Search Results
There are 381 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2024-3745 | MSI Afterburner v4.6.6.16381 Beta 3 is vulnerable to an ACL Bypass vulnerability in the RTCore64.sys driver, which leads to triggering vulnerabilities like CVE-2024-1443 and CVE-2024-1460 from a low privileged user. |
| CVE-2024-35855 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix possible use-after-free during activity update The rule activity update delayed work periodically traverses the list of configured rules and queries their activity from the device. As part of this task it accesses the entry pointed by 'ventry->entry', but this entry can be changed concurrently by the rehash delayed work, leading to a use-after-free [1]. Fix by closing the race and perform the activity query under the 'vregion->lock' mutex. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 Read of size 8 at addr ffff8881054ed808 by task kworker/0:18/181 CPU: 0 PID: 181 Comm: kworker/0:18 Not tainted 6.9.0-rc2-custom-00781-gd5ab772d32f7 #2 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 mlxsw_sp_acl_rule_activity_update_work+0x219/0x400 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_entry_create+0x7b/0x1f0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x30d/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3d7/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 |
| CVE-2024-35854 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash The rehash delayed work migrates filters from one region to another according to the number of available credits. The migrated from region is destroyed at the end of the work if the number of credits is non-negative as the assumption is that this is indicative of migration being complete. This assumption is incorrect as a non-negative number of credits can also be the result of a failed migration. The destruction of a region that still has filters referencing it can result in a use-after-free [1]. Fix by not destroying the region if migration failed. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 Read of size 8 at addr ffff8881735319e8 by task kworker/0:31/3858 CPU: 0 PID: 3858 Comm: kworker/0:31 Tainted: G W 6.9.0-rc2-custom-00782-gf2275c2157d8 #5 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 mlxsw_sp_acl_ctcam_entry_del+0x2e/0x70 mlxsw_sp_acl_atcam_entry_del+0x81/0x210 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3cd/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 174: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_region_create+0xdf/0x9c0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x954/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 7: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_region_destroy+0x272/0x310 mlxsw_sp_acl_tcam_vregion_rehash_work+0x731/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 |
| CVE-2024-35853 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix memory leak during rehash The rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. If the migration fails, the code tries to migrate the filters back to the old region. However, the rollback itself can also fail in which case another migration will be erroneously performed. Besides the fact that this ping pong is not a very good idea, it also creates a problem. Each virtual chunk references two chunks: The currently used one ('vchunk->chunk') and a backup ('vchunk->chunk2'). During migration the first holds the chunk we want to migrate filters to and the second holds the chunk we are migrating filters from. The code currently assumes - but does not verify - that the backup chunk does not exist (NULL) if the currently used chunk does not reference the target region. This assumption breaks when we are trying to rollback a rollback, resulting in the backup chunk being overwritten and leaked [1]. Fix by not rolling back a failed rollback and add a warning to avoid future cases. [1] WARNING: CPU: 5 PID: 1063 at lib/parman.c:291 parman_destroy+0x17/0x20 Modules linked in: CPU: 5 PID: 1063 Comm: kworker/5:11 Tainted: G W 6.9.0-rc2-custom-00784-gc6a05c468a0b #14 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:parman_destroy+0x17/0x20 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_region_fini+0x19/0x60 mlxsw_sp_acl_tcam_region_destroy+0x49/0xf0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x1f1/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> |
| CVE-2024-35852 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix memory leak when canceling rehash work The rehash delayed work is rescheduled with a delay if the number of credits at end of the work is not negative as supposedly it means that the migration ended. Otherwise, it is rescheduled immediately. After "mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash" the above is no longer accurate as a non-negative number of credits is no longer indicative of the migration being done. It can also happen if the work encountered an error in which case the migration will resume the next time the work is scheduled. The significance of the above is that it is possible for the work to be pending and associated with hints that were allocated when the migration started. This leads to the hints being leaked [1] when the work is canceled while pending as part of ACL region dismantle. Fix by freeing the hints if hints are associated with a work that was canceled while pending. Blame the original commit since the reliance on not having a pending work associated with hints is fragile. [1] unreferenced object 0xffff88810e7c3000 (size 256): comm "kworker/0:16", pid 176, jiffies 4295460353 hex dump (first 32 bytes): 00 30 95 11 81 88 ff ff 61 00 00 00 00 00 00 80 .0......a....... 00 00 61 00 40 00 00 00 00 00 00 00 04 00 00 00 ..a.@........... backtrace (crc 2544ddb9): [<00000000cf8cfab3>] kmalloc_trace+0x23f/0x2a0 [<000000004d9a1ad9>] objagg_hints_get+0x42/0x390 [<000000000b143cf3>] mlxsw_sp_acl_erp_rehash_hints_get+0xca/0x400 [<0000000059bdb60a>] mlxsw_sp_acl_tcam_vregion_rehash_work+0x868/0x1160 [<00000000e81fd734>] process_one_work+0x59c/0xf20 [<00000000ceee9e81>] worker_thread+0x799/0x12c0 [<00000000bda6fe39>] kthread+0x246/0x300 [<0000000070056d23>] ret_from_fork+0x34/0x70 [<00000000dea2b93e>] ret_from_fork_asm+0x1a/0x30 |
| CVE-2024-31208 | Synapse is an open-source Matrix homeserver. A remote Matrix user with malicious intent, sharing a room with Synapse instances before 1.105.1, can dispatch specially crafted events to exploit a weakness in the V2 state resolution algorithm. This can induce high CPU consumption and accumulate excessive data in the database of such instances, resulting in a denial of service. Servers in private federations, or those that do not federate, are not affected. Server administrators should upgrade to 1.105.1 or later. Some workarounds are available. One can ban the malicious users or ACL block servers from the rooms and/or leave the room and purge the room using the admin API. |
| CVE-2024-27309 | While an Apache Kafka cluster is being migrated from ZooKeeper mode to KRaft mode, in some cases ACLs will not be correctly enforced. Two preconditions are needed to trigger the bug: 1. The administrator decides to remove an ACL 2. The resource associated with the removed ACL continues to have two or more other ACLs associated with it after the removal. When those two preconditions are met, Kafka will treat the resource as if it had only one ACL associated with it after the removal, rather than the two or more that would be correct. The incorrect condition is cleared by removing all brokers in ZK mode, or by adding a new ACL to the affected resource. Once the migration is completed, there is no metadata loss (the ACLs all remain). The full impact depends on the ACLs in use. If only ALLOW ACLs were configured during the migration, the impact would be limited to availability impact. if DENY ACLs were configured, the impact could include confidentiality and integrity impact depending on the ACLs configured, as the DENY ACLs might be ignored due to this vulnerability during the migration period. |
| CVE-2024-26907 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix fortify source warning while accessing Eth segment ------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_ ---truncated--- |
| CVE-2024-26870 | In the Linux kernel, the following vulnerability has been resolved: NFSv4.2: fix nfs4_listxattr kernel BUG at mm/usercopy.c:102 A call to listxattr() with a buffer size = 0 returns the actual size of the buffer needed for a subsequent call. When size > 0, nfs4_listxattr() does not return an error because either generic_listxattr() or nfs4_listxattr_nfs4_label() consumes exactly all the bytes then size is 0 when calling nfs4_listxattr_nfs4_user() which then triggers the following kernel BUG: [ 99.403778] kernel BUG at mm/usercopy.c:102! [ 99.404063] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 99.408463] CPU: 0 PID: 3310 Comm: python3 Not tainted 6.6.0-61.fc40.aarch64 #1 [ 99.415827] Call trace: [ 99.415985] usercopy_abort+0x70/0xa0 [ 99.416227] __check_heap_object+0x134/0x158 [ 99.416505] check_heap_object+0x150/0x188 [ 99.416696] __check_object_size.part.0+0x78/0x168 [ 99.416886] __check_object_size+0x28/0x40 [ 99.417078] listxattr+0x8c/0x120 [ 99.417252] path_listxattr+0x78/0xe0 [ 99.417476] __arm64_sys_listxattr+0x28/0x40 [ 99.417723] invoke_syscall+0x78/0x100 [ 99.417929] el0_svc_common.constprop.0+0x48/0xf0 [ 99.418186] do_el0_svc+0x24/0x38 [ 99.418376] el0_svc+0x3c/0x110 [ 99.418554] el0t_64_sync_handler+0x120/0x130 [ 99.418788] el0t_64_sync+0x194/0x198 [ 99.418994] Code: aa0003e3 d000a3e0 91310000 97f49bdb (d4210000) Issue is reproduced when generic_listxattr() returns 'system.nfs4_acl', thus calling lisxattr() with size = 16 will trigger the bug. Add check on nfs4_listxattr() to return ERANGE error when it is called with size > 0 and the return value is greater than size. |
| CVE-2024-26743 | In the Linux kernel, the following vulnerability has been resolved: RDMA/qedr: Fix qedr_create_user_qp error flow Avoid the following warning by making sure to free the allocated resources in case that qedr_init_user_queue() fail. -----------[ cut here ]----------- WARNING: CPU: 0 PID: 143192 at drivers/infiniband/core/rdma_core.c:874 uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Modules linked in: tls target_core_user uio target_core_pscsi target_core_file target_core_iblock ib_srpt ib_srp scsi_transport_srp nfsd nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs 8021q garp mrp stp llc ext4 mbcache jbd2 opa_vnic ib_umad ib_ipoib sunrpc rdma_ucm ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm hfi1 intel_rapl_msr intel_rapl_common mgag200 qedr sb_edac drm_shmem_helper rdmavt x86_pkg_temp_thermal drm_kms_helper intel_powerclamp ib_uverbs coretemp i2c_algo_bit kvm_intel dell_wmi_descriptor ipmi_ssif sparse_keymap kvm ib_core rfkill syscopyarea sysfillrect video sysimgblt irqbypass ipmi_si ipmi_devintf fb_sys_fops rapl iTCO_wdt mxm_wmi iTCO_vendor_support intel_cstate pcspkr dcdbas intel_uncore ipmi_msghandler lpc_ich acpi_power_meter mei_me mei fuse drm xfs libcrc32c qede sd_mod ahci libahci t10_pi sg crct10dif_pclmul crc32_pclmul crc32c_intel qed libata tg3 ghash_clmulni_intel megaraid_sas crc8 wmi [last unloaded: ib_srpt] CPU: 0 PID: 143192 Comm: fi_rdm_tagged_p Kdump: loaded Not tainted 5.14.0-408.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 2.14.0 01/25/2022 RIP: 0010:uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Code: 5d 41 5c 41 5d 41 5e e9 0f 26 1b dd 48 89 df e8 67 6a ff ff 49 8b 86 10 01 00 00 48 85 c0 74 9c 4c 89 e7 e8 83 c0 cb dd eb 92 <0f> 0b eb be 0f 0b be 04 00 00 00 48 89 df e8 8e f5 ff ff e9 6d ff RSP: 0018:ffffb7c6cadfbc60 EFLAGS: 00010286 RAX: ffff8f0889ee3f60 RBX: ffff8f088c1a5200 RCX: 00000000802a0016 RDX: 00000000802a0017 RSI: 0000000000000001 RDI: ffff8f0880042600 RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8f11fffd5000 R11: 0000000000039000 R12: ffff8f0d5b36cd80 R13: ffff8f088c1a5250 R14: ffff8f1206d91000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8f11d7c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000147069200e20 CR3: 00000001c7210002 CR4: 00000000001706f0 Call Trace: <TASK> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? ib_uverbs_close+0x1f/0xb0 [ib_uverbs] ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? __warn+0x81/0x110 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? report_bug+0x10a/0x140 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ib_uverbs_close+0x1f/0xb0 [ib_uverbs] __fput+0x94/0x250 task_work_run+0x5c/0x90 do_exit+0x270/0x4a0 do_group_exit+0x2d/0x90 get_signal+0x87c/0x8c0 arch_do_signal_or_restart+0x25/0x100 ? ib_uverbs_ioctl+0xc2/0x110 [ib_uverbs] exit_to_user_mode_loop+0x9c/0x130 exit_to_user_mode_prepare+0xb6/0x100 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 ? common_interrupt+0x43/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x1470abe3ec6b Code: Unable to access opcode bytes at RIP 0x1470abe3ec41. RSP: 002b:00007fff13ce9108 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: fffffffffffffffc RBX: 00007fff13ce9218 RCX: 00001470abe3ec6b RDX: 00007fff13ce9200 RSI: 00000000c0181b01 RDI: 0000000000000004 RBP: 00007fff13ce91e0 R08: 0000558d9655da10 R09: 0000558d9655dd00 R10: 00007fff13ce95c0 R11: 0000000000000246 R12: 00007fff13ce9358 R13: 0000000000000013 R14: 0000558d9655db50 R15: 00007fff13ce9470 </TASK> --[ end trace 888a9b92e04c5c97 ]-- |
| CVE-2024-26669 | In the Linux kernel, the following vulnerability has been resolved: net/sched: flower: Fix chain template offload When a qdisc is deleted from a net device the stack instructs the underlying driver to remove its flow offload callback from the associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack then continues to replay the removal of the filters in the block for this driver by iterating over the chains in the block and invoking the 'reoffload' operation of the classifier being used. In turn, the classifier in its 'reoffload' operation prepares and emits a 'FLOW_CLS_DESTROY' command for each filter. However, the stack does not do the same for chain templates and the underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when a qdisc is deleted. This results in a memory leak [1] which can be reproduced using [2]. Fix by introducing a 'tmplt_reoffload' operation and have the stack invoke it with the appropriate arguments as part of the replay. Implement the operation in the sole classifier that supports chain templates (flower) by emitting the 'FLOW_CLS_TMPLT_{CREATE,DESTROY}' command based on whether a flow offload callback is being bound to a filter block or being unbound from one. As far as I can tell, the issue happens since cited commit which reordered tcf_block_offload_unbind() before tcf_block_flush_all_chains() in __tcf_block_put(). The order cannot be reversed as the filter block is expected to be freed after flushing all the chains. [1] unreferenced object 0xffff888107e28800 (size 2048): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): b1 a6 7c 11 81 88 ff ff e0 5b b3 10 81 88 ff ff ..|......[...... 01 00 00 00 00 00 00 00 e0 aa b0 84 ff ff ff ff ................ backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab374e>] __kmalloc+0x4e/0x90 [<ffffffff832aec6d>] mlxsw_sp_acl_ruleset_get+0x34d/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [<ffffffff8379d29a>] ___sys_sendmsg+0x13a/0x1e0 [<ffffffff8379d50c>] __sys_sendmsg+0x11c/0x1f0 [<ffffffff843b9ce0>] do_syscall_64+0x40/0xe0 unreferenced object 0xffff88816d2c0400 (size 1024): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): 40 00 00 00 00 00 00 00 57 f6 38 be 00 00 00 00 @.......W.8..... 10 04 2c 6d 81 88 ff ff 10 04 2c 6d 81 88 ff ff ..,m......,m.... backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab36c1>] __kmalloc_node+0x51/0x90 [<ffffffff81a8ed96>] kvmalloc_node+0xa6/0x1f0 [<ffffffff82827d03>] bucket_table_alloc.isra.0+0x83/0x460 [<ffffffff82828d2b>] rhashtable_init+0x43b/0x7c0 [<ffffffff832aed48>] mlxsw_sp_acl_ruleset_get+0x428/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [2] # tc qdisc add dev swp1 clsact # tc chain add dev swp1 ingress proto ip chain 1 flower dst_ip 0.0.0.0/32 # tc qdisc del dev ---truncated--- |
| CVE-2024-26595 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path When calling mlxsw_sp_acl_tcam_region_destroy() from an error path after failing to attach the region to an ACL group, we hit a NULL pointer dereference upon 'region->group->tcam' [1]. Fix by retrieving the 'tcam' pointer using mlxsw_sp_acl_to_tcam(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:mlxsw_sp_acl_tcam_region_destroy+0xa0/0xd0 [...] Call Trace: mlxsw_sp_acl_tcam_vchunk_get+0x88b/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b |
| CVE-2024-26586 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix stack corruption When tc filters are first added to a net device, the corresponding local port gets bound to an ACL group in the device. The group contains a list of ACLs. In turn, each ACL points to a different TCAM region where the filters are stored. During forwarding, the ACLs are sequentially evaluated until a match is found. One reason to place filters in different regions is when they are added with decreasing priorities and in an alternating order so that two consecutive filters can never fit in the same region because of their key usage. In Spectrum-2 and newer ASICs the firmware started to report that the maximum number of ACLs in a group is more than 16, but the layout of the register that configures ACL groups (PAGT) was not updated to account for that. It is therefore possible to hit stack corruption [1] in the rare case where more than 16 ACLs in a group are required. Fix by limiting the maximum ACL group size to the minimum between what the firmware reports and the maximum ACLs that fit in the PAGT register. Add a test case to make sure the machine does not crash when this condition is hit. [1] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120 [...] dump_stack_lvl+0x36/0x50 panic+0x305/0x330 __stack_chk_fail+0x15/0x20 mlxsw_sp_acl_tcam_group_update+0x116/0x120 mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110 mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b |
| CVE-2024-23944 | Information disclosure in persistent watchers handling in Apache ZooKeeper due to missing ACL check. It allows an attacker to monitor child znodes by attaching a persistent watcher (addWatch command) to a parent which the attacker has already access to. ZooKeeper server doesn't do ACL check when the persistent watcher is triggered and as a consequence, the full path of znodes that a watch event gets triggered upon is exposed to the owner of the watcher. It's important to note that only the path is exposed by this vulnerability, not the data of znode, but since znode path can contain sensitive information like user name or login ID, this issue is potentially critical. Users are recommended to upgrade to version 3.9.2, 3.8.4 which fixes the issue. |
| CVE-2024-20322 | A vulnerability in the access control list (ACL) processing on Pseudowire interfaces in the ingress direction of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to improper assignment of lookup keys to internal interface contexts. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to access resources behind the affected device that were supposed to be protected by a configured ACL. |
| CVE-2024-20316 | A vulnerability in the data model interface (DMI) services of Cisco IOS XE Software could allow an unauthenticated, remote attacker to access resources that should have been protected by a configured IPv4 access control list (ACL). This vulnerability is due to improper handling of error conditions when a successfully authorized device administrator updates an IPv4 ACL using the NETCONF or RESTCONF protocol, and the update would reorder access control entries (ACEs) in the updated ACL. An attacker could exploit this vulnerability by accessing resources that should have been protected across an affected device. |
| CVE-2024-20315 | A vulnerability in the access control list (ACL) processing on MPLS interfaces in the ingress direction of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to improper assignment of lookup keys to internal interface contexts. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to access resources behind the affected device that were supposed to be protected by a configured ACL. |
| CVE-2024-20291 | A vulnerability in the access control list (ACL) programming for port channel subinterfaces of Cisco Nexus 3000 and 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, remote attacker to send traffic that should be blocked through an affected device. This vulnerability is due to incorrect hardware programming that occurs when configuration changes are made to port channel member ports. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to access network resources that should be protected by an ACL that was applied on port channel subinterfaces. |
| CVE-2024-20263 | A vulnerability with the access control list (ACL) management within a stacked switch configuration of Cisco Business 250 Series Smart Switches and Business 350 Series Managed Switches could allow an unauthenticated, remote attacker to bypass protection offered by a configured ACL on an affected device. This vulnerability is due to incorrect processing of ACLs on a stacked configuration when either the primary or backup switches experience a full stack reload or power cycle. An attacker could exploit this vulnerability by sending crafted traffic through an affected device. A successful exploit could allow the attacker to bypass configured ACLs, causing traffic to be dropped or forwarded in an unexpected manner. The attacker does not have control over the conditions that result in the device being in the vulnerable state. Note: In the vulnerable state, the ACL would be correctly applied on the primary devices but could be incorrectly applied to the backup devices. |
| CVE-2023-6068 | On affected 7130 Series FPGA platforms running MOS and recent versions of the MultiAccess FPGA, application of ACL’s may result in incorrect operation of the configured ACL for a port resulting in some packets that should be denied being permitted and some |
| CVE-2023-45129 | Synapse is an open-source Matrix homeserver written and maintained by the Matrix.org Foundation. Prior to version 1.94.0, a malicious server ACL event can impact performance temporarily or permanently leading to a persistent denial of service. Homeservers running on a closed federation (which presumably do not need to use server ACLs) are not affected. Server administrators are advised to upgrade to Synapse 1.94.0 or later. As a workaround, rooms with malicious server ACL events can be purged and blocked using the admin API. |
| CVE-2023-43137 | TPLINK TL-ER5120G 4.0 2.0.0 Build 210817 Rel.80868n has a command injection vulnerability, when an attacker adds ACL rules after authentication, and the rule name parameter has injection points. |
| CVE-2023-41053 | Redis is an in-memory database that persists on disk. Redis does not correctly identify keys accessed by `SORT_RO` and as a result may grant users executing this command access to keys that are not explicitly authorized by the ACL configuration. The problem exists in Redis 7.0 or newer and has been fixed in Redis 7.0.13 and 7.2.1. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-4091 | A vulnerability was discovered in Samba, where the flaw allows SMB clients to truncate files, even with read-only permissions when the Samba VFS module "acl_xattr" is configured with "acl_xattr:ignore system acls = yes". The SMB protocol allows opening files when the client requests read-only access but then implicitly truncates the opened file to 0 bytes if the client specifies a separate OVERWRITE create disposition request. The issue arises in configurations that bypass kernel file system permissions checks, relying solely on Samba's permissions. |
| CVE-2023-37491 | The ACL (Access Control List) of SAP Message Server - versions KERNEL 7.22, KERNEL 7.53, KERNEL 7.54, KERNEL 7.77, RNL64UC 7.22, RNL64UC 7.22EXT, RNL64UC 7.53, KRNL64NUC 7.22, KRNL64NUC 7.22EXT, can be bypassed in certain conditions, which may enable an authenticated malicious user to enter the network of the SAP systems served by the attacked SAP Message server. This may lead to unauthorized read and write of data as well as rendering the system unavailable. |
| CVE-2023-36824 | Redis is an in-memory database that persists on disk. In Redit 7.0 prior to 7.0.12, extracting key names from a command and a list of arguments may, in some cases, trigger a heap overflow and result in reading random heap memory, heap corruption and potentially remote code execution. Several scenarios that may lead to authenticated users executing a specially crafted `COMMAND GETKEYS` or `COMMAND GETKEYSANDFLAGS`and authenticated users who were set with ACL rules that match key names, executing a specially crafted command that refers to a variadic list of key names. The vulnerability is patched in Redis 7.0.12. |
| CVE-2023-35800 | Stormshield Endpoint Security Evolution 2.0.0 through 2.4.2 has Insecure Permissions. An ACL entry on the SES Evolution agent directory that contains the agent logs displayed in the GUI allows interactive users to read data, which could allow access to information reserved to administrators. |
| CVE-2023-3299 | HashiCorp Nomad Enterprise 1.2.11 up to 1.5.6, and 1.4.10 ACL policies using a block without a label generates unexpected results. Fixed in 1.6.0, 1.5.7, and 1.4.11. |
| CVE-2023-32479 | Dell Encryption, Dell Endpoint Security Suite Enterprise, and Dell Security Management Server versions prior to 11.9.0 contain privilege escalation vulnerability due to improper ACL of the non-default installation directory. A local malicious user could potentially exploit this vulnerability by replacing binaries in installed directory and taking reverse shell of the system leading to Privilege Escalation. |
| CVE-2023-32064 | OroCommerce package with customer portal and non authenticated visitor website base features. Back-office users can access information about Customer and Customer User menus, bypassing ACL security restrictions due to insufficient security checks. This issue has been patched in version 5.0.11 and 5.1.1. |
| CVE-2023-32063 | OroCalendarBundle enables a Calendar feature and related functionality in Oro applications. Back-office users can access information from any call event, bypassing ACL security restrictions due to insufficient security checks. This issue has been patched in version 5.0.4 and 5.1.1. |
| CVE-2023-32062 | OroPlatform is a package that assists system and user calendar management. Back-office users can access information from any system calendar event, bypassing ACL security restrictions due to insufficient security checks. This vulnerability has been patched in version 5.1.1. |
| CVE-2023-3072 | HashiCorp Nomad and Nomad Enterprise 0.7.0 up to 1.5.6 and 1.4.10 ACL policies using a block without a label generates unexpected results. Fixed in 1.6.0, 1.5.7, and 1.4.11. |
| CVE-2023-30531 | Jenkins Consul KV Builder Plugin 2.0.13 and earlier does not mask the HashiCorp Consul ACL Token on the global configuration form, increasing the potential for attackers to observe and capture it. |
| CVE-2023-30530 | Jenkins Consul KV Builder Plugin 2.0.13 and earlier stores the HashiCorp Consul ACL Token unencrypted in its global configuration file on the Jenkins controller where it can be viewed by users with access to the Jenkins controller file system. |
| CVE-2023-28399 | Incorrect permission assignment for critical resource exists in CONPROSYS HMI System (CHS) versions prior to 3.5.3. ACL (Access Control List) is not appropriately set to the local folder where the affected product is installed, therefore a wide range of privileges is permitted to a user of the PC where the affected product is installed. As a result, the user may be able to destroy the system and/or execute a malicious program. |
| CVE-2023-28357 | A vulnerability has been identified in Rocket.Chat, where the ACL checks in the Slash Command /mute occur after checking whether a user is a member of a given channel, leaking private channel members to unauthorized users. This allows authenticated users to enumerate whether a username is a member of a channel that they do not have access to. |
| CVE-2023-26490 | mailcow is a dockerized email package, with multiple containers linked in one bridged network. The Sync Job feature - which can be made available to standard users by assigning them the necessary permission - suffers from a shell command injection. A malicious user can abuse this vulnerability to obtain shell access to the Docker container running dovecot. The imapsync Perl script implements all the necessary functionality for this feature, including the XOAUTH2 authentication mechanism. This code path creates a shell command to call openssl. However, since different parts of the specified user password are included without any validation, one can simply execute additional shell commands. Notably, the default ACL for a newly-created mailcow account does not include the necessary permission. The Issue has been fixed within the 2023-03 Update (March 3rd 2023). As a temporary workaround the Syncjob ACL can be removed from all mailbox users, preventing from creating or changing existing Syncjobs. |
| CVE-2023-25092 | Multiple buffer overflow vulnerabilities exist in the vtysh_ubus binary of Milesight UR32L v32.3.0.5 due to the use of an unsafe sprintf pattern. A specially crafted HTTP request can lead to arbitrary code execution. An attacker with high privileges can send HTTP requests to trigger these vulnerabilities.This buffer overflow occurs in the handle_interface_acl function with the interface and out_acl variables. |
| CVE-2023-25091 | Multiple buffer overflow vulnerabilities exist in the vtysh_ubus binary of Milesight UR32L v32.3.0.5 due to the use of an unsafe sprintf pattern. A specially crafted HTTP request can lead to arbitrary code execution. An attacker with high privileges can send HTTP requests to trigger these vulnerabilities.This buffer overflow occurs in the handle_interface_acl function with the interface variable when out_acl is -1. |
| CVE-2023-25090 | Multiple buffer overflow vulnerabilities exist in the vtysh_ubus binary of Milesight UR32L v32.3.0.5 due to the use of an unsafe sprintf pattern. A specially crafted HTTP request can lead to arbitrary code execution. An attacker with high privileges can send HTTP requests to trigger these vulnerabilities.This buffer overflow occurs in the handle_interface_acl function with the interface and in_acl variables. |
| CVE-2023-25089 | Multiple buffer overflow vulnerabilities exist in the vtysh_ubus binary of Milesight UR32L v32.3.0.5 due to the use of an unsafe sprintf pattern. A specially crafted HTTP request can lead to arbitrary code execution. An attacker with high privileges can send HTTP requests to trigger these vulnerabilities.This buffer overflow occurs in the handle_interface_acl function with the interface variable when in_acl is -1. |
| CVE-2023-23751 | An issue was discovered in Joomla! 4.0.0 through 4.2.4. A missing ACL check allows non super-admin users to access com_actionlogs. |
| CVE-2023-22733 | Shopware is an open source commerce platform based on Symfony Framework and Vue js. In affected versions the log module would write out all kind of sent mails. An attacker with access to either the local system logs or a centralized logging store may have access to other users accounts. This issue has been addressed in version 6.4.18.1. For older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin. For the full range of functions, we recommend updating to the latest Shopware version. Users unable to upgrade may remove from all users the log module ACL rights or disable logging. |
| CVE-2023-21197 | In btm_acl_process_sca_cmpl_pkt of btm_acl.cc, there is a possible out of bounds read due to an incorrect bounds check. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-251427561 |
| CVE-2023-21190 | In btm_acl_encrypt_change of btm_acl.cc, there is a possible way for a remote device to turn off encryption without resulting in a terminated connection due to an unusual root cause. This could lead to local information disclosure with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-251436534 |
| CVE-2023-20256 | Multiple vulnerabilities in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should be denied to flow through an affected device. These vulnerabilities are due to a logic error that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit these vulnerabilities by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to bypass the interface ACL and access resources that would should be protected. |
| CVE-2023-20245 | Multiple vulnerabilities in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should be denied to flow through an affected device. These vulnerabilities are due to a logic error that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit these vulnerabilities by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to bypass the interface ACL and access resources that would should be protected. |
| CVE-2023-20191 | A vulnerability in the access control list (ACL) processing on MPLS interfaces in the ingress direction of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incomplete support for this feature. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. There are workarounds that address this vulnerability. This advisory is part of the September 2023 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: September 2023 Semiannual Cisco IOS XR Software Security Advisory Bundled Publication . |
| CVE-2023-20190 | A vulnerability in the classic access control list (ACL) compression feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass the protection that is offered by a configured ACL on an affected device. This vulnerability is due to incorrect destination address range encoding in the compression module of an ACL that is applied to an interface of an affected device. An attacker could exploit this vulnerability by sending traffic through the affected device that should be denied by the configured ACL. A successful exploit could allow the attacker to bypass configured ACL protections on the affected device, allowing the attacker to access trusted networks that the device might be protecting. There are workarounds that address this vulnerability. This advisory is part of the September 2023 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: September 2023 Semiannual Cisco IOS XR Software Security Advisory Bundled Publication . |
| CVE-2023-1782 | HashiCorp Nomad and Nomad Enterprise versions 1.5.0 up to 1.5.2 allow unauthenticated users to bypass intended ACL authorizations for clusters where mTLS is not enabled. This issue is fixed in version 1.5.3. |
| CVE-2023-1250 | Improper Input Validation vulnerability in OTRS AG OTRS (ACL modules), OTRS AG ((OTRS)) Community Edition (ACL modules) allows Local Execution of Code. When creating/importing an ACL it was possible to inject code that gets executed via manipulated comments and ACL-names This issue affects OTRS: from 7.0.X before 7.0.42, from 8.0.X before 8.0.31; ((OTRS)) Community Edition: from 6.0.1 through 6.0.34. |
| CVE-2022-47543 | An issue was discovered in Siren Investigate before 12.1.7. There is an ACL bypass on global objects. |
| CVE-2022-47529 | Insecure Win32 memory objects in Endpoint Windows Agents in RSA NetWitness Platform before 12.2 allow local and admin Windows user accounts to modify the endpoint agent service configuration: to either disable it completely or run user-supplied code or commands, thereby bypassing tamper-protection features via ACL modification. |
| CVE-2022-43684 | ServiceNow has released patches and an upgrade that address an Access Control List (ACL) bypass issue in ServiceNow Core functionality. Additional Details This issue is present in the following supported ServiceNow releases: * Quebec prior to Patch 10 Hot Fix 8b * Rome prior to Patch 10 Hot Fix 1 * San Diego prior to Patch 7 * Tokyo prior to Tokyo Patch 1; and * Utah prior to Utah General Availability If this ACL bypass issue were to be successfully exploited, it potentially could allow an authenticated user to obtain sensitive information from tables missing authorization controls. |
| CVE-2022-4149 | The Netskope client service (prior to R96) on Windows runs as NT AUTHORITY\SYSTEM which writes log files to a writable directory (C:\Users\Public\netSkope) for a standard user. The files are created and written with a SYSTEM account except one file (logplaceholder) which inherits permission giving all users full access control list. Netskope client restricts access to this file by allowing only read permissions as a standard user. Whenever the Netskope client service restarts, it deletes the logplaceholder and recreates, creating a race condition, which can be exploited by a malicious local user to create the file and set ACL permissions on the file. Once the file is created by a malicious user with proper ACL permissions, all files within C:\Users\Public\netSkope\ becomes modifiable by the unprivileged user. By using Windows pseudo-symlink, these files can be pointed to other places in the system and thus malicious users will be able to elevate privileges. |
| CVE-2022-36102 | Shopware is an open source e-commerce software. In affected versions if backend admin controllers are called with a certain notation, the ACL could be bypassed. Users could execute actions, which they are normally not able to do. Users are advised to update to the current version (5.7.15). Users can get the update via the Auto-Updater or directly via the download overview. There are no known workarounds for this issue. |
| CVE-2022-35247 | A information disclosure vulnerability exists in Rocket.chat <v5, <v4.8.2 and <v4.7.5 where the lack of ACL checks in the getRoomRoles Meteor method leak channel members with special roles to unauthorized clients. |
| CVE-2022-32988 | Cross Site Scripting (XSS) vulnerability in router Asus DSL-N14U-B1 1.1.2.3_805 via the "*list" parameters (e.g. filter_lwlist, keyword_rulelist, etc) in every ".asp" page containing a list of stored strings. The following asp files are affected: (1) cgi-bin/APP_Installation.asp, (2) cgi-bin/Advanced_ACL_Content.asp, (3) cgi-bin/Advanced_ADSL_Content.asp, (4) cgi-bin/Advanced_ASUSDDNS_Content.asp, (5) cgi-bin/Advanced_AiDisk_ftp.asp, (6) cgi-bin/Advanced_AiDisk_samba.asp, (7) cgi-bin/Advanced_DSL_Content.asp, (8) cgi-bin/Advanced_Firewall_Content.asp, (9) cgi-bin/Advanced_FirmwareUpgrade_Content.asp, (10) cgi-bin/Advanced_GWStaticRoute_Content.asp, (11) cgi-bin/Advanced_IPTV_Content.asp, (12) cgi-bin/Advanced_IPv6_Content.asp, (13) cgi-bin/Advanced_KeywordFilter_Content.asp, (14) cgi-bin/Advanced_LAN_Content.asp, (15) cgi-bin/Advanced_Modem_Content.asp, (16) cgi-bin/Advanced_PortTrigger_Content.asp, (17) cgi-bin/Advanced_QOSUserPrio_Content.asp, (18) cgi-bin/Advanced_QOSUserRules_Content.asp, (19) cgi-bin/Advanced_SettingBackup_Content.asp, (20) cgi-bin/Advanced_System_Content.asp, (21) cgi-bin/Advanced_URLFilter_Content.asp, (22) cgi-bin/Advanced_VPN_PPTP.asp, (23) cgi-bin/Advanced_VirtualServer_Content.asp, (24) cgi-bin/Advanced_WANPort_Content.asp, (25) cgi-bin/Advanced_WAdvanced_Content.asp, (26) cgi-bin/Advanced_WMode_Content.asp, (27) cgi-bin/Advanced_WWPS_Content.asp, (28) cgi-bin/Advanced_Wireless_Content.asp, (29) cgi-bin/Bandwidth_Limiter.asp, (30) cgi-bin/Guest_network.asp, (31) cgi-bin/Main_AccessLog_Content.asp, (32) cgi-bin/Main_AdslStatus_Content.asp, (33) cgi-bin/Main_Spectrum_Content.asp, (34) cgi-bin/Main_WebHistory_Content.asp, (35) cgi-bin/ParentalControl.asp, (36) cgi-bin/QIS_wizard.asp, (37) cgi-bin/QoS_EZQoS.asp, (38) cgi-bin/aidisk.asp, (39) cgi-bin/aidisk/Aidisk-1.asp, (40) cgi-bin/aidisk/Aidisk-2.asp, (41) cgi-bin/aidisk/Aidisk-3.asp, (42) cgi-bin/aidisk/Aidisk-4.asp, (43) cgi-bin/blocking.asp, (44) cgi-bin/cloud_main.asp, (45) cgi-bin/cloud_router_sync.asp, (46) cgi-bin/cloud_settings.asp, (47) cgi-bin/cloud_sync.asp, (48) cgi-bin/device-map/DSL_dashboard.asp, (49) cgi-bin/device-map/clients.asp, (50) cgi-bin/device-map/disk.asp, (51) cgi-bin/device-map/internet.asp, (52) cgi-bin/error_page.asp, (53) cgi-bin/index.asp, (54) cgi-bin/index2.asp, (55) cgi-bin/qis/QIS_PTM_manual_setting.asp, (56) cgi-bin/qis/QIS_admin_pass.asp, (57) cgi-bin/qis/QIS_annex_setting.asp, (58) cgi-bin/qis/QIS_bridge_cfg_tmp.asp, (59) cgi-bin/qis/QIS_detect.asp, (60) cgi-bin/qis/QIS_finish.asp, (61) cgi-bin/qis/QIS_ipoa_cfg_tmp.asp, (62) cgi-bin/qis/QIS_manual_setting.asp, (63) cgi-bin/qis/QIS_mer_cfg.asp, (64) cgi-bin/qis/QIS_mer_cfg_tmp.asp, (65) cgi-bin/qis/QIS_ppp_cfg.asp, (66) cgi-bin/qis/QIS_ppp_cfg_tmp.asp, (67) cgi-bin/qis/QIS_wireless.asp, (68) cgi-bin/query_wan_status.asp, (69) cgi-bin/query_wan_status2.asp, and (70) cgi-bin/start_apply.asp. |
| CVE-2022-31495 | LibreHealth EHR Base 2.0.0 allows gacl/admin/acl_admin.php return_page XSS. |
| CVE-2022-31494 | LibreHealth EHR Base 2.0.0 allows gacl/admin/acl_admin.php action XSS. |
| CVE-2022-31493 | LibreHealth EHR Base 2.0.0 allows gacl/admin/acl_admin.php acl_id XSS. |
| CVE-2022-31138 | mailcow is a mailserver suite. Prior to mailcow-dockerized version 2022-06a, an extended privilege vulnerability can be exploited by manipulating the custom parameters regexmess, skipmess, regexflag, delete2foldersonly, delete2foldersbutnot, regextrans2, pipemess, or maxlinelengthcmd to execute arbitrary code. Users should update their mailcow instances with the `update.sh` script in the mailcow root directory to 2022-06a or newer to receive a patch for this issue. As a temporary workaround, the Syncjob ACL can be removed from all mailbox users, preventing changes to those settings. |
| CVE-2022-25943 | The installer of WPS Office for Windows versions prior to v11.2.0.10258 fails to configure properly the ACL for the directory where the service program is installed. |
| CVE-2022-25372 | Pritunl Client through 1.2.3019.52 on Windows allows local privilege escalation, related to an ACL entry for CREATOR OWNER in platform_windows.go. |
| CVE-2022-25318 | An issue was discovered in Cerebrate through 1.4. An incorrect sharing group ACL allowed an unprivileged user to edit and modify sharing groups. |
| CVE-2022-24736 | Redis is an in-memory database that persists on disk. Prior to versions 6.2.7 and 7.0.0, an attacker attempting to load a specially crafted Lua script can cause NULL pointer dereference which will result with a crash of the redis-server process. The problem is fixed in Redis versions 7.0.0 and 6.2.7. An additional workaround to mitigate this problem without patching the redis-server executable, if Lua scripting is not being used, is to block access to `SCRIPT LOAD` and `EVAL` commands using ACL rules. |
| CVE-2022-24735 | Redis is an in-memory database that persists on disk. By exploiting weaknesses in the Lua script execution environment, an attacker with access to Redis prior to version 7.0.0 or 6.2.7 can inject Lua code that will execute with the (potentially higher) privileges of another Redis user. The Lua script execution environment in Redis provides some measures that prevent a script from creating side effects that persist and can affect the execution of the same, or different script, at a later time. Several weaknesses of these measures have been publicly known for a long time, but they had no security impact as the Redis security model did not endorse the concept of users or privileges. With the introduction of ACLs in Redis 6.0, these weaknesses can be exploited by a less privileged users to inject Lua code that will execute at a later time, when a privileged user executes a Lua script. The problem is fixed in Redis versions 7.0.0 and 6.2.7. An additional workaround to mitigate this problem without patching the redis-server executable, if Lua scripting is not being used, is to block access to `SCRIPT LOAD` and `EVAL` commands using ACL rules. |
| CVE-2022-22941 | An issue was discovered in SaltStack Salt in versions before 3002.8, 3003.4, 3004.1. When configured as a Master-of-Masters, with a publisher_acl, if a user configured in the publisher_acl targets any minion connected to the Syndic, the Salt Master incorrectly interpreted no valid targets as valid, allowing configured users to target any of the minions connected to the syndic with their configured commands. This requires a syndic master combined with publisher_acl configured on the Master-of-Masters, allowing users specified in the publisher_acl to bypass permissions, publishing authorized commands to any configured minion. |
| CVE-2022-22148 | 'Root Service' service implemented in the following Yokogawa Electric products creates some named pipe with improper ACL configuration. CENTUM CS 3000 versions from R3.08.10 to R3.09.00, CENTUM VP versions from R4.01.00 to R4.03.00, from R5.01.00 to R5.04.20, and from R6.01.00 to R6.08.00, Exaopc versions from R3.72.00 to R3.79.00. |
| CVE-2022-22141 | 'Long-term Data Archive Package' service implemented in the following Yokogawa Electric products creates some named pipe with imporper ACL configuration. CENTUM CS 3000 versions from R3.08.10 to R3.09.00, CENTUM VP versions from R4.01.00 to R4.03.00, from R5.01.00 to R5.04.20, and from R6.01.00 to R6.08.00, Exaopc versions from R3.72.00 to R3.79.00. |
| CVE-2021-43998 | HashiCorp Vault and Vault Enterprise 0.11.0 up to 1.7.5 and 1.8.4 templated ACL policies would always match the first-created entity alias if multiple entity aliases exist for a specified entity and mount combination, potentially resulting in incorrect policy enforcement. Fixed in Vault and Vault Enterprise 1.7.6, 1.8.5, and 1.9.0. |
| CVE-2021-41805 | HashiCorp Consul Enterprise before 1.8.17, 1.9.x before 1.9.11, and 1.10.x before 1.10.4 has Incorrect Access Control. An ACL token (with the default operator:write permissions) in one namespace can be used for unintended privilege escalation in a different namespace. |
| CVE-2021-41099 | Redis is an open source, in-memory database that persists on disk. An integer overflow bug in the underlying string library can be used to corrupt the heap and potentially result with denial of service or remote code execution. The vulnerability involves changing the default proto-max-bulk-len configuration parameter to a very large value and constructing specially crafted network payloads or commands. The problem is fixed in Redis versions 6.2.6, 6.0.16 and 5.0.14. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from modifying the proto-max-bulk-len configuration parameter. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command. |
| CVE-2021-39234 | In Apache Ozone versions prior to 1.2.0, Authenticated users knowing the ID of an existing block can craft specific request allowing access those blocks, bypassing other security checks like ACL. |
| CVE-2021-39132 | Rundeck is an open source automation service with a web console, command line tools and a WebAPI. Prior to version 3.3.14 and version 3.4.3, an authorized user can upload a zip-format plugin with a crafted plugin.yaml, or a crafted aclpolicy yaml file, or upload an untrusted project archive with a crafted aclpolicy yaml file, that can cause the server to run untrusted code on Rundeck Community or Enterprise Edition. An authenticated user can make a POST request, that can cause the server to run untrusted code on Rundeck Enterprise Edition. The zip-format plugin issues requires authentication and authorization to these access levels, and affects all Rundeck editions:`admin` level access to the `system` resource type. The ACL Policy yaml file upload issues requires authentication and authorization to these access levels, and affects all Rundeck editions: `create` `update` or `admin` level access to a `project_acl` resource, and/or`create` `update` or `admin` level access to the `system_acl` resource. The unauthorized POST request requires authentication, but no specific authorization, and affects Rundeck Enterprise only. Patches are available in versions 3.4.3, 3.3.14 |
| CVE-2021-3667 | An improper locking issue was found in the virStoragePoolLookupByTargetPath API of libvirt. It occurs in the storagePoolLookupByTargetPath function where a locked virStoragePoolObj object is not properly released on ACL permission failure. Clients connecting to the read-write socket with limited ACL permissions could use this flaw to acquire the lock and prevent other users from accessing storage pool/volume APIs, resulting in a denial of service condition. The highest threat from this vulnerability is to system availability. |
| CVE-2021-34787 | A vulnerability in the identity-based firewall (IDFW) rule processing feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass security protections. This vulnerability is due to improper handling of network requests by affected devices configured to use object group search. An attacker could exploit this vulnerability by sending a specially crafted network request to an affected device. A successful exploit could allow the attacker to bypass access control list (ACL) rules on the device, bypass security protections, and send network traffic to unauthorized hosts. |
| CVE-2021-34696 | A vulnerability in the access control list (ACL) programming of Cisco ASR 900 and ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incorrect programming of hardware when an ACL is configured using a method other than the configuration CLI. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. |
| CVE-2021-34620 | The WP Fluent Forms plugin < 3.6.67 for WordPress is vulnerable to Cross-Site Request Forgery leading to stored Cross-Site Scripting and limited Privilege Escalation due to a missing nonce check in the access control function for administrative AJAX actions |
| CVE-2021-34148 | The Bluetooth Classic implementation in the Cypress WICED BT stack through 2.9.0 for CYW20735B1 devices does not properly handle the reception of LMP_max_slot with a greater ACL Length after completion of the LMP setup procedure, allowing attackers in radio range to trigger a denial of service (firmware crash) via a crafted LMP packet. |
| CVE-2021-32761 | Redis is an in-memory database that persists on disk. A vulnerability involving out-of-bounds read and integer overflow to buffer overflow exists starting with version 2.2 and prior to versions 5.0.13, 6.0.15, and 6.2.5. On 32-bit systems, Redis `*BIT*` command are vulnerable to integer overflow that can potentially be exploited to corrupt the heap, leak arbitrary heap contents or trigger remote code execution. The vulnerability involves changing the default `proto-max-bulk-len` configuration parameter to a very large value and constructing specially crafted commands bit commands. This problem only affects Redis on 32-bit platforms, or compiled as a 32-bit binary. Redis versions 5.0.`3m 6.0.15, and 6.2.5 contain patches for this issue. An additional workaround to mitigate the problem without patching the `redis-server` executable is to prevent users from modifying the `proto-max-bulk-len` configuration parameter. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command. |
| CVE-2021-32709 | Shopware is an open source eCommerce platform. Creation of order credits was not validated by ACL in admin orders. Users are recommend to update to the current version 6.4.1.1. You can get the update to 6.4.1.1 regularly via the Auto-Updater or directly via the download overview. For older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin. For the full range of functions, we recommend updating to the latest Shopware version. |
| CVE-2021-32687 | Redis is an open source, in-memory database that persists on disk. An integer overflow bug affecting all versions of Redis can be exploited to corrupt the heap and potentially be used to leak arbitrary contents of the heap or trigger remote code execution. The vulnerability involves changing the default set-max-intset-entries configuration parameter to a very large value and constructing specially crafted commands to manipulate sets. The problem is fixed in Redis versions 6.2.6, 6.0.16 and 5.0.14. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from modifying the set-max-intset-entries configuration parameter. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command. |
| CVE-2021-32628 | Redis is an open source, in-memory database that persists on disk. An integer overflow bug in the ziplist data structure used by all versions of Redis can be exploited to corrupt the heap and potentially result with remote code execution. The vulnerability involves modifying the default ziplist configuration parameters (hash-max-ziplist-entries, hash-max-ziplist-value, zset-max-ziplist-entries or zset-max-ziplist-value) to a very large value, and then constructing specially crafted commands to create very large ziplists. The problem is fixed in Redis versions 6.2.6, 6.0.16, 5.0.14. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from modifying the above configuration parameters. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command. |
| CVE-2021-32627 | Redis is an open source, in-memory database that persists on disk. In affected versions an integer overflow bug in Redis can be exploited to corrupt the heap and potentially result with remote code execution. The vulnerability involves changing the default proto-max-bulk-len and client-query-buffer-limit configuration parameters to very large values and constructing specially crafted very large stream elements. The problem is fixed in Redis 6.2.6, 6.0.16 and 5.0.14. For users unable to upgrade an additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from modifying the proto-max-bulk-len configuration parameter. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command. |
| CVE-2021-32626 | Redis is an open source, in-memory database that persists on disk. In affected versions specially crafted Lua scripts executing in Redis can cause the heap-based Lua stack to be overflowed, due to incomplete checks for this condition. This can result with heap corruption and potentially remote code execution. This problem exists in all versions of Redis with Lua scripting support, starting from 2.6. The problem is fixed in versions 6.2.6, 6.0.16 and 5.0.14. For users unable to update an additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from executing Lua scripts. This can be done using ACL to restrict EVAL and EVALSHA commands. |
| CVE-2021-32625 | Redis is an open source (BSD licensed), in-memory data structure store, used as a database, cache, and message broker. An integer overflow bug in Redis version 6.0 or newer, could be exploited using the STRALGO LCS command to corrupt the heap and potentially result with remote code execution. This is a result of an incomplete fix by CVE-2021-29477. The problem is fixed in version 6.2.4 and 6.0.14. An additional workaround to mitigate the problem without patching the redis-server executable is to use ACL configuration to prevent clients from using the STRALGO LCS command. On 64 bit systems which have the fixes of CVE-2021-29477 (6.2.3 or 6.0.13), it is sufficient to make sure that the proto-max-bulk-len config parameter is smaller than 2GB (default is 512MB). |
| CVE-2021-32559 | An integer overflow exists in pywin32 prior to version b301 when adding an access control entry (ACE) to an access control list (ACL) that would cause the size to be greater than 65535 bytes. An attacker who successfully exploited this vulnerability could crash the vulnerable process. |
| CVE-2021-29478 | Redis is an open source (BSD licensed), in-memory data structure store, used as a database, cache, and message broker. An integer overflow bug in Redis 6.2 before 6.2.3 could be exploited to corrupt the heap and potentially result with remote code execution. Redis 6.0 and earlier are not directly affected by this issue. The problem is fixed in version 6.2.3. An additional workaround to mitigate the problem without patching the `redis-server` executable is to prevent users from modifying the `set-max-intset-entries` configuration parameter. This can be done using ACL to restrict unprivileged users from using the `CONFIG SET` command. |
| CVE-2021-29477 | Redis is an open source (BSD licensed), in-memory data structure store, used as a database, cache, and message broker. An integer overflow bug in Redis version 6.0 or newer could be exploited using the `STRALGO LCS` command to corrupt the heap and potentially result with remote code execution. The problem is fixed in version 6.2.3 and 6.0.13. An additional workaround to mitigate the problem without patching the redis-server executable is to use ACL configuration to prevent clients from using the `STRALGO LCS` command. |
| CVE-2021-28511 | This advisory documents the impact of an internally found vulnerability in Arista EOS for security ACL bypass. The impact of this vulnerability is that the security ACL drop rule might be bypassed if a NAT ACL rule filter with permit action matches the packet flow. This could allow a host with an IP address in a range that matches the range allowed by a NAT ACL and a range denied by a Security ACL to be forwarded incorrectly as it should have been denied by the Security ACL. This can enable an ACL bypass. |
| CVE-2021-28507 | An issue has recently been discovered in Arista EOS where, under certain conditions, the service ACL configured for OpenConfig gNOI and OpenConfig RESTCONF might be bypassed, which results in the denied requests being forwarded to the agent. |
| CVE-2021-28505 | On affected Arista EOS platforms, if a VXLAN match rule exists in an IPv4 access-list that is applied to the ingress of an L2 or an L3 port/SVI, the VXLAN rule and subsequent ACL rules in that access list will ignore the specified IP protocol. |
| CVE-2021-28504 | On Arista Strata family products which have “TCAM profile” feature enabled when Port IPv4 access-list has a rule which matches on “vxlan” as protocol then that rule and subsequent rules ( rules declared after it in ACL ) do not match on IP protocol field as expected. |
| CVE-2021-26038 | An issue was discovered in Joomla! 2.5.0 through 3.9.27. Install action in com_installer lack the required hardcoded ACL checks for superusers. A default system is not affected cause the default ACL for com_installer is limited to super users already. |
| CVE-2021-26027 | An issue was discovered in Joomla! 3.0.0 through 3.9.24. Incorrect ACL checks could allow unauthorized change of the category for an article. |
| CVE-2021-23177 | An improper link resolution flaw while extracting an archive can lead to changing the access control list (ACL) of the target of the link. An attacker may provide a malicious archive to a victim user, who would trigger this flaw when trying to extract the archive. A local attacker may use this flaw to change the ACL of a file on the system and gain more privileges. |
| CVE-2021-23123 | An issue was discovered in Joomla! 3.0.0 through 3.9.23. The lack of ACL checks in the orderPosition endpoint of com_modules leak names of unpublished and/or inaccessible modules. |
| CVE-2021-21309 | Redis is an open-source, in-memory database that persists on disk. In affected versions of Redis an integer overflow bug in 32-bit Redis version 4.0 or newer could be exploited to corrupt the heap and potentially result with remote code execution. Redis 4.0 or newer uses a configurable limit for the maximum supported bulk input size. By default, it is 512MB which is a safe value for all platforms. If the limit is significantly increased, receiving a large request from a client may trigger several integer overflow scenarios, which would result with buffer overflow and heap corruption. We believe this could in certain conditions be exploited for remote code execution. By default, authenticated Redis users have access to all configuration parameters and can therefore use the “CONFIG SET proto-max-bulk-len” to change the safe default, making the system vulnerable. **This problem only affects 32-bit Redis (on a 32-bit system, or as a 32-bit executable running on a 64-bit system).** The problem is fixed in version 6.2, and the fix is back ported to 6.0.11 and 5.0.11. Make sure you use one of these versions if you are running 32-bit Redis. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent clients from directly executing `CONFIG SET`: Using Redis 6.0 or newer, ACL configuration can be used to block the command. Using older versions, the `rename-command` configuration directive can be used to rename the command to a random string unknown to users, rendering it inaccessible. Please note that this workaround may have an additional impact on users or operational systems that expect `CONFIG SET` to behave in certain ways. |
| CVE-2021-1957 | Improper Access Control when ACL link encryption is failed and ACL link is not disconnected during reconnection with paired device in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music |
| CVE-2021-1591 | A vulnerability in the EtherChannel port subscription logic of Cisco Nexus 9500 Series Switches could allow an unauthenticated, remote attacker to bypass access control list (ACL) rules that are configured on an affected device. This vulnerability is due to oversubscription of resources that occurs when applying ACLs to port channel interfaces. An attacker could exploit this vulnerability by attempting to access network resources that are protected by the ACL. A successful exploit could allow the attacker to access network resources that would be protected by the ACL that was applied on the port channel interface. |
| CVE-2021-1389 | A vulnerability in the IPv6 traffic processing of Cisco IOS XR Software and Cisco NX-OS Software for certain Cisco devices could allow an unauthenticated, remote attacker to bypass an IPv6 access control list (ACL) that is configured for an interface of an affected device. The vulnerability is due to improper processing of IPv6 traffic that is sent through an affected device. An attacker could exploit this vulnerability by sending crafted IPv6 packets that traverse the affected device. A successful exploit could allow the attacker to access resources that would typically be protected by the interface ACL. |
| CVE-2021-1243 | A vulnerability in the Local Packet Transport Services (LPTS) programming of the SNMP with the management plane protection feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to allow connections despite the management plane protection that is configured to deny access to the SNMP server of an affected device. This vulnerability is due to incorrect LPTS programming when using SNMP with management plane protection. An attacker could exploit this vulnerability by connecting to an affected device using SNMP. A successful exploit could allow the attacker to connect to the device on the configured SNMP ports. Valid credentials are required to execute any of the SNMP requests. |
| CVE-2020-8517 | An issue was discovered in Squid before 4.10. Due to incorrect input validation, the NTLM authentication credentials parser in ext_lm_group_acl may write to memory outside the credentials buffer. On systems with memory access protections, this can result in the helper process being terminated unexpectedly. This leads to the Squid process also terminating and a denial of service for all clients using the proxy. |
| CVE-2020-8349 | An internal security review has identified an unauthenticated remote code execution vulnerability in Cloud Networking Operating System (CNOS)’ optional REST API management interface. This interface is disabled by default and not vulnerable unless enabled. When enabled, it is only vulnerable where attached to a VRF and as allowed by defined ACLs. Lenovo strongly recommends upgrading to a non-vulnerable CNOS release. Where not possible, Lenovo recommends disabling the REST API management interface or restricting access to the management VRF and further limiting access to authorized management stations via ACL. |
| CVE-2020-8010 | CA Unified Infrastructure Management (Nimsoft/UIM) 20.1, 20.3.x, and 9.20 and below contains an improper ACL handling vulnerability in the robot (controller) component. A remote attacker can execute commands, read from, or write to the target system. |
| CVE-2020-35616 | An issue was discovered in Joomla! 1.7.0 through 3.9.22. Lack of input validation while handling ACL rulesets can cause write ACL violations. |
| CVE-2020-3418 | A vulnerability in Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9800 Series Routers could allow an unauthenticated, adjacent attacker to send ICMPv6 traffic prior to the client being placed into RUN state. The vulnerability is due to an incomplete access control list (ACL) being applied prior to RUN state. An attacker could exploit this vulnerability by connecting to the associated service set identifier (SSID) and sending ICMPv6 traffic. A successful exploit could allow the attacker to send ICMPv6 traffic prior to RUN state. |
| CVE-2020-3407 | A vulnerability in the RESTCONF and NETCONF-YANG access control list (ACL) function of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect processing of the ACL that is tied to the RESTCONF or NETCONF-YANG feature. An attacker could exploit this vulnerability by accessing the device using RESTCONF or NETCONF-YANG. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition. |
| CVE-2020-3364 | A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface. |
| CVE-2020-29006 | MISP before 2.4.135 lacks an ACL check, related to app/Controller/GalaxyElementsController.php and app/Model/GalaxyElement.php. |
| CVE-2020-28053 | HashiCorp Consul and Consul Enterprise 1.2.0 up to 1.8.5 allowed operators with operator:read ACL permissions to read the Connect CA private key configuration. Fixed in 1.6.10, 1.7.10, and 1.8.6. |
| CVE-2020-25654 | An ACL bypass flaw was found in pacemaker. An attacker having a local account on the cluster and in the haclient group could use IPC communication with various daemons directly to perform certain tasks that they would be prevented by ACLs from doing if they went through the configuration. |
| CVE-2020-25637 | A double free memory issue was found to occur in the libvirt API, in versions before 6.8.0, responsible for requesting information about network interfaces of a running QEMU domain. This flaw affects the polkit access control driver. Specifically, clients connecting to the read-write socket with limited ACL permissions could use this flaw to crash the libvirt daemon, resulting in a denial of service, or potentially escalate their privileges on the system. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability. |
| CVE-2020-24394 | In the Linux kernel before 5.7.8, fs/nfsd/vfs.c (in the NFS server) can set incorrect permissions on new filesystem objects when the filesystem lacks ACL support, aka CID-22cf8419f131. This occurs because the current umask is not considered. |
| CVE-2020-15412 | An issue was discovered in MISP 2.4.128. app/Controller/EventsController.php lacks an event ACL check before proceeding to allow a user to send an event contact form. |
| CVE-2020-15411 | An issue was discovered in MISP 2.4.128. app/Controller/AttributesController.php has insufficient ACL checks in the attachment downloader. |
| CVE-2020-15251 | In the Channelmgnt plug-in for Sopel (a Python IRC bot) before version 1.0.3, malicious users are able to op/voice and take over a channel. This is an ACL bypass vulnerability. This plugin is bundled with MirahezeBot-Plugins with versions from 9.0.0 and less than 9.0.2 affected. Version 9.0.2 includes 1.0.3 of channelmgnt, and thus is safe from this vulnerability. See referenced GHSA-23pc-4339-95vg. |
| CVE-2020-14969 | app/Model/Attribute.php in MISP 2.4.127 lacks an ACL lookup on attribute correlations. This occurs when querying the attribute restsearch API, revealing metadata about a correlating but unreachable attribute. |
| CVE-2020-14196 | In PowerDNS Recursor versions up to and including 4.3.1, 4.2.2 and 4.1.16, the ACL restricting access to the internal web server is not properly enforced. |
| CVE-2020-13564 | A cross-site scripting vulnerability exists in the template functionality of phpGACL 3.3.7. A specially crafted HTTP request can lead to arbitrary JavaScript execution. An attacker can provide a crafted URL to trigger this vulnerability in the phpGACL template acl_id parameter. |
| CVE-2020-12797 | HashiCorp Consul and Consul Enterprise failed to enforce changes to legacy ACL token rules due to non-propagation to secondary data centers. Introduced in 1.4.0, fixed in 1.6.6 and 1.7.4. |
| CVE-2020-11980 | In Karaf, JMX authentication takes place using JAAS and authorization takes place using ACL files. By default, only an "admin" can actually invoke on an MBean. However there is a vulnerability there for someone who is not an admin, but has a "viewer" role. In the 'etc/jmx.acl.cfg', such as role can call get*. It's possible to authenticate as a viewer role + invokes on the MLet getMBeansFromURL method, which goes off to a remote server to fetch the desired MBean, which is then registered in Karaf. At this point the attack fails as "viewer" doesn't have the permission to invoke on the MBean. Still, it could act as a SSRF style attack and also it essentially allows a "viewer" role to pollute the MBean registry, which is a kind of privilege escalation. The vulnerability is low as it's possible to add a ACL to limit access. Users should update to Apache Karaf 4.2.9 or newer. |
| CVE-2020-11891 | An issue was discovered in Joomla! before 3.9.17. Incorrect ACL checks in the access level section of com_users allow the unauthorized editing of usergroups. |
| CVE-2020-11890 | An issue was discovered in Joomla! before 3.9.17. Improper input validations in the usergroup table class could lead to a broken ACL configuration. |
| CVE-2020-11889 | An issue was discovered in Joomla! before 3.9.17. Incorrect ACL checks in the access level section of com_users allow the unauthorized deletion of usergroups. |
| CVE-2020-10238 | An issue was discovered in Joomla! before 3.9.16. Various actions in com_templates lack the required ACL checks, leading to various potential attack vectors. |
| CVE-2020-10145 | The Adobe ColdFusion installer fails to set a secure access-control list (ACL) on the default installation directory, such as C:\ColdFusion2021\. By default, unprivileged users can create files in this directory structure, which creates a privilege-escalation vulnerability. |
| CVE-2020-0058 | In l2c_rcv_acl_data of l2c_main.cc, there is a possible out of bounds read due to an incorrect bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10Android ID: A-141745011 |
| CVE-2019-9883 | Multi modules of MailSherlock MSR35 and MSR45 lead to a CSRF vulnerability. It allows attacker to elevate privilege of specific account via useradmin/cf_new.cgi?chief=&wk_group=full&cf_name=test&cf_account=test&cf_email=&cf_acl=Management&apply_lang=&dn= without any authorizes. |
| CVE-2019-9713 | An issue was discovered in Joomla! before 3.9.4. The sample data plugins lack ACL checks, allowing unauthorized access. |
| CVE-2019-4236 | A IBM Spectrum Protect 7.l client backup or archive operation running for an HP-UX VxFS object is silently skipping Access Control List (ACL) entries from backup or archive if there are more than twelve ACL entries associated with the object in total. As a result, it could allow a local attacker to restore or retrieve the object with incorrect ACL entries. IBM X-Force ID: 159418. |
| CVE-2019-1969 | A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) Access Control List (ACL) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic. The vulnerability is due to an incorrect length check when the configured ACL name is the maximum length, which is 32 ASCII characters. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP polling that should have been denied. The attacker has no control of the configuration of the SNMP ACL name. |
| CVE-2019-19681 | ** DISPUTED ** Pandora FMS 7.x suffers from remote code execution vulnerability. With an authenticated user who can modify the alert system, it is possible to define and execute commands as root/Administrator. NOTE: The product vendor states that the vulnerability as it is described is not in fact an actual vulnerability. They state that to be able to create alert commands, you need to have admin rights. They also state that the extended ACL system can disable access to specific sections of the configuration, such as defining new alert commands. |
| CVE-2019-19104 | The web server in ABB Telephone Gateway TG/S 3.2 and Busch-Jaeger 6186/11 Telefon-Gateway allows access to different endpoints of the application without authenticating by accessing a specific uniform resource locator (URL) , violating the access-control (ACL) rules. This issue allows obtaining sensitive information that may aid in further attacks and privilege escalation. |
| CVE-2019-18614 | On the Cypress CYW20735 evaluation board, any data that exceeds 384 bytes is copied and causes an overflow. This is because the maximum BLOC buffer size for sending and receiving data is set to 384 bytes, but everything else is still configured to the usual size of 1092 (which was used for everything in the previous CYW20719 and later CYW20819 evaluation board). To trigger the overflow, an attacker can either send packets over the air or as unprivileged local user. Over the air, the minimal PoC is sending "l2ping -s 600" to the target address prior to any pairing. Locally, the buffer overflow is immediately triggered by opening an ACL or SCO connection to a headset. This occurs because, in WICED Studio 6.2 and 6.4, BT_ACL_HOST_TO_DEVICE_DEFAULT_SIZE and BT_ACL_DEVICE_TO_HOST_DEFAULT_SIZE are set to 384. |
| CVE-2019-1759 | A vulnerability in access control list (ACL) functionality of the Gigabit Ethernet Management interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XE Software 16.1.1 Release, which prevents the ACL from working when applied against the management interface. An attacker could exploit this issue by attempting to access the device via the management interface. |
| CVE-2019-17190 | A Local Privilege Escalation issue was discovered in Avast Secure Browser 76.0.1659.101. The vulnerability is due to an insecure ACL set by the AvastBrowserUpdate.exe (which is running as NT AUTHORITY\SYSTEM) when AvastSecureBrowser.exe checks for new updates. When the update check is triggered, the elevated process cleans the ACL of the Update.ini file in %PROGRAMDATA%\Avast Software\Browser\Update\ and sets all privileges to group Everyone. Because any low-privileged user can create, delete, or modify the Update.ini file stored in this location, an attacker with low privileges can create a hard link named Update.ini in this folder, and make it point to a file writable by NT AUTHORITY\SYSTEM. Once AvastBrowserUpdate.exe is triggered by the update check functionality, the DACL is set to a misconfigured value on the crafted Update.ini and, consequently, to the target file that was previously not writable by the low-privileged attacker. |
| CVE-2019-1686 | A vulnerability in the TCP flags inspection feature for access control lists (ACLs) on Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass protection offered by a configured ACL on an affected device. The vulnerability is due to incorrect processing of the ACL applied to an interface of an affected device when Cisco Express Forwarding load balancing using the 3-tuple hash algorithm is enabled. An attacker could exploit this vulnerability by sending traffic through an affected device that should otherwise be denied by the configured ACL. An exploit could allow the attacker to bypass protection offered by a configured ACL on the affected device. There are workarounds that address this vulnerability. Affected Cisco IOS XR versions are: Cisco IOS XR Software Release 5.1.1 and later till first fixed. First Fixed Releases: 6.5.2 and later, 6.6.1 and later. |
| CVE-2019-15998 | A vulnerability in the access-control logic of the NETCONF over Secure Shell (SSH) of Cisco IOS XR Software may allow connections despite an access control list (ACL) that is configured to deny access to the NETCONF over SSH of an affected device. The vulnerability is due to a missing check in the NETCONF over SSH access control list (ACL). An attacker could exploit this vulnerability by connecting to an affected device using NETCONF over SSH. A successful exploit could allow the attacker to connect to the device on the NETCONF port. Valid credentials are required to access the device. This vulnerability does not affect connections to the default SSH process on the device. |
| CVE-2019-13565 | An issue was discovered in OpenLDAP 2.x before 2.4.48. When using SASL authentication and session encryption, and relying on the SASL security layers in slapd access controls, it is possible to obtain access that would otherwise be denied via a simple bind for any identity covered in those ACLs. After the first SASL bind is completed, the sasl_ssf value is retained for all new non-SASL connections. Depending on the ACL configuration, this can affect different types of operations (searches, modifications, etc.). In other words, a successful authorization step completed by one user affects the authorization requirement for a different user. |
| CVE-2019-13164 | qemu-bridge-helper.c in QEMU 3.1 and 4.0.0 does not ensure that a network interface name (obtained from bridge.conf or a --br=bridge option) is limited to the IFNAMSIZ size, which can lead to an ACL bypass. |
| CVE-2019-13140 | Inteno EG200 EG200-WU7P1U_ADAMO3.16.4-190226_1650 routers have a JUCI ACL misconfiguration that allows the "user" account to extract the 3DES key via JSON commands to ubus. The 3DES key is used to decrypt the provisioning file provided by Adamo Telecom on a public URL via cleartext HTTP. |
| CVE-2019-12291 | HashiCorp Consul 1.4.0 through 1.5.0 has Incorrect Access Control. Keys not matching a specific ACL rule used for prefix matching in a policy can be deleted by a token using that policy even with default deny settings configured. |
| CVE-2019-12254 | In multiple Tecson Tankspion and GOKs SmartBox 4 products the affected application doesn't properly restrict access to an endpoint that is responsible for saving settings, to a unauthenticated user with limited access rights. Based on the lack of adequately implemented access-control rules, by accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to change the application settings without authenticating at all, which violates originally laid ACL rules. |
| CVE-2019-10509 | Device record of the pairing device used after free during ACL disconnection in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in MSM8909W, MSM8996AU, QCA6574AU, QCS405, QCS605, SD 425, SD 427, SD 430, SD 435, SD 439 / SD 429, SD 450, SD 625, SD 632, SD 636, SD 665, SD 675, SD 712 / SD 710 / SD 670, SD 730, SD 820, SD 820A, SD 835, SD 845 / SD 850, SD 855, SDA660, SDM439, SDM630, SDM660, Snapdragon_High_Med_2016 |
| CVE-2019-10140 | A vulnerability was found in Linux kernel's, versions up to 3.10, implementation of overlayfs. An attacker with local access can create a denial of service situation via NULL pointer dereference in ovl_posix_acl_create function in fs/overlayfs/dir.c. This can allow attackers with ability to create directories on overlayfs to crash the kernel creating a denial of service (DOS). |
| CVE-2019-10128 | A vulnerability was found in postgresql versions 11.x prior to 11.3. The Windows installer for EnterpriseDB-supplied PostgreSQL does not lock down the ACL of the binary installation directory or the ACL of the data directory; it keeps the inherited ACL. In the default configuration, this allows a local attacker to read arbitrary data directory files, essentially bypassing database-imposed read access limitations. In plausible non-default configurations, an attacker having both an unprivileged Windows account and an unprivileged PostgreSQL account can cause the PostgreSQL service account to execute arbitrary code. |
| CVE-2019-10127 | A vulnerability was found in postgresql versions 11.x prior to 11.3. The Windows installer for BigSQL-supplied PostgreSQL does not lock down the ACL of the binary installation directory or the ACL of the data directory; it keeps the inherited ACL. In the default configuration, an attacker having both an unprivileged Windows account and an unprivileged PostgreSQL account can cause the PostgreSQL service account to execute arbitrary code. An attacker having only the unprivileged Windows account can read arbitrary data directory files, essentially bypassing database-imposed read access limitations. An attacker having only the unprivileged Windows account can also delete certain data directory files. |
| CVE-2019-0201 | An issue is present in Apache ZooKeeper 1.0.0 to 3.4.13 and 3.5.0-alpha to 3.5.4-beta. ZooKeeper’s getACL() command doesn’t check any permission when retrieves the ACLs of the requested node and returns all information contained in the ACL Id field as plaintext string. DigestAuthenticationProvider overloads the Id field with the hash value that is used for user authentication. As a consequence, if Digest Authentication is in use, the unsalted hash value will be disclosed by getACL() request for unauthenticated or unprivileged users. |
| CVE-2018-7920 | Huawei AR1200 V200R006C10SPC300, AR160 V200R006C10SPC300, AR200 V200R006C10SPC300, AR2200 V200R006C10SPC300, AR3200 V200R006C10SPC300 devices have an improper resource management vulnerability. Due to the improper implementation of ACL mechanism, a remote attacker may send TCP messages to the management interface of the affected device to exploit this vulnerability. Successful exploit could exhaust the socket resource of management interface, leading to a DoS condition. |
| CVE-2018-6185 | In Cloudera Navigator Key Trustee KMS 5.12 and 5.13, incorrect default ACL values allow remote access to purge and undelete API calls on encryption zone keys. The Navigator Key Trustee KMS includes 2 API calls in addition to those in Apache Hadoop KMS: purge and undelete. The KMS ACL values for these commands are keytrustee.kms.acl.PURGE and keytrustee.kms.acl.UNDELETE respectively. The default value for the ACLs in Key Trustee KMS 5.12.0 and 5.13.0 is "*" which allows anyone with knowledge of the name of an encryption zone key and network access to the Key Trustee KMS to make those calls against known encryption zone keys. This can result in the recovery of a previously deleted, but not purged, key (undelete) or the deletion of a key in active use (purge) resulting in loss of access to encrypted HDFS data. |
| CVE-2018-20145 | Eclipse Mosquitto 1.5.x before 1.5.5 allows ACL bypass: if the option per_listener_settings was set to true, and the default listener was in use, and the default listener specified an acl_file, then the acl file was being ignored. |
| CVE-2018-17989 | A stored XSS vulnerability exists in the web interface on D-Link DSL-3782 devices with firmware 1.01 that allows authenticated attackers to inject a JavaScript or HTML payload inside the ACL page. The injected payload would be executed in a user's browser when "/cgi-bin/New_GUI/Acl.asp" is requested. |
| CVE-2018-17856 | An issue was discovered in Joomla! before 3.8.13. com_joomlaupdate allows the execution of arbitrary code. The default ACL config enabled the ability of Administrator-level users to access com_joomlaupdate and trigger code execution. |
| CVE-2018-17196 | In Apache Kafka versions between 0.11.0.0 and 2.1.0, it is possible to manually craft a Produce request which bypasses transaction/idempotent ACL validation. Only authenticated clients with Write permission on the respective topics are able to exploit this vulnerability. Users should upgrade to 2.1.1 or later where this vulnerability has been fixed. |
| CVE-2018-16418 | A buffer overflow when handling string concatenation in util_acl_to_str in tools/util.c in OpenSC before 0.19.0-rc1 could be used by attackers able to supply crafted smartcards to cause a denial of service (application crash) or possibly have unspecified other impact. |
| CVE-2018-15881 | An issue was discovered in Joomla! before 3.8.12. Inadequate checks regarding disabled fields can lead to an ACL violation. |
| CVE-2018-15398 | A vulnerability in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass an access control list (ACL) that is configured for an interface of an affected device. The vulnerability is due to errors that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit this vulnerability by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to access resources that are behind the affected device and would typically be protected by the interface ACL. |
| CVE-2018-12550 | When Eclipse Mosquitto version 1.0 to 1.5.5 (inclusive) is configured to use an ACL file, and that ACL file is empty, or contains only comments or blank lines, then Mosquitto will treat this as though no ACL file has been defined and use a default allow policy. The new behaviour is to have an empty ACL file mean that all access is denied, which is not a useful configuration but is not unexpected. |
| CVE-2018-1234 | RSA Authentication Agent version 8.0.1 and earlier for Web for IIS is affected by a problem where access control list (ACL) permissions on a Windows Named Pipe were not sufficient to prevent access by unauthorized users. The attacker with local access to the system can exploit this vulnerability to read configuration properties for the authentication agent. |
| CVE-2018-12227 | An issue was discovered in Asterisk Open Source 13.x before 13.21.1, 14.x before 14.7.7, and 15.x before 15.4.1 and Certified Asterisk 13.18-cert before 13.18-cert4 and 13.21-cert before 13.21-cert2. When endpoint specific ACL rules block a SIP request, they respond with a 403 forbidden. However, if an endpoint is not identified, then a 401 unauthorized response is sent. This vulnerability just discloses which requests hit a defined endpoint. The ACL rules cannot be bypassed to gain access to the disclosed endpoints. |
| CVE-2018-11767 | In Apache Hadoop 2.9.0 to 2.9.1, 2.8.3 to 2.8.4, 2.7.5 to 2.7.6, KMS blocking users or granting access to users incorrectly, if the system uses non-default groups mapping mechanisms. |
| CVE-2018-1095 | The ext4_xattr_check_entries function in fs/ext4/xattr.c in the Linux kernel through 4.15.15 does not properly validate xattr sizes, which causes misinterpretation of a size as an error code, and consequently allows attackers to cause a denial of service (get_acl NULL pointer dereference and system crash) via a crafted ext4 image. |
| CVE-2018-1080 | Dogtag PKI, through version 10.6.1, has a vulnerability in AAclAuthz.java that, under certain configurations, causes the application of ACL allow and deny rules to be reversed. If a server is configured to process allow rules before deny rules (authz.evaluateOrder=allow,deny), then allow rules will deny access and deny rules will grant access. This may result in an escalation of privileges or have other unintended consequences. |
| CVE-2018-10079 | Geist WatchDog Console 3.2.2 uses a weak ACL for the C:\ProgramData\WatchDog Console directory, which allows local users to modify configuration data by updating (1) config.xml or (2) servers.xml. |
| CVE-2018-1000879 | libarchive version commit 379867ecb330b3a952fb7bfa7bffb7bbd5547205 onwards (release v3.3.0 onwards) contains a CWE-476: NULL Pointer Dereference vulnerability in ACL parser - libarchive/archive_acl.c, archive_acl_from_text_l() that can result in Crash/DoS. This attack appear to be exploitable via the victim must open a specially crafted archive file. |
| CVE-2018-0250 | A vulnerability in Central Web Authentication (CWA) with FlexConnect Access Points (APs) for Cisco Aironet 1560, 1810, 1810w, 1815, 1830, 1850, 2800, and 3800 Series APs could allow an authenticated, adjacent attacker to bypass a configured FlexConnect access control list (ACL). The vulnerability is due to the AP ignoring the ACL download from the client during authentication. An attacker could exploit this vulnerability by connecting to the targeted device with a vulnerable configuration. A successful exploit could allow the attacker to bypass a configured client FlexConnect ACL. This vulnerability affects the following Cisco products if they are running a vulnerable release of Central Web Authentication with FlexConnect Access Points Software: Aironet 1560 Series Access Points, Aironet 1810 Series OfficeExtend Access Points, Aironet 1810w Series Access Points, Aironet 1815 Series Access Points, Aironet 1830 Series Access Points, Aironet 1850 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: Central Web Authentication with FlexConnect Access Points was an unsupported configuration until 8.5.100.0. Cisco Bug IDs: CSCve17756. |
| CVE-2018-0247 | A vulnerability in Web Authentication (WebAuth) clients for the Cisco Wireless LAN Controller (WLC) and Aironet Access Points running Cisco IOS Software could allow an unauthenticated, adjacent attacker to bypass authentication and pass traffic. The vulnerability is due to incorrect implementation of authentication for WebAuth clients in a specific configuration. An attacker could exploit this vulnerability by sending traffic to local network resources without having gone through authentication. A successful exploit could allow the attacker to bypass authentication and pass traffic. This affects Cisco Aironet Access Points running Cisco IOS Software and Cisco Wireless LAN Controller (WLC) releases prior to 8.5.110.0 for the following specific WLC configuration only: (1) The Access Point (AP) is configured in FlexConnect Mode with NAT. (2) The WLAN is configured for central switching, meaning the client is being assigned a unique IP address. (3) The AP is configured with a Split Tunnel access control list (ACL) for access to local network resources, meaning the AP is doing the NAT on the connection. (4) The client is using WebAuth. This vulnerability does not apply to .1x clients in the same configuration. Cisco Bug IDs: CSCvc79502, CSCvf71789. |
| CVE-2018-0090 | A vulnerability in management interface access control list (ACL) configuration of Cisco NX-OS System Software could allow an unauthenticated, remote attacker to bypass configured ACLs on the management interface. This could allow traffic to be forwarded to the NX-OS CPU for processing, leading to high CPU utilization and a denial of service (DoS) condition. The vulnerability is due to a bad code fix in the 7.3.2 code train that could allow traffic to the management interface to be misclassified and not match the proper configured ACLs. An attacker could exploit this vulnerability by sending crafted traffic to the management interface. An exploit could allow the attacker to bypass the configured management interface ACLs and impact the CPU of the targeted device, resulting in a DoS condition. This vulnerability affects the following Cisco products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvf31132. |
| CVE-2017-9803 | Apache Solr's Kerberos plugin can be configured to use delegation tokens, which allows an application to reuse the authentication of an end-user or another application. There are two issues with this functionality (when using SecurityAwareZkACLProvider type of ACL provider e.g. SaslZkACLProvider). Firstly, access to the security configuration can be leaked to users other than the solr super user. Secondly, malicious users can exploit this leaked configuration for privilege escalation to further expose/modify private data and/or disrupt operations in the Solr cluster. The vulnerability is fixed from Apache Solr 6.6.1 onwards. |
| CVE-2017-8038 | In Cloud Foundry Foundation Credhub-release version 1.1.0, access control lists (ACLs) enforce whether an authenticated user can perform an operation on a credential. For installations using ACLs, the ACL was bypassed for the CredHub interpolate endpoint, allowing authenticated applications to view any credential within the CredHub installation. |
| CVE-2017-6672 | A vulnerability in certain filtering mechanisms of access control lists (ACLs) for Cisco ASR 5000 Series Aggregation Services Routers through 21.x could allow an unauthenticated, remote attacker to bypass ACL rules that have been configured for an affected device. More Information: CSCvb99022 CSCvc16964 CSCvc37351 CSCvc54843 CSCvc63444 CSCvc77815 CSCvc88658 CSCve08955 CSCve14141 CSCve33870. |
| CVE-2017-6620 | A vulnerability in the remote management access control list (ACL) feature of the Cisco CVR100W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass the remote management ACL. The vulnerability is due to incorrect implementation of the ACL decision made during the ingress connection request to the remote management interface. An attacker could exploit this vulnerability by sending a connection to the management IP address or domain name of the targeted device. A successful exploit could allow the attacker to bypass the configured remote management ACL. This can occur when the Remote Management configuration parameter is set to Disabled. This vulnerability affects Cisco CVR100W Wireless-N VPN Routers running a firmware image prior to 1.0.1.24. Cisco Bug IDs: CSCvc14457. |
| CVE-2017-5551 | The simple_set_acl function in fs/posix_acl.c in the Linux kernel before 4.9.6 preserves the setgid bit during a setxattr call involving a tmpfs filesystem, which allows local users to gain group privileges by leveraging the existence of a setgid program with restrictions on execute permissions. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-7097. |
| CVE-2017-3875 | An Access-Control Filtering Mechanisms Bypass vulnerability in certain access-control filtering mechanisms on Cisco Nexus 7000 Series Switches could allow an unauthenticated, remote attacker to bypass defined traffic configured within an access control list (ACL) on the affected system. More Information: CSCtz59354. Known Affected Releases: 5.2(4) 6.1(3)S5 6.1(3)S6 6.2(1.121)S0 7.2(1)D1(1) 7.3(0)ZN(0.161) 7.3(1)N1(0.1). Known Fixed Releases: 7.3(0)D1(1) 6.2(2) 6.1(5) 8.3(0)KMT(0.24) 8.3(0)CV(0.337) 7.3(1)N1(1) 7.3(0)ZN(0.210) 7.3(0)ZN(0.177) 7.3(0)ZD(0.194) 7.3(0)TSH(0.99) 7.3(0)SC(0.14) 7.3(0)RSP(0.7) 7.3(0)N1(1) 7.3(0)N1(0.193) 7.3(0)IZN(0.13) 7.3(0)IB(0.102) 7.3(0)GLF(0.44) 7.3(0)D1(0.178) 7.1(0)D1(0.14) 7.0(3)ITI2(1.6) 7.0(3)ISH1(2.13) 7.0(3)IFD6(0.78) 7.0(3)IFD6(0) 7.0(3)IDE6(0.12) 7.0(3)IDE6(0) 7.0(3)I2(1) 7.0(3)I2(0.315) 7.0(1)ZD(0.3) 7.0(0)ZD(0.84) 6.2(1.149)S0 6.2(0.285) 6.1(5.32)S0 6.1(4.97)S0 6.1(2.30)S0. |
| CVE-2017-3867 | A vulnerability in the Border Gateway Protocol (BGP) Bidirectional Forwarding Detection (BFD) implementation of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to bypass the access control list (ACL) for specific TCP and UDP traffic. More Information: CSCvc68229. Known Affected Releases: 9.6(2). Known Fixed Releases: 99.1(20.1) 99.1(10.2) 98.1(12.7) 98.1(1.49) 97.1(6.58) 97.1(0.134) 96.2(0.109) 9.7(1.1) 9.6(2.99) 9.6(2.8). |
| CVE-2017-3142 | An attacker who is able to send and receive messages to an authoritative DNS server and who has knowledge of a valid TSIG key name may be able to circumvent TSIG authentication of AXFR requests via a carefully constructed request packet. A server that relies solely on TSIG keys for protection with no other ACL protection could be manipulated into: providing an AXFR of a zone to an unauthorized recipient or accepting bogus NOTIFY packets. Affects BIND 9.4.0->9.8.8, 9.9.0->9.9.10-P1, 9.10.0->9.10.5-P1, 9.11.0->9.11.1-P1, 9.9.3-S1->9.9.10-S2, 9.10.5-S1->9.10.5-S2. |
| CVE-2017-18478 | In cPanel before 62.0.4 incorrect ACL checks could occur in xml-api for Rearrange Account actions (SEC-207). |
| CVE-2017-15703 | Any authenticated user (valid client certificate but without ACL permissions) could upload a template which contained malicious code and caused a denial of service via Java deserialization attack. The fix to properly handle Java deserialization was applied on the Apache NiFi 1.4.0 release. Users running a prior 1.x release should upgrade to the appropriate release. |
| CVE-2017-15365 | sql/event_data_objects.cc in MariaDB before 10.1.30 and 10.2.x before 10.2.10 and Percona XtraDB Cluster before 5.6.37-26.21-3 and 5.7.x before 5.7.19-29.22-3 allows remote authenticated users with SQL access to bypass intended access restrictions and replicate data definition language (DDL) statements to cluster nodes by leveraging incorrect ordering of DDL replication and ACL checking. |
| CVE-2017-15302 | In CPUID CPU-Z through 1.81, there are improper access rights to a kernel-mode driver (e.g., cpuz143_x64.sys for version 1.43) that can result in information disclosure or elevation of privileges, because of an arbitrary read of any physical address via ioctl 0x9C402604. Any application running on the system (Windows), including sandboxed users, can issue an ioctl to this driver without any validation. Furthermore, the driver can map any physical page on the system and returns the allocated map page address to the user: that results in an information leak and EoP. NOTE: the vendor indicates that the arbitrary read itself is intentional behavior (for ACPI scan functionality); the security issue is the lack of an ACL. |
| CVE-2017-15093 | When api-config-dir is set to a non-empty value, which is not the case by default, the API in PowerDNS Recursor 4.x up to and including 4.0.6 and 3.x up to and including 3.7.4 allows an authorized user to update the Recursor's ACL by adding and removing netmasks, and to configure forward zones. It was discovered that the new netmask and IP addresses of forwarded zones were not sufficiently validated, allowing an authenticated user to inject new configuration directives into the Recursor's configuration. |
| CVE-2017-12787 | A network interface of the novi_process_manager_daemon service, included in the NoviWare software distribution through NW400.2.6 and deployed on NoviSwitch devices, can be inadvertently exposed if an operator attempts to modify ACLs, because of a bug when ACL modifications are applied. This could be leveraged by remote, unauthenticated attackers to gain resultant privileged (root) code execution on the switch, because incoming packet data can contain embedded OS commands, and can also trigger a stack-based buffer overflow. |
| CVE-2017-12786 | Network interfaces of the cliengine and noviengine services, included in the NoviWare software distribution through NW400.2.6 and deployed on NoviSwitch devices, can be inadvertently exposed if an operator attempts to modify ACLs, because of a bug when ACL modifications are applied. This could be leveraged by remote, unauthenticated attackers to gain resultant privileged (root) code execution on the switch, because there is a stack-based buffer overflow during unserialization of packet data. |
| CVE-2017-12213 | A vulnerability in the dynamic access control list (ACL) feature of Cisco IOS XE Software running on Cisco Catalyst 4000 Series Switches could allow an unauthenticated, adjacent attacker to cause dynamic ACL assignment to fail and the port to fail open. This could allow the attacker to pass traffic to the default VLAN of the affected port. The vulnerability is due to an uncaught error condition that may occur during the reassignment of the auth-default-ACL dynamic ACL to a switch port after 802.1x authentication fails. A successful exploit of this issue could allow a physically adjacent attacker to bypass 802.1x authentication and cause the affected port to fail open, allowing the attacker to pass traffic to the default VLAN of the affected switch port. Cisco Bug IDs: CSCvc72751. |
| CVE-2017-11361 | Inteno routers have a JUCI ACL misconfiguration that allows the "user" account to read files, write to files, and add root SSH keys via JSON commands to ubus. (Exploitation is sometimes easy because the "user" password might be "user" or might match the Wi-Fi key.) |
| CVE-2017-11104 | Knot DNS before 2.4.5 and 2.5.x before 2.5.2 contains a flaw within the TSIG protocol implementation that would allow an attacker with a valid key name and algorithm to bypass TSIG authentication if no additional ACL restrictions are set, because of an improper TSIG validity period check. |
| CVE-2016-9167 | NDSD in Novell eDirectory before 9.0.2 did not calculate ACLs on LDAP objects across partition boundaries correctly, which could lead to a privilege escalation by modifying user attributes that would otherwise be filtered by an ACL. |
| CVE-2016-7253 | The agent in Microsoft SQL Server 2012 SP2, 2012 SP3, 2014 SP1, 2014 SP2, and 2016 does not properly check the atxcore.dll ACL, which allows remote authenticated users to gain privileges via unspecified vectors, aka "SQL Server Agent Elevation of Privilege Vulnerability." |
| CVE-2016-7097 | The filesystem implementation in the Linux kernel through 4.8.2 preserves the setgid bit during a setxattr call, which allows local users to gain group privileges by leveraging the existence of a setgid program with restrictions on execute permissions. |
| CVE-2016-7031 | The RGW code in Ceph before 10.0.1, when authenticated-read ACL is applied to a bucket, allows remote attackers to list the bucket contents via a URL. |
| CVE-2016-6422 | Cisco IOS 12.2(33)SXJ9 on Supervisor Engine 32 and 720 modules for 6500 and 7600 devices mishandles certain operators, flags, and keywords in TCAM share ACLs, which allows remote attackers to bypass intended access restrictions by sending packets that should have been recognized by a filter, aka Bug ID CSCuy64806. |
| CVE-2016-5821 | Huawei HiSuite before 4.0.4.204_ove (Out of China) and before 4.0.4.301 (China) use a weak ACL (FILE_WRITE_DATA for BUILTIN\Users) for the HiSuite service directory, which allows local users to gain SYSTEM privileges via a Trojan horse (1) SspiCli.dll or (2) USERENV.dll file or possibly other unspecified DLL files. |
| CVE-2016-5374 | NetApp Data ONTAP 9.0 and 9.1 before 9.1P1 allows remote authenticated users that own SMB-hosted data to bypass intended sharing restrictions by leveraging improper handling of the owner_rights ACL entry. |
| CVE-2016-3943 | Panda Endpoint Administration Agent before 7.50.00, as used in Panda Security for Business products for Windows, uses a weak ACL for the Panda Security/WaAgent directory and sub-directories, which allows local users to gain SYSTEM privileges by modifying an executable module. |
| CVE-2016-2855 | The Huawei Mobile Broadband HL Service 22.001.25.00.03 and earlier uses a weak ACL for the MobileBrServ program data directory, which allows local users to gain SYSTEM privileges by modifying VERSION.dll. |
| CVE-2016-2854 | The aufs module for the Linux kernel 3.x and 4.x does not properly maintain POSIX ACL xattr data, which allows local users to gain privileges by leveraging a group-writable setgid directory. |
| CVE-2016-2016 | Base-VxFS-50 B.05.00.01 through B.05.00.02, Base-VxFS-501 B.05.01.0 through B.05.01.03, and Base-VxFS-51 B.05.10.00 through B.05.10.02 on HPE HP-UX 11iv3 with VxFS 5.0, VxFS 5.0.1, and VxFS 5.1SP1 mishandles ACL inheritance for default:class: entries, default:other: entries, and default:user: entries, which allows local users to bypass intended access restrictions by leveraging the configuration of a parent directory. |
| CVE-2016-1575 | The overlayfs implementation in the Linux kernel through 4.5.2 does not properly maintain POSIX ACL xattr data, which allows local users to gain privileges by leveraging a group-writable setgid directory. |
| CVE-2016-1237 | nfsd in the Linux kernel through 4.6.3 allows local users to bypass intended file-permission restrictions by setting a POSIX ACL, related to nfs2acl.c, nfs3acl.c, and nfs4acl.c. |
| CVE-2016-10852 | cPanel before 11.54.0.4 lacks ACL enforcement in the AppConfig subsystem (SEC-85). |
| CVE-2016-10830 | cPanel before 55.9999.141 allows ACL bypass for AppConfig applications via magic_revision (SEC-100). |
| CVE-2016-10072 | ** DISPUTED ** WampServer 3.0.6 has two files called 'wampmanager.exe' and 'unins000.exe' with a weak ACL for Modify. This could potentially allow an authorized but non-privileged local user to execute arbitrary code with elevated privileges on the system. To properly exploit this vulnerability, the local attacker must insert an executable file called wampmanager.exe or unins000.exe and replace the original files. The next time one of these programs is launched by a more privileged user, malicious code chosen by the local attacker will run. NOTE: the vendor disputes the relevance of this report, taking the position that a configuration in which "'someone' (an attacker) is able to replace files on a PC" is not "the fault of WampServer." |
| CVE-2016-0707 | The agent in Apache Ambari before 2.1.2 uses weak permissions for the (1) /var/lib/ambari-agent/data and (2) /var/lib/ambari-agent/keys directories, which allows local users to obtain sensitive information by reading files in the directories. |
| CVE-2015-8467 | The samldb_check_user_account_control_acl function in dsdb/samdb/ldb_modules/samldb.c in Samba 4.x before 4.1.22, 4.2.x before 4.2.7, and 4.3.x before 4.3.3 does not properly check for administrative privileges during creation of machine accounts, which allows remote authenticated users to bypass intended access restrictions by leveraging the existence of a domain with both a Samba DC and a Windows DC, a similar issue to CVE-2015-2535. |
| CVE-2015-7967 | SafeNet Authentication Service for Citrix Web Interface Agent uses a weak ACL for unspecified installation directories and executable modules, which allows local users to gain privileges by modifying an executable module. |
| CVE-2015-7966 | SafeNet Authentication Service Windows Logon Agent uses a weak ACL for unspecified installation directories and executable modules, which allows local users to gain privileges by modifying an executable module, a different vulnerability than CVE-2015-7965. |
| CVE-2015-7965 | SafeNet Authentication Service Windows Logon Agent uses a weak ACL for unspecified installation directories and executable modules, which allows local users to gain privileges by modifying an executable module, a different vulnerability than CVE-2015-7966. |
| CVE-2015-7964 | SafeNet Authentication Service for NPS Agent uses a weak ACL for unspecified installation directories and executable modules, which allows local users to gain privileges by modifying an executable module. |
| CVE-2015-7963 | SafeNet Authentication Service for AD FS Agent uses a weak ACL for unspecified installation directories and executable modules, which allows local users to gain privileges by modifying an executable module. |
| CVE-2015-7962 | SafeNet Authentication Service for Outlook Web App Agent uses a weak ACL for unspecified installation directories and executable modules, which allows local users to gain privileges by modifying an executable module. |
| CVE-2015-7961 | SafeNet Authentication Service Remote Web Workplace Agent uses a weak ACL for unspecified installation directories and executable modules, which allows local users to gain privileges by modifying an executable module. |
| CVE-2015-7598 | SafeNet Authentication Service TokenValidator Proxy Agent uses a weak ACL for unspecified installation directories and executable modules, which allows local users to gain privileges by modifying an executable module. |
| CVE-2015-7597 | SafeNet Authentication Service IIS Agent uses a weak ACL for unspecified installation directories and executable modules, which allows local users to gain privileges by modifying an executable module. |
| CVE-2015-7596 | SafeNet Authentication Service End User Software Tools for Windows uses a weak ACL for unspecified installation directories and executable modules, which allows local users to gain privileges by modifying an executable module. |
| CVE-2015-7560 | The SMB1 implementation in smbd in Samba 3.x and 4.x before 4.1.23, 4.2.x before 4.2.9, 4.3.x before 4.3.6, and 4.4.x before 4.4.0rc4 allows remote authenticated users to modify arbitrary ACLs by using a UNIX SMB1 call to create a symlink, and then using a non-UNIX SMB1 call to write to the ACL content. |
| CVE-2015-7378 | Panda Security URL Filtering before 4.3.1.9 uses a weak ACL for the "Panda Security URL Filtering" directory and installed files, which allows local users to gain SYSTEM privileges by modifying Panda_URL_Filteringb.exe. |
| CVE-2015-7265 | Facebook Proxygen before 2015-11-09 mismanages HTTPMessage.request state, which allows remote attackers to conduct hijacking attacks and bypass ACL checks. |
| CVE-2015-7263 | The SPDY/2 codec in Facebook Proxygen before 2015-11-09 allows remote attackers to conduct hijacking attacks and bypass ACL checks via a crafted host value. |
| CVE-2015-6423 | The DCERPC Inspection implementation in Cisco Adaptive Security Appliance (ASA) Software 9.4.1 through 9.5.1 allows remote authenticated users to bypass an intended DCERPC-only ACL by sending arbitrary network traffic, aka Bug ID CSCuu67782. |
| CVE-2015-5313 | Directory traversal vulnerability in the virStorageBackendFileSystemVolCreate function in storage/storage_backend_fs.c in libvirt, when fine-grained Access Control Lists (ACL) are in effect, allows local users with storage_vol:create ACL but not domain:write permission to write to arbitrary files via a .. (dot dot) in a volume name. |
| CVE-2015-3787 | The Bluetooth subsystem in Apple OS X before 10.10.5 allows remote attackers to cause a denial of service via malformed Bluetooth ACL packets. |
| CVE-2015-2534 | Hyper-V in Microsoft Windows 8.1, Windows Server 2012 R2, and Windows 10 improperly processes ACL settings, which allows local users to bypass intended network-traffic restrictions via a crafted application, aka "Hyper-V Security Feature Bypass Vulnerability." |
| CVE-2015-2172 | DokuWiki before 2014-05-05d and before 2014-09-29c does not properly check permissions for the ACL plugins, which allows remote authenticated users to gain privileges and add or delete ACL rules via a request to the XMLRPC API. |
| CVE-2015-1867 | Pacemaker before 1.1.13 does not properly evaluate added nodes, which allows remote read-only users to gain privileges via an acl command. |
| CVE-2015-1158 | The add_job function in scheduler/ipp.c in cupsd in CUPS before 2.0.3 performs incorrect free operations for multiple-value job-originating-host-name attributes, which allows remote attackers to trigger data corruption for reference-counted strings via a crafted (1) IPP_CREATE_JOB or (2) IPP_PRINT_JOB request, as demonstrated by replacing the configuration file and consequently executing arbitrary code. |
| CVE-2015-0695 | Cisco IOS XR 4.3.4 through 5.3.0 on ASR 9000 devices, when uRPF, PBR, QoS, or an ACL is configured, does not properly handle bridge-group virtual interface (BVI) traffic, which allows remote attackers to cause a denial of service (chip and card hangs and reloads) by triggering use of a BVI interface for IPv4 packets, aka Bug ID CSCur62957. |
| CVE-2015-0694 | Cisco ASR 9000 devices with software 5.3.0.BASE do not recognize that certain ACL entries have a single-host constraint, which allows remote attackers to bypass intended network-resource access restrictions by using an address that was not supposed to have been allowed, aka Bug ID CSCur28806. |
| CVE-2015-0610 | Race condition in the object-group ACL feature in Cisco IOS 15.5(2)T and earlier allows remote attackers to bypass intended access restrictions via crafted network traffic that triggers improper handling of the timing of process switching and Cisco Express Forwarding (CEF) switching, aka Bug ID CSCun21071. |
| CVE-2014-9751 | The read_network_packet function in ntp_io.c in ntpd in NTP 4.x before 4.2.8p1 on Linux and OS X does not properly determine whether a source IP address is an IPv6 loopback address, which makes it easier for remote attackers to spoof restricted packets, and read or write to the runtime state, by leveraging the ability to reach the ntpd machine's network interface with a packet from the ::1 address. |
| CVE-2014-9710 | The Btrfs implementation in the Linux kernel before 3.19 does not ensure that the visible xattr state is consistent with a requested replacement, which allows local users to bypass intended ACL settings and gain privileges via standard filesystem operations (1) during an xattr-replacement time window, related to a race condition, or (2) after an xattr-replacement attempt that fails because the data does not fit. |
| CVE-2014-9587 | Multiple cross-site request forgery (CSRF) vulnerabilities in Roundcube Webmail before 1.0.4 allow remote attackers to hijack the authentication of unspecified victims via unknown vectors, related to (1) address book operations or the (2) ACL or (3) Managesieve plugins. |
| CVE-2014-9049 | The documents application in ownCloud Server 6.x before 6.0.6 and 7.x before 7.0.3 allows remote authenticated users to obtain all valid session IDs via an unspecified API method. |
| CVE-2014-8989 | The Linux kernel through 3.17.4 does not properly restrict dropping of supplemental group memberships in certain namespace scenarios, which allows local users to bypass intended file permissions by leveraging a POSIX ACL containing an entry for the group category that is more restrictive than the entry for the other category, aka a "negative groups" issue, related to kernel/groups.c, kernel/uid16.c, and kernel/user_namespace.c. |
| CVE-2014-8831 | security_taskgate in Apple OS X before 10.10.2 allows attackers to read group-ACL-restricted keychain items of arbitrary apps via a crafted app with a signature from a (1) self-signed certificate or (2) Developer ID certificate. |
| CVE-2014-8762 | The ajax_mediadiff function in DokuWiki before 2014-05-05a allows remote attackers to access arbitrary images via a crafted namespace in the ns parameter. |
| CVE-2014-8761 | inc/template.php in DokuWiki before 2014-05-05a only checks for access to the root namespace, which allows remote attackers to access arbitrary images via a media file details ajax call. |
| CVE-2014-8413 | The res_pjsip_acl module in Asterisk Open Source 12.x before 12.7.1 and 13.x before 13.0.1 does not properly create and load ACLs defined in pjsip.conf at startup, which allows remote attackers to bypass intended PJSIP ACL rules. |
| CVE-2014-8412 | The (1) VoIP channel drivers, (2) DUNDi, and (3) Asterisk Manager Interface (AMI) in Asterisk Open Source 1.8.x before 1.8.32.1, 11.x before 11.14.1, 12.x before 12.7.1, and 13.x before 13.0.1 and Certified Asterisk 1.8.28 before 1.8.28-cert3 and 11.6 before 11.6-cert8 allows remote attackers to bypass the ACL restrictions via a packet with a source IP that does not share the address family as the first ACL entry. |
| CVE-2014-8358 | Huawei EC156, EC176, and EC177 USB Modem products with software before UTPS-V200R003B015D02SP07C1014 (23.015.02.07.1014) and before V200R003B015D02SP08C1014 (23.015.02.08.1014) use a weak ACL for the "Mobile Partner" directory, which allows remote attackers to gain SYSTEM privileges by compromising a low privilege account and modifying Mobile Partner.exe. |
| CVE-2014-8136 | The (1) qemuDomainMigratePerform and (2) qemuDomainMigrateFinish2 functions in qemu/qemu_driver.c in libvirt do not unlock the domain when an ACL check fails, which allow local users to cause a denial of service via unspecified vectors. |
| CVE-2014-8131 | The qemu implementation of virConnectGetAllDomainStats in libvirt before 1.2.11 does not properly handle locks when a domain is skipped due to ACL restrictions, which allows a remote authenticated users to cause a denial of service (deadlock or segmentation fault and crash) via a request to access the users does not have privileges to access. |
| CVE-2014-3739 | Open redirect vulnerability in zport/acl_users/cookieAuthHelper/login_form in Zenoss 4.2.5 allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via a URL in the came_from parameter. |
| CVE-2014-3396 | Cisco IOS XR on ASR 9000 devices does not properly use compression for port-range and address-range encoding, which allows remote attackers to bypass intended Typhoon line-card ACL restrictions via transit traffic, aka Bug ID CSCup30133. |
| CVE-2014-3106 | IBM Rational ClearQuest 7.1 before 7.1.2.15, 8.0.0 before 8.0.0.12, and 8.0.1 before 8.0.1.5 does not properly implement the Local Access Only protection mechanism, which allows remote attackers to bypass authentication and read files via the Help Server Administration feature. |
| CVE-2014-2884 | The ProcessVolumeDeviceControlIrp function in Ntdriver.c in TrueCrypt 7.1a allows local users to bypass access restrictions and obtain sensitive information about arbitrary files via a (1) TC_IOCTL_OPEN_TEST or (2) TC_IOCTL_GET_SYSTEM_DRIVE_CONFIG IOCTL call. |
| CVE-2014-2629 | HP NonStop Safeguard Security Software G, H06.03 through H06.28.01, and J06.03 through J06.17.01 does not properly evaluate the DISKFILE-PATTERN ACL of a program object file, which allows remote authenticated users to bypass intended restrictions on program access via vectors related to process-creation time. |
| CVE-2014-1264 | Finder in Apple OS X before 10.9.2 does not ensure ACL integrity after the viewing of file ACL information, which allows local users to bypass intended access restrictions in opportunistic circumstances via standard filesystem operations on a file with a damaged ACL. |
| CVE-2014-1213 | Sophos Anti-Virus engine (SAVi) before 3.50.1, as used in VDL 4.97G 9.7.x before 9.7.9, 10.0.x before 10.0.11, and 10.3.x before 10.3.1 does not set an ACL for certain global and session objects, which allows local users to bypass anti-virus protection, cause a denial of service (resource consumption, CPU consumption, and eventual crash) or spoof "ready for update" messages by performing certain operations on mutexes or events including (1) DataUpdateRequest, (2) MmfMutexSAV-****, (3) MmfMutexSAV-Info, (4) ReadyForUpdateSAV-****, (5) ReadyForUpdateSAV-Info, (6) SAV-****, (7) SAV-Info, (8) StateChange, (9) SuspendedSAV-****, (10) SuspendedSAV-Info, (11) UpdateComplete, (12) UpdateMutex, (13) UpdateRequest, or (14) SophosALMonSessionInstance, as demonstrated by triggering a ReadyForUpdateSAV event and modifying the UpdateComplete, UpdateMutex, and UpdateRequest objects. |
| CVE-2014-0875 | Active Cloud Engine (ACE) in IBM Storwize V7000 Unified 1.3.0.0 through 1.4.3.x allows remote attackers to bypass intended ACL restrictions in opportunistic circumstances by leveraging incorrect ACL synchronization over an unreliable NFS connection that requires retransmissions. |
| CVE-2014-0685 | Cisco Nexus 1000V InterCloud 5.2(1)IC1(1.2) and earlier for VMware allows remote attackers to bypass ACL deny statements via crafted (1) IGMPv2 or (2) IGMPv3 packets, aka Bug ID CSCug61691. |
| CVE-2014-0212 | qpid-cpp: ACL policies only loaded if the acl-file option specified enabling DoS by consuming all available file descriptors |
| CVE-2014-0028 | libvirt 1.1.1 through 1.2.0 allows context-dependent attackers to bypass the domain:getattr and connect:search_domains restrictions in ACLs and obtain sensitive domain object information via a request to the (1) virConnectDomainEventRegister and (2) virConnectDomainEventRegisterAny functions in the event registration API. |
| CVE-2013-6442 | The owner_set function in smbcacls.c in smbcacls in Samba 4.0.x before 4.0.16 and 4.1.x before 4.1.6 removes an ACL during use of a --chown or --chgrp option, which allows remote attackers to bypass intended access restrictions in opportunistic circumstances by leveraging an unintended administrative change. |
| CVE-2013-6230 | The Winsock WSAIoctl API in Microsoft Windows Server 2008, as used in ISC BIND 9.6-ESV before 9.6-ESV-R10-P1, 9.8 before 9.8.6-P1, 9.9 before 9.9.4-P1, 9.9.3-S1, 9.9.4-S1, and other products, does not properly support the SIO_GET_INTERFACE_LIST command for netmask 255.255.255.255, which allows remote attackers to bypass intended IP address restrictions by leveraging misinterpretation of this netmask as a 0.0.0.0 netmask. |
| CVE-2013-5717 | The Bluetooth HCI ACL dissector in Wireshark 1.10.x before 1.10.2 does not properly maintain a certain free list, which allows remote attackers to cause a denial of service (application crash) via a crafted packet that is not properly handled by the wmem_block_alloc function in epan/wmem/wmem_allocator_block.c. |
| CVE-2013-4591 | Buffer overflow in the __nfs4_get_acl_uncached function in fs/nfs/nfs4proc.c in the Linux kernel before 3.7.2 allows local users to cause a denial of service (memory corruption and system crash) or possibly have unspecified other impact via a getxattr system call for the system.nfs4_acl extended attribute of a pathname on an NFSv4 filesystem. |
| CVE-2013-4475 | Samba 3.2.x through 3.6.x before 3.6.20, 4.0.x before 4.0.11, and 4.1.x before 4.1.1, when vfs_streams_depot or vfs_streams_xattr is enabled, allows remote attackers to bypass intended file restrictions by leveraging ACL differences between a file and an associated alternate data stream (ADS). |
| CVE-2013-4435 | Salt (aka SaltStack) 0.15.0 through 0.17.0 allows remote authenticated users who are using external authentication or client ACL to execute restricted routines by embedding the routine in another routine. |
| CVE-2013-4200 | The isURLInPortal method in the URLTool class in in_portal.py in Plone 2.1 through 4.1, 4.2.x through 4.2.5, and 4.3.x through 4.3.1 treats URLs starting with a space as a relative URL, which allows remote attackers to bypass the allow_external_login_sites filtering property, redirect users to arbitrary web sites, and conduct phishing attacks via a space before a URL in the "next" parameter to acl_users/credentials_cookie_auth/require_login. |
| CVE-2013-4090 | Varnish HTTP cache before 3.0.4: ACL bug |
| CVE-2013-2219 | The Red Hat Directory Server before 8.2.11-13 and 389 Directory Server do not properly restrict access to entity attributes, which allows remote authenticated users to obtain sensitive information via a search query for the attribute. |
| CVE-2013-1863 | Samba 4.x before 4.0.4, when configured as an Active Directory domain controller, uses world-writable permissions on non-default CIFS shares, which allows remote authenticated users to read, modify, create, or delete arbitrary files via standard filesystem operations. |
| CVE-2013-1841 | Net-Server, when the reverse-lookups option is enabled, does not check if the hostname resolves to the source IP address, which might allow remote attackers to bypass ACL restrictions via the hostname parameter. |
| CVE-2013-1794 | Buffer overflow in certain client utilities in OpenAFS before 1.6.2 allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a long fileserver ACL entry. |
| CVE-2013-1195 | The time-based ACL implementation on Cisco Adaptive Security Appliances (ASA) devices, and in Cisco Firewall Services Module (FWSM), does not properly handle periodic statements for the time-range command, which allows remote attackers to bypass intended access restrictions by sending network traffic during denied time periods, aka Bug IDs CSCuf79091 and CSCug45850. |
| CVE-2012-5671 | Heap-based buffer overflow in the dkim_exim_query_dns_txt function in dkim.c in Exim 4.70 through 4.80, when DKIM support is enabled and acl_smtp_connect and acl_smtp_rcpt are not set to "warn control = dkim_disable_verify," allows remote attackers to execute arbitrary code via an email from a malicious DNS server. |
| CVE-2012-5611 | Stack-based buffer overflow in the acl_get function in Oracle MySQL 5.5.19 and other versions through 5.5.28, and 5.1.53 and other versions through 5.1.66, and MariaDB 5.5.2.x before 5.5.28a, 5.3.x before 5.3.11, 5.2.x before 5.2.13 and 5.1.x before 5.1.66, allows remote authenticated users to execute arbitrary code via a long argument to the GRANT FILE command. |
| CVE-2012-5037 | The ACL implementation in Cisco IOS before 15.1(1)SY on Catalyst 6500 and 7600 devices allows local users to cause a denial of service (device reload) via a "no object-group" command followed by an object-group command, aka Bug ID CSCts16133. |
| CVE-2012-4737 | channels/chan_iax2.c in Asterisk Open Source 1.8.x before 1.8.15.1 and 10.x before 10.7.1, Certified Asterisk 1.8.11 before 1.8.11-cert7, Asterisk Digiumphones 10.x.x-digiumphones before 10.7.1-digiumphones, and Asterisk Business Edition C.3.x before C.3.7.6 does not enforce ACL rules during certain uses of peer credentials, which allows remote authenticated users to bypass intended outbound-call restrictions by leveraging the availability of these credentials. |
| CVE-2012-4450 | 389 Directory Server 1.2.10 does not properly update the ACL when a DN entry is moved by a modrdn operation, which allows remote authenticated users with certain permissions to bypass ACL restrictions and access the DN entry. |
| CVE-2012-4446 | The default configuration for Apache Qpid 0.20 and earlier, when the federation_tag attribute is enabled, accepts AMQP connections without checking the source user ID, which allows remote attackers to bypass authentication and have other unspecified impact via an AMQP request. |
| CVE-2012-4430 | The dump_resource function in dird/dird_conf.c in Bacula before 5.2.11 does not properly enforce ACL rules, which allows remote authenticated users to obtain resource dump information via unspecified vectors. |
| CVE-2012-4425 | libgio, when used in setuid or other privileged programs in spice-gtk and possibly other products, allows local users to gain privileges and execute arbitrary code via the DBUS_SYSTEM_BUS_ADDRESS environment variable. NOTE: it could be argued that this is a vulnerability in the applications that do not cleanse environment variables, not in libgio itself. |
| CVE-2012-4404 | security/__init__.py in MoinMoin 1.9 through 1.9.4 does not properly handle group names that contain virtual group names such as "All," "Known," or "Trusted," which allows remote authenticated users with virtual group membership to be treated as a member of the group. |
| CVE-2012-4289 | epan/dissectors/packet-afp.c in the AFP dissector in Wireshark 1.4.x before 1.4.15, 1.6.x before 1.6.10, and 1.8.x before 1.8.2 allows remote attackers to cause a denial of service (loop and CPU consumption) via a large number of ACL entries. |
| CVE-2012-3946 | Cisco IOS before 15.3(2)S allows remote attackers to bypass interface ACL restrictions in opportunistic circumstances by sending IPv6 packets in an unspecified scenario in which expected packet drops do not occur for "a small percentage" of the packets, aka Bug ID CSCty73682. |
| CVE-2012-3924 | The SSLVPN implementation in Cisco IOS 15.1 and 15.2, when DTLS is enabled, does not properly handle certain outbound ACL configurations, which allows remote authenticated users to cause a denial of service (device crash) via a session involving a PPP over ATM (PPPoA) interface, aka Bug ID CSCty97961. |
| CVE-2012-3923 | The SSLVPN implementation in Cisco IOS 12.4, 15.0, 15.1, and 15.2, when DTLS is not enabled, does not properly handle certain outbound ACL configurations, which allows remote authenticated users to cause a denial of service (device crash) via a session involving a PPP over ATM (PPPoA) interface, aka Bug ID CSCte41827. |
| CVE-2012-2375 | The __nfs4_get_acl_uncached function in fs/nfs/nfs4proc.c in the NFSv4 implementation in the Linux kernel before 3.3.2 uses an incorrect length variable during a copy operation, which allows remote NFS servers to cause a denial of service (OOPS) by sending an excessive number of bitmap words in an FATTR4_ACL reply. NOTE: this vulnerability exists because of an incomplete fix for CVE-2011-4131. |
| CVE-2012-2213 | ** DISPUTED ** Squid 3.1.9 allows remote attackers to bypass the access configuration for the CONNECT method by providing an arbitrary allowed hostname in the Host HTTP header. NOTE: this issue might not be reproducible, because the researcher is unable to provide a squid.conf file for a vulnerable system, and the observed behavior is consistent with a squid.conf file that was (perhaps inadvertently) designed to allow access based on a "req_header Host" acl regex that matches www.uol.com.br. |
| CVE-2012-1922 | Multiple cross-site request forgery (CSRF) vulnerabilities in Sitecom WLM-2501 allow remote attackers to hijack the authentication of administrators for requests that modify settings for (1) Mac Filtering via admin/formFilter, (2) IP/Port Filtering via formFilter, (3) Port Forwarding via formPortFw, (4) Wireless Access Control via admin/formWlAc, (5) Wi-Fi Protected Setup via formWsc, (6) URL Blocking Filter via formURL, (7) Domain Blocking Filter via formDOMAINBLK, and (8) IP Address ACL Filter via admin/formACL in goform/, different vectors than CVE-2012-1921. |
| CVE-2012-1518 | VMware Workstation 8.x before 8.0.2, VMware Player 4.x before 4.0.2, VMware Fusion 4.x before 4.1.2, VMware ESXi 3.5 through 5.0, and VMware ESX 3.5 through 4.1 use an incorrect ACL for the VMware Tools folder, which allows guest OS users to gain guest OS privileges via unspecified vectors. |
| CVE-2012-1342 | Cisco Carrier Routing System (CRS) 3.9, 4.0, and 4.1 allows remote attackers to bypass ACL entries via fragmented packets, aka Bug ID CSCtj10975. |
| CVE-2012-0833 | The acllas__handle_group_entry function in servers/plugins/acl/acllas.c in 389 Directory Server before 1.2.10 does not properly handled access control instructions (ACIs) that use certificate groups, which allows remote authenticated LDAP users with a certificate group to cause a denial of service (infinite loop and CPU consumption) by binding to the server. |
| CVE-2012-0475 | Mozilla Firefox 4.x through 11.0, Thunderbird 5.0 through 11.0, and SeaMonkey before 2.9 do not properly construct the Origin and Sec-WebSocket-Origin HTTP headers, which might allow remote attackers to bypass an IPv6 literal ACL via a cross-site (1) XMLHttpRequest or (2) WebSocket operation involving a nonstandard port number and an IPv6 address that contains certain zero fields. |
| CVE-2012-0362 | The extended ACL functionality in Cisco IOS 12.2(58)SE2 and 15.0(1)SE discards all lines that end with a log or time keyword, which allows remote attackers to bypass intended access restrictions in opportunistic circumstances by sending network traffic, aka Bug ID CSCts01106. |
| CVE-2012-0038 | Integer overflow in the xfs_acl_from_disk function in fs/xfs/xfs_acl.c in the Linux kernel before 3.1.9 allows local users to cause a denial of service (panic) via a filesystem with a malformed ACL, leading to a heap-based buffer overflow. |
| CVE-2011-4131 | The NFSv4 implementation in the Linux kernel before 3.2.2 does not properly handle bitmap sizes in GETACL replies, which allows remote NFS servers to cause a denial of service (OOPS) by sending an excessive number of bitmap words. |
| CVE-2011-4012 | Cisco IOS 12.0, 15.0, and 15.1, when a Policy Feature Card 3C (PFC3C) is used, does not create a fragment entry during processing of an ICMPv6 ACL, which has unspecified impact and remote attack vectors, aka Bug ID CSCtj90091. |
| CVE-2011-2760 | Brocade BigIron RX switches allow remote attackers to bypass ACL rules by using 179 as the source port of a packet. |
| CVE-2011-2581 | The ACL implementation in Cisco NX-OS 5.0(2) and 5.0(3) before 5.0(3)N2(1) on Nexus 5000 series switches, and NX-OS before 5.0(3)U1(2a) on Nexus 3000 series switches, does not properly handle comments in conjunction with deny statements, which allows remote attackers to bypass intended access restrictions in opportunistic circumstances by sending packets, aka Bug IDs CSCto09813 and CSCtr61490. |
| CVE-2011-2518 | The tomoyo_mount_acl function in security/tomoyo/mount.c in the Linux kernel before 2.6.39.2 calls the kern_path function with arguments taken directly from a mount system call, which allows local users to cause a denial of service (OOPS) or possibly have unspecified other impact via a NULL value for the device name. |
| CVE-2011-1739 | The makemask function in mountd.c in mountd in FreeBSD 7.4 through 8.2 does not properly handle a -network field specifying a CIDR block with a prefix length that is not an integer multiple of 8, which allows remote attackers to bypass intended access restrictions in opportunistic circumstances via an NFS mount request. |
| CVE-2011-1499 | acl.c in Tinyproxy before 1.8.3, when an Allow configuration setting specifies a CIDR block, permits TCP connections from all IP addresses, which makes it easier for remote attackers to hide the origin of web traffic by leveraging the open HTTP proxy server. |
| CVE-2011-1090 | The __nfs4_proc_set_acl function in fs/nfs/nfs4proc.c in the Linux kernel before 2.6.38 stores NFSv4 ACL data in memory that is allocated by kmalloc but not properly freed, which allows local users to cause a denial of service (panic) via a crafted attempt to set an ACL. |
| CVE-2010-4763 | The ACL-customer-status Ticket Type setting in Open Ticket Request System (OTRS) before 3.0.0-beta1 does not restrict the ticket options after an AJAX reload, which allows remote authenticated users to bypass intended ACL restrictions on the (1) Status, (2) Service, and (3) Queue via selections. |
| CVE-2010-4707 | The check_acl function in pam_xauth.c in the pam_xauth module in Linux-PAM (aka pam) 1.1.2 and earlier does not verify that a certain ACL file is a regular file, which might allow local users to cause a denial of service (resource consumption) via a special file. |
| CVE-2010-4689 | Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.3(2) do not properly preserve ACL behavior after a migration, which allows remote attackers to bypass intended access restrictions via an unspecified type of network traffic that had previously been denied, aka Bug ID CSCte46460. |
| CVE-2010-4344 | Heap-based buffer overflow in the string_vformat function in string.c in Exim before 4.70 allows remote attackers to execute arbitrary code via an SMTP session that includes two MAIL commands in conjunction with a large message containing crafted headers, leading to improper rejection logging. |
| CVE-2010-4120 | Multiple cross-site scripting (XSS) vulnerabilities in the TAM console in IBM Tivoli Access Manager for e-business 6.1.0 before 6.1.0-TIV-TAM-FP0006 allow remote attackers to inject arbitrary web script or HTML via (1) the parm1 parameter to ivt/ivtserver, or the method parameter to (2) acl, (3) domain, (4) group, (5) gso, (6) gsogroup, (7) os, (8) pop, (9) rule, (10) user, or (11) webseal in ibm/wpm/. |
| CVE-2010-3779 | Dovecot 1.2.x before 1.2.15 and 2.0.x before 2.0.beta2 grants the admin permission to the owner of each mailbox in a non-public namespace, which might allow remote authenticated users to bypass intended access restrictions by changing the ACL of a mailbox, as demonstrated by a symlinked shared mailbox. |
| CVE-2010-3707 | plugins/acl/acl-backend-vfile.c in Dovecot 1.2.x before 1.2.15 and 2.0.x before 2.0.5 interprets an ACL entry as a directive to add to the permissions granted by another ACL entry, instead of a directive to replace the permissions granted by another ACL entry, in certain circumstances involving more specific entries that occur after less specific entries, which allows remote authenticated users to bypass intended access restrictions via a request to read or modify a mailbox. |
| CVE-2010-3706 | plugins/acl/acl-backend-vfile.c in Dovecot 1.2.x before 1.2.15 and 2.0.x before 2.0.5 interprets an ACL entry as a directive to add to the permissions granted by another ACL entry, instead of a directive to replace the permissions granted by another ACL entry, in certain circumstances involving the private namespace of a user, which allows remote authenticated users to bypass intended access restrictions via a request to read or modify a mailbox. |
| CVE-2010-3304 | The ACL plugin in Dovecot 1.2.x before 1.2.13 propagates INBOX ACLs to newly created mailboxes in certain configurations, which might allow remote attackers to read mailboxes that have unintended weak ACLs. |
| CVE-2010-3223 | The user interface in Microsoft Cluster Service (MSCS) in Microsoft Windows Server 2008 R2 does not properly set administrative-share permissions for new cluster disks that are shared as part of a failover cluster, which allows remote attackers to read or modify data on these disks via requests to the associated share, aka "Permissions on New Cluster Disks Vulnerability." |
| CVE-2010-2554 | The Tracing Feature for Services in Microsoft Windows Vista SP1 and SP2, Windows Server 2008 Gold, SP2, and R2, and Windows 7 has incorrect ACLs on its registry keys, which allows local users to gain privileges via vectors involving a named pipe and impersonation, aka "Tracing Registry Key ACL Vulnerability." |
| CVE-2010-2199 | lib/fsm.c in RPM 4.8.0 and earlier does not properly reset the metadata of an executable file during replacement of the file in an RPM package upgrade or deletion of the file in an RPM package removal, which might allow local users to bypass intended access restrictions by creating a hard link to a vulnerable file that has a POSIX ACL, a related issue to CVE-2010-2059. |
| CVE-2010-2071 | The btrfs_xattr_set_acl function in fs/btrfs/acl.c in btrfs in the Linux kernel 2.6.34 and earlier does not check file ownership before setting an ACL, which allows local users to bypass file permissions by setting arbitrary ACLs, as demonstrated using setfacl. |
| CVE-2010-1326 | perms.cpp in March Hare Software CVSNT 2.0.58, 2.5.01, 2.5.02, 2.5.03 before build 3736, 2.5.04 before build 2862; CVS Suite 2.5.03, 2008 before build 3736, and 2009 before 3729 allows remote attackers to bypass the permissions check, modify arbitrary modules and directories within CVSROOT, and execute arbitrary code via a crafted branch name ACL, possibly related to incorrect inheritance. |
| CVE-2010-1224 | main/acl.c in Asterisk Open Source 1.6.0.x before 1.6.0.25, 1.6.1.x before 1.6.1.17, and 1.6.2.x before 1.6.2.5 does not properly enforce remote host access controls when CIDR notation "/0" is used in permit= and deny= configuration rules, which causes an improper arithmetic shift and might allow remote attackers to bypass ACL rules and access services from unauthorized hosts. |
| CVE-2010-1191 | Sahana disaster management system 0.6.2.2, and possibly other versions, allows remote attackers to bypass intended access restrictions and disable administrator authentication via a direct request to stream.php in an acl_enable_acl action to the admin module. |
| CVE-2010-0289 | Multiple cross-site request forgery (CSRF) vulnerabilities in the ACL Manager plugin (plugins/acl/ajax.php) in DokuWiki before 2009-12-25c allow remote attackers to hijack the authentication of administrators for requests that modify access control rules, and other unspecified requests, via unknown vectors. |
| CVE-2010-0288 | A typo in the administrator permission check in the ACL Manager plugin (plugins/acl/ajax.php) in DokuWiki before 2009-12-25b allows remote attackers to gain privileges and access closed wikis by editing current ACL statements, as demonstrated in the wild in January 2010. |
| CVE-2010-0287 | Directory traversal vulnerability in the ACL Manager plugin (plugins/acl/ajax.php) in DokuWiki before 2009-12-25b allows remote attackers to list the contents of arbitrary directories via a .. (dot dot) in the ns parameter. |
| CVE-2010-0218 | ISC BIND 9.7.2 through 9.7.2-P1 uses an incorrect ACL to restrict the ability of Recursion Desired (RD) queries to access the cache, which allows remote attackers to obtain potentially sensitive information via a DNS query. |
| CVE-2009-4762 | MoinMoin 1.7.x before 1.7.3 and 1.8.x before 1.8.3 checks parent ACLs in certain inappropriate circumstances during processing of hierarchical ACLs, which allows remote attackers to bypass intended access restrictions by requesting an item, a different vulnerability than CVE-2008-6603. |
| CVE-2009-4411 | The (1) setfacl and (2) getfacl commands in XFS acl 2.2.47, when running in recursive (-R) mode, follow symbolic links even when the --physical (aka -P) or -L option is specified, which might allow local users to modify the ACL for arbitrary files or directories via a symlink attack. |
| CVE-2009-1888 | The acl_group_override function in smbd/posix_acls.c in smbd in Samba 3.0.x before 3.0.35, 3.1.x and 3.2.x before 3.2.13, and 3.3.x before 3.3.6, when dos filemode is enabled, allows remote attackers to modify access control lists for files via vectors related to read access to uninitialized memory. |
| CVE-2009-1160 | Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 7.0 before 7.0(8)1, 7.1 before 7.1(2)74, 7.2 before 7.2(4)9, and 8.0 before 8.0(4)5 do not properly implement the implicit deny statement, which might allow remote attackers to successfully send packets that bypass intended access restrictions, aka Bug ID CSCsq91277. |
| CVE-2009-0080 | The ThreadPool class in Windows Vista Gold and SP1, and Server 2008, does not properly implement isolation among a set of distinct processes that (1) all run under the NetworkService account or (2) all run under the LocalService account, which allows local users to gain privileges by leveraging incorrect thread ACLs to access the resources of one of the processes, aka "Windows Thread Pool ACL Weakness Vulnerability." |
| CVE-2008-6603 | MoinMoin 1.6.2 and 1.7 does not properly enforce ACL checks when acl_hierarchic is set to True, which might allow remote attackers to bypass intended access restrictions, a different vulnerability than CVE-2008-1937. |
| CVE-2008-6548 | The rst parser (parser/text_rst.py) in MoinMoin 1.6.1 does not check the ACL of an included page, which allows attackers to read unauthorized include files via unknown vectors. |
| CVE-2008-5617 | The ACL handling in rsyslog 3.12.1 to 3.20.0, 4.1.0, and 4.1.1 does not follow $AllowedSender directive, which allows remote attackers to bypass intended access restrictions and spoof log messages or create a large number of spurious messages. |
| CVE-2008-4683 | The dissect_btacl function in packet-bthci_acl.c in the Bluetooth ACL dissector in Wireshark 0.99.2 through 1.0.3 allows remote attackers to cause a denial of service (application crash or abort) via a packet with an invalid length, related to an erroneous tvb_memcpy call. |
| CVE-2008-4578 | The ACL plugin in Dovecot before 1.1.4 allows attackers to bypass intended access restrictions by using the "k" right to create unauthorized "parent/child/child" mailboxes. |
| CVE-2008-4577 | The ACL plugin in Dovecot before 1.1.4 treats negative access rights as if they are positive access rights, which allows attackers to bypass intended access restrictions. |
| CVE-2008-4160 | Unspecified vulnerability in the UFS module in Sun Solaris 8 through 10 and OpenSolaris allows local users to cause a denial of service (NULL pointer dereference and kernel panic) via unknown vectors related to the Solaris Access Control List (ACL) implementation. |
| CVE-2008-3915 | Buffer overflow in nfsd in the Linux kernel before 2.6.26.4, when NFSv4 is enabled, allows remote attackers to have an unknown impact via vectors related to decoding an NFSv4 acl. |
| CVE-2008-3274 | The default configuration of Red Hat Enterprise IPA 1.0.0 and FreeIPA before 1.1.1 places ldap:///anyone on the read ACL for the krbMKey attribute, which allows remote attackers to obtain the Kerberos master key via an anonymous LDAP query. |
| CVE-2007-5692 | Multiple cross-site scripting (XSS) vulnerabilities in SiteBar 3.3.8 allow remote attackers to inject arbitrary web script or HTML via (1) the lang parameter to integrator.php; (2) the token parameter in a New Password action, (3) the nid_acl parameter in a Folder Properties action, or (4) the uid parameter in a Modify User action to command.php; or (5) the target parameter to index.php, different vectors than CVE-2006-3320. |
| CVE-2007-4849 | JFFS2, as used on One Laptop Per Child (OLPC) build 542 and possibly other Linux systems, when POSIX ACL support is enabled, does not properly store permissions during (1) inode creation or (2) ACL setting, which might allow local users to access restricted files or directories after a remount of a filesystem, related to "legacy modes" and an inconsistency between dentry permissions and inode permissions. |
| CVE-2007-4211 | The ACL plugin in Dovecot before 1.0.3 allows remote authenticated users with the insert right to save certain flags via a (1) COPY or (2) APPEND command. |
| CVE-2007-2925 | The default access control lists (ACL) in ISC BIND 9.4.0, 9.4.1, and 9.5.0a1 through 9.5.0a5 do not set the allow-recursion and allow-query-cache ACLs, which allows remote attackers to make recursive queries and query the cache. |
| CVE-2007-2882 | Unspecified vulnerability in the NFS client module in Sun Solaris 8 through 10 before 20070524, when operating as an NFS server, allows remote attackers to cause a denial of service (crash) via certain Access Control List (acl) packets. |
| CVE-2007-2815 | The "hit-highlighting" functionality in webhits.dll in Microsoft Internet Information Services (IIS) Web Server 5.0 only uses Windows NT ACL configuration, which allows remote attackers to bypass NTLM and basic authentication mechanisms and access private web directories via the CiWebhitsfile parameter to null.htw. |
| CVE-2007-2529 | Integer signedness error in the acl (facl) system call in Solaris 10 before 20070507 allows local users to cause a denial of service (kernel panic) and possibly gain privileges via a certain argument, related to ACE_SETACL. |
| CVE-2007-2446 | Multiple heap-based buffer overflows in the NDR parsing in smbd in Samba 3.0.0 through 3.0.25rc3 allow remote attackers to execute arbitrary code via crafted MS-RPC requests involving (1) DFSEnum (netdfs_io_dfs_EnumInfo_d), (2) RFNPCNEX (smb_io_notify_option_type_data), (3) LsarAddPrivilegesToAccount (lsa_io_privilege_set), (4) NetSetFileSecurity (sec_io_acl), or (5) LsarLookupSids/LsarLookupSids2 (lsa_io_trans_names). |
| CVE-2007-2041 | Cisco Wireless LAN Controller (WLC) before 4.0.206.0 saves the WLAN ACL configuration with an invalid checksum, which prevents WLAN ACLs from being loaded at boot time, and might allow remote attackers to bypass intended access restrictions, aka Bug ID CSCse58195. |
| CVE-2007-0968 | Unspecified vulnerability in Cisco Firewall Services Module (FWSM) before 2.3(4.7) and 3.x before 3.1(3.1) causes the access control entries (ACE) in an ACL to be improperly evaluated, which allows remote authenticated users to bypass intended certain ACL protections. |
| CVE-2007-0731 | Stack-based buffer overflow in the Apple-specific Samba module (SMB File Server) in Apple Mac OS X 10.4 through 10.4.8 allows context-dependent attackers to execute arbitrary code via a long ACL. |
| CVE-2007-0454 | Format string vulnerability in the afsacl.so VFS module in Samba 3.0.6 through 3.0.23d allows context-dependent attackers to execute arbitrary code via format string specifiers in a filename on an AFS file system, which is not properly handled during Windows ACL mapping. |
| CVE-2007-0248 | The aclMatchExternal function in Squid before 2.6.STABLE7 allows remote attackers to cause a denial of service (crash) by causing an external_acl queue overload, which triggers an infinite loop. |
| CVE-2006-7241 | The Image Viewer component in IBM FileNet P8 Application Engine (P8AE) 3.5.1 before 3.5.1-002 removes a user from an ACL when the user is denied all permissions for an annotation, which might allow remote authenticated users to bypass intended access restrictions in opportunistic circumstances. |
| CVE-2006-6679 | Pedro Lineu Orso chetcpasswd before 2.4 relies on the X-Forwarded-For HTTP header when verifying a client's status on an IP address ACL, which allows remote attackers to gain unauthorized access by spoofing this header. |
| CVE-2006-5741 | Multiple cross-site scripting (XSS) vulnerabilities in AirMagnet Enterprise before 7.5 build 6307 allow remote attackers to inject arbitrary web script or HTML via (1) the 404 error page of the Smart Sensor Edge Sensor; (2) the user name for a failed logon, when displayed in the audit journals reviewing interface (/AirMagnetSensor/AMSensor.dll/XH) by the Smart Sensor Edge Sensor log viewer; and (3) an SSID of an AP, when displayed on an ACL page (/Amom/Amom.dll/BD) of the Enterprise Server Status Overview in the Enterprise Server Web interface. |
| CVE-2006-5704 | HP NonStop Server G06.29, when running Standard Security T6533G06 before T6533G06^ABK, does not properly evaluate access permissions to OSS directories when no optional ACL entry exists, which allows local users to read arbitrary files. |
| CVE-2006-4600 | slapd in OpenLDAP before 2.3.25 allows remote authenticated users with selfwrite Access Control List (ACL) privileges to modify arbitrary Distinguished Names (DN). |
| CVE-2006-4476 | Multiple unspecified vulnerabilities in Joomla! before 1.0.11, related to "Injection Flaws," allow attackers to have an unknown impact via (1) globals.php, which uses include_once() instead of require(); (2) the $options variable; (3) Admin Upload Image; (4) ->load(); (5) content submissions when frontpage is selected; (6) the mosPageNav constructor; (7) saveOrder functions; (8) the absence of "exploit blocking rules" in htaccess; and (9) the ACL. |
| CVE-2006-4184 | SmartLine DeviceLock before 5.73 Build 305 does not properly enforce access control lists (ACL) in raw mode, which allows local users to bypass NTFS controls and obtain sensitive information. |
| CVE-2006-3779 | Citrix MetaFrame up to XP 1.0 Feature 1, except when running on Windows Server 2003, installs a registry key with an insecure ACL, which allows remote authenticated users to gain privileges. |
| CVE-2005-4499 | The Downloadable RADIUS ACLs feature in Cisco PIX and VPN 3000 concentrators, when creating an ACL on the Cisco Secure Access Control Server (CS ACS), generates a random internal name for an ACL that is also used as a hidden user name and password, which allows remote attackers to gain privileges by sniffing the username from the cleartext portion of a RADIUS session, then using the password to log in to another device that uses CS ACS. |
| CVE-2005-3623 | nfs2acl.c in the Linux kernel 2.6.14.4 does not check for MAY_SATTR privilege before setting access controls (ACL) on files on exported NFS filesystems, which allows remote attackers to bypass ACLs for readonly mounted NFS filesystems. |
| CVE-2005-2801 | xattr.c in the ext2 and ext3 file system code for Linux kernel 2.6 does not properly compare the name_index fields when sharing xattr blocks, which could prevent default ACLs from being applied. |
| CVE-2005-1720 | AFP Server for Mac OS X 10.4.1, when using an ACL enabled volume, does not properly remove an ACL when a file is copied to a directory that does not use ACLs, which will override the POSIX file permissions for that ACL. |
| CVE-2005-1517 | Unknown vulnerability in Cisco Firewall Services Module (FWSM) 2.3.1 and earlier, when using URL, FTP, or HTTPS filtering exceptions, allows certain TCP packets to bypass access control lists (ACLs). |
| CVE-2004-2577 | The acl_check function in phpGroupWare 0.9.16RC2 always returns True, even when mkdir does not behave as expected, which could allow remote attackers to obtain sensitive information via WebDAV from users' home directories that lack .htaccess files, and possibly has other unknown impacts. |
| CVE-2004-2559 | DokuWiki before 2004-10-19 allows remote attackers to access administrative functionality including (1) Mediaselectiondialog, (2) Recent changes, (3) feed, and (4) search, possibly due to the lack of ACL checks. |
| CVE-2004-1463 | Unknown vulnerability in the PageEditor in MoinMoin 1.2.2 and earlier, related to Access Control Lists (ACL), has unknown impact. |
| CVE-2004-1370 | Multiple SQL injection vulnerabilities in PL/SQL procedures that run with definer rights in Oracle 9i and 10g allow remote attackers to execute arbitrary SQL commands and gain privileges via (1) DBMS_EXPORT_EXTENSION, (2) WK_ACL.GET_ACL, (3) WK_ACL.STORE_ACL, (4) WK_ADM.COMPLETE_ACL_SNAPSHOT, (5) WK_ACL.DELETE_ACLS_WITH_STATEMENT, or (6) DRILOAD.VALIDATE_STMT. |
| CVE-2004-0432 | ProFTPD 1.2.9 treats the Allow and Deny directives for CIDR based ACL entries as if they were AllowAll, which could allow FTP clients to bypass intended access restrictions. |
| CVE-2003-0488 | Multiple cross-site scripting (XSS) vulnerabilities in Kerio MailServer 5.6.3 allow remote attackers to insert arbitrary web script via (1) the add_name parameter in the add_acl module, or (2) the alias parameter in the do_map module. |
| CVE-2003-0487 | Multiple buffer overflows in Kerio MailServer 5.6.3 allow remote authenticated users to cause a denial of service and possibly execute arbitrary code via (1) a long showuser parameter in the do_subscribe module, (2) a long folder parameter in the add_acl module, (3) a long folder parameter in the list module, and (4) a long user parameter in the do_map module. |
| CVE-2002-2324 | The "System Restore" directory and subdirectories, and possibly other subdirectories in the "System Volume Information" directory on Windows XP Professional, have insecure access control list (ACL) permissions, which allows local users to access restricted files and modify registry settings. |
| CVE-2002-2323 | Sun PC NetLink 1.0 through 1.2 does not properly set the access control list (ACL) for files and directories that use symbolic links and have been restored from backup, which could allow local or remote attackers to bypass intended access restrictions. |
| CVE-2001-1555 | pt_chmod in Solaris 8 does not call fdetach to reset terminal privileges when users log out of terminals, which allows local users to write to other users' terminals by modifying the ACL of a TTY. |
| CVE-2001-1510 | Allaire JRun 2.3.3, 3.0 and 3.1 running on IIS 4.0 and 5.0, iPlanet, Apache, JRun web server (JWS), and possibly other web servers allows remote attackers to read arbitrary files and directories by appending (1) "%3f.jsp", (2) "?.jsp" or (3) "?" to the requested URL. |
| CVE-2001-1477 | The Domain gateway in BEA Tuxedo 7.1 does not perform authorization checks for imported services and qspaces on remote domains, even when an ACL exists, which allows users to access services in a remote domain. |
| CVE-2001-1155 | TCP Wrappers (tcp_wrappers) in FreeBSD 4.1.1 through 4.3 with the PARANOID ACL option enabled does not properly check the result of a reverse DNS lookup, which could allow remote attackers to bypass intended access restrictions via DNS spoofing. |
| CVE-2001-1030 | Squid before 2.3STABLE5 in HTTP accelerator mode does not enable access control lists (ACLs) when the httpd_accel_host and http_accel_with_proxy off settings are used, which allows attackers to bypass the ACLs and conduct unauthorized activities such as port scanning. |
| CVE-2001-0867 | Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not properly filter does not properly filter packet fragments even when the "fragment" keyword is used in an ACL, which allows remote attackers to bypass the intended access controls. |
| CVE-2001-0866 | Cisco 12000 with IOS 12.0 and lines card based on Engine 2 does not properly handle an outbound ACL when an input ACL is not configured on all the interfaces of a multi port line card, which could allow remote attackers to bypass the intended access controls. |
| CVE-2001-0865 | Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not support the "fragment" keyword in an outgoing ACL, which could allow fragmented packets in violation of the intended access. |
| CVE-2001-0864 | Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not properly handle the implicit "deny ip any any" rule in an outgoing ACL when the ACL contains exactly 448 entries, which can allow some outgoing packets to bypass access restrictions. |
| CVE-2001-0863 | Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not handle the "fragment" keyword in a compiled ACL (Turbo ACL) for packets that are sent to the router, which allows remote attackers to cause a denial of service via a flood of fragments. |
| CVE-2001-0862 | Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not block non-initial packet fragments, which allows remote attackers to bypass the ACL. |
| CVE-2000-1174 | Multiple buffer overflows in AFS ACL parser for Ethereal 0.8.13 and earlier allows remote attackers to execute arbitrary commands via a packet with a long username. |
| CVE-1999-1235 | Internet Explorer 5.0 records the username and password for FTP servers in the URL history, which could allow (1) local users to read the information from another user's index.dat, or (2) people who are physically observing ("shoulder surfing") another user to read the information from the status bar when the user moves the mouse over a link. |
| CVE-1999-0993 | Modifications to ACLs (Access Control Lists) in Microsoft Exchange 5.5 do not take effect until the directory store cache is refreshed. |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
