Search Results
There are 2500 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2024-3274 | ** UNSUPPORTED WHEN ASSIGNED ** A vulnerability has been found in D-Link DNS-320L, DNS-320LW and DNS-327L up to 20240403 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/info.cgi of the component HTTP GET Request Handler. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-259285 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced. |
| CVE-2024-3273 | ** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. Affected is an unknown function of the file /cgi-bin/nas_sharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument system leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-259284. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced. |
| CVE-2024-3272 | ** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as very critical, has been found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. This issue affects some unknown processing of the file /cgi-bin/nas_sharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument user with the input messagebus leads to hard-coded credentials. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-259283. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced. |
| CVE-2024-31815 | In TOTOLINK EX200 V4.0.3c.7314_B20191204, an attacker can obtain the configuration file without authorization through /cgi-bin/ExportSettings.sh |
| CVE-2024-29244 | Shenzhen Libituo Technology Co., Ltd LBT-T300-mini v1.2.9 was discovered to contain a buffer overflow via the pin_code_3g parameter at /apply.cgi. |
| CVE-2024-29243 | Shenzhen Libituo Technology Co., Ltd LBT-T300-mini v1.2.9 was discovered to contain a buffer overflow via the vpn_client_ip parameter at /apply.cgi. |
| CVE-2024-28447 | Shenzhen Libituo Technology Co., Ltd LBT-T300-mini1 v1.2.9 was discovered to contain a buffer overflow via lan_ipaddr parameters at /apply.cgi. |
| CVE-2024-28446 | Shenzhen Libituo Technology Co., Ltd LBT-T300-mini1 v1.2.9 was discovered to contain a buffer overflow via lan_netmask parameter at /apply.cgi. |
| CVE-2024-28354 | There is a command injection vulnerability in the TRENDnet TEW-827DRU router with firmware version 2.10B01. An attacker can inject commands into the post request parameters usapps.@smb[%d].username in the apply.cgi interface, thereby gaining root shell privileges. |
| CVE-2024-28353 | There is a command injection vulnerability in the TRENDnet TEW-827DRU router with firmware version 2.10B01. An attacker can inject commands into the post request parameters usapps.config.smb_admin_name in the apply.cgi interface, thereby gaining root shell privileges. |
| CVE-2024-27684 | A Cross-site scripting (XSS) vulnerability in dlapn.cgi, dldongle.cgi, dlcfg.cgi, fwup.cgi and seama.cgi in D-Link GORTAC750_A1_FW_v101b03 allows remote attackers to inject arbitrary web script or HTML via the url parameter. |
| CVE-2024-27575 | INOTEC Sicherheitstechnik WebServer CPS220/64 3.3.19 allows a remote attacker to read arbitrary files via absolute path traversal, such as with the /cgi-bin/display?file=/etc/passwd URI. |
| CVE-2024-26848 | In the Linux kernel, the following vulnerability has been resolved: afs: Fix endless loop in directory parsing If a directory has a block with only ".__afsXXXX" files in it (from uncompleted silly-rename), these .__afsXXXX files are skipped but without advancing the file position in the dir_context. This leads to afs_dir_iterate() repeating the block again and again. Fix this by making the code that skips the .__afsXXXX file also manually advance the file position. The symptoms are a soft lookup: watchdog: BUG: soft lockup - CPU#3 stuck for 52s! [check:5737] ... RIP: 0010:afs_dir_iterate_block+0x39/0x1fd ... ? watchdog_timer_fn+0x1a6/0x213 ... ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? afs_dir_iterate_block+0x39/0x1fd afs_dir_iterate+0x10a/0x148 afs_readdir+0x30/0x4a iterate_dir+0x93/0xd3 __do_sys_getdents64+0x6b/0xd4 This is almost certainly the actual fix for: https://bugzilla.kernel.org/show_bug.cgi?id=218496 |
| CVE-2024-26548 | An issue in vivotek Network Camera v.FD8166A-VVTK-0204j allows a remote attacker to execute arbitrary code via a crafted payload to the upload_file.cgi component. |
| CVE-2024-25851 | Netis WF2780 v2.1.40144 was discovered to contain a command injection vulnerability via the config_sequence parameter in other_para of cgitest.cgi. |
| CVE-2024-24215 | An issue in the component /cgi-bin/GetJsonValue.cgi of Cellinx NVT Web Server 5.0.0.014 allows attackers to leak configuration information via a crafted POST request. |
| CVE-2024-2415 | Command injection vulnerability in Movistar 4G router affecting version ES_WLD71-T1_v2.0.201820. This vulnerability allows an authenticated user to execute commands inside the router by making a POST request to the URL '/cgi-bin/gui.cgi'. |
| CVE-2024-23624 | A command injection vulnerability exists in the gena.cgi module of D-Link DAP-1650 devices. An unauthenticated attacker can exploit this vulnerability to gain command execution on the device as root. |
| CVE-2024-2353 | A vulnerability, which was classified as critical, has been found in Totolink X6000R 9.4.0cu.852_20230719. This issue affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi of the component shttpd. The manipulation of the argument ip leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-256313 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-22550 | An arbitrary file upload vulnerability in the component /alsdemo/ss/mediam.cgi of ShopSite v14.0 allows attackers to execute arbitrary code via uploading a crafted SVG file. |
| CVE-2024-22113 | Open redirect vulnerability in Access analysis CGI An-Analyzer released in 2023 December 31 and earlier allows a remote unauthenticated attacker to redirect users to arbitrary websites and conduct phishing attacks via a specially crafted URL. |
| CVE-2024-21846 | An unauthenticated attacker can reset the board and stop transmitter operations by sending a specially-crafted GET request to the command.cgi gateway, resulting in a denial-of-service scenario. |
| CVE-2024-1783 | A vulnerability classified as critical has been found in Totolink LR1200GB 9.1.0u.6619_B20230130/9.3.5u.6698_B20230810. Affected is the function loginAuth of the file /cgi-bin/cstecgi.cgi of the component Web Interface. The manipulation of the argument http_host leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-254574 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-1781 | A vulnerability was found in Totolink X6000R AX3000 9.4.0cu.852_20230719. It has been rated as critical. This issue affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component shttpd. The manipulation leads to command injection. The exploit has been disclosed to the public and may be used. The identifier VDB-254573 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-1004 | A vulnerability, which was classified as critical, was found in Totolink N200RE 9.3.5u.6139_B20201216. This affects the function loginAuth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument http_host leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-252273 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-1003 | A vulnerability, which was classified as critical, has been found in Totolink N200RE 9.3.5u.6139_B20201216. Affected by this issue is the function setLanguageCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument lang leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-252272. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-1002 | A vulnerability classified as critical was found in Totolink N200RE 9.3.5u.6139_B20201216. Affected by this vulnerability is the function setIpPortFilterRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ePort leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252271. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-1001 | A vulnerability classified as critical has been found in Totolink N200RE 9.3.5u.6139_B20201216. Affected is the function main of the file /cgi-bin/cstecgi.cgi. The manipulation leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-252270 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-1000 | A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216. It has been rated as critical. This issue affects the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument command leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-252269 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0999 | A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216. It has been declared as critical. This vulnerability affects the function setParentalRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument eTime leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-252268. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0998 | A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216. It has been classified as critical. This affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252267. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0997 | A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216 and classified as critical. Affected by this issue is the function setOpModeCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument pppoeUser leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-252266 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0944 | A vulnerability was found in Totolink T8 4.1.5cu.833_20220905. It has been rated as problematic. Affected by this issue is some unknown functionality of the file /cgi-bin/cstecgi.cgi. The manipulation leads to session expiration. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-252188. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0943 | A vulnerability was found in Totolink N350RT 9.3.5u.6255. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/cstecgi.cgi. The manipulation leads to session expiration. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252187. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0942 | A vulnerability was found in Totolink N200RE V5 9.3.5u.6255_B20211224. It has been classified as problematic. Affected is an unknown function of the file /cgi-bin/cstecgi.cgi. The manipulation leads to session expiration. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. VDB-252186 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0769 | ** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DIR-859 1.06B01. It has been rated as critical. Affected by this issue is some unknown functionality of the file /hedwig.cgi of the component HTTP POST Request Handler. The manipulation of the argument service with the input ../../../../htdocs/webinc/getcfg/DHCPS6.BRIDGE-1.xml leads to path traversal. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-251666 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced. |
| CVE-2024-0578 | A vulnerability classified as critical has been found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected is the function UploadCustomModule of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument File leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-250794 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0577 | A vulnerability was found in Totolink LR1200GB 9.1.0u.6619_B20230130. It has been rated as critical. This issue affects the function setLanguageCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument lang leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-250793 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0576 | A vulnerability was found in Totolink LR1200GB 9.1.0u.6619_B20230130. It has been declared as critical. This vulnerability affects the function setIpPortFilterRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument sPort leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-250792. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0575 | A vulnerability was found in Totolink LR1200GB 9.1.0u.6619_B20230130. It has been classified as critical. This affects the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument command leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-250791. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0574 | A vulnerability was found in Totolink LR1200GB 9.1.0u.6619_B20230130 and classified as critical. Affected by this issue is the function setParentalRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument sTime leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-250790 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0573 | A vulnerability has been found in Totolink LR1200GB 9.1.0u.6619_B20230130 and classified as critical. Affected by this vulnerability is the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-250789 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0572 | A vulnerability, which was classified as critical, was found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected is the function setOpModeCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument pppoeUser leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-250788. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0571 | A vulnerability, which was classified as critical, has been found in Totolink LR1200GB 9.1.0u.6619_B20230130. This issue affects the function setSmsCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument text leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-250787. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0570 | A vulnerability classified as critical was found in Totolink N350RT 9.3.5u.6265. This vulnerability affects unknown code of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. The manipulation leads to improper access controls. The attack can be initiated remotely. It is recommended to upgrade the affected component. VDB-250786 is the identifier assigned to this vulnerability. |
| CVE-2024-0569 | A vulnerability classified as problematic has been found in Totolink T8 4.1.5cu.833_20220905. This affects the function getSysStatusCfg of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. The manipulation of the argument ssid/key leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 4.1.5cu.862_B20230228 is able to address this issue. It is recommended to upgrade the affected component. The identifier VDB-250785 was assigned to this vulnerability. |
| CVE-2024-0299 | A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216. It has been declared as critical. Affected by this vulnerability is the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument command leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249865 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0298 | A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216. It has been classified as critical. Affected is the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-249864. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0297 | A vulnerability was found in Totolink N200RE 9.3.5u.6139_B20201216 and classified as critical. This issue affects the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249863. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0296 | A vulnerability has been found in Totolink N200RE 9.3.5u.6139_B20201216 and classified as critical. This vulnerability affects the function NTPSyncWithHost of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument host_time leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-249862 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0295 | A vulnerability, which was classified as critical, was found in Totolink LR1200GB 9.1.0u.6619_B20230130. This affects the function setWanCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument hostName leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249861 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0294 | A vulnerability, which was classified as critical, has been found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected by this issue is the function setUssd of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ussd leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-249860. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0293 | A vulnerability classified as critical was found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected by this vulnerability is the function setUploadSetting of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249859. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0292 | A vulnerability classified as critical has been found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected is the function setOpModeCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument hostName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-249858 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0291 | A vulnerability was found in Totolink LR1200GB 9.1.0u.6619_B20230130. It has been rated as critical. This issue affects the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249857 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2024-0055 | Sandro Poppi, member of the AXIS OS Bug Bounty Program, has found that the VAPIX APIs mediaclip.cgi and playclip.cgi was vulnerable for file globbing which could lead to a resource exhaustion attack. Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution. |
| CVE-2024-0054 | Sandro Poppi, member of the AXIS OS Bug Bounty Program, has found that the VAPIX APIs local_list.cgi, create_overlay.cgi and irissetup.cgi was vulnerable for file globbing which could lead to a resource exhaustion attack. Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution. |
| CVE-2023-7223 | A vulnerability classified as problematic has been found in Totolink T6 4.1.9cu.5241_B20210923. This affects an unknown part of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument topicurl with the input showSyslog leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249867. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-7221 | A vulnerability was found in Totolink T6 4.1.9cu.5241_B20210923. It has been classified as critical. This affects the function main of the file /cgi-bin/cstecgi.cgi?action=login of the component HTTP POST Request Handler. The manipulation of the argument v41 leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249855. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-7220 | A vulnerability was found in Totolink NR1800X 9.1.0u.6279_B20210910 and classified as critical. Affected by this issue is the function loginAuth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument password leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-249854 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-7219 | A vulnerability has been found in Totolink N350RT 9.3.5u.6139_B202012 and classified as critical. Affected by this vulnerability is the function loginAuth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument http_host leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249853 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-7218 | A vulnerability, which was classified as critical, was found in Totolink N350RT 9.3.5u.6139_B202012. Affected is the function loginAuth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument password leads to stack-based buffer overflow. It is possible to launch the attack remotely. The identifier of this vulnerability is VDB-249852. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-7214 | A vulnerability, which was classified as critical, has been found in Totolink N350RT 9.3.5u.6139_B20201216. Affected by this issue is the function main of the file /cgi-bin/cstecgi.cgi?action=login of the component HTTP POST Request Handler. The manipulation of the argument v8 leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-249770 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-7213 | A vulnerability classified as critical was found in Totolink N350RT 9.3.5u.6139_B20201216. Affected by this vulnerability is the function main of the file /cgi-bin/cstecgi.cgi?action=login&flag=1 of the component HTTP POST Request Handler. The manipulation of the argument v33 leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249769 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-7209 | A vulnerability was found in Uniway Router up to 2.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file /boaform/device_reset.cgi of the component Device Reset Handler. The manipulation leads to denial of service. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-249758 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-7187 | A vulnerability was found in Totolink N350RT 9.3.5u.6139_B20201216. It has been rated as critical. This issue affects some unknown processing of the file /cgi-bin/cstecgi.cgi?action=login&flag=ie8 of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. The exploit has been disclosed to the public and may be used. The identifier VDB-249389 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-7095 | A vulnerability, which was classified as critical, has been found in Totolink A7100RU 7.4cu.2313_B20191024. Affected by this issue is the function main of the file /cgi-bin/cstecgi.cgi?action=login of the component HTTP POST Request Handler. The manipulation of the argument flag leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-248942 is the identifier assigned to this vulnerability. |
| CVE-2023-7092 | A vulnerability was found in Uniway UW-302VP 2.0. It has been rated as problematic. This issue affects some unknown processing of the file /boaform/wlan_basic_set.cgi of the component Admin Web Interface. The manipulation of the argument wlanssid/password leads to cross-site request forgery. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-248939. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-6906 | A vulnerability, which was classified as critical, was found in Totolink A7100RU 7.4cu.2313_B20191024. Affected is the function main of the file /cgi-bin/cstecgi.cgi?action=login of the component HTTP POST Request Handler. The manipulation of the argument flag with the input ie8 leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-248268. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-6612 | A vulnerability was found in Totolink X5000R 9.1.0cu.2300_B20230112. It has been rated as critical. This issue affects the function setDdnsCfg/setDynamicRoute/setFirewallType/setIPSecCfg/setIpPortFilterRules/setLancfg/setLoginPasswordCfg/setMacFilterRules/setMtknatCfg/setNetworkConfig/setPortForwardRules/setRemoteCfg/setSSServer/setScheduleCfg/setSmartQosCfg/setStaticDhcpRules/setStaticRoute/setVpnAccountCfg/setVpnPassCfg/setVpnUser/setWiFiAclAddConfig/setWiFiEasyGuestCfg/setWiFiGuestCfg/setWiFiRepeaterConfig/setWiFiScheduleCfg/setWizardCfg of the file /cgi-bin/cstecgi.cgi. The manipulation leads to os command injection. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-247247. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-6265 | ** UNSUPPORTED WHEN ASSIGNED ** Draytek Vigor2960 v1.5.1.4 and v1.5.1.5 are vulnerable to directory traversal via the mainfunction.cgi dumpSyslog 'option' parameter allowing an authenticated attacker with access to the web management interface to delete arbitrary files. Vigor2960 is no longer supported. |
| CVE-2023-5800 | Vintage, member of the AXIS OS Bug Bounty Program, has found that the VAPIX API create_overlay.cgi did not have a sufficient input validation allowing for a possible remote code execution. This flaw can only be exploited after authenticating with an operator- or administrator-privileged service account. Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution. |
| CVE-2023-5748 | Buffer copy without checking size of input ('Classic Buffer Overflow') vulnerability in cgi component in Synology SSL VPN Client before 1.4.7-0687 allows local users to conduct denial-of-service attacks via unspecified vectors. |
| CVE-2023-5746 | A vulnerability regarding use of externally-controlled format string is found in the cgi component. This allows remote attackers to execute arbitrary code via unspecified vectors. The following models with Synology Camera Firmware versions before 1.0.5-0185 may be affected: BC500 and TC500. |
| CVE-2023-5702 | A vulnerability was found in Viessmann Vitogate 300 up to 2.1.3.0 and classified as problematic. Affected by this issue is some unknown functionality of the file /cgi-bin/. The manipulation leads to direct request. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-243140. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-5677 | Brandon Rothel from QED Secure Solutions has found that the VAPIX API tcptest.cgi did not have a sufficient input validation allowing for a possible remote code execution. This flaw can only be exploited after authenticating with an operator- or administrator-privileged service account. The impact of exploiting this vulnerability is lower with operator-privileges compared to administrator-privileges service accounts. Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution. |
| CVE-2023-5222 | A vulnerability classified as critical was found in Viessmann Vitogate 300 up to 2.1.3.0. This vulnerability affects the function isValidUser of the file /cgi-bin/vitogate.cgi of the component Web Management Interface. The manipulation leads to use of hard-coded password. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-240364. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-51833 | A command injection issue in TRENDnet TEW-411BRPplus v.2.07_eu that allows a local attacker to execute arbitrary code via the data1 parameter in the debug.cgi page. |
| CVE-2023-51035 | TOTOLINK EX1200L V9.3.5u.6146_B20201023 is vulnerable to arbitrary command execution on the cstecgi.cgi NTPSyncWithHost interface. |
| CVE-2023-51034 | TOTOlink EX1200L V9.3.5u.6146_B20201023 is vulnerable to arbitrary command execution via the cstecgi.cgi UploadFirmwareFile interface. |
| CVE-2023-51033 | TOTOlink EX1200L V9.3.5u.6146_B20201023 is vulnerable to arbitrary command execution via the cstecgi.cgi setOpModeCfg interface. |
| CVE-2023-51028 | TOTOLINK EX1800T 9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the apcliChannel parameter of the setWiFiExtenderConfig interface of the cstecgi.cgi. |
| CVE-2023-51027 | TOTOlink EX1800T V9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the ‘apcliAuthMode’ parameter of the setWiFiExtenderConfig interface of the cstecgi .cgi. |
| CVE-2023-51026 | TOTOlink EX1800T V9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the ‘hour’ parameter of the setRebootScheCfg interface of the cstecgi .cgi. |
| CVE-2023-51025 | TOTOlink EX1800T V9.1.0cu.2112_B20220316 is vulnerable to an unauthorized arbitrary command execution in the ‘admuser’ parameter of the setPasswordCfg interface of the cstecgi .cgi. |
| CVE-2023-51024 | TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the ‘tz’ parameter of the setNtpCfg interface of the cstecgi .cgi. |
| CVE-2023-51023 | TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to arbitrary command execution in the ‘host_time’ parameter of the NTPSyncWithHost interface of the cstecgi .cgi. |
| CVE-2023-51022 | TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the ‘langFlag’ parameter of the setLanguageCfg interface of the cstecgi .cgi. |
| CVE-2023-51021 | TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the ‘merge’ parameter of the setRptWizardCfg interface of the cstecgi .cgi. |
| CVE-2023-51020 | TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the ‘langType’ parameter of the setLanguageCfg interface of the cstecgi .cgi. |
| CVE-2023-51019 | TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the ‘key5g’ parameter of the setWiFiExtenderConfig interface of the cstecgi .cgi. |
| CVE-2023-51018 | TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the ‘opmode’ parameter of the setWiFiApConfig interface of the cstecgi .cgi. |
| CVE-2023-51017 | TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the lanIp parameter’ of the setLanConfig interface of the cstecgi .cgi. |
| CVE-2023-51016 | TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the setRebootScheCfg interface of the cstecgi .cgi. |
| CVE-2023-51015 | TOTOLINX EX1800T v9.1.0cu.2112_B20220316 is vulnerable to arbitrary command execution in the ‘enable parameter’ of the setDmzCfg interface of the cstecgi .cgi |
| CVE-2023-51014 | TOTOLINK EX1800T V9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the lanSecDns parameter’ of the setLanConfig interface of the cstecgi .cgi |
| CVE-2023-51013 | TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the lanNetmask parameter’ of the setLanConfig interface of the cstecgi .cgi. |
| CVE-2023-51012 | TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the lanGateway parameter’ of the setLanConfig interface of the cstecgi .cgi. |
| CVE-2023-51011 | TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the lanPriDns parameter’ of the setLanConfig interface of the cstecgi .cgi |
| CVE-2023-50677 | An issue in NETGEAR-DGND4000 v.1.1.00.15_1.00.15 allows a remote attacker to escalate privileges via the next_file parameter to the /setup.cgi component. |
| CVE-2023-50651 | TOTOLINK X6000R v9.4.0cu.852_B20230719 was discovered to contain a remote command execution (RCE) vulnerability via the component /cgi-bin/cstecgi.cgi. |
| CVE-2023-50614 | An issue discovereed in EBYTE E880-IR01-V1.1 allows an attacker to obtain sensitive information via crafted POST request to /cgi-bin/luci. |
| CVE-2023-50469 | Shenzhen Libituo Technology Co., Ltd LBT-T300-T310 v2.2.2.6 was discovered to contain a buffer overflow via the ApCliEncrypType parameter at /apply.cgi. |
| CVE-2023-5025 | A vulnerability was found in KOHA up to 23.05.03. It has been declared as problematic. This vulnerability affects unknown code of the file /cgi-bin/koha/catalogue/search.pl of the component MARC. The manipulation leads to cross site scripting. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-239866 is the identifier assigned to this vulnerability. |
| CVE-2023-50147 | There is an arbitrary command execution vulnerability in the setDiagnosisCfg function of the cstecgi .cgi of the TOTOlink A3700R router device in its firmware version V9.1.2u.5822_B20200513. |
| CVE-2023-5009 | An issue has been discovered in GitLab EE affecting all versions starting from 13.12 before 16.2.7, all versions starting from 16.3 before 16.3.4. It was possible for an attacker to run pipeline jobs as an arbitrary user via scheduled security scan policies. This was a bypass of [CVE-2023-3932](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2023-3932) showing additional impact. |
| CVE-2023-4957 | A vulnerability of authentication bypass has been found on a Zebra Technologies ZTC ZT410-203dpi ZPL printer. This vulnerability allows an attacker that is in the same network as the printer, to change the username and password for the Web Page by sending a specially crafted POST request to the setvarsResults.cgi file. For this vulnerability to be exploitable, the printers protected mode must be disabled. |
| CVE-2023-49260 | An XSS attack can be performed by changing the MOTD banner and pointing the victim to the "terminal_tool.cgi" path. It can be used together with the vulnerability CVE-2023-49255. |
| CVE-2023-49258 | User browser may be forced to execute JavaScript and pass the authentication cookie to the attacker leveraging the XSS vulnerability located at "/gui/terminal_tool.cgi" in the "data" parameter. |
| CVE-2023-49257 | An authenticated user is able to upload an arbitrary CGI-compatible file using the certificate upload utility and execute it with the root user privileges. |
| CVE-2023-48842 | D-Link Go-RT-AC750 revA_v101b03 was discovered to contain a command injection vulnerability via the service parameter at hedwig.cgi. |
| CVE-2023-47307 | Buffer Overflow vulnerability in /apply.cgi in Shenzhen Libituo Technology Co., Ltd LBT-T300-T310 v2.2.2.6 allows attackers to cause a denial of service via the ApCliAuthMode parameter. |
| CVE-2023-46510 | An issue in ZIONCOM (Hong Kong) Technology Limited A7000R v.4.1cu.4154 allows an attacker to execute arbitrary code via the cig-bin/cstecgi.cgi to the settings/setPasswordCfg function. |
| CVE-2023-46485 | An issue in TOTOlink X6000R V9.4.0cu.852_B20230719 allows a remote attacker to execute arbitrary code via the setTracerouteCfg function of the stecgi.cgi component. |
| CVE-2023-46396 | Audimex 15.0.0 is vulnerable to Cross Site Scripting (XSS) in /audimex/cgi-bin/wal.fcgi via company parameter search filters. |
| CVE-2023-4610 | ** REJECT ** The SRCU code was added in upstream kernel v6.4-rc1 and removed before v6.4. This bug only existed in development kernels. Please see https://lore.kernel.org/all/ZTKVfoQZplpB8rki@casper.infradead.org and https://bugzilla.suse.com/show_bug.cgi?id=1215932 for more information. |
| CVE-2023-45852 | In Vitogate 300 2.1.3.0, /cgi-bin/vitogate.cgi allows an unauthenticated attacker to bypass authentication and execute arbitrary commands via shell metacharacters in the ipaddr params JSON data for the put method. |
| CVE-2023-45744 | A data integrity vulnerability exists in the web interface /cgi-bin/upload_config.cgi functionality of Peplink Smart Reader v1.2.0 (in QEMU). A specially crafted HTTP request can lead to configuration modification. An attacker can make an unauthenticated HTTP request to trigger this vulnerability. |
| CVE-2023-45209 | An information disclosure vulnerability exists in the web interface /cgi-bin/download_config.cgi functionality of Peplink Smart Reader v1.2.0 (in QEMU). A specially crafted HTTP request can lead to a disclosure of sensitive information. An attacker can make an unauthenticated HTTP request to trigger this vulnerability. |
| CVE-2023-44961 | SQL Injection vulnerability in Koha Library Software 23.0.5.04 and before allows a remote attacker to obtain sensitive information via the intranet/cgi bin/cataloging/ysearch.pl. component. |
| CVE-2023-43492 | In Weintek's cMT3000 HMI Web CGI device, the cgi-bin codesys.cgi contains a stack-based buffer overflow, which could allow an anonymous attacker to hijack control flow and bypass login authentication. |
| CVE-2023-43491 | An information disclosure vulnerability exists in the web interface /cgi-bin/debug_dump.cgi functionality of Peplink Smart Reader v1.2.0 (in QEMU). A specially crafted HTTP request can lead to a disclosure of sensitive information. An attacker can make an unauthenticated HTTP request to trigger this vulnerability. |
| CVE-2023-43478 | fake_upload.cgi on the Telstra Smart Modem Gen 2 (Arcadyan LH1000), firmware versions < 0.18.15r, allows unauthenticated attackers to upload firmware images and configuration backups, which could allow them to alter the firmware or the configuration on the device, ultimately leading to code execution as root. |
| CVE-2023-43477 | The ping_from parameter of ping_tracerte.cgi in the web UI of Telstra Smart Modem Gen 2 (Arcadyan LH1000), firmware versions < 0.18.15r, was not properly sanitized before being used in a system call, which could allow an authenticated attacker to achieve command injection as root on the device. |
| CVE-2023-43238 | D-Link DIR-816 A2 v1.10CNB05 was discovered to contain a stack overflow via parameter nvmacaddr in form2Dhcpip.cgi. |
| CVE-2023-43199 | D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a stack overflow via the prev parameter in the H5/login.cgi function. |
| CVE-2023-42503 | Improper Input Validation, Uncontrolled Resource Consumption vulnerability in Apache Commons Compress in TAR parsing.This issue affects Apache Commons Compress: from 1.22 before 1.24.0. Users are recommended to upgrade to version 1.24.0, which fixes the issue. A third party can create a malformed TAR file by manipulating file modification times headers, which when parsed with Apache Commons Compress, will cause a denial of service issue via CPU consumption. In version 1.22 of Apache Commons Compress, support was added for file modification times with higher precision (issue # COMPRESS-612 [1]). The format for the PAX extended headers carrying this data consists of two numbers separated by a period [2], indicating seconds and subsecond precision (for example “1647221103.5998539”). The impacted fields are “atime”, “ctime”, “mtime” and “LIBARCHIVE.creationtime”. No input validation is performed prior to the parsing of header values. Parsing of these numbers uses the BigDecimal [3] class from the JDK which has a publicly known algorithmic complexity issue when doing operations on large numbers, causing denial of service (see issue # JDK-6560193 [4]). A third party can manipulate file time headers in a TAR file by placing a number with a very long fraction (300,000 digits) or a number with exponent notation (such as “9e9999999”) within a file modification time header, and the parsing of files with these headers will take hours instead of seconds, leading to a denial of service via exhaustion of CPU resources. This issue is similar to CVE-2012-2098 [5]. [1]: https://issues.apache.org/jira/browse/COMPRESS-612 [2]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/pax.html#tag_20_92_13_05 [3]: https://docs.oracle.com/javase/8/docs/api/java/math/BigDecimal.html [4]: https://bugs.openjdk.org/browse/JDK-6560193 [5]: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2098 Only applications using CompressorStreamFactory class (with auto-detection of file types), TarArchiveInputStream and TarFile classes to parse TAR files are impacted. Since this code was introduced in v1.22, only that version and later versions are impacted. |
| CVE-2023-41741 | Exposure of sensitive information to an unauthorized actor vulnerability in cgi component in Synology Router Manager (SRM) before 1.3.1-9346-6 allows remote attackers to obtain sensitive information via unspecified vectors. |
| CVE-2023-41740 | Improper limitation of a pathname to a restricted directory ('Path Traversal') vulnerability in cgi component in Synology Router Manager (SRM) before 1.3.1-9346-6 allows remote attackers to read specific files via unspecified vectors. |
| CVE-2023-40599 | Regular expression Denial-of-Service (ReDoS) exists in multiple add-ons for Mailform Pro CGI 4.3.1.3 and earlier, which allows a remote unauthenticated attacker to cause a denial-of-service condition. Affected add-ons are as follows: call/call.js, prefcodeadv/search.cgi, estimate/estimate.js, search/search.js, suggest/suggest.js, and coupon/coupon.js. |
| CVE-2023-40160 | Directory traversal vulnerability exists in Mailing List Search CGI (pmmls.exe) included in A.K.I Software's PMailServer/PMailServer2 products. If this vulnerability is exploited, a remote attacker may obtain arbitrary files on the server. |
| CVE-2023-40145 | In Weintek's cMT3000 HMI Web CGI device, an anonymous attacker can execute arbitrary commands after login to the device. |
| CVE-2023-39933 | Insufficient verification vulnerability exists in Broadcast Mail CGI (pmc.exe) included in A.K.I Software's PMailServer/PMailServer2 products. If this vulnerability is exploited, a user who can upload files through the product may execute an arbitrary executable file with the web server's execution privilege. |
| CVE-2023-3991 | An OS command injection vulnerability exists in the httpd iperfrun.cgi functionality of FreshTomato 2023.3. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2023-39278 | SonicOS post-authentication user assertion failure leads to Stack-Based Buffer Overflow vulnerability via main.cgi leads to a firewall crash. |
| CVE-2023-39240 | It is identified a format string vulnerability in ASUS RT-AX56U V2’s iperf client function API. This vulnerability is caused by lacking validation for a specific value within its set_iperf3_cli.cgi module. A remote attacker with administrator privilege can exploit this vulnerability to perform remote arbitrary code execution, arbitrary system operation or disrupt service. |
| CVE-2023-39239 | It is identified a format string vulnerability in ASUS RT-AX56U V2’s General function API. This vulnerability is caused by lacking validation for a specific value within its apply.cgi module. A remote attacker with administrator privilege can exploit this vulnerability to perform remote arbitrary code execution, arbitrary system operation or disrupt service. |
| CVE-2023-39238 | It is identified a format string vulnerability in ASUS RT-AX56U V2. This vulnerability is caused by lacking validation for a specific value within its set_iperf3_svr.cgi module. A remote attacker with administrator privilege can exploit this vulnerability to perform remote arbitrary code execution, arbitrary system operation or disrupt service. |
| CVE-2023-38928 | Netgear R7100LG 1.0.0.78 was discovered to contain a command injection vulnerability via the password parameter at usb_remote_invite.cgi. |
| CVE-2023-38925 | Netgear DC112A 1.0.0.64, EX6200 1.0.3.94 and R6300v2 1.0.4.8 were discovered to contain a buffer overflow via the http_passwd parameter in password.cgi. |
| CVE-2023-38924 | Netgear DGN3500 1.1.00.37 was discovered to contain a buffer overflow via the http_password parameter at setup.cgi. |
| CVE-2023-38902 | A command injection vulnerability in RG-EW series home routers and repeaters v.EW_3.0(1)B11P219, RG-NBS and RG-S1930 series switches v.SWITCH_3.0(1)B11P219, RG-EG series business VPN routers v.EG_3.0(1)B11P219, EAP and RAP series wireless access points v.AP_3.0(1)B11P219, and NBC series wireless controllers v.AC_3.0(1)B11P219 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /cgi-bin/luci/api/cmd via the remoteIp field. |
| CVE-2023-38861 | An issue in Wavlink WL_WNJ575A3 v.R75A3_V1410_220513 allows a remote attacker to execute arbitrary code via username parameter of the set_sys_adm function in adm.cgi. |
| CVE-2023-38591 | Netgear DG834Gv5 1.6.01.34 was discovered to contain multiple buffer overflows via the wla_ssid and wla_temp_ssid parameters at bsw_ssid.cgi. |
| CVE-2023-38584 | In Weintek's cMT3000 HMI Web CGI device, the cgi-bin command_wb.cgi contains a stack-based buffer overflow, which could allow an anonymous attacker to hijack control flow and bypass login authentication. |
| CVE-2023-38412 | Netgear R6900P v1.3.3.154 was discovered to contain multiple buffer overflows via the wla_ssid and wlg_ssid parameters at ia_ap_setting.cgi. |
| CVE-2023-38379 | The web interface on the RIGOL MSO5000 digital oscilloscope with firmware 00.01.03.00.03 allows remote attackers to change the admin password via a zero-length pass0 to the webcontrol changepwd.cgi application, i.e., the entered password only needs to match the first zero characters of the saved password. |
| CVE-2023-38378 | The web interface on the RIGOL MSO5000 digital oscilloscope with firmware 00.01.03.00.03 allows remote attackers to execute arbitrary code via shell metacharacters in pass1 to the webcontrol changepwd.cgi application. |
| CVE-2023-37927 | The improper neutralization of special elements in the CGI program of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an authenticated attacker to execute some operating system (OS) commands by sending a crafted URL to a vulnerable device. |
| CVE-2023-37758 | D-LINK DIR-815 v1.01 was discovered to contain a buffer overflow via the component /web/captcha.cgi. |
| CVE-2023-36499 | Netgear XR300 v1.0.3.78 was discovered to contain multiple buffer overflows via the wla_ssid and wlg_ssid parameters at genie_ap_wifi_change.cgi. |
| CVE-2023-36479 | Eclipse Jetty Canonical Repository is the canonical repository for the Jetty project. Users of the CgiServlet with a very specific command structure may have the wrong command executed. If a user sends a request to a org.eclipse.jetty.servlets.CGI Servlet for a binary with a space in its name, the servlet will escape the command by wrapping it in quotation marks. This wrapped command, plus an optional command prefix, will then be executed through a call to Runtime.exec. If the original binary name provided by the user contains a quotation mark followed by a space, the resulting command line will contain multiple tokens instead of one. This issue was patched in version 9.4.52, 10.0.16, 11.0.16 and 12.0.0-beta2. |
| CVE-2023-35968 | Two heap-based buffer overflow vulnerabilities exist in the gwcfg_cgi_set_manage_post_data functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to a heap buffer overflow. An attacker can send a network request to trigger these vulnerabilities.This integer overflow result is used as argument for the realloc function. |
| CVE-2023-35967 | Two heap-based buffer overflow vulnerabilities exist in the gwcfg_cgi_set_manage_post_data functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to a heap buffer overflow. An attacker can send a network request to trigger these vulnerabilities.This integer overflow result is used as argument for the malloc function. |
| CVE-2023-35194 | An OS command injection vulnerability exists in the api.cgi cmd.mvpn.x509.write functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability is specifically for the `system` call in the file `/web/MANGA/cgi-bin/api.cgi` for firmware version 6.3.5 at offset `0x4bde44`. |
| CVE-2023-35193 | An OS command injection vulnerability exists in the api.cgi cmd.mvpn.x509.write functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability is specifically for the `system` call in the file `/web/MANGA/cgi-bin/api.cgi` for firmware version 6.3.5 at offset 0x4bddb8. |
| CVE-2023-35139 | A cross-site scripting (XSS) vulnerability in the CGI program of the Zyxel ATP series firmware versions 5.10 through 5.37, USG FLEX series firmware versions 5.00 through 5.37, USG FLEX 50(W) series firmware versions 5.10 through 5.37, USG20(W)-VPN series firmware versions 5.10 through 5.37, and VPN series firmware versions 5.00 through 5.37, could allow an unauthenticated LAN-based attacker to store malicious scripts in a vulnerable device. A successful XSS attack could then result in the stored malicious scripts being executed to steal cookies when the user visits the specific CGI used for dumping ZTP logs. |
| CVE-2023-35086 | It is identified a format string vulnerability in ASUS RT-AX56U V2 & RT-AC86U. This vulnerability is caused by directly using input as a format string when calling syslog in logmessage_normal function, in the do_detwan_cgi module of httpd. A remote attacker with administrator privilege can exploit this vulnerability to perform remote arbitrary code execution, arbitrary system operation or disrupt service. This issue affects RT-AX56U V2: 3.0.0.4.386_50460; RT-AC86U: 3.0.0.4_386_51529. |
| CVE-2023-35056 | A buffer overflow vulnerability exists in the httpd next_page functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger this vulnerability.This buffer overflow is in the next_page parameter in the cgi_handler function. |
| CVE-2023-35055 | A buffer overflow vulnerability exists in the httpd next_page functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger this vulnerability.This buffer overflow is in the next_page parameter in the gozila_cgi function. |
| CVE-2023-34856 | A Cross Site Scripting (XSS) vulnerability in D-Link DI-7500G-CI-19.05.29A allows attackers to execute arbitrary code via uploading a crafted HTML file to the interface /auth_pic.cgi. |
| CVE-2023-34855 | A Cross Site Scripting (XSS) vulnerability in Youxun Electronic Equipment (Shanghai) Co., Ltd AC Centralized Management Platform v1.02.040 allows attackers to execute arbitrary code via uploading a crafted HTML file to the interface /upfile.cgi. |
| CVE-2023-34644 | Remote code execution vulnerability in Ruijie Networks Product: RG-EW series home routers and repeaters EW_3.0(1)B11P204, RG-NBS and RG-S1930 series switches SWITCH_3.0(1)B11P218, RG-EG series business VPN routers EG_3.0(1)B11P216, EAP and RAP series wireless access points AP_3.0(1)B11P218, NBC series wireless controllers AC_3.0(1)B11P86 allows unauthorized remote attackers to gain the highest privileges via crafted POST request to /cgi-bin/luci/api/auth. |
| CVE-2023-34356 | An OS command injection vulnerability exists in the data.cgi xfer_dns functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2023-34354 | A stored cross-site scripting (XSS) vulnerability exists in the upload_brand.cgi functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to execution of arbitrary javascript in another user's browser. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2023-34346 | A stack-based buffer overflow vulnerability exists in the httpd gwcfg.cgi get functionality of Yifan YF325 v1.0_20221108. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. |
| CVE-2023-3380 | A vulnerability classified as critical has been found in Wavlink WN579X3 up to 20230615. Affected is an unknown function of the file /cgi-bin/adm.cgi of the component Ping Test. The manipulation of the argument pingIp leads to injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-232236. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-33626 | D-Link DIR-600 Hardware Version B5, Firmware Version 2.18 was discovered to contain a stack overflow via the gena.cgi binary. |
| CVE-2023-33412 | The web interface in the Intelligent Platform Management Interface (IPMI) baseboard management controller (BMC) implementation on Supermicro X11 and M11 based devices, with firmware versions before 3.17.02, allows remote authenticated users to execute arbitrary commands via a crafted request targeting vulnerable cgi endpoints. |
| CVE-2023-33274 | The authentication mechanism in PowerShield SNMP Web Pro 1.1 contains a vulnerability that allows unauthenticated users to directly access Common Gateway Interface (CGI) scripts without proper identification or authorization. This vulnerability arises from a lack of proper cookie verification and affects all instances of SNMP Web Pro 1.1 without HTTP Digest authentication enabled, regardless of the password used for the web interface. |
| CVE-2023-3305 | A vulnerability was found in C-DATA Web Management System up to 20230607. It has been classified as critical. This affects an unknown part of the file /cgi-bin/jumpto.php?class=user&page=config_save&isphp=1 of the component User Creation Handler. The manipulation of the argument user/newpassword leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-231801 was assigned to this vulnerability. |
| CVE-2023-32956 | Improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in CGI component in Synology Router Manager (SRM) before 1.2.5-8227-6 and 1.3.1-9346-3 allows remote attackers to execute arbitrary code via unspecified vectors. |
| CVE-2023-32610 | Mailform Pro CGI 4.3.1.2 and earlier allows a remote unauthenticated attacker to cause a denial-of-service (DoS) condition. |
| CVE-2023-3206 | A vulnerability classified as problematic was found in Chengdu VEC40G 3.0. Affected by this vulnerability is an unknown functionality of the file /send_order.cgi?parameter=restart. The manipulation of the argument restart with the input reboot leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-231229 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-31853 | Cudy LT400 1.13.4 is vulnerable Cross Site Scripting (XSS) in /cgi-bin/luci/admin/network/bandwidth via the icon parameter. |
| CVE-2023-31852 | Cudy LT400 1.13.4 is vulnerable to Cross Site Scripting (XSS) in cgi-bin/luci/admin/network/wireless/config via the iface parameter. |
| CVE-2023-31851 | Cudy LT400 1.13.4 is has a cross-site scripting (XSS) vulnerability in /cgi-bin/luci/admin/network/wireless/status via the iface parameter. |
| CVE-2023-31740 | There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters WL_atten_bb, WL_atten_radio, and WL_atten_ctl in the apply.cgi interface, thereby gaining shell privileges. |
| CVE-2023-31729 | TOTOLINK A3300R v17.0.0cu.557 is vulnerable to Command Injection via /cgi-bin/cstecgi.cgi. |
| CVE-2023-31447 | user_login.cgi on Draytek Vigor2620 devices before 3.9.8.4 (and on all versions of Vigor2925 devices) allows attackers to send a crafted payload to modify the content of the code segment, insert shellcode, and execute arbitrary code. |
| CVE-2023-30806 | The Sangfor Next-Gen Application Firewall version NGAF8.0.17 is vulnerable to an operating system command injection vulnerability. A remote and unauthenticated attacker can execute arbitrary commands by sending a crafted HTTP POST request to the /cgi-bin/login.cgi endpoint. This is due to mishandling of shell meta-characters in the PHPSESSID cookie. |
| CVE-2023-30280 | Buffer Overflow vulnerability found in Netgear R6900 v.1.0.2.26, R6700v3 v.1.0.4.128, R6700 v.1.0.0.26 allows a remote attacker to execute arbitrary code and cause a denial ofservice via the getInputData parameter of the fwSchedule.cgi page. |
| CVE-2023-29709 | An issue was discovered in /cgi-bin/login_rj.cgi in Wildix WSG24POE version 103SP7D190822, allows attackers to bypass authentication. |
| CVE-2023-29708 | An issue was discovered in /cgi-bin/adm.cgi in WavLink WavRouter version RPT70HA1.x, allows attackers to force a factory reset via crafted payload. |
| CVE-2023-28770 | The sensitive information exposure vulnerability in the CGI “Export_Log” and the binary “zcmd” in Zyxel DX5401-B0 firmware versions prior to V5.17(ABYO.1)C0 could allow a remote unauthenticated attacker to read the system files and to retrieve the password of the supervisor from the encrypted file. |
| CVE-2023-28703 | ASUS RT-AC86U’s specific cgi function has a stack-based buffer overflow vulnerability due to insufficient validation for network packet header length. A remote attacker with administrator privileges can exploit this vulnerability to execute arbitrary system commands, disrupt system or terminate service. |
| CVE-2023-28381 | An OS command injection vulnerability exists in the admin.cgi MVPN_trial_init functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2023-27989 | A buffer overflow vulnerability in the CGI program of the Zyxel NR7101 firmware versions prior to V1.00(ABUV.8)C0 could allow a remote authenticated attacker to cause denial of service (DoS) conditions by sending a crafted HTTP request to a vulnerable device. |
| CVE-2023-27852 | NETGEAR Nighthawk WiFi6 Router prior to V1.0.10.94 contains a buffer overflow vulnerability in various CGI mechanisms that could allow an attacker to execute arbitrary code on the device. |
| CVE-2023-27380 | An OS command injection vulnerability exists in the admin.cgi USSD_send functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2023-2682 | A vulnerability was found in Caton Live up to 2023-04-26 and classified as critical. This issue affects some unknown processing of the file /cgi-bin/ping.cgi of the component Mini_HTTPD. The manipulation of the argument address with the input ;id;uname${IFS}-a leads to command injection. The attack may be initiated remotely. The associated identifier of this vulnerability is VDB-228911. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-26802 | An issue in the component /network_config/nsg_masq.cgi of DCN (Digital China Networks) DCBI-Netlog-LAB v1.0 allows attackers to bypass authentication and execute arbitrary commands via a crafted request. |
| CVE-2023-26609 | ABUS TVIP 20000-21150 devices allows remote attackers to execute arbitrary code via shell metacharacters in the /cgi-bin/mft/wireless_mft ap field. |
| CVE-2023-2522 | A vulnerability was found in Chengdu VEC40G 3.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /send_order.cgi?parameter=access_detect of the component Network Detection. The manipulation of the argument COUNT with the input 3 | netstat -an leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-228013 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-2520 | A vulnerability was found in Caton Prime 2.1.2.51.e8d7225049(202303031001) and classified as critical. This issue affects some unknown processing of the file cgi-bin/tools_ping.cgi?action=Command of the component Ping Handler. The manipulation of the argument Destination leads to command injection. The attack may be initiated remotely. The associated identifier of this vulnerability is VDB-228011. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-24814 | TYPO3 is a free and open source Content Management Framework released under the GNU General Public License. In affected versions the TYPO3 core component `GeneralUtility::getIndpEnv()` uses the unfiltered server environment variable `PATH_INFO`, which allows attackers to inject malicious content. In combination with the TypoScript setting `config.absRefPrefix=auto`, attackers can inject malicious HTML code to pages that have not been rendered and cached, yet. As a result, injected values would be cached and delivered to other website visitors (persisted cross-site scripting). Individual code which relies on the resolved value of `GeneralUtility::getIndpEnv('SCRIPT_NAME')` and corresponding usages (as shown below) are vulnerable as well. Additional investigations confirmed that at least Apache web server deployments using CGI (FPM, FCGI/FastCGI, and similar) are affected. However, there still might be the risk that other scenarios like nginx, IIS, or Apache/mod_php are vulnerable. The usage of server environment variable `PATH_INFO` has been removed from corresponding processings in `GeneralUtility::getIndpEnv()`. Besides that, the public property `TypoScriptFrontendController::$absRefPrefix` is encoded for both being used as a URI component and for being used as a prefix in an HTML context. This mitigates the cross-site scripting vulnerability. Users are advised to update to TYPO3 versions 8.7.51 ELTS, 9.5.40 ELTS, 10.4.35 LTS, 11.5.23 LTS and 12.2.0 which fix this problem. For users who are unable to patch in a timely manner the TypoScript setting `config.absRefPrefix` should at least be set to a static path value, instead of using auto - e.g. `config.absRefPrefix=/`. This workaround **does not fix all aspects of the vulnerability**, and is just considered to be an intermediate mitigation to the most prominent manifestation. |
| CVE-2023-24479 | An authentication bypass vulnerability exists in the httpd nvram.cgi functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to arbitrary command execution. An attacker can send a network request to trigger this vulnerability. |
| CVE-2023-24229 | ** UNSUPPORTED WHEN ASSIGNED ** DrayTek Vigor2960 v1.5.1.4 allows an authenticated attacker with network access to the web management interface to inject operating system commands via the mainfunction.cgi 'parameter' parameter. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| CVE-2023-24155 | TOTOLINK T8 V4.1.5cu was discovered to contain a hard code password for the telnet service which is stored in the component /web_cste/cgi-bin/product.ini. |
| CVE-2023-2393 | A vulnerability was found in Netgear SRX5308 up to 4.3.5-3. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file scgi-bin/platform.cgi?page=dmz_setup.htm of the component Web Management Interface. The manipulation of the argument ConfigPort.LogicalIfName leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-227671. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-2392 | A vulnerability was found in Netgear SRX5308 up to 4.3.5-3. It has been classified as problematic. Affected is an unknown function of the file scgi-bin/platform.cgi?page=time_zone.htm of the component Web Management Interface. The manipulation of the argument ManualDate.minutes leads to cross site scripting. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-227670 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-2391 | A vulnerability was found in Netgear SRX5308 up to 4.3.5-3 and classified as problematic. This issue affects some unknown processing of the file scgi-bin/platform.cgi?page=time_zone.htm of the component Web Management Interface. The manipulation of the argument ntp.server2 leads to cross site scripting. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-227669 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-2390 | A vulnerability has been found in Netgear SRX5308 up to 4.3.5-3 and classified as problematic. This vulnerability affects unknown code of the file scgi-bin/platform.cgi?page=time_zone.htm of the component Web Management Interface. The manipulation of the argument ntp.server1 leads to cross site scripting. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-227668. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-2389 | A vulnerability, which was classified as problematic, was found in Netgear SRX5308 up to 4.3.5-3. This affects an unknown part of the file scgi-bin/platform.cgi?page=firewall_logs_email.htm of the component Web Management Interface. The manipulation of the argument smtpServer.emailServer leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-227667. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-2388 | A vulnerability, which was classified as problematic, has been found in Netgear SRX5308 up to 4.3.5-3. Affected by this issue is some unknown functionality of the file scgi-bin/platform.cgi?page=firewall_logs_email.htm of the component Web Management Interface. The manipulation of the argument smtpServer.fromAddr leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-227666 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-2387 | A vulnerability classified as problematic was found in Netgear SRX5308 up to 4.3.5-3. Affected by this vulnerability is an unknown functionality of the file scgi-bin/platform.cgi?page=dmz_setup.htm of the component Web Management Interface. The manipulation of the argument winsServer1 leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-227665 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-2386 | A vulnerability classified as problematic has been found in Netgear SRX5308 up to 4.3.5-3. Affected is an unknown function of the file scgi-bin/platform.cgi?page=firewall_logs_email.htm of the component Web Management Interface. The manipulation of the argument smtpServer.toAddr leads to cross site scripting. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-227664. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-2385 | A vulnerability was found in Netgear SRX5308 up to 4.3.5-3. It has been rated as problematic. This issue affects some unknown processing of the file scgi-bin/platform.cgi?page=ike_policies.htm of the component Web Management Interface. The manipulation of the argument IpsecIKEPolicy.IKEPolicyName leads to cross site scripting. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-227663. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-2384 | A vulnerability was found in Netgear SRX5308 up to 4.3.5-3. It has been declared as problematic. This vulnerability affects unknown code of the file scgi-bin/platform.cgi?page=dmz_setup.htm of the component Web Management Interface. The manipulation of the argument dhcp.SecDnsIPByte2 leads to cross site scripting. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-227662 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-2383 | A vulnerability was found in Netgear SRX5308 up to 4.3.5-3. It has been classified as problematic. This affects an unknown part of the file scgi-bin/platform.cgi?page=firewall_logs_email.htm of the component Web Management Interface. The manipulation of the argument smtpServer.fromAddr leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-227661 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-2382 | A vulnerability was found in Netgear SRX5308 up to 4.3.5-3 and classified as problematic. Affected by this issue is some unknown functionality of the file scgi-bin/platform.cgi?page=firewall_logs_email.htm of the component Web Management Interface. The manipulation of the argument sysLogInfo.serverName leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-227660. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-2381 | A vulnerability has been found in Netgear SRX5308 up to 4.3.5-3 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file scgi-bin/platform.cgi?page=bandwidth_profile.htm of the component Web Management Interface. The manipulation of the argument BandWidthProfile.ProfileName leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-227659. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2023-23313 | Certain Draytek products are vulnerable to Cross Site Scripting (XSS) via the wlogin.cgi script and user_login.cgi script of the router's web application management portal. This affects Vigor3910, Vigor1000B, Vigor2962 v4.3.2.1; Vigor2865 and Vigor2866 v4.4.1.0; Vigor2927 v4.4.2.2; and Vigor2915, Vigor2765, Vigor2766, Vigor2135 v4.4.2.0; Vigor2763 v4.4.2.1; Vigor2862 and Vigor2926 v3.9.9.0; Vigor2925 v3.9.3; Vigor2952 and Vigor3220 v3.9.7.3; Vigor2133 and Vigor2762 v3.9.6.4; and Vigor2832 v3.9.6.2. |
| CVE-2023-23063 | Cellinx NVT v1.0.6.002b was discovered to contain a local file disclosure vulnerability via the component /cgi-bin/GetFileContent.cgi. |
| CVE-2023-22918 | A post-authentication information exposure vulnerability in the CGI program of Zyxel ATP series firmware versions 4.32 through 5.35, USG FLEX series firmware versions 4.50 through 5.35, USG FLEX 50(W) firmware versions 4.16 through 5.35, USG20(W)-VPN firmware versions 4.16 through 5.35, VPN series firmware versions 4.30 through 5.35, NWA110AX firmware version 6.50(ABTG.2) and earlier versions, WAC500 firmware version 6.50(ABVS.0) and earlier versions, and WAX510D firmware version 6.50(ABTF.2) and earlier versions, which could allow a remote authenticated attacker to retrieve encrypted information of the administrator on an affected device. |
| CVE-2023-22915 | A buffer overflow vulnerability in the “fbwifi_forward.cgi” CGI program of Zyxel USG FLEX series firmware versions 4.50 through 5.35, USG FLEX 50(W) firmware versions 4.30 through 5.35, USG20(W)-VPN firmware versions 4.30 through 5.35, and VPN series firmware versions 4.30 through 5.35, which could allow a remote unauthenticated attacker to cause DoS conditions by sending a crafted HTTP request if the Facebook WiFi function were enabled on an affected device. |
| CVE-2023-22914 | A path traversal vulnerability in the “account_print.cgi” CGI program of Zyxel USG FLEX series firmware versions 4.50 through 5.35, and VPN series firmware versions 4.30 through 5.35, which could allow a remote authenticated attacker with administrator privileges to execute unauthorized OS commands in the “tmp” directory by uploading a crafted file if the hotspot function were enabled. |
| CVE-2023-22913 | A post-authentication command injection vulnerability in the “account_operator.cgi” CGI program of Zyxel USG FLEX series firmware versions 4.50 through 5.35, and VPN series firmware versions 4.30 through 5.35, which could allow a remote authenticated attacker to modify device configuration data, resulting in denial-of-service (DoS) conditions on an affected device. |
| CVE-2023-22897 | An issue was discovered in SecurePoint UTM before 12.2.5.1. The firewall's endpoint at /spcgi.cgi allows information disclosure of memory contents to be achieved by an authenticated user. Essentially, uninitialized data can be retrieved via an approach in which a sessionid is obtained but not used. |
| CVE-2023-22816 | A post-authentication remote command injection vulnerability in a CGI file in Western Digital My Cloud OS 5 devices that could allow an attacker to build files with redirects and execute larger payloads. This issue affects My Cloud OS 5 devices: before 5.26.300. |
| CVE-2023-22815 | Post-authentication remote command injection vulnerability in Western Digital My Cloud OS 5 devices that could allow an attacker to execute code in the context of the root user on vulnerable CGI files. This vulnerability can only be exploited over the network and the attacker must already have admin/root privileges to carry out the exploit. An authentication bypass is required for this exploit, thereby making it more complex. The attack may not require user interaction. Since an attacker must already be authenticated, the confidentiality impact is low while the integrity and availability impact is high. This issue affects My Cloud OS 5 devices: before 5.26.300. |
| CVE-2023-22620 | An issue was discovered in SecurePoint UTM before 12.2.5.1. The firewall's endpoint at /spcgi.cgi allows sessionid information disclosure via an invalid authentication attempt. This can afterwards be used to bypass the device's authentication and get access to the administrative interface. |
| CVE-2023-22374 | A format string vulnerability exists in iControl SOAP that allows an authenticated attacker to crash the iControl SOAP CGI process or, potentially execute arbitrary code. In appliance mode BIG-IP, a successful exploit of this vulnerability can allow the attacker to cross a security boundary. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| CVE-2023-21418 | Sandro Poppi, member of the AXIS OS Bug Bounty Program, has found that the VAPIX API irissetup.cgi was vulnerable to path traversal attacks that allows for file deletion. This flaw can only be exploited after authenticating with an operator- or administrator-privileged service account. The impact of exploiting this vulnerability is lower with operator service accounts and limited to non-system files compared to administrator-privileges. Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution. |
| CVE-2023-21417 | Sandro Poppi, member of the AXIS OS Bug Bounty Program, has found that the VAPIX API manageoverlayimage.cgi was vulnerable to path traversal attacks that allows for file/folder deletion. This flaw can only be exploited after authenticating with an operator- or administrator- privileged service account. The impact of exploiting this vulnerability is lower with operator service accounts and limited to non-system files compared to administrator-privileges. Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution. |
| CVE-2023-21416 | Sandro Poppi, member of the AXIS OS Bug Bounty Program, has found that the VAPIX API dynamicoverlay.cgi was vulnerable to a Denial-of-Service attack allowing for an attacker to block access to the overlay configuration page in the web interface of the Axis device. This flaw can only be exploited after authenticating with an operator- or administrator-privileged service account however the impact is equal. Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution. |
| CVE-2023-21415 | Sandro Poppi, member of the AXIS OS Bug Bounty Program, has found that the VAPIX API overlay_del.cgi is vulnerable to path traversal attacks that allows for file deletion. This flaw can only be exploited after authenticating with an operator- or administrator-privileged service account. Axis has released patched AXIS OS versions for the highlighted flaw. Please refer to the Axis security advisory for more information and solution. |
| CVE-2023-1389 | TP-Link Archer AX21 (AX1800) firmware versions before 1.1.4 Build 20230219 contained a command injection vulnerability in the country form of the /cgi-bin/luci;stok=/locale endpoint on the web management interface. Specifically, the country parameter of the write operation was not sanitized before being used in a call to popen(), allowing an unauthenticated attacker to inject commands, which would be run as root, with a simple POST request. |
| CVE-2023-1163 | ** UNSUPPORTED WHEN ASSIGNED ** A vulnerability has been found in DrayTek Vigor 2960 1.5.1.4/1.5.1.5 and classified as critical. Affected by this vulnerability is the function getSyslogFile of the file mainfunction.cgi of the component Web Management Interface. The manipulation of the argument option leads to path traversal. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-222259. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| CVE-2023-1162 | ** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in DrayTek Vigor 2960 1.5.1.4/1.5.1.5. Affected is an unknown function of the file mainfunction.cgi of the component Web Management Interface. The manipulation of the argument password leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-222258 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| CVE-2023-1009 | ** UNSUPPORTED WHEN ASSIGNED ** A vulnerability classified as critical has been found in DrayTek Vigor 2960 1.5.1.4/1.5.1.5. Affected is the function sub_1DF14 of the file /cgi-bin/mainfunction.cgi of the component Web Management Interface. The manipulation of the argument option with the input /../etc/passwd- leads to path traversal. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-221742 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| CVE-2023-0587 | A file upload vulnerability in exists in Trend Micro Apex One server build 11110. Using a malformed Content-Length header in an HTTP PUT message sent to URL /officescan/console/html/cgi/fcgiOfcDDA.exe, an unauthenticated remote attacker can upload arbitrary files to the SampleSubmission directory (i.e., \PCCSRV\TEMP\SampleSubmission) on the server. The attacker can upload a large number of large files to fill up the file system on which the Apex One server is installed. |
| CVE-2023-0077 | Integer overflow or wraparound vulnerability in CGI component in Synology Router Manager (SRM) before 1.2.5-8227-6 and 1.3.1-9346-3 allows remote attackers to overflow buffers via unspecified vectors. |
| CVE-2022-48165 | An access control issue in the component /cgi-bin/ExportLogs.sh of Wavlink WL-WN530H4 M30H4.V5030.210121 allows unauthenticated attackers to download configuration data and log files and obtain admin credentials. |
| CVE-2022-48164 | An access control issue in the component /cgi-bin/ExportLogs.sh of Wavlink WL-WN533A8 M33A8.V5030.190716 allows unauthenticated attackers to download configuration data and log files and obtain admin credentials. |
| CVE-2022-47892 | All versions of NetMan 204 could allow an unauthenticated remote attacker to read a file (config.cgi) containing sensitive information, like credentials. |
| CVE-2022-45925 | An issue was discovered in OpenText Content Suite Platform 22.1 (16.2.19.1803). The action xmlexport accepts the parameter requestContext. If this parameter is present, the response includes most of the HTTP headers sent to the server and some of the CGI variables like remote_adde and server_name, which is an information disclosure. |
| CVE-2022-45923 | An issue was discovered in OpenText Content Suite Platform 22.1 (16.2.19.1803). The Common Gateway Interface (CGI) program cs.exe allows an attacker to increase/decrease an arbitrary memory address by 1 and trigger a call to a method of a vftable with a vftable pointer value chosen by the attacker. |
| CVE-2022-45028 | A cross-site scripting (XSS) vulnerability in Arris NVG443B 9.3.0h3d36 allows attackers to execute arbitrary web scripts or HTML via a crafted POST request sent to /cgi-bin/logs.ha. |
| CVE-2022-44038 | Russound XSourcePlayer 777D v06.08.03 was discovered to contain a remote code execution vulnerability via the scriptRunner.cgi component. |
| CVE-2022-43976 | An issue was discovered in FC46-WebBridge on GE Grid Solutions MS3000 devices before 3.7.6.25p0_3.2.2.17p0_4.7p0. Direct access to the API is possible on TCP port 8888 via programs located in the cgi-bin folder without any authentication. |
| CVE-2022-43973 | An arbitrary code execution vulnerability exisits in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. The Check_TSSI function within the httpd binary uses unvalidated user input in the construction of a system command. An authenticated attacker with administrator privileges can leverage this vulnerability over the network via a malicious POST request to /apply.cgi to execute arbitrary commands on the underlying Linux operating system as root. |
| CVE-2022-43971 | An arbitrary code exection vulnerability exists in Linksys WUMC710 Wireless-AC Universal Media Connector with firmware <= 1.0.02 (build3). The do_setNTP function within the httpd binary uses unvalidated user input in the construction of a system command. An authenticated attacker with administrator privileges can leverage this vulnerability over the network via a malicious GET or POST request to /setNTP.cgi to execute arbitrary commands on the underlying Linux operating system as root. |
| CVE-2022-43970 | A buffer overflow vulnerability exists in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. A stack-based buffer overflow in the Start_EPI function within the httpd binary allows an authenticated attacker with administrator privileges to execute arbitrary commands on the underlying Linux operating system as root. This vulnerablity can be triggered over the network via a malicious POST request to /apply.cgi. |
| CVE-2022-43932 | Improper neutralization of special elements in output used by a downstream component ('Injection') vulnerability in CGI component in Synology Router Manager (SRM) before 1.2.5-8227-6 and 1.3.1-9346-3 allows remote attackers to read arbitrary files via unspecified vectors. |
| CVE-2022-43548 | A OS Command Injection vulnerability exists in Node.js versions <14.21.1, <16.18.1, <18.12.1, <19.0.1 due to an insufficient IsAllowedHost check that can easily be bypassed because IsIPAddress does not properly check if an IP address is invalid before making DBS requests allowing rebinding attacks.The fix for this issue in https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-32212 was incomplete and this new CVE is to complete the fix. |
| CVE-2022-43466 | OS command injection vulnerability in Buffalo network devices allows a network-adjacent attacker with an administrative privilege to execute an arbitrary OS command if a specially crafted request is sent to a specific CGI program. |
| CVE-2022-43391 | A buffer overflow vulnerability in the parameter of the CGI program in Zyxel NR7101 firmware prior to V1.15(ACCC.3)C0, which could allow an authenticated attacker to cause denial-of-service (DoS) conditions by sending a crafted HTTP request. |
| CVE-2022-43390 | A command injection vulnerability in the CGI program of Zyxel NR7101 firmware prior to V1.15(ACCC.3)C0, which could allow an authenticated attacker to execute some OS commands on a vulnerable device by sending a crafted HTTP request. |
| CVE-2022-43184 | D-Link DIR878 1.30B08 Hotfix_04 was discovered to contain a command injection vulnerability via the component /bin/proc.cgi. |
| CVE-2022-4257 | A vulnerability was found in C-DATA Web Management System. It has been rated as critical. This issue affects some unknown processing of the file cgi-bin/jumpto.php of the component GET Parameter Handler. The manipulation of the argument hostname leads to argument injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-214631. |
| CVE-2022-42484 | An OS command injection vulnerability exists in the httpd logs/view.cgi functionality of FreshTomato 2022.5. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2022-41761 | An issue was discovered in NOKIA NFM-T R19.9. An Absolute Path Traversal vulnerability exists under /cgi-bin/R19.9/viewlog.pl of the VM Manager WebUI via the logfile parameter, allowing a remote authenticated attacker to read arbitrary files. |
| CVE-2022-41525 | TOTOLINK NR1800X V9.1.0u.6279_B20210910 was discovered to contain a command injection vulnerability via the OpModeCfg function at /cgi-bin/cstecgi.cgi. |
| CVE-2022-41518 | TOTOLINK NR1800X V9.1.0u.6279_B20210910 was discovered to contain a command injection vulnerability via the UploadFirmwareFile function at /cgi-bin/cstecgi.cgi. |
| CVE-2022-41412 | An issue in the graphData.cgi component of perfSONAR v4.4.5 and prior allows attackers to access sensitive data and execute Server-Side Request Forgery (SSRF) attacks. |
| CVE-2022-40969 | An os command injection vulnerability exists in the httpd delfile.cgi functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2022-40946 | On D-Link DIR-819 Firmware Version 1.06 Hardware Version A1 devices, it is possible to trigger a Denial of Service via the sys_token parameter in a cgi-bin/webproc?getpage=html/index.html request. |
| CVE-2022-40712 | An issue was discovered in NOKIA 1350OMS R14.2. Reflected XSS exists under different /cgi-bin/R14.2* endpoints. |
| CVE-2022-40701 | A directory traversal vulnerability exists in the httpd delfile.cgi functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted HTTP request can lead to arbitrary file deletion. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2022-40603 | A cross-site scripting (XSS) vulnerability in the CGI program of Zyxel ZyWALL/USG series firmware versions 4.30 through 4.72, VPN series firmware versions 4.30 through 5.31, USG FLEX series firmware versions 4.50 through 5.31, and ATP series firmware versions 4.32 through 5.31, which could allow an attacker to trick a user into visiting a crafted URL with the XSS payload. Then, the attacker could gain access to some browser-based information if the malicious script is executed on the victim’s browser. |
| CVE-2022-40475 | TOTOLINK A860R V4.1.2cu.5182_B20201027 was discovered to contain a command injection via the component /cgi-bin/downloadFile.cgi. |
| CVE-2022-40220 | An OS command injection vulnerability exists in the httpd txt/restore.cgi functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network request can lead to arbitrary command execution. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2022-39822 | In NOKIA NFM-T R19.9, a SQL Injection vulnerability occurs in /cgi-bin/R19.9/easy1350.pl of the VM Manager WebUI via the id or host HTTP GET parameter. An authenticated attacker is required for exploitation. |
| CVE-2022-39818 | In NOKIA NFM-T R19.9, an OS Command Injection vulnerability occurs in /cgi-bin/R19.9/log.pl of the VM Manager WebUI via the cmd HTTP GET parameter. This allows authenticated users to execute commands, with root privileges, on the operating system. |
| CVE-2022-39045 | A file write vulnerability exists in the httpd upload.cgi functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted HTTP request can lead to arbitrary file upload. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2022-38840 | cgi-bin/xmlstatus.cgi in Güralp MAN-EAM-0003 3.2.4 is vulnerable to an XML External Entity (XXE) issue via XML file upload, which leads to local file disclosure. |
| CVE-2022-38828 | TOTOLINK T6 V4.1.5cu.709_B20210518 is vulnerable to command injection via cstecgi.cgi |
| CVE-2022-38827 | TOTOLINK T6 V4.1.5cu.709_B20210518 is vulnerable to Buffer Overflow via cstecgi.cgi |
| CVE-2022-38826 | In TOTOLINK T6 V4.1.5cu.709_B20210518, there is an execute arbitrary command in cstecgi.cgi. |
| CVE-2022-38715 | A leftover debug code vulnerability exists in the httpd shell.cgi functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted HTTP request can lead to remote code execution. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2022-38511 | TOTOLINK A810R V5.9c.4050_B20190424 was discovered to contain a command injection vulnerability via the component downloadFile.cgi. |
| CVE-2022-38459 | A stack-based buffer overflow vulnerability exists in the httpd downfile.cgi functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted HTTP request can lead to remote code execution. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2022-38451 | A directory traversal vulnerability exists in the httpd update.cgi functionality of FreshTomato 2022.5. A specially crafted HTTP request can lead to arbitrary file read. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2022-3844 | A vulnerability, which was classified as problematic, was found in Webmin 2.001. Affected is an unknown function of the file xterm/index.cgi. The manipulation leads to basic cross site scripting. It is possible to launch the attack remotely. Upgrading to version 2.003 is able to address this issue. The patch is identified as d3d33af3c0c3fd3a889c84e287a038b7a457d811. It is recommended to upgrade the affected component. VDB-212862 is the identifier assigned to this vulnerability. |
| CVE-2022-38400 | Mailform Pro CGI 4.3.1 and earlier allow a remote unauthenticated attacker to obtain the user input data by having a use of the product to access a specially crafted URL. |
| CVE-2022-38088 | A directory traversal vulnerability exists in the httpd downfile.cgi functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted HTTP request can lead to arbitrary file read. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2022-37843 | In TOTOLINK A860R V4.1.2cu.5182_B20201027 in cstecgi.cgi, the acquired parameters are directly put into the system for execution without filtering, resulting in a command injection vulnerability. |
| CVE-2022-37842 | In TOTOLINK A860R V4.1.2cu.5182_B20201027, the parameters in infostat.cgi are not filtered, causing a buffer overflow vulnerability. |
| CVE-2022-37840 | In TOTOLINK A860R V4.1.2cu.5182_B20201027, the main function in downloadfile.cgi has a buffer overflow vulnerability. |
| CVE-2022-37839 | TOTOLINK A860R V4.1.2cu.5182_B20201027 is vulnerable to Buffer Overflow via Cstecgi.cgi. |
| CVE-2022-37681 | Hitachi Kokusai Electric Newtork products for monitoring system (Camera, Decoder and Encoder) and below allows attckers to perform a directory traversal via a crafted GET request to the endpoint /ptippage.cgi. Security information ID hitachi-sec-2022-001 contains fixes for the issue. |
| CVE-2022-37680 | An improper authentication for critical function issue in Hitachi Kokusai Electric Network products for monitoring system (Camera, Decoder and Encoder) and bellow allows attckers to remotely reboot the device via a crafted POST request to the endpoint /ptipupgrade.cgi. Security information ID hitachi-sec-2022-001 contains fixes for the issue. |
| CVE-2022-37149 | WAVLINK WL-WN575A3 RPT75A3.V4300.201217 was discovered to contain a command injection vulnerability when operating the file adm.cgi. This vulnerability allows attackers to execute arbitrary commands via the username parameter. |
| CVE-2022-37134 | D-link DIR-816 A2_v1.10CNB04.img is vulnerable to Buffer Overflow via /goform/form2Wan.cgi. When wantype is 3, l2tp_usrname will be decrypted by base64, and the result will be stored in v94, which does not check the size of l2tp_usrname, resulting in stack overflow. |
| CVE-2022-37123 | D-link DIR-816 A2_v1.10CNB04.img is vulnerable to Command injection via /goform/form2userconfig.cgi. |
| CVE-2022-37122 | Carel pCOWeb HVAC BACnet Gateway 2.1.0, Firmware: A2.1.0 - B2.1.0, Application Software: 2.15.4A Software v16 13020200 suffers from an unauthenticated arbitrary file disclosure vulnerability. Input passed through the 'file' GET parameter through the 'logdownload.cgi' Bash script is not properly verified before being used to download log files. This can be exploited to disclose the contents of arbitrary and sensitive files via directory traversal attacks. |
| CVE-2022-36588 | In D-Link DAP1650 v1.04 firmware, the fileaccess.cgi program in the firmware has a buffer overflow vulnerability caused by strncpy. |
| CVE-2022-36559 | Seiko SkyBridge MB-A200 v01.00.04 and below was discovered to contain a command injection vulnerability via the Ping parameter at ping_exec.cgi. |
| CVE-2022-36553 | Hytec Inter HWL-2511-SS v1.05 and below was discovered to contain a command injection vulnerability via the component /www/cgi-bin/popen.cgi. |
| CVE-2022-36552 | Tenda AC6(AC1200) v5.0 Firmware v02.03.01.114 and below contains an issue in the component /cgi-bin/DownloadFlash which allows attackers to steal all data such as source code and system files via a crafted GET request. |
| CVE-2022-36456 | TOTOLink A720R V4.1.5cu.532_B20210610 was discovered to contain a command injection vulnerability via the username parameter in /cstecgi.cgi. |
| CVE-2022-36455 | TOTOLink A3600R V4.1.2cu.5182_B20201102 was discovered to contain a command injection vulnerability via the username parameter in /cstecgi.cgi. |
| CVE-2022-36309 | Airspan AirVelocity 1500 software versions prior to 15.18.00.2511 have a root command injection vulnerability in the ActiveBank parameter of the recoverySubmit.cgi script running on the eNodeB's web management UI. This issue may affect other AirVelocity and AirSpeed models. |
| CVE-2022-36279 | A stack-based buffer overflow vulnerability exists in the httpd delfile.cgi functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted HTTP request can lead to remote code execution. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2022-36267 | In Airspan AirSpot 5410 version 0.3.4.1-4 and under there exists a Unauthenticated remote command injection vulnerability. The ping functionality can be called without user authentication when crafting a malicious http request by injecting code in one of the parameters allowing for remote code execution. This vulnerability is exploited via the binary file /home/www/cgi-bin/diagnostics.cgi that accepts unauthenticated requests and unsanitized data. As a result, a malicious actor can craft a specific request and interact remotely with the device. |
| CVE-2022-36266 | In Airspan AirSpot 5410 version 0.3.4.1-4 and under there exists a stored XSS vulnerability. As the binary file /home/www/cgi-bin/login.cgi does not check if the user is authenticated, a malicious actor can craft a specific request on the login.cgi endpoint that contains a base32 encoded XSS payload that will be accepted and stored. A successful attack will results in the injection of malicious scripts into the user settings page. |
| CVE-2022-36158 | Contec FXA3200 version 1.13.00 and under suffers from Insecure Permissions in the Wireless LAN Manager interface which allows malicious actors to execute Linux commands with root privilege via a hidden web page (/usr/www/ja/mnt_cmd.cgi). |
| CVE-2022-35538 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 wireless.cgi has no filtering on parameters: delete_list, delete_al_mac, b_delete_list and b_delete_al_mac, which leads to command injection in page /wifi_mesh.shtml. |
| CVE-2022-35537 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 wireless.cgi has no filtering on parameters: mac_5g and Newname, which leads to command injection in page /wifi_mesh.shtml. |
| CVE-2022-35536 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 qos.cgi has no filtering on parameters: qos_bandwith and qos_dat, which leads to command injection in page /qos.shtml. |
| CVE-2022-35535 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 wireless.cgi has no filtering on parameter macAddr, which leads to command injection in page /wifi_mesh.shtml. |
| CVE-2022-35534 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 wireless.cgi has no filtering on parameter hiddenSSID32g and SSID2G2, which leads to command injection in page /wifi_multi_ssid.shtml. |
| CVE-2022-35533 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 qos.cgi has no filtering on parameters: cli_list and cli_num, which leads to command injection in page /qos.shtml. |
| CVE-2022-35526 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 login.cgi has no filtering on parameter key, which leads to command injection in page /login.shtml. |
| CVE-2022-35525 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 adm.cgi has no filtering on parameter led_switch, which leads to command injection in page /ledonoff.shtml. |
| CVE-2022-35524 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 adm.cgi has no filtering on parameters: wlan_signal, web_pskValue, sel_EncrypTyp, sel_Automode, wlan_bssid, wlan_ssid and wlan_channel, which leads to command injection in page /wizard_rep.shtml. |
| CVE-2022-35523 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 firewall.cgi has no filtering on parameter del_mac and parameter flag, which leads to command injection in page /cli_black_list.shtml. |
| CVE-2022-35522 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 adm.cgi has no filtering on parameters: ppp_username, ppp_passwd, rwan_gateway, rwan_mask and rwan_ip, which leads to command injection in page /wan.shtml. |
| CVE-2022-35521 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 firewall.cgi has no filtering on parameters: remoteManagementEnabled, blockPortScanEnabled, pingFrmWANFilterEnabled and blockSynFloodEnabled, which leads to command injection in page /man_security.shtml. |
| CVE-2022-35520 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 api.cgi has no filtering on parameter ufconf, and this is a hidden parameter which doesn't appear in POST body, but exist in cgi binary. This leads to command injection in page /ledonoff.shtml. |
| CVE-2022-35519 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 firewall.cgi has no filtering on parameter add_mac, which leads to command injection in page /cli_black_list.shtml. |
| CVE-2022-35518 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 nas.cgi has no filtering on parameters: User1Passwd and User1, which leads to command injection in page /nas_disk.shtml. |
| CVE-2022-35517 | WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 adm.cgi has no filtering on parameters: web_pskValue, wl_Method, wlan_ssid, EncrypType, rwan_ip, rwan_mask, rwan_gateway, ppp_username, ppp_passwd and ppp_setver, which leads to command injection in page /wizard_router_mesh.shtml. |
| CVE-2022-35401 | An authentication bypass vulnerability exists in the get_IFTTTTtoken.cgi functionality of Asus RT-AX82U 3.0.0.4.386_49674-ge182230. A specially-crafted HTTP request can lead to full administrative access to the device. An attacker would need to send a series of HTTP requests to exploit this vulnerability. |
| CVE-2022-34767 | Web page which "wizardpwd.asp" ALLNET Router model WR0500AC is prone to Authorization bypass vulnerability – the password, located at "admin" allows changing the http[s]://wizardpwd.asp/cgi-bin. Does not validate the user's identity and can be accessed publicly. |
| CVE-2022-34577 | A vulnerability in adm.cgi of WAVLINK WN535 G3 M35G3R.V5030.180927 allows attackers to execute arbitrary code via a crafted POST request. |
| CVE-2022-34576 | A vulnerability in /cgi-bin/ExportAllSettings.sh of WAVLINK WN535 G3 M35G3R.V5030.180927 allows attackers to execute arbitrary code via a crafted POST request. |
| CVE-2022-34540 | Digital Watchdog DW MEGApix IP cameras A7.2.2_20211029 was discovered to contain a command injection vulnerability in the component /admin/vca/license/license_tok.cgi. This vulnerability is exploitable via a crafted POST request. |
| CVE-2022-34539 | Digital Watchdog DW MEGApix IP cameras A7.2.2_20211029 was discovered to contain a command injection vulnerability in the component /admin/curltest.cgi. This vulnerability is exploitable via a crafted POST request. |
| CVE-2022-34538 | Digital Watchdog DW MEGApix IP cameras A7.2.2_20211029 was discovered to contain a command injection vulnerability in the component /admin/vca/bia/addacph.cgi. This vulnerability is exploitable via a crafted POST request. |
| CVE-2022-34537 | Digital Watchdog DW MEGApix IP cameras A7.2.2_20211029 was discovered to contain a cross-site scripting (XSS) vulnerability via the component bia_oneshot.cgi. |
| CVE-2022-34323 | Multiple XSS issues were discovered in Sage XRT Business Exchange 12.4.302 that allow an attacker to execute JavaScript code in the context of other users' browsers. The attacker needs to be authenticated to reach the vulnerable features. An issue is present in the Filters and Display model features (OnlineBanking > Web Monitoring > Settings > Filters / Display models). The name of a filter or a display model is interpreted as HTML and can thus embed JavaScript code, which is executed when displayed. This is a stored XSS. Another issue is present in the Notification feature (OnlineBanking > Configuration > Notifications and alerts > Alerts *). The name of an alert is interpreted as HTML, and can thus embed JavaScript code, which is executed when displayed. This is a stored XSS. (Also, an issue is present in the File download feature, accessible via /OnlineBanking/cgi/isapi.dll/DOWNLOADFRS. When requesting to show the list of downloadable files, the contents of three form fields are embedded in the JavaScript code without prior sanitization. This is essentially a self-XSS.) |
| CVE-2022-34045 | Wavlink WN530HG4 M30HG4.V5030.191116 was discovered to contain a hardcoded encryption/decryption key for its configuration files at /etc_ro/lighttpd/www/cgi-bin/ExportAllSettings.sh. |
| CVE-2022-33175 | Power Distribution Units running on Powertek firmware (multiple brands) before 3.30.30 have an insecure permissions setting on the user.token field that is accessible to everyone through the /cgi/get_param.cgi HTTP API. This leads to disclosing active session ids of currently logged-in administrators. The session id can then be reused to act as the administrator, allowing reading of the cleartext password, or reconfiguring the device. |
| CVE-2022-33174 | Power Distribution Units running on Powertek firmware (multiple brands) before 3.30.30 allows remote authorization bypass in the web interface. To exploit the vulnerability, an attacker must send an HTTP packet to the data retrieval interface (/cgi/get_param.cgi) with the tmpToken cookie set to an empty string followed by a semicolon. This bypasses an active session authorization check. This can be then used to fetch the values of protected sys.passwd and sys.su.name fields that contain the username and password in cleartext. |
| CVE-2022-32993 | TOTOLINK A7000R V4.1cu.4134 was discovered to contain an access control issue via /cgi-bin/ExportSettings.sh. |
| CVE-2022-32988 | Cross Site Scripting (XSS) vulnerability in router Asus DSL-N14U-B1 1.1.2.3_805 via the "*list" parameters (e.g. filter_lwlist, keyword_rulelist, etc) in every ".asp" page containing a list of stored strings. The following asp files are affected: (1) cgi-bin/APP_Installation.asp, (2) cgi-bin/Advanced_ACL_Content.asp, (3) cgi-bin/Advanced_ADSL_Content.asp, (4) cgi-bin/Advanced_ASUSDDNS_Content.asp, (5) cgi-bin/Advanced_AiDisk_ftp.asp, (6) cgi-bin/Advanced_AiDisk_samba.asp, (7) cgi-bin/Advanced_DSL_Content.asp, (8) cgi-bin/Advanced_Firewall_Content.asp, (9) cgi-bin/Advanced_FirmwareUpgrade_Content.asp, (10) cgi-bin/Advanced_GWStaticRoute_Content.asp, (11) cgi-bin/Advanced_IPTV_Content.asp, (12) cgi-bin/Advanced_IPv6_Content.asp, (13) cgi-bin/Advanced_KeywordFilter_Content.asp, (14) cgi-bin/Advanced_LAN_Content.asp, (15) cgi-bin/Advanced_Modem_Content.asp, (16) cgi-bin/Advanced_PortTrigger_Content.asp, (17) cgi-bin/Advanced_QOSUserPrio_Content.asp, (18) cgi-bin/Advanced_QOSUserRules_Content.asp, (19) cgi-bin/Advanced_SettingBackup_Content.asp, (20) cgi-bin/Advanced_System_Content.asp, (21) cgi-bin/Advanced_URLFilter_Content.asp, (22) cgi-bin/Advanced_VPN_PPTP.asp, (23) cgi-bin/Advanced_VirtualServer_Content.asp, (24) cgi-bin/Advanced_WANPort_Content.asp, (25) cgi-bin/Advanced_WAdvanced_Content.asp, (26) cgi-bin/Advanced_WMode_Content.asp, (27) cgi-bin/Advanced_WWPS_Content.asp, (28) cgi-bin/Advanced_Wireless_Content.asp, (29) cgi-bin/Bandwidth_Limiter.asp, (30) cgi-bin/Guest_network.asp, (31) cgi-bin/Main_AccessLog_Content.asp, (32) cgi-bin/Main_AdslStatus_Content.asp, (33) cgi-bin/Main_Spectrum_Content.asp, (34) cgi-bin/Main_WebHistory_Content.asp, (35) cgi-bin/ParentalControl.asp, (36) cgi-bin/QIS_wizard.asp, (37) cgi-bin/QoS_EZQoS.asp, (38) cgi-bin/aidisk.asp, (39) cgi-bin/aidisk/Aidisk-1.asp, (40) cgi-bin/aidisk/Aidisk-2.asp, (41) cgi-bin/aidisk/Aidisk-3.asp, (42) cgi-bin/aidisk/Aidisk-4.asp, (43) cgi-bin/blocking.asp, (44) cgi-bin/cloud_main.asp, (45) cgi-bin/cloud_router_sync.asp, (46) cgi-bin/cloud_settings.asp, (47) cgi-bin/cloud_sync.asp, (48) cgi-bin/device-map/DSL_dashboard.asp, (49) cgi-bin/device-map/clients.asp, (50) cgi-bin/device-map/disk.asp, (51) cgi-bin/device-map/internet.asp, (52) cgi-bin/error_page.asp, (53) cgi-bin/index.asp, (54) cgi-bin/index2.asp, (55) cgi-bin/qis/QIS_PTM_manual_setting.asp, (56) cgi-bin/qis/QIS_admin_pass.asp, (57) cgi-bin/qis/QIS_annex_setting.asp, (58) cgi-bin/qis/QIS_bridge_cfg_tmp.asp, (59) cgi-bin/qis/QIS_detect.asp, (60) cgi-bin/qis/QIS_finish.asp, (61) cgi-bin/qis/QIS_ipoa_cfg_tmp.asp, (62) cgi-bin/qis/QIS_manual_setting.asp, (63) cgi-bin/qis/QIS_mer_cfg.asp, (64) cgi-bin/qis/QIS_mer_cfg_tmp.asp, (65) cgi-bin/qis/QIS_ppp_cfg.asp, (66) cgi-bin/qis/QIS_ppp_cfg_tmp.asp, (67) cgi-bin/qis/QIS_wireless.asp, (68) cgi-bin/query_wan_status.asp, (69) cgi-bin/query_wan_status2.asp, and (70) cgi-bin/start_apply.asp. |
| CVE-2022-32548 | An issue was discovered on certain DrayTek Vigor routers before July 2022 such as the Vigor3910 before 4.3.1.1. /cgi-bin/wlogin.cgi has a buffer overflow via the username or password to the aa or ab field. |
| CVE-2022-32429 | An authentication-bypass issue in the component http://MYDEVICEIP/cgi-bin-sdb/ExportSettings.sh of Mega System Technologies Inc MSNSwitch MNT.2408 allows unauthenticated attackers to arbitrarily configure settings within the application, leading to remote code execution. |
| CVE-2022-31875 | Trendnet IP-110wn camera fw_tv-ip110wn_v2(1.2.2.68) has an xss vulnerability via the proname parameter in /admin/scheprofile.cgi |
| CVE-2022-31874 | ASUS RT-N53 3.0.0.4.376.3754 has a command injection vulnerability in the SystemCmd parameter of the apply.cgi interface. |
| CVE-2022-31873 | Trendnet IP-110wn camera fw_tv-ip110wn_v2(1.2.2.68) has an XSS vulnerability via the prefix parameter in /admin/general.cgi. |
| CVE-2022-31847 | A vulnerability in /cgi-bin/ExportAllSettings.sh of WAVLINK WN579 X3 M79X3.V5030.180719 allows attackers to obtain sensitive router information via a crafted POST request. |
| CVE-2022-31414 | D-Link DIR-1960 firmware DIR-1960_A1_1.11 was discovered to contain a buffer overflow via srtcat in prog.cgi. This vulnerability allowed attackers to cause a Denial of Service (DoS) via a crafted HTTP request. |
| CVE-2022-31311 | An issue in adm.cgi of WAVLINK AERIAL X 1200M M79X3.V5030.180719 allows attackers to execute arbitrary commands via a crafted POST request. |
| CVE-2022-31210 | An issue was discovered in Infiray IRAY-A8Z3 1.0.957. The binary file /usr/local/sbin/webproject/set_param.cgi contains hardcoded credentials to the web application. Because these accounts cannot be deactivated or have their passwords changed, they are considered to be backdoor accounts. |
| CVE-2022-30708 | Webmin through 1.991, when the Authentic theme is used, allows remote code execution when a user has been manually created (i.e., not created in Virtualmin or Cloudmin). This occurs because settings-editor_write.cgi does not properly restrict the file parameter. |
| CVE-2022-30621 | Allows a remote user to read files on the camera's OS "GetFileContent.cgi". Reading arbitrary files on the camera's OS as root user. |
| CVE-2022-30525 | A OS command injection vulnerability in the CGI program of Zyxel USG FLEX 100(W) firmware versions 5.00 through 5.21 Patch 1, USG FLEX 200 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 500 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 700 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 50(W) firmware versions 5.10 through 5.21 Patch 1, USG20(W)-VPN firmware versions 5.10 through 5.21 Patch 1, ATP series firmware versions 5.10 through 5.21 Patch 1, VPN series firmware versions 4.60 through 5.21 Patch 1, which could allow an attacker to modify specific files and then execute some OS commands on a vulnerable device. |
| CVE-2022-30489 | WAVLINK WN535 G3 was discovered to contain a cross-site scripting (XSS) vulnerability via the hostname parameter at /cgi-bin/login.cgi. |
| CVE-2022-30078 | NETGEAR R6200_V2 firmware versions through R6200v2-V1.0.3.12_10.1.11 and R6300_V2 firmware versions through R6300v2-V1.0.4.52_10.0.93 allow remote authenticated attackers to execute arbitrary command via shell metacharacters in the ipv6_fix.cgi ipv6_wan_ipaddr, ipv6_lan_ipaddr, ipv6_wan_length, or ipv6_lan_length parameters. |
| CVE-2022-29888 | A leftover debug code vulnerability exists in the httpd port 4444 upload.cgi functionality of InHand Networks InRouter302 V3.5.45. A specially-crafted HTTP request can lead to arbitrary file deletion. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2022-29842 | Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability that could allow an attacker to execute code in the context of the root user on a vulnerable CGI file was discovered in Western Digital My Cloud OS 5 devicesThis issue affects My Cloud OS 5: before 5.26.119. |
| CVE-2022-29644 | TOTOLINK A3100R V4.1.2cu.5050_B20200504 and V4.1.2cu.5247_B20211129 were discovered to contain a hard coded password for the telnet service stored in the component /web_cste/cgi-bin/product.ini. |
| CVE-2022-29593 | relay_cgi.cgi on Dingtian DT-R002 2CH relay devices with firmware 3.1.276A allows an attacker to replay HTTP post requests without the need for authentication or a valid signed/authorized request. |
| CVE-2022-29383 | NETGEAR ProSafe SSL VPN firmware FVS336Gv2 and FVS336Gv3 was discovered to contain a SQL injection vulnerability via USERDBDomains.Domainname at cgi-bin/platform.cgi. |
| CVE-2022-29377 | Totolink A3600R V4.1.2cu.5182_B20201102 was discovered to contain a stacker overflow in the fread function at infostat.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via the parameter CONTENT_LENGTH. |
| CVE-2022-27947 | NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the ipv6_fix.cgi ipv6_wan_ipaddr, ipv6_lan_ipaddr, ipv6_wan_length, or ipv6_lan_length parameter. |
| CVE-2022-27946 | NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the sysNewPasswd and sysConfirmPasswd parameters to admin_account.cgi. |
| CVE-2022-27945 | NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the sysNewPasswd and sysConfirmPasswd parameters to password.cgi. |
| CVE-2022-27645 | This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R6700v3 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within readycloud_control.cgi. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15762. |
| CVE-2022-27615 | Improper limitation of a pathname to a restricted directory ('Path Traversal') vulnerability in cgi component in Synology DNS Server before 2.2.2-5027 allows remote authenticated users to delete arbitrary files via unspecified vectors. |
| CVE-2022-27612 | Buffer copy without checking size of input ('Classic Buffer Overflow') vulnerability in cgi component in Synology Audio Station before 6.5.4-3367 allows remote attackers to execute arbitrary commands via unspecified vectors. |
| CVE-2022-27280 | InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a stored cross-site scripting (XSS) vulnerability via the web_exec parameter at /apply.cgi. |
| CVE-2022-27268 | InHand Networks InRouter 900 Industrial 4G Router before v1.0.0.r11700 was discovered to contain a remote code execution (RCE) vulnerability via the component get_cgi_from_memory. This vulnerability is triggered via a crafted packet. |
| CVE-2022-27083 | Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /cgi-bin/uploadAccessCodePic. |
| CVE-2022-27077 | Tenda M3 1.10 V1.0.0.12(4856) was discovered to contain a command injection vulnerability via the component /cgi-bin/uploadWeiXinPic. |
| CVE-2022-26972 | Barco Control Room Management Suite web application, which is part of TransForm N before 3.14, is exposing a URL /cgi-bin endpoint. The URL parameters are not correctly sanitized, leading to reflected XSS. |
| CVE-2022-26484 | An issue was discovered in Veritas InfoScale Operations Manager (VIOM) before 7.4.2 Patch 600 and 8.x before 8.0.0 Patch 100. The web server fails to sanitize admin/cgi-bin/rulemgr.pl/getfile/ input data, allowing a remote authenticated administrator to read arbitrary files on the system via Directory Traversal. By manipulating the resource name in GET requests referring to files with absolute paths, it is possible to access arbitrary files stored on the filesystem, including application source code, configuration files, and critical system files. |
| CVE-2022-26483 | An issue was discovered in Veritas InfoScale Operations Manager (VIOM) before 7.4.2 Patch 600 and 8.x before 8.0.0 Patch 100. A reflected cross-site scripting (XSS) vulnerability in admin/cgi-bin/listdir.pl allows authenticated remote administrators to inject arbitrary web script or HTML into an HTTP GET parameter (which reflect the user input without sanitization). |
| CVE-2022-26413 | A command injection vulnerability in the CGI program of Zyxel VMG3312-T20A firmware version 5.30(ABFX.5)C0 could allow a local authenticated attacker to execute arbitrary OS commands on a vulnerable device via a LAN interface. |
| CVE-2022-26186 | TOTOLINK N600R V4.3.0cu.7570_B20200620 was discovered to contain a command injection vulnerability via the exportOvpn interface at cstecgi.cgi. |
| CVE-2022-25371 | Apache OFBiz uses the Birt project plugin (https://eclipse.github.io/birt-website/) to create data visualizations and reports. By leveraging a bug in Birt (https://bugs.eclipse.org/bugs/show_bug.cgi?id=538142) it is possible to perform a remote code execution (RCE) attack in Apache OFBiz, release 18.12.05 and earlier. |
| CVE-2022-25370 | Apache OFBiz uses the Birt plugin (https://eclipse.github.io/birt-website/) to create data visualizations and reports. In Apache OFBiz release 18.12.05, and earlier versions, by leveraging a vulnerability in Birt (https://bugs.eclipse.org/bugs/show_bug.cgi?id=538142), an unauthenticated malicious user could perform a stored XSS attack in order to inject a malicious payload and execute it using the stored XSS. |
| CVE-2022-25344 | An XSS issue was discovered on Olivetti d-COLOR MF3555 2XD_S000.002.271 devices. The Web Application doesn't properly check parameters, sent in a /dvcset/sysset/set.cgi POST request via the arg01.Hostname field, before saving them on the server. In addition, the JavaScript malicious content is then reflected back to the end user and executed by the web browser. |
| CVE-2022-25343 | An issue was discovered on Olivetti d-COLOR MF3555 2XD_S000.002.271 devices. The Web Application is affected by Denial of Service. An unauthenticated attacker, who can send POST requests to the /download/set.cgi page by manipulating the failhtmfile variable, is able to cause interruption of the service provided by the Web Application. |
| CVE-2022-2488 | A vulnerability was found in WAVLINK WN535K2 and WN535K3 and classified as critical. This issue affects some unknown processing of the file /cgi-bin/touchlist_sync.cgi. The manipulation of the argument IP leads to os command injection. The exploit has been disclosed to the public and may be used. |
| CVE-2022-2487 | A vulnerability has been found in WAVLINK WN535K2 and WN535K3 and classified as critical. This vulnerability affects unknown code of the file /cgi-bin/nightled.cgi. The manipulation of the argument start_hour leads to os command injection. The exploit has been disclosed to the public and may be used. |
| CVE-2022-2486 | A vulnerability, which was classified as critical, was found in WAVLINK WN535K2 and WN535K3. This affects an unknown part of the file /cgi-bin/mesh.cgi?page=upgrade. The manipulation of the argument key leads to os command injection. The exploit has been disclosed to the public and may be used. |
| CVE-2022-24177 | A cross-site scripting (XSS) vulnerability in the component cgi-bin/ej.cgi of Ex libris ALEPH 500 v18.1 and v20 allows attackers to execute arbitrary web scripts or HTML. |
| CVE-2022-23900 | A command injection vulnerability in the API of the Wavlink WL-WN531P3 router, version M31G3.V5030.201204, allows an attacker to achieve unauthorized remote code execution via a malicious POST request through /cgi-bin/adm.cgi. |
| CVE-2022-22683 | Buffer copy without checking size of input ('Classic Buffer Overflow') vulnerability in cgi component in Synology Media Server before 1.8.1-2876 allows remote attackers to execute arbitrary code via unspecified vectors. |
| CVE-2022-21809 | A file write vulnerability exists in the httpd upload.cgi functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted HTTP request can lead to arbitrary file upload. An attacker can upload a malicious file to trigger this vulnerability. |
| CVE-2022-2030 | A directory traversal vulnerability caused by specific character sequences within an improperly sanitized URL was identified in some CGI programs of Zyxel USG FLEX 100(W) firmware versions 4.50 through 5.30, USG FLEX 200 firmware versions 4.50 through 5.30, USG FLEX 500 firmware versions 4.50 through 5.30, USG FLEX 700 firmware versions 4.50 through 5.30, USG FLEX 50(W) firmware versions 4.16 through 5.30, USG20(W)-VPN firmware versions 4.16 through 5.30, ATP series firmware versions 4.32 through 5.30, VPN series firmware versions 4.30 through 5.30, USG/ZyWALL series firmware versions 4.11 through 4.72, that could allow an authenticated attacker to access some restricted files on a vulnerable device. |
| CVE-2022-1669 | A buffer overflow vulnerability has been detected in the firewall function of the device management web portal. The device runs a CGI binary (index.cgi) to offer a management web application. Once authenticated with valid credentials in this web portal, a potential attacker could submit any "Address" value and it would be copied to a second variable with a "strcpy" vulnerable function without checking its length. Because of this, it is possible to send a long address value to overflow the process stack, controlling the function return address. |
| CVE-2022-1077 | A vulnerability was found in TEM FLEX-1080 and FLEX-1085 1.6.0. It has been declared as problematic. This vulnerability log.cgi of the component Log Handler. A direct request leads to information disclosure of hardware information. The attack can be initiated remotely and does not require any form of authentication. |
| CVE-2022-0910 | A downgrade from two-factor authentication to one-factor authentication vulnerability in the CGI program of Zyxel USG/ZyWALL series firmware versions 4.32 through 4.71, USG FLEX series firmware versions 4.50 through 5.21, ATP series firmware versions 4.32 through 5.21, and VPN series firmware versions 4.32 through 5.21, that could allow an authenticated attacker to bypass the second authentication phase to connect the IPsec VPN server even though the two-factor authentication (2FA) was enabled. |
| CVE-2022-0734 | A cross-site scripting vulnerability was identified in the CGI program of Zyxel USG/ZyWALL series firmware versions 4.35 through 4.70, USG FLEX series firmware versions 4.50 through 5.20, ATP series firmware versions 4.35 through 5.20, and VPN series firmware versions 4.35 through 5.20, that could allow an attacker to obtain some information stored in the user's browser, such as cookies or session tokens, via a malicious script. |
| CVE-2022-0342 | An authentication bypass vulnerability in the CGI program of Zyxel USG/ZyWALL series firmware versions 4.20 through 4.70, USG FLEX series firmware versions 4.50 through 5.20, ATP series firmware versions 4.32 through 5.20, VPN series firmware versions 4.30 through 5.20, and NSG series firmware versions V1.20 through V1.33 Patch 4, which could allow an attacker to bypass the web authentication and obtain administrative access of the device. |
| CVE-2021-46939 | In the Linux kernel, the following vulnerability has been resolved: tracing: Restructure trace_clock_global() to never block It was reported that a fix to the ring buffer recursion detection would cause a hung machine when performing suspend / resume testing. The following backtrace was extracted from debugging that case: Call Trace: trace_clock_global+0x91/0xa0 __rb_reserve_next+0x237/0x460 ring_buffer_lock_reserve+0x12a/0x3f0 trace_buffer_lock_reserve+0x10/0x50 __trace_graph_return+0x1f/0x80 trace_graph_return+0xb7/0xf0 ? trace_clock_global+0x91/0xa0 ftrace_return_to_handler+0x8b/0xf0 ? pv_hash+0xa0/0xa0 return_to_handler+0x15/0x30 ? ftrace_graph_caller+0xa0/0xa0 ? trace_clock_global+0x91/0xa0 ? __rb_reserve_next+0x237/0x460 ? ring_buffer_lock_reserve+0x12a/0x3f0 ? trace_event_buffer_lock_reserve+0x3c/0x120 ? trace_event_buffer_reserve+0x6b/0xc0 ? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0 ? dpm_run_callback+0x3b/0xc0 ? pm_ops_is_empty+0x50/0x50 ? platform_get_irq_byname_optional+0x90/0x90 ? trace_device_pm_callback_start+0x82/0xd0 ? dpm_run_callback+0x49/0xc0 With the following RIP: RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200 Since the fix to the recursion detection would allow a single recursion to happen while tracing, this lead to the trace_clock_global() taking a spin lock and then trying to take it again: ring_buffer_lock_reserve() { trace_clock_global() { arch_spin_lock() { queued_spin_lock_slowpath() { /* lock taken */ (something else gets traced by function graph tracer) ring_buffer_lock_reserve() { trace_clock_global() { arch_spin_lock() { queued_spin_lock_slowpath() { /* DEAD LOCK! */ Tracing should *never* block, as it can lead to strange lockups like the above. Restructure the trace_clock_global() code to instead of simply taking a lock to update the recorded "prev_time" simply use it, as two events happening on two different CPUs that calls this at the same time, really doesn't matter which one goes first. Use a trylock to grab the lock for updating the prev_time, and if it fails, simply try again the next time. If it failed to be taken, that means something else is already updating it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761 |
| CVE-2021-46418 | An unauthorized file creation vulnerability in Telesquare TLR-2855KS6 via PUT method can allow creation of CGI scripts. |
| CVE-2021-45896 | Nokia FastMile 3TG00118ABAD52 devices allow privilege escalation by an authenticated user via is_ctc_admin=1 to login_web_app.cgi and use of Import Config File. |
| CVE-2021-45757 | ASUS AC68U <=3.0.0.4.385.20852 is affected by a buffer overflow in blocking.cgi, which may cause a denial of service (DoS). |
| CVE-2021-45756 | Asus RT-AC68U <3.0.0.4.385.20633 and RT-AC5300 <3.0.0.4.384.82072 are affected by a buffer overflow in blocking_request.cgi. |
| CVE-2021-45428 | TLR-2005KSH is affected by an incorrect access control vulnerability. THe PUT method is enabled so an attacker can upload arbitrary files including HTML and CGI formats. |
| CVE-2021-45420 | ** UNSUPPORTED WHEN ASSIGNED ** Emerson Dixell XWEB-500 products are affected by arbitrary file write vulnerability in /cgi-bin/logo_extra_upload.cgi, /cgi-bin/cal_save.cgi, and /cgi-bin/lo_utils.cgi. An attacker will be able to write any file on the target system without any kind of authentication mechanism, and this can lead to denial of service and potentially remote code execution. Note: the product has not been supported since 2018 and should be removed or replaced. |
| CVE-2021-45418 | Certain Starcharge products are vulnerable to Directory Traversal via main.cgi. The affected products include: Nova 360 Cabinet <=1.3.0.0.6 - Fixed: 1.3.0.0.9 and Titan 180 Premium <=1.3.0.0.7b102 - Fixed: Beta1.3.0.1.0. |
| CVE-2021-44720 | In Ivanti Pulse Secure Pulse Connect Secure (PCS) before 9.1R12, the administrator password is stored in the HTML source code of the "Maintenance > Push Configuration > Targets > Target Name" targets.cgi screen. A read-only administrative user can escalate to a read-write administrative role. |
| CVE-2021-44543 | An XSS vulnerability was found in Privoxy which was fixed in cgi_error_no_template() by encode the template name when Privoxy is configured to servce the user-manual itself. |
| CVE-2021-44419 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetMdAlarm param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44418 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetMdState param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44417 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetAlarm param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44416 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. Disconnect param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44415 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. ModifyUser param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44414 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. DelUser param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44413 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. AddUser param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44412 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetRec param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44411 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. Search param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44410 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. UpgradePrepare param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44409 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. TestWifi param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44408 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. TestFtp param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44407 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. TestEmail param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44406 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetAutoFocus param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44405 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. StartZoomFocus param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44404 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetZoomFocus param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44403 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetPtzTattern param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44402 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetPtzSerial param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44401 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. PtzCtrl param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44400 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetPtzPatrol param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44399 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetPtzPreset param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44398 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. rtmp=stop param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44397 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. rtmp=start param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44396 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. Preview param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44395 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetMask param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44394 | Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44393 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetIsp param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44392 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetImage param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44391 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetEnc param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44390 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. Format param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44389 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetAbility param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44388 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. Login param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44387 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetPtzPreset param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44386 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetPtzPatrol param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44385 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetPtzSerial param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44384 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetPtzTattern param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44383 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetAutoUpgrade param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44382 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot.SetIrLights param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44381 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetPowerLed param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44380 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetTime param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44379 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetAutoMaint param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44378 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetEnc param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44377 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetImage param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44376 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetIsp param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44375 | Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44374 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetMask param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44373 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetAutoFocus param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44372 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetLocalLink param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44371 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetEmail param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44370 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetFtp param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44369 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetNtp param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44368 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetNetPort param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44367 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetUpnp param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44366 | Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44365 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetDevName param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44364 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetWifi param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44363 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetPush param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44362 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetCloudSchedule param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44361 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. Set3G param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44360 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetNorm param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44359 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetCrop param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44358 | A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetRec param is not object. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44357 | Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44356 | Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44355 | Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44354 | Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-44148 | GL.iNet GL-AR150 2.x before 3.x devices, configured as repeaters, allow cgi-bin/router_cgi?action=scanwifi XSS when an attacker creates an SSID with an XSS payload as the name. |
| CVE-2021-44080 | A Command Injection vulnerability in httpd web server (setup.cgi) in SerComm h500s, FW: lowi-h500s-v3.4.22 allows logged in administrators to arbitrary OS commands as root in the device via the connection_type parameter of the statussupport_diagnostic_tracing.json endpoint. |
| CVE-2021-43711 | The downloadFlile.cgi binary file in TOTOLINK EX200 V4.0.3c.7646_B20201211 has a command injection vulnerability when receiving GET parameters. The parameter name can be constructed for unauthenticated command execution. |
| CVE-2021-43332 | In GNU Mailman before 2.1.36, the CSRF token for the Cgi/admindb.py admindb page contains an encrypted version of the list admin password. This could potentially be cracked by a moderator via an offline brute-force attack. |
| CVE-2021-43331 | In GNU Mailman before 2.1.36, a crafted URL to the Cgi/options.py user options page can execute arbitrary JavaScript for XSS. |
| CVE-2021-43164 | A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the updateVersion function in /cgi-bin/luci/api/wireless. |
| CVE-2021-43163 | A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the checkNet function in /cgi-bin/luci/api/auth. |
| CVE-2021-43162 | A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the runPackDiagnose function in /cgi-bin/luci/api/diagnose. |
| CVE-2021-43161 | A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the doSwitchApi function in /cgi-bin/luci/api/switch. |
| CVE-2021-43160 | A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the switchFastDhcp function in /cgi-bin/luci/api/diagnose. |
| CVE-2021-43159 | A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the setSessionTime function in /cgi-bin/luci/api/common.. |
| CVE-2021-43118 | A Remote Command Injection vulnerability exists in DrayTek Vigor 2960 1.5.1.3, DrayTek Vigor 3900 1.5.1.3, and DrayTek Vigor 300B 1.5.1.3 via a crafted HTTP message containing malformed QUERY STRING in mainfunction.cgi, which could let a remote malicious user execute arbitrary code. |
| CVE-2021-4304 | A vulnerability was found in eprintsug ulcc-core. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file cgi/toolbox/toolbox. The manipulation of the argument password leads to command injection. The attack can be launched remotely. The patch is named 811edaae81eb044891594f00062a828f51b22cb1. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-217447. |
| CVE-2021-42911 | A Format String vulnerability exists in DrayTek Vigor 2960 <= 1.5.1.3, DrayTek Vigor 3900 <= 1.5.1.3, and DrayTek Vigor 300B <= 1.5.1.3 in the mainfunction.cgi file via a crafted HTTP message containing malformed QUERY STRING, which could let a remote malicious user execute arbitrary code. |
| CVE-2021-42783 | Missing Authentication for Critical Function vulnerability in debug_post_set.cgi of D-Link DWR-932C E1 firmware allows an unauthenticated attacker to execute administrative actions. |
| CVE-2021-42342 | An issue was discovered in GoAhead 4.x and 5.x before 5.1.5. In the file upload filter, user form variables can be passed to CGI scripts without being prefixed with the CGI prefix. This permits tunneling untrusted environment variables into vulnerable CGI scripts. |
| CVE-2021-42071 | In Visual Tools DVR VX16 4.2.28.0, an unauthenticated attacker can achieve remote command execution via shell metacharacters in the cgi-bin/slogin/login.py User-Agent HTTP header. |
| CVE-2021-42013 | It was found that the fix for CVE-2021-41773 in Apache HTTP Server 2.4.50 was insufficient. An attacker could use a path traversal attack to map URLs to files outside the directories configured by Alias-like directives. If files outside of these directories are not protected by the usual default configuration "require all denied", these requests can succeed. If CGI scripts are also enabled for these aliased pathes, this could allow for remote code execution. This issue only affects Apache 2.4.49 and Apache 2.4.50 and not earlier versions. |
| CVE-2021-41819 | CGI::Cookie.parse in Ruby through 2.6.8 mishandles security prefixes in cookie names. This also affects the CGI gem through 0.3.0 for Ruby. |
| CVE-2021-41816 | CGI.escape_html in Ruby before 2.7.5 and 3.x before 3.0.3 has an integer overflow and resultant buffer overflow via a long string on platforms (such as Windows) where size_t and long have different numbers of bytes. This also affects the CGI gem before 0.3.1 for Ruby. |
| CVE-2021-41773 | A flaw was found in a change made to path normalization in Apache HTTP Server 2.4.49. An attacker could use a path traversal attack to map URLs to files outside the directories configured by Alias-like directives. If files outside of these directories are not protected by the usual default configuration "require all denied", these requests can succeed. If CGI scripts are also enabled for these aliased pathes, this could allow for remote code execution. This issue is known to be exploited in the wild. This issue only affects Apache 2.4.49 and not earlier versions. The fix in Apache HTTP Server 2.4.50 was found to be incomplete, see CVE-2021-42013. |
| CVE-2021-41738 | ZeroShell 3.9.5 has a command injection vulnerability in /cgi-bin/kerbynet IP parameter, which may allow an authenticated attacker to execute system commands. |
| CVE-2021-41427 | Beeline Smart Box 2.0.38 is vulnerable to Cross Site Scripting (XSS) via the choose_mac parameter to setup.cgi. |
| CVE-2021-41383 | setup.cgi on NETGEAR R6020 1.0.0.48 devices allows an admin to execute arbitrary shell commands via shell metacharacters in the ntp_server field. |
| CVE-2021-40680 | There is a Directory Traversal vulnerability in Artica Proxy (4.30.000000 SP206 through SP255, and VMware appliance 4.30.000000 through SP273) via the filename parameter to /cgi-bin/main.cgi. |
| CVE-2021-40423 | A denial of service vulnerability exists in the cgiserver.cgi API command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted series of HTTP requests can lead to denial of service. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-40416 | An incorrect default permission vulnerability exists in the cgiserver.cgi cgi_check_ability functionality of reolink RLC-410W v3.0.0.136_20121102. All the Get APIs that are not included in cgi_check_ability are already executable by any logged-in users. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-40415 | An incorrect default permission vulnerability exists in the cgiserver.cgi cgi_check_ability functionality of reolink RLC-410W v3.0.0.136_20121102. In cgi_check_ability the Format API does not have a specific case, the user permission will default to 7. This will give non-administrative users the possibility to format the SD card and reboot the device. |
| CVE-2021-40414 | An incorrect default permission vulnerability exists in the cgiserver.cgi cgi_check_ability functionality of reolink RLC-410W v3.0.0.136_20121102. The SetMdAlarm API sets the movement detection parameters, giving the ability to set the sensitivity of the camera per a range of hours, and which of the camera spaces to ignore when considering movement detection. Because in cgi_check_ability the SetMdAlarm API does not have a specific case, the user permission will default to 7. This will give non-administrative users the possibility to change the movement detection parameters. |
| CVE-2021-40413 | An incorrect default permission vulnerability exists in the cgiserver.cgi cgi_check_ability functionality of reolink RLC-410W v3.0.0.136_20121102. The UpgradePrepare is the API that checks if a provided filename identifies a new version of the RLC-410W firmware. If the version is new, it would be possible, allegedly, to later on perform the Upgrade. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-40406 | A denial of service vulnerability exists in the cgiserver.cgi session creation functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to prevent users from logging in. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-40405 | A denial of service vulnerability exists in the cgiserver.cgi Upgrade API functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-40404 | An authentication bypass vulnerability exists in the cgiserver.cgi Login functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to authentication bypass. An attacker can send an HTTP request to trigger this vulnerability. |
| CVE-2021-40382 | An issue was discovered on Compro IP70 2.08_7130218, IP570 2.08_7130520, IP60, and TN540 devices. mjpegStreamer.cgi allows video screenshot access. |
| CVE-2021-40381 | An issue was discovered on Compro IP70 2.08_7130218, IP570 2.08_7130520, IP60, and TN540 devices. index_MJpeg.cgi allows video access. |
| CVE-2021-40380 | An issue was discovered on Compro IP70 2.08_7130218, IP570 2.08_7130520, IP60, and TN540 devices. cameralist.cgi and setcamera.cgi disclose credentials. |
| CVE-2021-40378 | An issue was discovered on Compro IP70 2.08_7130218, IP570 2.08_7130520, IP60, and TN540 devices. /cgi-bin/support/killps.cgi deletes all data from the device. |
| CVE-2021-4029 | A command injection vulnerability in the CGI program of the Zyxel ARMOR Z1/Z2 firmware could allow an attacker to execute arbitrary OS commands via a LAN interface. |
| CVE-2021-40284 | D-Link DSL-3782 EU v1.01:EU v1.03 is affected by a buffer overflow which can cause a denial of service. This vulnerability exists in the web interface "/cgi-bin/New_GUI/Igmp.asp". Authenticated remote attackers can trigger this vulnerability by sending a long string in parameter 'igmpsnoopEnable' via an HTTP request. |
| CVE-2021-39510 | An issue was discovered in D-Link DIR816_A1_FW101CNB04 750m11ac wireless router, The HTTP request parameter is used in the handler function of /goform/form2userconfig.cgi route, which can construct the user name string to delete the user function. This can lead to command injection through shell metacharacters. |
| CVE-2021-39509 | An issue was discovered in D-Link DIR-816 DIR-816A2_FWv1.10CNB05_R1B011D88210 The HTTP request parameter is used in the handler function of /goform/form2userconfig.cgi route, which can construct the user name string to delete the user function. This can lead to command injection through shell metacharacters. |
| CVE-2021-39245 | Hardcoded .htaccess Credentials for getlogs.cgi exist on Altus Nexto, Nexto Xpress, and Hadron Xtorm devices. This affects Nexto NX3003 1.8.11.0, Nexto NX3004 1.8.11.0, Nexto NX3005 1.8.11.0, Nexto NX3010 1.8.3.0, Nexto NX3020 1.8.3.0, Nexto NX3030 1.8.3.0, Nexto NX5100 1.8.11.0, Nexto NX5101 1.8.11.0, Nexto NX5110 1.1.2.8, Nexto NX5210 1.1.2.8, Nexto Xpress XP300 1.8.11.0, Nexto Xpress XP315 1.8.11.0, Nexto Xpress XP325 1.8.11.0, Nexto Xpress XP340 1.8.11.0, and Hadron Xtorm HX3040 1.7.58.0. |
| CVE-2021-39244 | Authenticated Semi-Blind Command Injection (via Parameter Injection) exists on Altus Nexto, Nexto Xpress, and Hadron Xtorm devices via the getlogs.cgi tcpdump feature. This affects Nexto NX3003 1.8.11.0, Nexto NX3004 1.8.11.0, Nexto NX3005 1.8.11.0, Nexto NX3010 1.8.3.0, Nexto NX3020 1.8.3.0, Nexto NX3030 1.8.3.0, Nexto NX5100 1.8.11.0, Nexto NX5101 1.8.11.0, Nexto NX5110 1.1.2.8, Nexto NX5210 1.1.2.8, Nexto Xpress XP300 1.8.11.0, Nexto Xpress XP315 1.8.11.0, Nexto Xpress XP325 1.8.11.0, Nexto Xpress XP340 1.8.11.0, and Hadron Xtorm HX3040 1.7.58.0. |
| CVE-2021-39243 | Cross-Site Request Forgery (CSRF) exists on Altus Nexto, Nexto Xpress, and Hadron Xtorm devices via any CGI endpoint. This affects Nexto NX3003 1.8.11.0, Nexto NX3004 1.8.11.0, Nexto NX3005 1.8.11.0, Nexto NX3010 1.8.3.0, Nexto NX3020 1.8.3.0, Nexto NX3030 1.8.3.0, Nexto NX5100 1.8.11.0, Nexto NX5101 1.8.11.0, Nexto NX5110 1.1.2.8, Nexto NX5210 1.1.2.8, Nexto Xpress XP300 1.8.11.0, Nexto Xpress XP315 1.8.11.0, Nexto Xpress XP325 1.8.11.0, Nexto Xpress XP340 1.8.11.0, and Hadron Xtorm HX3040 1.7.58.0. |
| CVE-2021-37388 | A buffer overflow in D-Link DIR-615 C2 3.03WW. The ping_ipaddr parameter in ping_response.cgi POST request allows an attacker to crash the webserver and might even gain remote code execution. |
| CVE-2021-36708 | In ProLink PRC2402M V1.0.18 and older, the set_sys_init function in the login.cgi binary allows an attacker to reset the password to the administrative interface of the router. |
| CVE-2021-36707 | In ProLink PRC2402M V1.0.18 and older, the set_ledonoff function in the adm.cgi binary, accessible with a page parameter value of ledonoff contains a trivial command injection where the value of the led_cmd parameter is passed directly to do_system. |
| CVE-2021-36706 | In ProLink PRC2402M V1.0.18 and older, the set_sys_cmd function in the adm.cgi binary, accessible with a page parameter value of sysCMD contains a trivial command injection where the value of the command parameter is passed directly to system. |
| CVE-2021-36705 | In ProLink PRC2402M V1.0.18 and older, the set_TR069 function in the adm.cgi binary, accessible with a page parameter value of TR069 contains a trivial command injection where the value of the TR069_local_port parameter is passed directly to system. |
| CVE-2021-36380 | Sunhillo SureLine before 8.7.0.1.1 allows Unauthenticated OS Command Injection via shell metacharacters in ipAddr or dnsAddr /cgi/networkDiag.cgi. |
| CVE-2021-36359 | OrbiTeam BSCW Classic before 7.4.3 allows exportpdf authenticated remote code execution (RCE) via XML tag injection because reportlab\platypus\paraparser.py (reached via bscw.cgi op=_editfolder.EditFolder) calls eval on attacker-supplied Python code. This is fixed in 5.0.12, 5.1.10, 5.2.4, 7.3.3, and 7.4.3. |
| CVE-2021-35489 | Thruk 2.40-2 allows /thruk/#cgi-bin/extinfo.cgi?type=2&host={HOSTNAME]&service={SERVICENAME]&backend={BACKEND] Reflected XSS via the host or service parameter. An attacker could inject arbitrary JavaScript into extinfo.cgi. The malicious payload would be triggered every time an authenticated user browses the page containing it. |
| CVE-2021-35488 | Thruk 2.40-2 allows /thruk/#cgi-bin/status.cgi?style=combined&title={TITLE] Reflected XSS via the host or title parameter. An attacker could inject arbitrary JavaScript into status.cgi. The payload would be triggered every time an authenticated user browses the page containing it. |
| CVE-2021-35034 | An insufficient session expiration vulnerability in the CGI program of the Zyxel NBG6604 firmware could allow a remote attacker to access the device if the correct token can be intercepted. |
| CVE-2021-35030 | A vulnerability was found in the CGI program in Zyxel GS1900-8 firmware version V2.60, that did not properly sterilize packet contents and could allow an authenticated, local user to perform a cross-site scripting (XSS) attack via a crafted LLDP packet. |
| CVE-2021-35028 | A command injection vulnerability in the CGI program of the Zyxel VPN2S firmware version 1.12 could allow an authenticated, local user to execute arbitrary OS commands. |
| CVE-2021-34980 | This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6260 1.1.0.78_1.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the setupwizard.cgi page. When parsing the SOAP_LOGIN_TOKEN environment variable, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-14107. |
| CVE-2021-34978 | This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6260 1.1.0.78_1.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the setupwizard.cgi page. A crafted SOAP request can trigger an overflow of a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13511. |
| CVE-2021-34810 | Improper privilege management vulnerability in cgi component in Synology Download Station before 3.8.16-3566 allows remote authenticated users to execute arbitrary code via unspecified vectors. |
| CVE-2021-34808 | Server-Side Request Forgery (SSRF) vulnerability in cgi component in Synology Media Server before 1.8.3-2881 allows remote attackers to access intranet resources via unspecified vectors. |
| CVE-2021-34236 | Buffer Overflow in Netgear R8000 Router with firmware v1.0.4.56 allows remote attackers to execute arbitrary code or cause a denial-of-service by sending a crafted POST to '/bd_genie_create_account.cgi' with a sufficiently long parameter 'register_country'. |
| CVE-2021-33621 | The cgi gem before 0.1.0.2, 0.2.x before 0.2.2, and 0.3.x before 0.3.5 for Ruby allows HTTP response splitting. This is relevant to applications that use untrusted user input either to generate an HTTP response or to create a CGI::Cookie object. |
| CVE-2021-33514 | Certain NETGEAR devices are affected by command injection by an unauthenticated attacker via the vulnerable /sqfs/lib/libsal.so.0.0 library used by a CGI application, as demonstrated by setup.cgi?token=';$HTTP_USER_AGENT;' with an OS command in the User-Agent field. This affects GC108P before 1.0.7.3, GC108PP before 1.0.7.3, GS108Tv3 before 7.0.6.3, GS110TPPv1 before 7.0.6.3, GS110TPv3 before 7.0.6.3, GS110TUPv1 before 1.0.4.3, GS710TUPv1 before 1.0.4.3, GS716TP before 1.0.2.3, GS716TPP before 1.0.2.3, GS724TPPv1 before 2.0.4.3, GS724TPv2 before 2.0.4.3, GS728TPPv2 before 6.0.6.3, GS728TPv2 before 6.0.6.3, GS752TPPv1 before 6.0.6.3, GS752TPv2 before 6.0.6.3, MS510TXM before 1.0.2.3, and MS510TXUP before 1.0.2.3. |
| CVE-2021-3342 | EPrints 3.4.2 allows remote attackers to read arbitrary files and possibly execute commands via crafted LaTeX input to a cgi/latex2png?latex= URI. |
| CVE-2021-33180 | Improper neutralization of special elements used in an SQL command ('SQL Injection') vulnerability in cgi component in Synology Media Server before 1.8.1-2876 allows remote attackers to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2021-32586 | An improper input validation vulnerability in the web server CGI facilities of FortiMail before 7.0.1 may allow an unauthenticated attacker to alter the environment of the underlying script interpreter via specifically crafted HTTP requests. |
| CVE-2021-32062 | MapServer before 7.0.8, 7.1.x and 7.2.x before 7.2.3, 7.3.x and 7.4.x before 7.4.5, and 7.5.x and 7.6.x before 7.6.3 does not properly enforce the MS_MAP_NO_PATH and MS_MAP_PATTERN restrictions that are intended to control the locations from which a mapfile may be loaded (with MapServer CGI). |
| CVE-2021-31802 | NETGEAR R7000 1.0.11.116 devices have a heap-based Buffer Overflow that is exploitable from the local network without authentication. The vulnerability exists within the handling of an HTTP request. An attacker can leverage this to execute code as root. The problem is that a user-provided length value is trusted during a backup.cgi file upload. The attacker must add a \n before the Content-Length header. |
| CVE-2021-31655 | Cross Site Scripting (XSS) vulnerability in TRENDnet TV-IP110WN V1.2.2.64 V1.2.2.65 V1.2.2.68 via the profile parameter. in a GET request in view.cgi. |
| CVE-2021-31643 | An XSS vulnerability exists in several IoT devices from CHIYU Technology, including SEMAC, Biosense, BF-630, BF-631, and Webpass due to a lack of sanitization on the component if.cgi - username parameter. |
| CVE-2021-3149 | On Netshield NANO 25 10.2.18 devices, /usr/local/webmin/System/manual_ping.cgi allows OS command injection (after authentication by the attacker) because the system C library function is used unsafely. |
| CVE-2021-31326 | D-Link DIR-816 A2 1.10 B05 allows unauthenticated attackers to arbitrarily reset the device via a crafted tokenid parameter to /goform/form2Reboot.cgi. |
| CVE-2021-31250 | Multiple storage XSS vulnerabilities were discovered on BF-430, BF-431 and BF-450M TCP/IP Converter devices from CHIYU Technology Inc due to a lack of sanitization of the input on the components man.cgi, if.cgi, dhcpc.cgi, ppp.cgi. |
| CVE-2021-31249 | A CRLF injection vulnerability was found on BF-430, BF-431, and BF-450M TCP/IP Converter devices from CHIYU Technology Inc due to a lack of validation on the parameter redirect= available on multiple CGI components. |
| CVE-2021-30454 | An issue was discovered in the outer_cgi crate before 0.2.1 for Rust. A user-provided Read instance receives an uninitialized memory buffer from KeyValueReader. |
| CVE-2021-30072 | An issue was discovered in prog.cgi on D-Link DIR-878 1.30B08 devices. Because strcat is misused, there is a stack-based buffer overflow that does not require authentication. |
| CVE-2021-30003 | An issue was discovered on Nokia G-120W-F 3FE46606AGAB91 devices. There is Stored XSS in the administrative interface via urlfilter.cgi?add url_address. |
| CVE-2021-29592 | TensorFlow is an end-to-end open source platform for machine learning. The fix for CVE-2020-15209(https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-15209) missed the case when the target shape of `Reshape` operator is given by the elements of a 1-D tensor. As such, the fix for the vulnerability(https://github.com/tensorflow/tensorflow/blob/9c1dc920d8ffb4893d6c9d27d1f039607b326743/tensorflow/lite/core/subgraph.cc#L1062-L1074) allowed passing a null-buffer-backed tensor with a 1D shape. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range. |
| CVE-2021-29088 | Improper limitation of a pathname to a restricted directory ('Path Traversal') in cgi component in Synology DiskStation Manager (DSM) before 6.2.4-25553 allows local users to execute arbitrary code via unspecified vectors. |
| CVE-2021-28846 | A Format String vulnerablity exists in TRENDnet TEW-755AP 1.11B03, TEW-755AP2KAC 1.11B03, TEW-821DAP2KAC 1.11B03, and TEW-825DAP 1.11B03, which could let a remote malicious user cause a denial of service due to a logic bug at address 0x40dcd0 when calling fprintf with "%s: key len = %d, too long\n" format. The two variables seem to be put in the wrong order. The vulnerability could be triggered by sending the POST request to apply_cgi with a long and unknown key in the request body. |
| CVE-2021-28845 | Null Pointer Dereference vulnerability exists in TRENDnet TEW-755AP 1.11B03, TEW-755AP2KAC 1.11B03, TEW-821DAP2KAC 1.11B03, and TEW-825DAP 1.11B03, which could let a remote malicious user cause a denial of service by sending the POST request to apply_cgi via the lang action without a language key. |
| CVE-2021-28844 | Null Pointer Dereference vulnerability exists in TRENDnet TEW-755AP 1.11B03, TEW-755AP2KAC 1.11B03, TEW-821DAP2KAC 1.11B03, and TEW-825DAP 1.11B03 by sending the POST request to apply_cgi via a do_graph_auth action without a session_id key. |
| CVE-2021-28843 | Null Pointer Dereference vulnerability exists in TRENDnet TEW-755AP 1.11B03, TEW-755AP2KAC 1.11B03, TEW-821DAP2KAC 1.11B03, and TEW-825DAP 1.11B03 by sending the POST request to apply_cgi with an unknown action name. |
| CVE-2021-28842 | Null Pointer Deference vulnerability exists in TRENDnet TEW-755AP 1.11B03, TEW-755AP2KAC 1.11B03, TEW-821DAP2KAC 1.11B03, and TEW-825DAP 1.11B03, which could let a remote malicious user cause a denial os service by sending the POST request to apply_cgi via action do_graph_auth without login_name key. |
| CVE-2021-28841 | Null Pointer Dereference vulnerability in TRENDnet TEW-755AP 1.11B03, TEW-755AP2KAC 1.11B03, TEW-821DAP2KAC 1.11B03, and TEW-825DAP 1.11B03, which could let a remote malicious user cause a denial of service by sending a POST request to apply_cgi via an action ping_test without a ping_ipaddr key. |
| CVE-2021-28247 | ** UNSUPPORTED WHEN ASSIGNED ** CA eHealth Performance Manager through 6.3.2.12 is affected by Cross Site Scripting (XSS). The impact is: An authenticated remote user is able to inject arbitrary web script or HTML due to incorrect sanitization of user-supplied data and perform a Reflected Cross-Site Scripting attack against the platform users. The affected endpoints are: cgi/nhWeb with the parameter report, aviewbin/filtermibobjects.pl with the parameter namefilter, and aviewbin/query.pl with the parameters System, SystemText, Group, and GroupText. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| CVE-2021-28151 | Hongdian H8922 3.0.5 devices allow OS command injection via shell metacharacters into the ip-address (aka Destination) field to the tools.cgi ping command, which is accessible with the username guest and password guest. |
| CVE-2021-28150 | Hongdian H8922 3.0.5 devices allow the unprivileged guest user to read cli.conf (with the administrator password and other sensitive data) via /backup2.cgi. |
| CVE-2021-28149 | Hongdian H8922 3.0.5 devices allow Directory Traversal. The /log_download.cgi log export handler does not validate user input and allows a remote attacker with minimal privileges to download any file from the device by substituting ../ (e.g., ../../etc/passwd) This can be carried out with a web browser by changing the file name accordingly. Upon visiting log_download.cgi?type=../../etc/passwd and logging in, the web server will allow a download of the contents of the /etc/passwd file. |
| CVE-2021-28144 | prog.cgi on D-Link DIR-3060 devices before 1.11b04 HF2 allows remote authenticated users to inject arbitrary commands in an admin or root context because SetVirtualServerSettings calls CheckArpTables, which calls popen unsafely. |
| CVE-2021-27403 | Askey RTF8115VW BR_SV_g11.11_RTF_TEF001_V6.54_V014 devices allow cgi-bin/te_acceso_router.cgi curWebPage XSS. |
| CVE-2021-27256 | This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R7800 firmware version 1.0.2.76. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the rc_service parameter provided to apply_save.cgi. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12355. |
| CVE-2021-27254 | This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR R7800. Authentication is not required to exploit this vulnerability. The specific flaw exists within the apply_save.cgi endpoint. This issue results from the use of hard-coded encryption key. An attacker can leverage this vulnerability to execute arbitrary code in the context of root. Was ZDI-CAN-12287. |
| CVE-2021-27253 | This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR Nighthawk R7800. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the rc_service parameter provided to apply_bind.cgi. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12303. |
| CVE-2021-27250 | This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of D-Link DAP-2020 v1.01rc001 Wi-Fi access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of CGI scripts. When parsing the errorpage request parameter, the process does not properly validate a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-11856. |
| CVE-2021-27249 | This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 v1.01rc001 Wi-Fi access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of CGI scripts. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-11369. |
| CVE-2021-27248 | This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 v1.01rc001 Wi-Fi access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of CGI scripts. When parsing the getpage parameter, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-10932. |
| CVE-2021-27210 | TP-Link Archer C5v 1.7_181221 devices allows remote attackers to retrieve cleartext credentials via [USER_CFG#0,0,0,0,0,0#0,0,0,0,0,0]0,0 to the /cgi?1&5 URI. |
| CVE-2021-26777 | Buffer overflow vulnerability in function SetFirewall in index.cgi in CIRCUTOR COMPACT DC-S BASIC smart metering concentrator Firwmare version CIR_CDC_v1.2.17, allows attackers to execute arbitrary code. |
| CVE-2021-26704 | EPrints 3.4.2 allows remote attackers to execute arbitrary commands via crafted input to the verb parameter in a cgi/toolbox/toolbox URI. |
| CVE-2021-26703 | EPrints 3.4.2 allows remote attackers to read arbitrary files and possibly execute commands via crafted JSON/XML input to a cgi/ajax/phrase URI. |
| CVE-2021-26702 | EPrints 3.4.2 exposes a reflected XSS opportunity in the dataset parameter to the cgi/dataset_dictionary URI. |
| CVE-2021-26614 | ius_get.cgi in IpTime C200 camera allows remote code execution. A remote attacker may send a crafted parameters to the exposed vulnerable web service interface which invokes the arbitrary shell command. |
| CVE-2021-26476 | EPrints 3.4.2 allows remote attackers to execute OS commands via crafted LaTeX input to a cgi/cal?year= URI. |
| CVE-2021-26475 | EPrints 3.4.2 exposes a reflected XSS opportunity in the via a cgi/cal URI. |
| CVE-2021-25328 | Skyworth Digital Technology RN510 V.3.1.0.4 RN510 V.3.1.0.4 contains a buffer overflow vulnerability in /cgi-bin/app-staticIP.asp. An authenticated attacker can send a specially crafted request to endpoint which can lead to a denial of service (DoS) or possible code execution on the device. |
| CVE-2021-25327 | Skyworth Digital Technology RN510 V.3.1.0.4 contains a cross-site request forgery (CSRF) vulnerability in /cgi-bin/net-routeadd.asp and /cgi-bin/sec-urlfilter.asp. Missing CSRF protection in devices can lead to XSRF, as the above pages are vulnerable to cross-site scripting (XSS). |
| CVE-2021-25326 | Skyworth Digital Technology RN510 V.3.1.0.4 is affected by an incorrect access control vulnerability in/cgi-bin/test_version.asp. If Wi-Fi is connected but an unauthenticated user visits a URL, the SSID password and web UI password may be disclosed. |
| CVE-2021-25310 | ** UNSUPPORTED WHEN ASSIGNED ** The administration web interface on Belkin Linksys WRT160NL 1.0.04.002_US_20130619 devices allows remote authenticated attackers to execute system commands with root privileges via shell metacharacters in the ui_language POST parameter to the apply.cgi form endpoint. This occurs in do_upgrade_post in mini_httpd. NOTE: This vulnerability only affects products that are no longer supported by the maintainer |
| CVE-2021-25140 | A potential security vulnerability has been identified in the HPE Moonshot Provisioning Manager v1.20. The HPE Moonshot Provisioning Manager is an application that is installed in a VMWare or Microsoft Hyper-V environment that is used to setup and configure an HPE Moonshot 1500 chassis. This vulnerability could be remotely exploited by an unauthenticated user to cause a directory traversal in user supplied input to the `khuploadfile.cgi` CGI ELF. The directory traversal could lead to Remote Code Execution, Denial of Service, and/or compromise system integrity. **Note:** HPE recommends that customers discontinue the use of the HPE Moonshot Provisioning Manager. The HPE Moonshot Provisioning Manager application is discontinued, no longer supported, is not available to download from the HPE Support Center, and no patch is available. |
| CVE-2021-25139 | A potential security vulnerability has been identified in the HPE Moonshot Provisioning Manager v1.20. The HPE Moonshot Provisioning Manager is an application that is installed in a VMWare or Microsoft Hyper-V environment that is used to setup and configure an HPE Moonshot 1500 chassis. This vulnerability could be remotely exploited by an unauthenticated user to cause a stack based buffer overflow using user supplied input to the `khuploadfile.cgi` CGI ELF. The stack based buffer overflow could lead to Remote Code Execution, Denial of Service, and/or compromise system integrity. **Note:** HPE recommends that customers discontinue the use of the HPE Moonshot Provisioning Manager. The HPE Moonshot Provisioning Manager application is discontinued, no longer supported, is not available to download from the HPE Support Center, and no patch is available. |
| CVE-2021-23139 | A null pointer vulnerability in Trend Micro Apex One and Worry-Free Business Security 10.0 SP1 could allow an attacker to crash the CGI program on affected installations. |
| CVE-2021-20696 | DAP-1880AC firmware version 1.21 and earlier allows a remote authenticated attacker to execute arbitrary OS commands by sending a specially crafted request to a specific CGI program. |
| CVE-2021-20273 | A flaw was found in privoxy before 3.0.32. A crash can occur via a crafted CGI request if Privoxy is toggled off. |
| CVE-2021-20272 | A flaw was found in privoxy before 3.0.32. An assertion failure could be triggered with a crafted CGI request leading to server crash. |
| CVE-2021-20217 | A flaw was found in Privoxy in versions before 3.0.31. An assertion failure triggered by a crafted CGI request may lead to denial of service. The highest threat from this vulnerability is to system availability. |
| CVE-2021-20215 | A flaw was found in Privoxy in versions before 3.0.29. Memory leaks in the show-status CGI handler when memory allocations fail can lead to a system crash. |
| CVE-2021-20214 | A flaw was found in Privoxy in versions before 3.0.29. Memory leaks in the client-tags CGI handler when client tags are configured and memory allocations fail can lead to a system crash. |
| CVE-2021-20210 | A flaw was found in Privoxy in versions before 3.0.29. Memory leak in the show-status CGI handler when no filter files are configured can lead to a system crash. |
| CVE-2021-20209 | A memory leak vulnerability was found in Privoxy before 3.0.29 in the show-status CGI handler when no action files are configured. |
| CVE-2021-20167 | Netgear RAX43 version 1.0.3.96 contains a command injection vulnerability. The readycloud cgi application is vulnerable to command injection in the name parameter. |
| CVE-2021-20166 | Netgear RAX43 version 1.0.3.96 contains a buffer overrun vulnerability. The URL parsing functionality in the cgi-bin endpoint of the router containers a buffer overrun issue that can redirection control flow of the applicaiton. |
| CVE-2021-20138 | An unauthenticated command injection vulnerability exists in multiple parameters in the Gryphon Tower router’s web interface at /cgi-bin/luci/rc. An unauthenticated remote attacker on the same network can execute commands as root on the device by sending a specially crafted malicious packet to the web interface. |
| CVE-2021-20137 | A reflected cross-site scripting vulnerability exists in the url parameter of the /cgi-bin/luci/site_access/ page on the Gryphon Tower router's web interface. An attacker could exploit this issue by tricking a user into following a specially crafted link, granting the attacker javascript execution in the context of the victim's browser. |
| CVE-2021-20122 | The Telus Wi-Fi Hub (PRV65B444A-S-TS) with firmware version 3.00.20 is affected by an authenticated command injection vulnerability in multiple parameters passed to tr69_cmd.cgi. A remote attacker connected to the router's LAN and authenticated with a super user account, or using a bypass authentication vulnerability like CVE-2021-20090 could leverage this issue to run commands or gain a shell as root on the target device. |
| CVE-2021-20039 | Improper neutralization of special elements in the SMA100 management interface '/cgi-bin/viewcert' POST http method allows a remote authenticated attacker to inject arbitrary commands as a 'nobody' user. This vulnerability affected SMA 200, 210, 400, 410 and 500v appliances. |
| CVE-2021-20038 | A Stack-based buffer overflow vulnerability in SMA100 Apache httpd server's mod_cgi module environment variables allows a remote unauthenticated attacker to potentially execute code as a 'nobody' user in the appliance. This vulnerability affected SMA 200, 210, 400, 410 and 500v appliances firmware 10.2.0.8-37sv, 10.2.1.1-19sv, 10.2.1.2-24sv and earlier versions. |
| CVE-2020-9327 | In SQLite 3.31.1, isAuxiliaryVtabOperator allows attackers to trigger a NULL pointer dereference and segmentation fault because of generated column optimizations. |
| CVE-2020-9277 | An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. Authentication can be bypassed when accessing cgi modules. This allows one to perform administrative tasks (e.g., modify the admin password) with no authentication. |
| CVE-2020-9276 | An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. The function do_cgi(), which processes cgi requests supplied to the device's web servers, is vulnerable to a remotely exploitable stack-based buffer overflow. Unauthenticated exploitation is possible by combining this vulnerability with CVE-2020-9277. |
| CVE-2020-9054 | Multiple ZyXEL network-attached storage (NAS) devices running firmware version 5.21 contain a pre-authentication command injection vulnerability, which may allow a remote, unauthenticated attacker to execute arbitrary code on a vulnerable device. ZyXEL NAS devices achieve authentication by using the weblogin.cgi CGI executable. This program fails to properly sanitize the username parameter that is passed to it. If the username parameter contains certain characters, it can allow command injection with the privileges of the web server that runs on the ZyXEL device. Although the web server does not run as the root user, ZyXEL devices include a setuid utility that can be leveraged to run any command with root privileges. As such, it should be assumed that exploitation of this vulnerability can lead to remote code execution with root privileges. By sending a specially-crafted HTTP POST or GET request to a vulnerable ZyXEL device, a remote, unauthenticated attacker may be able to execute arbitrary code on the device. This may happen by directly connecting to a device if it is directly exposed to an attacker. However, there are ways to trigger such crafted requests even if an attacker does not have direct connectivity to a vulnerable devices. For example, simply visiting a website can result in the compromise of any ZyXEL device that is reachable from the client system. Affected products include: NAS326 before firmware V5.21(AAZF.7)C0 NAS520 before firmware V5.21(AASZ.3)C0 NAS540 before firmware V5.21(AATB.4)C0 NAS542 before firmware V5.21(ABAG.4)C0 ZyXEL has made firmware updates available for NAS326, NAS520, NAS540, and NAS542 devices. Affected models that are end-of-support: NSA210, NSA220, NSA220+, NSA221, NSA310, NSA310S, NSA320, NSA320S, NSA325 and NSA325v2 |
| CVE-2020-9025 | Iteris Vantage Velocity Field Unit 2.4.2 devices have multiple stored XSS issues in all parameters of the Start Data Viewer feature of the /cgi-bin/loaddata.py script. |
| CVE-2020-9022 | An issue was discovered on Xirrus XR520, XR620, XR2436, and XH2-120 devices. The cgi-bin/ViewPage.cgi user parameter allows XSS. |
| CVE-2020-9020 | Iteris Vantage Velocity Field Unit 2.3.1, 2.4.2, and 3.0 devices allow the injection of OS commands into cgi-bin/timeconfig.py via shell metacharacters in the NTP Server field. |
| CVE-2020-8964 | TimeTools SC7105 1.0.007, SC9205 1.0.007, SC9705 1.0.007, SR7110 1.0.007, SR9210 1.0.007, SR9750 1.0.007, SR9850 1.0.007, T100 1.0.003, T300 1.0.003, and T550 1.0.003 devices allow remote attackers to bypass authentication by placing t3axs=TiMEtOOlsj7G3xMm52wB in a t3.cgi request, aka a "hardcoded cookie." |
| CVE-2020-8963 | TimeTools SC7105 1.0.007, SC9205 1.0.007, SC9705 1.0.007, SR7110 1.0.007, SR9210 1.0.007, SR9750 1.0.007, SR9850 1.0.007, T100 1.0.003, T300 1.0.003, and T550 1.0.003 devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the t3.cgi srmodel or srtime parameter. |
| CVE-2020-8949 | Gocloud S2A_WL 4.2.7.16471, S2A 4.2.7.17278, S2A 4.3.0.15815, S2A 4.3.0.17193, S3A K2P MTK 4.2.7.16528, S3A 4.3.0.16572, and ISP3000 4.3.0.17190 devices allows remote attackers to execute arbitrary OS commands via shell metacharacters in a ping operation, as demonstrated by the cgi-bin/webui/admin/tools/app_ping/diag_ping/; substring. |
| CVE-2020-8946 | Netis WF2471 v1.2.30142 devices allow an authenticated attacker to execute arbitrary OS commands via shell metacharacters in the /cgi-bin-igd/sys_log_clean.cgi log_3g_type parameter. |
| CVE-2020-8839 | Stored XSS was discovered on CHIYU BF-430 232/485 TCP/IP Converter devices before 1.16.00, as demonstrated by the /if.cgi TF_submask field. |
| CVE-2020-8515 | DrayTek Vigor2960 1.3.1_Beta, Vigor3900 1.4.4_Beta, and Vigor300B 1.3.3_Beta, 1.4.2.1_Beta, and 1.4.4_Beta devices allow remote code execution as root (without authentication) via shell metacharacters to the cgi-bin/mainfunction.cgi URI. This issue has been fixed in Vigor3900/2960/300B v1.5.1. |
| CVE-2020-8263 | A vulnerability in the authenticated user web interface of Pulse Connect Secure < 9.1R9 could allow attackers to conduct Cross-Site Scripting (XSS) through the CGI file. |
| CVE-2020-8126 | A privilege escalation in the EdgeSwitch prior to version 1.7.1, an CGI script don't fully sanitize the user input resulting in local commands execution, allowing an operator user (Privilege-1) to escalate privileges and became administrator (Privilege-15). |
| CVE-2020-7980 | Intellian Aptus Web 1.24 allows remote attackers to execute arbitrary OS commands via the Q field within JSON data to the cgi-bin/libagent.cgi URI. NOTE: a valid sid cookie for a login to the intellian default account might be needed. |
| CVE-2020-7848 | The EFM ipTIME C200 IP Camera is affected by a Command Injection vulnerability in /login.cgi?logout=1 script. To exploit this vulnerability, an attacker can send a GET request that executes arbitrary OS commands via cookie value. |
| CVE-2020-7357 | Cayin CMS suffers from an authenticated OS semi-blind command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell commands as the root user through the 'NTP_Server_IP' HTTP POST parameter in system.cgi page. This issue affects several branches and versions of the CMS application, including CME-SE, CMS-60, CMS-40, CMS-20, and CMS version 8.2, 8.0, and 7.5. |
| CVE-2020-6954 | An issue was discovered on Cayin SMP-PRO4 devices. A user can discover a saved password by viewing the URL after a Connection String Test. This password is shown in the webpass parameter of a media_folder.cgi?apply_mode=ping_server URI. |
| CVE-2020-6848 | Axper Vision II 4 devices allow XSS via the DEVICE_NAME (aka Device Name) parameter to the configWebParams.cgi URI. |
| CVE-2020-6170 | An authentication bypass vulnerability on Genexis Platinum-4410 v2.1 P4410-V2 1.28 devices allows attackers to obtain cleartext credentials from the HTML source code of the cgi-bin/index2.asp URI. |
| CVE-2020-5738 | Grandstream GXP1600 series firmware 1.0.4.152 and below is vulnerable to authenticated remote command execution when an attacker uploads a specially crafted tar file to the HTTP /cgi-bin/upload_vpntar interface. |
| CVE-2020-36548 | A vulnerability classified as problematic has been found in GE Voluson S8. Affected is the file /uscgi-bin/users.cgi of the Service Browser. The manipulation leads to improper authentication and elevated access possibilities. It is possible to launch the attack on the local host. |
| CVE-2020-36109 | ASUS RT-AX86U router firmware below version under 9.0.0.4_386 has a buffer overflow in the blocking_request.cgi function of the httpd module that can cause code execution when an attacker constructs malicious data. |
| CVE-2020-35769 | miniserv.pl in Webmin 1.962 on Windows mishandles special characters in query arguments to the CGI program. |
| CVE-2020-35743 | HGiga MailSherlock contains a SQL injection flaw. Attackers can inject and launch SQL commands in a URL parameter of specific cgi pages. |
| CVE-2020-35715 | Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote authenticated users to execute arbitrary commands via shell metacharacters in a filename to the upload_settings.cgi page. |
| CVE-2020-35391 | Tenda N300 F3 12.01.01.48 devices allow remote attackers to obtain sensitive information (possibly including an http_passwd line) via a direct request for cgi-bin/DownloadCfg/RouterCfm.cfg, a related issue to CVE-2017-14942. NOTE: the vulnerability report may suggest that either a ? character must be placed after the RouterCfm.cfg filename, or that the HTTP request headers must be unusual, but it is not known why these are relevant to the device's HTTP response behavior. |
| CVE-2020-35176 | In AWStats through 7.8, cgi-bin/awstats.pl?config= accepts a partial absolute pathname (omitting the initial /etc), even though it was intended to only read a file in the /etc/awstats/awstats.conf format. NOTE: this issue exists because of an incomplete fix for CVE-2017-1000501 and CVE-2020-29600. |
| CVE-2020-29656 | An information disclosure vulnerability exists in RT-AC88U Download Master before 3.1.0.108. A direct access to /downloadmaster/dm_apply.cgi?action_mode=initial&download_type=General&special_cgi=get_language makes it possible to reach "unknown functionality" in a "known to be easy" manner via an unspecified "public exploit." |
| CVE-2020-29600 | In AWStats through 7.7, cgi-bin/awstats.pl?config= accepts an absolute pathname, even though it was intended to only read a file in the /etc/awstats/awstats.conf format. NOTE: this issue exists because of an incomplete fix for CVE-2017-1000501. |
| CVE-2020-29390 | Zeroshell 3.9.3 contains a command injection vulnerability in the /cgi-bin/kerbynet StartSessionSubmit parameter that could allow an unauthenticated attacker to execute a system command by using shell metacharacters and the %0a character. |
| CVE-2020-29194 | Panasonic Security System WV-S2231L 4.25 allows a denial of service of the admin control panel (which will require a physical reset to restore administrative control) via Randomnum=99AC8CEC6E845B28&mode=1 in a POST request to the cgi-bin/set_factory URI. |
| CVE-2020-29127 | An issue was discovered on Fujitsu Eternus Storage DX200 S4 devices through 2020-11-25. After logging into the portal as a root user (using any web browser), the portal can be accessed with root privileges when the URI cgi-bin/csp?cspid={XXXXXXXXXX}&csppage=cgi_PgOverview&csplang=en is visited from a different web browser. |
| CVE-2020-29058 | An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. Attackers can discover cleartext web-server credentials via certain /opt/lighttpd/web/cgi/ requests. |
| CVE-2020-28899 | The Web CGI Script on ZyXEL LTE4506-M606 V1.00(ABDO.2)C0 devices does not require authentication, which allows remote unauthenticated attackers (via crafted JSON action data to /cgi-bin/gui.cgi) to use all features provided by the router. Examples: change the router password, retrieve the Wi-Fi passphrase, send an SMS message, or modify the IP forwarding to access the internal network. |
| CVE-2020-28250 | Cellinx NVT Web Server 5.0.0.014b.test 2019-09-05 allows a remote user to run commands as root via SetFileContent.cgi because authentication is on the client side. |
| CVE-2020-27660 | SQL injection vulnerability in request.cgi in Synology SafeAccess before 1.2.3-0234 allows remote attackers to execute arbitrary SQL commands via the domain parameter. |
| CVE-2020-27158 | Addressed remote code execution vulnerability in cgi_api.php that allowed escalation of privileges in Western Digital My Cloud NAS devices prior to 5.04.114. |
| CVE-2020-26762 | A stack-based buffer-overflow exists in Edimax IP-Camera IC-3116W (v3.06) and IC-3140W (v3.07), which allows an unauthenticated, unauthorized attacker to perform remote-code-execution due to a crafted GET-Request. The overflow occurs in binary ipcam_cgi due to a missing type check in function doGetSysteminfo(). This has been fixed in version: IC-3116W v3.08. |
| CVE-2020-26567 | An issue was discovered on D-Link DSR-250N before 3.17B devices. The CGI script upgradeStatusReboot.cgi can be accessed without authentication. Any access reboots the device, rendering it therefore unusable for several minutes. |
| CVE-2020-25849 | MailGates and MailAudit products contain Command Injection flaw, which can be used to inject and execute system commands from the cgi parameter after attackers obtain the user’s access token. |
| CVE-2020-25506 | D-Link DNS-320 FW v2.06B01 Revision Ax is affected by command injection in the system_mgr.cgi component, which can lead to remote arbitrary code execution. |
| CVE-2020-25494 | Xinuos (formerly SCO) Openserver v5 and v6 allows attackers to execute arbitrary commands via shell metacharacters in outputform or toclevels parameter to cgi-bin/printbook. |
| CVE-2020-25366 | An issue in the component /cgi-bin/upload_firmware.cgi of D-Link DIR-823G REVA1 1.02B05 allows attackers to cause a denial of service (DoS) via unspecified vectors. |
| CVE-2020-25079 | An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. cgi-bin/ddns_enc.cgi allows authenticated command injection. |
| CVE-2020-25014 | A stack-based buffer overflow in fbwifi_continue.cgi on Zyxel UTM and VPN series of gateways running firmware version V4.30 through to V4.55 allows remote unauthenticated attackers to execute arbitrary code via a crafted http packet. |
| CVE-2020-25011 | A sensitive information disclosure vulnerability in Kyland KPS2204 6 Port Managed Din-Rail Programmable Serial Device Servers Software Version:R0002.P05 allows remote attackers to get username and password by request /cgi-bin/webadminget.cgi script via the browser. |
| CVE-2020-24916 | CGI implementation in Yaws web server versions 1.81 to 2.0.7 is vulnerable to OS command injection. |
| CVE-2020-24581 | An issue was discovered on D-Link DSL-2888A devices with firmware prior to AU_2.31_V1.1.47ae55. It contains an execute_cmd.cgi feature (that is not reachable via the web user interface) that lets an authenticated user execute Operating System commands. |
| CVE-2020-24553 | Go before 1.14.8 and 1.15.x before 1.15.1 allows XSS because text/html is the default for CGI/FCGI handlers that lack a Content-Type header. |
| CVE-2020-24285 | INTELBRAS TELEFONE IP TIP200 version 60.61.75.22 allows an attacker to obtain sensitive information through /cgi-bin/cgiServer.exx. |
| CVE-2020-24057 | The management website of the Verint S5120FD Verint_FW_0_42 unit features a CGI endpoint ('ipfilter.cgi') that allows the user to manage network filtering on the unit. This endpoint is vulnerable to a command injection. An authenticated attacker can leverage this issue to execute arbitrary commands as 'root'. |
| CVE-2020-22181 | A reflected cross site scripting (XSS) vulnerability was discovered on Samsung sww-3400rw Router devices via the m2 parameter of the sess-bin/command.cgi |
| CVE-2020-22002 | An Unauthenticated Server-Side Request Forgery (SSRF) vulnerability exists in Inim Electronics Smartliving SmartLAN/G/SI <=6.x within the GetImage functionality. The application parses user supplied data in the GET parameter 'host' to construct an image request to the service through onvif.cgi. Since no validation is carried out on the parameter, an attacker can specify an external domain and force the application to make an HTTP request to an arbitrary destination host. |
| CVE-2020-21992 | Inim Electronics SmartLiving SmartLAN/G/SI <=6.x suffers from an authenticated remote command injection vulnerability. The issue exist due to the 'par' POST parameter not being sanitized when called with the 'testemail' module through web.cgi binary. The vulnerable CGI binary (ELF 32-bit LSB executable, ARM) is calling the 'sh' executable via the system() function to issue a command using the mailx service and its vulnerable string format parameter allowing for OS command injection with root privileges. An attacker can remotely execute system commands as the root user using default credentials and bypass access controls in place. |
| CVE-2020-21142 | Cross Site Scripting (XSS) vulnerabilty in IPFire 2.23 via the IPfire web UI in the mail.cgi. |
| CVE-2020-19664 | DrayTek Vigor2960 1.5.1 allows remote command execution via shell metacharacters in a toLogin2FA action to mainfunction.cgi. |
| CVE-2020-19204 | An authenticated Stored Cross-Site Scriptiong (XSS) vulnerability exists in Lightning Wire Labs IPFire 2.21 (x86_64) - Core Update 130 in the "routing.cgi" Routing Table Entries via the "Remark" text box or "remark" parameter. It allows an authenticated WebGUI user to execute Stored Cross-site Scripting in the Routing Table Entries. |
| CVE-2020-19202 | An authenticated Stored XSS (Cross-site Scripting) exists in the "captive.cgi" Captive Portal via the "Title of Login Page" text box or "TITLE" parameter in IPFire 2.21 (x86_64) - Core Update 130. It allows an authenticated WebGUI user with privileges to execute Stored Cross-site Scripting in the Captive Portal page. |
| CVE-2020-18331 | Directory traversal vulnerability in ChinaMobile PLC Wireless Router model GPN2.4P21-C-CN running the firmware version W2000EN-01(hardware platform Gpn2.4P21-C_WIFI-V0.05), via the getpage parameter to /cgi-bin/webproc. |
| CVE-2020-17456 | SEOWON INTECH SLC-130 And SLR-120S devices allow Remote Code Execution via the ipAddr parameter to the system_log.cgi page. |
| CVE-2020-15892 | An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user. |
| CVE-2020-15832 | An issue was discovered on Mofi Network MOFI4500-4GXeLTE 4.1.5-std devices. The poof.cgi script contains undocumented code that provides the ability to remotely reboot the device. An adversary with the private key (but not the root password) can remotely reboot the device. |
| CVE-2020-15689 | Appweb before 7.2.2 and 8.x before 8.1.0, when built with CGI support, mishandles an HTTP request with a Range header that lacks an exact range. This may result in a NULL pointer dereference and cause a denial of service. |
| CVE-2020-15490 | An issue was discovered on Wavlink WL-WN530HG4 M30HG4.V5030.191116 devices. Multiple buffer overflow vulnerabilities exist in CGI scripts, leading to remote code execution with root privileges. (The set of affected scripts is similar to CVE-2020-12266.) |
| CVE-2020-15489 | An issue was discovered on Wavlink WL-WN530HG4 M30HG4.V5030.191116 devices. Multiple shell metacharacter injection vulnerabilities exist in CGI scripts, leading to remote code execution with root privileges. |
| CVE-2020-15415 | On DrayTek Vigor3900, Vigor2960, and Vigor300B devices before 1.5.1, cgi-bin/mainfunction.cgi/cvmcfgupload allows remote command execution via shell metacharacters in a filename when the text/x-python-script content type is used, a different issue than CVE-2020-14472. |
| CVE-2020-15046 | The web interface on Supermicro X10DRH-iT motherboards with BIOS 2.0a and IPMI firmware 03.40 allows remote attackers to exploit a cgi/config_user.cgi CSRF issue to add new admin users. The fixed versions are BIOS 3.2 and firmware 03.88. |
| CVE-2020-15011 | GNU Mailman before 2.1.33 allows arbitrary content injection via the Cgi/private.py private archive login page. |
| CVE-2020-14993 | A stack-based buffer overflow on DrayTek Vigor2960, Vigor3900, and Vigor300B devices before 1.5.1.1 allows remote attackers to execute arbitrary code via the formuserphonenumber parameter in an authusersms action to mainfunction.cgi. |
| CVE-2020-14472 | On Draytek Vigor3900, Vigor2960, and Vigor 300B devices before 1.5.1.1, there are some command-injection vulnerabilities in the mainfunction.cgi file. |
| CVE-2020-14081 | TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action send_log_email with the key auth_acname (or auth_passwd), allowing an authenticated user to run arbitrary commands on the device. |
| CVE-2020-14080 | TRENDnet TEW-827DRU devices through 2.06B04 contain a stack-based buffer overflow in the ssi binary. The overflow allows an unauthenticated user to execute arbitrary code by POSTing to apply_sec.cgi via the action ping_test with a sufficiently long ping_ipaddr key. |
| CVE-2020-14079 | TRENDnet TEW-827DRU devices through 2.06B04 contain a stack-based buffer overflow in the ssi binary. The overflow allows an authenticated user to execute arbitrary code by POSTing to apply.cgi via the action auto_up_fw (or auto_up_lp) with a sufficiently long update_file_name key. |
| CVE-2020-14078 | TRENDnet TEW-827DRU devices through 2.06B04 contain a stack-based buffer overflow in the ssi binary. The overflow allows an authenticated user to execute arbitrary code by POSTing to apply.cgi via the action wifi_captive_portal_login with a sufficiently long REMOTE_ADDR key. |
| CVE-2020-14077 | TRENDnet TEW-827DRU devices through 2.06B04 contain a stack-based buffer overflow in the ssi binary. The overflow allows an authenticated user to execute arbitrary code by POSTing to apply.cgi via the action set_sta_enrollee_pin_wifi1 (or set_sta_enrollee_pin_wifi0) with a sufficiently long wps_sta_enrollee_pin key. |
| CVE-2020-14076 | TRENDnet TEW-827DRU devices through 2.06B04 contain a stack-based buffer overflow in the ssi binary. The overflow allows an authenticated user to execute arbitrary code by POSTing to apply.cgi via the action st_dev_connect, st_dev_disconnect, or st_dev_rconnect with a sufficiently long wan_type key. |
| CVE-2020-14075 | TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action pppoe_connect, ru_pppoe_connect, or dhcp_connect with the key wan_ifname (or wan0_dns), allowing an authenticated user to run arbitrary commands on the device. |
| CVE-2020-14074 | TRENDnet TEW-827DRU devices through 2.06B04 contain a stack-based buffer overflow in the ssi binary. The overflow allows an authenticated user to execute arbitrary code by POSTing to apply.cgi via the action kick_ban_wifi_mac_allow with a sufficiently long qcawifi.wifi0_vap0.maclist key. |
| CVE-2020-13977 | Nagios 4.4.5 allows an attacker, who already has administrative access to change the "URL for JSON CGIs" configuration setting, to modify the Alert Histogram and Trends code via crafted versions of the archivejson.cgi, objectjson.cgi, and statusjson.cgi files. NOTE: this vulnerability has been mistakenly associated with CVE-2020-1408. |
| CVE-2020-13886 | Intelbras TIP 200 60.61.75.15, TIP 200 LITE 60.61.75.15, and TIP 300 65.61.75.22 devices allow cgi-bin/cgiServer.exx?page=../ Directory Traversal. |
| CVE-2020-13859 | An issue was discovered on Mofi Network MOFI4500-4GXeLTE 4.0.8-std devices. A format error in /etc/shadow, coupled with a logic bug in the LuCI - OpenWrt Configuration Interface framework, allows the undocumented system account mofidev to login to the cgi-bin/luci/quick/wizard management interface without a password by abusing a forgotten-password feature. |
| CVE-2020-13857 | An issue was discovered on Mofi Network MOFI4500-4GXeLTE 3.6.1-std and 4.0.8-std devices. They can be rebooted by sending an unauthenticated poof.cgi HTTP GET request. |
| CVE-2020-13772 | In /ldclient/ldprov.cgi in Ivanti Endpoint Manager through 2020.1.1, an attacker is able to disclose information about the server operating system, local pathnames, and environment variables with no authentication required. |
| CVE-2020-13364 | A backdoor in certain Zyxel products allows remote TELNET access via a CGI script. This affects NAS520 V5.21(AASZ.4)C0, V5.21(AASZ.0)C0, V5.11(AASZ.3)C0, and V5.11(AASZ.0)C0; NAS542 V5.11(ABAG.0)C0, V5.20(ABAG.1)C0, and V5.21(ABAG.3)C0; NSA325 v2_V4.81(AALS.0)C0 and V4.81(AAAJ.1)C0; NSA310 4.22(AFK.0)C0 and 4.22(AFK.1)C0; NAS326 V5.21(AAZF.8)C0, V5.11(AAZF.4)C0, V5.11(AAZF.2)C0, and V5.11(AAZF.3)C0; NSA310S V4.75(AALH.2)C0; NSA320S V4.75(AANV.2)C0 and V4.75(AANV.1)C0; NSA221 V4.41(AFM.1)C0; and NAS540 V5.21(AATB.5)C0 and V5.21(AATB.3)C0. |
| CVE-2020-12262 | Intelbras TIP200 60.61.75.15, TIP200LITE 60.61.75.15, and TIP300 65.61.75.15 devices allow /cgi-bin/cgiServer.exx?page= XSS. |
| CVE-2020-12127 | An information disclosure vulnerability in the /cgi-bin/ExportAllSettings.sh endpoint of the WAVLINK WN530H4 M30H4.V5030.190403 allows an attacker to leak router settings, including cleartext login details, DNS settings, and other sensitive information without authentication. |
| CVE-2020-12126 | Multiple authentication bypass vulnerabilities in the /cgi-bin/ endpoint of the WAVLINK WN530H4 M30H4.V5030.190403 allow an attacker to leak router settings, change configuration variables, and cause denial of service via an unauthenticated endpoint. |
| CVE-2020-12125 | A remote buffer overflow vulnerability in the /cgi-bin/makeRequest.cgi endpoint of the WAVLINK WN530H4 M30H4.V5030.190403 allows an attacker to execute arbitrary machine instructions as root without authentication. |
| CVE-2020-12124 | A remote command-line injection vulnerability in the /cgi-bin/live_api.cgi endpoint of the WAVLINK WN530H4 M30H4.V5030.190403 allows an attacker to execute arbitrary Linux commands as root without authentication. |
| CVE-2020-12123 | CSRF vulnerabilities in the /cgi-bin/ directory of the WAVLINK WN530H4 M30H4.V5030.190403 allow an attacker to remotely access router endpoints, because these endpoints do not contain CSRF tokens. If a user is authenticated in the router portal, then this attack will work. |
| CVE-2020-11949 | testserver.cgi of the web service on VIVOTEK Network Cameras before XXXXX-VVTK-2.2002.xx.01x (and before XXXXX-VVTK-0XXXX_Beta2) allows an authenticated user to obtain arbitrary files from a camera's local filesystem. For example, this affects IT9388-HT devices. |
| CVE-2020-11915 | An issue was discovered in Svakom Siime Eye 14.1.00000001.3.330.0.0.3.14. By sending a set_params.cgi?telnetd=1&save=1&reboot=1 request to the webserver, it is possible to enable the telnet interface on the device. The telnet interface can then be used to obtain access to the device with root privileges via a reecam4debug default password. This default telnet password is the same across all Siime Eye devices. In order for the attack to be exploited, an attacker must be physically close in order to connect to the device's Wi-Fi access point. |
| CVE-2020-11734 | cgi-bin/go in CyberSolutions CyberMail 5 or later allows XSS via the ACTION parameter. |
| CVE-2020-11656 | In SQLite through 3.31.1, the ALTER TABLE implementation has a use-after-free, as demonstrated by an ORDER BY clause that belongs to a compound SELECT statement. |
| CVE-2020-11655 | SQLite through 3.31.1 allows attackers to cause a denial of service (segmentation fault) via a malformed window-function query because the AggInfo object's initialization is mishandled. |
| CVE-2020-11491 | Monitoring::Logs in Zen Load Balancer 3.10.1 allows remote authenticated admins to conduct absolute path traversal attacks, as demonstrated by a filelog=/etc/shadow request to index.cgi. |
| CVE-2020-11490 | Manage::Certificates in Zen Load Balancer 3.10.1 allows remote authenticated admins to execute arbitrary OS commands via shell metacharacters in the index.cgi cert_issuer, cert_division, cert_organization, cert_locality, cert_state, cert_country, or cert_email parameter. |
| CVE-2020-11447 | An issue was discovered on Bell HomeHub 3000 SG48222070 devices. Remote authenticated users can retrieve the serial number via cgi/json-req - this is an information leak because the serial number is intended to prove an actor's physical access to the device. |
| CVE-2020-10973 | An issue was discovered in Wavlink WN530HG4, Wavlink WN531G3, Wavlink WN533A8, and Wavlink WN551K1 affecting /cgi-bin/ExportAllSettings.sh where a crafted POST request returns the current configuration of the device, including the administrator password. No authentication is required. The attacker must perform a decryption step, but all decryption information is readily available. |
| CVE-2020-10971 | An issue was discovered on Wavlink Jetstream devices where a crafted POST request can be sent to adm.cgi that will result in the execution of the supplied command if there is an active session at the same time. The POST request itself is not validated to ensure it came from the active session. Affected devices are: Wavlink WN530HG4, Wavlink WN575A3, Wavlink WN579G3,Wavlink WN531G3, Wavlink WN533A8, Wavlink WN531A6, Wavlink WN551K1, Wavlink WN535G3, Wavlink WN530H4, Wavlink WN57X93, WN572HG3, Wavlink WN578A2, Wavlink WN579G3, Wavlink WN579X3, and Jetstream AC3000/ERAC3000 |
| CVE-2020-10948 | Jon Hedley AlienForm2 (typically installed as af.cgi or alienform.cgi) 2.0.2 is vulnerable to Remote Command Execution via eval injection, a different issue than CVE-2002-0934. An unauthenticated, remote attacker can exploit this via a series of crafted requests. |
| CVE-2020-10826 | /cgi-bin/activate.cgi on Draytek Vigor3900, Vigor2960, and Vigor300B devices before 1.5.1 allows remote attackers to achieve command injection via a remote HTTP request in DEBUG mode. |
| CVE-2020-10825 | A stack-based buffer overflow in /cgi-bin/activate.cgi while base64 decoding ticket parameter on Draytek Vigor3900, Vigor2960, and Vigor300B devices before 1.5.1 allows remote attackers to achieve code execution via a remote HTTP request (issue 3 of 3). |
| CVE-2020-10824 | A stack-based buffer overflow in /cgi-bin/activate.cgi through ticket parameter on Draytek Vigor3900, Vigor2960, and Vigor300B devices before 1.5.1 allows remote attackers to achieve code execution via a remote HTTP request (issue 2 of 3). |
| CVE-2020-10823 | A stack-based buffer overflow in /cgi-bin/activate.cgi through var parameter on Draytek Vigor3900, Vigor2960, and Vigor300B devices before 1.5.1 allows remote attackers to achieve code execution via a remote HTTP request (issue 1 of 3). |
| CVE-2020-10216 | An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the date parameter in a system_time.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected. |
| CVE-2020-10215 | An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the dns_query_name parameter in a dns_query.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected. |
| CVE-2020-10214 | An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. There is a stack-based buffer overflow in the httpd binary. It allows an authenticated user to execute arbitrary code via a POST to ntp_sync.cgi with a sufficiently long parameter ntp_server. |
| CVE-2020-10213 | An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the wps_sta_enrollee_pin parameter in a set_sta_enrollee_pin.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected. |
| CVE-2020-10173 | Comtrend VR-3033 DE11-416SSG-C01_R02.A2pvI042j1.d26m devices have Multiple Authenticated Command Injection vulnerabilities via the ping and traceroute diagnostic pages, as demonstrated by shell metacharacters in the pingIpAddress parameter to ping.cgi. |
| CVE-2019-9975 | DASAN H660RM devices with firmware 1.03-0022 use a hard-coded key for logs encryption. Data stored using this key can be decrypted by anyone able to access this key. |
| CVE-2019-9974 | diag_tool.cgi on DASAN H660RM GPON routers with firmware 1.03-0022 lacks any authorization check, which allows remote attackers to run a ping command via a GET request to enumerate LAN devices or crash the router with a DoS attack. |
| CVE-2019-9950 | Western Digital My Cloud, My Cloud Mirror Gen2, My Cloud EX2 Ultra, My Cloud EX2100, My Cloud EX4100, My Cloud DL2100, My Cloud DL4100, My Cloud PR2100 and My Cloud PR4100 firmware before 2.31.174 is affected by an authentication bypass vulnerability. The login_mgr.cgi file checks credentials against /etc/shadow. However, the "nobody" account (which can be used to access the control panel API as a low-privilege logged-in user) has a default empty password, allowing an attacker to modify the My Cloud EX2 Ultra web page source code and obtain access to the My Cloud as a non-Admin My Cloud device user. |
| CVE-2019-9949 | Western Digital My Cloud Cloud, Mirror Gen2, EX2 Ultra, EX2100, EX4100, DL2100, DL4100, PR2100 and PR4100 before firmware 2.31.183 are affected by a code execution (as root, starting from a low-privilege user session) vulnerability. The cgi-bin/webfile_mgr.cgi file allows arbitrary file write by abusing symlinks. Specifically, this occurs by uploading a tar archive that contains a symbolic link, then uploading another archive that writes a file to the link using the "cgi_untar" command. Other commands might also be susceptible. Code can be executed because the "name" parameter passed to the cgi_unzip command is not sanitized. |
| CVE-2019-9883 | Multi modules of MailSherlock MSR35 and MSR45 lead to a CSRF vulnerability. It allows attacker to elevate privilege of specific account via useradmin/cf_new.cgi?chief=&wk_group=full&cf_name=test&cf_account=test&cf_email=&cf_acl=Management&apply_lang=&dn= without any authorizes. |
| CVE-2019-9677 | The specific fields of CGI interface of some Dahua products are not strictly verified, an attacker can cause a buffer overflow by constructing malicious packets. Affected products include: IPC-HDW1X2X,IPC-HFW1X2X,IPC-HDW2X2X,IPC-HFW2X2X,IPC-HDW4X2X,IPC-HFW4X2X,IPC-HDBW4X2X,IPC-HDW5X2X,IPC-HFW5X2X for versions which Build time is before August 18, 2019. |
| CVE-2019-9624 | Webmin 1.900 allows remote attackers to execute arbitrary code by leveraging the "Java file manager" and "Upload and Download" privileges to upload a crafted .cgi file via the /updown/upload.cgi URI. |
| CVE-2019-9169 | In the GNU C Library (aka glibc or libc6) through 2.29, proceed_next_node in posix/regexec.c has a heap-based buffer over-read via an attempted case-insensitive regular-expression match. |
| CVE-2019-9122 | An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the ntp_server parameter in an ntp_sync.cgi POST request. |
| CVE-2019-7746 | JioFi 4 jmr1140 Amtel_JMR1140_R12.07 devices allow remote attackers to obtain an admin token by making a /cgi-bin/qcmap_auth type=getuser request and then reading the token field. This token value can then be used to change the Wi-Fi password or perform a factory reset. |
| CVE-2019-7745 | JioFi 4 jmr1140 Amtel_JMR1140_R12.07 devices allow remote attackers to obtain the Wi-Fi password by making a cgi-bin/qcmap_web_cgi Page=GetWiFi_Setting request and then reading the wpa_security_key field. |
| CVE-2019-7687 | cgi-bin/qcmap_web_cgi on JioFi 4 jmr1140 Amtel_JMR1140_R12.07 devices has POST based reflected XSS via the Page parameter. No sanitization is performed for user input data. |
| CVE-2019-7617 | When the Elastic APM agent for Python versions before 5.1.0 is run as a CGI script, there is a variable name clash flaw if a remote attacker can control the proxy header. This could result in an attacker redirecting collected APM data to a proxy of their choosing. |
| CVE-2019-7486 | Code injection in SonicWall SMA100 allows an authenticated user to execute arbitrary code in viewcacert CGI script. This vulnerability impacted SMA100 version 9.0.0.4 and earlier. |
| CVE-2019-7485 | Buffer overflow in SonicWall SMA100 allows an authenticated user to execute arbitrary code in DEARegister CGI script. This vulnerability impacted SMA100 version 9.0.0.3 and earlier. |
| CVE-2019-7484 | Authenticated SQL Injection in SonicWall SMA100 allow user to gain read-only access to unauthorized resources using viewcacert CGI script. This vulnerability impacted SMA100 version 9.0.0.3 and earlier. |
| CVE-2019-7483 | In SonicWall SMA100, an unauthenticated Directory Traversal vulnerability in the handleWAFRedirect CGI allows the user to test for the presence of a file on the server. |
| CVE-2019-7441 | ** DISPUTED ** cgi-bin/webscr?cmd=_cart in the WooCommerce PayPal Checkout Payment Gateway plugin 1.6.8 for WordPress allows Parameter Tampering in an amount parameter (such as amount_1), as demonstrated by purchasing an item for lower than the intended price. NOTE: The plugin author states it is true that the amount can be manipulated in the PayPal payment flow. However, the amount is validated against the WooCommerce order total before completing the order, and if it doesn’t match then the order will be left in an “On Hold” state. |
| CVE-2019-7440 | JioFi 4G M2S 1.0.2 devices have CSRF via the SSID name and Security Key field under Edit Wi-Fi Settings (aka a SetWiFi_Setting request to cgi-bin/qcmap_web_cgi). |
| CVE-2019-7439 | cgi-bin/qcmap_web_cgi on JioFi 4G M2S 1.0.2 devices allows a DoS (Hang) via the mask POST parameter. |
| CVE-2019-7438 | cgi-bin/qcmap_web_cgi on JioFi 4G M2S 1.0.2 devices has XSS and HTML injection via the mask POST parameter. |
| CVE-2019-7417 | XSS exists in Ericsson Active Library Explorer (ALEX) 14.3 in multiple parameters in the "/cgi-bin/alexserv" servlet, as demonstrated by the DB, FN, fn, or id parameter. |
| CVE-2019-7391 | ZyXEL VMG3312-B10B DSL-491HNU-B1B v2 devices allow login/login-page.cgi CSRF. |
| CVE-2019-7301 | Zen Load Balancer 3.10.1 allows remote authenticated admin users to execute arbitrary commands as root via shell metacharacters in the index.cgi?action=View_Cert certname parameter. |
| CVE-2019-7226 | The ABB IDAL HTTP server CGI interface contains a URL that allows an unauthenticated attacker to bypass authentication and gain access to privileged functions. Specifically, /cgi/loginDefaultUser creates a session in an authenticated state and returns the session ID along with what may be the username and cleartext password of the user. An attacker can then supply an IDALToken value in a cookie, which will allow them to perform privileged operations such as restarting the service with /cgi/restart. A GET request to /cgi/loginDefaultUser may result in "1 #S_OK IDALToken=532c8632b86694f0232a68a0897a145c admin admin" or a similar response. |
| CVE-2019-7216 | An issue was discovered in FileChucker 4.99e-free-e02. filechucker.cgi has a filter bypass that allows a malicious user to upload any type of file by using % characters within the extension, e.g., file.%ph%p becomes file.php. |
| CVE-2019-6967 | AirTies Air5341 1.0.0.12 devices allow cgi-bin/login CSRF. |
| CVE-2019-6710 | Zyxel NBG-418N v2 v1.00(AAXM.4)C0 devices allow login.cgi CSRF. |
| CVE-2019-6451 | On SOYAL AR-727H and AR-829Ev5 devices, all CGI programs allow unauthenticated POST access. |
| CVE-2019-6441 | An issue was discovered on Shenzhen Coship RT3050 4.0.0.40, RT3052 4.0.0.48, RT7620 10.0.0.49, WM3300 5.0.0.54, and WM3300 5.0.0.55 devices. The password reset functionality of the router doesn't have backend validation for the current password and doesn't require any type of authentication. By making a POST request to the apply.cgi file of the router, the attacker can change the admin username and password of the router. |
| CVE-2019-6282 | ChinaMobile PLC Wireless Router GPN2.4P21-C-CN devices with firmware W2001EN-00 have CSRF via the cgi-bin/webproc?getpage=html/index.html subpage=wlsecurity URI, allowing an Attacker to change the Wireless Security Password. |
| CVE-2019-6279 | ChinaMobile PLC Wireless Router GPN2.4P21-C-CN devices with firmware W2001EN-00 have an Incorrect Access Control vulnerability via the cgi-bin/webproc?getpage=html/index.html subpage=wlsecurity URI, allowing an Attacker to change the Wireless Security Password. |
| CVE-2019-6275 | Command injection vulnerability in firmware_cgi in GL.iNet GL-AR300M-Lite devices with firmware 2.27 allows remote attackers to execute arbitrary code. |
| CVE-2019-6274 | Directory traversal vulnerability in storage_cgi in GL.iNet GL-AR300M-Lite devices with firmware 2.27 allows remote attackers to have unspecified impact via directory traversal sequences. |
| CVE-2019-6272 | Command injection vulnerability in login_cgi in GL.iNet GL-AR300M-Lite devices with firmware 2.27 allows remote attackers to execute arbitrary code. |
| CVE-2019-5990 | Access analysis CGI An-Analyzer released in 2019 June 24 and earlier allow remote attackers to obtain a login password via HTTP referer. |
| CVE-2019-5989 | DOM-based cross-site scripting vulnerability in Access analysis CGI An-Analyzer released in 2019 June 24 and earlier allows remote attackers to inject arbitrary web script or HTML via the Analysis Object Page. |
| CVE-2019-5988 | Stored cross-site scripting vulnerability in Access analysis CGI An-Analyzer released in 2019 June 24 and earlier allows remote attackers to inject arbitrary web script or HTML via the Management Page. |
| CVE-2019-5987 | Access analysis CGI An-Analyzer released in 2019 June 24 and earlier allows remote authenticated attackers to execute arbitrary OS commands via the Management Page. |
| CVE-2019-5149 | The WBM web application on firmwares prior to 03.02.02 and 03.01.07 on the WAGO PFC100 and PFC2000, respectively, runs on a lighttpd web server and makes use of the FastCGI module, which is intended to provide high performance for all Internet applications without the penalties of Web server APIs. However, the default configuration of this module appears to limit the number of concurrent php-cgi processes to two, which can be abused to cause a denial of service of the entire web server. This affects WAGO PFC200 Firmware version 03.00.39(12) and version 03.01.07(13), and WAGO PFC100 Firmware version 03.00.39(12) and version 03.02.02(14). |
| CVE-2019-3935 | Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 allows anyone to act as a moderator to a slide show via crafted HTTP POST requests to conference.cgi. A remote, unauthenticated attacker can use this vulnerability to start, stop, and disconnect active slideshows. |
| CVE-2019-3934 | Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 allows anyone to bypass the presentation code sending a crafted HTTP POST request to login.cgi. A remote, unauthenticated attacker can use this vulnerability to download the current slide image without knowing the access code. |
| CVE-2019-3931 | Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 are vulnerable to argumention injection to the curl binary via crafted HTTP requests to return.cgi. A remote, authenticated attacker can use this vulnerability to upload files to the device and ultimately execute code as root. |
| CVE-2019-3930 | The Crestron AM-100 firmware 1.6.0.2, Crestron AM-101 firmware 2.7.0.1, Barco wePresent WiPG-1000P firmware 2.3.0.10, Barco wePresent WiPG-1600W before firmware 2.4.1.19, Extron ShareLink 200/250 firmware 2.0.3.4, Teq AV IT WIPS710 firmware 1.1.0.7, SHARP PN-L703WA firmware 1.4.2.3, Optoma WPS-Pro firmware 1.0.0.5, Blackbox HD WPS firmware 1.0.0.5, InFocus LiteShow3 firmware 1.0.16, and InFocus LiteShow4 2.0.0.7 are vulnerable to a stack buffer overflow in libAwgCgi.so's PARSERtoCHAR function. A remote, unauthenticated attacker can use this vulnerability to execute arbitrary code as root via a crafted request to the return.cgi endpoint. |
| CVE-2019-3929 | The Crestron AM-100 firmware 1.6.0.2, Crestron AM-101 firmware 2.7.0.1, Barco wePresent WiPG-1000P firmware 2.3.0.10, Barco wePresent WiPG-1600W before firmware 2.4.1.19, Extron ShareLink 200/250 firmware 2.0.3.4, Teq AV IT WIPS710 firmware 1.1.0.7, SHARP PN-L703WA firmware 1.4.2.3, Optoma WPS-Pro firmware 1.0.0.5, Blackbox HD WPS firmware 1.0.0.5, InFocus LiteShow3 firmware 1.0.16, and InFocus LiteShow4 2.0.0.7 are vulnerable to command injection via the file_transfer.cgi HTTP endpoint. A remote, unauthenticated attacker can use this vulnerability to execute operating system commands as root. |
| CVE-2019-3910 | Crestron AM-100 before firmware version 1.6.0.2 contains an authentication bypass in the web interface's return.cgi script. Unauthenticated remote users can use the bypass to access some administrator functionality such as configuring update sources and rebooting the device. |
| CVE-2019-3404 | By adding some special fields to the uri ofrouter app function, the user could abuse background app cgi functions withoutauthentication. This affects 360 router P0 and F5C. |
| CVE-2019-20800 | In Cherokee through 1.2.104, remote attackers can trigger an out-of-bounds write in cherokee_handler_cgi_add_env_pair in handler_cgi.c by sending many request headers, as demonstrated by a GET request with many "Host: 127.0.0.1" headers. |
| CVE-2019-20501 | D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Upgrade Firmware functionality in the Web interface, using shell metacharacters in the admin.cgi?action=upgrade firmwareRestore or firmwareServerip parameter. |
| CVE-2019-20500 | D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Save Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_save configBackup or downloadServerip parameter. |
| CVE-2019-20499 | D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Restore Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_restore configRestore or configServerip parameter. |
| CVE-2019-20489 | An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie. |
| CVE-2019-20488 | An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. Multiple actions within the web management interface (setup.cgi) are vulnerable to command injection, allowing remote attackers to execute arbitrary commands, as demonstrated by shell metacharacters in the sysDNSHost parameter. |
| CVE-2019-20487 | An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. Multiple actions within the WNR1000V4 web management console are vulnerable to an unauthenticated GET request (exploitable directly or through CSRF), as demonstrated by the setup.cgi?todo=save_htp_account URI. |
| CVE-2019-20486 | An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. Multiple pages (setup.cgi and adv_index.htm) within the web management console are vulnerable to stored XSS, as demonstrated by the configuration of the UI language. |
| CVE-2019-20076 | On Netis DL4323 devices, XSS exists via the form2Ddns.cgi username parameter (DynDns settings of the Dynamic DNS Configuration). |
| CVE-2019-20074 | On Netis DL4323 devices, any user role can view sensitive information, such as a user password or the FTP password, via the form2saveConf.cgi page. |
| CVE-2019-20073 | On Netis DL4323 devices, XSS exists via the form2userconfig.cgi username parameter (User Account Configuration). |
| CVE-2019-20072 | On Netis DL4323 devices, XSS exists via the form2Ddns.cgi hostname parameter (Dynamic DNS Configuration). |
| CVE-2019-20071 | On Netis DL4323 devices, CSRF exists via form2logaction.cgi to delete all logs. |
| CVE-2019-20070 | On Netis DL4323 devices, XSS exists via the urlFQDN parameter to form2url.cgi (aka the Keyword field of the URL Blocking Configuration). |
| CVE-2019-19945 | uhttpd in OpenWrt through 18.06.5 and 19.x through 19.07.0-rc2 has an integer signedness error. This leads to out-of-bounds access to a heap buffer and a subsequent crash. It can be triggered with an HTTP POST request to a CGI script, specifying both "Transfer-Encoding: chunked" and a large negative Content-Length value. |
| CVE-2019-19608 | A SQL injection vulnerability in in the web conferencing component of Mitel MiCollab AWV before 8.1.2.2 could allow an unauthenticated attack due to insufficient input validation for the registeredList.cgi page. A successful exploit could allow an attacker to extract sensitive information from the database and execute arbitrary scripts. |
| CVE-2019-19143 | TP-LINK TL-WR849N 0.9.1 4.16 devices do not require authentication to replace the firmware via a POST request to the cgi/softup URI. |
| CVE-2019-19117 | /usr/lib/lua/luci/controller/admin/autoupgrade.lua on PHICOMM K2(PSG1218) V22.5.9.163 devices allows remote authenticated users to execute any command via shell metacharacters in the cgi-bin/luci autoUpTime parameter. |
| CVE-2019-18993 | OpenWrt 18.06.4 allows XSS via the "New port forward" Name field to the cgi-bin/luci/admin/network/firewall/forwards URI (this can occur, for example, on a TP-Link Archer C7 device). |
| CVE-2019-18992 | OpenWrt 18.06.4 allows XSS via these Name fields to the cgi-bin/luci/admin/network/firewall/rules URI: "Open ports on router" and "New forward rule" and "New Source NAT" (this can occur, for example, on a TP-Link Archer C7 device). |
| CVE-2019-18952 | SibSoft Xfilesharing through 2.5.1 allows cgi-bin/up.cgi arbitrary file upload. This can be combined with CVE-2019-18951 to achieve remote code execution via a .html file, containing short codes, that is served over HTTP. |
| CVE-2019-18939 | eQ-3 Homematic CCU2 2.47.20 and CCU3 3.47.18 with the HM-Print AddOn through 1.2a installed allow Remote Code Execution by unauthenticated attackers with access to the web interface via the exec.cgi and exec1.cgi scripts, which execute TCL script content from an HTTP POST request. |
| CVE-2019-18938 | eQ-3 Homematic CCU2 2.47.20 and CCU3 3.47.18 with the E-Mail AddOn through 1.6.8.c installed allow Remote Code Execution by unauthenticated attackers with access to the web interface via the save.cgi script for payload upload and the testtcl.cgi script for its execution. |
| CVE-2019-18937 | eQ-3 Homematic CCU2 2.47.20 and CCU3 3.47.18 with the Script Parser AddOn through 1.8 installed allow Remote Code Execution by unauthenticated attackers with access to the web interface via the exec.cgi script, which executes TCL script content from an HTTP POST request. |
| CVE-2019-18930 | Western Digital My Cloud EX2 Ultra firmware 2.31.183 allows web users (including guest account) to remotely execute arbitrary code via a stack-based buffer overflow. There is no size verification logic in one of functions in libscheddl.so, and download_mgr.cgi makes it possible to enter large-sized f_idx inputs. |
| CVE-2019-18929 | Western Digital My Cloud EX2 Ultra firmware 2.31.183 allows web users (including guest accounts) to remotely execute arbitrary code via a download_mgr.cgi stack-based buffer overflow. |
| CVE-2019-18860 | Squid before 4.9, when certain web browsers are used, mishandles HTML in the host (aka hostname) parameter to cachemgr.cgi. |
| CVE-2019-18396 | An issue was discovered in certain Oi third-party firmware that may be installed on Technicolor TD5130v2 devices. A Command Injection in the Ping module in the Web Interface in OI_Fw_V20 allows remote attackers to execute arbitrary OS commands in the pingAddr parameter to mnt_ping.cgi. NOTE: This may overlap CVE-2017–14127. |
| CVE-2019-18203 | On the RICOH MP 501 printer, HTML Injection and Stored XSS vulnerabilities have been discovered in the area of adding addresses via the entryNameIn and KeyDisplay parameter to /web/entry/en/address/adrsSetUserWizard.cgi. |
| CVE-2019-17621 | The UPnP endpoint URL /gena.cgi in the D-Link DIR-859 Wi-Fi router 1.05 and 1.06B01 Beta01 allows an Unauthenticated remote attacker to execute system commands as root, by sending a specially crafted HTTP SUBSCRIBE request to the UPnP service when connecting to the local network. |
| CVE-2019-17373 | Certain NETGEAR devices allow unauthenticated access to critical .cgi and .htm pages via a substring ending with .jpg, such as by appending ?x=1.jpg to a URL. This affects MBR1515, MBR1516, DGN2200, DGN2200M, DGND3700, WNR2000v2, WNDR3300, WNDR3400, WNR3500, and WNR834Bv2. |
| CVE-2019-17372 | Certain NETGEAR devices allow remote attackers to disable all authentication requirements by visiting genieDisableLanChanged.cgi. The attacker can then, for example, visit MNU_accessPassword_recovered.html to obtain a valid new admin password. This affects AC1450, D8500, DC112A, JNDR3000, LG2200D, R4500, R6200, R6200V2, R6250, R6300, R6300v2, R6400, R6700, R6900P, R6900, R7000P, R7000, R7100LG, R7300, R7900, R8000, R8300, R8500, WGR614v10, WN2500RPv2, WNDR3400v2, WNDR3700v3, WNDR4000, WNDR4500, WNDR4500v2, WNR1000, WNR1000v3, WNR3500L, and WNR3500L. |
| CVE-2019-17367 | OpenWRT firmware version 18.06.4 is vulnerable to CSRF via wireless/radio0.network1, wireless/radio1.network1, firewall, firewall/zones, firewall/forwards, firewall/rules, network/wan, network/wan6, or network/lan under /cgi-bin/luci/admin/network/. |
| CVE-2019-17187 | /var/WEB-GUI/cgi-bin/downloadfile.cgi on FiberHome HG2201T 1.00.M5007_JS_201804 devices allows pre-authentication Directory Traversal for reading arbitrary files. |
| CVE-2019-17186 | /var/WEB-GUI/cgi-bin/telnet.cgi on FiberHome HG2201T 1.00.M5007_JS_201804 devices allows pre-authentication remote code execution. |
| CVE-2019-16893 | The Web Management of TP-Link TP-SG105E V4 1.0.0 Build 20181120 devices allows an unauthenticated attacker to reboot the device via a reboot.cgi request. |
| CVE-2019-16340 | Belkin Linksys Velop 1.1.8.192419 devices allows remote attackers to discover the recovery key via a direct request for the /sysinfo_json.cgi URI. |
| CVE-2019-16200 | GNU Serveez through 0.2.2 has an Information Leak. An attacker may send an HTTP POST request to the /cgi-bin/reader URI. The attacker must include a Content-length header with a large positive value that, when represented in 32 bit binary, evaluates to a negative number. The problem exists in the http_cgi_write function under http-cgi.c; however, exploitation might show svz_envblock_add in libserveez/passthrough.c as the location of the heap-based buffer over-read. |
| CVE-2019-16072 | An OS command injection vulnerability in the discover_and_manage CGI script in NETSAS Enigma NMS 65.0.0 and prior allows an attacker to execute arbitrary code because of improper neutralization of shell metacharacters in the ip_address variable within an snmp_browser action. |
| CVE-2019-16068 | A CSRF vulnerability exists in NETSAS ENIGMA NMS version 65.0.0 and prior that could allow an attacker to be able to trick a victim into submitting a malicious manage_files.cgi request. This can be triggered via XSS or an IFRAME tag included within the site. |
| CVE-2019-16065 | A remote SQL injection web vulnerability was discovered in the Enigma NMS 65.0.0 and prior web application that allows an attacker to execute SQL commands to expose and compromise the web server, expose database tables and values, and potentially execute system-based commands as the mysql user. This affects the search_pattern value of the manage_hosts_short.cgi script. |
| CVE-2019-16057 | The login_mgr.cgi script in D-Link DNS-320 through 2.05.B10 is vulnerable to remote command injection. |
| CVE-2019-15642 | rpc.cgi in Webmin through 1.920 allows authenticated Remote Code Execution via a crafted object name because unserialise_variable makes an eval call. NOTE: the Webmin_Servers_Index documentation states "RPC can be used to run any command or modify any file on a server, which is why access to it must not be granted to un-trusted Webmin users." |
| CVE-2019-15641 | xmlrpc.cgi in Webmin through 1.930 allows authenticated XXE attacks. By default, only root, admin, and sysadm can access xmlrpc.cgi. |
| CVE-2019-15503 | cgi-cpn/xcoding/prontus_videocut.cgi in AltaVoz Prontus (aka ProntusCMS) through 12.0.3.0 has "Improper Neutralization of Special Elements used in an OS Command," allowing attackers to execute OS commands via an HTTP GET parameter. |
| CVE-2019-15498 | cgi-bin/cmh/webcam.sh in Vera Edge Home Controller 1.7.4452 allows remote unauthenticated users to execute arbitrary OS commands via --output argument injection in the username parameter to /cgi-bin/cmh/webcam.sh. |
| CVE-2019-15107 | An issue was discovered in Webmin <=1.920. The parameter old in password_change.cgi contains a command injection vulnerability. |
| CVE-2019-15072 | The login feature in "/cgi-bin/portal" in MAIL2000 through version 6.0 and 7.0 has a cross-site scripting (XSS) vulnerability, allowing execution of arbitrary code via any parameter. This vulnerability affects many mail system of governments, organizations, companies and universities. |
| CVE-2019-15071 | The "/cgi-bin/go" page in MAIL2000 through version 6.0 and 7.0 has a cross-site scripting (XSS) vulnerability, allowing execution of arbitrary code via ACTION parameter without authentication. The code can executed for any user accessing the page. This vulnerability affects many mail system of governments, organizations, companies and universities. |
| CVE-2019-15051 | An issue was discovered in Softing uaGate (SI, MB, 840D) firmware through 1.71.00.1225. A CGI script is vulnerable to command injection via a maliciously crafted form parameter. |
| CVE-2019-14984 | eQ-3 Homematic CCU2 and CCU3 with the XML-API through 1.2.0 AddOn installed allow Remote Code Execution by unauthenticated attackers with access to the web interface, because the undocumented addons/xmlapi/exec.cgi script uses CMD_EXEC to execute TCL code from a POST request. |
| CVE-2019-14979 | ** DISPUTED ** cgi-bin/webscr?cmd=_cart in the WooCommerce PayPal Checkout Payment Gateway plugin 1.6.17 for WordPress allows Parameter Tampering in an amount parameter (such as amount_1), as demonstrated by purchasing an item for lower than the intended price. NOTE: The plugin author states it is true that the amount can be manipulated in the PayPal payment flow. However, the amount is validated against the WooCommerce order total before completing the order, and if it doesn’t match then the order will be left in an “On Hold” state. |
| CVE-2019-14698 | An issue was discovered on MicroDigital N-series cameras with firmware through 6400.0.8.5. In a CGI program running under the HTTPD web server, a buffer overflow in the param parameter leads to remote code execution in the context of the nobody account. |
| CVE-2019-14338 | An issue was discovered on D-Link 6600-AP and DWL-3600AP Ax 4.2.0.14 21/03/2019 devices. There is a post-authentication admin.cgi?action= XSS vulnerability on the management interface. |
| CVE-2019-14336 | An issue was discovered on D-Link 6600-AP and DWL-3600AP Ax 4.2.0.14 21/03/2019 devices. There is post-authenticated dump of all of the config files through a certain admin.cgi?action= insecure HTTP request. |
| CVE-2019-14335 | An issue was discovered on D-Link 6600-AP and DWL-3600AP Ax 4.2.0.14 21/03/2019 devices. There is post-authenticated denial of service leading to the reboot of the AP via the admin.cgi?action=%s URI. |
| CVE-2019-14334 | An issue was discovered on D-Link 6600-AP, DWL-3600AP, and DWL-8610AP Ax 4.2.0.14 21/03/2019 devices. There is post-authenticated Certificate and RSA Private Key extraction through an insecure sslcert-get.cgi HTTP command. |
| CVE-2019-14333 | An issue was discovered on D-Link 6600-AP and DWL-3600AP Ax 4.2.0.14 21/03/2019 devices. There is a pre-authenticated denial of service attack against the access point via a long action parameter to admin.cgi. |
| CVE-2019-13565 | An issue was discovered in OpenLDAP 2.x before 2.4.48. When using SASL authentication and session encryption, and relying on the SASL security layers in slapd access controls, it is possible to obtain access that would otherwise be denied via a simple bind for any identity covered in those ACLs. After the first SASL bind is completed, the sasl_ssf value is retained for all new non-SASL connections. Depending on the ACL configuration, this can affect different types of operations (searches, modifications, etc.). In other words, a successful authorization step completed by one user affects the authorization requirement for a different user. |
| CVE-2019-13562 | D-Link DIR-655 C devices before 3.02B05 BETA03 allow XSS, as demonstrated by the /www/ping_response.cgi ping_ipaddr parameter, the /www/ping6_response.cgi ping6_ipaddr parameter, and the /www/apply_sec.cgi html_response_return_page parameter. |
| CVE-2019-13561 | D-Link DIR-655 C devices before 3.02B05 BETA03 allow remote attackers to execute arbitrary commands via shell metacharacters in the online_firmware_check.cgi check_fw_url parameter. |
| CVE-2019-13560 | D-Link DIR-655 C devices before 3.02B05 BETA03 allow remote attackers to force a blank password via the apply_sec.cgi setup_wizard parameter. |
| CVE-2019-13484 | In Xymon through 4.3.28, a buffer overflow exists in the status-log viewer CGI because of expansion in appfeed.c. |
| CVE-2019-13455 | In Xymon through 4.3.28, a stack-based buffer overflow vulnerability exists in the alert acknowledgment CGI tool because of expansion in acknowledge.c. |
| CVE-2019-13408 | A relative path traversal vulnerability found in Advan VD-1 firmware versions up to 230. It allows attackers to download arbitrary files via url cgibin/ExportSettings.cgi?Download=filepath, without any authentication. |
| CVE-2019-13407 | A XSS found in Advan VD-1 firmware versions up to 230. VD-1 responses a path error message when a requested resource was not found in page cgibin/ssi.cgi. It leads to a reflected XSS because the error message does not escape properly. |
| CVE-2019-13406 | A broken access control vulnerability found in Advan VD-1 firmware versions up to 230. An attacker can send a POST request to cgibin/ApkUpload.cgi to install arbitrary APK without any authentication. |
| CVE-2019-13405 | A broken access control vulnerability found in Advan VD-1 firmware version 230 leads to insecure ADB service. An attacker can send a POST request to cgibin/AdbSetting.cgi to enable ADB without any authentication then take the compromised device as a relay or to install mining software. |
| CVE-2019-13402 | /usr/sbin/default.sh and /usr/apache/htdocs/cgi-bin/admin/hardfactorydefault.cgi on Dynacolor FCM-MB40 v1.2.0.0 devices implement an incomplete factory-reset process. A backdoor can persist because neither system accounts nor the set of services is reset. |
| CVE-2019-13401 | Dynacolor FCM-MB40 v1.2.0.0 devices have CSRF in all scripts under cgi-bin/. |
| CVE-2019-13400 | Dynacolor FCM-MB40 v1.2.0.0 use /etc/appWeb/appweb.pass to store administrative web-interface credentials in cleartext. These credentials can be retrieved via cgi-bin/getuserinfo.cgi?mode=info. |
| CVE-2019-13398 | Dynacolor FCM-MB40 v1.2.0.0 devices allow remote attackers to execute arbitrary commands via a crafted parameter to a CGI script, as demonstrated by sed injection in cgi-bin/camctrl_save_profile.cgi (save parameter) and cgi-bin/ddns.cgi. |
| CVE-2019-13379 | On AVTECH Room Alert 3E devices before 2.2.5, an attacker with access to the device's web interface may escalate privileges from an unauthenticated user to administrator by performing a cmd.cgi?action=ResetDefaults&src=RA reset and using the default credentials to get in. |
| CVE-2019-13345 | The cachemgr.cgi web module of Squid through 4.7 has XSS via the user_name or auth parameter. |
| CVE-2019-13336 | The dbell Wi-Fi Smart Video Doorbell DB01-S Gen 1 allows remote attackers to launch commands with no authentication verification via TCP port 81, because the loginuse and loginpass parameters to openlock.cgi can have arbitrary values. NOTE: the vendor's position is that this product reached end of life in 2016. |
| CVE-2019-13276 | TRENDnet TEW-827DRU with firmware up to and including 2.04B03 contains a stack-based buffer overflow in the ssi binary. The overflow allows an unauthenticated user to execute arbitrary code by providing a sufficiently long query string when POSTing to any valid cgi, txt, asp, or js file. The vulnerability can be exercised on the local intranet or remotely if remote administration is enabled. |
| CVE-2019-13274 | In Xymon through 4.3.28, an XSS vulnerability exists in the csvinfo CGI script due to insufficient filtering of the db parameter. |
| CVE-2019-13273 | In Xymon through 4.3.28, a buffer overflow vulnerability exists in the csvinfo CGI script. The overflow may be exploited by sending a crafted GET request that triggers an sprintf of the srcdb parameter. |
| CVE-2019-13155 | An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the IP Address in Add Virtual Server. |
| CVE-2019-13154 | An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the TCP Ports To Open in Add Gaming Rule. |
| CVE-2019-13153 | An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the Private Port in Add Virtual Server. |
| CVE-2019-13152 | An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the IP Address in Add Gaming Rule. |
| CVE-2019-13151 | An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the action set_sta_enrollee_pin_5g and the key wps_sta_enrollee_pin. |
| CVE-2019-13150 | An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication). The command injection exists in the key ip_addr. |
| CVE-2019-13149 | An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the key passwd in Routing RIP Settings. |
| CVE-2019-13148 | An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the UDP Ports To Open in Add Gaming Rule. |
| CVE-2019-13028 | An incorrect implementation of a local web server in eID client (Windows version before 3.1.2, Linux version before 3.0.3) allows remote attackers to execute arbitrary code (.cgi, .pl, or .php) or delete arbitrary files via a crafted HTML page. This is a product from the Ministry of Interior of the Slovak Republic. |
| CVE-2019-12854 | Due to incorrect string termination, Squid cachemgr.cgi 4.0 through 4.7 may access unallocated memory. On systems with memory access protections, this can cause the CGI process to terminate unexpectedly, resulting in a denial of service for all clients using it. |
| CVE-2019-12840 | In Webmin through 1.910, any user authorized to the "Package Updates" module can execute arbitrary commands with root privileges via the data parameter to update.cgi. |
| CVE-2019-12771 | Command injection is possible in ThinStation through 6.1.1 via shell metacharacters after the cgi-bin/CdControl.cgi action= substring, or after the cgi-bin/VolControl.cgi OK= substring. |
| CVE-2019-12581 | A reflective Cross-site scripting (XSS) vulnerability in the free_time_failed.cgi CGI program in selected Zyxel ZyWall, USG, and UAG devices allows remote attackers to inject arbitrary web script or HTML via the err_msg parameter. |
| CVE-2019-12314 | Deltek Maconomy 2.2.5 is prone to local file inclusion via absolute path traversal in the WS.macx1.W_MCS/ PATH_INFO, as demonstrated by a cgi-bin/Maconomy/MaconomyWS.macx1.W_MCS/etc/passwd URI. |
| CVE-2019-12289 | An issue was discovered in upgrade_firmware.cgi on VStarcam 100T (C7824WIP) CH-sys-48.53.75.119~123 and 200V (C38S) CH-sys-48.53.203.119~123 devices. A remote command can be executed through a system firmware update without authentication. The attacker can modify the files within the internal firmware or even steal account information by executing a command. |
| CVE-2019-12288 | An issue was discovered in upgrade_htmls.cgi on VStarcam 100T (C7824WIP) KR75.8.53.20 and 200V (C38S) KR203.18.1.20 devices. The web service, network, and account files can be manipulated through a web UI firmware update without any authentication. The attacker can achieve access to the device through a manipulated web UI firmware update. |
| CVE-2019-11845 | An HTML Injection vulnerability has been discovered on the RICOH SP 4510DN via the /web/entry/en/address/adrsSetUserWizard.cgi entryNameIn parameter. |
| CVE-2019-11844 | An HTML Injection vulnerability has been discovered on the RICOH SP 4520DN via the /web/entry/en/address/adrsSetUserWizard.cgi entryNameIn or entryDisplayNameIn parameter. |
| CVE-2019-11689 | An issue was discovered in ASUSTOR exFAT Driver through 1.0.0.r20. When conducting license validation, exfat.cgi and exfatctl fail to properly validate server responses and pass unsanitized text to the system shell, resulting in code execution as root. |
| CVE-2019-11688 | An issue was discovered in ASUSTOR exFAT Driver through 1.0.0.r20. When conducting license validation, exfat.cgi and exfatctl accept any certificate for asustornasapi.asustor.com. In other words, there is Missing SSL Certificate Validation. |
| CVE-2019-11527 | An issue was discovered in Softing uaGate SI 1.60.01. A CGI script is vulnerable to command injection with a maliciously crafted url parameter. |
| CVE-2019-11418 | apply.cgi on the TRENDnet TEW-632BRP 1.010B32 router has a buffer overflow via long strings to the SOAPACTION:HNAP1 interface. |
| CVE-2019-11417 | system.cgi on TRENDnet TV-IP110WN cameras has a buffer overflow caused by an inadequate source-length check before a strcpy operation in the respondAsp function. Attackers can exploit the vulnerability by using the languse parameter with a long string. This affects 1.2.2 build 28, 64, 65, and 68. |
| CVE-2019-11064 | A vulnerability of remote credential disclosure was discovered in Advan VD-1 firmware versions up to 230. An attacker can export system configuration which is not encrypted to get the administrator’s account and password in plain text via cgibin/ExportSettings.cgi?Export=1 without any authentication. |
| CVE-2019-11017 | On D-Link DI-524 V2.06RU devices, multiple Stored and Reflected XSS vulnerabilities were found in the Web Configuration: /spap.htm, /smap.htm, and /cgi-bin/smap, as demonstrated by the cgi-bin/smap RC parameter. |
| CVE-2019-10904 | Roundup 1.6 allows XSS via the URI because frontends/roundup.cgi and roundup/cgi/wsgi_handler.py mishandle 404 errors. |
| CVE-2019-10887 | A reflected HTML injection vulnerability on Salicru SLC-20-cube3(5) devices running firmware version cs121-SNMP v4.54.82.130611 allows remote attackers to inject arbitrary HTML elements via a /DataLog.csv?log= or /AlarmLog.csv?log= or /waitlog.cgi?name= or /chart.shtml?data= or /createlog.cgi?name= request. |
| CVE-2019-10663 | Grandstream UCM6204 before 1.0.19.20 devices allow remote authenticated users to conduct SQL injection attacks via the sord parameter in a listCodeblueGroup API call to the /cgi? URI. |
| CVE-2019-10662 | Grandstream UCM6204 before 1.0.19.20 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the backupUCMConfig file-backup parameter to the /cgi? URI. |
| CVE-2019-10478 | An issue was discovered on Glory RBW-100 devices with firmware ISP-K05-02 7.0.0. An unrestricted file upload vulnerability in the Front Circle Controller glytoolcgi/settingfile_upload.cgi allows attackers to upload supplied data. This can be used to place attacker controlled code on the filesystem that can be executed and can lead to a reverse root shell. |
| CVE-2019-10041 | The D-Link DIR-816 A2 1.11 router only checks the random token when authorizing a goform request. An attacker can get this token from dir_login.asp and use an API URL /goform/form2userconfig.cgi to edit the system account without authentication. |
| CVE-2019-0232 | When running on Windows with enableCmdLineArguments enabled, the CGI Servlet in Apache Tomcat 9.0.0.M1 to 9.0.17, 8.5.0 to 8.5.39 and 7.0.0 to 7.0.93 is vulnerable to Remote Code Execution due to a bug in the way the JRE passes command line arguments to Windows. The CGI Servlet is disabled by default. The CGI option enableCmdLineArguments is disable by default in Tomcat 9.0.x (and will be disabled by default in all versions in response to this vulnerability). For a detailed explanation of the JRE behaviour, see Markus Wulftange's blog (https://codewhitesec.blogspot.com/2016/02/java-and-command-line-injections-in-windows.html) and this archived MSDN blog (https://web.archive.org/web/20161228144344/https://blogs.msdn.microsoft.com/twistylittlepassagesallalike/2011/04/23/everyone-quotes-command-line-arguments-the-wrong-way/). |
| CVE-2018-9285 | Main_Analysis_Content.asp in /apply.cgi on ASUS RT-AC66U, RT-AC68U, RT-AC86U, RT-AC88U, RT-AC1900, RT-AC2900, and RT-AC3100 devices before 3.0.0.4.384_10007; RT-N18U devices before 3.0.0.4.382.39935; RT-AC87U and RT-AC3200 devices before 3.0.0.4.382.50010; and RT-AC5300 devices before 3.0.0.4.384.20287 allows OS command injection via the pingCNT and destIP fields of the SystemCmd variable. |
| CVE-2018-9284 | authentication.cgi on D-Link DIR-868L devices with Singapore StarHub firmware before v1.21SHCb03 allows remote attackers to execute arbitrary code. |
| CVE-2018-9010 | Intelbras TELEFONE IP TIP200/200 LITE 60.0.75.29 devices allow remote authenticated admins to read arbitrary files via the /cgi-bin/cgiServer.exx page parameter, aka absolute path traversal. In some cases, authentication can be achieved via the admin account with its default admin password. |
| CVE-2018-8918 | Cross-site scripting (XSS) vulnerability in info.cgi in Synology Router Manager (SRM) before 1.1.7-6941 allows remote attackers to inject arbitrary web script or HTML via the host parameter. |
| CVE-2018-8917 | Cross-site scripting (XSS) vulnerability in info.cgi in Synology DiskStation Manager (DSM) before 6.1.6-15266 allows remote attackers to inject arbitrary web script or HTML via the host parameter. |
| CVE-2018-8712 | An issue was discovered in Webmin 1.840 and 1.880 when the default Yes setting of "Can view any file as a log file" is enabled. As a result of weak default configuration settings, limited users have full access rights to the underlying Unix system files, allowing the user to read sensitive data from the local system (using Local File Include) such as the '/etc/shadow' file via a "GET /syslog/save_log.cgi?view=1&file=/etc/shadow" request. |
| CVE-2018-8072 | An issue was discovered on EDIMAX IC-3140W through 3.06, IC-5150W through 3.09, and IC-6220DC through 3.06 devices. The ipcam_cgi binary contains a stack-based buffer overflow that is possible to trigger from a remote unauthenticated /camera-cgi/public/getsysyeminfo.cgi?action=VALUE_HERE HTTP request: if the VALUE_HERE length is more than 0x400 (1024), it is possible to overwrite other values located on the stack due to an incorrect use of the strcpy() function. |
| CVE-2018-7780 | In Schneider Electric Pelco Sarix Professional 1st generation cameras with firmware versions prior to 3.29.69, a buffer overflow vulnerability exist in cgi program "set". |
| CVE-2018-7760 | An authorization bypass vulnerability exists in Schneider Electric's Modicon M340, Modicon Premium, Modicon Quantum PLC, BMXNOR0200. Requests to CGI functions allow malicious users to bypass authorization. |
| CVE-2018-7649 | Monitorix before 3.10.1 allows XSS via CGI variables. |
| CVE-2018-7230 | A XML external entity (XXE) vulnerability exists in the import.cgi of the web interface component of the Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67. |
| CVE-2018-6530 | OS command injection vulnerability in soap.cgi (soapcgi_main in cgibin) in D-Link DIR-880L DIR-880L_REVA_FIRMWARE_PATCH_1.08B04 and previous versions, DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-65L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to execute arbitrary OS commands via the service parameter. |
| CVE-2018-6529 | XSS vulnerability in htdocs/webinc/js/bsc_sms_inbox.php in D-Link DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-865L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to read a cookie via a crafted Treturn parameter to soap.cgi. |
| CVE-2018-6528 | XSS vulnerability in htdocs/webinc/body/bsc_sms_send.php in D-Link DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-865L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to read a cookie via a crafted receiver parameter to soap.cgi. |
| CVE-2018-6527 | XSS vulnerability in htdocs/webinc/js/adv_parent_ctrl_map.php in D-Link DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-865L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to read a cookie via a crafted deviceid parameter to soap.cgi. |
| CVE-2018-6408 | An issue was discovered on Conceptronic CIPCAMPTIWL V3 0.61.30.21 devices. CSRF exists in hy-cgi/user.cgi, as demonstrated by changing an administrator password or adding a new administrator account. |
| CVE-2018-6407 | An issue was discovered on Conceptronic CIPCAMPTIWL V3 0.61.30.21 devices. An unauthenticated attacker can crash a device by sending a POST request with a huge body size to /hy-cgi/devices.cgi?cmd=searchlandevice. The crash completely freezes the device. |
| CVE-2018-6320 | A vulnerability has been discovered in login.cgi in Pulse Secure Pulse Connect Secure (PCS) 8.1RX before 8.1R12 and 8.3RX before 8.3R2 and Pulse Policy Secure (PPS) 5.2RX before 5.2R9 and 5.4RX before 5.4R2 wherein an http(s) Host header received from the browser is trusted without validation. |
| CVE-2018-6211 | On D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, OS command injection is possible as a result of incorrect processing of the res_buf parameter to index.cgi. |
| CVE-2018-6193 | A Cross-Site Scripting (XSS) vulnerability was found in Routers2 2.24, affecting the 'rtr' GET parameter in a page=graph action to cgi-bin/routers2.pl. |
| CVE-2018-6000 | An issue was discovered in AsusWRT before 3.0.0.4.384_10007. The do_vpnupload_post function in router/httpd/web.c in vpnupload.cgi provides functionality for setting NVRAM configuration values, which allows attackers to set the admin password and launch an SSH daemon (or enable infosvr command mode), and consequently obtain remote administrative access, via a crafted request. This is available to unauthenticated attackers in conjunction with CVE-2018-5999. |
| CVE-2018-5757 | An issue was discovered on AudioCodes 450HD IP Phone devices with firmware 3.0.0.535.106. The traceroute and ping functionality, which uses a parameter in a request to command.cgi from the Monitoring page in the web UI, unsafely puts user-alterable data directly into an OS command, leading to Remote Code Execution via shell metacharacters in the query string. |
| CVE-2018-5728 | Cobham Sea Tel 121 build 222701 devices allow remote attackers to obtain potentially sensitive information via a /cgi-bin/getSysStatus request, as demonstrated by the Latitude/Longitude of the ship, or satellite details. |
| CVE-2018-5724 | MASTER IPCAMERA01 3.3.4.2103 devices allow Unauthenticated Configuration Download and Upload, as demonstrated by restore.cgi. |
| CVE-2018-5123 | A third party website can access information available to a user with access to a restricted bug entry using the image generation in report.cgi in all Bugzilla versions prior to 4.4. |
| CVE-2018-4073 | An exploitable Permission Assignment vulnerability exists in the ACEManager EmbeddedAceSet_Task.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. The the binary the endpoint /cgi-bin/Embeded_Ace_TLSet_Task.cgi is a very similar endpoint that is designed for use with setting table values that can cause an arbitrary setting writes, resulting in the unverified changes to any system setting. An attacker can make an authenticated HTTP request, or run the binary as any user, to trigger this vulnerability. |
| CVE-2018-4072 | An exploitable Permission Assignment vulnerability exists in the ACEManager EmbeddedAceSet_Task.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. The EmbeddedAceSet_Task.cgi executable is used to change MSCII configuration values within the configuration manager of the AirLink ES450. This binary does not have any restricted configuration settings, so once the MSCIID is discovered, any authenticated user can send configuration changes using the /cgi-bin/Embedded_Ace_Set_Task.cgi endpoint. |
| CVE-2018-4071 | An exploitable Information Disclosure vulnerability exists in the ACEManager EmbeddedAceGet_Task.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. The EmbeddedAceTLGet_Task.cgi executable is used to retrieve MSCII configuration values within the configuration manager of the AirLink ES450. This binary does not have any restricted configuration settings, so once the MSCIID is discovered, any authenticated user can send configuration changes using the /cgi-bin/Embedded_Ace_TLGet_Task.cgi endpoint. |
| CVE-2018-4070 | An exploitable Information Disclosure vulnerability exists in the ACEManager EmbeddedAceGet_Task.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. This binary does not have any restricted configuration settings, so once the MSCIID is discovered, any authenticated user can send configuration changes using the /cgi-bin/Embedded_Ace_Get_Task.cgi endpoint. |
| CVE-2018-4067 | An exploitable information disclosure vulnerability exists in the ACEManager template_load.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. A specially crafted HTTP request can cause a information leak, resulting in the disclosure of internal paths and files. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2018-4065 | An exploitable cross-site scripting vulnerability exists in the ACEManager ping_result.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. A specially crafted HTTP ping request can cause reflected javascript code execution, resulting in the execution of javascript code running on the victim's browser. An attacker can get a victim to click a link, or embedded URL, that redirects to the reflected cross-site scripting vulnerability to trigger this vulnerability. |
| CVE-2018-4064 | An exploitable unverified password change vulnerability exists in the ACEManager upload.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. A specially crafted HTTP request can cause a unverified device configuration change, resulting in an unverified change of the user password on the device. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2018-4063 | An exploitable remote code execution vulnerability exists in the upload.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. A specially crafted HTTP request can upload a file, resulting in executable code being uploaded, and routable, to the webserver. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| CVE-2018-4061 | An exploitable command injection vulnerability exists in the ACEManager iplogging.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. A specially crafted HTTP request can inject arbitrary commands, resulting in arbitrary command execution. An attacker can send an authenticated HTTP request to trigger this vulnerability. |
| CVE-2018-3955 | An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object. |
| CVE-2018-3954 | Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAMData entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object. |
| CVE-2018-3953 | Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAM. Data entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal, it enters a code path that continues until it reaches offset 0x0042B5C4 in the 'start_lltd' function. Within the 'start_lltd' function, a 'nvram_get' call is used to obtain the value of the user-controlled 'machine_name' NVRAM entry. This value is then entered directly into a command intended to write the host name to a file and subsequently executed. |
| CVE-2018-3938 | An exploitable stack-based buffer overflow vulnerability exists in the 802dot1xclientcert.cgi functionality of Sony IPELA E Series Camera G5 firmware 1.87.00. A specially crafted POST can cause a stack-based buffer overflow, resulting in remote code execution. An attacker can send a malicious POST request to trigger this vulnerability. |
| CVE-2018-3813 | getConfigExportFile.cgi on FLIR Brickstream 2300 devices 2.0 4.1.53.166 has Incorrect Access Control, as demonstrated by reading the AVI_USER_ID and AVI_USER_PASSWORD fields via a direct request. |
| CVE-2018-25101 | A vulnerability, which was classified as problematic, has been found in l2c2technologies Koha up to 20180108. This issue affects some unknown processing of the file /cgi-bin/koha/opac-MARCdetail.pl. The manipulation of the argument biblionumber with the input 2"><TEST> leads to cross site scripting. The attack may be initiated remotely. The identifier of the patch is 950fc8e101886821879066b33e389a47fb0a9782. It is recommended to upgrade the affected component. The identifier VDB-261677 was assigned to this vulnerability. |
| CVE-2018-25087 | A vulnerability classified as problematic was found in Arborator Server. This vulnerability affects the function start of the file project.cgi. The manipulation of the argument project leads to denial of service. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The patch is identified as cdbdbcbd491db65e9d697ab4365605fdfab1a604. It is recommended to apply a patch to fix this issue. VDB-230662 is the identifier assigned to this vulnerability. |
| CVE-2018-20913 | cPanel before 70.0.23 allows attackers to read the root accesshash via the WHM /cgi/trustclustermaster.cgi (SEC-364). |
| CVE-2018-20814 | An XSS issue was found with Psaldownload.cgi in Pulse Secure Pulse Connect Secure (PCS) 8.3R2 before 8.3R2 and Pulse Policy Secure (PPS) 5.4RX before 5.4R2. This is not applicable to PCS 8.1RX or PPS 5.2RX. |
| CVE-2018-20813 | An input validation issue has been found with login_meeting.cgi in Pulse Secure Pulse Connect Secure 8.3RX before 8.3R2. |
| CVE-2018-20808 | An XSS issue has been found with rd.cgi in Pulse Secure Pulse Connect Secure 8.3RX before 8.3R3 due to improper header sanitization. This is not applicable to 8.1RX. |
| CVE-2018-20807 | An XSS issue has been found in welcome.cgi in Pulse Secure Pulse Connect Secure (PCS) 8.1.x before 8.1R12, 8.2.x before 8.2R9, and 8.3.x before 8.3R3 due to one of the URL parameters not being sanitized properly. |
| CVE-2018-20577 | Orange Livebox 00.96.320S devices allow cgi-bin/restore.exe, cgi-bin/firewall_SPI.exe, cgi-bin/setup_remote_mgmt.exe, cgi-bin/setup_pass.exe, and cgi-bin/upgradep.exe CSRF. This is related to Firmware 01.11.2017-11:43:44, Boot v0.70.03, Modem 5.4.1.10.1.1A, Hardware 02, and Arcadyan ARV7519RW22-A-L T VR9 1.2. |
| CVE-2018-20576 | Orange Livebox 00.96.320S devices allow cgi-bin/autodialing.exe and cgi-bin/phone_test.exe CSRF, leading to arbitrary outbound telephone calls to an attacker-specified telephone number. This is related to Firmware 01.11.2017-11:43:44, Boot v0.70.03, Modem 5.4.1.10.1.1A, Hardware 02, and Arcadyan ARV7519RW22-A-L T VR9 1.2. |
| CVE-2018-20377 | Orange Livebox 00.96.320S devices allow remote attackers to discover Wi-Fi credentials via /get_getnetworkconf.cgi on port 8080, leading to full control if the admin password equals the Wi-Fi password or has the default admin value. This is related to Firmware 01.11.2017-11:43:44, Boot v0.70.03, Modem 5.4.1.10.1.1A, Hardware 02, and Arcadyan ARV7519RW22-A-L T VR9 1.2. |
| CVE-2018-20369 | Barracuda Message Archiver 2018 has XSS in the error_msg exception-handling value for the ldap_user parameter to the cgi-mod/ldap_load_entry.cgi module. The injection point of the issue is the Add_Update module. |
| CVE-2018-20356 | An invalid read of 8 bytes due to a use-after-free vulnerability in the mg_http_free_proto_data_cgi function call in mongoose.c in Cesanta Mongoose Embedded Web Server Library 6.13 and earlier allows a denial of service (application crash) or remote code execution. |
| CVE-2018-20355 | An invalid write of 8 bytes due to a use-after-free vulnerability in the mg_http_free_proto_data_cgi function call in mongoose.c in Cesanta Mongoose Embedded Web Server Library 6.13 and earlier allows a denial of service (application crash) or remote code execution. |
| CVE-2018-20352 | Use-after-free vulnerability in the mg_cgi_ev_handler function in mongoose.c in Cesanta Mongoose Embedded Web Server Library 6.13 and earlier allows a denial of service (application crash) or remote code execution. |
| CVE-2018-20326 | ChinaMobile PLC Wireless Router GPN2.4P21-C-CN devices with firmware W2001EN-00 have XSS via the cgi-bin/webproc?getpage=html/index.html var:subpage parameter. |
| CVE-2018-20305 | D-Link DIR-816 A2 1.10 B05 devices allow arbitrary remote code execution without authentication via the newpass parameter. In the /goform/form2userconfig.cgi handler function, a long password may lead to a stack-based buffer overflow and overwrite a return address. |
| CVE-2018-20193 | Certain Secure Access SA Series SSL VPN products (originally developed by Juniper Networks but now sold and supported by Pulse Secure, LLC) allow privilege escalation, as demonstrated by Secure Access SSL VPN SA-4000 5.1R5 (build 9627) 4.2 Release (build 7631). This occurs because appropriate controls are not performed. Specifically, it is possible for a readonly user to change the administrator user password by making a local copy of the /dana-admin/user/update.cgi page, changing the "user" value, and saving the changes. |
| CVE-2018-20122 | The web interface on FASTGate Fastweb devices with firmware through 0.00.47_FW_200_Askey 2017-05-17 (software through 1.0.1b) exposed a CGI binary that is vulnerable to a command injection vulnerability that can be exploited to achieve remote code execution with root privileges. No authentication is required in order to trigger the vulnerability. |
| CVE-2018-20114 | On D-Link DIR-818LW Rev.A 2.05.B03 and DIR-860L Rev.B 2.03.B03 devices, unauthenticated remote OS command execution can occur in the soap.cgi service of the cgibin binary via an "&&" substring in the service parameter. NOTE: this issue exists because of an incomplete fix for CVE-2018-6530. |
| CVE-2018-19879 | An issue was discovered in /cgi-bin/luci on Teltonika RTU9XX (e.g., RUT950) R_31.04.89 before R_00.05.00.5 devices. The authentication functionality is not protected from automated tools used to make login attempts to the application. An anonymous attacker has the ability to make unlimited login attempts with an automated tool. This ability could lead to cracking a targeted user's password. |
| CVE-2018-19753 | Tarantella Enterprise before 3.11 allows Directory Traversal. |
| CVE-2018-19646 | The Python CGI scripts in PWS in Imperva SecureSphere 13.0.10, 13.1.10, and 13.2.10 allow remote attackers to execute arbitrary OS commands because command-line arguments are mishandled. |
| CVE-2018-19630 | cgi_handle_request in uhttpd in OpenWrt through 18.06.1 and LEDE through 17.01 has unauthenticated reflected XSS via the URI, as demonstrated by a cgi-bin/?[XSS] URI. |
| CVE-2018-19242 | Buffer overflow in apply.cgi on TRENDnet TEW-632BRP 1.010B32 and TEW-673GRU devices allows attackers to hijack the control flow to any attacker-specified location by crafting a POST request payload (with authentication). |
| CVE-2018-19241 | Buffer overflow in video.cgi on TRENDnet TV-IP110WN V1.2.2 build 68, V1.2.2.65, and V1.2.2 build 64 and TV-IP121WN V1.2.2 build 28 devices allows attackers to hijack the control flow to any attacker-specified location by crafting a POST request payload (without authentication). |
| CVE-2018-19240 | Buffer overflow in network.cgi on TRENDnet TV-IP110WN V1.2.2 build 68, V1.2.2.65, and V1.2.2 build 64 and TV-IP121WN V1.2.2 build 28 devices allows attackers to hijack the control flow to any attacker-specified location by crafting a POST request payload (without authentication). |
| CVE-2018-19239 | TRENDnet TEW-673GRU v1.00b40 devices have an OS command injection vulnerability in the start_arpping function of the timer binary, which allows remote attackers to execute arbitrary commands via three parameters (dhcpd_start, dhcpd_end, and lan_ipaddr) passed to the apply.cgi binary through a POST request. |
| CVE-2018-19191 | Webmin 1.890 has XSS via /config.cgi?webmin, the /shell/index.cgi history parameter, /shell/index.cgi?stripped=1, or the /webminlog/search.cgi uall or mall parameter. |
| CVE-2018-18852 | Cerio DT-300N 1.1.6 through 1.1.12 devices allow OS command injection because of improper input validation of the web-interface PING feature's use of Save.cgi to execute a ping command, as exploited in the wild in October 2018. |
| CVE-2018-18636 | XSS exists in cgi-bin/webcm on D-link DSL-2640T routers via the var:RelaodHref or var:conid parameter. |
| CVE-2018-18441 | D-Link DCS series Wi-Fi cameras expose sensitive information regarding the device configuration. The affected devices include many of DCS series, such as: DCS-936L, DCS-942L, DCS-8000LH, DCS-942LB1, DCS-5222L, DCS-825L, DCS-2630L, DCS-820L, DCS-855L, DCS-2121, DCS-5222LB1, DCS-5020L, and many more. There are many affected firmware versions starting from 1.00 and above. The configuration file can be accessed remotely through: <Camera-IP>/common/info.cgi, with no authentication. The configuration file include the following fields: model, product, brand, version, build, hw_version, nipca version, device name, location, MAC address, IP address, gateway IP address, wireless status, input/output settings, speaker, and sensor settings. |
| CVE-2018-18291 | A cross site scripting (XSS) vulnerability on ASUS RT-AC58U 3.0.0.4.380_6516 devices allows remote attackers to inject arbitrary web script or HTML via Advanced_ASUSDDNS_Content.asp, Advanced_WSecurity_Content.asp, Advanced_Wireless_Content.asp, Logout.asp, Main_Login.asp, MobileQIS_Login.asp, QIS_wizard.htma, YandexDNS.asp, ajax_status.xml, apply.cgi, clients.asp, disk.asp, disk_utility.asp, or internet.asp. |
| CVE-2018-18208 | Virtualmin 6.03 allows XSS via the query string, as demonstrated by the webmin_search.cgi URI. |
| CVE-2018-18207 | Virtualmin 6.03 allows Frame Injection via the settings-editor_read.cgi file parameter. |
| CVE-2018-18004 | Incorrect Access Control in mod_inetd.cgi in VIVOTEK Network Camera Series products with firmware before XXXXXX-VVTK-0X09a allows remote attackers to enable arbitrary system services via a URL parameter. |
| CVE-2018-17989 | A stored XSS vulnerability exists in the web interface on D-Link DSL-3782 devices with firmware 1.01 that allows authenticated attackers to inject a JavaScript or HTML payload inside the ACL page. The injected payload would be executed in a user's browser when "/cgi-bin/New_GUI/Acl.asp" is requested. |
| CVE-2018-17879 | An issue was discovered on certain ABUS TVIP cameras. The CGI scripts allow remote attackers to execute code via system() as root. There are several injection points in various scripts. |
| CVE-2018-17867 | The Port Forwarding functionality on DASAN H660GW devices allows remote attackers to execute arbitrary code via shell metacharacters in the cgi-bin/adv_nat_virsvr.asp Addr parameter (aka the Local IP Address field). |
| CVE-2018-17786 | On D-Link DIR-823G devices, ExportSettings.sh, upload_settings.cgi, GetDownLoadSyslog.sh, and upload_firmware.cgi do not require authentication, which allows remote attackers to execute arbitrary code. |
| CVE-2018-17564 | A Malformed Input String to /cgi-bin/delete_CA on Grandstream GXP16xx VoIP 1.0.4.128 phones allows attackers to delete configuration parameters and gain admin access to the device. |
| CVE-2018-17563 | A Malformed Input String to /cgi-bin/api-get_line_status on Grandstream GXP16xx VoIP 1.0.4.128 phones allows attackers to dump the device's configuration in cleartext. |
| CVE-2018-17558 | Hardcoded manufacturer credentials and an OS command injection vulnerability in the /cgi-bin/mft/ directory on ABUS TVIP TVIP20050 LM.1.6.18, TVIP10051 LM.1.6.18, TVIP11050 MG.1.6.03.05, TVIP20550 LM.1.6.18, TVIP10050 LM.1.6.18, TVIP11550 MG.1.6.03, TVIP21050 MG.1.6.03, and TVIP51550 MG.1.6.03 cameras allow remote attackers to execute code as root. |
| CVE-2018-17542 | SQL Injection exists in MailSherlock before 1.5.235 for OAKlouds allows an unauthenticated user to extract the subjects of the emails of other users within the enterprise via the select_mid parameter in an letgo.cgi request. |
| CVE-2018-17533 | Teltonika RUT9XX routers with firmware before 00.05.01.1 are prone to cross-site scripting vulnerabilities in hotspotlogin.cgi due to insufficient user input sanitization. |
| CVE-2018-17532 | Teltonika RUT9XX routers with firmware before 00.04.233 are prone to multiple unauthenticated OS command injection vulnerabilities in autologin.cgi and hotspotlogin.cgi due to insufficient user input sanitization. This allows remote attackers to execute arbitrary commands with root privileges. |
| CVE-2018-17316 | On the RICOH MP C6003 printer, HTML Injection and Stored XSS vulnerabilities have been discovered in the area of adding addresses via the entryNameIn parameter to /web/entry/en/address/adrsSetUserWizard.cgi. |
| CVE-2018-17315 | On the RICOH MP C2003 printer, HTML Injection and Stored XSS vulnerabilities have been discovered in the area of adding addresses via the entryNameIn parameter to /web/entry/en/address/adrsSetUserWizard.cgi. |
| CVE-2018-17314 | On the RICOH Aficio MP 305+ printer, HTML Injection and Stored XSS vulnerabilities have been discovered in the area of adding addresses via the entryNameIn parameter to /web/entry/en/address/adrsSetUserWizard.cgi. |
| CVE-2018-17313 | On the RICOH MP C307 printer, HTML Injection and Stored XSS vulnerabilities have been discovered in the area of adding addresses via the entryNameIn parameter to /web/entry/en/address/adrsSetUserWizard.cgi. |
| CVE-2018-17312 | On the RICOH Aficio MP 301 printer, HTML Injection and Stored XSS vulnerabilities have been discovered in the area of adding addresses via the entryNameIn parameter to /web/entry/en/address/adrsSetUserWizard.cgi. |
| CVE-2018-17311 | On the RICOH MP C6503 Plus printer, HTML Injection and Stored XSS vulnerabilities have been discovered in the area of adding addresses via the entryNameIn parameter to /web/entry/en/address/adrsSetUserWizard.cgi. |
| CVE-2018-17310 | On the RICOH MP C1803 JPN printer, HTML Injection and Stored XSS vulnerabilities have been discovered in the area of adding addresses via the entryNameIn parameter to /web/entry/en/address/adrsSetUserWizard.cgi. |
| CVE-2018-17309 | On the RICOH MP C406Z printer, HTML Injection and Stored XSS vulnerabilities have been discovered in the area of adding addresses via the entryNameIn parameter to /web/entry/en/address/adrsSetUserWizard.cgi. |
| CVE-2018-17208 | Linksys Velop 1.1.2.187020 devices allow unauthenticated command injection, providing an attacker with full root access, via cgi-bin/zbtest.cgi or cgi-bin/zbtest2.cgi (scripts that can be discovered with binwalk on the firmware, but are not visible in the web interface). This occurs because shell metacharacters in the query string are mishandled by ShellExecute, as demonstrated by the zbtest.cgi?cmd=level&level= substring. This can also be exploited via CSRF. |
| CVE-2018-17153 | It was discovered that the Western Digital My Cloud device before 2.30.196 is affected by an authentication bypass vulnerability. An unauthenticated attacker can exploit this vulnerability to authenticate as an admin user without needing to provide a password, thereby gaining full control of the device. (Whenever an admin logs into My Cloud, a server-side session is created that is bound to the user's IP address. After the session is created, it is possible to call authenticated CGI modules by sending the cookie username=admin in the HTTP request. The invoked CGI will check if a valid session is present and bound to the user's IP address.) It was found that it is possible for an unauthenticated attacker to create a valid session without a login. The network_mgr.cgi CGI module contains a command called "cgi_get_ipv6" that starts an admin session -- tied to the IP address of the user making the request -- if the additional parameter "flag" with the value "1" is provided. Subsequent invocation of commands that would normally require admin privileges now succeed if an attacker sets the username=admin cookie. |
| CVE-2018-17127 | blocking_request.cgi on ASUS GT-AC5300 devices through 3.0.0.4.384_32738 allows remote attackers to cause a denial of service (NULL pointer dereference and device crash) via a request that lacks a timestap parameter. |
| CVE-2018-17066 | An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/form2systime.cgi route. This could lead to command injection via shell metacharacters in the datetime parameter. |
| CVE-2018-17022 | Stack-based buffer overflow on the ASUS GT-AC5300 router through 3.0.0.4.384_32738 allows remote attackers to cause a denial of service (device crash) or possibly have unspecified other impact by setting a long sh_path0 value and then sending an appGet.cgi?hook=select_list("Storage_x_SharedPath") request, because ej_select_list in router/httpd/web.c uses strcpy. |
| CVE-2018-17021 | Cross-site scripting (XSS) vulnerability on ASUS GT-AC5300 devices with firmware through 3.0.0.4.384_32738 allows remote attackers to inject arbitrary web script or HTML via the appGet.cgi hook parameter. |
| CVE-2018-17002 | On the RICOH MP 2001 printer, HTML Injection and Stored XSS vulnerabilities have been discovered in the area of adding addresses via the entryNameIn parameter to /web/entry/en/address/adrsSetUserWizard.cgi. |
| CVE-2018-17001 | On the RICOH SP 4510SF printer, HTML Injection and Stored XSS vulnerabilities have been discovered in the area of adding addresses via the entryNameIn parameter to /web/entry/en/address/adrsSetUserWizard.cgi. |
| CVE-2018-16739 | An issue was discovered on certain ABUS TVIP devices. Due to a path traversal in /opt/cgi/admin/filewrite, an attacker can write to files, and thus execute code arbitrarily with root privileges. |
| CVE-2018-16717 | A heap-based buffer overflow exists in nph-viewgif.cgi in the 2.0.7 through 2.2.26 legacy versions of the NCBI ToolBox. |
| CVE-2018-16716 | A path traversal vulnerability exists in viewcgi.c in the 2.0.7 through 2.2.26 legacy versions of the NCBI ToolBox, which may result in reading of arbitrary files (i.e., significant information disclosure) or file deletion via the nph-viewgif.cgi query string. |
| CVE-2018-16591 | FURUNO FELCOM 250 and 500 devices allow unauthenticated users to change the password for the Admin, Log and Service accounts, as well as the password for the protected "SMS" panel via /cgi-bin/sm_changepassword.cgi and /cgi-bin/sm_sms_changepasswd.cgi. |
| CVE-2018-16585 | ** DISPUTED ** An issue was discovered in Artifex Ghostscript before 9.24. The .setdistillerkeys PostScript command is accepted even though it is not intended for use during document processing (e.g., after the startup phase). This leads to memory corruption, allowing remote attackers able to supply crafted PostScript to crash the interpreter or possibly have unspecified other impact. Note: A reputable source believes that the CVE is potentially a duplicate of CVE-2018-15910 as explained in Red Hat bugzilla (https://bugzilla.redhat.com/show_bug.cgi?id=1626193). |
| CVE-2018-16232 | An authenticated command injection vulnerability exists in IPFire Firewall before 2.21 Core Update 124 in backup.cgi. This allows an authenticated user with privileges for the affected page to execute arbitrary commands. |
| CVE-2018-15884 | RICOH MP C4504ex devices allow HTML Injection via the /web/entry/en/address/adrsSetUserWizard.cgi entryNameIn parameter. |
| CVE-2018-15745 | Argus Surveillance DVR 4.0.0.0 devices allow Unauthenticated Directory Traversal, leading to File Disclosure via a ..%2F in the WEBACCOUNT.CGI RESULTPAGE parameter. |
| CVE-2018-15698 | ASUSTOR Data Master 3.1.5 and below allows authenticated remote non-administrative users to read any file on the file system when providing the full path to loginimage.cgi. |
| CVE-2018-15696 | ASUSTOR Data Master 3.1.5 and below allows authenticated remote non-administrative users to enumerate all user accounts via user.cgi. |
| CVE-2018-15695 | ASUSTOR Data Master 3.1.5 and below allows authenticated remote non-administrative users to delete any file on the file system due to a path traversal vulnerability in wallpaper.cgi. |
| CVE-2018-15529 | A command injection vulnerability in maintenance.cgi in Mutiny "Monitoring Appliance" before 6.1.0-5263 allows authenticated users, with access to the admin interface, to inject arbitrary commands within the filename of a system upgrade upload. |
| CVE-2018-14912 | cgit_clone_objects in CGit before 1.2.1 has a directory traversal vulnerability when `enable-http-clone=1` is not turned off, as demonstrated by a cgit/cgit.cgi/git/objects/?path=../ request. |
| CVE-2018-14771 | VIVOTEK FD8177 devices before XXXXXX-VVTK-xx06a allow remote attackers to execute arbitrary code (issue 2 of 2) via eventscript.cgi. |
| CVE-2018-14714 | System command injection in appGet.cgi on ASUS RT-AC3200 version 3.0.0.4.382.50010 allows attackers to execute system commands via the "load_script" URL parameter. |
| CVE-2018-14713 | Format string vulnerability in appGet.cgi on ASUS RT-AC3200 version 3.0.0.4.382.50010 allows attackers to read arbitrary sections of memory and CPU registers via the "hook" URL parameter. |
| CVE-2018-14712 | Buffer overflow in appGet.cgi on ASUS RT-AC3200 version 3.0.0.4.382.50010 allows attackers to inject system commands via the "hook" URL parameter. |
| CVE-2018-14711 | Missing cross-site request forgery protection in appGet.cgi on ASUS RT-AC3200 version 3.0.0.4.382.50010 allows attackers to cause state-changing actions with specially crafted URLs. |
| CVE-2018-14710 | Cross-site scripting in appGet.cgi on ASUS RT-AC3200 version 3.0.0.4.382.50010 allows attackers to execute JavaScript via the "hook" URL parameter. |
| CVE-2018-14496 | ** DISPUTED ** Vivotek FD8136 devices allow remote memory corruption and remote code execution because of a stack-based buffer overflow, related to sprintf, vlocal_buff_4326, and set_getparam.cgi. NOTE: The vendor has disputed this as a vulnerability and states that the issue does not cause a web server crash or have any other affect on it's performance. |
| CVE-2018-14429 | man-cgi before 1.16 allows Local File Inclusion via absolute path traversal, as demonstrated by a cgi-bin/man-cgi?/etc/passwd URI. |
| CVE-2018-14366 | download.cgi in Pulse Secure Pulse Connect Secure 8.1RX before 8.1R13 and 8.3RX before 8.3R4 and Pulse Policy Secure through 5.2RX before 5.2R10 and 5.4RX before 5.4R4 have an Open Redirect Vulnerability. |
| CVE-2018-14060 | OS command injection in the AP mode settings feature in /cgi-bin/luci /api/misystem/set_router_wifiap on Xiaomi R3D before 2.26.4 devices allows an attacker to execute any command via crafted JSON data. |
| CVE-2018-14010 | OS command injection in the guest Wi-Fi settings feature in /cgi-bin/luci on Xiaomi R3P before 2.14.5, R3C before 2.12.15, R3 before 2.22.15, and R3D before 2.26.4 devices allows an attacker to execute any command via crafted JSON data. |
| CVE-2018-13283 | Lack of administrator control over security vulnerability in client.cgi in Synology SSL VPN Client before 1.2.5-0226 allows remote attackers to conduct man-in-the-middle attacks via the (1) command, (2) hostname, or (3) port parameter. |
| CVE-2018-13032 | ECESSA ShieldLink SL175EHQ 10.7.4 devices have CSRF to add superuser accounts via the cgi-bin/pl_web.cgi/util_configlogin_act URI. |
| CVE-2018-1283 | In Apache httpd 2.4.0 to 2.4.29, when mod_session is configured to forward its session data to CGI applications (SessionEnv on, not the default), a remote user may influence their content by using a "Session" header. This comes from the "HTTP_SESSION" variable name used by mod_session to forward its data to CGIs, since the prefix "HTTP_" is also used by the Apache HTTP Server to pass HTTP header fields, per CGI specifications. |
| CVE-2018-12673 | An attacker with remote access to the SV3C HD Camera (L-SERIES V2.3.4.2103-S50-NTD-B20170508B and V2.3.4.2103-S50-NTD-B20170823B) web interface can disclose information about the camera including camera hardware, wireless network, and local area network information. |
| CVE-2018-12672 | The SV3C HD Camera (L-SERIES V2.3.4.2103-S50-NTD-B20170508B) does not perform proper validation on user-supplied input and is vulnerable to cross-site scripting attacks. If proper authorization was implemented, this vulnerability could be leveraged to perform actions on behalf of another user or the administrator. |
| CVE-2018-12671 | An attacker with remote access to the SV3C HD Camera (L-SERIES V2.3.4.2103-S50-NTD-B20170508B and V2.3.4.2103-S50-NTD-B20170823B) web interface can disclose information about the camera including all password sets set within the camera. This information can then be used to gain access to the web interface. |
| CVE-2018-12670 | SV3C L-SERIES HD CAMERA V2.3.4.2103-S50-NTD-B20170508B and V2.3.4.2103-S50-NTD-B20170823B devices allow OS Command Injection. |
| CVE-2018-12669 | SV3C L-SERIES HD CAMERA V2.3.4.2103-S50-NTD-B20170508B and V2.3.4.2103-S50-NTD-B20170823B devices allow remote authenticated users to reset arbitrary accounts via a request to web/cgi-bin/hi3510/param.cgi. |
| CVE-2018-12667 | The SV3C HD Camera (L-SERIES V2.3.4.2103-S50-NTD-B20170508B and V2.3.4.2103-S50-NTD-B20170823B) is affected by an improper authentication vulnerability that allows requests to be made to back-end CGI scripts without a valid session. This vulnerability could be used to read and modify the configuration. The vulnerability affects all versions. |
| CVE-2018-1243 | Dell EMC iDRAC6, versions prior to 2.91, iDRAC7/iDRAC8, versions prior to 2.60.60.60 and iDRAC9, versions prior to 3.21.21.21, contain a weak CGI session ID vulnerability. The sessions invoked via CGI binaries use 96-bit numeric-only session ID values, which makes it easier for remote attackers to perform bruteforce session guessing attacks. |
| CVE-2018-12318 | Information disclosure in the SNMP settings page in ASUSTOR ADM version 3.1.1 allows attackers to obtain the SNMP password in cleartext. |
| CVE-2018-12317 | OS command injection in group.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands as root by modifying the "name" POST parameter. |
| CVE-2018-12316 | OS Command Injection in upload.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands by modifying the filename POST parameter. |
| CVE-2018-12314 | Directory Traversal in downloadwallpaper.cgi in ASUSTOR ADM version 3.1.1 allows attackers to download arbitrary files by manipulating the "file" and "folder" URL parameters. |
| CVE-2018-12313 | OS command injection in snmp.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands without authentication via the "rocommunity" URL parameter. |
| CVE-2018-12312 | OS command injection in user.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands as root via the "secret_key" URL parameter. |
| CVE-2018-12309 | Directory Traversal in upload.cgi in ASUSTOR ADM version 3.1.1 allows attackers to upload files to arbitrary locations by modifying the "path" URL parameter. NOTE: the "filename" POST parameter is covered by CVE-2018-11345. |
| CVE-2018-12308 | Encryption key disclosure in share.cgi in ASUSTOR ADM version 3.1.1 allows attackers to obtain the encryption key via the "encrypt_key" URL parameter. |
| CVE-2018-12307 | OS command injection in user.cgi in ASUSTOR ADM version 3.1.1 allows attackers to execute system commands as root via the "name" POST parameter. |
| CVE-2018-12306 | Directory Traversal in File Explorer in ASUSTOR ADM version 3.1.1 allows attackers to view arbitrary files by modifying the "file1" URL parameter, a similar issue to CVE-2018-11344. |
| CVE-2018-1207 | Dell EMC iDRAC7/iDRAC8, versions prior to 2.52.52.52, contain CGI injection vulnerability which could be used to execute remote code. A remote unauthenticated attacker may potentially be able to use CGI variables to execute remote code. |
| CVE-2018-12049 | ** DISPUTED ** A remote attacker can bypass the System Manager Mode on the Canon LBP6030w web interface without a PIN for /checkLogin.cgi via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation. |
| CVE-2018-12048 | ** DISPUTED ** A remote attacker can bypass the Management Mode on the Canon LBP7110Cw web interface without a PIN for /checkLogin.cgi via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation. |
| CVE-2018-11714 | An issue was discovered on TP-Link TL-WR840N v5 00000005 0.9.1 3.16 v0001.0 Build 170608 Rel.58696n and TL-WR841N v13 00000013 0.9.1 4.16 v0001.0 Build 170622 Rel.64334n devices. This issue is caused by improper session handling on the /cgi/ folder or a /cgi file. If an attacker sends a header of "Referer: http://192.168.0.1/mainFrame.htm" then no authentication is required for any action. |
| CVE-2018-11692 | ** DISPUTED ** An issue was discovered on Canon LBP6650, LBP3370, LBP3460, and LBP7750C devices. It is possible to bypass the Administrator Mode authentication for /tlogin.cgi via vectors involving frame.cgi?page=DevStatus. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation. |
| CVE-2018-11689 | Web Viewer for Hanwha DVR 2.17 and Smart Viewer in Samsung Web Viewer for Samsung DVR are vulnerable to XSS via the /cgi-bin/webviewer_login_page data3 parameter. (The same Web Viewer codebase was transitioned from Samsung to Hanwha.) |
| CVE-2018-11654 | Information disclosure in Netwave IP camera at get_status.cgi (via HTTP on port 8000) allows an unauthenticated attacker to exfiltrate sensitive information from the device. |
| CVE-2018-1164 | This vulnerability allows remote attackers to cause a denial-of-service condition on vulnerable installations of ZyXEL P-870H-51 DSL Router 1.00(AWG.3)D5. Authentication is not required to exploit this vulnerability. The specific flaw exists within numerous exposed CGI endpoints. The vulnerability is caused by improper access controls that allow access to critical functions without authentication. An attacker can use this vulnerability to reboot affected devices, along with other actions. Was ZDI-CAN-4540. |
| CVE-2018-11560 | The webService binary on Insteon HD IP Camera White 2864-222 devices has a stack-based Buffer Overflow leading to Control-Flow Hijacking via a crafted usr key, as demonstrated by a long remoteIp parameter to cgi-bin/CGIProxy.fcgi on port 34100. |
| CVE-2018-11510 | The ASUSTOR ADM 3.1.0.RFQ3 NAS portal suffers from an unauthenticated remote code execution vulnerability in the portal/apis/aggrecate_js.cgi file by embedding OS commands in the 'script' parameter. |
| CVE-2018-1151 | The web server on Western Digital TV Media Player 1.03.07 and TV Live Hub 3.12.13 allow unauthenticated remote attackers to execute arbitrary code or cause denial of service via crafted HTTP requests to toServerValue.cgi. |
| CVE-2018-1149 | cgi_system in NUUO's NVRMini2 3.8.0 and below allows remote attackers to execute arbitrary code via crafted HTTP requests. |
| CVE-2018-1146 | A remote unauthenticated user can enable telnet on the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to set.cgi. When enabled the telnet session requires no password and provides root access. |
| CVE-2018-1145 | A remote unauthenticated user can overflow a stack buffer in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to proxy.cgi. |
| CVE-2018-1144 | A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to proxy.cgi. |
| CVE-2018-1143 | A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to twonky_command.cgi. |
| CVE-2018-11346 | An insecure direct object reference vulnerability in download.cgi in ASUSTOR AS6202T ADM 3.1.0.RFQ3 allows the ability to reference the "download_sys_settings" action and then specify files arbitrarily throughout the system via the act parameter. |
| CVE-2018-11345 | An unrestricted file upload vulnerability in upload.cgi in ASUSTOR AS6202T ADM 3.1.0.RFQ3 allows attackers to upload supplied data via the POST parameter filename. This can be used to place attacker controlled code on the file system that can then be executed. Further, the filename parameter is vulnerable to path traversal and allows the attacker to place the file anywhere on the system. |
| CVE-2018-11344 | A path traversal vulnerability in download.cgi in ASUSTOR AS6202T ADM 3.1.0.RFQ3 allows attackers to arbitrarily specify a file on the system to download via the file1 parameter. |
| CVE-2018-11343 | A persistent cross site scripting vulnerability in playlistmanger.cgi in the ASUSTOR SoundsGood application allows attackers to store cross site scripting payloads via the 'playlist' POST parameter. |
| CVE-2018-11342 | A path traversal vulnerability in fileExplorer.cgi in ASUSTOR AS6202T ADM 3.1.0.RFQ3 allows attackers to arbitrarily specify a path to a file on the system to create folders via the dest_folder parameter. |
| CVE-2018-11341 | Directory traversal in importuser.cgi in ASUSTOR AS6202T ADM 3.1.0.RFQ3 allows attackers to navigate the file system via the filename parameter. |
| CVE-2018-11340 | An unrestricted file upload vulnerability in importuser.cgi in ASUSTOR AS6202T ADM 3.1.0.RFQ3 allows attackers to upload supplied data to a specified filename. This can be used to place attacker controlled code on the file system that is then executed. |
| CVE-2018-11094 | An issue was discovered on Intelbras NCLOUD 300 1.0 devices. /cgi-bin/ExportSettings.sh, /goform/updateWPS, /goform/RebootSystem, and /goform/vpnBasicSettings do not require authentication. For example, when an HTTP POST request is made to /cgi-bin/ExportSettings.sh, the username, password, and other details are retrieved. |
| CVE-2018-10996 | The weblogin_log function in /htdocs/cgibin on D-Link DIR-629-B1 devices allows attackers to execute arbitrary code or cause a denial of service (buffer overflow) via a session.cgi?ACTION=logout request involving a long REMOTE_ADDR environment variable. |
| CVE-2018-10957 | CSRF exists on D-Link DIR-868L devices, leading to (for example) a change to the Admin password. hedwig.cgi and pigwidgeon.cgi are two of the affected components. |
| CVE-2018-10945 | The mg_handle_cgi function in mongoose.c in Mongoose 6.11 allows remote attackers to cause a denial of service (heap-based buffer over-read and application crash, or NULL pointer dereference) via an HTTP request, related to the mbuf_insert function. |
| CVE-2018-10730 | All Phoenix Contact managed FL SWITCH 3xxx, 4xxx, 48xx products running firmware version 1.0 to 1.33 are prone to OS command injection. |
| CVE-2018-10024 | ubiQuoss Switch VP5208A creates a bcm_password file at /cgi-bin/ with the user credentials in cleartext when a failed login attempt occurs. The file can be reached via an HTTP request. The credentials can be used to access the system via SSH (or TELNET if it is enabled). |
| CVE-2018-1000670 | KOHA Library System version 16.11.x (up until 16.11.13) and 17.05.x (up until 17.05.05) contains a Cross Site Scripting (XSS) vulnerability in Multiple fields on multiple pages including /cgi-bin/koha/acqui/supplier.pl?op=enter , /cgi-bin/koha/circ/circulation.pl?borrowernumber=[number] , /cgi-bin/koha/serials/subscription-add.pl that can result in Privilege escalation by taking control of higher privileged users browser sessions. This attack appear to be exploitable via Victims must be socially engineered to visit a vulnerable webpage containing malicious payload. This vulnerability appears to have been fixed in 17.11. |
| CVE-2018-1000669 | KOHA Library System version 16.11.x (up until 16.11.13) and 17.05.x (up until 17.05.05) contains a Cross Site Request Forgery (CSRF) vulnerability in /cgi-bin/koha/members/paycollect.pl Parameters affected: borrowernumber, amount, amountoutstanding, paid that can result in Attackers can mark payments as paid for certain users on behalf of Administrators. This attack appear to be exploitable via The victim must be socially engineered into clicking a link, usually via email. This vulnerability appears to have been fixed in 17.11. |
| CVE-2018-0641 | Buffer overflow in Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary code via tools_system.cgi date parameter, time parameter, and offset parameter. |
| CVE-2018-0640 | Buffer overflow in Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary code via netWizard.cgi date parameter, time parameter, and offset parameter. |
| CVE-2018-0639 | Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via tools_firmware.cgi date parameter, time parameter, and offset parameter. |
| CVE-2018-0638 | Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via import.cgi encKey parameter. |
| CVE-2018-0637 | Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via export.cgi encKey parameter. |
| CVE-2018-0537 | Cross-site scripting vulnerability in QQQ SYSTEMS ver2.24 allows an attacker to inject arbitrary web script or HTML via quiz_op.cgi. |
| CVE-2018-0536 | Cross-site scripting vulnerability in QQQ SYSTEMS ver2.24 allows an attacker to inject arbitrary web script or HTML via quiz.cgi. |
| CVE-2018-0514 | MP Form Mail CGI eCommerce Edition Ver 2.0.13 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors. |
| CVE-2017-9931 | Cross-Site Scripting (XSS) exists in Green Packet DX-350 Firmware version v2.8.9.5-g1.4.8-atheeb, as demonstrated by the action parameter to ajax.cgi. |
| CVE-2017-9930 | Cross-Site Request Forgery (CSRF) exists in Green Packet DX-350 Firmware version v2.8.9.5-g1.4.8-atheeb, as demonstrated by a request to ajax.cgi that enables UPnP. |
| CVE-2017-9833 | ** DISPUTED ** /cgi-bin/wapopen in Boa 0.94.14rc21 allows the injection of "../.." using the FILECAMERA variable (sent by GET) to read files with root privileges. NOTE: multiple third parties report that this is a system-integrator issue (e.g., a vulnerability on one type of camera) because Boa does not include any wapopen program or any code to read a FILECAMERA variable. |
| CVE-2017-9829 | '/cgi-bin/admin/downloadMedias.cgi' of the web service in most of the VIVOTEK Network Cameras is vulnerable, which allows remote attackers to read any file on the camera's Linux filesystem via a crafted HTTP request containing ".." sequences. This vulnerability is already verified on VIVOTEK Network Camera IB8369/FD8164/FD816BA; most others have similar firmware that may be affected. |
| CVE-2017-9828 | '/cgi-bin/admin/testserver.cgi' of the web service in most of the VIVOTEK Network Cameras is vulnerable to shell command injection, which allows remote attackers to execute any shell command as root via a crafted HTTP request. This vulnerability is already verified on VIVOTEK Network Camera IB8369/FD8164/FD816BA; most others have similar firmware that may be affected. An attack uses shell metacharacters in the senderemail parameter. |
| CVE-2017-9757 | IPFire 2.19 has a Remote Command Injection vulnerability in ids.cgi via the OINKCODE parameter, which is mishandled by a shell. This can be exploited directly by authenticated users, or through CSRF. |
| CVE-2017-9554 | An information exposure vulnerability in forget_passwd.cgi in Synology DiskStation Manager (DSM) before 6.1.3-15152 allows remote attackers to enumerate valid usernames via unspecified vectors. |
| CVE-2017-9542 | D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device. |
| CVE-2017-9313 | Multiple Cross-site scripting (XSS) vulnerabilities in Webmin before 1.850 allow remote attackers to inject arbitrary web script or HTML via the sec parameter to view_man.cgi, the referers parameter to change_referers.cgi, or the name parameter to save_user.cgi. NOTE: these issues were not fixed in 1.840. |
| CVE-2017-9100 | login.cgi on D-Link DIR-600M devices with firmware 3.04 allows remote attackers to bypass authentication by entering more than 20 blank spaces in the password field during an admin login attempt. |
| CVE-2017-9097 | In Anti-Web through 3.8.7, as used on NetBiter FGW200 devices through 3.21.2, WS100 devices through 3.30.5, EC150 devices through 1.40.0, WS200 devices through 3.30.4, EC250 devices through 1.40.0, and other products, an LFI vulnerability allows a remote attacker to read or modify files through a path traversal technique, as demonstrated by reading the password file, or using the template parameter to cgi-bin/write.cgi to write to an arbitrary file. |
| CVE-2017-9037 | Multiple cross-site scripting (XSS) vulnerabilities in Trend Micro ServerProtect for Linux 3.0 before CP 1531 allow remote attackers to inject arbitrary web script or HTML via the (1) S44, (2) S5, (3) S_action_fail, (4) S_ptn_update, (5) T113, (6) T114, (7) T115, (8) T117117, (9) T118, (10) T_action_fail, (11) T_ptn_update, (12) textarea, (13) textfield5, or (14) tmLastConfigFileModifiedDate parameter to notification.cgi. |
| CVE-2017-9033 | Cross-site request forgery (CSRF) vulnerability in Trend Micro ServerProtect for Linux 3.0 before CP 1531 allows remote attackers to hijack the authentication of users for requests to start an update from an arbitrary source via a crafted request to SProtectLinux/scanoption_set.cgi, related to the lack of anti-CSRF tokens. |
| CVE-2017-9032 | Multiple cross-site scripting (XSS) vulnerabilities in Trend Micro ServerProtect for Linux 3.0 before CP 1531 allow remote attackers to inject arbitrary web script or HTML via the (1) T1 or (2) tmLastConfigFileModifiedDate parameter to log_management.cgi. |
| CVE-2017-8920 | irc.cgi in CGI:IRC before 0.5.12 reflects user-supplied input from the R parameter without proper output encoding, aka XSS. |
| CVE-2017-8841 | Arbitrary file deletion exists on Peplink Balance 305, 380, 580, 710, 1350, and 2500 devices with firmware before fw-b305hw2_380hw6_580hw2_710hw3_1350hw2_2500-7.0.1-build2093. The attack methodology is absolute path traversal in cgi-bin/MANGA/firmware_process.cgi via the upfile.path parameter. |
| CVE-2017-8840 | Debug information disclosure exists on Peplink Balance 305, 380, 580, 710, 1350, and 2500 devices with firmware before fw-b305hw2_380hw6_580hw2_710hw3_1350hw2_2500-7.0.1-build2093. A direct request to cgi-bin/HASync/hasync.cgi?debug=1 shows Master LAN Address, Serial Number, HA Group ID, Virtual IP, and Submitted syncid. |
| CVE-2017-8839 | XSS via orig_url exists on Peplink Balance 305, 380, 580, 710, 1350, and 2500 devices with firmware before fw-b305hw2_380hw6_580hw2_710hw3_1350hw2_2500-7.0.1-build2093. The affected script is guest/preview.cgi. |
| CVE-2017-8838 | XSS via syncid exists on Peplink Balance 305, 380, 580, 710, 1350, and 2500 devices with firmware before fw-b305hw2_380hw6_580hw2_710hw3_1350hw2_2500-7.0.1-build2093. The affected script is cgi-bin/HASync/hasync.cgi. |
| CVE-2017-8836 | CSRF exists on Peplink Balance 305, 380, 580, 710, 1350, and 2500 devices with firmware before fw-b305hw2_380hw6_580hw2_710hw3_1350hw2_2500-7.0.1-build2093. The CGI scripts in the administrative interface are affected. This allows an attacker to execute commands, if a logged in user visits a malicious website. This can for example be used to change the credentials of the administrative webinterface. |
| CVE-2017-8835 | SQL injection exists on Peplink Balance 305, 380, 580, 710, 1350, and 2500 devices with firmware before fw-b305hw2_380hw6_580hw2_710hw3_1350hw2_2500-7.0.1-build2093. An attack vector is the bauth cookie to cgi-bin/MANGA/admin.cgi. One impact is enumeration of user accounts by observing whether a session ID can be retrieved from the sessions database. |
| CVE-2017-8406 | An issue was discovered on D-Link DCS-1130 devices. The device provides a crossdomain.xml file with no restrictions on who can access the webserver. This allows an hosted flash file on any domain to make calls to the device's webserver and pull any information that is stored on the device. In this case, user's credentials are stored in clear text on the device and can be pulled easily. It also seems that the device does not implement any cross-site scripting forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a cross-site flashing attack on the user's browser and execute any action on the device provided by the web management interface which steals the credentials from tools_admin.cgi file's response and displays it inside a Textfield. |
| CVE-2017-8219 | TP-Link C2 and C20i devices through firmware 0.9.1 4.2 v0032.0 Build 160706 Rel.37961n allow DoSing the HTTP server via a crafted Cookie header to the /cgi/ansi URI. |
| CVE-2017-8078 | On the TP-Link TL-SG108E 1.0, the upgrade process can be requested remotely without authentication (httpupg.cgi with a parameter called cmd). This affects the 1.1.2 Build 20141017 Rel.50749 firmware. |
| CVE-2017-7630 | QNAP QTS 4.2.6 build 20171026, QTS 4.3.3 build 20170727 and earlier allows remote attackers to obtain potentially sensitive information (firmware version and running services) via a request to sysinfoReq.cgi. |
| CVE-2017-7462 | Intellinet NFC-30ir IP Camera has a vendor backdoor that can allow a remote attacker access to a vendor-supplied CGI script in the web directory. |
| CVE-2017-7461 | Directory traversal vulnerability in the web-based management site on the Intellinet NFC-30ir IP Camera with firmware LM.1.6.16.05 allows remote attackers to read arbitrary files via a request to a vendor-supplied CGI script that is used to read HTML text file, but that does not do any URI/path sanitization. |
| CVE-2017-6900 | An issue was discovered in Riello NetMan 204 14-2 and 15-2. The issue is with the login script and wrongpass Python script used for authentication. When calling wrongpass, the variables $VAL0 and $VAL1 should be enclosed in quotes to prevent the potential for Bash command injection. Further to this, VAL0 and VAL1 should be sanitised to ensure they do not contain malicious characters. Passing it the username of '-' will cause it to time out and log the user in because of poor error handling. This will log the attacker in as an administrator where the telnet / ssh services can be enabled, and the credentials for local users can be reset. Also, login.cgi accepts the username as a GET parameter, so login can be achieved by browsing to the /cgi-bin/login.cgi?username=-%20a URI. |
| CVE-2017-6558 | iball Baton 150M iB-WRA150N v1 00000001 1.2.6 build 110401 Rel.47776n devices are prone to an authentication bypass vulnerability that allows remote attackers to view and modify administrative router settings by reading the HTML source code of the password.cgi file. |
| CVE-2017-6549 | Session hijack vulnerability in httpd on ASUS RT-N56U, RT-N66U, RT-AC66U, RT-N66R, RT-AC66R, RT-AC68U, RT-AC68R, RT-N66W, RT-AC66W, RT-AC87R, RT-AC87U, RT-AC51U, RT-AC68P, RT-N11P, RT-N12+, RT-N12E B1, RT-AC3200, RT-AC53U, RT-AC1750, RT-AC1900P, RT-N300, and RT-AC750 routers with firmware before 3.0.0.4.380.7378; RT-AC68W routers with firmware before 3.0.0.4.380.7266; and RT-N600, RT-N12+ B1, RT-N11P B1, RT-N12VP B1, RT-N12E C1, RT-N300 B1, and RT-N12+ Pro routers with firmware before 3.0.0.4.380.9488; and Asuswrt-Merlin firmware before 380.65_2 allows remote attackers to steal any active admin session by sending cgi_logout and asusrouter-Windows-IFTTT-1.0 in certain HTTP headers. |
| CVE-2017-6531 | On Televes COAXDATA GATEWAY 1Gbps devices doc-wifi-hgw_v1.02.0014 4.20, the backup/restore feature lacks access control, related to ReadFile.cgi and LoadCfgFile. |
| CVE-2017-6527 | An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to a NUL-terminated directory traversal attack allowing an unauthenticated attacker to access system files readable by the web server user (by using the viewAppletFsa.cgi seqID parameter). |
| CVE-2017-6526 | An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests). |
| CVE-2017-6366 | Cross-site request forgery (CSRF) vulnerability in NETGEAR DGN2200 routers with firmware 10.0.0.20 through 10.0.0.50 allows remote attackers to hijack the authentication of users for requests that perform DNS lookups via the host_name parameter to dnslookup.cgi. NOTE: this issue can be combined with CVE-2017-6334 to execute arbitrary code remotely. |
| CVE-2017-6334 | dnslookup.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the host_name field of an HTTP POST request, a different vulnerability than CVE-2017-6077. |
| CVE-2017-6188 | Munin before 2.999.6 has a local file write vulnerability when CGI graphs are enabled. Setting multiple upper_limit GET parameters allows overwriting any file accessible to the www-data user. |
| CVE-2017-6127 | Multiple cross-site request forgery (CSRF) vulnerabilities in the access portal on the DIGISOL DG-HR1400 Wireless Router with firmware 1.00.02 allow remote attackers to hijack the authentication of administrators for requests that (1) change the SSID, (2) change the Wi-Fi password, or (3) possibly have unspecified other impact via crafted requests to form2WlanBasicSetup.cgi. |
| CVE-2017-6077 | ping.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping_IPAddr field of an HTTP POST request. |
| CVE-2017-5928 | The W3C High Resolution Time API, as implemented in various web browsers, does not consider that memory-reference times can be measured by a performance.now "Time to Tick" approach even with the https://bugzilla.mozilla.org/show_bug.cgi?id=1167489#c9 protection mechanism in place, which makes it easier for remote attackers to conduct AnC attacks via crafted JavaScript code. |
| CVE-2017-5633 | Multiple cross-site request forgery (CSRF) vulnerabilities on the D-Link DI-524 Wireless Router with firmware 9.01 allow remote attackers to (1) change the admin password, (2) reboot the device, or (3) possibly have unspecified other impact via crafted requests to CGI programs. |
| CVE-2017-5521 | An issue was discovered on NETGEAR R8500, R8300, R7000, R6400, R7300, R7100LG, R6300v2, WNDR3400v3, WNR3500Lv2, R6250, R6700, R6900, and R8000 devices. They are prone to password disclosure via simple crafted requests to the web management server. The bug is exploitable remotely if the remote management option is set, and can also be exploited given access to the router over LAN or WLAN. When trying to access the web panel, a user is asked to authenticate; if the authentication is canceled and password recovery is not enabled, the user is redirected to a page that exposes a password recovery token. If a user supplies the correct token to the page /passwordrecovered.cgi?id=TOKEN (and password recovery is not enabled), they will receive the admin password for the router. If password recovery is set the exploit will fail, as it will ask the user for the recovery questions that were previously set when enabling that feature. This is persistent (even after disabling the recovery option, the exploit will fail) because the router will ask for the security questions. |
| CVE-2017-2891 | An exploitable use-after-free vulnerability exists in the HTTP server implementation of Cesanta Mongoose 6.8. An ordinary HTTP POST request with a CGI target can cause a reuse of previously freed pointer potentially resulting in remote code execution. An attacker needs to send this HTTP request over the network to trigger this vulnerability. |
| CVE-2017-20049 | A vulnerability, was found in legacy Axis devices such as P3225 and M3005. This affects an unknown part of the component CGI Script. The manipulation leads to improper privilege management. It is possible to initiate the attack remotely. |
| CVE-2017-18377 | An issue was discovered on Wireless IP Camera (P2P) WIFICAM cameras. There is Command Injection in the set_ftp.cgi script via shell metacharacters in the pwd variable, as demonstrated by a set_ftp.cgi?svr=192.168.1.1&port=21&user=ftp URI. |
| CVE-2017-18046 | Buffer overflow on Dasan GPON ONT WiFi Router H640X 12.02-01121 2.77p1-1124 and 3.03p2-1146 devices allows remote attackers to execute arbitrary code via a long POST request to the login_action function in /cgi-bin/login_action.cgi (aka cgipage.cgi). |
| CVE-2017-18025 | cgi-bin/drknow.cgi in Innotube ITGuard-Manager 0.0.0.1 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the username field, as demonstrated by a username beginning with "admin|" to use the '|' metacharacter. |
| CVE-2017-17947 | A cross site scripting issue has been found in custompage.cgi in Pulse Secure Pulse Connect Secure (PCS) before 8.0R17.0, 8.1.x before 8.1R13, 8.2.x before 8.2R9, and 8.3.x before 8.3R3 and Pulse Policy Secure (PPS) before 5.2R10, 5.3.x before 5.3R9, and 5.4.x before 5.4R3 due to one of the URL parameters not being sanitized. Exploitation does require the user to be logged in as administrator; the issue is not applicable to the end user portal. |
| CVE-2017-17933 | cgi/surgeftpmgr.cgi (aka the Web Manager interface on TCP port 7021 or 9021) in NetWin SurgeFTP version 23f2 has XSS via the classid, domainid, or username parameter. |
| CVE-2017-17888 | cgi-bin/write.cgi in Anti-Web through 3.8.7, as used on NetBiter / HMS, Ouman EH-net, Alliance System WS100 --> AWU 500, Sauter ERW100F001, Carlo Gavazzi SIU-DLG, AEDILIS SMART-1, SYXTHSENSE WebBiter, ABB SREA, and ASCON DY WebServer devices, allows remote authenticated users to execute arbitrary OS commands via crafted multipart/form-data content, a different vulnerability than CVE-2017-9097. |
| CVE-2017-17758 | TP-Link TL-WVR and TL-WAR devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the interface field of an admin/dhcps command to cgi-bin/luci, related to the zone_get_iface_bydev function in /usr/lib/lua/luci/controller/admin/dhcps.lua in uhttpd. |
| CVE-2017-17757 | TP-Link TL-WVR and TL-WAR devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the interface field of an admin/wportal command to cgi-bin/luci, related to the get_device_byif function in /usr/lib/lua/luci/controller/admin/wportal.lua in uhttpd. |
| CVE-2017-17745 | Cross-site scripting (XSS) vulnerability in system_name_set.cgi in TP-Link TL-SG108E 1.0.0 allows authenticated remote attackers to submit arbitrary java script via the 'sysName' parameter. |
| CVE-2017-17740 | contrib/slapd-modules/nops/nops.c in OpenLDAP through 2.4.45, when both the nops module and the memberof overlay are enabled, attempts to free a buffer that was allocated on the stack, which allows remote attackers to cause a denial of service (slapd crash) via a member MODDN operation. |
| CVE-2017-17562 | Embedthis GoAhead before 3.6.5 allows remote code execution if CGI is enabled and a CGI program is dynamically linked. This is a result of initializing the environment of forked CGI scripts using untrusted HTTP request parameters in the cgiHandler function in cgi.c. When combined with the glibc dynamic linker, this behaviour can be abused for remote code execution using special parameter names such as LD_PRELOAD. An attacker can POST their shared object payload in the body of the request, and reference it using /proc/self/fd/0. |
| CVE-2017-17550 | ZyXEL ZyWALL USG 2.12 AQQ.2 and 3.30 AQQ.7 devices are affected by a CSRF vulnerability via a cgi-bin/zysh-cgi cmd action to add a user account. This account's access could, for example, subsequently be used for stored XSS. |
| CVE-2017-17463 | Vivo modems allow remote attackers to obtain sensitive information by reading the index.cgi?page=wifi HTML source code, as demonstrated by ssid and psk_wepkey fields. |
| CVE-2017-17106 | Credentials for Zivif PR115-204-P-RS V2.3.4.2103 Webcams can be obtained by an unauthenticated remote attacker using a standard web /cgi-bin/hi3510/param.cgi?cmd=getuser HTTP request. This vulnerability exists because of a lack of authentication checks in requests to CGI pages. |
| CVE-2017-17105 | Zivif PR115-204-P-RS V2.3.4.2103 and V4.7.4.2121 (and possibly in-between versions) web cameras are vulnerable to unauthenticated, blind remote command injection via CGI scripts used as part of the web interface, as demonstrated by a cgi-bin/iptest.cgi?cmd=iptest.cgi&-time="1504225666237"&-url=$(reboot) request. |
| CVE-2017-17101 | An issue was discovered in Apexis APM-H803-MPC software, as used with many different models of IP Camera. An unprotected CGI method inside the web application permits an unauthenticated user to bypass the login screen and access the webcam contents including: live video stream, configuration files with all the passwords, system information, and much more. With this vulnerability, anyone can access to a vulnerable webcam with 'super admin' privilege. |
| CVE-2017-17089 | custom/run.cgi in Webmin before 1.870 allows remote authenticated administrators to conduct XSS attacks via the description field in the custom command functionality. |
| CVE-2017-16960 | TP-Link TL-WVR, TL-WAR, TL-ER, and TL-R devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the t_bindif field of an admin/interface command to cgi-bin/luci, related to the get_device_byif function in /usr/lib/lua/luci/controller/admin/interface.lua in uhttpd. |
| CVE-2017-16959 | The locale feature in cgi-bin/luci on TP-Link TL-WVR, TL-WAR, TL-ER, and TL-R devices allows remote authenticated users to test for the existence of arbitrary files by making an operation=write;locale=%0d request, and then making an operation=read request with a crafted Accept-Language HTTP header, related to the set_sysinfo and get_sysinfo functions in /usr/lib/lua/luci/controller/locale.lua in uhttpd. |
| CVE-2017-16958 | TP-Link TL-WVR, TL-WAR, TL-ER, and TL-R devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the t_bindif field of an admin/bridge command to cgi-bin/luci, related to the get_device_byif function in /usr/lib/lua/luci/controller/admin/bridge.lua in uhttpd. |
| CVE-2017-16957 | TP-Link TL-WVR, TL-WAR, TL-ER, and TL-R devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the iface field of an admin/diagnostic command to cgi-bin/luci, related to the zone_get_effect_devices function in /usr/lib/lua/luci/controller/admin/diagnostic.lua in uhttpd. |
| CVE-2017-16953 | connoppp.cgi on ZTE ZXDSL 831CII devices does not require HTTP Basic Authentication, which allows remote attackers to modify the PPPoE configuration or set up a malicious configuration via a GET request. |
| CVE-2017-16936 | Directory Traversal vulnerability in app_data_center on Shenzhen Tenda Ac9 US_AC9V1.0BR_V15.03.05.14_multi_TD01, Ac9 ac9_kf_V15.03.05.19(6318_)_cn, Ac15 US_AC15V1.0BR_V15.03.05.18_multi_TD01, Ac15 US_AC15V1.0BR_V15.03.05.19_multi_TD01, Ac18 US_AC18V1.0BR_V15.03.05.05_multi_TD01, and Ac18 ac18_kf_V15.03.05.19(6318_)_cn devices allows remote unauthenticated attackers to read arbitrary files via a cgi-bin/luci/request?op=1&path= URI that uses directory traversal sequences after a /usb/ substring. |
| CVE-2017-16923 | Command Injection vulnerability in app_data_center on Shenzhen Tenda Ac9 US_AC9V1.0BR_V15.03.05.14_multi_TD01, Ac9 ac9_kf_V15.03.05.19(6318_)_cn, Ac15 US_AC15V1.0BR_V15.03.05.18_multi_TD01, Ac15 US_AC15V1.0BR_V15.03.05.19_multi_TD01, Ac18 US_AC18V1.0BR_V15.03.05.05_multi_TD01, and Ac18 ac18_kf_V15.03.05.19(6318_)_cn devices allows remote unauthenticated attackers to execute arbitrary OS commands via a crafted cgi-bin/luci/usbeject?dev_name= GET request from the LAN. This occurs because the "sub_A6E8 usbeject_process_entry" function executes a system function with untrusted input. |
| CVE-2017-16787 | The Web Configuration Utility in Meinberg LANTIME devices with firmware before 6.24.004 allows remote attackers to read arbitrary files by leveraging failure to restrict URL access. |
| CVE-2017-16786 | The Web Configuration Utility in Meinberg LANTIME devices with firmware before 6.24.004 allows remote authenticated users with certain privileges to read arbitrary files via (1) the ntpclientcounterlogfile parameter to cgi-bin/mainv2 or (2) vectors involving curl support of the "file" schema in the firmware update functionality. |
| CVE-2017-16775 | Improper restriction of rendered UI layers or frames vulnerability in SSOOauth.cgi in Synology SSO Server before 2.1.3-0129 allows remote attackers to conduct clickjacking attacks via unspecified vectors. |
| CVE-2017-16765 | XSS exists on D-Link DWR-933 1.00(WW)B17 devices via cgi-bin/gui.cgi. |
| CVE-2017-16565 | Cross-Site Request Forgery (CSRF) in /cgi-bin/login on Vonage (Grandstream) HT802 devices allows attackers to authenticate a user via the login screen using the default password of 123 and submit arbitrary requests. |
| CVE-2017-16564 | Stored Cross-site scripting (XSS) vulnerability in /cgi-bin/config2 on Vonage (Grandstream) HT802 devices allows remote authenticated users to inject arbitrary web script or HTML via the DHCP vendor class ID field (P148). |
| CVE-2017-16563 | Cross-Site Request Forgery (CSRF) in the Basic Settings screen on Vonage (Grandstream) HT802 devices allows attackers to modify settings, related to cgi-bin/update. |
| CVE-2017-15889 | Command injection vulnerability in smart.cgi in Synology DiskStation Manager (DSM) before 5.2-5967-5 allows remote authenticated users to execute arbitrary commands via disk field. |
| CVE-2017-15805 | Cisco Small Business SA520 and SA540 devices with firmware 2.1.71 and 2.2.0.7 allow ../ directory traversal in scgi-bin/platform.cgi via the thispage parameter, for reading arbitrary files. |
| CVE-2017-15706 | As part of the fix for bug 61201, the documentation for Apache Tomcat 9.0.0.M22 to 9.0.1, 8.5.16 to 8.5.23, 8.0.45 to 8.0.47 and 7.0.79 to 7.0.82 included an updated description of the search algorithm used by the CGI Servlet to identify which script to execute. The update was not correct. As a result, some scripts may have failed to execute as expected and other scripts may have been executed unexpectedly. Note that the behaviour of the CGI servlet has remained unchanged in this regard. It is only the documentation of the behaviour that was wrong and has been corrected. |
| CVE-2017-15647 | On FiberHome routers, Directory Traversal exists in /cgi-bin/webproc via the getpage parameter in conjunction with a crafted var:page value. |
| CVE-2017-15645 | CSRF exists in Webmin 1.850. By sending a GET request to at/create_job.cgi containing dir=/&cmd= in the URI, an attacker to execute arbitrary commands. |
| CVE-2017-15644 | SSRF exists in Webmin 1.850 via the PATH_INFO to tunnel/link.cgi, as demonstrated by a GET request for tunnel/link.cgi/http://INTRANET-IP:8000. |
| CVE-2017-14948 | Certain D-Link products are affected by: Buffer Overflow. This affects DIR-880L 1.08B04 and DIR-895 L/R 1.13b03. The impact is: execute arbitrary code (remote). The component is: htdocs/fileaccess.cgi. The attack vector is: A crafted HTTP request handled by fileacces.cgi could allow an attacker to mount a ROP attack: if the HTTP header field CONTENT_TYPE starts with ''boundary=' followed by more than 256 characters, a buffer overflow would be triggered, potentially causing code execution. |
| CVE-2017-14942 | Intelbras WRN 150 devices allow remote attackers to read the configuration file, and consequently bypass authentication, via a direct request for cgi-bin/DownloadCfg/RouterCfm.cfg containing an admin:language=pt cookie. |
| CVE-2017-14854 | A stack buffer overflow exists in one of the Orpak SiteOmat CGI components, allowing for remote code execution. The vulnerability affects all versions prior to 2017-09-25. |
| CVE-2017-14262 | On Samsung NVR devices, remote attackers can read the MD5 password hash of the 'admin' account via certain szUserName JSON data to cgi-bin/main-cgi, and login to the device with that hash in the szUserPasswd parameter. |
| CVE-2017-14244 | An authentication bypass vulnerability on iBall Baton ADSL2+ Home Router FW_iB-LR7011A_1.0.2 devices potentially allows attackers to directly access administrative router settings by crafting URLs with a .cgi extension, as demonstrated by /info.cgi and /password.cgi. |
| CVE-2017-14243 | An authentication bypass vulnerability on UTStar WA3002G4 ADSL Broadband Modem WA3002G4-0021.01 devices allows attackers to directly access administrative settings and obtain cleartext credentials from HTML source, as demonstrated by info.cgi, upload.cgi, backupsettings.cgi, pppoe.cgi, resetrouter.cgi, and password.cgi. |
| CVE-2017-14147 | An issue was discovered on FiberHome User End Routers Bearing Model Number AN1020-25 which could allow an attacker to easily restore a router to its factory settings by simply browsing to the link http://[Default-Router-IP]/restoreinfo.cgi & execute it. Due to improper authentication on this page, the software accepts the request hence allowing attacker to reset the router to its default configurations which later could allow attacker to login to router by using default username/password. |
| CVE-2017-14127 | Command Injection in the Ping Module in the Web Interface on Technicolor TD5336 OI_Fw_v7 devices allows remote attackers to execute arbitrary OS commands as root via shell metacharacters in the pingAddr parameter to mnt_ping.cgi. |
| CVE-2017-13771 | Lexmark Scan To Network (SNF) 3.2.9 and earlier stores network configuration credentials in plaintext and transmits them in requests, which allows remote attackers to obtain sensitive information via requests to (1) cgi-bin/direct/printer/prtappauth/apps/snfDestServlet or (2) cgi-bin/direct/printer/prtappauth/apps/ImportExportServlet. |
| CVE-2017-13713 | T&W WIFI Repeater BE126 allows remote authenticated users to execute arbitrary code via shell metacharacters in the user parameter to cgi-bin/webupg. |
| CVE-2017-12575 | An issue was discovered on the NEC Aterm WG2600HP2 1.0.2. The router has a set of web service APIs for access to and setup of the configuration. Some APIs don't require authentication. An attacker could exploit this vulnerability by sending a crafted HTTP request to retrieve DHCP clients, firmware version, and network status (ex.: curl -X http://[IP]/aterm_httpif.cgi/negotiate -d "REQ_ID=SUPPORT_IF_GET"). |
| CVE-2017-12573 | An issue was discovered on PLANEX CS-W50HD devices with firmware before 030720. The device has a command-injection vulnerability in the web management UI on NAS settings page "/cgi-bin/nasset.cgi". An attacker can send a crafted HTTP POST request to execute arbitrary code. Authentication is required before executing the attack. |
| CVE-2017-11588 | On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is remote command execution via shell metacharacters in the pingAddr parameter to the waitPingqry.cgi URI. The command output is visible at /PingMsg.cmd. |
| CVE-2017-11455 | diag.cgi in Pulse Connect Secure 8.2R1 through 8.2R5, 8.1R1 through 8.1R10 and Pulse Policy Secure 5.3R1 through 5.3R5, 5.2R1 through 5.2R8, and 5.1R1 through 5.1R10 allow remote attackers to hijack the authentication of administrators for requests to start tcpdump, related to the lack of anti-CSRF tokens. |
| CVE-2017-11350 | Cross-Site Request Forgery (CSRF) exists in cgi-bin/ConfigSet on Axesstel MU553S MU55XS-V1.14 devices. |
| CVE-2017-11196 | Pulse Connect Secure 8.3R1 has CSRF in logout.cgi. The logout function of the admin panel is not protected by any CSRF tokens, thus allowing an attacker to logout a user by making them visit a malicious web page. |
| CVE-2017-11195 | Pulse Connect Secure 8.3R1 has Reflected XSS in launchHelp.cgi. The helpLaunchPage parameter is reflected in an IFRAME element, if the value contains two quotes. It properly sanitizes quotes and tags, so one cannot simply close the src with a quote and inject after that. However, an attacker can use javascript: or data: to abuse this. |
| CVE-2017-11194 | Pulse Connect Secure 8.3R1 has Reflected XSS in adminservercacertdetails.cgi. In the admin panel, the certid parameter of adminservercacertdetails.cgi is reflected in the application's response and is not properly sanitized, allowing an attacker to inject tags. An attacker could come up with clever payloads to make the system run commands such as ping, ping6, traceroute, nslookup, arp, etc. |
| CVE-2017-11193 | Pulse Connect Secure 8.3R1 has CSRF in diag.cgi. In the panel, the diag.cgi file is responsible for running commands such as ping, ping6, traceroute, traceroute6, nslookup, arp, and Portprobe. These functions do not have any protections against CSRF. That can allow an attacker to run these commands against any IP if they can get an admin to visit their malicious CSRF page. |
| CVE-2017-11169 | Privilege Escalation on iBall iB-WRA300N3GT iB-WRA300N3GT_1.1.1 devices allows remote authenticated users to obtain root privileges by leveraging a guest/user/normal account to submit a modified privilege parameter to /form2userconfig.cgi. |
| CVE-2017-10677 | Cross-Site Request Forgery (CSRF) exists on Linksys EA4500 devices with Firmware Version before 2.1.41.164606, as demonstrated by a request to apply.cgi to disable SIP. |
| CVE-2017-10676 | On D-Link DIR-600M devices before C1_v3.05ENB01_beta_20170306, XSS was found in the form2userconfig.cgi username parameter. |
| CVE-2017-1000471 | EmbedThis GoAhead Webserver version 4.0.0 is vulnerable to a NULL pointer dereference in the CGI handler resulting in memory corruption or denial of service. |
| CVE-2017-0356 | A flaw, similar to to CVE-2016-9646, exists in ikiwiki before 3.20170111, in the passwordauth plugin's use of CGI::FormBuilder, allowing an attacker to bypass authentication via repeated parameters. |
| CVE-2016-9684 | The SonicWall Secure Remote Access server (version 8.1.0.2-14sv) is vulnerable to a Remote Command Injection vulnerability in its web administrative interface. This vulnerability occurs in the 'viewcert' CGI (/cgi-bin/viewcert) component responsible for processing SSL certificate information. The CGI application doesn't properly escape the information it's passed in the 'CERT' variable before a call to system() is performed - allowing for remote command injection. Exploitation of this vulnerability yields shell access to the remote machine under the nobody user account. |
| CVE-2016-9683 | The SonicWall Secure Remote Access server (version 8.1.0.2-14sv) is vulnerable to a Remote Command Injection vulnerability in its web administrative interface. This vulnerability occurs in the 'extensionsettings' CGI (/cgi-bin/extensionsettings) component responsible for handling some of the server's internal configurations. The CGI application doesn't properly escape the information it's passed when processing a particular multi-part form request involving scripts. The filename of the 'scriptname' variable is read in unsanitized before a call to system() is performed - allowing for remote command injection. Exploitation of this vulnerability yields shell access to the remote machine under the nobody user account. This is SonicWall Issue ID 181195. |
| CVE-2016-9682 | The SonicWall Secure Remote Access server (version 8.1.0.2-14sv) is vulnerable to two Remote Command Injection vulnerabilities in its web administrative interface. These vulnerabilities occur in the diagnostics CGI (/cgi-bin/diagnostics) component responsible for emailing out information about the state of the system. The application doesn't properly escape the information passed in the 'tsrDeleteRestartedFile' or 'currentTSREmailTo' variables before making a call to system(), allowing for remote command injection. Exploitation of this vulnerability yields shell access to the remote machine under the nobody user account. |
| CVE-2016-9646 | ikiwiki before 3.20161229 incorrectly called the CGI::FormBuilder->field method (similar to the CGI->param API that led to Bugzilla's CVE-2014-1572), which can be abused to lead to commit metadata forgery. |
| CVE-2016-9496 | Hughes high-performance broadband satellite modems, models HN7740S DW7000 HN7000S/SM, lacks authentication. An unauthenticated user may send an HTTP GET request to http://[ip]/com/gatewayreset or http://[ip]/cgi/reboot.bin to cause the modem to reboot. |
| CVE-2016-8743 | Apache HTTP Server, in all releases prior to 2.2.32 and 2.4.25, was liberal in the whitespace accepted from requests and sent in response lines and headers. Accepting these different behaviors represented a security concern when httpd participates in any chain of proxies or interacts with back-end application servers, either through mod_proxy or using conventional CGI mechanisms, and may result in request smuggling, response splitting and cache pollution. |
| CVE-2016-8593 | Directory traversal vulnerability in upload.cgi in Trend Micro Threat Discovery Appliance 2.6.1062r1 and earlier allows remote authenticated users to execute arbitrary code via a .. (dot dot) in the dID parameter. |
| CVE-2016-8592 | log_query_system.cgi in Trend Micro Threat Discovery Appliance 2.6.1062r1 and earlier allows remote authenticated users to execute arbitrary code as the root user via shell metacharacters in the cache_id parameter. |
| CVE-2016-8591 | log_query.cgi in Trend Micro Threat Discovery Appliance 2.6.1062r1 and earlier allows remote authenticated users to execute arbitrary code as the root user via shell metacharacters in the cache_id parameter. |
| CVE-2016-8590 | log_query_dlp.cgi in Trend Micro Threat Discovery Appliance 2.6.1062r1 and earlier allows remote authenticated users to execute arbitrary code as the root user via shell metacharacters in the cache_id parameter. |
| CVE-2016-8589 | log_query_dae.cgi in Trend Micro Threat Discovery Appliance 2.6.1062r1 and earlier allows remote authenticated users to execute arbitrary code as the root user via shell metacharacters in the cache_id parameter. |
| CVE-2016-8588 | The hotfix_upload.cgi in Trend Micro Threat Discovery Appliance 2.6.1062r1 and earlier allows remote authenticated users to execute arbitrary code via shell metacharacters in the file name of an uploaded file. |
| CVE-2016-8587 | dlp_policy_upload.cgi in Trend Micro Threat Discovery Appliance 2.6.1062r1 and earlier allows remote authenticated users to execute arbitrary code via an archive file containing a symlink to /eng_ptn_stores/prod/sensorSDK/data/ or /eng_ptn_stores/prod/sensorSDK/backup_pol/. |
| CVE-2016-8586 | detected_potential_files.cgi in Trend Micro Threat Discovery Appliance 2.6.1062r1 and earlier allows remote authenticated users to execute arbitrary code as the root user via shell metacharacters in the cache_id parameter. |
| CVE-2016-8585 | admin_sys_time.cgi in Trend Micro Threat Discovery Appliance 2.6.1062r1 and earlier allows remote authenticated users to execute arbitrary code as the root user via shell metacharacters in the timezone parameter. |
| CVE-2016-7547 | A command execution flaw on the Trend Micro Threat Discovery Appliance 2.6.1062r1 exists with the timezone parameter in the admin_sys_time.cgi interface. |
| CVE-2016-6840 | Cross-site scripting (XSS) vulnerability in the management interface in Huawei OceanStor ISM before V200R001C04SPC200 allows remote attackers to inject arbitrary web script or HTML via the loginName parameter to cgi-bin/doLogin_CgiEntry and possibly other unspecified vectors. |
| CVE-2016-6631 | An issue was discovered in phpMyAdmin. A user can execute a remote code execution attack against a server when phpMyAdmin is being run as a CGI application. Under certain server configurations, a user can pass a query string which is executed as a command-line argument by the file generator_plugin.sh. All 4.6.x versions (prior to 4.6.4), 4.4.x versions (prior to 4.4.15.8), and 4.0.x versions (prior to 4.0.10.17) are affected. |
| CVE-2016-6558 | A command injection vulnerability exists in apply.cgi on the ASUS RP-AC52 access point, firmware version 1.0.1.1s and possibly earlier, web interface specifically in the action_script parameter. The action_script parameter specifies a script to be executed if the action_mode parameter does not contain a valid state. If the input provided by action_script does not match one of the hard coded options, then it will be executed as the argument of either a system() or an eval() call allowing arbitrary commands to be executed. |
| CVE-2016-6534 | Opmantek NMIS before 4.3.7c has command injection via man, finger, ping, trace, and nslookup in the tools.pl CGI script. Versions before 8.5.12G might be affected in non-default configurations. |
| CVE-2016-6287 | The "http-client" egg always used a HTTP_PROXY environment variable to determine whether HTTP traffic should be routed via a proxy, even when running as a CGI process. Under several web servers this would mean a user-supplied "Proxy" header could allow an attacker to direct all HTTP requests through a proxy (also known as a "httpoxy" attack). This affects all versions of http-client before 0.10. |
| CVE-2016-6286 | The "spiffy-cgi-handlers" egg would convert a nonexistent "Proxy" header to the HTTP_PROXY environment variable, which would allow attackers to direct CGI programs which use this environment variable to use an attacker-specified HTTP proxy server (also known as a "httpoxy" attack). This affects all versions of spiffy-cgi-handlers before 0.5. |
| CVE-2016-6277 | NETGEAR R6250 before 1.0.4.6.Beta, R6400 before 1.0.1.18.Beta, R6700 before 1.0.1.14.Beta, R6900, R7000 before 1.0.7.6.Beta, R7100LG before 1.0.0.28.Beta, R7300DST before 1.0.0.46.Beta, R7900 before 1.0.1.8.Beta, R8000 before 1.0.3.26.Beta, D6220, D6400, D7000, and possibly other routers allow remote attackers to execute arbitrary commands via shell metacharacters in the path info to cgi-bin/. |
| CVE-2016-5840 | hotfix_upload.cgi in Trend Micro Deep Discovery Inspector (DDI) 3.7, 3.8 SP1 (3.81), and 3.8 SP2 (3.82) allows remote administrators to execute arbitrary code via shell metacharacters in the filename parameter of the Content-Disposition header. |
| CVE-2016-5680 | Stack-based buffer overflow in cgi-bin/cgi_main in NUUO NVRmini 2 1.7.6 through 3.0.0 and NETGEAR ReadyNAS Surveillance 1.1.2 allows remote authenticated users to execute arbitrary code via the sn parameter to the transfer_license command. |
| CVE-2016-5679 | cgi-bin/cgi_main in NUUO NVRmini 2 1.7.6 through 3.0.0 and NETGEAR ReadyNAS Surveillance 1.1.2 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the sn parameter to the transfer_license command. |
| CVE-2016-5676 | cgi-bin/cgi_system in NUUO NVRmini 2 1.7.5 through 2.x, NUUO NVRsolo 1.7.5 through 2.x, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 allows remote attackers to reset the administrator password via a cmd=loaddefconfig action. |
| CVE-2016-5640 | Directory traversal vulnerability in cgi-bin/rftest.cgi on Crestron AirMedia AM-100 devices with firmware before 1.4.0.13 allows remote attackers to execute arbitrary commands via a .. (dot dot) in the ATE_COMMAND parameter. |
| CVE-2016-5639 | Directory traversal vulnerability in cgi-bin/login.cgi on Crestron AirMedia AM-100 devices with firmware before 1.4.0.13 allows remote attackers to read arbitrary files via a .. (dot dot) in the src parameter. |
| CVE-2016-5408 | Stack-based buffer overflow in the munge_other_line function in cachemgr.cgi in the squid package before 3.1.23-16.el6_8.6 in Red Hat Enterprise Linux 6 allows remote attackers to execute arbitrary code via unspecified vectors. NOTE: this vulnerability exists because of an incorrect fix for CVE-2016-4051. |
| CVE-2016-5388 | Apache Tomcat 7.x through 7.0.70 and 8.x through 8.5.4, when the CGI Servlet is enabled, follows RFC 3875 section 4.1.18 and therefore does not protect applications from the presence of untrusted client data in the HTTP_PROXY environment variable, which might allow remote attackers to redirect an application's outbound HTTP traffic to an arbitrary proxy server via a crafted Proxy header in an HTTP request, aka an "httpoxy" issue. NOTE: the vendor states "A mitigation is planned for future releases of Tomcat, tracked as CVE-2016-5388"; in other words, this is not a CVE ID for a vulnerability. |
| CVE-2016-5386 | The net/http package in Go through 1.6 does not attempt to address RFC 3875 section 4.1.18 namespace conflicts and therefore does not protect CGI applications from the presence of untrusted client data in the HTTP_PROXY environment variable, which might allow remote attackers to redirect a CGI application's outbound HTTP traffic to an arbitrary proxy server via a crafted Proxy header in an HTTP request, aka an "httpoxy" issue. |
| CVE-2016-5385 | PHP through 7.0.8 does not attempt to address RFC 3875 section 4.1.18 namespace conflicts and therefore does not protect applications from the presence of untrusted client data in the HTTP_PROXY environment variable, which might allow remote attackers to redirect an application's outbound HTTP traffic to an arbitrary proxy server via a crafted Proxy header in an HTTP request, as demonstrated by (1) an application that makes a getenv('HTTP_PROXY') call or (2) a CGI configuration of PHP, aka an "httpoxy" issue. |
| CVE-2016-5068 | Sierra Wireless GX 440 devices with ALEOS firmware 4.3.2 do not require authentication for Embedded_Ace_Get_Task.cgi requests. |
| CVE-2016-5065 | Sierra Wireless GX 440 devices with ALEOS firmware 4.3.2 allow Embedded_Ace_Set_Task.cgi command injection. |
| CVE-2016-4897 | Multiple cross-site scripting (XSS) vulnerabilities in (1) filter/save_forward.cgi, (2) filter/save.cgi, (3) /man/search.cgi in Usermin before 1.690. |
| CVE-2016-4869 | Cybozu Office 9.0.0 to 10.4.0 allow remote attackers to obtain session information via a page where CGI environment variables are displayed. |
| CVE-2016-4694 | The Apache HTTP Server in Apple OS X before 10.12 and OS X Server before 5.2 follows RFC 3875 section 4.1.18 and therefore does not protect applications from the presence of untrusted CGI client data in the HTTP_PROXY environment variable, which might allow remote attackers to redirect an application's outbound HTTP traffic to an arbitrary proxy server via a crafted Proxy header in an HTTP request, aka an "httpoxy" issue, a related issue to CVE-2016-5387. |
| CVE-2016-4051 | Buffer overflow in cachemgr.cgi in Squid 2.x, 3.x before 3.5.17, and 4.x before 4.0.9 might allow remote attackers to cause a denial of service or execute arbitrary code by seeding manager reports with crafted data. |
| CVE-2016-2332 | flu.cgi in the web interface on SysLINK SL-1000 Machine-to-Machine (M2M) Modular Gateway devices with firmware before 01A.8 allows remote authenticated users to execute arbitrary commands via the 5066 (aka dnsmasq) parameter. |
| CVE-2016-20017 | D-Link DSL-2750B devices before 1.05 allow remote unauthenticated command injection via the login.cgi cli parameter, as exploited in the wild in 2016 through 2022. |
| CVE-2016-1592 | XSS in NetIQ Designer for Identity Manager before 4.5.3 allows remote attackers to inject arbitrary HTML code via the nrfEntitlementReport.do CGI. |
| CVE-2016-1230 | Cross-site scripting (XSS) vulnerability in NTT PC Communications WebARENA Service formmail before 2.2.1 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2016-1212 | Directory traversal vulnerability in futomi MP Form Mail CGI Professional Edition 3.2.3 and earlier allows remote authenticated administrators to read arbitrary files via unspecified vectors. |
| CVE-2016-1157 | Cross-site scripting (XSS) vulnerability in log_chat.cgi in Script* Log-Chat before 2.0 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2016-11015 | NETGEAR JNR1010 devices before 1.0.0.32 allow cgi-bin/webproc CSRF via the :InternetGatewayDevice.X_TWSZ-COM_URL_Filter.BlackList.1.URL parameter. |
| CVE-2016-10802 | cPanel before 58.0.4 allows code execution in the context of other user accounts through the PHP CGI handler (SEC-142). |
| CVE-2016-10795 | cPanel before 59.9999.145 allows stored XSS in the WHM tail_upcp2.cgi interface (SEC-156). |
| CVE-2016-10774 | cPanel before 60.0.25 allows self XSS in the tail_ea4_migration.cgi interface (SEC-172). |
| CVE-2016-10769 | cPanel before 60.0.25 allows an open redirect via /cgi-sys/FormMail-clone.cgi (SEC-162). |
| CVE-2016-10760 | On Seowon Intech routers, there is a Command Injection vulnerability in diagnostic.cgi via shell metacharacters in the ping_ipaddr parameter. |
| CVE-2016-10176 | The NETGEAR WNR2000v5 router allows an administrator to perform sensitive actions by invoking the apply.cgi URL on the web server of the device. This special URL is handled by the embedded web server (uhttpd) and processed accordingly. The web server also contains another URL, apply_noauth.cgi, that allows an unauthenticated user to perform sensitive actions on the device. This functionality can be exploited to change the router settings (such as the answers to the password-recovery questions) and achieve remote code execution. |
| CVE-2016-10174 | The NETGEAR WNR2000v5 router contains a buffer overflow in the hidden_lang_avi parameter when invoking the URL /apply.cgi?/lang_check.html. This buffer overflow can be exploited by an unauthenticated attacker to achieve remote code execution. |
| CVE-2016-10106 | Directory traversal vulnerability in scgi-bin/platform.cgi on NETGEAR FVS336Gv3, FVS318N, FVS318Gv2, and SRX5308 devices with firmware before 4.3.3-8 allows remote authenticated users to read arbitrary files via a .. (dot dot) in the thispage parameter, as demonstrated by reading the /etc/shadow file. |
| CVE-2016-10043 | An issue was discovered in Radisys MRF Web Panel (SWMS) 9.0.1. The MSM_MACRO_NAME POST parameter in /swms/ms.cgi was discovered to be vulnerable to OS command injection attacks. It is possible to use the pipe character (|) to inject arbitrary OS commands and retrieve the output in the application's responses. Attackers could execute unauthorized commands, which could then be used to disable the software, or read, write, and modify data for which the attacker does not have permissions to access directly. Since the targeted application is directly executing the commands instead of the attacker, any malicious activities may appear to come from the application or the application's owner (apache user). |
| CVE-2016-10026 | ikiwiki 3.20161219 does not properly check if a revision changes the access permissions for a page on sites with the git and recentchanges plugins and the CGI interface enabled, which allows remote attackers to revert certain changes by leveraging permissions to change the page before the revision was made. |
| CVE-2016-1000111 | Twisted before 16.3.1 does not attempt to address RFC 3875 section 4.1.18 namespace conflicts and therefore does not protect CGI applications from the presence of untrusted client data in the HTTP_PROXY environment variable, which might allow remote attackers to redirect a CGI application's outbound HTTP traffic to an arbitrary proxy server via a crafted Proxy header in an HTTP request, aka an "httpoxy" issue. |
| CVE-2016-1000110 | The CGIHandler class in Python before 2.7.12 does not protect against the HTTP_PROXY variable name clash in a CGI script, which could allow a remote attacker to redirect HTTP requests. |
| CVE-2016-1000109 | HHVM does not attempt to address RFC 3875 section 4.1.18 namespace conflicts and therefore does not protect CGI applications from the presence of untrusted client data in the HTTP_PROXY environment variable, which might allow remote attackers to redirect a CGI application's outbound HTTP traffic to an arbitrary proxy server via a crafted Proxy header in an HTTP request, aka an "httpoxy" issue. This issue affects HHVM versions prior to 3.9.6, all versions between 3.10.0 and 3.12.4 (inclusive), and all versions between 3.13.0 and 3.14.2 (inclusive). |
| CVE-2016-1000108 | yaws before 2.0.4 does not attempt to address RFC 3875 section 4.1.18 namespace conflicts and therefore does not protect CGI applications from the presence of untrusted client data in the HTTP_PROXY environment variable, which might allow remote attackers to redirect a CGI application's outbound HTTP traffic to an arbitrary proxy server via a crafted Proxy header in an HTTP request, aka an "httpoxy" issue. |
| CVE-2015-8936 | Cross-site scripting (XSS) vulnerability in squidGuard.cgi in squidGuard before 1.5 allows remote attackers to inject arbitrary web script or HTML via a blocked site link. |
| CVE-2015-8508 | Cross-site scripting (XSS) vulnerability in showdependencygraph.cgi in Bugzilla 2.x, 3.x, and 4.x before 4.2.16, 4.3.x and 4.4.x before 4.4.11, and 4.5.x and 5.0.x before 5.0.2, when a local dot configuration is used, allows remote attackers to inject arbitrary web script or HTML via a crafted bug summary. |
| CVE-2015-8393 | pcregrep in PCRE before 8.38 mishandles the -q option for binary files, which might allow remote attackers to obtain sensitive information via a crafted file, as demonstrated by a CGI script that sends stdout data to a client. |
| CVE-2015-8289 | The password-recovery feature on NETGEAR D3600 devices with firmware 1.0.0.49 and D6000 devices with firmware 1.0.0.49 and earlier allows remote attackers to discover the cleartext administrator password by reading the cgi-bin/passrec.asp HTML source code. |
| CVE-2015-8255 | AXIS Communications products allow CSRF, as demonstrated by admin/pwdgrp.cgi, vaconfig.cgi, and admin/local_del.cgi. |
| CVE-2015-8212 | CGI handling flaw in bozohttpd in NetBSD 6.0 through 6.0.6, 6.1 through 6.1.5, and 7.0 allows remote attackers to execute arbitrary code via crafted arguments, which are handled by a non-CGI aware program. |
| CVE-2015-8010 | Cross-site scripting (XSS) vulnerability in the Classic-UI with the CSV export link and pagination feature in Icinga before 1.14 allows remote attackers to inject arbitrary web script or HTML via the query string to cgi-bin/status.cgi. |
| CVE-2015-7847 | Huawei MBB (Mobile Broadband) product E3272s with software versions earlier than E3272s-153TCPU-V200R002B491D09SP00C00 has a Denial of Service (DoS) vulnerability. An attacker could send a malicious packet to the Common Gateway Interface (CGI) of a target device and make it fail while setting the port attribute, which causes a DoS attack. |
| CVE-2015-7291 | Cross-site request forgery (CSRF) vulnerability in adv_pwd_cgi in the web management interface on Arris DG860A, TG862A, and TG862G devices with firmware TS0703128_100611 through TS0705125D_031115 allows remote attackers to hijack the authentication of arbitrary users. |
| CVE-2015-7290 | Cross-site scripting (XSS) vulnerability in adv_pwd_cgi in the web management interface on Arris DG860A, TG862A, and TG862G devices with firmware TS0703128_100611 through TS0705125D_031115 allows remote attackers to inject arbitrary web script or HTML via the pwd parameter. |
| CVE-2015-7252 | Cross-site scripting (XSS) vulnerability in cgi-bin/webproc on ZTE ZXHN H108N R1A devices before ZTE.bhs.ZXHNH108NR1A.k_PE allows remote attackers to inject arbitrary web script or HTML via the errorpage parameter. |
| CVE-2015-7250 | Absolute path traversal vulnerability in cgi-bin/webproc on ZTE ZXHN H108N R1A devices before ZTE.bhs.ZXHNH108NR1A.k_PE allows remote attackers to read arbitrary files via a full pathname in the getpage parameter. |
| CVE-2015-7249 | ZTE ZXHN H108N R1A devices before ZTE.bhs.ZXHNH108NR1A.k_PE allow remote authenticated users to bypass intended access restrictions via a modified request, as demonstrated by leveraging the support account to change a password via a cgi-bin/webproc accountpsd action. |
| CVE-2015-7248 | ZTE ZXHN H108N R1A devices before ZTE.bhs.ZXHNH108NR1A.k_PE allow remote attackers to discover usernames and password hashes by reading the cgi-bin/webproc HTML source code, a different vulnerability than CVE-2015-8703. |
| CVE-2015-6913 | Cross-site scripting (XSS) vulnerability in the "Create download task via URL" feature in Synology Download Station before 3.5-2967 allows remote attackers to inject arbitrary web script or HTML via the urls parameter in an add_url_task action to dlm/downloadman.cgi. |
| CVE-2015-6912 | Synology Video Station before 1.5-0763 allows remote attackers to execute arbitrary shell commands via shell metacharacters in the subtitle_codepage parameter to subtitle.cgi. |
| CVE-2015-6911 | SQL injection vulnerability in Synology Video Station before 1.5-0763 allows remote attackers to execute arbitrary SQL commands via the id parameter to watchstatus.cgi. |
| CVE-2015-6910 | SQL injection vulnerability in Synology Video Station before 1.5-0757 allows remote attackers to execute arbitrary SQL commands via the id parameter to audiotrack.cgi. |
| CVE-2015-6435 | An unspecified CGI script in Cisco FX-OS before 1.1.2 on Firepower 9000 devices and Cisco Unified Computing System (UCS) Manager before 2.2(4b), 2.2(5) before 2.2(5a), and 3.0 before 3.0(2e) allows remote attackers to execute arbitrary shell commands via a crafted HTTP request, aka Bug ID CSCur90888. |
| CVE-2015-6024 | ping.cgi in NetCommWireless HSPA 3G10WVE wireless routers with firmware before 3G10WVE-L101-S306ETS-C01_R05 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the DIA_IPADDRESS parameter. |
| CVE-2015-6023 | ping.cgi in NetCommWireless HSPA 3G10WVE wireless routers with firmware before 3G10WVE-L101-S306ETS-C01_R05 allows remote attackers to bypass intended access restrictions via a direct request. NOTE: this issue can be combined with CVE-2015-6024 to execute arbitrary commands. |
| CVE-2015-5999 | Multiple cross-site request forgery (CSRF) vulnerabilities in the D-Link DIR-816L Wireless Router with firmware before 2.06.B09_BETA allow remote attackers to hijack the authentication of administrators for requests that (1) change the admin password, (2) change the network policy, or (3) possibly have other unspecified impact via crafted requests to hedwig.cgi and pigwidgeon.cgi. |
| CVE-2015-5993 | Buffer overflow in form2ping.cgi on Philippine Long Distance Telephone (PLDT) SpeedSurf 504AN devices with firmware GAN9.8U26-4-TX-R6B018-PH.EN and Kasda KW58293 devices allows remote attackers to cause a denial of service (device outage) via a long ipaddr parameter. |
| CVE-2015-5992 | Cross-site scripting (XSS) vulnerability in form2WlanSetup.cgi on Philippine Long Distance Telephone (PLDT) SpeedSurf 504AN devices with firmware GAN9.8U26-4-TX-R6B018-PH.EN and Kasda KW58293 devices allows remote attackers to inject arbitrary web script or HTML via the ssid parameter. |
| CVE-2015-5991 | Cross-site request forgery (CSRF) vulnerability in form2WlanSetup.cgi on Philippine Long Distance Telephone (PLDT) SpeedSurf 504AN devices with firmware GAN9.8U26-4-TX-R6B018-PH.EN and Kasda KW58293 devices allows remote attackers to hijack the authentication of administrators for requests that perform setup operations, as demonstrated by modifying network settings. |
| CVE-2015-5718 | Stack-based buffer overflow in the handle_debug_network function in the manager in Websense Content Gateway before 8.0.0 HF02 allows remote administrators to cause a denial of service (crash) via a crafted diagnostic command line request to submit_net_debug.cgi. |
| CVE-2015-5082 | Endian Firewall before 3.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) NEW_PASSWORD_1 or (2) NEW_PASSWORD_2 parameter to cgi-bin/chpasswd.cgi. |
| CVE-2015-4655 | Cross-site scripting (XSS) vulnerability in Synology DiskStation Manager (DSM) before 5.2-5565 Update 1 allows remote attackers to inject arbitrary web script or HTML via the "compound" parameter to entry.cgi. |
| CVE-2015-3628 | The iControl API in F5 BIG-IP LTM, AFM, Analytics, APM, ASM, Link Controller, and PEM 11.3.0 before 11.5.3 HF2 and 11.6.0 before 11.6.0 HF6, BIG-IP AAM 11.4.0 before 11.5.3 HF2 and 11.6.0 before 11.6.0 HF6, BIG-IP Edge Gateway, WebAccelerator, and WOM 11.3.0, BIG-IP GTM 11.3.0 before 11.6.0 HF6, BIG-IP PSM 11.3.0 through 11.4.1, Enterprise Manager 3.1.0 through 3.1.1, BIG-IQ Cloud and Security 4.0.0 through 4.5.0, BIG-IQ Device 4.2.0 through 4.5.0, and BIG-IQ ADC 4.5.0 allows remote authenticated users with the "Resource Administrator" role to gain privileges via an iCall (1) script or (2) handler in a SOAP request to iControl/iControlPortal.cgi. |
| CVE-2015-2990 | Directory traversal vulnerability in zhtml.cgi in NEOJAPAN desknet NEO 2.0R1.0 through 2.5R1.4 allows remote authenticated users to read arbitrary files via a crafted parameter. |
| CVE-2015-2962 | CGI RESCUE BloBee 1.20 and earlier allows remote attackers to write to arbitrary files, and consequently execute arbitrary code, via unspecified vectors. |
| CVE-2015-2945 | mt-phpincgi.php in Hajime Fujimoto mt-phpincgi before 2015-05-15 does not properly restrict URLs, which allows remote attackers to conduct PHP object injection attacks and execute arbitrary PHP code via a crafted request, as exploited in the wild in May 2015. |
| CVE-2015-2884 | Philips In.Sight B120/37 allows remote attackers to obtain sensitive information via a direct request, related to yoics.net URLs, stream.m3u8 URIs, and cam_service_enable.cgi. |
| CVE-2015-2797 | Stack-based buffer overflow in AirTies Air 6372, 5760, 5750, 5650TT, 5453, 5444TT, 5443, 5442, 5343, 5342, 5341, and 5021 DSL modems with firmware 1.0.2.0 and earlier allows remote attackers to execute arbitrary code via a long string in the redirect parameter to cgi-bin/login. |
| CVE-2015-2793 | Cross-site scripting (XSS) vulnerability in templates/openid-selector.tmpl in ikiwiki before 3.20150329 allows remote attackers to inject arbitrary web script or HTML via the openid_identifier parameter in a verify action to ikiwiki.cgi. |
| CVE-2015-2781 | Cross-site scripting (XSS) vulnerability in cgi-bin/hotspotlogin.cgi in Hotspot Express hotEx Billing Manager 73 allows remote attackers to inject arbitrary web script or HTML via the reply parameter. |
| CVE-2015-2703 | Multiple cross-site scripting (XSS) vulnerabilities in Websense TRITON AP-WEB before 8.0.0 and V-Series 7.7 appliances allow remote attackers to inject arbitrary web script or HTML via the (1) ws-userip in the ws-encdata parameter to cve-bin/moreBlockInfo.cgi in the Data Security block page or (2) admin_msg parameter to configure/ssl_ui/eva-config/client-cert-import_wsoem.html in the Content Gateway, which is not properly handled in an error message. |
| CVE-2015-2280 | snwrite.cgi in AirLink101 SkyIPCam1620W Wireless N MPEG4 3GPP network camera with firmware FW_AIC1620W_1.1.0-12_20120709_r1192.pck allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the mac parameter. |
| CVE-2015-2279 | cgi_test.cgi in AirLive BU-2015 with firmware 1.03.18, BU-3026 with firmware 1.43, and MD-3025 with firmware 1.81 allows remote attackers to execute arbitrary OS commands via shell metacharacters after an "&" (ampersand) in the write_mac write_pid, write_msn, write_tan, or write_hdv parameter. |
| CVE-2015-2248 | Cross-site request forgery (CSRF) vulnerability in the user portal in Dell SonicWALL Secure Remote Access (SRA) products with firmware before 7.5.1.0-38sv and 8.x before 8.0.0.1-16sv allows remote attackers to hijack the authentication of users for requests that create bookmarks via a crafted request to cgi-bin/editBookmark. |
| CVE-2015-2103 | Cross-site scripting (XSS) vulnerability in the admin-login panel (admin/index.cgi) in Cosmoshop allows remote attackers to inject arbitrary web script or HTML via the username field (u_name parameter). |
| CVE-2015-2011 | The xmlrpc.cgi Webmin script in IBM QRadar SIEM 7.1 MR2 before Patch 11 IF02 and 7.2.x before 7.2.5 Patch 4 allows remote authenticated users to execute arbitrary commands with root privileges via unspecified vectors. |
| CVE-2015-2009 | Cross-site request forgery (CSRF) vulnerability in the xmlrpc.cgi service in IBM QRadar SIEM 7.1 before MR2 Patch 11 Interim Fix 02 and 7.2.x before 7.2.5 Patch 4 allows remote attackers to hijack the authentication of arbitrary users for requests that insert XSS sequences via vectors related to webmin. IBM X-Force ID: 103921. |
| CVE-2015-1444 | Multiple cross-site scripting (XSS) vulnerabilities in the web administration frontend in the httpd package in fli4l before 3.10.1 and 4.0 before 2015-01-30 allow remote attackers to inject arbitrary web script or HTML via the (1) conntrack.cgi, (2) index.cgi, (3) log_syslog.cgi, (4) problems.cgi, (5) status.cgi, (6) status_network.cgi, or (7) status_system.cgi script in admin/. |
| CVE-2015-1159 | Cross-site scripting (XSS) vulnerability in the cgi_puts function in cgi-bin/template.c in the template engine in CUPS before 2.0.3 allows remote attackers to inject arbitrary web script or HTML via the QUERY parameter to help/. |
| CVE-2015-1028 | Multiple cross-site scripting (XSS) vulnerabilities in D-Link DSL-2730B router (rev C1) with firmware GE_1.01 allow remote authenticated users to inject arbitrary web script or HTML via the (1) domainname parameter to dnsProxy.cmd (DNS Proxy Configuration Panel); the (2) brName parameter to lancfg2get.cgi (Lan Configuration Panel); the (3) wlAuthMode, (4) wl_wsc_reg, or (5) wl_wsc_mode parameter to wlsecrefresh.wl (Wireless Security Panel); or the (6) wlWpaPsk parameter to wlsecurity.wl (Wireless Password Viewer). |
| CVE-2015-0900 | Cross-site scripting (XSS) vulnerability in schedule.cgi in Nishishi Factory Fumy Teacher's Schedule Board 1.10 through 2.21 allows remote attackers to inject arbitrary web script or HTML via a crafted URL. |
| CVE-2015-0898 | futomi CGI Cafe MP Form Mail CGI eCommerce before 2.0.12 on Windows allows remote attackers to execute arbitrary Perl code via unspecified vectors. |
| CVE-2015-0893 | Cross-site scripting (XSS) vulnerability in Maroyaka CGI Maroyaka Relay Novel allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2015-0892 | Cross-site scripting (XSS) vulnerability in Maroyaka CGI Maroyaka Image Album allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2015-0891 | Cross-site scripting (XSS) vulnerability in Maroyaka CGI Maroyaka Simple Board allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2015-0883 | SYNCK GRAPHICA Mailform Pro CGI 4.1.4 and 4.1.5, when the mailauth module is enabled, does not properly send e-mail messages, which allows remote attackers to execute arbitrary code via unspecified vectors. |
| CVE-2015-0877 | Unrestricted file upload vulnerability in app/lib/mlf.pl in C-BOARD Moyuku before 1.03b3 allows remote attackers to execute arbitrary code by uploading a file with a \0 character in its name. |
| CVE-2015-0871 | Cross-site scripting (XSS) vulnerability in Mrs. Shiromuku Perl CGI shiromuku(u1)GUESTBOOK 1.62 and earlier allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2015-0870 | Cross-site scripting (XSS) vulnerability in hb.cgi in Nishishi Factory Fumy News Clipper 2.x before 2.5.0 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2015-0868 | Unrestricted file upload vulnerability in Mrs. Shiromuku Perl CGI shiromuku(bu2)BBS before 2.91 allows remote attackers to execute arbitrary code by uploading an executable file. |
| CVE-2015-0867 | Directory traversal vulnerability in SYNCK GRAPHICA Download Log CGI 3.0 and earlier allows remote attackers to read arbitrary files via a crafted filename. |
| CVE-2015-0859 | The Debian build procedure for the smokeping package in wheezy before 2.6.8-2+deb7u1 and jessie before 2.6.9-1+deb8u1 does not properly configure the way Apache httpd passes arguments to smokeping_cgi, which allows remote attackers to execute arbitrary code via crafted CGI arguments. |
| CVE-2015-0787 | XSS in NetIQ Designer for Identity Manager before 4.5.3 allows remote attackers to inject arbitrary HTML code via the accessMgrDN value of the forgotUser.do CGI. |
| CVE-2014-9727 | AVM Fritz!Box allows remote attackers to execute arbitrary commands via shell metacharacters in the var:lang parameter to cgi-bin/webcm. |
| CVE-2014-9711 | Multiple cross-site scripting (XSS) vulnerabilities in the Investigative Reports in Websense TRITON AP-WEB before 8.0.0 and Web Security and Filter, Web Security Gateway, and Web Security Gateway Anywhere 7.8.3 before Hotfix 02 and 7.8.4 before Hotfix 01 allow remote attackers to inject arbitrary web script or HTML via the (1) ReportName (Job Name) parameter to the Explorer report scheduler (cgi-bin/WsCgiExplorerSchedule.exe) in the Job Queue or the col parameter to the (2) Names or (3) Anonymous (explorer_wse/explorer_anon.exe) summary report page. |
| CVE-2014-9518 | Cross-site scripting (XSS) vulnerability in login.cgi in D-Link router DIR-655 (rev Bx) with firmware before 2.12b01 allows remote attackers to inject arbitrary web script or HTML via the html_response_page parameter. |
| CVE-2014-9431 | Multiple cross-site request forgery (CSRF) vulnerabilities in Smoothwall Express 3.1 and 3.0 SP3 allow remote attackers to hijack the authentication of administrators for requests that change the (1) admin or (2) dial password via a request to httpd/cgi-bin/changepw.cgi. |
| CVE-2014-9430 | Cross-site scripting (XSS) vulnerability in httpd/cgi-bin/vpn.cgi/vpnconfig.dat in Smoothwall Express 3.0 SP3 allows remote attackers to inject arbitrary web script or HTML via the COMMENT parameter in an Add action. |
| CVE-2014-9429 | Multiple cross-site scripting (XSS) vulnerabilities in Smoothwall Express 3.1 and 3.0 SP3 allow remote attackers to inject arbitrary web script or HTML via the (1) PROFILENAME parameter in a Save action to httpd/cgi-bin/pppsetup.cgi or (2) COMMENT parameter in an Add action to httpd/cgi-bin/ddns.cgi. |
| CVE-2014-9427 | sapi/cgi/cgi_main.c in the CGI component in PHP through 5.4.36, 5.5.x through 5.5.20, and 5.6.x through 5.6.4, when mmap is used to read a .php file, does not properly consider the mapping's length during processing of an invalid file that begins with a # character and lacks a newline character, which causes an out-of-bounds read and might (1) allow remote attackers to obtain sensitive information from php-cgi process memory by leveraging the ability to upload a .php file or (2) trigger unexpected code execution if a valid PHP script is present in memory locations adjacent to the mapping. |
| CVE-2014-9345 | SQL injection vulnerability in Guruperl.net Advertise With Pleasure! Professional (aka AWP PRO) 6.6 and earlier allows remote attackers to execute arbitrary SQL commands via the group_id parameter in a list_zone action to cgi/client.cgi. |
| CVE-2014-9239 | SQL injection vulnerability in the IPS Connect service (interface/ipsconnect/ipsconnect.php) in Invision Power Board (aka IPB or IP.Board) 3.3.x and 3.4.x through 3.4.7 before 20141114 allows remote attackers to execute arbitrary SQL commands via the id[] parameter. |
| CVE-2014-9238 | D-link IP camera DCS-2103 with firmware 1.0.0 allows remote attackers to obtain the installation path via the file parameter to cgi-bin/sddownload.cgi, as demonstrated by a / (forward slash) character. |
| CVE-2014-9234 | Directory traversal vulnerability in cgi-bin/sddownload.cgi in D-link IP camera DCS-2103 with firmware 1.0.0 allows remote attackers to read arbitrary files via a .. (dot dot) in the file parameter. |
| CVE-2014-9184 | ZTE ZXDSL 831CII allows remote attackers to bypass authentication via a direct request to (1) main.cgi, (2) adminpasswd.cgi, (3) userpasswd.cgi, (4) upload.cgi, (5) conprocess.cgi, or (6) connect.cgi. |
| CVE-2014-9057 | SQL injection vulnerability in the XML-RPC interface in Movable Type before 5.18, 5.2.x before 5.2.11, and 6.x before 6.0.6 allows remote attackers to execute arbitrary SQL commands via unspecified vectors. |
| CVE-2014-9021 | Multiple cross-site scripting (XSS) vulnerabilities in ZTE ZXDSL 831 allow remote attackers to inject arbitrary web script or HTML via the (1) tr69cAcsURL, (2) tr69cAcsUser, (3) tr69cAcsPwd, (4) tr69cConnReqPwd, or (5) tr69cDebugEnable parameter to the TR-069 client page (tr69cfg.cgi); the (6) timezone parameter to the Time and date page (sntpcfg.sntp); or the (7) hostname parameter in a save action to the Quick Stats page (psilan.cgi). NOTE: this issue was SPLIT from CVE-2014-9020 per ADT1 due to different affected products and codebases. |
| CVE-2014-9020 | Cross-site scripting (XSS) vulnerability in the Quick Stats page (psilan.cgi) in ZTE ZXDSL 831 and 831CII allows remote attackers to inject arbitrary web script or HTML via the domainname parameter in a save action. NOTE: this issue was SPLIT from CVE-2014-9021 per ADT1 due to different affected products and codebases. |
| CVE-2014-9019 | Multiple cross-site request forgery (CSRF) vulnerabilities in ZTE ZXDSL 831CII allow remote attackers to hijack the authentication of administrators for requests that (1) change the admin user name or (2) conduct cross-site scripting (XSS) attacks via the sysUserName parameter in a save action to adminpasswd.cgi or (3) change the admin user password via the sysPassword parameter in a save action to adminpasswd.cgi. |
| CVE-2014-8630 | Bugzilla before 4.0.16, 4.1.x and 4.2.x before 4.2.12, 4.3.x and 4.4.x before 4.4.7, and 5.x before 5.0rc1 allows remote authenticated users to execute arbitrary commands by leveraging the editcomponents privilege and triggering crafted input to a two-argument Perl open call, as demonstrated by shell metacharacters in a product name. |
| CVE-2014-8600 | Multiple cross-site scripting (XSS) vulnerabilities in KDE-Runtime 4.14.3 and earlier, kwebkitpart 1.3.4 and earlier, and kio-extras 5.1.1 and earlier allow remote attackers to inject arbitrary web script or HTML via a crafted URI using the (1) zip, (2) trash, (3) tar, (4) thumbnail, (5) smtps, (6) smtp, (7) smb, (8) remote, (9) recentdocuments, (10) nntps, (11) nntp, (12) network, (13) mbox, (14) ldaps, (15) ldap, (16) fonts, (17) file, (18) desktop, (19) cgi, (20) bookmarks, or (21) ar scheme, which is not properly handled in an error message. |
| CVE-2014-8389 | cgi-bin/mft/wireless_mft.cgi in AirLive BU-2015 with firmware 1.03.18 16.06.2014, AirLive BU-3026 with firmware 1.43 21.08.2014, AirLive MD-3025 with firmware 1.81 21.08.2014, AirLive WL-2000CAM with firmware LM.1.6.18 14.10.2011, and AirLive POE-200CAM v2 with firmware LM.1.6.17.01 uses hard-coded credentials in the embedded Boa web server, which allows remote attackers to obtain user credentials via crafted HTTP requests. |
| CVE-2014-8387 | cgi/utility.cgi in Advantech EKI-6340 2.05 Wi-Fi Mesh Access Point allows remote authenticated users to execute arbitrary commands via shell metacharacters in the pinghost parameter to ping.cgi. |
| CVE-2014-8384 | The InFocus IN3128HD projector with firmware 0.26 does not restrict access to cgi-bin/webctrl.cgi.elf, which allows remote attackers to modify the DHCP server and device IP configuration, reboot the device, change the device name, and have other unspecified impact via a crafted request. |
| CVE-2014-7999 | Cisco-Meraki MS, MR, and MX devices with firmware before 2014-09-24 allow remote authenticated users to install arbitrary firmware by leveraging unspecified HTTP handler access on the local network, aka Cisco-Meraki defect ID 00478565. |
| CVE-2014-7993 | Cisco-Meraki MS, MR, and MX devices with firmware before 2014-09-24 allow remote attackers to obtain sensitive credential information by leveraging unspecified HTTP handler access on the local network, aka Cisco-Meraki defect ID 00302012. |
| CVE-2014-7859 | Stack-based buffer overflow in login_mgr.cgi in D-Link firmware DNR-320L and DNS-320LW before 1.04b08, DNR-322L before 2.10 build 03, DNR-326 before 2.10 build 03, and DNS-327L before 1.04b01 allows remote attackers to execute arbitrary code by crafting malformed "Host" and "Referer" header values. |
| CVE-2014-7857 | D-Link DNS-320L firmware before 1.04b12, DNS-327L before 1.03b04 Build0119, DNR-326 1.40b03, DNS-320B 1.02b01, DNS-345 1.03b06, DNS-325 1.05b03, and DNS-322L 2.00b07 allow remote attackers to bypass authentication and log in with administrator permissions by passing the cgi_set_wto command in the cmd parameter, and setting the spawned session's cookie to username=admin. |
| CVE-2014-7237 | lib/TWiki/Sandbox.pm in TWiki 6.0.0 and earlier, when running on Windows, allows remote attackers to bypass intended access restrictions and upload files with restricted names via a null byte (%00) in a filename to bin/upload.cgi, as demonstrated using .htaccess to execute arbitrary code. |
| CVE-2014-7169 | GNU Bash through 4.3 bash43-025 processes trailing strings after certain malformed function definitions in the values of environment variables, which allows remote attackers to write to files or possibly have unknown other impact via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-6271. |
| CVE-2014-6616 | Cross-site scripting (XSS) vulnerability in Softing FG-100 PROFIBUS Single Channel (FG-100-PB) with firmware FG-x00-PB_V2.02.0.00 allows remote attackers to inject arbitrary web script or HTML via the DEVICE_NAME parameter to cgi-bin/CFGhttp/. |
| CVE-2014-6437 | Aztech ADSL DSL5018EN (1T1R), DSL705E, and DSL705EU devices allow remote attackers to obtain sensitive device configuration information via vectors involving the ROM file. |
| CVE-2014-6435 | cgi-bin/AZ_Retrain.cgi in Aztech ADSL DSL5018EN (1T1R), DSL705E, and DSL705EU devices does not check for authentication, which allows remote attackers to cause a denial of service (WAN connectivity reset) via a direct request. |
| CVE-2014-6278 | GNU Bash through 4.3 bash43-026 does not properly parse function definitions in the values of environment variables, which allows remote attackers to execute arbitrary commands via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-6271, CVE-2014-7169, and CVE-2014-6277. |
| CVE-2014-6277 | GNU Bash through 4.3 bash43-026 does not properly parse function definitions in the values of environment variables, which allows remote attackers to execute arbitrary code or cause a denial of service (uninitialized memory access, and untrusted-pointer read and write operations) via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-6271 and CVE-2014-7169. |
| CVE-2014-6271 | GNU Bash through 4.3 processes trailing strings after function definitions in the values of environment variables, which allows remote attackers to execute arbitrary code via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution, aka "ShellShock." NOTE: the original fix for this issue was incorrect; CVE-2014-7169 has been assigned to cover the vulnerability that is still present after the incorrect fix. |
| CVE-2014-5348 | Cross-site scripting (XSS) vulnerability in apps/zxtm/locallog.cgi in Riverbed Stingray (aka SteelApp) Traffic Manager Virtual Appliance 9.6 patchlevel 9620140312 allows remote attackers to inject arbitrary web script or HTML via the logfile parameter. |
| CVE-2014-5073 | vmtadmin.cgi in VMTurbo Operations Manager before 4.6 build 28657 allows remote attackers to execute arbitrary commands via shell metacharacters in the fileDate parameter in a DOWN call. |
| CVE-2014-4977 | Multiple SQL injection vulnerabilities in Dell SonicWall Scrutinizer 11.0.1 allow remote authenticated users to execute arbitrary SQL commands via the (1) selectedUserGroup parameter in a create new user request to cgi-bin/admin.cgi or the (2) user_id parameter in the changeUnit function, (3) methodDetail parameter in the methodDetail function, or (4) xcNetworkDetail parameter in the xcNetworkDetail function in d4d/exporters.php. |
| CVE-2014-4976 | Dell SonicWall Scrutinizer 11.0.1 allows remote authenticated users to change user passwords via the user ID in the savePrefs parameter in a change password request to cgi-bin/admin.cgi. |
| CVE-2014-4650 | The CGIHTTPServer module in Python 2.7.5 and 3.3.4 does not properly handle URLs in which URL encoding is used for path separators, which allows remote attackers to read script source code or conduct directory traversal attacks and execute unintended code via a crafted character sequence, as demonstrated by a %2f separator. |
| CVE-2014-3936 | Stack-based buffer overflow in the do_hnap function in www/my_cgi.cgi in D-Link DSP-W215 (Rev. A1) with firmware 1.01b06 and earlier, DIR-505 with firmware before 1.08b10, and DIR-505L with firmware 1.01 and earlier allows remote attackers to execute arbitrary code via a long Content-Length header in a GetDeviceSettings action in an HNAP request. |
| CVE-2014-3928 | Cougar-LG stores sensitive information under the web root with insufficient access control, which allows remote attackers to obtain credentials. |
| CVE-2014-3926 | Cross-site scripting (XSS) vulnerability in lg.cgi in Cougar LG 1.9 allows remote attackers to inject arbitrary web script or HTML via the "addr" parameter. |
| CVE-2014-3896 | Multiple cross-site request forgery (CSRF) vulnerabilities in CGI programs in Seeds acmailer before 3.8.17 and 3.9.x before 3.9.10 Beta allow remote attackers to hijack the authentication of arbitrary users for requests that modify or delete data, as demonstrated by modifying data affecting authorization. |
| CVE-2014-3851 | usr/lib/cgi-bin/create_passwd_file.py in Pyplate 0.08 uses world-readable permissions for passwd.db, which allows local users to obtain the administrator password by reading this file. |
| CVE-2014-3806 | Directory traversal vulnerability in cgi-bin/help/doIt.cgi in VMTurbo Operations Manager before 4.6 allows remote attackers to read arbitrary files via a .. (dot dot) in the xml_path parameter. |
| CVE-2014-3761 | Cross-site scripting (XSS) vulnerability in D-Link DAP 1150 with firmware 1.2.94 allows remote attackers to inject arbitrary web script or HTML via the res_buf parameter to index.cgi in the Control/URL-filter section. |
| CVE-2014-3760 | Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP 1150 with firmware 1.2.94 allow remote attackers to hijack the authentication of administrators for requests that (1) enable or (2) disable the DMZ in the Firewall/DMZ section via a request to index.cgi or (3) add, (4) modify, or (5) delete URL-filter settings in the Control/URL-filter section via a request to index.cgi, as demonstrated by adding a rule that blocks access to google.com. |
| CVE-2014-3719 | Multiple SQL injection vulnerabilities in cgi-bin/review_m.cgi in Ex Libris ALEPH 500 (Integrated library management system) 18.1 and 20 allow remote attackers to execute arbitrary SQL commands via the (1) find, (2) lib, or (3) sid parameter. |
| CVE-2014-3718 | Multiple cross-site scripting (XSS) vulnerabilities in cgi-bin/tag_m.cgi in Ex Libris ALEPH 500 (Integrated library management system) 18.1 and 20 allow remote attackers to inject arbitrary web script or HTML via the (1) find, (2) lib, or (3) sid parameter. |
| CVE-2014-3080 | Multiple cross-site scripting (XSS) vulnerabilities on IBM GCM16 and GCM32 Global Console Manager switches with firmware before 1.20.20.23447 allow remote attackers to inject arbitrary web script or HTML via (1) the query string to kvm.cgi or (2) the key parameter to avctalert.php. |
| CVE-2014-2969 | NETGEAR GS108PE Prosafe Plus switches with firmware 1.2.0.5 have a hardcoded password of debugpassword for the ntgruser account, which allows remote attackers to upload firmware or read or modify memory contents, and consequently execute arbitrary code, via a request to (1) produce_burn.cgi, (2) register_debug.cgi, or (3) bootcode_update.cgi. |
| CVE-2014-2962 | Absolute path traversal vulnerability in the webproc cgi module on the Belkin N150 F9K1009 v1 router with firmware before 1.00.08 allows remote attackers to read arbitrary files via a full pathname in the getpage parameter. |
| CVE-2014-2925 | Cross-site scripting (XSS) vulnerability in Advanced_Wireless_Content.asp in ASUS RT-AC68U and other RT series routers with firmware before 3.0.0.4.374.5047 allows remote attackers to inject arbitrary web script or HTML via the current_page parameter to apply.cgi. |
| CVE-2014-2875 | The session.lua library in CGILua 5.2 alpha 1 and 5.2 alpha 2 uses weak session IDs generated based on OS time, which allows remote attackers to hijack arbitrary sessions via a brute force attack. NOTE: CVE-2014-10399 and CVE-2014-10400 were SPLIT from this ID. |
| CVE-2014-2386 | Multiple off-by-one errors in Icinga, possibly 1.10.2 and earlier, allow remote attackers to cause a denial of service (crash) via unspecified vectors to the (1) display_nav_table, (2) print_export_link, (3) page_num_selector, or (4) page_limit_selector function in cgi/cgiutils.c or (5) status_page_num_selector function in cgi/status.c, which triggers a stack-based buffer overflow. |
| CVE-2014-2356 | Innominate mGuard before 7.6.4 and 8.x before 8.0.3 does not require authentication for snapshot downloads, which allows remote attackers to obtain sensitive information via a crafted HTTPS request. |
| CVE-2014-2301 | OrbiTeam BSCW before 5.0.8 allows remote attackers to obtain sensitive metadata via the inf operations (op=inf) to an object in pub/bscw.cgi/. |
| CVE-2014-2081 | Multiple SQL injection vulnerabilities in the login in web_reports/cgi-bin/InfoStation.cgi in Innovative vtls-Virtua before 2013.2.4 and 2014.x before 2014.1.1 allow remote attackers to execute arbitrary SQL commands via the (1) username or (2) password parameter. |
| CVE-2014-2046 | cgi-bin/rpcBridge in the web interface 1.1 on Broadcom Ltd PIPA C211 rev2 does not properly restrict access, which allows remote attackers to (1) obtain credentials and other sensitive information via a certain request to the config.getValuesHashExcludePaths method or (2) modify the firmware via unspecified vectors. |
| CVE-2014-1987 | The CGI component in Cybozu Garoon 3.1.0 through 3.7 SP3 allows remote attackers to execute arbitrary commands via unspecified vectors. |
| CVE-2014-1878 | Stack-based buffer overflow in the cmd_submitf function in cgi/cmd.c in Nagios Core, possibly 4.0.3rc1 and earlier, and Icinga before 1.8.6, 1.9 before 1.9.5, and 1.10 before 1.10.3 allows remote attackers to cause a denial of service (segmentation fault) via a long message to cmd.cgi. |
| CVE-2014-1635 | Buffer overflow in login.cgi in MiniHttpd in Belkin N750 Router with firmware before F9K1103_WW_1.10.17m allows remote attackers to execute arbitrary code via a long string in the jump parameter. |
| CVE-2014-1573 | Bugzilla 2.x through 4.0.x before 4.0.15, 4.1.x and 4.2.x before 4.2.11, 4.3.x and 4.4.x before 4.4.6, and 4.5.x before 4.5.6 does not ensure that a scalar context is used for certain CGI parameters, which allows remote attackers to conduct cross-site scripting (XSS) attacks by sending three values for a single parameter name. |
| CVE-2014-1572 | The confirm_create_account function in the account-creation feature in token.cgi in Bugzilla 2.x through 4.0.x before 4.0.15, 4.1.x and 4.2.x before 4.2.11, 4.3.x and 4.4.x before 4.4.6, and 4.5.x before 4.5.6 does not specify a scalar context for the realname parameter, which allows remote attackers to create accounts with unverified e-mail addresses by sending three realname values with realname=login_name as the second, as demonstrated by selecting an e-mail address with a domain name for which group privileges are automatically granted. |
| CVE-2014-1546 | The response function in the JSONP endpoint in WebService/Server/JSONRPC.pm in jsonrpc.cgi in Bugzilla 3.x and 4.x before 4.0.14, 4.1.x and 4.2.x before 4.2.10, 4.3.x and 4.4.x before 4.4.5, and 4.5.x before 4.5.5 accepts certain long callback values and does not restrict the initial bytes of a JSONP response, which allows remote attackers to conduct cross-site request forgery (CSRF) attacks, and obtain sensitive information, via a crafted OBJECT element with SWF content consistent with the _bz_callback character set. |
| CVE-2014-125077 | A vulnerability, which was classified as critical, has been found in pointhi searx_stats. This issue affects some unknown processing of the file cgi/cron.php. The manipulation leads to sql injection. The patch is named 281bd679a4474ddb222d16c1c380f252839cc18f. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-218351. |
| CVE-2014-10028 | Cross-site scripting (XSS) vulnerability in D-Link DAP-1360 router with firmware 2.5.4 and later allows remote attackers to inject arbitrary web script or HTML via the res_buf parameter to index.cgi when res_config_id is set to 41. |
| CVE-2014-10027 | Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP-1360 router with firmware 2.5.4 and earlier allow remote attackers to hijack the authentication of unspecified users for requests that (1) change the MAC filter restrict mode, (2) add a MAC address to the filter, or (3) remove a MAC address from the filter via a crafted request to index.cgi. |
| CVE-2014-10026 | index.cgi in D-Link DAP-1360 with firmware 2.5.4 and earlier allows remote attackers to bypass authentication and obtain sensitive information by setting the client_login cookie to admin. |
| CVE-2014-10025 | Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP-1360 with firmware 2.5.4 and earlier allow remote attackers to hijack the authentication of unspecified users for requests that change the (1) Enable Wireless, (2) MBSSID, (3) BSSID, (4) Hide Access Point, (5) SSID, (6) Country, (7) Channel, (8) Wireless mode, or (9) Max Associated Clients setting via a crafted request to index.cgi. |
| CVE-2014-10011 | Stack-based buffer overflow in UltraCamLib in the UltraCam ActiveX Control (UltraCamX.ocx) for the TRENDnet SecurView camera TV-IP422WN allows remote attackers to execute arbitrary code via a long string to the (1) CGI_ParamSet, (2) OpenFileDlg, (3) SnapFileName, (4) Password, (5) SetCGIAPNAME, (6) AccountCode, or (7) RemoteHost function. |
| CVE-2014-100005 | Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR-600 router (rev. Bx) with firmware before 2.17b02 allow remote attackers to hijack the authentication of administrators for requests that (1) create an administrator account or (2) enable remote management via a crafted configuration module to hedwig.cgi, (3) activate new configuration settings via a SETCFG,SAVE,ACTIVATE action to pigwidgeon.cgi, or (4) send a ping via a ping action to diagnostic.php. |
| CVE-2014-0339 | Cross-site scripting (XSS) vulnerability in view.cgi in Webmin before 1.680 allows remote attackers to inject arbitrary web script or HTML via the search parameter. |
| CVE-2014-0231 | The mod_cgid module in the Apache HTTP Server before 2.4.10 does not have a timeout mechanism, which allows remote attackers to cause a denial of service (process hang) via a request to a CGI script that does not read from its stdin file descriptor. |
| CVE-2013-7471 | An issue was discovered in soap.cgi?service=WANIPConn1 on D-Link DIR-845 before v1.02b03, DIR-600 before v2.17b01, DIR-645 before v1.04b11, DIR-300 rev. B, and DIR-865 devices. There is Command Injection via shell metacharacters in the NewInternalClient, NewExternalPort, or NewInternalPort element of a SOAP POST request. |
| CVE-2013-7418 | cgi-bin/iptablesgui.cgi in IPCop (aka IPCop Firewall) before 2.1.5 allows remote authenticated users to execute arbitrary code via shell metacharacters in the TABLE parameter. NOTE: this can be exploited remotely by leveraging a separate cross-site scripting (XSS) vulnerability. |
| CVE-2013-7417 | Cross-site scripting (XSS) vulnerability in cgi-bin/ipinfo.cgi in IPCop (aka IPCop Firewall) before 2.1.3 allows remote attackers to inject arbitrary web script or HTML via the QUERY_STRING. NOTE: this can be used to bypass the cross-site request forgery (CSRF) protection mechanism by setting the Referer. |
| CVE-2013-7329 | The CGI::Application module before 4.50_50 and 4.50_51 for Perl, when run modes are not specified, allows remote attackers to obtain sensitive information (web queries and environment details) via vectors related to the dump_html function. |
| CVE-2013-7247 | cgi-bin/tsaws.cgi in Franklin Fueling Systems TS-550 evo with firmware 2.0.0.6833 and other versions before 2.4.0 allows remote attackers to discover sensitive information (user names and password hashes) via the cmdWebGetConfiguration action in a TSA_REQUEST. |
| CVE-2013-7205 | Off-by-one error in the process_cgivars function in contrib/daemonchk.c in Nagios Core 3.5.1, 4.0.2, and earlier allows remote authenticated users to obtain sensitive information from process memory or cause a denial of service (crash) via a long string in the last key value in the variable list, which triggers a heap-based buffer over-read. |
| CVE-2013-7204 | Cross-site request forgery (CSRF) vulnerability in set_users.cgi in Conceptronic CIPCAMPTIWL Camera 1.0 with firmware 21.37.2.49 allows remote attackers to hijack the authentication of administrators for requests that add arbitrary users. |
| CVE-2013-7183 | cgi-bin/reboot.cgi on Seowon Intech SWC-9100 routers allows remote attackers to (1) cause a denial of service (reboot) via a default_reboot action or (2) reset all configuration values via a factory_default action. |
| CVE-2013-7179 | The ping functionality in cgi-bin/diagnostic.cgi on Seowon Intech SWC-9100 routers allows remote attackers to execute arbitrary commands via shell metacharacters in the ping_ipaddr parameter. |
| CVE-2013-7174 | Absolute path traversal vulnerability in cgi-bin/jc.cgi in QNAP QTS before 4.1.0 allows remote attackers to read arbitrary files via a full pathname in the f parameter. |
| CVE-2013-7108 | Multiple off-by-one errors in Nagios Core 3.5.1, 4.0.2, and earlier, and Icinga before 1.8.5, 1.9 before 1.9.4, and 1.10 before 1.10.2 allow remote authenticated users to obtain sensitive information from process memory or cause a denial of service (crash) via a long string in the last key value in the variable list to the process_cgivars function in (1) avail.c, (2) cmd.c, (3) config.c, (4) extinfo.c, (5) histogram.c, (6) notifications.c, (7) outages.c, (8) status.c, (9) statusmap.c, (10) summary.c, and (11) trends.c in cgi/, which triggers a heap-based buffer over-read. |
| CVE-2013-7107 | Cross-site request forgery (CSRF) vulnerability in cmd.cgi in Icinga 1.8.5, 1.9.4, 1.10.2, and earlier allows remote attackers to hijack the authentication of users for unspecified commands via unspecified vectors, as demonstrated by bypassing authentication requirements for CVE-2013-7106. |
| CVE-2013-7106 | Multiple stack-based buffer overflows in Icinga before 1.8.5, 1.9 before 1.9.4, and 1.10 before 1.10.2 allow remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a long string to the (1) display_nav_table, (2) page_limit_selector, (3) print_export_link, or (4) page_num_selector function in cgi/cgiutils.c; (5) status_page_num_selector function in cgi/status.c; or (6) display_command_expansion function in cgi/config.c. NOTE: this can be exploited without authentication by leveraging CVE-2013-7107. |
| CVE-2013-7092 | Multiple SQL injection vulnerabilities in /admin/cgi-bin/rpc/doReport/18 in McAfee Email Gateway 7.6 allow remote authenticated users to execute arbitrary SQL commands via the (1) events_col, (2) event_id, (3) reason, (4) events_order, (5) emailstatus_order, or (6) emailstatus_col JSON keys. |
| CVE-2013-7070 | The handle_request function in lib/HTTPServer.pm in Monitorix before 3.3.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the URI. |
| CVE-2013-7054 | D-Link DIR-100 4.03B07: cli.cgi XSS |
| CVE-2013-7053 | D-Link DIR-100 4.03B07: cli.cgi CSRF |
| CVE-2013-7052 | D-Link DIR-100 4.03B07: security bypass via an error in the cliget.cgi script |
| CVE-2013-7051 | D-Link DIR-100 4.03B07: cli.cgi security bypass due to failure to check authentication parameters |
| CVE-2013-6987 | Multiple directory traversal vulnerabilities in the FileBrowser components in Synology DiskStation Manager (DSM) before 4.3-3810 Update 3 allow remote attackers to read, write, and delete arbitrary files via a .. (dot dot) in the (1) path parameter to file_delete.cgi or (2) folder_path parameter to file_share.cgi in webapi/FileStation/; (3) dlink parameter to fbdownload/; or unspecified parameters to (4) html5_upload.cgi, (5) file_download.cgi, (6) file_sharing.cgi, (7) file_MVCP.cgi, or (8) file_rename.cgi in webapi/FileStation/. |
| CVE-2013-6955 | webman/imageSelector.cgi in Synology DiskStation Manager (DSM) 4.0 before 4.0-2259, 4.2 before 4.2-3243, and 4.3 before 4.3-3810 Update 1 allows remote attackers to append data to arbitrary files, and consequently execute arbitrary code, via a pathname in the SLICEUPLOAD X-TMP-FILE HTTP header. |
| CVE-2013-6826 | cgi-bin/module//sysmanager/admin/SYSAdminUserDialog in Fortinet FortiAnalyzer before 5.0.5 does not properly validate the csrf_token parameter, which allows remote attackers to perform cross-site request forgery (CSRF) attacks. |
| CVE-2013-6785 | Directory traversal vulnerability in url_redirect.cgi in Supermicro IPMI before SMT_X9_315 allows authenticated attackers to read arbitrary files via the url_name parameter. |
| CVE-2013-6032 | cgi-bin/postpf/cgi-bin/dynamic/config/config.html on Lexmark X94x before LC.BR.P142, X85x through LC4.BE.P487, X644 and X646 before LC2.MC.P374, X642 through LC2.MB.P318, W840 through LS.HA.P252, T64x before LS.ST.P344, X64xef through LC2.TI.P325, C935dn through LC.JO.P091, C920 through LS.TA.P152, C78x through LC.IO.P187, X78x through LC2.IO.P335, C77x through LC.CM.P052, X772 through LC2.TR.P291, C53x through LS.SW.P069, C52x through LS.FA.P150, 25xxN through LCL.CU.P114, N4000 through LC.MD.P119, N4050e through GO.GO.N206, N70xxe through LC.CO.N309, E450 through LM.SZ.P124, E350 through LE.PH.P129, and E250 through LE.PM.P126 printers allows remote attackers to remove the Password Protect administrative password via the vac.255.GENPASSWORD parameter. |
| CVE-2013-5758 | cgi-bin/cgiServer.exx in Yealink VoIP Phone SIP-T38G allows remote authenticated users to execute arbitrary commands by calling the system method in the body of a request, as demonstrated by running unauthorized services, changing directory permissions, and modifying files. |
| CVE-2013-5757 | Absolute path traversal vulnerability in Yealink VoIP Phone SIP-T38G allows remote authenticated users to read arbitrary files via a full pathname in the dumpConfigFile function in the command parameter to cgi-bin/cgiServer.exx. |
| CVE-2013-5756 | Directory traversal vulnerability in Yealink VoIP Phone SIP-T38G allows remote authenticated users to read arbitrary files via a .. (dot dot) in the page parameter to cgi-bin/cgiServer.exx. |
| CVE-2013-5223 | Multiple cross-site scripting (XSS) vulnerabilities in D-Link DSL-2760U Gateway (Rev. E1) allow remote authenticated users to inject arbitrary web script or HTML via the (1) ntpServer1 parameter to sntpcfg.cgi, username parameter to (2) ddnsmngr.cmd or (3) todmngr.tod, (4) TodUrlAdd parameter to urlfilter.cmd, (5) appName parameter to scprttrg.cmd, (6) fltName in an add action or (7) rmLst parameter in a remove action to scoutflt.cmd, (8) groupName parameter to portmapcfg.cmd, (9) snmpRoCommunity parameter to snmpconfig.cgi, (10) fltName parameter to scinflt.cmd, (11) PolicyName in an add action or (12) rmLst parameter in a remove action to prmngr.cmd, (13) ippName parameter to ippcfg.cmd, (14) smbNetBiosName or (15) smbDirName parameter to samba.cgi, or (16) wlSsid parameter to wlcfg.wl. |
| CVE-2013-4981 | Buffer overflow in cgi-bin/user/Config.cgi in AVTECH AVN801 DVR with firmware 1017-1003-1009-1003 and earlier, and possibly other devices, allows remote attackers to cause a denial of service (device crash) and possibly execute arbitrary code via a long string in the Network.SMTP.Receivers parameter. |
| CVE-2013-4864 | MiCasaVerde VeraLite with firmware 1.5.408 allows remote attackers to send HTTP requests to intranet servers via the url parameter to cgi-bin/cmh/proxy.sh, related to a Server-Side Request Forgery (SSRF) issue. |
| CVE-2013-4862 | MiCasaVerde VeraLite with firmware 1.5.408 does not properly restrict access, which allows remote authenticated users to (1) update the firmware via the squashfs parameter to upgrade_step2.sh or (2) obtain hashed passwords via the cgi-bin/cmh/backup.sh page. |
| CVE-2013-4861 | Directory traversal vulnerability in cgi-bin/cmh/get_file.sh in MiCasaVerde VeraLite with firmware 1.5.408 allows remote authenticated users to read arbirary files via a .. (dot dot) in the filename parameter. |
| CVE-2013-4731 | ajax.cgi in the web interface on the Choice Wireless Green Packet WIXFMR-111 4G WiMax modem allows remote attackers to execute arbitrary commands via shell metacharacters in the pip parameter in an Ajax tag_ipPing request, a different vulnerability than CVE-2013-3581. |
| CVE-2013-4716 | Cross-site scripting (XSS) vulnerability in Tattyan HP TOWN 5_9_3 and earlier allows remote attackers to inject arbitrary web script or HTML via the query string. |
| CVE-2013-4615 | The Canon MG3100, MG5300, MG6100, MP495, MX340, MX870, MX890, MX920, and MX922 printers allow remote attackers to cause a denial of service (device hang) via a crafted LAN_TXT24 parameter to English/pages_MacUS/cgi_lan.cgi followed by a direct request to English/pages_MacUS/lan_set_content.html. NOTE: the vendor has apparently responded by stating "Canon believes that its printers will not have to deal with unauthorized access to the network from an external location as long as the printers are used in a secured environment." |
| CVE-2013-4449 | The rwm overlay in OpenLDAP 2.4.23, 2.4.36, and earlier does not properly count references, which allows remote attackers to cause a denial of service (slapd crash) by unbinding immediately after a search request, which triggers rwm_conn_destroy to free the session context while it is being used by rwm_op_search. |
| CVE-2013-4255 | The policy definition evaluator in Condor 7.5.4, 8.0.0, and earlier does not properly handle attributes in a (1) PREEMPT, (2) SUSPEND, (3) CONTINUE, (4) WANT_VACATE, or (5) KILL policy that evaluate to an Unconfigured, Undefined, or Error state, which allows remote authenticated users to cause a denial of service (condor_startd exit) via a crafted job. |
| CVE-2013-3738 | A File Inclusion vulnerability exists in Zabbix 2.0.6 due to inadequate sanitization of request strings in CGI scripts, which could let a remote malicious user execute arbitrary code. |
| CVE-2013-3690 | Cross-site request forgery (CSRF) vulnerability in cgi-bin/users.cgi in Brickcom FB-100Ap, WCB-100Ap, MD-100Ap, WFB-100Ap, OB-100Ae, OSD-040E, and possibly other camera models with firmware 3.1.0.8 and earlier, allows remote attackers to hijack the authentication of administrators for requests that add users. |
| CVE-2013-3688 | The TP-Link IP Cameras TL-SC3171, TL-SC3130, TL-SC3130G, TL-SC3171G, and possibly other models before beta firmware LM.1.6.18P12_sign6, does not properly restrict access to certain administrative functions, which allows remote attackers to (1) cause a denial of service (device reboot) via a request to cgi-bin/reboot or (2) cause a denial of service (reboot and reset to factory defaults) via a request to cgi-bin/hardfactorydefault. |
| CVE-2013-3686 | cgi-bin/operator/param in AirLive WL2600CAM and possibly other camera models allows remote attackers to obtain the administrator password via a list action. |
| CVE-2013-3623 | Multiple stack-based buffer overflows in cgi/close_window.cgi in the web interface in the Intelligent Platform Management Interface (IPMI) with firmware before 3.15 (SMT_X9_315) on Supermicro X9 generation motherboards allow remote attackers to execute arbitrary code via the (1) sess_sid or (2) ACT parameter. |
| CVE-2013-3622 | Buffer overflow in logout.cgi in the Intelligent Platform Management Interface (IPMI) with firmware before 3.15 (SMT_X9_315) on Supermicro X9 generation motherboards allows remote authenticated users to execute arbitrary code via the SID parameter. |
| CVE-2013-3608 | The web interface in the Intelligent Platform Management Interface (IPMI) implementation on Supermicro H8DC*, H8DG*, H8SCM-F, H8SGL-F, H8SM*, X7SP*, X8DT*, X8SI*, X9DAX-*, X9DB*, X9DR*, X9QR*, X9SBAA-F, X9SC*, X9SPU-F, and X9SR* devices allows remote authenticated users to execute arbitrary commands via shell metacharacters, as demonstrated by the IP address field in config_date_time.cgi. |
| CVE-2013-3607 | Multiple stack-based buffer overflows in the web interface in the Intelligent Platform Management Interface (IPMI) implementation on Supermicro H8DC*, H8DG*, H8SCM-F, H8SGL-F, H8SM*, X7SP*, X8DT*, X8SI*, X9DAX-*, X9DB*, X9DR*, X9QR*, X9SBAA-F, X9SC*, X9SPU-F, and X9SR* devices allow remote attackers to execute arbitrary code on the Baseboard Management Controller (BMC), as demonstrated by the (1) username or (2) password field in login.cgi. |
| CVE-2013-3581 | ajax.cgi in the web interface on the Choice Wireless Green Packet WIXFMR-111 4G WiMax modem allows remote attackers to obtain sensitive information via an Ajax (1) wmxState or (2) netState request. |
| CVE-2013-3541 | Directory traversal vulnerability in cgi-bin/admin/fileread in AirLive WL2600CAM and possibly other camera models allows remote attackers to read arbitrary files via a .. (dot dot) in the READ.filePath parameter. |
| CVE-2013-3540 | Cross-site request forgery (CSRF) vulnerability in cgi-bin/admin/usrgrp.cgi in AirLive POE2600HD, POE250HD, POE200HD, OD-325HD, OD-2025HD, OD-2060HD, POE100HD, and possibly other camera models allows remote attackers to hijack the authentication of administrators for requests that add users. |
| CVE-2013-3539 | Cross-site request forgery (CSRF) vulnerability in the command/user.cgi in Sony SNC CH140, SNC CH180, SNC CH240, SNC CH280, SNC DH140, SNC DH140T, SNC DH180, SNC DH240, SNC DH240T, SNC DH280, and possibly other camera models allows remote attackers to hijack the authentication of administrators for requests that add users. |
| CVE-2013-3506 | cgi-bin/performance/perfchart.cgi in the Performance component in GroundWork Monitor Enterprise 6.7.0 does not properly restrict XML content, which allows remote attackers to execute arbitrary commands by creating a .shtml file and leveraging Server Side Includes (SSI) functionality. |
| CVE-2013-3504 | Directory traversal vulnerability in monarch.cgi in the MONARCH component in GroundWork Monitor Enterprise 6.7.0 allows remote authenticated users to overwrite arbitrary files by leveraging access to the nagios account. |
| CVE-2013-3503 | The Profile Importer feature in monarch.cgi in the MONARCH component in GroundWork Monitor Enterprise 6.7.0 allows remote authenticated users to read arbitrary files via an XML document containing an external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue. |
| CVE-2013-3502 | monarch_scan.cgi in the MONARCH component in GroundWork Monitor Enterprise 6.7.0 allows remote authenticated users to execute arbitrary commands, and consequently obtain sensitive information, by leveraging a JOSSO SSO cookie. |
| CVE-2013-3314 | The Loftek Nexus 543 IP Camera allows remote attackers to obtain (1) IP addresses via a request to get_realip.cgi or (2) firmware versions (ui and system), timestamp, serial number, p2p port number, and wifi status via a request to get_status.cgi. |
| CVE-2013-3313 | The Loftek Nexus 543 IP Camera stores passwords in cleartext, which allows remote attackers to obtain sensitive information via an HTTP GET request to check_users.cgi. NOTE: cleartext passwords can also be obtained from proc/kcore when leveraging the directory traversal vulnerability in CVE-2013-3311. |
| CVE-2013-3312 | Multiple cross-site request forgery (CSRF) vulnerabilities in the Loftek Nexus 543 IP Camera allow remote attackers to hijack the authentication of unspecified victims for requests that change (1) passwords or (2) firewall configuration, as demonstrated by a request to set_users.cgi. |
| CVE-2013-3098 | Multiple cross-site request forgery (CSRF) vulnerabilities in TRENDnet TEW-812DRU router with firmware before 1.0.9.0 allow remote attackers to hijack the authentication of administrators for requests that (1) change admin credentials in a request to setSysAdm.cgi, (2) enable remote management or (3) enable port forwarding in an Apply action to uapply.cgi, or (4) have unspecified impact via a request to setNTP.cgi. NOTE: some of these details are obtained from third party information. |
| CVE-2013-3095 | Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR865L router (Rev. A1) with firmware before 1.05b07 allow remote attackers to hijack the authentication of administrators for requests that (1) change the administrator password or (2) enable remote management via a request to hedwig.cgi or (3) activate configuration changes via a request to pigwidgeon.cgi. |
| CVE-2013-3089 | Cross-site request forgery (CSRF) vulnerability in apply.cgi in Belkin N300 (F7D7301v1) router allows remote attackers to hijack the authentication of administrators for requests that modify configuration. |
| CVE-2013-3083 | Cross-site request forgery (CSRF) vulnerability in cgi-bin/system_setting.exe in Belkin F5D8236-4 v2 allows remote attackers to hijack the authentication of administrators for requests that open the remote management interface on arbitrary ports via the remote_mgmt_enabled and remote_mgmt_port parameters. |
| CVE-2013-3072 | An Authentication Bypass vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34 in http://<router_ip>/apply.cgi?/hdd_usr_setup.htm that when visited by any user, authenticated or not, causes the router to no longer require a password to access the web administration portal. |
| CVE-2013-3068 | Cross-site request forgery (CSRF) vulnerability in apply.cgi in Linksys WRT310Nv2 2.0.0.1 allows remote attackers to hijack the authentication of administrators for requests that change passwords and modify remote management ports. |
| CVE-2013-2679 | Multiple cross-site scripting (XSS) vulnerabilities in Cisco Linksys E4200 router with firmware 1.0.05 build 7 allow remote attackers to inject arbitrary web script or HTML via the (1) log_type, (2) ping_ip, (3) ping_size, (4) submit_type, or (5) traceroute_ip parameter to apply.cgi or (6) new_workgroup or (7) submit_button parameter to storage/apply.cgi. |
| CVE-2013-2678 | Cisco Linksys E4200 1.0.05 Build 7 routers contain a Local File Include Vulnerability which could allow remote attackers to obtain sensitive information or execute arbitrary code by sending a crafted URL request to the apply.cgi script using the submit_type parameter. |
| CVE-2013-2641 | Directory traversal vulnerability in patience.cgi in Sophos Web Appliance before 3.7.8.2 allows remote attackers to read arbitrary files via the id parameter. |
| CVE-2013-2581 | cgi-bin/firmwareupgrade in TP-Link IP Cameras TL-SC3130, TL-SC3130G, TL-SC3171, TL-SC3171G, and possibly other models before beta firmware LM.1.6.18P12_sign6 allows remote attackers to modify the firmware revision via a "preset" action. |
| CVE-2013-2580 | Unrestricted file upload vulnerability in cgi-bin/uploadfile in TP-Link IP Cameras TL-SC3130, TL-SC3130G, TL-SC3171, TL-SC3171G, and possibly other models before beta firmware LM.1.6.18P12_sign6, allows remote attackers to upload arbitrary files, then accessing it via a direct request to the file in the mnt/mtd directory. |
| CVE-2013-2578 | cgi-bin/admin/servetest in TP-Link IP Cameras TL-SC3130, TL-SC3130G, TL-SC3171, TL-SC3171G, and possibly other models before beta firmware LM.1.6.18P12_sign6 allows remote attackers to execute arbitrary commands via shell metacharacters in (1) the ServerName parameter and (2) other unspecified parameters. |
| CVE-2013-2573 | A Command Injection vulnerability exists in the ap parameter to the /cgi-bin/mft/wireless_mft.cgi file in TP-Link IP Cameras TL-SC 3130, TL-SC 3130G, 3171G. and 4171G 1.6.18P12s, which could let a malicious user execute arbitrary code. |
| CVE-2013-2572 | A Security Bypass vulnerability exists in TP-LINK IP Cameras TL-SC 3130, TL-SC 3130G, 3171G, 4171G, and 3130 1.6.18P12 due to default hard-coded credentials for the administrative Web interface, which could let a malicious user obtain unauthorized access to CGI files. |
| CVE-2013-2570 | A Command Injection vulnerability exists in Zavio IP Cameras through 1.6.3 in the General.Time.NTP.Server parameter to the sub_C8C8 function of the binary /opt/cgi/view/param, which could let a remove malicious user execute arbitrary code. |
| CVE-2013-2568 | A Command Injection vulnerability exists in Zavio IP Cameras through 1.6.3 via the ap parameter to /cgi-bin/mft/wireless_mft.cgi, which could let a remote malicious user execute arbitrary code. |
| CVE-2013-2271 | The D-Link DSL-2740B Gateway with firmware EU_1.0, when an active administrator session exists, allows remote attackers to bypass authentication and gain administrator access via a request to login.cgi. |
| CVE-2013-2214 | status.cgi in Nagios 4.0 before 4.0 beta4 and 3.x before 3.5.1 does not properly restrict access to certain users that are a contact for a service, which allows remote authenticated users to obtain sensitive information about hostnames via the servicegroup (1) overview, (2) summary, or (3) grid style in status.cgi. NOTE: this behavior is by design in most 3.x versions, but the upstream vendor "decided to change it for Nagios 4" and 3.5.1. |
| CVE-2013-1889 | mod_ruid2 before 0.9.8 improperly handles file descriptors which allows remote attackers to bypass security using a CGI script to break out of the chroot. |
| CVE-2013-1743 | Multiple cross-site scripting (XSS) vulnerabilities in report.cgi in Bugzilla 4.1.x and 4.2.x before 4.2.7 and 4.3.x and 4.4.x before 4.4.1 allow remote attackers to inject arbitrary web script or HTML via a field value that is not properly handled during construction of a tabular report, as demonstrated by the (1) summary or (2) real name field. NOTE: this issue exists because of an incomplete fix for CVE-2012-4189. |
| CVE-2013-1742 | Multiple cross-site scripting (XSS) vulnerabilities in editflagtypes.cgi in Bugzilla 2.x, 3.x, and 4.0.x before 4.0.11; 4.1.x and 4.2.x before 4.2.7; and 4.3.x and 4.4.x before 4.4.1 allow remote attackers to inject arbitrary web script or HTML via the (1) id or (2) sortkey parameter. |
| CVE-2013-1734 | Cross-site request forgery (CSRF) vulnerability in attachment.cgi in Bugzilla 2.x, 3.x, and 4.0.x before 4.0.11; 4.1.x and 4.2.x before 4.2.7; and 4.3.x and 4.4.x before 4.4.1 allows remote attackers to hijack the authentication of arbitrary users for requests that commit an attachment change via an update action. |
| CVE-2013-1733 | Cross-site request forgery (CSRF) vulnerability in process_bug.cgi in Bugzilla 4.4.x before 4.4.1 allows remote attackers to hijack the authentication of arbitrary users for requests that modify bugs via vectors involving a midair-collision token. |
| CVE-2013-1601 | An Information Disclosure vulnerability exists due to a failure to restrict access on the lums.cgi script when processing a live video stream in D-LINK An Information Disclosure vulnerability exists due to a failure to restrict access on the lums.cgi script when processing a live video stream in D-LINK WCS-1100 1.02, TESCO DCS-2121 1.05_TESCO, TESCO DCS-2102 1.05_TESCO, DCS-7510 1.00, DCS-7410 1.00, DCS-6410 1.00, DCS-5635 1.01, DCS-5605 1.01, DCS-5230L 1.02, DCS-5230 1.02, DCS-3430 1.02, DCS-3411 1.02, DCS-3410 1.02, DCS-2121 1.06_FR, DCS-2121 1.06, DCS-2121 1.05_RU, DCS-2102 1.06_FR, DCS-2102 1.06, DCS-2102 1.05_RU, DCS-1130L 1.04, DCS-1130 1.04_US, DCS-1130 1.03, DCS-1100L 1.04, DCS-1100 1.04_US, and DCS-1100 1.03, which could let a malicious user obtain sensitive information. which could let a malicious user obtain sensitive information. |
| CVE-2013-1599 | A Command Injection vulnerability exists in the /var/www/cgi-bin/rtpd.cgi script in D-Link IP Cameras DCS-3411/3430 firmware 1.02, DCS-5605/5635 1.01, DCS-1100L/1130L 1.04, DCS-1100/1130 1.03, DCS-1100/1130 1.04_US, DCS-2102/2121 1.05_RU, DCS-3410 1.02, DCS-5230 1.02, DCS-5230L 1.02, DCS-6410 1.00, DCS-7410 1.00, DCS-7510 1.00, and WCS-1100 1.02, which could let a remote malicious user execute arbitrary commands through the camera’s web interface. |
| CVE-2013-0785 | Cross-site scripting (XSS) vulnerability in show_bug.cgi in Bugzilla before 3.6.13, 3.7.x and 4.0.x before 4.0.10, 4.1.x and 4.2.x before 4.2.5, and 4.3.x and 4.4.x before 4.4rc2 allows remote attackers to inject arbitrary web script or HTML via the id parameter in conjunction with an invalid value of the format parameter. |
| CVE-2013-0238 | The try_parse_v4_netmask function in hostmask.c in IRCD-Hybrid before 8.0.6 does not properly validate masks, which allows remote attackers to cause a denial of service (crash) via a mask that causes a negative number to be parsed. |
| CVE-2013-0209 | lib/MT/Upgrade.pm in mt-upgrade.cgi in Movable Type 4.2x and 4.3x through 4.38 does not require authentication for requests to database-migration functions, which allows remote attackers to conduct eval injection and SQL injection attacks via crafted parameters, as demonstrated by an eval injection attack against the core_drop_meta_for_table function, leading to execution of arbitrary Perl code. |
| CVE-2013-0189 | cachemgr.cgi in Squid 3.1.x and 3.2.x, possibly 3.1.22, 3.2.4, and other versions, allows remote attackers to cause a denial of service (resource consumption) via a crafted request. NOTE: this issue is due to an incorrect fix for CVE-2012-5643, possibly involving an incorrect order of arguments or incorrect comparison. |
| CVE-2013-0144 | Cross-site request forgery (CSRF) vulnerability in cgi-bin/create_user.cgi on QNAP VioStor NVR devices with firmware 4.0.3 allows remote attackers to hijack the authentication of administrators for requests that create administrative accounts via a NEW USER action. |
| CVE-2013-0143 | cgi-bin/pingping.cgi on QNAP VioStor NVR devices with firmware 4.0.3, and in the Surveillance Station Pro component in QNAP NAS, allows remote authenticated users to execute arbitrary commands by leveraging guest access and placing shell metacharacters in the query string. |
| CVE-2013-0132 | The suexec implementation in Parallels Plesk Panel 11.0.9 contains a cgi-wrapper whitelist entry, which allows user-assisted remote attackers to execute arbitrary PHP code via a request containing crafted environment variables. |
| CVE-2013-0126 | Multiple cross-site request forgery (CSRF) vulnerabilities in index.cgi on the Verizon FIOS Actiontec MI424WR-GEN3I router with firmware 40.19.36 allow remote attackers to hijack the authentication of administrators for requests that (1) add administrative accounts via the username and user_level parameters or (2) enable remote administration via the is_telnet_primary and is_telnet_secondary parameters. |
| CVE-2013-0124 | Multiple cross-site scripting (XSS) vulnerabilities in the administration interface in ASKIA askiaweb allow remote attackers to inject arbitrary web script or HTML via the (1) Number or (2) UpdatePage parameter to WebProd/cgi-bin/AskiaExt.dll. |
| CVE-2012-6687 | FastCGI (aka fcgi and libfcgi) 2.4.0 allows remote attackers to cause a denial of service (segmentation fault and crash) via a large number of connections. |
| CVE-2012-6609 | Directory traversal vulnerability in a_getlog.cgi in Polycom HDX Video End Points before 3.0.4 and UC APL before 2.7.1.J allows remote attackers to read arbitrary files via a .. (dot dot) in the name parameter. |
| CVE-2012-6131 | Cross-site scripting (XSS) vulnerability in cgi/client.py in Roundup before 1.4.20 allows remote attackers to inject arbitrary web script or HTML via the @action parameter to support/issue1. |
| CVE-2012-6096 | Multiple stack-based buffer overflows in the get_history function in history.cgi in Nagios Core before 3.4.4, and Icinga 1.6.x before 1.6.2, 1.7.x before 1.7.4, and 1.8.x before 1.8.4, might allow remote attackers to execute arbitrary code via a long (1) host_name variable (host parameter) or (2) svc_description variable. |
| CVE-2012-5969 | Multiple directory traversal vulnerabilities on the Huawei E585 device allow remote attackers to (1) read arbitrary files via a .. (dot dot) in the PATH_INFO of an sdcard/ request or (2) modify arbitrary files via a .. (dot dot) in the req_page parameter to en/sms.cgi. |
| CVE-2012-5643 | Multiple memory leaks in tools/cachemgr.cc in cachemgr.cgi in Squid 2.x and 3.x before 3.1.22, 3.2.x before 3.2.4, and 3.3.x before 3.3.0.2 allow remote attackers to cause a denial of service (memory consumption) via (1) invalid Content-Length headers, (2) long POST requests, or (3) crafted authentication credentials. |
| CVE-2012-5320 | Cross-site request forgery (CSRF) vulnerability in password.cgi in Sagem F@ST 2604 253180972B allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the sysPassword parameter. |
| CVE-2012-5319 | Cross-site request forgery (CSRF) vulnerability in setup/security.cgi in D-Link DCS-900, DCS-2000, and DCS-5300 allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the rootpass parameter. |
| CVE-2012-4923 | Multiple cross-site scripting (XSS) vulnerabilities in Endian Firewall 2.4 allow remote attackers to inject arbitrary web script or HTML via the (1) createrule parameter to dnat.cgi, (2) addrule parameter to dansguardian.cgi, or (3) PATH_INFO to openvpn_users.cgi. |
| CVE-2012-4893 | Multiple cross-site request forgery (CSRF) vulnerabilities in file/show.cgi in Webmin 1.590 and earlier allow remote attackers to hijack the authentication of privileged users for requests that (1) read files or execute (2) tar, (3) zip, or (4) gzip commands, a different issue than CVE-2012-2982. |
| CVE-2012-4746 | Cross-site request forgery (CSRF) vulnerability in accessaccount.cgi in ZTE ZXDSL 831IIV7.5.0a_Z29_OV allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the sysPassword parameter. |
| CVE-2012-4678 | munin-cgi-graph for Munin 2.0 rc4 does not delete temporary files, which allows remote attackers to cause a denial of service (disk consumption) via many requests to an image with unique parameters. |
| CVE-2012-4667 | Multiple cross-site scripting (XSS) vulnerabilities in SquidClamav 5.x before 5.8 allow remote attackers to inject arbitrary web script or HTML via the (1) url, (2) virus, (3) source, or (4) user parameter to (a) clwarn.cgi, (b) clwarn.cgi.de_DE, (c) clwarn.cgi.en_EN, (d) clwarn.cgi.fr_FR, (e) clwarn.cgi.pt_BR, or (f) clwarn.cgi.ru_RU in cgi-bin/. |
| CVE-2012-4443 | Monkey HTTP Daemon 0.9.3 uses a real UID of root and a real GID of root during execution of CGI scripts, which might allow local users to gain privileges by leveraging cgi-bin write access. |
| CVE-2012-4430 | The dump_resource function in dird/dird_conf.c in Bacula before 5.2.11 does not properly enforce ACL rules, which allows remote authenticated users to obtain resource dump information via unspecified vectors. |
| CVE-2012-4197 | Bugzilla/Attachment.pm in attachment.cgi in Bugzilla 2.x and 3.x before 3.6.12, 3.7.x and 4.0.x before 4.0.9, 4.1.x and 4.2.x before 4.2.4, and 4.3.x and 4.4.x before 4.4rc1 allows remote attackers to read attachment descriptions from private bugs via an obsolete=1 insert action. |
| CVE-2012-4189 | Cross-site scripting (XSS) vulnerability in Bugzilla 4.1.x and 4.2.x before 4.2.4, and 4.3.x and 4.4.x before 4.4rc1, allows remote attackers to inject arbitrary web script or HTML via a field value that is not properly handled during construction of a tabular report, as demonstrated by the Version field. |
| CVE-2012-4019 | Cross-site scripting (XSS) vulnerability in tokyo_bbs.cgi in Come on Girls Interface (CGI) Tokyo BBS allows remote attackers to inject arbitrary web script or HTML via vectors related to the error page. |
| CVE-2012-3513 | munin-cgi-graph in Munin before 2.0.6, when running as a CGI module under Apache, allows remote attackers to load new configurations and create files in arbitrary directories via the logdir command. |
| CVE-2012-3479 | lisp/files.el in Emacs 23.2, 23.3, 23.4, and 24.1 automatically executes eval forms in local-variable sections when the enable-local-variables option is set to :safe, which allows user-assisted remote attackers to execute arbitrary Emacs Lisp code via a crafted file. |
| CVE-2012-2983 | file/edit_html.cgi in Webmin 1.590 and earlier does not perform an authorization check before showing a file's unedited contents, which allows remote attackers to read arbitrary files via the file field. |
| CVE-2012-2982 | file/show.cgi in Webmin 1.590 and earlier allows remote authenticated users to execute arbitrary commands via an invalid character in a pathname, as demonstrated by a | (pipe) character. |
| CVE-2012-2981 | Webmin 1.590 and earlier allows remote authenticated users to execute arbitrary Perl code via a crafted file associated with the type (aka monitor type name) parameter. |
| CVE-2012-2638 | Cross-site scripting (XSS) vulnerability in SmallPICT.cgi in SmallPICT before 2.7 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2012-2626 | cgi-bin/admin.cgi in the web console in Plixer Scrutinizer (aka Dell SonicWALL Scrutinizer) before 9.5.0 does not require token authentication, which allows remote attackers to add administrative accounts via a userprefs action. |
| CVE-2012-2336 | sapi/cgi/cgi_main.c in PHP before 5.3.13 and 5.4.x before 5.4.3, when configured as a CGI script (aka php-cgi), does not properly handle query strings that lack an = (equals sign) character, which allows remote attackers to cause a denial of service (resource consumption) by placing command-line options in the query string, related to lack of skipping a certain php_getopt for the 'T' case. NOTE: this vulnerability exists because of an incomplete fix for CVE-2012-1823. |
| CVE-2012-2335 | php-wrapper.fcgi does not properly handle command-line arguments, which allows remote attackers to bypass a protection mechanism in PHP 5.3.12 and 5.4.2 and execute arbitrary code by leveraging improper interaction between the PHP sapi/cgi/cgi_main.c component and a query string beginning with a +- sequence. |
| CVE-2012-2329 | Buffer overflow in the apache_request_headers function in sapi/cgi/cgi_main.c in PHP 5.4.x before 5.4.3 allows remote attackers to cause a denial of service (application crash) via a long string in the header of an HTTP request. |
| CVE-2012-2311 | sapi/cgi/cgi_main.c in PHP before 5.3.13 and 5.4.x before 5.4.3, when configured as a CGI script (aka php-cgi), does not properly handle query strings that contain a %3D sequence but no = (equals sign) character, which allows remote attackers to execute arbitrary code by placing command-line options in the query string, related to lack of skipping a certain php_getopt for the 'd' case. NOTE: this vulnerability exists because of an incomplete fix for CVE-2012-1823. |
| CVE-2012-2147 | munin-cgi-graph in Munin 2.0 rc4 allows remote attackers to cause a denial of service (disk or memory consumption) via many image requests with large values in the (1) size_x or (2) size_y parameters. |
| CVE-2012-2104 | cgi-bin/munin-cgi-graph in Munin 2.x writes data to a log file without sanitizing non-printable characters, which might allow user-assisted remote attackers to inject terminal emulator escape sequences and execute arbitrary commands or delete arbitrary files via a crafted HTTP request. |
| CVE-2012-1823 | sapi/cgi/cgi_main.c in PHP before 5.3.12 and 5.4.x before 5.4.2, when configured as a CGI script (aka php-cgi), does not properly handle query strings that lack an = (equals sign) character, which allows remote attackers to execute arbitrary code by placing command-line options in the query string, related to lack of skipping a certain php_getopt for the 'd' case. |
| CVE-2012-1795 | webglimpse.cgi in Webglimpse before 2.20.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the query parameter, as exploited in the wild in March 2012. |
| CVE-2012-1788 | Multiple cross-site scripting (XSS) vulnerabilities in wonderdesk.cgi in WonderDesk SQL 4.14 allow remote attackers to inject arbitrary web script or HTML via the (1) cus_email parameter in a cust_lostpw action; or (2) help_name, (3) help_email, (4) help_website, or (5) help_example_url parameters in an hd_modify_record action. |
| CVE-2012-1787 | Multiple cross-site scripting (XSS) vulnerabilities in wgarcmin.cgi in Webglimpse 2.20.0 and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) URL, (2) FILE, or (3) DOMAIN parameters. |
| CVE-2012-1417 | Multiple cross-site scripting (XSS) vulnerabilities in Local Phone book and Blacklist form in Yealink VOIP Phones allow remote authenticated users to inject arbitrary web script or HTML via the user field to cgi-bin/ConfigManApp.com. |
| CVE-2012-1308 | Cross-site request forgery (CSRF) vulnerability in redpass.cgi in D-Link DSL-2640B Firmware EU_4.00 allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the sysPassword parameter. |
| CVE-2012-1262 | Cross-site scripting (XSS) vulnerability in cgi-bin/mt/mt-wizard.cgi in Movable Type before 4.38, 5.0x before 5.07, and 5.1x before 5.13, when the product is incompletely installed, allows remote attackers to inject arbitrary web script or HTML via the dbuser parameter, a different vulnerability than CVE-2012-0318. |
| CVE-2012-1261 | Cross-site scripting (XSS) vulnerability in cgi-bin/scrut_fa_exclusions.cgi in Plixer International Scrutinizer NetFlow and sFlow Analyzer 8.6.2.16204 and other versions before 9.0.1.19899 allows remote attackers to inject arbitrary web script or HTML via the standalone parameter. |
| CVE-2012-1260 | Cross-site scripting (XSS) vulnerability in cgi-bin/userprefs.cgi in Plixer International Scrutinizer NetFlow & sFlow Analyzer 8.6.2.16204, and possibly other versions before 9.0.1.19899, allows remote attackers to inject arbitrary web script or HTML via the newUser parameter. NOTE: this might not be a vulnerability, since an administrator might already have the privileges to create arbitrary script. |
| CVE-2012-1259 | Multiple SQL injection vulnerabilities in Plixer International Scrutinizer NetFlow & sFlow Analyzer 8.6.2.16204, and possibly other versions before 9.0.1.19899, allow remote attackers to execute arbitrary SQL commands via the (1) addip parameter to cgi-bin/scrut_fa_exclusions.cgi, (2) getPermissionsAndPreferences parameter to cgi-bin/login.cgi, or (3) possibly certain parameters to d4d/alarms.php as demonstrated by the search_str parameter. |
| CVE-2012-1258 | cgi-bin/userprefs.cgi in Plixer International Scrutinizer NetFlow & sFlow Analyzer before 9.0.1.19899 does not validate user permissions, which allow remote attackers to add user accounts with administrator privileges via the newuser, pwd, and selectedUserGroup parameters. |
| CVE-2012-1164 | slapd in OpenLDAP before 2.4.30 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via an LDAP search query with attrsOnly set to true, which causes empty attributes to be returned. |
| CVE-2012-0902 | AirTies Air 4450 1.1.2.18 allows remote attackers to cause a denial of service (reboot) via a direct request to cgi-bin/loader. |
| CVE-2012-0831 | PHP before 5.3.10 does not properly perform a temporary change to the magic_quotes_gpc directive during the importing of environment variables, which makes it easier for remote attackers to conduct SQL injection attacks via a crafted request, related to main/php_variables.c, sapi/cgi/cgi_main.c, and sapi/fpm/fpm/fpm_main.c. |
| CVE-2012-0790 | Cross-site scripting (XSS) vulnerability in smokeping_cgi in Smokeping 2.4.2, 2.6.6, and other versions before 2.6.7 allows remote attackers to inject arbitrary web script or HTML via the displaymode parameter. |
| CVE-2012-0453 | Cross-site request forgery (CSRF) vulnerability in xmlrpc.cgi in Bugzilla 4.0.2 through 4.0.4 and 4.1.1 through 4.2rc2, when mod_perl is used, allows remote attackers to hijack the authentication of arbitrary users for requests that modify the product's installation via the XML-RPC API. |
| CVE-2012-0448 | Bugzilla 2.x and 3.x before 3.4.14, 3.5.x and 3.6.x before 3.6.8, 3.7.x and 4.0.x before 4.0.4, and 4.1.x and 4.2.x before 4.2rc2 does not reject non-ASCII characters in e-mail addresses of new user accounts, which makes it easier for remote authenticated users to spoof other user accounts by choosing a similar e-mail address. |
| CVE-2012-0440 | Cross-site request forgery (CSRF) vulnerability in jsonrpc.cgi in Bugzilla 3.5.x and 3.6.x before 3.6.8, 3.7.x and 4.0.x before 4.0.4, and 4.1.x and 4.2.x before 4.2rc2 allows remote attackers to hijack the authentication of arbitrary users for requests that use the JSON-RPC API. |
| CVE-2011-5306 | Cross-site request forgery (CSRF) vulnerability in cgi-bin/admin/setup_edit.cgi in CosmoShop ePRO 10.05.00 allows remote attackers to hijack the authentication of administrators for requests that modify settings via a setup action. |
| CVE-2011-5305 | Multiple cross-site scripting (XSS) vulnerabilities in CosmoShop ePRO 10.05.00 allow remote attackers to inject arbitrary web script or HTML via (1) the rcopy parameter to cgi-bin/admin/rubrikadmin.cgi, (2) the typ parameter to cgi-bin/admin/artikeladmin.cgi, or (3) the suchbegriff parameter to cgi-bin/admin/shophilfe_suche.cgi. |
| CVE-2011-5284 | Cross-site request forgery (CSRF) vulnerability in the web management interface in httpd/cgi-bin/shutdown.cgi in Smoothwall Express 3.1 and 3.0 SP3 and earlier allows remote attackers to hijack the authentication of administrators for requests that perform a reboot via a request to cgi-bin/shutdown.cgi. |
| CVE-2011-5283 | Cross-site scripting (XSS) vulnerability in the web management interface in httpd/cgi-bin/ipinfo.cgi in Smoothwall Express 3.1 and 3.0 SP3 and earlier allows remote attackers to inject arbitrary web script or HTML via the IP parameter in a Run action. |
| CVE-2011-5279 | CRLF injection vulnerability in the CGI implementation in Microsoft Internet Information Services (IIS) 4.x and 5.x on Windows NT and Windows 2000 allows remote attackers to modify arbitrary uppercase environment variables via a \n (newline) character in an HTTP header. |
| CVE-2011-5261 | Cross-site scripting (XSS) vulnerability in serverreport.cgi in Axis M10 Series Network Cameras M1054 firmware 5.21 and earlier allows remote attackers to inject arbitrary web script or HTML via the pageTitle parameter to admin/showReport.shtml. |
| CVE-2011-5081 | Cross-site scripting (XSS) vulnerability in RestoreFile.pm in BackupPC 3.1.0, 3.2.1, and possibly other earlier versions allows remote attackers to inject arbitrary web script or HTML via the share parameter in a RestoreFile action to index.cgi. |
| CVE-2011-5010 | apps/a3/cfg_ethping.cgi in the Ctek SkyRouter 4200 and 4300 allows remote attackers to execute arbitrary commands via shell metacharacters in the PINGADDRESS parameter for a "u" action. |
| CVE-2011-4930 | Multiple format string vulnerabilities in Condor 7.2.0 through 7.6.4, and possibly certain 7.7.x versions, as used in Red Hat MRG Grid and possibly other products, allow local users to cause a denial of service (condor_schedd daemon and failure to launch jobs) and possibly execute arbitrary code via format string specifiers in (1) the reason for a hold for a job that uses an XML user log, (2) the filename of a file to be transferred, and possibly other unspecified vectors. |
| CVE-2011-4923 | Cross-site scripting (XSS) vulnerability in View.pm in BackupPC 3.0.0, 3.1.0, 3.2.0, 3.2.1, and possibly earlier allows remote attackers to inject arbitrary web script or HTML via the num parameter in a view action to index.cgi, related to the log file viewer, a different vulnerability than CVE-2011-3361. |
| CVE-2011-4715 | Directory traversal vulnerability in cgi-bin/koha/mainpage.pl in Koha 3.4 before 3.4.7 and 3.6 before 3.6.1, and LibLime Koha 4.2 and earlier allows remote attackers to read arbitrary files via a .. (dot dot) in the KohaOpacLanguage cookie to cgi-bin/opac/opac-main.pl, related to Output.pm. |
| CVE-2011-4711 | Multiple directory traversal vulnerabilities in namazu.cgi in Namazu before 2.0.16 allow remote attackers to read arbitrary files via a .. (dot dot) in the (1) lang or (2) result parameter. |
| CVE-2011-4668 | IBM Tivoli Netcool/Reporter 2.2 before 2.2.0.8 allows remote attackers to execute arbitrary code via vectors related to an unspecified CGI program used with the Apache HTTP Server. |
| CVE-2011-4357 | Format string vulnerability in the p_cgi_error function in python/neo_cgi.c in the Python CGI Kit (neo_cgi) module for Clearsilver 0.10.5 and earlier allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via format string specifiers that are not properly handled when creating CGI error messages using the cgi_error API function. |
| CVE-2011-4355 | GNU Project Debugger (GDB) before 7.5, when .debug_gdb_scripts is defined, automatically loads certain files from the current working directory, which allows local users to gain privileges via crafted files such as Python scripts. |
| CVE-2011-4201 | remote_support.cgi in the Tadasoft Restorepoint 3.2 evaluation image allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) pid1 or (2) pid2 parameter in a stop_remote_support action. |
| CVE-2011-4172 | Multiple cross-site scripting (XSS) vulnerabilities in KENT-WEB WEB FORUM before 5.1 allow remote attackers to inject arbitrary web script or HTML via (1) an e-mail address field or (2) a cookie, a related issue to CVE-2011-3383, CVE-2011-3983, and CVE-2011-3984. |
| CVE-2011-4079 | Off-by-one error in the UTF8StringNormalize function in OpenLDAP 2.4.26 and earlier allows remote attackers to cause a denial of service (slapd crash) via a zero-length string that triggers a heap-based buffer overflow, as demonstrated using an empty postalAddressAttribute value in an LDIF entry. |
| CVE-2011-3984 | Cross-site scripting (XSS) vulnerability in KENT-WEB WEB FORUM 5.1 and earlier allows remote attackers to inject arbitrary web script or HTML via vectors related to "web form entries." |
| CVE-2011-3983 | Cross-site scripting (XSS) vulnerability in KENT-WEB WEB FORUM 5.1 and earlier allows remote attackers to inject arbitrary web script or HTML via vectors related to cookies. |
| CVE-2011-3669 | Cross-site request forgery (CSRF) vulnerability in attachment.cgi in Bugzilla 2.x, 3.x, and 4.x before 4.2rc1 allows remote attackers to hijack the authentication of arbitrary users for requests that upload attachments. |
| CVE-2011-3668 | Cross-site request forgery (CSRF) vulnerability in post_bug.cgi in Bugzilla 2.x, 3.x, and 4.x before 4.2rc1 allows remote attackers to hijack the authentication of arbitrary users for requests that create bug reports. |
| CVE-2011-3667 | The User.offer_account_by_email WebService method in Bugzilla 2.x and 3.x before 3.4.13, 3.5.x and 3.6.x before 3.6.7, 3.7.x and 4.0.x before 4.0.3, and 4.1.x through 4.1.3, when createemailregexp is not empty, does not properly handle user_can_create_account settings, which allows remote attackers to create user accounts by leveraging a token contained in an e-mail message. |
| CVE-2011-3657 | Multiple cross-site scripting (XSS) vulnerabilities in Bugzilla 2.x and 3.x before 3.4.13, 3.5.x and 3.6.x before 3.6.7, 3.7.x and 4.0.x before 4.0.3, and 4.1.x through 4.1.3, when debug mode is used, allow remote attackers to inject arbitrary web script or HTML via vectors involving a (1) tabular report, (2) graphical report, or (3) new chart. |
| CVE-2011-3383 | Cross-site scripting (XSS) vulnerability in KENT-WEB WEB FORUM 5.1 and earlier allows remote attackers to inject arbitrary web script or HTML via vectors related to "the web page to be output." |
| CVE-2011-3361 | Cross-site scripting (XSS) vulnerability in CGI/Browse.pm in BackupPC 3.2.0 and possibly other versions before 3.2.1 allows remote attackers to inject arbitrary web script or HTML via the num parameter in a browse action to index.cgi. |
| CVE-2011-2766 | The FCGI (aka Fast CGI) module 0.70 through 0.73 for Perl, as used by CGI::Fast, uses environment variable values from one request during processing of a later request, which allows remote attackers to bypass authentication via crafted HTTP headers. |
| CVE-2011-2702 | Integer signedness error in Glibc before 2.13 and eglibc before 2.13, when using Supplemental Streaming SIMD Extensions 3 (SSSE3) optimization, allows context-dependent attackers to execute arbitrary code via a negative length parameter to (1) memcpy-ssse3-rep.S, (2) memcpy-ssse3.S, or (3) memset-sse2.S in sysdeps/i386/i686/multiarch/, which triggers an out-of-bounds read, as demonstrated using the memcpy function. |
| CVE-2011-2477 | Multiple cross-site scripting (XSS) vulnerabilities in config.c in config.cgi in Icinga before 1.4.1, when escape_html_tags is disabled, allow remote attackers to inject arbitrary web script or HTML via a JavaScript expression, as demonstrated by the onload attribute of a BODY element located after a check-host-alive! sequence, a different vulnerability than CVE-2011-2179. |
| CVE-2011-2215 | Unspecified vulnerability in WalRack 1.x before 1.1.8 and 2.x before 2.0.6 has unknown impact and attack vectors, possibly related to file deletion and an encoded URL, a different vulnerability than CVE-2011-1329. |
| CVE-2011-2179 | Multiple cross-site scripting (XSS) vulnerabilities in config.c in config.cgi in (1) Nagios 3.2.3 and (2) Icinga before 1.4.1 allow remote attackers to inject arbitrary web script or HTML via the expand parameter, as demonstrated by an (a) command action or a (b) hosts action. |
| CVE-2011-1937 | Cross-site scripting (XSS) vulnerability in Webmin 1.540 and earlier allows local users to inject arbitrary web script or HTML via a chfn command that changes the real (aka Full Name) field, related to useradmin/index.cgi and useradmin/user-lib.pl. |
| CVE-2011-1920 | The make include files in NetBSD before 1.6.2, as used in pmake 1.111 and other products, allow local users to overwrite arbitrary files via a symlink attack on a /tmp/_depend##### temporary file, related to (1) bsd.lib.mk and (2) bsd.prog.mk. |
| CVE-2011-1523 | Cross-site scripting (XSS) vulnerability in statusmap.c in statusmap.cgi in Nagios 3.2.3 and earlier allows remote attackers to inject arbitrary web script or HTML via the layer parameter. |
| CVE-2011-1329 | WalRack 1.x before 1.1.9 and 2.x before 2.0.7 does not properly restrict file uploads, which allows remote attackers to execute arbitrary PHP code via vectors involving a double extension, as demonstrated by a .php.zzz file. |
| CVE-2011-1081 | modrdn.c in slapd in OpenLDAP 2.4.x before 2.4.24 allows remote attackers to cause a denial of service (daemon crash) via a relative Distinguished Name (DN) modification request (aka MODRDN operation) that contains an empty value for the OldDN field. |
| CVE-2011-1027 | Off-by-one error in the convert_query_hexchar function in html.c in cgit.cgi in cgit before 0.8.3.5 allows remote attackers to cause a denial of service (infinite loop) via a string composed of a % (percent) character followed by invalid hex characters, as demonstrated by a %gg sequence. |
| CVE-2011-1025 | bind.cpp in back-ndb in OpenLDAP 2.4.x before 2.4.24 does not require authentication for the root Distinguished Name (DN), which allows remote attackers to bypass intended access restrictions via an arbitrary password. |
| CVE-2011-1024 | chain.c in back-ldap in OpenLDAP 2.4.x before 2.4.24, when a master-slave configuration with a chain overlay and ppolicy_forward_updates (aka authentication-failure forwarding) is used, allows remote authenticated users to bypass external-program authentication by sending an invalid password to a slave server. |
| CVE-2011-1015 | The is_cgi method in CGIHTTPServer.py in the CGIHTTPServer module in Python 2.5, 2.6, and 3.0 allows remote attackers to read script source code via an HTTP GET request that lacks a / (slash) character at the beginning of the URI. |
| CVE-2011-0707 | Multiple cross-site scripting (XSS) vulnerabilities in Cgi/confirm.py in GNU Mailman 2.1.14 and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) full name or (2) username field in a confirmation message. |
| CVE-2011-0486 | Cross-site scripting (XSS) vulnerability in cognos.cgi in IBM Cognos 8 Business Intelligence (BI) 8.4.1 before FP1 allows remote attackers to inject arbitrary web script or HTML via the pathinfo parameter. |
| CVE-2011-0455 | Cross-site scripting (XSS) vulnerability in Things BBS before 2.0.3 and BBS Thread before 2.0.3 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2011-0382 | The CGI subsystem on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 allows remote attackers to execute arbitrary commands via a request to TCP port 443, related to a "command injection vulnerability," aka Bug ID CSCtf97221. |
| CVE-2011-0375 | The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.6.x allows remote authenticated users to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCth24671. |
| CVE-2011-0374 | The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote authenticated users to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31659. |
| CVE-2011-0373 | The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote authenticated users to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31685. |
| CVE-2011-0372 | The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote attackers to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31640. |
| CVE-2011-0344 | Multiple stack-based buffer overflows in unspecified CGI programs in the Unified Maintenance Tool web interface in the embedded web server in the Communication Server (CS) in Alcatel-Lucent OmniPCX Enterprise before R9.0 H1.301.50 allow remote attackers to execute arbitrary code via crafted HTTP headers. |
| CVE-2011-0271 | The CGI scripts in HP OpenView Network Node Manager (OV NNM) 7.51 and 7.53 do not properly validate an unspecified parameter, which allows remote attackers to execute arbitrary commands by using a command string for this parameter's value, related to a "command injection vulnerability." |
| CVE-2011-0050 | Cross-site scripting (XSS) vulnerability in the nonjs interface (interfaces/nonjs.pm) in CGI:IRC before 0.5.10 allows remote attackers to inject arbitrary web script or HTML via the R parameter. |
| CVE-2011-0049 | Directory traversal vulnerability in the _list_file_get function in lib/Majordomo.pm in Majordomo 2 before 20110131 allows remote attackers to read arbitrary files via .. (dot dot) sequences in the help command, as demonstrated using (1) a crafted email and (2) cgi-bin/mj_wwwusr in the web interface. |
| CVE-2011-0046 | Multiple cross-site request forgery (CSRF) vulnerabilities in Bugzilla before 3.2.10, 3.4.x before 3.4.10, 3.6.x before 3.6.4, and 4.0.x before 4.0rc2 allow remote attackers to hijack the authentication of arbitrary users for requests related to (1) adding a saved search in buglist.cgi, (2) voting in votes.cgi, (3) sanity checking in sanitycheck.cgi, (4) creating or editing a chart in chart.cgi, (5) column changing in colchange.cgi, and (6) adding, deleting, or approving a quip in quips.cgi. |
| CVE-2010-5330 | On certain Ubiquiti devices, Command Injection exists via a GET request to stainfo.cgi (aka Show AP info) because the ifname variable is not sanitized, as demonstrated by shell metacharacters. The fixed version is v4.0.1 for 802.11 ISP products, v5.3.5 for AirMax ISP products, and v5.4.5 for AirSync firmware. For example, Nanostation5 (Air OS) is affected. |
| CVE-2010-5145 | The Filtering Service in Websense Web Security and Web Filter before 6.3.1 Hotfix 136 and 7.x before 7.1.1 on Windows allows remote attackers to cause a denial of service (filtering outage) via a crafted sequence of characters in a URI. |
| CVE-2010-4964 | recorder_test.cgi on the D-Link DCS-2121 camera with firmware 1.04 allows remote attackers to execute arbitrary commands via shell metacharacters in the Password field, related to a "semicolon injection" vulnerability. |
| CVE-2010-4802 | Commands.pm in Mojolicious before 0.999928 does not properly perform CGI environment detection, which has unspecified impact and remote attack vectors. |
| CVE-2010-4732 | cgi-bin/read.cgi in WebSCADA WS100 and WS200, Easy Connect EC150, Modbus RTU - TCP Gateway MB100, and Serial Ethernet Server SS100 on the IntelliCom NetBiter NB100 and NB200 platforms allows remote authenticated administrators to execute arbitrary code by using a config.html 2.conf action to replace the logo page's GIF image file with a file containing this code, a different vulnerability than CVE-2009-4463. |
| CVE-2010-4731 | Absolute path traversal vulnerability in cgi-bin/read.cgi in WebSCADA WS100 and WS200, Easy Connect EC150, Modbus RTU - TCP Gateway MB100, and Serial Ethernet Server SS100 on the IntelliCom NetBiter NB100 and NB200 platforms allows remote authenticated administrators to read arbitrary files via a full pathname in the file parameter, a different vulnerability than CVE-2009-4463. |
| CVE-2010-4730 | Directory traversal vulnerability in cgi-bin/read.cgi in WebSCADA WS100 and WS200, Easy Connect EC150, Modbus RTU - TCP Gateway MB100, and Serial Ethernet Server SS100 on the IntelliCom NetBiter NB100 and NB200 platforms allows remote authenticated administrators to read arbitrary files via a .. (dot dot) in the page parameter, a different vulnerability than CVE-2009-4463. |
| CVE-2010-4695 | A certain Fedora patch for gif2png.c in gif2png 2.5.1 and 2.5.2, as distributed in gif2png-2.5.1-1200.fc12 on Fedora 12 and gif2png_2.5.2-1 on Debian GNU/Linux, truncates a GIF pathname specified on the command line, which might allow remote attackers to create PNG files in unintended directories via a crafted command-line argument, as demonstrated by a CGI program that launches gif2png, a different vulnerability than CVE-2009-5018. |
| CVE-2010-4694 | Buffer overflow in gif2png.c in gif2png 2.5.3 and earlier might allow context-dependent attackers to cause a denial of service (application crash) or have unspecified other impact via a GIF file that contains many images, leading to long extensions such as .p100 for PNG output files, as demonstrated by a CGI program that launches gif2png, a different vulnerability than CVE-2009-5018. |
| CVE-2010-4572 | CRLF injection vulnerability in chart.cgi in Bugzilla before 3.2.10, 3.4.x before 3.4.10, 3.6.x before 3.6.4, and 4.0.x before 4.0rc2 allows remote attackers to inject arbitrary HTTP headers and conduct HTTP response splitting attacks via the query string, a different vulnerability than CVE-2010-2761 and CVE-2010-4411. |
| CVE-2010-4507 | Multiple cross-site request forgery (CSRF) vulnerabilities on the iSpot 2.0.0.0 R1679, and the ClearSpot 2.0.0.0 R1512 and R1786, with firmware 1.9.9.4 allow remote attackers to hijack the authentication of administrators for requests that (1) execute arbitrary commands via the cmd parameter in an act_cmd_result action to webmain.cgi, (2) enable remote management via an enable_remote_access act_network_set action to webmain.cgi, (3) enable the TELNET service via an ENABLE_TELNET act_set_wimax_etc_config action to webmain.cgi, (4) enable TELNET sessions via a certain act_network_set action to webmain.cgi, or (5) read arbitrary files via the FILE_PATH parameter in an act_file_download action to upgrademain.cgi. |
| CVE-2010-4500 | Multiple SQL injection vulnerabilities in contact.php in MRCGIGUY (MCG) FreeTicket 1.0.0, when magic_quotes_gpc is disabled, allow remote attackers to execute arbitrary SQL commands via the (1) name, (2) email, (3) subject, and (4) message parameters in a sendmess action. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2010-4411 | Unspecified vulnerability in CGI.pm 3.50 and earlier allows remote attackers to inject arbitrary HTTP headers and conduct HTTP response splitting attacks via unknown vectors. NOTE: this issue exists because of an incomplete fix for CVE-2010-2761. |
| CVE-2010-4410 | CRLF injection vulnerability in the header function in (1) CGI.pm before 3.50 and (2) Simple.pm in CGI::Simple 1.112 and earlier allows remote attackers to inject arbitrary HTTP headers and conduct HTTP response splitting attacks via vectors related to non-whitespace characters preceded by newline characters, a different vulnerability than CVE-2010-2761 and CVE-2010-3172. |
| CVE-2010-4368 | awstats.cgi in AWStats before 7.0 on Windows accepts a configdir parameter in the URL, which allows remote attackers to execute arbitrary commands via a crafted configuration file located at a UNC share pathname. |
| CVE-2010-4367 | awstats.cgi in AWStats before 7.0 accepts a configdir parameter in the URL, which allows remote attackers to execute arbitrary commands via a crafted configuration file located on a (1) WebDAV server or (2) NFS server. |
| CVE-2010-4363 | Multiple SQL injection vulnerabilities in contact.php in MRCGIGUY (MCG) FreeTicket 1.0.0, when magic_quotes_gpc is disabled, allow remote attackers to execute arbitrary SQL commands via the (1) id and (2) email parameters in a showtickets action. |
| CVE-2010-4358 | Multiple cross-site scripting (XSS) vulnerabilities in gb.cgi in MRCGIGUY (MCG) Guestbook 1.0 allow remote attackers to inject arbitrary web script or HTML via the (1) name, (2) email, (3) website, and (4) message parameters. |
| CVE-2010-3926 | Multiple cross-site scripting (XSS) vulnerabilities in Shop.cgi in SGX-SP Final before 11.00 and SGX-SP Final NE before 11.00 allow remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2010-3872 | A flaw was found in the mod_fcgid module of httpd. A malformed FastCGI response may result in a stack-based buffer overflow in the modules/fcgid/fcgid_bucket.c file in the fcgid_header_bucket_read() function, resulting in an application crash. |
| CVE-2010-3037 | goform/websXMLAdminRequestCgi.cgi in Cisco Unified Videoconferencing (UVC) System 5110 and 5115, and possibly Unified Videoconferencing System 3545 and 5230, Unified Videoconferencing 3527 Primary Rate Interface (PRI) Gateway, Unified Videoconferencing 3522 Basic Rate Interfaces (BRI) Gateway, and Unified Videoconferencing 3515 Multipoint Control Unit (MCU), allows remote authenticated administrators to execute arbitrary commands via the username field, related to a "shell command injection vulnerability," aka Bug ID CSCti54059. |
| CVE-2010-2761 | The multipart_init function in (1) CGI.pm before 3.50 and (2) Simple.pm in CGI::Simple 1.112 and earlier uses a hardcoded value of the MIME boundary string in multipart/x-mixed-replace content, which allows remote attackers to inject arbitrary HTTP headers and conduct HTTP response splitting attacks via crafted input that contains this value, a different vulnerability than CVE-2010-3172. |
| CVE-2010-2758 | Bugzilla 2.17.1 through 3.2.7, 3.3.1 through 3.4.7, 3.5.1 through 3.6.1, and 3.7 through 3.7.2 generates different error messages depending on whether a product exists, which makes it easier for remote attackers to guess product names via unspecified use of the (1) Reports or (2) Duplicates page. |
| CVE-2010-2626 | index.pl in Miyabi CGI Tools SEO Links 1.02 allows remote attackers to execute arbitrary commands via shell metacharacters in the fn command. NOTE: some of these details are obtained from third party information. |
| CVE-2010-2540 | mapserv.c in mapserv in MapServer before 4.10.6 and 5.x before 5.6.4 does not properly restrict the use of CGI command-line arguments that were intended for debugging, which allows remote attackers to have an unspecified impact via crafted arguments. |
| CVE-2010-2506 | Cross-site scripting (XSS) vulnerability in debug.cgi in Linksys WAP54Gv3 firmware 3.05.03 and 3.04.03 allows remote attackers to inject arbitrary web script or HTML via the data1 parameter. |
| CVE-2010-2491 | Cross-site scripting (XSS) vulnerability in cgi/client.py in Roundup before 1.4.14 allows remote attackers to inject arbitrary web script or HTML via the template argument to the /issue program. |
| CVE-2010-2367 | Cross-site scripting (XSS) vulnerability in search.cgi in AD-EDIT2 before 3.0.9 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2010-2366 | Cross-site scripting (XSS) vulnerability in futomi CGI Cafe Access Analyzer CGI Professional, and Standard 4.0.2 and earlier, allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2010-2365 | Cross-site scripting (XSS) vulnerability in Free CGI Moo moobbs2 before 1.03 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2010-2364 | Cross-site scripting (XSS) vulnerability in Free CGI Moo moobbs before 1.03 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2010-2290 | Cross-site scripting (XSS) vulnerability in cgi-bin/cgix/help in McAfee Unified Threat Management (UTM) Firewall (formerly SnapGear) firmware 3.0.0 through 4.0.6 allows remote attackers to inject arbitrary web script or HTML via the page parameter. |
| CVE-2010-2289 | Open redirect vulnerability in dana/home/homepage.cgi in Juniper Networks IVE 6.5R1 (Build 14599) and 6.5R2 (Build 14951) allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via a URL in the Location parameter. |
| CVE-2010-2288 | Cross-site scripting (XSS) vulnerability in dana/nc/ncrun.cgi in Juniper Networks IVE 6.5R1 (Build 14599) and 6.5R2 (Build 14951) allows remote attackers to inject arbitrary web script or HTML via the DSSignInURL cookie. |
| CVE-2010-2271 | Format string vulnerability in authcfg.cgi in Accoria Web Server (aka Rock Web Server) 1.4.7 allows remote attackers to have an unspecified impact via format string specifiers in the path (aka Password File) parameter. |
| CVE-2010-2269 | Directory traversal vulnerability in loadstatic.cgi in Accoria Web Server (aka Rock Web Server) 1.4.7 allows remote attackers to read arbitrary files via a .. (dot dot) in the name parameter. |
| CVE-2010-2268 | Cross-site request forgery (CSRF) vulnerability in authcfg.cgi in Accoria Web Server (aka Rock Web Server) 1.4.7 allows remote attackers to hijack the authentication of administrators for requests that create user accounts. |
| CVE-2010-2267 | Multiple cross-site scripting (XSS) vulnerabilities in Accoria Web Server (aka Rock Web Server) 1.4.7 allow remote attackers to inject arbitrary web script or HTML via (1) the query string to the getenv sample program, (2) the desc parameter to loadstatic.cgi, (3) the name parameter to httpdcfg.cgi, or (4) the dns parameter to servercfg.cgi. |
| CVE-2010-2261 | Linksys WAP54Gv3 firmware 3.04.03 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) data2 and (2) data3 parameters to (a) Debug_command_page.asp and (b) debug.cgi. |
| CVE-2010-1748 | The cgi_initialize_string function in cgi-bin/var.c in the web interface in CUPS before 1.4.4, as used on Apple Mac OS X 10.5.8, Mac OS X 10.6 before 10.6.4, and other platforms, does not properly handle parameter values containing a % (percent) character without two subsequent hex characters, which allows context-dependent attackers to obtain sensitive information from cupsd process memory via a crafted request, as demonstrated by the (1) /admin?OP=redirect&URL=% and (2) /admin?URL=/admin/&OP=% URIs. |
| CVE-2010-1709 | Multiple cross-site scripting (XSS) vulnerabilities in upload.cgi in G5-Scripts Auto-Img-Gallery 1.1 allow remote attackers to inject arbitrary web script or HTML via the (1) user and (2) pass parameters. |
| CVE-2010-1573 | Linksys WAP54Gv3 firmware 3.04.03 and earlier uses a hard-coded username (Gemtek) and password (gemtekswd) for a debug interface for certain web pages, which allows remote attackers to execute arbitrary commands via the (1) data1, (2) data2, or (3) data3 parameters to (a) Debug_command_page.asp and (b) debug.cgi. |
| CVE-2010-1555 | Stack-based buffer overflow in getnnmdata.exe in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via an invalid Hostname parameter. |
| CVE-2010-1554 | Stack-based buffer overflow in getnnmdata.exe in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via an invalid iCount parameter. |
| CVE-2010-1553 | Stack-based buffer overflow in getnnmdata.exe in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via an invalid MaxAge parameter. |
| CVE-2010-1552 | Stack-based buffer overflow in the doLoad function in snmpviewer.exe in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via the act and app parameters. |
| CVE-2010-1551 | Stack-based buffer overflow in the _OVParseLLA function in ov.dll in netmon.exe in Network Monitor in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via the sel parameter. |
| CVE-2010-1550 | Format string vulnerability in ovet_demandpoll.exe in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via format string specifiers in the sel parameter. |
| CVE-2010-1156 | core/nicklist.c in Irssi before 0.8.15 allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via vectors related to an attempted fuzzy nick match at the instant that a victim leaves a channel. |
| CVE-2010-1106 | PHP remote file inclusion vulnerability in cgi/index.php in AdvertisementManager 3.1.0 allows remote attackers to execute arbitrary PHP code via a URL in the req parameter. NOTE: this can also be leveraged to include and execute arbitrary local files via .. (dot dot) sequences. |
| CVE-2010-1105 | Cross-site scripting (XSS) vulnerability in cgi/index.php in AdvertisementManager 3.1.0 and 3.6 allows remote attackers to inject arbitrary web script or HTML via the usr parameter. |
| CVE-2010-1068 | Multiple cross-site scripting (XSS) vulnerabilities in surgeftpmgr.cgi in NetWin SurgeFTP 2.3a6 allow remote attackers to inject arbitrary web script or HTML via the (1) domainid or (2) classid parameter in a class action. |
| CVE-2010-0454 | SQL injection vulnerability in cgi/cgilua.exe/sys/start.htm in Publique! 2.3 allows remote attackers to execute arbitrary SQL commands via the sid parameter. |
| CVE-2009-5157 | On Linksys WAG54G2 1.00.10 devices, there is authenticated command injection via shell metacharacters in the setup.cgi c4_ping_ipaddr variable. |
| CVE-2009-5156 | An issue was discovered on ASMAX AR-804gu 66.34.1 devices. There is Command Injection via the cgi-bin/script query string. |
| CVE-2009-5114 | Directory traversal vulnerability in wgarcmin.cgi in WebGlimpse 2.18.7 and earlier allows remote attackers to read arbitrary files via a .. (dot dot) in the DOC parameter. |
| CVE-2009-5113 | Cross-site scripting (XSS) vulnerability in wgarcmin.cgi in WebGlimpse 2.18.7 and earlier allows remote attackers to inject arbitrary web script or HTML via the DOC parameter. |
| CVE-2009-5112 | wgarcmin.cgi in WebGlimpse 2.18.7 and earlier allows remote attackers to obtain the installation path via a crafted request. |
| CVE-2009-5018 | Stack-based buffer overflow in gif2png.c in gif2png 2.5.3 and earlier might allow context-dependent attackers to execute arbitrary code via a long command-line argument, as demonstrated by a CGI program that launches gif2png. |
| CVE-2009-4882 | Cross-site scripting (XSS) vulnerability in zc/publisher/html.rb in ZoneCheck 2.0.4-13 and 2.1.0 allows remote attackers to inject arbitrary web script or HTML via the ns parameter to zc.cgi. |
| CVE-2009-4866 | Cross-site scripting (XSS) vulnerability in search.cgi in Matt's Script Archive (MSA) Simple Search 1.0 allows remote attackers to inject arbitrary web script or HTML via the terms parameter. NOTE: some of these details are obtained from third party information. |
| CVE-2009-4821 | The D-Link DIR-615 with firmware 3.10NA does not require administrative authentication for apply.cgi, which allows remote attackers to (1) change the admin password via the admin_password parameter, (2) disable the security requirement for the Wi-Fi network via unspecified vectors, or (3) modify DNS settings via unspecified vectors. |
| CVE-2009-4720 | SQL injection vulnerability in cgi-bin/gnudip.cgi in GnuDIP 2.1.1 allows remote attackers to execute arbitrary SQL commands via the username parameter. NOTE: some of these details are obtained from third party information. |
| CVE-2009-4555 | Multiple cross-site request forgery (CSRF) vulnerabilities in AgoraCart 5.2.005 and 5.2.006 and AgoraCart GOLD 5.5.005 allow remote attackers to hijack the authentication of administrators for requests that (1) modify a .htaccess file via an unspecified request to protected/manager.cgi or (2) change the password of an administrative account. |
| CVE-2009-4180 | Stack-based buffer overflow in snmpviewer.exe in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via a long HTTP Host header. |
| CVE-2009-4179 | Stack-based buffer overflow in ovalarm.exe in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via a long HTTP Accept-Language header in an OVABverbose action. |
| CVE-2009-4178 | Heap-based buffer overflow in OvWebHelp.exe in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via a long Topic parameter. |
| CVE-2009-4177 | Buffer overflow in webappmon.exe in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via a long HTTP Host header. |
| CVE-2009-3846 | Multiple heap-based buffer overflows in ovlogin.exe in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allow remote attackers to execute arbitrary code via a long (1) userid or (2) passwd parameter. |
| CVE-2009-3166 | token.cgi in Bugzilla 3.4rc1 through 3.4.1 places a password in a URL at the beginning of a login session that occurs immediately after a password reset, which allows context-dependent attackers to discover passwords by reading (1) web-server access logs, (2) web-server Referer logs, or (3) the browser history. |
| CVE-2009-3124 | Directory traversal vulnerability in get_message.cgi in QuarkMail allows remote attackers to read arbitrary files via a .. (dot dot) in the tf parameter. |
| CVE-2009-2947 | Cross-site scripting (XSS) vulnerability in Xapian Omega before 1.0.16 allows remote attackers to inject arbitrary web script or HTML via unspecified CGI parameter values, which are sometimes included in exception messages. |
| CVE-2009-2925 | Directory traversal vulnerability in DJcalendar.cgi in DJCalendar allows remote attackers to read arbitrary files via a .. (dot dot) in the TEMPLATE parameter. |
| CVE-2009-2766 | httpd.c in httpd in the management GUI in DD-WRT 24 sp1 does not require administrative authentication for programs under cgi-bin/, which allows remote attackers to change settings via HTTP requests. |
| CVE-2009-2765 | httpd.c in httpd in the management GUI in DD-WRT 24 sp1, and other versions before build 12533, allows remote attackers to execute arbitrary commands via shell metacharacters in a request to a cgi-bin/ URI. |
| CVE-2009-2737 | The EditCSVAction function in cgi/actions.py in Roundup 1.2 before 1.2.1, 1.4 through 1.4.6, and possibly other versions does not properly check permissions, which allows remote authenticated users with edit or create privileges for a class to modify arbitrary items within that class, as demonstrated by editing all queries, modifying settings, and adding roles to users. |
| CVE-2009-2640 | Multiple SQL injection vulnerabilities in cgi/admin.cgi in Interlogy Profile Manager Basic allow remote attackers to execute arbitrary SQL commands via a pmadm cookie in (1) an edittemp action or (2) a users action. |
| CVE-2009-2639 | SQL injection vulnerability in admin.php in MRCGIGUY The Ticket System 2.0 allows remote attackers to execute arbitrary SQL commands via the id parameter in a viewticket action. |
| CVE-2009-2565 | Cross-site scripting (XSS) vulnerability in Perl CGI's By Mrs. Shiromuku shiromuku(fs6)DIARY 2.40 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2009-2492 | Cross-site scripting (XSS) vulnerability in mt-wizard.cgi in Six Apart Movable Type before 4.261 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, a different vulnerability than CVE-2009-2480. |
| CVE-2009-2481 | mt-wizard.cgi in Six Apart Movable Type before 4.261, when global templates are not initialized, allows remote attackers to bypass access restrictions and (1) send e-mail to arbitrary addresses or (2) obtain sensitive information via unspecified vectors. |
| CVE-2009-2480 | Cross-site scripting (XSS) vulnerability in mt-wizard.cgi in Six Apart Movable Type 4.24, and 4.25 when global templates are not initialized, allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2009-2461 | mathtex.cgi in mathTeX, when downloaded before 20090713, does not securely create temporary files, which has unspecified impact and local attack vectors. |
| CVE-2009-2460 | Multiple stack-based buffer overflows in mathtex.cgi in mathTeX, when downloaded before 20090713, have unspecified impact and remote attack vectors. |
| CVE-2009-2408 | Mozilla Network Security Services (NSS) before 3.12.3, Firefox before 3.0.13, Thunderbird before 2.0.0.23, and SeaMonkey before 1.1.18 do not properly handle a '\0' character in a domain name in the subject's Common Name (CN) field of an X.509 certificate, which allows man-in-the-middle attackers to spoof arbitrary SSL servers via a crafted certificate issued by a legitimate Certification Authority. NOTE: this was originally reported for Firefox before 3.5. |
| CVE-2009-2367 | cgi-bin/makecgi-pro in Iomega StorCenter Pro generates predictable session IDs, which allows remote attackers to hijack active sessions and gain privileges via brute force guessing attacks on the session_id parameter. |
| CVE-2009-2344 | The web-based management interfaces in Sourcefire Defense Center (DC) and 3D Sensor before 4.8.2 allow remote authenticated users to gain privileges via a $admin value for the admin parameter in an edit action to admin/user/user.cgi and unspecified other components. |
| CVE-2009-2323 | The web interface on the Axesstel MV 410R redirects users back to the referring page after execution of some CGI scripts, which makes it easier for remote attackers to avoid detection of cross-site request forgery (CSRF) attacks, as demonstrated by a redirect from the cgi-bin/wireless.cgi script. |
| CVE-2009-2322 | Cross-site scripting (XSS) vulnerability in cgi-bin/sysconf.cgi on the Axesstel MV 410R allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2009-2321 | cgi-bin/sysconf.cgi on the Axesstel MV 410R allows remote attackers to cause a denial of service (configuration reset) via a RESTORE=RESTORE query string. |
| CVE-2009-2300 | The management interface in the phion airlock Web Application Firewall (WAF) 4.1-10.41 does not properly handle CGI requests that specify large width and height parameters for an image, which allows remote attackers to execute arbitrary commands or cause a denial of service (resource consumption) via a crafted request. |
| CVE-2009-2298 | Stack-based buffer overflow in rping in HP OpenView Network Node Manager (OV NNM) 7.53 on Linux allows remote attackers to execute arbitrary code via unspecified vectors, possibly involving a CGI request to webappmon.exe. NOTE: this may overlap CVE-2009-1420. |
| CVE-2009-2288 | statuswml.cgi in Nagios before 3.1.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) ping or (2) Traceroute parameters. |
| CVE-2009-2258 | Directory traversal vulnerability in cgi-bin/webcm in the administrative web interface on the Netgear DG632 with firmware 3.4.0_ap allows remote attackers to list arbitrary directories via a .. (dot dot) in the nextpage parameter. |
| CVE-2009-2256 | The administrative web interface on the Netgear DG632 with firmware 3.4.0_ap allows remote attackers to cause a denial of service (web outage) via an HTTP POST request to cgi-bin/firmwarecfg. |
| CVE-2009-2123 | Multiple SQL injection vulnerabilities in Elvin 1.2.0 allow remote attackers to execute arbitrary SQL commands via the (1) inUser (aka Username) and (2) inPass (aka Password) parameters to (a) inc/login.ei, reachable through login.php; and the (3) id parameter to (b) show_bug.php and (c) show_activity.php. NOTE: it was later reported that vector 3c also affects 1.2.2. |
| CVE-2009-2080 | admin.php in MRCGIGUY The Ticket System 2.0 does not properly restrict access, which allows remote attackers to (1) obtain sensitive configuration information via the editconfig action or (2) change the administrator's password via the id parameter in an editop action. |
| CVE-2009-1790 | Cross-site scripting (XSS) vulnerability in CGI RESCUE Trees before 2.11 allows remote attackers to inject arbitrary web script or HTML via unspecified parameters. |
| CVE-2009-1591 | CRLF injection vulnerability in CGI RESCUE Web Mailer before 1.04 allows remote attackers to inject arbitrary HTTP headers, and conduct cross-site scripting (XSS) or HTTP response splitting attacks, via CRLF sequences in an unspecified web form. |
| CVE-2009-1590 | Unspecified vulnerability in CGI RESCUE FORM2MAIL before 1.42 allows remote attackers to send email to arbitrary recipients via a web form. |
| CVE-2009-1589 | Unspecified vulnerability in CGI RESCUE MiniBBS22 before 1.01 allows remote attackers to send email to arbitrary recipients via unknown vectors. |
| CVE-2009-1588 | Cross-site scripting (XSS) vulnerability in CGI RESCUE MiniBBS 8t before 8.95t, 8 before 8.95, 9 before 9.08, and 10 before 10.32 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2009-1561 | Cross-site request forgery (CSRF) vulnerability in administration.cgi on the Cisco Linksys WRT54GC router with firmware 1.05.7 allows remote attackers to hijack the intranet connectivity of arbitrary users for requests that change the administrator password via the sysPasswd and sysConfirmPasswd parameters. |
| CVE-2009-1559 | Absolute path traversal vulnerability in adm/file.cgi on the Cisco Linksys WVC54GCA wireless video camera with firmware 1.00R24 and possibly 1.00R22 allows remote attackers to read arbitrary files via an absolute pathname in the this_file parameter. NOTE: traversal via a .. (dot dot) is probably also possible. |
| CVE-2009-1558 | Directory traversal vulnerability in adm/file.cgi on the Cisco Linksys WVC54GCA wireless video camera with firmware 1.00R22 and 1.00R24 allows remote attackers to read arbitrary files via a %2e. (encoded dot dot) or an absolute pathname in the next_file parameter. |
| CVE-2009-1557 | Multiple cross-site scripting (XSS) vulnerabilities on the Cisco Linksys WVC54GCA wireless video camera with firmware 1.00R22 and 1.00R24 allow remote attackers to inject arbitrary web script or HTML via the next_file parameter to (1) main.cgi, (2) img/main.cgi, or (3) adm/file.cgi; or (4) the this_file parameter to adm/file.cgi. |
| CVE-2009-1556 | img/main.cgi on the Cisco Linksys WVC54GCA wireless video camera with firmware 1.00R22 and 1.00R24 allows remote authenticated users to read arbitrary files in img/ via a filename in the next_file parameter, as demonstrated by reading .htpasswd to obtain the admin password, a different vulnerability than CVE-2004-2507. |
| CVE-2009-1383 | The getdirective function in mathtex.cgi in mathTeX, when downloaded before 20090713, allows remote attackers to execute arbitrary commands via shell metacharacters in the dpi tag. |
| CVE-2009-1382 | Multiple stack-based buffer overflows in mimetex.cgi in mimeTeX, when downloaded before 20090713, allow remote attackers to execute arbitrary code via a TeX file with long (1) picture, (2) circle, or (3) input tags. |
| CVE-2009-1213 | Cross-site request forgery (CSRF) vulnerability in attachment.cgi in Bugzilla 3.2 before 3.2.3, 3.3 before 3.3.4, and earlier versions allows remote attackers to hijack the authentication of arbitrary users for requests that use attachment editing. |
| CVE-2009-1206 | Unspecified vulnerability in futomi's CGI Cafe Access Analyzer CGI Professional Version 4.11.5 and earlier allows remote attackers to gain administrative privileges via unknown vectors. |
| CVE-2009-1175 | Cross-site scripting (XSS) vulnerability in apps/web/vs_diag.cgi in the DAAP extension in Banshee 1.4.2 allows remote attackers to inject arbitrary web script or HTML via the server parameter, which is not properly handled in an error message. |
| CVE-2009-0971 | Cross-site scripting (XSS) vulnerability in futomi's CGI Cafe Access Analyzer CGI Standard Version 3.8.1 and earlier allows remote attackers to inject arbitrary web script or HTML via unknown vectors. |
| CVE-2009-0962 | Unspecified vulnerability in Futomi's CGI Cafe MP Form Mail CGI eCommerce 1.3.0 and earlier, and CGI Professional 3.2.2 and earlier, allows remote attackers to gain administrative privileges via unknown attack vectors. |
| CVE-2009-0680 | cgi-bin/welcome/VPN_only in the web interface in Netgear SSL312 allows remote attackers to cause a denial of service (device crash) via a crafted query string, as demonstrated using directory traversal sequences. |
| CVE-2009-0588 | agent/request/op.cgi in the Registration Authority (RA) component in Red Hat Certificate System (RHCS) 7.3 and Dogtag Certificate System allows remote authenticated users to approve certificate requests queued for arbitrary agent groups via a modified request ID field. |
| CVE-2009-0545 | cgi-bin/kerbynet in ZeroShell 1.0beta11 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in the type parameter in a NoAuthREQ x509List action. |
| CVE-2009-0485 | Cross-site request forgery (CSRF) vulnerability in Bugzilla 2.17 to 2.22.7, 3.0 before 3.0.7, 3.2 before 3.2.1, and 3.3 before 3.3.2 allows remote attackers to delete unused flag types via a link or IMG tag to editflagtypes.cgi. |
| CVE-2009-0484 | Cross-site request forgery (CSRF) vulnerability in Bugzilla 3.0 before 3.0.7, 3.2 before 3.2.1, and 3.3 before 3.3.2 allows remote attackers to delete shared or saved searches via a link or IMG tag to buglist.cgi. |
| CVE-2009-0483 | Cross-site request forgery (CSRF) vulnerability in Bugzilla 2.22 before 2.22.7, 3.0 before 3.0.7, 3.2 before 3.2.1, and 3.3 before 3.3.2 allows remote attackers to delete keywords and user preferences via a link or IMG tag to (1) editkeywords.cgi or (2) userprefs.cgi. |
| CVE-2009-0482 | Cross-site request forgery (CSRF) vulnerability in Bugzilla before 3.2 before 3.2.1, 3.3 before 3.3.2, and other versions before 3.2 allows remote attackers to perform bug updating activities as other users via a link or IMG tag to process_bug.cgi. |
| CVE-2009-0469 | Unspecified vulnerability in futomi's CGI Cafe Fulltext search CGI 1.1.2 allows remote attackers to gain administrative privileges via unknown vectors. |
| CVE-2009-0393 | Cross-site scripting (XSS) vulnerability in sysconf.cgi in Motorola Wimax modem CPEi300 allows remote authenticated users to inject arbitrary web script or HTML via the page parameter. |
| CVE-2009-0392 | Directory traversal vulnerability in sysconf.cgi in Motorola Wimax modem CPEi300 allows remote authenticated users to read arbitrary files via a .. (dot dot) in the page parameter. |
| CVE-2008-7165 | Cross-site request forgery in cp06_wifi_m_nocifr.cgi in the administrator panel in TELECOM ITALIA Alice Gate2 Plus Wi-Fi allows remote attackers to hijack the authentication of administrators for requests that disable Wi-Fi encryption via certain values for the wlChannel and wlRadioEnable parameters. |
| CVE-2008-7121 | Cross-site scripting (XSS) vulnerability in Mr. CGI Guy Hot Links SQL-PHP 3 and earlier allows remote attackers to inject arbitrary web script or HTML via the search bar. |
| CVE-2008-7120 | SQL injection vulnerability in Mr. CGI Guy Hot Links SQL-PHP 3 and earlier allows remote attackers to execute arbitrary SQL commands via the news.php parameter. |
| CVE-2008-7115 | The web interface to the Belkin Wireless G router and ADSL2 modem F5D7632-4V6 with firmware 6.01.08 allows remote attackers to bypass authentication and gain administrator privileges via a direct request to (1) statusprocess.exe, (2) system_all.exe, or (3) restore.exe in cgi-bin/. NOTE: the setup_dns.exe vector is already covered by CVE-2008-1244. |
| CVE-2008-7081 | userHandler.cgi in RaidSonic ICY BOX NAS firmware 2.3.2.IB.2.RS.1 allows remote attackers to bypass authentication and gain administrator privileges by setting the login parameter to admin. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2008-6975 | Multiple cross-site request forgery (CSRF) vulnerabilities in apply.cgi in DD-WRT 24 sp2 allow remote attackers to hijack the authentication of administrators for requests that (1) execute arbitrary commands via the ping_ip parameter; (2) change the administrative credentials via the http_username and http_passwd parameters; (3) enable remote administration via the remote_management parameter; or (4) configure port forwarding via certain from, to, ip, and pro parameters. NOTE: This issue reportedly exists because of a "weak ... anti-CSRF fix" implemented in 24 sp2. |
| CVE-2008-6974 | Multiple cross-site request forgery (CSRF) vulnerabilities in apply.cgi in DD-WRT 24 sp1 and earlier allow remote attackers to hijack the authentication of administrators for requests that (1) execute arbitrary commands via the ping_ip parameter; (2) change the administrative credentials via the http_username and http_passwd parameters; (3) enable remote administration via the remote_management parameter; or (4) configure port forwarding via certain from, to, ip, and pro parameters. |
| CVE-2008-6945 | Multiple cross-site scripting (XSS) vulnerabilities in Interchange 5.7 before 5.7.1, 5.6 before 5.6.1, and 5.4 before 5.4.3 allow remote attackers to inject arbitrary web script or HTML via (1) the mv_order_item CGI variable parameter in Core, (2) the country-select widget, or (3) possibly the value specifier when used in the UserTag feature. |
| CVE-2008-6755 | ZoneMinder 1.23.3 on Fedora 10 sets the ownership of /etc/zm.conf to the apache user account, and sets the permissions to 0600, which makes it easier for remote attackers to modify this file by accessing it through a (1) PHP or (2) CGI script. |
| CVE-2008-6557 | cgi-bin/webutil.pl in The Puppet Master WebUtil 2.7 allows remote attackers to execute arbitrary commands via shell metacharacters in the details command. |
| CVE-2008-6556 | cgi-bin/webutil.pl in The Puppet Master WebUtil 2.3 allows remote attackers to execute arbitrary commands via shell metacharacters in the whois command. |
| CVE-2008-6555 | cgi-bin/webutil.pl in The Puppet Master WebUtil allows remote attackers to execute arbitrary commands via shell metacharacters in the dig command. |
| CVE-2008-6554 | cgi-bin/script in Aztech ADSL2/2+ 4-port router 3.7.0 build 070426 allows remote attackers to execute arbitrary commands via shell metacharacters in the query string. |
| CVE-2008-6448 | Cross-site scripting (XSS) vulnerability in install.cgi in SKYARC System MTCMS WYSIWYG Editor allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2008-6428 | The CGI framework in Kaya 0.4.0 allows remote attackers to inject arbitrary HTTP headers and conduct cross-site scripting (XSS) attacks via unspecified vectors. |
| CVE-2008-6373 | Unspecified vulnerability in Nagios before 3.0.6 has unspecified impact and remote attack vectors related to CGI programs, "adaptive external commands," and "writing newlines and submitting service comments." |
| CVE-2008-6280 | Cross-site scripting (XSS) vulnerability in apply.cgi on the Linksys WRT160N allows remote attackers to inject arbitrary web script or HTML via the action parameter in a DHCP_Static operation. |
| CVE-2008-6098 | Bugzilla 3.2 before 3.2 RC2, 3.0 before 3.0.6, 2.22 before 2.22.6, 2.20 before 2.20.7, and other versions after 2.17.4 allows remote authenticated users to bypass moderation to approve and disapprove quips via a direct request to quips.cgi with the action parameter set to "approve." |
| CVE-2008-5809 | futomi CGI Cafe Access Analyzer CGI Standard 4.0.1 and earlier and Access Analyzer CGI Professional 4.11.3 and earlier use a predictable session id, which makes it easier for remote attackers to hijack sessions, and obtain sensitive information about analysis results, via a modified id. |
| CVE-2008-5723 | Directory traversal vulnerability in CGI RESCUE KanniBBS2000 (aka KanniBBS2000i, MiniBBS2000, and MiniBBS2000i) before 1.03 allows remote attackers to read arbitrary files via unspecified vectors. |
| CVE-2008-5678 | Fretwell-Downing Informatics (FDI) OLIB7 WebView 2.5.1.1 allows remote authenticated users to obtain sensitive information from files via the infile parameter to the default URI under cgi/, as demonstrated by the (1) get_settings.ini, (2) setup.ini, and (3) text.ini files. |
| CVE-2008-5440 | Unspecified vulnerability in the TimesTen Data Server component in Oracle Database 7.0.5.0.0 allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors. NOTE: the previous information was obtained from the January 2009 CPU. Oracle has not commented on reliable researcher claims that this is a format string vulnerability via the msg parameter in the evtdump CGI module. |
| CVE-2008-5184 | The web interface (cgi-bin/admin.c) in CUPS before 1.3.8 uses the guest username when a user is not logged on to the web server, which makes it easier for remote attackers to bypass intended policy and conduct CSRF attacks via the (1) add and (2) cancel RSS subscription functions. |
| CVE-2008-5153 | spell-check-logic.cgi in Moodle 1.8.2 allows local users to overwrite arbitrary files via a symlink attack on the (1) /tmp/spell-check-debug.log, (2) /tmp/spell-check-before, or (3) /tmp/spell-check-after temporary file. |
| CVE-2008-5028 | Cross-site request forgery (CSRF) vulnerability in cmd.cgi in (1) Nagios 3.0.5 and (2) op5 Monitor before 4.0.1 allows remote attackers to send commands to the Nagios process, and trigger execution of arbitrary programs by this process, via unspecified HTTP requests. |
| CVE-2008-4938 | aegis 4.24 and aegis-web 4.24 allow local users to overwrite arbitrary files via a symlink attack on (a) /tmp/#####, (b) /tmp/#####.intro, (c) /tmp/aegis.#####.ae, (d) /tmp/aegis.#####, (e) /tmp/aegis.#####.1, (f) /tmp/aegis.#####.2, (g) /tmp/aegis.#####.log, and (h) /tmp/aegis.#####.out temporary files, related to the (1) bng_dvlpd.sh, (2) bng_rvwd.sh, (3) awt_dvlp.sh, (4) awt_intgrtn.sh, and (5) aegis.cgi scripts. |
| CVE-2008-4873 | board.cgi in Sepal SPBOARD 4.5 allows remote attackers to execute arbitrary commands via shell metacharacters in the file parameter during a down_file action. |
| CVE-2008-4737 | Cross-site scripting (XSS) vulnerability in wholite.cgi in WhoDomLite 1.1.3 allows remote attackers to inject arbitrary web script or HTML via the dom parameter. |
| CVE-2008-4690 | lynx 2.8.6dev.15 and earlier, when advanced mode is enabled and lynx is configured as a URL handler, allows remote attackers to execute arbitrary commands via a crafted lynxcgi: URL, a related issue to CVE-2005-2929. NOTE: this might only be a vulnerability in limited deployments that have defined a lynxcgi: handler. |
| CVE-2008-4663 | Cross-site scripting (XSS) vulnerability in analysis.cgi 1.44, as used in K's CGI Access Log Kaiseki (1) jcode.pl and (2) Jcode.pm, allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2008-4562 | Buffer overflow in the ovlaunch CGI program in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 on Windows allows remote attackers to execute arbitrary code via a crafted Host parameter. NOTE: this issue may be partially covered by CVE-2009-0205. |
| CVE-2008-4560 | HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to obtain sensitive information via (1) a crafted request to the nnmRptConfig.exe CGI program, which reveals the pathname of log directories; or (2) a crafted parameter in a request to the ovlaunch.exe CGI program, which reveals configuration details. NOTE: this issue may be partially covered by CVE-2009-0205. |
| CVE-2008-4559 | HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allows remote attackers to execute arbitrary code via shell metacharacters in argument fields to the (1) webappmon.exe or (2) OpenView5.exe CGI program. NOTE: this issue may be partially covered by CVE-2009-0205. |
| CVE-2008-4403 | The CGI modules in the server in Trend Micro OfficeScan 8.0 SP1 before build 2439 and 8.0 SP1 Patch 1 before build 3087 allow remote attackers to cause a denial of service (NULL pointer dereference and child process crash) via crafted HTTP headers, related to the "error handling mechanism." |
| CVE-2008-4402 | Multiple buffer overflows in CGI modules in the server in Trend Micro OfficeScan 8.0 SP1 before build 2439 and 8.0 SP1 Patch 1 before build 3087 allow remote attackers to execute arbitrary code via unspecified vectors. |
| CVE-2008-4379 | Cross-site scripting (XSS) vulnerability in report.php in Mr. CGI Guy Hot Links SQL-PHP 3.0 and earlier allows remote attackers to inject arbitrary web script or HTML via the id parameter. |
| CVE-2008-4378 | SQL injection vulnerability in report.php in Mr. CGI Guy Hot Links SQL-PHP 3.0 and earlier allows remote attackers to execute arbitrary SQL commands via the id parameter. |
| CVE-2008-4077 | The CGI scripts in (1) LedgerSMB (LSMB) before 1.2.15 and (2) SQL-Ledger 2.8.17 and earlier allow remote attackers to cause a denial of service (resource exhaustion) via an HTTP POST request with a large Content-Length. |
| CVE-2008-3862 | Stack-based buffer overflow in CGI programs in the server in Trend Micro OfficeScan 7.3 Patch 4 build 1367 and other builds before 1374, and 8.0 SP1 Patch 1 before build 3110, allows remote attackers to execute arbitrary code via an HTTP POST request containing crafted form data, related to "parsing CGI requests." |
| CVE-2008-3660 | PHP 4.4.x before 4.4.9, and 5.x through 5.2.6, when used as a FastCGI module, allows remote attackers to cause a denial of service (crash) via a request with multiple dots preceding the extension, as demonstrated using foo..php. |
| CVE-2008-3411 | The Axesstel AXW-D800 modem with D2_ETH_109_01_VEBR Jun-14-2006 software does not require authentication for (1) etc/config/System.html, (2) etc/config/Network.html, (3) etc/config/Security.html, (4) cgi-bin/sysconf.cgi, and (5) cgi-bin/route.cgi, which allows remote attackers to change the modem's configuration via direct requests. |
| CVE-2008-3403 | SQL injection vulnerability in mojoClassified.cgi in MojoPersonals allows remote attackers to execute arbitrary SQL commands via the cat parameter. |
| CVE-2008-3383 | SQL injection vulnerability in mojoAuto.cgi in MojoAuto allows remote attackers to execute arbitrary SQL commands via the cat_a parameter in a browse action. |
| CVE-2008-3382 | SQL injection vulnerability in mojoClassified.cgi in MojoClassifieds 2.0 allows remote attackers to execute arbitrary SQL commands via the cat_a parameter. |
| CVE-2008-3267 | SQL injection vulnerability in mojoJobs.cgi in MojoJobs allows remote attackers to execute arbitrary SQL commands via the cat_a parameter. |
| CVE-2008-2932 | Heap-based buffer overflow in Red Hat adminutil 1.1.6 allows remote attackers to cause a denial of service (daemon crash) or possibly execute arbitrary code via % (percent) encoded HTTP input to unspecified CGI scripts in Fedora Directory Server. NOTE: this vulnerability exists because of an incorrect fix for CVE-2008-2929. |
| CVE-2008-2928 | Multiple buffer overflows in the adminutil library in CGI applications in Red Hat Directory Server 7.1 before SP7 allow remote attackers to cause a denial of service (daemon crash) or possibly execute arbitrary code via a crafted Accept-Language HTTP header. |
| CVE-2008-2852 | Cross-site scripting (XSS) vulnerability in CGIWrap before 4.1, when an Internet Explorer based browser is used, allows remote attackers to inject arbitrary web script or HTML via unspecified vectors related to failure to set the charset in error messages. |
| CVE-2008-2835 | SQL injection vulnerability in cgi-bin/igsuite in IGSuite 3.2.4 allows remote attackers to execute arbitrary SQL commands via the formid parameter. |
| CVE-2008-2365 | Race condition in the ptrace and utrace support in the Linux kernel 2.6.9 through 2.6.25, as used in Red Hat Enterprise Linux (RHEL) 4, allows local users to cause a denial of service (oops) via a long series of PTRACE_ATTACH ptrace calls to another user's process that trigger a conflict between utrace_detach and report_quiescent, related to "late ptrace_may_attach() check" and "race around &dead_engine_ops setting," a different vulnerability than CVE-2007-0771 and CVE-2008-1514. NOTE: this issue might only affect kernel versions before 2.6.16.x. |
| CVE-2008-2333 | Cross-site scripting (XSS) vulnerability in ldap_test.cgi in Barracuda Spam Firewall (BSF) before 3.5.11.025 allows remote attackers to inject arbitrary web script or HTML via the email parameter. |
| CVE-2008-2267 | Incomplete blacklist vulnerability in javaUpload.php in Postlet in the FileManager module in CMS Made Simple 1.2.4 and earlier allows remote attackers to execute arbitrary code by uploading a file with a name ending in (1) .jsp, (2) .php3, (3) .cgi, (4) .dhtml, (5) .phtml, (6) .php5, or (7) .jar, then accessing it via a direct request to the file in modules/FileManager/postlet/. |
| CVE-2008-2236 | Cross-site scripting (XSS) vulnerability in blosxom.cgi in Blosxom before 2.1.2 allows remote attackers to inject arbitrary web script or HTML via the flav parameter (flavour variable). NOTE: some of these details are obtained from third party information. |
| CVE-2008-2050 | Stack-based buffer overflow in the FastCGI SAPI (fastcgi.c) in PHP before 5.2.6 has unknown impact and attack vectors. |
| CVE-2008-1960 | Cross-site scripting (XSS) vulnerability in cgi-bin/contray/search.cgi in ContRay 3.x allows remote attackers to inject arbitrary web script or HTML via the search parameter. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2008-1891 | Directory traversal vulnerability in WEBrick in Ruby 1.8.4 and earlier, 1.8.5 before 1.8.5-p231, 1.8.6 before 1.8.6-p230, 1.8.7 before 1.8.7-p22, and 1.9.0 before 1.9.0-2, when using NTFS or FAT filesystems, allows remote attackers to read arbitrary CGI files via a trailing (1) + (plus), (2) %2b (encoded plus), (3) . (dot), (4) %2e (encoded dot), or (5) %20 (encoded space) character in the URI, possibly related to the WEBrick::HTTPServlet::FileHandler and WEBrick::HTTPServer.new functionality and the :DocumentRoot option. |
| CVE-2008-1793 | Multiple cross-site scripting (XSS) vulnerabilities in view.cgi in Smart Classified ADS Professional, Smart Photo ADS, and Smart Photo ADS Gold allow remote attackers to inject arbitrary web script or HTML via the (1) AdNum and (2) Department parameters. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2008-1541 | Directory traversal vulnerability in cgi-bin/his-webshop.pl in HIS Webshop 2.50 allows remote attackers to read arbitrary files via a .. (dot dot) in the t parameter. |
| CVE-2008-1468 | Cross-site scripting (XSS) vulnerability in namazu.cgi in Namazu before 2.0.18 allows remote attackers to inject arbitrary web script or HTML via UTF-7 encoded input, related to failure to set the charset, a different vector than CVE-2004-1318 and CVE-2001-1350. NOTE: some of these details are obtained from third party information. |
| CVE-2008-1366 | Trend Micro OfficeScan Corporate Edition 8.0 Patch 2 build 1189 and earlier, and 7.3 Patch 3 build 1314 and earlier, allows remote attackers to cause a denial of service (process consumption) via (1) an HTTP request without a Content-Length header or (2) invalid characters in unspecified CGI arguments, which triggers a NULL pointer dereference. |
| CVE-2008-1360 | Cross-site scripting (XSS) vulnerability in Nagios before 2.11 allows remote attackers to inject arbitrary web script or HTML via unknown vectors to unspecified CGI scripts, a different issue than CVE-2007-5624. |
| CVE-2008-1334 | cgi/b on the BT Home Hub router allows remote attackers to bypass authentication, and read or modify administrative settings or make arbitrary VoIP telephone calls, by placing a character at the end of the PATH_INFO, as demonstrated by (1) %5C (encoded backslash), (2) '%' (percent), and (3) '~' (tilde). NOTE: the '/' (slash) vector is already covered by CVE-2007-5383. |
| CVE-2008-1331 | cgi-data/FastJSData.cgi in OmniPCX Office with Internet Access services OXO210 before 210/091.001, OXO600 before 610/014.001, and other versions, allows remote attackers to execute arbitrary commands and "obtain OXO resources" via shell metacharacters in the id2 parameter. |
| CVE-2008-1269 | cp06_wifi_m_nocifr.cgi in the admin panel on the Alice Gate 2 Plus Wi-Fi router does not verify authentication credentials, which allows remote attackers to disable Wi-Fi encryption via a certain request. |
| CVE-2008-1253 | Cross-site scripting (XSS) vulnerability in cgi-bin/webcm on the D-Link DSL-G604T router allows remote attackers to inject arbitrary web script or HTML via the var:category parameter, as demonstrated by a request for advanced/portforw.htm on the fwan page. |
| CVE-2008-1245 | cgi-bin/setup_virtualserver.exe on the Belkin F5D7230-4 router with firmware 9.01.10 allows remote attackers to cause a denial of service (control center outage) via an HTTP request with invalid POST data and a "Connection: Keep-Alive" header. |
| CVE-2008-1244 | cgi-bin/setup_dns.exe on the Belkin F5D7230-4 router with firmware 9.01.10 does not require authentication, which allows remote attackers to perform administrative actions, as demonstrated by changing a DNS server via the dns1_1, dns1_2, dns1_3, and dns1_4 parameters. NOTE: it was later reported that F5D7632-4V6 with firmware 6.01.08 is also affected. |
| CVE-2008-1181 | Juniper Networks Secure Access 2000 5.5 R1 (build 11711) allows remote attackers to obtain sensitive information via a direct request for remediate.cgi without certain parameters, which reveals the path in an "Execute failed" error message. |
| CVE-2008-1180 | Cross-site scripting (XSS) vulnerability in dana-na/auth/rdremediate.cgi in Juniper Networks Secure Access 2000 5.5 R1 build 11711 allows remote attackers to inject arbitrary web script or HTML via the delivery_mode parameter. |
| CVE-2008-1111 | mod_cgi in lighttpd 1.4.18 sends the source code of CGI scripts instead of a 500 error when a fork failure occurs, which might allow remote attackers to obtain sensitive information. |
| CVE-2008-1094 | SQL injection vulnerability in index.cgi in the Account View page in Barracuda Spam Firewall (BSF) before 3.5.12.007 allows remote authenticated administrators to execute arbitrary SQL commands via a pattern_x parameter in a search_count_equals action, as demonstrated by the pattern_0 parameter. |
| CVE-2008-1054 | Stack-based buffer overflow in the _lib_spawn_user_getpid function in (1) swatch.exe and (2) surgemail.exe in NetWin SurgeMail 38k4 and earlier, and beta 39a, allows remote attackers to cause a denial of service (daemon crash) and possibly execute arbitrary code via an HTTP request with multiple long headers to webmail.exe and unspecified other CGI executables, which triggers an overflow when assigning values to environment variables. NOTE: some of these details are obtained from third party information. |
| CVE-2008-0971 | Multiple cross-site scripting (XSS) vulnerabilities in index.cgi in Barracuda Spam Firewall (BSF) before 3.5.12.007, Message Archiver before 1.2.1.002, Web Filter before 3.3.0.052, IM Firewall before 3.1.01.017, and Load Balancer before 2.3.024 allow remote attackers to inject arbitrary web script or HTML via (1) the Policy Name field in Search Based Retention Policy in Message Archiver; unspecified parameters in the (2) IP Configuration, (3) Administration, (4) Journal Accounts, (5) Retention Policy, and (6) GroupWise Sync components in Message Archiver; (7) input to search operations in Web Filter; and (8) input used in error messages and (9) hidden INPUT elements in (a) Spam Firewall, (b) IM Firewall, and (c) Web Filter. |
| CVE-2008-0917 | Cross-site scripting (XSS) vulnerability in Tor World Tor Search 1.1 and earlier, I-Navigator 4.0, Mobile Frontier 2.1 and earlier, Diary.cgi (aka Quotes of the Day) 1.5 and earlier, Tor News 1.21 and earlier, Simple BBS 1.3 and earlier, Interactive BBS 1.3 and earlier, Tor Board 1.1 and earlier, Simple Vote 1.1 and earlier, and Com Vote 1.2 and earlier allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2008-0893 | Red Hat Administration Server, as used by Red Hat Directory Server 8.0 EL4 and EL5, does not properly restrict access to CGI scripts, which allows remote attackers to perform administrative actions. |
| CVE-2008-0892 | The replication monitor CGI script (repl-monitor-cgi.pl) in Red Hat Administration Server, as used by Red Hat Directory Server 8.0 EL4 and EL5, allows remote attackers to execute arbitrary commands. |
| CVE-2008-0774 | Cross-site scripting (XSS) vulnerability in search.cgi in Loris Hotel Reservation System 3.01 and possibly earlier allows remote attackers to inject arbitrary web script or HTML via the hotel_name parameter. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2008-0720 | Cross-site scripting (XSS) vulnerability in Webmin 1.370 and 1.390 and Usermin 1.300 and 1.320 allows remote attackers to inject arbitrary web script or HTML via the search parameter to webmin_search.cgi (aka the search section), and possibly other components accessed through a "search box" or "open file box." NOTE: some of these details are obtained from third party information. |
| CVE-2008-0717 | Cross-site scripting (XSS) vulnerability in Caching Proxy (CP) 5.1 through 6.1 in IBM WebSphere Edge Server, when CGI mapping rules are enabled, allows remote attackers to inject arbitrary web script or HTML via unspecified vectors that trigger injection into an error response. |
| CVE-2008-0669 | Cross-site scripting (XSS) vulnerability in search.cgi in Sift Unity allows remote attackers to inject arbitrary web script or HTML via the qt parameter. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2008-0666 | Website META Language (WML) 2.0.11 allows local users to overwrite arbitrary files via a symlink attack on (1) the /tmp/pe.tmp.$$ temporary file used by wml_contrib/wmg.cgi and (2) temporary files used by wml_backend/p3_eperl/eperl_sys.c. |
| CVE-2008-0658 | slapd/back-bdb/modrdn.c in the BDB backend for slapd in OpenLDAP 2.3.39 allows remote authenticated users to cause a denial of service (daemon crash) via a modrdn operation with a NOOP (LDAP_X_NO_OPERATION) control, a related issue to CVE-2007-6698. |
| CVE-2008-0599 | The init_request_info function in sapi/cgi/cgi_main.c in PHP before 5.2.6 does not properly consider operator precedence when calculating the length of PATH_TRANSLATED, which might allow remote attackers to execute arbitrary code via a crafted URI. |
| CVE-2008-0488 | Directory traversal vulnerability in tseekdir.cgi in VB Marketing allows remote attackers to include and execute arbitrary local files via directory traversal sequences in the location parameter. |
| CVE-2008-0464 | Directory traversal vulnerability in archiv.cgi in absofort aconon Mail 2007 Enterprise SQL 11.7.0 and Mail 2004 Enterprise SQL 11.5.1 allows remote attackers to read arbitrary files via a .. (dot dot) in the template parameter. |
| CVE-2008-0403 | The web server in Belkin Wireless G Plus MIMO Router F5D9230-4 does not require authentication for SaveCfgFile.cgi, which allows remote attackers to read and modify configuration via a direct request to SaveCfgFile.cgi. |
| CVE-2008-0228 | Cross-site request forgery (CSRF) vulnerability in apply.cgi in the Linksys WRT54GL Wireless-G Broadband Router with firmware 4.30.9 allows remote attackers to perform actions as administrators. |
| CVE-2008-0067 | Multiple stack-based buffer overflows in HP OpenView Network Node Manager (OV NNM) 7.01, 7.51, and 7.53 allow remote attackers to execute arbitrary code via (1) long string parameters to the OpenView5.exe CGI program; (2) a long string parameter to the OpenView5.exe CGI program, related to ov.dll; or a long string parameter to the (3) getcvdata.exe, (4) ovlaunch.exe, or (5) Toolbar.exe CGI program. |
| CVE-2008-0047 | Heap-based buffer overflow in the cgiCompileSearch function in CUPS 1.3.5, and other versions including the version bundled with Apple Mac OS X 10.5.2, when printer sharing is enabled, allows remote attackers to execute arbitrary code via crafted search expressions. |
| CVE-2007-6708 | Multiple cross-site request forgery (CSRF) vulnerabilities on the Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.01.03 and earlier firmware allow remote attackers to perform actions as administrators via an arbitrary valid request to an administrative URI, as demonstrated by (1) a Restore Factory Defaults action using the mtenRestore parameter to setup.cgi and (2) creation of a user account using the sysname parameter to setup.cgi. |
| CVE-2007-6700 | Cross-site scripting (XSS) vulnerability in cgi-bin/bgplg in the web interface for the BGPD daemon in OpenBSD 4.1 allows remote attackers to inject arbitrary web script or HTML via the cmd parameter. |
| CVE-2007-6616 | Cross-site scripting (XSS) vulnerability in simpleforum.cgi in SimpleForum 4.6.2 and earlier allows remote attackers to inject arbitrary web script or HTML via the searchkey parameter in a search action. NOTE: some of these details are obtained from third party information. |
| CVE-2007-6515 | support/dispatch.cgi in SiteScape Forum allows remote attackers to execute arbitrary TCL code via code separator characters in the query string. |
| CVE-2007-6405 | Sergey Lyubka Simple HTTPD (shttpd) 1.38 and earlier on Windows allows remote attackers to download arbitrary CGI programs or scripts via a URI with an appended (1) '+' character, (2) '.' character, (3) %2e sequence (hex-encoded dot), or (4) hex-encoded character greater than 0x7f. NOTE: the %20 vector is already covered by CVE-2007-3407. |
| CVE-2007-6204 | Multiple stack-based buffer overflows in HP OpenView Network Node Manager (OV NNM) 6.41, 7.01, and 7.51 allow remote attackers to execute arbitrary code via unspecified long arguments to (1) ovlogin.exe, (2) OpenView5.exe, (3) snmpviewer.exe, and (4) webappmon.exe, as demonstrated via a long Action parameter to OpenView5.exe. |
| CVE-2007-6176 | kb_whois.cgi in K+B-Bestellsystem (aka KB-Bestellsystem) allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) domain or (2) tld parameter in a check_owner action. |
| CVE-2007-6077 | The session fixation protection mechanism in cgi_process.rb in Rails 1.2.4, as used in Ruby on Rails, removes the :cookie_only attribute from the DEFAULT_SESSION_OPTIONS constant, which effectively causes cookie_only to be applied only to the first instantiation of CgiRequest, which allows remote attackers to conduct session fixation attacks. NOTE: this is due to an incomplete fix for CVE-2007-5380. |
| CVE-2007-6003 | Cross-site scripting (XSS) vulnerability in cgi/b/ic/connect in the Thomson SpeedTouch 716 with firmware 5.4.0.14 allows remote attackers to inject arbitrary web script or HTML via the url parameter. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2007-5993 | Cross-site scripting (XSS) vulnerability in Visionary Technology in Library Solutions (VTLS) vtls.web.gateway before 48.1.1 allows remote attackers to inject arbitrary web script or HTML via the searchtype parameter. |
| CVE-2007-5803 | Multiple cross-site scripting (XSS) vulnerabilities in CGI programs in Nagios before 2.12 might allow remote attackers to inject arbitrary web script or HTML via unspecified vectors, a different issue than CVE-2007-5624 and CVE-2008-1360. |
| CVE-2007-5735 | eFileMan 7.1.0.87-88 stores sensitive information under the web root with insufficient access control, which allows remote attackers to obtain unspecified user information via a direct request for cgi-bin/efileman/efileman_config.pm. |
| CVE-2007-5734 | Unrestricted file upload vulnerability in eFileMan 7.1.0.87-88 allows remote attackers to upload arbitrary files, with "uploads/upload_file." destination filenames, via unspecified vectors to upload.cgi, accessed from upload.html. |
| CVE-2007-5708 | slapo-pcache (overlays/pcache.c) in slapd in OpenLDAP before 2.3.39, when running as a proxy-caching server, allocates memory using a malloc variant instead of calloc, which prevents an array from being initialized properly and might allow attackers to cause a denial of service (segmentation fault) via unknown vectors that prevent the array from being null terminated. |
| CVE-2007-5707 | OpenLDAP before 2.3.39 allows remote attackers to cause a denial of service (slapd crash) via an LDAP request with a malformed objectClasses attribute. NOTE: this has been reported as a double free, but the reports are inconsistent. |
| CVE-2007-5673 | Cross-site scripting (XSS) vulnerability in cgi-bin/webif.exe in ifnet WebIf allows remote attackers to inject arbitrary web script or HTML via the cmd parameter. |
| CVE-2007-5624 | Cross-site scripting (XSS) vulnerability in Nagios 2.x before 2.10 allows remote attackers to inject arbitrary web script or HTML via unknown vectors to unspecified CGI scripts. |
| CVE-2007-5588 | Cross-site scripting (XSS) vulnerability in mnoGoSearch before 3.2.43 allows remote attackers to inject arbitrary web script or HTML via the t parameter in search.cgi, as reachable from search.htm-dist. |
| CVE-2007-5562 | Cross-site scripting (XSS) vulnerability in cgi-bin/welcome (aka the login page) in Netgear SSL312 PROSAFE SSL VPN-Concentrator 25 allows remote attackers to inject arbitrary web script or HTML via the err parameter in the context of an error page. |
| CVE-2007-5433 | Multiple cross-site scripting (XSS) vulnerabilities in index.cgi in Site-Up 2.64 and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) search or (2) search mask field. |
| CVE-2007-5383 | The Thomson/Alcatel SpeedTouch 7G router, as used for the BT Home Hub 6.2.6.B and earlier, allows remote attackers on an intranet to bypass authentication and gain administrative access via vectors including a '/' (slash) character at the end of the PATH_INFO to cgi/b, aka "double-slash auth bypass." NOTE: remote attackers outside the intranet can exploit this by leveraging a separate CSRF vulnerability. NOTE: SpeedTouch 780 might also be affected by some of these issues. |
| CVE-2007-5370 | Multiple cross-site scripting (XSS) vulnerabilities in cgi-bin/dnewsweb.exe in NetWin DNewsWeb (DNews News Server) 57e1 allow remote attackers to inject arbitrary web script or HTML via the (1) group or (2) utag parameter. |
| CVE-2007-5113 | report.cgi in Google Urchin allows remote attackers to bypass authentication and obtain sensitive information (web server logs) via certain modified query parameters, as demonstrated using the profile, rid, prefs, n, vid, bd, ed, dt, and gtype parameters, a different vulnerability than CVE-2007-5112. |
| CVE-2007-5112 | Cross-site scripting (XSS) vulnerability in session.cgi (aka the login page) in Google Urchin 5 5.7.03 and earlier allows remote attackers to inject arbitrary web script or HTML via the query string, a different vulnerability than CVE-2007-4713. NOTE: this can be leveraged to capture login credentials in some browsers that support remembered (auto-completed) passwords. |
| CVE-2007-5088 | Cross-site scripting (XSS) vulnerability in search/cust_bill_event.cgi in Freeside 1.7.2 allows remote attackers to inject arbitrary web script or HTML via the failed parameter. |
| CVE-2007-5036 | Multiple buffer overflows in the AirDefense Airsensor M520 with firmware 4.3.1.1 and 4.4.1.4 allow remote authenticated users to cause a denial of service (HTTPS service outage) via a crafted query string in an HTTPS request to (1) adLog.cgi, (2) post.cgi, or (3) ad.cgi, related to the "files filter." |
| CVE-2007-5027 | Multiple cross-site scripting (XSS) vulnerabilities in cgi-bin/ddns in the web management panel for the WBR3404TX broadband router with firmware R1.94p0vTIG allow remote attackers to inject arbitrary web script or HTML via the (1) DD or (2) DU parameter. |
| CVE-2007-4930 | Multiple cross-site request forgery (CSRF) vulnerabilities in the AXIS 207W camera allow remote attackers to perform certain actions as administrators via (1) axis-cgi/admin/restart.cgi, (2) the user and sgrp parameters to axis-cgi/admin/pwdgrp.cgi in an add action, or (3) the server parameter to admin/restartMessage.shtml. |
| CVE-2007-4927 | axis-cgi/buffer/command.cgi on the AXIS 207W camera allows remote authenticated users to cause a denial of service (reboot) via many requests with unique buffer names in the buffername parameter in a start action. |
| CVE-2007-4822 | Cross-site request forgery (CSRF) vulnerability in the device management interface in Buffalo AirStation WHR-G54S 1.20 allows remote attackers to make configuration changes as an administrator via HTTP requests to certain HTML pages in the res parameter with an inp req parameter to cgi-bin/cgi, as demonstrated by accessing (1) ap.html and (2) filter_ip.html. |
| CVE-2007-4727 | Buffer overflow in the fcgi_env_add function in mod_proxy_backend_fastcgi.c in the mod_fastcgi extension in lighttpd before 1.4.18 allows remote attackers to overwrite arbitrary CGI variables and execute arbitrary code via an HTTP request with a long content length, as demonstrated by overwriting the SCRIPT_FILENAME variable, aka a "header overflow." |
| CVE-2007-4713 | Multiple cross-site scripting (XSS) vulnerabilities in urchin.cgi in Urchin 5.6.00r2 allow remote attackers to inject arbitrary web script or HTML via the (1) dtc, (2) vid, (3) n, (4) dt, (5) ed, and (6) bd parameters. |
| CVE-2007-4655 | Multiple directory traversal vulnerabilities in CGI RESCUE Shopping Basket Professional 7.51 and earlier allow remote attackers to list arbitrary directories, and possibly read arbitrary files, via directory traversal sequences in unspecified parameters to (1) list.cgi or (2) list2.cgi. |
| CVE-2007-4647 | newswire/uploadmedia.cgi in 2coolcode Our Space (Ourspace) 2.0.9 allows remote attackers to upload certain files via unspecified vectors, probably involving unrestricted functionality in uploadmedia.cgi. |
| CVE-2007-4543 | Cross-site scripting (XSS) vulnerability in enter_bug.cgi in Bugzilla 2.17.1 through 2.20.4, 2.22.x before 2.22.3, and 3.x before 3.0.1 allows remote attackers to inject arbitrary web script or HTML via the buildid field in the "guided form." |
| CVE-2007-4542 | Multiple cross-site scripting (XSS) vulnerabilities in MapServer before 4.10.3 allow remote attackers to inject arbitrary web script or HTML via unspecified vectors involving the (1) processLine function in maptemplate.c and the (2) writeError function in mapserv.c in the mapserv CGI program. |
| CVE-2007-4256 | Directory traversal vulnerability in showpage.cgi in YNP Portal System 2.2.0 allows remote attackers to read arbitrary files via a .. (dot dot) in the p parameter. |
| CVE-2007-4146 | Cross-site scripting (XSS) vulnerability in webevent.cgi in WebEvent 2.61 through 4.03 allows remote attackers to inject arbitrary web script or HTML via the cmd parameter. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2007-4043 | file.cgi in Secure Computing SecurityReporter (aka Network Security Analyzer) before 4.6.3 allows remote attackers to bypass authentication via a name parameter ending with a "%00.gif" sequence. NOTE: a separate traversal vulnerability could be leveraged to download arbitrary files. |
| CVE-2007-4023 | Cross-site scripting (XSS) vulnerability in the login CGI program in Aruba Mobility Controller 2.5.4.18 and earlier, and 2.4.8.6-FIPS and earlier FIPS versions, allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2007-3986 | file.cgi in Secure Computing SecurityReporter (aka Network Security Analyzer) 4.6.3 allows remote attackers to bypass authentication via a name parameter that specifies the eventcache directory and a non-GIF file, which causes the $dontvalidate variable to be set to true. NOTE: a separate traversal vulnerability could be leveraged to download arbitrary files. |
| CVE-2007-3985 | Directory traversal vulnerability in file.cgi in Secure Computing SecurityReporter (aka Network Security Analyzer) 4.6.3 allows remote attackers to download arbitrary files via a .. (dot dot) in the name parameter. |
| CVE-2007-3702 | Directory traversal vulnerability in the load function in cgi-bin/mail/mailmachine.cgi in Mail Machine 3.989 and earlier allows remote attackers to read arbitrary files via a .. (dot dot) in the archives parameter in a Load action. |
| CVE-2007-3692 | Directory traversal vulnerability in download.cgi in EZFactory KDDI Download CGI 1.x allows remote attackers to read and download arbitrary files via a .. (dot dot) in the name parameter. |
| CVE-2007-3574 | Multiple cross-site scripting (XSS) vulnerabilities in setup.cgi on the Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.00.06 firmware allow remote attackers to inject arbitrary web script or HTML via the (1) c4_trap_ip_, (2) devname, (3) snmp_getcomm, or (4) snmp_setcomm parameter. |
| CVE-2007-3572 | Incomplete blacklist vulnerability in cgi-bin/runDiagnostics.cgi in the web interface on the Yoggie Pico and Pico Pro allows remote attackers to execute arbitrary commands via shell metacharacters in the param parameter, as demonstrated by URL encoded "`" (backtick) characters (%60 sequences). |
| CVE-2007-3454 | Stack-based buffer overflow in CGIOCommon.dll before 8.0.0.1042 in Trend Micro OfficeScan Corporate Edition 8.0 allows remote attackers to execute arbitrary code via long crafted requests, as demonstrated using a long session cookie to unspecified CGI programs that use this library. |
| CVE-2007-3424 | The moveim function in cgi-bin/cgi-lib/instantmessage.pl in web-app.org WebAPP before 0.9.9.7 uses the tocat parameter as a subdirectory name when moving an instant message, which has unknown impact and remote attack vectors. |
| CVE-2007-3423 | cgi-bin/cgi-lib/instantmessage.pl in web-app.org WebAPP before 0.9.9.7 uses the From field of an instant message as the beginning of the .dat file name when the (1) imview2 or (2) imview3 function reads (a) an internal IM, or a message from a (b) guest or (c) removed member, which has unknown impact and remote attack vectors. |
| CVE-2007-3422 | The getcgi function in cgi-bin/cgi-lib/subs.pl in web-app.org WebAPP before 0.9.9.7 attempts to parse query strings that contain (1) non-printing characters, (2) certain printing characters that do not commonly occur in URLs, or (3) invalid URL encoding sequences, which has unknown impact and remote attack vectors. |
| CVE-2007-3420 | The Random Cookie Password functionality in the loaduser function in cgi-bin/cgi-lib/subs.pl in web-app.org WebAPP before 0.9.9.7 does not clear the (1) username, (2) password, (3) usertheme, and (4) userlang cookies for unauthorized users, which has unknown impact and remote attack vectors. |
| CVE-2007-3419 | The editprofile3 function in cgi-bin/cgi-lib/user.pl in web-app.org WebAPP before 0.9.9.7 does not properly check the (1) themes.dat, (2) languages.dat, (3) profession.dat, (4) gen.dat, (5) marstat.dat, (6) states.dat, and (7) ages.dat files before saving profile settings of members, which has unknown impact and remote attack vectors. |
| CVE-2007-3418 | The displaypost function in cgi-bin/cgi-lib/forum_display.pl in web-app.org WebAPP before 0.9.9.7 does not display usernames in conjunction with real names, which makes it easier for remote authenticated users to impersonate other users. |
| CVE-2007-3417 | Multiple cross-site scripting (XSS) vulnerabilities in cgi-bin/cgi-lib/search.pl in web-app.org WebAPP before 0.9.9.7 allow remote attackers to inject arbitrary web script or HTML via a search string, which is not sanitized when an HREF attribute is printed by the (1) process_search or (2) show_recent_searches function. |
| CVE-2007-3368 | Buffer overflow in the HTTP server on the Polycom SoundPoint IP 601 SIP phone with BootROM 3.0.x+ allows remote attackers to cause a denial of service (device reboot) via a malformed CGI parameter. |
| CVE-2007-3367 | Simple CGI Wrapper (scgiwrap) in cPanel before 10.9.1, and 11.x before 11.4.19-R14378, allows remote attackers to obtain sensitive information via a direct request, which reveals the path in an error message. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2007-3366 | Cross-site scripting (XSS) vulnerability in Simple CGI Wrapper (scgiwrap) in cPanel before 10.9.1, and 11.x before 11.4.19-R14378, allows remote attackers to inject arbitrary web script or HTML via the URI. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2007-3364 | Cross-site scripting (XSS) vulnerability in the cgi-bin/post.mscgi sample page in MyServer 0.8.9 allows remote attackers to inject arbitrary web script or HTML via the body content. |
| CVE-2007-3266 | Directory traversal vulnerability in webif.cgi in ifnet WEBIF allows remote attackers to include and execute arbitrary local files a .. (dot dot) in the outconfig parameter. |
| CVE-2007-3213 | Multiple cross-site scripting (XSS) vulnerabilities in comments.cgi in Sporum Forum 3.0.9 and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) view and (2) mode parameters. |
| CVE-2007-3156 | Multiple cross-site scripting (XSS) vulnerabilities in pam_login.cgi in Webmin before 1.350 and Usermin before 1.280 allow remote attackers to inject arbitrary web script or HTML via the (1) cid, (2) message, or (3) question parameter. NOTE: some of these details are obtained from third party information. |
| CVE-2007-3011 | The DBAsciiAccess CGI Script in the web interface in Fujitsu-Siemens Computers ServerView before 4.50.09 allows remote attackers to execute arbitrary commands via shell metacharacters in the Servername subparameter of the ParameterList parameter. |
| CVE-2007-2997 | ** DISPUTED ** Multiple SQL injection vulnerabilities in cgi-bin/reorder2.asp in SalesCart Shopping Cart allow remote attackers to execute arbitrary SQL commands via the password field and other unspecified vectors. NOTE: the vendor disputes this issue, stating "We were able to reproduce this sql injection on an old out-of-date demo on the website but not on the released product." |
| CVE-2007-2970 | Multiple cross-site scripting (XSS) vulnerabilities in cgi/block.cgi in 8e6 R3000 Internet Filter allow remote attackers to inject arbitrary web script or HTML via the (1) URL, (2) CAT, and (3) USER parameters. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2007-2649 | Deutsche Telekom (T-com) Speedport W 700v uses JavaScript delays for invalid authentication attempts to the CGI script, which allows remote attackers to bypass the delays and conduct brute-force attacks via direct calls to the authentication CGI script. |
| CVE-2007-2355 | The get_url function in DODS_Dispatch.pm for the CGI_server in OPeNDAP 3 allows remote attackers to execute arbitrary commands via shell metacharacters in a URL. |
| CVE-2007-2233 | cosign-bin/cosign.cgi in Cosign 2.0.2 and earlier allows remote authenticated users to perform unauthorized actions as an arbitrary user by using CR (\r) sequences in the service parameter to inject LOGIN and REGISTER commands with the desired username. |
| CVE-2007-2085 | Cross-site scripting (XSS) vulnerability in oe2edit.cgi in oe2edit CMS allows remote attackers to inject arbitrary web script or HTML via the q parameter. |
| CVE-2007-1733 | Buffer overflow in InterVations NaviCOPA HTTP Server 2.01 allows remote attackers to execute arbitrary code via a long (1) /cgi-bin/ or (2) /cgi/ pathname in an HTTP GET request, probably a different issue than CVE-2006-5112. |
| CVE-2007-1588 | server.cpp in MyServer 0.8.5 calls Process::setuid before calling Process::setgid and thus does not properly drop privileges, which might allow remote attackers to execute CGI programs with unintended privileges. |
| CVE-2007-1303 | Directory traversal vulnerability in rb.cgi in RRDBrowse 1.6 and earlier allows remote attackers to read arbitrary files via a .. (dot dot) in the file parameter. |
| CVE-2007-1276 | Multiple cross-site scripting (XSS) vulnerabilities in chooser.cgi in Webmin before 1.330 and Usermin before 1.260 allow remote attackers to inject arbitrary web script or HTML via a crafted filename. |
| CVE-2007-1001 | Multiple integer overflows in the (1) createwbmp and (2) readwbmp functions in wbmp.c in the GD library (libgd) in PHP 4.0.0 through 4.4.6 and 5.0.0 through 5.2.1 allow context-dependent attackers to execute arbitrary code via Wireless Bitmap (WBMP) images with large width or height values. |
| CVE-2007-0883 | Directory traversal vulnerability in portalgroups/portalgroups/getfile.cgi in IP3 NetAccess before firmware 4.1.9.6 allows remote attackers to read arbitrary files via a .. (dot dot) in the filename parameter. |
| CVE-2007-0669 | Unspecified vulnerability in Twiki 4.0.0 through 4.1.0 allows local users to execute arbitrary Perl code via unknown vectors related to CGI session files. |
| CVE-2007-0565 | CGI-Rescue Shopping Basket Professional 7.50 and earlier allows remote attackers to inject arbitrary operating system commands via unspecified vectors. |
| CVE-2007-0547 | Cross-site scripting (XSS) vulnerability in CGI-RESCUE WebFORM 4.3 and earlier allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| CVE-2007-0482 | cgi-bin/main in Sun Ray Server Software 2.0 and 3.0 before 20070123 allows local users to obtain the utadmin password by reading a web server's log file, or by conducting a different, unspecified local attack. |
| CVE-2007-0246 | plugins/scmcvs/www/cvsweb.php in the CVSWeb CGI in GForge 4.5.16 before 20070524, aka gforge-plugin-scmcvs, allows remote attackers to execute arbitrary commands via shell metacharacters in the PATH_INFO. |
| CVE-2007-0119 | Multiple cross-site scripting (XSS) vulnerabilities in EditTag 1.2 allow remote attackers to inject arbitrary web script or HTML via the plain parameter to (1) mkpw_mp.cgi, (2) mkpw.pl, or (3) mkpw.cgi. |
| CVE-2007-0118 | Multiple absolute path traversal vulnerabilities in EditTag 1.2 allow remote attackers to read arbitrary files via an absolute pathname in the file parameter to (1) edittag.cgi, (2) edittag.pl, (3) edittag_mp.cgi, or (4) edittag_mp.pl. |
| CVE-2006-7190 | Cross-site scripting (XSS) vulnerability in cgi-bin/user-lib/topics.pl in web-app.net WebAPP before 20060515 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors in the viewnews function, related to use of doubbctopic instead of doubbc. |
| CVE-2006-7189 | Cross-site scripting (XSS) vulnerability in cgi-bin/admin/logs.cgi in web-app.net WebAPP before 20060403 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors related to the Statistics Log Viewer. |
| CVE-2006-7188 | The search function in cgi-lib/user-lib/search.pl in web-app.net WebAPP before 20060909 allows remote attackers to read internal forum posts via certain requests, possibly related to the $info{'forum'} variable. |
| CVE-2006-7187 | Cross-site scripting (XSS) vulnerability in the show_recent_searches function in cgi-lib/user-lib/search.pl in web-app.net WebAPP before 20060909 allows remote attackers to inject arbitrary web script or HTML via the srch variable. |
| CVE-2006-7186 | cgi-lib/subs.pl in web-app.net WebAPP before 0.9.9.3.5 allows attackers to open list files in "profile and other functions," a different vulnerability than CVE-2005-0927. |
| CVE-2006-7111 | Unspecified vulnerability in Futomi's CGI Cafe KMail CGI 1.0.3 and earlier allows remote attackers to bypass authentication and obtain unauthorized email access via unspecified vectors. |
| CVE-2006-7098 | The Debian GNU/Linux 033_-F_NO_SETSID patch for the Apache HTTP Server 1.3.34-4 does not properly disassociate httpd from a controlling tty when httpd is started interactively, which allows local users to gain privileges to that tty via a CGI program that calls the TIOCSTI ioctl. |
| CVE-2006-7086 | The (1) dlback.php and (2) dlback.cgi scripts in Hot Links allow remote attackers to obtain sensitive information and download the database via a direct request with a modified dl parameter. |
| CVE-2006-7012 | scart.cgi in SCart 2.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the page parameter of a show_text action. |
| CVE-2006-6764 | PHP remote file inclusion vulnerability in authenticate.php in Keep It Simple Guest Book (KISGB), when executing PHP through CGI, allows remote attackers to execute arbitrary PHP code via a URL in the default_path_to_themes parameter. |
| CVE-2006-6485 | Multiple cross-site scripting (XSS) vulnerabilities in ShopSite 8.1 and earlier allow remote attackers to inject arbitrary web script or HTML via the prevlocation parameter in shopper/sc/registration.cgi and other unspecified vectors. |
| CVE-2006-6198 | Multiple cross-site scripting (XSS) vulnerabilities in cPanel WebHost Manager (WHM) 3.1.0 allow remote authenticated users to inject arbitrary web script or HTML via the (1) email parameter to (a) scripts2/dochangeemail, the (2) supporturl parameter to (b) cgi/addon_configsupport.cgi, the (3) pkg parameter to (c) scripts/editpkg, the (4) domain parameter to (d) scripts2/domts2 and (e) scripts/editzone, the (5) feature parameter to (g) scripts2/dofeaturemanager, and the (6) ndomain parameter to (h) scripts/park. |
| CVE-2006-5607 | Directory traversal vulnerability in /cgi-bin/webcm in INCA IM-204 allows remote attackers to read arbitrary files via a "/./." (modified dot dot) sequences in the getpage parameter. |
| CVE-2006-5538 | D-Link DSL-G624T firmware 3.00B01T01.YA-C.20060616 allows remote attackers to list contents of the cgi-bin directory via unspecified vectors, probably a direct request. |
| CVE-2006-5537 | Multiple cross-site scripting (XSS) vulnerabilities in cgi-bin/webcm in D-Link DSL-G624T firmware 3.00B01T01.YA-C.20060616 allow remote attackers to inject arbitrary web script or HTML via the (1) upnp:settings/state or (2) upnp:settings/connection parameters. |
| CVE-2006-5536 | Directory traversal vulnerability in cgi-bin/webcm in D-Link DSL-G624T firmware 3.00B01T01.YA-C.20060616 allows remote attackers to read arbitrary files via a .. (dot dot) in the getpage parameter. |
| CVE-2006-5467 | The cgi.rb CGI library for Ruby 1.8 allows remote attackers to cause a denial of service (infinite loop and CPU consumption) via an HTTP request with a multipart MIME body that contains an invalid boundary specifier, as demonstrated using a specifier that begins with a "-" instead of "--" and contains an inconsistent ID. |
| CVE-2006-5455 | Cross-site request forgery (CSRF) vulnerability in editversions.cgi in Bugzilla before 2.22.1 and 2.23.x before 2.23.3 allows user-assisted remote attackers to create, modify, or delete arbitrary bug reports via a crafted URL. |
| CVE-2006-5454 | Bugzilla 2.18.x before 2.18.6, 2.20.x before 2.20.3, 2.22.x before 2.22.1, and 2.23.x before 2.23.3 allow remote attackers to obtain (1) the description of arbitrary attachments by viewing the attachment in "diff" mode in attachment.cgi, and (2) the deadline field by viewing the XML format of the bug in show_bug.cgi. |
| CVE-2006-5453 | Multiple cross-site scripting (XSS) vulnerabilities in Bugzilla 2.18.x before 2.18.6, 2.20.x before 2.20.3, 2.22.x before 2.22.1, and 2.23.x before 2.23.3 allow remote authenticated users to inject arbitrary web script or HTML via (1) page headers using the H1, H2, and H3 HTML tags in global/header.html.tmpl, (2) description fields of certain items in various edit cgi scripts, and (3) the id parameter in showdependencygraph.cgi. |
| CVE-2006-5212 | Trend Micro OfficeScan 6.0 in Client/Server/Messaging (CSM) Suite for SMB 2.0 before 6.0.0.1385, and OfficeScan Corporate Edition (OSCE) 6.5 before 6.5.0.1418, 7.0 before 7.0.0.1257, and 7.3 before 7.3.0.1053 allow remote attackers to delete files via a modified filename parameter in a certain HTTP request that invokes the OfficeScan CGI program. |
| CVE-2006-5211 | Trend Micro OfficeScan 6.0 in Client/Server/Messaging (CSM) Suite for SMB 2.0 before 6.0.0.1385, and OfficeScan Corporate Edition (OSCE) 6.5 before 6.5.0.1418, 7.0 before 7.0.0.1257, and 7.3 before 7.3.0.1053 allow remote attackers to remove OfficeScan clients via a certain HTTP request that invokes the OfficeScan CGI program. |
| CVE-2006-5035 | Multiple cross-site scripting (XSS) vulnerabilities in Paul Smith Computer Services vCAP 1.7.0 allow remote attackers to inject arbitrary web script or HTML via (1) the statusmsg parameter in RegisterPage.cgi or (2) a URI corresponding to a nonexistent file. NOTE: the provenance of this information is unknown; the details are obtained from third party information. |
| CVE-2006-5033 | Unspecified vulnerability in StoresAndCalendarsList.cgi in Paul Smith Computer Services vCAP 1.9.0 Beta and earlier allows remote attackers to cause a denial of service via the session parameter, possibly related to format string specifiers or malformed URL encoding. |
| CVE-2006-5018 | ContentKeeper 123.25 and earlier places passwords in cleartext in an INPUT element in cgi-bin/ck/changepw.cgi, which allows remote authenticated users to obtain passwords via this URI. |
| CVE-2006-4959 | Sun Secure Global Desktop (SSGD, aka Tarantella) before 4.3 allows remote attackers to obtain sensitive information, including hostnames, versions, and settings details, via unspecified vectors, possibly involving (1) taarchives.cgi, (2) ttaAuthentication.jsp, (3) ttalicense.cgi, (4) ttawlogin.cgi, (5) ttawebtop.cgi, (6) ttaabout.cgi, or (7) test-cgi. NOTE: This information is based upon a vague initial disclosure. Details will be updated as they become available. |
| CVE-2006-4958 | Multiple cross-site scripting (XSS) vulnerabilities in Sun Secure Global Desktop (SSGD, aka Tarantella) before 4.20.983 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, possibly involving (1) taarchives.cgi, (2) ttaAuthentication.jsp, (3) ttalicense.cgi, (4) ttawlogin.cgi, (5) ttawebtop.cgi, (6) ttaabout.cgi, or (7) test-cgi. NOTE: This information is based upon a vague initial disclosure. Details will be updated as they become available. |
| CVE-2006-4812 | Integer overflow in PHP 5 up to 5.1.6 and 4 before 4.3.0 allows remote attackers to execute arbitrary code via an argument to the unserialize PHP function with a large value for the number of array elements, which triggers the overflow in the Zend Engine ecalloc function (Zend/zend_alloc.c). |
| CVE-2006-4542 | Webmin before 1.296 and Usermin before 1.226 do not properly handle a URL with a null ("%00") character, which allows remote attackers to conduct cross-site scripting (XSS), read CGI program source code, list directories, and possibly execute programs. |
| CVE-2006-4344 | CRLF injection vulnerability in CGI-Rescue Mail F/W System (formd) before 8.3 allows remote attackers to spoof e-mails and inject e-mail headers via unspecified vectors in (1) mail.cgi and (2) query.cgi. |
| CVE-2006-4246 | Usermin before 1.220 (20060629) allows remote attackers to read arbitrary files, possibly related to chfn/save.cgi not properly handling an empty shell parameter, which results in changing root's shell instead of the shell of a specified user. |
| CVE-2006-4110 | Apache 2.2.2, when running on Windows, allows remote attackers to read source code of CGI programs via a request that contains uppercase (or alternate case) characters that bypass the case-sensitive ScriptAlias directive, but allow access to the file on case-insensitive file systems. |
| CVE-2006-4104 | Cross-site scripting (XSS) vulnerability in admin.cgi in mojoscripts.com mojoGallery allows remote attackers to inject arbitrary web script or HTML via "password input." |
| CVE-2006-4087 | Cross-site scripting (XSS) vulnerability in admin.cgi in mojoscripts.com mojoGallery allows remote attackers to inject arbitrary web script or HTML via the username parameter. NOTE: the provenance of this information is unknown; the details are obtained from third party information. |
| CVE-2006-4081 | preview_email.cgi in Barracuda Spam Firewall (BSF) 3.3.01.001 through 3.3.03.053 allows remote attackers to execute commands via shell metacharacters ("|" pipe symbol) in the file parameter. NOTE: the attack can be extended to arbitrary commands by the presence of CVE-2006-4000. |
| CVE-2006-4000 | Directory traversal vulnerability in cgi-bin/preview_email.cgi in Barracuda Spam Firewall (BSF) 3.3.01.001 through 3.3.03.053 allows remote authenticated users to read arbitrary files via a .. (dot dot) in the file parameter. |
| CVE-2006-3974 | Cross-site scripting (XSS) vulnerability in cgi-bin/admin in 3Com OfficeConnect Secure Router with firmware 1.04-168 allows remote attackers to inject arbitrary web script or HTML via the tk parameter. |
| CVE-2006-3848 | Cross-site scripting (XSS) vulnerability in CGI wrapper for IP Calculator (IPCalc) 0.40 allows remote attackers to inject arbitrary web script or HTML via the URI (REQUEST_URI environment variable), which is used in the actionurl variable. |
| CVE-2006-3377 | Cross-site scripting (XSS) vulnerability in JMB Software AutoRank PHP 3.02 and earlier, and AutoRank Pro 5.01 and earlier, allows remote attackers to inject arbitrary web script or HTML via the (1) Keyword parameter in search.php and the (2) Username parameter in main.cgi. |
| CVE-2006-3328 | new_ticket.cgi in Hostflow 2.2.1-15 allows remote attackers to steal and replay authentication credentials via an IMG tag in the desc parameter ("Ticket Description" field) that points to a URL that captures referer URLs, possibly due to a cross-site scripting (XSS) vulnerability or a leak of credentials in referer URLs. |
| CVE-2006-3264 | Cross-site scripting (XSS) vulnerability in mclient.cgi in Namo DeepSearch 4.5 allows remote attackers to inject arbitrary web script or HTML via the p parameter. |
| CVE-2006-3207 | Directory traversal vulnerability in newpost.php in Ultimate PHP Board (UPB) 1.9.6 and earlier allows remote attackers to overwrite arbitrary files via a .. (dot dot) sequence and trailing null (%00) byte in the id parameter, as demonstrated by injecting a Perl CGI script using "[NR]" sequences in the message parameter, then calling close.php with modified id and t_id parameters to chmod the script. NOTE: this issue might be resultant from dynamic variable evaluation. |
| CVE-2006-3156 | Cross-site scripting (XSS) vulnerability in index.cgi in Ultimate eShop 1.0 and earlier allows remote attackers to inject arbitrary web script or HTML via the subid parameter. |
| CVE-2006-3101 | Cross-site scripting (XSS) vulnerability in LogonProxy.cgi in Cisco Secure ACS for UNIX 2.3 allows remote attackers to inject arbitrary web script or HTML via the (1) error, (2) SSL, and (3) Ok parameters. |
| CVE-2006-2991 | Multiple cross-site scripting (XSS) vulnerabilities in Ringlink 3.2 allow remote attackers to inject arbitrary web script or HTML via a JavaScript URI in the SRC attribute of an IMG element, and possibly other manipulations, in the ringid parameter in (1) next.cgi, (2) stats.cgi, or (3) list.cgi. |
| CVE-2006-2944 | Unspecified vulnerability in CGI-RESCUE FORM2MAIL 1.21 and earlier allows remote attackers to inject email headers, which facilitates sending spam messages. NOTE: the details for this issue are obtained from third party information. |
| CVE-2006-2943 | Unspecified vulnerability in CGI-RESCUE WebFORM 4.1 and earlier allows remote attackers to inject email headers, which facilitates sending spam messages. NOTE: the details for this issue are obtained from third party information. |
| CVE-2006-2814 | Multiple buffer overflows in the (1) vGetPost and (2) main functions in easy-scart.c through easy-scart6.c in iShopCart allow remote attackers to execute arbitrary code by sending a large amount of data containing "Submit" in an sslinvoice action, and allow remote attackers to have an unknown impact via a large amount of posted data. |
| CVE-2006-2813 | Directory traversal vulnerability in easy-scart.cgi in iShopCart allows remote attackers to read arbitrary files via a .. (dot dot) in the query string. |
| CVE-2006-2676 | Dispatch.cgi/_user/uservCard/ in SiteScape Forum 7.2 and possibly earlier generates different responses in a way that allows remote attackers to enumerate valid usernames. |
| CVE-2006-2489 | Integer overflow in CGI scripts in Nagios 1.x before 1.4.1 and 2.x before 2.3.1 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a content length (Content-Length) HTTP header. NOTE: this is a different vulnerability than CVE-2006-2162. |
| CVE-2006-2475 | Directory traversal vulnerability in (1) edit_mailtexte.cgi and (2) bestmail.cgi in Cosmoshop 8.11.106 and earlier allows remote administrators to read arbitrary files via ".." sequences in the file parameter. |
| CVE-2006-2474 | SQL injection vulnerability in lshop.cgi in Cosmoshop 8.11.106 and earlier allows remote attackers to execute arbitrary SQL commands via the artnum parameter. |
| CVE-2006-2231 | Multiple cross-site scripting (XSS) vulnerabilities in addguest.cgi in Big Webmaster Guestbook Script 1.02 and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) mail, (2) site, (3) city, (4) state, (5) country, and possibly (6) name fields, which are viewed via viewguest.cgi. |
| CVE-2006-2162 | Buffer overflow in CGI scripts in Nagios 1.x before 1.4 and 2.x before 2.3 allows remote attackers to execute arbitrary code via a negative content length (Content-Length) HTTP header. |
| CVE-2006-2148 | Multiple buffer overflows in client.c in CGI:IRC (CGIIRC) before 0.5.8 might allow remote attackers to execute arbitrary code via (1) cookies or (2) the query string. |
| CVE-2006-2050 | SQL injection vulnerability in dcboard.cgi in DCScripts DCForumLite 3.0 allows remote attackers to execute arbitrary SQL commands via the az parameter. |
| CVE-2006-2049 | Cross-site scripting (XSS) vulnerability in dcboard.cgi in DCScripts DCForumLite 3.0 allows remote attackers to inject arbitrary web script or HTML via the az parameter. |
| CVE-2006-2003 | Cross-site scripting (XSS) vulnerability in cgi-bin/guest in Community Architect Guestbook allows remote attackers to inject arbitrary web script or HTML by signing the guestbook, which is displayed by fsguestbook.html. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2006-1970 | Cross-site scripting (XSS) vulnerability in classifieds/viewcat.cgi in KCScripts Classifieds, distributed individually and as part of Portal Pack 6.0 and earlier, allows remote attackers to inject arbitrary web script or HTML via the cat_id parameter. |
| CVE-2006-1969 | Cross-site scripting (XSS) vulnerability in search/search.cgi in an unspecified KCScripts script, probably Search Engine or Site Search, distributed individually and as part of Portal Pack 6.0 and earlier, allows remote attackers to inject arbitrary web script or HTML via the q parameter. |
| CVE-2006-1968 | Cross-site scripting (XSS) vulnerability in news/NsVisitor.cgi in KCScripts News Publisher, distributed individually and as part of Portal Pack 6.0 and earlier, allows remote attackers to inject arbitrary web script or HTML via the sort_order parameter. |
| CVE-2006-1967 | Cross-site scripting (XSS) vulnerability in calendar/Visitor.cgi in KCScripts Calendar, distributed individually and as part of Portal Pack 6.0 and earlier, allows remote attackers to inject arbitrary web script or HTML via the sort_order parameter. |
| CVE-2006-1965 | Multiple cross-site scripting (XSS) vulnerabilities in aasi media Net Clubs Pro 4.0 and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) onuser, (2) pass, (3) chatsys, (4) room, (5) username, and (6) to parameters in (a) sendim.cgi; the (7) username parameter in (b) imessage.cgi; the (8) password parameter in (c) login.cgi; and the (9) cat_id parameter in (d) viewcat.cgi. |
| CVE-2006-1950 | Multiple cross-site scripting (XSS) vulnerabilities in banners.cgi in PerlCoders BannerFarm 2.3 and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) aff and (2) cat parameters. |
| CVE-2006-1946 | Multiple cross-site scripting (XSS) vulnerabilities in Visale 1.0 and earlier allow remote attackers to inject arbitrary web script or HTML via (1) the keyval parameter in pbpgst.cgi, (2) the catsubno parameter in pblscg.cgi, and (3) the listno parameter in pblsmb.cgi. |
| CVE-2006-1944 | Multiple cross-site scripting (XSS) vulnerabilities in SibSoft CommuniMail 1.2 and earlier allow remote attackers to inject arbitrary web script or HTML via (1) the list_id parameter in mailadmin.cgi and (2) the form_id parameter in templates.cgi. |
| CVE-2006-1943 | Multiple cross-site scripting (XSS) vulnerabilities in Smarter Scripts IntelliLink Pro 5.06 and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) url parameter in addlink_lwp.cgi and the (2) id, (3) forgotid, and (4) forgotpass parameters in edit.cgi. |
| CVE-2006-1851 | xFlow 5.46.11 and earlier allows remote attackers to determine the installation path of the application via the (1) action parameter to members_only/index.cgi and (2) page parameter customer_area/index.cgi, probably due to invalid values. |
| CVE-2006-1850 | Multiple cross-site scripting (XSS) vulnerabilities in xFlow 5.46.11 and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) level, (2) position, (3) id, and (4) action parameters to members_only/index.cgi, and the (5) page parameter to customer_area/index.cgi. |
| CVE-2006-1849 | Multiple SQL injection vulnerabilities in members_only/index.cgi in xFlow 5.46.11 and earlier allow remote attackers to execute arbitrary SQL commands via the (1) position and (2) id parameter. |
| CVE-2006-1832 | sysinfo.cgi in sysinfo 1.21 allows remote attackers to obtain the installation path via the debugger action. |
| CVE-2006-1831 | Direct static code injection vulnerability in sysinfo.cgi in sysinfo 1.21 and possibly other versions before 2.25 allows remote attackers to execute arbitrary commands via a leading ; (semicolon) in the name parameter in a systemdoc action, which is injected into phpinfo.php. |
| CVE-2006-1799 | censtore.cgi in Censtore 7.3.002 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in the page parameter. |
| CVE-2006-1795 | Cross-site scripting (XSS) vulnerability in tablepublisher.cgi in UPDI Network Enterprise @1 Table Publisher 2006-03-23 allows remote attackers to inject arbitrary web script or HTML via the Title of Table field. |
| CVE-2006-1709 | Cross-site scripting (XSS) vulnerability in shop_main.cgi in interaktiv.shop 5 allows remote attackers to inject arbitrary web script or HTML via the (1) pn and (2) sbeg parameters. |
| CVE-2006-1490 | PHP before 5.1.3-RC1 might allow remote attackers to obtain portions of memory via crafted binary data sent to a script that processes user input in the html_entity_decode function and sends the encoded results back to the client, aka a "binary safety" issue. NOTE: this issue has been referred to as a "memory leak," but it is an information leak that discloses memory contents. |
| CVE-2006-1485 | gm-upload.cgi in Greymatter 1.3.1 allows remote authenticated users with upload privileges to execute arbitrary programs by uploading files to locations within the web root. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information. |
| CVE-2006-1427 | Multiple cross-site scripting (XSS) vulnerabilities in WebAPP 0.9.9.3.2 and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) action, (2) id, (3) num, (4) board, (5) cat, (6) real, (7) viewcat, (8) img, or (9) curcatname parameter in cgi-bin/index.cgi, or (10) vsSD parameter in /mods/calendar/index.cgi. |
| CVE-2006-1404 | Multiple cross-site scripting (XSS) vulnerabilities in bol.cgi in BlankOL 1.0 and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) file or (2) function parameter. |
| CVE-2006-1395 | SQL injection vulnerability in mb.cgi in Cholod MySQL Based Message Board allows remote attackers to execute arbitrary SQL commands via unspecified vectors in a showmessage action, possibly the username parameter. NOTE: the provenance of this information is unknown; the details are obtained from third party information. |
| CVE-2006-1392 | Multiple cross-site scripting (XSS) vulnerabilities in index.cgi in the login server in University of Washington Pubcookie 3.0.0, 3.1.0, 3.1.1, 3.2 before 3.2.1b, and 3.3 before 3.3.0a allow remote attackers to inject arbitrary web script or HTML via unspecified inputs. |
| CVE-2006-1344 | Cross-site scripting (XSS) vulnerability in VeriSign haydn.exe, as used in Managed PKI (MPKI) 6.0, allows remote attackers to inject arbitrary web script or HTML via a javascript URI in the VHTML_FILE parameter. |
| CVE-2006-1280 | CGI::Session 4.03-1 does not set proper permissions on temporary files created in (1) Driver::File and (2) Driver::db_file, which allows local users to obtain privileged information, such as session keys, by viewing the files. |
| CVE-2006-1279 | CGI::Session 4.03-1 allows local users to overwrite arbitrary files via a symlink attack on temporary files used by (1) Driver::File, (2) Driver::db_file, and possibly (3) Driver::sqlite. |
| CVE-2006-1062 | Unspecified vulnerability in lurker.cgi for Lurker 2.0 and earlier allows attackers to read arbitrary files via unknown vectors. |
| CVE-2006-1044 | Multiple buffer overflows in LISTSERV 14.3 and 14.4, including LISTSERV Lite and HPO, with the web archive interface enabled, allow remote attackers to execute arbitrary code via unknown attack vectors related to the WA CGI. NOTE: technical details will be released after the grace period has ended on 20060603. |
| CVE-2006-0980 | Multiple cross-site scripting (XSS) vulnerabilities in Jay Eckles CGI Calendar 2.7 allow remote attackers to inject arbitrary web script or HTML via the year parameter in (1) index.cgi and (2) viewday.cgi. |
| CVE-2006-0915 | Bugzilla 2.16.10 does not properly handle certain characters in the (1) maxpatchsize and (2) maxattachmentsize parameters in attachment.cgi, which allows remote attackers to trigger a SQL error. |
| CVE-2006-0914 | Bugzilla 2.16.10, 2.17 through 2.18.4, and 2.20 does not properly handle certain characters in the mostfreqthreshold parameter in duplicates.cgi, which allows remote attackers to trigger a SQL error. |
| CVE-2006-0913 | SQL injection vulnerability in whineatnews.pl in Bugzilla 2.17 through 2.18.4 and 2.20 allows remote authenticated users with administrative privileges to execute arbitrary SQL commands via the whinedays parameter, as accessible from editparams.cgi. |
| CVE-2006-0795 | Absolute path traversal vulnerability in convert.cgi in Quirex 2.0.2 and earlier allows remote attackers to read arbitrary files, and possibly execute arbitrary code, via the (1) quiz_head, (2) quiz_foot, and (3) template variables. |
| CVE-2006-0767 | CGIWrap before 3.10 allows remote attackers to obtain sensitive information via unknown attack vectors that cause errors in scripts that reveal system information. |
| CVE-2006-0763 | Cross-site scripting (XSS) vulnerability in dowebmailforward.cgi in cPanel allows remote attackers to inject arbitrary web script or HTML via a URL encoded value in the fwd parameter. |
| CVE-2006-0645 | Tiny ASN.1 Library (libtasn1) before 0.2.18, as used by (1) GnuTLS 1.2.x before 1.2.10 and 1.3.x before 1.3.4, and (2) GNU Shishi, allows attackers to crash the DER decoder and possibly execute arbitrary code via "out-of-bounds access" caused by invalid input, as demonstrated by the ProtoVer SSL test suite. |
| CVE-2006-0533 | Cross-site scripting (XSS) vulnerability in webmailaging.cgi in cPanel allows remote attackers to inject arbitrary web script or HTML via the numdays parameter. |
| CVE-2006-0251 | Cross-site scripting (XSS) vulnerability in fom.cgi in Faq-O-Matic 2.711 allows remote attackers to inject arbitrary web script or HTML via the (1) _duration, (2) file, and (3) cmd parameters. |
| CVE-2006-0247 | Cross-site scripting (XSS) vulnerability in anyboard.cgi in Netbula Anyboard 9.9 and earlier allows remote attackers to inject arbitrary web script or HTML via the tK parameter in a find command. |
| CVE-2005-4858 | Multiple cross-site scripting (XSS) vulnerabilities in mimic2.cgi in mimicboard2 (Mimic2) 086 and earlier allow remote attackers to inject arbitrary web script or HTML via unspecified parameters associated with the (1) name, (2) title, and (3) comment sections, as demonstrated by referencing a remote document through the SRC attribute of an IFRAME element. |
| CVE-2005-4727 | Cross-site scripting (XSS) vulnerability in gbook.cgi in gBook before 1.0.2 allows remote attackers to inject arbitrary web script or HTML via the User-Agent HTTP header field. |
| CVE-2005-4455 | cleanhtml.pl 1.129 in LiveJournal CVS before Dec 13 2005 allows remote attackers to inject scripting languages via the XSL namespace in XML, via vectors such as customview.cgi. |
| CVE-2005-4405 | redqueen.cgi in Red Queen 1.02 and earlier allows remote attackers to obtain the full server path via invalid (1) yellowpage_id, (2) skin_id, (3) supplier_id, and (4) module parameters, which leaks the path in an error message. |
| CVE-2005-4354 | Cross-site scripting (XSS) vulnerability in webglimpse.cgi in Webglimpse 2.14.1 and earlier allows remote attackers to inject arbitrary web script or HTML via the query parameter. |
| CVE-2005-4328 | Cross-site scripting (XSS) vulnerability in webglimpse.cgi in Webglimpse 2.14.1 and earlier allows remote attackers to inject arbitrary web script or HTML via the ID parameter. |
| CVE-2005-4327 | Multiple cross-site scripting (XSS) vulnerabilities in Michael Arndt WebCal 1.11-3.04 allow remote attackers to inject arbitrary web script or HTML via the (1) function, (2) year, and (3) date parameters to webcal.cgi, (4) new calendar entries, and (5) notes for entries. |
| CVE-2005-4314 | Cross-site scripting (XSS) vulnerability in ppcal.cgi in PPCal Shopping Cart 3.3.0 and earlier allows remote attackers to inject arbitrary web script or HTML via the (1) stop and (2) user parameters. |
| CVE-2005-4307 | Cross-site scripting (XSS) vulnerability in ScareCrow 2.13 and earlier allows remote attackers to inject arbitrary web script or HTML via the forum parameter to (1) forum.cgi and (2) post.cgi, or (3) the user parameter to profile.cgi. |
| CVE-2005-4306 | Multiple cross-site scripting (XSS) vulnerabilities in SiteNet BBS 2.0 and earlier allow remote attackers to inject arbitrary web script or HTML via the (1) pg, (2) tid, (3) cid, and (4) fid parameters to netboardr.cgi, or (5) cid parameter to search.cgi. |
| CVE-2005-4299 | Cross-site scripting (XSS) vulnerability in atl.cgi in Atlant Pro 4.02 and earlier allows remote attackers to inject arbitrary web script or HTML via the (1) before and (2) ct parameters. |
| CVE-2005-4298 | Cross-site scripting (XSS) vulnerability in atl.cgi in AtlantForum 4.02 and earlier allows remote attackers to inject arbitrary web script or HTML via the (1) sch_allsubct, (2) before, and (3) ct parameters. |
| CVE-2005-4293 | Cross-site scripting (XSS) vulnerability in cp-app.cgi in ClickCartPro (CCP) 5.1 and earlier allows remote attackers to inject arbitrary web script or HTML via the affl parameter. |
| CVE-2005-4291 | Cross-site scripting (XSS) vulnerability in cart.cgi in ECTOOLS Onlineshop 1.0 and earlier allows remote attackers to inject arbitrary web script or HTML via the (1) product, (2) category, and (3) uid parameters. |
| CVE-2005-4290 | Cross-site scripting (XSS) vulnerability in index.cgi in ECW-Cart 2.03 and earlier allows remote attackers to inject arbitrary web script or HTML via the (1) kword, (2) max, (3) min, (4) comp, and (5) f parameters. |
| CVE-2005-4285 | Cross-site scripting (XSS) vulnerability in pdestore.cgi in Dick Copits PDEstore 1.8 and earlier allows remote attackers to inject arbitrary web script or HTML via (1) the search module parameter or the (2) product and (3) cart_id parameters. |
| CVE-2005-4284 | Cross-site scripting (XSS) vulnerability in StaticStore Search Engine 1.189A and earlier allows remote attackers to inject arbitrary web script or HTML via unspecified parameters to search.cgi, possibly the keywords parameter. NOTE: this issue was originally disputed by the vendor, but it has since been acknowledged. |
| CVE-2005-4283 | Cross-site scripting (XSS) vulnerability in The CITY Shop 1.3 and earlier allows remote attackers to inject arbitrary web script or HTML via parameters to the search module, possibly SKey to store.cgi. |
| CVE-2005-4282 | Cross-site scripting (XSS) vulnerability in Zaygo DomainCart 2.0 and earlier allows remote attackers to inject arbitrary web script or HTML, possibly via the root parameter to zaygo.cgi. |
| CVE-2005-4281 | Cross-site scripting (XSS) vulnerability in Zaygo HostingCart 2.0 and earlier allows remote attackers to inject arbitrary web script or HTML via certain search module parameters, possibly the root parameter to zaygo.cgi. |
| CVE-2005-4222 | Multiple cross-site scripting (XSS) vulnerabilities in guestbook.cgi in Lars Ellingsen Guestserver 4.13 and earlier allow remote attackers to inject arbitrary web script or HTML via unspecified message fields. |
| CVE-2005-4091 | Cross-site scripting (XSS) vulnerability in 1search.cgi in 1-Script 1-Search 1.8 allows remote attackers to inject arbitrary web script or HTML via the q parameter. |
| CVE-2005-4044 | Cross-site scripting (XSS) vulnerability in search.cgi in Amazon Search Directory 1.0.0 and earlier allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, possibly the search parameter. |
| CVE-2005-4042 | Cross-site scripting (XSS) vulnerability in Warm Links 1.0.0 and earlier allows remote attackers to inject arbitrary web script or HTML via a parameter to search.cgi. |
| CVE-2005-4041 | Cross-site scripting (XSS) vulnerability in search.cgi in MR CGI Guy Hot Links SQL 3.1.x and Hot Links Pro 3.1.x allows remote attackers to inject arbitrary web script or HTML via the query string. |
| CVE-2005-4036 | Cross-site scripting (XSS) vulnerability in index.cgi in Web4Future KeyWord Frequency Counter 1.0 allows remote attackers to inject arbitrary web script or HTML via the "remote URL." |
| CVE-2005-4032 | Cross-site scripting (XSS) vulnerability in search.cgi in Easy Search System 1.1 and earlier allows remote attackers to inject arbitrary web script or HTML via the q parameter. |
| CVE-2005-3661 | Dell TrueMobile 2300 Wireless Broadband Router running firmware 3.0.0.8 and 5.1.1.6, and possibly other versions, allows remote attackers to reset authentication credentials, then change configuration or firmware, via a direct request to apply.cgi with the Page parameter set to adv_password.asp. |
| CVE-2005-3579 | ts.exe (aka ts.cgi) in Walla TeleSite 3.0 and earlier allows remote attackers to access arbitrary local files via the querystring. |
| CVE-2005-3578 | SQL injection vulnerability in ts.exe (aka ts.cgi) in Walla TeleSite 3.0 and earlier allows remote attackers to inject arbitrary SQL commands via the sug parameter. |
| CVE-2005-3577 | Cross-site scripting vulnerability (XSS) in ts.exe (aka ts.cgi) in Walla TeleSite 3.0 and earlier allows remote attackers to inject arbitrary web script or HTML via the sug parameter. |
| CVE-2005-3559 | Directory traversal vulnerability in vmail.cgi in Asterisk 1.0.9 through 1.2.0-beta1 allows remote attackers to access WAV files via a .. (dot dot) in the folder parameter. |
| CVE-2005-3546 | suid.cgi scripts in F-Secure (1) Internet Gatekeeper for Linux before 2.15.484 and (2) Anti-Virus Linux Gateway before 2.16 are installed SUID with world-executable permissions, which allows local users to gain privilege. |
| CVE-2005-3355 | Directory traversal vulnerability in GNU Gnump3d before 2.9.8 has unknown impact via "CGI parameters, and cookie values". |
| CVE-2005-3269 | Stack-based buffer overflow in help.cgi in the HTTP administrative interface for (1) Sun Java System Directory Server 5.2 2003Q4, 2004Q2, and 2005Q1, (2) Red Hat Directory Server and (3) Certificate Server before 7.1 SP1, (4) Sun ONE Directory Server 5.1 SP4 and earlier, and (5) Sun ONE Administration Server 5.2 allows remote attackers to cause a denial of service (admin server crash), or local users to gain root privileges. |
| CVE-2005-3255 | The (1) cgiwrap and (2) php-cgiwrap packages before 3.9 in Debian GNU/Linux provide access to debugging CGIs under the web document root, which allows remote attackers to obtain sensitive information via direct requests to those CGIs. |
| CVE-2005-3138 | Bugzilla 2.18rc1 through 2.18.3, 2.19 through 2.20rc2, and 2.21 allows remote attackers to obtain sensitive information such as the list of installed products via the config.cgi file, which is accessible even when the requirelogin parameter is set. |
| CVE-2005-3104 | mt-comments.cgi in Movable Type before 3.2 allows attackers to redirect users to other web sites via URLs in comments. |
| CVE-2005-3097 | Directory traversal vulnerability in Avi Alkalay contribute.cgi (aka contribute.pl), dated 16 Jun 2002, allows remote attackers to overwrite arbitrary files via ".." sequences in the contribdir variable. |
| CVE-2005-3096 | Avi Alkalay nslookup.cgi program, dated 16 June 2002, allows remote attackers to execute arbitrary commands via shell metacharacters in the query parameter. |
| CVE-2005-3094 | Avi Alkalay man-cgi script allows remote attackers to execute arbitrary code via shell metacharacters in the topic parameter. |
| CVE-2005-3067 | Cross-site scripting (XSS) vulnerability in perldiver.cgi in PerlDiver 2.x allows remote attackers to inject arbitrary web script or HTML via the module parameter. |
| CVE-2005-2916 | Linksys WRT54G 3.01.03, 3.03.6, 4.00.7, and possibly other versions before 4.20.7, does not verify user authentication until after an HTTP POST request has been processed, which allows remote attackers to (1) modify configuration using restore.cgi or (2) upload new firmware using upgrade.cgi. |
| CVE-2005-2849 | Argument injection vulnerability in Barracuda Spam Firewall running firmware 3.1.16 and 3.1.17 allows remote attackers to (1) read portions of source code via the -f option to Dig (dig_device.cgi), (2) determine file existence via the -r argument to Tcpdump (tcpdump_device.cgi) or (3) modify files in the cgi-bin directory via the -w argument to Tcpdump. |
| CVE-2005-2799 | Buffer overflow in apply.cgi in Linksys WRT54G 3.01.03, 3.03.6, and possibly other versions before 4.20.7, allows remote attackers to execute arbitrary code via a long HTTP POST request. |
| CVE-2005-2786 | Directory traversal vulnerability in bestmail_edit.cgi in cosmoshop 8.10.78 and earlier allows remote administrators to read arbitrary files via ".." sequences in the file parameter. |
| CVE-2005-2334 | Y.SAK allows remote attackers to execute arbitrary commands via shell metacharacters in the $no variable to (1) w_s3mbfm.cgi, (2) w_s3adix.cgi, or (3) w_s3sbfm.cgi. |
| CVE-2005-2290 | wps_shop.cgi in WPS Web Portal System 0.7.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) art and (2) cat variables. |
| CVE-2005-2205 | The ReadLog function in kaiseki.cgi in pngren allows remote attackers to execute arbitrary commands via shell metacharacters in the query string. |
| CVE-2005-2195 | Apple Darwin Streaming Server 5.5 and earlier allows remote attackers to cause a denial of service (application crash) via a URL with a filename containing a .cgi extension and an MS-DOS device name such as AUX, CON, PRN, COM1, or LPT1, a different vulnerability than CVE-2003-0421 and CVE-2003-0502. |
| CVE-2005-2178 | probe.cgi allows remote attackers to execute arbitrary commands via shell metacharacters in the olddat parameter. NOTE: it is unclear which product or vendor this program is associated with, if any. |
| CVE-2005-2174 | Bugzilla 2.17.x, 2.18 before 2.18.2, 2.19.x, and 2.20 before 2.20rc1 inserts a bug into the database before it is marked private, which introduces a race condition and allows attackers to access information about the bug via buglist.cgi before MySQL replication is complete. |
| CVE-2005-2173 | The Flag::validate and Flag::modify functions in Bugzilla 2.17.1 to 2.18.1 and 2.19.1 to 2.19.3 do not verify that the flag ID is appropriate for the given bug or attachment ID, which allows users to change flags on arbitrary bugs and obtain a bug summary via process_bug.cgi. |
| CVE-2005-2165 | read.cgi in GlobalNoteScript allows remote attackers to execute arbitrary commands via shell metacharacters in the file parameters. |
| CVE-2005-2111 | login.cgi in Community Link Pro Web Editor allows remote attackers to execute arbitrary commands via the file parameter. |
| CVE-2005-2082 | im_trbbs.cgi in imTRSET 1.02 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in the df parameter. |
| CVE-2005-2069 | pam_ldap and nss_ldap, when used with OpenLDAP and connecting to a slave using TLS, does not use TLS for the subsequent connection if the client is referred to a master, which may cause a password to be sent in cleartext and allows remote attackers to sniff the password. |
| CVE-2005-1953 | Heap-based buffer overflow in the CGI extension for Pico Server (pServ) 3.3 allows remote attackers to execute arbitrary code via a long HTTP request. |
| CVE-2005-1941 | SilverCity before 0.9.5-r1 installs (1) cgi-styler-form.py, (2) cgi-styler.py, and (3) source2html.py with read and write world permissions, which allows local users to execute arbitrary code. |
| CVE-2005-1732 | Cookie Cart allows remote attackers to read the Order Notification list via the testmycgi and path parameters to testmy.cgi. |
| CVE-2005-1680 | D-Link DSL-502T, DSL-504T, DSL-562T, and DSL-G604T, when /cgi-bin/firmwarecfg is executed, allows remote attackers to bypass authentication (1) if their IP address already exists in /var/tmp/fw_ip or (2) if their request is the first, which causes /var/tmp/fw_ip to be created and contain their IP address. |
| CVE-2005-1628 | apage.cgi in WebAPP 0.9.9.2.1, and possibly earlier versions, allows remote attackers to execute arbitrary commands via shell metacharacters in the f parameter. |
| CVE-2005-1607 | Cross-site scripting (XSS) vulnerability in shop.cgi in Remote Cart allows remote attackers to inject arbitrary web script or HTML via the (1) merchant or (2) demo parameters. |
| CVE-2005-1564 | post_bug.cgi in Bugzilla 2.10 through 2.18, 2.19.1, and 2.19.2 allows remote authenticated users to "enter bugs into products that are closed for bug entry" by modifying the URL to specify the name of the product. |
| CVE-2005-1559 | The web module in Neteyes Nexusway allows remote attackers to execute arbitrary commands via hex-encoded shell metacharacters in the ip parameter for (1) nslookup.cgi or (2) ping.cgi. |
| CVE-2005-1494 | Multiple cross-site scripting (XSS) vulnerabilities in admin.cgi in MegaBook 2.0 and 2.1 allow remote attackers to inject arbitrary web script or HTML via the (1) entryid or (2) password parameter. |
| CVE-2005-1492 | Cross-site scripting (XSS) vulnerability in user.cgi in Gossamer Threads Links SQL 2.x and 3.0 allows remote attackers to inject arbitrary web script or HTML via the url parameter. |
| CVE-2005-1366 | Pico Server (pServ) 3.2 and earlier allows remote attackers to obtain the source code for CGI scripts via "dirname/../cgi-bin" in a URL. |
| CVE-2005-1359 | Cross-site scripting (XSS) vulnerability in text.cgi script allows remote attackers to inject arbitrary web script or HTML via the argument. |
| CVE-2005-1358 | text.cgi script allows remote attackers to execute arbitrary commands via shell metacharacters in the argument. |
| CVE-2005-1357 | text.cgi script allows remote attackers to read arbitrary files via a full pathname in the argument. |
| CVE-2005-1356 | Cross-site scripting (XSS) vulnerability in includer.cgi script in The Includer allows remote attackers to inject arbitrary web script or HTML via the argument. |
| CVE-2005-1355 | includer.cgi in The Includer allows remote attackers to read arbitrary files via a full pathname in the argument, a similar vulnerability to CVE-2005-0801. |
| CVE-2005-1352 | Cross-site scripting (XSS) vulnerability in the ad.cgi script allows remote attackers to inject arbitrary web script or HTML via the argument. |
| CVE-2005-1351 | The ad.cgi script allows remote attackers to execute arbitrary commands via shell metacharacters in the argument. |
| CVE-2005-1350 | The ad.cgi script allows remote attackers to read arbitrary files via a full pathname in the argument. |
| CVE-2005-1344 | Buffer overflow in htdigest in Apache 2.0.52 may allow attackers to execute arbitrary code via a long realm argument. NOTE: since htdigest is normally only locally accessible and not setuid or setgid, there are few attack vectors which would lead to an escalation of privileges, unless htdigest is executed from a CGI program. Therefore this may not be a vulnerability. |
| CVE-2005-1305 | The hyper.cgi script allows remote attackers to read arbitrary files via a full pathname in the argument. |
| CVE-2005-1300 | Cross-site scripting (XSS) vulnerability in the inserter.cgi script allows remote attackers to inject arbitrary web script or HTML via the argument. |
| CVE-2005-1299 | The inserter.cgi script allows remote attackers to execute arbitrary commands via shell metacharacters in the argument. |
| CVE-2005-1298 | The inserter.cgi script allows remote attackers to read arbitrary files via a full pathname in the argument. |
| CVE-2005-1297 | Cross-site scripting (XSS) vulnerability in the include.cgi script allows remote attackers to inject arbitrary web script or HTML via the argument. |
| CVE-2005-1296 | include.cgi script allows remote attackers to execute arbitrary commands via shell metacharacters in the argument. |
| CVE-2005-1295 | include.cgi script allows remote attackers to read arbitrary files via a full pathname in the argument. |
| CVE-2005-1289 | index.cgi in E-Cart 2004 1.1 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) art and possibly (2) cat parameters. |
| CVE-2005-0865 | Samsung ADSL Modem SMDK8947v1.2 uses default passwords for the (1) root, (2) admin, or (3) user users, which allows remote attackers to gain privileges via Telnet or an HTTP request to adsl.cgi. |
| CVE-2005-0801 | Directory traversal vulnerability in includer.cgi in The Includer allows remote attackers to read arbitrary files via (1) a .. (dot dot) or (2) a full pathname in the URL. |
| CVE-2005-0689 | includer.cgi in The Includer allows remote attackers to execute arbitrary commands via shell metacharacters in (1) the URL or (2) the template parameter. |
| CVE-2005-0623 | Buffer overflow in RaidenHTTPD 1.1.32, and possibly other versions before 1.1.34, allows remote attackers to execute arbitrary code via a long URL. |
| CVE-2005-0622 | RaidenHTTPD 1.1.32, and possibly other versions before 1.1.34, allows remote attackers to view the PHP source code via an HTTP GET request for a filename with a trailing (1) . (dot) or (2) space. |
| CVE-2005-0493 | CRLF injection vulnerability in bizmail.cgi in Biz Mail Form before 2.2 allows remote attackers to bypass the email check and send spam e-mail via CRLF sequences and forged mail headers in the email parameter. |
| CVE-2005-0476 | Cross-site scripting (XSS) vulnerability in hpm_guestbook.cgi allows remote attackers to inject arbitrary web script or HTML by posting a message. |
| CVE-2005-0453 | The buffer_urldecode function in Lighttpd 1.3.7 and earlier does not properly handle control characters, which allows remote attackers to obtain the source code for CGI and FastCGI scripts via a URL with a %00 (null) character after the file extension. |
| CVE-2005-0386 | Cross-site scripting (XSS) vulnerability in network.cgi in mailreader before 2.3.29 earlier allows remote attackers to inject arbitrary web script or HTML via MIME text/enriched or text/richtext messages. |
| CVE-2005-0111 | Stack-based buffer overflow in the websql CGI program in MySQL MaxDB 7.5.00 allows remote attackers to execute arbitrary code via a long password parameter. |
| CVE-2004-2776 | go.cgi in GoScript 2.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) query string or (2) artarchive parameter. |
| CVE-2004-2743 | upload.cgi in Mega Upload Progress Bar before 1.45 allows remote attackers to copy or overwrite arbitrary files via unspecified parameters related to names of uploaded files. |
| CVE-2004-2735 | Cross-site scripting (XSS) vulnerability in P4DB 2.01 and earlier allows remote attackers to inject arbitrary web script or HTML via (1) SET_PREFERENCES parameter in SetPreferences.cgi; (2) BRANCH parameter in branchView.cgi; (3) FSPC and (4) COMPLETE parameters in changeByUsers.cgi; (5) FSPC, (6) LABEL, (7) EXLABEL, (8) STATUS, (9) MAXCH, (10) FIRSTCH, (11) CHOFFSETDISP, (12) SEARCHDESC, (13) SEARCH_INVERT, (14) USER, (15) GROUP, and (16) CLIENT parameters in changeList.cgi; (17) CH parameter in changeView.cgi; (18) USER parameter in clientList.cgi; (19) CLIENT parameter in clientView.cgi; (20) FSPC parameter in depotTreeBrowser.cgi; (21) FSPC parameter in depotStats.cgi; (22) FSPC, (23) REV, (24) ACT, (25) FSPC2, (26) REV2, (27) CH, and (28) CONTEXT parameters in fileDiffView.cgi; (29) FSPC and (30) REV parameters in fileDownLoad.cgi; (31) FSPC, (32) LISTLAB, and (33) SHOWBRANCH parameters in fileLogView.cgi; (34) FSPC and (35) LABEL parameters in fileSearch.cgi; (36) FSPC, (37) REV, and (38) FORCE parameters in fileViewer.cgi; (39) FSPC parameter in filesChangedSince.cgi; (40) GROUP parameter in groupView.cgi; (41) TYPE, (42) FSPC, and (43) REV parameters in htmlFileView.cgi; (44) CMD parameter in javaDataView.cgi; (45) JOBVIEW and (46) FLD parameters in jobList.cgi; (47) JOB parameter in jobView.cgi; (48) LABEL1 and (49) LABEL2 parameters in labelDiffView.cgi; (50) LABEL parameter in labelView.cgi; (51) FSPC parameter in searchPattern.cgi; (52) TYPE, (53) FSPC, and (54) REV parameters in specialFileView.cgi; (55) GROUPSONLY parameter in userList.cgi; or (56) USER parameter in userView.cgi. |
| CVE-2004-2732 | nbmember.cgi in Netbilling 2.0 allows remote attackers to obtain sensitive information via the cmd=test option, which can be leveraged to determine the access key. |
| CVE-2004-2661 | Soft3304 04WebServer before 1.41 does not properly check file names, which allows remote attackers to obtain sensitive information (CGI source code). |
| CVE-2004-2640 | Directory traversal vulnerability in lstat.cgi in LinuxStat before 2.3.1 allows remote attackers to read arbitrary files via (1) .. (dot dot) sequences or (2) absolute paths to the template parameter. |
| CVE-2004-2560 | DokuWiki before 2004-10-19, when used on a web server that permits execution based on file extension, allows remote attackers to execute arbitrary code by uploading a file with an appropriate extension such as ".php" or ".cgi". |
| CVE-2004-2508 | Cross-site scripting (XSS) vulnerability in main.cgi in Linksys WVC11B Wireless-B Internet Video Camera allows remote attackers to inject arbitrary web script or HTML via the next_file parameter. |
| CVE-2004-2507 | Absolute path traversal vulnerability in main.cgi in Linksys WVC11B Wireless-B Internet Video Camera allows remote attackers to read arbitrary files via an absolute pathname in the next_file parameter. |
| CVE-2004-2427 | Axis Network Camera 2.40 and earlier, and Video Server 3.12 and earlier, allows remote attackers to obtain sensitive information via direct requests to (1) admin/getparam.cgi, (2) admin/systemlog.cgi, (3) admin/serverreport.cgi, and (4) admin/paramlist.cgi, modify system information via (5) setparam.cgi and (6) factorydefault.cgi, or (7) cause a denial of service (reboot) via restart.cgi. |
| CVE-2004-2426 | Directory traversal vulnerability in Axis Network Camera 2.40 and earlier, and Video Server 3.12 and earlier, allows remote attackers to bypass authentication via a .. (dot dot) in an HTTP POST request to ServerManager.srv, then use these privileges to conduct other activities, such as modifying files using editcgi.cgi. |
| CVE-2004-2425 | Axis Network Camera 2.40 and earlier, and Video Server 3.12 and earlier, allows remote attackers to execute arbitrary commands via accent (`) and possibly other shell metacharacters in the query string to virtualinput.cgi. |
| CVE-2004-2347 | blog.cgi in Leif M. Wright Web Blog 1.1 and 1.1.5 allows remote attackers to execute arbitrary commands via shell metacharacters such as '|' in the file parameter of ViewFile requests. |
| CVE-2004-2318 | The administrative interface (surgeftpmgr.cgi) for SurgeFTP Server 1.0b through 2.2k1 allows remote attackers to cause a temporary denial of service (crash) via requests with two percent (%) signs in the CMD parameter. |
| CVE-2004-2275 | i-mall.cgi in I-Mall Commerce allows remote attackers to execute arbitrary commands via shell metacharacters via the p parameter. |
| CVE-2004-2254 | SurgeLDAP 1.0g (Build 12), and possibly other versions before 1.0h, allows remote attackers to bypass authentication for the administration interface via a direct request to admin.cgi with a modified utoken parameter. |
| CVE-2004-2253 | Directory traversal vulnerability in user.cgi in SurgeLDAP 1.0g and earlier allows remote attackers to read arbitrary files via a .. in the page parameter of the show command. |
| CVE-2004-2132 | Directory traversal vulnerability in PJreview_Neo.cgi in PJ CGI Neo review allows remote attackers to read arbitrary files via a .. (dot dot) in the p parameter. |
| CVE-2004-2122 | Cross-site scripting (XSS) vulnerability in intraforum_db.cgi in Intra Forum allows remote attackers to inject arbitrary web script or HTML via the (1) use_last_read or (2) forum parameters. |
| CVE-2004-1888 | display.cgi in Aborior Encore WebForum allows remote to execute arbitrary commands via shell metacharacters in the file variable. |
| CVE-2004-1867 | Cross-site scripting (XSS) vulnerability in guest.cgi in Fresh Guest Book allows remote attackers to inject arbitrary web script or HTML via the Name field. |
| CVE-2004-1710 | page.cgi allows remote attackers to execute arbitrary commands via shell metacharacters in the url parameter. |
| CVE-2004-1680 | application.cgi in the Pingtel Xpressa handset running firmware 2.1.11.24 allows remote authenticated users to cause a denial of service (VxWorks OS crash) via a long HTTP GET request, possibly triggering a buffer overflow. |
| CVE-2004-1678 | Directory traversal vulnerability in pdesk.cgi in PerlDesk allows remote attackers to read portions of arbitrary files and possibly execute arbitrary Perl modules via ".." sequences terminated by a %00 (null) character in the lang parameter, which can leak portions of the requested files if a compilation error message occurs. |
| CVE-2004-1677 | pdesk.cgi in PerlDesk allows remote attackers to gain sensitive information via an invalid lang parameter, which includes pathname information in an error message. |
| CVE-2004-1634 | show_bug.cgi in Bugzilla 2.17.1 through 2.18rc2 and 2.19 from CVS, when using the insidergroup feature and exporting a bug to XML, shows comments and attachment summaries which are marked as private, which allows remote attackers to gain sensitive information. |
| CVE-2004-1633 | process_bug.cgi in Bugzilla 2.9 through 2.18rc2 and 2.19 from CVS does not check edit permissions on the keywords field, which allows remote authenticated users to modify the keywords in a bug via the keywordaction parameter. |
| CVE-2004-1442 | Cross-site scripting (XSS) vulnerability in db2www CGI interpreter in IBM Net.Data 7 and 7.2 allows remote attackers to inject arbitrary web script or HTML via a macro filename, which is not properly handled by error messages such as "DTWP001E." |
| CVE-2004-1441 | Cross-site scripting (XSS) vulnerability in icq.cgi in Board Power 2.04PF allows remote attackers to inject arbitrary web script or HTML via the action parameter. |
| CVE-2004-1406 | SQL injection vulnerability in ikonboard.cgi in Ikonboard 3.1.0 through 3.1.3 allows remote attackers to inject arbitrary SQL commands via the (1) st or (2) keywords parameter. |
| CVE-2004-1318 | Cross-site scripting (XSS) vulnerability in namazu.cgi for Namazu 2.0.13 and earlier allows remote attackers to inject arbitrary HTML and web script via a query that starts with a tab ("%09") character, which prevents the rest of the query from being properly sanitized. |
| CVE-2004-1263 | changepassword.cgi in ChangePassword 0.8, when installed setuid, allows local users to execute arbitrary code by modifying the PATH environment variable to point to a malicious "make" program. |
| CVE-2004-0983 | The CGI module in Ruby 1.6 before 1.6.8, and 1.8 before 1.8.2, allows remote attackers to cause a denial of service (infinite loop and CPU consumption) via a certain HTTP request. |
| CVE-2004-0939 | changepassword.cgi in Neoteris Instant Virtual Extranet (IVE) 3.x and 4.x, with LDAP authentication or NT domain authentication enabled, does not limit the number of times a bad password can be entered, which allows remote attackers to guess passwords via a brute force attack. |
| CVE-2004-0798 | Buffer overflow in the _maincfgret.cgi script for Ipswitch WhatsUp Gold before 8.03 Hotfix 1 allows remote attackers to execute arbitrary code via a long instancename parameter. |
| CVE-2004-0781 | Cross-site scripting (XSS) vulnerability in list.cgi in the Icecast internal web server (icecast-server) 1.3.12 and earlier allows remote attackers to inject arbitrary web script via the UserAgent parameter. |
| CVE-2004-0755 | The FileStore capability in CGI::Session for Ruby before 1.8.1, and possibly PStore, creates files with insecure permissions, which can allow local users to steal session information and hijack sessions. |
| CVE-2004-0734 | Web_Store.cgi allows remote attackers to execute arbitrary commands via shell metacharacters in the page parameter. |
| CVE-2004-0707 | SQL injection vulnerability in editusers.cgi in Bugzilla 2.16.x before 2.16.6, and 2.18 before 2.18rc1, allows remote attackers with privileges to grant membership to any group to execute arbitrary SQL. |
| CVE-2004-0705 | Multiple cross-site scripting (XSS) vulnerabilities in (1) editcomponents.cgi, (2) editgroups.cgi, (3) editmilestones.cgi, (4) editproducts.cgi, (5) editusers.cgi, and (6) editversions.cgi in Bugzilla 2.16.x before 2.16.6, and 2.18 before 2.18rc1, allow remote attackers to execute arbitrary JavaScript as other users via a URL parameter. |
| CVE-2004-0704 | Unknown vulnerability in (1) duplicates.cgi and (2) buglist.cgi in Bugzilla 2.16.x before 2.16.6, 2.18 before 2.18rc1, when configured to hide products, allows remote attackers to view hidden products. |
| CVE-2004-0696 | The ShellExample.cgi script in 4D WebSTAR 5.3.2 and earlier allows remote attackers to list arbitrary directories via a URL with the desired path and a "*" (asterisk) character. |
| CVE-2004-0665 | csFAQ.cgi in csFAQ allows remote attackers to gain sensitive information via an invalid database parameter, which reveals the path to the web server in an error message. |
| CVE-2004-0529 | The modified suexec program in cPanel, when configured for mod_php and compiled for Apache 1.3.31 and earlier without mod_phpsuexec, allows local users to execute untrusted shared scripts and gain privileges, as demonstrated using untainted scripts such as (1) proftpdvhosts or (2) addalink.cgi, a different vulnerability than CVE-2004-0490. |
| CVE-2004-0347 | Cross-site scripting (XSS) vulnerability in delhomepage.cgi in NetScreen-SA 5000 Series running firmware 3.3 Patch 1 (build 4797) allows remote authenticated users to execute arbitrary script as other users via the row parameter. |
| CVE-2004-0335 | LAN SUITE Web Mail 602Pro, when configured to use the "Directory browsing" feature, allows remote attackers to obtain a directory listing via an HTTP request to (1) index.html, (2) cgi-bin/, or (3) users/. |
| CVE-2004-0293 | Directory traversal vulnerability in ShopCartCGI 2.3 allows remote attackers to retrieve arbitrary files via a .. (dot dot) in a HTTP request to (1) gotopage.cgi or (2) genindexpage.cgi. |
| CVE-2004-0261 | oj.cgi in OpenJournal 2.0 through 2.0.5 allows remote attackers to bypass authentication and access the control panel via a 0 in the uid parameter. |
| CVE-2004-0251 | Cross-site scripting (XSS) vulnerability in rxgoogle.cgi allows remote attackers to execute arbitrary script as other users via the query parameter. |
| CVE-2003-1558 | Buffer overflow in httpd.c of fnord 1.6 allows remote attackers to create a denial of service (crash) and possibly execute arbitrary code via a long CGI request passed to the do_cgi function. |
| CVE-2003-1556 | Cross-site scripting (XSS) vulnerability in cc_guestbook.pl in CGI City CC GuestBook allows remote attackers to inject arbitrary web script or HTML via the (1) name and (2) homepage_title (webpage title) parameters. |
| CVE-2003-1538 | susehelp in SuSE Linux 8.1, Enterprise Server 8, Office Server, and Openexchange Server 4 does not properly filter shell metacharacters, which allows remote attackers to execute arbitrary commands via CGI queries. |
| CVE-2003-1510 | TinyWeb 1.9 allows remote attackers to cause a denial of service (CPU consumption) via a ".%00." in an HTTP GET request to the cgi-bin directory. |
| CVE-2003-1501 | Directory traversal vulnerability in the file upload CGI of Gast Arbeiter 1.3 allows remote attackers to write arbitrary files via a .. (dot dot) in the req_file parameter. |
| CVE-2003-1425 | guestbook.cgi in cPanel 5.0 allows remote attackers to execute arbitrary commands via the template parameter. |
| CVE-2003-1413 | parse_xml.cgi in Apple Darwin Streaming Server 4.1.1 allows remote attackers to determine the existence of arbitrary files by using ".." sequences in the filename parameter and comparing the resulting error messages. |
| CVE-2003-1386 | AXIS 2400 Video Server 2.00 through 2.33 allows remote attackers to obtain sensitive information via an HTTP request to /support/messages, which displays the server's /var/log/messages file. |
| CVE-2003-1373 | Directory traversal vulnerability in auth.php for PhpBB 1.4.0 through 1.4.4 allows remote attackers to read and include arbitrary files via .. (dot dot) sequences followed by NULL (%00) characters in CGI parameters, as demonstrated using the lang parameter in prefs.php. |
| CVE-2003-1365 | The escape_dangerous_chars function in CGI::Lite 2.0 and earlier does not correctly remove special characters including (1) "\" (backslash), (2) "?", (3) "~" (tilde), (4) "^" (carat), (5) newline, or (6) carriage return, which could allow remote attackers to read or write arbitrary files, or execute arbitrary commands, in shell scripts that rely on CGI::Lite to filter such dangerous inputs. |
| CVE-2003-1351 | Directory traversal vulnerability in edittag.cgi in EditTag 1.1 allows remote attackers to read arbitrary files via a "%2F.." (encoded slash dot dot) in the file parameter. |
| CVE-2003-1348 | Cross-site scripting (XSS) vulnerability in guestbook.cgi in ftls.org Guestbook 1.1 allows remote attackers to inject arbitrary web script or HTML via the (1) comment, (2) name, or (3) title field. |
| CVE-2003-1270 | AN HTTP 1.41e allows remote attackers to cause a denial of service (borken pipe) via an HTTP request to aux.cgi with a long argument, possibly triggering a buffer overflow or MS-DOS device vulnerability. |
| CVE-2003-1247 | Multiple buffer overflows in H-Sphere WebShell 2.3 allow remote attackers to execute arbitrary code via (1) a long URL content type in CGI::readFile, (2) a long path in diskusage, and (3) a long fname in flist. |
| CVE-2003-1200 | Stack-based buffer overflow in FORM2RAW.exe in Alt-N MDaemon 6.5.2 through 6.8.5 allows remote attackers to execute arbitrary code via a long From parameter to Form2Raw.cgi. |
| CVE-2003-1137 | Charles Steinkuehler sh-httpd 0.3 and 0.4 allows remote attackers to read files or execute arbitrary CGI scripts via a GET request that contains an asterisk (*) wildcard character. |
| CVE-2003-1046 | describecomponents.cgi in Bugzilla 2.17.3 and 2.17.4 does not properly verify group membership when bug entry groups are used, which allows remote attackers to list component descriptions for otherwise restricted products. |
| CVE-2003-1045 | votes.cgi in Bugzilla 2.16.3 and earlier, and 2.17.1 through 2.17.4, allows remote attackers to read a user's voting page when that user has voted on a restricted bug, which allows remote attackers to read potentially sensitive voting information by modifying the who parameter. |
| CVE-2003-1044 | editproducts.cgi in Bugzilla 2.16.3 and earlier, when usebuggroups is enabled, does not properly remove group add privileges from a group that is being deleted, which allows users with those privileges to perform unauthorized additions to the next group that is assigned with the original group ID. |
| CVE-2003-1043 | SQL injection vulnerability in Bugzilla 2.16.3 and earlier, and 2.17.1 through 2.17.4, allows remote authenticated users with editkeywords privileges to execute arbitrary SQL via the id parameter to editkeywords.cgi. |
| CVE-2003-0992 | Cross-site scripting (XSS) vulnerability in the create CGI script for Mailman before 2.1.3 allows remote attackers to steal cookies of other users. |
| CVE-2003-0965 | Cross-site scripting (XSS) vulnerability in the admin CGI script for Mailman before 2.1.4 allows remote attackers to steal session cookies and conduct unauthorized activities. |
| CVE-2003-0887 | ez-ipupdate 3.0.11b7 and earlier creates insecure temporary cache files, which allows local users to conduct unauthorized operations via a symlink attack on the ez-ipupdate.cache file. |
| CVE-2003-0789 | mod_cgid in Apache before 2.0.48, when using a threaded MPM, does not properly handle CGI redirect paths, which could cause Apache to send the output of a CGI program to the wrong client. |
| CVE-2003-0762 | Buffer overflow in (1) foxweb.dll and (2) foxweb.exe of Foxweb 2.5 allows remote attackers to execute arbitrary code via a long URL (PATH_INFO value). |
| CVE-2003-0756 | Directory traversal vulnerability in sitebuilder.cgi in SiteBuilder 1.4 allows remote attackers to read arbitrary files via .. (dot dot) sequences in the selectedpage parameter. |
| CVE-2003-0709 | Buffer overflow in the whois client, which is not setuid but is sometimes called from within CGI programs, may allow remote attackers to execute arbitrary code via a long command line option. |
| CVE-2003-0632 | Buffer overflow in the Oracle Applications Web Report Review (FNDWRR) CGI program (FNDWRR.exe) of Oracle E-Business Suite 11.0 and 11.5.1 through 11.5.8 may allow remote attackers to execute arbitrary code via a long URL. |
| CVE-2003-0627 | psdoccgi.exe in PeopleSoft PeopleTools 8.4 through 8.43 allows remote attackers to cause a denial of service (application crash), possibly via the headername and footername arguments. |
| CVE-2003-0626 | psdoccgi.exe in PeopleSoft PeopleTools 8.4 through 8.43 allows remote attackers to read arbitrary files via the (1) headername or (2) footername arguments. |
| CVE-2003-0623 | Cross-site scripting (XSS) vulnerability in the Administration Console for BEA Tuxedo 8.1 and earlier allows remote attackers to inject arbitrary web script via the INIFILE argument. |
| CVE-2003-0622 | The Administration Console for BEA Tuxedo 8.1 and earlier allows remote attackers to cause a denial of service (hang) via pathname arguments that contain MS-DOS device names such as CON and AUX. |
| CVE-2003-0621 | The Administration Console for BEA Tuxedo 8.1 and earlier allows remote attackers to determine the existence of files outside the web root via modified paths in the INIFILE argument. |
| CVE-2003-0495 | Cross-site scripting (XSS) vulnerability in LedNews 0.7 allows remote attackers to insert arbitrary web script via a news item. |
| CVE-2003-0437 | Buffer overflow in search.cgi for mnoGoSearch 3.2.10 allows remote attackers to execute arbitrary code via a long tmplt parameter. |
| CVE-2003-0436 | Buffer overflow in search.cgi for mnoGoSearch 3.1.20 allows remote attackers to execute arbitrary code via a long ul parameter. |
| CVE-2003-0424 | Apple QuickTime / Darwin Streaming Server before 4.1.3f allows remote attackers to obtain the source code for scripts by appending encoded space (%20) or . (%2e) characters to an HTTP request for the script, e.g. view_broadcast.cgi. |
| CVE-2003-0423 | parse_xml.cgi in Apple QuickTime / Darwin Streaming Server before 4.1.3g allows remote attackers to obtain the source code for parseable files via the filename parameter. |
| CVE-2003-0422 | Apple QuickTime / Darwin Streaming Server before 4.1.3f allows remote attackers to cause a denial of service (crash) via a request to view_broadcast.cgi that does not contain the required parameters. |
| CVE-2003-0416 | Cross-site scripting (XSS) vulnerability in index.cgi for Bandmin 1.4 allows remote attackers to insert arbitrary HTML or script via (1) the year parameter in a showmonth action, (2) the month parameter in a showmonth action, or (3) the host parameter in a showhost action. |
| CVE-2003-0278 | Cross-site scripting (XSS) vulnerability in normal_html.cgi in Happycgi.com Happymall 4.3 and 4.4 allows remote attackers to insert arbitrary web script via the file parameter. |
| CVE-2003-0277 | Directory traversal vulnerability in normal_html.cgi in Happycgi.com Happymall 4.3 and 4.4 allows remote attackers to read arbitrary files via .. (dot dot) sequences in the file parameter. |
| CVE-2003-0243 | Happycgi.com Happymall 4.3 and 4.4 allows remote attackers to execute arbitrary commands via shell metacharacters in the file parameter for the (1) normal_html.cgi or (2) member_html.cgi scripts. |
| CVE-2003-0217 | Cross-site scripting (XSS) vulnerability in Neoteris Instant Virtual Extranet (IVE) 3.01 and earlier allows remote attackers to insert arbitrary web script and bypass authentication via a certain CGI script. |
| CVE-2003-0154 | Cross-site scripting vulnerabilities (XSS) in bonsai Mozilla CVS query tool allow remote attackers to execute arbitrary web script via (1) the file, root, or rev parameters to cvslog.cgi, (2) the file or root parameters to cvsblame.cgi, (3) various parameters to cvsquery.cgi, (4) the person parameter to showcheckins.cgi, (5) the module parameter to cvsqueryform.cgi, and (6) possibly other attack vectors as identified by Mozilla bug #146244. |
| CVE-2003-0153 | bonsai Mozilla CVS query tool leaks the absolute pathname of the tool in certain error messages generated by (1) cvslog.cgi, (2) cvsview2.cgi, or (3) multidiff.cgi. |
| CVE-2003-0097 | Unknown vulnerability in CGI module for PHP 4.3.0 allows attackers to access arbitrary files as the PHP user, and possibly execute PHP code, by bypassing the CGI force redirect settings (cgi.force_redirect or --enable-force-cgi-redirect). |
| CVE-2003-0057 | Multiple buffer overflows in Hypermail 2 before 2.1.6 allows remote attackers to cause a denial of service and possibly execute arbitrary code (1) via a long attachment filename that is not properly handled by the hypermail executable, or (2) by connecting to the mail CGI program from an IP address that reverse-resolves to a long hostname. |
| CVE-2003-0053 | Cross-site scripting (XSS) vulnerability in parse_xml.cgi in Apple Darwin Streaming Administration Server 4.1.2 and QuickTime Streaming Server 4.1.1 allows remote attackers to insert arbitrary script via the filename parameter, which is inserted into an error message. |
| CVE-2003-0052 | parse_xml.cgi in Apple Darwin Streaming Administration Server 4.1.2 and QuickTime Streaming Server 4.1.1 allows remote attackers to list arbitrary directories. |
| CVE-2003-0051 | parse_xml.cgi in Apple Darwin Streaming Administration Server 4.1.2 and QuickTime Streaming Server 4.1.1 allows remote attackers to obtain the physical path of the server's installation path via a NULL file parameter. |
| CVE-2003-0050 | parse_xml.cgi in Apple Darwin Streaming Administration Server 4.1.2 and QuickTime Streaming Server 4.1.1 allows remote attackers to execute arbitrary code via shell metacharacters. |
| CVE-2002-2420 | site_searcher.cgi in Super Site Searcher allows remote attackers to execute arbitrary commands via shell metacharacters in the page parameter. |
| CVE-2002-2399 | Directory traversal vulnerability in viewAttachment.cgi in W3Mail 1.0.6 allows remote attackers to read arbitrary files via a .. (dot dot) in the file parameter. |
| CVE-2002-2377 | Cross-site scripting (XSS) vulnerability in addentry.cgi in ZAP 1.0.3 allows remote attackers to inject arbitrary SSi directives, web script, and HTML via the entry field. |
| CVE-2002-2360 | The RPC module in Webmin 0.21 through 0.99, when installed without root or admin privileges, allows remote attackers to read and write to arbitrary files and execute arbitrary commands via remote_foreign_require and remote_foreign_call requests. |
| CVE-2002-2356 | HAMweather 2.x allows remote attackers to modify administrative settings and obtain sensitive information via a direct request to hwadmin.cgi. |
| CVE-2002-2257 | Stack-based buffer overflow in the parse_field function in cgi_lib.c for LIBCGI 1.0.2 and 1.0.3 allows remote attackers to execute arbitrary code via a long argument. |
| CVE-2002-2251 | Buffer overflow in the changevalue function in libcgi.h for Marcos Luiz Onisto Lib CGI 0.1 allows remote attackers to execute arbitrary code via a long argument. |
| CVE-2002-2219 | chetcpasswd.cgi in Pedro Lineu Orso chetcpasswd before 2.1 allows remote attackers to read the last line of the shadow file via a long user (userid) field. |
| CVE-2002-2193 | Cross-site scripting (XSS) vulnerability in mojo.cgi for Mojo Mail 2.7 allows remote attackers to inject arbitrary web script via the email parameter. |
| CVE-2002-2113 | search.cgi in AGH HTMLsearch 1.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the template parameter. |
| CVE-2002-2085 | Directory traversal vulnerability in page.cgi of WWWeBBB Forum 3.82 beta and earlier allows remote attackers to read arbitrary files via a .. (dot dot) in an HTTP request. |
| CVE-2002-2033 | faqmanager.cgi in FAQManager 2.2.5 and earlier allows remote attackers to read arbitrary files by specifying the filename in the toc parameter with a trailing null character (%00). |
| CVE-2002-2011 | Cross-site scripting (XSS) vulnerability in the fom CGI program (fom.cgi) in Faq-O-Matic 2.711 and 2.712 allows remote attackers to inject arbitrary web script or HTML via the file parameter. |
| CVE-2002-2010 | Cross-site scripting (XSS) vulnerability in htsearch.cgi in htdig (ht://Dig) 3.1.5, 3.1.6, and 3.2 allows remote attackers to inject arbitrary web script or HTML via the words parameter. |
| CVE-2002-1986 | Perception LiteServe 2.0 through 2.0.1 allows remote attackers to obtain the source code of CGI scripts via an HTTP request with a trailing dot ("."). |
| CVE-2002-1966 | Directory traversal vulnerability in magiccard.cgi in My Postcards Platinum 5.0 and 6.0 allows remote attackers to read arbitrary files via a .. (dot dot) in the page parameter. |
| CVE-2002-1938 | Virgil CGI Scanner 0.9 allows remote attackers to execute arbitrary commands via the (1) tar (TARGET) or (2) zielport (ZIELPORT) parameters. |
| CVE-2002-1927 | Aquonics File Manager 1.5 allows users with edit privileges to modify user accounts by editing the userlist.cgi file. |
| CVE-2002-1902 | CGIForum 1.0 through 1.05 allows remote attackers to cause a denial of service (infinite recursion) by creating a message board post that is a child of an outdated parent. |
| CVE-2002-1874 | astrocam.cgi in AstroCam 0.9-1-1 through 1.4.0 allows remote attackers to execute arbitrary commands via shell metacharacters in an HTTP request. NOTE: earlier disclosures stated that the affected versions were 1.7.1 through 2.1.2, but the vendor explicitly stated that these were incorrect. |
| CVE-2002-1867 | The default configuration of BizDesign ImageFolio 2.23 through 2.26 does not control access to (1) admin/setup.cgi, which allows remote attackers to create an administrative account, or (2) admin/nph-build.cgi, which allows remote attackers to cause a denial of service (CPU consumption). |
| CVE-2002-1854 | Rlaj whois CGI script (whois.cgi) 1.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the domain name field. |
| CVE-2002-1850 | mod_cgi in Apache 2.0.39 and 2.0.40 allows local users and possibly remote attackers to cause a denial of service (hang and memory consumption) by causing a CGI script to send a large amount of data to stderr, which results in a read/write deadlock between httpd and the CGI script. |
| CVE-2002-1815 | Directory traversal vulnerability in source.php and source.cgi in Aquonics File Manager 1.5 allows remote attackers to read arbitrary files via a .. (dot dot) in the URL. |
| CVE-2002-1771 | Matt Wright FormMail 1.9 and earlier allows remote attackers to send spam or anonymous e-mail by injecting a newline character followed by CC:, BCC:, or additional TO: fields in the email and realname CGI variables. |
| CVE-2002-1753 | csNewsPro.cgi in CGIScript.net csNews Professional (csNewsPro) allows remote attackers to execute arbitrary Perl code via the setup parameter, which is processed by the Perl eval function. |
| CVE-2002-1752 | csChatRBox.cgi in CGIScript.net csChat-R-Box allows remote attackers to execute arbitrary Perl code via the setup parameter, which is processed by the Perl eval function. |
| CVE-2002-1751 | csLiveSupport.cgi in CGIScript.net csLiveSupport allows remote attackers to execute arbitrary Perl code via the setup parameter, which is processed by the Perl eval function. |
| CVE-2002-1750 | csGuestbook.cgi in CGISCRIPT.NET csGuestbook 1.0 allows remote attackers to execute arbitrary Perl code via the setup parameter, which is processed by the Perl eval function. |
| CVE-2002-1741 | Directory traversal vulnerability in WorldClient.cgi in WorldClient for Alt-N Technologies MDaemon 5.0.5.0 and earlier allows local users to delete arbitrary files via a ".." (dot dot) in the Attachments parameter. |
| CVE-2002-1740 | Buffer overflow in WorldClient.cgi in WorldClient in Alt-N Technologies MDaemon 5.0.5.0 and earlier allows local users to execute arbitrary code via a long folder name (NewFolder parameter). |
| CVE-2002-1703 | Cross-site scripting vulnerability (XSS) in auction.cgi for Mewsoft NetAuction 3.0 allows remote attackers to execute arbitrary script as other users via the Term parameter. |
| CVE-2002-1680 | Cross-site scripting (XSS) vulnerability in CGI Online Worldweb Shopping 1.1 (a.k.a. COWS) allows remote attackers to execute arbitrary script as other users by injecting script into (1) diagnose.cgi or (2) compatible.cgi. |
| CVE-2002-1677 | 14all.cgi 1.1p15 in mrtgconfig allows remote attackers to determine the physical path to the web root directory via a request with an invalid cfg parameter, which generates an error message that reveals the path. |
| CVE-2002-1658 | Buffer overflow in htdigest in Apache 1.3.26 and 1.3.27 may allow attackers to execute arbitrary code via a long user argument. NOTE: since htdigest is normally only locally accessible and not setuid or setgid, there are few attack vectors which would lead to an escalation of privileges, unless htdigest is executed from a CGI program. Therefore this may not be a vulnerability. |
| CVE-2002-1635 | The Apache configuration file (httpd.conf) in Oracle 9i Application Server (9iAS) uses a Location alias for /perl directory instead of a ScriptAlias, which allows remote attackers to read the source code of arbitrary CGI files via a URL containing the /perl directory instead of /cgi-bin. |
| CVE-2002-1628 | Directory traversal vulnerability in vote.cgi for Mike Spice Mike's Vote CGI before 1.3 allows remote attackers to write arbitrary files via .. (dot dot) sequences in the type parameter. |
| CVE-2002-1627 | Directory traversal vulnerability in quiz.cgi for Mike Spice Quiz Me! before 0.6 allows remote attackers to write arbitrary files via .. (dot dot) sequences in the quiz parameter. |
| CVE-2002-1600 | Directory traversal vulnerability in Mike Spice's My Classifieds (classifieds.cgi) before 1.3 allows remote attackers to overwrite arbitrary files via the category parameter. |
| CVE-2002-1592 | The ap_log_rerror function in Apache 2.0 through 2.035, when a CGI application encounters an error, sends error messages to the client that include the full path for the server, which allows remote attackers to obtain sensitive information. |
| CVE-2002-1582 | compose.cgi in Mailreader.com 2.3.30 and 2.3.31, when using Sendmail as the Mail Transfer Agent, allows remote attackers to execute arbitrary commands via shell metacharacters in the RealEmail configuration variable, which is used to call Sendmail in network.cgi. |
| CVE-2002-1581 | Directory traversal vulnerability in nph-mr.cgi in Mailreader.com 2.3.20 through 2.3.31 allows remote attackers to view arbitrary files via .. (dot dot) sequences and a null byte (%00) in the configLanguage parameter. |
| CVE-2002-1527 | emumail.cgi in EMU Webmail 5.0 allows remote attackers to determine the full pathname for emumail.cgi via a malformed string containing script, which generates a regular expression matching error that includes the pathname in the resulting error message. |
| CVE-2002-1526 | Cross-site scripting (XSS) vulnerability in emumail.cgi for EMU Webmail 5.0 allows remote attackers to inject arbitrary HTML or script via the email address field. |
| CVE-2002-1427 | The print_html_to_file function in edit.cgi for Easy Homepage Creator 1.0 does not check user credentials, which allows remote attackers to modify home pages of other users. |
| CVE-2002-1410 | Easy Guestbook CGI programs do not authenticate the administrator, which allows remote attackers to (1) delete entries via direct access of admin.cgi, or (2) reconfigure Guestbook via direct access of config.cgi. |
| CVE-2002-1361 | overflow.cgi CGI script in Sun Cobalt RaQ 4 with the SHP (Security Hardening Patch) installed allows remote attackers to execute arbitrary code via a POST request with shell metacharacters in the email parameter. |
| CVE-2002-1334 | Cross-site scripting (XSS) vulnerability in BizDesign ImageFolio 3.01 and earlier allows remote attackers to execute arbitrary web script as other users via (1) the direct parameter in imageFolio.cgi, or (2) nph-build.cgi. |
| CVE-2002-1236 | The remote management web server for Linksys BEFSR41 EtherFast Cable/DSL Router before firmware 1.42.7 allows remote attackers to cause a denial of service (crash) via an HTTP request to Gozila.cgi without any arguments. |
| CVE-2002-1196 | editproducts.cgi in Bugzilla 2.14.x before 2.14.4, and 2.16.x before 2.16.1, when the "usebuggroups" feature is enabled and more than 47 groups are specified, does not properly calculate bit values for large numbers, which grants extra permissions to users via known features of Perl math that set multiple bits. |
| CVE-2002-1178 | Directory traversal vulnerability in the CGIServlet for Jetty HTTP server before 4.1.0 allows remote attackers to execute arbitrary commands via ..\ (dot-dot backslash) sequences in an HTTP request to the cgi-bin directory. |
| CVE-2002-1156 | Apache 2.0.42 allows remote attackers to view the source code of a CGI script via a POST request to a directory with both WebDAV and CGI enabled. |
| CVE-2002-1147 | The HTTP administration interface for HP Procurve 4000M Switch firmware before C.09.16, with stacking features and remote administration enabled, does not authenticate requests to reset the device, which allows remote attackers to cause a denial of service via a direct request to the device_reset CGI program. |
| CVE-2002-1089 | rwcgi60 CGI program in Oracle Reports Server, by design, provides sensitive information such as the full pathname, which could enable remote attackers to use the information in additional attacks. |
| CVE-2002-1028 | Multiple buffer overflows in the CGI programs for Oddsock Song Requester WinAmp plugin 2.1 allow remote attackers to cause a denial of service (crash) via long arguments. |
| CVE-2002-1009 | Cross-site scripting vulnerability in PowerBASIC pbcgi.cgi, as included in Lil' HTTP web server, allows remote attackers to execute arbitrary web script in other web browsers via the (1) "Name" or (2) "E-mail" parameters. |
| CVE-2002-1008 | Cross-site scripting vulnerability in PowerBASIC urlcount.cgi, as included in Lil' HTTP web server, allows remote attackers to execute arbitrary web script in other web browsers via a request to urlcount.cgi that contains the script, which is not filtered when the REPORT capability prints the original request. |
| CVE-2002-1007 | Cross-site scripting vulnerabilities in Blackboard 5 allow remote attackers to execute arbitrary web script via (1) the course_id parameter in a link to login.pl, (2) the CTID parameter in ProcessInfo.cgi, or (3) the Message parameter in index.cgi. |
| CVE-2002-0955 | Cross-site scripting vulnerability in YaBB.cgi for Yet Another Bulletin Board (YaBB) 1 Gold SP1 and earlier allows remote attackers to execute arbitrary script as other web site visitors via script in the num parameter, which is not filtered in the resulting error message. |
| CVE-2002-0948 | Scripts For Educators MakeBook 2.2 CGI program allows remote attackers to execute script as other visitors, or execute server-side includes (SSI) as the web server, via the (1) Name or (2) Email parameters, which are not properly filtered. |
| CVE-2002-0947 | Buffer overflow in rwcgi60 CGI program for Oracle Reports Server 6.0.8.18.0 and earlier, as used in Oracle9iAS and other products, allows remote attackers to execute arbitrary code via a long database name parameter. |
| CVE-2002-0934 | Directory traversal vulnerability in Jon Hedley AlienForm2 (typically installed as af.cgi or alienform.cgi) allows remote attackers to read or modify arbitrary files via an illegal character in the middle of a .. (dot dot) sequence in the parameters (1) _browser_out or (2) _out_file. |
| CVE-2002-0924 | CGIScript.net csNews.cgi allows remote authenticated users to execute arbitrary Perl code via terminating quotes and metacharacters in text fields of the "Advanced Settings" capability. |
| CVE-2002-0923 | CGIScript.net csNews.cgi allows remote authenticated users to read arbitrary files, and possibly gain privileges, via the (1) pheader or (2) pfooter parameters in the "Advanced Settings" capability. |
| CVE-2002-0922 | CGIScript.net csNews.cgi allows remote attackers to obtain database files via a direct URL-encoded request to (1) default%2edb or (2) default%2edb.style, or remote authenticated users to perform administrative actions via (3) a database parameter set to default%2edb. |
| CVE-2002-0921 | CGIScript.net csNews.cgi allows remote attackers to obtain potentially sensitive information, such as the full server pathname and other configuration settings, via the viewnews command with an invalid database, which leaks the information in error messages. |
| CVE-2002-0920 | CGIScript.net csPassword.cgi stores usernames and unencrypted passwords in the password.cgi.tmp temporary file while modifying data, which could allow local users (and possibly remote attackers) to gain privileges by stealing the file before it has been processed. |
| CVE-2002-0919 | CGIScript.net csPassword.cgi allows remote authenticated users to modify the .htaccess file and gain privileges via newlines in the title field of the edit page. |
| CVE-2002-0918 | CGIScript.net csPassword.cgi leaks sensitive information such as the pathname of the server in debug messages that are presented when the script fails, which allows remote attackers to obtain the information via a "remove" option in the command parameter, which generates an error. |
| CVE-2002-0917 | CGIScript.net csPassword.cgi stores .htpasswd files under the web document root, which could allow remote authenticated users to download the file and crack the passwords of other users. |
| CVE-2002-0811 | Bugzilla 2.14 before 2.14.2, and 2.16 before 2.16rc2, may allow remote attackers to cause a denial of service or execute certain queries via a SQL injection attack on the sort order parameter to buglist.cgi. |
| CVE-2002-0809 | Bugzilla 2.14 before 2.14.2, and 2.16 before 2.16rc2, does not properly handle URL-encoded field names that are generated by some browsers, which could cause certain fields to appear to be unset, which has the effect of removing group permissions on bugs when buglist.cgi is provided with the encoded field names. |
| CVE-2002-0807 | Cross-site scripting vulnerabilities in Bugzilla 2.14 before 2.14.2, and 2.16 before 2.16rc2, could allow remote attackers to execute script as other Bugzilla users via the full name (real name) field, which is not properly quoted by editusers.cgi. |
| CVE-2002-0806 | Bugzilla 2.14 before 2.14.2, and 2.16 before 2.16rc2, allows authenticated users with editing privileges to delete other users by directly calling the editusers.cgi script with the "del" option. |
| CVE-2002-0803 | Bugzilla 2.14 before 2.14.2, and 2.16 before 2.16rc2, allows remote attackers to display restricted products and components via a direct HTTP request to queryhelp.cgi. |
| CVE-2002-0789 | Buffer overflow in search.cgi in mnoGoSearch 3.1.19 and earlier allows remote attackers to execute arbitrary code via a long query (q) parameter. |
| CVE-2002-0771 | Cross-site scripting vulnerability in viewcvs.cgi for ViewCVS 0.9.2 allows remote attackers to inject script and steal cookies via the (1) cvsroot or (2) sortby parameters. |
| CVE-2002-0752 | CGIscript.net csMailto.cgi program exports feedback to a file that is accessible from the web document root, which could allow remote attackers to obtain sensitive information by directly accessing the file. |
| CVE-2002-0751 | CGIscript.net csMailto.cgi program allows remote attackers to use csMailto as a "spam proxy" and send mail to arbitrary users via modified (1) form-to, (2) form-from, and (3) form-results parameters. |
| CVE-2002-0750 | CGIscript.net csMailto.cgi program allows remote attackers to read arbitrary files by specifying the target filename in the form-attachment field. |
| CVE-2002-0749 | CGIscript.net csMailto.cgi allows remote attackers to execute arbitrary commands via shell metacharacters in the form-attachment field. |
| CVE-2002-0710 | Directory traversal vulnerability in sendform.cgi 1.44 and earlier allows remote attackers to read arbitrary files by specifying the desired files in the BlurbFilePath parameter. |
| CVE-2002-0612 | FileSeek.cgi allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) head or (2) foot parameters. |
| CVE-2002-0611 | Directory traversal vulnerability in FileSeek.cgi allows remote attackers to read arbitrary files via a ....// (modified dot dot) in the (1) head or (2) foot parameters, which are not properly filtered. |
| CVE-2002-0599 | Blahz-DNS 0.2 and earlier allows remote attackers to bypass authentication and modify configuration by directly requesting CGI programs such as dostuff.php instead of going through the login screen. |
| CVE-2002-0532 | EMU Webmail allows local users to execute arbitrary programs via a .. (dot dot) in the HTTP Host header that points to a Trojan horse configuration file that contains a pageroot specifier that contains shell metacharacters. |
| CVE-2002-0531 | Directory traversal vulnerability in emumail.cgi in EMU Webmail 4.5.x and 5.1.0 allows remote attackers to read arbitrary files or list arbitrary directories via a .. (dot dot) in the type parameter. |
| CVE-2002-0495 | csSearch.cgi in csSearch 2.3 and earlier allows remote attackers to execute arbitrary Perl code via the savesetup command and the setup parameter, which overwrites the setup.cgi configuration file that is loaded by csSearch.cgi. |
| CVE-2002-0492 | dcshop.cgi in DCShop 1.002 Beta allows remote attackers to delete arbitrary setup files via a null character in the database parameter. |
| CVE-2002-0489 | Linux Directory Penguin NsLookup CGI script (nslookup.pl) 1.0 allows remote attackers to execute arbitrary code via shell metacharacters in the (1) query or (2) type parameters. |
| CVE-2002-0488 | Linux Directory Penguin traceroute.pl CGI script 1.0 allows remote attackers to execute arbitrary code via shell metacharacters in the host parameter. |
| CVE-2002-0436 | sscd_suncourier.pl CGI script in the Sun Sunsolve CD pack allows remote attackers to execute arbitrary commands via shell metacharacters in the email address parameter. |
| CVE-2002-0360 | Buffer overflow in Sun AnswerBook2 1.4 through 1.4.3 allows remote attackers to execute arbitrary code via a long filename argument to the gettransbitmap CGI program. |
| CVE-2002-0348 | service.cgi in Cobalt RAQ 4 allows remote attackers to cause a denial of service, and possibly execute arbitrary code, via a long service argument. |
| CVE-2002-0346 | Cross-site scripting vulnerability in Cobalt RAQ 4 allows remote attackers to execute arbitrary script as other Cobalt users via Javascript in a URL to (1) service.cgi or (2) alert.cgi. |
| CVE-2002-0311 | Vulnerability in webtop in UnixWare 7.1.1 and Open UNIX 8.0.0 allows local and possibly remote attackers to gain root privileges via shell metacharacters in the -c argument for (1) in scoadminreg.cgi or (2) service_action.cgi. |
| CVE-2002-0310 | Netwin WebNews 1.1k CGI program includes several default usernames and cleartext passwords that cannot be deleted by the administrator, which allows remote attackers to gain privileges via the username/password combinations (1) testweb/newstest, (2) alwn3845/imaptest, (3) alwi3845/wtest3452, or (4) testweb2/wtest4879. |
| CVE-2002-0290 | Buffer overflow in Netwin WebNews CGI program 1.1, Webnews.exe, allows remote attackers to execute arbitrary code via a long group argument. |
| CVE-2002-0266 | Thunderstone Texis CGI script allows remote attackers to obtain the full path of the web root via a request for a nonexistent file, which generates an error message that includes the full pathname. |
| CVE-2002-0263 | Buffer overflow in EasyBoard 2000 1.27 (aka EZboard) allows remote attackers to execute arbitrary code via a long boundary value in a multipart Content-Type header to (1) ezboard.cgi, (2) ezman.cgi, or (3) ezadmin.cgi. |
| CVE-2002-0249 | PHP for Windows, when installed on Apache 2.0.28 beta as a standalone CGI module, allows remote attackers to obtain the physical path of the php.exe via a request with malformed arguments such as /123, which leaks the pathname in the error message. |
| CVE-2002-0232 | Directory traversal vulnerability in Multi Router Traffic Grapher (MRTG) allows remote attackers to read portions of arbitrary files via a .. (dot dot) in the cfg parameter for (1) 14all.cgi, (2) 14all-1.1.cgi, (3) traffic.cgi, or (4) mrtg.cgi. |
| CVE-2002-0230 | Cross-site scripting vulnerability in fom.cgi of Faq-O-Matic 2.712 allows remote attackers to execute arbitrary Javascript on other clients via the cmd parameter, which causes the script to be inserted into an error message. |
| CVE-2002-0215 | Agora.cgi 3.2r through 4.0 while in debug mode allows remote attackers to determine the full pathname of the agora.cgi file by requesting a non-existent .html file, which leaks the pathname in an error message. |
| CVE-2002-0203 | ttawebtop.cgi in Tarantella Enterprise 3.20 on SPARC Solaris and Linux, and 3.1x and 3.0x including 3.11.903, allows remote attackers to view directory contents via an empty pg parameter. |
| CVE-2002-0199 | Buffer overflow in admin.cgi for Nullsoft Shoutcast Server 1.8.3 allows remote attackers to cause a denial of service and possibly execute arbitrary code via an argument with a large number of backslashes. |
| CVE-2002-0142 | CGI handler in John Roy Pi3Web for Windows 2.0 beta 1 and 2 allows remote attackers to cause a denial of service (crash) via a series of requests whose physical path is exactly 260 characters long and ends in a series of . (dot) characters. |
| CVE-2002-0099 | Buffer overflow in Michael Lamont Savant Web Server 3.0 allows remote attackers to cause a denial of service (crash) via a long HTTP request to the cgi-bin directory in which the CGI program name contains a large number of . (dot) characters. |
| CVE-2002-0098 | Buffer overflow in index.cgi administration interface for Boozt! Standard 0.9.8 allows local users to execute arbitrary code via a long name field when creating a new banner. |
| CVE-2002-0091 | Multiple CGI scripts in CIDER SHADOW 1.5 and 1.6 allows remote attackers to execute arbitrary commands via certain form fields. |
| CVE-2002-0011 | Information leak in doeditvotes.cgi in Bugzilla before 2.14.1 may allow remote attackers to more easily conduct attacks on the login. |
| CVE-2002-0010 | Bugzilla before 2.14.1 allows remote attackers to inject arbitrary SQL code and create files or gain privileges via (1) the sql parameter in buglist.cgi, (2) invalid field names from the "boolean chart" query in buglist.cgi, (3) the mybugslink parameter in userprefs.cgi, (4) a malformed bug ID in the buglist parameter in long_list.cgi, and (5) the value parameter in editusers.cgi, which allows groupset privileges to be modified by attackers with blessgroupset privileges. |
| CVE-2002-0009 | show_bug.cgi in Bugzilla before 2.14.1 allows a user with "Bugs Access" privileges to see other products that are not accessible to the user, by submitting a bug and reading the resulting Product pulldown menu. |
| CVE-2002-0008 | Bugzilla before 2.14.1 allows remote attackers to (1) spoof a user comment via an HTTP request to process_bug.cgi using the "who" parameter, instead of the Bugzilla_login cookie, or (2) post a bug as another user by modifying the reporter parameter to enter_bug.cgi, which is passed to post_bug.cgi. |
| CVE-2001-1586 | Directory traversal vulnerability in SimpleServer:WWW 1.13 and earlier allows remote attackers to execute arbitrary programs via encoded ../ ("%2E%2E%2F%") sequences in a request to the cgi-bin/ directory, a different vulnerability than CVE-2000-0664. |
| CVE-2001-1584 | CardBoard 2.4 greeting card CGI by Michael Barretto allows remote attackers to execute arbitrary commands via shell metacharacters in the recipient field. |
| CVE-2001-1530 | run.cgi in Webmin 0.80 and 0.88 creates temporary files with world-writable permissions, which allows local users to execute arbitrary commands. |
| CVE-2001-1502 | webcart.cgi in Mountain Network Systems WebCart 8.4 allows remote attackers to execute arbitrary commands via shell metacharacters in the NEXTPAGE parameter. |
| CVE-2001-1457 | Buffer overflow in CrazyWWWBoard 2000p4 and 2000LEp5 allows remote attackers to execute arbitrary code via a long HTTP_USER_AGENT CGI environment variable. |
| CVE-2001-1406 | process_bug.cgi in Bugzilla before 2.14 does not set the "groupset" bit when a bug is moved between product groups, which will cause the bug to have the old group's restrictions, which might not be as stringent. |
| CVE-2001-1405 | Bugzilla before 2.14 does not restrict access to sanitycheck.cgi, which allows local users to cause a denial of service (CPU consumption) via a flood of requests to sanitycheck.cgi. |
| CVE-2001-1402 | Bugzilla before 2.14 does not properly escape untrusted parameters, which could allow remote attackers to conduct unauthorized activities via cross-site scripting (CSS) and possibly SQL injection attacks on (1) the product or output form variables for reports.cgi, (2) the voteon, bug_id, and user variables for showvotes.cgi, (3) an invalid email address in createaccount.cgi, (4) an invalid ID in showdependencytree.cgi, (5) invalid usernames and other fields in process_bug.cgi, and (6) error messages in buglist.cgi. |
| CVE-2001-1401 | Bugzilla before 2.14 does not properly restrict access to confidential bugs, which could allow Bugzilla users to bypass viewing permissions via modified bug id parameters in (1) process_bug.cgi, (2) show_activity.cgi, (3) showvotes.cgi, (4) showdependencytree.cgi, (5) showdependencygraph.cgi, (6) showattachment.cgi, or (7) describecomponents.cgi. |
| CVE-2001-1350 | Cross-site scripting vulnerability in namazu.cgi for Namazu 2.0.7 and earlier allows remote attackers to execute arbitrary Javascript as other web users via the lang parameter. |
| CVE-2001-1344 | WSSecurity.pl in WebStore allows remote attackers to bypass authentication by providing the program with a filename that exists, which is made easier by (1) inserting a null character or (2) .. (dot dot). |
| CVE-2001-1343 | ws_mail.cgi in WebStore 400/400CS 4.14 allows remote authenticated WebStore administrators to execute arbitrary code via shell metacharacters in the kill parameter. |
| CVE-2001-1341 | The Beck GmbH IPC@Chip embedded web server installs the chipcfg.cgi program by default, which allows remote attackers to obtain sensitive network information via a request to the program. |
| CVE-2001-1290 | admin.cgi in Active Classifieds Free Edition 1.0, and possibly commercial versions, allows remote attackers to modify the configuration, gain privileges, and execute arbitrary Perl code via the table_width parameter. |
| CVE-2001-1285 | Directory traversal vulnerability in readmail.cgi for Ipswitch IMail 7.04 and earlier allows remote attackers to access the mailboxes of other users via a .. (dot dot) in the mbx parameter. |
| CVE-2001-1283 | The webmail interface for Ipswitch IMail 7.04 and earlier allows remote authenticated users to cause a denial of service (crash) via a mailbox name that contains a large number of . (dot) or other characters to programs such as (1) readmail.cgi or (2) printmail.cgi, possibly due to a buffer overflow that may allow execution of arbitrary code. |
| CVE-2001-1252 | Network Associates PGP Keyserver 7.0 allows remote attackers to bypass authentication and access the administrative web interface via URLs that directly access cgi-bin instead of keyserver/cgi-bin for the programs (1) console, (2) cs, (3) multi_config and (4) directory. |
| CVE-2001-1242 | Directory traversal vulnerability in Un-CGI 1.9 and earlier allows remote attackers to execute arbitrary code via a .. (dot dot) in an HTML form. |
| CVE-2001-1241 | Un-CGI 1.9 and earlier does not verify that a CGI script has the execution bits set before executing it, which allows remote attackers to execute arbitrary commands by directing Un-CGI to a document that begins with "#!" and the desired program name. |
| CVE-2001-1226 | AdCycle 1.17 and earlier allow remote attackers to modify SQL queries, which are not properly sanitized before being passed to the MySQL database. |
| CVE-2001-1224 | get_input in adrotate.pm for Les VanBrunt AdRotate Pro 2.0 allows remote attackers to modify the database and possibly execute arbitrary commands via a SQL code injection attack. |
| CVE-2001-1212 | Cross-site scripting vulnerability in catgy.cgi for Aktivate 1.03 allows remote attackers to execute arbitrary Javascript via the desc parameter. |
| CVE-2001-1211 | Ipswitch IMail 7.0.4 and earlier allows attackers with administrator privileges to read and modify user alias and mailing list information for other domains hosted by the same server via the (1) aliasadmin or (2) listadm1 CGI programs, which do not properly verify that an administrator is the administrator for the target domain. |
| CVE-2001-1209 | Directory traversal vulnerability in zml.cgi allows remote attackers to read arbitrary files via a .. (dot dot) in the file parameter. |
| CVE-2001-1206 | Matrix CGI vault Last Lines 2.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the $error_log variable. |
| CVE-2001-1205 | Directory traversal vulnerability in lastlines.cgi for Last Lines 2.0 allows remote attackers to read arbitrary files via '..' sequences in the $error_log variable. |
| CVE-2001-1199 | Cross-site scripting vulnerability in agora.cgi for Agora 3.0a through 4.0g, when debug mode is enabled, allows remote attackers to execute Javascript on other clients via the cart_id parameter. |
| CVE-2001-1196 | Directory traversal vulnerability in edit_action.cgi of Webmin Directory 0.91 allows attackers to gain privileges via a '..' (dot dot) in the argument. |
| CVE-2001-1187 | csvform.pl 0.1 allows remote attackers to execute arbitrary commands via metacharacters in the file parameter. |
| CVE-2001-1150 | Vulnerability in cgiWebupdate.exe in Trend Micro OfficeScan Corporate Edition (aka Virus Buster) 3.5.2 through 3.5.4 allows remote attackers to read arbitrary files. |
| CVE-2001-1138 | Directory traversal vulnerability in r.pl (aka r.cgi) of Randy Parker Power Up HTML 0.8033beta allows remote attackers to read arbitrary files and possibly execute arbitrary code via a .. (dot dot) in the FILE parameter. |
| CVE-2001-1130 | Sdbsearch.cgi in SuSE Linux 6.0-7.2 could allow remote attackers to execute arbitrary commands by uploading a keylist.txt file that contains filenames with shell metacharacters, then causing the file to be searched using a .. in the HTTP referer (from the HTTP_REFERER variable) to point to the directory that contains the keylist.txt file. |
| CVE-2001-1115 | generate.cgi in SIX-webboard 2.01 and before allows remote attackers to read arbitrary files via a dot dot (..) in the content parameter. |
| CVE-2001-1114 | book.cgi in NetCode NC Book 0.2b allows remote attackers to execute arbitrary commands via shell metacharacters in the "current" parameter. |
| CVE-2001-1100 | sendmessage.cgi in W3Mail 1.0.2, and possibly other CGI programs, allows remote attackers to execute arbitrary commands via shell metacharacters in any field of the 'Compose Message' page. |
| CVE-2001-1074 | Webmin 0.84 and earlier does not properly clear the HTTP_AUTHORIZATION environment variable when the web server is restarted, which makes authentication information available to all CGI programs and allows local users to gain privileges. |
| CVE-2001-1024 | login.gas.bat and other CGI scripts in Entrust getAccess allow remote attackers to execute Java programs, and possibly arbitrary commands, by specifying an alternate -classpath argument. |
| CVE-2001-1019 | Directory traversal vulnerability in view_item CGI program in sglMerchant 1.0 allows remote attackers to read arbitrary files via a .. (dot dot) in the HTML_FILE parameter. |
| CVE-2001-1010 | Directory traversal vulnerability in pagecount CGI script in Sambar Server before 5.0 beta 5 allows remote attackers to overwrite arbitrary files via a .. (dot dot) attack on the page parameter. |
| CVE-2001-0997 | Textor Webmasters Ltd listrec.pl CGI program allows remote attackers to execute arbitrary commands via shell metacharacters in the TEMPLATE parameter. |
| CVE-2001-0995 | PHProjekt before 2.4a allows remote attackers to perform actions as other PHProjekt users by modifying the ID number in an HTTP request to PHProjekt CGI programs. |
| CVE-2001-0992 | shopplus.cgi in ShopPlus shopping cart allows remote attackers to execute arbitrary commands via shell metacharacters in the "file" parameter. |
| CVE-2001-0970 | Cross-site scripting vulnerability in TDForum 1.2 CGI script (tdforum12.cgi) allows remote attackers to execute arbitrary script on other clients via a forum message that contains the script. |
| CVE-2001-0958 | Buffer overflows in eManager plugin for Trend Micro InterScan VirusWall for NT 3.51 and 3.51J allow remote attackers to execute arbitrary code via long arguments to the CGI programs (1) register.dll, (2) ContentFilter.dll, (3) SFNofitication.dll, (4) register.dll, (5) TOP10.dll, (6) SpamExcp.dll, and (7) spamrule.dll. |
| CVE-2001-0949 | Buffer overflows in forms.exe CGI program in ValiCert Enterprise Validation Authority (EVA) Administration Server 3.3 through 4.2.1 allows remote attackers to execute arbitrary code via long arguments to the parameters (1) Mode, (2) Certificate_File, (3) useExpiredCRLs, (4) listenLength, (5) maxThread, (6) maxConnPerSite, (7) maxMsgLen, (8) exitTime, (9) blockTime, (10) nextUpdatePeriod, (11) buildLocal, (12) maxOCSPValidityPeriod, (13) extension, and (14) a particular combination of parameters associated with private key generation that form a string of a certain length. |
| CVE-2001-0947 | Forms.exe CGI program in ValiCert Enterprise Validation Authority (EVA) 3.3 through 4.2.1 allows remote attackers to determine the real pathname of the server by requesting an invalid extension, which produces an error page that includes the path. |
| CVE-2001-0930 | Sendpage.pl allows remote attackers to execute arbitrary commands via a message containing shell metacharacters. |
| CVE-2001-0924 | Directory traversal vulnerability in ifx CGI program in Informix Web DataBlade allows remote attackers to read arbitrary files via a .. (dot dot) in the LO parameter. |
| CVE-2001-0918 | Vulnerabilities in CGI scripts in susehelp in SuSE 7.2 and 7.3 allow remote attackers to execute arbitrary commands by not opening files securely. |
| CVE-2001-0849 | viralator CGI script in Viralator 0.9pre1 and earlier allows remote attackers to execute arbitrary code via a URL for a file being downloaded, which is insecurely passed to a call to wget. |
| CVE-2001-0844 | Vulnerability in (1) Book of guests and (2) Post it! allows remote attackers to execute arbitrary code via shell metacharacters in the email parameter. |
| CVE-2001-0842 | Directory traversal vulnerability in Search.cgi in Leoboard LB5000 LB5000II 1029 and earlier allows remote attackers to overwrite files and gain privileges via .. (dot dot) sequences in the amembernamecookie cookie. |
| CVE-2001-0841 | Directory traversal vulnerability in Search.cgi in Ikonboard ib219 and earlier allows remote attackers to overwrite files and gain privileges via .. (dot dot) sequences in the amembernamecookie cookie. |
| CVE-2001-0839 | ibillpm.pl in iBill password management system generates weak passwords based on a client's MASTER_ACCOUNT, which allows remote attackers to modify account information in the .htpasswd file via brute force password guessing. |
| CVE-2001-0834 | htsearch CGI program in htdig (ht://Dig) 3.1.5 and earlier allows remote attackers to use the -c option to specify an alternate configuration file, which could be used to (1) cause a denial of service (CPU consumption) by specifying a large file such as /dev/zero, or (2) read arbitrary files by uploading an alternate configuration file that specifies the target file. |
| CVE-2001-0821 | The default configuration of DCShop 1.002 beta places sensitive files in the cgi-bin directory, which could allow remote attackers to read sensitive data via an HTTP GET request for (1) orders.txt or (2) auth_user_file.txt. |
| CVE-2001-0805 | Directory traversal vulnerability in ttawebtop.cgi in Tarantella Enterprise 3.00 and 3.01 allows remote attackers to read arbitrary files via a .. (dot dot) in the pg parameter. |
| CVE-2001-0795 | Perception LiteServe 1.25 allows remote attackers to obtain source code of CGI scripts via URLs that contain MS-DOS conventions such as (1) upper case letters or (2) 8.3 file names. |
| CVE-2001-0791 | Trend Micro InterScan VirusWall for Windows NT allows remote attackers to make configuration changes by directly calling certain CGI programs, which do not restrict access. |
| CVE-2001-0780 | Directory traversal vulnerability in cosmicpro.cgi in Cosmicperl Directory Pro 2.0 allows remote attackers to gain sensitive information via a .. (dot dot) in the SHOW parameter. |
| CVE-2001-0689 | Vulnerability in TrendMicro Virus Control System 1.8 allows a remote attacker to view configuration files and change the configuration via a certain CGI program. |
| CVE-2001-0630 | Directory traversal vulnerability in MIMAnet viewsrc.cgi 2.0 allows a remote attacker to read arbitrary files via a '..' (dot dot) attack in the 'loc' variable. |
| CVE-2001-0562 | a1disp.cgi program in Drummond Miles A1Stats prior to 1.6 allows a remote attacker to execute commands via a specially crafted URL which includes shell metacharacters. |
| CVE-2001-0561 | Directory traversal vulnerability in Drummond Miles A1Stats prior to 1.6 allows a remote attacker to read arbitrary files via a '..' (dot dot) attack in (1) a1disp2.cgi, (2) a1disp3.cgi, or (3) a1disp4.cgi. |
| CVE-2001-0476 | Multiple buffer overflows in s.cgi program in Aspseek search engine 1.03 and earlier allow remote attackers to execute arbitrary commands via (1) a long HTTP query string, or (2) a long tmpl parameter. |
| CVE-2001-0463 | Directory traversal vulnerability in cal_make.pl in PerlCal allows remote attackers to read arbitrary files via a .. (dot dot) in the p0 parameter. |
| CVE-2001-0461 | template.cgi in Free On-Line Dictionary of Computing (FOLDOC) allows remote attackers to read files and execute commands via shell metacharacters in the argument to template.cgi. |
| CVE-2001-0436 | dcboard.cgi in DCForum 2000 1.0 allows remote attackers to execute arbitrary commands by uploading a Perl program to the server and using a .. (dot dot) in the AZ parameter to reference the program. |
| CVE-2001-0432 | Buffer overflows in various CGI programs in the remote administration service for Trend Micro Interscan VirusWall 3.01 allow remote attackers to execute arbitrary commands. |
| CVE-2001-0420 | Directory traversal vulnerability in talkback.cgi program allows remote attackers to read arbitrary files via a .. (dot dot) in the article parameter. |
| CVE-2001-0400 | nph-maillist.pl allows remote attackers to execute arbitrary commands via shell metacharacters ("`") in the email address. |
| CVE-2001-0360 | Directory traversal vulnerability in help.cgi in Ikonboard 2.1.7b and earlier allows a remote attacker to read arbitrary files via a .. (dot dot) attack in the helpon parameter. |
| CVE-2001-0333 | Directory traversal vulnerability in IIS 5.0 and earlier allows remote attackers to execute arbitrary commands by encoding .. (dot dot) and "\" characters twice. |
| CVE-2001-0329 | Bugzilla 2.10 allows remote attackers to execute arbitrary commands via shell metacharacters in a username that is then processed by (1) the Bugzilla_login cookie in post_bug.cgi, or (2) the who parameter in process_bug.cgi. |
| CVE-2001-0307 | Bajie HTTP JServer 0.78, and other versions before 0.80, allows remote attackers to execute arbitrary commands via shell metacharacters in an HTTP request for a CGI program that does not exist. |
| CVE-2001-0305 | Directory traversal vulnerability in store.cgi in Thinking Arts ES.One package allows remote attackers to read arbitrary files via a .. (dot dot) in the StartID parameter. |
| CVE-2001-0291 | Buffer overflow in post-query sample CGI program allows remote attackers to execute arbitrary commands via an HTTP POST request that contains at least 10001 parameters. |
| CVE-2001-0271 | mailnews.cgi 1.3 and earlier allows remote attackers to execute arbitrary commands via a user name that contains shell metacharacters. |
| CVE-2001-0253 | Directory traversal vulnerability in hsx.cgi program in iWeb Hyperseek 2000 allows remote attackers to read arbitrary files and directories via a .. (dot dot) attack in the show parameter. |
| CVE-2001-0232 | newsdesk.cgi in News Desk 1.2 allows remote attackers to read arbitrary files via shell metacharacters. |
| CVE-2001-0231 | Directory traversal vulnerability in newsdesk.cgi in News Desk 1.2 allows remote attackers to read arbitrary files via a .. in the "t" parameter. |
| CVE-2001-0224 | Muscat Empower CGI program allows remote attackers to obtain the absolute pathname of the server via an invalid request in the DB parameter. |
| CVE-2001-0217 | Directory traversal vulnerability in PALS Library System pals-cgi program allows remote attackers to read arbitrary files via a .. (dot dot) in the documentName parameter. |
| CVE-2001-0216 | PALS Library System pals-cgi program allows remote attackers to execute arbitrary commands via shell metacharacters in the documentName parameter. |
| CVE-2001-0214 | Way-board CGI program allows remote attackers to read arbitrary files by specifying the filename in the db parameter and terminating the filename with a null byte. |
| CVE-2001-0211 | Directory traversal vulnerability in WebSPIRS 3.1 allows remote attackers to read arbitrary files via a .. (dot dot) attack on the sp.nextform parameter. |
| CVE-2001-0210 | Directory traversal vulnerability in commerce.cgi CGI program allows remote attackers to read arbitrary files via a .. (dot dot) attack in the page parameter. |
| CVE-2001-0200 | HSWeb 2.0 HTTP server allows remote attackers to obtain the physical path of the server via a request to the /cgi/ directory, which will list the path if directory browsing is enabled. |
| CVE-2001-0180 | Lars Ellingsen guestserver.cgi allows remote attackers to execute arbitrary commands via shell metacharacters in the "email" parameter. |
| CVE-2001-0173 | Buffer overflow in qDecoder library 5.08 and earlier, as used in CrazyWWWBoard, CrazySearch, and other CGI programs, allows remote attackers to execute arbitrary commands via a long MIME Content-Type header. |
| CVE-2001-0135 | The default installation of Ultraboard 2000 2.11 creates the Skins, Database, and Backups directories with world-writeable permissions, which could allow local users to modify sensitive information or possibly insert and execute CGI programs. |
| CVE-2001-0133 | The web administration interface for Interscan VirusWall 3.6.x and earlier does not use encryption, which could allow remote attackers to obtain the administrator password to sniff the administrator password via the setpasswd.cgi program or other HTTP GET requests that contain base64 encoded usernames and passwords. |
| CVE-2001-0123 | Directory traversal vulnerability in eXtropia bbs_forum.cgi 1.0 allows remote attackers to read arbitrary files via a .. (dot dot) attack on the file parameter. |
| CVE-2001-0100 | bslist.cgi mailing list script allows remote attackers to execute arbitrary commands via shell metacharacters in the email address. |
| CVE-2001-0099 | bsguest.cgi guestbook script allows remote attackers to execute arbitrary commands via shell metacharacters in the email address. |
| CVE-2001-0086 | CGI Script Center Subscribe Me LITE 2.0 and earlier allows remote attackers to delete arbitrary mailing list users without authentication by directly calling subscribe.pl with the target address as a parameter. |
| CVE-2001-0076 | register.cgi in Ikonboard 2.1.7b and earlier allows remote attackers to execute arbitrary commands via the SEND_MAIL parameter, which overwrites an internal program variable that references a program to be executed. |
| CVE-2001-0075 | Directory traversal vulnerability in main.cgi in Technote allows remote attackers to read arbitrary files via a .. (dot dot) attack in the filename parameter. |
| CVE-2001-0074 | Directory traversal vulnerability in print.cgi in Technote allows remote attackers to read arbitrary files via a .. (dot dot) attack in the board parameter. |
| CVE-2001-0025 | ad.cgi CGI program by Leif Wright allows remote attackers to execute arbitrary commands via shell metacharacters in the file parameter. |
| CVE-2001-0024 | simplestmail.cgi CGI program by Leif Wright allows remote attackers to execute arbitrary commands via shell metacharacters in the MyEmail parameter. |
| CVE-2001-0023 | everythingform.cgi CGI program by Leif Wright allows remote attackers to execute arbitrary commands via shell metacharacters in the config parameter. |
| CVE-2001-0022 | simplestguest.cgi CGI program by Leif Wright allows remote attackers to execute arbitrary commands via shell metacharacters in the guestbook parameter. |
| CVE-2000-1225 | Xitami 2.5b installs the testcgi.exe program by default in the cgi-bin directory, which allows remote attackers to gain sensitive configuration information about the web server by accessing the program. |
| CVE-2000-1223 | quikstore.cgi in Quikstore Shopping Cart allows remote attackers to execute arbitrary commands via shell metacharacters in the URL portion of an HTTP GET request. |
| CVE-2000-1205 | Cross site scripting vulnerabilities in Apache 1.3.0 through 1.3.11 allow remote attackers to execute script as other web site visitors via (1) the printenv CGI (printenv.pl), which does not encode its output, (2) pages generated by the ap_send_error_response function such as a default 404, which does not add an explicit charset, or (3) various messages that are generated by certain Apache modules or core code. NOTE: the printenv issue might still exist for web browsers that can render text/plain content types as HTML, such as Internet Explorer, but CVE regards this as a design limitation of those browsers, not Apache. The printenv.pl/acuparam vector, discloser on 20070724, is one such variant. |
| CVE-2000-1204 | Vulnerability in the mod_vhost_alias virtual hosting module for Apache 1.3.9, 1.3.11 and 1.3.12 allows remote attackers to obtain the source code for CGI programs if the cgi-bin directory is under the document root. |
| CVE-2000-1186 | Buffer overflow in phf CGI program allows remote attackers to execute arbitrary commands by specifying a large number of arguments and including a long MIME header. |
| CVE-2000-1176 | Directory traversal vulnerability in YaBB search.pl CGI script allows remote attackers to read arbitrary files via a .. (dot dot) attack in the "catsearch" form field. |
| CVE-2000-1161 | The installation of AdCycle banner management system leaves the build.cgi program in a web-accessible directory, which allows remote attackers to execute the program and view passwords or delete databases. |
| CVE-2000-1132 | DCForum cgforum.cgi CGI script allows remote attackers to read arbitrary files, and delete the program itself, via a malformed "forum" variable. |
| CVE-2000-1131 | Bill Kendrick web site guestbook (GBook) allows remote attackers to execute arbitrary commands via shell metacharacters in the _MAILTO form variable. |
| CVE-2000-1110 | document.d2w CGI program in the IBM Net.Data db2www package allows remote attackers to determine the physical path of the web server by sending a nonexistent command to the program. |
| CVE-2000-1092 | loadpage.cgi CGI program in EZshopper 3.0 and 2.0 allows remote attackers to list and read files in the EZshopper data directory by inserting a "/" in front of the target filename in the "file" parameter. |
| CVE-2000-1070 | pollit.cgi in Poll It 2.01 and earlier uses data files that are located under the web document root, which allows remote attackers to access sensitive or private information. |
| CVE-2000-1069 | pollit.cgi in Poll It 2.01 and earlier allows remote attackers to access administrative functions without knowing the real password by specifying the same value to the entered_password and admin_password parameters. |
| CVE-2000-1068 | pollit.cgi in Poll It 2.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the poll_options parameter. |
| CVE-2000-1058 | Buffer overflow in OverView5 CGI program in HP OpenView Network Node Manager (NNM) 6.1 and earlier allows remote attackers to cause a denial of service, and possibly execute arbitrary commands, in the SNMP service (snmp.exe), aka the "Java SNMP MIB Browser Object ID parsing problem." |
| CVE-2000-1023 | The Alabanza Control Panel does not require passwords to access administrative commands, which allows remote attackers to modify domain name information via the nsManager.cgi CGI program. |
| CVE-2000-1014 | Format string vulnerability in the search97.cgi CGI script in SCO help http server for Unixware 7 allows remote attackers to execute arbitrary commands via format characters in the queryText parameter. |
| CVE-2000-1005 | Directory traversal vulnerability in html_web_store.cgi and web_store.cgi CGI programs in eXtropia WebStore allows remote attackers to read arbitrary files via a .. (dot dot) attack on the page parameter. |
| CVE-2000-0977 | mailfile.cgi CGI program in MailFile 1.10 allows remote attackers to read arbitrary files by specifying the target file name in the "filename" parameter in a POST request, which is then sent by email to the address specified in the "email" parameter. |
| CVE-2000-0952 | global.cgi CGI program in Global 3.55 and earlier on NetBSD allows remote attackers to execute arbitrary commands via shell metacharacters. |
| CVE-2000-0944 | CGI Script Center News Update 1.1 does not properly validate the original news administration password during a password change operation, which allows remote attackers to modify the password without knowing the original password. |
| CVE-2000-0941 | Kootenay Web KW Whois 1.0 CGI program allows remote attackers to execute arbitrary commands via shell metacharacters in the "whois" parameter. |
| CVE-2000-0940 | Directory traversal vulnerability in Metertek pagelog.cgi allows remote attackers to read arbitrary files via a .. (dot dot) attack on the "name" or "display" parameter. |
| CVE-2000-0924 | Directory traversal vulnerability in search.cgi CGI script in Armada Master Index allows remote attackers to read arbitrary files via a .. (dot dot) attack in the "catigory" parameter. |
| CVE-2000-0923 | authenticate.cgi CGI program in Aplio PRO allows remote attackers to execute arbitrary commands via shell metacharacters in the password parameter. |
| CVE-2000-0922 | Directory traversal vulnerability in Bytes Interactive Web Shopper shopping cart program (shopper.cgi) 2.0 and earlier allows remote attackers to read arbitrary files via a .. (dot dot) attack on the newpage parameter. |
| CVE-2000-0921 | Directory traversal vulnerability in Hassan Consulting shop.cgi shopping cart program allows remote attackers to read arbitrary files via a .. (dot dot) attack on the page parameter. |
| CVE-2000-0912 | MultiHTML CGI script allows remote attackers to read arbitrary files and possibly execute arbitrary commands by specifying the file name to the "multi" parameter. |
| CVE-2000-0906 | Directory traversal vulnerability in Moreover.com cached_feed.cgi script version 4.July.00 allows remote attackers to read arbitrary files via a .. (dot dot) attack on the category or format parameters. |
| CVE-2000-0900 | Directory traversal vulnerability in ssi CGI program in thttpd 2.19 and earlier allows remote attackers to read arbitrary files via a "%2e%2e" string, a variation of the .. (dot dot) attack. |
| CVE-2000-0886 | IIS 5.0 allows remote attackers to execute arbitrary commands via a malformed request for an executable file whose name is appended with operating system commands, aka the "Web Server File Request Parsing" vulnerability. |
| CVE-2000-0878 | The mailto CGI script allows remote attacker to execute arbitrary commands via shell metacharacters in the emailadd form field. |
| CVE-2000-0877 | mailform.pl CGI script in MailForm 2.0 allows remote attackers to read arbitrary files by specifying the file name in the XX-attach_file parameter, which MailForm then sends to the attacker. |
| CVE-2000-0868 | The default configuration of Apache 1.3.12 in SuSE Linux 6.4 allows remote attackers to read source code for CGI scripts by replacing the /cgi-bin/ in the requested URL with /cgi-bin-sdb/. |
| CVE-2000-0835 | search.dll Sambar ISAPI Search utility in Sambar Server 4.4 Beta 3 allows remote attackers to read arbitrary directories by specifying the directory in the query parameter. |
| CVE-2000-0832 | Htgrep CGI program allows remote attackers to read arbitrary files by specifying the full pathname in the hdr parameter. |
| CVE-2000-0782 | netauth.cgi program in Netwin Netauth 4.2e and earlier allows remote attackers to read arbitrary files via a .. (dot dot) attack. |
| CVE-2000-0726 | CGIMail.exe CGI program in Stalkerlab Mailers 1.1.2 allows remote attackers to read arbitrary files by specifying the file in the $Attach$ hidden form variable. |
| CVE-2000-0720 | news.cgi in GWScripts News Publisher does not properly authenticate requests to add an author to the author index, which allows remote attackers to add new authors by directly posting an HTTP request to the new.cgi program with an addAuthor parameter, and setting the Referer to the news.cgi program. |
| CVE-2000-0696 | The administration interface for the dwhttpd web server in Solaris AnswerBook2 does not properly authenticate requests to its supporting CGI scripts, which allows remote attackers to add user accounts to the interface by directly calling the admin CGI script. |
| CVE-2000-0690 | Auction Weaver CGI script 1.02 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in the fromfile parameter. |
| CVE-2000-0689 | Account Manager LITE does not properly authenticate attempts to change the administrator password, which allows remote attackers to gain privileges for the Account Manager by directly calling the amadmin.pl script with the setpasswd parameter. |
| CVE-2000-0688 | Subscribe Me LITE does not properly authenticate attempts to change the administrator password, which allows remote attackers to gain privileges for the Account Manager by directly calling the subscribe.pl script with the setpwd parameter. |
| CVE-2000-0687 | Auction Weaver CGI script 1.03 and earlier allows remote attackers to read arbitrary files via a .. (dot dot) attack in the catdir parameter. |
| CVE-2000-0686 | Auction Weaver CGI script 1.03 and earlier allows remote attackers to read arbitrary files via a .. (dot dot) attack in the fromfile parameter. |
| CVE-2000-0677 | Buffer overflow in IBM Net.Data db2www CGI program allows remote attackers to execute arbitrary commands via a long PATH_INFO environmental variable. |
| CVE-2000-0674 | ftp.pl CGI program for Virtual Visions FTP browser allows remote attackers to read directories outside of the document root via a .. (dot dot) attack. |
| CVE-2000-0670 | The cvsweb CGI script in CVSWeb 1.80 allows remote attackers with write access to a CVS repository to execute arbitrary commands via shell metacharacters. |
| CVE-2000-0639 | The default configuration of Big Brother 1.4h2 and earlier does not include proper access restrictions, which allows remote attackers to execute arbitrary commands by using bbd to upload a file whose extension will cause it to be executed as a CGI script by the web server. |
| CVE-2000-0627 | BlackBoard CourseInfo 4.0 does not properly authenticate users, which allows local users to modify CourseInfo database information and gain privileges by directly calling the supporting CGI programs such as user_update_passwd.pl and user_update_admin.pl. |
| CVE-2000-0622 | Buffer overflow in Webfind CGI program in O'Reilly WebSite Professional web server 2.x allows remote attackers to execute arbitrary commands via a URL containing a long "keywords" parameter. |
| CVE-2000-0590 | Poll It 2.0 CGI script allows remote attackers to read arbitrary files by specifying the file name in the data_dir parameter. |
| CVE-2000-0588 | SawMill 5.0.21 CGI program allows remote attackers to read the first line of arbitrary files by listing the file in the rfcf parameter, whose contents SawMill attempts to parse as configuration commands. |
| CVE-2000-0564 | The guestbook CGI program in ICQ Web Front service for ICQ 2000a, 99b, and others allows remote attackers to cause a denial of service via a URL with a long name parameter. |
| CVE-2000-0527 | userreg.cgi CGI program in MailStudio 2000 2.0 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters. |
| CVE-2000-0526 | mailview.cgi CGI program in MailStudio 2000 2.0 and earlier allows remote attackers to read arbitrary files via a .. (dot dot) attack. |
| CVE-2000-0521 | Savant web server allows remote attackers to read source code of CGI scripts via a GET request that does not include the HTTP version number. |
| CVE-2000-0511 | CUPS (Common Unix Printing System) 1.04 and earlier allows remote attackers to cause a denial of service via a CGI POST request. |
| CVE-2000-0473 | Buffer overflow in AnalogX SimpleServer 1.05 allows a remote attacker to cause a denial of service via a long GET request for a program in the cgi-bin directory. |
| CVE-2000-0469 | Selena Sol WebBanner 4.0 allows remote attackers to read arbitrary files via a .. (dot dot) attack. |
| CVE-2000-0435 | The allmanageup.pl file upload CGI script in the Allmanage Website administration software 2.6 can be called directly by remote attackers, which allows them to modify user accounts or web pages. |
| CVE-2000-0424 | The CGI counter 4.0.7 by George Burgyan allows remote attackers to execute arbitrary commands via shell metacharacters. |
| CVE-2000-0423 | Buffer overflow in Netwin DNEWSWEB CGI program allows remote attackers to execute arbitrary commands via long parameters such as group, cmd, and utag. |
| CVE-2000-0422 | Buffer overflow in Netwin DMailWeb CGI program allows remote attackers to execute arbitrary commands via a long utoken parameter. |
| CVE-2000-0421 | The process_bug.cgi script in Bugzilla allows remote attackers to execute arbitrary commands via shell metacharacters. |
| CVE-2000-0411 | Matt Wright's FormMail CGI script allows remote attackers to obtain environmental variables via the env_report parameter. |
| CVE-2000-0381 | The Gossamer Threads DBMan db.cgi CGI script allows remote attackers to view environmental variables and setup information by referencing a non-existing database in the db parameter. |
| CVE-2000-0332 | UltraBoard.pl or UltraBoard.cgi CGI scripts in UltraBoard 1.6 allows remote attackers to read arbitrary files via a pathname string that includes a dot dot (..) and ends with a null byte. |
| CVE-2000-0322 | The passwd.php3 CGI script in the Red Hat Piranha Virtual Server Package allows local users to execute arbitrary commands via shell metacharacters. |
| CVE-2000-0288 | Infonautics getdoc.cgi allows remote attackers to bypass the payment phase for accessing documents via a modified form variable. |
| CVE-2000-0287 | The BizDB CGI script bizdb-search.cgi allows remote attackers to execute arbitrary commands via shell metacharacters in the dbname parameter. |
| CVE-2000-0282 | TalentSoft webpsvr daemon in the Web+ shopping cart application allows remote attackers to read arbitrary files via a .. (dot dot) attack on the webplus CGI program. |
| CVE-2000-0255 | The Nbase-Xyplex EdgeBlaster router allows remote attackers to cause a denial of service via a scan for the FormMail CGI program. |
| CVE-2000-0243 | AnalogX SimpleServer:WWW HTTP server 1.03 allows remote attackers to cause a denial of service via a short GET request to cgi-bin. |
| CVE-2000-0213 | The Sambar server includes batch files ECHO.BAT and HELLO.BAT in the CGI directory, which allow remote attackers to execute commands via shell metacharacters. |
| CVE-2000-0208 | The htdig (ht://Dig) CGI program htsearch allows remote attackers to read arbitrary files by enclosing the file name with backticks (`) in parameters to htsearch. |
| CVE-2000-0207 | SGI InfoSearch CGI program infosrch.cgi allows remote attackers to execute commands via shell metacharacters. |
| CVE-2000-0192 | The default installation of Caldera OpenLinux 2.3 includes the CGI program rpm_query, which allows remote attackers to determine what packages are installed on the system. |
| CVE-2000-0188 | EZShopper 3.0 search.cgi CGI script allows remote attackers to read arbitrary files via a .. (dot dot) attack or execute commands via shell metacharacters. |
| CVE-2000-0187 | EZShopper 3.0 loadpage.cgi CGI script allows remote attackers to read arbitrary files via a .. (dot dot) attack or execute commands via shell metacharacters. |
| CVE-2000-0177 | DNSTools CGI applications allow remote attackers to execute arbitrary commands via shell metacharacters. |
| CVE-2000-0149 | Zeus web server allows remote attackers to view the source code for CGI programs via a null character (%00) at the end of a URL. |
| CVE-2000-0122 | Frontpage Server Extensions allows remote attackers to determine the physical path of a virtual directory via a GET request to the htimage.exe CGI program. |
| CVE-2000-0117 | The siteUserMod.cgi program in Cobalt RaQ2 servers allows any Site Administrator to modify passwords for other users, site administrators, and possibly admin (root). |
| CVE-2000-0074 | PowerScripts PlusMail CGI program allows remote attackers to execute commands via a password file with improper permissions. |
| CVE-2000-0064 | cgiproc CGI script in Nortel Contivity HTTP server allows remote attackers to cause a denial of service via a malformed URL that includes shell metacharacters. |
| CVE-2000-0063 | cgiproc CGI script in Nortel Contivity HTTP server allows remote attackers to read arbitrary files by specifying the filename in a parameter to the script. |
| CVE-2000-0056 | IMail IMONITOR status.cgi CGI script allows remote attackers to cause a denial of service with many calls to status.cgi. |
| CVE-2000-0054 | search.cgi in the SolutionScripts Home Free package allows remote attackers to view directories via a .. (dot dot) attack. |
| CVE-2000-0039 | AltaVista search engine allows remote attackers to read files above the document root via a .. (dot dot) in the query.cgi CGI program. |
| CVE-2000-0025 | IIS 4.0 and Site Server 3.0 allow remote attackers to read source code for ASP files if the file is in a virtual directory whose name includes extensions such as .com, .exe, .sh, .cgi, or .dll, aka the "Virtual Directory Naming" vulnerability. |
| CVE-2000-0023 | Buffer overflow in Lotus Domino HTTP server allows remote attackers to cause a denial of service via a long URL. |
| CVE-2000-0022 | Lotus Domino HTTP server does not properly disable anonymous access for the cgi-bin directory. |
| CVE-2000-0021 | Lotus Domino HTTP server allows remote attackers to determine the real path of the server via a request to a non-existent script in /cgi-bin. |
| CVE-2000-0012 | Buffer overflow in w3-msql CGI program in miniSQL package allows remote attackers to execute commands. |
| CVE-2000-0010 | WebWho+ whois.cgi program allows remote attackers to execute commands via shell metacharacters in the TLD parameter. |
| CVE-1999-1590 | Directory traversal vulnerability in Muhammad A. Muquit wwwcount (Count.cgi) 2.3 allows remote attackers to read arbitrary GIF files via ".." sequences in the image parameter, a different vulnerability than CVE-1999-0021. |
| CVE-1999-1550 | bigconf.conf in F5 BIG/ip 2.1.2 and earlier allows remote attackers to read arbitrary files by specifying the target file in the "file" parameter. |
| CVE-1999-1469 | Buffer overflow in w3-auth CGI program in miniSQL package allows remote attackers to execute arbitrary commands via an HTTP request with (1) a long URL, or (2) a long User-Agent MIME header. |
| CVE-1999-1462 | Vulnerability in bb-hist.sh CGI History module in Big Brother 1.09b and 1.09c allows remote attackers to read portions of arbitrary files. |
| CVE-1999-1436 | Ray Chan WWW Authorization Gateway 0.1 CGI program allows remote attackers to execute arbitrary commands via shell metacharacters in the "user" parameter. |
| CVE-1999-1412 | A possible interaction between Apple MacOS X release 1.0 and Apache HTTP server allows remote attackers to cause a denial of service (crash) via a flood of HTTP GET requests to CGI programs, which generates a large number of processes. |
| CVE-1999-1381 | Buffer overflow in dbadmin CGI program 1.0.1 on Linux allows remote attackers to execute arbitrary commands. |
| CVE-1999-1378 | dbmlparser.exe CGI guestbook program does not perform a chroot operation properly, which allows remote attackers to read arbitrary files. |
| CVE-1999-1377 | Matt Wright's download.cgi 1.0 allows remote attackers to read arbitrary files via a .. (dot dot) in the f parameter. |
| CVE-1999-1374 | perlshop.cgi shopping cart program stores sensitive customer information in directories and files that are under the web root, which allows remote attackers to obtain that information via an HTTP request. |
| CVE-1999-1357 | Netscape Communicator 4.04 through 4.7 (and possibly other versions) in various UNIX operating systems converts the 0x8b character to a "<" sign, and the 0x9b character to a ">" sign, which could allow remote attackers to attack other clients via cross-site scripting (CSS) in CGI programs that do not filter these characters. |
| CVE-1999-1281 | Development version of Breeze Network Server allows remote attackers to cause the system to reboot by accessing the configbreeze CGI program. |
| CVE-1999-1278 | nlog CGI scripts do not properly filter shell metacharacters from the IP address argument, which could allow remote attackers to execute certain commands via (1) nlog-smb.pl or (2) rpc-nlog.pl. |
| CVE-1999-1255 | Hyperseek allows remote attackers to modify the hyperseek configuration by directly calling the admin.cgi program with an edit_file action parameter. |
| CVE-1999-1250 | Vulnerability in CGI program in the Lasso application by Blue World, as used on WebSTAR and other servers, allows remote attackers to read arbitrary files. |
| CVE-1999-1189 | Buffer overflow in Netscape Navigator/Communicator 4.7 for Windows 95 and Windows 98 allows remote attackers to cause a denial of service, and possibly execute arbitrary commands, via a long argument after the ? character in a URL that references an .asp, .cgi, .html, or .pl file. |
| CVE-1999-1179 | Vulnerability in man.sh CGI script, included in May 1998 issue of SysAdmin Magazine, allows remote attackers to execute arbitrary commands. |
| CVE-1999-1155 | LakeWeb Mail List CGI script allows remote attackers to execute arbitrary commands via shell metacharacters in the recipient email address. |
| CVE-1999-1154 | LakeWeb Filemail CGI script allows remote attackers to execute arbitrary commands via shell metacharacters in the recipient email address. |
| CVE-1999-1153 | HAMcards Postcard CGI script 1.0 allows remote attackers to execute arbitrary commands via shell metacharacters in the recipient email address. |
| CVE-1999-1072 | Excite for Web Servers (EWS) 1.1 allows local users to gain privileges by obtaining the encrypted password from the world-readable Architext.conf authentication file and replaying the encrypted password in an HTTP request to AT-generated.cgi or AT-admin.cgi. |
| CVE-1999-1070 | Buffer overflow in ping CGI program in Xylogics Annex terminal service allows remote attackers to cause a denial of service via a long query parameter. |
| CVE-1999-1067 | SGI MachineInfo CGI program, installed by default on some web servers, prints potentially sensitive system status information, which could be used by remote attackers for information gathering activities. |
| CVE-1999-1063 | CDomain whois_raw.cgi whois CGI script allows remote attackers to execute arbitrary commands via shell metacharacters in the fqdn parameter. |
| CVE-1999-1051 | Default configuration in Matt Wright FormHandler.cgi script allows arbitrary directories to be used for attachments, and only restricts access to the /etc/ directory, which allows remote attackers to read arbitrary files via the reply_message_attach attachment parameter. |
| CVE-1999-1050 | Directory traversal vulnerability in Matt Wright FormHandler.cgi script allows remote attackers to read arbitrary files via (1) a .. (dot dot) in the reply_message_attach attachment parameter, or (2) by specifying the filename as a template. |
| CVE-1999-0985 | CC Whois program whois.cgi allows remote attackers to execute commands via shell metacharacters in the domain entry. |
| CVE-1999-0984 | Matt's Whois program whois.cgi allows remote attackers to execute commands via shell metacharacters in the domain entry. |
| CVE-1999-0983 | Whois Internic Lookup program whois.cgi allows remote attackers to execute commands via shell metacharacters in the domain entry. |
| CVE-1999-0951 | Buffer overflow in OmniHTTPd CGI program imagemap.exe allows remote attackers to execute commands. |
| CVE-1999-0947 | AN-HTTPd provides example CGI scripts test.bat, input.bat, input2.bat, and envout.bat, which allow remote attackers to execute commands via shell metacharacters. |
| CVE-1999-0937 | BNBForm allows remote attackers to read arbitrary files via the automessage hidden form variable. |
| CVE-1999-0936 | BNBSurvey survey.cgi program allows remote attackers to execute commands via shell metacharacters. |
| CVE-1999-0935 | classifieds.cgi allows remote attackers to execute arbitrary commands by specifying them in a hidden variable in a CGI form. |
| CVE-1999-0934 | classifieds.cgi allows remote attackers to read arbitrary files via shell metacharacters. |
| CVE-1999-0913 | dfire.cgi script in Dragon-Fire IDS allows remote users to execute commands via shell metacharacters. |
| CVE-1999-0854 | Ultimate Bulletin Board stores data files in the cgi-bin directory, allowing remote attackers to view the data if an error occurs when the HTTP server attempts to execute the file. |
| CVE-1999-0753 | The w3-msql CGI script provided with Mini SQL allows remote attackers to view restricted directories. |
| CVE-1999-0710 | The Squid package in Red Hat Linux 5.2 and 6.0, and other distributions, installs cachemgr.cgi in a public web directory, which allows remote attackers to use it as an intermediary to connect to other systems. |
| CVE-1999-0610 | An incorrect configuration of the Webcart CGI program could disclose private information. |
| CVE-1999-0609 | An incorrect configuration of the SoftCart CGI program "SoftCart.exe" could disclose private information. |
| CVE-1999-0608 | An incorrect configuration of the PDG Shopping Cart CGI program "shopper.cgi" could disclose private information. |
| CVE-1999-0607 | quikstore.cgi in QuikStore shopping cart stores quikstore.cfg under the web document root with insufficient access control, which allows remote attackers to obtain the cleartext administrator password and gain privileges. |
| CVE-1999-0606 | An incorrect configuration of the EZMall 2000 shopping cart CGI program "mall2000.cgi" could disclose private information. |
| CVE-1999-0605 | An incorrect configuration of the Order Form 1.0 shopping cart CGI program could disclose private information. |
| CVE-1999-0604 | An incorrect configuration of the WebStore 1.0 shopping cart CGI program "web_store.cgi" could disclose private information. |
| CVE-1999-0509 | Perl, sh, csh, or other shell interpreters are installed in the cgi-bin directory on a WWW site, which allows remote attackers to execute arbitrary commands. |
| CVE-1999-0467 | The Webcom CGI Guestbook programs wguest.exe and rguest.exe allow a remote attacker to read arbitrary files using the "template" parameter. |
| CVE-1999-0346 | CGI PHP mlog script allows an attacker to read any file on the target server. |
| CVE-1999-0287 | Vulnerability in the Wguest CGI program. |
| CVE-1999-0283 | The Java Web Server would allow remote users to obtain the source code for CGI programs. |
| CVE-1999-0279 | Excite for Web Servers (EWS) allows remote command execution via shell metacharacters. |
| CVE-1999-0270 | Directory traversal vulnerability in pfdispaly.cgi program (sometimes referred to as "pfdisplay") for SGI's Performer API Search Tool (performer_tools) allows remote attackers to read arbitrary files. |
| CVE-1999-0266 | The info2www CGI script allows remote file access or remote command execution. |
| CVE-1999-0264 | htmlscript CGI program allows remote read access to files. |
| CVE-1999-0262 | Hylafax faxsurvey CGI script on Linux allows remote attackers to execute arbitrary commands via shell metacharacters in the query string. |
| CVE-1999-0260 | The jj CGI program allows command execution via shell metacharacters. |
| CVE-1999-0238 | php.cgi allows attackers to read any file on the system. |
| CVE-1999-0237 | Remote execution of arbitrary commands through Guestbook CGI program. |
| CVE-1999-0236 | ScriptAlias directory in NCSA and Apache httpd allowed attackers to read CGI programs. |
| CVE-1999-0191 | IIS newdsn.exe CGI script allows remote users to overwrite files. |
| CVE-1999-0174 | The view-source CGI program allows remote attackers to read arbitrary files via a .. (dot dot) attack. |
| CVE-1999-0173 | FormMail CGI program can be used by web servers other than the host server that the program resides on. |
| CVE-1999-0172 | FormMail CGI program allows remote execution of commands. |
| CVE-1999-0149 | The wrap CGI program in IRIX allows remote attackers to view arbitrary directory listings via a .. (dot dot) attack. |
| CVE-1999-0148 | The handler CGI program in IRIX allows arbitrary command execution. |
| CVE-1999-0147 | The aglimpse CGI program of the Glimpse package allows remote execution of arbitrary commands. |
| CVE-1999-0146 | The campas CGI program provided with some NCSA web servers allows an attacker to execute arbitrary commands via encoded carriage return characters in the query string, as demonstrated by reading the password file. |
| CVE-1999-0070 | test-cgi program allows an attacker to list files on the server. |
| CVE-1999-0068 | CGI PHP mylog script allows an attacker to read any file on the target server. |
| CVE-1999-0067 | phf CGI program allows remote command execution through shell metacharacters. |
| CVE-1999-0066 | AnyForm CGI remote execution. |
| CVE-1999-0058 | Buffer overflow in PHP cgi program, php.cgi allows shell access. |
| CVE-1999-0045 | List of arbitrary files on Web host via nph-test-cgi script. |
| CVE-1999-0039 | webdist CGI program (webdist.cgi) in SGI IRIX allows remote attackers to execute arbitrary commands via shell metacharacters in the distloc parameter. |
| CVE-1999-0021 | Arbitrary command execution via buffer overflow in Count.cgi (wwwcount) cgi-bin program. |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
