulnerability with CVE-2023-22335 and CVE-2023-22336 vulnerabilities together, it may allow a remote attacker to execute an arbitrary code with SYSTEM privileges by sending a specially crafted script to the affected device. |
| CVE-2023-22336 | Path traversal vulnerability in SS1 Ver.13.0.0.40 and earlier and Rakuraku PC Cloud Agent Ver.2.1.8 and earlier allows a remote attacker to upload a specially crafted file to an arbitrary directory. As a result of exploiting this vulnerability with CVE-2023-22335 and CVE-2023-22344 vulnerabilities together, it may allow a remote attacker to execute an arbitrary code with SYSTEM privileges by sending a specially crafted script to the affected device. |
| CVE-2023-22335 | Improper access control vulnerability in SS1 Ver.13.0.0.40 and earlier and Rakuraku PC Cloud Agent Ver.2.1.8 and earlier allows a remote attacker to bypass access restriction and download an arbitrary file of the directory where the product runs. As a result of exploiting this vulnerability with CVE-2023-22336 and CVE-2023-22344 vulnerabilities together, it may allow a remote attacker to execute an arbitrary code with SYSTEM privileges by sending a specially crafted script to the affected device. |
| CVE-2023-22296 | Reflected cross-site scripting vulnerability in MAHO-PBX NetDevancer series MAHO-PBX NetDevancer Lite/Uni/Pro/Cloud prior to Ver.1.11.00, MAHO-PBX NetDevancer VSG Lite/Uni prior to Ver.1.11.00, and MAHO-PBX NetDevancer MobileGate Home/Office prior to Ver.1.11.00 allows a remote unauthenticated attacker to inject an arbitrary script. |
| CVE-2023-22286 | Cross-site request forgery (CSRF) vulnerability in MAHO-PBX NetDevancer Lite/Uni/Pro/Cloud prior to Ver.1.11.00, MAHO-PBX NetDevancer VSG Lite/Uni prior to Ver.1.11.00, and MAHO-PBX NetDevancer MobileGate Home/Office prior to Ver.1.11.00 allows a remote unauthenticated attacker to hijack the user authentication and conduct user's unintended operations by having a user to view a malicious page while logged in. |
| CVE-2023-22280 | MAHO-PBX NetDevancer Lite/Uni/Pro/Cloud prior to Ver.1.11.00, MAHO-PBX NetDevancer VSG Lite/Uni prior to Ver.1.11.00, and MAHO-PBX NetDevancer MobileGate Home/Office prior to Ver.1.11.00 allow a remote authenticated attacker with an administrative privilege to execute an arbitrary OS command. |
| CVE-2023-22279 | MAHO-PBX NetDevancer Lite/Uni/Pro/Cloud prior to Ver.1.11.00, MAHO-PBX NetDevancer VSG Lite/Uni prior to Ver.1.11.00, and MAHO-PBX NetDevancer MobileGate Home/Office prior to Ver.1.11.00 allow a remote unauthenticated attacker to execute an arbitrary OS command. |
| CVE-2023-21448 | Path traversal vulnerability in Samsung Cloud prior to version 5.3.0.32 allows attacker to access specific png file. |
| CVE-2023-21447 | Improper access control vulnerabilities in Samsung Cloud prior to version 5.3.0.32 allows local attackers to access information with Samsung Cloud's privilege via implicit intent. |
| CVE-2023-20903 | This disclosure regards a vulnerability related to UAA refresh tokens and external identity providers.Assuming that an external identity provider is linked to the UAA, a refresh token is issued to a client on behalf of a user from that identity provider, the administrator of the UAA deactivates the identity provider from the UAA. It is expected that the UAA would reject a refresh token during a refresh token grant, but it does not (hence the vulnerability). It will continue to issue access tokens to request presenting such refresh tokens, as if the identity provider was still active. As a result, clients with refresh tokens issued through the deactivated identity provider would still have access to Cloud Foundry resources until their refresh token expires (which defaults to 30 days). |
| CVE-2023-20885 | Vulnerability in Cloud Foundry Notifications, Cloud Foundry SMB-volume release, Cloud FOundry cf-nfs-volume release.This issue affects Notifications: All versions prior to 63; SMB-volume release: All versions prior to 3.1.19; cf-nfs-volume release: 5.0.X versions prior to 5.0.27, 7.1.X versions prior to 7.1.19. |
| CVE-2023-20882 | In Cloud foundry routing release versions from 0.262.0 and prior to 0.266.0,a bug in the gorouter process can lead to a denial of service of applications hosted on Cloud Foundry. Under the right circumstances, when client connections are closed prematurely, gorouter marks the currently selected backend as failed and removes it from the routing pool. |
| CVE-2023-20881 | Cloud foundry instances having CAPI version between 1.140 and 1.152.0 along with loggregator-agent v7+ may override other users syslog drain credentials if they're aware of the client certificate used for that syslog drain. This applies even if the drain has zero certs. This would allow the user to override the private key and add or modify a certificate authority used for the connection. |
| CVE-2023-20873 | In Spring Boot versions 3.0.0 - 3.0.5, 2.7.0 - 2.7.10, and older unsupported versions, an application that is deployed to Cloud Foundry could be susceptible to a security bypass. Users of affected versions should apply the following mitigation: 3.0.x users should upgrade to 3.0.6+. 2.7.x users should upgrade to 2.7.11+. Users of older, unsupported versions should upgrade to 3.0.6+ or 2.7.11+. |
| CVE-2023-2080 | Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Forcepoint Cloud Security Gateway (CSG) Portal on Web Cloud Security Gateway, Email Security Cloud allows Blind SQL Injection. |
| CVE-2023-20044 | A vulnerability in Cisco CX Cloud Agent of could allow an authenticated, local attacker to elevate their privileges. This vulnerability is due to insecure file permissions. An attacker could exploit this vulnerability by persuading support to update settings which call the insecure script. A successful exploit could allow the attacker to take complete control of the affected device. |
| CVE-2023-20043 | A vulnerability in Cisco CX Cloud Agent of could allow an authenticated, local attacker to elevate their privileges. This vulnerability is due to insecure file permissions. An attacker could exploit this vulnerability by calling the script with sudo. A successful exploit could allow the attacker to take complete control of the affected device. |
| CVE-2023-20011 | A vulnerability in the web-based management interface of Cisco Application Policy Infrastructure Controller (APIC) and Cisco Cloud Network Controller, formerly Cisco Cloud APIC, could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. This vulnerability is due to insufficient CSRF protections for the web-based management interface on an affected system. An attacker could exploit this vulnerability by persuading a user of the interface to click a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the affected user. If the affected user has administrative privileges, these actions could include modifying the system configuration and creating new privileged accounts. |
| CVE-2023-1998 | The Linux kernel allows userspace processes to enable mitigations by calling prctl with PR_SET_SPECULATION_CTRL which disables the speculation feature as well as by using seccomp. We had noticed that on VMs of at least one major cloud provider, the kernel still left the victim process exposed to attacks in some cases even after enabling the spectre-BTI mitigation with prctl. The same behavior can be observed on a bare-metal machine when forcing the mitigation to IBRS on boot command line. This happened because when plain IBRS was enabled (not enhanced IBRS), the kernel had some logic that determined that STIBP was not needed. The IBRS bit implicitly protects against cross-thread branch target injection. However, with legacy IBRS, the IBRS bit was cleared on returning to userspace, due to performance reasons, which disabled the implicit STIBP and left userspace threads vulnerable to cross-thread branch target injection against which STIBP protects. |
| CVE-2023-1786 | Sensitive data could be exposed in logs of cloud-init before version 23.1.2. An attacker could use this information to find hashed passwords and possibly escalate their privilege. |
| CVE-2023-1597 | The tagDiv Cloud Library WordPress plugin before 2.7 does not have authorisation and CSRF in an AJAX action accessible to both unauthenticated and authenticated users, allowing unauthenticated users to change arbitrary user metadata, which could lead to privilege escalation by setting themselves as an admin of the blog. |
| CVE-2023-0421 | The Cloud Manager WordPress plugin through 1.0 does not sanitise and escape the query param ricerca before outputting it in an admin panel, allowing unauthenticated attackers to trick a logged in admin to trigger a XSS payload by clicking a link. |
| CVE-2023-0347 | The Akuvox E11 Media Access Control (MAC) address, a primary identifier, combined with the Akuvox E11 IP address, could allow an attacker to identify the device on the Akuvox cloud. |
| CVE-2023-0346 | Akuvox E11 cloud login is performed through an unencrypted HTTP connection. An attacker could gain access to the Akuvox cloud and device if the MAC address of a device if known. |
| CVE-2022-4945 | The Dataprobe cloud usernames and passwords are stored in plain text in a specific file. Any user able to read this specific file from the device could compromise other devices connected to the user's cloud. |
| CVE-2022-47512 | Sensitive information was stored in plain text in a file that is accessible by a user with a local account in Hybrid Cloud Observability (HCO)/ SolarWinds Platform 2022.4. No other versions are affected |
| CVE-2022-46157 | Akeneo PIM is an open source Product Information Management (PIM). Akeneo PIM Community Edition versions before v5.0.119 and v6.0.53 allows remote authenticated users to execute arbitrary PHP code on the server by uploading a crafted image. Akeneo PIM Community Edition after the versions aforementioned provides patched Apache HTTP server configuration file, for docker setup and in documentation sample, to fix this vulnerability. Community Edition users must change their Apache HTTP server configuration accordingly to be protected. The patch for Cloud Based Akeneo PIM Services customers has been applied since 30th October 2022. Users are advised to upgrade. Users unable to upgrade may Replace any reference to `<FilesMatch \.php$>` in their apache httpd configurations with: `<Location "/index.php">`. |
| CVE-2022-45588 | All versions before R2022-09 of Talend's Remote Engine Gen 2 are potentially vulnerable to XML External Entity (XXE) type of attacks. Users should download the R2022-09 release or later and use it in place of the previous version. Talend Remote Engine Gen 1 and Talend Cloud Engine for Design are not impacted. This XXE vulnerability could only be exploited by someone with the appropriate rights to edit pipelines on the Talend platform. It could not be triggered remotely or by other user input. |
| CVE-2022-43901 | IBM WebSphere Automation for IBM Cloud Pak for Watson AIOps 1.4.3 could disclose sensitive information. An authenticated local attacker could exploit this vulnerability to possibly gain information to other IBM WebSphere Automation for IBM Cloud Pak for Watson AIOps components. IBM X-Force ID: 240829. |
| CVE-2022-43900 | IBM WebSphere Automation for IBM Cloud Pak for Watson AIOps 1.4.2 could provide a weaker than expected security. A local attacker can create an outbound network connection to another system. IBM X-Force ID: 240827. |
| CVE-2022-43844 | IBM Robotic Process Automation for Cloud Pak 20.12 through 21.0.3 is vulnerable to broken access control. A user is not correctly redirected to the platform log out screen when logging out of IBM RPA for Cloud Pak. IBM X-Force ID: 239081. |
| CVE-2022-43549 | Improper authentication in Veeam Backup for Google Cloud v1.0 and v3.0 allows attackers to bypass authentication mechanisms. |
| CVE-2022-4348 | A vulnerability was found in y_project RuoYi-Cloud. It has been rated as problematic. Affected by this issue is some unknown functionality of the component JSON Handler. The manipulation leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-215108. |
| CVE-2022-43462 | Auth. SQL Injection (SQLi) vulnerability in Adeel Ahmed's IP Blacklist Cloud plugin <= 5.00 versions. |
| CVE-2022-42462 | Auth. Stored Cross-Site Scripting (XSS) vulnerability in Adeel Ahmed's IP Blacklist Cloud plugin <= 5.00 versions. |
| CVE-2022-42442 | IBM Robotic Process Automation for Cloud Pak 21.0.1, 21.0.2, 21.0.3, 21.0.4, and 21.0.5 is vulnerable to exposure of the first tenant owner e-mail address to users with access to the container platform. IBM X-Force ID: 238214. |
| CVE-2022-42438 | IBM Cloud Pak for Multicloud Management Monitoring 2.0 and 2.3 allows users without admin roles access to admin functions by specifying direct URL paths. IBM X-Force ID: 238210. |
| CVE-2022-42150 | TinyLab linux-lab v1.1-rc1 and cloud-labv0.8-rc2, v1.1-rc1 are vulnerable to insecure permissions. The default configuration could cause Container Escape. |
| CVE-2022-41990 | Cross-Site Request Forgery (CSRF) vulnerability in Vinoj Cardoza 3D Tag Cloud allows Stored XSS.This issue affects 3D Tag Cloud: from n/a through 3.8. |
| CVE-2022-41970 | Nextcloud Server is an open source personal cloud server. Prior to versions 24.0.7 and 25.0.1, disabled download shares still allow download through preview images. Images could be downloaded and previews of documents (first page) can be downloaded without being watermarked. Versions 24.0.7 and 25.0.1 contain a fix for this issue. No known workarounds are available. |
| CVE-2022-41969 | Nextcloud Server is an open source personal cloud server. Prior to versions 23.0.11, 24.0.7, and 25.0.0, there is no password length limit when creating a user as an administrator. An administrator can cause a limited DoS attack against their own server. Versions 23.0.11, 24.0.7, and 25.0.0 contain a fix for the issue. As a workaround, don't create user accounts with long passwords. |
| CVE-2022-41968 | Nextcloud Server is an open source personal cloud server. Prior to versions 23.0.10 and 24.0.5, calendar name lengths are not validated before writing to a database. As a result, an attacker can send unnecessary amounts of data against the database. Version 23.0.10 and 24.0.5 contain patches for the issue. No known workarounds are available. |
| CVE-2022-41879 | Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. In versions prior to 5.3.3 or 4.10.20, a compromised Parse Server Cloud Code Webhook target endpoint allows an attacker to use prototype pollution to bypass the Parse Server `requestKeywordDenylist` option. This issue has been patched in versions 5.3.3 and 4.10.20. There are no known workarounds. |
| CVE-2022-41878 | Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. In versions prior to 5.3.2 or 4.10.19, keywords that are specified in the Parse Server option `requestKeywordDenylist` can be injected via Cloud Code Webhooks or Triggers. This will result in the keyword being saved to the database, bypassing the `requestKeywordDenylist` option. This issue is fixed in versions 4.10.19, and 5.3.2. If upgrade is not possible, the following Workarounds may be applied: Configure your firewall to only allow trusted servers to make request to the Parse Server Cloud Code Webhooks API, or block the API completely if you are not using the feature. |
| CVE-2022-41731 | IBM Watson Knowledge Catalog on Cloud Pak for Data 4.5.0 is vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 237402. |
| CVE-2022-41299 | IBM Cloud Transformation Advisor 2.0.1 through 3.3.1 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 237214. |
| CVE-2022-41210 | SAP Customer Data Cloud (Gigya mobile app for Android) - version 7.4, uses insecure random number generator program which makes it easy for the attacker to predict future random numbers. This can lead to information disclosure and modification of certain user settings. |
| CVE-2022-41209 | SAP Customer Data Cloud (Gigya mobile app for Android) - version 7.4, uses encryption method which lacks proper diffusion and does not hide the patterns well. This can lead to information disclosure. In certain scenarios, application might also be susceptible to replay attacks. |
| CVE-2022-40710 | A link following vulnerability in Trend Micro Deep Security 20 and Cloud One - Workload Security Agent for Windows could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. |
| CVE-2022-40709 | An Out-of-bounds read vulnerability in Trend Micro Deep Security 20 and Cloud One - Workload Security Agent for Windows could allow a local attacker to disclose sensitive information on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit these vulnerabilities. This vulnerability is similar to, but not identical to CVE-2022-40707 and 40708. |
| CVE-2022-40708 | An Out-of-bounds read vulnerability in Trend Micro Deep Security 20 and Cloud One - Workload Security Agent for Windows could allow a local attacker to disclose sensitive information on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit these vulnerabilities. This vulnerability is similar to, but not identical to CVE-2022-40707. |
| CVE-2022-40707 | An Out-of-bounds read vulnerability in Trend Micro Deep Security 20 and Cloud One - Workload Security Agent for Windows could allow a local attacker to disclose sensitive information on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit these vulnerabilities. This vulnerability is similar to, but not identical to CVE-2022-40708. |
| CVE-2022-39397 | aliyun-oss-client is a rust client for Alibaba Cloud OSS. Users of this library will be affected, the incoming secret will be disclosed unintentionally. This issue has been patched in version 0.8.1. |
| CVE-2022-39368 | Eclipse Californium is a Java implementation of RFC7252 - Constrained Application Protocol for IoT Cloud services. In versions prior to 3.7.0, and 2.7.4, Californium is vulnerable to a Denial of Service. Failing handshakes don't cleanup counters for throttling, causing the threshold to be reached without being released again. This results in permanently dropping records. The issue was reported for certificate based handshakes, but may also affect PSK based handshakes. It generally affects client and server as well. This issue is patched in version 3.7.0 and 2.7.4. There are no known workarounds. main: commit 726bac57659410da463dcf404b3e79a7312ac0b9 2.7.x: commit 5648a0c27c2c2667c98419254557a14bac2b1f3f |
| CVE-2022-39346 | Nextcloud server is an open source personal cloud server. Affected versions of nextcloud server did not properly limit user display names which could allow a malicious users to overload the backing database and cause a denial of service. It is recommended that the Nextcloud Server is upgraded to 22.2.10, 23.0.7 or 24.0.3. There are no known workarounds for this issue. |
| CVE-2022-39294 | conduit-hyper integrates a conduit application with the hyper server. Prior to version 0.4.2, `conduit-hyper` did not check any limit on a request's length before calling [`hyper::body::to_bytes`](https://docs.rs/hyper/latest/hyper/body/fn.to_bytes.html). An attacker could send a malicious request with an abnormally large `Content-Length`, which could lead to a panic if memory allocation failed for that request. In version 0.4.2, `conduit-hyper` sets an internal limit of 128 MiB per request, otherwise returning status 400 ("Bad Request"). This crate is part of the implementation of Rust's [crates.io](https://crates.io/), but that service is not affected due to its existing cloud infrastructure, which already drops such malicious requests. Even with the new limit in place, `conduit-hyper` is not recommended for production use, nor to directly serve the public Internet. |
| CVE-2022-39211 | Nextcloud server is an open source personal cloud platform. In affected versions it was found that locally running webservices can be found and requested erroneously. It is recommended that the Nextcloud Server is upgraded to 23.0.8 or 24.0.4. It is recommended that the Nextcloud Enterprise Server is upgraded to 22.2.10.4, 23.0.8 or 24.0.4. There are no known workarounds for this issue. |
| CVE-2022-38714 | IBM DataStage on Cloud Pak for Data 4.0.6 to 4.5.2 stores sensitive credential information that can be read by a privileged user. IBM X-Force ID: 235060. |
| CVE-2022-38709 | IBM Robotic Process Automation 21.0.1, 21.0.2, and 21.0.3 for Cloud Pak is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 234291. |
| CVE-2022-38387 | IBM Cloud Pak for Security (CP4S) 1.10.0.0 through 1.10.2.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 233786. |
| CVE-2022-38386 | IBM Cloud Pak for Security (CP4S) 1.10.0.0 through 1.10.11.0 and IBM QRadar Suite for Software 1.10.12.0 through 1.10.19.0 does not set the SameSite attribute for sensitive cookies which could allow an attacker to obtain sensitive information using man-in-the-middle techniques. IBM X-Force ID: 233778. |
| CVE-2022-38385 | IBM Cloud Pak for Security (CP4S) 1.10.0.0 through 1.10.2.0 could allow an authenticated user to obtain highly sensitive information or perform unauthorized actions due to improper input validation. IBM X-Force ID: 233777. |
| CVE-2022-37775 | Genesys PureConnect Interaction Web Tools Chat Service (up to at least 26- September- 2019) allows XSS within the Printable Chat History via the participant -> name JSON POST parameter. |
| CVE-2022-37177 | ** DISPUTED ** HireVue Hiring Platform V1.0 suffers from Use of a Broken or Risky Cryptographic Algorithm. NOTE: this is disputed by the vendor for multiple reasons, e.g., it is inconsistent with CVE ID assignment rules for cloud services, and no product with version V1.0 exists. Furthermore, the rail-fence cipher has been removed, and TLS 1.2 is now used for encryption. |
| CVE-2022-36917 | A missing permission check in Jenkins Google Cloud Backup Plugin 0.6 and earlier allows attackers with Overall/Read permission to request a manual backup. |
| CVE-2022-36916 | A cross-site request forgery (CSRF) vulnerability in Jenkins Google Cloud Backup Plugin 0.6 and earlier allows attackers to request a manual backup. |
| CVE-2022-36777 | IBM Cloud Pak for Security (CP4S) 1.10.0.0 through 1.10.11.0 and IBM QRadar Suite Software 1.10.12.0 through 1.10.16.0could allow an authenticated user to obtain sensitive version information that could aid in further attacks against the system. IBM X-Force ID: 233665. |
| CVE-2022-36776 | IBM Cloud Pak for Security (CP4S) 1.10.0.0 79and 1.10.2.0 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 233663. |
| CVE-2022-36769 | IBM Cloud Pak for Data 4.5 and 4.6 could allow a privileged user to upload malicious files of dangerous types that can be automatically processed within the product's environment. IBM X-Force ID: 232034. |
| CVE-2022-36417 | Multiple Stored Cross-Site Scripting (XSS) via Cross-Site Request Forgery (CSRF) vulnerability in 3D Tag Cloud plugin <= 3.8 at WordPress. |
| CVE-2022-36331 | Western Digital My Cloud, My Cloud Home, My Cloud Home Duo, and SanDisk ibi devices were vulnerable to an impersonation attack that could allow an unauthenticated attacker to gain access to user data. This issue affects My Cloud OS 5 devices: before 5.25.132; My Cloud Home and My Cloud Home Duo: before 8.13.1-102; SanDisk ibi: before 8.13.1-102. |
| CVE-2022-36330 | A buffer overflow vulnerability was discovered on firmware version validation that could lead to an unauthenticated remote code execution in Western Digital My Cloud Home, My Cloud Home Duo and SanDisk ibi devices. An attacker would require exploitation of another vulnerability to raise their privileges in order to exploit this buffer overflow vulnerability. This issue affects My Cloud Home and My Cloud Home Duo: before 9.4.0-191; ibi: before 9.4.0-191. |
| CVE-2022-36329 | An improper privilege management issue that could allow an attacker to cause a denial of service over the OTA mechanism was discovered in Western Digital My Cloud Home, My Cloud Home Duo and SanDisk ibi devices.This issue affects My Cloud Home and My Cloud Home Duo: before 9.4.0-191; ibi: before 9.4.0-191. |
| CVE-2022-36328 | Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability that could allow an attacker to create arbitrary shares on arbitrary directories and exfiltrate sensitive files, passwords, users and device configurations was discovered in Western Digital My Cloud Home, My Cloud Home Duo, SanDisk ibi and Western Digital My Cloud OS 5 devices. This can only be exploited once an attacker gains root privileges on the devices using an authentication bypass issue or another vulnerability.This issue affects My Cloud Home and My Cloud Home Duo: before 9.4.0-191; ibi: before 9.4.0-191; My Cloud OS 5: before 5.26.202. |
| CVE-2022-36327 | Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability that could allow an attacker to write files to locations with certain critical filesystem types leading to remote code execution was discovered in Western Digital My Cloud Home, My Cloud Home Duo, SanDisk ibi and Western Digital My Cloud OS 5 devices. This issue requires an authentication bypass issue to be triggered before this can be exploited. This issue affects My Cloud Home and My Cloud Home Duo: before 9.4.0-191; ibi: before 9.4.0-191; My Cloud OS 5: before 5.26.202. |
| CVE-2022-36326 | An uncontrolled resource consumption vulnerability issue that could arise by sending crafted requests to a service to consume a large amount of memory, eventually resulting in the service being stopped and restarted was discovered in Western Digital My Cloud Home, My Cloud Home Duo, SanDisk ibi and Western Digital My Cloud OS 5 devices. This issue requires the attacker to already have root privileges in order to exploit this vulnerability.This issue affects My Cloud Home and My Cloud Home Duo: before 9.4.0-191; ibi: before 9.4.0-191; My Cloud OS 5: before 5.26.202. |
| CVE-2022-36103 | Talos Linux is a Linux distribution built for Kubernetes deployments. Talos worker nodes use a join token to get accepted into the Talos cluster. Due to improper validation of the request while signing a worker node CSR (certificate signing request) Talos control plane node might issue Talos API certificate which allows full access to Talos API on a control plane node. Accessing Talos API with full level access on a control plane node might reveal sensitive information which allows full level access to the cluster (Kubernetes and Talos PKI, etc.). Talos API join token is stored in the machine configuration on the worker node. When configured correctly, Kubernetes workloads don't have access to the machine configuration, but due to a misconfiguration workload might access the machine configuration and reveal the join token. This problem has been fixed in Talos 1.2.2. Enabling the Pod Security Standards mitigates the vulnerability by denying hostPath mounts and host networking by default in the baseline policy. Clusters that don't run untrusted workloads are not affected. Clusters with correct Pod Security configurations which don't allow hostPath mounts, and secure access to cloud metadata server (or machine configuration is not supplied via cloud metadata server) are not affected. |
| CVE-2022-36079 | Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Internal fields (keys used internally by Parse Server, prefixed by `_`) and protected fields (user defined) can be used as query constraints. Internal and protected fields are removed by Parse Server and are only returned to the client using a valid master key. However, using query constraints, these fields can be guessed by enumerating until Parse Server, prior to versions 4.10.14 or 5.2.5, returns a response object. The patch available in versions 4.10.14 and 5.2.5 requires the maser key to use internal and protected fields as query constraints. As a workaround, implement a Parse Cloud Trigger `beforeFind` and manually remove the query constraints. |
| CVE-2022-36074 | Nextcloud server is an open source personal cloud product. Affected versions of this package are vulnerable to Information Exposure which fails to strip the Authorization header on HTTP downgrade. This can lead to account access exposure and compromise. It is recommended that the Nextcloud Server is upgraded to 23.0.7 or 24.0.3. It is recommended that the Nextcloud Enterprise Server is upgraded to 22.2.11, 23.0.7 or 24.0.3. There are no known workarounds for this issue. |
| CVE-2022-36065 | GrowthBook is an open-source platform for feature flagging and A/B testing. With some self-hosted configurations in versions prior to 2022-08-29, attackers can register new accounts and upload files to arbitrary directories within the container. If the attacker uploads a Python script to the right location, they can execute arbitrary code within the container. To be affected, ALL of the following must be true: Self-hosted deployment (GrowthBook Cloud is unaffected); using local file uploads (as opposed to S3 or Google Cloud Storage); NODE_ENV set to a non-production value and JWT_SECRET set to an easily guessable string like `dev`. This issue is patched in commit 1a5edff8786d141161bf880c2fd9ccbe2850a264 (2022-08-29). As a workaround, set `JWT_SECRET` environment variable to a long random string. This will stop arbitrary file uploads, but the only way to stop attackers from registering accounts is by updating to the latest build. |
| CVE-2022-35757 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2022-35639 | IBM Sterling Partner Engagement Manager 6.1, 6.2, and Cloud 22.2 do not limit the length of a connection which could cause the server to become unresponsive. IBM X-Force ID: 230932. |
| CVE-2022-35167 | Printix Cloud Print Management v1.3.1149.0 for Windows was discovered to contain insecure permissions. |
| CVE-2022-34434 | Cloud Mobility for Dell Storage versions 1.3.0 and earlier contains an Improper Access Control vulnerability within the Postgres database. A threat actor with root level access to either the vApp or containerized versions of Cloud Mobility may potentially exploit this vulnerability, leading to the modification or deletion of tables that are required for many of the core functionalities of Cloud Mobility. Exploitation may lead to the compromise of integrity and availability of the normal functionality of the Cloud Mobility application. |
| CVE-2022-33936 | Cloud Mobility for Dell EMC Storage, 1.3.0.XXX contains a RCE vulnerability. A non-privileged user could potentially exploit this vulnerability, leading to achieving a root shell. This is a critical issue; so Dell recommends customers to upgrade at the earliest opportunity. |
| CVE-2022-33713 | Implicit Intent hijacking vulnerability in Samsung Cloud prior to version 5.2.0 allows attacker to get sensitive information. |
| CVE-2022-33202 | Authentication bypass vulnerability in the setup screen of L2Blocker(on-premise) Ver4.8.5 and earlier and L2Blocker(Cloud) Ver4.8.5 and earlier allows an adjacent attacker to perform an unauthorized login and obtain the stored information or cause a malfunction of the device by using alternative paths or channels for Sensor. |
| CVE-2022-32988 | Cross Site Scripting (XSS) vulnerability in router Asus DSL-N14U-B1 1.1.2.3_805 via the "*list" parameters (e.g. filter_lwlist, keyword_rulelist, etc) in every ".asp" page containing a list of stored strings. The following asp files are affected: (1) cgi-bin/APP_Installation.asp, (2) cgi-bin/Advanced_ACL_Content.asp, (3) cgi-bin/Advanced_ADSL_Content.asp, (4) cgi-bin/Advanced_ASUSDDNS_Content.asp, (5) cgi-bin/Advanced_AiDisk_ftp.asp, (6) cgi-bin/Advanced_AiDisk_samba.asp, (7) cgi-bin/Advanced_DSL_Content.asp, (8) cgi-bin/Advanced_Firewall_Content.asp, (9) cgi-bin/Advanced_FirmwareUpgrade_Content.asp, (10) cgi-bin/Advanced_GWStaticRoute_Content.asp, (11) cgi-bin/Advanced_IPTV_Content.asp, (12) cgi-bin/Advanced_IPv6_Content.asp, (13) cgi-bin/Advanced_KeywordFilter_Content.asp, (14) cgi-bin/Advanced_LAN_Content.asp, (15) cgi-bin/Advanced_Modem_Content.asp, (16) cgi-bin/Advanced_PortTrigger_Content.asp, (17) cgi-bin/Advanced_QOSUserPrio_Content.asp, (18) cgi-bin/Advanced_QOSUserRules_Content.asp, (19) cgi-bin/Advanced_SettingBackup_Content.asp, (20) cgi-bin/Advanced_System_Content.asp, (21) cgi-bin/Advanced_URLFilter_Content.asp, (22) cgi-bin/Advanced_VPN_PPTP.asp, (23) cgi-bin/Advanced_VirtualServer_Content.asp, (24) cgi-bin/Advanced_WANPort_Content.asp, (25) cgi-bin/Advanced_WAdvanced_Content.asp, (26) cgi-bin/Advanced_WMode_Content.asp, (27) cgi-bin/Advanced_WWPS_Content.asp, (28) cgi-bin/Advanced_Wireless_Content.asp, (29) cgi-bin/Bandwidth_Limiter.asp, (30) cgi-bin/Guest_network.asp, (31) cgi-bin/Main_AccessLog_Content.asp, (32) cgi-bin/Main_AdslStatus_Content.asp, (33) cgi-bin/Main_Spectrum_Content.asp, (34) cgi-bin/Main_WebHistory_Content.asp, (35) cgi-bin/ParentalControl.asp, (36) cgi-bin/QIS_wizard.asp, (37) cgi-bin/QoS_EZQoS.asp, (38) cgi-bin/aidisk.asp, (39) cgi-bin/aidisk/Aidisk-1.asp, (40) cgi-bin/aidisk/Aidisk-2.asp, (41) cgi-bin/aidisk/Aidisk-3.asp, (42) cgi-bin/aidisk/Aidisk-4.asp, (43) cgi-bin/blocking.asp, (44) cgi-bin/cloud_main.asp, (45) cgi-bin/cloud_router_sync.asp, (46) cgi-bin/cloud_settings.asp, (47) cgi-bin/cloud_sync.asp, (48) cgi-bin/device-map/DSL_dashboard.asp, (49) cgi-bin/device-map/clients.asp, (50) cgi-bin/device-map/disk.asp, (51) cgi-bin/device-map/internet.asp, (52) cgi-bin/error_page.asp, (53) cgi-bin/index.asp, (54) cgi-bin/index2.asp, (55) cgi-bin/qis/QIS_PTM_manual_setting.asp, (56) cgi-bin/qis/QIS_admin_pass.asp, (57) cgi-bin/qis/QIS_annex_setting.asp, (58) cgi-bin/qis/QIS_bridge_cfg_tmp.asp, (59) cgi-bin/qis/QIS_detect.asp, (60) cgi-bin/qis/QIS_finish.asp, (61) cgi-bin/qis/QIS_ipoa_cfg_tmp.asp, (62) cgi-bin/qis/QIS_manual_setting.asp, (63) cgi-bin/qis/QIS_mer_cfg.asp, (64) cgi-bin/qis/QIS_mer_cfg_tmp.asp, (65) cgi-bin/qis/QIS_ppp_cfg.asp, (66) cgi-bin/qis/QIS_ppp_cfg_tmp.asp, (67) cgi-bin/qis/QIS_wireless.asp, (68) cgi-bin/query_wan_status.asp, (69) cgi-bin/query_wan_status2.asp, and (70) cgi-bin/start_apply.asp. |
| CVE-2022-32156 | In Splunk Enterprise and Universal Forwarder versions before 9.0, the Splunk command-line interface (CLI) did not validate TLS certificates while connecting to a remote Splunk platform instance by default. After updating to version 9.0, see Configure TLS host name validation for the Splunk CLI https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation#Configure_TLS_host_name_validation_for_the_Splunk_CLI to enable the remediation. The vulnerability does not affect the Splunk Cloud Platform. At the time of publishing, we have no evidence of exploitation of this vulnerability by external parties. The issue requires conditions beyond the control of a potential bad actor such as a machine-in-the-middle attack. Hence, Splunk rates the complexity of the attack as High. |
| CVE-2022-32153 | Splunk Enterprise peers in Splunk Enterprise versions before 9.0 and Splunk Cloud Platform versions before 8.2.2203 did not validate the TLS certificates during Splunk-to-Splunk communications by default. Splunk peer communications configured properly with valid certificates were not vulnerable. However, an attacker with administrator credentials could add a peer without a valid certificate and connections from misconfigured nodes without valid certificates did not fail by default. For Splunk Enterprise, update to Splunk Enterprise version 9.0 and Configure TLS host name validation for Splunk-to-Splunk communications (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation) to enable the remediation. |
| CVE-2022-32152 | Splunk Enterprise peers in Splunk Enterprise versions before 9.0 and Splunk Cloud Platform versions before 8.2.2203 did not validate the TLS certificates during Splunk-to-Splunk communications by default. Splunk peer communications configured properly with valid certificates were not vulnerable. However, an attacker with administrator credentials could add a peer without a valid certificate and connections from misconfigured nodes without valid certificates did not fail by default. For Splunk Enterprise, update to Splunk Enterprise version 9.0 and Configure TLS host name validation for Splunk-to-Splunk communications (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation) to enable the remediation. |
| CVE-2022-32151 | The httplib and urllib Python libraries that Splunk shipped with Splunk Enterprise did not validate certificates using the certificate authority (CA) certificate stores by default in Splunk Enterprise versions before 9.0 and Splunk Cloud Platform versions before 8.2.2203. Python 3 client libraries now verify server certificates by default and use the appropriate CA certificate stores for each library. Apps and add-ons that include their own HTTP libraries are not affected. For Splunk Enterprise, update to Splunk Enterprise version 9.0 and Configure TLS host name validation for Splunk-to-Splunk communications (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation) to enable the remediation. |
| CVE-2022-3186 | Dataprobe iBoot-PDU FW versions prior to 1.42.06162022 contain a vulnerability where the affected product allows an attacker to access the device’s main management page from the cloud. This feature enables users to remotely connect devices, however, the current implementation permits users to access other device's information. |
| CVE-2022-31678 | VMware Cloud Foundation (NSX-V) contains an XML External Entity (XXE) vulnerability. On VCF 3.x instances with NSX-V deployed, this may allow a user to exploit this issue leading to a denial-of-service condition or unintended information disclosure. |
| CVE-2022-31132 | Nextcloud Mail is an email application for the nextcloud personal cloud product. Affected versions shipped with a CSS minifier on the path `./vendor/cerdic/css-tidy/css_optimiser.php`. Access to the minifier is unrestricted and access may lead to Server-Side Request Forgery (SSRF). It is recommendet to upgrade to Mail 1.12.7 or Mail 1.13.6. Users unable to upgrade may manually delete the file located at `./vendor/cerdic/css-tidy/css_optimiser.php` |
| CVE-2022-31120 | Nextcloud server is an open source personal cloud solution. The audit log is used to get a full trail of the actions which has been incompletely populated. In affected versions federated share events were not properly logged which would allow brute force attacks to go unnoticed. This behavior exacerbates the impact of CVE-2022-31118. It is recommended that the Nextcloud Server is upgraded to 22.2.7, 23.0.4 or 24.0.0. There are no workarounds available. |
| CVE-2022-31119 | Nextcloud Mail is an email application for the nextcloud personal cloud product. Affected versions of Nextcloud mail would log user passwords to disk in the event of a misconfiguration. Should an attacker gain access to the logs complete access to affected accounts would be obtainable. It is recommended that the Nextcloud Mail is upgraded to 1.12.1. Operators should inspect their logs and remove passwords which have been logged. There are no workarounds to prevent logging in the event of a misconfiguration. |
| CVE-2022-31118 | Nextcloud server is an open source personal cloud solution. In affected versions an attacker could brute force to find if federated sharing is being used and potentially try to brute force access tokens for federated shares (`a-zA-Z0-9` ^ 15). It is recommended that the Nextcloud Server is upgraded to 22.2.9, 23.0.6 or 24.0.2. Users unable to upgrade may disable federated sharing via the Admin Sharing settings in `index.php/settings/admin/sharing`. |
| CVE-2022-31098 | Weave GitOps is a simple open source developer platform for people who want cloud native applications, without needing Kubernetes expertise. A vulnerability in the logging of Weave GitOps could allow an authenticated remote attacker to view sensitive cluster configurations, aka KubeConfg, of registered Kubernetes clusters, including the service account tokens in plain text from Weave GitOps's pod logs on the management cluster. An unauthorized remote attacker can also view these sensitive configurations from external log storage if enabled by the management cluster. This vulnerability is due to the client factory dumping cluster configurations and their service account tokens when the cluster manager tries to connect to an API server of a registered cluster, and a connection error occurs. An attacker could exploit this vulnerability by either accessing logs of a pod of Weave GitOps, or from external log storage and obtaining all cluster configurations of registered clusters. A successful exploit could allow the attacker to use those cluster configurations to manage the registered Kubernetes clusters. This vulnerability has been fixed by commit 567356f471353fb5c676c77f5abc2a04631d50ca. Users should upgrade to Weave GitOps core version v0.8.1-rc.6 or newer. There is no known workaround for this vulnerability. |
| CVE-2022-31079 | KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, the Cloud Stream server and the Edge Stream server reads the entire message into memory without imposing a limit on the size of this message. An attacker can exploit this by sending a large message to exhaust memory and cause a DoS. The Cloud Stream server and the Edge Stream server are under DoS attack in this case. The consequence of the exhaustion is that the CloudCore and EdgeCore will be in a denial of service. Only an authenticated user can cause this issue. It will be affected only when users enable `cloudStream` module in the config file `cloudcore.yaml` and enable `edgeStream` module in the config file `edgecore.yaml`. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. As a workaround, disable cloudStream module in the config file `cloudcore.yaml` and disable edgeStream module in the config file `edgecore.yaml`. |
| CVE-2022-31078 | KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, the CloudCore Router does not impose a limit on the size of responses to requests made by the REST handler. An attacker could use this weakness to make a request that will return an HTTP response with a large body and cause DoS of CloudCore. In the HTTP Handler API, the rest handler makes a request to a pre-specified handle. The handle will return an HTTP response that is then read into memory. The consequence of the exhaustion is that CloudCore will be in a denial of service. Only an authenticated user of the cloud can make an attack. It will be affected only when users enable `router` module in the config file `cloudcore.yaml`. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. As a workaround, disable the router switch in the config file `cloudcore.yaml`. |
| CVE-2022-31076 | KubeEdge is built upon Kubernetes and extends native containerized application orchestration and device management to hosts at the Edge. In affected versions a malicious message can crash CloudCore by triggering a nil-pointer dereference in the UDS Server. Since the UDS Server only communicates with the CSI Driver on the cloud side, the attack is limited to the local host network. As such, an attacker would already need to be an authenticated user of the Cloud. Additionally it will be affected only when users turn on the unixsocket switch in the config file cloudcore.yaml. This bug has been fixed in Kubeedge 1.11.0, 1.10.1, and 1.9.3. Users should update to these versions to resolve the issue. Users unable to upgrade should sisable the unixsocket switch of CloudHub in the config file cloudcore.yaml. |
| CVE-2022-31074 | KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, several endpoints in the Cloud AdmissionController may be susceptible to a DoS attack if an HTTP request containing a very large Body is sent to it. The consequence of the exhaustion is that the Cloud AdmissionController will be in denial of service. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. There is currently no known workaround. |
| CVE-2022-31028 | MinIO is a multi-cloud object storage solution. Starting with version RELEASE.2019-09-25T18-25-51Z and ending with version RELEASE.2022-06-02T02-11-04Z, MinIO is vulnerable to an unending go-routine buildup while keeping connections established due to HTTP clients not closing the connections. Public-facing MinIO deployments are most affected. Users should upgrade to RELEASE.2022-06-02T02-11-04Z to receive a patch. One possible workaround is to use a reverse proxy to limit the number of connections being attempted in front of MinIO, and actively rejecting connections from such malicious clients. |
| CVE-2022-31014 | Nextcloud server is an open source personal cloud server. Affected versions were found to be vulnerable to SMTP command injection. The impact varies based on which commands are supported by the backend SMTP server. However, the main risk here is that the attacker can then hijack an already-authenticated SMTP session and run arbitrary SMTP commands as the email user, such as sending emails to other users, changing the FROM user, and so on. As before, this depends on the configuration of the server itself, but newlines should be sanitized to mitigate such arbitrary SMTP command injection. It is recommended that the Nextcloud Server is upgraded to 22.2.8 , 23.0.5 or 24.0.1. There are no known workarounds for this issue. |
| CVE-2022-29908 | The folioupdate service in Fabasoft Cloud Enterprise Client 22.4.0043 allows Local Privilege Escalation. |
| CVE-2022-29844 | A vulnerability in the FTP service of Western Digital My Cloud OS 5 devices running firmware versions prior to 5.26.119 allows an attacker to read and write arbitrary files. This could lead to a full NAS compromise and would give remote execution capabilities to the attacker. |
| CVE-2022-29843 | A command injection vulnerability in the DDNS service configuration of Western Digital My Cloud OS 5 devices running firmware versions prior to 5.26.119 allows an attacker to execute code in the context of the root user. |
| CVE-2022-29842 | Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability that could allow an attacker to execute code in the context of the root user on a vulnerable CGI file was discovered in Western Digital My Cloud OS 5 devicesThis issue affects My Cloud OS 5: before 5.26.119. |
| CVE-2022-29841 | Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that was caused by a command that read files from a privileged location and created a system command without sanitizing the read data. This command could be triggered by an attacker remotely to cause code execution and gain a reverse shell in Western Digital My Cloud OS 5 devices.This issue affects My Cloud OS 5: before 5.26.119. |
| CVE-2022-29840 | Server-Side Request Forgery (SSRF) vulnerability that could allow a rogue server on the local network to modify its URL to point back to the loopback adapter was addressed in Western Digital My Cloud OS 5 devices. This could allow the URL to exploit other vulnerabilities on the local server.This issue affects My Cloud OS 5 devices before 5.26.202. |
| CVE-2022-29839 | Insufficiently Protected Credentials vulnerability in the remote backups application on Western Digital My Cloud devices that could allow an attacker who has gained access to a relevant endpoint to use that information to access protected data. This issue affects: Western Digital My Cloud My Cloud versions prior to 5.25.124 on Linux. |
| CVE-2022-29838 | Improper Authentication vulnerability in the encrypted volumes and auto mount features of Western Digital My Cloud devices allows insecure direct access to the drive information in the case of a device reset. This issue affects: Western Digital My Cloud My Cloud versions prior to 5.25.124 on Linux. |
| CVE-2022-29837 | A path traversal vulnerability was addressed in Western Digital My Cloud Home, My Cloud Home Duo and SanDisk ibi which could allow an attacker to initiate installation of custom ZIP packages and overwrite system files. This could potentially lead to a code execution. |
| CVE-2022-29836 | Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability was discovered via an HTTP API on Western Digital My Cloud Home; My Cloud Home Duo; and SanDisk ibi devices that could allow an attacker to abuse certain parameters to point to random locations on the file system. This could also allow the attacker to initiate the installation of custom packages at these locations. This can only be exploited once the attacker has been authenticated to the device. This issue affects: Western Digital My Cloud Home and My Cloud Home Duo versions prior to 8.11.0-113 on Linux; SanDisk ibi versions prior to 8.11.0-113 on Linux. |
| CVE-2022-29550 | ** DISPUTED ** An issue was discovered in Qualys Cloud Agent 4.8.0-49. It writes "ps auxwwe" output to the /var/log/qualys/qualys-cloud-agent-scan.log file. This may, for example, unexpectedly write credentials (from environment variables) to disk in cleartext. NOTE: there are no common circumstances in which qualys-cloud-agent-scan.log can be read by a user other than root; however, the file contents could be exposed through site-specific operational practices. The vendor does NOT characterize this as a vulnerability because the ps data collection is intentional, and would only capture credentials on a machine that was already affected by the CWE-214 weakness. |
| CVE-2022-29549 | An issue was discovered in Qualys Cloud Agent 4.8.0-49. It executes programs at various full pathnames without first making ownership and permission checks (e.g., to help ensure that a program was installed by root) and without integrity checks (e.g., a checksum comparison against known legitimate programs). Also, the vendor recommendation is to install this agent software with root privileges. Thus, privilege escalation is possible on systems where any of these pathnames is controlled by a non-root user. An example is /opt/firebird/bin/isql, where the /opt/firebird directory is often owned by the firebird user. |
| CVE-2022-29228 | Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 the OAuth filter would try to invoke the remaining filters in the chain after emitting a local response, which triggers an ASSERT() in newer versions and corrupts memory on earlier versions. continueDecoding() shouldn’t ever be called from filters after a local reply has been sent. Users are advised to upgrade. There are no known workarounds for this issue. |
| CVE-2022-29227 | Envoy is a cloud-native high-performance edge/middle/service proxy. In versions prior to 1.22.1 if Envoy attempts to send an internal redirect of an HTTP request consisting of more than HTTP headers, there’s a lifetime bug which can be triggered. If while replaying the request Envoy sends a local reply when the redirect headers are processed, the downstream state indicates that the downstream stream is not complete. On sending the local reply, Envoy will attempt to reset the upstream stream, but as it is actually complete, and deleted, this result in a use-after-free. Users are advised to upgrade. Users unable to upgrade are advised to disable internal redirects if crashes are observed. |
| CVE-2022-29226 | Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 the OAuth filter implementation does not include a mechanism for validating access tokens, so by design when the HMAC signed cookie is missing a full authentication flow should be triggered. However, the current implementation assumes that access tokens are always validated thus allowing access in the presence of any access token attached to the request. Users are advised to upgrade. There is no known workaround for this issue. |
| CVE-2022-29225 | Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 secompressors accumulate decompressed data into an intermediate buffer before overwriting the body in the decode/encodeBody. This may allow an attacker to zip bomb the decompressor by sending a small highly compressed payload. Maliciously constructed zip files may exhaust system memory and cause a denial of service. Users are advised to upgrade. Users unable to upgrade may consider disabling decompression. |
| CVE-2022-29224 | Envoy is a cloud-native high-performance proxy. Versions of envoy prior to 1.22.1 are subject to a segmentation fault in the GrpcHealthCheckerImpl. Envoy can perform various types of upstream health checking. One of them uses gRPC. Envoy also has a feature which can “hold” (prevent removal) upstream hosts obtained via service discovery until configured active health checking fails. If an attacker controls an upstream host and also controls service discovery of that host (via DNS, the EDS API, etc.), an attacker can crash Envoy by forcing removal of the host from service discovery, and then failing the gRPC health check request. This will crash Envoy via a null pointer dereference. Users are advised to upgrade to resolve this vulnerability. Users unable to upgrade may disable gRPC health checking and/or replace it with a different health checking type as a mitigation. |
| CVE-2022-29170 | Grafana is an open-source platform for monitoring and observability. In Grafana Enterprise, the Request security feature allows list allows to configure Grafana in a way so that the instance doesn’t call or only calls specific hosts. The vulnerability present starting with version 7.4.0-beta1 and prior to versions 7.5.16 and 8.5.3 allows someone to bypass these security configurations if a malicious datasource (running on an allowed host) returns an HTTP redirect to a forbidden host. The vulnerability only impacts Grafana Enterprise when the Request security allow list is used and there is a possibility to add a custom datasource to Grafana which returns HTTP redirects. In this scenario, Grafana would blindly follow the redirects and potentially give secure information to the clients. Grafana Cloud is not impacted by this vulnerability. Versions 7.5.16 and 8.5.3 contain a patch for this issue. There are currently no known workarounds. |
| CVE-2022-29052 | Jenkins Google Compute Engine Plugin 4.3.8 and earlier stores private keys unencrypted in cloud agent config.xml files on the Jenkins controller where they can be viewed by users with Extended Read permission, or access to the Jenkins controller file system. |
| CVE-2022-28920 | Tieba-Cloud-Sign v4.9 was discovered to contain a cross-site scripting (XSS) vulnerability via the function strip_tags. |
| CVE-2022-2830 | Deserialization of Untrusted Data vulnerability in the message processing component of Bitdefender GravityZone Console allows an attacker to pass unsafe commands to the environment. This issue affects: Bitdefender GravityZone Console On-Premise versions prior to 6.29.2-1. Bitdefender GravityZone Cloud Console versions prior to 6.27.2-2. |
| CVE-2022-27183 | The Monitoring Console app configured in Distributed mode allows for a Reflected XSS in a query parameter in Splunk Enterprise versions before 8.1.4. The Monitoring Console app is a bundled app included in Splunk Enterprise, not for download on SplunkBase, and not installed on Splunk Cloud Platform instances. Note that the Cloud Monitoring Console is not impacted. |
| CVE-2022-2664 | A vulnerability classified as critical has been found in Private Cloud Management Platform. Affected is an unknown function of the file /management/api/rcx_management/global_config_query of the component POST Request Handler. The manipulation leads to improper authentication. It is possible to launch the attack remotely. VDB-205614 is the identifier assigned to this vulnerability. |
| CVE-2022-25899 | Authentication bypass for the Open AMT Cloud Toolkit software maintained by Intel(R) before versions 2.0.2 and 2.2.2 may allow an unauthenticated user to potentially enable escalation of privilege via network access. |
| CVE-2022-25294 | Proofpoint Insider Threat Management Agent for Windows relies on an inherently dangerous function that could enable an unprivileged local Windows user to run arbitrary code with SYSTEM privileges. All versions prior to 7.12.1 are affected. Agents for MacOS and Linux and Cloud are unaffected. Proofpoint has released fixed software version 7.12.1. The fixed software versions are available through the customer support portal. |
| CVE-2022-25090 | Printix Secure Cloud Print Management through 1.3.1106.0 creates a temporary temp.ini file in a directory with insecure permissions, leading to privilege escalation because of a race condition. |
| CVE-2022-25089 | Printix Secure Cloud Print Management through 1.3.1106.0 incorrectly uses Privileged APIs to modify values in HKEY_LOCAL_MACHINE via UITasks.PersistentRegistryData. |
| CVE-2022-24796 | RaspberryMatic is a free and open-source operating system for running a cloud-free smart-home using the homematicIP / HomeMatic hardware line of IoT devices. A Remote Code Execution (RCE) vulnerability in the file upload facility of the WebUI interface of RaspberryMatic exists. Missing input validation/sanitization in the file upload mechanism allows remote, unauthenticated attackers with network access to the WebUI interface to achieve arbitrary operating system command execution via shell metacharacters in the HTTP query string. Injected commands are executed as root, thus leading to a full compromise of the underlying system and all its components. Versions after `2.31.25.20180428` and prior to `3.63.8.20220330` are affected. Users are advised to update to version `3.63.8.20220330` or newer. There are currently no known workarounds to mitigate the security impact and users are advised to update to the latest version available. |
| CVE-2022-24741 | Nextcloud server is an open source, self hosted cloud style services platform. In affected versions an attacker can cause a denial of service by uploading specially crafted files which will cause the server to allocate too much memory / CPU. It is recommended that the Nextcloud Server is upgraded to 21.0.8 , 22.2.4 or 23.0.1. Users unable to upgrade should disable preview generation with the `'enable_previews'` config flag. |
| CVE-2022-2412 | The Better Tag Cloud WordPress plugin through 0.99.5 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks when the unfiltered_html capability is disallowed (for example in multisite setup) |
| CVE-2022-24077 | Naver Cloud Explorer Beta allows the attacker to execute arbitrary code as System privilege via malicious DLL injection. |
| CVE-2022-23856 | An issue was discovered in Saviynt Enterprise Identity Cloud (EIC) 5.5 SP2.x. An attacker can enumerate users by changing the id parameter, such as for the ECM/maintenance/forgotpasswordstep1 URI. |
| CVE-2022-23855 | An issue was discovered in Saviynt Enterprise Identity Cloud (EIC) 5.5 SP2.x. An authentication bypass in ECM/maintenance/forgotpasswordstep1 allows an unauthenticated user to reset passwords and login as any local account. |
| CVE-2022-23653 | B2 Command Line Tool is the official command line tool for the backblaze cloud storage service. Linux and Mac releases of the B2 command-line tool version 3.2.0 and below contain a key disclosure vulnerability that, in certain conditions, can be exploited by local attackers through a time-of-check-time-of-use (TOCTOU) race condition. The command line tool saves API keys (and bucket name-to-id mapping) in a local database file (`$XDG_CONFIG_HOME/b2/account_info`, `~/.b2_account_info` or a user-defined path) when `b2 authorize-account` is first run. This happens regardless of whether a valid key is provided or not. When first created, the file is world readable and is (typically a few milliseconds) later altered to be private to the user. If the directory is readable by a local attacker and the user did not yet run `b2 authorize-account` then during the brief period between file creation and permission modification, a local attacker can race to open the file and maintain a handle to it. This allows the local attacker to read the contents after the file after the sensitive information has been saved to it. Users that have not yet run `b2 authorize-account` should upgrade to B2 Command-Line Tool v3.2.1 before running it. Users that have run `b2 authorize-account` are safe if at the time of the file creation no other local users had read access to the local configuration file. Users that have run `b2 authorize-account` where the designated path could be opened by another local user should upgrade to B2 Command-Line Tool v3.2.1 and remove the database and regenerate all application keys. Note that `b2 clear-account` does not remove the database file and it should not be used to ensure that all open handles to the file are invalidated. If B2 Command-Line Tool cannot be upgraded to v3.2.1 due to a dependency conflict, a binary release can be used instead. Alternatively a new version could be installed within a virtualenv, or the permissions can be changed to prevent local users from opening the database file. |
| CVE-2022-23651 | b2-sdk-python is a python library to access cloud storage provided by backblaze. Linux and Mac releases of the SDK version 1.14.0 and below contain a key disclosure vulnerability that, in certain conditions, can be exploited by local attackers through a time-of-check-time-of-use (TOCTOU) race condition. SDK users of the SqliteAccountInfo format are vulnerable while users of the InMemoryAccountInfo format are safe. The SqliteAccountInfo saves API keys (and bucket name-to-id mapping) in a local database file ($XDG_CONFIG_HOME/b2/account_info, ~/.b2_account_info or a user-defined path). When first created, the file is world readable and is (typically a few milliseconds) later altered to be private to the user. If the directory containing the file is readable by a local attacker then during the brief period between file creation and permission modification, a local attacker can race to open the file and maintain a handle to it. This allows the local attacker to read the contents after the file after the sensitive information has been saved to it. Consumers of this SDK who rely on it to save data using SqliteAccountInfo class should upgrade to the latest version of the SDK. Those who believe a local user might have opened a handle using this race condition, should remove the affected database files and regenerate all application keys. Users should upgrade to b2-sdk-python 1.14.1 or later. |
| CVE-2022-23606 | Envoy is an open source edge and service proxy, designed for cloud-native applications. When a cluster is deleted via Cluster Discovery Service (CDS) all idle connections established to endpoints in that cluster are disconnected. A recursion was introduced in the procedure of disconnecting idle connections that can lead to stack exhaustion and abnormal process termination when a cluster has a large number of idle connections. This infinite recursion causes Envoy to crash. Users are advised to upgrade. |
| CVE-2022-23509 | Weave GitOps is a simple open source developer platform for people who want cloud native applications, without needing Kubernetes expertise. GitOps run has a local S3 bucket which it uses for synchronizing files that are later applied against a Kubernetes cluster. The communication between GitOps Run and the local S3 bucket is not encrypted. This allows privileged users or process to tap the local traffic to gain information permitting access to the s3 bucket. From that point, it would be possible to alter the bucket content, resulting in changes in the Kubernetes cluster's resources. There are no known workaround(s) for this vulnerability. This vulnerability has been fixed by commits ce2bbff and babd915. Users should upgrade to Weave GitOps version >= v0.12.0 released on 08/12/2022. |
| CVE-2022-23508 | Weave GitOps is a simple open source developer platform for people who want cloud native applications, without needing Kubernetes expertise. A vulnerability in GitOps run could allow a local user or process to alter a Kubernetes cluster's resources. GitOps run has a local S3 bucket which it uses for synchronizing files that are later applied against a Kubernetes cluster. Its endpoint had no security controls to block unauthorized access, therefore allowing local users (and processes) on the same machine to see and alter the bucket content. By leveraging this vulnerability, an attacker could pick a workload of their choosing and inject it into the S3 bucket, which resulted in the successful deployment in the target cluster, without the need to provide any credentials to either the S3 bucket nor the target Kubernetes cluster. There are no known workarounds for this issue, please upgrade. This vulnerability has been fixed by commits 75268c4 and 966823b. Users should upgrade to Weave GitOps version >= v0.12.0 released on 08/12/2022. ### Workarounds There is no workaround for this vulnerability. ### References Disclosed by Paulo Gomes, Senior Software Engineer, Weaveworks. ### For more information If you have any questions or comments about this advisory: - Open an issue in [Weave GitOps repository](https://github.com/weaveworks/weave-gitops) - Email us at [support@weave.works](mailto:support@weave.works) |
| CVE-2022-23506 | Spinnaker is an open source, multi-cloud continuous delivery platform for releasing software changes, and Spinnaker's Rosco microservice produces machine images. Rosco prior to versions 1.29.2, 1.28.4, and 1.27.3 does not property mask secrets generated via packer builds. This can lead to exposure of sensitive AWS credentials in packer log files. Versions 1.29.2, 1.28.4, and 1.27.3 of Rosco contain fixes for this issue. A workaround is available. It's recommended to use short lived credentials via role assumption and IAM profiles. Additionally, credentials can be set in `/home/spinnaker/.aws/credentials` and `/home/spinnaker/.aws/config` as a volume mount for Rosco pods vs. setting credentials in roscos bake config properties. Last even with those it's recommend to use IAM Roles vs. long lived credentials. This drastically mitigates the risk of credentials exposure. If users have used static credentials, it's recommended to purge any bake logs for AWS, evaluate whether AWS_ACCESS_KEY, SECRET_KEY and/or other sensitive data has been introduced in log files and bake job logs. Then, rotate these credentials and evaluate potential improper use of those credentials. |
| CVE-2022-23464 | Nepxion Discovery is a solution for Spring Cloud. Discovery is vulnerable to a potential Server-Side Request Forgery (SSRF). RouterResourceImpl uses RestTemplate’s getForEntity to retrieve the contents of a URL containing user-controlled input, potentially resulting in Information Disclosure. There is no patch available for this issue at time of publication. There are no known workarounds. |
| CVE-2022-23463 | Nepxion Discovery is a solution for Spring Cloud. Discover is vulnerable to SpEL Injection in discovery-commons. DiscoveryExpressionResolver’s eval method is evaluating expression with a StandardEvaluationContext, allowing the expression to reach and interact with Java classes such as java.lang.Runtime, leading to Remote Code Execution. There is no patch available for this issue at time of publication. There are no known workarounds. |
| CVE-2022-23286 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2022-23202 | Adobe Creative Cloud Desktop version 2.7.0.13 (and earlier) is affected by an Uncontrolled Search Path Element vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must download a malicious DLL file. The attacker has to deliver the DLL on the same folder as the installer which makes it as a high complexity attack vector. |
| CVE-2022-23166 | Sysaid – Sysaid Local File Inclusion (LFI) – An unauthenticated attacker can access to the system by accessing to "/lib/tinymce/examples/index.html" path. in the "Insert/Edit Embedded Media" window Choose Type : iFrame and File/URL : [here is the LFI] Solution: Update to 22.2.20 cloud version, or to 22.1.64 on premise version. |
| CVE-2022-23120 | A code injection vulnerability in Trend Micro Deep Security and Cloud One - Workload Security Agent for Linux version 20 and below could allow an attacker to escalate privileges and run arbitrary code in the context of root. Please note: an attacker must first obtain access to the target agent in an un-activated and unconfigured state in order to exploit this vulnerability. |
| CVE-2022-23119 | A directory traversal vulnerability in Trend Micro Deep Security and Cloud One - Workload Security Agent for Linux version 20 and below could allow an attacker to read arbitrary files from the file system. Please note: an attacker must first obtain compromised access to the target Deep Security Manager (DSM) or the target agent must be not yet activated or configured in order to exploit this vulnerability. |
| CVE-2022-23006 | A stack-based buffer overflow vulnerability was found on Western Digital My Cloud Home, My Cloud Home Duo, and SanDisk ibi that could allow an attacker accessing the system locally to read information from /etc/version file. This vulnerability can only be exploited by chaining it with another issue. If an attacker is able to carry out a remote code execution attack, they can gain access to the vulnerable file, due to the presence of insecure functions in code. User interaction is required for exploitation. Exploiting the vulnerability could result in exposure of information, ability to modify files, memory access errors, or system crashes. |
| CVE-2022-23000 | The Western Digital My Cloud Web App [https://os5.mycloud.com/] uses a weak SSLContext when attempting to configure port forwarding rules. This was enabled to maintain compatibility with old or outdated home routers. By using an "SSL" context instead of "TLS" or specifying stronger validation, deprecated or insecure protocols are permitted. As a result, a local user with no privileges can exploit this vulnerability and jeopardize the integrity, confidentiality and authenticity of information transmitted. The scope of impact cannot extend to other components and no user input is required to exploit this vulnerability. |
| CVE-2022-22999 | Western Digital My Cloud devices are vulnerable to a cross side scripting vulnerability that can allow a malicious user with elevated privileges access to drives being backed up to construct and inject JavaScript payloads into an authenticated user's browser. As a result, it may be possible to gain control over the authenticated session, steal data, modify settings, or redirect the user to malicious websites. The scope of impact can extend to other components. |
| CVE-2022-22997 | Addressed a remote code execution vulnerability by resolving a command injection vulnerability and closing an AWS S3 bucket that potentially allowed an attacker to execute unsigned code on My Cloud Home devices. |
| CVE-2022-22994 | A remote code execution vulnerability was discovered on Western Digital My Cloud devices where an attacker could trick a NAS device into loading through an unsecured HTTP call. This was a result insufficient verification of calls to the device. The vulnerability was addressed by disabling checks for internet connectivity using HTTP. |
| CVE-2022-22993 | A limited SSRF vulnerability was discovered on Western Digital My Cloud devices that could allow an attacker to impersonate a server and reach any page on the server by bypassing access controls. The vulnerability was addressed by creating a whitelist for valid parameters. |
| CVE-2022-22992 | A command injection remote code execution vulnerability was discovered on Western Digital My Cloud Devices that could allow an attacker to execute arbitrary system commands on the device. The vulnerability was addressed by escaping individual arguments to shell functions coming from user input. |
| CVE-2022-22990 | A limited authentication bypass vulnerability was discovered that could allow an attacker to achieve remote code execution and escalate privileges on the My Cloud devices. Addressed this vulnerability by changing access token validation logic and rewriting rule logic on PHP scripts. |
| CVE-2022-22989 | My Cloud OS 5 was vulnerable to a pre-authenticated stack overflow vulnerability on the FTP service that could be exploited by unauthenticated attackers on the network. Addressed the vulnerability by adding defenses against stack overflow issues. |
| CVE-2022-22979 | In Spring Cloud Function versions prior to 3.2.6, it is possible for a user who directly interacts with framework provided lookup functionality to cause a denial-of-service condition due to the caching issue in the Function Catalog component of the framework. |
| CVE-2022-22966 | An authenticated, high privileged malicious actor with network access to the VMware Cloud Director tenant or provider may be able to exploit a remote code execution vulnerability to gain access to the server. |
| CVE-2022-22963 | In Spring Cloud Function versions 3.1.6, 3.2.2 and older unsupported versions, when using routing functionality it is possible for a user to provide a specially crafted SpEL as a routing-expression that may result in remote code execution and access to local resources. |
| CVE-2022-22947 | In spring cloud gateway versions prior to 3.1.1+ and 3.0.7+ , applications are vulnerable to a code injection attack when the Gateway Actuator endpoint is enabled, exposed and unsecured. A remote attacker could make a maliciously crafted request that could allow arbitrary remote execution on the remote host. |
| CVE-2022-22946 | In spring cloud gateway versions prior to 3.1.1+ , applications that are configured to enable HTTP2 and no key store or trusted certificates are set will be configured to use an insecure TrustManager. This makes the gateway able to connect to remote services with invalid or custom certificates. |
| CVE-2022-22939 | VMware Cloud Foundation contains an information disclosure vulnerability due to logging of credentials in plain-text within multiple log files on the SDDC Manager. A malicious actor with root access on VMware Cloud Foundation SDDC Manager may be able to view credentials in plaintext within one or more log files. |
| CVE-2022-22493 | IBM WebSphere Automation for Cloud Pak for Watson AIOps 1.4.2 is vulnerable to cross-site request forgery, caused by improper cookie attribute setting. IBM X-Force ID: 226449. |
| CVE-2022-22417 | IBM Sterling Partner Engagement Manager 6.1.2, 6.2, and Cloud/SasS 22.2 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 223127. |
| CVE-2022-22416 | IBM Sterling Partner Engagement Manager 6.1.2, 6.2, and Cloud/SasS 22.2 is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks. IBM X-Force ID: 223126. |
| CVE-2022-22410 | IBM Watson Query with Cloud Pak for Data as a Service could allow an authenticated user to obtain sensitive information that would allow them to examine or alter system configurations or data sources connected to the service. IBM X-Force ID: 222763. |
| CVE-2022-22360 | IBM Sterling Partner Engagement Manager 6.1.2, 6.2, and Cloud/SasS 22.2 could allow a remote authenticated attacker to conduct an LDAP injection. By using a specially crafted request, an attacker could exploit this vulnerability and could result in in granting permission to unauthorized resources. IBM X-Force ID: 220782. |
| CVE-2022-22359 | IBM Sterling Partner Engagement Manager 6.1.2, 6.2, and Cloud/SasS 22.2 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. IBM X-Force ID: 220652. |
| CVE-2022-22358 | IBM Sterling Partner Engagement Manager 6.1.2, 6.2, and Cloud/SasS 22.2 is vulnerable to an XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 220651. |
| CVE-2022-22353 | IBM Big SQL on IBM Cloud Pak for Data 7.1.0, 7.1.1, 7.2.0, and 7.2.3 could allow an authenticated user with appropriate permissions to obtain sensitive information by bypassing data masking rules using a CREATE TABLE SELECT statement. IBM X-Force ID: 220480. |
| CVE-2022-22306 | An improper certificate validation vulnerability [CWE-295] in FortiOS 6.0.0 through 6.0.14, 6.2.0 through 6.2.10, 6.4.0 through 6.4.8, 7.0.0 may allow a network adjacent and unauthenticated attacker to man-in-the-middle the communication between the FortiGate and some peers such as private SDNs and external cloud platforms. |
| CVE-2022-22302 | A clear text storage of sensitive information (CWE-312) vulnerability in both FortiGate version 6.4.0 through 6.4.1, 6.2.0 through 6.2.9 and 6.0.0 through 6.0.13 and FortiAuthenticator version 5.5.0 and all versions of 6.1 and 6.0 may allow a local unauthorized party to retrieve the Fortinet private keys used to establish secure communication with both Apple Push Notification and Google Cloud Messaging services, via accessing the files on the filesystem. |
| CVE-2022-21657 | Envoy is an open source edge and service proxy, designed for cloud-native applications. In affected versions Envoy does not restrict the set of certificates it accepts from the peer, either as a TLS client or a TLS server, to only those certificates that contain the necessary extendedKeyUsage (id-kp-serverAuth and id-kp-clientAuth, respectively). This means that a peer may present an e-mail certificate (e.g. id-kp-emailProtection), either as a leaf certificate or as a CA in the chain, and it will be accepted for TLS. This is particularly bad when combined with the issue described in pull request #630, in that it allows a Web PKI CA that is intended only for use with S/MIME, and thus exempted from audit or supervision, to issue TLS certificates that will be accepted by Envoy. As a result Envoy will trust upstream certificates that should not be trusted. There are no known workarounds to this issue. Users are advised to upgrade. |
| CVE-2022-21656 | Envoy is an open source edge and service proxy, designed for cloud-native applications. The default_validator.cc implementation used to implement the default certificate validation routines has a "type confusion" bug when processing subjectAltNames. This processing allows, for example, an rfc822Name or uniformResourceIndicator to be authenticated as a domain name. This confusion allows for the bypassing of nameConstraints, as processed by the underlying OpenSSL/BoringSSL implementation, exposing the possibility of impersonation of arbitrary servers. As a result Envoy will trust upstream certificates that should not be trusted. |
| CVE-2022-21655 | Envoy is an open source edge and service proxy, designed for cloud-native applications. The envoy common router will segfault if an internal redirect selects a route configured with direct response or redirect actions. This will result in a denial of service. As a workaround turn off internal redirects if direct response entries are configured on the same listener. |
| CVE-2022-21654 | Envoy is an open source edge and service proxy, designed for cloud-native applications. Envoy's tls allows re-use when some cert validation settings have changed from their default configuration. The only workaround for this issue is to ensure that default tls settings are used. Users are advised to upgrade. |
| CVE-2022-21503 | Vulnerability in the Oracle Cloud Infrastructure product of Oracle Cloud Services. Easily exploitable vulnerability allows high privileged attacker with network access to compromise Oracle Cloud Infrastructure. Successful attacks of this vulnerability can result in unauthorized access to Oracle Cloud Infrastructure accessible data. All affected customers were notified of CVE-2022-21503 by Oracle. CVSS 3.1 Base Score 4.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N) |
| CVE-2022-21215 | This vulnerability could allow an attacker to force the server to create and execute a web request granting access to backend APIs that are only accessible to the Mimosa MMP server, or request pages that could perform some actions themselves. The attacker could force the server into accessing routes on those cloud-hosting platforms, accessing secret keys, changing configurations, etc. Affecting MMP: All versions prior to v1.0.3, PTP C-series: Device versions prior to v2.8.6.1, and PTMP C-series and A5x: Device versions prior to v2.5.4.1. |
| CVE-2022-21170 | Improper check for certificate revocation in i-FILTER Ver.10.45R01 and earlier, i-FILTER Ver.9.50R10 and earlier, i-FILTER Browser & Cloud MultiAgent for Windows Ver.4.93R04 and earlier, and D-SPA (Ver.3 / Ver.4) using i-FILTER allows a remote unauthenticated attacker to conduct a man-in-the-middle attack and eavesdrop on an encrypted communication. |
| CVE-2022-20860 | A vulnerability in the SSL/TLS implementation of Cisco Nexus Dashboard could allow an unauthenticated, remote attacker to alter communications with associated controllers or view sensitive information. This vulnerability exists because SSL server certificates are not validated when Cisco Nexus Dashboard is establishing a connection to Cisco Application Policy Infrastructure Controller (APIC), Cisco Cloud APIC, or Cisco Nexus Dashboard Fabric Controller, formerly Data Center Network Manager (DCNM) controllers. An attacker could exploit this vulnerability by using man-in-the-middle techniques to intercept the traffic between the affected device and the controllers, and then using a crafted certificate to impersonate the controllers. A successful exploit could allow the attacker to alter communications between devices or view sensitive information, including Administrator credentials for these controllers. |
| CVE-2022-20844 | A vulnerability in authentication mechanism of Cisco Software-Defined Application Visibility and Control (SD-AVC) on Cisco vManage could allow an unauthenticated, remote attacker to access the GUI of Cisco SD-AVC using a default static username and password combination. This vulnerability exists because the GUI is accessible on self-managed cloud installations or local server installations of Cisco vManage. An attacker could exploit this vulnerability by accessing the exposed GUI of Cisco SD-AVC. A successful exploit could allow the attacker to view managed device names, SD-AVC logs, and SD-AVC DNS server IP addresses. |
| CVE-2022-2084 | Sensitive data could be exposed in world readable logs of cloud-init before version 22.3 when schema failures are reported. This leak could include hashed passwords. |
| CVE-2022-20830 | A vulnerability in authentication mechanism of Cisco Software-Defined Application Visibility and Control (SD-AVC) on Cisco vManage could allow an unauthenticated, remote attacker to access the GUI of Cisco SD-AVC without authentication. This vulnerability exists because the GUI is accessible on self-managed cloud installations or local server installations of Cisco vManage. An attacker could exploit this vulnerability by accessing the exposed GUI of Cisco SD-AVC. A successful exploit could allow the attacker to view managed device names, SD-AVC logs, and SD-AVC DNS server IP addresses. |
| CVE-2022-20768 | A vulnerability in the logging component of Cisco TelePresence Collaboration Endpoint (CE) and RoomOS Software could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system. This vulnerability is due to the storage of certain unencrypted credentials. An attacker could exploit this vulnerability by accessing the audit logs on an affected system and obtaining credentials that they may not normally have access to. A successful exploit could allow the attacker to use those credentials to access confidential information, some of which may contain personally identifiable information (PII). Note: To access the logs that are stored in the RoomOS Cloud, an attacker would need valid Administrator-level credentials. |
| CVE-2022-20762 | A vulnerability in the Common Execution Environment (CEE) ConfD CLI of Cisco Ultra Cloud Core - Subscriber Microservices Infrastructure (SMI) software could allow an authenticated, local attacker to escalate privileges on an affected device. This vulnerability is due to insufficient access control in the affected CLI. An attacker could exploit this vulnerability by authenticating as a CEE ConfD CLI user and executing a specific CLI command. A successful exploit could allow an attacker to access privileged containers with root privileges. |
| CVE-2022-20748 | A vulnerability in the local malware analysis process of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to insufficient error handling in the local malware analysis process of an affected device. An attacker could exploit this vulnerability by sending a crafted file through the device. A successful exploit could allow the attacker to cause the local malware analysis process to crash, which could result in a DoS condition. Notes: Manual intervention may be required to recover from this situation. Malware cloud lookup and dynamic analysis will not be impacted. |
| CVE-2022-1700 | Improper Restriction of XML External Entity Reference ('XXE') vulnerability in the Policy Engine of Forcepoint Data Loss Prevention (DLP), which is also leveraged by Forcepoint One Endpoint (F1E), Web Security Content Gateway, Email Security with DLP enabled, and Cloud Security Gateway prior to June 20, 2022. The XML parser in the Policy Engine was found to be improperly configured to support external entities and external DTD (Document Type Definitions), which can lead to an XXE attack. This issue affects: Forcepoint Data Loss Prevention (DLP) versions prior to 8.8.2. Forcepoint One Endpoint (F1E) with Policy Engine versions prior to 8.8.2. Forcepoint Web Security Content Gateway versions prior to 8.5.5. Forcepoint Email Security with DLP enabled versions prior to 8.5.5. Forcepoint Cloud Security Gateway prior to June 20, 2022. |
| CVE-2022-1109 | An incorrect default permissions vulnerability in Lenovo Leyun cloud music application could allow denial of service. |
| CVE-2022-0484 | Lack of validation of URLs causes Mirantis Container Cloud Lens Extension before v3.1.1 to open external programs other than the default browser to perform sign on to a new cluster. An attacker could host a webserver which serves a malicious Mirantis Container Cloud configuration file and induce the victim to add a new cluster via its URL. This issue affects: Mirantis Mirantis Container Cloud Lens Extension v3 versions prior to v3.1.1. |
| CVE-2022-0028 | A PAN-OS URL filtering policy misconfiguration could allow a network-based attacker to conduct reflected and amplified TCP denial-of-service (RDoS) attacks. The DoS attack would appear to originate from a Palo Alto Networks PA-Series (hardware), VM-Series (virtual) and CN-Series (container) firewall against an attacker-specified target. To be misused by an external attacker, the firewall configuration must have a URL filtering profile with one or more blocked categories assigned to a source zone that has an external facing interface. This configuration is not typical for URL filtering and, if set, is likely unintended by the administrator. If exploited, this issue would not impact the confidentiality, integrity, or availability of our products. However, the resulting denial-of-service (DoS) attack may help obfuscate the identity of the attacker and implicate the firewall as the source of the attack. We have taken prompt action to address this issue in our PAN-OS software. All software updates for this issue are expected to be released no later than the week of August 15, 2022. This issue does not impact Panorama M-Series or Panorama virtual appliances. This issue has been resolved for all Cloud NGFW and Prisma Access customers and no additional action is required from them. |
| CVE-2021-46925 | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix kernel panic caused by race of smc_sock A crash occurs when smc_cdc_tx_handler() tries to access smc_sock but smc_release() has already freed it. [ 4570.695099] BUG: unable to handle page fault for address: 000000002eae9e88 [ 4570.696048] #PF: supervisor write access in kernel mode [ 4570.696728] #PF: error_code(0x0002) - not-present page [ 4570.697401] PGD 0 P4D 0 [ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111 [ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/0 [ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30 <...> [ 4570.711446] Call Trace: [ 4570.711746] <IRQ> [ 4570.711992] smc_cdc_tx_handler+0x41/0xc0 [ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560 [ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10 [ 4570.713489] tasklet_action_common.isra.17+0x66/0x140 [ 4570.714083] __do_softirq+0x123/0x2f4 [ 4570.714521] irq_exit_rcu+0xc4/0xf0 [ 4570.714934] common_interrupt+0xba/0xe0 Though smc_cdc_tx_handler() checked the existence of smc connection, smc_release() may have already dismissed and released the smc socket before smc_cdc_tx_handler() further visits it. smc_cdc_tx_handler() |smc_release() if (!conn) | | |smc_cdc_tx_dismiss_slots() | smc_cdc_tx_dismisser() | |sock_put(&smc->sk) <- last sock_put, | smc_sock freed bh_lock_sock(&smc->sk) (panic) | To make sure we won't receive any CDC messages after we free the smc_sock, add a refcount on the smc_connection for inflight CDC message(posted to the QP but haven't received related CQE), and don't release the smc_connection until all the inflight CDC messages haven been done, for both success or failed ones. Using refcount on CDC messages brings another problem: when the link is going to be destroyed, smcr_link_clear() will reset the QP, which then remove all the pending CQEs related to the QP in the CQ. To make sure all the CQEs will always come back so the refcount on the smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced by smc_ib_modify_qp_error(). And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we need to wait for all pending WQEs done, or we may encounter use-after- free when handling CQEs. For IB device removal routine, we need to wait for all the QPs on that device been destroyed before we can destroy CQs on the device, or the refcount on smc_connection won't reach 0 and smc_sock cannot be released. |
| CVE-2021-45968 | An issue was discovered in xmppserver jar in the XMPP Server component of the JIve platform, as used in Pascom Cloud Phone System before 7.20.x (and in other products). An endpoint in the backend Tomcat server of the Pascom allows SSRF, a related issue to CVE-2019-18394. |
| CVE-2021-45967 | An issue was discovered in Pascom Cloud Phone System before 7.20.x. A configuration error between NGINX and a backend Tomcat server leads to a path traversal in the Tomcat server, exposing unintended endpoints. |
| CVE-2021-45966 | An issue was discovered in Pascom Cloud Phone System before 7.20.x. In the management REST API, /services/apply in exd.pl allows remote attackers to execute arbitrary code via shell metacharacters. |
| CVE-2021-45228 | An XSS issue was discovered in COINS Construction Cloud 11.12. Due to insufficient neutralization of user input in the description of a task, it is possible to store malicious JavaScript code in the task description. This is later executed when it is reflected back to the user. |
| CVE-2021-45227 | An issue was discovered in COINS Construction Cloud 11.12. Due to an inappropriate use of HTML IFRAME elements, the file upload functionality is vulnerable to a persistent Cross-Site Scripting (XSS) attack. |
| CVE-2021-45226 | An issue was discovered in COINS Construction Cloud 11.12. Due to improper validation of user-controlled HTTP headers, attackers can cause it to send password-reset e-mails pointing to arbitrary websites. |
| CVE-2021-45225 | An issue was discovered in COINS Construction Cloud 11.12. Due to improper input neutralization, it is vulnerable to reflected cross-site scripting (XSS) via malicious links (affecting the search window and activity view window). |
| CVE-2021-45224 | An issue was discovered in COINS Construction Cloud 11.12. In several locations throughout the application, JavaScript code is passed as a URL parameter. Attackers can trivially alter this code to cause malicious behaviour. The application is therefore vulnerable to reflected XSS via malicious URLs. |
| CVE-2021-45223 | An issue was discovered in COINS Construction Cloud 11.12. Due to insufficient input neutralization, it is vulnerable to denial of service attacks via forced server crashes. |
| CVE-2021-45222 | An issue was discovered in COINS Construction Cloud 11.12. Due to logical flaws in the human ressources interface, it is vulnerable to privilege escalation by HR personnel. |
| CVE-2021-45103 | An issue was discovered in HTCondor 9.0.x before 9.0.10 and 9.1.x before 9.5.1. An attacker can access files stored in S3 cloud storage that a user has asked HTCondor to transfer. |
| CVE-2021-44632 | A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/upgrade_info feature, which allows malicious users to execute arbitrary code on the system via a crafted post request. |
| CVE-2021-44631 | A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/reset_cloud_pwd feature, which allows malicous users to execute arbitrary code on the system via a crafted post request. |
| CVE-2021-44630 | A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/modify_account_pwd feature, which allows malicious users to execute arbitrary code on the system via a crafted post request. |
| CVE-2021-44629 | A Buffer Overflow vulnerabilitiy exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/register feature, which allows malicious users to execute arbitrary code on the system via a crafted post request. |
| CVE-2021-44628 | A Buffer Overflow vulnerabiltiy exists in TP-LINK WR-886N 20190826 2.3.8 in thee /cloud_config/router_post/login feature, which allows malicious users to execute arbitrary code on the system via a crafted post request. |
| CVE-2021-44627 | A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/get_reset_pwd_veirfy_code feature, which allows malicious users to execute arbitrary code on the system via a crafted post request. |
| CVE-2021-44626 | A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/get_reg_verify_code feature, which allows malicious users to execute arbitrary code on the system via a crafted post request. |
| CVE-2021-44625 | A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in /cloud_config/cloud_device/info interface, which allows a malicious user to executee arbitrary code on the system via a crafted post request. |
| CVE-2021-44623 | A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 via the /cloud_config/router_post/check_reset_pwd_verify_code interface. |
| CVE-2021-44622 | A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/check_reg_verify_code function which could let a remove malicious user execute arbitrary code via a crafted post request. |
| CVE-2021-44529 | A code injection vulnerability in the Ivanti EPM Cloud Services Appliance (CSA) allows an unauthenticated user to execute arbitrary code with limited permissions (nobody). |
| CVE-2021-44178 | AEM's Cloud Service offering, as well as version 6.5.10.0 (and below) are affected by a reflected Cross-Site Scripting (XSS) vulnerability via the itemResourceType parameter. If an attacker is able to convince a victim to visit a URL referencing a vulnerable page, malicious JavaScript content may be executed within the context of the victim's browser |
| CVE-2021-44177 | AEM's Cloud Service offering, as well as version 6.5.10.0 (and below) are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by an attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field. |
| CVE-2021-44176 | AEM's Cloud Service offering, as well as version 6.5.10.0 (and below) are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by an attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field. |
| CVE-2021-43858 | MinIO is a Kubernetes native application for cloud storage. Prior to version `RELEASE.2021-12-27T07-23-18Z`, a malicious client can hand-craft an HTTP API call that allows for updating policy for a user and gaining higher privileges. The patch in version `RELEASE.2021-12-27T07-23-18Z` changes the accepted request body type and removes the ability to apply policy changes through this API. There is a workaround for this vulnerability: Changing passwords can be disabled by adding an explicit `Deny` rule to disable the API for users. |
| CVE-2021-43832 | Spinnaker is an open source, multi-cloud continuous delivery platform. Spinnaker has improper permissions allowing pipeline creation & execution. This lets an arbitrary user with access to the gate endpoint to create a pipeline and execute it without authentication. If users haven't setup Role-based access control (RBAC) with-in spinnaker, this enables remote execution and access to deploy almost any resources on any account. Patches are available on the latest releases of the supported branches and users are advised to upgrade as soon as possible. Users unable to upgrade should enable RBAC on ALL accounts and applications. This mitigates the ability of a pipeline to affect any accounts. Block application access unless permission are enabled. Users should make sure ALL application creation is restricted via appropriate wildcards. |
| CVE-2021-43826 | Envoy is an open source edge and service proxy, designed for cloud-native applications. In affected versions of Envoy a crash occurs when configured for :ref:`upstream tunneling <envoy_v3_api_field_extensions.filters.network.tcp_proxy.v3.TcpProxy.tunneling_config>` and the downstream connection disconnects while the the upstream connection or http/2 stream is still being established. There are no workarounds for this issue. Users are advised to upgrade. |
| CVE-2021-43825 | Envoy is an open source edge and service proxy, designed for cloud-native applications. Sending a locally generated response must stop further processing of request or response data. Envoy tracks the amount of buffered request and response data and aborts the request if the amount of buffered data is over the limit by sending 413 or 500 responses. However when the buffer overflows while response is processed by the filter chain the operation may not be aborted correctly and result in accessing a freed memory block. If this happens Envoy will crash resulting in a denial of service. |
| CVE-2021-43824 | Envoy is an open source edge and service proxy, designed for cloud-native applications. In affected versions a crafted request crashes Envoy when a CONNECT request is sent to JWT filter configured with regex match. This provides a denial of service attack vector. The only workaround is to not use regex in the JWT filter. Users are advised to upgrade. |
| CVE-2021-43820 | Seafile is an open source cloud storage system. A sync token is used in Seafile file syncing protocol to authorize access to library data. To improve performance, the token is cached in memory in seaf-server. Upon receiving a token from sync client or SeaDrive client, the server checks whether the token exist in the cache. However, if the token exists in cache, the server doesn't check whether it's associated with the specific library in the URL. This vulnerability makes it possible to use any valid sync token to access data from any **known** library. Note that the attacker has to first find out the ID of a library which it has no access to. The library ID is a random UUID, which is not possible to be guessed. There are no workarounds for this issue. |
| CVE-2021-43815 | Grafana is an open-source platform for monitoring and observability. Grafana prior to versions 8.3.2 and 7.5.12 has a directory traversal for arbitrary .csv files. It only affects instances that have the developer testing tool called TestData DB data source enabled and configured. The vulnerability is limited in scope, and only allows access to files with the extension .csv to authenticated users only. Grafana Cloud instances have not been affected by the vulnerability. Versions 8.3.2 and 7.5.12 contain a patch for this issue. There is a workaround available for users who cannot upgrade. Running a reverse proxy in front of Grafana that normalizes the PATH of the request will mitigate the vulnerability. The proxy will have to also be able to handle url encoded paths. |
| CVE-2021-43813 | Grafana is an open-source platform for monitoring and observability. Grafana prior to versions 8.3.2 and 7.5.12 contains a directory traversal vulnerability for fully lowercase or fully uppercase .md files. The vulnerability is limited in scope, and only allows access to files with the extension .md to authenticated users only. Grafana Cloud instances have not been affected by the vulnerability. Users should upgrade to patched versions 8.3.2 or 7.5.12. For users who cannot upgrade, running a reverse proxy in front of Grafana that normalizes the PATH of the request will mitigate the vulnerability. The proxy will have to also be able to handle url encoded paths. Alternatively, for fully lowercase or fully uppercase .md files, users can block /api/plugins/.*/markdown/.* without losing any functionality beyond inlined plugin help text. |
| CVE-2021-43798 | Grafana is an open-source platform for monitoring and observability. Grafana versions 8.0.0-beta1 through 8.3.0 (except for patched versions) iss vulnerable to directory traversal, allowing access to local files. The vulnerable URL path is: `<grafana_host_url>/public/plugins//`, where is the plugin ID for any installed plugin. At no time has Grafana Cloud been vulnerable. Users are advised to upgrade to patched versions 8.0.7, 8.1.8, 8.2.7, or 8.3.1. The GitHub Security Advisory contains more information about vulnerable URL paths, mitigation, and the disclosure timeline. |
| CVE-2021-43784 | runc is a CLI tool for spawning and running containers on Linux according to the OCI specification. In runc, netlink is used internally as a serialization system for specifying the relevant container configuration to the `C` portion of the code (responsible for the based namespace setup of containers). In all versions of runc prior to 1.0.3, the encoder did not handle the possibility of an integer overflow in the 16-bit length field for the byte array attribute type, meaning that a large enough malicious byte array attribute could result in the length overflowing and the attribute contents being parsed as netlink messages for container configuration. This vulnerability requires the attacker to have some control over the configuration of the container and would allow the attacker to bypass the namespace restrictions of the container by simply adding their own netlink payload which disables all namespaces. The main users impacted are those who allow untrusted images with untrusted configurations to run on their machines (such as with shared cloud infrastructure). runc version 1.0.3 contains a fix for this bug. As a workaround, one may try disallowing untrusted namespace paths from your container. It should be noted that untrusted namespace paths would allow the attacker to disable namespace protections entirely even in the absence of this bug. |
| CVE-2021-43765 | AEM's Cloud Service offering, as well as version 6.5.10.0 (and below) are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by an attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field. |
| CVE-2021-43764 | AEM's Cloud Service offering, as well as version 6.5.10.0 (and below) are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by an attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field. |
| CVE-2021-43762 | AEM's Cloud Service offering, as well as version 6.5.10.0 (and below) are affected by a dispatcher bypass vulnerability that could be abused to evade security controls. Sensitive areas of the web application may be exposed through exploitation of the vulnerability. |
| CVE-2021-43761 | AEM's Cloud Service offering, as well as versions 6.5.7.0 (and below), 6.4.8.3 (and below) and 6.3.3.8 (and below) are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by an attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field. |
| CVE-2021-43269 | In Code42 app before 8.8.0, eval injection allows an attacker to change a device’s proxy configuration to use a malicious proxy auto-config (PAC) file, leading to arbitrary code execution. This affects Incydr Basic, Advanced, and Gov F1; CrashPlan Cloud; and CrashPlan for Small Business. (Incydr Professional and Enterprise are unaffected.) |
| CVE-2021-43019 | Adobe Creative Cloud version 5.5 (and earlier) are affected by a privilege escalation vulnerability in the resources leveraged by the Setup.exe service. An unauthenticated attacker could leverage this vulnerability to remove files and escalate privileges under the context of SYSTEM . An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability on the product installer. User interaction is required before product installation to abuse this vulnerability. |
| CVE-2021-43017 | Adobe Creative Cloud version 5.5 (and earlier) are affected by an Application denial of service vulnerability in the Creative Cloud Desktop installer. An authenticated attacker with root privileges could leverage this vulnerability to achieve denial of service by planting a malicious file on the victim's local machine. User interaction is required before product installation to abuse this vulnerability. |
| CVE-2021-42980 | NoMachine Cloud Server is affected by Buffer Overflow. IOCTL Handler 0x22001B in the NoMachine Cloud Server above 4.0.346 and below 7.7.4 allow local attackers to execute arbitrary code in kernel mode or cause a denial of service (memory corruption and OS crash) via specially crafted I/O Request Packet. |
| CVE-2021-42979 | NoMachine Cloud Server is affected by Integer Overflow. IOCTL Handler 0x22001B in the NoMachine Cloud Server above 4.0.346 and below 7.7.4 allow local attackers to execute arbitrary code in kernel mode or cause a denial of service (memory corruption and OS crash) via specially crafted I/O Request Packet. |
| CVE-2021-42952 | Zepl Notebooks before 2021-10-25 are affected by a sandbox escape vulnerability. Upon launching Remote Code Execution from the Notebook, users can then use that to subsequently escape the running context sandbox and proceed to access internal Zepl assets including cloud metadata services. |
| CVE-2021-42852 | A command injection vulnerability was reported in some Lenovo Personal Cloud Storage devices that could allow an authenticated user to execute operating system commands by sending a crafted packet to the device. |
| CVE-2021-42851 | A vulnerability was reported in some Lenovo Personal Cloud Storage devices that could allow an unauthenticated user to create a standard user account. |
| CVE-2021-42850 | A weak default administrator password for the web interface and serial port was reported in some Lenovo Personal Cloud Storage devices that could allow unauthorized device access to an attacker with physical or local network access. |
| CVE-2021-42849 | A weak default password for the serial port was reported in some Lenovo Personal Cloud Storage devices that could allow unauthorized device access to an attacker with physical access. |
| CVE-2021-42848 | An information disclosure vulnerability was reported in some Lenovo Personal Cloud Storage devices that could allow an unauthenticated user to retrieve device and networking details. |
| CVE-2021-42701 | An attacker could prepare a specially crafted project file that, if opened, would attempt to connect to the cloud and trigger a man in the middle (MiTM) attack. This could allow an attacker to obtain credentials and take over the user’s cloud account. |
| CVE-2021-42135 | HashiCorp Vault and Vault Enterprise 1.8.x through 1.8.4 may have an unexpected interaction between glob-related policies and the Google Cloud secrets engine. Users may, in some situations, have more privileges than intended, e.g., a user with read permission for the /gcp/roleset/* path may be able to issue Google Cloud service account credentials. |
| CVE-2021-41556 | sqclass.cpp in Squirrel through 2.2.5 and 3.x through 3.1 allows an out-of-bounds read (in the core interpreter) that can lead to Code Execution. If a victim executes an attacker-controlled squirrel script, it is possible for the attacker to break out of the squirrel script sandbox even if all dangerous functionality such as File System functions has been disabled. An attacker might abuse this bug to target (for example) Cloud services that allow customization via SquirrelScripts, or distribute malware through video games that embed a Squirrel Engine. |
| CVE-2021-41437 | An HTTP response splitting attack in web application in ASUS RT-AX88U before v3.0.0.4.388.20558 allows an attacker to craft a specific URL that if an authenticated victim visits it, the URL will give access to the cloud storage of the attacker. |
| CVE-2021-41266 | Minio console is a graphical user interface for the for MinIO operator. Minio itself is a multi-cloud object storage project. Affected versions are subject to an authentication bypass issue in the Operator Console when an external IDP is enabled. All users on release v0.12.2 and before are affected and are advised to update to 0.12.3 or newer. Users unable to upgrade should add automountServiceAccountToken: false to the operator-console deployment in Kubernetes so no service account token will get mounted inside the pod, then disable the external identity provider authentication by unset the CONSOLE_IDP_URL, CONSOLE_IDP_CLIENT_ID, CONSOLE_IDP_SECRET and CONSOLE_IDP_CALLBACK environment variable and instead use the Kubernetes service account token. |
| CVE-2021-41251 | @sap-cloud-sdk/core contains the core functionality of the SAP Cloud SDK as well as the SAP Business Technology Platform abstractions. This affects applications on SAP Business Technology Platform that use the SAP Cloud SDK and enabled caching of destinations. In affected versions and in some cases, when user information was missing, destinations were cached without user information, allowing other users to retrieve the same destination with its permissions. By default, destination caching is disabled. The security for caching has been increased. The changes are released in version 1.52.0. Users unable to upgrade are advised to disable destination caching (it is disabled by default). |
| CVE-2021-41241 | Nextcloud server is a self hosted system designed to provide cloud style services. The groupfolders application for Nextcloud allows sharing a folder with a group of people. In addition, it allows setting "advanced permissions" on subfolders, for example, a user could be granted access to the groupfolder but not specific subfolders. Due to a lacking permission check in affected versions, a user could still access these subfolders by copying the groupfolder to another location. It is recommended that the Nextcloud Server is upgraded to 20.0.14, 21.0.6 or 22.2.1. Users unable to upgrade should disable the "groupfolders" application in the admin settings. |
| CVE-2021-41239 | Nextcloud server is a self hosted system designed to provide cloud style services. In affected versions the User Status API did not consider the user enumeration settings by the administrator. This allowed a user to enumerate other users on the instance, even when user listings where disabled. It is recommended that the Nextcloud Server is upgraded to 20.0.14, 21.0.6 or 22.2.1. There are no known workarounds. |
| CVE-2021-41192 | Redash is a package for data visualization and sharing. If an admin sets up Redash versions 10.0.0 and prior without explicitly specifying the `REDASH_COOKIE_SECRET` or `REDASH_SECRET_KEY` environment variables, a default value is used for both that is the same across all installations. In such cases, the instance is vulnerable to attackers being able to forge sessions using the known default value. This issue only affects installations where the `REDASH_COOKIE_SECRET or REDASH_SECRET_KEY` environment variables have not been explicitly set. This issue does not affect users of the official Redash cloud images, Redash's Digital Ocean marketplace droplets, or the scripts in the `getredash/setup` repository. These instances automatically generate unique secret keys during installation. One can verify whether one's instance is affected by checking the value of the `REDASH_COOKIE_SECRET` environment variable. If it is `c292a0a3aa32397cdb050e233733900f`, should follow the steps to secure the instance, outlined in the GitHub Security Advisory. |
| CVE-2021-41137 | Minio is a Kubernetes native application for cloud storage. All users on release `RELEASE.2021-10-10T16-53-30Z` are affected by a vulnerability that involves bypassing policy restrictions on regular users. Normally, checkKeyValid() should return owner true for rootCreds. In the affected version, policy restriction did not work properly for users who did not have service (svc) or security token service (STS) accounts. This issue is fixed in `RELEASE.2021-10-13T00-23-17Z`. A downgrade back to release `RELEASE.2021-10-08T23-58-24Z` is available as a workaround. |
| CVE-2021-40861 | A SQL Injection in the custom filter query component in Genesys intelligent Workload Distribution (IWD) 9.0.017.07 allows an attacker to execute arbitrary SQL queries via the value attribute, with which all data in the database can be extracted and OS command execution is possible depending on the permissions and/or database engine. |
| CVE-2021-40860 | A SQL Injection in the custom filter query component in Genesys intelligent Workload Distribution (IWD) before 9.0.013.11 allows an attacker to execute arbitrary SQL queries via the ql_expression parameter, with which all data in the database can be extracted and OS command execution is possible depending on the permissions and/or database engine. |
| CVE-2021-40722 | AEM Forms Cloud Service offering, as well as version 6.5.10.0 (and below) are affected by an XML External Entity (XXE) injection vulnerability that could be abused by an attacker to achieve RCE. |
| CVE-2021-40499 | Client-side printing services SAP Cloud Print Manager and SAPSprint for SAP NetWeaver Application Server for ABAP - versions 7.70, 7.70 PI, 7.70 BYD, allow an attacker to inject code that can be executed by the application. An attacker could thereby control the behavior of the application. |
| CVE-2021-40475 | Windows Cloud Files Mini Filter Driver Information Disclosure Vulnerability |
| CVE-2021-40186 | The AppCheck research team identified a Server-Side Request Forgery (SSRF) vulnerability within the DNN CMS platform, formerly known as DotNetNuke. SSRF vulnerabilities allow the attacker to exploit the target system to make network requests on their behalf, allowing a range of possible attacks. In the most common scenario, the attacker exploits SSRF vulnerabilities to attack systems behind the firewall and access sensitive information from Cloud Provider metadata services. |
| CVE-2021-40173 | Zoho ManageEngine Cloud Security Plus before Build 4117 allows a CSRF attack on the server proxy settings. |
| CVE-2021-39159 | BinderHub is a kubernetes-based cloud service that allows users to share reproducible interactive computing environments from code repositories. In affected versions a remote code execution vulnerability has been identified in BinderHub, where providing BinderHub with maliciously crafted input could execute code in the BinderHub context, with the potential to egress credentials of the BinderHub deployment, including JupyterHub API tokens, kubernetes service accounts, and docker registry credentials. This may provide the ability to manipulate images and other user created pods in the deployment, with the potential to escalate to the host depending on the underlying kubernetes configuration. Users are advised to update to version 0.2.0-n653. If users are unable to update they may disable the git repo provider by specifying the `BinderHub.repo_providers` as a workaround. |
| CVE-2021-39143 | Spinnaker is an open source, multi-cloud continuous delivery platform. A path traversal vulnerability was discovered in uses of TAR files by AppEngine for deployments. This uses a utility to extract files locally for deployment without validating the paths in that deployment don't override system files. This would allow an attacker to override files on the container, POTENTIALLY introducing a MITM type attack vector by replacing libraries or injecting wrapper files. Users are advised to update as soon as possible. For users unable to update disable Google AppEngine deployments and/or disable artifacts that provide TARs. |
| CVE-2021-39090 | IBM Cloud Pak for Security (CP4S) 1.10.0.0 through 1.10.6.0 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 216388. |
| CVE-2021-39089 | IBM Cloud Pak for Security (CP4S) 1.10.0.0 through 1.10.6.0 could allow an authenticated user to obtain sensitive information from a specially crafted HTTP request. IBM X-Force ID: 216387. |
| CVE-2021-39014 | IBM Cloud Object System 3.15.8.97 is vulnerable to stored cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 213650. |
| CVE-2021-39013 | IBM Cloud Pak for Security (CP4S) 1.7.2.0, 1.7.1.0, and 1.7.0.0 could allow an authenticated user to obtain sensitive information in HTTP responses that could be used in further attacks against the system. IBM X-Force ID: 213651. |
| CVE-2021-39011 | IBM Cloud Pak for Security (CP4S) 1.10.0.0 through 1.10.6.0 stores potentially sensitive information in log files that could be read by a privileged user. IBM X-Force ID: 213645. |
| CVE-2021-38971 | IBM Data Virtualization on Cloud Pak for Data 1.3.0, 1.4.1, 1.5.0, 1.7.1 and 1.7.3 could allow an authorized user to bypass data masking rules and obtain sensitve information. IBM X-Force ID: 212620. |
| CVE-2021-38966 | IBM Cloud Pak for Automation 21.0.2 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 212357. |
| CVE-2021-38899 | IBM Cloud Pak for Data 2.5 could allow a local user with special privileges to obtain highly sensitive information. IBM X-Force ID: 209575. |
| CVE-2021-38870 | IBM Aspera Cloud is vulnerable to stored cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 208343. |
| CVE-2021-38681 | A reflected cross-site scripting (XSS) vulnerability has been reported to affect QNAP NAS running Ragic Cloud DB. If exploited, this vulnerability allows remote attackers to inject malicious code. QNAP have already disabled and removed Ragic Cloud DB from the QNAP App Center, pending a security patch from Ragic. |
| CVE-2021-38505 | Microsoft introduced a new feature in Windows 10 known as Cloud Clipboard which, if enabled, will record data copied to the clipboard to the cloud, and make it available on other computers in certain scenarios. Applications that wish to prevent copied data from being recorded in Cloud History must use specific clipboard formats; and Firefox before versions 94 and ESR 91.3 did not implement them. This could have caused sensitive data to be recorded to a user's Microsoft account. *This bug only affects Firefox for Windows 10+ with Cloud Clipboard enabled. Other operating systems are unaffected.*. This vulnerability affects Firefox < 94, Thunderbird < 91.3, and Firefox ESR < 91.3. |
| CVE-2021-38486 | InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 cloud portal allows for self-registration of the affected product without any requirements to create an account, which may allow an attacker to have full control over the product and execute code within the internal network to which the product is connected. |
| CVE-2021-37694 | @asyncapi/java-spring-cloud-stream-template generates a Spring Cloud Stream (SCSt) microservice. In versions prior to 0.7.0 arbitrary code injection was possible when an attacker controls the AsyncAPI document. An example is provided in GHSA-xj6r-2jpm-qvxp. There are no mitigations available and all users are advised to update. |
| CVE-2021-37317 | Directory Traversal vulnerability in Cloud Disk in ASUS RT-AC68U router firmware version before 3.0.0.4.386.41634 allows remote attackers to write arbitrary files via improper sanitation on the target for COPY and MOVE operations. |
| CVE-2021-37316 | SQL injection vulnerability in Cloud Disk in ASUS RT-AC68U router firmware version before 3.0.0.4.386.41634 allows remote attackers to view sensitive information via /etc/shadow. |
| CVE-2021-37315 | Incorrect Access Control issue discoverd in Cloud Disk in ASUS RT-AC68U router firmware version before 3.0.0.4.386.41634 allows remote attackers to write arbitrary files via improper sanitation on the source for COPY and MOVE operations. |
| CVE-2021-36696 | Deskpro cloud and on-premise Deskpro 2021.1.6 and fixed in Deskpro 2021.1.7 contains a cross-site scripting (XSS) vulnerability in social media links on a user profile due to lack of input validation. |
| CVE-2021-36695 | Deskpro cloud and on-premise Deskpro 2021.1.6 and fixed in Deskpro 2021.1.7 contains a cross-site scripting (XSS) vulnerability in the download file feature on a manager profile due to lack of input validation. |
| CVE-2021-36226 | Western Digital My Cloud devices before OS5 do not use cryptographically signed Firmware upgrade files. |
| CVE-2021-36225 | Western Digital My Cloud devices before OS5 allow REST API access by low-privileged accounts, as demonstrated by API commands for firmware uploads and installation. |
| CVE-2021-36224 | Western Digital My Cloud devices before OS5 have a nobody account with a blank password. |
| CVE-2021-35689 | A potential vulnerability in the Oracle Talent Acquisition Cloud - Taleo Enterprise Edition. This high severity potential vulnerability allows attackers to perform remote code execution on Taleo Enterprise Edition system. Successful attacks of this vulnerability can result in unauthorized remote code execution within Taleo Enterprise Edition and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Talent Acquisition Cloud - Taleo Enterprise Edition. All affected customers were notified of CVE-2021-35689 by Oracle. |
| CVE-2021-35599 | Vulnerability in the Zero Downtime DB Migration to Cloud component of Oracle Database Server. The supported version that is affected is 21c. Easily exploitable vulnerability allows high privileged attacker having Local Logon privilege with logon to the infrastructure where Zero Downtime DB Migration to Cloud executes to compromise Zero Downtime DB Migration to Cloud. While the vulnerability is in Zero Downtime DB Migration to Cloud, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Zero Downtime DB Migration to Cloud. CVSS 3.1 Base Score 8.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H). |
| CVE-2021-34690 | iDrive RemotePC before 7.6.48 on Windows allows authentication bypass. A remote and unauthenticated attacker can bypass cloud authentication to connect and control a system via TCP port 5970 and 5980. |
| CVE-2021-3429 | When instructing cloud-init to set a random password for a new user account, versions before 21.2 would write that password to the world-readable log file /var/log/cloud-init-output.log. This could allow a local user to log in as another user. |
| CVE-2021-33784 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2021-33695 | Potentially, SAP Cloud Connector, version - 2.0 communication with the backend is accepted without sufficient validation of the certificate. |
| CVE-2021-33694 | SAP Cloud Connector, version - 2.0, does not sufficiently encode user-controlled inputs, allowing an attacker with Administrator rights, to include malicious codes that get stored in the database, and when accessed, could be executed in the application, resulting in Stored Cross-Site Scripting. |
| CVE-2021-33693 | SAP Cloud Connector, version - 2.0, allows an authenticated administrator to modify a configuration file to inject malicious codes that could potentially lead to OS command execution. |
| CVE-2021-33692 | SAP Cloud Connector, version - 2.0, allows the upload of zip files as backup. This backup file can be tricked to inject special elements such as '..' and '/' separators, for attackers to escape outside of the restricted location to access files or directories. |
| CVE-2021-33666 | When SAP Commerce Cloud version 100, hosts a JavaScript storefront, it is vulnerable to MIME sniffing, which, in certain circumstances, could be used to facilitate an XSS attack or malware proliferation. |
| CVE-2021-3310 | Western Digital My Cloud OS 5 devices before 5.10.122 mishandle Symbolic Link Following on SMB and AFP shares. This can lead to code execution and information disclosure (by reading local files). |
| CVE-2021-32802 | Nextcloud server is an open source, self hosted personal cloud. Nextcloud supports rendering image previews for user provided file content. For some image types, the Nextcloud server was invoking a third-party library that wasn't suited for untrusted user-supplied content. There are several security concerns with passing user-generated content to this library, such as Server-Side-Request-Forgery, file disclosure or potentially executing code on the system. The risk depends on your system configuration and the installed library version. It is recommended that the Nextcloud Server is upgraded to 20.0.12, 21.0.4 or 22.1.0. These versions do not use this library anymore. As a workaround users may disable previews by setting `enable_previews` to `false` in `config.php`. |
| CVE-2021-32801 | Nextcloud server is an open source, self hosted personal cloud. In affected versions logging of exceptions may have resulted in logging potentially sensitive key material for the Nextcloud Encryption-at-Rest functionality. It is recommended that the Nextcloud Server is upgraded to 20.0.12, 21.0.4 or 22.1.0. If upgrading is not an option users are advised to disable system logging to resolve this issue until such time that an upgrade can be performed Note that ff you do not use the Encryption-at-Rest functionality of Nextcloud you are not affected by this bug. |
| CVE-2021-32800 | Nextcloud server is an open source, self hosted personal cloud. In affected versions an attacker is able to bypass Two Factor Authentication in Nextcloud. Thus knowledge of a password, or access to a WebAuthN trusted device of a user was sufficient to gain access to an account. It is recommended that the Nextcloud Server is upgraded to 20.0.12, 21.0.4 or 22.1.0. There are no workaround for this vulnerability. |
| CVE-2021-32717 | Shopware is an open source eCommerce platform. In versions prior to 6.4.1.1 private files publicly accessible with Cloud Storage providers when the hashed URL is known. Users are recommend to first change their configuration to set the correct visibility according to the documentation. The visibility must be at the same level as `type`. When the Storage is saved on Amazon AWS we recommending disabling public access to the bucket containing the private files: https://docs.aws.amazon.com/AmazonS3/latest/userguide/access-control-block-public-access.html. Otherwise, update to Shopware 6.4.1.1 or install or update the Security plugin (https://store.shopware.com/en/detail/index/sArticle/518463/number/Swag136939272659) and run the command `./bin/console s3:set-visibility` to correct your cloud file visibilities. |
| CVE-2021-32700 | Ballerina is an open source programming language and platform for cloud application programmers. Ballerina versions 1.2.x and SL releases up to alpha 3 have a potential for a supply chain attack via MiTM against users. Http connections did not make use of TLS and certificate checking was ignored. The vulnerability allows an attacker to substitute or modify packages retrieved from BC thus allowing to inject malicious code into ballerina executables. This has been patched in Ballerina 1.2.14 and Ballerina SwanLake alpha4. |
| CVE-2021-32658 | Nextcloud Android is the Android client for the Nextcloud open source home cloud system. Due to a timeout issue the Android client may not properly clean all sensitive data on account removal. This could include sensitive key material such as the End-to-End encryption keys. It is recommended that the Nextcloud Android App is upgraded to 3.16.1 |
| CVE-2021-31969 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2021-31929 | Annex Cloud Loyalty Experience Platform <2021.1.0.1 allows any authenticated attacker to modify loyalty campaigns and settings, such as fraud prevention, coupon groups, email templates, or referrals. |
| CVE-2021-31928 | Annex Cloud Loyalty Experience Platform <2021.1.0.1 allows any authenticated attacker to escalate privileges to superadministrator. It was fixed in v2021.1.0.2. |
| CVE-2021-31927 | An Insecure Direct Object Reference (IDOR) vulnerability in Annex Cloud Loyalty Experience Platform <2021.1.0.1 allows any authenticated attacker to modify any existing user, including users assigned to different environments and clients. It was fixed in v2021.1.0.2. |
| CVE-2021-3043 | A reflected cross-site scripting (XSS) vulnerability exists in the Prisma Cloud Compute web console that enables a remote attacker to execute arbitrary JavaScript code in the browser-based web console while an authenticated administrator is using that web interface. Prisma Cloud Compute SaaS versions were automatically upgraded to the fixed release. No additional action is required for these instances. This issue impacts: Prisma Cloud Compute 20.12 versions earlier than Prisma Cloud Compute 20.12.552; Prisma Cloud Compute 21.04 versions earlier than Prisma Cloud Compute 21.04.439. |
| CVE-2021-3040 | An unsafe deserialization vulnerability in Bridgecrew Checkov by Prisma Cloud allows arbitrary code execution when processing a malicious terraform file. This issue impacts Checkov 2.0 versions earlier than Checkov 2.0.139. Checkov 1.0 versions are not impacted. |
| CVE-2021-3039 | An information exposure through log file vulnerability exists in the Palo Alto Networks Prisma Cloud Compute Console where a secret used to authorize the role of the authenticated user is logged to a debug log file. Authenticated Operator role and Auditor role users with access to the debug log files can use this secret to gain Administrator role access for their active session in Prisma Cloud Compute. Prisma Cloud Compute SaaS versions were automatically upgraded to the fixed release. This issue impacts all Prisma Cloud Compute versions earlier than Prisma Cloud Compute 21.04.412. |
| CVE-2021-3035 | An unsafe deserialization vulnerability in Bridgecrew Checkov by Prisma Cloud allows arbitrary code execution when processing a malicious terraform file. This issue impacts Checkov 2.0 versions earlier than Checkov 2.0.26. Checkov 1.0 versions are not impacted. |
| CVE-2021-3033 | An improper verification of cryptographic signature vulnerability exists in the Palo Alto Networks Prisma Cloud Compute console. This vulnerability enables an attacker to bypass signature validation during SAML authentication by logging in to the Prisma Cloud Compute console as any authorized user. This issue impacts: All versions of Prisma Cloud Compute 19.11, Prisma Cloud Compute 20.04, and Prisma Cloud Compute 20.09; Prisma Cloud Compute 20.12 before update 1. Prisma Cloud Compute SaaS version is not impacted by this vulnerability. |
| CVE-2021-29979 | Hubs Cloud allows users to download shared content, specifically HTML and JS, which could allow javascript execution in the Hub Cloud instance’s primary hosting domain.*. This vulnerability affects Hubs Cloud < mozillareality/reticulum/1.0.1/20210618012634. |
| CVE-2021-29954 | Proxy functionality built into Hubs Cloud’s Reticulum software allowed access to internal URLs, including the metadata service. This vulnerability affects Hubs Cloud < mozillareality/reticulum/1.0.1/20210428201255. |
| CVE-2021-29906 | IBM App Connect Enterprise Certified Container 1.0, 1.1, 1.2, 1.3, 1.4 and 1.5 could disclose sensitive information to a local user when it is configured to use an IBM Cloud API key to connect to cloud-based connectors. IBM X-Force ID: 207630. |
| CVE-2021-29894 | IBM Cloud Pak for Security (CP4S) 1.7.0.0, 1.7.1.0, 1.7.2.0, and 1.8.0.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 207320. |
| CVE-2021-29872 | IBM Cloud Pak for Automation 21.0.1 and 21.0.2 - Business Automation Studio Component is vulnerable to HTTP header injection, caused by improper validation of input by the HOST headers. By sending a specially crafted HTTP request, a remote attacker could exploit this vulnerability to inject HTTP HOST header, which will allow the attacker to conduct various attacks against the vulnerable system, including cross-site scripting, cache poisoning or session hijacking. IBM X-Force ID: 206228. |
| CVE-2021-29859 | IBM ICP4A - User Management System Component (IBM Cloud Pak for Business Automation V21.0.3 through V21.0.3-IF008, V21.0.2 through V21.0.2-IF009, and V21.0.1 through V21.0.1-IF007) could allow a user with physical access to the system to perform unauthorized actions or obtain sensitive information due to insufficient validation and recvocation another user logouting out. IBM X-Force ID: 206081. |
| CVE-2021-29775 | IBM Business Automation Workflow 19.0.03 and 20.0 and IBM Cloud Pak for Automation 20.0.3-IF002 and 21.0.1 are vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 203029. |
| CVE-2021-29768 | IBM Cognos Analytics 11.1.7, 11.2.0, and 11.2.1 could allow a low level user to obtain sensitive information from the details of the 'Cloud Storage' page for which they should not have access. IBM X-Force ID: 202682. |
| CVE-2021-29697 | IBM Cloud Pak for Security (CP4S) 1.5.0.0, 1.5.1.0, 1.6.0.0, 1.6.1.0, 1.7.0.0, and 1.7.1.0 could allow a remote authenticated attacker to obtain sensitive information through HTTP requests that could be used in further attacks against the system. |
| CVE-2021-29696 | IBM Cloud Pak for Security (CP4S) 1.5.0.0, 1.5.1.0, 1.6.0.0, 1.6.1.0, 1.7.0.0, and 1.7.1.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. |
| CVE-2021-29492 | Envoy is a cloud-native edge/middle/service proxy. Envoy does not decode escaped slash sequences `%2F` and `%5C` in HTTP URL paths in versions 1.18.2 and before. A remote attacker may craft a path with escaped slashes, e.g. `/something%2F..%2Fadmin`, to bypass access control, e.g. a block on `/admin`. A backend server could then decode slash sequences and normalize path and provide an attacker access beyond the scope provided for by the access control policy. ### Impact Escalation of Privileges when using RBAC or JWT filters with enforcement based on URL path. Users with back end servers that interpret `%2F` and `/` and `%5C` and `\` interchangeably are impacted. ### Attack Vector URL paths containing escaped slash characters delivered by untrusted client. Patches in versions 1.18.3, 1.17.3, 1.16.4, 1.15.5 contain new path normalization option to decode escaped slash characters. As a workaround, if back end servers treat `%2F` and `/` and `%5C` and `\` interchangeably and a URL path based access control is configured, one may reconfigure the back end server to not treat `%2F` and `/` and `%5C` and `\` interchangeably. |
| CVE-2021-28633 | Adobe Creative Cloud Desktop Application (installer) version 2.4 (and earlier) is affected by an Insecure temporary file creation vulnerability. An attacker could leverage this vulnerability to cause arbitrary file overwriting in the context of the current user. Exploitation of this issue requires physical interaction to the system. |
| CVE-2021-28628 | Adobe Experience Manager Cloud Service offering, as well as versions 6.5.8.0 (and below) is affected by a Cross-Site Scripting (XSS) vulnerability that could be abused by an attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field. |
| CVE-2021-28627 | Adobe Experience Manager Cloud Service offering, as well as versions 6.5.8.0 (and below) is affected by a Server-side Request Forgery. An authenticated attacker could leverage this vulnerability to contact systems blocked by the dispatcher. Exploitation of this issue does not require user interaction. |
| CVE-2021-28626 | Adobe Experience Manager Cloud Service offering, as well as versions 6.5.8.0 (and below) is affected by an Improper Authorization vulnerability allowing users to create nodes under a location. An unauthenticated attacker could leverage this vulnerability to cause an application denial-of-service. Exploitation of this issue does not require user interaction. |
| CVE-2021-28625 | Adobe Experience Manager Cloud Service offering, as well as versions 6.5.8.0 (and below) is affected by a Cross-Site Scripting (XSS) vulnerability that could be abused by an attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field. |
| CVE-2021-28613 | Adobe Creative Cloud Desktop Application version 5.4 (and earlier) is affected by a file handling vulnerability that could allow an attacker to arbitrarily overwrite a file. Exploitation of this issue requires local access, administrator privileges and user interaction. |
| CVE-2021-28594 | Adobe Creative Cloud Desktop Application (installer) version 2.4 (and earlier) is affected by an Uncontrolled Search Path Element vulnerability. An unauthenticated attacker could leverage this vulnerability to achieve arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| CVE-2021-28581 | Adobe Creative Cloud Desktop 3.5 (and earlier) is affected by an uncontrolled search path vulnerability that could result in elevation of privileges. Exploitation of this issue requires user interaction in that a victim must log on to the attacker's local machine. |
| CVE-2021-28547 | Adobe Creative Cloud Desktop Application for macOS version 5.3 (and earlier) is affected by a privilege escalation vulnerability that could allow a normal user to delete the OOBE directory and get permissions of any directory under the administrator authority. |
| CVE-2021-27899 | The Proofpoint Insider Threat Management Agents (formerly ObserveIT Agent) for MacOS and Linux perform improper validation of the ITM Server's certificate, which enables a remote attacker to intercept and alter these communications using a man-in-the-middle attack. All versions before 7.11.1 are affected. Agents for Windows and Cloud are not affected. |
| CVE-2021-27503 | Ypsomed mylife Cloud, mylife Mobile Application, Ypsomed mylife Cloud: All versions prior to 1.7.2, Ypsomed mylife App: All versions prior to 1.7.5,The application encrypts on the application layer of the communication protocol between the Ypsomed mylife App and mylife Cloud credentials based on hard-coded secrets, which allows man-in-the-middle attackers to tamper with messages. |
| CVE-2021-27499 | Ypsomed mylife Cloud, mylife Mobile Application, Ypsomed mylife Cloud: All versions prior to 1.7.2, Ypsomed mylife App: All versions prior to 1.7.5,The application layer encryption of the communication protocol between the Ypsomed mylife App and mylife Cloud uses non-random IVs, which allows man-in-the-middle attackers to tamper with messages. |
| CVE-2021-27495 | Ypsomed mylife Cloud, mylife Mobile Application:Ypsomed mylife Cloud,All versions prior to 1.7.2,Ypsomed mylife App,All versions prior to 1.7.5,he Ypsomed mylife Cloud reflects the user password during the login process after redirecting the user from a HTTPS endpoint to a HTTP endpoint. |
| CVE-2021-27491 | Ypsomed mylife Cloud, mylife Mobile Application:Ypsomed mylife Cloud,All versions prior to 1.7.2,Ypsomed mylife App,All versions prior to 1.7.5,The Ypsomed mylife Cloud discloses password hashes during the registration process. |
| CVE-2021-27002 | NetApp Cloud Manager versions prior to 3.9.10 are susceptible to a vulnerability which could allow a remote unauthenticated attacker to retrieve sensitive data via the web proxy. |
| CVE-2021-26999 | NetApp Cloud Manager versions prior to 3.9.9 log sensitive information when an Active Directory connection fails. The logged information is available only to authenticated users. Customers with auto-upgrade enabled should already be on a fixed version while customers using on-prem connectors with auto-upgrade disabled are advised to upgrade to a fixed version. |
| CVE-2021-26998 | NetApp Cloud Manager versions prior to 3.9.9 log sensitive information that is available only to authenticated users. Customers with auto-upgrade enabled should already be on a fixed version while customers using on-prem connectors with auto-upgrade disabled are advised to upgrade to a fixed version. |
| CVE-2021-26992 | Cloud Manager versions prior to 3.9.4 are susceptible to a vulnerability which could allow a remote attacker to cause a Denial of Service (DoS). |
| CVE-2021-26991 | Cloud Manager versions prior to 3.9.4 contain an insecure Cross-Origin Resource Sharing (CORS) policy which could allow a remote attacker to interact with Cloud Manager. |
| CVE-2021-26990 | Cloud Manager versions prior to 3.9.4 are susceptible to a vulnerability that could allow a remote attacker to overwrite arbitrary system files. |
| CVE-2021-26918 | ** DISPUTED ** The ProBot bot through 2021-02-08 for Discord might allow attackers to interfere with the intended purpose of the "Send an image when a user joins the server" feature (or possibly have unspecified other impact) because the uploader web service allows double extensions (such as .html.jpg) with the text/html content type. NOTE: there may not be cases in which an uploader web service is customer controlled; however, the nature of the issue has substantial interaction with customer controlled configuration. NOTE: the vendor states "This is just an uploader (like any other one) which uploads files to cloud storage and accepts various file types. There is no kind of vulnerability and it won't compromise either the client side or the server side." |
| CVE-2021-26787 | A cross site scripting (XSS) vulnerability in Genesys Workforce Management 8.5.214.20 can occur (during record deletion) via the Time-off parameter. |
| CVE-2021-25368 | Hijacking vulnerability in Samsung Cloud prior to version 4.7.0.3 allows attackers to intercept when the provider is executed. |
| CVE-2021-25321 | A UNIX Symbolic Link (Symlink) Following vulnerability in arpwatch of SUSE Linux Enterprise Server 11-SP4-LTSS, SUSE Manager Server 4.0, SUSE OpenStack Cloud Crowbar 9; openSUSE Factory, Leap 15.2 allows local attackers with control of the runtime user to run arpwatch as to escalate to root upon the next restart of arpwatch. This issue affects: SUSE Linux Enterprise Server 11-SP4-LTSS arpwatch versions prior to 2.1a15. SUSE Manager Server 4.0 arpwatch versions prior to 2.1a15. SUSE OpenStack Cloud Crowbar 9 arpwatch versions prior to 2.1a15. openSUSE Factory arpwatch version 2.1a15-169.5 and prior versions. openSUSE Leap 15.2 arpwatch version 2.1a15-lp152.5.5 and prior versions. |
| CVE-2021-25320 | A Improper Access Control vulnerability in Rancher, allows users in the cluster to make request to cloud providers by creating requests with the cloud-credential ID. Rancher in this case would attach the requested credentials without further checks This issue affects: Rancher versions prior to 2.5.9; Rancher versions prior to 2.4.16. |
| CVE-2021-25317 | A Incorrect Default Permissions vulnerability in the packaging of cups of SUSE Linux Enterprise Server 11-SP4-LTSS, SUSE Manager Server 4.0, SUSE OpenStack Cloud Crowbar 9; openSUSE Leap 15.2, Factory allows local attackers with control of the lp users to create files as root with 0644 permissions without the ability to set the content. This issue affects: SUSE Linux Enterprise Server 11-SP4-LTSS cups versions prior to 1.3.9. SUSE Manager Server 4.0 cups versions prior to 2.2.7. SUSE OpenStack Cloud Crowbar 9 cups versions prior to 1.7.5. openSUSE Leap 15.2 cups versions prior to 2.2.7. openSUSE Factory cups version 2.3.3op2-2.1 and prior versions. |
| CVE-2021-25298 | Nagios XI version xi-5.7.5 is affected by OS command injection. The vulnerability exists in the file /usr/local/nagiosxi/html/includes/configwizards/cloud-vm/cloud-vm.inc.php due to improper sanitization of authenticated user-controlled input by a single HTTP request, which can lead to OS command injection on the Nagios XI server. |
| CVE-2021-24682 | The Cool Tag Cloud WordPress plugin before 2.26 does not escape the style attribute of the cool_tag_cloud shortcode, which could allow users with a role as low as Contributor to perform Stored Cross-Site Scripting attacks. |
| CVE-2021-23884 | Cleartext Transmission of Sensitive Information vulnerability in the ePO Extension of McAfee Content Security Reporter (CSR) prior to 2.8.0 allows an ePO administrator to view the unencrypted password of the McAfee Web Gateway (MWG) or the password of the McAfee Web Gateway Cloud Server (MWGCS) read only user used to retrieve log files for analysis in CSR. |
| CVE-2021-23211 | Cleartext Storage of Sensitive Information in Memory vulnerability in Gallagher Command Centre Server allows Cloud end-to-end encryption key to be discoverable in server memory dumps. This issue affects: Gallagher Command Centre 8.40 versions prior to 8.40.1888 (MR3). |
| CVE-2021-2320 | Vulnerability in the Oracle Cloud Infrastructure Storage Gateway product of Oracle Storage Gateway (component: Management Console). The supported version that is affected is Prior to 1.4. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Cloud Infrastructure Storage Gateway. While the vulnerability is in Oracle Cloud Infrastructure Storage Gateway, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Oracle Cloud Infrastructure Storage Gateway. Note: Updating the Oracle Cloud Infrastructure Storage Gateway to version 1.4 or later will address these vulnerabilities. Download the latest version of Oracle Cloud Infrastructure Storage Gateway from <a href=" https://www.oracle.com/downloads/cloud/oci-storage-gateway-downloads.html">here. Refer to Document <a href="https://support.oracle.com/rs?type=doc&id=2768897.1">2768897.1 for more details. CVSS 3.1 Base Score 9.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H). |
| CVE-2021-2319 | Vulnerability in the Oracle Cloud Infrastructure Storage Gateway product of Oracle Storage Gateway (component: Management Console). The supported version that is affected is Prior to 1.4. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Cloud Infrastructure Storage Gateway. While the vulnerability is in Oracle Cloud Infrastructure Storage Gateway, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Oracle Cloud Infrastructure Storage Gateway. Note: Updating the Oracle Cloud Infrastructure Storage Gateway to version 1.4 or later will address these vulnerabilities. Download the latest version of Oracle Cloud Infrastructure Storage Gateway from <a href=" https://www.oracle.com/downloads/cloud/oci-storage-gateway-downloads.html">here. Refer to Document <a href="https://support.oracle.com/rs?type=doc&id=2768897.1">2768897.1 for more details. CVSS 3.1 Base Score 9.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H). |
| CVE-2021-2318 | Vulnerability in the Oracle Cloud Infrastructure Storage Gateway product of Oracle Storage Gateway (component: Management Console). The supported version that is affected is Prior to 1.4. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Cloud Infrastructure Storage Gateway. While the vulnerability is in Oracle Cloud Infrastructure Storage Gateway, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Oracle Cloud Infrastructure Storage Gateway. Note: Updating the Oracle Cloud Infrastructure Storage Gateway to version 1.4 or later will address these vulnerabilities. Download the latest version of Oracle Cloud Infrastructure Storage Gateway from <a href=" https://www.oracle.com/downloads/cloud/oci-storage-gateway-downloads.html">here. Refer to Document <a href="https://support.oracle.com/rs?type=doc&id=2768897.1">2768897.1 for more details. CVSS 3.1 Base Score 9.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H). |
| CVE-2021-2317 | Vulnerability in the Oracle Cloud Infrastructure Storage Gateway product of Oracle Storage Gateway (component: Management Console). The supported version that is affected is Prior to 1.4. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Cloud Infrastructure Storage Gateway. While the vulnerability is in Oracle Cloud Infrastructure Storage Gateway, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Oracle Cloud Infrastructure Storage Gateway. Note: Updating the Oracle Cloud Infrastructure Storage Gateway to version 1.4 or later will address these vulnerabilities. Download the latest version of Oracle Cloud Infrastructure Storage Gateway from <a href=" https://www.oracle.com/downloads/cloud/oci-storage-gateway-downloads.html">here. Refer to Document <a href="https://support.oracle.com/rs?type=doc&id=2768897.1">2768897.1 for more details. CVSS 3.1 Base Score 10.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H). |
| CVE-2021-23162 | Improper validation of the cloud certificate chain in Mobile Connect allows man-in-the-middle attack to impersonate the legitimate Command Centre Server. This issue affects: Gallagher Command Centre Mobile Connect for Android 15 versions prior to 15.04.040; version 14 and prior versions. |
| CVE-2021-23155 | Improper validation of the cloud certificate chain in Mobile Client allows man-in-the-middle attack to impersonate the legitimate Command Centre Server. This issue affects: Gallagher Command Centre Mobile Client for Android 8.60 versions prior to 8.60.065; version 8.50 and prior versions. |
| CVE-2021-22969 | Concrete CMS (formerly concrete5) versions below 8.5.7 has a SSRF mitigation bypass using DNS Rebind attack giving an attacker the ability to fetch cloud IAAS (ex AWS) IAM keys.To fix this Concrete CMS no longer allows downloads from the local network and specifies the validated IP when downloading rather than relying on DNS.Discoverer: Adrian Tiron from FORTBRIDGE ( https://www.fortbridge.co.uk/ )The Concrete CMS team gave this a CVSS 3.1 score of 3.5 AV:N/AC:H/PR:L/UI:N/S:C/C:L/I:N/A:N . Please note that Cloud IAAS provider mis-configurations are not Concrete CMS vulnerabilities. A mitigation for this vulnerability is to make sure that the IMDS configurations are according to a cloud provider's best practices.This fix is also in Concrete version 9.0.0 |
| CVE-2021-22914 | Citrix Cloud Connector before 6.31.0.62192 suffers from insecure storage of sensitive information due to sensitive information being stored in the Citrix Cloud Connector installation log files. Such information could be used by an malicious actor to access a Citrix Cloud environment. This issue affects all versions of Citrix Cloud Connector that were installed by passing secure client parameters for installation via the command line. The issue does not affect Citrix Cloud Connector if it was installed using the interactive installer or where a parameter file was used with the command-line installer. |
| CVE-2021-22855 | The specific function of HR Portal of Soar Cloud System accepts any type of object to be deserialized. Attackers can send malicious serialized objects to execute arbitrary commands. |
| CVE-2021-22854 | The HR Portal of Soar Cloud System fails to filter specific parameters. Remote attackers can inject SQL syntax and obtain all data in the database without privilege. |
| CVE-2021-22853 | The HR Portal of Soar Cloud System fails to manage access control. While obtaining user ID, remote attackers can access sensitive data via a specific data packet, such as user’s login information, further causing the login function not to work. |
| CVE-2021-2257 | Vulnerability in the Oracle Storage Cloud Software Appliance product of Oracle Storage Gateway (component: Management Console). The supported version that is affected is Prior to 16.3.1.4.2. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Storage Cloud Software Appliance. While the vulnerability is in Oracle Storage Cloud Software Appliance, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Storage Cloud Software Appliance accessible data. Note: Updating the Oracle Storage Cloud Software Appliance to version 16.3.1.4.2 or later will address these vulnerabilities. Download the latest version of Oracle Storage Cloud Software Appliance from <a href=" https://www.oracle.com/downloads/cloud/oscsa-downloads.html">here. Refer to Document <a href="https://support.oracle.com/rstype=doc&id=2768897.1">2768897.1 for more details. CVSS 3.1 Base Score 4.1 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:N). |
| CVE-2021-2256 | Vulnerability in the Oracle Storage Cloud Software Appliance product of Oracle Storage Gateway (component: Management Console). The supported version that is affected is Prior to 16.3.1.4.2. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Storage Cloud Software Appliance. While the vulnerability is in Oracle Storage Cloud Software Appliance, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Oracle Storage Cloud Software Appliance. Note: Updating the Oracle Storage Cloud Software Appliance to version 16.3.1.4.2 or later will address these vulnerabilities. Download the latest version of Oracle Storage Cloud Software Appliance from <a href=" https://www.oracle.com/downloads/cloud/oscsa-downloads.html">here. Refer to Document <a href="https://support.oracle.com/rstype=doc&id=2768897.1">2768897.1 for more details. CVSS 3.1 Base Score 10.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H). |
| CVE-2021-22547 | In IoT Devices SDK, there is an implementation of calloc() that doesn't have a length check. An attacker could pass in memory objects larger than the buffer and wrap around to have a smaller buffer than required, allowing the attacker access to the other parts of the heap. We recommend upgrading the Google Cloud IoT Device SDK for Embedded C used to 1.0.3 or greater. |
| CVE-2021-22272 | The vulnerability origins in the commissioning process where an attacker of the ControlTouch can enter a serial number in a specific way to transfer the device virtually into her/his my.busch-jaeger.de or mybuildings.abb.com profile. A successful attacker can observe and control a ControlTouch remotely under very specific circumstances. The issue is fixed in the cloud side of the system. No firmware update is needed for customer products. If a user wants to understand if (s)he is affected, please read the advisory. This issue affects: ABB and Busch-Jaeger, ControlTouch |
| CVE-2021-22262 | Missing access control in all GitLab versions starting from 13.12 before 14.0.9, all versions starting from 14.1 before 14.1.4, and all versions starting from 14.2 before 14.2.2 with Jira Cloud integration enabled allows Jira users without administrative privileges to add and remove Jira Connect Namespaces via the GitLab.com for Jira Cloud application configuration page |
| CVE-2021-22159 | Insider Threat Management Windows Agent Local Privilege Escalation Vulnerability The Proofpoint Insider Threat Management (formerly ObserveIT) Agent for Windows before 7.4.3, 7.5.4, 7.6.5, 7.7.5, 7.8.4, 7.9.3, 7.10.2, and 7.11.0.25 as well as versions 7.3 and earlier is missing authentication for a critical function, which allows a local authenticated Windows user to run arbitrary commands with the privileges of the Windows SYSTEM user. Agents for MacOS, Linux, and ITM Cloud are not affected. |
| CVE-2021-22146 | All versions of Elastic Cloud Enterprise has the Elasticsearch “anonymous” user enabled by default in deployed clusters. While in the default setting the anonymous user has no permissions and is unable to successfully query any Elasticsearch APIs, an attacker could leverage the anonymous user to gain insight into certain details of a deployed cluster. |
| CVE-2021-22115 | Cloud Controller API versions prior to 1.106.0 logs service broker credentials if the default value of db logging config field is changed. CAPI database logs service broker password in plain text whenever a job to clean up orphaned items is run by Cloud Controller. |
| CVE-2021-22113 | Applications using the “Sensitive Headers” functionality in Spring Cloud Netflix Zuul 2.2.6.RELEASE and below may be vulnerable to bypassing the “Sensitive Headers” restriction when executing requests with specially constructed URLs. Applications that use Spring Security's StrictHttpFirewall (enabled by default for all URLs) are not affected by the vulnerability, as they reject requests that allow bypassing. |
| CVE-2021-22101 | Cloud Controller versions prior to 1.118.0 are vulnerable to unauthenticated denial of Service(DoS) vulnerability allowing unauthenticated attackers to cause denial of service by using REST HTTP requests with label_selectors on multiple V3 endpoints by generating an enormous SQL query. |
| CVE-2021-22100 | In cloud foundry CAPI versions prior to 1.122, a denial-of-service attack in which a developer can push a service broker that (accidentally or maliciously) causes CC instances to timeout and fail is possible. An attacker can leverage this vulnerability to cause an inability for anyone to push or manage apps. |
| CVE-2021-22053 | Applications using both `spring-cloud-netflix-hystrix-dashboard` and `spring-boot-starter-thymeleaf` expose a way to execute code submitted within the request URI path during the resolution of view templates. When a request is made at `/hystrix/monitor;[user-provided data]`, the path elements following `hystrix/monitor` are being evaluated as SpringEL expressions, which can lead to code execution. |
| CVE-2021-22051 | Applications using Spring Cloud Gateway are vulnerable to specifically crafted requests that could make an extra request on downstream services. Users of affected versions should apply the following mitigation: 3.0.x users should upgrade to 3.0.5+, 2.2.x users should upgrade to 2.2.10.RELEASE or newer. |
| CVE-2021-22044 | In Spring Cloud OpenFeign 3.0.0 to 3.0.4, 2.2.0.RELEASE to 2.2.9.RELEASE, and older unsupported versions, applications using type-level `@RequestMapping`annotations over Feign client interfaces, can be involuntarily exposing endpoints corresponding to `@RequestMapping`-annotated interface methods. |
| CVE-2021-21986 | The vSphere Client (HTML5) contains a vulnerability in a vSphere authentication mechanism for the Virtual SAN Health Check, Site Recovery, vSphere Lifecycle Manager, and VMware Cloud Director Availability plug-ins. A malicious actor with network access to port 443 on vCenter Server may perform actions allowed by the impacted plug-ins without authentication. |
| CVE-2021-21984 | VMware vRealize Business for Cloud 7.x prior to 7.6.0 contains a remote code execution vulnerability due to an unauthorised end point. A malicious actor with network access may exploit this issue causing unauthorised remote code execution on vRealize Business for Cloud Virtual Appliance. |
| CVE-2021-21982 | VMware Carbon Black Cloud Workload appliance 1.0.0 and 1.01 has an authentication bypass vulnerability that may allow a malicious actor with network access to the administrative interface of the VMware Carbon Black Cloud Workload appliance to obtain a valid authentication token. Successful exploitation of this issue would result in the attacker being able to view and alter administrative configuration settings. |
| CVE-2021-21973 | The vSphere Client (HTML5) contains an SSRF (Server Side Request Forgery) vulnerability due to improper validation of URLs in a vCenter Server plugin. A malicious actor with network access to port 443 may exploit this issue by sending a POST request to vCenter Server plugin leading to information disclosure. This affects: VMware vCenter Server (7.x before 7.0 U1c, 6.7 before 6.7 U3l and 6.5 before 6.5 U3n) and VMware Cloud Foundation (4.x before 4.2 and 3.x before 3.10.1.2). |
| CVE-2021-21972 | The vSphere Client (HTML5) contains a remote code execution vulnerability in a vCenter Server plugin. A malicious actor with network access to port 443 may exploit this issue to execute commands with unrestricted privileges on the underlying operating system that hosts vCenter Server. This affects VMware vCenter Server (7.x before 7.0 U1c, 6.7 before 6.7 U3l and 6.5 before 6.5 U3n) and VMware Cloud Foundation (4.x before 4.2 and 3.x before 3.10.1.2). |
| CVE-2021-21736 | A smart camera product of ZTE is impacted by a permission and access control vulnerability. Due to the defect of user permission management by the cloud-end app, users whose sharing permissions have been revoked can still control the camera, such as restarting the camera, restoring factory settings, etc.. This affects ZXHN HS562 V1.0.0.0B2.0000, V1.0.0.0B3.0000E |
| CVE-2021-21631 | Jenkins Cloud Statistics Plugin 0.26 and earlier does not perform a permission check in an HTTP endpoint, allowing attackers with Overall/Read permission and knowledge of random activity IDs to view related provisioning exception error messages. |
| CVE-2021-21477 | SAP Commerce Cloud, versions - 1808,1811,1905,2005,2011, enables certain users with required privileges to edit drools rules, an authenticated attacker with this privilege will be able to inject malicious code in the drools rules which when executed leads to Remote Code Execution vulnerability enabling the attacker to compromise the underlying host enabling him to impair confidentiality, integrity and availability of the application. |
| CVE-2021-21445 | SAP Commerce Cloud, versions - 1808, 1811, 1905, 2005, 2011, allows an authenticated attacker to include invalidated data in the HTTP response Content Type header, due to improper input validation, and sent to a Web user. A successful exploitation of this vulnerability may lead to advanced attacks, including cross-site scripting and page hijacking. |
| CVE-2021-21390 | MinIO is an open-source high performance object storage service and it is API compatible with Amazon S3 cloud storage service. In MinIO before version RELEASE.2021-03-17T02-33-02Z, there is a vulnerability which enables MITM modification of request bodies that are meant to have integrity guaranteed by chunk signatures. In a PUT request using aws-chunked encoding, MinIO ordinarily verifies signatures at the end of a chunk. This check can be skipped if the client sends a false chunk size that is much greater than the actual data sent: the server accepts and completes the request without ever reaching the end of the chunk + thereby without ever checking the chunk signature. This is fixed in version RELEASE.2021-03-17T02-33-02Z. As a workaround one can avoid using "aws-chunked" encoding-based chunk signature upload requests instead use TLS. MinIO SDKs automatically disable chunked encoding signature when the server endpoint is configured with TLS. |
| CVE-2021-2138 | Vulnerability in the Oracle Cloud Infrastructure Data Science Notebook Sessions. Easily exploitable vulnerability allows low privileged attacker with access to the physical communication segment attached to the hardware where the Oracle Cloud Infrastructure Data Science Notebook Sessions executes to compromise Oracle Cloud Infrastructure Data Science Notebook Sessions. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Cloud Infrastructure Data Science Notebook Sessions accessible data as well as unauthorized read access to a subset of Oracle Cloud Infrastructure Data Science Notebook Sessions accessible data. All affected customers were notified of CVE-2021-2138 by Oracle. CVSS 3.1 Base Score 4.6 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:N) |
| CVE-2021-21378 | Envoy is a cloud-native high-performance edge/middle/service proxy. In Envoy version 1.17.0 an attacker can bypass authentication by presenting a JWT token with an issuer that is not in the provider list when Envoy's JWT Authentication filter is configured with the `allow_missing` requirement under `requires_any` due to a mistake in implementation. Envoy's JWT Authentication filter can be configured with the `allow_missing` requirement that will be satisfied if JWT is missing (JwtMissed error) and fail if JWT is presented or invalid. Due to a mistake in implementation, a JwtUnknownIssuer error was mistakenly converted to JwtMissed when `requires_any` was configured. So if `allow_missing` was configured under `requires_any`, an attacker can bypass authentication by presenting a JWT token with an issuer that is not in the provider list. Integrity may be impacted depending on configuration if the JWT token is used to protect against writes or modifications. This regression was introduced on 2020/11/12 in PR 13839 which fixed handling `allow_missing` under RequiresAny in a JwtRequirement (see issue 13458). The AnyVerifier aggregates the children verifiers' results into a final status where JwtMissing is the default error. However, a JwtUnknownIssuer was mistakenly treated the same as a JwtMissing error and the resulting final aggregation was the default JwtMissing. As a result, `allow_missing` would allow a JWT token with an unknown issuer status. This is fixed in version 1.17.1 by PR 15194. The fix works by preferring JwtUnknownIssuer over a JwtMissing error, fixing the accidental conversion and bypass with `allow_missing`. A user could detect whether a bypass occurred if they have Envoy logs enabled with debug verbosity. Users can enable component level debug logs for JWT. The JWT filter logs will indicate that there is a request with a JWT token and a failure that the JWT token is missing. |
| CVE-2021-21371 | Tenable for Jira Cloud is an open source project designed to pull Tenable.io vulnerability data, then generate Jira Tasks and sub-tasks based on the vulnerabilities' current state. It published in pypi as "tenable-jira-cloud". In tenable-jira-cloud before version 1.1.21, it is possible to run arbitrary commands through the yaml.load() method. This could allow an attacker with local access to the host to run arbitrary code by running the application with a specially crafted YAML configuration file. This is fixed in version 1.1.21 by using yaml.safe_load() instead of yaml.load(). |
| CVE-2021-21362 | MinIO is an open-source high performance object storage service and it is API compatible with Amazon S3 cloud storage service. In MinIO before version RELEASE.2021-03-04T00-53-13Z it is possible to bypass a readOnly policy by creating a temporary 'mc share upload' URL. Everyone is impacted who uses MinIO multi-users. This is fixed in version RELEASE.2021-03-04T00-53-13Z. As a workaround, one can disable uploads with `Content-Type: multipart/form-data` as mentioned in the S3 API RESTObjectPOST docs by using a proxy in front of MinIO. |
| CVE-2021-21084 | AEM's Cloud Service offering, as well as versions 6.5.7.0 (and below), 6.4.8.3 (and below) and 6.3.3.8 (and below) are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by an attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field. |
| CVE-2021-21083 | AEM's Cloud Service offering, as well as versions 6.5.7.0 (and below), 6.4.8.3 (and below) and 6.3.3.8 (and below) are affected by an Improper Access Control vulnerability. An unauthenticated attacker could leverage this vulnerability to cause an application denial-of-service in the context of the current user. |
| CVE-2021-21078 | Adobe Creative Cloud Desktop Application version 5.3 (and earlier) is affected by an Unquoted Service Path vulnerability in CCXProcess that could allow an attacker to achieve arbitrary code execution in the process of the current user. Exploitation of this issue requires user interaction |
| CVE-2021-21069 | Adobe Creative Cloud Desktop Application version 5.3 (and earlier) is affected by a local privilege escalation vulnerability that could allow an attacker to call functions against the installer to perform high privileged actions. Exploitation of this issue does not require user interaction. |
| CVE-2021-21068 | Adobe Creative Cloud Desktop Application version 5.3 (and earlier) is affected by a file handling vulnerability that could allow an attacker to cause arbitrary file overwriting. Exploitation of this issue requires physical access and user interaction. |
| CVE-2021-20989 | Fibaro Home Center 2 and Lite devices with firmware version 4.600 and older initiate SSH connections to the Fibaro cloud to provide remote access and remote support capabilities. This connection can be intercepted using DNS spoofing attack and a device initiated remote port-forward channel can be used to connect to the web management interface. Knowledge of authorization credentials to the management interface is required to perform any further actions. |
| CVE-2021-20578 | IBM Cloud Pak for Security (CP4S) 1.7.0.0, 1.7.1.0, 1.7.2.0, and 1.8.0.0 could allow an attacker to perform unauthorized actions due to improper or missing authentication controls. IBM X-Force ID: 199282. |
| CVE-2021-20577 | IBM Cloud Pak for Security (CP4S) 1.5.0.0 and 1.5.0.1 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 199281. |
| CVE-2021-20565 | IBM Cloud Pak for Security (CP4S) 1.4.0.0, 1.5.0.0, 1.5.0.1, 1.6.0.0, and 1.6.0.1 uses a protection mechanism that relies on the existence or values of an input, but the input can be modified by an untrusted actor in a way that bypasses the protection mechanism. IBM X-Force ID: 199236. |
| CVE-2021-20564 | IBM Cloud Pak for Security (CP4S) 1.4.0.0, 1.5.0.0, 1.5.0.1, 1.6.0.0, and 1.6.0.1 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 199235. |
| CVE-2021-20541 | IBM Cloud Pak for Security (CP4S) 1.5.0.0, 1.5.1.0, 1.6.0.0, 1.6.1.0, 1.7.0.0, and 1.7.1.0 could disclose sensitive information to an unauthorized user through HTTP GET requests. This information could be used in further attacks against the system. IBM X-Force ID: 198927. |
| CVE-2021-20540 | IBM Cloud Pak for Security (CP4S) 1.5.0.0, 1.5.1.0, 1.6.0.0, 1.6.1.0, 1.7.0.0, and 1.7.1.0 could disclose sensitive information to an unauthorized user through HTTP GET requests. This information could be used in further attacks against the system. IBM X-Force ID: 198923. |
| CVE-2021-20539 | IBM Cloud Pak for Security (CP4S) 1.5.0.0, 1.5.1.0, 1.6.0.0, 1.6.1.0, 1.7.0.0, and 1.7.1.0 could disclose sensitive information to an unauthorized user through HTTP GET requests. This information could be used in further attacks against the system. IBM X-Force ID: 198920. |
| CVE-2021-20538 | IBM Cloud Pak for Security (CP4S) 1.5.0.0 and 1.5.0.1 could allow a user to obtain sensitive information or perform actions they should not have access to due to incorrect authorization mechanisms. IBM X-Force ID: 198919. |
| CVE-2021-20486 | IBM Cloud Pak for Data 3.0 could allow an authenticated user to obtain sensitive information when installed with additional plugins. IBM X-Force ID: 197668. |
| CVE-2021-20482 | IBM Cloud Pak for Automation 20.0.2 and 20.0.3 IF002 are vulnerable to an XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 197504. |
| CVE-2021-20479 | IBM Cloud Pak System 2.3.0 through 2.3.3.3 Interim Fix 1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 197498. |
| CVE-2021-20478 | IBM Cloud Pak System 2.3 could allow a local user in some situations to view the artifacts of another user in self service console. IBM X-Force ID: 197497. |
| CVE-2021-20424 | IBM Cloud Pak for Applications 4.3 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. X-Force ID: 196309. |
| CVE-2021-20423 | IBM Cloud Pak for Applications 4.3 could allow an authenticated user gain escalated privilesges due to improper application permissions. IBM X-Force ID: 196308. |
| CVE-2021-20422 | IBM Cloud Pak for Applications 4.3 could disclose sensitive information to a malicious attacker by accessing data stored in memory. IBM X-Force ID: 196304. |
| CVE-2021-20369 | IBM Cloud Pak for Applications 4.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 195361. |
| CVE-2021-20368 | IBM Cloud Pak for Applications 4.3 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 195357. |
| CVE-2021-20366 | IBM Cloud Pak for Applications 4.3 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 195037. |
| CVE-2021-20365 | IBM Cloud Pak for Applications 4.3 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 195036. |
| CVE-2021-20364 | IBM Cloud Pak for Applications 4.3 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 195035. |
| CVE-2021-20363 | IBM Cloud Pak for Applications 4.3 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 195034. |
| CVE-2021-20362 | IBM Cloud Pak for Applications 4.3 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 195033. |
| CVE-2021-20361 | IBM Cloud Pak for Applications 4.3 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 195032. |
| CVE-2021-20360 | IBM Cloud Pak for Applications 4.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 195031. |
| CVE-2021-20359 | IBM Cloud Pak for Automation 20.0.3, 20.0.2-IF002 - Business Automation Application Designer Component stores potentially sensitive information in log files that could be obtained by an unauthorized user. IBM X-Force ID: 194966. |
| CVE-2021-20358 | IBM Cloud Pak for Automation 20.0.3, 20.0.2-IF002 stores potentially sensitive information in clear text in API connection log files. This information could be obtained by a user with permissions to read log files. IBM X-Force ID: 194965. |
| CVE-2021-20341 | IBM Cloud Pak for Multicloud Management Monitoring 2.2 returns potentially sensitive information in headers which could lead to further attacks against the system. IBM X-Force ID: 194513. |
| CVE-2021-20238 | It was found in OpenShift Container Platform 4 that ignition config, served by the Machine Config Server, can be accessed externally from clusters without authentication. The MCS endpoint (port 22623) provides ignition configuration used for bootstrapping Nodes and can include some sensitive data, e.g. registry pull secrets. There are two scenarios where this data can be accessed. The first is on Baremetal, OpenStack, Ovirt, Vsphere and KubeVirt deployments which do not have a separate internal API endpoint and allow access from outside the cluster to port 22623 from the standard OpenShift API Virtual IP address. The second is on cloud deployments when using unsupported network plugins, which do not create iptables rules that prevent to port 22623. In this scenario, the ignition config is exposed to all pods within the cluster and cannot be accessed externally. |
| CVE-2021-1630 | XML external entity (XXE) vulnerability affecting certain versions of a Mule runtime component that may affect CloudHub, GovCloud, Runtime Fabric, Pivotal Cloud Foundry, Private Cloud Edition, and on-premise customers. |
| CVE-2021-1582 | A vulnerability in the web UI of Cisco Application Policy Infrastructure Controller (APIC) or Cisco Cloud APIC could allow an authenticated, remote attacker to perform a stored cross-site scripting attack on an affected system. This vulnerability is due to improper input validation in the web UI. An authenticated attacker could exploit this vulnerability by sending malicious input to the web UI. A successful exploit could allow the attacker to execute arbitrary script code in the context of the web-based interface or access sensitive, browser-based information. |
| CVE-2021-1581 | Multiple vulnerabilities in the web UI and API endpoints of Cisco Application Policy Infrastructure Controller (APIC) or Cisco Cloud APIC could allow a remote attacker to perform a command injection or file upload attack on an affected system. For more information about these vulnerabilities, see the Details section of this advisory. |
| CVE-2021-1580 | Multiple vulnerabilities in the web UI and API endpoints of Cisco Application Policy Infrastructure Controller (APIC) or Cisco Cloud APIC could allow a remote attacker to perform a command injection or file upload attack on an affected system. For more information about these vulnerabilities, see the Details section of this advisory. |
| CVE-2021-1579 | A vulnerability in an API endpoint of Cisco Application Policy Infrastructure Controller (APIC) and Cisco Cloud Application Policy Infrastructure Controller (Cloud APIC) could allow an authenticated, remote attacker with Administrator read-only credentials to elevate privileges on an affected system. This vulnerability is due to an insufficient role-based access control (RBAC). An attacker with Administrator read-only credentials could exploit this vulnerability by sending a specific API request using an app with admin write credentials. A successful exploit could allow the attacker to elevate privileges to Administrator with write privileges on the affected device. |
| CVE-2021-1578 | A vulnerability in an API endpoint of Cisco Application Policy Infrastructure Controller (APIC) and Cisco Cloud Application Policy Infrastructure Controller (Cloud APIC) could allow an authenticated, remote attacker to elevate privileges to Administrator on an affected device. This vulnerability is due to an improper policy default setting. An attacker could exploit this vulnerability by using a non-privileged credential for Cisco ACI Multi-Site Orchestrator (MSO) to send a specific API request to a managed Cisco APIC or Cloud APIC device. A successful exploit could allow the attacker to obtain Administrator credentials on the affected device. |
| CVE-2021-1577 | A vulnerability in an API endpoint of Cisco Application Policy Infrastructure Controller (APIC) and Cisco Cloud Application Policy Infrastructure Controller (Cloud APIC) could allow an unauthenticated, remote attacker to read or write arbitrary files on an affected system. This vulnerability is due to improper access control. An attacker could exploit this vulnerability by using a specific API endpoint to upload a file to an affected device. A successful exploit could allow the attacker to read or write arbitrary files on an affected device. |
| CVE-2021-0279 | Juniper Networks Contrail Cloud (CC) releases prior to 13.6.0 have RabbitMQ service enabled by default with hardcoded credentials. The messaging services of RabbitMQ are used when coordinating operations and status information among Contrail services. An attacker with access to an administrative service for RabbitMQ (e.g. GUI), can use these hardcoded credentials to cause a Denial of Service (DoS) or have access to unspecified sensitive system information. This issue affects the Juniper Networks Contrail Cloud releases on versions prior to 13.6.0. |
| CVE-2020-9752 | Naver Cloud Explorer before 2.2.2.11 allows the attacker can move a local file in any path on the filesystem as a system privilege through its named pipe. |
| CVE-2020-9751 | Naver Cloud Explorer before 2.2.2.11 allows the system to download an arbitrary file from the attacker's server and execute it during the upgrade. |
| CVE-2020-9682 | Adobe Creative Cloud Desktop Application versions 5.1 and earlier have a symlink vulnerability vulnerability. Successful exploitation could lead to arbitrary file system write. |
| CVE-2020-9671 | Adobe Creative Cloud Desktop Application versions 5.1 and earlier have an insecure file permissions vulnerability. Successful exploitation could lead to privilege escalation. |
| CVE-2020-9670 | Adobe Creative Cloud Desktop Application versions 5.1 and earlier have a symlink vulnerability vulnerability. Successful exploitation could lead to privilege escalation. |
| CVE-2020-9669 | Adobe Creative Cloud Desktop Application versions 5.1 and earlier have a lack of exploit mitigations vulnerability. Successful exploitation could lead to privilege escalation. |
| CVE-2020-9501 | Attackers can obtain Cloud Key information from the Dahua Web P2P control in specific ways. Cloud Key is used to authenticate the connection between the client tool and the platform. An attacker may use the leaked Cloud Key to impersonate the client to connect to the platform, resulting in additional consumption of platform server resources. Versions with Build time before April 2020 are affected. |
| CVE-2020-9471 | Umbraco Cloud 8.5.3 allows an authenticated file upload (and consequently Remote Code Execution) via the Install Packages functionality. |
| CVE-2020-9436 | PHOENIX CONTACT TC ROUTER 3002T-4G through 2.05.3, TC ROUTER 2002T-3G through 2.05.3, TC ROUTER 3002T-4G VZW through 2.05.3, TC ROUTER 3002T-4G ATT through 2.05.3, TC CLOUD CLIENT 1002-4G through 2.03.17, and TC CLOUD CLIENT 1002-TXTX through 1.03.17 devices allow authenticated users to inject system commands through a modified POST request to a specific URL. |
| CVE-2020-9435 | PHOENIX CONTACT TC ROUTER 3002T-4G through 2.05.3, TC ROUTER 2002T-3G through 2.05.3, TC ROUTER 3002T-4G VZW through 2.05.3, TC ROUTER 3002T-4G ATT through 2.05.3, TC CLOUD CLIENT 1002-4G through 2.03.17, and TC CLOUD CLIENT 1002-TXTX through 1.03.17 devices contain a hardcoded certificate (and key) that is used by default for web-based services on the device. Impersonation, man-in-the-middle, or passive decryption attacks are possible if the generic certificate is not replaced by a device-specific certificate during installation. |
| CVE-2020-9363 | The Sophos AV parsing engine before 2020-01-14 allows virus-detection bypass via a crafted ZIP archive. This affects Endpoint Protection, Cloud Optix, Mobile, Intercept X Endpoint, Intercept X for Server, and Secure Web Gateway. NOTE: the vendor feels that this does not apply to endpoint-protection products because the virus would be detected upon extraction. |
| CVE-2020-9349 | The CACAGOO Cloud Storage Intelligent Camera TV-288ZD-2MP with firmware 3.4.2.0919 allows access to the RTSP service without a password. |
| CVE-2020-9342 | The F-Secure AV parsing engine before 2020-02-05 allows virus-detection bypass via crafted Compression Method data in a GZIP archive. This affects versions before 17.0.605.474 (on Linux) of Cloud Protection For Salesforce, Email and Server Security, and Internet GateKeeper. |
| CVE-2020-8996 | AnyShare Cloud 6.0.9 allows authenticated directory traversal to read files, as demonstrated by the interface/downloadwithpath/downloadfile/?filepath=/etc/passwd URI. |
| CVE-2020-8990 | Western Digital My Cloud Home before 3.6.0 and ibi before 3.6.0 allow Session Fixation. |
| CVE-2020-8983 | An arbitrary file write issue exists in all versions of Citrix ShareFile StorageZones (aka storage zones) Controller, including the most recent 5.10.x releases as of May 2020, which allows remote code execution. RCE and file access is granted to everything hosted by ShareFile, be it on-premise or inside Citrix Cloud itself (both are internet facing). NOTE: unlike most CVEs, exploitability depends on the product version that was in use when a particular setup step was performed, NOT the product version that is in use during a current assessment of a CVE consumer's product inventory. Specifically, the vulnerability can be exploited if a storage zone was created by one of these product versions: 5.9.0, 5.8.0, 5.7.0, 5.6.0, 5.5.0, or earlier. This CVE differs from CVE-2020-7473 and CVE-2020-8982. |
| CVE-2020-8982 | An unauthenticated arbitrary file read issue exists in all versions of Citrix ShareFile StorageZones (aka storage zones) Controller, including the most recent 5.10.x releases as of May 2020. RCE and file access is granted to everything hosted by ShareFile, be it on-premise or inside Citrix Cloud itself (both are internet facing). NOTE: unlike most CVEs, exploitability depends on the product version that was in use when a particular setup step was performed, NOT the product version that is in use during a current assessment of a CVE consumer's product inventory. Specifically, the vulnerability can be exploited if a storage zone was created by one of these product versions: 5.9.0, 5.8.0, 5.7.0, 5.6.0, 5.5.0, or earlier. This CVE differs from CVE-2020-7473 and CVE-2020-8983. |
| CVE-2020-8933 | A vulnerability in Google Cloud Platform's guest-oslogin versions between 20190304 and 20200507 allows a user that is only granted the role "roles/compute.osLogin" to escalate privileges to root. Using the membership to the "lxd" group, an attacker can attach host devices and filesystems. Within an lxc container, it is possible to attach the host OS filesystem and modify /etc/sudoers to then gain administrative privileges. All images created after 2020-May-07 (20200507) are fixed, and if you cannot update, we recommend you edit /etc/group/security.conf and remove the "lxd" user from the OS Login entry. |
| CVE-2020-8907 | A vulnerability in Google Cloud Platform's guest-oslogin versions between 20190304 and 20200507 allows a user that is only granted the role "roles/compute.osLogin" to escalate privileges to root. Using their membership to the "docker" group, an attacker with this role is able to run docker and mount the host OS. Within docker, it is possible to modify the host OS filesystem and modify /etc/groups to gain administrative privileges. All images created after 2020-May-07 (20200507) are fixed, and if you cannot update, we recommend you edit /etc/group/security.conf and remove the "docker" user from the OS Login entry. |
| CVE-2020-8903 | A vulnerability in Google Cloud Platform's guest-oslogin versions between 20190304 and 20200507 allows a user that is only granted the role "roles/compute.osLogin" to escalate privileges to root. Using their membership to the "adm" group, users with this role are able to read the DHCP XID from the systemd journal. Using the DHCP XID, it is then possible to set the IP address and hostname of the instance to any value, which is then stored in /etc/hosts. An attacker can then point metadata.google.internal to an arbitrary IP address and impersonate the GCE metadata server which make it is possible to instruct the OS Login PAM module to grant administrative privileges. All images created after 2020-May-07 (20200507) are fixed, and if you cannot update, we recommend you edit /etc/group/security.conf and remove the "adm" user from the OS Login entry. |
| CVE-2020-8632 | In cloud-init through 19.4, rand_user_password in cloudinit/config/cc_set_passwords.py has a small default pwlen value, which makes it easier for attackers to guess passwords. |
| CVE-2020-8631 | cloud-init through 19.4 relies on Mersenne Twister for a random password, which makes it easier for attackers to predict passwords, because rand_str in cloudinit/util.py calls the random.choice function. |
| CVE-2020-8563 | In Kubernetes clusters using VSphere as a cloud provider, with a logging level set to 4 or above, VSphere cloud credentials will be leaked in the cloud controller manager's log. This affects < v1.19.3. |
| CVE-2020-8349 | An internal security review has identified an unauthenticated remote code execution vulnerability in Cloud Networking Operating System (CNOS)’ optional REST API management interface. This interface is disabled by default and not vulnerable unless enabled. When enabled, it is only vulnerable where attached to a VRF and as allowed by defined ACLs. Lenovo strongly recommends upgrading to a non-vulnerable CNOS release. Where not possible, Lenovo recommends disabling the REST API management interface or restricting access to the management VRF and further limiting access to authorized management stations via ACL. |
| CVE-2020-8267 | A security issue was found in UniFi Protect controller v1.14.10 and earlier.The authentication in the UniFi Protect controller API was using “x-token” improperly, allowing attackers to use the API to send authenticated messages without a valid token.This vulnerability was fixed in UniFi Protect v1.14.11 and newer.This issue does not impact UniFi Cloud Key Gen 2 plus.This issue does not impact UDM-Pro customers with UniFi Protect stopped.Affected Products:UDM-Pro firmware 1.7.2 and earlier.UNVR firmware 1.3.12 and earlier.Mitigation:Update UniFi Protect to v1.14.11 or newer version; the UniFi Protect controller can be updated through your UniFi OS settings.Alternatively, you can update UNVR and UDM-Pro to:- UNVR firmware to 1.3.15 or newer.- UDM-Pro firmware to 1.8.0 or newer. |
| CVE-2020-8188 | We have recently released new version of UniFi Protect firmware v1.13.3 and v1.14.10 for Unifi Cloud Key Gen2 Plus and UniFi Dream Machine Pro/UNVR respectively that fixes vulnerabilities found on Protect firmware v1.13.2, v1.14.9 and prior according to the description below:View only users can run certain custom commands which allows them to assign themselves unauthorized roles and escalate their privileges. |
| CVE-2020-8157 | UniFi Cloud Key firmware <= v1.1.10 for Cloud Key gen2 and Cloud Key gen2 Plus contains a vulnerability that allows unrestricted root access through the serial interface (UART). |
| CVE-2020-8148 | UniFi Cloud Key firmware < 1.1.6 contains a vulnerability that enables an attacker being able to change a device hostname by sending a malicious API request. This affects Cloud Key gen2 and Cloud Key gen2 Plus. |
| CVE-2020-8092 | A privilege escalation vulnerability in BDLDaemon as used in Bitdefender Antivirus for Mac allows a local attacker to obtain authentication tokens for requests submitted to the Bitdefender Cloud. This issue affects: Bitdefender Bitdefender Antivirus for Mac versions prior to 8.0.0. |
| CVE-2020-8023 | A acceptance of Extraneous Untrusted Data With Trusted Data vulnerability in the start script of openldap2 of SUSE Enterprise Storage 5, SUSE Linux Enterprise Debuginfo 11-SP3, SUSE Linux Enterprise Debuginfo 11-SP4, SUSE Linux Enterprise Point of Sale 11-SP3, SUSE Linux Enterprise Server 11-SECURITY, SUSE Linux Enterprise Server 11-SP4-LTSS, SUSE Linux Enterprise Server 12-SP2-BCL, SUSE Linux Enterprise Server 12-SP2-LTSS, SUSE Linux Enterprise Server 12-SP3-BCL, SUSE Linux Enterprise Server 12-SP3-LTSS, SUSE Linux Enterprise Server 12-SP4, SUSE Linux Enterprise Server 12-SP5, SUSE Linux Enterprise Server 15-LTSS, SUSE Linux Enterprise Server for SAP 12-SP2, SUSE Linux Enterprise Server for SAP 12-SP3, SUSE Linux Enterprise Server for SAP 15, SUSE OpenStack Cloud 7, SUSE OpenStack Cloud 8, SUSE OpenStack Cloud Crowbar 8; openSUSE Leap 15.1, openSUSE Leap 15.2 allows local attackers to escalate privileges from user ldap to root. This issue affects: SUSE Enterprise Storage 5 openldap2 versions prior to 2.4.41-18.71.2. SUSE Linux Enterprise Debuginfo 11-SP3 openldap2 versions prior to 2.4.26-0.74.13.1,. SUSE Linux Enterprise Debuginfo 11-SP4 openldap2 versions prior to 2.4.26-0.74.13.1,. SUSE Linux Enterprise Point of Sale 11-SP3 openldap2 versions prior to 2.4.26-0.74.13.1,. SUSE Linux Enterprise Server 11-SECURITY openldap2-client-openssl1 versions prior to 2.4.26-0.74.13.1. SUSE Linux Enterprise Server 11-SP4-LTSS openldap2 versions prior to 2.4.26-0.74.13.1,. SUSE Linux Enterprise Server 12-SP2-BCL openldap2 versions prior to 2.4.41-18.71.2. SUSE Linux Enterprise Server 12-SP2-LTSS openldap2 versions prior to 2.4.41-18.71.2. SUSE Linux Enterprise Server 12-SP3-BCL openldap2 versions prior to 2.4.41-18.71.2. SUSE Linux Enterprise Server 12-SP3-LTSS openldap2 versions prior to 2.4.41-18.71.2. SUSE Linux Enterprise Server 12-SP4 openldap2 versions prior to 2.4.41-18.71.2. SUSE Linux Enterprise Server 12-SP5 openldap2 versions prior to 2.4.41-18.71.2. SUSE Linux Enterprise Server 15-LTSS openldap2 versions prior to 2.4.46-9.31.1. SUSE Linux Enterprise Server for SAP 12-SP2 openldap2 versions prior to 2.4.41-18.71.2. SUSE Linux Enterprise Server for SAP 12-SP3 openldap2 versions prior to 2.4.41-18.71.2. SUSE Linux Enterprise Server for SAP 15 openldap2 versions prior to 2.4.46-9.31.1. SUSE OpenStack Cloud 7 openldap2 versions prior to 2.4.41-18.71.2. SUSE OpenStack Cloud 8 openldap2 versions prior to 2.4.41-18.71.2. SUSE OpenStack Cloud Crowbar 8 openldap2 versions prior to 2.4.41-18.71.2. openSUSE Leap 15.1 openldap2 versions prior to 2.4.46-lp151.10.12.1. openSUSE Leap 15.2 openldap2 versions prior to 2.4.46-lp152.14.3.1. |
| CVE-2020-8022 | A Incorrect Default Permissions vulnerability in the packaging of tomcat on SUSE Enterprise Storage 5, SUSE Linux Enterprise Server 12-SP2-BCL, SUSE Linux Enterprise Server 12-SP2-LTSS, SUSE Linux Enterprise Server 12-SP3-BCL, SUSE Linux Enterprise Server 12-SP3-LTSS, SUSE Linux Enterprise Server 12-SP4, SUSE Linux Enterprise Server 12-SP5, SUSE Linux Enterprise Server 15-LTSS, SUSE Linux Enterprise Server for SAP 12-SP2, SUSE Linux Enterprise Server for SAP 12-SP3, SUSE Linux Enterprise Server for SAP 15, SUSE OpenStack Cloud 7, SUSE OpenStack Cloud 8, SUSE OpenStack Cloud Crowbar 8 allows local attackers to escalate from group tomcat to root. This issue affects: SUSE Enterprise Storage 5 tomcat versions prior to 8.0.53-29.32.1. SUSE Linux Enterprise Server 12-SP2-BCL tomcat versions prior to 8.0.53-29.32.1. SUSE Linux Enterprise Server 12-SP2-LTSS tomcat versions prior to 8.0.53-29.32.1. SUSE Linux Enterprise Server 12-SP3-BCL tomcat versions prior to 8.0.53-29.32.1. SUSE Linux Enterprise Server 12-SP3-LTSS tomcat versions prior to 8.0.53-29.32.1. SUSE Linux Enterprise Server 12-SP4 tomcat versions prior to 9.0.35-3.39.1. SUSE Linux Enterprise Server 12-SP5 tomcat versions prior to 9.0.35-3.39.1. SUSE Linux Enterprise Server 15-LTSS tomcat versions prior to 9.0.35-3.57.3. SUSE Linux Enterprise Server for SAP 12-SP2 tomcat versions prior to 8.0.53-29.32.1. SUSE Linux Enterprise Server for SAP 12-SP3 tomcat versions prior to 8.0.53-29.32.1. SUSE Linux Enterprise Server for SAP 15 tomcat versions prior to 9.0.35-3.57.3. SUSE OpenStack Cloud 7 tomcat versions prior to 8.0.53-29.32.1. SUSE OpenStack Cloud 8 tomcat versions prior to 8.0.53-29.32.1. SUSE OpenStack Cloud Crowbar 8 tomcat versions prior to 8.0.53-29.32.1. |
| CVE-2020-7010 | Elastic Cloud on Kubernetes (ECK) versions prior to 1.1.0 generate passwords using a weak random number generator. If an attacker is able to determine when the current Elastic Stack cluster was deployed they may be able to more easily brute force the Elasticsearch credentials generated by ECK. |
| CVE-2020-6852 | CACAGOO Cloud Storage Intelligent Camera TV-288ZD-2MP with firmware 3.4.2.0919 has weak authentication of TELNET access, leading to root privileges without any password required. |
| CVE-2020-6363 | SAP Commerce Cloud, versions - 1808, 1811, 1905, 2005, exposes several web applications that maintain sessions with a user. These sessions are established after the user has authenticated with username/passphrase credentials. The user can change their own passphrase, but this does not invalidate active sessions that the user may have with SAP Commerce Cloud web applications, which gives an attacker the opportunity to reuse old session credentials, resulting in Insufficient Session Expiration. |
| CVE-2020-6272 | SAP Commerce Cloud versions - 1808, 1811, 1905, 2005, does not sufficiently encode user inputs, which allows an authenticated and authorized content manager to inject malicious script into several web CMS components. These can be saved and later triggered, if an affected web page is visited, resulting in Cross-Site Scripting (XSS) vulnerability. |
| CVE-2020-6206 | SAP Cloud Platform Integration for Data Services, version 1.0, allows user inputs to be reflected as error or warning massages. This could mislead the victim to follow malicious instructions inserted by external attackers, leading to Cross Site Request Forgery. |
| CVE-2020-5862 | On BIG-IP 15.1.0-15.1.0.1, 15.0.0-15.0.1.1, and 14.1.0-14.1.2.2, under certain conditions, TMM may crash or stop processing new traffic with the DPDK/ENA driver on AWS systems while sending traffic. This issue does not affect any other platforms, hardware or virtual, or any other cloud provider since the affected driver is specific to AWS. |
| CVE-2020-5846 | An insecure file upload and code execution issue was discovered in Ahsay Cloud Backup Suite 8.3.0.30 via a "PUT /obs/obm7/file/upload" request with the base64-encoded pathname in the X-RSW-custom-encode-path HTTP header, and the content in the HTTP request body. It is possible to upload a file into any directory of the server. One can insert a JSP shell into the web server's directory and execute it. This leads to full system access as the configured user (e.g., Administrator) when starting from any authenticated session (e.g., a trial account). This is fixed in the 83/830122/cbs-*-hotfix-task26000 builds. |
| CVE-2020-5798 | inSync Client installer for macOS versions v6.8.0 and prior could allow an attacker to gain privileges of a root user from a lower privileged user due to improper integrity checks and directory permissions. |
| CVE-2020-5428 | In applications using Spring Cloud Task 2.2.4.RELEASE and below, may be vulnerable to SQL injection when exercising certain lookup queries in the TaskExplorer. |
| CVE-2020-5427 | In Spring Cloud Data Flow, versions 2.6.x prior to 2.6.5, versions 2.5.x prior 2.5.4, an application is vulnerable to SQL injection when requesting task execution. |
| CVE-2020-5426 | Scheduler for TAS prior to version 1.4.0 was permitting plaintext transmission of UAA client token by sending it over a non-TLS connection. This also depended on the configuration of the MySQL server which is used to cache a UAA client token used by the service. If intercepted the token can give an attacker admin level access in the cloud controller. |
| CVE-2020-5423 | CAPI (Cloud Controller) versions prior to 1.101.0 are vulnerable to a denial-of-service attack in which an unauthenticated malicious attacker can send specially-crafted YAML files to certain endpoints, causing the YAML parser to consume excessive CPU and RAM. |
| CVE-2020-5420 | Cloud Foundry Routing (Gorouter) versions prior to 0.206.0 allow a malicious developer with "cf push" access to cause denial-of-service to the CF cluster by pushing an app that returns specially crafted HTTP responses that crash the Gorouters. |
| CVE-2020-5418 | Cloud Foundry CAPI (Cloud Controller) versions prior to 1.98.0 allow authenticated users having only the "cloud_controller.read" scope, but no roles in any spaces, to list all droplets in all spaces (whereas they should see none). |
| CVE-2020-5417 | Cloud Foundry CAPI (Cloud Controller), versions prior to 1.97.0, when used in a deployment where an app domain is also the system domain (which is true in the default CF Deployment manifest), were vulnerable to developers maliciously or accidentally claiming certain sensitive routes, potentially resulting in the developer's app handling some requests that were expected to go to certain system components. |
| CVE-2020-5416 | Cloud Foundry Routing (Gorouter), versions prior to 0.204.0, when used in a deployment with NGINX reverse proxies in front of the Gorouters, is potentially vulnerable to denial-of-service attacks in which an unauthenticated malicious attacker can send specially-crafted HTTP requests that may cause the Gorouters to be dropped from the NGINX backend pool. |
| CVE-2020-5412 | Spring Cloud Netflix, versions 2.2.x prior to 2.2.4, versions 2.1.x prior to 2.1.6, and older unsupported versions allow applications to use the Hystrix Dashboard proxy.stream endpoint to make requests to any server reachable by the server hosting the dashboard. A malicious user, or attacker, can send a request to other servers that should not be exposed publicly. |
| CVE-2020-5410 | Spring Cloud Config, versions 2.2.x prior to 2.2.3, versions 2.1.x prior to 2.1.9, and older unsupported versions allow applications to serve arbitrary configuration files through the spring-cloud-config-server module. A malicious user, or attacker, can send a request using a specially crafted URL that can lead to a directory traversal attack. |
| CVE-2020-5405 | Spring Cloud Config, versions 2.2.x prior to 2.2.2, versions 2.1.x prior to 2.1.7, and older unsupported versions allow applications to serve arbitrary configuration files through the spring-cloud-config-server module. A malicious user, or attacker, can send a request using a specially crafted URL that can lead a directory traversal attack. |
| CVE-2020-5402 | In Cloud Foundry UAA, versions prior to 74.14.0, a CSRF vulnerability exists due to the OAuth2 state parameter not being checked in the callback function when authenticating with external identity providers. |
| CVE-2020-5401 | Cloud Foundry Routing Release, versions prior to 0.197.0, contains GoRouter, which allows malicious clients to send invalid headers, causing caching layers to reject subsequent legitimate clients trying to access the app. |
| CVE-2020-5400 | Cloud Foundry Cloud Controller (CAPI), versions prior to 1.91.0, logs properties of background jobs when they are run, which may include sensitive information such as credentials if provided to the job. A malicious user with access to those logs may gain unauthorized access to resources protected by such credentials. |
| CVE-2020-5399 | Cloud Foundry CredHub, versions prior to 2.5.10, connects to a MySQL database without TLS even when configured to use TLS. A malicious user with access to the network between CredHub and its MySQL database may eavesdrop on database connections and thereby gain unauthorized access to CredHub and other components. |
| CVE-2020-4967 | IBM Cloud Pak for Security (CP4S) 1.3.0.1 could disclose sensitive information through HTTP headers which could be used in further attacks against the system. IBM X-Force ID: 192425. |
| CVE-2020-4928 | IBM Cloud Pak System 2.3 could allow a local privileged attacker to upload arbitrary files. By intercepting the request and modifying the file extention, the attacker could execute arbitrary code on the server. IBM X-Force ID: 191705. |
| CVE-2020-4919 | IBM Cloud Pak System 2.3 has insufficient logout controls which could allow an authenticated privileged user to impersonate another user on the system. IBM X-Force ID: 191395. |
| CVE-2020-4918 | IBM Cloud Pak System 2.3 could allow l local privileged user to disclose sensitive information due to an insecure direct object reference in sell service console for the Platform System Manager. IBM X-Force ID: 191392. |
| CVE-2020-4917 | IBM Cloud Pak System 2.3 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. IBM X-Force ID: 191391. |
| CVE-2020-4916 | IBM Cloud Pak System 2.3 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 191390. |
| CVE-2020-4914 | IBM Cloud Pak System Suite 2.3.3.0 through 2.3.3.5 does not invalidate session after logout which could allow a local user to impersonate another user on the system. IBM X-Force ID: 191290. |
| CVE-2020-4913 | IBM Cloud Pak System 2.3 could reveal credential information in the HTTP response to a local privileged user. IBM X-Force ID: 191288. |
| CVE-2020-4912 | IBM Cloud Pak System 2.3 Self Service Console could allow a privilege escalation by capturing the user request URL when logged in as a privileged user. IBM X-Force ID: 191287. |
| CVE-2020-4910 | IBM Cloud Pak System 2.3 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 191274. |
| CVE-2020-4909 | IBM Cloud Pak System 2.3 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 191273. |
| CVE-2020-4850 | IBM Spectrum Scale 1.1.1.0 through 1.1.8.4 Transparent Cloud Tiering could allow a remote attacker to obtain sensitive information, caused by the leftover files after configuration. IBM X-Force ID: 190298. |
| CVE-2020-4820 | IBM Cloud Pak for Security (CP4S) 1.4.0.0 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| CVE-2020-4816 | IBM Cloud Pak for Security (CP4S) 1.4.0.0 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 189703. |
| CVE-2020-4815 | IBM Cloud Pak for Security (CP4S) 1.4.0.0 could allow a remote user to obtain sensitive information from HTTP response headers that could be used in further attacks against the system. |
| CVE-2020-4811 | IBM Cloud Pak for Security (CP4S) 1.4.0.0, 1.5.0.0, 1.5.0.1, 1.6.0.0, and 1.6.0.1 could allow a privileged user to inject inject malicious data using a specially crafted HTTP request due to improper input validation. |
| CVE-2020-4765 | IBM Cloud Pak for Multicloud Management prior to 2.3 allows web pages to be stored locally which can be read by another user on the system. IBM X-Force ID: 188902. |
| CVE-2020-4726 | The IBM Application Performance Monitoring UI (IBM Cloud APM 8.1.4) allows web pages to be stored locally which can be read by another user on the system. IBM X-Force ID: 187975. |
| CVE-2020-4725 | IBM Monitoring (IBM Cloud APM 8.1.4 ) could allow an authenticated user to modify HTML content by sending a specially crafted HTTP request to the APM UI, which could mislead another user. IBM X-Force ID: 187974. |
| CVE-2020-4719 | The IBM Cloud APM 8.1.4 server will issue a DNS request to resolve any hostname specified in the Cloud Event Management Webhook URL configuration definition. This could enable an authenticated user with admin authorization to create DNS query strings that are not hostnames. IBM X-Force ID: 187861. |
| CVE-2020-4696 | IBM Cloud Pak for Security 1.3.0.1(CP4S) does not invalidate session after logout which could allow an authenticated user to obtain sensitive information from the previous session. IBM X-Force ID: 186789. |
| CVE-2020-4628 | IBM Cloud Pak for Security (CP4S) 1.3.0.1 and 1.4.0.0 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 185369. |
| CVE-2020-4627 | IBM Cloud Pak for Security 1.3.0.1(CP4S) potentially vulnerable to CVS Injection. A remote attacker could execute arbitrary commands on the system, caused by improper validation of csv file contents. IBM X-Force ID: 185367. |
| CVE-2020-4626 | IBM Cloud Pak for Security 1.3.0.1 (CP4S) could reveal sensitive information about the internal network to an authenticated user using a specially crafted HTTP request. IBM X-Force ID: 185362. |
| CVE-2020-4625 | IBM Cloud Pak for Security 1.3.0.1(CP4S) could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie. |
| CVE-2020-4624 | IBM Cloud Pak for Security 1.3.0.1 (CP4S) uses weaker than expected cryptographic algorithms during negotiation could allow an attacker to decrypt sensitive information. |
| CVE-2020-4315 | IBM Business Automation Content Analyzer on Cloud 1.0 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 177234. |
| CVE-2020-4008 | The installer of the macOS Sensor for VMware Carbon Black Cloud (prior to 3.5.1) handles certain files in an insecure way. A malicious actor who has local access to the endpoint on which a macOS sensor is going to be installed, may overwrite a limited number of files with output from the sensor installation. |
| CVE-2020-3999 | VMware ESXi (7.0 prior to ESXi70U1c-17325551), VMware Workstation (16.x prior to 16.0 and 15.x prior to 15.5.7), VMware Fusion (12.x prior to 12.0 and 11.x prior to 11.5.7) and VMware Cloud Foundation contain a denial of service vulnerability due to improper input validation in GuestInfo. A malicious actor with normal user privilege access to a virtual machine can crash the virtual machine's vmx process leading to a denial of service condition. |
| CVE-2020-3956 | VMware Cloud Director 10.0.x before 10.0.0.2, 9.7.0.x before 9.7.0.5, 9.5.0.x before 9.5.0.6, and 9.1.0.x before 9.1.0.4 do not properly handle input leading to a code injection vulnerability. An authenticated actor may be able to send malicious traffic to VMware Cloud Director which may lead to arbitrary remote code execution. This vulnerability can be exploited through the HTML5- and Flex-based UIs, the API Explorer interface and API access. |
| CVE-2020-3808 | Creative Cloud Desktop Application versions 5.0 and earlier have a time-of-check to time-of-use (toctou) race condition vulnerability. Successful exploitation could lead to arbitrary file deletion. |
| CVE-2020-36667 | The JetBackup – WP Backup, Migrate & Restore plugin for WordPress is vulnerable to unauthorized back-up location changes in versions up to, and including 1.4.1 due to a lack of proper capability checking on the backup_guard_cloud_dropbox, backup_guard_cloud_gdrive, and backup_guard_cloud_oneDrive functions. This makes it possible for authenticated attackers, with minimal permissions, such as a subscriber to change to location of back-ups and potentially steal sensitive information from them. |
| CVE-2020-36164 | An issue was discovered in Veritas Enterprise Vault through 14.0. On start-up, it loads the OpenSSL library. The OpenSSL library then attempts to load the openssl.cnf configuration file (which does not exist) at the following locations in both the System drive (typically C:\) and the product's installation drive (typically not C:\): \Isode\etc\ssl\openssl.cnf (on SMTP Server) or \user\ssl\openssl.cnf (on other affected components). By default, on Windows systems, users can create directories under C:\. A low privileged user can create a openssl.cnf configuration file to load a malicious OpenSSL engine, resulting in arbitrary code execution as SYSTEM when the service starts. This gives the attacker administrator access on the system, allowing the attacker (by default) to access all data, access all installed applications, etc. This vulnerability only affects a server with MTP Server, SMTP Archiving IMAP Server, IMAP Archiving, Vault Cloud Adapter, NetApp File server, or File System Archiving for NetApp as File Server. |
| CVE-2020-35464 | Version 1.3.0 of the Weave Cloud Agent Docker image contains a blank password for the root user. Systems deployed using affected versions of the Weave Cloud Agent container may allow a remote attacker to achieve root access with a blank password. |
| CVE-2020-3155 | A vulnerability in the SSL implementation of the Cisco Intelligent Proximity solution could allow an unauthenticated, remote attacker to view or alter information shared on Cisco Webex video devices and Cisco collaboration endpoints if the products meet the conditions described in the Vulnerable Products section. The vulnerability is due to a lack of validation of the SSL server certificate received when establishing a connection to a Cisco Webex video device or a Cisco collaboration endpoint. An attacker could exploit this vulnerability by using man in the middle (MITM) techniques to intercept the traffic between the affected client and an endpoint, and then using a forged certificate to impersonate the endpoint. Depending on the configuration of the endpoint, an exploit could allow the attacker to view presentation content shared on it, modify any content being presented by the victim, or have access to call controls. This vulnerability does not affect cloud registered collaboration endpoints. |
| CVE-2020-3154 | A vulnerability in the web UI of Cisco Cloud Web Security (CWS) could allow an authenticated, remote attacker to execute arbitrary SQL queries. The vulnerability exists because the web-based management interface improperly validates SQL values. An authenticated attacker could exploit this vulnerability sending malicious requests to the affected device. An exploit could allow the attacker to modify values on or return values from the underlying database. |
| CVE-2020-29563 | An issue was discovered on Western Digital My Cloud OS 5 devices before 5.07.118. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to gain access to the device. |
| CVE-2020-28971 | An issue was discovered on Western Digital My Cloud OS 5 devices before 5.06.115. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to execute privileged commands on the device via a cookie, because of insufficient validation of URI paths. |
| CVE-2020-28970 | An issue was discovered on Western Digital My Cloud OS 5 devices before 5.06.115. A NAS Admin authentication bypass vulnerability could allow an unauthenticated user to execute privileged commands on the device via a cookie. (In addition, an upload endpoint could then be used by an authenticated administrator to upload executable PHP scripts.) |
| CVE-2020-28940 | On Western Digital My Cloud OS 5 devices before 5.06.115, the NAS Admin dashboard has an authentication bypass vulnerability that could allow an unauthenticated user to execute privileged commands on the device. |
| CVE-2020-28722 | Deskpro Cloud Platform and on-premise 2020.2.3.48207 from 2020-07-30 contains a cross-site scripting (XSS) vulnerability that can lead to an account takeover via custom email templates. |
| CVE-2020-27744 | An issue was discovered on Western Digital My Cloud NAS devices before 5.04.114. They allow remote code execution with resultant escalation of privileges. |
| CVE-2020-27488 | Loxone Miniserver devices with firmware before 11.1 (aka 11.1.9.3) are unable to use an authentication method that is based on the "signature of the update package." Therefore, these devices (or attackers who are spoofing these devices) can continue to use an unauthenticated cloud service for an indeterminate time period (possibly forever). Once an individual device's firmware is updated, and authentication occurs once, the cloud service recategorizes the device so that authentication is subsequently always required, and spoofing cannot occur. |
| CVE-2020-27160 | Addressed remote code execution vulnerability in AvailableApps.php that allowed escalation of privileges in Western Digital My Cloud NAS devices prior to 5.04.114 (issue 3 of 3). |
| CVE-2020-27159 | Addressed remote code execution vulnerability in DsdkProxy.php due to insufficient sanitization and insufficient validation of user input in Western Digital My Cloud NAS devices prior to 5.04.114 |
| CVE-2020-27158 | Addressed remote code execution vulnerability in cgi_api.php that allowed escalation of privileges in Western Digital My Cloud NAS devices prior to 5.04.114. |
| CVE-2020-26811 | SAP Commerce Cloud (Accelerator Payment Mock), versions - 1808, 1811, 1905, 2005, allows an unauthenticated attacker to submit a crafted request over a network to a particular SAP Commerce module URL which will be processed without further interaction, the crafted request leads to Server Side Request Forgery attack which could lead to retrieval of limited pieces of information about the service with no impact on integrity or availability. |
| CVE-2020-26810 | SAP Commerce Cloud (Accelerator Payment Mock), versions - 1808, 1811, 1905, 2005, allows an unauthenticated attacker to submit a crafted request over a network to a particular SAP Commerce module URL which will be processed without further interaction, the crafted request can render the SAP Commerce service itself unavailable leading to Denial of Service with no impact on confidentiality or integrity. |
| CVE-2020-26809 | SAP Commerce Cloud, versions- 1808,1811,1905,2005, allows an attacker to bypass existing authentication and permission checks via the '/medias' endpoint hence gaining access to Secure Media folders. This folder could contain sensitive files that results in disclosure of sensitive information and impact system configuration confidentiality. |
| CVE-2020-2626 | Vulnerability in the Enterprise Manager Base Platform product of Oracle Enterprise Manager (component: Cloud Control Manager - OMS). Supported versions that are affected are 12.1.0.5, 13.2.0.0 and 13.3.0.0. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Enterprise Manager Base Platform. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Enterprise Manager Base Platform accessible data as well as unauthorized update, insert or delete access to some of Enterprise Manager Base Platform accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Enterprise Manager Base Platform. CVSS 3.0 Base Score 6.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:L/A:L). |
| CVE-2020-26230 | Radar COVID is the official COVID-19 exposure notification app for Spain. In affected versions of Radar COVID, identification and de-anonymization of COVID-19 positive users that upload Radar COVID TEKs to the Radar COVID server is possible. This vulnerability enables the identification and de-anonymization of COVID-19 positive users when using Radar COVID. The vulnerability is caused by the fact that Radar COVID connections to the server (uploading of TEKs to the backend) are only made by COVID-19 positives. Therefore, any on-path observer with the ability to monitor traffic between the app and the server can identify which users had a positive test. Such an adversary can be the mobile network operator (MNO) if the connection is done through a mobile network, the Internet Service Provider (ISP) if the connection is done through the Internet (e.g., a home network), a VPN provider used by the user, the local network operator in the case of enterprise networks, or any eavesdropper with access to the same network (WiFi or Ethernet) as the user as could be the case of public WiFi hotspots deployed at shopping centers, airports, hotels, and coffee shops. The attacker may also de-anonymize the user. For this additional stage to succeed, the adversary needs to correlate Radar COVID traffic to other identifiable information from the victim. This could be achieved by associating the connection to a contract with the name of the victim or by associating Radar COVID traffic to other user-generated flows containing identifiers in the clear (e.g., HTTP cookies or other mobile flows sending unique identifiers like the IMEI or the AAID without encryption). The former can be executed, for instance, by the Internet Service Provider or the MNO. The latter can be executed by any on-path adversary, such as the network provider or even the cloud provider that hosts more than one service accessed by the victim. The farther the adversary is either from the victim (the client) or the end-point (the server), the less likely it may be that the adversary has access to re-identification information. The vulnerability has been mitigated with the injection of dummy traffic from the application to the backend. Dummy traffic is generated by all users independently of whether they are COVID-19 positive or not. The issue was fixed in iOS in version 1.0.8 (uniform distribution), 1.1.0 (exponential distribution), Android in version 1.0.7 (uniform distribution), 1.1.0 (exponential distribution), Backend in version 1.1.2-RELEASE. For more information see the referenced GitHub Security Advisory. |
| CVE-2020-25765 | Addressed remote code execution vulnerability in reg_device.php due to insufficient validation of user input.in Western Digital My Cloud Devices prior to 5.4.1140. |
| CVE-2020-25705 | A flaw in ICMP packets in the Linux kernel may allow an attacker to quickly scan open UDP ports. This flaw allows an off-path remote attacker to effectively bypass source port UDP randomization. Software that relies on UDP source port randomization are indirectly affected as well on the Linux Based Products (RUGGEDCOM RM1224: All versions between v5.0 and v6.4, SCALANCE M-800: All versions between v5.0 and v6.4, SCALANCE S615: All versions between v5.0 and v6.4, SCALANCE SC-600: All versions prior to v2.1.3, SCALANCE W1750D: v8.3.0.1, v8.6.0, and v8.7.0, SIMATIC Cloud Connect 7: All versions, SIMATIC MV500 Family: All versions, SIMATIC NET CP 1243-1 (incl. SIPLUS variants): Versions 3.1.39 and later, SIMATIC NET CP 1243-7 LTE EU: Version |
| CVE-2020-24786 | An issue was discovered in Zoho ManageEngine Exchange Reporter Plus before build number 5510, AD360 before build number 4228, ADSelfService Plus before build number 5817, DataSecurity Plus before build number 6033, RecoverManager Plus before build number 6017, EventLog Analyzer before build number 12136, ADAudit Plus before build number 6052, O365 Manager Plus before build number 4334, Cloud Security Plus before build number 4110, ADManager Plus before build number 7055, and Log360 before build number 5166. The remotely accessible Java servlet com.manageengine.ads.fw.servlet.UpdateProductDetails is prone to an authentication bypass. System integration properties can be modified and lead to full ManageEngine suite compromise. |
| CVE-2020-24445 | AEM's Cloud Service offering, as well as version 6.5.6.0 (and below), are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by an attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field. |
| CVE-2020-24422 | Adobe Creative Cloud Desktop Application version 5.2 (and earlier) and 2.1 (and earlier) for Windows is affected by an uncontrolled search path vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| CVE-2020-2157 | Jenkins Skytap Cloud CI Plugin 2.07 and earlier transmits configured credentials in plain text as part of job configuration forms, potentially resulting in their exposure. |
| CVE-2020-21139 | EC Cloud E-Commerce System v1.3 was discovered to contain a Cross-Site Request Forgery (CSRF) which allows attackers to arbitrarily add admin accounts via /admin.html?do=user&act=add. |
| CVE-2020-2025 | Kata Containers before 1.11.0 on Cloud Hypervisor persists guest filesystem changes to the underlying image file on the host. A malicious guest can overwrite the image file to gain control of all subsequent guest VMs. Since Kata Containers uses the same VM image file with all VMMs, this issue may also affect QEMU and Firecracker based guests. |
| CVE-2020-1982 | Certain communication between PAN-OS and cloud-delivered services inadvertently use TLS 1.0, which is known to be a cryptographically weak protocol. These cloud services include Cortex Data Lake, the Customer Support Portal, and the Prisma Access infrastructure. Conditions required for exploitation of known TLS 1.0 weaknesses do not exist for the communication between PAN-OS and cloud-delivered services. We do not believe that any communication is impacted as a result of known attacks against TLS 1.0. This issue impacts: All versions of PAN-OS 8.0; PAN-OS 8.1 versions earlier than PAN-OS 8.1.14; PAN-OS 9.0 versions earlier than PAN-OS 9.0.9; PAN-OS 9.1 versions earlier than PAN-OS 9.1.3. PAN-OS 7.1 is not impacted by this issue. |
| CVE-2020-1978 | TechSupport files generated on Palo Alto Networks VM Series firewalls for Microsoft Azure platform configured with high availability (HA) inadvertently collect Azure dashboard service account credentials. These credentials are equivalent to the credentials associated with the Contributor role in Azure. A user with the credentials will be able to manage all the Azure resources in the subscription except for granting access to other resources. These credentials do not allow login access to the VMs themselves. This issue affects VM Series Plugin versions before 1.0.9 for PAN-OS 9.0. This issue does not affect VM Series in non-HA configurations or on other cloud platforms. It does not affect hardware firewall appliances. Since becoming aware of the issue, Palo Alto Networks has safely deleted all the tech support files with the credentials. We now filter and remove these credentials from all TechSupport files sent to us. The TechSupport files uploaded to Palo Alto Networks systems were only accessible by authorized personnel with valid Palo Alto Networks credentials. We do not have any evidence of malicious access or use of these credentials. |
| CVE-2020-17136 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2020-17134 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2020-17103 | Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability |
| CVE-2020-1677 | When SAML authentication is enabled, Juniper Networks Mist Cloud UI might incorrectly handle child elements in SAML responses, allowing a remote attacker to modify a valid SAML response without invalidating its cryptographic signature to bypass SAML authentication security controls. This issue affects all Juniper Networks Mist Cloud UI versions prior to September 2 2020. |
| CVE-2020-1676 | When SAML authentication is enabled, Juniper Networks Mist Cloud UI might incorrectly handle SAML responses, allowing a remote attacker to modify a valid SAML response without invalidating its cryptographic signature to bypass SAML authentication security controls. This issue affects all Juniper Networks Mist Cloud UI versions prior to September 2 2020. |
| CVE-2020-1675 | When Security Assertion Markup Language (SAML) authentication is enabled, Juniper Networks Mist Cloud UI might incorrectly process invalid authentication certificates which could allow a malicious network-based user to access unauthorized data. This issue affects all Juniper Networks Mist Cloud UI versions prior to September 2 2020. |
| CVE-2020-15588 | An issue was discovered in the client side of Zoho ManageEngine Desktop Central 10.0.552.W. An attacker-controlled server can trigger an integer overflow in InternetSendRequestEx and InternetSendRequestByBitrate that leads to a heap-based buffer overflow and Remote Code Execution with SYSTEM privileges. This issue will occur only when untrusted communication is initiated with server. In cloud, Agent will always connect with trusted communication. |
| CVE-2020-15157 | In containerd (an industry-standard container runtime) before version 1.2.14 there is a credential leaking vulnerability. If a container image manifest in the OCI Image format or Docker Image V2 Schema 2 format includes a URL for the location of a specific image layer (otherwise known as a “foreign layer”), the default containerd resolver will follow that URL to attempt to download it. In v1.2.x but not 1.3.0 or later, the default containerd resolver will provide its authentication credentials if the server where the URL is located presents an HTTP 401 status code along with registry-specific HTTP headers. If an attacker publishes a public image with a manifest that directs one of the layers to be fetched from a web server they control and they trick a user or system into pulling the image, they can obtain the credentials used for pulling that image. In some cases, this may be the user's username and password for the registry. In other cases, this may be the credentials attached to the cloud virtual instance which can grant access to other cloud resources in the account. The default containerd resolver is used by the cri-containerd plugin (which can be used by Kubernetes), the ctr development tool, and other client programs that have explicitly linked against it. This vulnerability has been fixed in containerd 1.2.14. containerd 1.3 and later are not affected. If you are using containerd 1.3 or later, you are not affected. If you are using cri-containerd in the 1.2 series or prior, you should ensure you only pull images from trusted sources. Other container runtimes built on top of containerd but not using the default resolver (such as Docker) are not affected. |
| CVE-2020-14874 | Vulnerability in the Oracle Cloud Infrastructure Identity and Access Management product of Oracle Cloud Services. Easily exploitable vulnerability allows high privileged attacker with network access to compromise Oracle Cloud Infrastructure Identity and Access Management. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Cloud Infrastructure Identity and Access Management accessible data as well as unauthorized read access to a subset of Oracle Cloud Infrastructure Identity and Access Management accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Cloud Infrastructure Identity and Access Management. |
| CVE-2020-13186 | An Anti CSRF mechanism was discovered missing in the Teradici Cloud Access Connector v31 and earlier in a specific web form, which allowed an attacker with knowledge of both a machineID and user GUID to modify data if a user clicked a malicious link. |
| CVE-2020-13185 | Certain web application pages in the authenticated section of the Teradici Cloud Access Connector prior to v18 were accessible without the need to specify authentication tokens, which allowed an attacker in the ability to execute sensitive functions without credentials. |
| CVE-2020-13176 | The Management Interface of the Teradici Cloud Access Connector and Cloud Access Connector Legacy for releases prior to April 24, 2020 (v16 and earlier for the Cloud Access Connector) contains a stored cross-site scripting (XSS) vulnerability which allows a remote unauthenticated attacker to poison log files with malicious JavaScript via the login page which is executed when an administrator views the logs within the application. |
| CVE-2020-13175 | The Management Interface of the Teradici Cloud Access Connector and Cloud Access Connector Legacy for releases prior to April 20, 2020 (v15 and earlier for Cloud Access Connector) contains a local file inclusion vulnerability which allows an unauthenticated remote attacker to leak LDAP credentials via a specially crafted HTTP request. |
| CVE-2020-12830 | Addressed multiple stack buffer overflow vulnerabilities that could allow an attacker to carry out escalation of privileges through unauthorized remote code execution in Western Digital My Cloud devices before 5.04.114. |
| CVE-2020-12331 | Improper access controls in Intel Unite(R) Cloud Service client before version 4.2.12212 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| CVE-2020-12145 | Silver Peak Unity Orchestrator versions prior to 8.9.11+, 8.10.11+, or 9.0.1+ uses HTTP headers to authenticate REST API calls from localhost. This makes it possible to log in to Orchestrator by introducing an HTTP HOST header set to 127.0.0.1 or localhost. Orchestrator instances that are hosted by customers –on-premise or in a public cloud provider –are affected by this vulnerability. |
| CVE-2020-12144 | The certificate used to identify the Silver Peak Cloud Portal to EdgeConnect devices is not validated. This makes it possible for someone to establish a TLS connection from EdgeConnect to an untrusted portal. |
| CVE-2020-11933 | cloud-init as managed by snapd on Ubuntu Core 16 and Ubuntu Core 18 devices was run without restrictions on every boot, which a physical attacker could exploit by crafting cloud-init user-data/meta-data via external media to perform arbitrary changes on the device to bypass intended security mechanisms such as full disk encryption. This issue did not affect traditional Ubuntu systems. Fixed in snapd version 2.45.2, revision 8539 and core version 2.45.2, revision 9659. |
| CVE-2020-11922 | An issue was discovered in WiZ Colors A60 1.14.0. The device sends unnecessary information to the cloud controller server. Although this information is sent encrypted and has low risk in isolation, it decreases the privacy of the end user. The information sent includes the local IP address being used and the SSID of the Wi-Fi network the device is connected to. (Various resources such as wigle.net can be use for mapping of SSIDs to physical locations.) |
| CVE-2020-11872 | The Cloud Functions subsystem in OpenTrace 1.0 might allow fabrication attacks by making billions of TempID requests before an AES-256-GCM key rotation occurs. |
| CVE-2020-11853 | Arbitrary code execution vulnerability affecting multiple Micro Focus products. 1.) Operation Bridge Manager affecting version: 2020.05, 2019.11, 2019.05, 2018.11, 2018.05, versions 10.6x and 10.1x and older versions. 2.) Application Performance Management affecting versions : 9.51, 9.50 and 9.40 with uCMDB 10.33 CUP 3 3.) Data Center Automation affected version 2019.11 4.) Operations Bridge (containerized) affecting versions: 2019.11, 2019.08, 2019.05, 2018.11, 2018.08, 2018.05, 2018.02, 2017.11 5.) Universal CMDB affecting version: 2020.05, 2019.11, 2019.05, 2019.02, 2018.11, 2018.08, 2018.05, 11, 10.33, 10.32, 10.31, 10.30 6.) Hybrid Cloud Management affecting version 2020.05 7.) Service Management Automation affecting version 2020.5 and 2020.02. The vulnerability could allow to execute arbitrary code. |
| CVE-2020-11844 | Incorrect Authorization vulnerability in Micro Focus Container Deployment Foundation component affects products: - Hybrid Cloud Management. Versions 2018.05 to 2019.11. - ArcSight Investigate. versions 2.4.0, 3.0.0 and 3.1.0. - ArcSight Transformation Hub. versions 3.0.0, 3.1.0, 3.2.0. - ArcSight Interset. version 6.0.0. - ArcSight ESM (when ArcSight Fusion 1.0 is installed). version 7.2.1. - Service Management Automation (SMA). versions 2018.05 to 2020.02 - Operation Bridge Suite (Containerized). Versions 2018.05 to 2020.02. - Network Operation Management. versions 2017.11 to 2019.11. - Data Center Automation Containerized. versions 2018.05 to 2019.11 - Identity Intelligence. versions 1.1.0 and 1.1.1. The vulnerability could be exploited to provide unauthorized access to the Container Deployment Foundation. |
| CVE-2020-11622 | A vulnerability exists in Arista’s Cloud EOS VM / vEOS 4.23.2M and below releases in the 4.23.x train, 4.22.4M and below releases in the 4.22.x train, 4.21.3M to 4.21.9M releases in the 4.21.x train, 4.21.3FX-7368.*, 4.21.4-FCRFX.*, 4.21.4.1, 4.21.7.1, 4.22.2.0.1, 4.22.2.2.1, 4.22.3.1, and 4.23.2.1 Router code in a scenario where TCP MSS options are configured. |
| CVE-2020-11445 | TP-Link cloud cameras through 2020-02-09 allow remote attackers to bypass authentication and obtain sensitive information via vectors involving a Wi-Fi session with GPS enabled, aka CNVD-2020-04855. |
| CVE-2020-10951 | Western Digital My Cloud Home and ibi devices before 2.2.0 allow clickjacking on sign-in pages. |
| CVE-2020-10231 | TP-Link NC200 through 2.1.8_Build_171109, NC210 through 1.0.9_Build_171214, NC220 through 1.3.0_Build_180105, NC230 through 1.3.0_Build_171205, NC250 through 1.3.0_Build_171205, NC260 through 1.5.1_Build_190805, and NC450 through 1.5.0_Build_181022 devices allow a remote NULL Pointer Dereference. |
| CVE-2019-9951 | Western Digital My Cloud, My Cloud Mirror Gen2, My Cloud EX2 Ultra, My Cloud EX2100, My Cloud EX4100, My Cloud DL2100, My Cloud DL4100, My Cloud PR2100 and My Cloud PR4100 firmware before 2.31.174 is affected by an unauthenticated file upload vulnerability. The page web/jquery/uploader/uploadify.php can be accessed without any credentials, and allows uploading arbitrary files to any location on the attached storage. |
| CVE-2019-9950 | Western Digital My Cloud, My Cloud Mirror Gen2, My Cloud EX2 Ultra, My Cloud EX2100, My Cloud EX4100, My Cloud DL2100, My Cloud DL4100, My Cloud PR2100 and My Cloud PR4100 firmware before 2.31.174 is affected by an authentication bypass vulnerability. The login_mgr.cgi file checks credentials against /etc/shadow. However, the "nobody" account (which can be used to access the control panel API as a low-privilege logged-in user) has a default empty password, allowing an attacker to modify the My Cloud EX2 Ultra web page source code and obtain access to the My Cloud as a non-Admin My Cloud device user. |
| CVE-2019-9949 | Western Digital My Cloud Cloud, Mirror Gen2, EX2 Ultra, EX2100, EX4100, DL2100, DL4100, PR2100 and PR4100 before firmware 2.31.183 are affected by a code execution (as root, starting from a low-privilege user session) vulnerability. The cgi-bin/webfile_mgr.cgi file allows arbitrary file write by abusing symlinks. Specifically, this occurs by uploading a tar archive that contains a symbolic link, then uploading another archive that writes a file to the link using the "cgi_untar" command. Other commands might also be susceptible. Code can be executed because the "name" parameter passed to the cgi_unzip command is not sanitized. |
| CVE-2019-9946 | Cloud Native Computing Foundation (CNCF) CNI (Container Networking Interface) 0.7.4 has a network firewall misconfiguration which affects Kubernetes. The CNI 'portmap' plugin, used to setup HostPorts for CNI, inserts rules at the front of the iptables nat chains; which take precedence over the KUBE- SERVICES chain. Because of this, the HostPort/portmap rule could match incoming traffic even if there were better fitting, more specific service definition rules like NodePorts later in the chain. The issue is fixed in CNI 0.7.5 and Kubernetes 1.11.9, 1.12.7, 1.13.5, and 1.14.0. |
| CVE-2019-9945 | SoftNAS Cloud 4.2.0 and 4.2.1 allows remote command execution. The NGINX default configuration file has a check to verify the status of a user cookie. If not set, a user is redirected to the login page. An arbitrary value can be provided for this cookie to access the web interface without valid user credentials. If customers have not followed SoftNAS deployment best practices and expose SoftNAS StorageCenter ports directly to the internet, this vulnerability allows an attacker to gain access to the Webadmin interface to create new users or execute arbitrary commands with administrative privileges, compromising both the platform and the data. |
| CVE-2019-9872 | In several versions of JetBrains IntelliJ IDEA Ultimate, creating run configurations for cloud application servers leads to saving a cleartext unencrypted record of the server credentials in the IDE configuration files. If the Settings Repository plugin was then used and configured to synchronize IDE settings using a public repository, these credentials were published to this repository. The issue has been fixed in the following versions: 2019.1, 2018.3.5, 2018.2.8, and 2018.1.8. |
| CVE-2019-8236 | Creative Cloud Desktop Application version 4.6.1 and earlier versions have Security Bypass vulnerability. Successful exploitation could lead to Privilege Escalation in the context of the current user. |
| CVE-2019-8063 | Creative Cloud Desktop Application 4.6.1 and earlier versions have an insecure transmission of sensitive data vulnerability. Successful exploitation could lead to information leakage. |
| CVE-2019-7959 | Creative Cloud Desktop Application versions 4.6.1 and earlier have a using components with known vulnerabilities vulnerability. Successful exploitation could lead to arbitrary code execution. |
| CVE-2019-7958 | Creative Cloud Desktop Application versions 4.6.1 and earlier have an insecure inherited permissions vulnerability. Successful exploitation could lead to privilege escalation. |
| CVE-2019-7957 | Creative Cloud Desktop Application versions 4.6.1 and earlier have a security bypass vulnerability. Successful exploitation could lead to denial of service. |
| CVE-2019-7693 | Axios Italia Axios RE 1.7.0/7.0.0 devices have XSS via the RELogOff.aspx Error_Parameters parameter. In some situations, the XSS would be on the family.axioscloud.it cloud service; however, the vendor also supports "Sissi in Rete (con server)" for offline operation. |
| CVE-2019-7093 | Creative Cloud Desktop Application (installer) versions 4.7.0.400 and earlier have an insecure library loading (dll hijacking) vulnerability. Successful exploitation could lead to privilege escalation. |
| CVE-2019-6687 | On versions 15.0.0-15.0.1.1, the BIG-IP ASM Cloud Security Services profile uses a built-in verification mechanism that fails to properly authenticate the X.509 certificate of remote endpoints. |
| CVE-2019-6178 | An information leakage vulnerability in Iomega and LenovoEMC NAS products could allow disclosure of some device details such as Share names through the device API when Personal Cloud is enabled. This does not allow read, write, delete, or any other access to the underlying file systems and their contents. |
| CVE-2019-5625 | The Android mobile application Halo Home before 1.11.0 stores OAuth authentication and refresh access tokens in a clear text file. This file persists until the user logs out of the application and reboots the device. This vulnerability can allow an attacker to impersonate the legitimate user by reusing the stored OAuth token, thus allowing them to view and change the user's personal information stored in the backend cloud service. The attacker would first need to gain physical control of the Android device or compromise it with a malicious app. |
| CVE-2019-5286 | There is a reflection XSS vulnerability in the HedEx products. Remote attackers send malicious links to users and trick users to click. Successfully exploit cloud allow the attacker to initiate XSS attacks. Affects HedEx Lite versions earlier than V200R006C00SPC007. |
| CVE-2019-5271 | There is an information leak vulnerability in Huawei smart speaker Myna. When the smart speaker is paired with the cloud through Wi-Fi, the speaker incorrectly processes some data. Attackers can exploit this vulnerability to read and modify specific configurations of speakers through a series of operations. |
| CVE-2019-5161 | An exploitable remote code execution vulnerability exists in the Cloud Connectivity functionality of WAGO PFC200 versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). A specially crafted XML file will direct the Cloud Connectivity service to download and execute a shell script with root privileges. |
| CVE-2019-5160 | An exploitable improper host validation vulnerability exists in the Cloud Connectivity functionality of WAGO PFC200 Firmware versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). A specially crafted HTTPS POST request can cause the software to connect to an unauthorized host, resulting in unauthorized access to firmware update functionality. An attacker can send an authenticated HTTPS POST request to direct the Cloud Connectivity software to connect to an attacker controlled Azure IoT Hub node. |
| CVE-2019-5157 | An exploitable command injection vulnerability exists in the Cloud Connectivity functionality of WAGO PFC200 Firmware versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). An attacker can inject OS commands into the TimeoutUnconfirmed parameter value contained in the Firmware Update command. |
| CVE-2019-5156 | An exploitable command injection vulnerability exists in the cloud connectivity functionality of WAGO PFC200 versions 03.02.02(14), 03.01.07(13), and 03.00.39(12). An attacker can inject operating system commands into the TimeoutPrepared parameter value contained in the firmware update command. |
| CVE-2019-5155 | An exploitable command injection vulnerability exists in the cloud connectivity feature of WAGO PFC200. An attacker can inject operating system commands into any of the parameter values contained in the firmware update command. This affects WAGO PFC200 Firmware version 03.02.02(14), version 03.01.07(13), and version 03.00.39(12) |
| CVE-2019-4751 | IBM Cloud App Management 2019.3.0 and 2019.4.0 reveals a stack trace on certain API requests which can allow an attacker further information about the implementation of the offering. IBM X-Force ID: 173311. |
| CVE-2019-4750 | IBM Cloud App Management 2019.3.0 and 2019.4.0 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. IBM X-Force ID: 173310. |
| CVE-2019-4617 | IBM Cloud Automation Manager 3.2.1.0 does not renew a session variable after a successful authentication which could lead to session fixation/hijacking vulnerability. This could force a user to utilize a cookie that may be known to an attacker. IBM X-Force ID: 168645. |
| CVE-2019-4616 | IBM Cloud Automation Manager 3.2.1.0 does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. IBM X-Force ID: 168644. |
| CVE-2019-4521 | Platform System Manager in IBM Cloud Pak System 2.3 is potentially vulnerable to CVS Injection. A remote attacker could execute arbitrary commands on the system, caused by improper validation of csv file contents. IBM X-Force ID: 165179. |
| CVE-2019-4468 | IBM Cloud Pak System 2.3 and 2.3.0.1 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 163777. |
| CVE-2019-4467 | IBM Cloud Pak System 2.3 and 2.3.0.1 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 163776. |
| CVE-2019-4465 | IBM Cloud Pak System 2.3 and 2.3.0.1 allows web pages to be stored locally which can be read by another user on the system. IBM X-Force ID: 163774. |
| CVE-2019-4461 | IBM Cloud Orchestrator 2.4 through 2.4.0.5 and 2.5 through 2.5.0.9 is vulnerable to HTTP Response Splitting caused by improper caching of content. This would allow the attacker to perform further attacks, such as Web Cache poisoning, cross-site scripting and possibly obtain sensitive information. IBM X-Force ID: 163682. |
| CVE-2019-4459 | IBM Cloud Orchestrator and IBM Cloud Orchestrator Enterprise 2.5 through 2.5.0.9 and 2.4 through 2.4.0.5 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 163656. |
| CVE-2019-4439 | IBM Cloud Private 3.1.0, 3.1.1, and 3.1.2 does not invalidate session after logout which could allow a local user to impersonate another user on the system. IBM X-Force ID: 162949. |
| CVE-2019-4428 | IBM Watson Assistant for IBM Cloud Pak for Data 1.0.0 through 1.3.0 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 162807. |
| CVE-2019-4427 | IBM Cloud CLI 0.6.0 through 0.16.1 windows installers are signed using SHA1 certificate. An attacker might be able to exploit the weak algorithm to generate a installer with malicious software inside. IBM X-Force ID: 162773. |
| CVE-2019-4415 | IBM Cloud Private 3.1.1 and 3.1.2 could allow a local user to obtain elevated privileges due to improper security context constraints. IBM X-Force ID: 162706. |
| CVE-2019-4400 | IBM Cloud Orchestrator 2.4 through 2.4.0.5 and 2.5 through 2.5.0.9 could allow a remote attacker to traverse directories on the system. An attacker could send a specially-crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. IBM X-Force ID: 162261. |
| CVE-2019-4399 | IBM Cloud Orchestrator 2.4 through 2.4.0.5 and 2.5 through 2.5.0.9 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 162260. |
| CVE-2019-4398 | IBM Cloud Orchestrator and IBM Cloud Orchestrator Enterprise 2.5 through 2.5.0.9 and 2.4 through 2.4.0.5 could allow a local user to obtain sensitive information from SessionManagement cookies. IBM X-Force ID: 162259. |
| CVE-2019-4397 | IBM Cloud Orchestrator and IBM Cloud Orchestrator Enterprise 2.5 through 2.5.0.9 and 2.4 through 2.4.0.5 stores sensitive information in URL parameters. This may lead to information disclosure if unauthorized parties have access to the URLs via server logs, referrer header or browser history. IBM X-Force ID: 162239 |
| CVE-2019-4396 | IBM Cloud Orchestrator 2.4 through 2.4.0.5 and 2.5 through 2.5.0.9 is vulnerable to HTTP response splitting attacks, caused by improper validation of user-supplied input. A remote attacker could exploit this vulnerability to inject arbitrary HTTP headers and cause the server to return a split response, once the URL is clicked. This would allow the attacker to perform further attacks, such as Web cache poisoning or cross-site scripting, and possibly obtain sensitive information. IBM X-Force ID: 162236. |
| CVE-2019-4395 | IBM Cloud Orchestrator 2.4 through 2.4.0.5 and 2.5 through 2.5.0.9 could allow a local user to obtain sensitive information from temporary script files. IBM X-Force ID: 162333. |
| CVE-2019-4394 | IBM Cloud Orchestrator 2.4 through 2.4.0.5 and 2.5 through 2.5.0.9 contain APIs that could be used by a local user to send email. IBM X-Force ID: 162232. |
| CVE-2019-4284 | IBM Cloud Private 2.1.0 , 3.1.0, 3.1.1, and 3.1.2 could allow a local privileged user to obtain sensitive OIDC token that is printed to log files, which could be used to log in to the system as another user. IBM X-Force ID: 160512. |
| CVE-2019-4239 | IBM MQ Advanced Cloud Pak (IBM Cloud Private 1.0.0 through 3.0.1) stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 159465. |
| CVE-2019-4226 | IBM Cloud Pak System 2.3 and 2.3.0.1 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 159243. |
| CVE-2019-4143 | The IBM Cloud Private Key Management Service (IBM Cloud Private 3.1.1 and 3.1.2) could allow a local user to obtain sensitive from the KMS plugin container log. IBM X-Force ID: 158348. |
| CVE-2019-4142 | IBM Cloud Private 2.1.0, 3.1.0, 3.1.1, and 3.1.2 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. IBM X-Force ID: 158338. |
| CVE-2019-4133 | IBM Cloud Automation Manager 3.1.2 could allow a malicious user on the client side (with access to client computer) to run a custom script. IBM X-Force ID: 158278. |
| CVE-2019-4132 | IBM Cloud Automation Manager 3.1.2 could allow a user to be impropertly redirected and obtain sensitive information rather than receive a 404 error message. IBM X-Force ID: 158274. |
| CVE-2019-4130 | IBM Cloud Pak System 2.3 and 2.3.0.1 could allow a remote attacker to upload arbitrary files, which could allow the attacker to execute arbitrary code on the vulnerable server. IBM X-Force ID: 158280. |
| CVE-2019-4120 | IBM Cloud Private 3.1.1 and 3.1.2 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 158146. |
| CVE-2019-4119 | IBM Cloud Private Kubernetes API server 2.1.0, 3.1.0, 3.1.1, and 3.1.2 can be used as an HTTP proxy to not only cluster internal but also external target IP addresses. IBM X-Force ID: 158145. |
| CVE-2019-4117 | IBM Cloud Private 3.1.1 and 3.1.2 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. IBM X-Force ID: 158116. |
| CVE-2019-4116 | IBM Cloud Private 2.1.0, 3.1.0, and 3.1.1 could disclose highly sensitive information in installer logs that could be use for further attacks against the system. IBM X-Force ID: 158115. |
| CVE-2019-4098 | IBM Cloud Pak System 2.3 and 2.3.0.1 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 158020. |
| CVE-2019-4095 | IBM Cloud Pak System 2.3 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. IBM X-Force ID: 158015. |
| CVE-2019-4086 | IBM Cloud Application Performance Management 8.1.4 could allow a remote attacker to hijack the clicking action of the victim. By persuading a victim to visit a malicious Web site, a remote attacker could exploit this vulnerability to hijack the victim's click actions and possibly launch further attacks against the victim. IBM X-Force ID: 157509. |
| CVE-2019-3895 | An access-control flaw was found in the Octavia service when the cloud platform was deployed using Red Hat OpenStack Platform Director. An attacker could cause new amphorae to run based on any arbitrary image. This meant that a remote attacker could upload a new amphorae image and, if requested to spawn new amphorae, Octavia would then pick up the compromised image. |
| CVE-2019-3801 | Cloud Foundry cf-deployment, versions prior to 7.9.0, contain java components that are using an insecure protocol to fetch dependencies when building. A remote unauthenticated malicious attacker could hijack the DNS entry for the dependency, and inject malicious code into the component. |
| CVE-2019-3799 | Spring Cloud Config, versions 2.1.x prior to 2.1.2, versions 2.0.x prior to 2.0.4, and versions 1.4.x prior to 1.4.6, and older unsupported versions allow applications to serve arbitrary configuration files through the spring-cloud-config-server module. A malicious user, or attacker, can send a request using a specially crafted URL that can lead a directory traversal attack. |
| CVE-2019-3798 | Cloud Foundry Cloud Controller API Release, versions prior to 1.79.0, contains improper authentication when validating user permissions. A remote authenticated malicious user with the ability to create UAA clients and knowledge of the email of a victim in the foundation may escalate their privileges to that of the victim by creating a client with a name equal to the guid of their victim. |
| CVE-2019-3794 | Cloud Foundry UAA, versions prior to v73.4.0, does not set an X-FRAME-OPTIONS header on various endpoints. A remote user can perform clickjacking attacks on UAA's frontend sites. |
| CVE-2019-3789 | Cloud Foundry Routing Release, all versions prior to 0.188.0, contains a vulnerability that can hijack the traffic to route services hosted outside the platform. A user with space developer permissions can create a private domain that shadows the external domain of the route service, and map that route to an app. When the gorouter receives traffic destined for the external route service, this traffic will instead be directed to the internal app using the shadow route. |
| CVE-2019-3788 | Cloud Foundry UAA Release, versions prior to 71.0, allows clients to be configured with an insecure redirect uri. Given a UAA client was configured with a wildcard in the redirect uri's subdomain, a remote malicious unauthenticated user can craft a phishing link to get a UAA access code from the victim. |
| CVE-2019-3787 | Cloud Foundry UAA, versions prior to 73.0.0, falls back to appending “unknown.org” to a user's email address when one is not provided and the user name does not contain an @ character. This domain is held by a private company, which leads to attack vectors including password recovery emails sent to a potentially fraudulent address. This would allow the attacker to gain complete control of the user's account. |
| CVE-2019-3786 | Cloud Foundry BOSH Backup and Restore CLI, all versions prior to 1.5.0, does not check the authenticity of backup scripts in BOSH. A remote authenticated malicious user can modify the metadata file of a Bosh Backup and Restore job to request extra backup files from different jobs upon restore. The exploited hooks in this metadata script were only maintained in the cfcr-etcd-release, so clusters deployed with the BBR job for etcd in this release are vulnerable. |
| CVE-2019-3785 | Cloud Foundry Cloud Controller, versions prior to 1.78.0, contain an endpoint with improper authorization. A remote authenticated malicious user with read permissions can request package information and receive a signed bit-service url that grants the user write permissions to the bit-service. |
| CVE-2019-3784 | Cloud Foundry Stratos, versions prior to 2.3.0, contains an insecure session that can be spoofed. When deployed on cloud foundry with multiple instances using the default embedded SQLite database, a remote authenticated malicious user can switch sessions to another user with the same session id. |
| CVE-2019-3783 | Cloud Foundry Stratos, versions prior to 2.3.0, deploys with a public default session store secret. A malicious user with default session store secret can brute force another user's current Stratos session, and act on behalf of that user. |
| CVE-2019-3782 | Cloud Foundry CredHub CLI, versions prior to 2.2.1, inadvertently writes authentication credentials provided via environment variables to its persistent config file. A local authenticated malicious user with access to the CredHub CLI config file can use these credentials to retrieve and modify credentials stored in CredHub that are authorized to the targeted user. |
| CVE-2019-3781 | Cloud Foundry CLI, versions prior to v6.43.0, improperly exposes passwords when verbose/trace/debugging is turned on. A local unauthenticated or remote authenticated malicious user with access to logs may gain part or all of a users password. |
| CVE-2019-3780 | Cloud Foundry Container Runtime, versions prior to 0.28.0, deploys K8s worker nodes that contains a configuration file with IAAS credentials. A malicious user with access to the k8s nodes can obtain IAAS credentials allowing the user to escalate privileges to gain access to the IAAS account. |
| CVE-2019-3779 | Cloud Foundry Container Runtime, versions prior to 0.29.0, deploys Kubernetes clusters utilize the same CA (Certificate Authority) to sign and trust certs for ETCD as used by the Kubernetes API. This could allow a user authenticated with a cluster to request a signed certificate leveraging the Kubernetes CSR capability to obtain a credential that could escalate privilege access to ETCD. |
| CVE-2019-3777 | Pivotal Application Service (PAS), versions 2.2.x prior to 2.2.12, 2.3.x prior to 2.3.7 and 2.4.x prior to 2.4.3, contain apps manager that uses a cloud controller proxy that fails to verify SSL certs. A remote unauthenticated attacker that could hijack the Cloud Controller's DNS record could intercept access tokens sent to the Cloud Controller, giving the attacker access to the user's resources in the Cloud Controller |
| CVE-2019-3775 | Cloud Foundry UAA, versions prior to v70.0, allows a user to update their own email address. A remote authenticated user can impersonate a different user by changing their email address to that of a different user. |
| CVE-2019-3747 | Dell EMC Integrated Data Protection Appliance versions prior to 2.3 contain a stored cross-site scripting vulnerability. A remote malicious ACM admin user may potentially exploit this vulnerability to store malicious HTML or JavaScript code in Cloud DR add-on specific field. When victim users access the page through their browsers, the malicious code gets executed by the web browser in the context of the vulnerable web application. |
| CVE-2019-3683 | The keystone-json-assignment package in SUSE Openstack Cloud 8 before commit d7888c75505465490250c00cc0ef4bb1af662f9f every user listed in the /etc/keystone/user-project-map.json was assigned full "member" role access to every project. This allowed these users to access, modify, create and delete arbitrary resources, contrary to expectations. |
| CVE-2019-3604 | Cross-Site Request Forgery (CSRF) vulnerability in McAfee ePO (legacy) Cloud allows unauthenticated users to perform unintended ePO actions using an authenticated user's session via unspecified vectors. |
| CVE-2019-25210 | ** DISPUTED ** An issue was discovered in Cloud Native Computing Foundation (CNCF) Helm through 3.13.3. It displays values of secrets when the --dry-run flag is used. This is a security concern in some use cases, such as a --dry-run call by a CI/CD tool. NOTE: the vendor's position is that this behavior was introduced intentionally, and cannot be removed without breaking backwards compatibility (some users may be relying on these values). Also, it is not the Helm Project's responsibility if a user decides to use --dry-run within a CI/CD environment whose output is visible to unauthorized persons. |
| CVE-2019-20836 | An issue was discovered in Foxit Reader and PhantomPDF before 9.5. It has mishandling of cloud credentials, as demonstrated by Google Drive. |
| CVE-2019-20833 | An issue was discovered in Foxit PhantomPDF before 8.3.10. It has mishandling of cloud credentials, as demonstrated by Google Drive. |
| CVE-2019-19724 | Insecure permissions (777) are set on $HOME/.singularity when it is newly created by Singularity (version from 3.3.0 to 3.5.1), which could lead to an information leak, and malicious redirection of operations performed against Sylabs cloud services. |
| CVE-2019-19632 | An issue was discovered in Big Switch Big Monitoring Fabric 6.2 through 6.2.4, 6.3 through 6.3.9, 7.0 through 7.0.3, and 7.1 through 7.1.3; Big Cloud Fabric 4.5 through 4.5.5, 4.7 through 4.7.7, 5.0 through 5.0.1, and 5.1 through 5.1.4; and Multi-Cloud Director through 1.1.0. An unauthenticated attacker may inject stored arbitrary JavaScript (XSS), and execute it in the content of authenticated administrators. |
| CVE-2019-19631 | An issue was discovered in Big Switch Big Monitoring Fabric 6.2 through 6.2.4, 6.3 through 6.3.9, 7.0 through 7.0.3, and 7.1 through 7.1.3; Big Cloud Fabric 4.5 through 4.5.5, 4.7 through 4.7.7, 5.0 through 5.0.1, and 5.1 through 5.1.4; and Multi-Cloud Director through 1.1.0. A read-only user can access sensitive information via an API endpoint that reveals session cookies of authenticated administrators, leading to privilege escalation. |
| CVE-2019-19030 | Cloud Native Computing Foundation Harbor before 1.10.3 and 2.x before 2.0.1 allows resource enumeration because unauthenticated API calls reveal (via the HTTP status code) whether a resource exists. |
| CVE-2019-19029 | Cloud Native Computing Foundation Harbor prior to 1.8.6 and 1.9.3 allows SQL Injection via user-groups in the VMware Harbor Container Registry for the Pivotal Platform. |
| CVE-2019-19026 | Cloud Native Computing Foundation Harbor prior to 1.8.6 and 1.9.3 allows SQL Injection via project quotas in the VMware Harbor Container Registry for the Pivotal Platform. |
| CVE-2019-19025 | Cloud Native Computing Foundation Harbor prior to 1.8.6 and 1.9.3 allows CSRF in the VMware Harbor Container Registry for the Pivotal Platform. |
| CVE-2019-19023 | Cloud Native Computing Foundation Harbor prior to 1.8.6 and 1.9.3 has a Privilege Escalation Vulnerability in the VMware Harbor Container Registry for the Pivotal Platform. |
| CVE-2019-18931 | Western Digital My Cloud EX2 Ultra firmware 2.31.195 allows a Buffer Overflow with Extended Instruction Pointer (EIP) control via crafted GET/POST parameters. |
| CVE-2019-18930 | Western Digital My Cloud EX2 Ultra firmware 2.31.183 allows web users (including guest account) to remotely execute arbitrary code via a stack-based buffer overflow. There is no size verification logic in one of functions in libscheddl.so, and download_mgr.cgi makes it possible to enter large-sized f_idx inputs. |
| CVE-2019-18929 | Western Digital My Cloud EX2 Ultra firmware 2.31.183 allows web users (including guest accounts) to remotely execute arbitrary code via a download_mgr.cgi stack-based buffer overflow. |
| CVE-2019-18904 | A Uncontrolled Resource Consumption vulnerability in rmt of SUSE Linux Enterprise High Performance Computing 15-ESPOS, SUSE Linux Enterprise High Performance Computing 15-LTSS, SUSE Linux Enterprise Module for Public Cloud 15-SP1, SUSE Linux Enterprise Module for Server Applications 15, SUSE Linux Enterprise Module for Server Applications 15-SP1, SUSE Linux Enterprise Server 15-LTSS, SUSE Linux Enterprise Server for SAP 15; openSUSE Leap 15.1 allows remote attackers to cause DoS against rmt by requesting migrations. This issue affects: SUSE Linux Enterprise High Performance Computing 15-ESPOS rmt-server versions prior to 2.5.2-3.26.1. SUSE Linux Enterprise High Performance Computing 15-LTSS rmt-server versions prior to 2.5.2-3.26.1. SUSE Linux Enterprise Module for Public Cloud 15-SP1 rmt-server versions prior to 2.5.2-3.9.1. SUSE Linux Enterprise Module for Server Applications 15 rmt-server versions prior to 2.5.2-3.26.1. SUSE Linux Enterprise Module for Server Applications 15-SP1 rmt-server versions prior to 2.5.2-3.9.1. SUSE Linux Enterprise Server 15-LTSS rmt-server versions prior to 2.5.2-3.26.1. SUSE Linux Enterprise Server for SAP 15 rmt-server versions prior to 2.5.2-3.26.1. openSUSE Leap 15.1 rmt-server versions prior to 2.5.2-lp151.2.9.1. |
| CVE-2019-18191 | A privilege escalation vulnerability in the Trend Micro Deep Security as a Service Quick Setup cloud formation template could allow an authenticated entity with certain unrestricted AWS execution privileges to escalate to full privileges within the target AWS account. |
| CVE-2019-1792 | A vulnerability in the URL block page of Cisco Umbrella could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user in a network protected by Umbrella. The vulnerability is due to insufficient validation of input parameters passed to that page. An attacker could exploit this vulnerability by persuading a user of the interface to click a maliciously crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive browser-based information. This vulnerability has been fixed in the current version of Cisco Umbrella. Cisco Umbrella is a cloud service. |
| CVE-2019-17275 | OnCommand Cloud Manager versions prior to 3.8.0 are susceptible to arbitrary code execution by remote attackers. |
| CVE-2019-17176 | Genesys PureEngage Digital (eServices) 8.1.x allows XSS via HtmlChatPanel.jsp or HtmlChatFrameSet.jsp (ActionColor, ClientNickNameColor, Email, email, or email_address parameter). |
| CVE-2019-1584 | A security vulnerability exists in Zingbox Inspector version 1.293 and earlier, that allows for remote code execution if the Inspector were sent a malicious command from the Zingbox cloud, or if the Zingbox Inspector were tampered with to connect to an attacker's cloud endpoint. |
| CVE-2019-15689 | Kaspersky Secure Connection, Kaspersky Internet Security, Kaspersky Total Security, Kaspersky Security Cloud prior to version 2020 patch E have bug that allows a local user to execute arbitrary code via execution compromised file placed by an attacker with administrator rights. No privilege escalation. Possible whitelisting bypass some of the security products |
| CVE-2019-15688 | Kaspersky Anti-Virus, Kaspersky Internet Security, Kaspersky Total Security, Kaspersky Free Anti-Virus, Kaspersky Small Office Security, Kaspersky Security Cloud up to 2020, the web protection component did not adequately inform the user about the threat of redirecting to an untrusted site. Bypass. |
| CVE-2019-15687 | Kaspersky Anti-Virus, Kaspersky Internet Security, Kaspersky Total Security, Kaspersky Free Anti-Virus, Kaspersky Small Office Security, Kaspersky Security Cloud up to 2020, the web protection component was vulnerable to remote disclosure of various information about the user's system (like Windows version and version of the product, host unique ID). Information Disclosure. |
| CVE-2019-15686 | Kaspersky Anti-Virus, Kaspersky Internet Security, Kaspersky Total Security, Kaspersky Free Anti-Virus, Kaspersky Small Office Security, Kaspersky Security Cloud up to 2020, the web protection component allowed an attacker remotely disable various anti-virus protection features. DoS, Bypass. |
| CVE-2019-15685 | Kaspersky Anti-Virus, Kaspersky Internet Security, Kaspersky Total Security, Kaspersky Free Anti-Virus, Kaspersky Small Office Security, Kaspersky Security Cloud up to 2020, the web protection component allowed an attacker remotely disable such product's security features as private browsing and anti-banner. Bypass. |
| CVE-2019-15304 | Lierda Grill Temperature Monitor V1.00_50006 has a default password of admin for the admin account, which allows an attacker to cause a Denial of Service or Information Disclosure via the undocumented access-point configuration page located on the device. This wifi thermometer app requests and requires excessive permissions to operate such as Fine GPS location, camera, applists, Serial number, IMEI. In addition to the "backdoor" login access for "admin" purposes, this accompanying app also establishes connections with several china based URLs to include Alibaba cloud computing. NOTE: this device also ships with ProGrade branding. |
| CVE-2019-14260 | On the Alcatel-Lucent Enterprise (ALE) 8008 Cloud Edition Deskphone VoIP phone with firmware 1.50.13, a command injection (missing input validation) issue in the password change field for the Change Password interface allows an authenticated remote attacker in the same network to trigger OS commands via shell commands in a POST request. |
| CVE-2019-13498 | One Identity Cloud Access Manager 8.1.3 does not use HTTP Strict Transport Security (HSTS), which may allow man-in-the-middle (MITM) attacks. This issue is fixed in version 8.1.4. |
| CVE-2019-13497 | One Identity Cloud Access Manager before 8.1.4 Hotfix 1 allows CSRF for logout requests. |
| CVE-2019-13496 | One Identity Cloud Access Manager before 8.1.4 Hotfix 1 allows OTP bypass via vectors involving a man in the middle, the One Identity Defender product, and replacing a failed SAML response with a successful SAML response. |
| CVE-2019-13171 | Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by one or more stack-based buffer overflow vulnerabilities in the Google Cloud Print implementation that would allow an unauthenticated attacker to execute arbitrary code on the device. This was caused by an insecure handling of the register parameters, because the size used within a memcpy() function, which copied the action value into a local variable, was not checked properly. |
| CVE-2019-13163 | The Fujitsu TLS library allows a man-in-the-middle attack. This affects Interstage Application Development Cycle Manager V10 and other versions, Interstage Application Server V12 and other versions, Interstage Business Application Manager V2 and other versions, Interstage Information Integrator V11 and other versions, Interstage Job Workload Server V8, Interstage List Works V10 and other versions, Interstage Studio V12 and other versions, Interstage Web Server Express V11, Linkexpress V5, Safeauthor V3, ServerView Resource Orchestrator V3, Systemwalker Cloud Business Service Management V1, Systemwalker Desktop Keeper V15, Systemwalker Desktop Patrol V15, Systemwalker IT Change Manager V14, Systemwalker Operation Manager V16 and other versions, Systemwalker Runbook Automation V15 and other versions, Systemwalker Security Control V1, and Systemwalker Software Configuration Manager V15. |
| CVE-2019-13156 | NDrive(1.2.2).sys in Naver Cloud Explorer has a stack-based buffer overflow, which allows attackers to cause a denial of service when reading data from IOCTL handle. |
| CVE-2019-12942 | TTLock devices do not properly block guest access in certain situations where the network connection to the cloud is unavailable. |
| CVE-2019-12753 | An information disclosure vulnerability in Symantec Reporter web UI 10.3 prior to 10.3.2.5 allows a malicious authenticated administrator user to obtain passwords for external SMTP, FTP, FTPS, LDAP, and Cloud Log Download servers that they might not otherwise be authorized to access. The malicious administrator user can also obtain the passwords of other Reporter web UI users. |
| CVE-2019-12591 | NETGEAR Insight Cloud with firmware before Insight 5.6 allows remote authenticated users to achieve command injection. |
| CVE-2019-12491 | OnApp before 5.0.0-88, 5.5.0-93, and 6.0.0-196 allows an attacker to run arbitrary commands with root privileges on servers managed by OnApp for XEN/KVM hypervisors. To exploit the vulnerability an attacker has to have control of a single server on a given cloud (e.g. by renting one). From the source server, the attacker can craft any command and trigger the OnApp platform to execute that command with root privileges on a target server. |
| CVE-2019-12477 | Supra Smart Cloud TV allows remote file inclusion in the openLiveURL function, which allows a local attacker to broadcast fake video without any authentication via a /remote/media_control?action=setUri&uri= URI. |
| CVE-2019-12274 | In Rancher 1 and 2 through 2.2.3, unprivileged users (if allowed to deploy nodes) can gain admin access to the Rancher management plane because node driver options intentionally allow posting certain data to the cloud. The problem is that a user could choose to post a sensitive file such as /root/.kube/config or /var/lib/rancher/management-state/cred/kubeconfig-system.yaml. |
| CVE-2019-11294 | Cloud Foundry Cloud Controller API (CAPI), version 1.88.0, allows space developers to list all global service brokers, including service broker URLs and GUIDs, which should only be accessible to admins. |
| CVE-2019-11293 | Cloud Foundry UAA Release, versions prior to v74.10.0, when set to logging level DEBUG, logs client_secret credentials when sent as a query parameter. A remote authenticated malicious user could gain access to user credentials via the uaa.log file if authentication is provided via query parameters. |
| CVE-2019-11290 | Cloud Foundry UAA Release, versions prior to v74.8.0, logs all query parameters to tomcat’s access file. If the query parameters are used to provide authentication, ie. credentials, then they will be logged as well. |
| CVE-2019-11289 | Cloud Foundry Routing, all versions before 0.193.0, does not properly validate nonce input. A remote unauthenticated malicious user could forge an HTTP route service request using an invalid nonce that will cause the Gorouter to crash. |
| CVE-2019-11283 | Cloud Foundry SMB Volume, versions prior to v2.0.3, accidentally outputs sensitive information to the logs. A remote user with access to the SMB Volume logs can discover the username and password for volumes that have been recently created, allowing the user to take control of the SMB Volume. |
| CVE-2019-11282 | Cloud Foundry UAA, versions prior to v74.3.0, contains an endpoint that is vulnerable to SCIM injection attack. A remote authenticated malicious user with scim.invite scope can craft a request with malicious content which can leak information about users of the UAA. |
| CVE-2019-11277 | Cloud Foundry NFS Volume Service, 1.7.x versions prior to 1.7.11 and 2.x versions prior to 2.3.0, is vulnerable to LDAP injection. A remote authenticated malicious space developer can potentially inject LDAP filters via service instance creation, facilitating the malicious space developer to deny service or perform a dictionary attack. |
| CVE-2019-11274 | Cloud Foundry UAA, versions prior to 74.0.0, is vulnerable to an XSS attack. A remote unauthenticated malicious attacker could craft a URL that contains a SCIM filter that contains malicious JavaScript, which older browsers may execute. |
| CVE-2019-11271 | Cloud Foundry BOSH 270.x versions prior to v270.1.1, contain a BOSH Director that does not properly redact credentials when configured to use a MySQL database. A local authenticated malicious user may read any credentials that are contained in a BOSH manifest. |
| CVE-2019-11270 | Cloud Foundry UAA versions prior to v73.4.0 contain a vulnerability where a malicious client possessing the 'clients.write' authority or scope can bypass the restrictions imposed on clients created via 'clients.write' and create clients with arbitrary scopes that the creator does not possess. |
| CVE-2019-11268 | Cloud Foundry UAA version prior to 73.3.0, contain endpoints that contains improper escaping. An authenticated malicious user with basic read privileges for one identity zone can extend those reading privileges to all other identity zones and obtain private information on users, clients, and groups in all other identity zones. |
| CVE-2019-10457 | A missing permission check in Jenkins Oracle Cloud Infrastructure Compute Classic Plugin allows attackers with Overall/Read permission to connect to an attacker-specified URL using attacker-specified credentials. |
| CVE-2019-10456 | A cross-site request forgery vulnerability in Jenkins Oracle Cloud Infrastructure Compute Classic Plugin allows attackers to connect to an attacker-specified URL using attacker-specified credentials. |
| CVE-2019-10391 | Jenkins IBM Application Security on Cloud Plugin 1.2.4 and earlier transmitted configured passwords in plain text as part of job configuration forms, potentially resulting in their exposure. |
| CVE-2019-10379 | Jenkins Google Cloud Messaging Notification Plugin 1.0 and earlier stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system. |
| CVE-2019-10366 | Jenkins Skytap Cloud CI Plugin 2.06 and earlier stored credentials unencrypted in job config.xml files on the Jenkins master where they could be viewed by users with Extended Read permission, or access to the master file system. |
| CVE-2019-10291 | Jenkins Netsparker Cloud Scan Plugin 1.1.5 and older stored credentials unencrypted in its global configuration file on the Jenkins master where they could be viewed by users with access to the master file system. |
| CVE-2019-10290 | A missing permission check in Jenkins Netsparker Cloud Scan Plugin 1.1.5 and older in the NCScanBuilder.DescriptorImpl#doValidateAPI form validation method allowed attackers with Overall/Read permission to initiate a connection to an attacker-specified server. |
| CVE-2019-10289 | A cross-site request forgery vulnerability in Jenkins Netsparker Cloud Scan Plugin 1.1.5 and older in the NCScanBuilder.DescriptorImpl#doValidateAPI form validation method allowed attackers to initiate a connection to an attacker-specified server. |
| CVE-2019-10267 | An insecure file upload and code execution issue was discovered in Ahsay Cloud Backup Suite 8.1.0.50. It is possible to upload a file into any directory of the server. One can insert a JSP shell into the web server's directory and execute it. This leads to full access to the system, as the configured user (e.g., Administrator). |
| CVE-2019-10266 | An issue was discovered in Ahsay Cloud Backup Suite before 8.1.1.50. When sending an out-of-bounds XML document to a URL, it is possible to read the file structure and even the content of files without authentication. |
| CVE-2019-10265 | An issue was discovered in Ahsay Cloud Backup Suite before 8.1.1.50. On the /cbs/system/ShowAdvanced.do "File Explorer" screen, it is possible to change the directory in the JavaScript code. If changed to (for example) "C:" then one can browse the whole server. |
| CVE-2019-10264 | An issue was discovered in Ahsay Cloud Backup Suite before 8.1.1.50. With a valid administrator account, the "Move / Import / Export Users" screen has an Import Users option. This option accepts a ZIP archive containing a users.xml file that can trigger XXE. |
| CVE-2019-10263 | An issue was discovered in Ahsay Cloud Backup Suite before 8.1.1.50. When creating a trial account, it is possible to inject XSS in the Alias field, allowing the attacker to retrieve the admin's cookie and take over the account. |
| CVE-2019-1010259 | SaltStack Salt 2018.3, 2019.2 is affected by: SQL Injection. The impact is: An attacker could escalate privileges on MySQL server deployed by cloud provider. It leads to RCE. The component is: The mysql.user_chpass function from the MySQL module for Salt. The attack vector is: specially crafted password string. The fixed version is: 2018.3.4. |
| CVE-2019-1003025 | A exposure of sensitive information vulnerability exists in Jenkins Cloud Foundry Plugin 2.3.1 and earlier in AbstractCloudFoundryPushDescriptor.java that allows attackers with Overall/Read access to connect to an attacker-specified URL using attacker-specified credentials IDs obtained through another method, capturing credentials stored in Jenkins. |
| CVE-2019-0816 | A security feature bypass exists in Azure SSH Keypairs, due to a change in the provisioning logic for some Linux images that use cloud-init, aka 'Azure SSH Keypairs Security Feature Bypass Vulnerability'. |
| CVE-2019-0344 | Due to unsafe deserialization used in SAP Commerce Cloud (virtualjdbc extension), versions 6.4, 6.5, 6.6, 6.7, 1808, 1811, 1905, it is possible to execute arbitrary code on a target machine with 'Hybris' user rights, resulting in Code Injection. |
| CVE-2019-0343 | SAP Commerce Cloud (Mediaconversion Extension), versions 6.4, 6.5, 6.6, 6.7, 1808, 1811, 1905, allows an authenticated Backoffice/HMC user to inject code that can be executed by the application, leading to Code Injection. An attacker could thereby control the behavior of the application. |
| CVE-2019-0322 | SAP Commerce Cloud (previously known as SAP Hybris Commerce), (HY_COM, versions 6.3, 6.4, 6.5, 6.6, 6.7, 1808, 1811), allows an attacker to prevent legitimate users from accessing a service, either by crashing or flooding the service. |
| CVE-2019-0247 | SAP Cloud Connector, before version 2.11.3, allows an attacker to inject code that can be executed by the application. An attacker could thereby control the behavior of the application. |
| CVE-2019-0246 | SAP Cloud Connector, before version 2.11.3, does not perform any authentication checks for functionalities that require user identity. |
| CVE-2018-9148 | Western Digital WD My Cloud v04.05.00-320 devices embed the session token (aka PHPSESSID) in filenames, which makes it easier for attackers to bypass authentication by listing a directory. NOTE: this can be exploited in conjunction with CVE-2018-7171 for remote authentication bypass within a product that uses My Cloud. |
| CVE-2018-9032 | An authentication bypass vulnerability on D-Link DIR-850L Wireless AC1200 Dual Band Gigabit Cloud Router (Hardware Version : A1, B1; Firmware Version : 1.02-2.06) devices potentially allows attackers to bypass SharePort Web Access Portal by directly visiting /category_view.php or /folder_view.php. |
| CVE-2018-8940 | ClientServiceConfigController.cs in Enghouse Cloud Contact Center Platform 7.2.5 has functionality for loading external XML files and parsing them, allowing an attacker to upload a malicious XML file and reference it in the URL of the application, forcing the application to load and parse the malicious XML file, aka an XXE issue. |
| CVE-2018-7580 | Philips Hue is vulnerable to a Denial of Service attack. Sending a SYN flood on port tcp/80 will freeze Philips Hue's hub and it will stop responding. The "hub" will stop operating and be frozen until the flood stops. During the flood, the user won't be able to turn on/off the lights, and all of the hub's functionality will be unresponsive. The cloud service also won't work with the hub. |
| CVE-2018-6499 | Remote Code Execution in the following products Hybrid Cloud Management Containerized Suite HCM2017.11, HCM2018.02, HCM2018.05, Operations Bridge Containerized Suite 2017.11, 2018.02, 2018.05, Data Center Automation Containerized Suite 2017.01 until 2018.05, Service Management Automation Suite 2017.11, 2018.02, 2018.05, Service Virtualization (SV) with floating licenses using Any version using APLS older than 10.7, Unified Functional Testing (UFT) with floating licenses using Any version using APLS older than 10.7, Network Virtualization (NV) with floating licenses using Any version using APLS older than 10.7 and Network Operations Management (NOM) Suite CDF 2017.11, 2018.02, 2018.05 will allow Remote Code Execution. |
| CVE-2018-6498 | Remote Code Execution in the following products Hybrid Cloud Management Containerized Suite HCM2017.11, HCM2018.02, HCM2018.05, Operations Bridge Containerized Suite 2017.11, 2018.02, 2018.05, Data Center Automation Containerized Suite 2017.01 until 2018.05, Service Management Automation Suite 2017.11, 2018.02, 2018.05 and Network Operations Management (NOM) Suite CDF 2017.11, 2018.02, 2018.05 will allow Remote Code Execution. |
| CVE-2018-6302 | Denial of service by blocking of new camera registration on the cloud server in Hanwha Techwin Smartcams |
| CVE-2018-6301 | Arbitrary camera access and monitoring via cloud in Hanwha Techwin Smartcams |
| CVE-2018-5985 | SQL Injection exists in the LiveCRM SaaS Cloud 1.0 component for Joomla! via an r=site/login&company_id= request. |
| CVE-2018-5560 | A reliance on a static, hard-coded credential in the design of the cloud-based storage system of Practecol's Guardzilla All-In-One Video Security System allows an attacker to view the private data of all users of the Guardzilla device. |
| CVE-2018-5540 | On F5 BIG-IP 13.0.0-13.0.1, 12.1.0-12.1.3.3, 11.6.0-11.6.3.1, or 11.5.1-11.5.6, Enterprise Manager 3.1.1, BIG-IQ Centralized Management 5.0.0-5.1.0, BIG-IQ Cloud and Orchestration 1.0.0, or F5 iWorkflow 2.1.0-2.3.0 the big3d process does not irrevocably minimize group privileges at start up. |
| CVE-2018-5516 | On F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.2, or 11.2.1-11.6.3.1, Enterprise Manager 3.1.1, BIG-IQ Centralized Management 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, or F5 iWorkflow 2.0.2-2.3.0, authenticated users granted TMOS Shell (tmsh) access can access objects on the file system which would normally be disallowed by tmsh restrictions. This allows for authenticated, low privileged attackers to exfiltrate objects on the file system which should not be allowed. |
| CVE-2018-5347 | Seagate Media Server in Seagate Personal Cloud has unauthenticated command injection in the uploadTelemetry and getLogs functions in views.py because .psp URLs are handled by the fastcgi.server component and shell metacharacters are mishandled. |
| CVE-2018-5281 | SonicWall SonicOS on Network Security Appliance (NSA) 2017 Q4 devices has XSS via the CFS Custom Category and Cloud AV DB Exclusion Settings screens. |
| CVE-2018-5003 | Adobe Creative Cloud Desktop Application before 4.5.5.342 (installer) has an insecure library loading (dll hijacking) vulnerability. Successful exploitation could lead to privilege escalation. |
| CVE-2018-4992 | Adobe Creative Cloud Desktop Application versions 4.4.1.298 and earlier have an exploitable Improper input validation vulnerability. Successful exploitation could lead to local privilege escalation. |
| CVE-2018-4991 | Adobe Creative Cloud Desktop Application versions 4.4.1.298 and earlier have an exploitable Improper certificate validation vulnerability. Successful exploitation could lead to a security bypass. |
| CVE-2018-4873 | Adobe Creative Cloud Desktop Application versions 4.4.1.298 and earlier have an exploitable Unquoted Search Path vulnerability. Successful exploitation could lead to local privilege escalation. |
| CVE-2018-3910 | An exploitable code execution vulnerability exists in the cloud OTA setup functionality of Yi Home Camera 27US 1.8.7.0D. A specially crafted SSID can cause a command injection, resulting in code execution. An attacker can cause a camera to connect to this SSID to trigger this vulnerability. Alternatively, an attacker can convince a user to connect their camera to this SSID. |
| CVE-2018-3829 | In Elastic Cloud Enterprise (ECE) versions prior to 1.1.4 it was discovered that a user could scale out allocators on new hosts with an invalid roles token. An attacker with access to the previous runner ID and IP address of the coordinator-host could add a allocator to an existing ECE install to gain access to other clusters data. |
| CVE-2018-3828 | Elastic Cloud Enterprise (ECE) versions prior to 1.1.4 contain an information exposure vulnerability. It was discovered that certain exception conditions would result in encryption keys, passwords, and other security sensitive headers being leaked to the allocator logs. An attacker with access to the logging cluster may obtain leaked credentials and perform authenticated actions using these credentials. |
| CVE-2018-3827 | A sensitive data disclosure flaw was found in the Elasticsearch repository-azure (formerly elasticsearch-cloud-azure) plugin. When the repository-azure plugin is set to log at TRACE level Azure credentials can be inadvertently logged. |
| CVE-2018-3825 | In Elastic Cloud Enterprise (ECE) versions prior to 1.1.4 a default master encryption key is used in the process of granting ZooKeeper access to Elasticsearch clusters. Unless explicitly overwritten, this master key is predictable across all ECE deployments. If an attacker can connect to ZooKeeper directly they would be able to access configuration information of other tenants if their cluster ID is known. |
| CVE-2018-3821 | Kibana versions after 5.1.1 and before 5.6.7 and 6.1.3 had a cross-site scripting (XSS) vulnerability in the tag cloud visualization that could allow an attacker to obtain sensitive information from or perform destructive actions on behalf of other Kibana users. |
| CVE-2018-2409 | Improper session management when using SAP Cloud Platform 2.0 (Connectivity Service and Cloud Connector). Under certain conditions, data of some other user may be shown or modified when using an application built on top of SAP Cloud Platform. |
| CVE-2018-1990 | IBM Cloud App Management V2018.2.0, V2018.4.0, and V2018.4.1 could allow an attacker to obtain sensitive configuration information using a specially crafted HTTP request. IBM X-Force ID: 154283. |
| CVE-2018-19442 | A Buffer Overflow in Network::AuthenticationClient::VerifySignature in /bin/astro in Neato Botvac Connected 2.2.0 allows a remote attacker to execute arbitrary code with root privileges via a crafted POST request to a vendors/neato/robots/[robot_serial]/messages Neato cloud URI on the nucleo.neatocloud.com web site (port 4443). |
| CVE-2018-19441 | An issue was discovered in Neato Botvac Connected 2.2.0. The GenerateRobotPassword function of the NeatoCrypto library generates insufficiently random numbers for robot secret_key values used for local and cloud authentication/authorization. If an attacker knows the serial number and is able to estimate the time of first provisioning of a robot, he is able to brute force the generated secret_key of the robot. This is because the entropy of the secret_key exclusively relies on these two values, due to not seeding the random generator and using several constant inputs for secret_key computation. Serial numbers are printed on the packaging and equal the MAC address of the robot. |
| CVE-2018-1943 | IBM Cloud Private 3.1.0 and 3.1.1 is vulnerable to HTTP HOST header injection, caused by improper validation of input. By persuading a victim to visit a specially-crafted Web page, a remote attacker could exploit this vulnerability to inject arbitrary HTTP headers, which will allow the attacker to conduct various attacks against the vulnerable system, including cross-site scripting, cache poisoning or session hijacking. IBM X-Force ID: 153385. |
| CVE-2018-1939 | IBM Cloud Private 3.1.1 could allow a remote attacker to conduct phishing attacks, using an open redirect attack. By persuading a victim to visit a specially-crafted Web site, a remote attacker could exploit this vulnerability to spoof the URL displayed to redirect a user to a malicious Web site that would appear to be trusted. This could allow the attacker to obtain highly sensitive information or conduct further attacks against the victim. IBM X-Force ID: 153319. |
| CVE-2018-1938 | IBM Cloud Private 3.1.1 could alllow a local user with administrator privileges to intercept highly sensitive unencrypted data. IBM X-Force ID: 153318. |
| CVE-2018-1937 | IBM Cloud Private 3.1.1 could alllow a local user with administrator privileges to intercept highly sensitive unencrypted data. IBM X-Force ID: 153317. |
| CVE-2018-18979 | An issue was discovered in the Ascensia Contour NEXT ONE application for Android before 2019-01-15. It has a statically coded initialization vector. Extraction of the initialization vector is necessary for deciphering communications between this application and the backend server. This, in combination with retrieving any user's encrypted data from the Ascensia cloud through another vulnerability, allows an attacker to obtain and modify any patient's medical information. |
| CVE-2018-18978 | An issue was discovered in the Ascensia Contour NEXT ONE application for Android before 2019-01-15. It has a statically coded encryption key. Extraction of the encryption key is necessary for deciphering communications between this application and the backend server. This, in combination with retrieving any user's encrypted data from the Ascensia cloud through another vulnerability, allows an attacker to obtain and modify any patient's medical information. |
| CVE-2018-18976 | An issue was discovered in the Ascensia Contour NEXT ONE application for iOS and Android before 2019-01-15. An attacker may retrieve encrypted medical information of any user of the Ascensia cloud platform by performing Direct Object References with a series of user ID values. (This information can be decrypted through a different vulnerability.) |
| CVE-2018-18602 | The Cloud API on Guardzilla smart cameras allows user enumeration, with resultant arbitrary camera access and monitoring. |
| CVE-2018-18601 | The TK_set_deviceModel_req_handle function in the cloud communication component in Guardzilla GZ621W devices with firmware 0.5.1.4 has a Buffer Overflow. |
| CVE-2018-1843 | The Identity and Access Management (IAM) services (IBM Cloud Private 3.1.0) do not use a secure channel, such as SSL, to exchange information only when accessed internally from within the cluster. It could be possible for an attacker with access to network traffic to sniff packets from the connection and uncover data. IBM X-Force ID: 150903 |
| CVE-2018-1841 | IBM Cloud Private 2.1.0 could allow a local user to obtain the CA Private Key due to it being world readable in boot/master node. IBM X-Force ID: 150901. |
| CVE-2018-1838 | IBM WebSphere Application Server 8.5 and 9.0 in IBM Cloud could allow a remote attacker to obtain sensitive information caused by improper handling of passwords. IBM X-Force ID: 150811. |
| CVE-2018-18369 | Norton Security (Windows client) prior to 22.16.3 and SEP SBE (Windows client) prior to Cloud Agent 3.00.31.2817, NIS-22.15.2.22 & SEP-12.1.7484.7002, may be susceptible to a DLL Preloading vulnerability, which is a type of issue that can occur when an application looks to call a DLL for execution and an attacker provides a malicious DLL to use instead. |
| CVE-2018-18366 | Symantec Norton Security prior to 22.16.3, SEP (Windows client) prior to and including 12.1 RU6 MP9, and prior to 14.2 RU1, SEP SBE prior to Cloud Agent 3.00.31.2817, NIS-22.15.2.22, SEP-12.1.7484.7002 and SEP Cloud prior to 22.16.3 may be susceptible to a kernel memory disclosure, which is a type of issue where a specially crafted IRP request can cause the driver to return uninitialized memory. |
| CVE-2018-18006 | Hardcoded credentials in the Ricoh myPrint application 2.9.2.4 for Windows and 2.2.7 for Android give access to any externally disclosed myPrint WSDL API, as demonstrated by discovering API secrets of related Google cloud printers, encrypted passwords of mail servers, and names of printed files. |
| CVE-2018-17954 | An Improper Privilege Management in crowbar of SUSE OpenStack Cloud 7, SUSE OpenStack Cloud 8, SUSE OpenStack Cloud 9, SUSE OpenStack Cloud Crowbar 8, SUSE OpenStack Cloud Crowbar 9 allows root users on any crowbar managed node to cause become root on any other node. This issue affects: SUSE OpenStack Cloud 7 crowbar-core versions prior to 4.0+git.1578392992.fabfd186c-9.63.1, crowbar-. SUSE OpenStack Cloud 8 ardana-cinder versions prior to 8.0+git.1579279939.ee7da88-3.39.3, ardana-. SUSE OpenStack Cloud 9 ardana-ansible versions prior to 9.0+git.1581611758.f694f7d-3.16.1, ardana-. SUSE OpenStack Cloud Crowbar 8 crowbar-core versions prior to 5.0+git.1582968668.1a55c77c5-3.35.4, crowbar-. SUSE OpenStack Cloud Crowbar 9 crowbar-core versions prior to 6.0+git.1582892022.cbd70e833-3.19.3, crowbar-. |
| CVE-2018-17919 | All versions of Hangzhou Xiongmai Technology Co., Ltd XMeye P2P Cloud Server may allow an attacker to use an undocumented user account "default" with its default password to login to XMeye and access/view video streams. |
| CVE-2018-17917 | All versions of Hangzhou Xiongmai Technology Co., Ltd XMeye P2P Cloud Server may allow an attacker to use MAC addresses to enumerate potential Cloud IDs. Using this ID, the attacker can discover and connect to valid devices using one of the supported apps. |
| CVE-2018-17915 | All versions of Hangzhou Xiongmai Technology Co., Ltd XMeye P2P Cloud Server do not encrypt all device communication. This includes the XMeye service and firmware update communication. This could allow an attacker to eavesdrop on video feeds, steal XMeye login credentials, or impersonate the update server with malicious update code. |
| CVE-2018-17153 | It was discovered that the Western Digital My Cloud device before 2.30.196 is affected by an authentication bypass vulnerability. An unauthenticated attacker can exploit this vulnerability to authenticate as an admin user without needing to provide a password, thereby gaining full control of the device. (Whenever an admin logs into My Cloud, a server-side session is created that is bound to the user's IP address. After the session is created, it is possible to call authenticated CGI modules by sending the cookie username=admin in the HTTP request. The invoked CGI will check if a valid session is present and bound to the user's IP address.) It was found that it is possible for an unauthenticated attacker to create a valid session without a login. The network_mgr.cgi CGI module contains a command called "cgi_get_ipv6" that starts an admin session -- tied to the IP address of the user making the request -- if the additional parameter "flag" with the value "1" is provided. Subsequent invocation of commands that would normally require admin privileges now succeed if an attacker sets the username=admin cookie. |
| CVE-2018-16477 | A bypass vulnerability in Active Storage >= 5.2.0 for Google Cloud Storage and Disk services allow an attacker to modify the `content-disposition` and `content-type` parameters which can be used in with HTML files and have them executed inline. Additionally, if combined with other techniques such as cookie bombing and specially crafted AppCache manifests, an attacker can gain access to private signed URLs within a specific storage path. This vulnerability has been fixed in version 5.2.1.1. |
| CVE-2018-1593 | IBM Multi-Cloud Data Encryption (MDE) 2.1 could allow an unauthorized user to manipulate data due to missing file checksums. IBM X-Force ID: 143568. |
| CVE-2018-15800 | Cloud Foundry Bits Service, versions prior to 2.18.0, includes an information disclosure vulnerability. A remote malicious user may execute a timing attack to brute-force the signing key, allowing them complete read and write access to the the Bits Service storage. |
| CVE-2018-15797 | Cloud Foundry NFS volume release, 1.2.x prior to 1.2.5, 1.5.x prior to 1.5.4, 1.7.x prior to 1.7.3, logs the cf admin username and password when running the nfsbrokerpush BOSH deploy errand. A remote authenticated user with access to BOSH can obtain the admin credentials for the Cloud Foundry Platform through the logs of the NFS volume deploy errand. |
| CVE-2018-15796 | Cloud Foundry Bits Service Release, versions prior to 2.14.0, uses an insecure hashing algorithm to sign URLs. A remote malicious user may obtain a signed URL and extract the signing key, allowing them complete read and write access to the the Bits Service storage. |
| CVE-2018-15761 | Cloud Foundry UAA release, versions prior to v64.0, and UAA, versions prior to 4.23.0, contains a validation error which allows for privilege escalation. A remote authenticated user may modify the url and content of a consent page to gain a token with arbitrary scopes that escalates their privileges. |
| CVE-2018-15759 | Pivotal Cloud Foundry On Demand Services SDK, versions prior to 0.24 contain an insecure method of verifying credentials. A remote unauthenticated malicious user may make many requests to the service broker with different credentials, allowing them to infer valid credentials and gain access to perform broker operations. |
| CVE-2018-15755 | Cloud Foundry CF Networking Release, versions 2.11.0 prior to 2.16.0, contain an internal api endpoint vulnerable to SQL injection between Diego cells and the policy server. A remote authenticated malicious user with mTLS certs can issue arbitrary SQL queries and gain access to the policy server. |
| CVE-2018-15754 | Cloud Foundry UAA, versions 60 prior to 66.0, contain an authorization logic error. In environments with multiple identity providers that contain accounts across identity providers with the same username, a remote authenticated user with access to one of these accounts may be able to obtain a token for an account of the same username in the other identity provider. |
| CVE-2018-15480 | An issue was discovered in myStrom WiFi Switch V1 before 2.66, WiFi Switch V2 before 3.80, WiFi Switch EU before 3.80, WiFi Bulb before 2.58, WiFi LED Strip before 3.80, WiFi Button before 2.73, and WiFi Button Plus before 2.73. The cloud API had a hidden parameter, which allowed an authenticated user to reconfigure the server URL for a device registered to their account. In combination with an insecure device registration vulnerability, this allowed an attacker to reconfigure a maliciously registered device to their own rogue replica of the myStrom API and issue commands to the device, including firmware update commands. |
| CVE-2018-15479 | An issue was discovered in myStrom WiFi Switch V1 before 2.66, WiFi Switch V2 before 3.80, WiFi Switch EU before 3.80, WiFi Bulb before 2.58, WiFi LED Strip before 3.80, WiFi Button before 2.73, and WiFi Button Plus before 2.73. Devices did not authenticate themselves to the cloud in device to cloud communication. This lack of device authentication allowed an attacker to impersonate any device by guessing or learning their MAC address. |
| CVE-2018-15478 | An issue was discovered in myStrom WiFi Switch V1 before 2.66, WiFi Switch V2 before 3.80, WiFi Switch EU before 3.80, WiFi Bulb before 2.58, WiFi LED Strip before 3.80, WiFi Button before 2.73, and WiFi Button Plus before 2.73. The process of registering a device with a cloud account was based on an activation code derived from the device MAC address. By guessing valid MAC addresses or using MAC addresses printed on devices in shops and reverse engineering the protocol, an attacker would have been able to register previously unregistered devices to their account. When the rightful owner would have connected them after purchase to their WiFi network, the devices would not have registered with their account, would subsequently not have been controllable from the owner's mobile app, and would not have been visible in the owner's account. Instead, they would have been under control of the attacker. |
| CVE-2018-15477 | myStrom WiFi Switch V1 devices before 2.66 did not sanitize a parameter received from the cloud that was used in an OS command. Malicious servers were able to run operating system commands on the device. |
| CVE-2018-15476 | An issue was discovered in myStrom WiFi Switch V1 before 2.66, WiFi Switch V2 before 3.80, WiFi Switch EU before 3.80, WiFi Bulb before 2.58, WiFi LED Strip before 3.80, WiFi Button before 2.73, and WiFi Button Plus before 2.73. The SSL/TLS server certificate in the device to cloud communication was not verified by the device. As a result, an attacker in control of the network traffic of a device could have taken control of a device by intercepting and modifying commands issued from the server to the device in a Man-in-the-Middle attack. This included the ability to inject firmware update commands into the communication and cause the device to install maliciously modified firmware. |
| CVE-2018-15400 | A vulnerability in the web-based management interface of Cisco Cloud Services Platform 2100 could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by persuading a user of the interface to click a malicious link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive, browser-based information. |
| CVE-2018-15322 | On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.7, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.2.1-11.5.6, BIG-IQ Centralized Management 6.0.0-6.0.1, 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, iWorkflow 2.0.1-2.3.0, or Enterprise Manager 3.1.1 a BIG-IP user granted with tmsh access may cause the BIG-IP system to experience denial-of-service (DoS) when the BIG-IP user uses the tmsh utility to run the edit cli preference command and proceeds to save the changes to another filename repeatedly. This action utilises storage space on the /var partition and when performed repeatedly causes the /var partition to be full. |
| CVE-2018-15321 | When BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.2.1-11.5.6, BIG-IQ Centralized Management 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, iWorkflow 2.1.0-2.3.0, or Enterprise Manager 3.1.1 is licensed for Appliance Mode, Admin and Resource administrator roles can by-pass BIG-IP Appliance Mode restrictions to overwrite critical system files. Attackers of high privilege level are able to overwrite critical system files which bypasses security controls in place to limit TMSH commands. This is possible with an administrator or resource administrator roles when granted TMSH. Resource administrator roles must have TMSH access in order to perform this attack. |
| CVE-2018-14417 | A command injection vulnerability was found in the web administration console in SoftNAS Cloud before 4.0.3. In particular, the snserv script did not sanitize the 'recentVersion' parameter from the snserv endpoint, allowing an unauthenticated attacker to execute arbitrary commands with root permissions. |
| CVE-2018-13850 | The "Firebase Cloud Messaging (FCM) + Advance Admin Panel" component supporting Firebase Push Notification on iOS (through 2017-10-26) allows SQL injection via the /advance_push/public/login username parameter. |
| CVE-2018-13412 | An issue was discovered in the Self Service Portal in Zoho ManageEngine Desktop Central before 10.0.282. A clickable company logo in a window running as SYSTEM can be abused to escalate privileges. In cloud, the issue is fixed in 10.0.470 agent version. |
| CVE-2018-13411 | An issue was discovered in Zoho ManageEngine Desktop Central before 10.0.282. A clickable company logo in a window running as SYSTEM can be abused to escalate privileges. In cloud, the issue is fixed in 10.0.470 agent version. |
| CVE-2018-12907 | In Rclone 1.42, use of "rclone sync" to migrate data between two Google Cloud Storage buckets might allow attackers to trigger the transmission of any URL's content to Google, because there is no validation of a URL field received from the Google Cloud Storage API server, aka a "RESTLESS" issue. |
| CVE-2018-12829 | Adobe Creative Cloud Desktop Application before 4.6.1 has an improper certificate validation vulnerability. Successful exploitation could lead to privilege escalation. |
| CVE-2018-1277 | Cloud Foundry Garden-runC, versions prior to 1.13.0, does not correctly enforce disc quotas for Docker image layers. A remote authenticated user may push an app with a malicious Docker image that will consume more space on a Diego cell than allocated in their quota, potentially causing a DoS against the cell. |
| CVE-2018-1269 | Cloud Foundry Loggregator, versions 89.x prior to 89.5 or 96.x prior to 96.1 or 99.x prior to 99.1 or 101.x prior to 101.9 or 102.x prior to 102.2, does not handle errors thrown while constructing certain http requests. A remote authenticated user may construct malicious requests to cause the traffic controller to leave dangling TCP connections, which could cause denial of service. |
| CVE-2018-1268 | Cloud Foundry Loggregator, versions 89.x prior to 89.5 or 96.x prior to 96.1 or 99.x prior to 99.1 or 101.x prior to 101.9 or 102.x prior to 102.2, does not validate app GUID structure in requests. A remote authenticated malicious user knowing the GUID of an app may construct malicious requests to read from or write to the logs of that app. |
| CVE-2018-1267 | Cloud Foundry Silk CNI plugin, versions prior to 0.2.0, contains an improper access control vulnerability. If the platform is configured with an application security group (ASG) that overlaps with the Silk overlay network, any applications can reach any other application on the network regardless of the configured routing policies. |
| CVE-2018-1266 | Cloud Foundry Cloud Controller, versions prior to 1.52.0, contains information disclosure and path traversal vulnerabilities. An authenticated malicious user can predict the location of application blobs and leverage path traversal to create a malicious application that has the ability to overwrite arbitrary files on the Cloud Controller instance. |
| CVE-2018-1265 | Cloud Foundry Diego, release versions prior to 2.8.0, does not properly sanitize file paths in tar and zip files headers. A remote attacker with CF admin privileges can upload a malicious buildpack that will allow a complete takeover of a Diego Cell VM and access to all apps running on that Diego Cell. |
| CVE-2018-1264 | Cloud Foundry Log Cache, versions prior to 1.1.1, logs its UAA client secret on startup as part of its envstruct report. A remote attacker who has gained access to the Log Cache VM can read this secret, gaining all privileges held by the Log Cache UAA client. In the worst case, if this client is an admin, the attacker would gain complete control over the Foundation. |
| CVE-2018-1262 | Cloud Foundry Foundation UAA, versions 4.12.X and 4.13.X, introduced a feature which could allow privilege escalation across identity zones for clients performing offline validation. A zone administrator could configure their zone to issue tokens which impersonate another zone, granting up to admin privileges in the impersonated zone for clients performing offline token validation. |
| CVE-2018-1256 | Spring Cloud SSO Connector, version 2.1.2, contains a regression which disables issuer validation in resource servers that are not bound to the SSO service. In PCF deployments with multiple SSO service plans, a remote attacker can authenticate to unbound resource servers which use this version of the SSO Connector with tokens generated from another service plan. |
| CVE-2018-1231 | Cloud Foundry BOSH CLI, versions prior to v3.0.1, contains an improper access control vulnerability. A user with access to an instance using the BOSH CLI can access the BOSH CLI configuration file and use its contents to perform authenticated requests to BOSH. |
| CVE-2018-12239 | Norton prior to 22.15; Symantec Endpoint Protection (SEP) prior to 12.1.7454.7000 & 14.2; Symantec Endpoint Protection Small Business Edition (SEP SBE) prior to NIS-22.15.1.8 & SEP-12.1.7454.7000; and Symantec Endpoint Protection Cloud (SEP Cloud) prior to 22.15.1 may be susceptible to an AV bypass issue, which is a type of exploit that works to circumvent one of the virus detection engines to avoid a specific type of virus protection. One of the antivirus engines depends on a signature pattern from a database to identify malicious files and viruses; the antivirus bypass exploit looks to alter the file being scanned so it is not detected. |
| CVE-2018-12238 | Norton prior to 22.15; Symantec Endpoint Protection (SEP) prior to 12.1.7454.7000 & 14.2; Symantec Endpoint Protection Small Business Edition (SEP SBE) prior to NIS-22.15.1.8 & SEP-12.1.7454.7000; and Symantec Endpoint Protection Cloud (SEP Cloud) prior to 22.15.1 may be susceptible to an AV bypass issue, which is a type of exploit that works to circumvent one of the virus detection engines to avoid a specific type of virus protection. One of the antivirus engines depends on a signature pattern from a database to identify malicious files and viruses; the antivirus bypass exploit looks to alter the file being scanned so it is not detected. |
| CVE-2018-1223 | Cloud Foundry Container Runtime (kubo-release), versions prior to 0.14.0, may leak UAA and vCenter credentials to application logs. A malicious user with the ability to read the application logs could use these credentials to escalate privileges. |
| CVE-2018-1221 | In cf-deployment before 1.14.0 and routing-release before 0.172.0, the Cloud Foundry Gorouter mishandles WebSocket requests for AWS Application Load Balancers (ALBs) and some other HTTP-aware Load Balancers. A user with developer privileges could use this vulnerability to steal data or cause denial of service. |
| CVE-2018-12072 | An issue was discovered in Cloud Media Popcorn A-200 03-05-130708-21-POP-411-000 firmware. It is configured to provide TELNET remote access (without a password) that pops a shell as root. If an attacker can connect to port 23 on the device, he can completely compromise it. |
| CVE-2018-1198 | Pivotal Cloud Cache, versions prior to 1.3.1, prints a superuser password in plain text during BOSH deployment logs. A malicious user with access to the logs could escalate their privileges using this password. |
| CVE-2018-1197 | In Windows Stemcells versions prior to 1200.14, apps running inside containers in Windows on Google Cloud Platform are able to access the metadata endpoint. A malicious developer could use this access to gain privileged credentials. |
| CVE-2018-1195 | In Cloud Controller versions prior to 1.46.0, cf-deployment versions prior to 1.3.0, and cf-release versions prior to 283, Cloud Controller accepts refresh tokens for authentication where access tokens are expected. This exposes a vulnerability where a refresh token that would otherwise be insufficient to obtain an access token, either due to lack of client credentials or revocation, would allow authentication. |
| CVE-2018-1193 | Cloud Foundry routing-release, versions prior to 0.175.0, lacks sanitization for user-provided X-Forwarded-Proto headers. A remote user can set the X-Forwarded-Proto header in a request to potentially bypass an application requirement to only respond over secure connections. |
| CVE-2018-1192 | In Cloud Foundry Foundation cf-release versions prior to v285; cf-deployment versions prior to v1.7; UAA 4.5.x versions prior to 4.5.5, 4.8.x versions prior to 4.8.3, and 4.7.x versions prior to 4.7.4; and UAA-release 45.7.x versions prior to 45.7, 52.7.x versions prior to 52.7, and 53.3.x versions prior to 53.3, the SessionID is logged in audit event logs. An attacker can use the SessionID to impersonate a logged-in user. |
| CVE-2018-1191 | Cloud Foundry Garden-runC, versions prior to 1.11.0, contains an information exposure vulnerability. A user with access to Garden logs may be able to obtain leaked credentials and perform authenticated actions using those credentials. |
| CVE-2018-1190 | An issue was discovered in these Pivotal Cloud Foundry products: all versions prior to cf-release v270, UAA v3.x prior to v3.20.2, and UAA bosh v30.x versions prior to v30.8 and all other versions prior to v45.0. A cross-site scripting (XSS) attack is possible in the clientId parameter of a request to the UAA OpenID Connect check session iframe endpoint used for single logout session management. |
| CVE-2018-11180 | Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 38 of 46). |
| CVE-2018-11084 | Cloud Foundry Garden-runC release, versions prior to 1.16.1, prevents deletion of some app environments based on file attributes. A remote authenticated malicious user may create and delete apps with crafted file attributes to cause a denial of service for new app instances or scaling up of existing apps. |
| CVE-2018-11083 | Cloud Foundry BOSH, versions v264 prior to v264.14.0 and v265 prior to v265.7.0 and v266 prior to v266.8.0 and v267 prior to v267.2.0, allows refresh tokens to be as access tokens when using UAA for authentication. A remote attacker with an admin refresh token given by UAA can be used to access BOSH resources without obtaining an access token, even if their user no longer has access to those resources. |
| CVE-2018-11082 | Cloud Foundry UAA, all versions prior to 4.20.0 and Cloud Foundry UAA Release, all versions prior to 61.0, allows brute forcing of MFA codes. A remote unauthenticated malicious user in possession of a valid username and password can brute force MFA to login as the targeted user. |
| CVE-2018-11047 | Cloud Foundry UAA, versions 4.19 prior to 4.19.2 and 4.12 prior to 4.12.4 and 4.10 prior to 4.10.2 and 4.7 prior to 4.7.6 and 4.5 prior to 4.5.7, incorrectly authorizes requests to admin endpoints by accepting a valid refresh token in lieu of an access token. Refresh tokens by design have a longer expiration time than access tokens, allowing the possessor of a refresh token to authenticate longer than expected. This affects the administrative endpoints of the UAA. i.e. /Users, /Groups, etc. However, if the user has been deleted or had groups removed, or the client was deleted, the refresh token will no longer be valid. |
| CVE-2018-11041 | Cloud Foundry UAA, versions later than 4.6.0 and prior to 4.19.0 except 4.10.1 and 4.7.5 and uaa-release versions later than v48 and prior to v60 except v55.1 and v52.9, does not validate redirect URL values on a form parameter used for internal UAA redirects on the login page, allowing open redirects. A remote attacker can craft a malicious link that, when clicked, will redirect users to arbitrary websites after a successful login attempt. |
| CVE-2018-10896 | The default cloud-init configuration, in cloud-init 0.6.2 and newer, included "ssh_deletekeys: 0", disabling cloud-init's deletion of ssh host keys. In some environments, this could lead to instances created by cloning a golden master or template system, sharing ssh host keys, and being able to impersonate one another or conduct man-in-the-middle attacks. |
| CVE-2018-1000603 | A exposure of sensitive information vulnerability exists in Jenkins Openstack Cloud Plugin 2.35 and earlier in BootSource.java, InstancesToRun.java, JCloudsCleanupThread.java, JCloudsCloud.java, JCloudsComputer.java, JCloudsPreCreationThread.java, JCloudsRetentionStrategy.java, JCloudsSlave.java, JCloudsSlaveTemplate.java, LauncherFactory.java, OpenstackCredentials.java, OpenStackMachineStep.java, SlaveOptions.java, SlaveOptionsDescriptor.java that allows attackers with Overall/Read access to Jenkins to connect to an attacker-specified URL using attacker-specified credentials IDs obtained through another method, capturing credentials stored in Jenkins, and to cause Jenkins to submit HTTP requests to attacker-specified URLs. |
| CVE-2018-1000534 | Joplin version prior to 1.0.90 contains a XSS evolving into code execution due to enabled nodeIntegration for that particular BrowserWindow instance where XSS was identified from vulnerability in Note content field - information on the fix can be found here https://github.com/laurent22/joplin/commit/494e235e18659574f836f84fcf9f4d4fcdcfcf89 that can result in executing unauthorized code within the rights in which the application is running. This attack appear to be exploitable via Victim synchronizing notes from the cloud services or other note-keeping services which contain malicious code. This vulnerability appears to have been fixed in 1.0.90 and later. |
| CVE-2018-0454 | A vulnerability in the web-based management interface of Cisco Cloud Services Platform 2100 could allow an authenticated, remote attacker to perform command injection. The vulnerability is due to insufficient input validation of command input. An attacker could exploit this vulnerability by sending customized commands to the web-based management interface. |
| CVE-2018-0394 | A vulnerability in the web upload function of Cisco Cloud Services Platform 2100 could allow an authenticated, remote attacker to obtain restricted shell access on an affected system. The vulnerability is due to insufficient input validation of parameters passed to a specific function within the user interface. An attacker could exploit this vulnerability by injecting code into a function parameter. Cisco Bug IDs: CSCvi12935. |
| CVE-2018-0351 | A vulnerability in the command-line tcpdump utility in the Cisco SD-WAN Solution could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the tcpdump utility. The attacker must be authenticated to access the tcpdump utility. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69751. |
| CVE-2018-0350 | A vulnerability in the VPN subsystem configuration in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected parameter in a web page. The attacker must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69808, CSCvi69810, CSCvi69814, CSCvi69822, CSCvi69827, CSCvi69828, CSCvi69836. |
| CVE-2018-0349 | A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the request admin-tech command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the request admin-tech command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69852, CSCvi69856. |
| CVE-2018-0348 | A vulnerability in the CLI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the load command within the VPN subsystem. The attacker must be authenticated to access the affected CLI parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69866. |
| CVE-2018-0344 | A vulnerability in the vManage dashboard for the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69974. |
| CVE-2018-0343 | A vulnerability in the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary code with vmanage user privileges or cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient access restrictions to the HTTP management interface of the affected solution. An attacker could exploit this vulnerability by sending a malicious HTTP request to the affected management service through an authenticated device. A successful exploit could allow the attacker to execute arbitrary code with vmanage user privileges or stop HTTP services on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69976. |
| CVE-2018-0342 | A vulnerability in the configuration and monitoring service of the Cisco SD-WAN Solution could allow an authenticated, local attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete bounds checks for data that is provided by the configuration and monitoring service of the affected solution. An attacker could exploit this vulnerability by sending malicious data to the vDaemon listening service on an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected device, which could allow the attacker to execute arbitrary code with root privileges on the device or cause the vDaemon listening service to reload and result in a DoS condition on the device. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi70003. |
| CVE-2018-0331 | A vulnerability in the Cisco Discovery Protocol (formerly known as CDP) subsystem of devices running, or based on, Cisco NX-OS Software contain a vulnerability that could allow an unauthenticated, adjacent attacker to create a denial of service (DoS) condition. The vulnerability is due to a failure to properly validate certain fields within a Cisco Discovery Protocol message prior to processing it. An attacker with the ability to submit a Cisco Discovery Protocol message designed to trigger the issue could cause a DoS condition on an affected device while the device restarts. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc89242, CSCve40943, CSCve40953, CSCve40965, CSCve40970, CSCve40978, CSCve40992, CSCve41000, CSCve41007. |
| CVE-2018-0306 | A vulnerability in the CLI parser of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device. Note: This vulnerability requires that any feature license is uploaded to the device. The vulnerability does not require that the license be used. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51693, CSCve91634, CSCve91659, CSCve91663. |
| CVE-2018-0303 | A vulnerability in the Cisco Discovery Protocol component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on the affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2 adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. This vulnerability affects the following if configured to use Cisco Discovery Protocol: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc22202, CSCvc22205, CSCvc22208, CSCvc88078, CSCvc88150, CSCvc88159, CSCvc88162, CSCvc88167. |
| CVE-2018-0296 | A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. It is also possible on certain software releases that the ASA will not reload, but an attacker could view sensitive system information without authentication by using directory traversal techniques. The vulnerability is due to lack of proper input validation of the HTTP URL. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition or unauthenticated disclosure of information. This vulnerability applies to IPv4 and IPv6 HTTP traffic. This vulnerability affects Cisco ASA Software and Cisco Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 1000V Cloud Firewall, ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvi16029. |
| CVE-2018-0294 | A vulnerability in the write-erase feature of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to configure an unauthorized administrator account for an affected device. The vulnerability exists because the affected software does not properly delete sensitive files when certain CLI commands are used to clear the device configuration and reload a device. An attacker could exploit this vulnerability by logging into an affected device as an administrative user and configuring an unauthorized account for the device. The account would not require a password for authentication and would be accessible only via a Secure Shell (SSH) connection to the device. A successful exploit could allow the attacker to configure an unauthorized account that has administrative privileges, does not require a password for authentication, and does not appear in the running configuration or the audit logs for the affected device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3500 Platform Switches, Nexus 4000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd13993, CSCvd34845, CSCvd34857, CSCvd34862, CSCvd34879, CSCve35753. |
| CVE-2018-0208 | A vulnerability in the web-based management interface of the (cloud based) Cisco Registered Envelope Service could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of the affected service. The vulnerability is due to insufficient validation of user-supplied input that is processed by the web-based management interface of the affected service. An attacker could exploit this vulnerability by persuading a user of the interface to click a malicious link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive browser-based information. Cisco Bug IDs: CSCvg74126. |
| CVE-2018-0164 | A vulnerability in the Switch Integrated Security Features of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an interface queue wedge. The vulnerability is due to incorrect handling of crafted IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv6 packets through the device. An exploit could allow the attacker to cause an interface queue wedge. This vulnerability affects the Cisco cBR-8 Converged Broadband Router, Cisco ASR 1000 Series Aggregation Services Routers, and Cisco Cloud Services Router 1000V Series when configured with IPv6. In the field and internal testing, this vulnerability was only observed or reproduced on the Cisco cBR-8 Converged Broadband Router. The Cisco ASR 1000 Series Aggregation Services Routers and Cisco Cloud Services Router 1000V Series contain the same code logic, so affected trains have had the code fix applied; however, on these two products, the vulnerability has not been observed in the field or successfully reproduced internally. Cisco Bug IDs: CSCvd75185. |
| CVE-2018-0101 | A vulnerability in the Secure Sockets Layer (SSL) VPN functionality of the Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause a reload of the affected system or to remotely execute code. The vulnerability is due to an attempt to double free a region of memory when the webvpn feature is enabled on the Cisco ASA device. An attacker could exploit this vulnerability by sending multiple, crafted XML packets to a webvpn-configured interface on the affected system. An exploit could allow the attacker to execute arbitrary code and obtain full control of the system, or cause a reload of the affected device. This vulnerability affects Cisco ASA Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, Firepower Threat Defense Software (FTD). Cisco Bug IDs: CSCvg35618. |
| CVE-2017-8944 | A Remote Disclosure of Information vulnerability in HPE Cloud Optimizer version v3.0x was found. |
| CVE-2017-8777 | Open-Xchange GmbH OX Cloud Plugins 1.4.0 and earlier is affected by: Missing Authorization. |
| CVE-2017-8444 | The client-forwarder in Elastic Cloud Enterprise versions prior to 1.0.2 do not properly encrypt traffic to ZooKeeper. If an attacker is able to man in the middle (MITM) the traffic between the client-forwarder and ZooKeeper they could potentially obtain sensitive data. |
| CVE-2017-8228 | Amcrest IPM-721S V2.420.AC00.16.R.20160909 devices mishandle reboots within the past two hours. Amcrest cloud services does not perform a thorough verification when allowing the user to add a new camera to the user's account to ensure that the user actually owns the camera other than knowing the serial number of the camera. This can allow an attacker who knows the serial number to easily add another user's camera to an attacker's cloud account and control it completely. This is possible in case of any camera that is currently not a part of an Amcrest cloud account or has been removed from the user's cloud account. Also, another requirement for a successful attack is that the user should have rebooted the camera in the last two hours. However, both of these conditions are very likely for new cameras that are sold over the Internet at many ecommerce websites or vendors that sell the Amcrest products. The successful attack results in an attacker being able to completely control the camera which includes being able to view and listen on what the camera can see, being able to change the motion detection settings and also be able to turn the camera off without the user being aware of it. Note: The same attack can be executed using the Amcrest Cloud mobile application. |
| CVE-2017-8221 | Wireless IP Camera (P2P) WIFICAM devices rely on a cleartext UDP tunnel protocol (aka the Cloud feature) for communication between an Android application and a camera device, which allows remote attackers to obtain sensitive information by sniffing the network. |
| CVE-2017-8048 | In Cloud Foundry capi-release versions 1.33.0 and later, prior to 1.42.0 and cf-release versions 268 and later, prior to 274, the original fix for CVE-2017-8033 introduces an API regression that allows a space developer to execute arbitrary code on the Cloud Controller VM by pushing a specially crafted application. NOTE: 274 resolves the vulnerability but has a serious bug that is fixed in 275. |
| CVE-2017-8047 | In Cloud Foundry router routing-release all versions prior to v0.163.0 and cf-release all versions prior to v274, in some applications, it is possible to append a combination of characters to the URL that will allow for an open redirect. An attacker could exploit this as a phishing attack to gain access to user credentials or other sensitive data. NOTE: 274 resolves the vulnerability but has a serious bug that is fixed in 275. |
| CVE-2017-8041 | In Single Sign-On for Pivotal Cloud Foundry (PCF) 1.3.x versions prior to 1.3.4 and 1.4.x versions prior to 1.4.3, a user can execute a XSS attack on certain Single Sign-On service UI pages by inputting code in the text field for an organization name. |
| CVE-2017-8040 | In Single Sign-On for Pivotal Cloud Foundry (PCF) 1.3.x versions prior to 1.3.4 and 1.4.x versions prior to 1.4.3, an XXE (XML External Entity) attack was discovered in the Single Sign-On service dashboard. Privileged users can in some cases upload malformed XML leading to exposure of data on the Single Sign-On service broker file system. |
| CVE-2017-8038 | In Cloud Foundry Foundation Credhub-release version 1.1.0, access control lists (ACLs) enforce whether an authenticated user can perform an operation on a credential. For installations using ACLs, the ACL was bypassed for the CredHub interpolate endpoint, allowing authenticated applications to view any credential within the CredHub installation. |
| CVE-2017-8037 | In Cloud Foundry Foundation CAPI-release versions after v1.6.0 and prior to v1.38.0 and cf-release versions after v244 and prior to v270, there is an incomplete fix for CVE-2017-8035. If you took steps to remediate CVE-2017-8035 you should also upgrade to fix this CVE. A carefully crafted CAPI request from a Space Developer can allow them to gain access to files on the Cloud Controller VM for that installation, aka an Information Leak / Disclosure. |
| CVE-2017-8036 | An issue was discovered in the Cloud Controller API in Cloud Foundry Foundation CAPI-release version 1.33.0 (only). The original fix for CVE-2017-8033 included in CAPI-release 1.33.0 introduces a regression that allows a space developer to execute arbitrary code on the Cloud Controller VM by pushing a specially crafted application. |
| CVE-2017-8035 | An issue was discovered in the Cloud Controller API in Cloud Foundry Foundation CAPI-release versions after v1.6.0 and prior to v1.35.0 and cf-release versions after v244 and prior to v268. A carefully crafted CAPI request from a Space Developer can allow them to gain access to files on the Cloud Controller VM for that installation. |
| CVE-2017-8034 | The Cloud Controller and Router in Cloud Foundry (CAPI-release capi versions prior to v1.32.0, Routing-release versions prior to v0.159.0, CF-release versions prior to v267) do not validate the issuer on JSON Web Tokens (JWTs) from UAA. With certain multi-zone UAA configurations, zone administrators are able to escalate their privileges. |
| CVE-2017-8033 | An issue was discovered in the Cloud Controller API in Cloud Foundry Foundation CAPI-release versions prior to v1.35.0 and cf-release versions prior to v268. A filesystem traversal vulnerability exists in the Cloud Controller that allows a space developer to escalate privileges by pushing a specially crafted application that can write arbitrary files to the Cloud Controller VM. |
| CVE-2017-8032 | In Cloud Foundry cf-release versions prior to v264; UAA release all versions of UAA v2.x.x, 3.6.x versions prior to v3.6.13, 3.9.x versions prior to v3.9.15, 3.20.x versions prior to v3.20.0, and other versions prior to v4.4.0; and UAA bosh release (uaa-release) 13.x versions prior to v13.17, 24.x versions prior to v24.12. 30.x versions prior to 30.5, and other versions prior to v41, zone administrators are allowed to escalate their privileges when mapping permissions for an external provider. |
| CVE-2017-8031 | An issue was discovered in Cloud Foundry Foundation cf-release (all versions prior to v279) and UAA (30.x versions prior to 30.6, 45.x versions prior to 45.4, 52.x versions prior to 52.1). In some cases, the UAA allows an authenticated user for a particular client to revoke client tokens for other users on the same client. This occurs only if the client is using opaque tokens or JWT tokens validated using the check_token endpoint. A malicious actor could cause denial of service. |
| CVE-2017-8021 | EMC Elastic Cloud Storage (ECS) before 3.1 is affected by an undocumented account vulnerability that could potentially be leveraged by malicious users to compromise the affected system. |
| CVE-2017-7510 | In ovirt-engine 4.1, if a host was provisioned with cloud-init, the root password could be revealed through the REST interface. |
| CVE-2017-7497 | The dialog for creating cloud volumes (cinder provider) in CloudForms does not filter cloud tenants by user. An attacker with the ability to create storage volumes could use this to create storage volumes for any other tenant. |
| CVE-2017-7296 | An issue was discovered in Contiki Operating System 3.0. A Persistent XSS vulnerability is present in the MQTT/IBM Cloud Config page (aka mqtt.html) of cc26xx-web-demo. The cc26xx-web-demo features a webserver that runs on a constrained device. That particular page allows a user to remotely configure that device's operation by sending HTTP POST requests. The vulnerability consists of improper input sanitisation of the text fields on the MQTT/IBM Cloud config page, allowing for JavaScript code injection. |
| CVE-2017-7147 | An issue was discovered in certain Apple products. The Apple Support app before 1.2 for iOS is affected. The issue involves the "Analytics" component. It allows remote attackers to obtain sensitive analytics information by leveraging its presence in a cleartext HTTP transmission to an Adobe Marketing Cloud server operated for Apple, as demonstrated by information about the installation date and time. |
| CVE-2017-6610 | A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685. |
| CVE-2017-6609 | A vulnerability in the IPsec code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of malformed IPsec packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. An attacker needs to establish a valid IPsec tunnel before exploiting this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.8) 9.2(4.15) 9.4(4) 9.5(3.2) 9.6(2). Cisco Bug IDs: CSCun16158. |
| CVE-2017-6608 | A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243. |
| CVE-2017-6607 | A vulnerability in the DNS code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause an affected device to reload or corrupt the information present in the device's local DNS cache. The vulnerability is due to a flaw in handling crafted DNS response messages. An attacker could exploit this vulnerability by triggering a DNS request from the Cisco ASA Software and replying with a crafted response. A successful exploit could cause the device to reload, resulting in a denial of service (DoS) condition or corruption of the local DNS cache information. Note: Only traffic directed to the affected device can be used to exploit this vulnerability. This vulnerability affects Cisco ASA Software configured in routed or transparent firewall mode and single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.12) 9.2(4.18) 9.4(3.12) 9.5(3.2) 9.6(2.2). Cisco Bug IDs: CSCvb40898. |
| CVE-2017-6403 | An issue was discovered in Veritas NetBackup Before 8.0 and NetBackup Appliance Before 3.0. NetBackup Cloud Storage Service uses a hardcoded username and password. |
| CVE-2017-6131 | In some circumstances, an F5 BIG-IP version 12.0.0 to 12.1.2 and 13.0.0 Azure cloud instance may contain a default administrative password which could be used to remotely log into the BIG-IP system. The impacted administrative account is the Azure instance administrative user that was created at deployment. The root and admin accounts are not vulnerable. An attacker may be able to remotely access the BIG-IP host via SSH. |
| CVE-2017-4994 | An issue was discovered in Cloud Foundry Foundation cf-release versions prior to v263; UAA release 2.x versions prior to v2.7.4.18, 3.6.x versions prior to v3.6.12, 3.9.x versions prior to v3.9.14, and other versions prior to v4.3.0; and UAA bosh release (uaa-release) 13.x versions prior to v13.16, 24.x versions prior to v24.11, 30.x versions prior to 30.4, and other versions prior to v40. There was an issue with forwarded http headers in UAA that could result in account corruption. |
| CVE-2017-4992 | An issue was discovered in Cloud Foundry Foundation cf-release versions prior to v261; UAA release 2.x versions prior to v2.7.4.17, 3.6.x versions prior to v3.6.11, 3.9.x versions prior to v3.9.13, and other versions prior to v4.2.0; and UAA bosh release (uaa-release) 13.x versions prior to v13.15, 24.x versions prior to v24.10, 30.x versions prior to 30.3, and other versions prior to v37. There is privilege escalation (arbitrary password reset) with user invitations. |
| CVE-2017-4991 | An issue was discovered in Cloud Foundry Foundation cf-release versions prior to v260; UAA release 2.x versions prior to v2.7.4.16, 3.6.x versions prior to v3.6.10, 3.9.x versions prior to v3.9.12, and other versions prior to v3.17.0; and UAA bosh release (uaa-release) 13.x versions prior to v13.14, 24.x versions prior to v24.9, 30.x versions prior to 30.2, and other versions prior to v36. Privileged users in one zone are allowed to perform a password reset for users in a different zone. |
| CVE-2017-4974 | An issue was discovered in Cloud Foundry Foundation cf-release versions prior to v258; UAA release 2.x versions prior to v2.7.4.15, 3.6.x versions prior to v3.6.9, 3.9.x versions prior to v3.9.11, and other versions prior to v3.16.0; and UAA bosh release (uaa-release) 13.x versions prior to v13.13, 24.x versions prior to v24.8, and other versions prior to v30.1. An authorized user can use a blind SQL injection attack to query the contents of the UAA database, aka "Blind SQL Injection with privileged UAA endpoints." |
| CVE-2017-4973 | An issue was discovered in Cloud Foundry Foundation cf-release versions prior to v257; UAA release 2.x versions prior to v2.7.4.14, 3.6.x versions prior to v3.6.8, 3.9.x versions prior to v3.9.10, and other versions prior to v3.15.0; and UAA bosh release (uaa-release) 13.x versions prior to v13.12, 24.x versions prior to v24.7, and other versions prior to v30. A vulnerability has been identified with the groups endpoint in UAA allowing users to elevate their privileges. |
| CVE-2017-4972 | An issue was discovered in Cloud Foundry Foundation cf-release versions prior to v257; UAA release 2.x versions prior to v2.7.4.14, 3.6.x versions prior to v3.6.8, 3.9.x versions prior to v3.9.10, and other versions prior to v3.15.0; and UAA bosh release (uaa-release) 13.x versions prior to v13.12, 24.x versions prior to v24.7, and other versions prior to v30. An attacker can use a blind SQL injection attack to query the contents of the UAA database. |
| CVE-2017-4970 | An issue was discovered in Cloud Foundry Foundation cf-release v255 and Staticfile buildpack versions v1.4.0 - v1.4.3. A regression introduced in the Static file build pack causes the Staticfile.auth configuration to be ignored when the Static file file is not present in the application root. Applications containing a Staticfile.auth file but not a Static file had their basic auth turned off when an operator upgraded the Static file build pack in the foundation to one of the vulnerable versions. Note that Static file applications without a Static file are technically misconfigured, and will not successfully detect unless the Static file build pack is explicitly specified. |
| CVE-2017-4969 | The Cloud Controller in Cloud Foundry cf-release versions prior to v255 allows authenticated developer users to exceed memory and disk quotas for tasks. |
| CVE-2017-4964 | Cloud Foundry Foundation BOSH Azure CPI v22 could potentially allow a maliciously crafted stemcell to execute arbitrary code on VMs created by the director, aka a "CPI code injection vulnerability." |
| CVE-2017-4963 | An issue was discovered in Cloud Foundry Foundation Cloud Foundry release v252 and earlier versions, UAA stand-alone release v2.0.0 - v2.7.4.12 & v3.0.0 - v3.11.0, and UAA bosh release v26 & earlier versions. UAA is vulnerable to session fixation when configured to authenticate against external SAML or OpenID Connect based identity providers. |
| CVE-2017-4961 | An issue was discovered in Cloud Foundry Foundation BOSH Release 261.x versions prior to 261.3 and all 260.x versions. In certain cases an authenticated Director user can provide a malicious checksum that could allow them to escalate their privileges on the Director VM, aka "BOSH Director Shell Injection Vulnerabilities." |
| CVE-2017-4960 | An issue was discovered in Cloud Foundry release v247 through v252, UAA stand-alone release v3.9.0 through v3.11.0, and UAA Bosh Release v21 through v26. There is a potential to subject the UAA OAuth clients to a denial of service attack. |
| CVE-2017-4959 | An issue was discovered in Pivotal PCF Elastic Runtime 1.8.x versions prior to 1.8.29 and 1.9.x versions prior to 1.9.7. Pivotal Cloud Foundry deployments using the Pivotal Account application are vulnerable to a flaw which allows an authorized user to take over the account of another user, causing account lockout and potential escalation of privileges. |
| CVE-2017-3889 | A vulnerability in the web interface of the Cisco Registered Envelope Service could allow an unauthenticated, remote attacker to redirect a user to a undesired web page, aka an Open Redirect. This vulnerability affects the Cisco Registered Envelope cloud-based service. More Information: CSCvc60123. Known Affected Releases: 5.1.0-015. |
| CVE-2017-3883 | A vulnerability in the authentication, authorization, and accounting (AAA) implementation of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability occurs because AAA processes prevent the NX-OS System Manager from receiving keepalive messages when an affected device receives a high rate of login attempts, such as in a brute-force login attack. System memory can run low on the FXOS devices under the same conditions, which could cause the AAA process to unexpectedly restart or cause the device to reload. An attacker could exploit this vulnerability by performing a brute-force login attack against a device that is configured with AAA security services. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects the following Cisco products if they are running Cisco FXOS or NX-OS System Software that is configured for AAA services: Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System (UCS) 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuq58760, CSCuq71257, CSCur97432, CSCus05214, CSCux54898, CSCvc33141, CSCvd36971, CSCve03660. |
| CVE-2017-3007 | Adobe Thor versions 3.9.5.353 and earlier have a vulnerability in the directory search path used to find resources, related to Creative Cloud desktop applications. |
| CVE-2017-3006 | Adobe Thor versions 3.9.5.353 and earlier have a vulnerability related to the use of improper resource permissions during the installation of Creative Cloud desktop applications. |
| CVE-2017-18263 | Seagate Media Server in Seagate Personal Cloud before 4.3.18.4 has directory traversal in getPhotoPlaylistPhotos.psp via a parameter named url. |
| CVE-2017-16867 | Amazon Key through 2017-11-16 mishandles Cloud Cam 802.11 deauthentication frames during the delivery process, which makes it easier for (1) delivery drivers to freeze a camera and re-enter a house for unfilmed activities or (2) attackers to freeze a camera and enter a house if a delivery driver failed to ensure a locked door before leaving. |
| CVE-2017-16544 | In the add_match function in libbb/lineedit.c in BusyBox through 1.27.2, the tab autocomplete feature of the shell, used to get a list of filenames in a directory, does not sanitize filenames and results in executing any escape sequence in the terminal. This could potentially result in code execution, arbitrary file writes, or other attacks. |
| CVE-2017-14706 | DenyAll WAF before 6.4.1 allows unauthenticated remote attackers to obtain authentication information by making a typeOf=debug request to /webservices/download/index.php, and then reading the iToken field in the reply. This affects DenyAll i-Suite LTS 5.5.0 through 5.5.12, i-Suite 5.6, Web Application Firewall 5.7, and Web Application Firewall 6.x before 6.4.1, with On Premises or AWS/Azure cloud deployments. |
| CVE-2017-14705 | DenyAll WAF before 6.4.1 allows unauthenticated remote command execution via TCP port 3001 because shell metacharacters can be inserted into the type parameter to the tailDateFile function in /webservices/stream/tail.php. An iToken authentication parameter is required but can be obtained by exploiting CVE-2017-14706. This affects DenyAll i-Suite LTS 5.5.0 through 5.5.12, i-Suite 5.6, Web Application Firewall 5.7, and Web Application Firewall 6.x before 6.4.1, with On Premises or AWS/Azure cloud deployments. |
| CVE-2017-14419 | The D-Link NPAPI extension, as used on D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices, participates in mydlink Cloud Services by establishing a TCP relay service for HTTP, even though a TCP relay service for HTTPS is also established. |
| CVE-2017-14418 | The D-Link NPAPI extension, as used in conjunction with D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices, sends the cleartext admin password over the Internet as part of interaction with mydlink Cloud Services. |
| CVE-2017-14417 | register_send.php on D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices does not require authentication, which can result in unintended enrollment in mydlink Cloud Services. |
| CVE-2017-14390 | In Cloud Foundry Foundation cf-deployment v0.35.0, a misconfiguration with Loggregator and syslog-drain causes logs to be drained to unintended locations. |
| CVE-2017-14389 | An issue was discovered in Cloud Foundry Foundation capi-release (all versions prior to 1.45.0), cf-release (all versions prior to v280), and cf-deployment (all versions prior to v1.0.0). The Cloud Controller does not prevent space developers from creating subdomains to an already existing route that belongs to a different user in a different org and space, aka an "Application Subdomain Takeover." |
| CVE-2017-14388 | Cloud Foundry Foundation GrootFS release 0.3.x versions prior to 0.30.0 do not validate DiffIDs, allowing specially crafted images to poison the grootfs volume cache. For example, this could allow an attacker to provide an image layer that GrootFS would consider to be the Ubuntu base layer. |
| CVE-2017-12323 | Multiple vulnerabilities in the web interface of the Cisco Registered Envelope Service (a cloud-based service) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack or redirect a user of the affected service to an undesired web page. The vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of the affected service. An attacker could exploit these vulnerabilities by persuading a user to click a malicious link or by sending an HTTP request that could cause the affected service to redirect the request to a specified malicious URL. A successful exploit could allow the attacker to execute arbitrary script code in the context of the web interface of the affected system or allow the attacker to access sensitive browser-based information on the affected system. These types of exploits could also be used in phishing attacks that send users to malicious websites without their knowledge. Cisco Bug IDs: CSCve77195, CSCve90978, CSCvf42310, CSCvf42703, CSCvf42723, CSCvf46169, CSCvf49999. |
| CVE-2017-12322 | Multiple vulnerabilities in the web interface of the Cisco Registered Envelope Service (a cloud-based service) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack or redirect a user of the affected service to an undesired web page. The vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of the affected service. An attacker could exploit these vulnerabilities by persuading a user to click a malicious link or by sending an HTTP request that could cause the affected service to redirect the request to a specified malicious URL. A successful exploit could allow the attacker to execute arbitrary script code in the context of the web interface of the affected system or allow the attacker to access sensitive browser-based information on the affected system. These types of exploits could also be used in phishing attacks that send users to malicious websites without their knowledge. Cisco Bug IDs: CSCve77195, CSCve90978, CSCvf42310, CSCvf42703, CSCvf42723, CSCvf46169, CSCvf49999. |
| CVE-2017-12321 | Multiple vulnerabilities in the web interface of the Cisco Registered Envelope Service (a cloud-based service) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack or redirect a user of the affected service to an undesired web page. The vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of the affected service. An attacker could exploit these vulnerabilities by persuading a user to click a malicious link or by sending an HTTP request that could cause the affected service to redirect the request to a specified malicious URL. A successful exploit could allow the attacker to execute arbitrary script code in the context of the web interface of the affected system or allow the attacker to access sensitive browser-based information on the affected system. These types of exploits could also be used in phishing attacks that send users to malicious websites without their knowledge. Cisco Bug IDs: CSCve77195, CSCve90978, CSCvf42310, CSCvf42703, CSCvf42723, CSCvf46169, CSCvf49999. |
| CVE-2017-12320 | Multiple vulnerabilities in the web interface of the Cisco Registered Envelope Service (a cloud-based service) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack or redirect a user of the affected service to an undesired web page. The vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of the affected service. An attacker could exploit these vulnerabilities by persuading a user to click a malicious link or by sending an HTTP request that could cause the affected service to redirect the request to a specified malicious URL. A successful exploit could allow the attacker to execute arbitrary script code in the context of the web interface of the affected system or allow the attacker to access sensitive browser-based information on the affected system. These types of exploits could also be used in phishing attacks that send users to malicious websites without their knowledge. Cisco Bug IDs: CSCve77195, CSCve90978, CSCvf42310, CSCvf42703, CSCvf42723, CSCvf46169, CSCvf49999. |
| CVE-2017-12292 | Multiple vulnerabilities in the web interface of the Cisco Registered Envelope Service (a cloud-based service) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack or redirect a user of the affected service to an undesired web page. The vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of the affected service. An attacker could exploit these vulnerabilities by persuading a user to click a malicious link or by sending an HTTP request that could cause the affected service to redirect the request to a specified malicious URL. A successful exploit could allow the attacker to execute arbitrary script code in the context of the web interface of the affected system or allow the attacker to access sensitive browser-based information on the affected system. These types of exploits could also be used in phishing attacks that send users to malicious websites without their knowledge. Cisco Bug IDs: CSCve77195, CSCve90978, CSCvf42310, CSCvf42703, CSCvf42723, CSCvf46169, CSCvf49999. |
| CVE-2017-12291 | Multiple vulnerabilities in the web interface of the Cisco Registered Envelope Service (a cloud-based service) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack or redirect a user of the affected service to an undesired web page. The vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of the affected service. An attacker could exploit these vulnerabilities by persuading a user to click a malicious link or by sending an HTTP request that could cause the affected service to redirect the request to a specified malicious URL. A successful exploit could allow the attacker to execute arbitrary script code in the context of the web interface of the affected system or allow the attacker to access sensitive browser-based information on the affected system. These types of exploits could also be used in phishing attacks that send users to malicious websites without their knowledge. Cisco Bug IDs: CSCve77195, CSCve90978, CSCvf42310, CSCvf42703, CSCvf42723, CSCvf46169, CSCvf49999. |
| CVE-2017-12290 | Multiple vulnerabilities in the web interface of the Cisco Registered Envelope Service (a cloud-based service) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack or redirect a user of the affected service to an undesired web page. The vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of the affected service. An attacker could exploit these vulnerabilities by persuading a user to click a malicious link or by sending an HTTP request that could cause the affected service to redirect the request to a specified malicious URL. A successful exploit could allow the attacker to execute arbitrary script code in the context of the web interface of the affected system or allow the attacker to access sensitive browser-based information on the affected system. These types of exploits could also be used in phishing attacks that send users to malicious websites without their knowledge. Cisco Bug IDs: CSCve77195, CSCve90978, CSCvf42310, CSCvf42703, CSCvf42723, CSCvf46169, CSCvf49999. |
| CVE-2017-12251 | A vulnerability in the web console of the Cisco Cloud Services Platform (CSP) 2100 could allow an authenticated, remote attacker to interact maliciously with the services or virtual machines (VMs) operating remotely on an affected CSP device. The vulnerability is due to weaknesses in the generation of certain authentication mechanisms in the URL of the web console. An attacker could exploit this vulnerability by browsing to one of the hosted VMs' URLs in Cisco CSP and viewing specific patterns that control the web application's mechanisms for authentication control. An exploit could allow the attacker to access a specific VM on the CSP, which causes a complete loss of the system's confidentiality, integrity, and availability. This vulnerability affects Cisco Cloud Services Platform (CSP) 2100 running software release 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, or 2.2.2. Cisco Bug IDs: CSCve64690. |
| CVE-2017-12246 | A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063. |
| CVE-2017-12085 | An exploitable routing vulnerability exists in the Circle with Disney cloud infrastructure. A specially crafted packet can make the Circle cloud route a packet to any arbitrary Circle device. An attacker needs network connectivity to the Internet to trigger this vulnerability. |
| CVE-2017-1143 | IBM Kenexa LCMS Premier on Cloud 9.x and 10.0 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM Reference #: 1998874. |
| CVE-2017-1142 | IBM Kenexa LCMS Premier on Cloud 9.x and 10.0 could allow a remote attacker to obtain sensitive information, caused by the failure to set the secure flag for the session cookie in SSL mode. By intercepting its transmission within an HTTP session, an attacker could exploit this vulnerability to capture the cookie and obtain sensitive information. IBM Reference #: 1998874. |
| CVE-2017-11158 | Multiple untrusted search path vulnerabilities in the installer in Synology Cloud Station Drive before 4.2.5-4396 on Windows allow local attackers to execute arbitrary code and conduct DLL hijacking attacks via a Trojan horse (1) shfolder.dll, (2) ntmarta.dll, (3) secur32.dll or (4) dwmapi.dll file in the current working directory. |
| CVE-2017-11157 | Multiple untrusted search path vulnerabilities in the installer in Synology Cloud Station Backup before 4.2.5-4396 on Windows allow local attackers to execute arbitrary code and conduct DLL hijacking attacks via a Trojan horse (1) shfolder.dll, (2) ntmarta.dll, (3) secur32.dll or (4) dwmapi.dll file in the current working directory. |
| CVE-2017-10899 | SQL injection vulnerability in the A-Reserve and A-Reserve for MT cloud versions 3.8.6 and earlier allows an attacker to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2017-10898 | SQL injection vulnerability in the A-Member and A-Member for MT cloud versions 3.8.6 and earlier allows an attacker to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2017-10600 | ubuntu-image 1.0 before 2017-07-07, when invoked as non-root, creates files in the resulting image with the uid of the invoking user. When the resulting image is booted, a local attacker with the same uid as the image creator has unintended access to cloud-init and snapd directories. |
| CVE-2017-10232 | Vulnerability in the Hospitality WebSuite8 Cloud Service component of Oracle Hospitality Applications (subcomponent: General). Supported versions that are affected are 8.9.6 and 8.10.x. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Hospitality WebSuite8 Cloud Service. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Hospitality WebSuite8 Cloud Service accessible data as well as unauthorized update, insert or delete access to some of Hospitality WebSuite8 Cloud Service accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Hospitality WebSuite8 Cloud Service. CVSS 3.0 Base Score 7.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:L). |
| CVE-2017-10128 | Vulnerability in the Hospitality WebSuite8 Cloud Service component of Oracle Hospitality Applications (subcomponent: General). Supported versions that are affected are 8.9.6 and 8.10.x. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Hospitality WebSuite8 Cloud Service. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Hospitality WebSuite8 Cloud Service, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Hospitality WebSuite8 Cloud Service accessible data as well as unauthorized read access to a subset of Hospitality WebSuite8 Cloud Service accessible data. CVSS 3.0 Base Score 6.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N). |
| CVE-2017-10064 | Vulnerability in the Hospitality WebSuite8 Cloud Service component of Oracle Hospitality Applications (subcomponent: General). Supported versions that are affected are 8.9.6 and 8.10.x. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Hospitality WebSuite8 Cloud Service. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Hospitality WebSuite8 Cloud Service, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Hospitality WebSuite8 Cloud Service accessible data as well as unauthorized read access to a subset of Hospitality WebSuite8 Cloud Service accessible data. CVSS 3.0 Base Score 6.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N). |
| CVE-2017-1002100 | Default access permissions for Persistent Volumes (PVs) created by the Kubernetes Azure cloud provider in versions 1.6.0 to 1.6.5 are set to "container" which exposes a URI that can be accessed without authentication on the public internet. Access to the URI string requires privileged access to the Kubernetes cluster or authenticated access to the Azure portal. |
| CVE-2016-9994 | IBM Kenexa LCMS Premier on Cloud 9.0, and 10.0.0 is vulnerable to SQL injection. A remote attacker could send specially-crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM Reference #: 1976805. |
| CVE-2016-9993 | IBM Kenexa LCMS Premier on Cloud 9.0, and 10.0.0 is vulnerable to SQL injection. A remote attacker could send specially-crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM Reference #: 1992067. |
| CVE-2016-9992 | IBM Kenexa LCMS Premier on Cloud 9.0, and 10.0.0 is vulnerable to SQL injection. A remote attacker could send specially-crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM Reference #: 1992067. |
| CVE-2016-9882 | An issue was discovered in Cloud Foundry Foundation cf-release versions prior to v250 and CAPI-release versions prior to v1.12.0. Cloud Foundry logs the credentials returned from service brokers in Cloud Controller system component logs. These logs are written to disk and often sent to a log aggregator via syslog. |
| CVE-2016-9880 | The GemFire broker for Cloud Foundry 1.6.x before 1.6.5 and 1.7.x before 1.7.1 has multiple API endpoints which do not require authentication and could be used to gain access to the cluster managed by the broker. |
| CVE-2016-9592 | openshift before versions 3.3.1.11, 3.2.1.23, 3.4 is vulnerable to a flaw when a volume fails to detach, which causes the delete operation to fail with 'VolumeInUse' error. Since the delete operation is retried every 30 seconds for each volume, this could lead to a denial of service attack as the number of API requests being sent to the cloud-provider exceeds the API's rate-limit. |
| CVE-2016-9012 | CloudVision Portal (CVP) before 2016.1.2.1 allows remote authenticated users to gain access to the internal configuration mechanisms via the management plane, related to a request to /web/system/console/bundle. |
| CVE-2016-8935 | IBM Kenexa LMS on Cloud 13.1, 13.2, 13.2.2, 13.2.3, 13.2.4 and 14.0.0 are vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM Reference #: 1999483. |
| CVE-2016-8933 | IBM Kenexa LMS on Cloud could allow a remote attacker to traverse directories on the system. An attacker could send a specially-crafted URL request containing dot dot sequences (/../) to view arbitrary files on the system. |
| CVE-2016-8932 | IBM Kenexa LMS on Cloud could allow a remote attacker to upload arbitrary files, which could allow the attacker to execute arbitrary code on the vulnerable server. |
| CVE-2016-8931 | IBM Kenexa LMS on Cloud could allow a remote attacker to upload arbitrary files, which could allow the attacker to execute arbitrary code on the vulnerable server. |
| CVE-2016-8930 | IBM Kenexa LMS on Cloud is vulnerable to SQL injection. A remote attacker could send specially-crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. |
| CVE-2016-8929 | IBM Kenexa LMS on Cloud is vulnerable to SQL injection. A remote attacker could send specially-crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. |
| CVE-2016-8928 | IBM Kenexa LMS on Cloud is vulnerable to SQL injection. A remote attacker could send specially-crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. |
| CVE-2016-8920 | IBM Kenexa LMS on Cloud 13.1 and 13.2 - 13.2.4 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| CVE-2016-8913 | IBM Kenexa LMS on Cloud 13.1 and 13.2 - 13.2.4 could allow a remote attacker to traverse directories on the system. An attacker could send a specially-crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. |
| CVE-2016-8912 | IBM Kenexa LMS on Cloud 13.1 and 13.2 - 13.2.4 stores potentially sensitive information in in log files that could be read by an authenticated user. |
| CVE-2016-8911 | IBM Kenexa LMS on Cloud 13.1 and 13.2 - 13.2.4 could allow a remote attacker to hijack the clicking action of the victim. By persuading a victim to visit a malicious Web site, a remote attacker could exploit this vulnerability to hijack the victim's click actions and possibly launch further attacks against the victim. |
| CVE-2016-8219 | An issue was discovered in Cloud Foundry Foundation cf-release versions prior to 250 and CAPI-release versions prior to 1.12.0. A user with the SpaceAuditor role is over-privileged with the ability to restage applications. This could cause application downtime if the restage fails. |
| CVE-2016-8218 | An issue was discovered in Cloud Foundry Foundation routing-release versions prior to 0.142.0 and cf-release versions 203 to 231. Incomplete validation logic in JSON Web Token (JWT) libraries can allow unprivileged attackers to impersonate other users to the routing API, aka an "Unauthenticated JWT signing algorithm in routing" issue. |
| CVE-2016-7419 | Cross-site scripting (XSS) vulnerability in share.js in the gallery application in ownCloud Server before 9.0.4 and Nextcloud Server before 9.0.52 allows remote authenticated users to inject arbitrary web script or HTML via a crafted directory name. |
| CVE-2016-7060 | The web interface in Red Hat QuickStart Cloud Installer (QCI) 1.0 does not mask passwords fields, which allows physically proximate attackers to obtain sensitive password information by reading the display. |
| CVE-2016-6935 | Unquoted Windows search path vulnerability in Adobe Creative Cloud Desktop Application before 3.8.0.310 on Windows allows local users to gain privileges via a Trojan horse executable file in the %SYSTEMDRIVE% directory. |
| CVE-2016-6829 | The trove service user in (1) Openstack deployment (aka crowbar-openstack) and (2) Trove Barclamp (aka barclamp-trove and crowbar-barclamp-trove) in the Crowbar Framework has a default password, which makes it easier for remote attackers to obtain access via unspecified vectors. |
| CVE-2016-6659 | Cloud Foundry before 248; UAA 2.x before 2.7.4.12, 3.x before 3.6.5, and 3.7.x through 3.9.x before 3.9.3; and UAA bosh release (aka uaa-release) before 13.9 for UAA 3.6.5 and before 24 for UAA 3.9.3 allow attackers to gain privileges by accessing UAA logs and subsequently running a specially crafted application that interacts with a configured SAML provider. |
| CVE-2016-6658 | Applications in cf-release before 245 can be configured and pushed with a user-provided custom buildpack using a URL pointing to the buildpack. Although it is not recommended, a user can specify a credential in the URL (basic auth or OAuth) to access the buildpack through the CLI. For example, the user could include a GitHub username and password in the URL to access a private repo. Because the URL to access the buildpack is stored unencrypted, an operator with privileged access to the Cloud Controller database could view these credentials. |
| CVE-2016-6657 | An open redirect vulnerability has been detected with some Pivotal Cloud Foundry Elastic Runtime components. Users of affected versions should apply the following mitigation: Upgrade PCF Elastic Runtime 1.8.x versions to 1.8.12 or later. Upgrade PCF Ops Manager 1.7.x versions to 1.7.18 or later and 1.8.x versions to 1.8.10 or later. |
| CVE-2016-6655 | An issue was discovered in Cloud Foundry Foundation Cloud Foundry release versions prior to v245 and cf-mysql-release versions prior to v31. A command injection vulnerability was discovered in a common script used by many Cloud Foundry components. A malicious user may exploit numerous vectors to execute arbitrary commands on servers running Cloud Foundry. |
| CVE-2016-6653 | The MariaDB audit_plugin component in Pivotal Cloud Foundry (PCF) cf-mysql-release 27 and 28 allows remote attackers to obtain sensitive information by reading syslog messages, as demonstrated by cleartext credentials. |
| CVE-2016-6651 | The UAA /oauth/token endpoint in Pivotal Cloud Foundry (PCF) before 243; UAA 2.x before 2.7.4.8, 3.x before 3.3.0.6, and 3.4.x before 3.4.5; UAA BOSH before 11.7 and 12.x before 12.6; Elastic Runtime before 1.6.40, 1.7.x before 1.7.21, and 1.8.x before 1.8.2; and Ops Manager 1.7.x before 1.7.13 and 1.8.x before 1.8.1 allows remote authenticated users to gain privileges by leveraging possession of a token. |
| CVE-2016-6639 | Cloud Foundry PHP Buildpack (aka php-buildpack) before 4.3.18 and PHP Buildpack Cf-release before 242, as used in Pivotal Cloud Foundry (PCF) Elastic Runtime before 1.6.38 and 1.7.x before 1.7.19 and other products, place the .profile file in the htdocs directory, which might allow remote attackers to obtain sensitive information via an HTTP GET request for this file. |
| CVE-2016-6637 | Multiple cross-site request forgery (CSRF) vulnerabilities in Pivotal Cloud Foundry (PCF) before 242; UAA 2.x before 2.7.4.7, 3.x before 3.3.0.5, and 3.4.x before 3.4.4; UAA BOSH before 11.5 and 12.x before 12.5; Elastic Runtime before 1.6.40, 1.7.x before 1.7.21, and 1.8.x before 1.8.2; and Ops Manager 1.7.x before 1.7.13 and 1.8.x before 1.8.1 allow remote attackers to hijack the authentication of unspecified victims for requests that approve or deny a scope via a profile or authorize approval page. |
| CVE-2016-6636 | The OAuth authorization implementation in Pivotal Cloud Foundry (PCF) before 242; UAA 2.x before 2.7.4.7, 3.x before 3.3.0.5, and 3.4.x before 3.4.4; UAA BOSH before 11.5 and 12.x before 12.5; Elastic Runtime before 1.6.40, 1.7.x before 1.7.21, and 1.8.x before 1.8.1; and Ops Manager 1.7.x before 1.7.13 and 1.8.x before 1.8.1 mishandles redirect_uri subdomains, which allows remote attackers to obtain implicit access tokens via a modified subdomain. |
| CVE-2016-6547 | The Zizai Tech Nut mobile app stores the account password used to authenticate to the cloud API in cleartext in the cache.db file. |
| CVE-2016-6546 | The iTrack Easy mobile application stores the account password used to authenticate to the cloud API in base64-encoding in the cache.db file. The base64 encoding format is considered equivalent to cleartext. |
| CVE-2016-6540 | Unauthenticated access to the cloud-based service maintained by TrackR Bravo is allowed for querying or sending GPS data for any Trackr device by using the tracker ID number which can be discovered as described in CVE-2016-6539. Updated apps, version 5.1.6 for iOS and 2.2.5 for Android, have been released by the vendor to address the vulnerabilities in CVE-2016-6538, CVE-2016-6539, CVE-2016-6540 and CVE-2016-6541. |
| CVE-2016-6538 | The TrackR Bravo mobile app stores the account password used to authenticate to the cloud API in cleartext in the cache.db file. Updated apps, version 5.1.6 for iOS and 2.2.5 for Android, have been released by the vendor to address the vulnerabilities in CVE-2016-6538, CVE-2016-6539, CVE-2016-6540 and CVE-2016-6541. |
| CVE-2016-6374 | Cisco Cloud Services Platform (CSP) 2100 2.0 allows remote attackers to execute arbitrary code via a crafted dnslookup command in an HTTP request, aka Bug ID CSCuz89093. |
| CVE-2016-6373 | The web-based GUI in Cisco Cloud Services Platform (CSP) 2100 2.0 allows remote authenticated administrators to execute arbitrary OS commands as root via crafted platform commands, aka Bug ID CSCva00541. |
| CVE-2016-6340 | The kickstart file in Red Hat QuickStart Cloud Installer (QCI) forces use of MD5 passwords on deployed systems, which makes it easier for attackers to determine cleartext passwords via a brute-force attack. |
| CVE-2016-6322 | Red Hat QuickStart Cloud Installer (QCI) uses world-readable permissions for /etc/qci/answers, which allows local users to obtain the root password for the deployed system by reading the file. |
| CVE-2016-6301 | The recv_and_process_client_pkt function in networking/ntpd.c in busybox allows remote attackers to cause a denial of service (CPU and bandwidth consumption) via a forged NTP packet, which triggers a communication loop. |
| CVE-2016-6126 | IBM Kenexa LMS on Cloud 13.1 and 13.2 - 13.2.4 could allow a remote attacker to traverse directories on the system. An attacker could send a specially-crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. |
| CVE-2016-6125 | IBM Kenexa LMS on Cloud 13.1 and 13.2 - 13.2.4 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| CVE-2016-6124 | IBM Kenexa LMS on Cloud 13.1 and 13.2 - 13.2.4 could allow a remote attacker to upload arbitrary files, which could allow the attacker to execute arbitrary code on the vulnerable server. |
| CVE-2016-6123 | IBM Kenexa LMS on Cloud 13.1 and 13.2 - 13.2.4 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| CVE-2016-6122 | IBM Kenexa LMS on Cloud 13.1 and 13.2 - 13.2.4 discloses answers to security questions in a response to authenticated users. |
| CVE-2016-5952 | IBM Kenexa LCMS Premier on Cloud is vulnerable to SQL injection. A remote attacker could send specially-crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. |
| CVE-2016-5951 | IBM Kenexa LCMS Premier on Cloud is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| CVE-2016-5950 | IBM Kenexa LCMS Premier on Cloud stores user credentials in plain in clear text which can be read by an authenticated user. |
| CVE-2016-5949 | IBM Kenexa LCMS Premier on Cloud could allow an authenticated user to obtain sensitive user data with a specially crafted HTTP request. |
| CVE-2016-5948 | IBM Kenexa LCMS Premier on Cloud is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| CVE-2016-5942 | IBM Kenexa LMS on Cloud is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| CVE-2016-5941 | IBM Kenexa LMS on Cloud could allow a remote attacker to traverse directories on the system. An attacker could send a specially-crafted URL request containing dot dot sequences (/../) to view arbitrary files on the system. |
| CVE-2016-5940 | IBM Kenexa LMS on Cloud is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| CVE-2016-5939 | IBM Kenexa LMS on Cloud is vulnerable to SQL injection. A remote attacker could send specially-crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. |
| CVE-2016-5938 | IBM Kenexa LMS on Cloud allows web pages to be stored locally which can be read by another user on the system. |
| CVE-2016-5937 | IBM Kenexa LCMS Premier on Cloud is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. |
| CVE-2016-5900 | IBM Tealeaf Customer Experience on Cloud Network Capture Add-On could allow a remote attacker to obtain sensitive information, caused by the failure to properly validate the TLS certificate. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. |
| CVE-2016-5850 | Cross-site scripting (XSS) vulnerability in the volume backup service module in Huawei Public Cloud Solution before 1.0.5 allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2016-5411 | /var/lib/ovirt-engine/setup/engine-DC-config.py in Red Hat QuickStart Cloud Installer (QCI) before 1.0 GA is created world readable and contains the root password of the deployed system. |
| CVE-2016-5311 | A Privilege Escalation vulnerability exists in Symantec Norton Antivirus, Norton AntiVirus with Backup, Norton Security, Norton Security with Backup, Norton Internet Security, Norton 360, Endpoint Protection Small Business Edition Cloud, and Endpoint Protection Cloud Client due to a DLL-preloading without path restrictions, which could let a local malicious user obtain system privileges. |
| CVE-2016-5310 | The RAR file parser component in the AntiVirus Decomposer engine in Symantec Advanced Threat Protection: Network (ATP); Symantec Email Security.Cloud; Symantec Data Center Security: Server; Symantec Endpoint Protection (SEP) for Windows before 12.1.6 MP5; Symantec Endpoint Protection (SEP) for Mac; Symantec Endpoint Protection (SEP) for Linux before 12.1.6 MP6; Symantec Endpoint Protection for Small Business Enterprise (SEP SBE/SEP.Cloud); Symantec Endpoint Protection Cloud (SEPC) for Windows/Mac; Symantec Endpoint Protection Small Business Edition 12.1; CSAPI before 10.0.4 HF02; Symantec Protection Engine (SPE) before 7.0.5 HF02, 7.5.x before 7.5.4 HF02, 7.5.5 before 7.5.5 HF01, and 7.8.x before 7.8.0 HF03; Symantec Mail Security for Domino (SMSDOM) before 8.0.9 HF2.1, 8.1.x before 8.1.2 HF2.3, and 8.1.3 before 8.1.3 HF2.2; Symantec Mail Security for Microsoft Exchange (SMSMSE) before 6.5.8_3968140 HF2.3, 7.x before 7.0_3966002 HF2.1, and 7.5.x before 7.5_3966008 VHF2.2; Symantec Protection for SharePoint Servers (SPSS) before SPSS_6.0.3_To_6.0.5_HF_2.5 update, 6.0.6 before 6.0.6 HF_2.6, and 6.0.7 before 6.0.7_HF_2.7; Symantec Messaging Gateway (SMG) before 10.6.2; Symantec Messaging Gateway for Service Providers (SMG-SP) before 10.5 patch 260 and 10.6 before patch 259; Symantec Web Gateway; and Symantec Web Security.Cloud allows remote attackers to cause a denial of service (memory corruption) via a crafted RAR file that is mishandled during decompression. |
| CVE-2016-5309 | The RAR file parser component in the AntiVirus Decomposer engine in Symantec Advanced Threat Protection: Network (ATP); Symantec Email Security.Cloud; Symantec Data Center Security: Server; Symantec Endpoint Protection (SEP) for Windows before 12.1.6 MP5; Symantec Endpoint Protection (SEP) for Mac; Symantec Endpoint Protection (SEP) for Linux before 12.1.6 MP6; Symantec Endpoint Protection for Small Business Enterprise (SEP SBE/SEP.Cloud); Symantec Endpoint Protection Cloud (SEPC) for Windows/Mac; Symantec Endpoint Protection Small Business Edition 12.1; CSAPI before 10.0.4 HF02; Symantec Protection Engine (SPE) before 7.0.5 HF02, 7.5.x before 7.5.4 HF02, 7.5.5 before 7.5.5 HF01, and 7.8.x before 7.8.0 HF03; Symantec Mail Security for Domino (SMSDOM) before 8.0.9 HF2.1, 8.1.x before 8.1.2 HF2.3, and 8.1.3 before 8.1.3 HF2.2; Symantec Mail Security for Microsoft Exchange (SMSMSE) before 6.5.8_3968140 HF2.3, 7.x before 7.0_3966002 HF2.1, and 7.5.x before 7.5_3966008 VHF2.2; Symantec Protection for SharePoint Servers (SPSS) before SPSS_6.0.3_To_6.0.5_HF_2.5 update, 6.0.6 before 6.0.6 HF_2.6, and 6.0.7 before 6.0.7_HF_2.7; Symantec Messaging Gateway (SMG) before 10.6.2; Symantec Messaging Gateway for Service Providers (SMG-SP) before 10.5 patch 260 and 10.6 before patch 259; Symantec Web Gateway; and Symantec Web Security.Cloud allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted RAR file that is mishandled during decompression. |
| CVE-2016-5195 | Race condition in mm/gup.c in the Linux kernel 2.x through 4.x before 4.8.3 allows local users to gain privileges by leveraging incorrect handling of a copy-on-write (COW) feature to write to a read-only memory mapping, as exploited in the wild in October 2016, aka "Dirty COW." |
| CVE-2016-5022 | F5 BIG-IP LTM, Analytics, APM, ASM, and Link Controller 11.2.x before 11.2.1 HF16, 11.3.x, 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1 HF1, and 12.x before 12.0.0 HF3; BIG-IP AAM, AFM, and PEM 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1 HF1, and 12.x before 12.0.0 HF3; BIG-IP DNS 12.x before 12.0.0 HF3; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.2.x before 11.2.1 HF16 and 11.3.0; BIG-IP GTM 11.2.x before 11.2.1 HF16, 11.3.x, 11.4.x, 11.5.x before 11.5.4 HF2, and 11.6.x before 11.6.1 HF1; BIG-IP PSM 11.2.x before 11.2.1 HF16, 11.3.x, and 11.4.0 through 11.4.1; Enterprise Manager 3.1.1; BIG-IQ Cloud and Security 4.0.0 through 4.5.0; BIG-IQ Device 4.2.0 through 4.5.0; BIG-IQ ADC 4.5.0; BIG-IQ Centralized Management 5.0.0; BIG-IQ Cloud and Orchestration 1.0.0; and iWorkflow 2.0.0, when Packet Filtering is enabled on virtual servers and possibly self IP addresses, allow remote attackers to cause a denial of service (Traffic Management Microkernel restart) and possibly have unspecified other impact via crafted network traffic. |
| CVE-2016-5021 | The iControl REST service in F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, Link Controller, and PEM 11.5.x before 11.5.4, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF3; BIG-IP DNS 12.x before 12.0.0 HF3; BIG-IP GTM 11.5.x before 11.5.4 and 11.6.x before 11.6.1; BIG-IQ Cloud and Security 4.0.0 through 4.5.0; BIG-IQ Device 4.2.0 through 4.5.0; BIG-IQ ADC 4.5.0; BIG-IQ Centralized Management 4.6.0; and BIG-IQ Cloud and Orchestration 1.0.0 allows remote authenticated administrators to obtain sensitive information via unspecified vectors. |
| CVE-2016-5016 | Pivotal Cloud Foundry 239 and earlier, UAA (aka User Account and Authentication Server) 3.4.1 and earlier, UAA release 12.2 and earlier, PCF (aka Pivotal Cloud Foundry) Elastic Runtime 1.6.x before 1.6.35, and PCF Elastic Runtime 1.7.x before 1.7.13 does not validate if a certificate is expired. |
| CVE-2016-5006 | The Cloud Controller in Cloud Foundry before 239 logs user-provided service objects at creation, which allows attackers to obtain sensitive user credential information via unspecified vectors. |
| CVE-2016-4468 | SQL injection vulnerability in Pivotal Cloud Foundry (PCF) before 238; UAA 2.x before 2.7.4.4, 3.x before 3.3.0.2, and 3.4.x before 3.4.1; UAA BOSH before 11.2 and 12.x before 12.2; Elastic Runtime before 1.6.29 and 1.7.x before 1.7.7; and Ops Manager 1.7.x before 1.7.8 allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2016-4158 | Unquoted Windows search path vulnerability in Adobe Creative Cloud Desktop Application before 3.7.0.272 on Windows allows local users to gain privileges via a Trojan horse executable file in the %SYSTEMDRIVE% directory. |
| CVE-2016-4157 | Untrusted search path vulnerability in the installer in Adobe Creative Cloud Desktop Application before 3.7.0.272 on Windows allows local users to gain privileges via a Trojan horse resource in an unspecified directory. |
| CVE-2016-3727 | The API URL computer/(master)/api/xml in Jenkins before 2.3 and LTS before 1.651.2 allows remote authenticated users with extended read permission for the master node to obtain sensitive information about the global configuration via unspecified vectors. |
| CVE-2016-3725 | Jenkins before 2.3 and LTS before 1.651.2 allows remote authenticated users to trigger updating of update site metadata by leveraging a missing permissions check. NOTE: this issue can be combined with DNS cache poisoning to cause a denial of service (service disruption). |
| CVE-2016-3723 | Jenkins before 2.3 and LTS before 1.651.2 allow remote authenticated users with read access to obtain sensitive plugin installation information by leveraging missing permissions checks in unspecified XML/JSON API endpoints. |
| CVE-2016-3091 | Cloud Foundry Diego 0.1468.0 through 0.1470.0 allows remote attackers to cause a denial of service. |
| CVE-2016-3084 | The UAA reset password flow in Cloud Foundry release v236 and earlier versions, UAA release v3.3.0 and earlier versions, all versions of Login-server, UAA release v10 and earlier versions and Pivotal Elastic Runtime versions prior to 1.7.2 is vulnerable to a brute force attack due to multiple active codes at a given time. This vulnerability is applicable only when using the UAA internal user store for authentication. Deployments enabled for integration via SAML or LDAP are not affected. |
| CVE-2016-2169 | Cloud Foundry Cloud Controller, capi-release versions prior to 1.0.0 and cf-release versions prior to v237, contain a business logic flaw. An application developer may create an application with a route that conflicts with a platform service route and receive traffic intended for the service. |
| CVE-2016-2084 | F5 BIG-IP LTM, AFM, Analytics, APM, ASM, Link Controller, and PEM 11.3.x, 11.4.x before 11.4.1 build 685-HF10, 11.5.1 before build 10.104.180, 11.5.2 before 11.5.4 build 0.1.256, 11.6.0 before build 6.204.442, and 12.0.0 before build 1.14.628; BIG-IP AAM 11.4.x before 11.4.1 build 685-HF10, 11.5.1 before build 10.104.180, 11.5.2 before 11.5.4 build 0.1.256, 11.6.0 before build 6.204.442, and 12.0.0 before build 1.14.628; BIG-IP DNS 12.0.0 before build 1.14.628; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.3.0; BIG-IP GTM 11.3.x, 11.4.x before 11.4.1 build 685-HF10, 11.5.1 before build 10.104.180, 11.5.2 before 11.5.4 build 0.1.256, and 11.6.0 before build 6.204.442; BIG-IP PSM 11.3.x and 11.4.x before 11.4.1 build 685-HF10; BIG-IQ Cloud, Device, and Security 4.2.0 through 4.5.0; and BIG-IQ ADC 4.5.0 do not properly regenerate certificates and keys when deploying cloud images in Amazon Web Services (AWS), Azure or Verizon cloud services environments, which allows attackers to obtain sensitive information or cause a denial of service (disruption) by leveraging a target instance configuration. |
| CVE-2016-2000 | HPE Asset Manager 9.40, 9.41, and 9.50 and Asset Manager CloudSystem Chargeback 9.40 allow remote attackers to execute arbitrary commands via a crafted serialized Java object, related to the Apache Commons Collections (ACC) library. |
| CVE-2016-1441 | Cisco Cloud Network Automation Provisioner (CNAP) 1.0(0) in Cisco Configuration Assistant (CCA) allows remote attackers to bypass intended filesystem and administrative-endpoint restrictions via GET API calls, aka Bug ID CSCuy77145. |
| CVE-2016-1393 | SQL injection vulnerability in Cisco Cloud Network Automation Provisioner (CNAP) 1.0 and 1.1 allows remote authenticated users to execute arbitrary SQL commands via a crafted URL, aka Bug ID CSCuy72175. |
| CVE-2016-1034 | The Sync Process in the JavaScript API for Creative Cloud Libraries in Adobe Creative Cloud Desktop Application before 3.6.0.244 allows remote attackers to read or write to arbitrary files via unspecified vectors. |
| CVE-2016-0930 | Pivotal Cloud Foundry (PCF) Ops Manager before 1.6.19 and 1.7.x before 1.7.10, when vCloud or vSphere is used, has a default password for compilation VMs, which allows remote attackers to obtain SSH access by connecting within an installation-time period during which these VMs exist. |
| CVE-2016-0929 | The metrics-collection component in RabbitMQ for Pivotal Cloud Foundry (PCF) 1.6.x before 1.6.4 logs command lines of failed commands, which might allow context-dependent attackers to obtain sensitive information by reading the log data, as demonstrated by a syslog message that contains credentials from a command line. |
| CVE-2016-0928 | Multiple open redirect vulnerabilities in Pivotal Cloud Foundry (PCF) Elastic Runtime before 1.6.30 and 1.7.x before 1.7.8 allow remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via unspecified vectors. |
| CVE-2016-0927 | Cross-site scripting (XSS) vulnerability in Pivotal Cloud Foundry (PCF) Ops Manager before 1.6.17 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2016-0926 | Cross-site scripting (XSS) vulnerability in Apps Manager in Pivotal Cloud Foundry (PCF) Elastic Runtime before 1.6.32 and 1.7.x before 1.7.8 allows remote attackers to inject arbitrary web script or HTML via unspecified input that improperly interacts with the AngularJS framework. |
| CVE-2016-0897 | Pivotal Cloud Foundry (PCF) Ops Manager before 1.6.17 and 1.7.x before 1.7.8, when vCloud or vSphere is used, does not properly enable SSH access for operators, which has unspecified impact and remote attack vectors. |
| CVE-2016-0896 | Pivotal Cloud Foundry (PCF) Elastic Runtime before 1.6.34 and 1.7.x before 1.7.12 places 169.254.0.0/16 in the all_open Application Security Group, which might allow remote attackers to bypass intended network-connectivity restrictions by leveraging access to the 169.254.169.254 address. |
| CVE-2016-0883 | Pivotal Cloud Foundry (PCF) Ops Manager before 1.5.14 and 1.6.x before 1.6.9 uses the same cookie-encryption key across different customers' installations, which allows remote attackers to bypass session authentication by leveraging knowledge of this key from another installation. |
| CVE-2016-0792 | Multiple unspecified API endpoints in Jenkins before 1.650 and LTS before 1.642.2 allow remote authenticated users to execute arbitrary code via serialized data in an XML file, related to XStream and groovy.util.Expando. |
| CVE-2016-0791 | Jenkins before 1.650 and LTS before 1.642.2 do not use a constant-time algorithm to verify CSRF tokens, which makes it easier for remote attackers to bypass a CSRF protection mechanism via a brute-force approach. |
| CVE-2016-0790 | Jenkins before 1.650 and LTS before 1.642.2 do not use a constant-time algorithm to verify API tokens, which makes it easier for remote attackers to determine API tokens via a brute-force approach. |
| CVE-2016-0789 | CRLF injection vulnerability in the CLI command documentation in Jenkins before 1.650 and LTS before 1.642.2 allows remote attackers to inject arbitrary HTTP headers and conduct HTTP response splitting attacks via unspecified vectors. |
| CVE-2016-0788 | The remoting module in Jenkins before 1.650 and LTS before 1.642.2 allows remote attackers to execute arbitrary code by opening a JRMP listener. |
| CVE-2016-0781 | The UAA OAuth approval pages in Cloud Foundry v208 to v231, Login-server v1.6 to v1.14, UAA v2.0.0 to v2.7.4.1, UAA v3.0.0 to v3.2.0, UAA-Release v2 to v7 and Pivotal Elastic Runtime 1.6.x versions prior to 1.6.20 are vulnerable to an XSS attack by specifying malicious java script content in either the OAuth scopes (SCIM groups) or SCIM group descriptions. |
| CVE-2016-0780 | It was discovered that cf-release v231 and lower, Pivotal Cloud Foundry Elastic Runtime 1.5.x versions prior to 1.5.17 and Pivotal Cloud Foundry Elastic Runtime 1.6.x versions prior to 1.6.18 do not properly enforce disk quotas in certain cases. An attacker could use an improper disk quota value to bypass enforcement and consume all the disk on DEAs/CELLs causing a potential denial of service for other applications. |
| CVE-2016-0761 | Cloud Foundry Garden-Linux versions prior to v0.333.0 and Elastic Runtime 1.6.x version prior to 1.6.17 contain a flaw in managing container files during Docker image preparation that could be used to delete, corrupt or overwrite host files and directories, including other container filesystems on the host. |
| CVE-2016-0732 | The identity zones feature in Pivotal Cloud Foundry 208 through 229; UAA 2.0.0 through 2.7.3 and 3.0.0; UAA-Release 2 through 4, when configured with multiple identity zones; and Elastic Runtime 1.6.0 through 1.6.13 allows remote authenticated users with privileges in one zone to gain privileges and perform operations on a different zone via unspecified vectors. |
| CVE-2016-0715 | Pivotal Cloud Foundry Elastic Runtime version 1.4.0 through 1.4.5, 1.5.0 through 1.5.11 and 1.6.0 through 1.6.11 is vulnerable to a remote information disclosure. It was found that original mitigation configuration instructions provided as part of CVE-2016-0708 were incomplete and could leave PHP Buildpack, Staticfile Buildpack and potentially other custom Buildpack applications vulnerable to remote information disclosure. Affected applications use automated buildpack detection, serve files directly from the root of the application and have a buildpack that matched after the Java Buildpack in the system buildpack priority when Java Buildpack versions 2.0 through 3.4 were present. |
| CVE-2016-0713 | Gorouter in Cloud Foundry cf-release v141 through v228 allows man-in-the-middle attackers to conduct cross-site scripting (XSS) attacks via vectors related to modified requests. |
| CVE-2016-0708 | Applications deployed to Cloud Foundry, versions v166 through v227, may be vulnerable to a remote disclosure of information, including, but not limited to environment variables and bound service details. For applications to be vulnerable, they must have been staged using automatic buildpack detection, passed through the Java Buildpack detection script, and allow the serving of static content from within the deployed artifact. The default Apache Tomcat configuration in the affected java buildpack versions for some basic web application archive (WAR) packaged applications are vulnerable to this issue. |
| CVE-2016-0522 | Unspecified vulnerability in the Oracle Retail Open Commerce Platform Cloud Service component in Oracle Retail Applications 3.5, 4.5, 4.7, and 5.0 allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors related to Framework. |
| CVE-2016-0506 | Unspecified vulnerability in the Oracle Retail Order Management System Cloud Service component in Oracle Retail Applications 3.5, 4.5, 4.7, 5.0, and 15.0 allows remote attackers to affect confidentiality via unknown vectors related to Order Entry. |
| CVE-2016-0500 | Unspecified vulnerability in the Oracle Retail Order Broker Cloud Service component in Oracle Retail Applications 4.0 and 4.1 allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors related to System Administration. |
| CVE-2016-0391 | The IBM Watson Developer Cloud services on Bluemix platforms do not properly generate random numbers for service-instance credentials, which makes it easier for remote attackers to defeat cryptographic protection mechanisms via a brute-force attack. |
| CVE-2016-0206 | IBM Cloud Orchestrator could allow a local authenticated attacker to cause the server to slow down for a short period of time by using a specially crafted and malformed URL. |
| CVE-2016-0205 | A vulnerability has been identified in IBM Cloud Orchestrator 2.3, 2.3.0.1, 2.4, and 2.4.0.1 that could allow an attacker after authentication to enumerate valid users of the system. IBM X-Force ID: 109394. |
| CVE-2016-0204 | Open redirect vulnerability in IBM Cloud Orchestrator 2.4.x before 2.4.0 FP3 allows remote authenticated users to redirect users to arbitrary web sites and conduct phishing attacks via unspecified vectors. |
| CVE-2016-0203 | A vulnerability has been identified in the IBM Cloud Orchestrator task API. The task API might allow an authenticated user to view background information associated with actions performed on virtual machines in projects where the user belongs to. |
| CVE-2016-0202 | A vulnerability has been identified in tasks, backend object generated for handling any action performed by the application in IBM Cloud Orchestrator. It is possible for an authenticated user to view any task of the current users domain. |
| CVE-2015-8843 | The Foxit Cloud Update Service (FoxitCloudUpdateService) in Foxit Reader 6.1 through 6.2.x and 7.x before 7.2.2, when an update to the Cloud plugin is available, allows local users to gain privileges by writing crafted data to a shared memory region, which triggers memory corruption. |
| CVE-2015-8334 | SQL injection vulnerability in the Operation and Maintenance Unit (OMU) in Huawei VCN500 before V100R002C00SPC201 allows remote authenticated users to execute arbitrary SQL commands via a crafted HTTP request. |
| CVE-2015-8333 | The Operation and Maintenance Unit (OMU) in Huawei VCN500 with software before V100R002C00SPC200 allows remote authenticated users to change the IP address of the media server via crafted packets. |
| CVE-2015-8099 | F5 BIG-IP LTM, AFM, Analytics, APM, ASM, Link Controller, and PEM 11.3.x, 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF1; BIG-IP AAM 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF1; BIG-IP DNS 12.x before 12.0.0 HF1; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.3.0; BIG-IP GTM 11.3.x, 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, and 11.6.x before 11.6.1; BIG-IP PSM 11.3.x and 11.4.x before 11.4.1 HF10; Enterprise Manager 3.0.0 through 3.1.1; BIG-IQ Cloud and BIG-IQ Security 4.0.0 through 4.5.0; BIG-IQ Device 4.2.0 through 4.5.0; BIG-IQ ADC 4.5.0; BIG-IQ Centralized Management 4.6.0; and BIG-IQ Cloud and Orchestration 1.0.0 on the 3900, 6900, 8900, 8950, 11000, 11050, PB100 and PB200 platforms, when software SYN cookies are configured on virtual servers, allow remote attackers to cause a denial of service (High-Speed Bridge hang) via an invalid TCP segment. |
| CVE-2015-7844 | Huawei FusionAccess with software V100R005C10,V100R005C20 could allow attackers to craft and send a malformed HDP protocol packet to cause the virtual cloud desktop to be displaying an error and not usable. |
| CVE-2015-7546 | The identity service in OpenStack Identity (Keystone) before 2015.1.3 (Kilo) and 8.0.x before 8.0.2 (Liberty) and keystonemiddleware (formerly python-keystoneclient) before 1.5.4 (Kilo) and Liberty before 2.3.3 does not properly invalidate authorization tokens when using the PKI or PKIZ token providers, which allows remote authenticated users to bypass intended access restrictions and gain access to cloud resources by manipulating byte fields within a revoked token. |
| CVE-2015-7537 | Cross-site request forgery (CSRF) vulnerability in Jenkins before 1.640 and LTS before 1.625.2 allows remote attackers to hijack the authentication of administrators for requests that have unspecified impact via vectors related to the HTTP GET method. |
| CVE-2015-7494 | A vulnerability has been identified in IBM Cloud Orchestrator services/[action]/launch API. An authenticated domain admin user might modify cross domain resources via a /services/[action]/launch API call, provided it would have been possible for the domain admin user to gain access to a resource identifier of the other domain. |
| CVE-2015-7487 | IBM Maximo Asset Management 7.1 through 7.1.1.13, 7.5.0 before 7.5.0.9 IFIX002, and 7.6.0 before 7.6.0.3 IFIX001; Maximo Asset Management 7.5.0 before 7.5.0.9 IFIX002, 7.5.1, and 7.6.0 before 7.6.0.3 IFIX001 for SmartCloud Control Desk; and Maximo Asset Management 7.1 through 7.1.1.13 and 7.2 for Tivoli IT Asset Management for IT and certain other products allow local users to obtain sensitive information by leveraging administrative privileges and reading log files. |
| CVE-2015-7451 | Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management 7.5 before 7.5.0.9 IF2 and 7.6 before 7.6.0.3 FP3 and Maximo Asset Management 7.5 before 7.5.0.9 IF2, 7.5.1, and 7.6 before 7.6.0.3 FP3 for SmartCloud Control Desk allows remote authenticated users to inject arbitrary web script or HTML via a crafted URL. |
| CVE-2015-7448 | SQL injection vulnerability in IBM Maximo Asset Management 7.1 through 7.1.1.13, 7.5.0 before 7.5.0.9 IFIX003, and 7.6.0 before 7.6.0.3 IFIX001; Maximo Asset Management 7.5.0 before 7.5.0.9 IFIX003, 7.5.1, and 7.6.0 before 7.6.0.3 IFIX001 for SmartCloud Control Desk; and Maximo Asset Management 7.1 through 7.1.1.13 and 7.2 for Tivoli IT Asset Management for IT and certain other products allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2015-7396 | The Scheduler in IBM Maximo Asset Management 7.5 before 7.5.0.8 IF6 and 7.6 before 7.6.0.1 FP1 and Maximo Asset Management 7.5 before 7.5.0.8 IF6, 7.5.1, and 7.6 before 7.6.0.1 FP1 for SmartCloud Control Desk allows remote authenticated users to bypass intended access restrictions, and obtain sensitive information or modify data, via unspecified vectors. |
| CVE-2015-7395 | IBM Maximo Asset Management 7.1 through 7.1.1.13, 7.5.0 before 7.5.0.8 IFIX005, and 7.6.0 before 7.6.0.2 FP002; Maximo Asset Management 7.5.0 before 7.5.0.8 IFIX005, 7.5.1, and 7.6.0 before 7.6.0.2 FP002 for SmartCloud Control Desk; and Maximo Asset Management 7.1 through 7.1.1.13 and 7.2 for Tivoli IT Asset Management for IT and certain other products allow remote authenticated users to bypass intended work-order change restrictions via unspecified vectors. |
| CVE-2015-7394 | The datastor kernel module in F5 BIG-IP Analytics, APM, ASM, Link Controller, and LTM 11.1.0 before 12.0.0, BIG-IP AAM 11.4.0 before 12.0.0, BIG-IP AFM, PEM 11.3.0 before 12.0.0, BIG-IP Edge Gateway, WebAccelerator, and WOM 11.1.0 through 11.3.0, BIG-IP GTM 11.1.0 through 11.6.0, BIG-IP PSM 11.1.0 through 11.4.1, BIG-IQ Cloud and Security 4.0.0 through 4.5.0, BIG-IQ Device 4.2.0 through 4.5.0, BIG-IQ ADC 4.5.0, and Enterprise Manager 3.0.0 through 3.1.1 allows remote authenticated users to cause a denial of service or gain privileges by leveraging permission to upload and execute code. |
| CVE-2015-7393 | dcoep in BIG-IP LTM, Analytics, APM, ASM, and Link Controller 11.2.0 through 11.6.0 and 12.0.0 before 12.0.0 HF1, BIG-IP AAM 11.4.0 through 11.6.0 and 12.0.0 before 12.0.0 HF1, BIG-IP AFM and PEM 11.3.0 through 11.6.0 and 12.0.0 before 12.0.0 HF1, BIG-IP DNS 12.0.0 before 12.0.0 HF1, BIG-IP Edge Gateway, WebAccelerator, and WOM 11.2.0 through 11.3.0, BIG-IP GTM 11.2.0 through 11.6.0, BIG-IP PSM 11.2.0 through 11.4.1, Enterprise Manager 3.0.0 through 3.1.1, BIG-IQ Cloud 4.0.0 through 4.5.0, BIG-IQ Device 4.2.0 through 4.5.0, BIG-IQ Security 4.0.0 through 4.5.0, BIG-IQ ADC 4.5.0, BIG-IQ Centralized Management 4.6.0, and BIG-IQ Cloud and Orchestration 1.0.0 allows local users with advanced shell (bash) access to gain privileges via unspecified vectors. |
| CVE-2015-6941 | win_useradd, salt-cloud and the Linode driver in salt 2015.5.x before 2015.5.6, and 2015.8.x before 2015.8.1 leak password information in debug logs. |
| CVE-2015-6385 | The publish-event event-manager feature in Cisco IOS 15.5(2)S and 15.5(3)S on Cloud Services Router 1000V devices allows local users to execute arbitrary commands with root privileges by leveraging administrative access to enter crafted environment variables, aka Bug ID CSCux14943. |
| CVE-2015-5955 | ownCloud iOS app before 3.4.4 does not properly switch state between multiple instances, which might allow remote instance administrators to obtain sensitive credential and cookie information by reading authentication headers. |
| CVE-2015-5953 | Cross-site scripting (XSS) vulnerability in the activity application in ownCloud Server before 7.0.5 and 8.0.x before 8.0.4 allows remote authenticated users to inject arbitrary web script or HTML via a " (double quote) character in a filename in a shared folder. |
| CVE-2015-5516 | Memory leak in the last hop kernel module in F5 BIG-IP LTM, GTM, and Link Controller 10.1.x, 10.2.x before 10.2.4 HF13, 11.x before 11.2.1 HF15, 11.3.x, 11.4.x, 11.5.x before 11.5.3 HF2, and 11.6.x before HF6, BIG-IP AAM 11.4.x, 11.5.x before 11.5.3 HF2 and 11.6.0 before HF6, BIG-IP AFM and PEM 11.3.x, 11.4.x, 11.5.x before 11.5.3 HF2, and 11.6.0 before HF6, BIG-IP Analytics 11.x before 11.2.1 HF15, 11.3.x, 11.4.x, 11.5.x before 11.5.3 HF2, and 11.6.0 before HF6, BIG-IP APM and ASM 10.1.0 through 10.2.4, 11.x before 11.2.1 HF15, 11.3.x, 11.4.x, 11.5.x before 11.5.3 HF2, and 11.6.0 before HF6, BIG-IP Edge Gateway, WebAccelerator, and WOM 10.1.x, 10.2.x before 10.2.4 HF13, 11.x before 11.2.1 HF15, and 11.3.0, BIG-IP PSM 10.1.x, 10.2.x before 10.2.4 HF13, 11.x before 11.2.1 HF15, 11.3.x, and 11.4.x before 11.4.1 HF, Enterprise Manager 3.0.0 through 3.1.1, BIG-IQ Cloud and Security 4.0.0 through 4.5.0, BIG-IQ Device 4.2.0 through 4.5.0, and BIG-IQ ADC 4.5.0 might allow remote attackers to cause a denial of service (memory consumption) via a large number of crafted UDP packets. |
| CVE-2015-5350 | In Garden versions 0.22.0-0.329.0, a vulnerability has been discovered in the garden-linux nstar executable that allows access to files on the host system. By staging an application on Cloud Foundry using Diego and Garden installations with a malicious custom buildpack an end user could read files on the host system that the BOSH-created vcap user has permissions to read and then package them into their app droplet. |
| CVE-2015-5326 | Cross-site scripting (XSS) vulnerability in the slave overview page in Jenkins before 1.638 and LTS before 1.625.2 allows remote authenticated users with certain permissions to inject arbitrary web script or HTML via the slave offline status message. |
| CVE-2015-5325 | Jenkins before 1.638 and LTS before 1.625.2 allow attackers to bypass intended slave-to-master access restrictions by leveraging a JNLP slave. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-3665. |
| CVE-2015-5324 | Jenkins before 1.638 and LTS before 1.625.2 allow remote attackers to obtain sensitive information via a direct request to queue/api. |
| CVE-2015-5323 | Jenkins before 1.638 and LTS before 1.625.2 do not properly restrict access to API tokens which might allow remote administrators to gain privileges and run scripts by using an API token of another user. |
| CVE-2015-5322 | Directory traversal vulnerability in Jenkins before 1.638 and LTS before 1.625.2 allows remote attackers to list directory contents and read arbitrary files in the Jenkins servlet resources via directory traversal sequences in a request to jnlpJars/. |
| CVE-2015-5321 | The sidepanel widgets in the CLI command overview and help pages in Jenkins before 1.638 and LTS before 1.625.2 allow remote attackers to obtain sensitive information via a direct request to the pages. |
| CVE-2015-5319 | XML external entity (XXE) vulnerability in the create-job CLI command in Jenkins before 1.638 and LTS before 1.625.2 allows remote attackers to read arbitrary files via a crafted job configuration that is then used in an "XML-aware tool," as demonstrated by get-job and update-job. |
| CVE-2015-5318 | Jenkins before 1.638 and LTS before 1.625.2 uses a publicly accessible salt to generate CSRF protection tokens, which makes it easier for remote attackers to bypass the CSRF protection mechanism via a brute force attack. |
| CVE-2015-5173 | Cloud Foundry Runtime cf-release before 216, UAA before 2.5.2, and Pivotal Cloud Foundry (PCF) Elastic Runtime before 1.7.0 allow attackers to have unspecified impact via vectors involving emails with password recovery links, aka "Cross Domain Referer Leakage." |
| CVE-2015-5172 | Cloud Foundry Runtime cf-release before 216, UAA before 2.5.2, and Pivotal Cloud Foundry (PCF) Elastic Runtime before 1.7.0 allow attackers to have unspecified impact by leveraging failure to expire password reset links. |
| CVE-2015-5171 | The password change functionality in Cloud Foundry Runtime cf-release before 216, UAA before 2.5.2, and Pivotal Cloud Foundry (PCF) Elastic Runtime before 1.7.0 allow attackers to have unspecified impact by leveraging failure to expire existing sessions. |
| CVE-2015-5170 | Cloud Foundry Runtime cf-release before 216, UAA before 2.5.2, and Pivotal Cloud Foundry (PCF) Elastic Runtime before 1.7.0 allow remote attackers to conduct cross-site request forgery (CSRF) attacks on PWS and log a user into an arbitrary account by leveraging lack of CSRF checks. |
| CVE-2015-5058 | Memory leak in the virtual server component in F5 Big-IP LTM, AAM, AFM, Analytics, APM, ASM, GTM, Link Controller, and PEM 11.5.x before 11.5.1 HF10, 11.5.3 before HF1, and 11.6.0 before HF5, BIG-IQ Cloud, Device, and Security 4.4.0 through 4.5.0, and BIG-IQ ADC 4.5.0 allows remote attackers to cause a denial of service (memory consumption) via a large number of crafted ICMP packets. |
| CVE-2015-5051 | IBM Maximo Asset Management 7.5 before 7.5.0.8 IF6 and 7.6 before 7.6.0.2 IF1 and Maximo Asset Management 7.5 before 7.5.0.8 IF6, 7.5.1, and 7.6 before 7.6.0.2 IF1 for SmartCloud Control Desk allow remote authenticated users to bypass intended access restrictions on query results via unspecified vectors. |
| CVE-2015-5017 | IBM Maximo Asset Management 7.1 through 7.1.1.13, 7.5.0 before 7.5.0.8 IFIX005, and 7.6.0 before 7.6.0.2 IFIX002; Maximo Asset Management 7.5.0 before 7.5.0.8 IFIX005, 7.5.1, and 7.6.0 before 7.6.0.2 IFIX002 for SmartCloud Control Desk; and Maximo Asset Management 7.1 through 7.1.1.13 and 7.2 for Tivoli IT Asset Management for IT and certain other products allow remote authenticated users to bypass intended access restrictions and establish a login session by entering an expired password. |
| CVE-2015-4967 | SQL injection vulnerability in IBM Maximo Asset Management 7.1 through 7.1.1.13, 7.5.0 before 7.5.0.8 IFIX004, and 7.6.0 before 7.6.0.1 IFIX002; Maximo Asset Management 7.5.x before 7.5.0.8 IFIX004 and 7.6.0 before 7.6.0.1 IFIX002 for SmartCloud Control Desk; and Maximo Asset Management 7.1 through 7.1.1.13 and 7.2 for Tivoli IT Asset Management for IT and certain other products allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2015-4966 | IBM Maximo Asset Management 7.1 through 7.1.1.13, 7.5.0 before 7.5.0.9 FP009, and 7.6.0 before 7.6.0.2 IFIX001; Maximo Asset Management 7.5.0 before 7.5.0.9 FP009, 7.5.1, and 7.6.0 before 7.6.0.2 IFIX001 for SmartCloud Control Desk; and Maximo Asset Management 7.1 through 7.1.1.13 and 7.2 for Tivoli IT Asset Management for IT and certain other products have a default administrator account, which makes it easier for remote authenticated users to obtain access via unspecified vectors. |
| CVE-2015-4965 | maximouiweb/webmodule/webclient/utility/merlin.jsp in IBM Maximo Asset Management 7.1 through 7.1.1.13, 7.5.0 before 7.5.0.8 IFIX004, and 7.6.0 before 7.6.0.1 IFIX002; Maximo Asset Management 7.5.x before 7.5.0.8 IFIX004 and 7.6.0 before 7.6.0.1 IFIX002 for SmartCloud Control Desk; and Maximo Asset Management 7.1 through 7.1.1.13 and 7.2 for Tivoli IT Asset Management for IT and certain other products allows remote authenticated users to obtain sensitive information by reading a (1) backup or (2) debug application file. |
| CVE-2015-4944 | Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management 7.1 through 7.1.1.13, 7.5.0 before 7.5.0.8 IFIX003, and 7.6.0 before 7.6.0.1 IFIX001; Maximo Asset Management 7.5.x before 7.5.0.8 IFIX003 and 7.6.0 before 7.6.0.1 IFIX001 for SmartCloud Control Desk; and Maximo Asset Management 7.1 through 7.1.1.13 and 7.2 for Tivoli IT Asset Management for IT and certain other products allows remote authenticated users to inject arbitrary web script or HTML via a crafted URL. |
| CVE-2015-4637 | The REST API in F5 BIG-IQ Cloud, Device, and Security 4.4.0 and 4.5.0 before HF2 and ADC 4.5.0 before HF2, when configured for LDAP remote authentication and the LDAP server allows anonymous BIND operations, allows remote attackers to obtain an authentication token for arbitrary users by guessing an LDAP user account name. |
| CVE-2015-4190 | Cisco Cloud Portal in Cisco Prime Service Catalog 9.4.1_vortex on Cloud Portal appliances allows man-in-the-middle attackers to modify data via unspecified vectors, aka Bug ID CSCuh19683. |
| CVE-2015-4017 | Salt before 2014.7.6 does not verify certificates when connecting via the aliyun, proxmox, and splunk modules. |
| CVE-2015-3904 | Multiple cross-site scripting (XSS) vulnerabilities in roomcloud.php in the Roomcloud plugin before 1.3 for WordPress allow remote attackers to inject arbitrary web script or HTML via the (1) pin, (2) start_day, (3) start_month, (4) start_year, (5) end_day, (6) end_month, (7) end_year, (8) lang, (9) adults, or (10) children parameter. |
| CVE-2015-3782 | CloudKit in Apple iOS before 8.4.1 and OS X before 10.10.5 allows attackers to access an iCloud user record associated with a previous user's login session via a crafted app. |
| CVE-2015-3628 | The iControl API in F5 BIG-IP LTM, AFM, Analytics, APM, ASM, Link Controller, and PEM 11.3.0 before 11.5.3 HF2 and 11.6.0 before 11.6.0 HF6, BIG-IP AAM 11.4.0 before 11.5.3 HF2 and 11.6.0 before 11.6.0 HF6, BIG-IP Edge Gateway, WebAccelerator, and WOM 11.3.0, BIG-IP GTM 11.3.0 before 11.6.0 HF6, BIG-IP PSM 11.3.0 through 11.4.1, Enterprise Manager 3.1.0 through 3.1.1, BIG-IQ Cloud and Security 4.0.0 through 4.5.0, BIG-IQ Device 4.2.0 through 4.5.0, and BIG-IQ ADC 4.5.0 allows remote authenticated users with the "Resource Administrator" role to gain privileges via an iCall (1) script or (2) handler in a SOAP request to iControl/iControlPortal.cgi. |
| CVE-2015-3348 | Cross-site scripting (XSS) vulnerability in the Cloudwords for Multilingual Drupal module before 7.x-2.3 for Drupal allows remote authenticated users to inject arbitrary web script or HTML via a node title. |
| CVE-2015-3347 | Cross-site request forgery (CSRF) vulnerability in the Cloudwords for Multilingual Drupal module before 7.x-2.3 for Drupal allows remote attackers to hijack the authentication of unspecified victims via an unknown menu callback. |
| CVE-2015-3252 | Apache CloudStack before 4.5.2 does not properly preserve VNC passwords when migrating KVM virtual machines, which allows remote attackers to gain access by connecting to the VNC server. |
| CVE-2015-3251 | Apache CloudStack before 4.5.2 might allow remote authenticated administrators to obtain sensitive password information for root accounts of virtual machines via unspecified vectors related to API calls. |
| CVE-2015-3229 | fedora-cloud-atomic.ks in spin-kickstarts allows remote attackers to conduct man-in-the-middle attacks by leveraging use of HTTP to download Fedora Atomic updates. |
| CVE-2015-3191 | With Cloud Foundry Runtime cf-release versions v209 or earlier, UAA Standalone versions 2.2.6 or earlier and Pivotal Cloud Foundry Runtime 1.4.5 or earlier the change_email form in UAA is vulnerable to a CSRF attack. This allows an attacker to trigger an e-mail change for a user logged into a cloud foundry instance via a malicious link on a attacker controlled site. This vulnerability is applicable only when using the UAA internal user store for authentication. Deployments enabled for integration via SAML or LDAP are not affected. |
| CVE-2015-3190 | With Cloud Foundry Runtime cf-release versions v209 or earlier, UAA Standalone versions 2.2.6 or earlier and Pivotal Cloud Foundry Runtime 1.4.5 or earlier the UAA logout link is susceptible to an open redirect which allows an attacker to insert malicious web page as a redirect parameter. |
| CVE-2015-3189 | With Cloud Foundry Runtime cf-release versions v208 or earlier, UAA Standalone versions 2.2.5 or earlier and Pivotal Cloud Foundry Runtime 1.4.5 or earlier, old Password Reset Links are not expired after the user changes their current email address to a new one. This vulnerability is applicable only when using the UAA internal user store for authentication. Deployments enabled for integration via SAML or LDAP are not affected. |
| CVE-2015-3011 | Multiple cross-site scripting (XSS) vulnerabilities in the contacts application in ownCloud Server Community Edition before 5.0.19, 6.x before 6.0.7, and 7.x before 7.0.5 allow remote authenticated users to inject arbitrary web script or HTML via a crafted contact. |
| CVE-2015-2883 | Philips In.Sight B120/37 has XSS, related to the Weaved cloud web service, as demonstrated by the name parameter to deviceSettings.php or shareDevice.php. |
| CVE-2015-2851 | client_chown in the sync client in Synology Cloud Station 1.1-2291 through 3.1-3320 on OS X allows local users to change the ownership of arbitrary files, and consequently obtain root access, by specifying a filename. |
| CVE-2015-2789 | Unquoted Windows search path vulnerability in the Foxit Cloud Safe Update Service in the Cloud plugin in Foxit Reader 6.1 through 7.0.6.1126 allows local users to gain privileges via a Trojan horse program in the %SYSTEMDRIVE% folder. |
| CVE-2015-1834 | A path traversal vulnerability was identified in the Cloud Foundry component Cloud Controller that affects cf-release versions prior to v208 and Pivotal Cloud Foundry Elastic Runtime versions prior to 1.4.2. Path traversal is the 'outbreak' of a given directory structure through relative file paths in the user input. It aims at accessing files and directories that are stored outside the web root folder, for disallowed reading or even executing arbitrary system commands. An attacker could use a certain parameter of the file path for instance to inject '../' sequences in order to navigate through the file system. In this particular case a remote authenticated attacker can exploit the identified vulnerability in order to upload arbitrary files to the server running a Cloud Controller instance - outside the isolated application container. |
| CVE-2015-1516 | Cross-site scripting (XSS) vulnerability in Polycom RealPresence CloudAXIS Suite before 1.7.0 allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2015-10105 | A vulnerability, which was classified as critical, was found in IP Blacklist Cloud Plugin up to 3.42 on WordPress. This affects the function valid_js_identifier of the file ip_blacklist_cloud.php of the component CSV File Import. The manipulation of the argument filename leads to path traversal. It is possible to initiate the attack remotely. Upgrading to version 3.43 is able to address this issue. The identifier of the patch is 6e6fe8c6fda7cbc252eef083105e08d759c07312. It is recommended to upgrade the affected component. The identifier VDB-227757 was assigned to this vulnerability. |
| CVE-2015-0689 | Cisco Cloud Web Security before 3.0.1.7 allows remote attackers to bypass intended filtering protection mechanisms by leveraging improper handling of HTTP methods, aka Bug ID CSCut69743. |
| CVE-2015-0674 | Cross-site scripting (XSS) vulnerability in the Alert Service of Cisco Cloud Web Security base revision allows remote attackers to inject arbitrary web script or HTML via unspecified parameters. |
| CVE-2015-0645 | The Layer 4 Redirect (L4R) feature in Cisco IOS XE 2.x and 3.x before 3.10.4S, 3.11 before 3.11.3S, 3.12 before 3.12.2S, 3.13 before 3.13.1S, 3.14 before 3.14.0S, and 3.15 before 3.15.0S allows remote attackers to cause a denial of service (device reload) via malformed (1) IPv4 or (2) IPv6 packets, aka Bug ID CSCuq59131. |
| CVE-2015-0644 | AppNav in Cisco IOS XE 3.8 through 3.10 before 3.10.3S, 3.11 before 3.11.3S, 3.12 before 3.12.1S, 3.13 before 3.13.0S, 3.14 before 3.14.0S, and 3.15 before 3.15.0S allows remote attackers to execute arbitrary code or cause a denial of service (device reload) via a crafted TCP packet, aka Bug ID CSCuo53622. |
| CVE-2015-0641 | Cisco IOS XE 2.x and 3.x before 3.9.0S, 3.10 before 3.10.0S, 3.11 before 3.11.0S, 3.12 before 3.12.0S, 3.13 before 3.13.0S, 3.14 before 3.14.0S, and 3.15 before 3.15.0S allows remote attackers to cause a denial of service (device reload) via crafted IPv6 packets, aka Bug ID CSCub68073. |
| CVE-2015-0640 | The high-speed logging (HSL) feature in Cisco IOS XE 2.x and 3.x before 3.10.4S, 3.11 before 3.11.3S, 3.12 before 3.12.1S, 3.13 before 3.13.0S, 3.14 before 3.14.0S, and 3.15 before 3.15.0S allows remote attackers to cause a denial of service (device reload) via large IP packets that require NAT and HSL processing after fragmentation, aka Bug ID CSCuo25741. |
| CVE-2015-0639 | The Common Flow Table (CFT) feature in Cisco IOS XE 3.6 and 3.7 before 3.7.1S, 3.8 before 3.8.0S, 3.9 before 3.9.0S, 3.10 before 3.10.0S, 3.11 before 3.11.0S, 3.12 before 3.12.0S, 3.13 before 3.13.0S, 3.14 before 3.14.0S, and 3.15 before 3.15.0S, when MMON or NBAR is enabled, allows remote attackers to cause a denial of service (device reload) via malformed IPv6 packets with IPv4 UDP encapsulation, aka Bug ID CSCua79665. |
| CVE-2015-0440 | Unspecified vulnerability in the Oracle Knowledge component in Oracle Right Now Service Cloud 8.2.3.10.1 and 8.4.7.2 allows remote attackers to affect integrity via unknown vectors related to Information Manager Console. |
| CVE-2014-9921 | Information disclosure vulnerability in McAfee (now Intel Security) Cloud Analysis and Deconstructive Services (CADS) 1.0.0.3x, 1.0.0.4d and earlier allows remote unauthenticated users to view, add, and remove users via a configuration error. |
| CVE-2014-9645 | The add_probe function in modutils/modprobe.c in BusyBox before 1.23.0 allows local users to bypass intended restrictions on loading kernel modules via a / (slash) character in a module name, as demonstrated by an "ifconfig /usbserial up" command or a "mount -t /snd_pcm none /" command. |
| CVE-2014-9619 | Unrestricted file upload vulnerability in webadmin/ajaxfilemanager/ajaxfilemanager.php in Netsweeper before 3.1.10, 4.0.x before 4.0.9, and 4.1.x before 4.1.2 allows remote authenticated users with admin privileges on the Cloud Manager web console to execute arbitrary PHP code by uploading a file with a double extension, then accessing it via a direct request to the file in webadmin/deny/images/, as demonstrated by secuid0.php.gif. |
| CVE-2014-9593 | Apache CloudStack before 4.3.2 and 4.4.x before 4.4.2 allows remote attackers to obtain private keys via a listSslCerts API call. |
| CVE-2014-9049 | The documents application in ownCloud Server 6.x before 6.0.6 and 7.x before 7.0.3 allows remote authenticated users to obtain all valid session IDs via an unspecified API method. |
| CVE-2014-9048 | The documents application in ownCloud Server 6.x before 6.0.6 and 7.x before 7.0.3 allows remote attackers to bypass the password-protection for shared files via the API. |
| CVE-2014-9047 | Multiple unspecified vulnerabilities in the preview system in ownCloud 6.x before 6.0.6 and 7.x before 7.0.3 allow remote attackers to read arbitrary files via unknown vectors. |
| CVE-2014-9046 | The OC_Util::getUrlContent function in ownCloud Server before 5.0.18, 6.x before 6.0.6, and 7.x before 7.0.3 allows remote attackers to read arbitrary files via a file:// protocol. |
| CVE-2014-9045 | The FTP backend in user_external in ownCloud Server before 5.0.18 and 6.x before 6.0.6 allows remote attackers to bypass intended authentication requirements via a crafted password. |
| CVE-2014-9044 | Asset Pipeline in ownCloud 7.x before 7.0.3 uses an MD5 hash of the absolute file paths of the original CSS and JS files as the name of the concatenated file, which allows remote attackers to obtain sensitive information via a brute force attack. |
| CVE-2014-9043 | The user_ldap (aka LDAP user and group backend) application in ownCloud before 5.0.18, 6.x before 6.0.6, and 7.x before 7.0.3 allows remote attackers to bypass authentication via a null byte in the password and a valid user name, which triggers an unauthenticated bind. |
| CVE-2014-9042 | Cross-site scripting (XSS) vulnerability in the import functionality in the bookmarks application in ownCloud before 5.0.18, 6.x before 6.0.6, and 7.x before 7.0.3 allows remote authenticated users to inject arbitrary web script or HTML by importing a link with an unspecified protocol. NOTE: this can be leveraged by remote attackers using CVE-2014-9041. |
| CVE-2014-9041 | The import functionality in the bookmarks application in ownCloud server before 5.0.18, 6.x before 6.0.6, and 7.x before 7.0.3 does not validate CSRF tokens, which allow remote attackers to conduct CSRF attacks. |
| CVE-2014-8730 | The SSL profiles component in F5 BIG-IP LTM, APM, and ASM 10.0.0 through 10.2.4 and 11.0.0 through 11.5.1, AAM 11.4.0 through 11.5.1, AFM 11.3.0 through 11.5.1, Analytics 11.0.0 through 11.5.1, Edge Gateway, WebAccelerator, and WOM 10.1.0 through 10.2.4 and 11.0.0 through 11.3.0, PEM 11.3.0 through 11.6.0, and PSM 10.0.0 through 10.2.4 and 11.0.0 through 11.4.1 and BIG-IQ Cloud and Security 4.0.0 through 4.4.0 and Device 4.2.0 through 4.4.0, when using TLS 1.x before TLS 1.2, does not properly check CBC padding bytes when terminating connections, which makes it easier for man-in-the-middle attackers to obtain cleartext data via a padding-oracle attack, a variant of CVE-2014-3566 (aka POODLE). NOTE: the scope of this identifier is limited to the F5 implementation only. Other vulnerable implementations should receive their own CVE ID, since this is not a vulnerability within the design of TLS 1.x itself. |
| CVE-2014-8474 | CA Cloud Service Management (CSM) before Summer 2014 allows remote attackers to read arbitrary files, send HTTP requests to intranet servers, or cause a denial of service (CPU and memory consumption) via an XML document containing an external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue. |
| CVE-2014-8473 | Cross-site request forgery (CSRF) vulnerability in CA Cloud Service Management (CSM) before Summer 2014 allows remote attackers to hijack the authentication of unspecified victims via unknown vectors. |
| CVE-2014-8472 | CA Cloud Service Management (CSM) before Summer 2014 does not properly verify authentication tokens from an Identity Provider, which allows user-assisted remote attackers to bypass intended access restrictions via unspecified vectors. |
| CVE-2014-8471 | CA Cloud Service Management (CSM) before Summer 2014 allows remote attackers to conduct replay attacks via unspecified vectors. |
| CVE-2014-7994 | Cisco-Meraki MS, MR, and MX devices with firmware before 2014-09-24 allow remote attackers to execute arbitrary commands by leveraging knowledge of a cross-device secret and a per-device secret, and sending a request to an unspecified HTTP handler on the local network, aka Cisco-Meraki defect ID 00301991. |
| CVE-2014-7993 | Cisco-Meraki MS, MR, and MX devices with firmware before 2014-09-24 allow remote attackers to obtain sensitive credential information by leveraging unspecified HTTP handler access on the local network, aka Cisco-Meraki defect ID 00302012. |
| CVE-2014-7878 | The Application Lifecycle Service (ALS) in HP Helion Cloud Development Platform 1.0, when a virtual machine is derived from the Seed Node image, uses the same security keys across different customers' installations, which allows remote attackers to execute arbitrary code by leveraging these keys for a connection. |
| CVE-2014-7814 | SQL injection vulnerability in Red Hat CloudForms 3.1 Management Engine (CFME) 5.3 allows remote authenticated users to execute arbitrary SQL commands via a crafted REST API request to an SQL filter. |
| CVE-2014-7807 | Apache CloudStack 4.3.x before 4.3.2 and 4.4.x before 4.4.2 allows remote attackers to bypass authentication via a login request without a password, which triggers an unauthenticated bind. |
| CVE-2014-7560 | The Fabasoft Cloud (aka com.fabasoft.android.cmis.folio_cloud) application 3.0.1 for Android does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate. |
| CVE-2014-7180 | Electric Cloud ElectricCommander before 4.2.6 and 5.x before 5.0.3 uses world-writable permissions for (1) eccert.pl and (2) ecconfigure.pl, which allows local users to execute arbitrary Perl code by modifying these files. |
| CVE-2014-5876 | The WD My Cloud (aka com.wdc.wd2go) application 4.0.0 for Android does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate. |
| CVE-2014-5811 | The ZOOM Cloud Meetings (aka us.zoom.videomeetings) application @7F060008 for Android does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate. |
| CVE-2014-5791 | The Daum Cloud (aka net.daum.android.cloud) application 1.6.18 for Android does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate. |
| CVE-2014-5659 | The ASTRO File Manager with Cloud (aka com.metago.astro) application ASTRO-4.4.592 for Android does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate. |
| CVE-2014-5641 | The Cloud Manager (aka com.ileaf.cloud_manager) application 1.6 for Android does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate. |
| CVE-2014-5640 | The CM Backup -Restore,Cloud,Photo (aka com.ijinshan.kbackup) application 1.1.0.135 for Android does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate. |
| CVE-2014-5636 | The Cloud Browser (aka com.granitamalta.cloudbrowser) application 2.2.1 for Android does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate. |
| CVE-2014-5341 | The SFTP external storage driver (files_external) in ownCloud Server before 6.0.5 validates the RSA Host key after login, which allows remote attackers to obtain sensitive information by sniffing the network. |
| CVE-2014-5038 | Eucalyptus 3.0.0 through 4.0.1, when the log level is set to DEBUG or lower, logs user and system passwords, which allows local users to obtain sensitive information by reading the cloud log files. |
| CVE-2014-5037 | Eucalyptus 4.0.0 through 4.0.1, when the log level is set to INFO, logs user and system passwords, which allows local users to obtain sensitive information by reading cloud-requests.log. |
| CVE-2014-4929 | Directory traversal vulnerability in the routing component in ownCloud Server before 5.0.17 and 6.0.x before 6.0.4 allows remote attackers to include and execute arbitrary local files via a .. (dot dot) in a filename, related to index.php. |
| CVE-2014-4765 | IBM Maximo Asset Management 7.1 through 7.1.1.13 and 7.5 through 7.5.0.6, Maximo Asset Management 7.5.0 through 7.5.0.3 and 7.5.1 through 7.5.1.2 for SmartCloud Control Desk, and Maximo Asset Management 7.1 and 7.2 for Tivoli IT Asset Management for IT and certain other products allow remote attackers to obtain sensitive directory information by reading an unspecified error message. |
| CVE-2014-3692 | The customization template in Red Hat CloudForms 3.1 Management Engine (CFME) 5.3 uses a default password for the root account when a password is not specified for a new image, which allows remote attackers to gain privileges. |
| CVE-2014-3681 | Cross-site scripting (XSS) vulnerability in Jenkins before 1.583 and LTS before 1.565.3 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2014-3680 | Jenkins before 1.583 and LTS before 1.565.3 allows remote authenticated users with the Job/READ permission to obtain the default value for the password field of a parameterized job by reading the DOM. |
| CVE-2014-3679 | The Monitoring plugin before 1.53.0 for Jenkins allows remote attackers to obtain sensitive information by accessing unspecified pages. |
| CVE-2014-3678 | Cross-site scripting (XSS) vulnerability in the Monitoring plugin before 1.53.0 for Jenkins allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2014-3667 | Jenkins before 1.583 and LTS before 1.565.3 does not properly prevent downloading of plugins, which allows remote authenticated users with the Overall/READ permission to obtain sensitive information by reading the plugin code. |
| CVE-2014-3666 | Jenkins before 1.583 and LTS before 1.565.3 allows remote attackers to execute arbitrary code via a crafted packet to the CLI channel. |
| CVE-2014-3664 | Directory traversal vulnerability in Jenkins before 1.583 and LTS before 1.565.3 allows remote authenticated users with the Overall/READ permission to read arbitrary files via unspecified vectors. |
| CVE-2014-3663 | Jenkins before 1.583 and LTS before 1.565.3 allows remote authenticated users with the Job/CONFIGURE permission to bypass intended restrictions and create or destroy arbitrary jobs via unspecified vectors. |
| CVE-2014-3662 | Jenkins before 1.583 and LTS before 1.565.3 allows remote attackers to enumerate user names via vectors related to login attempts. |
| CVE-2014-3661 | Jenkins before 1.583 and LTS before 1.565.3 allows remote attackers to cause a denial of service (thread consumption) via vectors related to a CLI handshake. |
| CVE-2014-3642 | vmdb/app/controllers/application_controller/performance.rb in Red Hat CloudForms 3.1 Management Engine (CFME) before 5.3 allows remote authenticated users to gain privileges via unspecified vectors, related to an "insecure send method." |
| CVE-2014-3563 | Multiple unspecified vulnerabilities in Salt (aka SaltStack) before 2014.1.10 allow local users to have an unspecified impact via vectors related to temporary file creation in (1) seed.py, (2) salt-ssh, or (3) salt-cloud. |
| CVE-2014-3489 | lib/util/miq-password.rb in Red Hat CloudForms 3.0 Management Engine (CFME) before 5.2.4.2 uses a hard-coded salt, which makes it easier for remote attackers to guess passwords via a brute force attack. |
| CVE-2014-3486 | The (1) shell_exec function in lib/util/MiqSshUtilV1.rb and (2) temp_cmd_file function in lib/util/MiqSshUtilV2.rb in Red Hat CloudForms 3.0 Management Engine (CFME) before 5.2.4.2 allow local users to execute arbitrary commands via a symlink attack on a temporary file with a predictable name. |
| CVE-2014-3367 | Cross-site scripting (XSS) vulnerability in the vCloud Director component in Cisco Nexus 1000V InterCloud for VMware allows remote attackers to inject arbitrary web script or HTML via an unspecified value, aka Bug ID CSCuq90524. |
| CVE-2014-3352 | Cisco Intelligent Automation for Cloud (aka Cisco Cloud Portal) 2008.3_SP9 and earlier does not properly consider whether a session is a problematic NULL session, which allows remote attackers to obtain sensitive information via crafted packets, related to an "iFrame vulnerability," aka Bug ID CSCuh84801. |
| CVE-2014-3351 | Cisco Intelligent Automation for Cloud (aka Cisco Cloud Portal) does not properly consider whether a session is a problematic NULL session, which allows remote attackers to obtain sensitive information via crafted packets, aka Bug IDs CSCuh87398 and CSCuh87380. |
| CVE-2014-3350 | Cisco Intelligent Automation for Cloud (aka Cisco Cloud Portal) does not properly implement URL redirection, which allows remote authenticated users to obtain sensitive information via a crafted URL, aka Bug ID CSCuh84870. |
| CVE-2014-3349 | Cisco Intelligent Automation for Cloud (aka Cisco Cloud Portal) does not validate file types during the handling of file submission, which allows remote authenticated users to upload arbitrary files via a crafted request, aka Bug ID CSCuh87410. |
| CVE-2014-3298 | Form Data Viewer in Cisco Intelligent Automation for Cloud in Cisco Cloud Portal places passwords in form data, which allows remote authenticated users to obtain sensitive information by reading HTML source code, aka Bug ID CSCui36976. |
| CVE-2014-3297 | Cisco Intelligent Automation for Cloud in Cisco Cloud Portal does not properly restrict the content of MyServices action URLs, which allows remote authenticated users to obtain sensitive information by reading (1) web-server access logs, (2) web-server Referer logs, or (3) the browser history, aka Bug IDs CSCui36937, CSCui37004, and CSCui36927. |
| CVE-2014-3220 | F5 BIG-IQ Cloud and Security 4.0.0 through 4.1.0 allows remote authenticated users to change the password of arbitrary users via the name parameter in a request to the user's page in mgmt/shared/authz/users/. |
| CVE-2014-3084 | IBM Maximo Asset Management 6.1 through 6.5, 7.1 through 7.1.1.13, and 7.5 through 7.5.0.6; Maximo Asset Management 7.5.0 through 7.5.0.3 and 7.5.1 through 7.5.1.2 for SmartCloud Control Desk; and Maximo Asset Management 6.2.8, 7.1, and 7.2 for Tivoli IT Asset Management for IT and certain other products allow remote authenticated users to bypass intended write-access restrictions on calendar entries via unspecified vectors. |
| CVE-2014-3025 | Multiple cross-site scripting (XSS) vulnerabilities in IBM Maximo Asset Management 6.2 through 6.2.8, 6.x and 7.1 through 7.1.1.2, and 7.5 through 7.5.0.6; Maximo Asset Management 7.5 through 7.5.0.3 and 7.5.1 through 7.5.1.2 for SmartCloud Control Desk; and Maximo Asset Management 6.2 through 6.2.8, 7.1 through 7.1.1.2, and 7.2 for Tivoli Asset Management for IT and certain other products allow remote authenticated users to inject arbitrary web script or HTML via unspecified input to a .jsp file under webclient/utility/. |
| CVE-2014-3024 | Cross-site request forgery (CSRF) vulnerability in IBM Maximo Asset Management 7.1 through 7.1.1.12 and 7.5 through 7.5.0.6 and Maximo Asset Management 7.5.0 through 7.5.0.3 and 7.5.1 through 7.5.1.2 for SmartCloud Control Desk allows remote authenticated users to hijack the authentication of arbitrary users. |
| CVE-2014-2928 | The iControl API in F5 BIG-IP LTM, APM, ASM, GTM, Link Controller, and PSM 10.0.0 through 10.2.4 and 11.0.0 through 11.5.1, BIG-IP AAM 11.4.0 through 11.5.1, BIG-IP AFM and PEM 11.3.0 through 11.5.1, BIG-IP Analytics 11.0.0 through 11.5.1, BIG-IP Edge Gateway, WebAccelerator, WOM 10.1.0 through 10.2.4 and 11.0.0 through 11.3.0, Enterprise Manager 2.1.0 through 2.3.0 and 3.0.0 through 3.1.1, and BIG-IQ Cloud, Device, and Security 4.0.0 through 4.3.0 allows remote administrators to execute arbitrary commands via shell metacharacters in the hostname element in a SOAP request. |
| CVE-2014-2588 | Directory traversal vulnerability in servlet/downloadReport in McAfee Asset Manager 6.6 allows remote authenticated users to read arbitrary files via a .. (dot dot) in the reportFileName parameter. |
| CVE-2014-2587 | SQL injection vulnerability in jsp/reports/ReportsAudit.jsp in McAfee Asset Manager 6.6 allows remote authenticated users to execute arbitrary SQL commands via the username of an audit report (aka user parameter). |
| CVE-2014-2586 | Cross-site scripting (XSS) vulnerability in the login audit form in McAfee Cloud Single Sign On (SSO) allows remote attackers to inject arbitrary web script or HTML via a crafted password. |
| CVE-2014-2536 | Directory traversal vulnerability in McAfee Cloud Identity Manager 3.0, 3.1, and 3.5.1, McAfee Cloud Single Sign On (MCSSO) before 4.0.1, and Intel Expressway Cloud Access 360-SSO 2.1 and 2.5 allows remote authenticated users to read an unspecified file containing a hash of the administrator password via unknown vectors. |
| CVE-2014-2068 | The doIndex function in hudson/util/RemotingDiagnostics.java in CloudBees Jenkins before 1.551 and LTS before 1.532.2 allows remote authenticated users with the ADMINISTER permission to obtain sensitive information via vectors related to heapDump. |
| CVE-2014-2067 | Cross-site scripting (XSS) vulnerability in java/hudson/model/Cause.java in Jenkins before 1.551 and LTS before 1.532.2 allows remote authenticated users to inject arbitrary web script or HTML via a "remote cause note." |
| CVE-2014-2066 | Session fixation vulnerability in Jenkins before 1.551 and LTS before 1.532.2 allows remote attackers to hijack web sessions via vectors involving the "override" of Jenkins cookies. |
| CVE-2014-2065 | Cross-site scripting (XSS) vulnerability in Jenkins before 1.551 and LTS before 1.532.2 allows remote attackers to inject arbitrary web script or HTML via the iconSize cookie. |
| CVE-2014-2064 | The loadUserByUsername function in hudson/security/HudsonPrivateSecurityRealm.java in Jenkins before 1.551 and LTS before 1.532.2 allows remote attackers to determine whether a user exists via vectors related to failed login attempts. |
| CVE-2014-2063 | Jenkins before 1.551 and LTS before 1.532.2 allows remote attackers to conduct clickjacking attacks via unspecified vectors. |
| CVE-2014-2062 | Jenkins before 1.551 and LTS before 1.532.2 does not invalidate the API token when a user is deleted, which allows remote authenticated users to retain access via the token. |
| CVE-2014-2061 | The input control in PasswordParameterDefinition in Jenkins before 1.551 and LTS before 1.532.2 allows remote attackers to obtain passwords by reading the HTML source code, related to the default value. |
| CVE-2014-2060 | The Winstone servlet container in Jenkins before 1.551 and LTS before 1.532.2 allows remote attackers to hijack sessions via unspecified vectors. |
| CVE-2014-2059 | Directory traversal vulnerability in the CLI job creation (hudson/cli/CreateJobCommand.java) in Jenkins before 1.551 and LTS before 1.532.2 allows remote authenticated users to overwrite arbitrary files via the job name. |
| CVE-2014-2058 | BuildTrigger in Jenkins before 1.551 and LTS before 1.532.2 allows remote authenticated users to bypass access restrictions and execute arbitrary jobs by configuring a job to trigger another job. NOTE: this vulnerability exists because of an incomplete fix for CVE-2013-7330. |
| CVE-2014-2047 | Session fixation vulnerability in ownCloud before 6.0.2, when PHP is configured to accept session parameters through a GET request, allows remote attackers to hijack web sessions via unspecified vectors. |
| CVE-2014-1449 | The Maxthon Cloud Browser application before 4.1.6.2000 for Android allows remote attackers to spoof the address bar via crafted JavaScript code that uses the history API. |
| CVE-2014-0915 | Multiple cross-site scripting (XSS) vulnerabilities in IBM Maximo Asset Management 6.2 through 6.2.8, 6.x and 7.1 through 7.1.1.2, and 7.5 through 7.5.0.6; Maximo Asset Management 7.5 through 7.5.0.3 and 7.5.1 through 7.5.1.2 for SmartCloud Control Desk; and Maximo Asset Management 6.2 through 6.2.8, 7.1 through 7.1.1.2, and 7.2 for Tivoli Asset Management for IT and certain other products allow remote authenticated users to inject arbitrary web script or HTML via (1) the KPI display name field or (2) a portlet field. |
| CVE-2014-0914 | Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management 6.2 through 6.2.8 and 6.x and 7.x through 7.5.0.6, Maximo Asset Management 7.5 through 7.5.0.3 and 7.5.1 through 7.5.1.2 for SmartCloud Control Desk, and Maximo Asset Management 6.2 through 6.2.8 for Tivoli IT Asset Management for IT and Maximo Service Desk allows remote authenticated users to inject arbitrary web script or HTML via the Query Description Field. |
| CVE-2014-0893 | Cross-site scripting (XSS) vulnerability in customreport.jsp in IBM Maximo Asset Management 7.5.x before 7.5.0.5 IFIX006 and SmartCloud Control Desk 7.x before 7.5.0.3 and 7.5.1.x before 7.5.1.2 allows remote authenticated users to inject arbitrary web script or HTML via unspecified parameters. |
| CVE-2014-0875 | Active Cloud Engine (ACE) in IBM Storwize V7000 Unified 1.3.0.0 through 1.4.3.x allows remote attackers to bypass intended ACL restrictions in opportunistic circumstances by leveraging incorrect ACL synchronization over an unreliable NFS connection that requires retransmissions. |
| CVE-2014-0849 | IBM Maximo Asset Management 7.x before 7.5.0.3 IFIX027 and SmartCloud Control Desk 7.x before 7.5.0.3 and 7.5.1.x before 7.5.1.2 allow remote authenticated users to gain privileges by leveraging membership in two security groups. |
| CVE-2014-0825 | Cross-site scripting (XSS) vulnerability in openreport.jsp in IBM Maximo Asset Management 7.x before 7.1.1.12 IFIX.20140321-1336 and 7.5.x before 7.5.0.5 IFIX006; SmartCloud Control Desk 7.x before 7.5.0.3 and 7.5.1.x before 7.5.1.2; and Tivoli IT Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB) 7.x before 7.1.1.12 IFIX.20140218-1510 allows remote authenticated users to inject arbitrary web script or HTML via a crafted report parameter. |
| CVE-2014-0694 | Intelligent Automation for Cloud (IAC) in Cisco Cloud Portal 9.4.1 and earlier includes a cryptographic key in binary files, which makes it easier for remote attackers to obtain cleartext data from an arbitrary IAC installation by leveraging knowledge of this key, aka Bug IDs CSCui34764, CSCui34772, CSCui34776, CSCui34798, CSCui34800, CSCui34805, CSCui34809, CSCui34810, CSCui34813, CSCui34814, and CSCui34818. |
| CVE-2014-0685 | Cisco Nexus 1000V InterCloud 5.2(1)IC1(1.2) and earlier for VMware allows remote attackers to bypass ACL deny statements via crafted (1) IGMPv2 or (2) IGMPv3 packets, aka Bug ID CSCug61691. |
| CVE-2014-0645 | EMC Cloud Tiering Appliance (CTA) 9.x through 10 SP1 and File Management Appliance (FMA) 7.x store DES password hashes for the root, super, and admin accounts, which makes it easier for context-dependent attackers to obtain sensitive information via a brute-force attack. |
| CVE-2014-0644 | EMC Cloud Tiering Appliance (CTA) 10 through SP1 allows remote attackers to read arbitrary files via an api/login request containing an XML external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue, as demonstrated by reading the /etc/shadow file. |
| CVE-2014-0592 | Barclamp (aka barclamp-network) 1.7 for the Crowbar Framework, as used in SUSE Cloud 3, does not enable netfilter on bridges when creating new instances, which allows remote attackers to bypass security group restrictions via unspecified vectors, related to floating IPs. |
| CVE-2014-0184 | Red Hat CloudForms 3.0 Management Engine (CFME) before 5.2.4.2 logs the root password when deploying a VM, which allows local users to obtain sensitive information by reading the evm.log file. |
| CVE-2014-0180 | The wait_for_task function in app/controllers/application_controller.rb in Red Hat CloudForms 3.0 Management Engine (CFME) before 5.2.4.2 allows remote attackers to cause a denial of service (infinite loop and CPU consumption) via unspecified vectors. |
| CVE-2014-0176 | Cross-site scripting (XSS) vulnerability in application/panel_control in CloudForms 3.0 Management Engine (CFME) before 5.2.4.2 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2014-0140 | Red Hat CloudForms 3.1 Management Engine (CFME) before 5.3 allows remote authenticated users to access sensitive controllers and actions via a direct HTTP or HTTPS request. |
| CVE-2014-0136 | The (1) get and (2) log methods in the AgentController in Red Hat CloudForms 3.0 Management Engine (CFME) 5.x allow remote attackers to insert arbitrary text into log files via unspecified vectors. |
| CVE-2014-0057 | The x_button method in the ServiceController (vmdb/app/controllers/service_controller.rb) in Red Hat CloudForms 3.0 Management Engine 5.2 allows remote attackers to execute arbitrary methods via unspecified vectors. |
| CVE-2014-0031 | The (1) ListNetworkACL and (2) listNetworkACLLists APIs in Apache CloudStack before 4.2.1 allow remote authenticated users to list network ACLS for other users via a crafted request. |
| CVE-2013-7344 | Unspecified vulnerability in core/settings.php in ownCloud before 4.0.12 and 4.5.x before 4.5.6 allows remote authenticated users to execute arbitrary PHP code via unknown vectors. NOTE: this issue was SPLIT from CVE-2013-0303 due to different affected versions. |
| CVE-2013-7330 | Jenkins before 1.502 allows remote authenticated users to configure an otherwise restricted project via vectors related to post-build actions. |
| CVE-2013-6741 | IBM Maximo Asset Management 7.x before 7.1.1.7 LAFIX.20140319-0837 and 7.5.x before 7.5.0.5 IFIX006; SmartCloud Control Desk 7.x before 7.5.0.3 and 7.5.1.x before 7.5.1.2; and Tivoli IT Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB) 7.x before 7.1.1.7 LAFIX.20140319-0837 allow remote authenticated users to obtain potentially sensitive stack-trace information by triggering a Birt error. |
| CVE-2013-6738 | Cross-site scripting (XSS) vulnerability in IBM SmartCloud Analytics Log Analysis 1.1 and 1.2 before 1.2.0.0-CSI-SCALA-IF0003 allows remote attackers to inject arbitrary web script or HTML via an invalid query parameter in a response from an OAuth authorization endpoint. |
| CVE-2013-6708 | Cisco Cloud Portal 9.4 allows remote attackers to read files of unspecified types via a direct request, aka Bug IDs CSCuj08426 and CSCui60889. |
| CVE-2013-6403 | The admin page in ownCloud before 5.0.13 allows remote attackers to bypass intended access restrictions via unspecified vectors, related to MariaDB. |
| CVE-2013-6398 | The virtual router in Apache CloudStack before 4.2.1 does not preserve the source restrictions in firewall rules after being restarted, which allows remote attackers to bypass intended restrictions via a request. |
| CVE-2013-6374 | Cross-site scripting (XSS) vulnerability in the Build Failure Analyzer plugin before 1.5.1 for Jenkins allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2013-6373 | The Exclusion plugin before 0.9 for Jenkins does not properly prevent access to resource locks, which allows remote authenticated users to list and release resources via unspecified vectors. |
| CVE-2013-5573 | Cross-site scripting (XSS) vulnerability in the default markup formatter in Jenkins 1.523 allows remote attackers to inject arbitrary web script or HTML via the Description field in the user configuration. |
| CVE-2013-5465 | IBM Maximo Asset Management 7.x before 7.1.1.7 LAFIX.20140319-0837, 7.1.1.11 before IFIX.20140323-0749, 7.1.1.12 before IFIX.20140321-1336, 7.5.x before 7.5.0.3 IFIX027, and 7.5.0.4 before IFIX011; SmartCloud Control Desk 7.x before 7.5.0.3 and 7.5.1.x before 7.5.1.2; and Tivoli IT Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB) 7.x before 7.1.1.7 LAFIX.20140319-0837, 7.1.1.11 before IFIX.20140207-1801, and 7.1.1.12 before IFIX.20140218-1510 do not properly restrict file types during uploads, which allows remote authenticated users to have an unspecified impact via an invalid type. |
| CVE-2013-5464 | IBM Maximo Asset Management 7.5.x before 7.5.0.3 IFIX027, 7.5.0.4 before IFIX011, and 7.5.0.5 before IFIX006 and SmartCloud Control Desk 7.x before 7.5.0.3 and 7.5.1.x before 7.5.1.2 allow remote authenticated users to bypass intended access restrictions, and modify physical counts associated with restricted storerooms, via unspecified vectors. |
| CVE-2013-5460 | IBM Maximo Asset Management 7.x before 7.5.0.6 and SmartCloud Control Desk 7.x before 7.5.0.3 and 7.5.1.x before 7.5.1.2 allow remote authenticated users to bypass intended access restrictions, and read communication logs associated with unrelated records, via unspecified vectors. |
| CVE-2013-5455 | IBM SmartCloud Provisioning 2.1 before FP3 IF0001 allows remote authenticated users to modify virtual-system deployment via deployer.virtualsystems CLI commands, as demonstrated by a deletion using a deployer.virtualsystems[#].delete command. |
| CVE-2013-5402 | Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management, Maximo Asset Management Essentials, Maximo for Government, Maximo for Nuclear Power, Maximo for Transportation, Maximo for Life Sciences, Maximo for Oil and Gas, and Maximo for Utilities 7.1.x through 7.1.1.12, 7.1.2, 7.5 before 7.5.0.3 IFIX014, and 7.5.0.5 before IFIX003; SmartCloud Control Desk (SCCD) 7.5 before 7.5.0.3 IFIX014 and 7.5.0.5 before IFIX003; and Tivoli Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB) 7.1.x through 7.1.1.12, 7.1.2, and 7.2.x through 7.2.1 allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2013-5395 | IBM Maximo Asset Management 6.2 through 6.2.8, 7.1 before 7.1.1.12, and 7.5 before 7.5.0.5 allows remote attackers to bypass intended access restrictions via unspecified vectors. |
| CVE-2013-5383 | IBM Maximo Asset Management 6.2 through 6.2.8, 7.1 before 7.1.1.12, and 7.5 before 7.5.0.5 allows remote authenticated users to gain privileges via unspecified vectors, a different vulnerability than CVE-2013-5382. |
| CVE-2013-5382 | IBM Maximo Asset Management 6.2 through 6.2.8, 7.1 before 7.1.1.12, and 7.5 before 7.5.0.5 allows remote authenticated users to gain privileges via unspecified vectors, a different vulnerability than CVE-2013-5383. |
| CVE-2013-5381 | IBM Maximo Asset Management 6.2 through 6.2.8, 7.1 through 7.1.1.12, and 7.5 before 7.5.0.3 allows remote authenticated users to gain privileges via unspecified vectors. |
| CVE-2013-5380 | IBM Maximo Asset Management 6.2 through 6.2.8, 7.1 before 7.1.1.12, and 7.5 before 7.5.0.5 allows local users to obtain sensitive information via unspecified vectors. |
| CVE-2013-4937 | Multiple unspecified vulnerabilities in the AiCloud feature on the ASUS RT-AC66U, RT-N66U, RT-N65U, RT-N14U, RT-N16, RT-N56U, and DSL-N55U with firmware before 3.0.4.372 have unknown impact and attack vectors. |
| CVE-2013-4772 | D-Link DIR-505L SharePort Mobile Companion 1.01 and DIR-826L Wireless N600 Cloud Router 1.02 allows remote attackers to bypass authentication via a direct request when an authorized session is active. |
| CVE-2013-4769 | The cloud controller (aka CLC) component in Eucalyptus 3.3.x and 3.4.x before 3.4.2, when the dns.recursive.enabled setting is used, allows remote attackers to cause a denial of service (traffic amplification) via spoofed DNS queries. |
| CVE-2013-4768 | The web services APIs in Eucalyptus 2.0 through 3.4.1 allow remote attackers to cause a denial of service via vectors related to the "network connection clean up code" and (1) Cloud Controller (CLC), (2) Walrus, (3) Storage Controller (SC), and (4) VMware Broker (VB). |
| CVE-2013-4766 | The gather log service in Eucalyptus before 3.3.1 allows remote attackers to read log files via an unspecified request to the (1) Cluster Controller (CC) or (2) Node Controller (NC) component. |
| CVE-2013-4027 | IBM Maximo Asset Management 6.2 through 6.2.8, 7.1 through 7.1.1.12, and 7.5 before 7.5.0.5 allows remote authenticated users to bypass intended access restrictions via unspecified vectors. |
| CVE-2013-4021 | IBM Maximo Asset Management 6.2 through 6.2.8, 7.1 before 7.1.1.12, and 7.5 before 7.5.0.5 allows remote authenticated users to conduct unspecified file-inclusion attacks via unknown vectors. |
| CVE-2013-4020 | IBM Maximo Asset Management 6.2 through 6.2.8, 7.1 through 7.1.1.12, and 7.5 before 7.5.0.3 allows remote authenticated users to bypass intended access restrictions via unspecified vectors. |
| CVE-2013-4019 | Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management 6.2 through 6.2.8 and 7.1 before 7.1.1.12 allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2013-4018 | IBM Maximo Asset Management 6.2 through 6.2.8, 7.1 before 7.1.1.12, and 7.5 before 7.5.0.5 allows remote authenticated users to obtain sensitive information via unspecified vectors. |
| CVE-2013-4017 | SQL injection vulnerability in IBM Maximo Asset Management 7.1 before 7.1.1.12 allows remote attackers to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2013-4016 | SQL injection vulnerability in IBM Maximo Asset Management 7.x before 7.1.1.7 LAFIX.20140319-0837, 7.1.1.11 before IFIX.20140323-0749, 7.1.1.12 before IFIX.20140321-1336, 7.5.x before 7.5.0.3 IFIX027, 7.5.0.4 before IFIX011, and 7.5.0.5 before IFIX006; SmartCloud Control Desk 7.x before 7.5.0.3 and 7.5.1.x before 7.5.1.2; and Tivoli IT Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB) 7.x before 7.1.1.7 LAFIX.20140319-0837, 7.1.1.11 before IFIX.20140207-1801, and 7.1.1.12 before IFIX.20140218-1510 allows remote authenticated users to execute arbitrary SQL commands via a Birt report with a WHERE clause in plain text. |
| CVE-2013-4014 | Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management 6.2 through 6.2.8, 7.1 before 7.1.1.12, and 7.5 before 7.5.0.5 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2013-4013 | IBM Maximo Asset Management 6.2 through 6.2.8, 7.1 through 7.1.1.12, and 7.5 before 7.5.0.2 allows remote attackers to obtain sensitive information via unspecified vectors. |
| CVE-2013-3973 | SQL injection vulnerability in IBM Maximo Asset Management 7.1 before 7.1.1.12 and 7.5 before 7.5.0.5 allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2013-3972 | IBM Maximo Asset Management 7.1 before 7.1.1.12 and 7.5 before 7.5.0.5 allows remote authenticated users to obtain sensitive information via unspecified vectors. |
| CVE-2013-3971 | IBM Maximo Asset Management 7.1 through 7.1.1.12 and 7.5 before 7.5.0.5 allows remote authenticated users to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2013-3049. |
| CVE-2013-3406 | The "Files Available for Download" implementation in the Cisco Intelligent Automation for Cloud component in Cisco Services Portal 9.4(1) allows remote authenticated users to read arbitrary files via a crafted request, aka Bug ID CSCug65687. |
| CVE-2013-3049 | IBM Maximo Asset Management 7.1 through 7.1.1.12 and 7.5 before 7.5.0.5 allows remote authenticated users to bypass intended access restrictions via unspecified vectors, a different vulnerability than CVE-2013-3971. |
| CVE-2013-3048 | Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management 6.2 through 6.2.8, 7.1 through 7.1.1.12, and 7.5 before 7.5.0.3 allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2013-3047 | IBM Maximo Asset Management 7.1 before 7.1.1.12 and 7.5 before 7.5.0.5 allows remote authenticated users to gain privileges via unspecified vectors. |
| CVE-2013-2998 | frontcontroller.jsp in IBM Maximo Asset Management 7.x before 7.5.0.6 and SmartCloud Control Desk 7.x before 7.5.0.3 and 7.5.1.x before 7.5.1.2 allows remote authenticated users to obtain sensitive information via an invalid action_code. |
| CVE-2013-2940 | Unspecified vulnerability in Citrix CloudPortal Services Manager (aka Cortex) 10.0 before Cumulative Update 3 has unknown impact and attack vectors, a different vulnerability than other CVEs listed in CTX137162. |
| CVE-2013-2939 | Unspecified vulnerability in Citrix CloudPortal Services Manager (aka Cortex) 10.0 before Cumulative Update 3 has unknown impact and attack vectors, a different vulnerability than other CVEs listed in CTX137162. |
| CVE-2013-2938 | Unspecified vulnerability in Citrix CloudPortal Services Manager (aka Cortex) 10.0 before Cumulative Update 3 has unknown impact and attack vectors, a different vulnerability than other CVEs listed in CTX137162. |
| CVE-2013-2937 | Unspecified vulnerability in Citrix CloudPortal Services Manager (aka Cortex) 10.0 before Cumulative Update 3 has unknown impact and attack vectors, related to debugging messages, a different vulnerability than other CVEs listed in CTX137162. |
| CVE-2013-2936 | Unspecified vulnerability in Citrix CloudPortal Services Manager (aka Cortex) 10.0 before Cumulative Update 3 has unknown impact and attack vectors, a different vulnerability than other CVEs listed in CTX137162. |
| CVE-2013-2935 | Unspecified vulnerability in Citrix CloudPortal Services Manager (aka Cortex) 10.0 before Cumulative Update 3 has unknown impact and attack vectors, a different vulnerability than other CVEs listed in CTX137162. |
| CVE-2013-2934 | Citrix CloudPortal Services Manager (aka Cortex) 10.0 before Cumulative Update 3 does not properly restrict access to web services, which has unspecified impact and attack vectors, a different vulnerability than other CVEs listed in CTX137162. |
| CVE-2013-2933 | Unspecified vulnerability in Citrix CloudPortal Services Manager (aka Cortex) 10.0 before Cumulative Update 3 has unknown impact and attack vectors, a different vulnerability than other CVEs listed in CTX137162. |
| CVE-2013-2758 | Apache CloudStack 4.0.0 before 4.0.2 and Citrix CloudPlatform (formerly Citrix CloudStack) 3.0.x before 3.0.6 Patch C uses a hash of a predictable sequence, which makes it easier for remote attackers to guess the console access URL via a brute force attack. |
| CVE-2013-2757 | Citrix CloudPlatform (formerly Citrix CloudStack) 3.0.x before 3.0.6 Patch C does not properly restrict access to VNC ports on the management network, which allows remote attackers to have unspecified impact via unknown vectors. |
| CVE-2013-2756 | Apache CloudStack 4.0.0 before 4.0.2 and Citrix CloudPlatform (formerly Citrix CloudStack) 3.0.x before 3.0.6 Patch C allows remote attackers to bypass the console proxy authentication by leveraging knowledge of the source code. |
| CVE-2013-2639 | Cross-site scripting (XSS) vulnerability in CTERA Cloud Storage OS before 3.2.29.0, 3.2.42.0, and earlier allows remote attackers to inject arbitrary web script or HTML via the description in a project folder. |
| CVE-2013-2373 | The Engine in TIBCO Spotfire Web Player 3.3.x before 3.3.3, 4.0.x before 4.0.3, 4.5.x before 4.5.1, and 5.0.x before 5.0.1 does not properly implement access control, which allows remote attackers to obtain sensitive information or modify data via unspecified vectors. |
| CVE-2013-2372 | Cross-site scripting (XSS) vulnerability in the Engine in TIBCO Spotfire Web Player 3.3.x before 3.3.3, 4.0.x before 4.0.3, 4.5.x before 4.5.1, and 5.0.x before 5.0.1 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2013-2136 | Multiple cross-site scripting (XSS) vulnerabilities in Apache CloudStack before 4.1.1 allow remote attackers to inject arbitrary web script or HTML via the (1) Physical network name to the Zone wizard; (2) New network name, (3) instance name, or (4) group to the Instance wizard; (5) unspecified "multi-edit fields;" and (6) unspecified "list view" edit fields related to global settings. |
| CVE-2013-2089 | Incomplete blacklist vulnerability in ownCloud before 5.0.6 allows remote authenticated users to execute arbitrary PHP code by uploading a crafted file, then accessing it via a direct request to the file in /data. |
| CVE-2013-2086 | The configuration loader in ownCloud 5.0.x before 5.0.6 allows remote attackers to obtain CSRF tokens and other sensitive information by reading an unspecified JavaScript file. |
| CVE-2013-2050 | SQL injection vulnerability in the miq_policy controller in Red Hat CloudForms 2.0 Management Engine (CFME) 5.1 and ManageIQ Enterprise Virtualization Manager 5.0 and earlier allows remote authenticated users to execute arbitrary SQL commands via the profile[] parameter in an explorer action. |
| CVE-2013-2046 | SQL injection vulnerability in lib/bookmarks.php in ownCloud Server 4.5.x before 4.5.11 and 5.x before 5.0.6 allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2013-2045 | SQL injection vulnerability in lib/db.php in ownCloud Server 5.0.x before 5.0.6 allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2013-2034 | Multiple cross-site request forgery (CSRF) vulnerabilities in Jenkins before 1.514, LTS before 1.509.1, and Enterprise 1.466.x before 1.466.14.1 and 1.480.x before 1.480.4.1 allow remote attackers to hijack the authentication of administrators for requests that (1) execute arbitrary code or (2) initiate deployment of binaries to a Maven repository via unspecified vectors. |
| CVE-2013-2033 | Cross-site scripting (XSS) vulnerability in Jenkins before 1.514, LTS before 1.509.1, and Enterprise 1.466.x before 1.466.14.1 and 1.480.x before 1.480.4.1 allows remote authenticated users with write permission to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2013-1967 | Cross-site scripting (XSS) vulnerability in flashmediaelement.swf in MediaElement.js before 2.11.2, as used in ownCloud Server 5.0.x before 5.0.5 and 4.5.x before 4.5.10, allows remote attackers to inject arbitrary web script or HTML via the file parameter. |
| CVE-2013-1963 | The contacts application in ownCloud before 4.5.10 and 5.x before 5.0.5 does not properly check the ownership of contacts, which allows remote authenticated users to download arbitrary contacts via unspecified vectors. |
| CVE-2013-1939 | The HTML\Browser plugin in SabreDAV before 1.6.9, 1.7.x before 1.7.7, and 1.8.x before 1.8.5, as used in ownCloud, when running on Windows, does not properly check path separators in the base path, which allows remote attackers to read arbitrary files via a \ (backslash) character. |
| CVE-2013-1893 | SQL injection vulnerability in addressbookprovider.php in ownCloud Server before 5.0.1 allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors, related to the contacts application. |
| CVE-2013-1890 | Multiple cross-site scripting (XSS) vulnerabilities in ownCloud Server before 5.0.1 allow remote attackers to inject arbitrary web script or HTML via the (1) new_name parameter to apps/bookmarks/ajax/renameTag.php or (2) multiple unspecified parameters to unknown files in apps/contacts/ajax/. |
| CVE-2013-1851 | Incomplete blacklist vulnerability in lib/migrate.php in ownCloud before 4.0.13 and 4.5.x before 4.5.8, when the user_migrate application is enabled, allows remote authenticated users to import arbitrary files to the user's account via unspecified vectors. |
| CVE-2013-1850 | Multiple incomplete blacklist vulnerabilities in (1) import.php and (2) ajax/uploadimport.php in apps/contacts/ in ownCloud before 4.0.13 and 4.5.x before 4.5.8 allow remote authenticated users to execute arbitrary PHP code by uploading a .htaccess file. |
| CVE-2013-1822 | Multiple cross-site scripting (XSS) vulnerabilities in ownCloud 4.5.x before 4.5.8 allow remote authenticated users with administrator privileges to inject arbitrary web script or HTML via the (1) quota parameter to /core/settings/ajax/setquota.php, or remote authenticated users with group admin privileges to inject arbitrary web script or HTML via the (2) group field to settings.php or (3) "share with" field. |
| CVE-2013-1813 | util-linux/mdev.c in BusyBox before 1.21.0 uses 0777 permissions for parent directories when creating nested directories under /dev/, which allows local users to have unknown impact and attack vectors. |
| CVE-2013-1152 | Cisco Adaptive Security Appliances (ASA) devices with software 9.0 before 9.0(1.2) allow remote attackers to cause a denial of service (device reload) via a crafted field in a DNS message, aka Bug ID CSCuc80080. |
| CVE-2013-1151 | Cisco Adaptive Security Appliances (ASA) devices with software 7.x before 7.2(5.10), 8.0 before 8.0(5.31), 8.1 and 8.2 before 8.2(5.38), 8.3 before 8.3(2.37), 8.4 before 8.4(5), 8.5 before 8.5(1.17), 8.6 before 8.6(1.10), and 8.7 before 8.7(1.3) allow remote attackers to cause a denial of service (device reload) via a crafted certificate, aka Bug ID CSCuc72408. |
| CVE-2013-1150 | The authentication-proxy implementation on Cisco Adaptive Security Appliances (ASA) devices with software 7.x before 7.2(5.10), 8.0 before 8.0(5.31), 8.1 and 8.2 before 8.2(5.38), 8.3 before 8.3(2.37), 8.4 before 8.4(5.3), 8.5 and 8.6 before 8.6(1.10), 8.7 before 8.7(1.4), 9.0 before 9.0(1.1), and 9.1 before 9.1(1.2) allows remote attackers to cause a denial of service (device reload) via a crafted URL, aka Bug ID CSCud16590. |
| CVE-2013-1149 | Cisco Adaptive Security Appliances (ASA) devices with software 7.x before 7.2(5.10), 8.0 before 8.0(5.28), 8.1 and 8.2 before 8.2(5.35), 8.3 before 8.3(2.34), 8.4 before 8.4(4.11), 8.6 before 8.6(1.10), and 8.7 before 8.7(1.3), and Cisco Firewall Services Module (FWSM) software 3.1 and 3.2 before 3.2(24.1) and 4.0 and 4.1 before 4.1(11.1), allow remote attackers to cause a denial of service (device reload) via a crafted IKEv1 message, aka Bug IDs CSCub85692 and CSCud20267. |
| CVE-2013-1139 | The nsAPI interface in Cisco Cloud Portal 9.1 SP1 and SP2, and 9.3 through 9.3.2, does not properly check privileges, which allows remote authenticated users to obtain sensitive information via a crafted URL, aka Bug ID CSCud81134. |
| CVE-2013-0465 | Unspecified vulnerability in the IBM WebSphere Cast Iron physical and virtual appliance 6.0 and 6.1 before 6.1.0.15 and 6.3 before 6.3.0.1, when LDAP authentication is enabled, allows remote attackers to obtain sensitive information, modify data, or cause a denial of service via unknown vectors. |
| CVE-2013-0457 | Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management 7.5, Maximo Asset Management Essentials 7.5, and SmartCloud Control Desk 7.5 allows remote authenticated users to inject arbitrary web script or HTML via vectors related to a uisessionid. |
| CVE-2013-0451 | SQL injection vulnerability in IBM Maximo Asset Management 6.2 through 6.2.8 and 7.1 through 7.1.1.12 allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2013-0331 | Jenkins before 1.502 and LTS before 1.480.3 allows remote authenticated users with write access to cause a denial of service via a crafted payload. |
| CVE-2013-0330 | Unspecified vulnerability in Jenkins before 1.502 and LTS before 1.480.3 allows remote authenticated users with write access to build arbitrary jobs via unknown attack vectors. |
| CVE-2013-0329 | Unspecified vulnerability in Jenkins before 1.502 and LTS before 1.480.3 allows remote attackers to bypass the CSRF protection mechanism via unknown attack vectors. |
| CVE-2013-0328 | Cross-site scripting (XSS) vulnerability in Jenkins before 1.502 and LTS before 1.480.3 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2013-0327 | Cross-site request forgery (CSRF) vulnerability in Jenkins master in Jenkins before 1.502 and LTS before 1.480.3 allows remote attackers to hijack the authentication of users via unknown vectors. |
| CVE-2013-0307 | Cross-site scripting (XSS) vulnerability in settings.php in ownCloud before 4.0.12 and 4.5.x before 4.5.7 allows remote administrators to inject arbitrary web script or HTML via the group input field parameter. |
| CVE-2013-0303 | Unspecified vulnerability in core/ajax/translations.php in ownCloud before 4.0.12 and 4.5.x before 4.5.6 allows remote authenticated users to execute arbitrary PHP code via unknown vectors. NOTE: this entry has been SPLIT due to different affected versions. The core/settings.php issue is covered by CVE-2013-7344. |
| CVE-2013-0301 | Cross-site request forgery (CSRF) vulnerability in apps/calendar/ajax/settings/settimezone in ownCloud before 4.0.12 allows remote attackers to hijack the authentication of users for requests that change the timezone via the timezone parameter. |
| CVE-2013-0300 | Multiple cross-site request forgery (CSRF) vulnerabilities in ownCloud 4.5.x before 4.5.7 allow remote attackers to hijack the authentication of users for requests that (1) change the default view via the v parameter to apps/calendar/ajax/changeview.php, mount arbitrary (2) Google Drive or (3) Dropbox folders via vectors related to addRootCertificate.php, dropbox.php and google.php in apps/files_external/ajax/, or (4) change the authentication server URL via unspecified vectors to apps/user_webdavauth/settings.php. |
| CVE-2013-0299 | Multiple cross-site request forgery (CSRF) vulnerabilities in ownCloud before 4.0.12 and 4.5.x before 4.5.7 allow remote attackers to hijack the authentication of users for requests that (1) change the timezone for the user via the lat and lng parameters to apps/calendar/ajax/settings/guesstimezone.php, (2) disable or enable the automatic timezone detection via the timezonedetection parameter to apps/calendar/ajax/settings/timezonedetection.php, (3) import user accounts via the admin_export parameter to apps/admin_migrate/settings.php, (4) overwrite user files via the operation parameter to apps/user_migrate/ajax/export.php, or (5) change the authentication server URL via unspecified vectors to apps/user_ldap/settings.php. |
| CVE-2013-0298 | Multiple cross-site scripting (XSS) vulnerabilities in ownCloud 4.5.x before 4.5.7 allow remote attackers to inject arbitrary web script or HTML via (1) a crafted iCalendar file to the calendar application, the (2) dir or (3) file parameter to apps/files_pdfviewer/viewer.php, or the (4) mountpoint parameter to /apps/files_external/addMountPoint.php. |
| CVE-2013-0297 | Multiple cross-site scripting (XSS) vulnerabilities in ownCloud before 4.0.12 and 4.5.x before 4.5.7 allow remote authenticated administrators to inject arbitrary web script or HTML via the (1) site_name or (2) site_url parameter to apps/external/ajax/setsites.php. |
| CVE-2013-0203 | Multiple cross-site scripting (XSS) vulnerabilities in ownCloud 4.5.5, 4.0.10, and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) unspecified parameters to apps/calendar/ajax/event/new.php or (2) url parameter to apps/bookmarks/ajax/addBookmark.php. |
| CVE-2013-0202 | Cross-site scripting (XSS) vulnerability in ownCloud 4.5.5, 4.0.10, and earlier allows remote attackers to inject arbitrary web script or HTML via the action parameter to core/ajax/sharing.php. |
| CVE-2013-0201 | Multiple cross-site scripting (XSS) vulnerabilities in ownCloud 4.5.5, 4.0.10, and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) QUERY_STRING to core/lostpassword/templates/resetpassword.php, (2) mime parameter to apps/files/ajax/mimeicon.php, or (3) token parameter to apps/gallery/sharing.php. |
| CVE-2013-0158 | Unspecified vulnerability in Jenkins before 1.498, Jenkins LTS before 1.480.2, and Jenkins Enterprise 1.447.x before 1.447.6.1 and 1.466.x before 1.466.12.1, when a slave is attached and anonymous read access is enabled, allows remote attackers to obtain the master cryptographic key via unknown vectors. |
| CVE-2012-6639 | An privilege elevation vulnerability exists in Cloud-init before 0.7.0 when requests to an untrusted system are submitted for EC2 instance data. |
| CVE-2012-6624 | Cross-site scripting (XSS) vulnerability in the SoundCloud Is Gold plugin 2.1 for WordPress allows remote attackers to inject arbitrary web script or HTML via the width parameter in a soundcloud_is_gold_player_preview action to wp-admin/admin-ajax.php. |
| CVE-2012-6357 | IBM Maximo Asset Management 7.5, Maximo Asset Management Essentials 7.5, and SmartCloud Control Desk 7.5 allow remote authenticated users to gain privileges and bypass intended restrictions on asset-lookup operations via unspecified vectors. |
| CVE-2012-6356 | IBM Maximo Asset Management 7.5, Maximo Asset Management Essentials 7.5, and SmartCloud Control Desk 7.5 allow remote authenticated users to gain privileges via vectors related to an import operation. |
| CVE-2012-6355 | IBM Maximo Asset Management 6.2 through 7.5, Maximo Asset Management Essentials 6.2 through 7.5, Tivoli Asset Management for IT 6.2 through 7.2, Tivoli Service Request Manager 7.1 and 7.2, Maximo Service Desk 6.2, Change and Configuration Management Database (CCMDB) 7.1 and 7.2, and SmartCloud Control Desk 7.5 allow remote authenticated users to gain privileges via vectors related to a work order. |
| CVE-2012-6117 | Aeolus Configuration Server, as used in Red Hat CloudForms Cloud Engine before 1.1.2, uses world-readable permissions for /var/log/aeolus-configserver/configserver.log, which allows local users to read plaintext passwords by reading the log file. |
| CVE-2012-6074 | Cross-site scripting (XSS) vulnerability in Jenkins before 1.491, Jenkins LTS before 1.480.1, and Jenkins Enterprise 1.424.x before 1.424.6.13, 1.447.x before 1.447.4.1, and 1.466.x before 1.466.10.1 allows remote authenticated users with write access to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2012-6073 | Open redirect vulnerability in Jenkins before 1.491, Jenkins LTS before 1.480.1, and Jenkins Enterprise 1.424.x before 1.424.6.13, 1.447.x before 1.447.4.1, and 1.466.x before 1.466.10.1 allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via unspecified vectors. |
| CVE-2012-6072 | CRLF injection vulnerability in Jenkins before 1.491, Jenkins LTS before 1.480.1, and Jenkins Enterprise 1.424.x before 1.424.6.13, 1.447.x before 1.447.4.1, and 1.466.x before 1.466.10.1 allows remote attackers to inject arbitrary HTTP headers and conduct HTTP response splitting attacks via unspecified vectors. |
| CVE-2012-5666 | Cross-site scripting (XSS) vulnerability in bookmarks/js/bookmarks.js in ownCloud 4.0.x before 4.0.10 and 4.5.x before 4.5.5 allows remote attackers to inject arbitrary web script or HTML via the PATH_INFO to apps/bookmark/index.php. |
| CVE-2012-5665 | ownCloud 4.0.x before 4.0.10 and 4.5.x before 4.5.5 does not properly restrict access to settings.php, which allows remote attackers to edit app configurations of user_webdavauth and user_ldap by editing this file. |
| CVE-2012-5610 | Incomplete blacklist vulnerability in lib/filesystem.php in ownCloud before 4.0.9 and 4.5.x before 4.5.2 allows remote authenticated users to execute arbitrary PHP code by uploading a file with a special crafted name. |
| CVE-2012-5609 | Incomplete blacklist vulnerability in lib/migrate.php in ownCloud before 4.5.2 allows remote authenticated users to execute arbitrary PHP code by uploading a crafted mount.php file in a ZIP file. |
| CVE-2012-5608 | Cross-site scripting (XSS) vulnerability in apps/user_webdavauth/settings.php in ownCloud 4.5.x before 4.5.2 allows remote attackers to inject arbitrary web script or HTML via arbitrary POST parameters. |
| CVE-2012-5607 | The "Lost Password" reset functionality in ownCloud before 4.0.9 and 4.5.0 does not properly check the security token, which allows remote attackers to change an accounts password via unspecified vectors related to a "Remote Timing Attack." |
| CVE-2012-5606 | Multiple cross-site scripting (XSS) vulnerabilities in ownCloud before 4.0.9 and 4.5.0 allow remote attackers to inject arbitrary web script or HTML via the (1) file name to apps/files_versions/js/versions.js or (2) apps/files/js/filelist.js; or (3) event title to 3rdparty/fullcalendar/js/fullcalendar.js. |
| CVE-2012-5605 | Grinder in Red Hat CloudForms before 1.1 uses world-writable permissions for /var/lib/pulp/cache/grinder/, which allows local users to modify grinder cache files. |
| CVE-2012-5604 | The ldap_fluff gem for Ruby, as used in Red Hat CloudForms 1.1, when using Active Directory for authentication, allows remote attackers to bypass authentication via unspecified vectors. |
| CVE-2012-5603 | proxies_controller.rb in Katello in Red Hat CloudForms before 1.1 does not properly check permissions, which allows remote authenticated users to read consumer certificates or change arbitrary users' settings via unspecified vectors related to the "consumer UUID" of a system. |
| CVE-2012-5571 | OpenStack Keystone Essex (2012.1) and Folsom (2012.2) does not properly handle EC2 tokens when the user role has been removed from a tenant, which allows remote authenticated users to bypass intended authorization restrictions by leveraging a token for the removed user role. |
| CVE-2012-5509 | aeolus-configserver-setup in the Aeolas Configuration Server, as used in Red Hat CloudForms Cloud Engine before 1.1.2, uses world-readable permissions for a temporary file in /tmp, which allows local users to read credentials by reading this file. |
| CVE-2012-5483 | tools/sample_data.sh in OpenStack Keystone 2012.1.3, when access to Amazon Elastic Compute Cloud (Amazon EC2) is configured, uses world-readable permissions for /etc/keystone/ec2rc, which allows local users to obtain access to EC2 services by reading administrative access and secret values from this file. |
| CVE-2012-5419 | Cisco Adaptive Security Appliance (ASA) software 8.7.1 and 8.7.1.1 for the Cisco ASA 1000V Cloud Firewall allows remote attackers to cause a denial of service (device reload) via a malformed H.225 H.323 IPv4 packet, aka Bug IDs CSCuc42812 and CSCuc88741. |
| CVE-2012-5236 | ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none. |
| CVE-2012-4753 | Multiple cross-site request forgery (CSRF) vulnerabilities in ownCloud before 4.0.5 allow remote attackers to hijack the authentication of unspecified victims via unknown vectors. |
| CVE-2012-4752 | appconfig.php in ownCloud before 4.0.6 does not properly restrict access, which allows remote authenticated users to edit app configurations via unspecified vectors. NOTE: this can be leveraged by unauthenticated remote attackers using CVE-2012-4393. |
| CVE-2012-4574 | Pulp in Red Hat CloudForms before 1.1 uses world-readable permissions for pulp.conf, which allows local users to read the administrative password by reading this file. |
| CVE-2012-4501 | Citrix Cloud.com CloudStack, and Apache CloudStack pre-release, allows remote attackers to make arbitrary API calls by leveraging the system user account, as demonstrated by API calls to delete VMs. |
| CVE-2012-4451 | Multiple cross-site scripting (XSS) vulnerabilities in Zend Framework 2.0.x before 2.0.1 allow remote attackers to inject arbitrary web script or HTML via unspecified input to (1) Debug, (2) Feed\PubSubHubbub, (3) Log\Formatter\Xml, (4) Tag\Cloud\Decorator, (5) Uri, (6) View\Helper\HeadStyle, (7) View\Helper\Navigation\Sitemap, or (8) View\Helper\Placeholder\Container\AbstractStandalone, related to Escaper. |
| CVE-2012-4397 | Multiple cross-site scripting (XSS) vulnerabilities in ownCloud before 4.0.1 allow remote attackers to inject arbitrary web script or HTML via the (1) calendar displayname to part.choosecalendar.rowfields.php or (2) part.choosecalendar.rowfields.shared.php in apps/calendar/templates/; or (3) unspecified vectors to apps/contacts/lib/vcard.php. |
| CVE-2012-4396 | Multiple cross-site scripting (XSS) vulnerabilities in ownCloud before 4.0.2 allow remote attackers to inject arbitrary web script or HTML via the (1) file names to apps/user_ldap/settings.php; (2) url or (3) title parameter to apps/bookmarks/ajax/editBookmark.php; (4) tag or (5) page parameter to apps/bookmarks/ajax/updateList.php; (6) identity to apps/user_openid/settings.php; (7) stack name in apps/gallery/lib/tiles.php; (8) root parameter to apps/gallery/templates/index.php; (9) calendar displayname in apps/calendar/templates/part.import.php; (10) calendar uri in apps/calendar/templates/part.choosecalendar.rowfields.php; (11) title, (12) location, or (13) description parameter in apps/calendar/lib/object.php; (14) certain vectors in core/js/multiselect.js; or (15) artist, (16) album, or (17) title comments parameter in apps/media/lib_scanner.php. |
| CVE-2012-4395 | Cross-site scripting (XSS) vulnerability in index.php in ownCloud before 4.0.3 allows remote attackers to inject arbitrary web script or HTML via the redirect_url parameter. |
| CVE-2012-4394 | Cross-site scripting (XSS) vulnerability in apps/files/js/filelist.js in ownCloud before 4.0.5 allows remote attackers to inject arbitrary web script or HTML via the file parameter. |
| CVE-2012-4393 | Multiple cross-site request forgery (CSRF) vulnerabilities in ownCloud before 4.0.6 allow remote attackers to hijack the authentication of arbitrary users for requests that use (1) addBookmark.php, (2) delBookmark.php, or (3) editBookmark.php in bookmarks/ajax/; (4) calendar/delete.php, (5) calendar/edit.php, (6) calendar/new.php, (7) calendar/update.php, (8) event/delete.php, (9) event/edit.php, (10) event/move.php, (11) event/new.php, (12) import/import.php, (13) settings/setfirstday.php, (14) settings/settimeformat.php, (15) share/changepermission.php, (16) share/share.php, (17) or share/unshare.php in calendar/ajax/; (18) external/ajax/setsites.php, (19) files/ajax/delete.php, (20) files/ajax/move.php, (21) files/ajax/newfile.php, (22) files/ajax/newfolder.php, (23) files/ajax/rename.php, (24) files_sharing/ajax/email.php, (25) files_sharing/ajax/setpermissions.php, (26) files_sharing/ajax/share.php, (27) files_sharing/ajax/toggleresharing.php, (28) files_sharing/ajax/togglesharewitheveryone.php, (29) files_sharing/ajax/unshare.php, (30) files_texteditor/ajax/savefile.php, (31) files_versions/ajax/rollbackVersion.php, (32) gallery/ajax/createAlbum.php, (33) gallery/ajax/sharing.php, (34) tasks/ajax/addtask.php, (35) tasks/ajax/addtaskform.php, (36) tasks/ajax/delete.php, or (37) tasks/ajax/edittask.php in apps/; or administrators for requests that use (38) changepassword.php, (39) creategroup.php, (40) createuser.php, (41) disableapp.php, (42) enableapp.php, (43) lostpassword.php, (44) removegroup.php, (45) removeuser.php, (46) setlanguage.php, (47) setloglevel.php, (48) setquota.php, or (49) togglegroups.php in settings/ajax/. |
| CVE-2012-4392 | index.php in ownCloud 4.0.7 does not properly validate the oc_token cookie, which allows remote attackers to bypass authentication via a crafted oc_token cookie value. |
| CVE-2012-4391 | Cross-site request forgery (CSRF) vulnerability in core/ajax/appconfig.php in ownCloud before 4.0.7 allows remote attackers to hijack the authentication of administrators for requests that edit the app configurations. |
| CVE-2012-4390 | (1) apps/calendar/appinfo/remote.php and (2) apps/contacts/appinfo/remote.php in ownCloud before 4.0.7 allows remote authenticated users to enumerate the registered users via unspecified vectors. |
| CVE-2012-4389 | Incomplete blacklist vulnerability in lib/migrate.php in ownCloud before 4.0.7 allows remote attackers to execute arbitrary code by uploading a crafted .htaccess file in an import.zip file and accessing an uploaded PHP file. |
| CVE-2012-4065 | Eucalyptus before 3.1.1 does not properly restrict the binding of external SOAP web-services messages, which allows remote authenticated users to bypass unspecified authorization checks and obtain direct access to a (1) Cloud Controller or (2) Walrus service via a crafted message, as demonstrated by changes to a volume, snapshot, or cloud configuration setting. |
| CVE-2012-4064 | Eucalyptus before 3.1.1 does not properly restrict the binding of external SOAP web-services messages, which allows remote authenticated users to gain privileges by sending a message to (1) Cloud Controller or (2) Walrus with the internal message format and a modified user id. |
| CVE-2012-3538 | Pulp in Red Hat CloudForms before 1.1 logs administrative passwords in a world-readable file, which allows local users to read pulp administrative passwords by reading production.log. |
| CVE-2012-3537 | The Crowbar Ohai plugin (chef/cookbooks/ohai/files/default/plugins/crowbar.rb) in the Deployer Barclamp in Crowbar, possibly 1.4 and earlier, allows local users to execute arbitrary shell commands via vectors related to "insecure handling of tmp files" and predictable file names. |
| CVE-2012-3333 | CRLF injection vulnerability in IBM Maximo Asset Management 7.x before 7.5.0.6 and SmartCloud Control Desk 7.x before 7.5.0.3 and 7.5.1.x before 7.5.1.2 allows remote attackers to inject arbitrary HTTP headers and conduct HTTP response splitting attacks via a crafted parameter in a URL. |
| CVE-2012-3327 | Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management 6.2 through 7.5, Maximo Asset Management Essentials 6.2 through 7.5, Tivoli Asset Management for IT 6.2 through 7.2, Tivoli Service Request Manager 7.1 and 7.2, Maximo Service Desk 6.2, Change and Configuration Management Database (CCMDB) 7.1 and 7.2, and SmartCloud Control Desk 7.5 allows remote attackers to inject arbitrary web script or HTML via vectors related to a login action. |
| CVE-2012-3326 | Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management 7.5, as used in SmartCloud Control Desk, Tivoli Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB), allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2012-3323 | IBM Maximo Asset Management 6.2 before 6.2.8, 7.1 before 7.1.1.12, and 7.5 before 7.5.0.3 allows remote attackers to gain privileges via unspecified vectors. |
| CVE-2012-3322 | Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management 6.2 through 7.5, Maximo Asset Management Essentials 6.2 through 7.5, Tivoli Asset Management for IT 6.2 through 7.2, Tivoli Service Request Manager 7.1 and 7.2, Maximo Service Desk 6.2, Change and Configuration Management Database (CCMDB) 7.1 and 7.2, and SmartCloud Control Desk 7.5 allows remote authenticated users to inject arbitrary web script or HTML via vectors related to a display name. |
| CVE-2012-3321 | IBM SmartCloud Control Desk 7.5 allows remote authenticated users to bypass intended access restrictions via vectors involving an expired password. |
| CVE-2012-3316 | Cross-site scripting (XSS) vulnerability in the Tivoli Process Automation Engine (TPAE) in IBM Maximo Asset Management 6.2 through 7.5, Maximo Asset Management Essentials 6.2 through 7.5, Tivoli Asset Management for IT 6.2 through 7.2, Tivoli Service Request Manager 7.1 and 7.2, Maximo Service Desk 6.2, Change and Configuration Management Database (CCMDB) 7.1 and 7.2, and SmartCloud Control Desk 7.5 allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2012-3313 | Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management 6.2 through 7.5, as used in SmartCloud Control Desk, Tivoli Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB), allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2012-2398 | Cross-site scripting (XSS) vulnerability in files/ajax/download.php in ownCloud before 3.0.3 allows remote attackers to inject arbitrary web script or HTML via the files parameter, a different vulnerability than CVE-2012-2269.4. |
| CVE-2012-2397 | Cross-site request forgery (CSRF) vulnerability in ownCloud before 3.0.3 allows remote attackers to hijack the authentication of arbitrary users for requests that insert cross-site scripting (XSS) sequences via vectors involving contacts. |
| CVE-2012-2285 | EMC Cloud Tiering Appliance (aka CTA, formerly FMA) 9.0 and earlier, and Cloud Tiering Appliance Virtual Edition (CTA/VE) 9.0 and earlier, allows remote attackers to obtain GUI administrative access by sending a crafted file during the authentication phase. |
| CVE-2012-2283 | The Iomega Home Media Network Hard Drive with EMC Lifeline firmware before 2.104, Home Media Network Hard Drive Cloud Edition with EMC Lifeline firmware before 3.2.3.15290, iConnect with EMC Lifeline firmware before 2.5.26.18966, and StorCenter with EMC Lifeline firmware before 2.0.18.23122, 2.1.x before 2.1.42.18967, and 3.x before 3.2.3.15290 allow remote authenticated users to read or modify data on arbitrary remote shares via unspecified vectors. |
| CVE-2012-2270 | Open redirect vulnerability in index.php (aka the Login Page) in ownCloud before 3.0.3 allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via a URL in the redirect_url parameter. |
| CVE-2012-2269 | Multiple cross-site scripting (XSS) vulnerabilities in ownCloud before 3.0.3 allow remote attackers to inject arbitrary web script or HTML via (1) an arbitrary field to apps/contacts/ajax/addcard.php, (2) the parameter parameter to apps/contacts/ajax/addproperty.php, (3) the name parameter to apps/contacts/ajax/createaddressbook, (4) the file parameter to files/download.php, or the (5) name, (6) user, or (7) redirect_url parameter to files/index.php. |
| CVE-2012-2185 | IBM Maximo Asset Management 6.2 through 7.5, as used in SmartCloud Control Desk, Tivoli Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB), allows remote authenticated users to obtain sensitive information via unspecified vectors. |
| CVE-2012-2184 | Session fixation vulnerability in IBM Maximo Asset Management 7.1 through 7.5, as used in SmartCloud Control Desk, Tivoli Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB), allows remote attackers to hijack web sessions via unspecified vectors. |
| CVE-2012-2183 | Session fixation vulnerability in IBM Maximo Asset Management 6.2 through 7.5, as used in SmartCloud Control Desk, Tivoli Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB), allows remote attackers to hijack web sessions via unspecified vectors. |
| CVE-2012-1381 | Unspecified vulnerability in the NetEase CloudAlbum (com.netease.cloudalbum) application 2.0.0 and 2.2.0 for Android has unknown impact and attack vectors. |
| CVE-2012-0913 | SQL injection vulnerability in checklogin.aspx in ICloudCenter ICTimeAttendance 1.0 allows remote attackers to execute arbitrary SQL commands via the passw parameter. NOTE: Some of these details are obtained from third party information. |
| CVE-2012-0747 | SQL injection vulnerability in IBM Maximo Asset Management 6.2 through 7.5, as used in SmartCloud Control Desk, Tivoli Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB), allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2012-0746 | Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management 7.5, as used in SmartCloud Control Desk, Tivoli Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB), allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2012-0728 | SQL injection vulnerability in IBM Maximo Asset Management 7.1 through 7.5, as used in SmartCloud Control Desk, Tivoli Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB), allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2012-0727 | SQL injection vulnerability in IBM Maximo Asset Management 7.5, as used in SmartCloud Control Desk, Tivoli Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB), allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2012-0714 | Cross-site request forgery (CSRF) vulnerability in IBM Maximo Asset Management 6.2 through 7.5, as used in SmartCloud Control Desk, Tivoli Asset Management for IT, Tivoli Service Request Manager, Maximo Service Desk, and Change and Configuration Management Database (CCMDB), allows remote attackers to hijack the authentication of unspecified victims via unknown vectors. |
| CVE-2012-0434 | The server in Crowbar, as used in SUSE Cloud 1.0, uses weak permissions for the production.log file, which has unspecified impact and attack vectors. |
| CVE-2012-0039 | ** DISPUTED ** GLib 2.31.8 and earlier, when the g_str_hash function is used, computes hash values without restricting the ability to trigger hash collisions predictably, which allows context-dependent attackers to cause a denial of service (CPU consumption) via crafted input to an application that maintains a hash table. NOTE: this issue may be disputed by the vendor; the existence of the g_str_hash function is not a vulnerability in the library, because callers of g_hash_table_new and g_hash_table_new_full can specify an arbitrary hash function that is appropriate for the application. |
| CVE-2011-5216 | SQL injection vulnerability in ajax.php in SCORM Cloud For WordPress plugin before 1.0.7 for WordPress allows remote attackers to execute arbitrary SQL commands via the active parameter. NOTE: some of these details are obtained from third party information. |
| CVE-2011-2654 | The RPC implementation in the server in Novell Cloud Manager 1.1.2 before Patch 3 does not properly initialize objects, which allows remote attackers to execute arbitrary code by making RPC calls that leverage incorrect privileges associated with a partially initialized session. |
| CVE-2011-0730 | Eucalyptus before 2.0.3 and Eucalyptus EE before 2.0.2, as used in Ubuntu Enterprise Cloud (UEC) and other products, do not properly interpret signed elements in SOAP requests, which allows man-in-the-middle attackers to execute arbitrary commands by modifying a request, related to an "XML Signature Element Wrapping" or a "SOAP signature replay" issue. |
| CVE-2010-2711 | Unspecified vulnerability in the HP MagCloud app before 1.0.5 for the iPad allows remote attackers to read and modify MagCloud application data via unknown vectors. |
| CVE-2009-0931 | Cross-site scripting (XSS) vulnerability in the tag cloud search script (horde/services/portal/cloud_search.php) in Horde before 3.2.4 and 3.3.3, and Horde Groupware before 1.1.5, allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2006-4328 | SQL injection vulnerability in admin.php in CloudNine Interactive Links Manager 2006-06-12, when magic_quotes_gpc is disabled, allows remote attackers to execute arbitrary SQL commands via the nick parameter. |
| CVE-2006-4327 | Multiple cross-site scripting (XSS) vulnerabilities in add_url.php in CloudNine Interactive Links Manager 2006-06-12 allow remote attackers to inject arbitrary web script or HTML via the (1) title, (2) description, or (3) keywords parameters. |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
