|
|
Search Results
There are 208 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2025-38314 | In the Linux kernel, the following vulnerability has been resolved: virtio-pci: Fix result size returned for the admin command completion The result size returned by virtio_pci_admin_dev_parts_get() is 8 bytes larger than the actual result data size. This occurs because the result_sg_size field of the command is filled with the result length from virtqueue_get_buf(), which includes both the data size and an additional 8 bytes of status. This oversized result size causes two issues: 1. The state transferred to the destination includes 8 bytes of extra data at the end. 2. The allocated buffer in the kernel may be smaller than the returned size, leading to failures when reading beyond the allocated size. The commit fixes this by subtracting the status size from the result of virtqueue_get_buf(). This fix has been tested through live migrations with virtio-net, virtio-net-transitional, and virtio-blk devices. |
| CVE-2025-38296 | In the Linux kernel, the following vulnerability has been resolved: ACPI: platform_profile: Avoid initializing on non-ACPI platforms The platform profile driver is loaded even on platforms that do not have ACPI enabled. The initialization of the sysfs entries was recently moved from platform_profile_register() to the module init call, and those entries need acpi_kobj to be initialized which is not the case when ACPI is disabled. This results in the following warning: WARNING: CPU: 5 PID: 1 at fs/sysfs/group.c:131 internal_create_group+0xa22/0xdd8 Modules linked in: CPU: 5 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.15.0-rc7-dirty #6 PREEMPT Tainted: [W]=WARN Hardware name: riscv-virtio,qemu (DT) epc : internal_create_group+0xa22/0xdd8 ra : internal_create_group+0xa22/0xdd8 Call Trace: internal_create_group+0xa22/0xdd8 sysfs_create_group+0x22/0x2e platform_profile_init+0x74/0xb2 do_one_initcall+0x198/0xa9e kernel_init_freeable+0x6d8/0x780 kernel_init+0x28/0x24c ret_from_fork+0xe/0x18 Fix this by checking if ACPI is enabled before trying to create sysfs entries. [ rjw: Subject and changelog edits ] |
| CVE-2025-38261 | In the Linux kernel, the following vulnerability has been resolved: riscv: save the SR_SUM status over switches When threads/tasks are switched we need to ensure the old execution's SR_SUM state is saved and the new thread has the old SR_SUM state restored. The issue was seen under heavy load especially with the syz-stress tool running, with crashes as follows in schedule_tail: Unable to handle kernel access to user memory without uaccess routines at virtual address 000000002749f0d0 Oops [#1] Modules linked in: CPU: 1 PID: 4875 Comm: syz-executor.0 Not tainted 5.12.0-rc2-syzkaller-00467-g0d7588ab9ef9 #0 Hardware name: riscv-virtio,qemu (DT) epc : schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 ra : task_pid_vnr include/linux/sched.h:1421 [inline] ra : schedule_tail+0x70/0xb2 kernel/sched/core.c:4264 epc : ffffffe00008c8b0 ra : ffffffe00008c8ae sp : ffffffe025d17ec0 gp : ffffffe005d25378 tp : ffffffe00f0d0000 t0 : 0000000000000000 t1 : 0000000000000001 t2 : 00000000000f4240 s0 : ffffffe025d17ee0 s1 : 000000002749f0d0 a0 : 000000000000002a a1 : 0000000000000003 a2 : 1ffffffc0cfac500 a3 : ffffffe0000c80cc a4 : 5ae9db91c19bbe00 a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffe000082eba s2 : 0000000000040000 s3 : ffffffe00eef96c0 s4 : ffffffe022c77fe0 s5 : 0000000000004000 s6 : ffffffe067d74e00 s7 : ffffffe067d74850 s8 : ffffffe067d73e18 s9 : ffffffe067d74e00 s10: ffffffe00eef96e8 s11: 000000ae6cdf8368 t3 : 5ae9db91c19bbe00 t4 : ffffffc4043cafb2 t5 : ffffffc4043cafba t6 : 0000000000040000 status: 0000000000000120 badaddr: 000000002749f0d0 cause: 000000000000000f Call Trace: [<ffffffe00008c8b0>] schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 [<ffffffe000005570>] ret_from_exception+0x0/0x14 Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace b5f8f9231dc87dda ]--- The issue comes from the put_user() in schedule_tail (kernel/sched/core.c) doing the following: asmlinkage __visible void schedule_tail(struct task_struct *prev) { ... if (current->set_child_tid) put_user(task_pid_vnr(current), current->set_child_tid); ... } the put_user() macro causes the code sequence to come out as follows: 1: __enable_user_access() 2: reg = task_pid_vnr(current); 3: *current->set_child_tid = reg; 4: __disable_user_access() The problem is that we may have a sleeping function as argument which could clear SR_SUM causing the panic above. This was fixed by evaluating the argument of the put_user() macro outside the user-enabled section in commit 285a76bb2cf5 ("riscv: evaluate put_user() arg before enabling user access")" In order for riscv to take advantage of unsafe_get/put_XXX() macros and to avoid the same issue we had with put_user() and sleeping functions we must ensure code flow can go through switch_to() from within a region of code with SR_SUM enabled and come back with SR_SUM still enabled. This patch addresses the problem allowing future work to enable full use of unsafe_get/put_XXX() macros without needing to take a CSR bit flip cost on every access. Make switch_to() save and restore SR_SUM. |
| CVE-2025-38161 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix error flow upon firmware failure for RQ destruction Upon RQ destruction if the firmware command fails which is the last resource to be destroyed some SW resources were already cleaned regardless of the failure. Now properly rollback the object to its original state upon such failure. In order to avoid a use-after free in case someone tries to destroy the object again, which results in the following kernel trace: refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 37589 at lib/refcount.c:28 refcount_warn_saturate+0xf4/0x148 Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) rfkill mlx5_core(OE) mlxdevm(OE) ib_uverbs(OE) ib_core(OE) psample mlxfw(OE) mlx_compat(OE) macsec tls pci_hyperv_intf sunrpc vfat fat virtio_net net_failover failover fuse loop nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_console virtio_gpu virtio_blk virtio_dma_buf virtio_mmio dm_mirror dm_region_hash dm_log dm_mod xpmem(OE) CPU: 0 UID: 0 PID: 37589 Comm: python3 Kdump: loaded Tainted: G OE ------- --- 6.12.0-54.el10.aarch64 #1 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : refcount_warn_saturate+0xf4/0x148 lr : refcount_warn_saturate+0xf4/0x148 sp : ffff80008b81b7e0 x29: ffff80008b81b7e0 x28: ffff000133d51600 x27: 0000000000000001 x26: 0000000000000000 x25: 00000000ffffffea x24: ffff00010ae80f00 x23: ffff00010ae80f80 x22: ffff0000c66e5d08 x21: 0000000000000000 x20: ffff0000c66e0000 x19: ffff00010ae80340 x18: 0000000000000006 x17: 0000000000000000 x16: 0000000000000020 x15: ffff80008b81b37f x14: 0000000000000000 x13: 2e656572662d7265 x12: ffff80008283ef78 x11: ffff80008257efd0 x10: ffff80008283efd0 x9 : ffff80008021ed90 x8 : 0000000000000001 x7 : 00000000000bffe8 x6 : c0000000ffff7fff x5 : ffff0001fb8e3408 x4 : 0000000000000000 x3 : ffff800179993000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000133d51600 Call trace: refcount_warn_saturate+0xf4/0x148 mlx5_core_put_rsc+0x88/0xa0 [mlx5_ib] mlx5_core_destroy_rq_tracked+0x64/0x98 [mlx5_ib] mlx5_ib_destroy_wq+0x34/0x80 [mlx5_ib] ib_destroy_wq_user+0x30/0xc0 [ib_core] uverbs_free_wq+0x28/0x58 [ib_uverbs] destroy_hw_idr_uobject+0x34/0x78 [ib_uverbs] uverbs_destroy_uobject+0x48/0x240 [ib_uverbs] __uverbs_cleanup_ufile+0xd4/0x1a8 [ib_uverbs] uverbs_destroy_ufile_hw+0x48/0x120 [ib_uverbs] ib_uverbs_close+0x2c/0x100 [ib_uverbs] __fput+0xd8/0x2f0 __fput_sync+0x50/0x70 __arm64_sys_close+0x40/0x90 invoke_syscall.constprop.0+0x74/0xd0 do_el0_svc+0x48/0xe8 el0_svc+0x44/0x1d0 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x1a4/0x1a8 |
| CVE-2025-38064 | In the Linux kernel, the following vulnerability has been resolved: virtio: break and reset virtio devices on device_shutdown() Hongyu reported a hang on kexec in a VM. QEMU reported invalid memory accesses during the hang. Invalid read at addr 0x102877002, size 2, region '(null)', reason: rejected Invalid write at addr 0x102877A44, size 2, region '(null)', reason: rejected ... It was traced down to virtio-console. Kexec works fine if virtio-console is not in use. The issue is that virtio-console continues to write to the MMIO even after underlying virtio-pci device is reset. Additionally, Eric noticed that IOMMUs are reset before devices, if devices are not reset on shutdown they continue to poke at guest memory and get errors from the IOMMU. Some devices get wedged then. The problem can be solved by breaking all virtio devices on virtio bus shutdown, then resetting them. |
| CVE-2025-38048 | In the Linux kernel, the following vulnerability has been resolved: virtio_ring: Fix data race by tagging event_triggered as racy for KCSAN syzbot reports a data-race when accessing the event_triggered, here is the simplified stack when the issue occurred: ================================================================== BUG: KCSAN: data-race in virtqueue_disable_cb / virtqueue_enable_cb_delayed write to 0xffff8881025bc452 of 1 bytes by task 3288 on cpu 0: virtqueue_enable_cb_delayed+0x42/0x3c0 drivers/virtio/virtio_ring.c:2653 start_xmit+0x230/0x1310 drivers/net/virtio_net.c:3264 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3800 [inline] read to 0xffff8881025bc452 of 1 bytes by interrupt on cpu 1: virtqueue_disable_cb_split drivers/virtio/virtio_ring.c:880 [inline] virtqueue_disable_cb+0x92/0x180 drivers/virtio/virtio_ring.c:2566 skb_xmit_done+0x5f/0x140 drivers/net/virtio_net.c:777 vring_interrupt+0x161/0x190 drivers/virtio/virtio_ring.c:2715 __handle_irq_event_percpu+0x95/0x490 kernel/irq/handle.c:158 handle_irq_event_percpu kernel/irq/handle.c:193 [inline] value changed: 0x01 -> 0x00 ================================================================== When the data race occurs, the function virtqueue_enable_cb_delayed() sets event_triggered to false, and virtqueue_disable_cb_split/packed() reads it as false due to the race condition. Since event_triggered is an unreliable hint used for optimization, this should only cause the driver temporarily suggest that the device not send an interrupt notification when the event index is used. Fix this KCSAN reported data-race issue by explicitly tagging the access as data_racy. |
| CVE-2025-37955 | In the Linux kernel, the following vulnerability has been resolved: virtio-net: free xsk_buffs on error in virtnet_xsk_pool_enable() The selftests added to our CI by Bui Quang Minh recently reveals that there is a mem leak on the error path of virtnet_xsk_pool_enable(): unreferenced object 0xffff88800a68a000 (size 2048): comm "xdp_helper", pid 318, jiffies 4294692778 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): __kvmalloc_node_noprof+0x402/0x570 virtnet_xsk_pool_enable+0x293/0x6a0 (drivers/net/virtio_net.c:5882) xp_assign_dev+0x369/0x670 (net/xdp/xsk_buff_pool.c:226) xsk_bind+0x6a5/0x1ae0 __sys_bind+0x15e/0x230 __x64_sys_bind+0x72/0xb0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| CVE-2025-37805 | In the Linux kernel, the following vulnerability has been resolved: sound/virtio: Fix cancel_sync warnings on uninitialized work_structs Betty reported hitting the following warning: [ 8.709131][ T221] WARNING: CPU: 2 PID: 221 at kernel/workqueue.c:4182 ... [ 8.713282][ T221] Call trace: [ 8.713365][ T221] __flush_work+0x8d0/0x914 [ 8.713468][ T221] __cancel_work_sync+0xac/0xfc [ 8.713570][ T221] cancel_work_sync+0x24/0x34 [ 8.713667][ T221] virtsnd_remove+0xa8/0xf8 [virtio_snd ab15f34d0dd772f6d11327e08a81d46dc9c36276] [ 8.713868][ T221] virtsnd_probe+0x48c/0x664 [virtio_snd ab15f34d0dd772f6d11327e08a81d46dc9c36276] [ 8.714035][ T221] virtio_dev_probe+0x28c/0x390 [ 8.714139][ T221] really_probe+0x1bc/0x4c8 ... It seems we're hitting the error path in virtsnd_probe(), which triggers a virtsnd_remove() which iterates over the substreams calling cancel_work_sync() on the elapsed_period work_struct. Looking at the code, from earlier in: virtsnd_probe()->virtsnd_build_devs()->virtsnd_pcm_parse_cfg() We set snd->nsubstreams, allocate the snd->substreams, and if we then hit an error on the info allocation or something in virtsnd_ctl_query_info() fails, we will exit without having initialized the elapsed_period work_struct. When that error path unwinds we then call virtsnd_remove() which as long as the substreams array is allocated, will iterate through calling cancel_work_sync() on the uninitialized work struct hitting this warning. Takashi Iwai suggested this fix, which initializes the substreams structure right after allocation, so that if we hit the error paths we avoid trying to cleanup uninitialized data. Note: I have not yet managed to reproduce the issue myself, so this patch has had limited testing. Feedback or thoughts would be appreciated! |
| CVE-2025-37779 | In the Linux kernel, the following vulnerability has been resolved: lib/iov_iter: fix to increase non slab folio refcount When testing EROFS file-backed mount over v9fs on qemu, I encountered a folio UAF issue. The page sanity check reports the following call trace. The root cause is that pages in bvec are coalesced across a folio bounary. The refcount of all non-slab folios should be increased to ensure p9_releas_pages can put them correctly. BUG: Bad page state in process md5sum pfn:18300 page: refcount:0 mapcount:0 mapping:00000000d5ad8e4e index:0x60 pfn:0x18300 head: order:0 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 aops:z_erofs_aops ino:30b0f dentry name(?):"GoogleExtServicesCn.apk" flags: 0x100000000000041(locked|head|node=0|zone=1) raw: 0100000000000041 dead000000000100 dead000000000122 ffff888014b13bd0 raw: 0000000000000060 0000000000000020 00000000ffffffff 0000000000000000 head: 0100000000000041 dead000000000100 dead000000000122 ffff888014b13bd0 head: 0000000000000060 0000000000000020 00000000ffffffff 0000000000000000 head: 0100000000000000 0000000000000000 ffffffffffffffff 0000000000000000 head: 0000000000000010 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set Call Trace: dump_stack_lvl+0x53/0x70 bad_page+0xd4/0x220 __free_pages_ok+0x76d/0xf30 __folio_put+0x230/0x320 p9_release_pages+0x179/0x1f0 p9_virtio_zc_request+0xa2a/0x1230 p9_client_zc_rpc.constprop.0+0x247/0x700 p9_client_read_once+0x34d/0x810 p9_client_read+0xf3/0x150 v9fs_issue_read+0x111/0x360 netfs_unbuffered_read_iter_locked+0x927/0x1390 netfs_unbuffered_read_iter+0xa2/0xe0 vfs_iocb_iter_read+0x2c7/0x460 erofs_fileio_rq_submit+0x46b/0x5b0 z_erofs_runqueue+0x1203/0x21e0 z_erofs_readahead+0x579/0x8b0 read_pages+0x19f/0xa70 page_cache_ra_order+0x4ad/0xb80 filemap_readahead.isra.0+0xe7/0x150 filemap_get_pages+0x7aa/0x1890 filemap_read+0x320/0xc80 vfs_read+0x6c6/0xa30 ksys_read+0xf9/0x1c0 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x71/0x79 |
| CVE-2025-37762 | In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix missed dmabuf unpinning in error path of prepare_fb() Correct error handling in prepare_fb() to fix leaking resources when error happens. |
| CVE-2025-23135 | In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Teardown riscv specific bits after kvm_exit During a module removal, kvm_exit invokes arch specific disable call which disables AIA. However, we invoke aia_exit before kvm_exit resulting in the following warning. KVM kernel module can't be inserted afterwards due to inconsistent state of IRQ. [25469.031389] percpu IRQ 31 still enabled on CPU0! [25469.031732] WARNING: CPU: 3 PID: 943 at kernel/irq/manage.c:2476 __free_percpu_irq+0xa2/0x150 [25469.031804] Modules linked in: kvm(-) [25469.031848] CPU: 3 UID: 0 PID: 943 Comm: rmmod Not tainted 6.14.0-rc5-06947-g91c763118f47-dirty #2 [25469.031905] Hardware name: riscv-virtio,qemu (DT) [25469.031928] epc : __free_percpu_irq+0xa2/0x150 [25469.031976] ra : __free_percpu_irq+0xa2/0x150 [25469.032197] epc : ffffffff8007db1e ra : ffffffff8007db1e sp : ff2000000088bd50 [25469.032241] gp : ffffffff8131cef8 tp : ff60000080b96400 t0 : ff2000000088baf8 [25469.032285] t1 : fffffffffffffffc t2 : 5249207570637265 s0 : ff2000000088bd90 [25469.032329] s1 : ff60000098b21080 a0 : 037d527a15eb4f00 a1 : 037d527a15eb4f00 [25469.032372] a2 : 0000000000000023 a3 : 0000000000000001 a4 : ffffffff8122dbf8 [25469.032410] a5 : 0000000000000fff a6 : 0000000000000000 a7 : ffffffff8122dc10 [25469.032448] s2 : ff60000080c22eb0 s3 : 0000000200000022 s4 : 000000000000001f [25469.032488] s5 : ff60000080c22e00 s6 : ffffffff80c351c0 s7 : 0000000000000000 [25469.032582] s8 : 0000000000000003 s9 : 000055556b7fb490 s10: 00007ffff0e12fa0 [25469.032621] s11: 00007ffff0e13e9a t3 : ffffffff81354ac7 t4 : ffffffff81354ac7 [25469.032664] t5 : ffffffff81354ac8 t6 : ffffffff81354ac7 [25469.032698] status: 0000000200000100 badaddr: ffffffff8007db1e cause: 0000000000000003 [25469.032738] [<ffffffff8007db1e>] __free_percpu_irq+0xa2/0x150 [25469.032797] [<ffffffff8007dbfc>] free_percpu_irq+0x30/0x5e [25469.032856] [<ffffffff013a57dc>] kvm_riscv_aia_exit+0x40/0x42 [kvm] [25469.033947] [<ffffffff013b4e82>] cleanup_module+0x10/0x32 [kvm] [25469.035300] [<ffffffff8009b150>] __riscv_sys_delete_module+0x18e/0x1fc [25469.035374] [<ffffffff8000c1ca>] syscall_handler+0x3a/0x46 [25469.035456] [<ffffffff809ec9a4>] do_trap_ecall_u+0x72/0x134 [25469.035536] [<ffffffff809f5e18>] handle_exception+0x148/0x156 Invoke aia_exit and other arch specific cleanup functions after kvm_exit so that disable gets a chance to be called first before exit. |
| CVE-2025-22115 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix block group refcount race in btrfs_create_pending_block_groups() Block group creation is done in two phases, which results in a slightly unintuitive property: a block group can be allocated/deallocated from after btrfs_make_block_group() adds it to the space_info with btrfs_add_bg_to_space_info(), but before creation is completely completed in btrfs_create_pending_block_groups(). As a result, it is possible for a block group to go unused and have 'btrfs_mark_bg_unused' called on it concurrently with 'btrfs_create_pending_block_groups'. This causes a number of issues, which were fixed with the block group flag 'BLOCK_GROUP_FLAG_NEW'. However, this fix is not quite complete. Since it does not use the unused_bg_lock, it is possible for the following race to occur: btrfs_create_pending_block_groups btrfs_mark_bg_unused if list_empty // false list_del_init clear_bit else if (test_bit) // true list_move_tail And we get into the exact same broken ref count and invalid new_bgs state for transaction cleanup that BLOCK_GROUP_FLAG_NEW was designed to prevent. The broken refcount aspect will result in a warning like: [1272.943527] refcount_t: underflow; use-after-free. [1272.943967] WARNING: CPU: 1 PID: 61 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [1272.944731] Modules linked in: btrfs virtio_net xor zstd_compress raid6_pq null_blk [last unloaded: btrfs] [1272.945550] CPU: 1 UID: 0 PID: 61 Comm: kworker/u32:1 Kdump: loaded Tainted: G W 6.14.0-rc5+ #108 [1272.946368] Tainted: [W]=WARN [1272.946585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [1272.947273] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs] [1272.947788] RIP: 0010:refcount_warn_saturate+0xba/0x110 [1272.949532] RSP: 0018:ffffbf1200247df0 EFLAGS: 00010282 [1272.949901] RAX: 0000000000000000 RBX: ffffa14b00e3f800 RCX: 0000000000000000 [1272.950437] RDX: 0000000000000000 RSI: ffffbf1200247c78 RDI: 00000000ffffdfff [1272.950986] RBP: ffffa14b00dc2860 R08: 00000000ffffdfff R09: ffffffff90526268 [1272.951512] R10: ffffffff904762c0 R11: 0000000063666572 R12: ffffa14b00dc28c0 [1272.952024] R13: 0000000000000000 R14: ffffa14b00dc2868 R15: 000001285dcd12c0 [1272.952850] FS: 0000000000000000(0000) GS:ffffa14d33c40000(0000) knlGS:0000000000000000 [1272.953458] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1272.953931] CR2: 00007f838cbda000 CR3: 000000010104e000 CR4: 00000000000006f0 [1272.954474] Call Trace: [1272.954655] <TASK> [1272.954812] ? refcount_warn_saturate+0xba/0x110 [1272.955173] ? __warn.cold+0x93/0xd7 [1272.955487] ? refcount_warn_saturate+0xba/0x110 [1272.955816] ? report_bug+0xe7/0x120 [1272.956103] ? handle_bug+0x53/0x90 [1272.956424] ? exc_invalid_op+0x13/0x60 [1272.956700] ? asm_exc_invalid_op+0x16/0x20 [1272.957011] ? refcount_warn_saturate+0xba/0x110 [1272.957399] btrfs_discard_cancel_work.cold+0x26/0x2b [btrfs] [1272.957853] btrfs_put_block_group.cold+0x5d/0x8e [btrfs] [1272.958289] btrfs_discard_workfn+0x194/0x380 [btrfs] [1272.958729] process_one_work+0x130/0x290 [1272.959026] worker_thread+0x2ea/0x420 [1272.959335] ? __pfx_worker_thread+0x10/0x10 [1272.959644] kthread+0xd7/0x1c0 [1272.959872] ? __pfx_kthread+0x10/0x10 [1272.960172] ret_from_fork+0x30/0x50 [1272.960474] ? __pfx_kthread+0x10/0x10 [1272.960745] ret_from_fork_asm+0x1a/0x30 [1272.961035] </TASK> [1272.961238] ---[ end trace 0000000000000000 ]--- Though we have seen them in the async discard workfn as well. It is most likely to happen after a relocation finishes which cancels discard, tears down the block group, etc. Fix this fully by taking the lock arou ---truncated--- |
| CVE-2025-22069 | In the Linux kernel, the following vulnerability has been resolved: riscv: fgraph: Fix stack layout to match __arch_ftrace_regs argument of ftrace_return_to_handler Naresh Kamboju reported a "Bad frame pointer" kernel warning while running LTP trace ftrace_stress_test.sh in riscv. We can reproduce the same issue with the following command: ``` $ cd /sys/kernel/debug/tracing $ echo 'f:myprobe do_nanosleep%return args1=$retval' > dynamic_events $ echo 1 > events/fprobes/enable $ echo 1 > tracing_on $ sleep 1 ``` And we can get the following kernel warning: [ 127.692888] ------------[ cut here ]------------ [ 127.693755] Bad frame pointer: expected ff2000000065be50, received ba34c141e9594000 [ 127.693755] from func do_nanosleep return to ffffffff800ccb16 [ 127.698699] WARNING: CPU: 1 PID: 129 at kernel/trace/fgraph.c:755 ftrace_return_to_handler+0x1b2/0x1be [ 127.699894] Modules linked in: [ 127.700908] CPU: 1 UID: 0 PID: 129 Comm: sleep Not tainted 6.14.0-rc3-g0ab191c74642 #32 [ 127.701453] Hardware name: riscv-virtio,qemu (DT) [ 127.701859] epc : ftrace_return_to_handler+0x1b2/0x1be [ 127.702032] ra : ftrace_return_to_handler+0x1b2/0x1be [ 127.702151] epc : ffffffff8013b5e0 ra : ffffffff8013b5e0 sp : ff2000000065bd10 [ 127.702221] gp : ffffffff819c12f8 tp : ff60000080853100 t0 : 6e00000000000000 [ 127.702284] t1 : 0000000000000020 t2 : 6e7566206d6f7266 s0 : ff2000000065bd80 [ 127.702346] s1 : ff60000081262000 a0 : 000000000000007b a1 : ffffffff81894f20 [ 127.702408] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 127.702470] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038 [ 127.702530] s2 : ba34c141e9594000 s3 : 0000000000000000 s4 : ff2000000065bdd0 [ 127.702591] s5 : 00007fff8adcf400 s6 : 000055556dc1d8c0 s7 : 0000000000000068 [ 127.702651] s8 : 00007fff8adf5d10 s9 : 000000000000006d s10: 0000000000000001 [ 127.702710] s11: 00005555737377c8 t3 : ffffffff819d899e t4 : ffffffff819d899e [ 127.702769] t5 : ffffffff819d89a0 t6 : ff2000000065bb18 [ 127.702826] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 127.703292] [<ffffffff8013b5e0>] ftrace_return_to_handler+0x1b2/0x1be [ 127.703760] [<ffffffff80017bce>] return_to_handler+0x16/0x26 [ 127.704009] [<ffffffff80017bb8>] return_to_handler+0x0/0x26 [ 127.704057] [<ffffffff800d3352>] common_nsleep+0x42/0x54 [ 127.704117] [<ffffffff800d44a2>] __riscv_sys_clock_nanosleep+0xba/0x10a [ 127.704176] [<ffffffff80901c56>] do_trap_ecall_u+0x188/0x218 [ 127.704295] [<ffffffff8090cc3e>] handle_exception+0x14a/0x156 [ 127.705436] ---[ end trace 0000000000000000 ]--- The reason is that the stack layout for constructing argument for the ftrace_return_to_handler in the return_to_handler does not match the __arch_ftrace_regs structure of riscv, leading to unexpected results. |
| CVE-2025-22024 | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix management of listener transports Currently, when no active threads are running, a root user using nfsdctl command can try to remove a particular listener from the list of previously added ones, then start the server by increasing the number of threads, it leads to the following problem: [ 158.835354] refcount_t: addition on 0; use-after-free. [ 158.835603] WARNING: CPU: 2 PID: 9145 at lib/refcount.c:25 refcount_warn_saturate+0x160/0x1a0 [ 158.836017] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm ib_core nfsd auth_rpcgss nfs_acl lockd grace overlay isofs uinput snd_seq_dummy snd_hrtimer nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables qrtr sunrpc vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops uvc videobuf2_v4l2 videodev videobuf2_common snd_hda_codec_generic mc e1000e snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore sg loop dm_multipath dm_mod nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs libcrc32c crct10dif_ce ghash_ce vmwgfx sha2_ce sha256_arm64 sr_mod sha1_ce cdrom nvme drm_client_lib drm_ttm_helper ttm nvme_core drm_kms_helper nvme_auth drm fuse [ 158.840093] CPU: 2 UID: 0 PID: 9145 Comm: nfsd Kdump: loaded Tainted: G B W 6.13.0-rc6+ #7 [ 158.840624] Tainted: [B]=BAD_PAGE, [W]=WARN [ 158.840802] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.24006586.BA64.2406042154 06/04/2024 [ 158.841220] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 158.841563] pc : refcount_warn_saturate+0x160/0x1a0 [ 158.841780] lr : refcount_warn_saturate+0x160/0x1a0 [ 158.842000] sp : ffff800089be7d80 [ 158.842147] x29: ffff800089be7d80 x28: ffff00008e68c148 x27: ffff00008e68c148 [ 158.842492] x26: ffff0002e3b5c000 x25: ffff600011cd1829 x24: ffff00008653c010 [ 158.842832] x23: ffff00008653c000 x22: 1fffe00011cd1829 x21: ffff00008653c028 [ 158.843175] x20: 0000000000000002 x19: ffff00008653c010 x18: 0000000000000000 [ 158.843505] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 158.843836] x14: 0000000000000000 x13: 0000000000000001 x12: ffff600050a26493 [ 158.844143] x11: 1fffe00050a26492 x10: ffff600050a26492 x9 : dfff800000000000 [ 158.844475] x8 : 00009fffaf5d9b6e x7 : ffff000285132493 x6 : 0000000000000001 [ 158.844823] x5 : ffff000285132490 x4 : ffff600050a26493 x3 : ffff8000805e72bc [ 158.845174] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000098588000 [ 158.845528] Call trace: [ 158.845658] refcount_warn_saturate+0x160/0x1a0 (P) [ 158.845894] svc_recv+0x58c/0x680 [sunrpc] [ 158.846183] nfsd+0x1fc/0x348 [nfsd] [ 158.846390] kthread+0x274/0x2f8 [ 158.846546] ret_from_fork+0x10/0x20 [ 158.846714] ---[ end trace 0000000000000000 ]--- nfsd_nl_listener_set_doit() would manipulate the list of transports of server's sv_permsocks and close the specified listener but the other list of transports (server's sp_xprts list) would not be changed leading to the problem above. Instead, determined if the nfsdctl is trying to remove a listener, in which case, delete all the existing listener transports and re-create all-but-the-removed ones. |
| CVE-2025-21904 | In the Linux kernel, the following vulnerability has been resolved: caif_virtio: fix wrong pointer check in cfv_probe() del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked for NULL before calling it, not cfv->vdev. Also the current implementation is redundant because the pointer cfv->vdev is dereferenced before it is checked for NULL. Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before calling del_vqs(). |
| CVE-2025-21854 | In the Linux kernel, the following vulnerability has been resolved: sockmap, vsock: For connectible sockets allow only connected sockmap expects all vsocks to have a transport assigned, which is expressed in vsock_proto::psock_update_sk_prot(). However, there is an edge case where an unconnected (connectible) socket may lose its previously assigned transport. This is handled with a NULL check in the vsock/BPF recv path. Another design detail is that listening vsocks are not supposed to have any transport assigned at all. Which implies they are not supported by the sockmap. But this is complicated by the fact that a socket, before switching to TCP_LISTEN, may have had some transport assigned during a failed connect() attempt. Hence, we may end up with a listening vsock in a sockmap, which blows up quickly: KASAN: null-ptr-deref in range [0x0000000000000120-0x0000000000000127] CPU: 7 UID: 0 PID: 56 Comm: kworker/7:0 Not tainted 6.14.0-rc1+ Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:vsock_read_skb+0x4b/0x90 Call Trace: sk_psock_verdict_data_ready+0xa4/0x2e0 virtio_transport_recv_pkt+0x1ca8/0x2acc vsock_loopback_work+0x27d/0x3f0 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x35a/0x700 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30 For connectible sockets, instead of relying solely on the state of vsk->transport, tell sockmap to only allow those representing established connections. This aligns with the behaviour for AF_INET and AF_UNIX. |
| CVE-2025-21669 | In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: discard packets if the transport changes If the socket has been de-assigned or assigned to another transport, we must discard any packets received because they are not expected and would cause issues when we access vsk->transport. A possible scenario is described by Hyunwoo Kim in the attached link, where after a first connect() interrupted by a signal, and a second connect() failed, we can find `vsk->transport` at NULL, leading to a NULL pointer dereference. |
| CVE-2025-1290 | A race condition Use-After-Free vulnerability exists in the virtio_transport_space_update function within the Kernel 5.4 on ChromeOS. Concurrent allocation and freeing of the virtio_vsock_sock structure during an AF_VSOCK connect syscall can occur before a worker thread accesses it resulting in a dangling pointer and potential kernel code execution. |
| CVE-2024-8612 | A flaw was found in QEMU, in the virtio-scsi, virtio-blk, and virtio-crypto devices. The size for virtqueue_push as set in virtio_scsi_complete_req / virtio_blk_req_complete / virito_crypto_req_complete could be larger than the true size of the data which has been sent to guest. Once virtqueue_push() finally calls dma_memory_unmap to ummap the in_iov, it may call the address_space_write function to write back the data. Some uninitialized data may exist in the bounce.buffer, leading to an information leak. |
| CVE-2024-8178 | The ctl_write_buffer and ctl_read_buffer functions allocated memory to be returned to userspace, without initializing it. Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host. |
| CVE-2024-7730 | A heap buffer overflow was found in the virtio-snd device in QEMU. When reading input audio in the virtio-snd input callback, virtio_snd_pcm_in_cb, the function did not check whether the iov can fit the data buffer. This issue can trigger an out-of-bounds write if the size of the virtio queue element is equal to virtio_snd_pcm_status, which makes the available space for audio data zero. |
| CVE-2024-6505 | A flaw was found in the virtio-net device in QEMU. When enabling the RSS feature on the virtio-net network card, the indirections_table data within RSS becomes controllable. Setting excessively large values may cause an index out-of-bounds issue, potentially resulting in heap overflow access. This flaw allows a privileged user in the guest to crash the QEMU process on the host. |
| CVE-2024-57946 | In the Linux kernel, the following vulnerability has been resolved: virtio-blk: don't keep queue frozen during system suspend Commit 4ce6e2db00de ("virtio-blk: Ensure no requests in virtqueues before deleting vqs.") replaces queue quiesce with queue freeze in virtio-blk's PM callbacks. And the motivation is to drain inflight IOs before suspending. block layer's queue freeze looks very handy, but it is also easy to cause deadlock, such as, any attempt to call into bio_queue_enter() may run into deadlock if the queue is frozen in current context. There are all kinds of ->suspend() called in suspend context, so keeping queue frozen in the whole suspend context isn't one good idea. And Marek reported lockdep warning[1] caused by virtio-blk's freeze queue in virtblk_freeze(). [1] https://lore.kernel.org/linux-block/ca16370e-d646-4eee-b9cc-87277c89c43c@samsung.com/ Given the motivation is to drain in-flight IOs, it can be done by calling freeze & unfreeze, meantime restore to previous behavior by keeping queue quiesced during suspend. |
| CVE-2024-57939 | In the Linux kernel, the following vulnerability has been resolved: riscv: Fix sleeping in invalid context in die() die() can be called in exception handler, and therefore cannot sleep. However, die() takes spinlock_t which can sleep with PREEMPT_RT enabled. That causes the following warning: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 285, name: mutex preempt_count: 110001, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 UID: 0 PID: 285 Comm: mutex Not tainted 6.12.0-rc7-00022-ge19049cf7d56-dirty #234 Hardware name: riscv-virtio,qemu (DT) Call Trace: dump_backtrace+0x1c/0x24 show_stack+0x2c/0x38 dump_stack_lvl+0x5a/0x72 dump_stack+0x14/0x1c __might_resched+0x130/0x13a rt_spin_lock+0x2a/0x5c die+0x24/0x112 do_trap_insn_illegal+0xa0/0xea _new_vmalloc_restore_context_a0+0xcc/0xd8 Oops - illegal instruction [#1] Switch to use raw_spinlock_t, which does not sleep even with PREEMPT_RT enabled. |
| CVE-2024-57843 | In the Linux kernel, the following vulnerability has been resolved: virtio-net: fix overflow inside virtnet_rq_alloc When the frag just got a page, then may lead to regression on VM. Specially if the sysctl net.core.high_order_alloc_disable value is 1, then the frag always get a page when do refill. Which could see reliable crashes or scp failure (scp a file 100M in size to VM). The issue is that the virtnet_rq_dma takes up 16 bytes at the beginning of a new frag. When the frag size is larger than PAGE_SIZE, everything is fine. However, if the frag is only one page and the total size of the buffer and virtnet_rq_dma is larger than one page, an overflow may occur. The commit f9dac92ba908 ("virtio_ring: enable premapped mode whatever use_dma_api") introduced this problem. And we reverted some commits to fix this in last linux version. Now we try to enable it and fix this bug directly. Here, when the frag size is not enough, we reduce the buffer len to fix this problem. |
| CVE-2024-56674 | In the Linux kernel, the following vulnerability has been resolved: virtio_net: correct netdev_tx_reset_queue() invocation point When virtnet_close is followed by virtnet_open, some TX completions can possibly remain unconsumed, until they are finally processed during the first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash [1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call before RX napi enable") was not sufficient to eliminate all BQL crash cases for virtio-net. This issue can be reproduced with the latest net-next master by running: `while :; do ip l set DEV down; ip l set DEV up; done` under heavy network TX load from inside the machine. netdev_tx_reset_queue() can actually be dropped from virtnet_open path; the device is not stopped in any case. For BQL core part, it's just like traffic nearly ceases to exist for some period. For stall detector added to BQL, even if virtnet_close could somehow lead to some TX completions delayed for long, followed by virtnet_open, we can just take it as stall as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector based on BQL"). Note also that users can still reset stall_max via sysfs. So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now explicitly required in freeze/restore path. This patch adds it to immediately after free_unused_bufs(), following the rule of thumb: netdev_tx_reset_queue() should follow any SKB freeing not followed by netdev_tx_completed_queue(). This seems the most consistent and streamlined approach, and now netdev_tx_reset_queue() runs whenever free_unused_bufs() is done. [1]: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2 Tainted: [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \ BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dql_completed+0x26b/0x290 Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d 4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01 d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009 RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000 RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001 R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40 FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <IRQ> ? die+0x32/0x80 ? do_trap+0xd9/0x100 ? dql_completed+0x26b/0x290 ? dql_completed+0x26b/0x290 ? do_error_trap+0x6d/0xb0 ? dql_completed+0x26b/0x290 ? exc_invalid_op+0x4c/0x60 ? dql_completed+0x26b/0x290 ? asm_exc_invalid_op+0x16/0x20 ? dql_completed+0x26b/0x290 __free_old_xmit+0xff/0x170 [virtio_net] free_old_xmit+0x54/0xc0 [virtio_net] virtnet_poll+0xf4/0xe30 [virtio_net] ? __update_load_avg_cfs_rq+0x264/0x2d0 ? update_curr+0x35/0x260 ? reweight_entity+0x1be/0x260 __napi_poll.constprop.0+0x28/0x1c0 net_rx_action+0x329/0x420 ? enqueue_hrtimer+0x35/0x90 ? trace_hardirqs_on+0x1d/0x80 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xd/0x1a0 handle_softirqs+0x138/0x3e0 do_softirq.part.0+0x89/0xc0 </IRQ> <TASK> __local_bh_enable_ip+0xa7/0xb0 virtnet_open+0xc8/0x310 [virtio_net] __dev_open+0xfa/0x1b0 __dev_change_flags+0x1de/0x250 dev_change_flags+0x22/0x60 do_setlink.isra.0+0x2df/0x10b0 ? rtnetlink_rcv_msg+0x34f/0x3f0 ? netlink_rcv_skb+0x54/0x100 ? netlink_unicas ---truncated--- |
| CVE-2024-56673 | In the Linux kernel, the following vulnerability has been resolved: riscv: mm: Do not call pmd dtor on vmemmap page table teardown The vmemmap's, which is used for RV64 with SPARSEMEM_VMEMMAP, page tables are populated using pmd (page middle directory) hugetables. However, the pmd allocation is not using the generic mechanism used by the VMA code (e.g. pmd_alloc()), or the RISC-V specific create_pgd_mapping()/alloc_pmd_late(). Instead, the vmemmap page table code allocates a page, and calls vmemmap_set_pmd(). This results in that the pmd ctor is *not* called, nor would it make sense to do so. Now, when tearing down a vmemmap page table pmd, the cleanup code would unconditionally, and incorrectly call the pmd dtor, which results in a crash (best case). This issue was found when running the HMM selftests: | tools/testing/selftests/mm# ./test_hmm.sh smoke | ... # when unloading the test_hmm.ko module | page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10915b | flags: 0x1000000000000000(node=0|zone=1) | raw: 1000000000000000 0000000000000000 dead000000000122 0000000000000000 | raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 | page dumped because: VM_BUG_ON_PAGE(ptdesc->pmd_huge_pte) | ------------[ cut here ]------------ | kernel BUG at include/linux/mm.h:3080! | Kernel BUG [#1] | Modules linked in: test_hmm(-) sch_fq_codel fuse drm drm_panel_orientation_quirks backlight dm_mod | CPU: 1 UID: 0 PID: 514 Comm: modprobe Tainted: G W 6.12.0-00982-gf2a4f1682d07 #2 | Tainted: [W]=WARN | Hardware name: riscv-virtio qemu/qemu, BIOS 2024.10 10/01/2024 | epc : remove_pgd_mapping+0xbec/0x1070 | ra : remove_pgd_mapping+0xbec/0x1070 | epc : ffffffff80010a68 ra : ffffffff80010a68 sp : ff20000000a73940 | gp : ffffffff827b2d88 tp : ff6000008785da40 t0 : ffffffff80fbce04 | t1 : 0720072007200720 t2 : 706d756420656761 s0 : ff20000000a73a50 | s1 : ff6000008915cff8 a0 : 0000000000000039 a1 : 0000000000000008 | a2 : ff600003fff0de20 a3 : 0000000000000000 a4 : 0000000000000000 | a5 : 0000000000000000 a6 : c0000000ffffefff a7 : ffffffff824469b8 | s2 : ff1c0000022456c0 s3 : ff1ffffffdbfffff s4 : ff6000008915c000 | s5 : ff6000008915c000 s6 : ff6000008915c000 s7 : ff1ffffffdc00000 | s8 : 0000000000000001 s9 : ff1ffffffdc00000 s10: ffffffff819a31f0 | s11: ffffffffffffffff t3 : ffffffff8000c950 t4 : ff60000080244f00 | t5 : ff60000080244000 t6 : ff20000000a73708 | status: 0000000200000120 badaddr: ffffffff80010a68 cause: 0000000000000003 | [<ffffffff80010a68>] remove_pgd_mapping+0xbec/0x1070 | [<ffffffff80fd238e>] vmemmap_free+0x14/0x1e | [<ffffffff8032e698>] section_deactivate+0x220/0x452 | [<ffffffff8032ef7e>] sparse_remove_section+0x4a/0x58 | [<ffffffff802f8700>] __remove_pages+0x7e/0xba | [<ffffffff803760d8>] memunmap_pages+0x2bc/0x3fe | [<ffffffff02a3ca28>] dmirror_device_remove_chunks+0x2ea/0x518 [test_hmm] | [<ffffffff02a3e026>] hmm_dmirror_exit+0x3e/0x1018 [test_hmm] | [<ffffffff80102c14>] __riscv_sys_delete_module+0x15a/0x2a6 | [<ffffffff80fd020c>] do_trap_ecall_u+0x1f2/0x266 | [<ffffffff80fde0a2>] _new_vmalloc_restore_context_a0+0xc6/0xd2 | Code: bf51 7597 0184 8593 76a5 854a 4097 0029 80e7 2c00 (9002) 7597 | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: Fatal exception in interrupt Add a check to avoid calling the pmd dtor, if the calling context is vmemmap_free(). |
| CVE-2024-56628 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: Add architecture specific huge_pte_clear() When executing mm selftests run_vmtests.sh, there is such an error: BUG: Bad page state in process uffd-unit-tests pfn:00000 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0 flags: 0xffff0000002000(reserved|node=0|zone=0|lastcpupid=0xffff) raw: 00ffff0000002000 ffffbf0000000008 ffffbf0000000008 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set Modules linked in: snd_seq_dummy snd_seq snd_seq_device rfkill vfat fat virtio_balloon efi_pstore virtio_net pstore net_failover failover fuse nfnetlink virtio_scsi virtio_gpu virtio_dma_buf dm_multipath efivarfs CPU: 2 UID: 0 PID: 1913 Comm: uffd-unit-tests Not tainted 6.12.0 #184 Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 Stack : 900000047c8ac000 0000000000000000 9000000000223a7c 900000047c8ac000 900000047c8af690 900000047c8af698 0000000000000000 900000047c8af7d8 900000047c8af7d0 900000047c8af7d0 900000047c8af5b0 0000000000000001 0000000000000001 900000047c8af698 10b3c7d53da40d26 0000010000000000 0000000000000022 0000000fffffffff fffffffffe000000 ffff800000000000 000000000000002f 0000800000000000 000000017a6d4000 90000000028f8940 0000000000000000 0000000000000000 90000000025aa5e0 9000000002905000 0000000000000000 90000000028f8940 ffff800000000000 0000000000000000 0000000000000000 0000000000000000 9000000000223a94 000000012001839c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d ... Call Trace: [<9000000000223a94>] show_stack+0x5c/0x180 [<9000000001c3fd64>] dump_stack_lvl+0x6c/0xa0 [<900000000056aa08>] bad_page+0x1a0/0x1f0 [<9000000000574978>] free_unref_folios+0xbf0/0xd20 [<90000000004e65cc>] folios_put_refs+0x1a4/0x2b8 [<9000000000599a0c>] free_pages_and_swap_cache+0x164/0x260 [<9000000000547698>] tlb_batch_pages_flush+0xa8/0x1c0 [<9000000000547f30>] tlb_finish_mmu+0xa8/0x218 [<9000000000543cb8>] exit_mmap+0x1a0/0x360 [<9000000000247658>] __mmput+0x78/0x200 [<900000000025583c>] do_exit+0x43c/0xde8 [<9000000000256490>] do_group_exit+0x68/0x110 [<9000000000256554>] sys_exit_group+0x1c/0x20 [<9000000001c413b4>] do_syscall+0x94/0x130 [<90000000002216d8>] handle_syscall+0xb8/0x158 Disabling lock debugging due to kernel taint BUG: non-zero pgtables_bytes on freeing mm: -16384 On LoongArch system, invalid huge pte entry should be invalid_pte_table or a single _PAGE_HUGE bit rather than a zero value. And it should be the same with invalid pmd entry, since pmd_none() is called by function free_pgd_range() and pmd_none() return 0 by huge_pte_clear(). So single _PAGE_HUGE bit is also treated as a valid pte table and free_pte_range() will be called in free_pmd_range(). free_pmd_range() pmd = pmd_offset(pud, addr); do { next = pmd_addr_end(addr, end); if (pmd_none_or_clear_bad(pmd)) continue; free_pte_range(tlb, pmd, addr); } while (pmd++, addr = next, addr != end); Here invalid_pte_table is used for both invalid huge pte entry and pmd entry. |
| CVE-2024-53219 | In the Linux kernel, the following vulnerability has been resolved: virtiofs: use pages instead of pointer for kernel direct IO When trying to insert a 10MB kernel module kept in a virtio-fs with cache disabled, the following warning was reported: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ...... Modules linked in: CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:__alloc_pages+0x2bf/0x380 ...... Call Trace: <TASK> ? __warn+0x8e/0x150 ? __alloc_pages+0x2bf/0x380 __kmalloc_large_node+0x86/0x160 __kmalloc+0x33c/0x480 virtio_fs_enqueue_req+0x240/0x6d0 virtio_fs_wake_pending_and_unlock+0x7f/0x190 queue_request_and_unlock+0x55/0x60 fuse_simple_request+0x152/0x2b0 fuse_direct_io+0x5d2/0x8c0 fuse_file_read_iter+0x121/0x160 __kernel_read+0x151/0x2d0 kernel_read+0x45/0x50 kernel_read_file+0x1a9/0x2a0 init_module_from_file+0x6a/0xe0 idempotent_init_module+0x175/0x230 __x64_sys_finit_module+0x5d/0xb0 x64_sys_call+0x1c3/0x9e0 do_syscall_64+0x3d/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ...... </TASK> ---[ end trace 0000000000000000 ]--- The warning is triggered as follows: 1) syscall finit_module() handles the module insertion and it invokes kernel_read_file() to read the content of the module first. 2) kernel_read_file() allocates a 10MB buffer by using vmalloc() and passes it to kernel_read(). kernel_read() constructs a kvec iter by using iov_iter_kvec() and passes it to fuse_file_read_iter(). 3) virtio-fs disables the cache, so fuse_file_read_iter() invokes fuse_direct_io(). As for now, the maximal read size for kvec iter is only limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, so fuse_direct_io() doesn't split the 10MB buffer. It saves the address and the size of the 10MB-sized buffer in out_args[0] of a fuse request and passes the fuse request to virtio_fs_wake_pending_and_unlock(). 4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() to queue the request. Because virtiofs need DMA-able address, so virtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer for all fuse args, copies these args into the bounce buffer and passed the physical address of the bounce buffer to virtiofsd. The total length of these fuse args for the passed fuse request is about 10MB, so copy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter and it triggers the warning in __alloc_pages(): if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)) return NULL; 5) virtio_fs_enqueue_req() will retry the memory allocation in a kworker, but it won't help, because kmalloc() will always return NULL due to the abnormal size and finit_module() will hang forever. A feasible solution is to limit the value of max_read for virtio-fs, so the length passed to kmalloc() will be limited. However it will affect the maximal read size for normal read. And for virtio-fs write initiated from kernel, it has the similar problem but now there is no way to limit fc->max_write in kernel. So instead of limiting both the values of max_read and max_write in kernel, introducing use_pages_for_kvec_io in fuse_conn and setting it as true in virtiofs. When use_pages_for_kvec_io is enabled, fuse will use pages instead of pointer to pass the KVEC_IO data. After switching to pages for KVEC_IO data, these pages will be used for DMA through virtio-fs. If these pages are backed by vmalloc(), {flush|invalidate}_kernel_vmap_range() are necessary to flush or invalidate the cache before the DMA operation. So add two new fields in fuse_args_pages to record the base address of vmalloc area and the condition indicating whether invalidation is needed. Perform the flush in fuse_get_user_pages() for write operations and the invalidation in fuse_release_user_pages() for read operations. It may seem necessary to introduce another fie ---truncated--- |
| CVE-2024-53119 | In the Linux kernel, the following vulnerability has been resolved: virtio/vsock: Fix accept_queue memory leak As the final stages of socket destruction may be delayed, it is possible that virtio_transport_recv_listen() will be called after the accept_queue has been flushed, but before the SOCK_DONE flag has been set. As a result, sockets enqueued after the flush would remain unremoved, leading to a memory leak. vsock_release __vsock_release lock virtio_transport_release virtio_transport_close schedule_delayed_work(close_work) sk_shutdown = SHUTDOWN_MASK (!) flush accept_queue release virtio_transport_recv_pkt vsock_find_bound_socket lock if flag(SOCK_DONE) return virtio_transport_recv_listen child = vsock_create_connected (!) vsock_enqueue_accept(child) release close_work lock virtio_transport_do_close set_flag(SOCK_DONE) virtio_transport_remove_sock vsock_remove_sock vsock_remove_bound release Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during socket destruction. unreferenced object 0xffff888109e3f800 (size 2040): comm "kworker/5:2", pid 371, jiffies 4294940105 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............ backtrace (crc 9e5f4e84): [<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360 [<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120 [<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0 [<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310 [<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0 [<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140 [<ffffffff810fc6ac>] process_one_work+0x20c/0x570 [<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0 [<ffffffff811070dd>] kthread+0xdd/0x110 [<ffffffff81044fdd>] ret_from_fork+0x2d/0x50 [<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30 |
| CVE-2024-53118 | In the Linux kernel, the following vulnerability has been resolved: vsock: Fix sk_error_queue memory leak Kernel queues MSG_ZEROCOPY completion notifications on the error queue. Where they remain, until explicitly recv()ed. To prevent memory leaks, clean up the queue when the socket is destroyed. unreferenced object 0xffff8881028beb00 (size 224): comm "vsock_test", pid 1218, jiffies 4294694897 hex dump (first 32 bytes): 90 b0 21 17 81 88 ff ff 90 b0 21 17 81 88 ff ff ..!.......!..... 00 00 00 00 00 00 00 00 00 b0 21 17 81 88 ff ff ..........!..... backtrace (crc 6c7031ca): [<ffffffff81418ef7>] kmem_cache_alloc_node_noprof+0x2f7/0x370 [<ffffffff81d35882>] __alloc_skb+0x132/0x180 [<ffffffff81d2d32b>] sock_omalloc+0x4b/0x80 [<ffffffff81d3a8ae>] msg_zerocopy_realloc+0x9e/0x240 [<ffffffff81fe5cb2>] virtio_transport_send_pkt_info+0x412/0x4c0 [<ffffffff81fe6183>] virtio_transport_stream_enqueue+0x43/0x50 [<ffffffff81fe0813>] vsock_connectible_sendmsg+0x373/0x450 [<ffffffff81d233d5>] ____sys_sendmsg+0x365/0x3a0 [<ffffffff81d246f4>] ___sys_sendmsg+0x84/0xd0 [<ffffffff81d26f47>] __sys_sendmsg+0x47/0x80 [<ffffffff820d3df3>] do_syscall_64+0x93/0x180 [<ffffffff8220012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| CVE-2024-53117 | In the Linux kernel, the following vulnerability has been resolved: virtio/vsock: Improve MSG_ZEROCOPY error handling Add a missing kfree_skb() to prevent memory leaks. |
| CVE-2024-53110 | In the Linux kernel, the following vulnerability has been resolved: vp_vdpa: fix id_table array not null terminated error Allocate one extra virtio_device_id as null terminator, otherwise vdpa_mgmtdev_get_classes() may iterate multiple times and visit undefined memory. |
| CVE-2024-53100 | In the Linux kernel, the following vulnerability has been resolved: nvme: tcp: avoid race between queue_lock lock and destroy Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during error recovery") added a mutex_lock() call for the queue->queue_lock in nvme_tcp_get_address(). However, the mutex_lock() races with mutex_destroy() in nvme_tcp_free_queue(), and causes the WARN below. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 34077 at kernel/locking/mutex.c:587 __mutex_lock+0xcf0/0x1220 Modules linked in: nvmet_tcp nvmet nvme_tcp nvme_fabrics iw_cm ib_cm ib_core pktcdvd nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables qrtr sunrpc ppdev 9pnet_virtio 9pnet pcspkr netfs parport_pc parport e1000 i2c_piix4 i2c_smbus loop fuse nfnetlink zram bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper xfs drm sym53c8xx floppy nvme scsi_transport_spi nvme_core nvme_auth serio_raw ata_generic pata_acpi dm_multipath qemu_fw_cfg [last unloaded: ib_uverbs] CPU: 3 UID: 0 PID: 34077 Comm: udisksd Not tainted 6.11.0-rc7 #319 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:__mutex_lock+0xcf0/0x1220 Code: 08 84 d2 0f 85 c8 04 00 00 8b 15 ef b6 c8 01 85 d2 0f 85 78 f4 ff ff 48 c7 c6 20 93 ee af 48 c7 c7 60 91 ee af e8 f0 a7 6d fd <0f> 0b e9 5e f4 ff ff 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 RSP: 0018:ffff88811305f760 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88812c652058 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000001 RBP: ffff88811305f8b0 R08: 0000000000000001 R09: ffffed1075c36341 R10: ffff8883ae1b1a0b R11: 0000000000010498 R12: 0000000000000000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88812c652058 FS: 00007f9713ae4980(0000) GS:ffff8883ae180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcd78483c7c CR3: 0000000122c38000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn.cold+0x5b/0x1af ? __mutex_lock+0xcf0/0x1220 ? report_bug+0x1ec/0x390 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x13/0x40 ? asm_exc_invalid_op+0x16/0x20 ? __mutex_lock+0xcf0/0x1220 ? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp] ? __pfx___mutex_lock+0x10/0x10 ? __lock_acquire+0xd6a/0x59e0 ? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp] nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp] ? __pfx_nvme_tcp_get_address+0x10/0x10 [nvme_tcp] nvme_sysfs_show_address+0x81/0xc0 [nvme_core] dev_attr_show+0x42/0x80 ? __asan_memset+0x1f/0x40 sysfs_kf_seq_show+0x1f0/0x370 seq_read_iter+0x2cb/0x1130 ? rw_verify_area+0x3b1/0x590 ? __mutex_lock+0x433/0x1220 vfs_read+0x6a6/0xa20 ? lockdep_hardirqs_on+0x78/0x100 ? __pfx_vfs_read+0x10/0x10 ksys_read+0xf7/0x1d0 ? __pfx_ksys_read+0x10/0x10 ? __x64_sys_openat+0x105/0x1d0 do_syscall_64+0x93/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? __pfx_ksys_read+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on_prepare+0x16d/0x400 ? do_syscall_64+0x9f/0x180 ? lockdep_hardirqs_on+0x78/0x100 ? do_syscall_64+0x9f/0x180 ? do_syscall_64+0x9f/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f9713f55cfa Code: 55 48 89 e5 48 83 ec 20 48 89 55 e8 48 89 75 f0 89 7d f8 e8 e8 74 f8 ff 48 8b 55 e8 48 8b 75 f0 4 ---truncated--- |
| CVE-2024-53092 | In the Linux kernel, the following vulnerability has been resolved: virtio_pci: Fix admin vq cleanup by using correct info pointer vp_modern_avq_cleanup() and vp_del_vqs() clean up admin vq resources by virtio_pci_vq_info pointer. The info pointer of admin vq is stored in vp_dev->admin_vq.info instead of vp_dev->vqs[]. Using the info pointer from vp_dev->vqs[] for admin vq causes a kernel NULL pointer dereference bug. In vp_modern_avq_cleanup() and vp_del_vqs(), get the info pointer from vp_dev->admin_vq.info for admin vq to clean up the resources. Also make info ptr as argument of vp_del_vq() to be symmetric with vp_setup_vq(). vp_reset calls vp_modern_avq_cleanup, and causes the Call Trace: ================================================================== BUG: kernel NULL pointer dereference, address:0000000000000000 ... CPU: 49 UID: 0 PID: 4439 Comm: modprobe Not tainted 6.11.0-rc5 #1 RIP: 0010:vp_reset+0x57/0x90 [virtio_pci] Call Trace: <TASK> ... ? vp_reset+0x57/0x90 [virtio_pci] ? vp_reset+0x38/0x90 [virtio_pci] virtio_reset_device+0x1d/0x30 remove_vq_common+0x1c/0x1a0 [virtio_net] virtnet_remove+0xa1/0xc0 [virtio_net] virtio_dev_remove+0x46/0xa0 ... virtio_pci_driver_exit+0x14/0x810 [virtio_pci] ================================================================== |
| CVE-2024-53091 | In the Linux kernel, the following vulnerability has been resolved: bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx As the introduction of the support for vsock and unix sockets in sockmap, tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK. vsock and af_unix sockets have vsock_sock and unix_sock instead of inet_connection_sock. For these sockets, tls_get_ctx may return an invalid pointer and cause page fault in function tls_sw_ctx_rx. BUG: unable to handle page fault for address: 0000000000040030 Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:sk_psock_strp_data_ready+0x23/0x60 Call Trace: ? __die+0x81/0xc3 ? no_context+0x194/0x350 ? do_page_fault+0x30/0x110 ? async_page_fault+0x3e/0x50 ? sk_psock_strp_data_ready+0x23/0x60 virtio_transport_recv_pkt+0x750/0x800 ? update_load_avg+0x7e/0x620 vsock_loopback_work+0xd0/0x100 process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? __kthread_cancel_work+0x40/0x40 ret_from_fork+0x1f/0x40 v2: - Add IS_ICSK check v3: - Update the commits in Fixes |
| CVE-2024-53082 | In the Linux kernel, the following vulnerability has been resolved: virtio_net: Add hash_key_length check Add hash_key_length check in virtnet_probe() to avoid possible out of bound errors when setting/reading the hash key. |
| CVE-2024-51563 | The virtio_vq_recordon function is subject to a time-of-check to time-of-use (TOCTOU) race condition. |
| CVE-2024-50264 | In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans During loopback communication, a dangling pointer can be created in vsk->trans, potentially leading to a Use-After-Free condition. This issue is resolved by initializing vsk->trans to NULL. |
| CVE-2024-50184 | In the Linux kernel, the following vulnerability has been resolved: virtio_pmem: Check device status before requesting flush If a pmem device is in a bad status, the driver side could wait for host ack forever in virtio_pmem_flush(), causing the system to hang. So add a status check in the beginning of virtio_pmem_flush() to return early if the device is not activated. |
| CVE-2024-50169 | In the Linux kernel, the following vulnerability has been resolved: vsock: Update rx_bytes on read_skb() Make sure virtio_transport_inc_rx_pkt() and virtio_transport_dec_rx_pkt() calls are balanced (i.e. virtio_vsock_sock::rx_bytes doesn't lie) after vsock_transport::read_skb(). While here, also inform the peer that we've freed up space and it has more credit. Failing to update rx_bytes after packet is dequeued leads to a warning on SOCK_STREAM recv(): [ 233.396654] rx_queue is empty, but rx_bytes is non-zero [ 233.396702] WARNING: CPU: 11 PID: 40601 at net/vmw_vsock/virtio_transport_common.c:589 |
| CVE-2024-49949 | In the Linux kernel, the following vulnerability has been resolved: net: avoid potential underflow in qdisc_pkt_len_init() with UFO After commit 7c6d2ecbda83 ("net: be more gentle about silly gso requests coming from user") virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space to cook a bad GSO packet. Then commit cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO") while fixing one issue, allowed user space to cook a GSO packet with the following characteristic : IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28. When this packet arrives in qdisc_pkt_len_init(), we end up with hdr_len = 28 (IPv4 header + UDP header), matching skb->len Then the following sets gso_segs to 0 : gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size); Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/ qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len; This leads to the following crash in fq_codel [1] qdisc_pkt_len_init() is best effort, we only want an estimation of the bytes sent on the wire, not crashing the kernel. This patch is fixing this particular issue, a following one adds more sanity checks for another potential bug. [1] [ 70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm: b358537762 Not tainted 6.11.0-virtme #991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49 All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp) b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx 22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34 mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB Code starting with the faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11 mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09: ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [ 70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS: 000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES: 0000 C ---truncated--- |
| CVE-2024-49948 | In the Linux kernel, the following vulnerability has been resolved: net: add more sanity checks to qdisc_pkt_len_init() One path takes care of SKB_GSO_DODGY, assuming skb->len is bigger than hdr_len. virtio_net_hdr_to_skb() does not fully dissect TCP headers, it only make sure it is at least 20 bytes. It is possible for an user to provide a malicious 'GSO' packet, total length of 80 bytes. - 20 bytes of IPv4 header - 60 bytes TCP header - a small gso_size like 8 virtio_net_hdr_to_skb() would declare this packet as a normal GSO packet, because it would see 40 bytes of payload, bigger than gso_size. We need to make detect this case to not underflow qdisc_skb_cb(skb)->pkt_len. |
| CVE-2024-49947 | In the Linux kernel, the following vulnerability has been resolved: net: test for not too small csum_start in virtio_net_hdr_to_skb() syzbot was able to trigger this warning [1], after injecting a malicious packet through af_packet, setting skb->csum_start and thus the transport header to an incorrect value. We can at least make sure the transport header is after the end of the network header (with a estimated minimal size). [1] [ 67.873027] skb len=4096 headroom=16 headlen=14 tailroom=0 mac=(-1,-1) mac_len=0 net=(16,-6) trans=10 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0xa start=10 offset=0 ip_summed=3 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0800 pkttype=0 iif=0 priority=0x0 mark=0x0 alloc_cpu=10 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 67.877172] dev name=veth0_vlan feat=0x000061164fdd09e9 [ 67.877764] sk family=17 type=3 proto=0 [ 67.878279] skb linear: 00000000: 00 00 10 00 00 00 00 00 0f 00 00 00 08 00 [ 67.879128] skb frag: 00000000: 0e 00 07 00 00 00 28 00 08 80 1c 00 04 00 00 02 [ 67.879877] skb frag: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.880647] skb frag: 00000020: 00 00 02 00 00 00 08 00 1b 00 00 00 00 00 00 00 [ 67.881156] skb frag: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.881753] skb frag: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882173] skb frag: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882790] skb frag: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883171] skb frag: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883733] skb frag: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.884206] skb frag: 00000090: 00 00 00 00 00 00 00 00 00 00 69 70 76 6c 61 6e [ 67.884704] skb frag: 000000a0: 31 00 00 00 00 00 00 00 00 00 2b 00 00 00 00 00 [ 67.885139] skb frag: 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.885677] skb frag: 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886042] skb frag: 000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886408] skb frag: 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887020] skb frag: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887384] skb frag: 00000100: 00 00 [ 67.887878] ------------[ cut here ]------------ [ 67.887908] offset (-6) >= skb_headlen() (14) [ 67.888445] WARNING: CPU: 10 PID: 2088 at net/core/dev.c:3332 skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.889353] Modules linked in: macsec macvtap macvlan hsr wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 libchacha poly1305_x86_64 dummy bridge sr_mod cdrom evdev pcspkr i2c_piix4 9pnet_virtio 9p 9pnet netfs [ 67.890111] CPU: 10 UID: 0 PID: 2088 Comm: b363492833 Not tainted 6.11.0-virtme #1011 [ 67.890183] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 67.890309] RIP: 0010:skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891043] Call Trace: [ 67.891173] <TASK> [ 67.891274] ? __warn (kernel/panic.c:741) [ 67.891320] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891333] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 67.891348] ? handle_bug (arch/x86/kernel/traps.c:239) [ 67.891363] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 67.891372] ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) [ 67.891388] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891399] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891416] ip_do_fragment (net/ipv4/ip_output.c:777 (discriminator 1)) [ 67.891448] ? __ip_local_out (./include/linux/skbuff.h:1146 ./include/net/l3mdev.h:196 ./include/net/l3mdev.h:213 ne ---truncated--- |
| CVE-2024-49863 | In the Linux kernel, the following vulnerability has been resolved: vhost/scsi: null-ptr-dereference in vhost_scsi_get_req() Since commit 3f8ca2e115e5 ("vhost/scsi: Extract common handling code from control queue handler") a null pointer dereference bug can be triggered when guest sends an SCSI AN request. In vhost_scsi_ctl_handle_vq(), `vc.target` is assigned with `&v_req.tmf.lun[1]` within a switch-case block and is then passed to vhost_scsi_get_req() which extracts `vc->req` and `tpg`. However, for a `VIRTIO_SCSI_T_AN_*` request, tpg is not required, so `vc.target` is set to NULL in this branch. Later, in vhost_scsi_get_req(), `vc->target` is dereferenced without being checked, leading to a null pointer dereference bug. This bug can be triggered from guest. When this bug occurs, the vhost_worker process is killed while holding `vq->mutex` and the corresponding tpg will remain occupied indefinitely. Below is the KASAN report: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 840 Comm: poc Not tainted 6.10.0+ #1 Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:vhost_scsi_get_req+0x165/0x3a0 Code: 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 65 30 4c 89 e2 48 c1 ea 03 <0f> b6 04 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 be 01 00 00 RSP: 0018:ffff888017affb50 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88801b000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888017affcb8 RBP: ffff888017affb80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888017affc88 R14: ffff888017affd1c R15: ffff888017993000 FS: 000055556e076500(0000) GS:ffff88806b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200027c0 CR3: 0000000010ed0004 CR4: 0000000000370ef0 Call Trace: <TASK> ? show_regs+0x86/0xa0 ? die_addr+0x4b/0xd0 ? exc_general_protection+0x163/0x260 ? asm_exc_general_protection+0x27/0x30 ? vhost_scsi_get_req+0x165/0x3a0 vhost_scsi_ctl_handle_vq+0x2a4/0xca0 ? __pfx_vhost_scsi_ctl_handle_vq+0x10/0x10 ? __switch_to+0x721/0xeb0 ? __schedule+0xda5/0x5710 ? __kasan_check_write+0x14/0x30 ? _raw_spin_lock+0x82/0xf0 vhost_scsi_ctl_handle_kick+0x52/0x90 vhost_run_work_list+0x134/0x1b0 vhost_task_fn+0x121/0x350 ... </TASK> ---[ end trace 0000000000000000 ]--- Let's add a check in vhost_scsi_get_req. [whitespace fixes] |
| CVE-2024-47717 | In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Don't zero-out PMU snapshot area before freeing data With the latest Linux-6.11-rc3, the below NULL pointer crash is observed when SBI PMU snapshot is enabled for the guest and the guest is forcefully powered-off. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000508 Oops [#1] Modules linked in: kvm CPU: 0 UID: 0 PID: 61 Comm: term-poll Not tainted 6.11.0-rc3-00018-g44d7178dd77a #3 Hardware name: riscv-virtio,qemu (DT) epc : __kvm_write_guest_page+0x94/0xa6 [kvm] ra : __kvm_write_guest_page+0x54/0xa6 [kvm] epc : ffffffff01590e98 ra : ffffffff01590e58 sp : ffff8f80001f39b0 gp : ffffffff81512a60 tp : ffffaf80024872c0 t0 : ffffaf800247e000 t1 : 00000000000007e0 t2 : 0000000000000000 s0 : ffff8f80001f39f0 s1 : 00007fff89ac4000 a0 : ffffffff015dd7e8 a1 : 0000000000000086 a2 : 0000000000000000 a3 : ffffaf8000000000 a4 : ffffaf80024882c0 a5 : 0000000000000000 a6 : ffffaf800328d780 a7 : 00000000000001cc s2 : ffffaf800197bd00 s3 : 00000000000828c4 s4 : ffffaf800248c000 s5 : ffffaf800247d000 s6 : 0000000000001000 s7 : 0000000000001000 s8 : 0000000000000000 s9 : 00007fff861fd500 s10: 0000000000000001 s11: 0000000000800000 t3 : 00000000000004d3 t4 : 00000000000004d3 t5 : ffffffff814126e0 t6 : ffffffff81412700 status: 0000000200000120 badaddr: 0000000000000508 cause: 000000000000000d [<ffffffff01590e98>] __kvm_write_guest_page+0x94/0xa6 [kvm] [<ffffffff015943a6>] kvm_vcpu_write_guest+0x56/0x90 [kvm] [<ffffffff015a175c>] kvm_pmu_clear_snapshot_area+0x42/0x7e [kvm] [<ffffffff015a1972>] kvm_riscv_vcpu_pmu_deinit.part.0+0xe0/0x14e [kvm] [<ffffffff015a2ad0>] kvm_riscv_vcpu_pmu_deinit+0x1a/0x24 [kvm] [<ffffffff0159b344>] kvm_arch_vcpu_destroy+0x28/0x4c [kvm] [<ffffffff0158e420>] kvm_destroy_vcpus+0x5a/0xda [kvm] [<ffffffff0159930c>] kvm_arch_destroy_vm+0x14/0x28 [kvm] [<ffffffff01593260>] kvm_destroy_vm+0x168/0x2a0 [kvm] [<ffffffff015933d4>] kvm_put_kvm+0x3c/0x58 [kvm] [<ffffffff01593412>] kvm_vm_release+0x22/0x2e [kvm] Clearly, the kvm_vcpu_write_guest() function is crashing because it is being called from kvm_pmu_clear_snapshot_area() upon guest tear down. To address the above issue, simplify the kvm_pmu_clear_snapshot_area() to not zero-out PMU snapshot area from kvm_pmu_clear_snapshot_area() because the guest is anyway being tore down. The kvm_pmu_clear_snapshot_area() is also called when guest changes PMU snapshot area of a VCPU but even in this case the previous PMU snaphsot area must not be zeroed-out because the guest might have reclaimed the pervious PMU snapshot area for some other purpose. |
| CVE-2024-47035 | In vring_init of external/headers/include/virtio/virtio_ring.h, there is a possible out of bounds write due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2024-47024 | In vring_size of external/headers/include/virtio/virtio_ring.h, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2024-4693 | A flaw was found in the QEMU Virtio PCI Bindings (hw/virtio/virtio-pci.c). An improper release and use of the irqfd for vector 0 during the boot process leads to a guest triggerable crash via vhost_net_stop(). This flaw allows a malicious guest to crash the QEMU process on the host. |
| CVE-2024-46721 | In the Linux kernel, the following vulnerability has been resolved: apparmor: fix possible NULL pointer dereference profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made from __create_missing_ancestors(..) and 'ent->old' is NULL in aa_replace_profiles(..). In that case, it must return an error code and the code, -ENOENT represents its state that the path of its parent is not existed yet. BUG: kernel NULL pointer dereference, address: 0000000000000030 PGD 0 P4D 0 PREEMPT SMP PTI CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Call Trace: <TASK> ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? kernelmode_fixup_or_oops+0xb2/0x140 ? __bad_area_nosemaphore+0x1a5/0x2c0 ? find_vma+0x34/0x60 ? bad_area_nosemaphore+0x16/0x30 ? do_user_addr_fault+0x2a2/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? aafs_create.constprop.0+0x7f/0x130 ? aafs_create.constprop.0+0x51/0x130 __aafs_profile_mkdir+0x3d6/0x480 aa_replace_profiles+0x83f/0x1270 policy_update+0xe3/0x180 profile_load+0xbc/0x150 ? rw_verify_area+0x47/0x140 vfs_write+0x100/0x480 ? __x64_sys_openat+0x55/0xa0 ? syscall_exit_to_user_mode+0x86/0x260 ksys_write+0x73/0x100 __x64_sys_write+0x19/0x30 x64_sys_call+0x7e/0x25c0 do_syscall_64+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7be9f211c574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574 RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004 RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80 R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas CR2: 0000000000000030 ---[ end trace 0000000000000000 ]--- RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000 ---truncated--- |
| CVE-2024-45063 | The function ctl_write_buffer incorrectly set a flag which resulted in a kernel Use-After-Free when a command finished processing. Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host. |
| CVE-2024-45005 | In the Linux kernel, the following vulnerability has been resolved: KVM: s390: fix validity interception issue when gisa is switched off We might run into a SIE validity if gisa has been disabled either via using kernel parameter "kvm.use_gisa=0" or by setting the related sysfs attribute to N (echo N >/sys/module/kvm/parameters/use_gisa). The validity is caused by an invalid value in the SIE control block's gisa designation. That happens because we pass the uninitialized gisa origin to virt_to_phys() before writing it to the gisa designation. To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0. kvm_s390_get_gisa_desc() is used to determine which gisa designation to set in the SIE control block. A value of 0 in the gisa designation disables gisa usage. The issue surfaces in the host kernel with the following kernel message as soon a new kvm guest start is attemted. kvm: unhandled validity intercept 0x1011 WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm] Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci] CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6 Hardware name: IBM 3931 A01 701 (LPAR) Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm]) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000 000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff 000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412 000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960 Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4 000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70 #000003d93deb011e: af000000 mc 0,0 >000003d93deb0122: a728ffea lhi %r2,-22 000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e 000003d93deb012a: 9101f0b0 tm 176(%r15),1 000003d93deb012e: a774fe48 brc 7,000003d93deafdbe 000003d93deb0132: 40a0f0ae sth %r10,174(%r15) Call Trace: [<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm] ([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]) [<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm] [<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm] [<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm] [<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm] [<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70 [<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0 [<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0 [<000003d9be0f9a90>] system_call+0x70/0x98 Last Breaking-Event-Address: [<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0 |
| CVE-2024-43897 | In the Linux kernel, the following vulnerability has been resolved: net: drop bad gso csum_start and offset in virtio_net_hdr Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb for GSO packets. The function already checks that a checksum requested with VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets this might not hold for segs after segmentation. Syzkaller demonstrated to reach this warning in skb_checksum_help offset = skb_checksum_start_offset(skb); ret = -EINVAL; if (WARN_ON_ONCE(offset >= skb_headlen(skb))) By injecting a TSO packet: WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0 ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774 ip_finish_output_gso net/ipv4/ip_output.c:279 [inline] __ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301 iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4850 [inline] netdev_start_xmit include/linux/netdevice.h:4864 [inline] xmit_one net/core/dev.c:3595 [inline] dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611 __dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261 packet_snd net/packet/af_packet.c:3073 [inline] The geometry of the bad input packet at tcp_gso_segment: [ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0 [ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244 [ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0)) [ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536 ip_summed=3 complete_sw=0 valid=0 level=0) Mitigate with stricter input validation. csum_offset: for GSO packets, deduce the correct value from gso_type. This is already done for USO. Extend it to TSO. Let UFO be: udp[46]_ufo_fragment ignores these fields and always computes the checksum in software. csum_start: finding the real offset requires parsing to the transport header. Do not add a parser, use existing segmentation parsing. Thanks to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded. Again test both TSO and USO. Do not test UFO for the above reason, and do not test UDP tunnel offload. GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit from devices with no checksum offload"), but then still these fields are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no need to test for ip_summed == CHECKSUM_PARTIAL first. This revises an existing fix mentioned in the Fixes tag, which broke small packets with GSO offload, as detected by kselftests. |
| CVE-2024-43873 | In the Linux kernel, the following vulnerability has been resolved: vhost/vsock: always initialize seqpacket_allow There are two issues around seqpacket_allow: 1. seqpacket_allow is not initialized when socket is created. Thus if features are never set, it will be read uninitialized. 2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared, then seqpacket_allow will not be cleared appropriately (existing apps I know about don't usually do this but it's legal and there's no way to be sure no one relies on this). To fix: - initialize seqpacket_allow after allocation - set it unconditionally in set_features |
| CVE-2024-43835 | In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix napi_skb_cache_put warning After the commit bdacf3e34945 ("net: Use nested-BH locking for napi_alloc_cache.") was merged, the following warning began to appear: WARNING: CPU: 5 PID: 1 at net/core/skbuff.c:1451 napi_skb_cache_put+0x82/0x4b0 __warn+0x12f/0x340 napi_skb_cache_put+0x82/0x4b0 napi_skb_cache_put+0x82/0x4b0 report_bug+0x165/0x370 handle_bug+0x3d/0x80 exc_invalid_op+0x1a/0x50 asm_exc_invalid_op+0x1a/0x20 __free_old_xmit+0x1c8/0x510 napi_skb_cache_put+0x82/0x4b0 __free_old_xmit+0x1c8/0x510 __free_old_xmit+0x1c8/0x510 __pfx___free_old_xmit+0x10/0x10 The issue arises because virtio is assuming it's running in NAPI context even when it's not, such as in the netpoll case. To resolve this, modify virtnet_poll_tx() to only set NAPI when budget is available. Same for virtnet_poll_cleantx(), which always assumed that it was in a NAPI context. |
| CVE-2024-43817 | In the Linux kernel, the following vulnerability has been resolved: net: missing check virtio Two missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again 1. After the skb_segment function the buffer may become non-linear (nr_frags != 0), but since the SKBTX_SHARED_FRAG flag is not set anywhere the __skb_linearize function will not be executed, then the buffer will remain non-linear. Then the condition (offset >= skb_headlen(skb)) becomes true, which causes WARN_ON_ONCE in skb_checksum_help. 2. The struct sk_buff and struct virtio_net_hdr members must be mathematically related. (gso_size) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) must be greater than (needed) otherwise WARN_ON_ONCE. (remainder) may be 0 if division is without remainder. offset+2 (4191) > skb_headlen() (1116) WARNING: CPU: 1 PID: 5084 at net/core/dev.c:3303 skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Modules linked in: CPU: 1 PID: 5084 Comm: syz-executor336 Not tainted 6.7.0-rc3-syzkaller-00014-gdf60cee26a2e #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_checksum_help+0x5e2/0x740 net/core/dev.c:3303 Code: 89 e8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 52 01 00 00 44 89 e2 2b 53 74 4c 89 ee 48 c7 c7 40 57 e9 8b e8 af 8f dd f8 90 <0f> 0b 90 90 e9 87 fe ff ff e8 40 0f 6e f9 e9 4b fa ff ff 48 89 ef RSP: 0018:ffffc90003a9f338 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff888025125780 RCX: ffffffff814db209 RDX: ffff888015393b80 RSI: ffffffff814db216 RDI: 0000000000000001 RBP: ffff8880251257f4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000045c R13: 000000000000105f R14: ffff8880251257f0 R15: 000000000000105d FS: 0000555555c24380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000f000 CR3: 0000000023151000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip_do_fragment+0xa1b/0x18b0 net/ipv4/ip_output.c:777 ip_fragment.constprop.0+0x161/0x230 net/ipv4/ip_output.c:584 ip_finish_output_gso net/ipv4/ip_output.c:286 [inline] __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x49c/0x650 net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x13b/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:129 iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ipip6_tunnel_xmit net/ipv6/sit.c:1034 [inline] sit_tunnel_xmit+0xed2/0x28f0 net/ipv6/sit.c:1076 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3545 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3561 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4346 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24ca/0x5240 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Found by Linux Verification Center (linuxtesting.org) with Syzkaller |
| CVE-2024-43110 | The ctl_request_sense function could expose up to three bytes of the kernel heap to userspace. Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host. |
| CVE-2024-42416 | The ctl_report_supported_opcodes function did not sufficiently validate a field provided by userspace, allowing an arbitrary write to a limited amount of kernel help memory. Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host. |
| CVE-2024-42317 | In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: avoid PMD-size page cache if needed xarray can't support arbitrary page cache size. the largest and supported page cache size is defined as MAX_PAGECACHE_ORDER by commit 099d90642a71 ("mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray"). However, it's possible to have 512MB page cache in the huge memory's collapsing path on ARM64 system whose base page size is 64KB. 512MB page cache is breaking the limitation and a warning is raised when the xarray entry is split as shown in the following example. [root@dhcp-10-26-1-207 ~]# cat /proc/1/smaps | grep KernelPageSize KernelPageSize: 64 kB [root@dhcp-10-26-1-207 ~]# cat /tmp/test.c : int main(int argc, char **argv) { const char *filename = TEST_XFS_FILENAME; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret = 0; if (pgsize != 0x10000) { fprintf(stdout, "System with 64KB base page size is required!\n"); return -EPERM; } system("echo 0 > /sys/devices/virtual/bdi/253:0/read_ahead_kb"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open the xfs file */ fd = open(filename, O_RDONLY); assert(fd > 0); /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ, MAP_SHARED, fd, 0); assert(buf != (void *)-1); fprintf(stdout, "mapped buffer at 0x%p\n", buf); /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_NOHUGEPAGE); assert(ret == 0); ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_READ); assert(ret == 0); /* Collapse VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); assert(ret == 0); ret = madvise(buf, TEST_MEM_SIZE, MADV_COLLAPSE); if (ret) { fprintf(stdout, "Error %d to madvise(MADV_COLLAPSE)\n", errno); goto out; } /* Split xarray entry. Write permission is needed */ munmap(buf, TEST_MEM_SIZE); buf = (void *)-1; close(fd); fd = open(filename, O_RDWR); assert(fd > 0); fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); out: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return ret; } [root@dhcp-10-26-1-207 ~]# gcc /tmp/test.c -o /tmp/test [root@dhcp-10-26-1-207 ~]# /tmp/test ------------[ cut here ]------------ WARNING: CPU: 25 PID: 7560 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse \ xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 virtio_net \ sha1_ce net_failover virtio_blk virtio_console failover dimlib virtio_mmio CPU: 25 PID: 7560 Comm: test Kdump: loaded Not tainted 6.10.0-rc7-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x780 sp : ffff8000ac32f660 x29: ffff8000ac32f660 x28: ffff0000e0969eb0 x27: ffff8000ac32f6c0 x26: 0000000000000c40 x25: ffff0000e0969eb0 x24: 000000000000000d x23: ffff8000ac32f6c0 x22: ffffffdfc0700000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0700000 x18: 0000000000000000 x17: 0000000000000000 x16: ffffd5f3708ffc70 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: ffffffffffffffc0 x10: 0000000000000040 x9 : ffffd5f3708e692c x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff0000e0969eb8 x5 : ffffd5f37289e378 x4 : 0000000000000000 x3 : 0000000000000c40 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x780 truncate_inode_partial_folio+0xdc/0x160 truncate_inode_pages_range+0x1b4/0x4a8 truncate_pagecache_range+0x84/0xa ---truncated--- |
| CVE-2024-42243 | In the Linux kernel, the following vulnerability has been resolved: mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray Patch series "mm/filemap: Limit page cache size to that supported by xarray", v2. Currently, xarray can't support arbitrary page cache size. More details can be found from the WARN_ON() statement in xas_split_alloc(). In our test whose code is attached below, we hit the WARN_ON() on ARM64 system where the base page size is 64KB and huge page size is 512MB. The issue was reported long time ago and some discussions on it can be found here [1]. [1] https://www.spinics.net/lists/linux-xfs/msg75404.html In order to fix the issue, we need to adjust MAX_PAGECACHE_ORDER to one supported by xarray and avoid PMD-sized page cache if needed. The code changes are suggested by David Hildenbrand. PATCH[1] adjusts MAX_PAGECACHE_ORDER to that supported by xarray PATCH[2-3] avoids PMD-sized page cache in the synchronous readahead path PATCH[4] avoids PMD-sized page cache for shmem files if needed Test program ============ # cat test.c #define _GNU_SOURCE #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <fcntl.h> #include <errno.h> #include <sys/syscall.h> #include <sys/mman.h> #define TEST_XFS_FILENAME "/tmp/data" #define TEST_SHMEM_FILENAME "/dev/shm/data" #define TEST_MEM_SIZE 0x20000000 int main(int argc, char **argv) { const char *filename; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret; if (pgsize != 0x10000) { fprintf(stderr, "64KB base page size is required\n"); return -EPERM; } system("echo force > /sys/kernel/mm/transparent_hugepage/shmem_enabled"); system("rm -fr /tmp/data"); system("rm -fr /dev/shm/data"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open xfs or shmem file */ filename = TEST_XFS_FILENAME; if (argc > 1 && !strcmp(argv[1], "shmem")) filename = TEST_SHMEM_FILENAME; fd = open(filename, O_CREAT | O_RDWR | O_TRUNC); if (fd < 0) { fprintf(stderr, "Unable to open <%s>\n", filename); return -EIO; } /* Extend file size */ ret = ftruncate(fd, TEST_MEM_SIZE); if (ret) { fprintf(stderr, "Error %d to ftruncate()\n", ret); goto cleanup; } /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (buf == (void *)-1) { fprintf(stderr, "Unable to mmap <%s>\n", filename); goto cleanup; } fprintf(stdout, "mapped buffer at 0x%p\n", buf); ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); if (ret) { fprintf(stderr, "Unable to madvise(MADV_HUGEPAGE)\n"); goto cleanup; } /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_WRITE); if (ret) { fprintf(stderr, "Error %d to madvise(MADV_POPULATE_WRITE)\n", ret); goto cleanup; } /* Punch the file to enforce xarray split */ ret = fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); if (ret) fprintf(stderr, "Error %d to fallocate()\n", ret); cleanup: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return 0; } # gcc test.c -o test # cat /proc/1/smaps | grep KernelPageSize | head -n 1 KernelPageSize: 64 kB # ./test shmem : ------------[ cut here ]------------ WARNING: CPU: 17 PID: 5253 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set nf_tables rfkill nfnetlink vfat fat virtio_balloon \ drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ virtio_net sha1_ce net_failover failover virtio_console virtio_blk \ dimlib virtio_mmio CPU: 17 PID: 5253 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TC ---truncated--- |
| CVE-2024-42241 | In the Linux kernel, the following vulnerability has been resolved: mm/shmem: disable PMD-sized page cache if needed For shmem files, it's possible that PMD-sized page cache can't be supported by xarray. For example, 512MB page cache on ARM64 when the base page size is 64KB can't be supported by xarray. It leads to errors as the following messages indicate when this sort of xarray entry is split. WARNING: CPU: 34 PID: 7578 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: binfmt_misc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 \ nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject \ nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse xfs \ libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_net \ net_failover virtio_console virtio_blk failover dimlib virtio_mmio CPU: 34 PID: 7578 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff8000882af5f0 x29: ffff8000882af5f0 x28: ffff8000882af650 x27: ffff8000882af768 x26: 0000000000000cc0 x25: 000000000000000d x24: ffff00010625b858 x23: ffff8000882af650 x22: ffffffdfc0900000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0900000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000018000000000 x15: 52f8004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 52f8000000000000 x10: 52f8e1c0ffff6000 x9 : ffffbeb9619a681c x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff00010b02ddb0 x5 : ffffbeb96395e378 x4 : 0000000000000000 x3 : 0000000000000cc0 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 shmem_undo_range+0x2bc/0x6a8 shmem_fallocate+0x134/0x430 vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Fix it by disabling PMD-sized page cache when HPAGE_PMD_ORDER is larger than MAX_PAGECACHE_ORDER. As Matthew Wilcox pointed, the page cache in a shmem file isn't represented by a multi-index entry and doesn't have this limitation when the xarry entry is split until commit 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache"). |
| CVE-2024-42134 | In the Linux kernel, the following vulnerability has been resolved: virtio-pci: Check if is_avq is NULL [bug] In the virtio_pci_common.c function vp_del_vqs, vp_dev->is_avq is involved to determine whether it is admin virtqueue, but this function vp_dev->is_avq may be empty. For installations, virtio_pci_legacy does not assign a value to vp_dev->is_avq. [fix] Check whether it is vp_dev->is_avq before use. [test] Test with virsh Attach device Before this patch, the following command would crash the guest system After applying the patch, everything seems to be working fine. |
| CVE-2024-41031 | In the Linux kernel, the following vulnerability has been resolved: mm/filemap: skip to create PMD-sized page cache if needed On ARM64, HPAGE_PMD_ORDER is 13 when the base page size is 64KB. The PMD-sized page cache can't be supported by xarray as the following error messages indicate. ------------[ cut here ]------------ WARNING: CPU: 35 PID: 7484 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm \ fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ sha1_ce virtio_net net_failover virtio_console virtio_blk failover \ dimlib virtio_mmio CPU: 35 PID: 7484 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff800087a4f6c0 x29: ffff800087a4f6c0 x28: ffff800087a4f720 x27: 000000001fffffff x26: 0000000000000c40 x25: 000000000000000d x24: ffff00010625b858 x23: ffff800087a4f720 x22: ffffffdfc0780000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0780000 x18: 000000001ff40000 x17: 00000000ffffffff x16: 0000018000000000 x15: 51ec004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 51ec000000000000 x10: 51ece1c0ffff8000 x9 : ffffbeb961a44d28 x8 : 0000000000000003 x7 : ffffffdfc0456420 x6 : ffff0000e1aa6eb8 x5 : 20bf08b4fe778fca x4 : ffffffdfc0456420 x3 : 0000000000000c40 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 truncate_inode_pages_range+0x1b4/0x4a8 truncate_pagecache_range+0x84/0xa0 xfs_flush_unmap_range+0x70/0x90 [xfs] xfs_file_fallocate+0xfc/0x4d8 [xfs] vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Fix it by skipping to allocate PMD-sized page cache when its size is larger than MAX_PAGECACHE_ORDER. For this specific case, we will fall to regular path where the readahead window is determined by BDI's sysfs file (read_ahead_kb). |
| CVE-2024-40915 | In the Linux kernel, the following vulnerability has been resolved: riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context __kernel_map_pages() is a debug function which clears the valid bit in page table entry for deallocated pages to detect illegal memory accesses to freed pages. This function set/clear the valid bit using __set_memory(). __set_memory() acquires init_mm's semaphore, and this operation may sleep. This is problematic, because __kernel_map_pages() can be called in atomic context, and thus is illegal to sleep. An example warning that this causes: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1578 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd preempt_count: 2, expected: 0 CPU: 0 PID: 2 Comm: kthreadd Not tainted 6.9.0-g1d4c6d784ef6 #37 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff800060dc>] dump_backtrace+0x1c/0x24 [<ffffffff8091ef6e>] show_stack+0x2c/0x38 [<ffffffff8092baf8>] dump_stack_lvl+0x5a/0x72 [<ffffffff8092bb24>] dump_stack+0x14/0x1c [<ffffffff8003b7ac>] __might_resched+0x104/0x10e [<ffffffff8003b7f4>] __might_sleep+0x3e/0x62 [<ffffffff8093276a>] down_write+0x20/0x72 [<ffffffff8000cf00>] __set_memory+0x82/0x2fa [<ffffffff8000d324>] __kernel_map_pages+0x5a/0xd4 [<ffffffff80196cca>] __alloc_pages_bulk+0x3b2/0x43a [<ffffffff8018ee82>] __vmalloc_node_range+0x196/0x6ba [<ffffffff80011904>] copy_process+0x72c/0x17ec [<ffffffff80012ab4>] kernel_clone+0x60/0x2fe [<ffffffff80012f62>] kernel_thread+0x82/0xa0 [<ffffffff8003552c>] kthreadd+0x14a/0x1be [<ffffffff809357de>] ret_from_fork+0xe/0x1c Rewrite this function with apply_to_existing_page_range(). It is fine to not have any locking, because __kernel_map_pages() works with pages being allocated/deallocated and those pages are not changed by anyone else in the meantime. |
| CVE-2024-36933 | In the Linux kernel, the following vulnerability has been resolved: nsh: Restore skb->{protocol,data,mac_header} for outer header in nsh_gso_segment(). syzbot triggered various splats (see [0] and links) by a crafted GSO packet of VIRTIO_NET_HDR_GSO_UDP layering the following protocols: ETH_P_8021AD + ETH_P_NSH + ETH_P_IPV6 + IPPROTO_UDP NSH can encapsulate IPv4, IPv6, Ethernet, NSH, and MPLS. As the inner protocol can be Ethernet, NSH GSO handler, nsh_gso_segment(), calls skb_mac_gso_segment() to invoke inner protocol GSO handlers. nsh_gso_segment() does the following for the original skb before calling skb_mac_gso_segment() 1. reset skb->network_header 2. save the original skb->{mac_heaeder,mac_len} in a local variable 3. pull the NSH header 4. resets skb->mac_header 5. set up skb->mac_len and skb->protocol for the inner protocol. and does the following for the segmented skb 6. set ntohs(ETH_P_NSH) to skb->protocol 7. push the NSH header 8. restore skb->mac_header 9. set skb->mac_header + mac_len to skb->network_header 10. restore skb->mac_len There are two problems in 6-7 and 8-9. (a) After 6 & 7, skb->data points to the NSH header, so the outer header (ETH_P_8021AD in this case) is stripped when skb is sent out of netdev. Also, if NSH is encapsulated by NSH + Ethernet (so NSH-Ethernet-NSH), skb_pull() in the first nsh_gso_segment() will make skb->data point to the middle of the outer NSH or Ethernet header because the Ethernet header is not pulled by the second nsh_gso_segment(). (b) While restoring skb->{mac_header,network_header} in 8 & 9, nsh_gso_segment() does not assume that the data in the linear buffer is shifted. However, udp6_ufo_fragment() could shift the data and change skb->mac_header accordingly as demonstrated by syzbot. If this happens, even the restored skb->mac_header points to the middle of the outer header. It seems nsh_gso_segment() has never worked with outer headers so far. At the end of nsh_gso_segment(), the outer header must be restored for the segmented skb, instead of the NSH header. To do that, let's calculate the outer header position relatively from the inner header and set skb->{data,mac_header,protocol} properly. [0]: BUG: KMSAN: uninit-value in ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline] BUG: KMSAN: uninit-value in ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] BUG: KMSAN: uninit-value in ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668 ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668 ipvlan_start_xmit+0x5c/0x1a0 drivers/net/ipvlan/ipvlan_main.c:222 __netdev_start_xmit include/linux/netdevice.h:4989 [inline] netdev_start_xmit include/linux/netdevice.h:5003 [inline] xmit_one net/core/dev.c:3547 [inline] dev_hard_start_xmit+0x244/0xa10 net/core/dev.c:3563 __dev_queue_xmit+0x33ed/0x51c0 net/core/dev.c:4351 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook mm/slub.c:3819 [inline] slab_alloc_node mm/slub.c:3860 [inline] __do_kmalloc_node mm/slub.c:3980 [inline] __kmalloc_node_track_caller+0x705/0x1000 mm/slub.c:4001 kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582 __ ---truncated--- |
| CVE-2024-35981 | In the Linux kernel, the following vulnerability has been resolved: virtio_net: Do not send RSS key if it is not supported There is a bug when setting the RSS options in virtio_net that can break the whole machine, getting the kernel into an infinite loop. Running the following command in any QEMU virtual machine with virtionet will reproduce this problem: # ethtool -X eth0 hfunc toeplitz This is how the problem happens: 1) ethtool_set_rxfh() calls virtnet_set_rxfh() 2) virtnet_set_rxfh() calls virtnet_commit_rss_command() 3) virtnet_commit_rss_command() populates 4 entries for the rss scatter-gather 4) Since the command above does not have a key, then the last scatter-gatter entry will be zeroed, since rss_key_size == 0. sg_buf_size = vi->rss_key_size; 5) This buffer is passed to qemu, but qemu is not happy with a buffer with zero length, and do the following in virtqueue_map_desc() (QEMU function): if (!sz) { virtio_error(vdev, "virtio: zero sized buffers are not allowed"); 6) virtio_error() (also QEMU function) set the device as broken vdev->broken = true; 7) Qemu bails out, and do not repond this crazy kernel. 8) The kernel is waiting for the response to come back (function virtnet_send_command()) 9) The kernel is waiting doing the following : while (!virtqueue_get_buf(vi->cvq, &tmp) && !virtqueue_is_broken(vi->cvq)) cpu_relax(); 10) None of the following functions above is true, thus, the kernel loops here forever. Keeping in mind that virtqueue_is_broken() does not look at the qemu `vdev->broken`, so, it never realizes that the vitio is broken at QEMU side. Fix it by not sending RSS commands if the feature is not available in the device. |
| CVE-2024-35814 | In the Linux kernel, the following vulnerability has been resolved: swiotlb: Fix double-allocation of slots due to broken alignment handling Commit bbb73a103fbb ("swiotlb: fix a braino in the alignment check fix"), which was a fix for commit 0eee5ae10256 ("swiotlb: fix slot alignment checks"), causes a functional regression with vsock in a virtual machine using bouncing via a restricted DMA SWIOTLB pool. When virtio allocates the virtqueues for the vsock device using dma_alloc_coherent(), the SWIOTLB search can return page-unaligned allocations if 'area->index' was left unaligned by a previous allocation from the buffer: # Final address in brackets is the SWIOTLB address returned to the caller | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1645-1649/7168 (0x98326800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1649-1653/7168 (0x98328800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1653-1657/7168 (0x9832a800) This ends badly (typically buffer corruption and/or a hang) because swiotlb_alloc() is expecting a page-aligned allocation and so blindly returns a pointer to the 'struct page' corresponding to the allocation, therefore double-allocating the first half (2KiB slot) of the 4KiB page. Fix the problem by treating the allocation alignment separately to any additional alignment requirements from the device, using the maximum of the two as the stride to search the buffer slots and taking care to ensure a minimum of page-alignment for buffers larger than a page. This also resolves swiotlb allocation failures occuring due to the inclusion of ~PAGE_MASK in 'iotlb_align_mask' for large allocations and resulting in alignment requirements exceeding swiotlb_max_mapping_size(). |
| CVE-2024-3446 | A double free vulnerability was found in QEMU virtio devices (virtio-gpu, virtio-serial-bus, virtio-crypto), where the mem_reentrancy_guard flag insufficiently protects against DMA reentrancy issues. This issue could allow a malicious privileged guest user to crash the QEMU process on the host, resulting in a denial of service or allow arbitrary code execution within the context of the QEMU process on the host. |
| CVE-2024-31420 | A NULL pointer dereference flaw was found in KubeVirt. This flaw allows an attacker who has access to a virtual machine guest on a node with DownwardMetrics enabled to cause a denial of service by issuing a high number of calls to vm-dump-metrics --virtio and then deleting the virtual machine. |
| CVE-2024-27066 | In the Linux kernel, the following vulnerability has been resolved: virtio: packed: fix unmap leak for indirect desc table When use_dma_api and premapped are true, then the do_unmap is false. Because the do_unmap is false, vring_unmap_extra_packed is not called by detach_buf_packed. if (unlikely(vq->do_unmap)) { curr = id; for (i = 0; i < state->num; i++) { vring_unmap_extra_packed(vq, &vq->packed.desc_extra[curr]); curr = vq->packed.desc_extra[curr].next; } } So the indirect desc table is not unmapped. This causes the unmap leak. So here, we check vq->use_dma_api instead. Synchronously, dma info is updated based on use_dma_api judgment This bug does not occur, because no driver use the premapped with indirect. |
| CVE-2024-26907 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix fortify source warning while accessing Eth segment ------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_ ---truncated--- |
| CVE-2024-26796 | In the Linux kernel, the following vulnerability has been resolved: drivers: perf: ctr_get_width function for legacy is not defined With parameters CONFIG_RISCV_PMU_LEGACY=y and CONFIG_RISCV_PMU_SBI=n linux kernel crashes when you try perf record: $ perf record ls [ 46.749286] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 46.750199] Oops [#1] [ 46.750342] Modules linked in: [ 46.750608] CPU: 0 PID: 107 Comm: perf-exec Not tainted 6.6.0 #2 [ 46.750906] Hardware name: riscv-virtio,qemu (DT) [ 46.751184] epc : 0x0 [ 46.751430] ra : arch_perf_update_userpage+0x54/0x13e [ 46.751680] epc : 0000000000000000 ra : ffffffff8072ee52 sp : ff2000000022b8f0 [ 46.751958] gp : ffffffff81505988 tp : ff6000000290d400 t0 : ff2000000022b9c0 [ 46.752229] t1 : 0000000000000001 t2 : 0000000000000003 s0 : ff2000000022b930 [ 46.752451] s1 : ff600000028fb000 a0 : 0000000000000000 a1 : ff600000028fb000 [ 46.752673] a2 : 0000000ae2751268 a3 : 00000000004fb708 a4 : 0000000000000004 [ 46.752895] a5 : 0000000000000000 a6 : 000000000017ffe3 a7 : 00000000000000d2 [ 46.753117] s2 : ff600000028fb000 s3 : 0000000ae2751268 s4 : 0000000000000000 [ 46.753338] s5 : ffffffff8153e290 s6 : ff600000863b9000 s7 : ff60000002961078 [ 46.753562] s8 : ff60000002961048 s9 : ff60000002961058 s10: 0000000000000001 [ 46.753783] s11: 0000000000000018 t3 : ffffffffffffffff t4 : ffffffffffffffff [ 46.754005] t5 : ff6000000292270c t6 : ff2000000022bb30 [ 46.754179] status: 0000000200000100 badaddr: 0000000000000000 cause: 000000000000000c [ 46.754653] Code: Unable to access instruction at 0xffffffffffffffec. [ 46.754939] ---[ end trace 0000000000000000 ]--- [ 46.755131] note: perf-exec[107] exited with irqs disabled [ 46.755546] note: perf-exec[107] exited with preempt_count 4 This happens because in the legacy case the ctr_get_width function was not defined, but it is used in arch_perf_update_userpage. Also remove extra check in riscv_pmu_ctr_get_width_mask |
| CVE-2024-26753 | In the Linux kernel, the following vulnerability has been resolved: crypto: virtio/akcipher - Fix stack overflow on memcpy sizeof(struct virtio_crypto_akcipher_session_para) is less than sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from stack variable leads stack overflow. Clang reports this issue by commands: make -j CC=clang-14 mrproper >/dev/null 2>&1 make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1 make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/ virtio_crypto_akcipher_algs.o |
| CVE-2024-26644 | In the Linux kernel, the following vulnerability has been resolved: btrfs: don't abort filesystem when attempting to snapshot deleted subvolume If the source file descriptor to the snapshot ioctl refers to a deleted subvolume, we get the following abort: BTRFS: Transaction aborted (error -2) WARNING: CPU: 0 PID: 833 at fs/btrfs/transaction.c:1875 create_pending_snapshot+0x1040/0x1190 [btrfs] Modules linked in: pata_acpi btrfs ata_piix libata scsi_mod virtio_net blake2b_generic xor net_failover virtio_rng failover scsi_common rng_core raid6_pq libcrc32c CPU: 0 PID: 833 Comm: t_snapshot_dele Not tainted 6.7.0-rc6 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:create_pending_snapshot+0x1040/0x1190 [btrfs] RSP: 0018:ffffa09c01337af8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9982053e7c78 RCX: 0000000000000027 RDX: ffff99827dc20848 RSI: 0000000000000001 RDI: ffff99827dc20840 RBP: ffffa09c01337c00 R08: 0000000000000000 R09: ffffa09c01337998 R10: 0000000000000003 R11: ffffffffb96da248 R12: fffffffffffffffe R13: ffff99820535bb28 R14: ffff99820b7bd000 R15: ffff99820381ea80 FS: 00007fe20aadabc0(0000) GS:ffff99827dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559a120b502f CR3: 00000000055b6000 CR4: 00000000000006f0 Call Trace: <TASK> ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? __warn+0x81/0x130 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? report_bug+0x171/0x1a0 ? handle_bug+0x3a/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? create_pending_snapshot+0x1040/0x1190 [btrfs] create_pending_snapshots+0x92/0xc0 [btrfs] btrfs_commit_transaction+0x66b/0xf40 [btrfs] btrfs_mksubvol+0x301/0x4d0 [btrfs] btrfs_mksnapshot+0x80/0xb0 [btrfs] __btrfs_ioctl_snap_create+0x1c2/0x1d0 [btrfs] btrfs_ioctl_snap_create_v2+0xc4/0x150 [btrfs] btrfs_ioctl+0x8a6/0x2650 [btrfs] ? kmem_cache_free+0x22/0x340 ? do_sys_openat2+0x97/0xe0 __x64_sys_ioctl+0x97/0xd0 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7fe20abe83af RSP: 002b:00007ffe6eff1360 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fe20abe83af RDX: 00007ffe6eff23c0 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 00007fe20ad16cd0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe6eff13c0 R14: 00007fe20ad45000 R15: 0000559a120b6d58 </TASK> ---[ end trace 0000000000000000 ]--- BTRFS: error (device vdc: state A) in create_pending_snapshot:1875: errno=-2 No such entry BTRFS info (device vdc: state EA): forced readonly BTRFS warning (device vdc: state EA): Skipping commit of aborted transaction. BTRFS: error (device vdc: state EA) in cleanup_transaction:2055: errno=-2 No such entry This happens because create_pending_snapshot() initializes the new root item as a copy of the source root item. This includes the refs field, which is 0 for a deleted subvolume. The call to btrfs_insert_root() therefore inserts a root with refs == 0. btrfs_get_new_fs_root() then finds the root and returns -ENOENT if refs == 0, which causes create_pending_snapshot() to abort. Fix it by checking the source root's refs before attempting the snapshot, but after locking subvol_sem to avoid racing with deletion. |
| CVE-2024-26616 | In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: avoid use-after-free when chunk length is not 64K aligned [BUG] There is a bug report that, on a ext4-converted btrfs, scrub leads to various problems, including: - "unable to find chunk map" errors BTRFS info (device vdb): scrub: started on devid 1 BTRFS critical (device vdb): unable to find chunk map for logical 2214744064 length 4096 BTRFS critical (device vdb): unable to find chunk map for logical 2214744064 length 45056 This would lead to unrepariable errors. - Use-after-free KASAN reports: ================================================================== BUG: KASAN: slab-use-after-free in __blk_rq_map_sg+0x18f/0x7c0 Read of size 8 at addr ffff8881013c9040 by task btrfs/909 CPU: 0 PID: 909 Comm: btrfs Not tainted 6.7.0-x64v3-dbg #11 c50636e9419a8354555555245df535e380563b2b Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 2023.11-2 12/24/2023 Call Trace: <TASK> dump_stack_lvl+0x43/0x60 print_report+0xcf/0x640 kasan_report+0xa6/0xd0 __blk_rq_map_sg+0x18f/0x7c0 virtblk_prep_rq.isra.0+0x215/0x6a0 [virtio_blk 19a65eeee9ae6fcf02edfad39bb9ddee07dcdaff] virtio_queue_rqs+0xc4/0x310 [virtio_blk 19a65eeee9ae6fcf02edfad39bb9ddee07dcdaff] blk_mq_flush_plug_list.part.0+0x780/0x860 __blk_flush_plug+0x1ba/0x220 blk_finish_plug+0x3b/0x60 submit_initial_group_read+0x10a/0x290 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] flush_scrub_stripes+0x38e/0x430 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] scrub_stripe+0x82a/0xae0 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] scrub_chunk+0x178/0x200 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] scrub_enumerate_chunks+0x4bc/0xa30 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] btrfs_scrub_dev+0x398/0x810 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] btrfs_ioctl+0x4b9/0x3020 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] __x64_sys_ioctl+0xbd/0x100 do_syscall_64+0x5d/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f47e5e0952b - Crash, mostly due to above use-after-free [CAUSE] The converted fs has the following data chunk layout: item 2 key (FIRST_CHUNK_TREE CHUNK_ITEM 2214658048) itemoff 16025 itemsize 80 length 86016 owner 2 stripe_len 65536 type DATA|single For above logical bytenr 2214744064, it's at the chunk end (2214658048 + 86016 = 2214744064). This means btrfs_submit_bio() would split the bio, and trigger endio function for both of the two halves. However scrub_submit_initial_read() would only expect the endio function to be called once, not any more. This means the first endio function would already free the bbio::bio, leaving the bvec freed, thus the 2nd endio call would lead to use-after-free. [FIX] - Make sure scrub_read_endio() only updates bits in its range Since we may read less than 64K at the end of the chunk, we should not touch the bits beyond chunk boundary. - Make sure scrub_submit_initial_read() only to read the chunk range This is done by calculating the real number of sectors we need to read, and add sector-by-sector to the bio. Thankfully the scrub read repair path won't need extra fixes: - scrub_stripe_submit_repair_read() With above fixes, we won't update error bit for range beyond chunk, thus scrub_stripe_submit_repair_read() should never submit any read beyond the chunk. |
| CVE-2024-11614 | An out-of-bounds read vulnerability was found in DPDK's Vhost library checksum offload feature. This issue enables an untrusted or compromised guest to crash the hypervisor's vSwitch by forging Virtio descriptors to cause out-of-bounds reads. This flaw allows an attacker with a malicious VM using a virtio driver to cause the vhost-user side to crash by sending a packet with a Tx checksum offload request and an invalid csum_start offset. |
| CVE-2023-6693 | A stack based buffer overflow was found in the virtio-net device of QEMU. This issue occurs when flushing TX in the virtio_net_flush_tx function if guest features VIRTIO_NET_F_HASH_REPORT, VIRTIO_F_VERSION_1 and VIRTIO_NET_F_MRG_RXBUF are enabled. This could allow a malicious user to overwrite local variables allocated on the stack. Specifically, the `out_sg` variable could be used to read a part of process memory and send it to the wire, causing an information leak. |
| CVE-2023-53135 | In the Linux kernel, the following vulnerability has been resolved: riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode When CONFIG_FRAME_POINTER is unset, the stack unwinding function walk_stackframe randomly reads the stack and then, when KASAN is enabled, it can lead to the following backtrace: [ 0.000000] ================================================================== [ 0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a [ 0.000000] Read of size 8 at addr ffffffff81807c40 by task swapper/0 [ 0.000000] [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f #43 [ 0.000000] Hardware name: riscv-virtio,qemu (DT) [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80007ba8>] walk_stackframe+0x0/0x11a [ 0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff80c49c80>] dump_stack_lvl+0x22/0x36 [ 0.000000] [<ffffffff80c3783e>] print_report+0x198/0x4a8 [ 0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff8015f68a>] kasan_report+0x9a/0xc8 [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff8006e99c>] desc_make_final+0x80/0x84 [ 0.000000] [<ffffffff8009a04e>] stack_trace_save+0x88/0xa6 [ 0.000000] [<ffffffff80099fc2>] filter_irq_stacks+0x72/0x76 [ 0.000000] [<ffffffff8006b95e>] devkmsg_read+0x32a/0x32e [ 0.000000] [<ffffffff8015ec16>] kasan_save_stack+0x28/0x52 [ 0.000000] [<ffffffff8006e998>] desc_make_final+0x7c/0x84 [ 0.000000] [<ffffffff8009a04a>] stack_trace_save+0x84/0xa6 [ 0.000000] [<ffffffff8015ec52>] kasan_set_track+0x12/0x20 [ 0.000000] [<ffffffff8015f22e>] __kasan_slab_alloc+0x58/0x5e [ 0.000000] [<ffffffff8015e7ea>] __kmem_cache_create+0x21e/0x39a [ 0.000000] [<ffffffff80e133ac>] create_boot_cache+0x70/0x9c [ 0.000000] [<ffffffff80e17ab2>] kmem_cache_init+0x6c/0x11e [ 0.000000] [<ffffffff80e00fd6>] mm_init+0xd8/0xfe [ 0.000000] [<ffffffff80e011d8>] start_kernel+0x190/0x3ca [ 0.000000] [ 0.000000] The buggy address belongs to stack of task swapper/0 [ 0.000000] and is located at offset 0 in frame: [ 0.000000] stack_trace_save+0x0/0xa6 [ 0.000000] [ 0.000000] This frame has 1 object: [ 0.000000] [32, 56) 'c' [ 0.000000] [ 0.000000] The buggy address belongs to the physical page: [ 0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07 [ 0.000000] flags: 0x1000(reserved|zone=0) [ 0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000 [ 0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff [ 0.000000] page dumped because: kasan: bad access detected [ 0.000000] [ 0.000000] Memory state around the buggy address: [ 0.000000] ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] >ffffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3 [ 0.000000] ^ [ 0.000000] ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ================================================================== Fix that by using READ_ONCE_NOCHECK when reading the stack in imprecise mode. |
| CVE-2023-53103 | In the Linux kernel, the following vulnerability has been resolved: bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails syzbot reported a warning[1] where the bond device itself is a slave and we try to enslave a non-ethernet device as the first slave which fails but then in the error path when ether_setup() restores the bond device it also clears all flags. In my previous fix[2] I restored the IFF_MASTER flag, but I didn't consider the case that the bond device itself might also be a slave with IFF_SLAVE set, so we need to restore that flag as well. Use the bond_ether_setup helper which does the right thing and restores the bond's flags properly. Steps to reproduce using a nlmon dev: $ ip l add nlmon0 type nlmon $ ip l add bond1 type bond $ ip l add bond2 type bond $ ip l set bond1 master bond2 $ ip l set dev nlmon0 master bond1 $ ip -d l sh dev bond1 22: bond1: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noqueue master bond2 state DOWN mode DEFAULT group default qlen 1000 (now bond1's IFF_SLAVE flag is gone and we'll hit a warning[3] if we try to delete it) [1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef [2] commit 7d5cd2ce5292 ("bonding: correctly handle bonding type change on enslave failure") [3] example warning: [ 27.008664] bond1: (slave nlmon0): The slave device specified does not support setting the MAC address [ 27.008692] bond1: (slave nlmon0): Error -95 calling set_mac_address [ 32.464639] bond1 (unregistering): Released all slaves [ 32.464685] ------------[ cut here ]------------ [ 32.464686] WARNING: CPU: 1 PID: 2004 at net/core/dev.c:10829 unregister_netdevice_many+0x72a/0x780 [ 32.464694] Modules linked in: br_netfilter bridge bonding virtio_net [ 32.464699] CPU: 1 PID: 2004 Comm: ip Kdump: loaded Not tainted 5.18.0-rc3+ #47 [ 32.464703] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 32.464704] RIP: 0010:unregister_netdevice_many+0x72a/0x780 [ 32.464707] Code: 99 fd ff ff ba 90 1a 00 00 48 c7 c6 f4 02 66 96 48 c7 c7 20 4d 35 96 c6 05 fa c7 2b 02 01 e8 be 6f 4a 00 0f 0b e9 73 fd ff ff <0f> 0b e9 5f fd ff ff 80 3d e3 c7 2b 02 00 0f 85 3b fd ff ff ba 59 [ 32.464710] RSP: 0018:ffffa006422d7820 EFLAGS: 00010206 [ 32.464712] RAX: ffff8f6e077140a0 RBX: ffffa006422d7888 RCX: 0000000000000000 [ 32.464714] RDX: ffff8f6e12edbe58 RSI: 0000000000000296 RDI: ffffffff96d4a520 [ 32.464716] RBP: ffff8f6e07714000 R08: ffffffff96d63600 R09: ffffa006422d7728 [ 32.464717] R10: 0000000000000ec0 R11: ffffffff9698c988 R12: ffff8f6e12edb140 [ 32.464719] R13: dead000000000122 R14: dead000000000100 R15: ffff8f6e12edb140 [ 32.464723] FS: 00007f297c2f1740(0000) GS:ffff8f6e5d900000(0000) knlGS:0000000000000000 [ 32.464725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 32.464726] CR2: 00007f297bf1c800 CR3: 00000000115e8000 CR4: 0000000000350ee0 [ 32.464730] Call Trace: [ 32.464763] <TASK> [ 32.464767] rtnl_dellink+0x13e/0x380 [ 32.464776] ? cred_has_capability.isra.0+0x68/0x100 [ 32.464780] ? __rtnl_unlock+0x33/0x60 [ 32.464783] ? bpf_lsm_capset+0x10/0x10 [ 32.464786] ? security_capable+0x36/0x50 [ 32.464790] rtnetlink_rcv_msg+0x14e/0x3b0 [ 32.464792] ? _copy_to_iter+0xb1/0x790 [ 32.464796] ? post_alloc_hook+0xa0/0x160 [ 32.464799] ? rtnl_calcit.isra.0+0x110/0x110 [ 32.464802] netlink_rcv_skb+0x50/0xf0 [ 32.464806] netlink_unicast+0x216/0x340 [ 32.464809] netlink_sendmsg+0x23f/0x480 [ 32.464812] sock_sendmsg+0x5e/0x60 [ 32.464815] ____sys_sendmsg+0x22c/0x270 [ 32.464818] ? import_iovec+0x17/0x20 [ 32.464821] ? sendmsg_copy_msghdr+0x59/0x90 [ 32.464823] ? do_set_pte+0xa0/0xe0 [ 32.464828] ___sys_sendmsg+0x81/0xc0 [ 32.464832] ? mod_objcg_state+0xc6/0x300 [ 32.464835] ? refill_obj_stock+0xa9/0x160 [ 32.464838] ? memcg_slab_free_hook+0x1a5/0x1f0 [ 32.464842] __sys_sendm ---truncated--- |
| CVE-2023-53082 | In the Linux kernel, the following vulnerability has been resolved: vp_vdpa: fix the crash in hot unplug with vp_vdpa While unplugging the vp_vdpa device, it triggers a kernel panic The root cause is: vdpa_mgmtdev_unregister() will accesses modern devices which will cause a use after free. So need to change the sequence in vp_vdpa_remove [ 195.003359] BUG: unable to handle page fault for address: ff4e8beb80199014 [ 195.004012] #PF: supervisor read access in kernel mode [ 195.004486] #PF: error_code(0x0000) - not-present page [ 195.004960] PGD 100000067 P4D 1001b6067 PUD 1001b7067 PMD 1001b8067 PTE 0 [ 195.005578] Oops: 0000 1 PREEMPT SMP PTI [ 195.005968] CPU: 13 PID: 164 Comm: kworker/u56:10 Kdump: loaded Not tainted 5.14.0-252.el9.x86_64 #1 [ 195.006792] Hardware name: Red Hat KVM/RHEL, BIOS edk2-20221207gitfff6d81270b5-2.el9 unknown [ 195.007556] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 195.008059] RIP: 0010:ioread8+0x31/0x80 [ 195.008418] Code: 77 28 48 81 ff 00 00 01 00 76 0b 89 fa ec 0f b6 c0 c3 cc cc cc cc 8b 15 ad 72 93 01 b8 ff 00 00 00 85 d2 75 0f c3 cc cc cc cc <8a> 07 0f b6 c0 c3 cc cc cc cc 83 ea 01 48 83 ec 08 48 89 fe 48 c7 [ 195.010104] RSP: 0018:ff4e8beb8067bab8 EFLAGS: 00010292 [ 195.010584] RAX: ffffffffc05834a0 RBX: ffffffffc05843c0 RCX: ff4e8beb8067bae0 [ 195.011233] RDX: ff1bcbd580f88000 RSI: 0000000000000246 RDI: ff4e8beb80199014 [ 195.011881] RBP: ff1bcbd587e39000 R08: ffffffff916fa2d0 R09: ff4e8beb8067ba68 [ 195.012527] R10: 000000000000001c R11: 0000000000000000 R12: ff1bcbd5a3de9120 [ 195.013179] R13: ffffffffc062d000 R14: 0000000000000080 R15: ff1bcbe402bc7805 [ 195.013826] FS: 0000000000000000(0000) GS:ff1bcbe402740000(0000) knlGS:0000000000000000 [ 195.014564] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 195.015093] CR2: ff4e8beb80199014 CR3: 0000000107dea002 CR4: 0000000000771ee0 [ 195.015741] PKRU: 55555554 [ 195.016001] Call Trace: [ 195.016233] <TASK> [ 195.016434] vp_modern_get_status+0x12/0x20 [ 195.016823] vp_vdpa_reset+0x1b/0x50 [vp_vdpa] [ 195.017238] virtio_vdpa_reset+0x3c/0x48 [virtio_vdpa] [ 195.017709] remove_vq_common+0x1f/0x3a0 [virtio_net] [ 195.018178] virtnet_remove+0x5d/0x70 [virtio_net] [ 195.018618] virtio_dev_remove+0x3d/0x90 [ 195.018986] device_release_driver_internal+0x1aa/0x230 [ 195.019466] bus_remove_device+0xd8/0x150 [ 195.019841] device_del+0x18b/0x3f0 [ 195.020167] ? kernfs_find_ns+0x35/0xd0 [ 195.020526] device_unregister+0x13/0x60 [ 195.020894] unregister_virtio_device+0x11/0x20 [ 195.021311] device_release_driver_internal+0x1aa/0x230 [ 195.021790] bus_remove_device+0xd8/0x150 [ 195.022162] device_del+0x18b/0x3f0 [ 195.022487] device_unregister+0x13/0x60 [ 195.022852] ? vdpa_dev_remove+0x30/0x30 [vdpa] [ 195.023270] vp_vdpa_dev_del+0x12/0x20 [vp_vdpa] [ 195.023694] vdpa_match_remove+0x2b/0x40 [vdpa] [ 195.024115] bus_for_each_dev+0x78/0xc0 [ 195.024471] vdpa_mgmtdev_unregister+0x65/0x80 [vdpa] [ 195.024937] vp_vdpa_remove+0x23/0x40 [vp_vdpa] [ 195.025353] pci_device_remove+0x36/0xa0 [ 195.025719] device_release_driver_internal+0x1aa/0x230 [ 195.026201] pci_stop_bus_device+0x6c/0x90 [ 195.026580] pci_stop_and_remove_bus_device+0xe/0x20 [ 195.027039] disable_slot+0x49/0x90 [ 195.027366] acpiphp_disable_and_eject_slot+0x15/0x90 [ 195.027832] hotplug_event+0xea/0x210 [ 195.028171] ? hotplug_event+0x210/0x210 [ 195.028535] acpiphp_hotplug_notify+0x22/0x80 [ 195.028942] ? hotplug_event+0x210/0x210 [ 195.029303] acpi_device_hotplug+0x8a/0x1d0 [ 195.029690] acpi_hotplug_work_fn+0x1a/0x30 [ 195.030077] process_one_work+0x1e8/0x3c0 [ 195.030451] worker_thread+0x50/0x3b0 [ 195.030791] ? rescuer_thread+0x3a0/0x3a0 [ 195.031165] kthread+0xd9/0x100 [ 195.031459] ? kthread_complete_and_exit+0x20/0x20 [ 195.031899] ret_from_fork+0x22/0x30 [ 195.032233] </TASK> |
| CVE-2023-52995 | In the Linux kernel, the following vulnerability has been resolved: riscv/kprobe: Fix instruction simulation of JALR Set kprobe at 'jalr 1140(ra)' of vfs_write results in the following crash: [ 32.092235] Unable to handle kernel access to user memory without uaccess routines at virtual address 00aaaaaad77b1170 [ 32.093115] Oops [#1] [ 32.093251] Modules linked in: [ 32.093626] CPU: 0 PID: 135 Comm: ftracetest Not tainted 6.2.0-rc2-00013-gb0aa5e5df0cb-dirty #16 [ 32.093985] Hardware name: riscv-virtio,qemu (DT) [ 32.094280] epc : ksys_read+0x88/0xd6 [ 32.094855] ra : ksys_read+0xc0/0xd6 [ 32.095016] epc : ffffffff801cda80 ra : ffffffff801cdab8 sp : ff20000000d7bdc0 [ 32.095227] gp : ffffffff80f14000 tp : ff60000080f9cb40 t0 : ffffffff80f13e80 [ 32.095500] t1 : ffffffff8000c29c t2 : ffffffff800dbc54 s0 : ff20000000d7be60 [ 32.095716] s1 : 0000000000000000 a0 : ffffffff805a64ae a1 : ffffffff80a83708 [ 32.095921] a2 : ffffffff80f160a0 a3 : 0000000000000000 a4 : f229b0afdb165300 [ 32.096171] a5 : f229b0afdb165300 a6 : ffffffff80eeebd0 a7 : 00000000000003ff [ 32.096411] s2 : ff6000007ff76800 s3 : fffffffffffffff7 s4 : 00aaaaaad77b1170 [ 32.096638] s5 : ffffffff80f160a0 s6 : ff6000007ff76800 s7 : 0000000000000030 [ 32.096865] s8 : 00ffffffc3d97be0 s9 : 0000000000000007 s10: 00aaaaaad77c9410 [ 32.097092] s11: 0000000000000000 t3 : ffffffff80f13e48 t4 : ffffffff8000c29c [ 32.097317] t5 : ffffffff8000c29c t6 : ffffffff800dbc54 [ 32.097505] status: 0000000200000120 badaddr: 00aaaaaad77b1170 cause: 000000000000000d [ 32.098011] [<ffffffff801cdb72>] ksys_write+0x6c/0xd6 [ 32.098222] [<ffffffff801cdc06>] sys_write+0x2a/0x38 [ 32.098405] [<ffffffff80003c76>] ret_from_syscall+0x0/0x2 Since the rs1 and rd might be the same one, such as 'jalr 1140(ra)', hence it requires obtaining the target address from rs1 followed by updating rd. [Palmer: Pick Guo's cleanup] |
| CVE-2023-52978 | In the Linux kernel, the following vulnerability has been resolved: riscv: kprobe: Fixup kernel panic when probing an illegal position The kernel would panic when probed for an illegal position. eg: (CONFIG_RISCV_ISA_C=n) echo 'p:hello kernel_clone+0x16 a0=%a0' >> kprobe_events echo 1 > events/kprobes/hello/enable cat trace Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: __do_sys_newfstatat+0xb8/0xb8 CPU: 0 PID: 111 Comm: sh Not tainted 6.2.0-rc1-00027-g2d398fe49a4d #490 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff80007268>] dump_backtrace+0x38/0x48 [<ffffffff80c5e83c>] show_stack+0x50/0x68 [<ffffffff80c6da28>] dump_stack_lvl+0x60/0x84 [<ffffffff80c6da6c>] dump_stack+0x20/0x30 [<ffffffff80c5ecf4>] panic+0x160/0x374 [<ffffffff80c6db94>] generic_handle_arch_irq+0x0/0xa8 [<ffffffff802deeb0>] sys_newstat+0x0/0x30 [<ffffffff800158c0>] sys_clone+0x20/0x30 [<ffffffff800039e8>] ret_from_syscall+0x0/0x4 ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: __do_sys_newfstatat+0xb8/0xb8 ]--- That is because the kprobe's ebreak instruction broke the kernel's original code. The user should guarantee the correction of the probe position, but it couldn't make the kernel panic. This patch adds arch_check_kprobe in arch_prepare_kprobe to prevent an illegal position (Such as the middle of an instruction). |
| CVE-2023-52842 | In the Linux kernel, the following vulnerability has been resolved: virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt() KMSAN reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was stored to memory at: virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline] virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was created at: slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline] virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58 virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline] virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: vsock-loopback vsock_loopback_work ===================================================== The following simple reproducer can cause the issue described above: int main(void) { int sock; struct sockaddr_vm addr = { .svm_family = AF_VSOCK, .svm_cid = VMADDR_CID_ANY, .svm_port = 1234, }; sock = socket(AF_VSOCK, SOCK_STREAM, 0); connect(sock, (struct sockaddr *)&addr, sizeof(addr)); return 0; } This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the `struct virtio_vsock_hdr` are not initialized when a new skb is allocated in `virtio_transport_init_hdr()`. This patch resolves the issue by initializing these fields during allocation. |
| CVE-2023-52839 | In the Linux kernel, the following vulnerability has been resolved: drivers: perf: Do not broadcast to other cpus when starting a counter This command: $ perf record -e cycles:k -e instructions:k -c 10000 -m 64M dd if=/dev/zero of=/dev/null count=1000 gives rise to this kernel warning: [ 444.364395] WARNING: CPU: 0 PID: 104 at kernel/smp.c:775 smp_call_function_many_cond+0x42c/0x436 [ 444.364515] Modules linked in: [ 444.364657] CPU: 0 PID: 104 Comm: perf-exec Not tainted 6.6.0-rc6-00051-g391df82e8ec3-dirty #73 [ 444.364771] Hardware name: riscv-virtio,qemu (DT) [ 444.364868] epc : smp_call_function_many_cond+0x42c/0x436 [ 444.364917] ra : on_each_cpu_cond_mask+0x20/0x32 [ 444.364948] epc : ffffffff8009f9e0 ra : ffffffff8009fa5a sp : ff20000000003800 [ 444.364966] gp : ffffffff81500aa0 tp : ff60000002b83000 t0 : ff200000000038c0 [ 444.364982] t1 : ffffffff815021f0 t2 : 000000000000001f s0 : ff200000000038b0 [ 444.364998] s1 : ff60000002c54d98 a0 : ff60000002a73940 a1 : 0000000000000000 [ 444.365013] a2 : 0000000000000000 a3 : 0000000000000003 a4 : 0000000000000100 [ 444.365029] a5 : 0000000000010100 a6 : 0000000000f00000 a7 : 0000000000000000 [ 444.365044] s2 : 0000000000000000 s3 : ffffffffffffffff s4 : ff60000002c54d98 [ 444.365060] s5 : ffffffff81539610 s6 : ffffffff80c20c48 s7 : 0000000000000000 [ 444.365075] s8 : 0000000000000000 s9 : 0000000000000001 s10: 0000000000000001 [ 444.365090] s11: ffffffff80099394 t3 : 0000000000000003 t4 : 00000000eac0c6e6 [ 444.365104] t5 : 0000000400000000 t6 : ff60000002e010d0 [ 444.365120] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 444.365226] [<ffffffff8009f9e0>] smp_call_function_many_cond+0x42c/0x436 [ 444.365295] [<ffffffff8009fa5a>] on_each_cpu_cond_mask+0x20/0x32 [ 444.365311] [<ffffffff806e90dc>] pmu_sbi_ctr_start+0x7a/0xaa [ 444.365327] [<ffffffff806e880c>] riscv_pmu_start+0x48/0x66 [ 444.365339] [<ffffffff8012111a>] perf_adjust_freq_unthr_context+0x196/0x1ac [ 444.365356] [<ffffffff801237aa>] perf_event_task_tick+0x78/0x8c [ 444.365368] [<ffffffff8003faf4>] scheduler_tick+0xe6/0x25e [ 444.365383] [<ffffffff8008a042>] update_process_times+0x80/0x96 [ 444.365398] [<ffffffff800991ec>] tick_sched_handle+0x26/0x52 [ 444.365410] [<ffffffff800993e4>] tick_sched_timer+0x50/0x98 [ 444.365422] [<ffffffff8008a6aa>] __hrtimer_run_queues+0x126/0x18a [ 444.365433] [<ffffffff8008b350>] hrtimer_interrupt+0xce/0x1da [ 444.365444] [<ffffffff806cdc60>] riscv_timer_interrupt+0x30/0x3a [ 444.365457] [<ffffffff8006afa6>] handle_percpu_devid_irq+0x80/0x114 [ 444.365470] [<ffffffff80065b82>] generic_handle_domain_irq+0x1c/0x2a [ 444.365483] [<ffffffff8045faec>] riscv_intc_irq+0x2e/0x46 [ 444.365497] [<ffffffff808a9c62>] handle_riscv_irq+0x4a/0x74 [ 444.365521] [<ffffffff808aa760>] do_irq+0x7c/0x7e [ 444.365796] ---[ end trace 0000000000000000 ]--- That's because the fix in commit 3fec323339a4 ("drivers: perf: Fix panic in riscv SBI mmap support") was wrong since there is no need to broadcast to other cpus when starting a counter, that's only needed in mmap when the counters could have already been started on other cpus, so simply remove this broadcast. |
| CVE-2023-52797 | In the Linux kernel, the following vulnerability has been resolved: drivers: perf: Check find_first_bit() return value We must check the return value of find_first_bit() before using the return value as an index array since it happens to overflow the array and then panic: [ 107.318430] Kernel BUG [#1] [ 107.319434] CPU: 3 PID: 1238 Comm: kill Tainted: G E 6.6.0-rc6ubuntu-defconfig #2 [ 107.319465] Hardware name: riscv-virtio,qemu (DT) [ 107.319551] epc : pmu_sbi_ovf_handler+0x3a4/0x3ae [ 107.319840] ra : pmu_sbi_ovf_handler+0x52/0x3ae [ 107.319868] epc : ffffffff80a0a77c ra : ffffffff80a0a42a sp : ffffaf83fecda350 [ 107.319884] gp : ffffffff823961a8 tp : ffffaf8083db1dc0 t0 : ffffaf83fecda480 [ 107.319899] t1 : ffffffff80cafe62 t2 : 000000000000ff00 s0 : ffffaf83fecda520 [ 107.319921] s1 : ffffaf83fecda380 a0 : 00000018fca29df0 a1 : ffffffffffffffff [ 107.319936] a2 : 0000000001073734 a3 : 0000000000000004 a4 : 0000000000000000 [ 107.319951] a5 : 0000000000000040 a6 : 000000001d1c8774 a7 : 0000000000504d55 [ 107.319965] s2 : ffffffff82451f10 s3 : ffffffff82724e70 s4 : 000000000000003f [ 107.319980] s5 : 0000000000000011 s6 : ffffaf8083db27c0 s7 : 0000000000000000 [ 107.319995] s8 : 0000000000000001 s9 : 00007fffb45d6558 s10: 00007fffb45d81a0 [ 107.320009] s11: ffffaf7ffff60000 t3 : 0000000000000004 t4 : 0000000000000000 [ 107.320023] t5 : ffffaf7f80000000 t6 : ffffaf8000000000 [ 107.320037] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 107.320081] [<ffffffff80a0a77c>] pmu_sbi_ovf_handler+0x3a4/0x3ae [ 107.320112] [<ffffffff800b42d0>] handle_percpu_devid_irq+0x9e/0x1a0 [ 107.320131] [<ffffffff800ad92c>] generic_handle_domain_irq+0x28/0x36 [ 107.320148] [<ffffffff8065f9f8>] riscv_intc_irq+0x36/0x4e [ 107.320166] [<ffffffff80caf4a0>] handle_riscv_irq+0x54/0x86 [ 107.320189] [<ffffffff80cb0036>] do_irq+0x64/0x96 [ 107.320271] Code: 85a6 855e b097 ff7f 80e7 9220 b709 9002 4501 bbd9 (9002) 6097 [ 107.320585] ---[ end trace 0000000000000000 ]--- [ 107.320704] Kernel panic - not syncing: Fatal exception in interrupt [ 107.320775] SMP: stopping secondary CPUs [ 107.321219] Kernel Offset: 0x0 from 0xffffffff80000000 [ 107.333051] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- |
| CVE-2023-52762 | In the Linux kernel, the following vulnerability has been resolved: virtio-blk: fix implicit overflow on virtio_max_dma_size The following codes have an implicit conversion from size_t to u32: (u32)max_size = (size_t)virtio_max_dma_size(vdev); This may lead overflow, Ex (size_t)4G -> (u32)0. Once virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX instead. |
| CVE-2023-52761 | In the Linux kernel, the following vulnerability has been resolved: riscv: VMAP_STACK overflow detection thread-safe commit 31da94c25aea ("riscv: add VMAP_STACK overflow detection") added support for CONFIG_VMAP_STACK. If overflow is detected, CPU switches to `shadow_stack` temporarily before switching finally to per-cpu `overflow_stack`. If two CPUs/harts are racing and end up in over flowing kernel stack, one or both will end up corrupting each other state because `shadow_stack` is not per-cpu. This patch optimizes per-cpu overflow stack switch by directly picking per-cpu `overflow_stack` and gets rid of `shadow_stack`. Following are the changes in this patch - Defines an asm macro to obtain per-cpu symbols in destination register. - In entry.S, when overflow is detected, per-cpu overflow stack is located using per-cpu asm macro. Computing per-cpu symbol requires a temporary register. x31 is saved away into CSR_SCRATCH (CSR_SCRATCH is anyways zero since we're in kernel). Please see Links for additional relevant disccussion and alternative solution. Tested by `echo EXHAUST_STACK > /sys/kernel/debug/provoke-crash/DIRECT` Kernel crash log below Insufficient stack space to handle exception!/debug/provoke-crash/DIRECT Task stack: [0xff20000010a98000..0xff20000010a9c000] Overflow stack: [0xff600001f7d98370..0xff600001f7d99370] CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) epc : __memset+0x60/0xfc ra : recursive_loop+0x48/0xc6 [lkdtm] epc : ffffffff808de0e4 ra : ffffffff0163a752 sp : ff20000010a97e80 gp : ffffffff815c0330 tp : ff600000820ea280 t0 : ff20000010a97e88 t1 : 000000000000002e t2 : 3233206874706564 s0 : ff20000010a982b0 s1 : 0000000000000012 a0 : ff20000010a97e88 a1 : 0000000000000000 a2 : 0000000000000400 a3 : ff20000010a98288 a4 : 0000000000000000 a5 : 0000000000000000 a6 : fffffffffffe43f0 a7 : 00007fffffffffff s2 : ff20000010a97e88 s3 : ffffffff01644680 s4 : ff20000010a9be90 s5 : ff600000842ba6c0 s6 : 00aaaaaac29e42b0 s7 : 00fffffff0aa3684 s8 : 00aaaaaac2978040 s9 : 0000000000000065 s10: 00ffffff8a7cad10 s11: 00ffffff8a76a4e0 t3 : ffffffff815dbaf4 t4 : ffffffff815dbaf4 t5 : ffffffff815dbab8 t6 : ff20000010a9bb48 status: 0000000200000120 badaddr: ff20000010a97e88 cause: 000000000000000f Kernel panic - not syncing: Kernel stack overflow CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff80006754>] dump_backtrace+0x30/0x38 [<ffffffff808de798>] show_stack+0x40/0x4c [<ffffffff808ea2a8>] dump_stack_lvl+0x44/0x5c [<ffffffff808ea2d8>] dump_stack+0x18/0x20 [<ffffffff808dec06>] panic+0x126/0x2fe [<ffffffff800065ea>] walk_stackframe+0x0/0xf0 [<ffffffff0163a752>] recursive_loop+0x48/0xc6 [lkdtm] SMP: stopping secondary CPUs ---[ end Kernel panic - not syncing: Kernel stack overflow ]--- |
| CVE-2023-52670 | In the Linux kernel, the following vulnerability has been resolved: rpmsg: virtio: Free driver_override when rpmsg_remove() Free driver_override when rpmsg_remove(), otherwise the following memory leak will occur: unreferenced object 0xffff0000d55d7080 (size 128): comm "kworker/u8:2", pid 56, jiffies 4294893188 (age 214.272s) hex dump (first 32 bytes): 72 70 6d 73 67 5f 6e 73 00 00 00 00 00 00 00 00 rpmsg_ns........ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000009c94c9c1>] __kmem_cache_alloc_node+0x1f8/0x320 [<000000002300d89b>] __kmalloc_node_track_caller+0x44/0x70 [<00000000228a60c3>] kstrndup+0x4c/0x90 [<0000000077158695>] driver_set_override+0xd0/0x164 [<000000003e9c4ea5>] rpmsg_register_device_override+0x98/0x170 [<000000001c0c89a8>] rpmsg_ns_register_device+0x24/0x30 [<000000008bbf8fa2>] rpmsg_probe+0x2e0/0x3ec [<00000000e65a68df>] virtio_dev_probe+0x1c0/0x280 [<00000000443331cc>] really_probe+0xbc/0x2dc [<00000000391064b1>] __driver_probe_device+0x78/0xe0 [<00000000a41c9a5b>] driver_probe_device+0xd8/0x160 [<000000009c3bd5df>] __device_attach_driver+0xb8/0x140 [<0000000043cd7614>] bus_for_each_drv+0x7c/0xd4 [<000000003b929a36>] __device_attach+0x9c/0x19c [<00000000a94e0ba8>] device_initial_probe+0x14/0x20 [<000000003c999637>] bus_probe_device+0xa0/0xac |
| CVE-2023-5158 | A flaw was found in vringh_kiov_advance in drivers/vhost/vringh.c in the host side of a virtio ring in the Linux Kernel. This issue may result in a denial of service from guest to host via zero length descriptor. |
| CVE-2023-50227 | Parallels Desktop virtio-gpu Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Parallels Desktop. User interaction is required to exploit this vulnerability in that the target in a guest system must visit a malicious page or open a malicious file. The specific flaw exists within the virtio-gpu virtual device. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the hypervisor. . Was ZDI-CAN-21260. |
| CVE-2023-41051 | In a typical Virtual Machine Monitor (VMM) there are several components, such as boot loader, virtual device drivers, virtio backend drivers and vhost drivers, that need to access the VM physical memory. The vm-memory rust crate provides a set of traits to decouple VM memory consumers from VM memory providers. An issue was discovered in the default implementations of the `VolatileMemory::{get_atomic_ref, aligned_as_ref, aligned_as_mut, get_ref, get_array_ref}` trait functions, which allows out-of-bounds memory access if the `VolatileMemory::get_slice` function returns a `VolatileSlice` whose length is less than the function’s `count` argument. No implementations of `get_slice` provided in `vm_memory` are affected. Users of custom `VolatileMemory` implementations may be impacted if the custom implementation does not adhere to `get_slice`'s documentation. The issue started in version 0.1.0 but was fixed in version 0.12.2 by inserting a check that verifies that the `VolatileSlice` returned by `get_slice` is of the correct length. Users are advised to upgrade. There are no known workarounds for this issue. |
| CVE-2023-3301 | A flaw was found in QEMU. The async nature of hot-unplug enables a race scenario where the net device backend is cleared before the virtio-net pci frontend has been unplugged. A malicious guest could use this time window to trigger an assertion and cause a denial of service. |
| CVE-2023-3180 | A flaw was found in the QEMU virtual crypto device while handling data encryption/decryption requests in virtio_crypto_handle_sym_req. There is no check for the value of `src_len` and `dst_len` in virtio_crypto_sym_op_helper, potentially leading to a heap buffer overflow when the two values differ. |
| CVE-2023-22998 | In the Linux kernel before 6.0.3, drivers/gpu/drm/virtio/virtgpu_object.c misinterprets the drm_gem_shmem_get_sg_table return value (expects it to be NULL in the error case, whereas it is actually an error pointer). |
| CVE-2023-1838 | A use-after-free flaw was found in vhost_net_set_backend in drivers/vhost/net.c in virtio network subcomponent in the Linux kernel due to a double fget. This flaw could allow a local attacker to crash the system, and could even lead to a kernel information leak problem. |
| CVE-2022-50225 | In the Linux kernel, the following vulnerability has been resolved: riscv:uprobe fix SR_SPIE set/clear handling In riscv the process of uprobe going to clear spie before exec the origin insn,and set spie after that.But When access the page which origin insn has been placed a page fault may happen and irq was disabled in arch_uprobe_pre_xol function,It cause a WARN as follows. There is no need to clear/set spie in arch_uprobe_pre/post/abort_xol. We can just remove it. [ 31.684157] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1488 [ 31.684677] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 76, name: work [ 31.684929] preempt_count: 0, expected: 0 [ 31.685969] CPU: 2 PID: 76 Comm: work Tainted: G [ 31.686542] Hardware name: riscv-virtio,qemu (DT) [ 31.686797] Call Trace: [ 31.687053] [<ffffffff80006442>] dump_backtrace+0x30/0x38 [ 31.687699] [<ffffffff80812118>] show_stack+0x40/0x4c [ 31.688141] [<ffffffff8081817a>] dump_stack_lvl+0x44/0x5c [ 31.688396] [<ffffffff808181aa>] dump_stack+0x18/0x20 [ 31.688653] [<ffffffff8003e454>] __might_resched+0x114/0x122 [ 31.688948] [<ffffffff8003e4b2>] __might_sleep+0x50/0x7a [ 31.689435] [<ffffffff80822676>] down_read+0x30/0x130 [ 31.689728] [<ffffffff8000b650>] do_page_fault+0x166/x446 [ 31.689997] [<ffffffff80003c0c>] ret_from_exception+0x0/0xc |
| CVE-2022-50181 | In the Linux kernel, the following vulnerability has been resolved: virtio-gpu: fix a missing check to avoid NULL dereference 'cache_ent' could be set NULL inside virtio_gpu_cmd_get_capset() and it will lead to a NULL dereference by a lately use of it (i.e., ptr = cache_ent->caps_cache). Fix it with a NULL check. [ kraxel: minor codestyle fixup ] |
| CVE-2022-50149 | In the Linux kernel, the following vulnerability has been resolved: driver core: fix potential deadlock in __driver_attach In __driver_attach function, There are also AA deadlock problem, like the commit b232b02bf3c2 ("driver core: fix deadlock in __device_attach"). stack like commit b232b02bf3c2 ("driver core: fix deadlock in __device_attach"). list below: In __driver_attach function, The lock holding logic is as follows: ... __driver_attach if (driver_allows_async_probing(drv)) device_lock(dev) // get lock dev async_schedule_dev(__driver_attach_async_helper, dev); // func async_schedule_node async_schedule_node_domain(func) entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC); /* when fail or work limit, sync to execute func, but __driver_attach_async_helper will get lock dev as will, which will lead to A-A deadlock. */ if (!entry || atomic_read(&entry_count) > MAX_WORK) { func; else queue_work_node(node, system_unbound_wq, &entry->work) device_unlock(dev) As above show, when it is allowed to do async probes, because of out of memory or work limit, async work is not be allowed, to do sync execute instead. it will lead to A-A deadlock because of __driver_attach_async_helper getting lock dev. Reproduce: and it can be reproduce by make the condition (if (!entry || atomic_read(&entry_count) > MAX_WORK)) untenable, like below: [ 370.785650] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 370.787154] task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00004000 [ 370.788865] Call Trace: [ 370.789374] <TASK> [ 370.789841] __schedule+0x482/0x1050 [ 370.790613] schedule+0x92/0x1a0 [ 370.791290] schedule_preempt_disabled+0x2c/0x50 [ 370.792256] __mutex_lock.isra.0+0x757/0xec0 [ 370.793158] __mutex_lock_slowpath+0x1f/0x30 [ 370.794079] mutex_lock+0x50/0x60 [ 370.794795] __device_driver_lock+0x2f/0x70 [ 370.795677] ? driver_probe_device+0xd0/0xd0 [ 370.796576] __driver_attach_async_helper+0x1d/0xd0 [ 370.797318] ? driver_probe_device+0xd0/0xd0 [ 370.797957] async_schedule_node_domain+0xa5/0xc0 [ 370.798652] async_schedule_node+0x19/0x30 [ 370.799243] __driver_attach+0x246/0x290 [ 370.799828] ? driver_allows_async_probing+0xa0/0xa0 [ 370.800548] bus_for_each_dev+0x9d/0x130 [ 370.801132] driver_attach+0x22/0x30 [ 370.801666] bus_add_driver+0x290/0x340 [ 370.802246] driver_register+0x88/0x140 [ 370.802817] ? virtio_scsi_init+0x116/0x116 [ 370.803425] scsi_register_driver+0x1a/0x30 [ 370.804057] init_sd+0x184/0x226 [ 370.804533] do_one_initcall+0x71/0x3a0 [ 370.805107] kernel_init_freeable+0x39a/0x43a [ 370.805759] ? rest_init+0x150/0x150 [ 370.806283] kernel_init+0x26/0x230 [ 370.806799] ret_from_fork+0x1f/0x30 To fix the deadlock, move the async_schedule_dev outside device_lock, as we can see, in async_schedule_node_domain, the parameter of queue_work_node is system_unbound_wq, so it can accept concurrent operations. which will also not change the code logic, and will not lead to deadlock. |
| CVE-2022-50073 | In the Linux kernel, the following vulnerability has been resolved: net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null Fixes a NULL pointer derefence bug triggered from tap driver. When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null (in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb) virtio_net_hdr_to_skb calls dev_parse_header_protocol which needs skb->dev field to be valid. The line that trigers the bug is in dev_parse_header_protocol (dev is at offset 0x10 from skb and is stored in RAX register) if (!dev->header_ops || !dev->header_ops->parse_protocol) 22e1: mov 0x10(%rbx),%rax 22e5: mov 0x230(%rax),%rax Setting skb->dev before the call in tap.c fixes the issue. BUG: kernel NULL pointer dereference, address: 0000000000000230 RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap] Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48 RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010 RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300 RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8 R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6 FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0 Call Trace: tap_get_user+0x3f1/0x540 [tap] tap_sendmsg+0x56/0x362 [tap] ? get_tx_bufs+0xc2/0x1e0 [vhost_net] handle_tx_copy+0x114/0x670 [vhost_net] handle_tx+0xb0/0xe0 [vhost_net] handle_tx_kick+0x15/0x20 [vhost_net] vhost_worker+0x7b/0xc0 [vhost] ? vhost_vring_call_reset+0x40/0x40 [vhost] kthread+0xfa/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 |
| CVE-2022-50065 | In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix memory leak inside XPD_TX with mergeable When we call xdp_convert_buff_to_frame() to get xdpf, if it returns NULL, we should check if xdp_page was allocated by xdp_linearize_page(). If it is newly allocated, it should be freed here alone. Just like any other "goto err_xdp". |
| CVE-2022-50064 | In the Linux kernel, the following vulnerability has been resolved: virtio-blk: Avoid use-after-free on suspend/resume hctx->user_data is set to vq in virtblk_init_hctx(). However, vq is freed on suspend and reallocated on resume. So, hctx->user_data is invalid after resume, and it will cause use-after-free accessing which will result in the kernel crash something like below: [ 22.428391] Call Trace: [ 22.428899] <TASK> [ 22.429339] virtqueue_add_split+0x3eb/0x620 [ 22.430035] ? __blk_mq_alloc_requests+0x17f/0x2d0 [ 22.430789] ? kvm_clock_get_cycles+0x14/0x30 [ 22.431496] virtqueue_add_sgs+0xad/0xd0 [ 22.432108] virtblk_add_req+0xe8/0x150 [ 22.432692] virtio_queue_rqs+0xeb/0x210 [ 22.433330] blk_mq_flush_plug_list+0x1b8/0x280 [ 22.434059] __blk_flush_plug+0xe1/0x140 [ 22.434853] blk_finish_plug+0x20/0x40 [ 22.435512] read_pages+0x20a/0x2e0 [ 22.436063] ? folio_add_lru+0x62/0xa0 [ 22.436652] page_cache_ra_unbounded+0x112/0x160 [ 22.437365] filemap_get_pages+0xe1/0x5b0 [ 22.437964] ? context_to_sid+0x70/0x100 [ 22.438580] ? sidtab_context_to_sid+0x32/0x400 [ 22.439979] filemap_read+0xcd/0x3d0 [ 22.440917] xfs_file_buffered_read+0x4a/0xc0 [ 22.441984] xfs_file_read_iter+0x65/0xd0 [ 22.442970] __kernel_read+0x160/0x2e0 [ 22.443921] bprm_execve+0x21b/0x640 [ 22.444809] do_execveat_common.isra.0+0x1a8/0x220 [ 22.446008] __x64_sys_execve+0x2d/0x40 [ 22.446920] do_syscall_64+0x37/0x90 [ 22.447773] entry_SYSCALL_64_after_hwframe+0x63/0xcd This patch fixes this issue by getting vq from vblk, and removes virtblk_init_hctx(). |
| CVE-2022-50004 | In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: fix metadata dst->dev xmit null pointer dereference When we try to transmit an skb with metadata_dst attached (i.e. dst->dev == NULL) through xfrm interface we can hit a null pointer dereference[1] in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a loopback skb device when there's no policy which dereferences dst->dev unconditionally. Not having dst->dev can be interepreted as it not being a loopback device, so just add a check for a null dst_orig->dev. With this fix xfrm interface's Tx error counters go up as usual. [1] net-next calltrace captured via netconsole: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60 Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02 RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80 RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000 R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0 Call Trace: <TASK> xfrmi_xmit+0xde/0x460 ? tcf_bpf_act+0x13d/0x2a0 dev_hard_start_xmit+0x72/0x1e0 __dev_queue_xmit+0x251/0xd30 ip_finish_output2+0x140/0x550 ip_push_pending_frames+0x56/0x80 raw_sendmsg+0x663/0x10a0 ? try_charge_memcg+0x3fd/0x7a0 ? __mod_memcg_lruvec_state+0x93/0x110 ? sock_sendmsg+0x30/0x40 sock_sendmsg+0x30/0x40 __sys_sendto+0xeb/0x130 ? handle_mm_fault+0xae/0x280 ? do_user_addr_fault+0x1e7/0x680 ? kvm_read_and_reset_apf_flags+0x3b/0x50 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff35cac1366 Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366 RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003 RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001 </TASK> Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole] CR2: 00000000000000c0 |
| CVE-2022-49760 | In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix PTE marker handling in hugetlb_change_protection() Patch series "mm/hugetlb: uffd-wp fixes for hugetlb_change_protection()". Playing with virtio-mem and background snapshots (using uffd-wp) on hugetlb in QEMU, I managed to trigger a VM_BUG_ON(). Looking into the details, hugetlb_change_protection() seems to not handle uffd-wp correctly in all cases. Patch #1 fixes my test case. I don't have reproducers for patch #2, as it requires running into migration entries. I did not yet check in detail yet if !hugetlb code requires similar care. This patch (of 2): There are two problematic cases when stumbling over a PTE marker in hugetlb_change_protection(): (1) We protect an uffd-wp PTE marker a second time using uffd-wp: we will end up in the "!huge_pte_none(pte)" case and mess up the PTE marker. (2) We unprotect a uffd-wp PTE marker: we will similarly end up in the "!huge_pte_none(pte)" case even though we cleared the PTE, because the "pte" variable is stale. We'll mess up the PTE marker. For example, if we later stumble over such a "wrongly modified" PTE marker, we'll treat it like a present PTE that maps some garbage page. This can, for example, be triggered by mapping a memfd backed by huge pages, registering uffd-wp, uffd-wp'ing an unmapped page and (a) uffd-wp'ing it a second time; or (b) uffd-unprotecting it; or (c) unregistering uffd-wp. Then, ff we trigger fallocate(FALLOC_FL_PUNCH_HOLE) on that file range, we will run into a VM_BUG_ON: [ 195.039560] page:00000000ba1f2987 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0 [ 195.039565] flags: 0x7ffffc0001000(reserved|node=0|zone=0|lastcpupid=0x1fffff) [ 195.039568] raw: 0007ffffc0001000 ffffe742c0000008 ffffe742c0000008 0000000000000000 [ 195.039569] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 195.039569] page dumped because: VM_BUG_ON_PAGE(compound && !PageHead(page)) [ 195.039573] ------------[ cut here ]------------ [ 195.039574] kernel BUG at mm/rmap.c:1346! [ 195.039579] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 195.039581] CPU: 7 PID: 4777 Comm: qemu-system-x86 Not tainted 6.0.12-200.fc36.x86_64 #1 [ 195.039583] Hardware name: LENOVO 20WNS1F81N/20WNS1F81N, BIOS N35ET50W (1.50 ) 09/15/2022 [ 195.039584] RIP: 0010:page_remove_rmap+0x45b/0x550 [ 195.039588] Code: [...] [ 195.039589] RSP: 0018:ffffbc03c3633ba8 EFLAGS: 00010292 [ 195.039591] RAX: 0000000000000040 RBX: ffffe742c0000000 RCX: 0000000000000000 [ 195.039592] RDX: 0000000000000002 RSI: ffffffff8e7aac1a RDI: 00000000ffffffff [ 195.039592] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffbc03c3633a08 [ 195.039593] R10: 0000000000000003 R11: ffffffff8f146328 R12: ffff9b04c42754b0 [ 195.039594] R13: ffffffff8fcc6328 R14: ffffbc03c3633c80 R15: ffff9b0484ab9100 [ 195.039595] FS: 00007fc7aaf68640(0000) GS:ffff9b0bbf7c0000(0000) knlGS:0000000000000000 [ 195.039596] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 195.039597] CR2: 000055d402c49110 CR3: 0000000159392003 CR4: 0000000000772ee0 [ 195.039598] PKRU: 55555554 [ 195.039599] Call Trace: [ 195.039600] <TASK> [ 195.039602] __unmap_hugepage_range+0x33b/0x7d0 [ 195.039605] unmap_hugepage_range+0x55/0x70 [ 195.039608] hugetlb_vmdelete_list+0x77/0xa0 [ 195.039611] hugetlbfs_fallocate+0x410/0x550 [ 195.039612] ? _raw_spin_unlock_irqrestore+0x23/0x40 [ 195.039616] vfs_fallocate+0x12e/0x360 [ 195.039618] __x64_sys_fallocate+0x40/0x70 [ 195.039620] do_syscall_64+0x58/0x80 [ 195.039623] ? syscall_exit_to_user_mode+0x17/0x40 [ 195.039624] ? do_syscall_64+0x67/0x80 [ 195.039626] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 195.039628] RIP: 0033:0x7fc7b590651f [ 195.039653] Code: [...] [ 195.039654] RSP: 002b:00007fc7aaf66e70 EFLAGS: 00000293 ORIG_RAX: 000000000000011d [ 195.039655] RAX: ffffffffffffffda RBX: 0000558ef4b7f370 RCX: 00007fc7b590651f ---truncated--- |
| CVE-2022-49687 | In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix xdp_rxq_info bug after suspend/resume The following sequence currently causes a driver bug warning when using virtio_net: # ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) <resume> # ip link set eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up. |
| CVE-2022-49532 | In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes drm_cvt_mode may return NULL and we should check it. This bug is found by syzkaller: FAULT_INJECTION stacktrace: [ 168.567394] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 [ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567408] Call trace: [ 168.567414] dump_backtrace+0x0/0x310 [ 168.567418] show_stack+0x28/0x38 [ 168.567423] dump_stack+0xec/0x15c [ 168.567427] should_fail+0x3ac/0x3d0 [ 168.567437] __should_failslab+0xb8/0x120 [ 168.567441] should_failslab+0x28/0xc0 [ 168.567445] kmem_cache_alloc_trace+0x50/0x640 [ 168.567454] drm_mode_create+0x40/0x90 [ 168.567458] drm_cvt_mode+0x48/0xc78 [ 168.567477] virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu] [ 168.567485] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567492] drm_mode_getconnector+0x2e0/0xa70 [ 168.567496] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567514] drm_ioctl+0x558/0x6d0 [ 168.567522] do_vfs_ioctl+0x160/0xf30 [ 168.567525] ksys_ioctl+0x98/0xd8 [ 168.567530] __arm64_sys_ioctl+0x50/0xc8 [ 168.567536] el0_svc_common+0xc8/0x320 [ 168.567540] el0_svc_handler+0xf8/0x160 [ 168.567544] el0_svc+0x10/0x218 KASAN stacktrace: [ 168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425 [ 168.567566] [ 168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567575] Call trace: [ 168.567578] dump_backtrace+0x0/0x310 [ 168.567582] show_stack+0x28/0x38 [ 168.567586] dump_stack+0xec/0x15c [ 168.567591] kasan_report+0x244/0x2f0 [ 168.567594] __asan_load4+0x58/0xb0 [ 168.567607] virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567612] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567617] drm_mode_getconnector+0x2e0/0xa70 [ 168.567621] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567624] drm_ioctl+0x558/0x6d0 [ 168.567628] do_vfs_ioctl+0x160/0xf30 [ 168.567632] ksys_ioctl+0x98/0xd8 [ 168.567636] __arm64_sys_ioctl+0x50/0xc8 [ 168.567641] el0_svc_common+0xc8/0x320 [ 168.567645] el0_svc_handler+0xf8/0x160 [ 168.567649] el0_svc+0x10/0x218 |
| CVE-2022-49146 | In the Linux kernel, the following vulnerability has been resolved: virtio: use virtio_device_ready() in virtio_device_restore() After waking up a suspended VM, the kernel prints the following trace for virtio drivers which do not directly call virtio_device_ready() in the .restore: PM: suspend exit irq 22: nobody cared (try booting with the "irqpoll" option) Call Trace: <IRQ> dump_stack_lvl+0x38/0x49 dump_stack+0x10/0x12 __report_bad_irq+0x3a/0xaf note_interrupt.cold+0xb/0x60 handle_irq_event+0x71/0x80 handle_fasteoi_irq+0x95/0x1e0 __common_interrupt+0x6b/0x110 common_interrupt+0x63/0xe0 asm_common_interrupt+0x1e/0x40 ? __do_softirq+0x75/0x2f3 irq_exit_rcu+0x93/0xe0 sysvec_apic_timer_interrupt+0xac/0xd0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch_cpu_idle+0x12/0x20 default_idle_call+0x39/0xf0 do_idle+0x1b5/0x210 cpu_startup_entry+0x20/0x30 start_secondary+0xf3/0x100 secondary_startup_64_no_verify+0xc3/0xcb </TASK> handlers: [<000000008f9bac49>] vp_interrupt [<000000008f9bac49>] vp_interrupt Disabling IRQ #22 This happens because we don't invoke .enable_cbs callback in virtio_device_restore(). That callback is used by some transports (e.g. virtio-pci) to enable interrupts. Let's fix it, by calling virtio_device_ready() as we do in virtio_dev_probe(). This function calls .enable_cts callback and sets DRIVER_OK status bit. This fix also avoids setting DRIVER_OK twice for those drivers that call virtio_device_ready() in the .restore. |
| CVE-2022-49100 | In the Linux kernel, the following vulnerability has been resolved: virtio_console: eliminate anonymous module_init & module_exit Eliminate anonymous module_init() and module_exit(), which can lead to confusion or ambiguity when reading System.map, crashes/oops/bugs, or an initcall_debug log. Give each of these init and exit functions unique driver-specific names to eliminate the anonymous names. Example 1: (System.map) ffffffff832fc78c t init ffffffff832fc79e t init ffffffff832fc8f8 t init Example 2: (initcall_debug log) calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 15 usecs calling init+0x0/0x60 @ 1 initcall init+0x0/0x60 returned 0 after 2 usecs calling init+0x0/0x9a @ 1 initcall init+0x0/0x9a returned 0 after 74 usecs |
| CVE-2022-49049 | In the Linux kernel, the following vulnerability has been resolved: mm/secretmem: fix panic when growing a memfd_secret When one tries to grow an existing memfd_secret with ftruncate, one gets a panic [1]. For example, doing the following reliably induces the panic: fd = memfd_secret(); ftruncate(fd, 10); ptr = mmap(NULL, 10, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); strcpy(ptr, "123456789"); munmap(ptr, 10); ftruncate(fd, 20); The basic reason for this is, when we grow with ftruncate, we call down into simple_setattr, and then truncate_inode_pages_range, and eventually we try to zero part of the memory. The normal truncation code does this via the direct map (i.e., it calls page_address() and hands that to memset()). For memfd_secret though, we specifically don't map our pages via the direct map (i.e. we call set_direct_map_invalid_noflush() on every fault). So the address returned by page_address() isn't useful, and when we try to memset() with it we panic. This patch avoids the panic by implementing a custom setattr for memfd_secret, which detects resizes specifically (setting the size for the first time works just fine, since there are no existing pages to try to zero), and rejects them with EINVAL. One could argue growing should be supported, but I think that will require a significantly more lengthy change. So, I propose a minimal fix for the benefit of stable kernels, and then perhaps to extend memfd_secret to support growing in a separate patch. [1]: BUG: unable to handle page fault for address: ffffa0a889277028 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD afa01067 P4D afa01067 PUD 83f909067 PMD 83f8bf067 PTE 800ffffef6d88060 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 0 PID: 281 Comm: repro Not tainted 5.17.0-dbg-DEV #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:memset_erms+0x9/0x10 Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01 RSP: 0018:ffffb932c09afbf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffda63c4249dc0 RCX: 0000000000000fd8 RDX: 0000000000000fd8 RSI: 0000000000000000 RDI: ffffa0a889277028 RBP: ffffb932c09afc00 R08: 0000000000001000 R09: ffffa0a889277028 R10: 0000000000020023 R11: 0000000000000000 R12: ffffda63c4249dc0 R13: ffffa0a890d70d98 R14: 0000000000000028 R15: 0000000000000fd8 FS: 00007f7294899580(0000) GS:ffffa0af9bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa0a889277028 CR3: 0000000107ef6006 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? zero_user_segments+0x82/0x190 truncate_inode_partial_folio+0xd4/0x2a0 truncate_inode_pages_range+0x380/0x830 truncate_setsize+0x63/0x80 simple_setattr+0x37/0x60 notify_change+0x3d8/0x4d0 do_sys_ftruncate+0x162/0x1d0 __x64_sys_ftruncate+0x1c/0x20 do_syscall_64+0x44/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: xhci_pci xhci_hcd virtio_net net_failover failover virtio_blk virtio_balloon uhci_hcd ohci_pci ohci_hcd evdev ehci_pci ehci_hcd 9pnet_virtio 9p netfs 9pnet CR2: ffffa0a889277028 [lkp@intel.com: secretmem_iops can be static] [axelrasmussen@google.com: return EINVAL] |
| CVE-2022-48922 | In the Linux kernel, the following vulnerability has been resolved: riscv: fix oops caused by irqsoff latency tracer The trace_hardirqs_{on,off}() require the caller to setup frame pointer properly. This because these two functions use macro 'CALLER_ADDR1' (aka. __builtin_return_address(1)) to acquire caller info. If the $fp is used for other purpose, the code generated this macro (as below) could trigger memory access fault. 0xffffffff8011510e <+80>: ld a1,-16(s0) 0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here The oops message during booting if compiled with 'irqoff' tracer enabled: [ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 [ 0.041925][ T0] Oops [#1] [ 0.042063][ T0] Modules linked in: [ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29 [ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT) [ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2 [ 0.044601][ T0] ra : restore_all+0x12/0x6e [ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0 [ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020 [ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0 [ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100 [ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45 [ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50 [ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8 [ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000 [ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000 [ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368 [ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d [ 0.046402][ T0] [<ffffffff80003b94>] restore_all+0x12/0x6e This because the $fp(aka. $s0) register is not used as frame pointer in the assembly entry code. resume_kernel: REG_L s0, TASK_TI_PREEMPT_COUNT(tp) bnez s0, restore_all REG_L s0, TASK_TI_FLAGS(tp) andi s0, s0, _TIF_NEED_RESCHED beqz s0, restore_all call preempt_schedule_irq j restore_all To fix above issue, here we add one extra level wrapper for function trace_hardirqs_{on,off}() so they can be safely called by low level entry code. |
| CVE-2022-48899 | In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix GEM handle creation UAF Userspace can guess the handle value and try to race GEM object creation with handle close, resulting in a use-after-free if we dereference the object after dropping the handle's reference. For that reason, dropping the handle's reference must be done *after* we are done dereferencing the object. |
| CVE-2022-48865 | In the Linux kernel, the following vulnerability has been resolved: tipc: fix kernel panic when enabling bearer When enabling a bearer on a node, a kernel panic is observed: [ 4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc] ... [ 4.520030] Call Trace: [ 4.520689] <IRQ> [ 4.521236] tipc_link_build_proto_msg+0x375/0x750 [tipc] [ 4.522654] tipc_link_build_state_msg+0x48/0xc0 [tipc] [ 4.524034] __tipc_node_link_up+0xd7/0x290 [tipc] [ 4.525292] tipc_rcv+0x5da/0x730 [tipc] [ 4.526346] ? __netif_receive_skb_core+0xb7/0xfc0 [ 4.527601] tipc_l2_rcv_msg+0x5e/0x90 [tipc] [ 4.528737] __netif_receive_skb_list_core+0x20b/0x260 [ 4.530068] netif_receive_skb_list_internal+0x1bf/0x2e0 [ 4.531450] ? dev_gro_receive+0x4c2/0x680 [ 4.532512] napi_complete_done+0x6f/0x180 [ 4.533570] virtnet_poll+0x29c/0x42e [virtio_net] ... The node in question is receiving activate messages in another thread after changing bearer status to allow message sending/ receiving in current thread: thread 1 | thread 2 -------- | -------- | tipc_enable_bearer() | test_and_set_bit_lock() | tipc_bearer_xmit_skb() | | tipc_l2_rcv_msg() | tipc_rcv() | __tipc_node_link_up() | tipc_link_build_state_msg() | tipc_link_build_proto_msg() | tipc_mon_prep() | { | ... | // null-pointer dereference | u16 gen = mon->dom_gen; | ... | } // Not being executed yet | tipc_mon_create() | { | ... | // allocate | mon = kzalloc(); | ... | } | Monitoring pointer in thread 2 is dereferenced before monitoring data is allocated in thread 1. This causes kernel panic. This commit fixes it by allocating the monitoring data before enabling the bearer to receive messages. |
| CVE-2022-48864 | In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command request from the driver, presently there is no validation against the number of queue pairs to configure, or even if multiqueue had been negotiated or not is unverified. This may lead to kernel panic due to uninitialized resource for the queues were there any bogus request sent down by untrusted driver. Tie up the loose ends there. |
| CVE-2022-48853 | In the Linux kernel, the following vulnerability has been resolved: swiotlb: fix info leak with DMA_FROM_DEVICE The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce. |
| CVE-2022-34495 | rpmsg_probe in drivers/rpmsg/virtio_rpmsg_bus.c in the Linux kernel before 5.18.4 has a double free. |
| CVE-2022-34494 | rpmsg_virtio_add_ctrl_dev in drivers/rpmsg/virtio_rpmsg_bus.c in the Linux kernel before 5.18.4 has a double free. |
| CVE-2022-26878 | drivers/bluetooth/virtio_bt.c in the Linux kernel before 5.16.3 has a memory leak (socket buffers have memory allocated but not freed). |
| CVE-2022-26353 | A flaw was found in the virtio-net device of QEMU. This flaw was inadvertently introduced with the fix for CVE-2021-3748, which forgot to unmap the cached virtqueue elements on error, leading to memory leakage and other unexpected results. Affected QEMU version: 6.2.0. |
| CVE-2022-2308 | A flaw was found in vDPA with VDUSE backend. There are currently no checks in VDUSE kernel driver to ensure the size of the device config space is in line with the features advertised by the VDUSE userspace application. In case of a mismatch, Virtio drivers config read helpers do not initialize the memory indirectly passed to vduse_vdpa_get_config() returning uninitialized memory from the stack. This could cause undefined behavior or data leaks in Virtio drivers. |
| CVE-2022-0998 | An integer overflow flaw was found in the Linux kernel’s virtio device driver code in the way a user triggers the vhost_vdpa_config_validate function. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| CVE-2022-0358 | A flaw was found in the QEMU virtio-fs shared file system daemon (virtiofsd) implementation. This flaw is strictly related to CVE-2018-13405. A local guest user can create files in the directories shared by virtio-fs with unintended group ownership in a scenario where a directory is SGID to a certain group and is writable by a user who is not a member of the group. This could allow a malicious unprivileged user inside the guest to gain access to resources accessible to the root group, potentially escalating their privileges within the guest. A malicious local user in the host might also leverage this unexpected executable file created by the guest to escalate their privileges on the host system. |
| CVE-2021-47657 | In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free() If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it happened in the bug report by syzbot), virtio_gpu_array_put_free() could be called with objs equal to NULL. Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise return from the function. |
| CVE-2021-47613 | In the Linux kernel, the following vulnerability has been resolved: i2c: virtio: fix completion handling The driver currently assumes that the notify callback is only received when the device is done with all the queued buffers. However, this is not true, since the notify callback could be called without any of the queued buffers being completed (for example, with virtio-pci and shared interrupts) or with only some of the buffers being completed (since the driver makes them available to the device in multiple separate virtqueue_add_sgs() calls). This can lead to incorrect data on the I2C bus or memory corruption in the guest if the device operates on buffers which are have been freed by the driver. (The WARN_ON in the driver is also triggered.) BUG kmalloc-128 (Tainted: G W ): Poison overwritten First byte 0x0 instead of 0x6b Allocated in i2cdev_ioctl_rdwr+0x9d/0x1de age=243 cpu=0 pid=28 memdup_user+0x2e/0xbd i2cdev_ioctl_rdwr+0x9d/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Freed in i2cdev_ioctl_rdwr+0x1bb/0x1de age=68 cpu=0 pid=28 kfree+0x1bd/0x1cc i2cdev_ioctl_rdwr+0x1bb/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Fix this by calling virtio_get_buf() from the notify handler like other virtio drivers and by actually waiting for all the buffers to be completed. |
| CVE-2021-47595 | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_ets: don't remove idle classes from the round-robin list Shuang reported that the following script: 1) tc qdisc add dev ddd0 handle 10: parent 1: ets bands 8 strict 4 priomap 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 2) mausezahn ddd0 -A 10.10.10.1 -B 10.10.10.2 -c 0 -a own -b 00:c1:a0:c1:a0:00 -t udp & 3) tc qdisc change dev ddd0 handle 10: ets bands 4 strict 2 quanta 2500 2500 priomap 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 crashes systematically when line 2) is commented: list_del corruption, ffff8e028404bd30->next is LIST_POISON1 (dead000000000100) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 954 Comm: tc Not tainted 5.16.0-rc4+ #478 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000682f48 CR3: 00000001058be000 CR4: 0000000000350ef0 Call Trace: <TASK> ets_qdisc_change+0x58b/0xa70 [sch_ets] tc_modify_qdisc+0x323/0x880 rtnetlink_rcv_msg+0x169/0x4a0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1a5/0x280 netlink_sendmsg+0x257/0x4d0 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1f2/0x260 ___sys_sendmsg+0x7c/0xc0 __sys_sendmsg+0x57/0xa0 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7efdc8031338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffdf1ce9828 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000061b37a97 RCX: 00007efdc8031338 RDX: 0000000000000000 RSI: 00007ffdf1ce9890 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000078a940 R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000688880 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev pcspkr i2c_i801 virtio_balloon i2c_smbus lpc_ich ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel serio_raw ghash_clmulni_intel ahci libahci libata virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: sch_ets] ---[ end trace f35878d1912655c2 ]--- RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000 ---truncated--- |
| CVE-2021-47572 | In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix null pointer dereference when IPv6 is not enabled When we try to add an IPv6 nexthop and IPv6 is not enabled (!CONFIG_IPV6) we'll hit a NULL pointer dereference[1] in the error path of nh_create_ipv6() due to calling ipv6_stub->fib6_nh_release. The bug has been present since the beginning of IPv6 nexthop gateway support. Commit 1aefd3de7bc6 ("ipv6: Add fib6_nh_init and release to stubs") tells us that only fib6_nh_init has a dummy stub because fib6_nh_release should not be called if fib6_nh_init returns an error, but the commit below added a call to ipv6_stub->fib6_nh_release in its error path. To fix it return the dummy stub's -EAFNOSUPPORT error directly without calling ipv6_stub->fib6_nh_release in nh_create_ipv6()'s error path. [1] Output is a bit truncated, but it clearly shows the error. BUG: kernel NULL pointer dereference, address: 000000000000000000 #PF: supervisor instruction fetch in kernel modede #PF: error_code(0x0010) - not-present pagege PGD 0 P4D 0 Oops: 0010 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 638 Comm: ip Kdump: loaded Not tainted 5.16.0-rc1+ #446 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888109f5b8f0 EFLAGS: 00010286^Ac RAX: 0000000000000000 RBX: ffff888109f5ba28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8881008a2860 RBP: ffff888109f5b9d8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff888109f5b978 R11: ffff888109f5b948 R12: 00000000ffffff9f R13: ffff8881008a2a80 R14: ffff8881008a2860 R15: ffff8881008a2840 FS: 00007f98de70f100(0000) GS:ffff88822bf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000100efc000 CR4: 00000000000006e0 Call Trace: <TASK> nh_create_ipv6+0xed/0x10c rtm_new_nexthop+0x6d7/0x13f3 ? check_preemption_disabled+0x3d/0xf2 ? lock_is_held_type+0xbe/0xfd rtnetlink_rcv_msg+0x23f/0x26a ? check_preemption_disabled+0x3d/0xf2 ? rtnl_calcit.isra.0+0x147/0x147 netlink_rcv_skb+0x61/0xb2 netlink_unicast+0x100/0x187 netlink_sendmsg+0x37f/0x3a0 ? netlink_unicast+0x187/0x187 sock_sendmsg_nosec+0x67/0x9b ____sys_sendmsg+0x19d/0x1f9 ? copy_msghdr_from_user+0x4c/0x5e ? rcu_read_lock_any_held+0x2a/0x78 ___sys_sendmsg+0x6c/0x8c ? asm_sysvec_apic_timer_interrupt+0x12/0x20 ? lockdep_hardirqs_on+0xd9/0x102 ? sockfd_lookup_light+0x69/0x99 __sys_sendmsg+0x50/0x6e do_syscall_64+0xcb/0xf2 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f98dea28914 Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 e9 5d 0c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53 RSP: 002b:00007fff859f5e68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e2e RAX: ffffffffffffffda RBX: 00000000619cb810 RCX: 00007f98dea28914 RDX: 0000000000000000 RSI: 00007fff859f5ed0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000008 R10: fffffffffffffce6 R11: 0000000000000246 R12: 0000000000000001 R13: 000055c0097ae520 R14: 000055c0097957fd R15: 00007fff859f63a0 </TASK> Modules linked in: bridge stp llc bonding virtio_net |
| CVE-2021-47566 | In the Linux kernel, the following vulnerability has been resolved: proc/vmcore: fix clearing user buffer by properly using clear_user() To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via "cp": systemd[1]: Starting Kdump Vmcore Save Service... kdump[420]: Kdump is using the default log level(3). kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[465]: saving vmcore-dmesg.txt complete kdump[467]: saving vmcore BUG: unable to handle page fault for address: 00007f2374e01000 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86 Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81 RSP: 0018:ffffc9000073be08 EFLAGS: 00010212 RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000 RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008 RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50 R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000 R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8 FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0 Call Trace: read_vmcore+0x236/0x2c0 proc_reg_read+0x55/0xa0 vfs_read+0x95/0x190 ksys_read+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access Prevention (SMAP)", which is used to detect wrong access from the kernel to user buffers like this: SMAP triggers a permissions violation on wrong access. In the x86-64 variant of clear_user(), SMAP is properly handled via clac()+stac(). To fix, properly use clear_user() when we're dealing with a user buffer. |
| CVE-2021-47561 | In the Linux kernel, the following vulnerability has been resolved: i2c: virtio: disable timeout handling If a timeout is hit, it can result is incorrect data on the I2C bus and/or memory corruptions in the guest since the device can still be operating on the buffers it was given while the guest has freed them. Here is, for example, the start of a slub_debug splat which was triggered on the next transfer after one transfer was forced to timeout by setting a breakpoint in the backend (rust-vmm/vhost-device): BUG kmalloc-1k (Not tainted): Poison overwritten First byte 0x1 instead of 0x6b Allocated in virtio_i2c_xfer+0x65/0x35c age=350 cpu=0 pid=29 __kmalloc+0xc2/0x1c9 virtio_i2c_xfer+0x65/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Freed in virtio_i2c_xfer+0x32e/0x35c age=244 cpu=0 pid=29 kfree+0x1bd/0x1cc virtio_i2c_xfer+0x32e/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 There is no simple fix for this (the driver would have to always create bounce buffers and hold on to them until the device eventually returns the buffers), so just disable the timeout support for now. |
| CVE-2021-47557 | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_ets: don't peek at classes beyond 'nbands' when the number of DRR classes decreases, the round-robin active list can contain elements that have already been freed in ets_qdisc_change(). As a consequence, it's possible to see a NULL dereference crash, caused by the attempt to call cl->qdisc->ops->peek(cl->qdisc) when cl->qdisc is NULL: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 910 Comm: mausezahn Not tainted 5.16.0-rc1+ #475 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:ets_qdisc_dequeue+0x129/0x2c0 [sch_ets] Code: c5 01 41 39 ad e4 02 00 00 0f 87 18 ff ff ff 49 8b 85 c0 02 00 00 49 39 c4 0f 84 ba 00 00 00 49 8b ad c0 02 00 00 48 8b 7d 10 <48> 8b 47 18 48 8b 40 38 0f ae e8 ff d0 48 89 c3 48 85 c0 0f 84 9d RSP: 0000:ffffbb36c0b5fdd8 EFLAGS: 00010287 RAX: ffff956678efed30 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: ffffffff9b938dc9 RDI: 0000000000000000 RBP: ffff956678efed30 R08: e2f3207fe360129c R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff956678efeac0 R13: ffff956678efe800 R14: ffff956611545000 R15: ffff95667ac8f100 FS: 00007f2aa9120740(0000) GS:ffff95667b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000011070c000 CR4: 0000000000350ee0 Call Trace: <TASK> qdisc_peek_dequeued+0x29/0x70 [sch_ets] tbf_dequeue+0x22/0x260 [sch_tbf] __qdisc_run+0x7f/0x630 net_tx_action+0x290/0x4c0 __do_softirq+0xee/0x4f8 irq_exit_rcu+0xf4/0x130 sysvec_apic_timer_interrupt+0x52/0xc0 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0033:0x7f2aa7fc9ad4 Code: b9 ff ff 48 8b 54 24 18 48 83 c4 08 48 89 ee 48 89 df 5b 5d e9 ed fc ff ff 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa <53> 48 83 ec 10 48 8b 05 10 64 33 00 48 8b 00 48 85 c0 0f 85 84 00 RSP: 002b:00007ffe5d33fab8 EFLAGS: 00000202 RAX: 0000000000000002 RBX: 0000561f72c31460 RCX: 0000561f72c31720 RDX: 0000000000000002 RSI: 0000561f72c31722 RDI: 0000561f72c31720 RBP: 000000000000002a R08: 00007ffe5d33fa40 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 0000561f7187e380 R13: 0000000000000000 R14: 0000000000000000 R15: 0000561f72c31460 </TASK> Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt intel_rapl_msr iTCO_vendor_support intel_rapl_common joydev virtio_balloon lpc_ich i2c_i801 i2c_smbus pcspkr ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel ahci libahci ghash_clmulni_intel serio_raw libata virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000018 Ensuring that 'alist' was never zeroed [1] was not sufficient, we need to remove from the active list those elements that are no more SP nor DRR. [1] https://lore.kernel.org/netdev/60d274838bf09777f0371253416e8af71360bc08.1633609148.git.dcaratti@redhat.com/ v3: fix race between ets_qdisc_change() and ets_qdisc_dequeue() delisting DRR classes beyond 'nbands' in ets_qdisc_change() with the qdisc lock acquired, thanks to Cong Wang. v2: when a NULL qdisc is found in the DRR active list, try to dequeue skb from the next list item. |
| CVE-2021-47492 | In the Linux kernel, the following vulnerability has been resolved: mm, thp: bail out early in collapse_file for writeback page Currently collapse_file does not explicitly check PG_writeback, instead, page_has_private and try_to_release_page are used to filter writeback pages. This does not work for xfs with blocksize equal to or larger than pagesize, because in such case xfs has no page->private. This makes collapse_file bail out early for writeback page. Otherwise, xfs end_page_writeback will panic as follows. page:fffffe00201bcc80 refcount:0 mapcount:0 mapping:ffff0003f88c86a8 index:0x0 pfn:0x84ef32 aops:xfs_address_space_operations [xfs] ino:30000b7 dentry name:"libtest.so" flags: 0x57fffe0000008027(locked|referenced|uptodate|active|writeback) raw: 57fffe0000008027 ffff80001b48bc28 ffff80001b48bc28 ffff0003f88c86a8 raw: 0000000000000000 0000000000000000 00000000ffffffff ffff0000c3e9a000 page dumped because: VM_BUG_ON_PAGE(((unsigned int) page_ref_count(page) + 127u <= 127u)) page->mem_cgroup:ffff0000c3e9a000 ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:1212! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: BUG: Bad page state in process khugepaged pfn:84ef32 xfs(E) page:fffffe00201bcc80 refcount:0 mapcount:0 mapping:0 index:0x0 pfn:0x84ef32 libcrc32c(E) rfkill(E) aes_ce_blk(E) crypto_simd(E) ... CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Tainted: ... pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) Call trace: end_page_writeback+0x1c0/0x214 iomap_finish_page_writeback+0x13c/0x204 iomap_finish_ioend+0xe8/0x19c iomap_writepage_end_bio+0x38/0x50 bio_endio+0x168/0x1ec blk_update_request+0x278/0x3f0 blk_mq_end_request+0x34/0x15c virtblk_request_done+0x38/0x74 [virtio_blk] blk_done_softirq+0xc4/0x110 __do_softirq+0x128/0x38c __irq_exit_rcu+0x118/0x150 irq_exit+0x1c/0x30 __handle_domain_irq+0x8c/0xf0 gic_handle_irq+0x84/0x108 el1_irq+0xcc/0x180 arch_cpu_idle+0x18/0x40 default_idle_call+0x4c/0x1a0 cpuidle_idle_call+0x168/0x1e0 do_idle+0xb4/0x104 cpu_startup_entry+0x30/0x9c secondary_start_kernel+0x104/0x180 Code: d4210000 b0006161 910c8021 94013f4d (d4210000) ---[ end trace 4a88c6a074082f8c ]--- Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt |
| CVE-2021-47367 | In the Linux kernel, the following vulnerability has been resolved: virtio-net: fix pages leaking when building skb in big mode We try to use build_skb() if we had sufficient tailroom. But we forget to release the unused pages chained via private in big mode which will leak pages. Fixing this by release the pages after building the skb in big mode. |
| CVE-2021-47352 | In the Linux kernel, the following vulnerability has been resolved: virtio-net: Add validation for used length This adds validation for used length (might come from an untrusted device) to avoid data corruption or loss. |
| CVE-2021-47319 | In the Linux kernel, the following vulnerability has been resolved: virtio-blk: Fix memory leak among suspend/resume procedure The vblk->vqs should be freed before we call init_vqs() in virtblk_restore(). |
| CVE-2021-47222 | In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst refcnt when egressing The egress tunnel code uses dst_clone() and directly sets the result which is wrong because the entry might have 0 refcnt or be already deleted, causing number of problems. It also triggers the WARN_ON() in dst_hold()[1] when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and checking if a reference was actually taken before setting the dst. [1] dmesg WARN_ON log and following refcnt errors WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G W 5.13.0-rc3+ #360 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49 RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0 RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401 FS: 0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0 Call Trace: br_handle_vlan+0xbc/0xca [bridge] __br_forward+0x23/0x164 [bridge] deliver_clone+0x41/0x48 [bridge] br_handle_frame_finish+0x36f/0x3aa [bridge] ? skb_dst+0x2e/0x38 [bridge] ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge] ? br_handle_frame_finish+0x3aa/0x3aa [bridge] br_handle_frame+0x2c3/0x377 [bridge] ? __skb_pull+0x33/0x51 ? vlan_do_receive+0x4f/0x36a ? br_handle_frame_finish+0x3aa/0x3aa [bridge] __netif_receive_skb_core+0x539/0x7c6 ? __list_del_entry_valid+0x16e/0x1c2 __netif_receive_skb_list_core+0x6d/0xd6 netif_receive_skb_list_internal+0x1d9/0x1fa gro_normal_list+0x22/0x3e dev_gro_receive+0x55b/0x600 ? detach_buf_split+0x58/0x140 napi_gro_receive+0x94/0x12e virtnet_poll+0x15d/0x315 [virtio_net] __napi_poll+0x2c/0x1c9 net_rx_action+0xe6/0x1fb __do_softirq+0x115/0x2d8 run_ksoftirqd+0x18/0x20 smpboot_thread_fn+0x183/0x19c ? smpboot_unregister_percpu_thread+0x66/0x66 kthread+0x10a/0x10f ? kthread_mod_delayed_work+0xb6/0xb6 ret_from_fork+0x22/0x30 ---[ end trace 49f61b07f775fd2b ]--- dst_release: dst:00000000c02d677a refcnt:-1 dst_release underflow |
| CVE-2021-47103 | In the Linux kernel, the following vulnerability has been resolved: inet: fully convert sk->sk_rx_dst to RCU rules syzbot reported various issues around early demux, one being included in this changelog [1] sk->sk_rx_dst is using RCU protection without clearly documenting it. And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv() are not following standard RCU rules. [a] dst_release(dst); [b] sk->sk_rx_dst = NULL; They look wrong because a delete operation of RCU protected pointer is supposed to clear the pointer before the call_rcu()/synchronize_rcu() guarding actual memory freeing. In some cases indeed, dst could be freed before [b] is done. We could cheat by clearing sk_rx_dst before calling dst_release(), but this seems the right time to stick to standard RCU annotations and debugging facilities. [1] BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline] BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204 CPU: 0 PID: 9204 Comm: syz-executor.5 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 dst_check include/net/dst.h:470 [inline] tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 ip_rcv_finish_core.constprop.0+0x15de/0x1e80 net/ipv4/ip_input.c:340 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 common_interrupt+0x52/0xc0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:629 RIP: 0033:0x7f5e972bfd57 Code: 39 d1 73 14 0f 1f 80 00 00 00 00 48 8b 50 f8 48 83 e8 08 48 39 ca 77 f3 48 39 c3 73 3e 48 89 13 48 8b 50 f8 48 89 38 49 8b 0e <48> 8b 3e 48 83 c3 08 48 83 c6 08 eb bc 48 39 d1 72 9e 48 39 d0 73 RSP: 002b:00007fff8a413210 EFLAGS: 00000283 RAX: 00007f5e97108990 RBX: 00007f5e97108338 RCX: ffffffff81d3aa45 RDX: ffffffff81d3aa45 RSI: 00007f5e97108340 RDI: ffffffff81d3aa45 RBP: 00007f5e97107eb8 R08: 00007f5e97108d88 R09: 0000000093c2e8d9 R10: 0000000000000000 R11: 0000000000000000 R12: 00007f5e97107eb0 R13: 00007f5e97108338 R14: 00007f5e97107ea8 R15: 0000000000000019 </TASK> Allocated by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 ip_route_input_slow+0x1817/0x3a20 net/ipv4/route.c:234 ---truncated--- |
| CVE-2021-47024 | In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: free queued packets when closing socket As reported by syzbot [1], there is a memory leak while closing the socket. We partially solved this issue with commit ac03046ece2b ("vsock/virtio: free packets during the socket release"), but we forgot to drain the RX queue when the socket is definitely closed by the scheduled work. To avoid future issues, let's use the new virtio_transport_remove_sock() to drain the RX queue before removing the socket from the af_vsock lists calling vsock_remove_sock(). [1] https://syzkaller.appspot.com/bug?extid=24452624fc4c571eedd9 |
| CVE-2021-46957 | In the Linux kernel, the following vulnerability has been resolved: riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe The execution of sys_read end up hitting a BUG_ON() in __find_get_block after installing kprobe at sys_read, the BUG message like the following: [ 65.708663] ------------[ cut here ]------------ [ 65.709987] kernel BUG at fs/buffer.c:1251! [ 65.711283] Kernel BUG [#1] [ 65.712032] Modules linked in: [ 65.712925] CPU: 0 PID: 51 Comm: sh Not tainted 5.12.0-rc4 #1 [ 65.714407] Hardware name: riscv-virtio,qemu (DT) [ 65.715696] epc : __find_get_block+0x218/0x2c8 [ 65.716835] ra : __getblk_gfp+0x1c/0x4a [ 65.717831] epc : ffffffe00019f11e ra : ffffffe00019f56a sp : ffffffe002437930 [ 65.719553] gp : ffffffe000f06030 tp : ffffffe0015abc00 t0 : ffffffe00191e038 [ 65.721290] t1 : ffffffe00191e038 t2 : 000000000000000a s0 : ffffffe002437960 [ 65.723051] s1 : ffffffe00160ad00 a0 : ffffffe00160ad00 a1 : 000000000000012a [ 65.724772] a2 : 0000000000000400 a3 : 0000000000000008 a4 : 0000000000000040 [ 65.726545] a5 : 0000000000000000 a6 : ffffffe00191e000 a7 : 0000000000000000 [ 65.728308] s2 : 000000000000012a s3 : 0000000000000400 s4 : 0000000000000008 [ 65.730049] s5 : 000000000000006c s6 : ffffffe00240f800 s7 : ffffffe000f080a8 [ 65.731802] s8 : 0000000000000001 s9 : 000000000000012a s10: 0000000000000008 [ 65.733516] s11: 0000000000000008 t3 : 00000000000003ff t4 : 000000000000000f [ 65.734434] t5 : 00000000000003ff t6 : 0000000000040000 [ 65.734613] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 65.734901] Call Trace: [ 65.735076] [<ffffffe00019f11e>] __find_get_block+0x218/0x2c8 [ 65.735417] [<ffffffe00020017a>] __ext4_get_inode_loc+0xb2/0x2f6 [ 65.735618] [<ffffffe000201b6c>] ext4_get_inode_loc+0x3a/0x8a [ 65.735802] [<ffffffe000203380>] ext4_reserve_inode_write+0x2e/0x8c [ 65.735999] [<ffffffe00020357a>] __ext4_mark_inode_dirty+0x4c/0x18e [ 65.736208] [<ffffffe000206bb0>] ext4_dirty_inode+0x46/0x66 [ 65.736387] [<ffffffe000192914>] __mark_inode_dirty+0x12c/0x3da [ 65.736576] [<ffffffe000180dd2>] touch_atime+0x146/0x150 [ 65.736748] [<ffffffe00010d762>] filemap_read+0x234/0x246 [ 65.736920] [<ffffffe00010d834>] generic_file_read_iter+0xc0/0x114 [ 65.737114] [<ffffffe0001f5d7a>] ext4_file_read_iter+0x42/0xea [ 65.737310] [<ffffffe000163f2c>] new_sync_read+0xe2/0x15a [ 65.737483] [<ffffffe000165814>] vfs_read+0xca/0xf2 [ 65.737641] [<ffffffe000165bae>] ksys_read+0x5e/0xc8 [ 65.737816] [<ffffffe000165c26>] sys_read+0xe/0x16 [ 65.737973] [<ffffffe000003972>] ret_from_syscall+0x0/0x2 [ 65.738858] ---[ end trace fe93f985456c935d ]--- A simple reproducer looks like: echo 'p:myprobe sys_read fd=%a0 buf=%a1 count=%a2' > /sys/kernel/debug/tracing/kprobe_events echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable cat /sys/kernel/debug/tracing/trace Here's what happens to hit that BUG_ON(): 1) After installing kprobe at entry of sys_read, the first instruction is replaced by 'ebreak' instruction on riscv64 platform. 2) Once kernel reach the 'ebreak' instruction at the entry of sys_read, it trap into the riscv breakpoint handler, where it do something to setup for coming single-step of origin instruction, including backup the 'sstatus' in pt_regs, followed by disable interrupt during single stepping via clear 'SIE' bit of 'sstatus' in pt_regs. 3) Then kernel restore to the instruction slot contains two instructions, one is original instruction at entry of sys_read, the other is 'ebreak'. Here it trigger a 'Instruction page fault' exception (value at 'scause' is '0xc'), if PF is not filled into PageTabe for that slot yet. 4) Again kernel trap into page fault exception handler, where it choose different policy according to the state of running kprobe. Because afte 2) the state is KPROBE_HIT_SS, so kernel reset the current kp ---truncated--- |
| CVE-2021-46956 | In the Linux kernel, the following vulnerability has been resolved: virtiofs: fix memory leak in virtio_fs_probe() When accidentally passing twice the same tag to qemu, kmemleak ended up reporting a memory leak in virtiofs. Also, looking at the log I saw the following error (that's when I realised the duplicated tag): virtiofs: probe of virtio5 failed with error -17 Here's the kmemleak log for reference: unreferenced object 0xffff888103d47800 (size 1024): comm "systemd-udevd", pid 118, jiffies 4294893780 (age 18.340s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 80 90 02 a0 ff ff ff ff ................ backtrace: [<000000000ebb87c1>] virtio_fs_probe+0x171/0x7ae [virtiofs] [<00000000f8aca419>] virtio_dev_probe+0x15f/0x210 [<000000004d6baf3c>] really_probe+0xea/0x430 [<00000000a6ceeac8>] device_driver_attach+0xa8/0xb0 [<00000000196f47a7>] __driver_attach+0x98/0x140 [<000000000b20601d>] bus_for_each_dev+0x7b/0xc0 [<00000000399c7b7f>] bus_add_driver+0x11b/0x1f0 [<0000000032b09ba7>] driver_register+0x8f/0xe0 [<00000000cdd55998>] 0xffffffffa002c013 [<000000000ea196a2>] do_one_initcall+0x64/0x2e0 [<0000000008f727ce>] do_init_module+0x5c/0x260 [<000000003cdedab6>] __do_sys_finit_module+0xb5/0x120 [<00000000ad2f48c6>] do_syscall_64+0x33/0x40 [<00000000809526b5>] entry_SYSCALL_64_after_hwframe+0x44/0xae |
| CVE-2021-45464 | kvmtool through 39181fc allows an out-of-bounds write, related to virtio/balloon.c and virtio/pci.c. This allows a guest OS user to execute arbitrary code on the host machine. |
| CVE-2021-38160 | ** DISPUTED ** In drivers/char/virtio_console.c in the Linux kernel before 5.13.4, data corruption or loss can be triggered by an untrusted device that supplies a buf->len value exceeding the buffer size. NOTE: the vendor indicates that the cited data corruption is not a vulnerability in any existing use case; the length validation was added solely for robustness in the face of anomalous host OS behavior. |
| CVE-2021-3748 | A use-after-free vulnerability was found in the virtio-net device of QEMU. It could occur when the descriptor's address belongs to the non direct access region, due to num_buffers being set after the virtqueue elem has been unmapped. A malicious guest could use this flaw to crash QEMU, resulting in a denial of service condition, or potentially execute code on the host with the privileges of the QEMU process. |
| CVE-2021-36147 | An issue was discovered in ACRN before 2.5. It allows a devicemodel/hw/pci/virtio/virtio_net.c virtio_net_ping_rxq NULL pointer dereference for vq->used. |
| CVE-2021-36144 | The polling timer handler in ACRN before 2.5 has a use-after-free for a freed virtio device, related to devicemodel/hw/pci/virtio/*.c. |
| CVE-2021-36143 | ACRN before 2.5 has a hw/pci/virtio/virtio.c vq_endchains NULL Pointer Dereference. |
| CVE-2021-3546 | An out-of-bounds write vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. The flaw occurs while processing the 'VIRTIO_GPU_CMD_GET_CAPSET' command from the guest. It could allow a privileged guest user to crash the QEMU process on the host, resulting in a denial of service condition, or potential code execution with the privileges of the QEMU process. |
| CVE-2021-3545 | An information disclosure vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. The flaw exists in virgl_cmd_get_capset_info() in contrib/vhost-user-gpu/virgl.c and could occur due to the read of uninitialized memory. A malicious guest could exploit this issue to leak memory from the host. |
| CVE-2021-3544 | Several memory leaks were found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. They exist in contrib/vhost-user-gpu/vhost-user-gpu.c and contrib/vhost-user-gpu/virgl.c due to improper release of memory (i.e., free) after effective lifetime. |
| CVE-2021-34856 | This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop 16.1.3 (49160). An attacker must first obtain the ability to execute high-privileged code on the target guest system in order to exploit this vulnerability. The specific flaw exists within the virtio-gpu virtual device. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the hypervisor. Was ZDI-CAN-13581. |
| CVE-2021-32846 | HyperKit is a toolkit for embedding hypervisor capabilities in an application. In versions 0.20210107, function `pci_vtsock_proc_tx` in `virtio-sock` can lead to to uninitialized memory use. In this situation, there is a check for the return value to be less or equal to `VTSOCK_MAXSEGS`, but that check is not sufficient because the function can return `-1` if it finds an error it cannot recover from. Moreover, the negative return value will be used by `iovec_pull` in a while condition that can further lead to more corruption because the function is not designed to handle a negative `iov_len`. This issue may lead to a guest crashing the host causing a denial of service and, under certain circumstance, memory corruption. This issue is fixed in commit af5eba2360a7351c08dfd9767d9be863a50ebaba. |
| CVE-2021-29631 | In FreeBSD 13.0-STABLE before n246941-20f96f215562, 12.2-STABLE before r370400, 11.4-STABLE before r370399, 13.0-RELEASE before p4, 12.2-RELEASE before p10, and 11.4-RELEASE before p13, certain VirtIO-based device models in bhyve failed to handle errors when fetching I/O descriptors. A malicious guest may cause the device model to operate on uninitialized I/O vectors leading to memory corruption, crashing of the bhyve process, and possibly arbitrary code execution in the bhyve process. |
| CVE-2021-20263 | A flaw was found in the virtio-fs shared file system daemon (virtiofsd) of QEMU. The new 'xattrmap' option may cause the 'security.capability' xattr in the guest to not drop on file write, potentially leading to a modified, privileged executable in the guest. In rare circumstances, this flaw could be used by a malicious user to elevate their privileges within the guest. |
| CVE-2020-35517 | A flaw was found in qemu. A host privilege escalation issue was found in the virtio-fs shared file system daemon where a privileged guest user is able to create a device special file in the shared directory and use it to r/w access host devices. |
| CVE-2020-28346 | ACRN through 2.2 has a devicemodel/hw/pci/virtio/virtio.c NULL Pointer Dereference. |
| CVE-2020-14375 | A flaw was found in dpdk in versions before 18.11.10 and before 19.11.5. Virtio ring descriptors, and the data they describe are in a region of memory accessible by from both the virtual machine and the host. An attacker in a VM can change the contents of the memory after vhost_crypto has validated it. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability. |
| CVE-2020-10725 | A flaw was found in DPDK version 19.11 and above that allows a malicious guest to cause a segmentation fault of the vhost-user backend application running on the host, which could result in a loss of connectivity for the other guests running on that host. This is caused by a missing validity check of the descriptor address in the function `virtio_dev_rx_batch_packed()`. |
| CVE-2020-10717 | A potential DoS flaw was found in the virtio-fs shared file system daemon (virtiofsd) implementation of the QEMU version >= v5.0. Virtio-fs is meant to share a host file system directory with a guest via virtio-fs device. If the guest opens the maximum number of file descriptors under the shared directory, a denial of service may occur. This flaw allows a guest user/process to cause this denial of service on the host. |
| CVE-2019-6676 | On versions 15.0.0-15.0.1, 14.0.0-14.1.2.2, and 13.1.0-13.1.3.1, TMM may restart on BIG-IP Virtual Edition (VE) when using virtio direct descriptors and packets 2 KB or larger. |
| CVE-2017-9060 | Memory leak in the virtio_gpu_set_scanout function in hw/display/virtio-gpu.c in QEMU (aka Quick Emulator) allows local guest OS users to cause a denial of service (memory consumption) via a large number of "VIRTIO_GPU_CMD_SET_SCANOUT:" commands. |
| CVE-2017-8086 | Memory leak in the v9fs_list_xattr function in hw/9pfs/9p-xattr.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (memory consumption) via vectors involving the orig_value variable. |
| CVE-2017-8067 | drivers/char/virtio_console.c in the Linux kernel 4.9.x and 4.10.x before 4.10.12 interacts incorrectly with the CONFIG_VMAP_STACK option, which allows local users to cause a denial of service (system crash or memory corruption) or possibly have unspecified other impact by leveraging use of more than one virtual page for a DMA scatterlist. |
| CVE-2017-7377 | The (1) v9fs_create and (2) v9fs_lcreate functions in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allow local guest OS privileged users to cause a denial of service (file descriptor or memory consumption) via vectors related to an already in-use fid. |
| CVE-2017-6317 | Memory leak in the add_shader_program function in vrend_renderer.c in virglrenderer before 0.6.0 allows local guest OS users to cause a denial of service (host memory consumption) via vectors involving the sprog variable. |
| CVE-2017-6210 | The vrend_decode_reset function in vrend_decode.c in virglrenderer before 0.6.0 allows local guest OS users to cause a denial of service (NULL pointer dereference and QEMU process crash) by destroying context 0 (zero). |
| CVE-2017-6209 | Stack-based buffer overflow in the parse_identifier function in tgsi_text.c in the TGSI auxiliary module in the Gallium driver in virglrenderer before 0.6.0 allows local guest OS users to cause a denial of service (out-of-bounds array access and QEMU process crash) via vectors related to parsing properties. |
| CVE-2017-5994 | Heap-based buffer overflow in the vrend_create_vertex_elements_state function in vrend_renderer.c in virglrenderer before 0.6.0 allows local guest OS users to cause a denial of service (out-of-bounds array access and crash) via the num_elements parameter. |
| CVE-2017-5931 | Integer overflow in hw/virtio/virtio-crypto.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (QEMU process crash) or possibly execute arbitrary code on the host via a crafted virtio-crypto request, which triggers a heap-based buffer overflow. |
| CVE-2017-5857 | Memory leak in the virgl_cmd_resource_unref function in hw/display/virtio-gpu-3d.c in QEMU (aka Quick Emulator) allows local guest OS users to cause a denial of service (host memory consumption) via a large number of VIRTIO_GPU_CMD_RESOURCE_UNREF commands sent without detaching the backing storage beforehand. |
| CVE-2017-5578 | Memory leak in the virtio_gpu_resource_attach_backing function in hw/display/virtio-gpu.c in QEMU (aka Quick Emulator) allows local guest OS users to cause a denial of service (host memory consumption) via a large number of VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING commands. |
| CVE-2017-5552 | Memory leak in the virgl_resource_attach_backing function in hw/display/virtio-gpu-3d.c in QEMU (aka Quick Emulator) allows local guest OS users to cause a denial of service (host memory consumption) via a large number of VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING commands. |
| CVE-2017-17381 | The Virtio Vring implementation in QEMU allows local OS guest users to cause a denial of service (divide-by-zero error and QEMU process crash) by unsetting vring alignment while updating Virtio rings. |
| CVE-2017-10810 | Memory leak in the virtio_gpu_object_create function in drivers/gpu/drm/virtio/virtgpu_object.c in the Linux kernel through 4.11.8 allows attackers to cause a denial of service (memory consumption) by triggering object-initialization failures. |
| CVE-2016-9912 | Quick Emulator (Qemu) built with the Virtio GPU Device emulator support is vulnerable to a memory leakage issue. It could occur while destroying gpu resource object in 'virtio_gpu_resource_destroy'. A guest user/process could use this flaw to leak host memory bytes, resulting in DoS for a host. |
| CVE-2016-9908 | Quick Emulator (Qemu) built with the Virtio GPU Device emulator support is vulnerable to an information leakage issue. It could occur while processing 'VIRTIO_GPU_CMD_GET_CAPSET' command. A guest user/process could use this flaw to leak contents of the host memory bytes. |
| CVE-2016-9846 | QEMU (aka Quick Emulator) built with the Virtio GPU Device emulator support is vulnerable to a memory leakage issue. It could occur while updating the cursor data in update_cursor_data_virgl. A guest user/process could use this flaw to leak host memory bytes, resulting in DoS for a host. |
| CVE-2016-9845 | QEMU (aka Quick Emulator) built with the Virtio GPU Device emulator support is vulnerable to an information leakage issue. It could occur while processing 'VIRTIO_GPU_CMD_GET_CAPSET_INFO' command. A guest user/process could use this flaw to leak contents of the host memory bytes. |
| CVE-2016-8578 | The v9fs_iov_vunmarshal function in fsdev/9p-iov-marshal.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (NULL pointer dereference and QEMU process crash) by sending an empty string parameter to a 9P operation. |
| CVE-2016-8577 | Memory leak in the v9fs_read function in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (memory consumption) via vectors related to an I/O read operation. |
| CVE-2016-7994 | Memory leak in the virtio_gpu_resource_create_2d function in hw/display/virtio-gpu.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (memory consumption) via a large number of VIRTIO_GPU_CMD_RESOURCE_CREATE_2D commands. |
| CVE-2016-7422 | The virtqueue_map_desc function in hw/virtio/virtio.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (NULL pointer dereference and QEMU process crash) via a large I/O descriptor buffer length value. |
| CVE-2016-7116 | Directory traversal vulnerability in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local guest OS administrators to access host files outside the export path via a .. (dot dot) in an unspecified string. |
| CVE-2016-6490 | The virtqueue_map_desc function in hw/virtio/virtio.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via a zero length for the descriptor buffer. |
| CVE-2016-5403 | The virtqueue_pop function in hw/virtio/virtio.c in QEMU allows local guest OS administrators to cause a denial of service (memory consumption and QEMU process crash) by submitting requests without waiting for completion. |
| CVE-2016-5126 | Heap-based buffer overflow in the iscsi_aio_ioctl function in block/iscsi.c in QEMU allows local guest OS users to cause a denial of service (QEMU process crash) or possibly execute arbitrary code via a crafted iSCSI asynchronous I/O ioctl call. |
| CVE-2016-10214 | Memory leak in the virgl_resource_attach_backing function in virglrenderer before 0.6.0 allows local guest OS users to cause a denial of service (memory consumption) via a large number of VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING commands. |
| CVE-2016-10163 | Memory leak in the vrend_renderer_context_create_internal function in vrend_decode.c in virglrenderer before 0.6.0 allows local guest OS users to cause a denial of service (host memory consumption) by repeatedly creating a decode context. |
| CVE-2016-10029 | The virtio_gpu_set_scanout function in QEMU (aka Quick Emulator) built with Virtio GPU Device emulator support allows local guest OS users to cause a denial of service (out-of-bounds read and process crash) via a scanout id in a VIRTIO_GPU_CMD_SET_SCANOUT command larger than num_scanouts. |
| CVE-2016-10028 | The virgl_cmd_get_capset function in hw/display/virtio-gpu-3d.c in QEMU (aka Quick Emulator) built with Virtio GPU Device emulator support allows local guest OS users to cause a denial of service (out-of-bounds read and process crash) via a VIRTIO_GPU_CMD_GET_CAPSET command with a maximum capabilities size with a value of 0. |
| CVE-2015-7295 | hw/virtio/virtio.c in the Virtual Network Device (virtio-net) support in QEMU, when big or mergeable receive buffers are not supported, allows remote attackers to cause a denial of service (guest network consumption) via a flood of jumbo frames on the (1) tuntap or (2) macvtap interface. |
| CVE-2015-5745 | Buffer overflow in the send_control_msg function in hw/char/virtio-serial-bus.c in QEMU before 2.4.0 allows guest users to cause a denial of service (QEMU process crash) via a crafted virtio control message. |
| CVE-2015-5156 | The virtnet_probe function in drivers/net/virtio_net.c in the Linux kernel before 4.2 attempts to support a FRAGLIST feature without proper memory allocation, which allows guest OS users to cause a denial of service (buffer overflow and memory corruption) via a crafted sequence of fragmented packets. |
| CVE-2015-3215 | The NetKVM Windows Virtio driver allows remote attackers to cause a denial of service (guest crash) via a crafted length value in an IP packet, as demonstrated by a value that does not account for the size of the IP options. |
| CVE-2014-3471 | Use-after-free vulnerability in hw/pci/pcie.c in QEMU (aka Quick Emulator) allows local guest OS users to cause a denial of service (QEMU instance crash) via hotplug and hotunplug operations of Virtio block devices. |
| CVE-2014-0182 | Heap-based buffer overflow in the virtio_load function in hw/virtio/virtio.c in QEMU before 1.7.2 might allow remote attackers to execute arbitrary code via a crafted config length in a savevm image. |
| CVE-2014-0150 | Integer overflow in the virtio_net_handle_mac function in hw/net/virtio-net.c in QEMU 2.0 and earlier allows local guest users to execute arbitrary code via a MAC addresses table update request, which triggers a heap-based buffer overflow. |
| CVE-2013-6399 | Array index error in the virtio_load function in hw/virtio/virtio.c in QEMU before 1.7.2 allows remote attackers to execute arbitrary code via a crafted savevm image. |
| CVE-2013-4542 | The virtio_scsi_load_request function in hw/scsi/scsi-bus.c in QEMU before 1.7.2 might allow remote attackers to execute arbitrary code via a crafted savevm image, which triggers an out-of-bounds array access. |
| CVE-2013-4535 | The virtqueue_map_sg function in hw/virtio/virtio.c in QEMU before 1.7.2 allows remote attackers to execute arbitrary files via a crafted savevm image, related to virtio-block or virtio-serial read. |
| CVE-2013-4470 | The Linux kernel before 3.12, when UDP Fragmentation Offload (UFO) is enabled, does not properly initialize certain data structures, which allows local users to cause a denial of service (memory corruption and system crash) or possibly gain privileges via a crafted application that uses the UDP_CORK option in a setsockopt system call and sends both short and long packets, related to the ip_ufo_append_data function in net/ipv4/ip_output.c and the ip6_ufo_append_data function in net/ipv6/ip6_output.c. |
| CVE-2013-4377 | Use-after-free vulnerability in the virtio-pci implementation in Qemu 1.4.0 through 1.6.0 allows local users to cause a denial of service (daemon crash) by "hot-unplugging" a virtio device. |
| CVE-2013-4151 | The virtio_load function in virtio/virtio.c in QEMU 1.x before 1.7.2 allows remote attackers to execute arbitrary code via a crafted savevm image, which triggers an out-of-bounds write. |
| CVE-2013-4150 | The virtio_net_load function in hw/net/virtio-net.c in QEMU 1.5.0 through 1.7.x before 1.7.2 allows remote attackers to cause a denial of service or possibly execute arbitrary code via vectors in which the value of curr_queues is greater than max_queues, which triggers an out-of-bounds write. |
| CVE-2013-4149 | Buffer overflow in virtio_net_load function in net/virtio-net.c in QEMU 1.3.0 through 1.7.x before 1.7.2 might allow remote attackers to execute arbitrary code via a large MAC table. |
| CVE-2013-4148 | Integer signedness error in the virtio_net_load function in hw/net/virtio-net.c in QEMU 1.x before 1.7.2 allows remote attackers to execute arbitrary code via a crafted savevm image, which triggers a buffer overflow. |
| CVE-2013-2016 | A flaw was found in the way qemu v1.3.0 and later (virtio-rng) validates addresses when guest accesses the config space of a virtio device. If the virtio device has zero/small sized config space, such as virtio-rng, a privileged guest user could use this flaw to access the matching host's qemu address space and thus increase their privileges on the host. |
| CVE-2011-4127 | The Linux kernel before 3.2.2 does not properly restrict SG_IO ioctl calls, which allows local users to bypass intended restrictions on disk read and write operations by sending a SCSI command to (1) a partition block device or (2) an LVM volume. |
| CVE-2011-2512 | The virtio_queue_notify in qemu-kvm 0.14.0 and earlier does not properly validate the virtqueue number, which allows guest users to cause a denial of service (guest crash) and possibly execute arbitrary code via a negative number in the Queue Notify field of the Virtio Header, which bypasses a signed comparison. |
| CVE-2011-2212 | Buffer overflow in the virtio subsystem in qemu-kvm 0.14.0 and earlier allows privileged guest users to cause a denial of service (guest crash) or gain privileges via a crafted indirect descriptor related to "virtqueue in and out requests." |
| CVE-2011-1750 | Multiple heap-based buffer overflows in the virtio-blk driver (hw/virtio-blk.c) in qemu-kvm 0.14.0 allow local guest users to cause a denial of service (guest crash) and possibly gain privileges via a (1) write request to the virtio_blk_handle_write function or (2) read request to the virtio_blk_handle_read function that is not properly aligned. |
| CVE-2010-2653 | Race condition in the hvc_close function in drivers/char/hvc_console.c in the Linux kernel before 2.6.34 allows local users to cause a denial of service or possibly have unspecified other impact by closing a Hypervisor Virtual Console device, related to the hvc_open and hvc_remove functions. |
| CVE-2010-0741 | The virtio_net_bad_features function in hw/virtio-net.c in the virtio-net driver in the Linux kernel before 2.6.26, when used on a guest OS in conjunction with qemu-kvm 0.11.0 or KVM 83, allows remote attackers to cause a denial of service (guest OS crash, and an associated qemu-kvm process exit) by sending a large amount of network traffic to a TCP port on the guest OS, related to a virtio-net whitelist that includes an improper implementation of TCP Segment Offloading (TSO). |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
