|
|
Search Results
There are 56 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2025-1125 | When reading data from a hfs filesystem, grub's hfs filesystem module uses user-controlled parameters from the filesystem metadata to calculate the internal buffers size, however it misses to properly check for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculation to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result the hfsplus_open_compressed_real() function will write past of the internal buffer length. This flaw may be leveraged to corrupt grub's internal critical data and may result in arbitrary code execution by-passing secure boot protections. |
| CVE-2025-1118 | A flaw was found in grub2. Grub's dump command is not blocked when grub is in lockdown mode, which allows the user to read any memory information, and an attacker may leverage this in order to extract signatures, salts, and other sensitive information from the memory. |
| CVE-2025-0690 | The read command is used to read the keyboard input from the user, while reads it keeps the input length in a 32-bit integer value which is further used to reallocate the line buffer to accept the next character. During this process, with a line big enough it's possible to make this variable to overflow leading to a out-of-bounds write in the heap based buffer. This flaw may be leveraged to corrupt grub's internal critical data and secure boot bypass is not discarded as consequence. |
| CVE-2025-0689 | When reading data from disk, the grub's UDF filesystem module utilizes the user controlled data length metadata to allocate its internal buffers. In certain scenarios, while iterating through disk sectors, it assumes the read size from the disk is always smaller than the allocated buffer size which is not guaranteed. A crafted filesystem image may lead to a heap-based buffer overflow resulting in critical data to be corrupted, resulting in the risk of arbitrary code execution by-passing secure boot protections. |
| CVE-2025-0686 | A flaw was found in grub2. When performing a symlink lookup from a romfs filesystem, grub's romfs filesystem module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciously crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the grub_romfs_read_symlink() may cause out-of-bounds writes when the calling grub_disk_read() function. This issue may be leveraged to corrupt grub's internal critical data and can result in arbitrary code execution by-passing secure boot protections. |
| CVE-2025-0685 | A flaw was found in grub2. When reading data from a jfs filesystem, grub's jfs filesystem module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the grub_jfs_lookup_symlink() function will write past the internal buffer length during grub_jfs_read_file(). This issue can be leveraged to corrupt grub's internal critical data and may result in arbitrary code execution, by-passing secure boot protections. |
| CVE-2025-0684 | A flaw was found in grub2. When performing a symlink lookup from a reiserfs filesystem, grub's reiserfs fs module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the grub_reiserfs_read_symlink() will call grub_reiserfs_read_real() with a overflown length parameter, leading to a heap based out-of-bounds write during data reading. This flaw may be leveraged to corrupt grub's internal critical data and can result in arbitrary code execution, by-passing secure boot protections. |
| CVE-2025-0678 | A flaw was found in grub2. When reading data from a squash4 filesystem, grub's squash4 fs module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciously crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the direct_read() will perform a heap based out-of-bounds write during data reading. This flaw may be leveraged to corrupt grub's internal critical data and may result in arbitrary code execution, by-passing secure boot protections. |
| CVE-2025-0677 | A flaw was found in grub2. When performing a symlink lookup, the grub's UFS module checks the inode's data size to allocate the internal buffer to read the file content, however, it fails to check if the symlink data size has overflown. When this occurs, grub_malloc() may be called with a smaller value than needed. When further reading the data from the disk into the buffer, the grub_ufs_lookup_symlink() function will write past the end of the allocated size. An attack can leverage this by crafting a malicious filesystem, and as a result, it will corrupt data stored in the heap, allowing for arbitrary code execution used to by-pass secure boot mechanisms. |
| CVE-2025-0624 | A flaw was found in grub2. During the network boot process, when trying to search for the configuration file, grub copies data from a user controlled environment variable into an internal buffer using the grub_strcpy() function. During this step, it fails to consider the environment variable length when allocating the internal buffer, resulting in an out-of-bounds write. If correctly exploited, this issue may result in remote code execution through the same network segment grub is searching for the boot information, which can be used to by-pass secure boot protections. |
| CVE-2024-56738 | GNU GRUB (aka GRUB2) through 2.12 does not use a constant-time algorithm for grub_crypto_memcmp and thus allows side-channel attacks. |
| CVE-2024-56737 | GNU GRUB (aka GRUB2) through 2.12 has a heap-based buffer overflow in fs/hfs.c via crafted sblock data in an HFS filesystem. |
| CVE-2024-49504 | grub2 allowed attackers with access to the grub shell to access files on the encrypted disks. |
| CVE-2024-45783 | A flaw was found in grub2. When failing to mount an HFS+ grub, the hfsplus filesystem driver doesn't properly set an ERRNO value. This issue may lead to a NULL pointer access. |
| CVE-2024-45782 | A flaw was found in the HFS filesystem. When reading an HFS volume's name at grub_fs_mount(), the HFS filesystem driver performs a strcpy() using the user-provided volume name as input without properly validating the volume name's length. This issue may read to a heap-based out-of-bounds writer, impacting grub's sensitive data integrity and eventually leading to a secure boot protection bypass. |
| CVE-2024-45777 | A flaw was found in grub2. The calculation of the translation buffer when reading a language .mo file in grub_gettext_getstr_from_position() may overflow, leading to a Out-of-bound write. This issue can be leveraged by an attacker to overwrite grub2's sensitive heap data, eventually leading to the circumvention of secure boot protections. |
| CVE-2024-45776 | When reading the language .mo file in grub_mofile_open(), grub2 fails to verify an integer overflow when allocating its internal buffer. A crafted .mo file may lead the buffer size calculation to overflow, leading to out-of-bound reads and writes. This flaw allows an attacker to leak sensitive data or overwrite critical data, possibly circumventing secure boot protections. |
| CVE-2024-45775 | A flaw was found in grub2 where the grub_extcmd_dispatcher() function calls grub_arg_list_alloc() to allocate memory for the grub's argument list. However, it fails to check in case the memory allocation fails. Once the allocation fails, a NULL point will be processed by the parse_option() function, leading grub to crash or, in some rare scenarios, corrupt the IVT data. |
| CVE-2024-32741 | A vulnerability has been identified in SIMATIC CN 4100 (All versions < V3.0). The affected device contains hard coded password which is used for the privileged system user `root` and for the boot loader `GRUB` by default . An attacker who manages to crack the password hash gains root access to the device. |
| CVE-2024-26475 | An issue in radareorg radare2 v.0.9.7 through v.5.8.6 and fixed in v.5.8.8 allows a local attacker to cause a denial of service via the grub_sfs_read_extent function. |
| CVE-2024-23301 | Relax-and-Recover (aka ReaR) through 2.7 creates a world-readable initrd when using GRUB_RESCUE=y. This allows local attackers to gain access to system secrets otherwise only readable by root. |
| CVE-2023-4949 | An attacker with local access to a system (either through a disk or external drive) can present a modified XFS partition to grub-legacy in such a way to exploit a memory corruption in grub’s XFS file system implementation. |
| CVE-2023-4692 | An out-of-bounds write flaw was found in grub2's NTFS filesystem driver. This issue may allow an attacker to present a specially crafted NTFS filesystem image, leading to grub's heap metadata corruption. In some circumstances, the attack may also corrupt the UEFI firmware heap metadata. As a result, arbitrary code execution and secure boot protection bypass may be achieved. |
| CVE-2023-43636 | In EVE OS, the “measured boot” mechanism prevents a compromised device from accessing the encrypted data located in the vault. As per the “measured boot” design, the PCR values calculated at different stages of the boot process will change if any of their respective parts are changed. This includes, among other things, the configuration of the bios, grub, the kernel cmdline, initrd, and more. However, this mechanism does not validate the entire rootfs, so an attacker can edit the filesystem and gain control over the system. As the default filesystem used by EVE OS is squashfs, this is somewhat harder than an ext4, which is easily changeable. This will not stop an attacker, as an attacker can repackage the squashfs with their changes in it and replace the partition altogether. This can also be done directly on the device, as the “003-storage-init” container contains the “mksquashfs” and “unsquashfs” binaries (with the corresponding libs). An attacker can gain full control over the device without changing the PCR values, thus not triggering the “measured boot” mechanism, and having full access to the vault. Note: This issue was partially fixed in these commits (after disclosure to Zededa), where the config partition measurement was added to PCR13: • aa3501d6c57206ced222c33aea15a9169d629141 • 5fef4d92e75838cc78010edaed5247dfbdae1889. This issue was made viable in version 9.0.0 when the calculation was moved to PCR14 but it was not included in the measured boot. |
| CVE-2023-4001 | An authentication bypass flaw was found in GRUB due to the way that GRUB uses the UUID of a device to search for the configuration file that contains the password hash for the GRUB password protection feature. An attacker capable of attaching an external drive such as a USB stick containing a file system with a duplicate UUID (the same as in the "/boot/" file system) can bypass the GRUB password protection feature on UEFI systems, which enumerate removable drives before non-removable ones. This issue was introduced in a downstream patch in Red Hat's version of grub2 and does not affect the upstream package. |
| CVE-2023-34325 | [This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] libfsimage contains parsing code for several filesystems, most of them based on grub-legacy code. libfsimage is used by pygrub to inspect guest disks. Pygrub runs as the same user as the toolstack (root in a priviledged domain). At least one issue has been reported to the Xen Security Team that allows an attacker to trigger a stack buffer overflow in libfsimage. After further analisys the Xen Security Team is no longer confident in the suitability of libfsimage when run against guest controlled input with super user priviledges. In order to not affect current deployments that rely on pygrub patches are provided in the resolution section of the advisory that allow running pygrub in deprivileged mode. CVE-2023-4949 refers to the original issue in the upstream grub project ("An attacker with local access to a system (either through a disk or external drive) can present a modified XFS partition to grub-legacy in such a way to exploit a memory corruption in grub’s XFS file system implementation.") CVE-2023-34325 refers specifically to the vulnerabilities in Xen's copy of libfsimage, which is decended from a very old version of grub. |
| CVE-2023-20064 | A vulnerability in the GRand Unified Bootloader (GRUB) for Cisco IOS XR Software could allow an unauthenticated attacker with physical access to the device to view sensitive files on the console using the GRUB bootloader command line. This vulnerability is due to the inclusion of unnecessary commands within the GRUB environment that allow sensitive files to be viewed. An attacker could exploit this vulnerability by being connected to the console port of the Cisco IOS XR device when the device is power-cycled. A successful exploit could allow the attacker to view sensitive files that could be used to conduct additional attacks against the device. |
| CVE-2022-3675 | Fedora CoreOS supports setting a GRUB bootloader password using a Butane config. When this feature is enabled, GRUB requires a password to access the GRUB command-line, modify kernel command-line arguments, or boot non-default OSTree deployments. Recent Fedora CoreOS releases have a misconfiguration which allows booting non-default OSTree deployments without entering a password. This allows someone with access to the GRUB menu to boot into an older version of Fedora CoreOS, reverting any security fixes that have recently been applied to the machine. A password is still required to modify kernel command-line arguments and to access the GRUB command line. |
| CVE-2022-28736 | There's a use-after-free vulnerability in grub_cmd_chainloader() function; The chainloader command is used to boot up operating systems that doesn't support multiboot and do not have direct support from GRUB2. When executing chainloader more than once a use-after-free vulnerability is triggered. If an attacker can control the GRUB2's memory allocation pattern sensitive data may be exposed and arbitrary code execution can be achieved. |
| CVE-2022-28733 | Integer underflow in grub_net_recv_ip4_packets; A malicious crafted IP packet can lead to an integer underflow in grub_net_recv_ip4_packets() function on rsm->total_len value. Under certain circumstances the total_len value may end up wrapping around to a small integer number which will be used in memory allocation. If the attack succeeds in such way, subsequent operations can write past the end of the buffer. |
| CVE-2022-2601 | A buffer overflow was found in grub_font_construct_glyph(). A malicious crafted pf2 font can lead to an overflow when calculating the max_glyph_size value, allocating a smaller than needed buffer for the glyph, this further leads to a buffer overflow and a heap based out-of-bounds write. An attacker may use this vulnerability to circumvent the secure boot mechanism. |
| CVE-2022-1665 | A set of pre-production kernel packages of Red Hat Enterprise Linux for IBM Power architecture can be booted by the grub in Secure Boot mode even though it shouldn't. These kernel builds don't have the secure boot lockdown patches applied to it and can bypass the secure boot validations, allowing the attacker to load another non-trusted code. |
| CVE-2021-46705 | A Insecure Temporary File vulnerability in grub-once of grub2 in SUSE Linux Enterprise Server 15 SP4, openSUSE Factory allows local attackers to truncate arbitrary files. This issue affects: SUSE Linux Enterprise Server 15 SP4 grub2 versions prior to 2.06-150400.7.1. SUSE openSUSE Factory grub2 versions prior to 2.06-18.1. |
| CVE-2021-3981 | A flaw in grub2 was found where its configuration file, known as grub.cfg, is being created with the wrong permission set allowing non privileged users to read its content. This represents a low severity confidentiality issue, as those users can eventually read any encrypted passwords present in grub.cfg. This flaw affects grub2 2.06 and previous versions. This issue has been fixed in grub upstream but no version with the fix is currently released. |
| CVE-2021-3697 | A crafted JPEG image may lead the JPEG reader to underflow its data pointer, allowing user-controlled data to be written in heap. To a successful to be performed the attacker needs to perform some triage over the heap layout and craft an image with a malicious format and payload. This vulnerability can lead to data corruption and eventual code execution or secure boot circumvention. This flaw affects grub2 versions prior grub-2.12. |
| CVE-2021-3696 | A heap out-of-bounds write may heppen during the handling of Huffman tables in the PNG reader. This may lead to data corruption in the heap space. Confidentiality, Integrity and Availablity impact may be considered Low as it's very complex to an attacker control the encoding and positioning of corrupted Huffman entries to achieve results such as arbitrary code execution and/or secure boot circumvention. This flaw affects grub2 versions prior grub-2.12. |
| CVE-2021-3695 | A crafted 16-bit grayscale PNG image may lead to a out-of-bounds write in the heap area. An attacker may take advantage of that to cause heap data corruption or eventually arbitrary code execution and circumvent secure boot protections. This issue has a high complexity to be exploited as an attacker needs to perform some triage over the heap layout to achieve signifcant results, also the values written into the memory are repeated three times in a row making difficult to produce valid payloads. This flaw affects grub2 versions prior grub-2.12. |
| CVE-2021-3418 | If certificates that signed grub are installed into db, grub can be booted directly. It will then boot any kernel without signature validation. The booted kernel will think it was booted in secureboot mode and will implement lockdown, yet it could have been tampered. This flaw is a reintroduction of CVE-2020-15705 and only affects grub2 versions prior to 2.06 and upstream and distributions using the shim_lock mechanism. |
| CVE-2020-27779 | A flaw was found in grub2 in versions prior to 2.06. The cutmem command does not honor secure boot locking allowing an privileged attacker to remove address ranges from memory creating an opportunity to circumvent SecureBoot protections after proper triage about grub's memory layout. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability. |
| CVE-2020-15707 | Integer overflows were discovered in the functions grub_cmd_initrd and grub_initrd_init in the efilinux component of GRUB2, as shipped in Debian, Red Hat, and Ubuntu (the functionality is not included in GRUB2 upstream), leading to a heap-based buffer overflow. These could be triggered by an extremely large number of arguments to the initrd command on 32-bit architectures, or a crafted filesystem with very large files on any architecture. An attacker could use this to execute arbitrary code and bypass UEFI Secure Boot restrictions. This issue affects GRUB2 version 2.04 and prior versions. |
| CVE-2020-15706 | GRUB2 contains a race condition in grub_script_function_create() leading to a use-after-free vulnerability which can be triggered by redefining a function whilst the same function is already executing, leading to arbitrary code execution and secure boot restriction bypass. This issue affects GRUB2 version 2.04 and prior versions. |
| CVE-2020-15705 | GRUB2 fails to validate kernel signature when booted directly without shim, allowing secure boot to be bypassed. This only affects systems where the kernel signing certificate has been imported directly into the secure boot database and the GRUB image is booted directly without the use of shim. This issue affects GRUB2 version 2.04 and prior versions. |
| CVE-2020-14308 | In grub2 versions before 2.06 the grub memory allocator doesn't check for possible arithmetic overflows on the requested allocation size. This leads the function to return invalid memory allocations which can be further used to cause possible integrity, confidentiality and availability impacts during the boot process. |
| CVE-2020-10713 | A flaw was found in grub2, prior to version 2.06. An attacker may use the GRUB 2 flaw to hijack and tamper the GRUB verification process. This flaw also allows the bypass of Secure Boot protections. In order to load an untrusted or modified kernel, an attacker would first need to establish access to the system such as gaining physical access, obtain the ability to alter a pxe-boot network, or have remote access to a networked system with root access. With this access, an attacker could then craft a string to cause a buffer overflow by injecting a malicious payload that leads to arbitrary code execution within GRUB. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability. |
| CVE-2020-10565 | grub2-bhyve, as used in FreeBSD bhyve before revision 525916 2020-02-12, does not validate the address provided as part of a memrw command (read_* or write_*) by a guest through a grub2.cfg file. This allows an untrusted guest to perform arbitrary read or write operations in the context of the grub-bhyve process, resulting in code execution as root on the host OS. |
| CVE-2017-9949 | The grub_memmove function in shlr/grub/kern/misc.c in radare2 1.5.0 allows remote attackers to cause a denial of service (stack-based buffer underflow and application crash) or possibly have unspecified other impact via a crafted binary file, possibly related to a buffer underflow in fs/ext2.c in GNU GRUB 2.02. |
| CVE-2017-9763 | The grub_ext2_read_block function in fs/ext2.c in GNU GRUB before 2013-11-12, as used in shlr/grub/fs/ext2.c in radare2 1.5.0, allows remote attackers to cause a denial of service (excessive stack use and application crash) via a crafted binary file, related to use of a variable-size stack array. |
| CVE-2017-7622 | dde-daemon, the daemon process of DDE (Deepin Desktop Environment) 15.0 through 15.3, runs with root privileges and hardly does anything to identify the user who calls the function through D-Bus. Anybody can change the grub config, even to append some arguments to make a backdoor or privilege escalation, by calling DoWriteGrubSettings() provided by dde-daemon. |
| CVE-2017-10929 | The grub_memmove function in shlr/grub/kern/misc.c in radare2 1.5.0 allows remote attackers to cause a denial of service (heap-based buffer overflow and application crash) or possibly have unspecified other impact via a crafted binary file, possibly related to a read overflow in the grub_disk_read_small_real function in kern/disk.c in GNU GRUB 2.02. |
| CVE-2016-0235 | IBM Security Guardium Database Activity Monitor 10 allows local users to have unspecified impact by leveraging administrator access to a hardcoded password, related to use on GRUB systems. IBM X-Force ID: 110326. |
| CVE-2015-8370 | Multiple integer underflows in Grub2 1.98 through 2.02 allow physically proximate attackers to bypass authentication, obtain sensitive information, or cause a denial of service (disk corruption) via backspace characters in the (1) grub_username_get function in grub-core/normal/auth.c or the (2) grub_password_get function in lib/crypto.c, which trigger an "Off-by-two" or "Out of bounds overwrite" memory error. |
| CVE-2014-0246 | SOSreport stores the md5 hash of the GRUB bootloader password in an archive, which allows local users to obtain sensitive information by reading the archive. |
| CVE-2013-4577 | A certain Debian patch for GNU GRUB uses world-readable permissions for grub.cfg, which allows local users to obtain password hashes, as demonstrated by reading the password_pbkdf2 directive in the file. |
| CVE-2012-2314 | The bootloader configuration module (pyanaconda/bootloader.py) in Anaconda uses 755 permissions for /etc/grub.d, which allows local users to obtain password hashes and conduct brute force password guessing attacks. |
| CVE-2009-4128 | GNU GRand Unified Bootloader (GRUB) 2 1.97 only compares the submitted portion of a password with the actual password, which makes it easier for physically proximate attackers to conduct brute force attacks and bypass authentication by submitting a password whose length is 1. |
| CVE-2008-3896 | Grub Legacy 0.97 and earlier stores pre-boot authentication passwords in the BIOS Keyboard buffer and does not clear this buffer before and after use, which allows local users to obtain sensitive information by reading the physical memory locations associated with this buffer. |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
