|
|
Search Results
There are 635 CVE Records that match your search.
| Name | Description |
|---|---|
| CVE-2024-53088 | In the Linux kernel, the following vulnerability has been resolved: i40e: fix race condition by adding filter's intermediate sync state Fix a race condition in the i40e driver that leads to MAC/VLAN filters becoming corrupted and leaking. Address the issue that occurs under heavy load when multiple threads are concurrently modifying MAC/VLAN filters by setting mac and port VLAN. 1. Thread T0 allocates a filter in i40e_add_filter() within i40e_ndo_set_vf_port_vlan(). 2. Thread T1 concurrently frees the filter in __i40e_del_filter() within i40e_ndo_set_vf_mac(). 3. Subsequently, i40e_service_task() calls i40e_sync_vsi_filters(), which refers to the already freed filter memory, causing corruption. Reproduction steps: 1. Spawn multiple VFs. 2. Apply a concurrent heavy load by running parallel operations to change MAC addresses on the VFs and change port VLANs on the host. 3. Observe errors in dmesg: "Error I40E_AQ_RC_ENOSPC adding RX filters on VF XX, please set promiscuous on manually for VF XX". Exact code for stable reproduction Intel can't open-source now. The fix involves implementing a new intermediate filter state, I40E_FILTER_NEW_SYNC, for the time when a filter is on a tmp_add_list. These filters cannot be deleted from the hash list directly but must be removed using the full process. |
| CVE-2024-50177 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix a UBSAN warning in DML2.1 When programming phantom pipe, since cursor_width is explicity set to 0, this causes calculation logic to trigger overflow for an unsigned int triggering the kernel's UBSAN check as below: [ 40.962845] UBSAN: shift-out-of-bounds in /tmp/amd.EfpumTkO/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3312:34 [ 40.962849] shift exponent 4294967170 is too large for 32-bit type 'unsigned int' [ 40.962852] CPU: 1 PID: 1670 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 40.962854] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F21 01/10/2024 [ 40.962856] Call Trace: [ 40.962857] <TASK> [ 40.962860] dump_stack_lvl+0x48/0x70 [ 40.962870] dump_stack+0x10/0x20 [ 40.962872] __ubsan_handle_shift_out_of_bounds+0x1ac/0x360 [ 40.962878] calculate_cursor_req_attributes.cold+0x1b/0x28 [amdgpu] [ 40.963099] dml_core_mode_support+0x6b91/0x16bc0 [amdgpu] [ 40.963327] ? srso_alias_return_thunk+0x5/0x7f [ 40.963331] ? CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport+0x18b8/0x2790 [amdgpu] [ 40.963534] ? srso_alias_return_thunk+0x5/0x7f [ 40.963536] ? dml_core_mode_support+0xb3db/0x16bc0 [amdgpu] [ 40.963730] dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.963906] ? srso_alias_return_thunk+0x5/0x7f [ 40.963909] ? dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.964078] core_dcn4_mode_support+0x72/0xbf0 [amdgpu] [ 40.964247] dml2_top_optimization_perform_optimization_phase+0x1d3/0x2a0 [amdgpu] [ 40.964420] dml2_build_mode_programming+0x23d/0x750 [amdgpu] [ 40.964587] dml21_validate+0x274/0x770 [amdgpu] [ 40.964761] ? srso_alias_return_thunk+0x5/0x7f [ 40.964763] ? resource_append_dpp_pipes_for_plane_composition+0x27c/0x3b0 [amdgpu] [ 40.964942] dml2_validate+0x504/0x750 [amdgpu] [ 40.965117] ? dml21_copy+0x95/0xb0 [amdgpu] [ 40.965291] ? srso_alias_return_thunk+0x5/0x7f [ 40.965295] dcn401_validate_bandwidth+0x4e/0x70 [amdgpu] [ 40.965491] update_planes_and_stream_state+0x38d/0x5c0 [amdgpu] [ 40.965672] update_planes_and_stream_v3+0x52/0x1e0 [amdgpu] [ 40.965845] ? srso_alias_return_thunk+0x5/0x7f [ 40.965849] dc_update_planes_and_stream+0x71/0xb0 [amdgpu] Fix this by adding a guard for checking cursor width before triggering the size calculation. |
| CVE-2024-50067 | In the Linux kernel, the following vulnerability has been resolved: uprobe: avoid out-of-bounds memory access of fetching args Uprobe needs to fetch args into a percpu buffer, and then copy to ring buffer to avoid non-atomic context problem. Sometimes user-space strings, arrays can be very large, but the size of percpu buffer is only page size. And store_trace_args() won't check whether these data exceeds a single page or not, caused out-of-bounds memory access. It could be reproduced by following steps: 1. build kernel with CONFIG_KASAN enabled 2. save follow program as test.c ``` \#include <stdio.h> \#include <stdlib.h> \#include <string.h> // If string length large than MAX_STRING_SIZE, the fetch_store_strlen() // will return 0, cause __get_data_size() return shorter size, and // store_trace_args() will not trigger out-of-bounds access. // So make string length less than 4096. \#define STRLEN 4093 void generate_string(char *str, int n) { int i; for (i = 0; i < n; ++i) { char c = i % 26 + 'a'; str[i] = c; } str[n-1] = '\0'; } void print_string(char *str) { printf("%s\n", str); } int main() { char tmp[STRLEN]; generate_string(tmp, STRLEN); print_string(tmp); return 0; } ``` 3. compile program `gcc -o test test.c` 4. get the offset of `print_string()` ``` objdump -t test | grep -w print_string 0000000000401199 g F .text 000000000000001b print_string ``` 5. configure uprobe with offset 0x1199 ``` off=0x1199 cd /sys/kernel/debug/tracing/ echo "p /root/test:${off} arg1=+0(%di):ustring arg2=\$comm arg3=+0(%di):ustring" > uprobe_events echo 1 > events/uprobes/enable echo 1 > tracing_on ``` 6. run `test`, and kasan will report error. ================================================================== BUG: KASAN: use-after-free in strncpy_from_user+0x1d6/0x1f0 Write of size 8 at addr ffff88812311c004 by task test/499CPU: 0 UID: 0 PID: 499 Comm: test Not tainted 6.12.0-rc3+ #18 Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x55/0x70 print_address_description.constprop.0+0x27/0x310 kasan_report+0x10f/0x120 ? strncpy_from_user+0x1d6/0x1f0 strncpy_from_user+0x1d6/0x1f0 ? rmqueue.constprop.0+0x70d/0x2ad0 process_fetch_insn+0xb26/0x1470 ? __pfx_process_fetch_insn+0x10/0x10 ? _raw_spin_lock+0x85/0xe0 ? __pfx__raw_spin_lock+0x10/0x10 ? __pte_offset_map+0x1f/0x2d0 ? unwind_next_frame+0xc5f/0x1f80 ? arch_stack_walk+0x68/0xf0 ? is_bpf_text_address+0x23/0x30 ? kernel_text_address.part.0+0xbb/0xd0 ? __kernel_text_address+0x66/0xb0 ? unwind_get_return_address+0x5e/0xa0 ? __pfx_stack_trace_consume_entry+0x10/0x10 ? arch_stack_walk+0xa2/0xf0 ? _raw_spin_lock_irqsave+0x8b/0xf0 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? depot_alloc_stack+0x4c/0x1f0 ? _raw_spin_unlock_irqrestore+0xe/0x30 ? stack_depot_save_flags+0x35d/0x4f0 ? kasan_save_stack+0x34/0x50 ? kasan_save_stack+0x24/0x50 ? mutex_lock+0x91/0xe0 ? __pfx_mutex_lock+0x10/0x10 prepare_uprobe_buffer.part.0+0x2cd/0x500 uprobe_dispatcher+0x2c3/0x6a0 ? __pfx_uprobe_dispatcher+0x10/0x10 ? __kasan_slab_alloc+0x4d/0x90 handler_chain+0xdd/0x3e0 handle_swbp+0x26e/0x3d0 ? __pfx_handle_swbp+0x10/0x10 ? uprobe_pre_sstep_notifier+0x151/0x1b0 irqentry_exit_to_user_mode+0xe2/0x1b0 asm_exc_int3+0x39/0x40 RIP: 0033:0x401199 Code: 01 c2 0f b6 45 fb 88 02 83 45 fc 01 8b 45 fc 3b 45 e4 7c b7 8b 45 e4 48 98 48 8d 50 ff 48 8b 45 e8 48 01 d0 ce RSP: 002b:00007ffdf00576a8 EFLAGS: 00000206 RAX: 00007ffdf00576b0 RBX: 0000000000000000 RCX: 0000000000000ff2 RDX: 0000000000000ffc RSI: 0000000000000ffd RDI: 00007ffdf00576b0 RBP: 00007ffdf00586b0 R08: 00007feb2f9c0d20 R09: 00007feb2f9c0d20 R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000401040 R13: 00007ffdf0058780 R14: 0000000000000000 R15: 0000000000000000 </TASK> This commit enforces the buffer's maxlen less than a page-size to avoid store_trace_args() out-of-memory access. |
| CVE-2024-49888 | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a sdiv overflow issue Zac Ecob reported a problem where a bpf program may cause kernel crash due to the following error: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI The failure is due to the below signed divide: LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808. LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808, but it is impossible since for 64-bit system, the maximum positive number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is LLONG_MIN. Further investigation found all the following sdiv/smod cases may trigger an exception when bpf program is running on x86_64 platform: - LLONG_MIN/-1 for 64bit operation - INT_MIN/-1 for 32bit operation - LLONG_MIN%-1 for 64bit operation - INT_MIN%-1 for 32bit operation where -1 can be an immediate or in a register. On arm64, there are no exceptions: - LLONG_MIN/-1 = LLONG_MIN - INT_MIN/-1 = INT_MIN - LLONG_MIN%-1 = 0 - INT_MIN%-1 = 0 where -1 can be an immediate or in a register. Insn patching is needed to handle the above cases and the patched codes produced results aligned with above arm64 result. The below are pseudo codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0 and the divisor is stored in a register. sdiv: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L2 if tmp == 0 goto L1 rY = 0 L1: rY = -rY; goto L3 L2: rY /= rX L3: smod: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L1 if tmp == 1 (is64 ? goto L2 : goto L3) rY = 0; goto L2 L1: rY %= rX L2: goto L4 // only when !is64 L3: wY = wY // only when !is64 L4: [1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/ |
| CVE-2024-49880 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix off by one issue in alloc_flex_gd() Wesley reported an issue: ================================================================== EXT4-fs (dm-5): resizing filesystem from 7168 to 786432 blocks ------------[ cut here ]------------ kernel BUG at fs/ext4/resize.c:324! CPU: 9 UID: 0 PID: 3576 Comm: resize2fs Not tainted 6.11.0+ #27 RIP: 0010:ext4_resize_fs+0x1212/0x12d0 Call Trace: __ext4_ioctl+0x4e0/0x1800 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0x99/0xd0 x64_sys_call+0x1206/0x20d0 do_syscall_64+0x72/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== While reviewing the patch, Honza found that when adjusting resize_bg in alloc_flex_gd(), it was possible for flex_gd->resize_bg to be bigger than flexbg_size. The reproduction of the problem requires the following: o_group = flexbg_size * 2 * n; o_size = (o_group + 1) * group_size; n_group: [o_group + flexbg_size, o_group + flexbg_size * 2) o_size = (n_group + 1) * group_size; Take n=0,flexbg_size=16 as an example: last:15 |o---------------|--------------n-| o_group:0 resize to n_group:30 The corresponding reproducer is: img=test.img rm -f $img truncate -s 600M $img mkfs.ext4 -F $img -b 1024 -G 16 8M dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 248M Delete the problematic plus 1 to fix the issue, and add a WARN_ON_ONCE() to prevent the issue from happening again. [ Note: another reproucer which this commit fixes is: img=test.img rm -f $img truncate -s 25MiB $img mkfs.ext4 -b 4096 -E nodiscard,lazy_itable_init=0,lazy_journal_init=0 $img truncate -s 3GiB $img dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 3G umount $dev losetup -d $dev -- TYT ] |
| CVE-2024-47884 | foxmarks is a CLI read-only interface for Firefox's bookmarks and history. A temporary file was created under the /tmp directory with read permissions for all users containing a copy of Firefox's database of bookmarks, history, input history, visits counter, use counter, view counter and more confidential information about the history of using Firefox. Permissions default to 0o600 for NamedTempFile. However, after copying the database, its permissions were copied with it resulting in an insecure file with 0x644 permissions. A malicious user is able to read the database when the targeted user executes foxmarks bookmarks or foxmarks history. This vulnerability is patched in v2.1.0. |
| CVE-2024-45276 | An unauthenticated remote attacker can get read access to files in the "/tmp" directory due to missing authentication. |
| CVE-2024-42317 | In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: avoid PMD-size page cache if needed xarray can't support arbitrary page cache size. the largest and supported page cache size is defined as MAX_PAGECACHE_ORDER by commit 099d90642a71 ("mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray"). However, it's possible to have 512MB page cache in the huge memory's collapsing path on ARM64 system whose base page size is 64KB. 512MB page cache is breaking the limitation and a warning is raised when the xarray entry is split as shown in the following example. [root@dhcp-10-26-1-207 ~]# cat /proc/1/smaps | grep KernelPageSize KernelPageSize: 64 kB [root@dhcp-10-26-1-207 ~]# cat /tmp/test.c : int main(int argc, char **argv) { const char *filename = TEST_XFS_FILENAME; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret = 0; if (pgsize != 0x10000) { fprintf(stdout, "System with 64KB base page size is required!\n"); return -EPERM; } system("echo 0 > /sys/devices/virtual/bdi/253:0/read_ahead_kb"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open the xfs file */ fd = open(filename, O_RDONLY); assert(fd > 0); /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ, MAP_SHARED, fd, 0); assert(buf != (void *)-1); fprintf(stdout, "mapped buffer at 0x%p\n", buf); /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_NOHUGEPAGE); assert(ret == 0); ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_READ); assert(ret == 0); /* Collapse VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); assert(ret == 0); ret = madvise(buf, TEST_MEM_SIZE, MADV_COLLAPSE); if (ret) { fprintf(stdout, "Error %d to madvise(MADV_COLLAPSE)\n", errno); goto out; } /* Split xarray entry. Write permission is needed */ munmap(buf, TEST_MEM_SIZE); buf = (void *)-1; close(fd); fd = open(filename, O_RDWR); assert(fd > 0); fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); out: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return ret; } [root@dhcp-10-26-1-207 ~]# gcc /tmp/test.c -o /tmp/test [root@dhcp-10-26-1-207 ~]# /tmp/test ------------[ cut here ]------------ WARNING: CPU: 25 PID: 7560 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse \ xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 virtio_net \ sha1_ce net_failover virtio_blk virtio_console failover dimlib virtio_mmio CPU: 25 PID: 7560 Comm: test Kdump: loaded Not tainted 6.10.0-rc7-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x780 sp : ffff8000ac32f660 x29: ffff8000ac32f660 x28: ffff0000e0969eb0 x27: ffff8000ac32f6c0 x26: 0000000000000c40 x25: ffff0000e0969eb0 x24: 000000000000000d x23: ffff8000ac32f6c0 x22: ffffffdfc0700000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0700000 x18: 0000000000000000 x17: 0000000000000000 x16: ffffd5f3708ffc70 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: ffffffffffffffc0 x10: 0000000000000040 x9 : ffffd5f3708e692c x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff0000e0969eb8 x5 : ffffd5f37289e378 x4 : 0000000000000000 x3 : 0000000000000c40 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x780 truncate_inode_partial_folio+0xdc/0x160 truncate_inode_pages_range+0x1b4/0x4a8 truncate_pagecache_range+0x84/0xa ---truncated--- |
| CVE-2024-42243 | In the Linux kernel, the following vulnerability has been resolved: mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray Patch series "mm/filemap: Limit page cache size to that supported by xarray", v2. Currently, xarray can't support arbitrary page cache size. More details can be found from the WARN_ON() statement in xas_split_alloc(). In our test whose code is attached below, we hit the WARN_ON() on ARM64 system where the base page size is 64KB and huge page size is 512MB. The issue was reported long time ago and some discussions on it can be found here [1]. [1] https://www.spinics.net/lists/linux-xfs/msg75404.html In order to fix the issue, we need to adjust MAX_PAGECACHE_ORDER to one supported by xarray and avoid PMD-sized page cache if needed. The code changes are suggested by David Hildenbrand. PATCH[1] adjusts MAX_PAGECACHE_ORDER to that supported by xarray PATCH[2-3] avoids PMD-sized page cache in the synchronous readahead path PATCH[4] avoids PMD-sized page cache for shmem files if needed Test program ============ # cat test.c #define _GNU_SOURCE #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <fcntl.h> #include <errno.h> #include <sys/syscall.h> #include <sys/mman.h> #define TEST_XFS_FILENAME "/tmp/data" #define TEST_SHMEM_FILENAME "/dev/shm/data" #define TEST_MEM_SIZE 0x20000000 int main(int argc, char **argv) { const char *filename; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret; if (pgsize != 0x10000) { fprintf(stderr, "64KB base page size is required\n"); return -EPERM; } system("echo force > /sys/kernel/mm/transparent_hugepage/shmem_enabled"); system("rm -fr /tmp/data"); system("rm -fr /dev/shm/data"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open xfs or shmem file */ filename = TEST_XFS_FILENAME; if (argc > 1 && !strcmp(argv[1], "shmem")) filename = TEST_SHMEM_FILENAME; fd = open(filename, O_CREAT | O_RDWR | O_TRUNC); if (fd < 0) { fprintf(stderr, "Unable to open <%s>\n", filename); return -EIO; } /* Extend file size */ ret = ftruncate(fd, TEST_MEM_SIZE); if (ret) { fprintf(stderr, "Error %d to ftruncate()\n", ret); goto cleanup; } /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (buf == (void *)-1) { fprintf(stderr, "Unable to mmap <%s>\n", filename); goto cleanup; } fprintf(stdout, "mapped buffer at 0x%p\n", buf); ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); if (ret) { fprintf(stderr, "Unable to madvise(MADV_HUGEPAGE)\n"); goto cleanup; } /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_WRITE); if (ret) { fprintf(stderr, "Error %d to madvise(MADV_POPULATE_WRITE)\n", ret); goto cleanup; } /* Punch the file to enforce xarray split */ ret = fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); if (ret) fprintf(stderr, "Error %d to fallocate()\n", ret); cleanup: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return 0; } # gcc test.c -o test # cat /proc/1/smaps | grep KernelPageSize | head -n 1 KernelPageSize: 64 kB # ./test shmem : ------------[ cut here ]------------ WARNING: CPU: 17 PID: 5253 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set nf_tables rfkill nfnetlink vfat fat virtio_balloon \ drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ virtio_net sha1_ce net_failover failover virtio_console virtio_blk \ dimlib virtio_mmio CPU: 17 PID: 5253 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TC ---truncated--- |
| CVE-2024-40955 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists() We can trigger a slab-out-of-bounds with the following commands: mkfs.ext4 -F /dev/$disk 10G mount /dev/$disk /tmp/test echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc echo test > /tmp/test/file && sync ================================================================== BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11 CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521 Call Trace: dump_stack_lvl+0x2c/0x50 kasan_report+0xb6/0xf0 ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] ext4_mb_regular_allocator+0x19e9/0x2370 [ext4] ext4_mb_new_blocks+0x88a/0x1370 [ext4] ext4_ext_map_blocks+0x14f7/0x2390 [ext4] ext4_map_blocks+0x569/0xea0 [ext4] ext4_do_writepages+0x10f6/0x1bc0 [ext4] [...] ================================================================== The flow of issue triggering is as follows: // Set s_mb_group_prealloc to 2147483647 via sysfs ext4_mb_new_blocks ext4_mb_normalize_request ext4_mb_normalize_group_request ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc ext4_mb_regular_allocator ext4_mb_choose_next_group ext4_mb_choose_next_group_best_avail mb_avg_fragment_size_order order = fls(len) - 2 = 29 ext4_mb_find_good_group_avg_frag_lists frag_list = &sbi->s_mb_avg_fragment_size[order] if (list_empty(frag_list)) // Trigger SOOB! At 4k block size, the length of the s_mb_avg_fragment_size list is 14, but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds to be triggered by an attempt to access an element at index 29. Add a new attr_id attr_clusters_in_group with values in the range [0, sbi->s_clusters_per_group] and declare mb_group_prealloc as that type to fix the issue. In addition avoid returning an order from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb) and reduce some useless loops. |
| CVE-2024-36041 | KSmserver in KDE Plasma Workspace (aka plasma-workspace) before 5.27.11.1 and 6.x before 6.0.5.1 allows connections via ICE based purely on the host, i.e., all local connections are accepted. This allows another user on the same machine to gain access to the session manager, e.g., use the session-restore feature to execute arbitrary code as the victim (on the next boot) via earlier use of the /tmp directory. |
| CVE-2024-35981 | In the Linux kernel, the following vulnerability has been resolved: virtio_net: Do not send RSS key if it is not supported There is a bug when setting the RSS options in virtio_net that can break the whole machine, getting the kernel into an infinite loop. Running the following command in any QEMU virtual machine with virtionet will reproduce this problem: # ethtool -X eth0 hfunc toeplitz This is how the problem happens: 1) ethtool_set_rxfh() calls virtnet_set_rxfh() 2) virtnet_set_rxfh() calls virtnet_commit_rss_command() 3) virtnet_commit_rss_command() populates 4 entries for the rss scatter-gather 4) Since the command above does not have a key, then the last scatter-gatter entry will be zeroed, since rss_key_size == 0. sg_buf_size = vi->rss_key_size; 5) This buffer is passed to qemu, but qemu is not happy with a buffer with zero length, and do the following in virtqueue_map_desc() (QEMU function): if (!sz) { virtio_error(vdev, "virtio: zero sized buffers are not allowed"); 6) virtio_error() (also QEMU function) set the device as broken vdev->broken = true; 7) Qemu bails out, and do not repond this crazy kernel. 8) The kernel is waiting for the response to come back (function virtnet_send_command()) 9) The kernel is waiting doing the following : while (!virtqueue_get_buf(vi->cvq, &tmp) && !virtqueue_is_broken(vi->cvq)) cpu_relax(); 10) None of the following functions above is true, thus, the kernel loops here forever. Keeping in mind that virtqueue_is_broken() does not look at the qemu `vdev->broken`, so, it never realizes that the vitio is broken at QEMU side. Fix it by not sending RSS commands if the feature is not available in the device. |
| CVE-2024-35962 | In the Linux kernel, the following vulnerability has been resolved: netfilter: complete validation of user input In my recent commit, I missed that do_replace() handlers use copy_from_sockptr() (which I fixed), followed by unsafe copy_from_sockptr_offset() calls. In all functions, we can perform the @optlen validation before even calling xt_alloc_table_info() with the following check: if ((u64)optlen < (u64)tmp.size + sizeof(tmp)) return -EINVAL; |
| CVE-2024-34490 | In Maxima through 5.47.0 before 51704c, the plotting facilities make use of predictable names under /tmp. Thus, the contents may be controlled by a local attacker who can create files in advance with these names. This affects, for example, plot2d. |
| CVE-2024-33858 | An issue was discovered in Logpoint before 7.4.0. A path injection vulnerability is seen while adding a CSV enrichment source. The source_name parameter could be changed to an absolute path; this will write the CSV file to that path inside the /tmp directory. |
| CVE-2024-31492 | An external control of file name or path vulnerability [CWE-73] in FortiClientMac version 7.2.3 and below, version 7.0.10 and below installer may allow a local attacker to execute arbitrary code or commands via writing a malicious configuration file in /tmp before starting the installation process. |
| CVE-2024-29905 | DIRAC is an interware, meaning a software framework for distributed computing. Prior to version 8.0.41, during the proxy generation process (e.g., when using `dirac-proxy-init`), it is possible for unauthorized users on the same machine to gain read access to the proxy. This allows the user to then perform any action that is possible with the original proxy. This vulnerability only exists for a short period of time (sub-millsecond) during the generation process. Version 8.0.41 contains a patch for the issue. As a workaround, setting the `X509_USER_PROXY` environment variable to a path that is inside a directory that is only readable to the current user avoids the potential risk. After the file has been written, it can be safely copied to the standard location (`/tmp/x509up_uNNNN`). |
| CVE-2024-29737 | In streampark, the project module integrates Maven's compilation capabilities. The input parameter validation is not strict, allowing attackers to insert commands for remote command execution, The prerequisite for a successful attack is that the user needs to log in to the streampark system and have system-level permissions. Generally, only users of that system have the authorization to log in, and users would not manually input a dangerous operation command. Therefore, the risk level of this vulnerability is very low. Mitigation: all users should upgrade to 2.1.4 Background info: Log in to Streampark using the default username (e.g. test1, test2, test3) and the default password (streampark). Navigate to the Project module, then add a new project. Enter the git repository address of the project and input `touch /tmp/success_2.1.2` as the "Build Argument". Note that there is no verification and interception of the special character "`". As a result, you will find that this injection command will be successfully executed after executing the build. In the latest version, the special symbol ` is intercepted. |
| CVE-2024-29511 | Artifex Ghostscript before 10.03.1, when Tesseract is used for OCR, has a directory traversal issue that allows arbitrary file reading (and writing of error messages to arbitrary files) via OCRLanguage. For example, exploitation can use debug_file /tmp/out and user_patterns_file /etc/passwd. |
| CVE-2024-27036 | In the Linux kernel, the following vulnerability has been resolved: cifs: Fix writeback data corruption cifs writeback doesn't correctly handle the case where cifs_extend_writeback() hits a point where it is considering an additional folio, but this would overrun the wsize - at which point it drops out of the xarray scanning loop and calls xas_pause(). The problem is that xas_pause() advances the loop counter - thereby skipping that page. What needs to happen is for xas_reset() to be called any time we decide we don't want to process the page we're looking at, but rather send the request we are building and start a new one. Fix this by copying and adapting the netfslib writepages code as a temporary measure, with cifs writeback intending to be offloaded to netfslib in the near future. This also fixes the issue with the use of filemap_get_folios_tag() causing retry of a bunch of pages which the extender already dealt with. This can be tested by creating, say, a 64K file somewhere not on cifs (otherwise copy-offload may get underfoot), mounting a cifs share with a wsize of 64000, copying the file to it and then comparing the original file and the copy: dd if=/dev/urandom of=/tmp/64K bs=64k count=1 mount //192.168.6.1/test /mnt -o user=...,pass=...,wsize=64000 cp /tmp/64K /mnt/64K cmp /tmp/64K /mnt/64K Without the fix, the cmp fails at position 64000 (or shortly thereafter). |
| CVE-2024-27022 | In the Linux kernel, the following vulnerability has been resolved: fork: defer linking file vma until vma is fully initialized Thorvald reported a WARNING [1]. And the root cause is below race: CPU 1 CPU 2 fork hugetlbfs_fallocate dup_mmap hugetlbfs_punch_hole i_mmap_lock_write(mapping); vma_interval_tree_insert_after -- Child vma is visible through i_mmap tree. i_mmap_unlock_write(mapping); hugetlb_dup_vma_private -- Clear vma_lock outside i_mmap_rwsem! i_mmap_lock_write(mapping); hugetlb_vmdelete_list vma_interval_tree_foreach hugetlb_vma_trylock_write -- Vma_lock is cleared. tmp->vm_ops->open -- Alloc new vma_lock outside i_mmap_rwsem! hugetlb_vma_unlock_write -- Vma_lock is assigned!!! i_mmap_unlock_write(mapping); hugetlb_dup_vma_private() and hugetlb_vm_op_open() are called outside i_mmap_rwsem lock while vma lock can be used in the same time. Fix this by deferring linking file vma until vma is fully initialized. Those vmas should be initialized first before they can be used. |
| CVE-2024-26753 | In the Linux kernel, the following vulnerability has been resolved: crypto: virtio/akcipher - Fix stack overflow on memcpy sizeof(struct virtio_crypto_akcipher_session_para) is less than sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from stack variable leads stack overflow. Clang reports this issue by commands: make -j CC=clang-14 mrproper >/dev/null 2>&1 make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1 make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/ virtio_crypto_akcipher_algs.o |
| CVE-2024-2563 | A vulnerability has been found in PandaXGO PandaX up to 20240310 and classified as critical. This vulnerability affects the function DeleteImage of the file /apps/system/router/upload.go. The manipulation of the argument fileName with the input ../../../../../../../../../tmp/1.txt leads to path traversal: '../filedir'. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-257062 is the identifier assigned to this vulnerability. |
| CVE-2024-24828 | pkg is tool design to bundle Node.js projects into an executables. Any native code packages built by `pkg` are written to a hardcoded directory. On unix systems, this is `/tmp/pkg/*` which is a shared directory for all users on the same local system. There is no uniqueness to the package names within this directory, they are predictable. An attacker who has access to the same local system has the ability to replace the genuine executables in the shared directory with malicious executables of the same name. A user may then run the malicious executable without realising it has been modified. This package is deprecated. Therefore, there will not be a patch provided for this vulnerability. To check if your executable build by pkg depends on native code and is vulnerable, run the executable and check if `/tmp/pkg/` was created. Users should transition to actively maintained alternatives. We would recommend investigating Node.js 21’s support for single executable applications. Given the decision to deprecate the pkg package, there are no official workarounds or remediations provided by our team. Users should prioritize migrating to other packages that offer similar functionality with enhanced security. |
| CVE-2024-24752 | Bref enable serverless PHP on AWS Lambda. When Bref is used with the Event-Driven Function runtime and the handler is a `RequestHandlerInterface`, then the Lambda event is converted to a PSR7 object. During the conversion process, if the request is a MultiPart, each part is parsed and for each which contains a file, it is extracted and saved in `/tmp` with a random filename starting with `bref_upload_`. The flow mimics what plain PHP does but it does not delete the temporary files when the request has been processed. An attacker could fill the Lambda instance disk by performing multiple MultiPart requests containing files. This vulnerability is patched in 2.1.13. |
| CVE-2024-11150 | The WordPress User Extra Fields plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the delete_tmp_uploaded_file() function in all versions up to, and including, 16.6. This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| CVE-2024-10625 | The WooCommerce Support Ticket System plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the delete_tmp_uploaded_file() function in all versions up to, and including, 17.7. This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| CVE-2024-0520 | A vulnerability in mlflow/mlflow version 8.2.1 allows for remote code execution due to improper neutralization of special elements used in an OS command ('Command Injection') within the `mlflow.data.http_dataset_source.py` module. Specifically, when loading a dataset from a source URL with an HTTP scheme, the filename extracted from the `Content-Disposition` header or the URL path is used to generate the final file path without proper sanitization. This flaw enables an attacker to control the file path fully by utilizing path traversal or absolute path techniques, such as '../../tmp/poc.txt' or '/tmp/poc.txt', leading to arbitrary file write. Exploiting this vulnerability could allow a malicious user to execute commands on the vulnerable machine, potentially gaining access to data and model information. The issue is fixed in version 2.9.0. |
| CVE-2023-6114 | The Duplicator WordPress plugin before 1.5.7.1, Duplicator Pro WordPress plugin before 4.5.14.2 does not disallow listing the `backups-dup-lite/tmp` directory (or the `backups-dup-pro/tmp` directory in the Pro version), which temporarily stores files containing sensitive data. When directory listing is enabled in the web server, this allows unauthenticated attackers to discover and access these sensitive files, which include a full database dump and a zip archive of the site. |
| CVE-2023-49797 | PyInstaller bundles a Python application and all its dependencies into a single package. A PyInstaller built application, elevated as a privileged process, may be tricked by an unprivileged attacker into deleting files the unprivileged user does not otherwise have access to. A user is affected if **all** the following are satisfied: 1. The user runs an application containing either `matplotlib` or `win32com`. 2. The application is ran as administrator (or at least a user with higher privileges than the attacker). 3. The user's temporary directory is not locked to that specific user (most likely due to `TMP`/`TEMP` environment variables pointing to an unprotected, arbitrary, non default location). Either: A. The attacker is able to very carefully time the replacement of a temporary file with a symlink. This switch must occur exactly between `shutil.rmtree()`'s builtin symlink check and the deletion itself B: The application was built with Python 3.7.x or earlier which has no protection against Directory Junctions links. The vulnerability has been addressed in PR #7827 which corresponds to `pyinstaller >= 5.13.1`. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-48292 | The XWiki Admin Tools Application provides tools to help the administration of XWiki. Starting in version 4.4 and prior to version 4.5.1, a cross site request forgery vulnerability in the admin tool for executing shell commands on the server allows an attacker to execute arbitrary shell commands by tricking an admin into loading the URL with the shell command. A very simple possibility for an attack are comments. When the attacker can leave a comment on any page in the wiki it is sufficient to include an image with an URL like `/xwiki/bin/view/Admin/RunShellCommand?command=touch%20/tmp/attacked` in the comment. When an admin views the comment, the file `/tmp/attacked` will be created on the server. The output of the command is also vulnerable to XWiki syntax injection which offers a simple way to execute Groovy in the context of the XWiki installation and thus an even easier way to compromise the integrity and confidentiality of the whole XWiki installation. This has been patched by adding a form token check in version 4.5.1 of the admin tools. Some workarounds are available. The patch can be applied manually to the affected wiki pages. Alternatively, the document `Admin.RunShellCommand` can also be deleted if the possibility to run shell commands isn't needed. |
| CVE-2023-47636 | The Pimcore Admin Classic Bundle provides a Backend UI for Pimcore. Full Path Disclosure (FPD) vulnerabilities enable the attacker to see the path to the webroot/file. e.g.: /home/omg/htdocs/file/. Certain vulnerabilities, such as using the load_file() (within a SQL Injection) query to view the page source, require the attacker to have the full path to the file they wish to view. In the case of pimcore, the fopen() function here doesn't have an error handle when the file doesn't exist on the server so the server response raises the full path "fopen(/var/www/html/var/tmp/export-{ uniqe id}.csv)". This issue has been patched in commit `10d178ef771` which has been included in release version 1.2.1. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| CVE-2023-43783 | Cadence through 0.9.2 2023-08-21 uses an Insecure /tmp/cadence-wineasio.reg Temporary File. The filename is used even if it has been created by a local adversary before Cadence started. The adversary can leverage this to create or overwrite files via a symlink attack. In some kernel configurations, code injection into the Wine registry is possible. |
| CVE-2023-43782 | Cadence through 0.9.2 2023-08-21 uses an Insecure /tmp/.cadence-aloop-daemon.x Temporary File. The file is used even if it has been created by a local adversary before Cadence started. The adversary can then delete the file, disrupting Cadence. |
| CVE-2023-3972 | A vulnerability was found in insights-client. This security issue occurs because of insecure file operations or unsafe handling of temporary files and directories that lead to local privilege escalation. Before the insights-client has been registered on the system by root, an unprivileged local user or attacker could create the /var/tmp/insights-client directory (owning the directory with read, write, and execute permissions) on the system. After the insights-client is registered by root, an attacker could then control the directory content that insights are using by putting malicious scripts into it and executing arbitrary code as root (trivially bypassing SELinux protections because insights processes are allowed to disable SELinux system-wide). |
| CVE-2023-39003 | OPNsense Community Edition before 23.7 and Business Edition before 23.4.2 was discovered to contain insecure permissions in the directory /tmp. |
| CVE-2023-38523 | The web interface on multiple Samsung Harman AMX N-Series devices allows directory listing for the /tmp/ directory, without authentication, exposing sensitive information such as the command history and screenshot of the file being processed. This affects N-Series N1115 Wallplate Video Encoder before 1.15.61, N-Series N1x22A Video Encoder/Decoder before 1.15.61, N-Series N1x33A Video Encoder/Decoder before 1.15.61, N-Series N1x33 Video Encoder/Decoder before 1.15.61, N-Series N2x35 Video Encoder/Decoder before 1.15.61, N-Series N2x35A Video Encoder/Decoder before 1.15.61, N-Series N2xx2 Video Encoder/Decoder before 1.15.61, N-Series N2xx2A Video Encoder/Decoder before 1.15.61, N-Series N3000 Video Encoder/Decoder before 2.12.105, and N-Series N4321 Audio Transceiver before 1.00.06. |
| CVE-2023-34204 | imapsync through 2.229 uses predictable paths under /tmp and /var/tmp in its default mode of operation. Both of these are typically world-writable, and thus (for example) an attacker can modify imapsync's cache and overwrite files belonging to the user who runs it. |
| CVE-2023-33865 | RenderDoc before 1.27 allows local privilege escalation via a symlink attack. It relies on the /tmp/RenderDoc directory regardless of ownership. |
| CVE-2023-32676 | Autolab is a course management service that enables auto-graded programming assignments. A Tar slip vulnerability was found in the Install assessment functionality of Autolab. To exploit this vulnerability an authenticated attacker with instructor permissions needs to upload a specially crafted Tar file. Using the install assessment functionality an attacker can feed a Tar file that contain files with paths pointing outside of the target directory (e.g., `../../../../tmp/tarslipped1.sh`). When the Install assessment form is submitted the files inside of the archives are expanded to the attacker-chosen locations. This issue has been addressed in version 2.11.0. Users are advised to upgrade. |
| CVE-2023-32317 | Autolab is a course management service that enables auto-graded programming assignments. A Tar slip vulnerability was found in the MOSS cheat checker functionality of Autolab. To exploit this vulnerability an authenticated attacker with instructor permissions needs to upload a specially crafted Tar file. Both "Base File Tar" and "Additional file archive" can be fed with Tar files that contain paths outside their target directories (e.g., `../../../../tmp/tarslipped2.sh`). When the MOSS cheat checker is started the files inside of the archives are expanded to the attacker-chosen locations. This issue may lead to arbitrary file write within the scope of the running process. This issue has been addressed in version 2.11.0. Users are advised to upgrade. |
| CVE-2023-31477 | A path traversal issue was discovered on GL.iNet devices before 3.216. Through the file sharing feature, it is possible to share an arbitrary directory, such as /tmp or /etc, because there is no server-side restriction to limit sharing to the USB path. |
| CVE-2023-28338 | Any request send to a Netgear Nighthawk Wifi6 Router (RAX30)'s web service containing a “Content-Type” of “multipartboundary=” will result in the request body being written to “/tmp/mulipartFile” on the device itself. A sufficiently large file will cause device resources to be exhausted, resulting in the device becoming unusable until it is rebooted. |
| CVE-2023-25804 | Roxy-WI is a Web interface for managing Haproxy, Nginx, Apache, and Keepalived servers. Versions prior to 6.3.5.0 have a limited path traversal vulnerability. An SSH key can be saved into an unintended location, for example the `/tmp` folder using a payload `../../../../../tmp/test111_dev`. This issue has been fixed in version 6.3.5.0. |
| CVE-2023-24021 | Incorrect handling of '\0' bytes in file uploads in ModSecurity before 2.9.7 may allow for Web Application Firewall bypasses and buffer over-reads on the Web Application Firewall when executing rules that read the FILES_TMP_CONTENT collection. |
| CVE-2023-23558 | In Eternal Terminal 6.2.1, TelemetryService uses fixed paths in /tmp. For example, a local attacker can create /tmp/.sentry-native-etserver with mode 0777 before the etserver process is started. The attacker can choose to read sensitive information from that file, or modify the information in that file. |
| CVE-2023-1718 | Improper file stream access in /desktop_app/file.ajax.php?action=uploadfile in Bitrix24 22.0.300 allows unauthenticated remote attackers to cause denial-of-service via a crafted "tmp_url". |
| CVE-2023-1350 | A vulnerability was found in liferea. It has been rated as critical. Affected by this issue is the function update_job_run of the file src/update.c of the component Feed Enrichment. The manipulation of the argument source with the input |date >/tmp/bad-item-link.txt leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The name of the patch is 8d8b5b963fa64c7a2122d1bbfbb0bed46e813e59. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-222848. |
| CVE-2023-1289 | A vulnerability was discovered in ImageMagick where a specially created SVG file loads itself and causes a segmentation fault. This flaw allows a remote attacker to pass a specially crafted SVG file that leads to a segmentation fault, generating many trash files in "/tmp," resulting in a denial of service. When ImageMagick crashes, it generates a lot of trash files. These trash files can be large if the SVG file contains many render actions. In a denial of service attack, if a remote attacker uploads an SVG file of size t, ImageMagick generates files of size 103*t. If an attacker uploads a 100M SVG, the server will generate about 10G. |
| CVE-2023-0591 | ubireader_extract_files is vulnerable to path traversal when run against specifically crafted UBIFS files, allowing the attacker to overwrite files outside of the extraction directory (provided the process has write access to that file or directory). This is due to the fact that a node name (dent_node.name) is considered trusted and joined to the extraction directory path during processing, then the node content is written to that joined path. By crafting a malicious UBIFS file with node names holding path traversal payloads (e.g. ../../tmp/outside.txt), it's possible to force ubi_reader to write outside of the extraction directory. This issue affects ubi-reader before 0.8.5. |
| CVE-2022-48800 | In the Linux kernel, the following vulnerability has been resolved: mm: vmscan: remove deadlock due to throttling failing to make progress A soft lockup bug in kcompactd was reported in a private bugzilla with the following visible in dmesg; watchdog: BUG: soft lockup - CPU#33 stuck for 26s! [kcompactd0:479] watchdog: BUG: soft lockup - CPU#33 stuck for 52s! [kcompactd0:479] watchdog: BUG: soft lockup - CPU#33 stuck for 78s! [kcompactd0:479] watchdog: BUG: soft lockup - CPU#33 stuck for 104s! [kcompactd0:479] The machine had 256G of RAM with no swap and an earlier failed allocation indicated that node 0 where kcompactd was run was potentially unreclaimable; Node 0 active_anon:29355112kB inactive_anon:2913528kB active_file:0kB inactive_file:0kB unevictable:64kB isolated(anon):0kB isolated(file):0kB mapped:8kB dirty:0kB writeback:0kB shmem:26780kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 23480320kB writeback_tmp:0kB kernel_stack:2272kB pagetables:24500kB all_unreclaimable? yes Vlastimil Babka investigated a crash dump and found that a task migrating pages was trying to drain PCP lists; PID: 52922 TASK: ffff969f820e5000 CPU: 19 COMMAND: "kworker/u128:3" Call Trace: __schedule schedule schedule_timeout wait_for_completion __flush_work __drain_all_pages __alloc_pages_slowpath.constprop.114 __alloc_pages alloc_migration_target migrate_pages migrate_to_node do_migrate_pages cpuset_migrate_mm_workfn process_one_work worker_thread kthread ret_from_fork This failure is specific to CONFIG_PREEMPT=n builds. The root of the problem is that kcompact0 is not rescheduling on a CPU while a task that has isolated a large number of the pages from the LRU is waiting on kcompact0 to reschedule so the pages can be released. While shrink_inactive_list() only loops once around too_many_isolated, reclaim can continue without rescheduling if sc->skipped_deactivate == 1 which could happen if there was no file LRU and the inactive anon list was not low. |
| CVE-2022-48258 | In Eternal Terminal 6.2.1, etserver and etclient have world-readable logfiles. |
| CVE-2022-48257 | In Eternal Terminal 6.2.1, etserver and etclient have predictable logfile names in /tmp. |
| CVE-2022-47040 | An issue in ASKEY router RTF3505VW-N1 BR_SV_g000_R3505VMN1001_s32_7 allows attackers to escalate privileges via running the tcpdump command after placing a crafted file in the /tmp directory and sending crafted packets through port 80. |
| CVE-2022-41720 | On Windows, restricted files can be accessed via os.DirFS and http.Dir. The os.DirFS function and http.Dir type provide access to a tree of files rooted at a given directory. These functions permit access to Windows device files under that root. For example, os.DirFS("C:/tmp").Open("COM1") opens the COM1 device. Both os.DirFS and http.Dir only provide read-only filesystem access. In addition, on Windows, an os.DirFS for the directory (the root of the current drive) can permit a maliciously crafted path to escape from the drive and access any path on the system. With fix applied, the behavior of os.DirFS("") has changed. Previously, an empty root was treated equivalently to "/", so os.DirFS("").Open("tmp") would open the path "/tmp". This now returns an error. |
| CVE-2022-40299 | In Singular before 4.3.1, a predictable /tmp pathname is used (e.g., by sdb.cc), which allows local users to gain the privileges of other users via a procedure in a file under /tmp. NOTE: this CVE Record is about sdb.cc and similar files in the Singular interface that have predictable /tmp pathnames; this CVE Record is not about the lack of a safe temporary-file creation capability in the Singular language. |
| CVE-2022-37774 | There is a broken access control vulnerability in the Maarch RM 2.8.3 solution. When accessing some specific document (pdf, email) from an archive, a preview is proposed by the application. This preview generates a URL including an md5 hash of the file accessed. The document's URL (https://{url}/tmp/{MD5 hash of the document}) is then accessible without authentication. |
| CVE-2022-31159 | The AWS SDK for Java enables Java developers to work with Amazon Web Services. A partial-path traversal issue exists within the `downloadDirectory` method in the AWS S3 TransferManager component of the AWS SDK for Java v1 prior to version 1.12.261. Applications using the SDK control the `destinationDirectory` argument, but S3 object keys are determined by the application that uploaded the objects. The `downloadDirectory` method allows the caller to pass a filesystem object in the object key but contained an issue in the validation logic for the key name. A knowledgeable actor could bypass the validation logic by including a UNIX double-dot in the bucket key. Under certain conditions, this could permit them to retrieve a directory from their S3 bucket that is one level up in the filesystem from their working directory. This issue’s scope is limited to directories whose name prefix matches the destinationDirectory. E.g. for destination directory`/tmp/foo`, the actor can cause a download to `/tmp/foo-bar`, but not `/tmp/bar`. If `com.amazonaws.services.s3.transfer.TransferManager::downloadDirectory` is used to download an untrusted buckets contents, the contents of that bucket can be written outside of the intended destination directory. Version 1.12.261 contains a patch for this issue. As a workaround, when calling `com.amazonaws.services.s3.transfer.TransferManager::downloadDirectory`, pass a `KeyFilter` that forbids `S3ObjectSummary` objects that `getKey` method return a string containing the substring `..` . |
| CVE-2022-31087 | LDAP Account Manager (LAM) is a webfrontend for managing entries (e.g. users, groups, DHCP settings) stored in an LDAP directory. In versions prior to 8.0 the tmp directory, which is accessible by /lam/tmp/, allows interpretation of .php (and .php5/.php4/.phpt/etc) files. An attacker capable of writing files under www-data privileges can write a web-shell into this directory, and gain a Code Execution on the host. This issue has been fixed in version 8.0. Users unable to upgrade should disallow executing PHP scripts in (/var/lib/ldap-account-manager/)tmp directory. |
| CVE-2022-29187 | Git is a distributed revision control system. Git prior to versions 2.37.1, 2.36.2, 2.35.4, 2.34.4, 2.33.4, 2.32.3, 2.31.4, and 2.30.5, is vulnerable to privilege escalation in all platforms. An unsuspecting user could still be affected by the issue reported in CVE-2022-24765, for example when navigating as root into a shared tmp directory that is owned by them, but where an attacker could create a git repository. Versions 2.37.1, 2.36.2, 2.35.4, 2.34.4, 2.33.4, 2.32.3, 2.31.4, and 2.30.5 contain a patch for this issue. The simplest way to avoid being affected by the exploit described in the example is to avoid running git as root (or an Administrator in Windows), and if needed to reduce its use to a minimum. While a generic workaround is not possible, a system could be hardened from the exploit described in the example by removing any such repository if it exists already and creating one as root to block any future attacks. |
| CVE-2022-27818 | SWHKD 1.1.5 unsafely uses the /tmp/swhkd.sock pathname. There can be an information leak or denial of service. |
| CVE-2022-27816 | SWHKD 1.1.5 unsafely uses the /tmp/swhks.pid pathname. There can be data loss or a denial of service. |
| CVE-2022-27815 | SWHKD 1.1.5 unsafely uses the /tmp/swhkd.pid pathname. There can be an information leak or denial of service. |
| CVE-2022-27378 | An issue in the component Create_tmp_table::finalize of MariaDB Server v10.7 and below was discovered to allow attackers to cause a Denial of Service (DoS) via specially crafted SQL statements. |
| CVE-2022-26386 | Previously Firefox for macOS and Linux would download temporary files to a user-specific directory in <code>/tmp</code>, but this behavior was changed to download them to <code>/tmp</code> where they could be affected by other local users. This behavior was reverted to the original, user-specific directory. <br>*This bug only affects Firefox for macOS and Linux. Other operating systems are unaffected.*. This vulnerability affects Firefox ESR < 91.7 and Thunderbird < 91.7. |
| CVE-2022-24986 | KDE KCron through 21.12.2 uses a temporary file in /tmp when saving, but reuses the filename during an editing session. Thus, someone watching it be created the first time could potentially intercept the file the following time, enabling that person to run unauthorized commands. |
| CVE-2022-24952 | Several denial of service vulnerabilities exist in Eternal Terminal prior to version 6.2.0, including a DoS triggered remotely by an invalid sequence number and a local bug triggered by invalid input sent directly to the IPC socket. |
| CVE-2022-24951 | A race condition exists in Eternal Terminal prior to version 6.2.0 which allows a local attacker to hijack Eternal Terminal's IPC socket, enabling access to Eternal Terminal clients which attempt to connect in the future. |
| CVE-2022-24950 | A race condition exists in Eternal Terminal prior to version 6.2.0 that allows an authenticated attacker to hijack other users' SSH authorization socket, enabling the attacker to login to other systems as the targeted users. The bug is in UserTerminalRouter::getInfoForId(). |
| CVE-2022-24767 | Git for Windows is a fork of Git containing Windows-specific patches. Since part of Git for Windows' uninstaller is copied into the current user's temporary directory and run in that place, it is important to ensure that there are no malicious `.dll` file in that directory that might be loaded as part of loading the executable. However, the default system settings for `TMP` and `TEMP` are to point to `C:\Windows\Temp`, a folder that is world-writable (for historical reasons), and the SYSTEM user account inherits those settings. This means that any authenticated user can place malicious `.dll` files that are loaded when Git for Windows' uninstaller is run via the SYSTEM account. Fixes are available in Git for Windows v2.35.2 or newer. Users unable to upgrade may override SYSTEM's `TMP` environment variable to point to a directory exclusively under SYSTEM's control before running the uninstaller, clear `C:\Windows\Temp` of all `.dll` files before running the uninstaller, or run the uninstaller under an admin account rather than SYSTEM as a workaround. |
| CVE-2022-23950 | In Keylime before 6.3.0, Revocation Notifier uses a fixed /tmp path for UNIX domain socket which can allow unprivileged users a method to prohibit keylime operations. |
| CVE-2021-47541 | In the Linux kernel, the following vulnerability has been resolved: net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code. |
| CVE-2021-47386 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multi-line alignment] |
| CVE-2021-47385 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multipline alignment] |
| CVE-2021-47384 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field If driver read tmp value sufficient for (tmp & 0x08) && (!(tmp & 0x80)) && ((tmp & 0x7) == ((tmp >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multi-line alignments] |
| CVE-2021-47015 | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix RX consumer index logic in the error path. In bnxt_rx_pkt(), the RX buffers are expected to complete in order. If the RX consumer index indicates an out of order buffer completion, it means we are hitting a hardware bug and the driver will abort all remaining RX packets and reset the RX ring. The RX consumer index that we pass to bnxt_discard_rx() is not correct. We should be passing the current index (tmp_raw_cons) instead of the old index (raw_cons). This bug can cause us to be at the wrong index when trying to abort the next RX packet. It can crash like this: #0 [ffff9bbcdf5c39a8] machine_kexec at ffffffff9b05e007 #1 [ffff9bbcdf5c3a00] __crash_kexec at ffffffff9b111232 #2 [ffff9bbcdf5c3ad0] panic at ffffffff9b07d61e #3 [ffff9bbcdf5c3b50] oops_end at ffffffff9b030978 #4 [ffff9bbcdf5c3b78] no_context at ffffffff9b06aaf0 #5 [ffff9bbcdf5c3bd8] __bad_area_nosemaphore at ffffffff9b06ae2e #6 [ffff9bbcdf5c3c28] bad_area_nosemaphore at ffffffff9b06af24 #7 [ffff9bbcdf5c3c38] __do_page_fault at ffffffff9b06b67e #8 [ffff9bbcdf5c3cb0] do_page_fault at ffffffff9b06bb12 #9 [ffff9bbcdf5c3ce0] page_fault at ffffffff9bc015c5 [exception RIP: bnxt_rx_pkt+237] RIP: ffffffffc0259cdd RSP: ffff9bbcdf5c3d98 RFLAGS: 00010213 RAX: 000000005dd8097f RBX: ffff9ba4cb11b7e0 RCX: ffffa923cf6e9000 RDX: 0000000000000fff RSI: 0000000000000627 RDI: 0000000000001000 RBP: ffff9bbcdf5c3e60 R8: 0000000000420003 R9: 000000000000020d R10: ffffa923cf6ec138 R11: ffff9bbcdf5c3e83 R12: ffff9ba4d6f928c0 R13: ffff9ba4cac28080 R14: ffff9ba4cb11b7f0 R15: ffff9ba4d5a30000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 |
| CVE-2021-44512 | World-writable permissions on the /tmp/tmate/sessions directory in tmate-ssh-server 2.3.0 allow a local attacker to compromise the integrity of session handling, or obtain the read-write session ID from a read-only session symlink in this directory. |
| CVE-2021-43828 | PatrOwl is a free and open-source solution for orchestrating Security Operations. In versions prior to 1.77 an improper privilege management (IDOR) has been found in PatrowlManager. All imports findings file is placed under /media/imports/<owner_id>/<tmp_file> In that, owner_id is predictable and tmp_file is in format of import_<ownder_id>_<time_created>, for example: import_1_1639213059582.json This filename is predictable and allows anyone without logging in to download all finding import files This vulnerability is capable of allowing unlogged in users to download all finding imports file. Users are advised to update to 1.7.7 as soon as possible. There are no known workarounds. |
| CVE-2021-43258 | CartView.php in ChurchInfo 1.3.0 allows attackers to achieve remote code execution through insecure uploads. This requires authenticated access tot he ChurchInfo application. Once authenticated, a user can add names to their cart, and compose an email. Uploading an attachment for the email stores the attachment on the site in the /tmp_attach/ folder where it can be accessed with a GET request. There are no limitations on files that can be attached, allowing for malicious PHP code to be uploaded and interpreted by the server. |
| CVE-2021-42624 | A local buffer overflow vulnerability exists in the latest version of Miniftpd in ftpproto.c through the tmp variable, where a crafted payload can be sent to the affected function. |
| CVE-2021-3997 | A flaw was found in systemd. An uncontrolled recursion in systemd-tmpfiles may lead to a denial of service at boot time when too many nested directories are created in /tmp. |
| CVE-2021-3996 | A logic error was found in the libmount library of util-linux in the function that allows an unprivileged user to unmount a FUSE filesystem. This flaw allows a local user on a vulnerable system to unmount other users' filesystems that are either world-writable themselves (like /tmp) or mounted in a world-writable directory. An attacker may use this flaw to cause a denial of service to applications that use the affected filesystems. |
| CVE-2021-36983 | replay-sorcery-kms in Replay Sorcery 0.6.0 allows a local attacker to gain root privileges via a symlink attack on /tmp/replay-sorcery or /tmp/replay-sorcery/device.sock. |
| CVE-2021-33884 | An Unrestricted Upload of File with Dangerous Type vulnerability in B. Braun SpaceCom2 prior to 012U000062 allows remote attackers to upload any files to the /tmp directory of the device through the webpage API. This can result in critical files being overwritten. |
| CVE-2021-31154 | pleaseedit in please before 0.4 uses predictable temporary filenames in /tmp and the target directory. This allows a local attacker to gain full root privileges by staging a symlink attack. |
| CVE-2021-28911 | BAB TECHNOLOGIE GmbH eibPort V3 prior version 3.9.1 allow unauthenticated attackers access to /tmp path which contains some sensitive data (e.g. device serial number). Having those info, a possible loginId can be self-calculated in a brute force attack against BMX interface. This is usable and part of an attack chain to gain SSH root access. |
| CVE-2021-26067 | Affected versions of Atlassian Bamboo allow an unauthenticated remote attacker to view a stack trace that may reveal the path for the home directory in disk and if certain files exists on the tmp directory, via a Sensitive Data Exposure vulnerability in the /chart endpoint. The affected versions are before version 7.2.2. |
| CVE-2021-22968 | A bypass of adding remote files in Concrete CMS (previously concrete5) File Manager leads to remote code execution in Concrete CMS (concrete5) versions 8.5.6 and below.The external file upload feature stages files in the public directory even if they have disallowed file extensions. They are stored in a directory with a random name, but it's possible to stall the uploads and brute force the directory name. You have to be an admin with the ability to upload files, but this bug gives you the ability to upload restricted file types and execute them depending on server configuration.To fix this, a check for allowed file extensions was added before downloading files to a tmp directory.Concrete CMS Security Team gave this a CVSS v3.1 score of 5.4 AV:N/AC:H/PR:H/UI:R/S:C/C:N/I:H/A:NThis fix is also in Concrete version 9.0.0 |
| CVE-2021-22926 | libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake. |
| CVE-2021-22571 | A local attacker could read files from some other users' SA360 reports stored in the /tmp folder during staging process before the files are loaded in BigQuery. We recommend upgrading to version 1.0.3 or above. |
| CVE-2021-21979 | In Bitnami Containers, all Laravel container versions prior to: 6.20.0-debian-10-r107 for Laravel 6, 7.30.1-debian-10-r108 for Laravel 7 and 8.5.11-debian-10-r0 for Laravel 8, the file /tmp/app/.env is generated at the time that the docker image bitnami/laravel was built, and the value of APP_KEY is fixed under certain conditions. This value is crucial for the security of the application and must be randomly generated per Laravel installation. If your application's encryption key is in the hands of a malicious party, that party could craft cookie values using the encryption key and exploit vulnerabilities inherent to PHP object serialization / unserialization, such as calling arbitrary class methods within your application. |
| CVE-2021-0238 | When a MX Series is configured as a Broadband Network Gateway (BNG) based on Layer 2 Tunneling Protocol (L2TP), executing certain CLI command may cause the system to run out of disk space, excessive disk usage may cause other complications. An administrator can use the following CLI command to monitor the available disk space: user@device> show system storage Filesystem Size Used Avail Capacity Mounted on /dev/gpt/junos 19G 18G 147M 99% /.mount <<<<< running out of space tmpfs 21G 16K 21G 0% /.mount/tmp tmpfs 5.3G 1.7M 5.3G 0% /.mount/mfs This issue affects Juniper Networks Junos OS on MX Series: 17.3R1 and later versions prior to 17.4R3-S5, 18.1 versions prior to 18.1R3-S13, 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S7; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R1-S1, 20.4R2; This issue does not affect Juniper Networks Junos OS versions prior to 17.3R1. |
| CVE-2020-8904 | An arbitrary memory overwrite vulnerability in the trusted memory of Asylo exists in versions prior to 0.6.0. As the ecall_restore function fails to validate the range of the output_len pointer, an attacker can manipulate the tmp_output_len value and write to an arbitrary location in the trusted (enclave) memory. We recommend updating Asylo to version 0.6.0 or later. |
| CVE-2020-7040 | storeBackup.pl in storeBackup through 3.5 relies on the /tmp/storeBackup.lock pathname, which allows symlink attacks that possibly lead to privilege escalation. (Local users can also create a plain file named /tmp/storeBackup.lock to block use of storeBackup until an admin manually deletes that file.) |
| CVE-2020-6754 | dotCMS before 5.2.4 is vulnerable to directory traversal, leading to incorrect access control. It allows an attacker to read or execute files under $TOMCAT_HOME/webapps/ROOT/assets (which should be a protected directory). Additionally, attackers can upload temporary files (e.g., .jsp files) into /webapps/ROOT/assets/tmp_upload, which can lead to remote command execution (with the permissions of the user running the dotCMS application). |
| CVE-2020-35766 | The test suite in libopendkim in OpenDKIM through 2.10.3 allows local users to gain privileges via a symlink attack against the /tmp/testkeys file (related to t-testdata.h, t-setup.c, and t-cleanup.c). NOTE: this is applicable to persons who choose to engage in the "A number of self-test programs are included here for unit-testing the library" situation. |
| CVE-2020-35476 | A remote code execution vulnerability occurs in OpenTSDB through 2.4.0 via command injection in the yrange parameter. The yrange value is written to a gnuplot file in the /tmp directory. This file is then executed via the mygnuplot.sh shell script. (tsd/GraphHandler.java attempted to prevent command injections by blocking backticks but this is insufficient.) |
| CVE-2020-28692 | In Gila CMS 1.16.0, an attacker can upload a shell to tmp directy and abuse .htaccess through the logs function for executing PHP files. |
| CVE-2020-24577 | An issue was discovered on D-Link DSL-2888A devices with firmware prior to AU_2.31_V1.1.47ae55. The One Touch application discloses sensitive information, such as the hashed admin login password and the Internet provider connection username and cleartext password, in the application's response body for a /tmp/var/passwd or /tmp/home/wan_stat URI. |
| CVE-2020-24046 | A sandbox escape issue was discovered in TitanHQ SpamTitan Gateway 7.07. It limits the admin user to a restricted shell, allowing execution of a small number of tools of the operating system. This restricted shell can be bypassed after changing the properties of the user admin in the operating system file /etc/passwd. This file cannot be accessed though the restricted shell, but it can be modified by abusing the Backup/Import Backup functionality of the web interface. An authenticated attacker would be able to obtain the file /var/tmp/admin.passwd after executing a Backup operation. This file can be manually modified to change the GUID of the user to 0 (root) and change the restricted shell to a normal shell /bin/sh. After the modification is done, the file can be recompressed to a .tar.bz file and imported again via the Import Backup functionality. The properties of the admin user will be overwritten and a root shell will be granted to the user upon the next successful login. |
| CVE-2020-21523 | A Server-Side Freemarker template injection vulnerability in halo CMS v1.1.3 In the Edit Theme File function. The ftl file can be edited. This is the Freemarker template file. This file can cause arbitrary code execution when it is rendered in the background. exp: <#assign test="freemarker.template.utility.Execute"?new()> ${test("touch /tmp/freemarkerPwned")} |
| CVE-2020-1733 | A race condition flaw was found in Ansible Engine 2.7.17 and prior, 2.8.9 and prior, 2.9.6 and prior when running a playbook with an unprivileged become user. When Ansible needs to run a module with become user, the temporary directory is created in /var/tmp. This directory is created with "umask 77 && mkdir -p <dir>"; this operation does not fail if the directory already exists and is owned by another user. An attacker could take advantage to gain control of the become user as the target directory can be retrieved by iterating '/proc/<pid>/cmdline'. |
| CVE-2020-1645 | When DNS filtering is enabled on Juniper Networks Junos MX Series with one of the following cards MS-PIC, MS-MIC or MS-MPC, an incoming stream of packets processed by the Multiservices PIC Management Daemon (mspmand) process, responsible for managing "URL Filtering service", may crash, causing the Services PIC to restart. While the Services PIC is restarting, all PIC services including DNS filtering service (DNS sink holing) will be bypassed until the Services PIC completes its boot process. If the issue occurs, system core-dumps output will show a crash of mspmand process: root@device> show system core-dumps -rw-rw---- 1 nobody wheel 575685123 <Date> /var/tmp/pics/mspmand.core.<*>.gz This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S8; 18.3 versions prior to 18.3R2-S4, 18.3R3-S1; 18.4 versions prior to 18.4R2-S5, 18.4R3; 19.1 versions prior to 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2. This issue does not affect Juniper Networks Junos OS releases prior to 17.3R2. |
| CVE-2020-15076 | Private Tunnel installer for macOS version 3.0.1 and older versions may corrupt system critical files it should not have access via symlinks in /tmp. |
| CVE-2020-15075 | OpenVPN Connect installer for macOS version 3.2.6 and older may corrupt system critical files it should not have access via symlinks in /tmp. |
| CVE-2020-12846 | Zimbra before 8.8.15 Patch 10 and 9.x before 9.0.0 Patch 3 allows remote code execution via an avatar file. There is potential abuse of /service/upload servlet in the webmail subsystem. A user can upload executable files (exe,sh,bat,jar) in the Contact section of the mailbox as an avatar image for a contact. A user will receive a "Corrupt File" error, but the file is still uploaded and stored locally in /opt/zimbra/data/tmp/upload/, leaving it open to possible remote execution. |
| CVE-2020-12242 | Valve Source allows local users to gain privileges by writing to the /tmp/hl2_relaunch file, which is later executed in the context of a different user account. |
| CVE-2020-12050 | SQLiteODBC 0.9996, as packaged for certain Linux distributions as 0.9996-4, has a race condition leading to root privilege escalation because any user can replace a /tmp/sqliteodbc$$ file with new contents that cause loading of an arbitrary library. |
| CVE-2020-11960 | Xiaomi router R3600 ROM before 1.0.50 is affected by a vulnerability when checking backup file in c_upload interface let attacker able to extract malicious file under any location in /tmp, lead to possible RCE and DoS |
| CVE-2020-11867 | Audacity through 2.3.3 saves temporary files to /var/tmp/audacity-$USER by default. After Audacity creates the temporary directory, it sets its permissions to 755. Any user on the system can read and play the temporary audio .au files located there. |
| CVE-2020-10685 | A flaw was found in Ansible Engine affecting Ansible Engine versions 2.7.x before 2.7.17 and 2.8.x before 2.8.11 and 2.9.x before 2.9.7 as well as Ansible Tower before and including versions 3.4.5 and 3.5.5 and 3.6.3 when using modules which decrypts vault files such as assemble, script, unarchive, win_copy, aws_s3 or copy modules. The temporary directory is created in /tmp leaves the s ts unencrypted. On Operating Systems which /tmp is not a tmpfs but part of the root partition, the directory is only cleared on boot and the decryp emains when the host is switched off. The system will be vulnerable when the system is not running. So decrypted data must be cleared as soon as possible and the data which normally is encrypted ble. |
| CVE-2020-10237 | An issue was discovered in Froxlor through 0.10.15. The installer wrote configuration parameters including passwords into files in /tmp, setting proper permissions only after writing the sensitive data. A local attacker could have disclosed the information if he read the file at the right time, because of _createUserdataConf in install/lib/class.FroxlorInstall.php. |
| CVE-2020-10236 | An issue was discovered in Froxlor before 0.10.14. It created files with static names in /tmp during installation if the installation directory was not writable. This allowed local attackers to cause DoS or disclose information out of the config files, because of _createUserdataConf in install/lib/class.FroxlorInstall.php. |
| CVE-2020-10174 | init_tmp in TeeJee.FileSystem.vala in Timeshift before 20.03 unsafely reuses a preexisting temporary directory in the predictable location /tmp/timeshift. It follows symlinks in this location or uses directories owned by unprivileged users. Because Timeshift also executes scripts under this location, an attacker can attempt to win a race condition to replace scripts created by Timeshift with attacker-controlled scripts. Upon success, an attacker-controlled script is executed with full root privileges. This logic is practically always triggered when Timeshift runs regardless of the command-line arguments used. |
| CVE-2019-9976 | The Boa server configuration on DASAN H660RM devices with firmware 1.03-0022 logs POST data to the /tmp/boa-temp file, which allows logged-in users to read the credentials of administration web interface users. |
| CVE-2019-9858 | Remote code execution was discovered in Horde Groupware Webmail 5.2.22 and 5.2.17. Horde/Form/Type.php contains a vulnerable class that handles image upload in forms. When the Horde_Form_Type_image method onSubmit() is called on uploads, it invokes the functions getImage() and _getUpload(), which uses unsanitized user input as a path to save the image. The unsanitized POST parameter object[photo][img][file] is saved in the $upload[img][file] PHP variable, allowing an attacker to manipulate the $tmp_file passed to move_uploaded_file() to save the uploaded file. By setting the parameter to (for example) ../usr/share/horde/static/bd.php, one can write a PHP backdoor inside the web root. The static/ destination folder is a good candidate to drop the backdoor because it is always writable in Horde installations. (The unsanitized POST parameter went probably unnoticed because it's never submitted by the forms, which default to securely using a random path.) |
| CVE-2019-8320 | A Directory Traversal issue was discovered in RubyGems 2.7.6 and later through 3.0.2. Before making new directories or touching files (which now include path-checking code for symlinks), it would delete the target destination. If that destination was hidden behind a symlink, a malicious gem could delete arbitrary files on the user's machine, presuming the attacker could guess at paths. Given how frequently gem is run as sudo, and how predictable paths are on modern systems (/tmp, /usr, etc.), this could likely lead to data loss or an unusable system. |
| CVE-2019-3937 | Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 stores usernames, passwords, slideshow passcode, and other configuration options in cleartext in the file /tmp/scfgdndf. A local attacker can use this vulnerability to recover sensitive data. |
| CVE-2019-3881 | Bundler prior to 2.1.0 uses a predictable path in /tmp/, created with insecure permissions as a storage location for gems, if locations under the user's home directory are not available. If Bundler is used in a scenario where the user does not have a writable home directory, an attacker could place malicious code in this directory that would be later loaded and executed. |
| CVE-2019-19843 | Incorrect access control in the web interface in Ruckus Wireless Unleashed through 200.7.10.102.64 allows remote credential fetch via an unauthenticated HTTP request involving a symlink with /tmp and web/user/wps_tool_cache. |
| CVE-2019-19228 | Fronius Solar Inverter devices before 3.14.1 (HM 1.12.1) allow attackers to bypass authentication because the password for the today account is stored in the /tmp/web_users.conf file. |
| CVE-2019-18932 | log.c in Squid Analysis Report Generator (sarg) through 2.3.11 allows local privilege escalation. By default, it uses a fixed temporary directory /tmp/sarg. As the root user, sarg creates this directory or reuses an existing one in an insecure manner. An attacker can pre-create the directory, and place symlinks in it (after winning a /tmp/sarg/denied.int_unsort race condition). The outcome will be corrupted or newly created files in privileged file system locations. |
| CVE-2019-18370 | An issue was discovered on Xiaomi Mi WiFi R3G devices before 2.28.23-stable. The backup file is in tar.gz format. After uploading, the application uses the tar zxf command to decompress, so one can control the contents of the files in the decompressed directory. In addition, the application's sh script for testing upload and download speeds reads a URL list from /tmp/speedtest_urls.xml, and there is a command injection vulnerability, as demonstrated by api/xqnetdetect/netspeed. |
| CVE-2019-16241 | On TCL Alcatel Cingular Flip 2 B9HUAH1 devices, PIN authentication can be bypassed by creating a special file within the /data/local/tmp/ directory. The System application that implements the lock screen checks for the existence of a specific file and disables PIN authentication if it exists. This file would typically be created via Android Debug Bridge (adb) over USB. |
| CVE-2019-15513 | An issue was discovered in OpenWrt libuci (aka Library for the Unified Configuration Interface) before 15.05.1 as used on Motorola CX2L MWR04L 1.01 and C1 MWR03 1.01 devices. /tmp/.uci/network locking is mishandled after reception of a long SetWanSettings command, leading to a device hang. |
| CVE-2019-15235 | CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.864 allows an attacker to get a victim's session file name from /home/[USERNAME]/tmp/session/sess_xxxxxx, and the victim's token value from /usr/local/cwpsrv/logs/access_log, then use them to gain access to the victim's password (for the OS and phpMyAdmin) via an attacker account. This is different from CVE-2019-14782. |
| CVE-2019-14782 | CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.856 through 0.9.8.864 allows an attacker to get a victim's session file name from the /tmp directory, and the victim's token value from /usr/local/cwpsrv/logs/access_log, then use them to make a request to extract the victim's password (for the OS and phpMyAdmin) via an attacker account. |
| CVE-2019-13385 | In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.840, File and Directory Information Exposure in filemanager allows attackers to enumerate users and check for active users of the application by reading /tmp/login.log. |
| CVE-2019-13359 | In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.836, a cwpsrv-xxx cookie allows a normal user to craft and upload a session file to the /tmp directory, and use it to become the root user. |
| CVE-2019-13229 | deepin-clone before 1.1.3 uses a fixed path /tmp/partclone.log in the Helper::getPartitionSizeInfo() function to write a log file as root, and follows symlinks there. An unprivileged user can prepare a symlink attack there to create or overwrite files in arbitrary file system locations. The content is not attacker controlled. |
| CVE-2019-13228 | deepin-clone before 1.1.3 uses a fixed path /tmp/repo.iso in the BootDoctor::fix() function to download an ISO file, and follows symlinks there. An unprivileged user can prepare a symlink attack there to create or overwrite files in arbitrary file system locations. The content is not attacker controlled. By winning a race condition to replace the /tmp/repo.iso symlink by an attacker controlled ISO file, further privilege escalation may be possible. |
| CVE-2019-13227 | In GUI mode, deepin-clone before 1.1.3 creates a log file at the fixed path /tmp/.deepin-clone.log as root, and follows symlinks there. An unprivileged user can prepare a symlink attack there to create or overwrite files in arbitrary file system locations. The content is not attacker controlled. |
| CVE-2019-13226 | deepin-clone before 1.1.3 uses a predictable path /tmp/.deepin-clone/mount/<block-dev-basename> in the Helper::temporaryMountDevice() function to temporarily mount a file system as root. An unprivileged user can prepare a symlink at this location to have the file system mounted in an arbitrary location. By winning a race condition, the attacker can also enter the mount point, thereby preventing a subsequent unmount of the file system. |
| CVE-2019-12779 | libqb before 1.0.5 allows local users to overwrite arbitrary files via a symlink attack, because it uses predictable filenames (under /dev/shm and /tmp) without O_EXCL. |
| CVE-2019-12577 | A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v82 for macOS could allow an authenticated, local attacker to run arbitrary code with elevated privileges. The macOS binary openvpn_launcher.64 is setuid root. This binary creates /tmp/pia_upscript.sh when executed. Because the file creation mask (umask) is not reset, the umask value is inherited from the calling process. This value can be manipulated to cause the privileged binary to create files with world writable permissions. A local unprivileged user can modify /tmp/pia_upscript.sh during the connect process to execute arbitrary code as the root user. |
| CVE-2019-12575 | A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v82 for Linux could allow an authenticated, local attacker to run arbitrary code with elevated privileges. The root_runner.64 binary is setuid root. This binary executes /opt/pia/ruby/64/ruby, which in turn attempts to load several libraries under /tmp/ruby-deploy.old/lib. A local unprivileged user can create a malicious library under this path to execute arbitrary code as the root user. |
| CVE-2019-12571 | A vulnerability in the London Trust Media Private Internet Access (PIA) VPN Client v0.9.8 beta (build 02099) for macOS could allow an authenticated, local attacker to overwrite arbitrary files. When the client initiates a connection, the XML /tmp/pia-watcher.plist file is created. If the file exists, it will be truncated and the contents completely overwritten. This file is removed on disconnect. An unprivileged user can create a hard or soft link to arbitrary files owned by any user on the system, including root. This creates a denial of service condition and possible data loss if leveraged by a malicious local user. |
| CVE-2019-12439 | bubblewrap.c in Bubblewrap before 0.3.3 misuses temporary directories in /tmp as a mount point. In some particular configurations (related to XDG_RUNTIME_DIR), a local attacker may abuse this flaw to prevent other users from executing bubblewrap or potentially execute code. |
| CVE-2019-11502 | snap-confine in snapd before 2.38 incorrectly set the ownership of a snap application to the uid and gid of the first calling user. Consequently, that user had unintended access to a private /tmp directory. |
| CVE-2019-10869 | Path Traversal and Unrestricted File Upload exists in the Ninja Forms plugin before 3.0.23 for WordPress (when the Uploads add-on is activated). This allows an attacker to traverse the file system to access files and execute code via the includes/fields/upload.php (aka upload/submit page) name and tmp_name parameters. |
| CVE-2019-10658 | Grandstream GWN7610 before 1.0.8.18 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/controller.icc.update_nds_webroot_from_tmp update_nds_webroot_from_tmp API call. |
| CVE-2019-10656 | Grandstream GWN7000 before 1.0.6.32 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/uci.apply update_nds_webroot_from_tmp API call. |
| CVE-2018-7441 | Leptonica through 1.75.3 uses hardcoded /tmp pathnames, which might allow local users to overwrite arbitrary files or have unspecified other impact by creating files in advance or winning a race condition, as demonstrated by /tmp/junk_split_image.ps in prog/splitimage2pdf.c. |
| CVE-2018-20052 | An issue was discovered on Cerner Connectivity Engine (CCE) 4 devices. The user running the main CCE firmware has NOPASSWD sudo privileges to several utilities that could be used to escalate privileges to root. One example is the "sudo ln -s /tmp/script /etc/cron.hourly/script" command. |
| CVE-2018-19960 | The debug_mode function in web/web.py in OnionShare through 1.3.1, when --debug is enabled, uses the /tmp/onionshare_server.log pathname for logging, which might allow local users to overwrite files or obtain sensitive information by using this pathname. |
| CVE-2018-19637 | Supportutils, before version 3.1-5.7.1, wrote data to static file /tmp/supp_log, allowing local attackers to overwrite files on systems without symlink protection |
| CVE-2018-19046 | keepalived 2.0.8 didn't check for existing plain files when writing data to a temporary file upon a call to PrintData or PrintStats. If a local attacker had previously created a file with the expected name (e.g., /tmp/keepalived.data or /tmp/keepalived.stats), with read access for the attacker and write access for the keepalived process, then this potentially leaked sensitive information. |
| CVE-2018-19044 | keepalived 2.0.8 didn't check for pathnames with symlinks when writing data to a temporary file upon a call to PrintData or PrintStats. This allowed local users to overwrite arbitrary files if fs.protected_symlinks is set to 0, as demonstrated by a symlink from /tmp/keepalived.data or /tmp/keepalived.stats to /etc/passwd. |
| CVE-2018-18654 | Crossroads 2.81 does not properly handle the /tmp directory during a build of xr. A local attacker can first create a world-writable subdirectory in a certain location under the /tmp directory, wait until a user process copies xr there, and then replace the entire contents of this subdirectory to include a Trojan horse xr. |
| CVE-2018-18398 | Xfce Thunar 1.6.15, when Xfce 4.12 is used, mishandles the IBus-Unikey input method for file searches within File Manager, leading to an out-of-bounds read and SEGV. This could potentially be exploited by an arbitrary local user who creates files in /tmp before the victim uses this input method. |
| CVE-2018-16545 | Kaizen Asset Manager (Enterprise Edition) and Training Manager (Enterprise Edition) allow a remote attacker to achieve arbitrary code execution via file impersonation. For example, a malicious dynamic-link library (dll) assumed the identity of a temporary (tmp) file (isxdl.dll) and an executable file assumed the identity of a temporary file (996E.temp). |
| CVE-2018-16367 | In OnlineJudge 2.0, the sandbox has an incorrect access control vulnerability that can write a file anywhere. A user can write a directory listing to /tmp, and can leak file data with a #include. |
| CVE-2018-14650 | It was discovered that sos-collector does not properly set the default permissions of newly created files, making all files created by the tool readable by any local user. A local attacker may use this flaw by waiting for a legit user to run sos-collector and steal the collected data in the /var/tmp directory. |
| CVE-2018-14533 | read_tmp and write_tmp in Inteno IOPSYS allow attackers to gain privileges after writing to /tmp/etc/smb.conf because /var is a symlink to /tmp. |
| CVE-2018-12713 | GIMP through 2.10.2 makes g_get_tmp_dir calls to establish temporary filenames, which may result in a filename that already exists, as demonstrated by the gimp_write_and_read_file function in app/tests/test-xcf.c. This might be leveraged by attackers to overwrite files or read file content that was intended to be private. |
| CVE-2018-12562 | An issue was discovered in the cantata-mounter D-Bus service in Cantata through 2.3.1. The wrapper script 'mount.cifs.wrapper' uses the shell to forward the arguments to the actual mount.cifs binary. The shell evaluates wildcards (such as in an injected string:/home/../tmp/* string). |
| CVE-2018-1150 | NUUO's NVRMini2 3.8.0 and below contains a backdoor that would allow an unauthenticated remote attacker to take over user accounts if the file /tmp/moses exists. |
| CVE-2018-10824 | An issue was discovered on D-Link DWR-116 through 1.06, DIR-140L through 1.02, DIR-640L through 1.02, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. The administrative password is stored in plaintext in the /tmp/csman/0 file. An attacker having a directory traversal (or LFI) can easily get full router access. |
| CVE-2018-10760 | Unrestricted file upload vulnerability in the Files plugin in ProjectPier 0.88 and earlier allows remote authenticated users to execute arbitrary PHP code by uploading a file with an executable extension, then accessing it via a direct request to the file in the tmp directory under the document root. |
| CVE-2018-10562 | An issue was discovered on Dasan GPON home routers. Command Injection can occur via the dest_host parameter in a diag_action=ping request to a GponForm/diag_Form URI. Because the router saves ping results in /tmp and transmits them to the user when the user revisits /diag.html, it's quite simple to execute commands and retrieve their output. |
| CVE-2018-10519 | CMS Made Simple (CMSMS) 2.2.7 contains a privilege escalation vulnerability from ordinary user to admin user by arranging for the eff_uid value within $_COOKIE[$this->_loginkey] to equal 1, because files in the tmp/ directory are accessible through HTTP requests. NOTE: this vulnerability exists because of an incorrect fix for CVE-2018-10084. |
| CVE-2017-9485 | The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to write arbitrary data to a known /var/tmp/sess_* pathname by leveraging the device's operation in UI dev mode. |
| CVE-2017-9387 | An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a shell script called relay.sh which is used for creating new SSH relays for the device so that the device connects to Vera servers. All the parameters passed in this specific script are logged to a log file called log.relay in the /tmp folder. The user can also read all the log files from the device using a script called log.sh. However, when the script loads the log files it displays them with content-type text/html and passes all the logs through the ansi2html binary which converts all the character text including HTML meta-characters correctly to be displayed in the browser. This allows an attacker to use the log files as a storing mechanism for the XSS payload and thus whenever a user navigates to that log.sh script, it enables the XSS payload and allows an attacker to execute his malicious payload on the user's browser. |
| CVE-2017-8934 | PCManFM 1.2.5 insecurely uses /tmp for a socket file, allowing a local user to cause a denial of service (application unavailability). |
| CVE-2017-8933 | Libmenu-cache 1.0.2 insecurely uses /tmp for a socket file, allowing a local user to cause a denial of service (menu unavailability). |
| CVE-2017-8418 | RuboCop 0.48.1 and earlier does not use /tmp in safe way, allowing local users to exploit this to tamper with cache files belonging to other users. |
| CVE-2017-18378 | In NETGEAR ReadyNAS Surveillance before 1.4.3-17 x86 and before 1.1.4-7 ARM, $_GET['uploaddir'] is not escaped and is passed to system() through $tmp_upload_dir, leading to upgrade_handle.php?cmd=writeuploaddir remote command execution. |
| CVE-2017-18196 | Leptonica 1.74.4 constructs unintended pathnames (containing duplicated path components) when operating on files in /tmp subdirectories, which might allow local users to bypass intended file restrictions by leveraging access to a directory located deeper within the /tmp directory tree, as demonstrated by /tmp/ANY/PATH/ANY/PATH/input.tif. |
| CVE-2017-16928 | The arq_updater binary in Arq 5.10 and earlier for Mac allows local users to write to arbitrary files and consequently gain root privileges via a crafted update URL, as demonstrated by file:///tmp/blah/Arq.zip. |
| CVE-2017-1677 | IBM Data Server Driver for JDBC and SQLJ (IBM DB2 for Linux, UNIX and Windows 9.7, 10.1, 10.5, and 11.1) deserializes the contents of /tmp/connlicj.bin which leads to object injection and potentially arbitrary code execution depending on the classpath. IBM X-Force ID: 133999. |
| CVE-2017-16024 | The sync-exec module is used to simulate child_process.execSync in node versions <0.11.9. Sync-exec uses tmp directories as a buffer before returning values. Other users on the server have read access to the tmp directory, possibly allowing an attacker on the server to obtain confidential information from the buffer/tmp file, while it exists. |
| CVE-2017-15288 | The compilation daemon in Scala before 2.10.7, 2.11.x before 2.11.12, and 2.12.x before 2.12.4 uses weak permissions for private files in /tmp/scala-devel/${USER:shared}/scalac-compile-server-port, which allows local users to write to arbitrary class files and consequently gain privileges. |
| CVE-2017-14432 | An exploitable command injection vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP POST can cause a privilege escalation resulting in root shell. An attacker can inject OS commands into the openvpnServer0_tmp= parameter in the "/goform/net\_Web\_get_value" uri to trigger this vulnerability. |
| CVE-2017-12763 | An unspecified server utility in NoMachine before 5.3.10 on Mac OS X and Linux allows authenticated users to gain privileges by gaining access to local files. |
| CVE-2017-0367 | Mediawiki before 1.28.1 / 1.27.2 contains an unsafe use of temporary directory, where having LocalisationCache directory default to system tmp directory is insecure. |
| CVE-2016-7490 | The installation script studioexpressinstall for Teradata Studio Express 15.12.00.00 creates files in /tmp insecurely. A malicious local user could create a symlink in /tmp and possibly clobber system files or perhaps elevate privileges. |
| CVE-2016-7489 | Teradata Virtual Machine Community Edition v15.10's perl script /opt/teradata/gsctools/bin/t2a.pl creates files in /tmp in an insecure manner, this may lead to elevated code execution. |
| CVE-2016-7066 | It was found that the improper default permissions on /tmp/auth directory in JBoss Enterprise Application Platform before 7.1.0 can allow any local user to connect to CLI and allow the user to execute any arbitrary operations. |
| CVE-2016-6564 | Android devices with code from Ragentek contain a privileged binary that performs over-the-air (OTA) update checks. Additionally, there are multiple techniques used to hide the execution of this binary. This behavior could be described as a rootkit. This binary, which resides as /system/bin/debugs, runs with root privileges and does not communicate over an encrypted channel. The binary has been shown to communicate with three hosts via HTTP: oyag[.]lhzbdvm[.]com oyag[.]prugskh[.]net oyag[.]prugskh[.]com Server responses to requests sent by the debugs binary include functionalities to execute arbitrary commands as root, install applications, or update configurations. Examples of a request sent by the client binary: POST /pagt/agent?data={"name":"c_regist","details":{...}} HTTP/1. 1 Host: 114.80.68.223 Connection: Close An example response from the server could be: HTTP/1.1 200 OK {"code": "01", "name": "push_commands", "details": {"server_id": "1" , "title": "Test Command", "comments": "Test", "commands": "touch /tmp/test"}} This binary is reported to be present in the following devices: BLU Studio G BLU Studio G Plus BLU Studio 6.0 HD BLU Studio X BLU Studio X Plus BLU Studio C HD Infinix Hot X507 Infinix Hot 2 X510 Infinix Zero X506 Infinix Zero 2 X509 DOOGEE Voyager 2 DG310 LEAGOO Lead 5 LEAGOO Lead 6 LEAGOO Lead 3i LEAGOO Lead 2S LEAGOO Alfa 6 IKU Colorful K45i Beeline Pro 2 XOLO Cube 5.0 |
| CVE-2016-6173 | NSD before 4.1.11 allows remote DNS master servers to cause a denial of service (/tmp disk consumption and slave server crash) via a zone transfer with unlimited data. |
| CVE-2016-5746 | libstorage, libstorage-ng, and yast-storage improperly store passphrases for encrypted storage devices in a temporary file on disk, which might allow local users to obtain sensitive information by reading the file, as demonstrated by /tmp/libstorage-XXXXXX/pwdf. |
| CVE-2016-5026 | hs.py in OnionShare before 0.9.1 allows local users to modify the hiddenservice by pre-creating the /tmp/onionshare directory. |
| CVE-2016-4968 | The linkreport/tmp/admin_global page in Fortinet FortiWan (formerly AscernLink) before 4.2.5 allows remote authenticated users to discover administrator cookies via a GET request. |
| CVE-2016-3992 | cronic before 3 allows local users to write to arbitrary files via a symlink attack on a (1) cronic.out.$$, (2) cronic.err.$$, or (3) cronic.trace.$$ file in /tmp. |
| CVE-2016-3100 | kinit in KDE Frameworks before 5.23.0 uses weak permissions (644) for /tmp/xauth-xxx-_y, which allows local users to obtain X11 cookies of other users and consequently capture keystrokes and possibly gain privileges by reading the file. |
| CVE-2016-10799 | cPanel before 58.0.4 does not set the Pear tmp directory during a PHP installation (SEC-137). |
| CVE-2016-10369 | unixsocket.c in lxterminal through 0.3.0 insecurely uses /tmp for a socket file, allowing a local user to cause a denial of service (preventing terminal launch), or possibly have other impact (bypassing terminal access control). |
| CVE-2016-10345 | In Phusion Passenger before 5.1.0, a known /tmp filename was used during passenger-install-nginx-module execution, which could allow local attackers to gain the privileges of the passenger user. |
| CVE-2016-10120 | Firejail uses 0777 permissions when mounting (1) /dev, (2) /dev/shm, (3) /var/tmp, or (4) /var/lock, which allows local users to gain privileges. |
| CVE-2016-10119 | Firejail uses 0777 permissions when mounting /tmp, which allows local users to gain privileges. |
| CVE-2015-8109 | Lenovo System Update (formerly ThinkVantage System Update) before 5.07.0019 allows local users to gain privileges by making a prediction of tvsu_tmp_xxxxxXXXXX account credentials that requires knowledge of the time that this account was created, aka a "temporary administrator account vulnerability." |
| CVE-2015-7684 | Unrestricted file upload in GLPI before 0.85.3 allows remote authenticated users to execute arbitrary code by adding a file with an executable extension as an attachment to a new ticket, then accessing it via a direct request to the file in files/_tmp/. |
| CVE-2015-7529 | sosreport in SoS 3.x allows local users to obtain sensitive information from sosreport files or gain privileges via a symlink attack on an archive file in a temporary directory, as demonstrated by sosreport-$hostname-$date.tar in /tmp/sosreport-$hostname-$date. |
| CVE-2015-7442 | consoleinst.sh in IBM Installation Manager before 1.7.4.4 and 1.8.x before 1.8.4 and Packaging Utility before 1.7.4.4 and 1.8.x before 1.8.4 allows local users to gain privileges via a Trojan horse program that is located in /tmp with a name based on a predicted PID value. |
| CVE-2015-6566 | zarafa-autorespond in Zarafa Collaboration Platform (ZCP) before 7.2.1 allows local users to gain privileges via a symlink attack on /tmp/zarafa-vacation-*. |
| CVE-2015-6510 | Multiple cross-site scripting (XSS) vulnerabilities in pfSense before 2.2.3 allow remote attackers to inject arbitrary web script or HTML via the (1) srctrack, (2) use_mfs_tmp_size, or (3) use_mfs_var_size parameter to system_advanced_misc.php; the (4) port, (5) snaplen, or (6) count parameter to diag_packet_capture.php; the (7) pppoe_resethour, (8) pppoe_resetminute, (9) wpa_group_rekey, or (10) wpa_gmk_rekey parameter to interfaces.php; the (11) pppoe_resethour or (12) pppoe_resetminute parameter to interfaces_ppps_edit.php; the (13) member[] parameter to interfaces_qinq_edit.php; the (14) port or (15) retry parameter to load_balancer_pool_edit.php; the (16) pkgrepourl parameter to pkg_mgr_settings.php; the (17) zone parameter to services_captiveportal.php; the port parameter to (18) services_dnsmasq.php or (19) services_unbound.php; the (20) cache_max_ttl or (21) cache_min_ttl parameter to services_unbound_advanced.php; the (22) sshport parameter to system_advanced_admin.php; the (23) id, (24) tunable, (25) descr, or (26) value parameter to system_advanced_sysctl.php; the (27) firmwareurl, (28) repositoryurl, or (29) branch parameter to system_firmware_settings.php; the (30) pfsyncpeerip, (31) synchronizetoip, (32) username, or (33) passwordfld parameter to system_hasync.php; the (34) maxmss parameter to vpn_ipsec_settings.php; the (35) ntp_server1, (36) ntp_server2, (37) wins_server1, or (38) wins_server2 parameter to vpn_openvpn_csc.php; or unspecified parameters to (39) load_balancer_relay_action.php, (40) load_balancer_relay_action_edit.php, (41) load_balancer_relay_protocol.php, or (42) load_balancer_relay_protocol_edit.php. |
| CVE-2015-5719 | app/Controller/TemplatesController.php in Malware Information Sharing Platform (MISP) before 2.3.92 does not properly restrict filenames under the tmp/files/ directory, which has unspecified impact and attack vectors. |
| CVE-2015-5701 | mktexlsr revision 36855, and before revision 36626 as packaged in texlive allows local users to write to arbitrary files via a symlink attack. NOTE: this vulnerability exists due to the reversion of a fix of CVE-2015-5700. |
| CVE-2015-5700 | mktexlsr revision 22855 through revision 36625 as packaged in texlive allows local users to write to arbitrary files via a symlink attack. |
| CVE-2015-5287 | The abrt-hook-ccpp help program in Automatic Bug Reporting Tool (ABRT) before 2.7.1 allows local users with certain permissions to gain privileges via a symlink attack on a file with a predictable name, as demonstrated by /var/tmp/abrt/abrt-hax-coredump or /var/spool/abrt/abrt-hax-coredump. |
| CVE-2015-5273 | The abrt-action-install-debuginfo-to-abrt-cache help program in Automatic Bug Reporting Tool (ABRT) before 2.7.1 allows local users to write to arbitrary files via a symlink attack on unpacked.cpio in a pre-created directory with a predictable name in /var/tmp. |
| CVE-2015-5232 | Race conditions in opa-fm before 10.4.0.0.196 and opa-ff before 10.4.0.0.197. |
| CVE-2015-5191 | VMware Tools prior to 10.0.9 contains multiple file system races in libDeployPkg, related to the use of hard-coded paths under /tmp. Successful exploitation of this issue may result in a local privilege escalation. CVSS:3.0/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H |
| CVE-2015-4277 | The global-configuration implementation on Cisco ASR 9000 devices with software 5.1.3 and 5.3.0 improperly closes vty sessions after a commit/end operation, which allows local users to cause a denial of service (tmp/*config file creation, memory consumption, and device hang) via unspecified vectors, aka Bug ID CSCut93842. |
| CVE-2015-4037 | The slirp_smb function in net/slirp.c in QEMU 2.3.0 and earlier creates temporary files with predictable names, which allows local users to cause a denial of service (instantiation failure) by creating /tmp/qemu-smb.*-* files before the program. |
| CVE-2015-3649 | The open-uri-cached rubygem allows local users to execute arbitrary Ruby code by creating a directory under /tmp containing "openuri-" followed by a crafted UID, and putting Ruby code in said directory once a meta file is created. |
| CVE-2015-3436 | provider/server/ECServer.cpp in Zarafa Collaboration Platform (ZCP) before 7.1.13 and 7.2.x before 7.2.1 allows local users to write to arbitrary files via a symlink attack on /tmp/zarafa-upgrade-lock. |
| CVE-2015-3315 | Automatic Bug Reporting Tool (ABRT) allows local users to read, change the ownership of, or have other unspecified impact on arbitrary files via a symlink attack on (1) /var/tmp/abrt/*/maps, (2) /tmp/jvm-*/hs_error.log, (3) /proc/*/exe, (4) /etc/os-release in a chroot, or (5) an unspecified root directory related to librpm. |
| CVE-2015-3171 | sosreport 3.2 uses weak permissions for generated sosreport archives, which allows local users with access to /var/tmp/ to obtain sensitive information by reading the contents of the archive. |
| CVE-2015-3147 | daemon/abrt-handle-upload.in in Automatic Bug Reporting Tool (ABRT), when moving problem reports from /var/spool/abrt-upload, allows local users to write to arbitrary files or possibly have other unspecified impact via a symlink attack on (1) /var/spool/abrt or (2) /var/tmp/abrt. |
| CVE-2015-1839 | modules/chef.py in SaltStack before 2014.7.4 does not properly handle files in /tmp. |
| CVE-2015-1838 | modules/serverdensity_device.py in SaltStack before 2014.7.4 does not properly handle files in /tmp. |
| CVE-2015-1591 | The kamailio build in kamailio before 4.2.0-2 process allows local users to gain privileges. |
| CVE-2015-1590 | The kamcmd administrative utility and default configuration in kamailio before 4.3.0 use /tmp/kamailio_ctl. |
| CVE-2015-1587 | Unrestricted file upload vulnerability in file_to_index.php in Maarch LetterBox 2.8 and earlier and GEC/GED 1.4 and earlier allows remote attackers to execute arbitrary PHP code by uploading a file with a PHP extension, then accessing it via a request to a predictable filename in tmp/. |
| CVE-2015-1458 | Fortinet FortiAuthenticator 3.0.0 allows local users to bypass intended restrictions and gain privileges by creating /tmp/privexec/dbgcore_enable_shell_access and executing the "shell" command. |
| CVE-2015-0858 | Cool Projects TarDiff allows local users to write to arbitrary files via a symlink attack on a pathname in a /tmp/tardiff-$$ temporary directory. |
| CVE-2015-0794 | modules.d/90crypt/module-setup.sh in the dracut package before 037-17.30.1 in openSUSE 13.2 allows local users to have unspecified impact via a symlink attack on /tmp/dracut_block_uuid.map. |
| CVE-2015-0552 | Directory traversal vulnerability in the gcab_folder_extract function in libgcab/gcab-folder.c in gcab 0.4 allows remote attackers to write to arbitrary files via crafted path in a CAB file, as demonstrated by "\tmp\moo." |
| CVE-2014-9465 | senddocument.php in Zarafa WebApp before 2.0 beta 3 and WebAccess in Zarafa Collaboration Platform (ZCP) 7.x before 7.1.12 beta 1 and 7.2.x before 7.2.0 beta 1 allows remote attackers to cause a denial of service (/tmp disk consumption) by uploading a large number of files. |
| CVE-2014-8994 | The check_diskio plugin 3.2.6 and earlier for Nagios and Icinga allows local users to write to arbitrary files via a symlink attack on a temporary file with a predictable name (tmp/check_diskio_status-*-*). |
| CVE-2014-8991 | pip 1.3 through 1.5.6 allows local users to cause a denial of service (prevention of package installation) by creating a /tmp/pip-build-* file for another user. |
| CVE-2014-6311 | generate_doygen.pl in ace before 6.2.7+dfsg-2 creates predictable file names in the /tmp directory which allows attackers to gain elevated privileges. |
| CVE-2014-5509 | clipedit in the Clipboard module for Perl allows local users to delete arbitrary files via a symlink attack on /tmp/clipedit$$. |
| CVE-2014-5459 | The PEAR_REST class in REST.php in PEAR in PHP through 5.6.0 allows local users to write to arbitrary files via a symlink attack on a (1) rest.cachefile or (2) rest.cacheid file in /tmp/pear/cache/, related to the retrieveCacheFirst and useLocalCache functions. |
| CVE-2014-5449 | Zarafa WebAccess 4.1 and WebApp uses world-readable permissions for the files in their tmp directory, which allows local users to obtain sensitive information by reading temporary session data. |
| CVE-2014-5260 | The (1) mkxmltype and (2) mkdtskel scripts in XML-DT before 0.64 allow local users to overwrite arbitrary files via a symlink attack on a /tmp/_xml_##### temporary file. |
| CVE-2014-5003 | chef/travis-cookbooks/ci_environment/perlbrew/recipes/default.rb in the ciborg gem 3.0.0 for Ruby allows local users to write to arbitrary files and gain privileges via a symlink attack on /tmp/perlbrew-installer. |
| CVE-2014-4996 | lib/vlad/dba/mysql.rb in the VladTheEnterprising gem 0.2 for Ruby allows local users to write to arbitrary files via a symlink attack on /tmp/my.cnf.#{target_host}. |
| CVE-2014-4978 | The rs_filter_graph function in librawstudio/rs-filter.c in rawstudio might allow local users to truncate arbitrary files via a symlink attack on (1) /tmp/rs-filter-graph.png or (2) /tmp/rs-filter-graph. |
| CVE-2014-4386 | Race condition in the App Installation feature in Apple iOS before 8 allows local users to gain privileges and install unverified apps by leveraging /tmp write access. |
| CVE-2014-4199 | vm-support 0.88 in VMware Tools, as distributed with VMware Workstation through 10.0.3 and other products, allows local users to write to arbitrary files via a symlink attack on a file in /tmp. |
| CVE-2014-4150 | The scheme48-send-definition function in cmuscheme48.el in Scheme 48 allows local users to write to arbitrary files via a symlink attack on /tmp/s48lose.tmp. |
| CVE-2014-4040 | snap in powerpc-utils 1.2.20 produces an archive with fstab and yaboot.conf files potentially containing cleartext passwords, and lacks a warning about reviewing this archive to detect included passwords, which might allow remote attackers to obtain sensitive information by leveraging access to a technical-support data stream. |
| CVE-2014-4039 | ppc64-diag 2.6.1 uses 0775 permissions for /tmp/diagSEsnap and does not properly restrict permissions for /tmp/diagSEsnap/snapH.tar.gz, which allows local users to obtain sensitive information by reading files in this archive, as demonstrated by /var/log/messages and /etc/yaboot.conf. |
| CVE-2014-4038 | ppc64-diag 2.6.1 allows local users to overwrite arbitrary files via a symlink attack related to (1) rtas_errd/diag_support.c and /tmp/get_dt_files, (2) scripts/ppc64_diag_mkrsrc and /tmp/diagSEsnap/snapH.tar.gz, or (3) lpd/test/lpd_ela_test.sh and /var/tmp/ras. |
| CVE-2014-3986 | include/tests_webservers in Lynis before 1.5.5 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/lynis.*.unsorted file with an easily determined name. |
| CVE-2014-3982 | include/tests_webservers in Lynis before 1.5.5 on AIX allows local users to overwrite arbitrary files via a symlink attack on a /tmp/lynis.##### file. |
| CVE-2014-3981 | acinclude.m4, as used in the configure script in PHP 5.5.13 and earlier, allows local users to overwrite arbitrary files via a symlink attack on the /tmp/phpglibccheck file. |
| CVE-2014-3701 | eDeploy has tmp file race condition flaws |
| CVE-2014-3563 | Multiple unspecified vulnerabilities in Salt (aka SaltStack) before 2014.1.10 allow local users to have an unspecified impact via vectors related to temporary file creation in (1) seed.py, (2) salt-ssh, or (3) salt-cloud. |
| CVE-2014-3426 | NCSA Mosaic 2.1 through 2.7b5 allows local users to cause a denial of service ("remote control" outage) by creating a /tmp/Mosaic.pid file for every possible PID. |
| CVE-2014-3425 | NCSA Mosaic 2.0 and earlier allows local users to cause a denial of service ("remote control" outage) by creating a /tmp/xmosaic.pid file for every possible PID. |
| CVE-2014-3424 | lisp/net/tramp-sh.el in GNU Emacs 24.3 and earlier allows local users to overwrite arbitrary files via a symlink attack on a /tmp/tramp.##### temporary file. |
| CVE-2014-3423 | lisp/net/browse-url.el in GNU Emacs 24.3 and earlier allows local users to overwrite arbitrary files via a symlink attack on a /tmp/Mosaic.##### temporary file. |
| CVE-2014-3422 | lisp/emacs-lisp/find-gc.el in GNU Emacs 24.3 and earlier allows local users to overwrite arbitrary files via a symlink attack on a temporary file under /tmp/esrc/. |
| CVE-2014-3421 | lisp/gnus/gnus-fun.el in GNU Emacs 24.3 and earlier allows local users to overwrite arbitrary files via a symlink attack on the /tmp/gnus.face.ppm temporary file. |
| CVE-2014-3219 | fish before 2.1.1 allows local users to write to arbitrary files via a symlink attack on (1) /tmp/fishd.log.%s, (2) /tmp/.pac-cache.$USER, (3) /tmp/.yum-cache.$USER, or (4) /tmp/.rpm-cache.$USER. |
| CVE-2014-2905 | fish (aka fish-shell) 1.16.0 before 2.1.1 does not properly check the credentials, which allows local users to gain privileges via the universal variable socket, related to /tmp/fishd.socket.user permissions. |
| CVE-2014-2524 | The _rl_tropen function in util.c in GNU readline before 6.3 patch 3 allows local users to create or overwrite arbitrary files via a symlink attack on a /var/tmp/rltrace.[PID] file. |
| CVE-2014-2312 | The main function in android_main.cpp in thermald allows local users to write to arbitrary files via a symlink attack on /tmp/thermald.pid. |
| CVE-2014-1933 | The (1) JpegImagePlugin.py and (2) EpsImagePlugin.py scripts in Python Image Library (PIL) 1.1.7 and earlier and Pillow before 2.3.1 uses the names of temporary files on the command line, which makes it easier for local users to conduct symlink attacks by listing the processes. |
| CVE-2014-1932 | The (1) load_djpeg function in JpegImagePlugin.py, (2) Ghostscript function in EpsImagePlugin.py, (3) load function in IptcImagePlugin.py, and (4) _copy function in Image.py in Python Image Library (PIL) 1.1.7 and earlier and Pillow before 2.3.1 do not properly create temporary files, which allow local users to overwrite arbitrary files and obtain sensitive information via a symlink attack on the temporary file. |
| CVE-2014-1876 | The unpacker::redirect_stdio function in unpack.cpp in unpack200 in OpenJDK 6, 7, and 8; Oracle Java SE 5.0u61, 6u71, 7u51, and 8; JRockit R27.8.1 and R28.3.1; and Java SE Embedded 7u51 does not securely create temporary files when a log file cannot be opened, which allows local users to overwrite arbitrary files via a symlink attack on /tmp/unpack.log. |
| CVE-2014-1875 | The Capture::Tiny module before 0.24 for Perl allows local users to write to arbitrary files via a symlink attack on a temporary file. |
| CVE-2014-1838 | The (1) extract_keys_from_pdf and (2) fill_pdf functions in pdf_ext.py in logilab-commons before 0.61.0 allows local users to overwrite arbitrary files and possibly have other unspecified impact via a symlink attack on /tmp/toto.fdf. |
| CVE-2014-1624 | Race condition in the xdg.BaseDirectory.get_runtime_dir function in python-xdg 0.25 allows local users to overwrite arbitrary files by pre-creating /tmp/pyxdg-runtime-dir-fallback-victim to point to a victim-owned location, then replacing it with a symlink to an attacker-controlled location once the get_runtime_dir function is called. |
| CVE-2014-1604 | The parser cache functionality in parsergenerator.py in RPLY (aka python-rply) before 0.7.1 allows local users to spoof cache data by pre-creating a temporary rply-*.json file with a predictable name. |
| CVE-2014-1595 | Mozilla Firefox before 34.0, Firefox ESR 31.x before 31.3, and Thunderbird before 31.3 on Apple OS X 10.10 omit a CoreGraphics disable-logging action that is needed by jemalloc-based applications, which allows local users to obtain sensitive information by reading /tmp files, as demonstrated by credential information. |
| CVE-2014-1420 | On desktop, Ubuntu UI Toolkit's StateSaver would serialise data on tmp/ files which an attacker could use to expose potentially sensitive data. StateSaver would also open files without the O_EXCL flag. An attacker could exploit this to launch a symlink attack, though this is partially mitigated by symlink and hardlink restrictions in Ubuntu. Fixed in 1.1.1188+14.10.20140813.4-0ubuntu1. |
| CVE-2014-1402 | The default configuration for bccache.FileSystemBytecodeCache in Jinja2 before 2.7.2 does not properly create temporary files, which allows local users to gain privileges via a crafted .cache file with a name starting with __jinja2_ in /tmp. |
| CVE-2014-0476 | The slapper function in chkrootkit before 0.50 does not properly quote file paths, which allows local users to execute arbitrary code via a Trojan horse executable. NOTE: this is only a vulnerability when /tmp is not mounted with the noexec option. |
| CVE-2014-0145 | Multiple buffer overflows in QEMU before 1.7.2 and 2.x before 2.0.0, allow local users to cause a denial of service (crash) or possibly execute arbitrary code via a large (1) L1 table in the qcow2_snapshot_load_tmp in the QCOW 2 block driver (block/qcow2-snapshot.c) or (2) uncompressed chunk, (3) chunk length, or (4) number of sectors in the DMG block driver (block/dmg.c). |
| CVE-2014-0143 | Multiple integer overflows in the block drivers in QEMU, possibly before 2.0.0, allow local users to cause a denial of service (crash) via a crafted catalog size in (1) the parallels_open function in block/parallels.c or (2) bochs_open function in bochs.c, a large L1 table in the (3) qcow2_snapshot_load_tmp in qcow2-snapshot.c or (4) qcow2_grow_l1_table function in qcow2-cluster.c, (5) a large request in the bdrv_check_byte_request function in block.c and other block drivers, (6) crafted cluster indexes in the get_refcount function in qcow2-refcount.c, or (7) a large number of blocks in the cloop_open function in cloop.c, which trigger buffer overflows, memory corruption, large memory allocations and out-of-bounds read and writes. |
| CVE-2014-0110 | Apache CXF before 2.6.14 and 2.7.x before 2.7.11 allows remote attackers to cause a denial of service (/tmp disk consumption) via a large invalid SOAP message. |
| CVE-2014-0047 | Docker before 1.5 allows local users to have unspecified impact via vectors involving unsafe /tmp usage. |
| CVE-2014-0027 | The play_wave_from_socket function in audio/auserver.c in Flite 1.4 allows local users to modify arbitrary files via a symlink attack on /tmp/awb.wav. NOTE: some of these details are obtained from third party information. |
| CVE-2013-7426 | Insecure Temporary file vulnerability in /tmp/kamailio_fifo in kamailio 4.0.1. |
| CVE-2013-7283 | Race condition in the libreswan.spec files for Red Hat Enterprise Linux (RHEL) and Fedora packages in libreswan 3.6 has unspecified impact and attack vectors, involving the /var/tmp/libreswan-nss-pwd temporary file. |
| CVE-2013-7171 | Slackware 14.0 and 14.1, and Slackware LLVM 3.0-i486-2 and 3.3-i486-2, contain world-writable permissions on the /tmp directory which could allow remote attackers to execute arbitrary code with root privileges. |
| CVE-2013-7005 | D-Link DSR-150 with firmware before 1.08B44; DSR-150N with firmware before 1.05B64; DSR-250 and DSR-250N with firmware before 1.08B44; and DSR-500, DSR-500N, DSR-1000, and DSR-1000N with firmware before 1.08B77 stores account passwords in cleartext, which allows local users to obtain sensitive information by reading the Users[#]["Password"] fields in /tmp/teamf1.cfg.ascii. |
| CVE-2013-6955 | webman/imageSelector.cgi in Synology DiskStation Manager (DSM) 4.0 before 4.0-2259, 4.2 before 4.2-3243, and 4.3 before 4.3-3810 Update 1 allows remote attackers to append data to arbitrary files, and consequently execute arbitrary code, via a pathname in the SLICEUPLOAD X-TMP-FILE HTTP header. |
| CVE-2013-6501 | The default soap.wsdl_cache_dir setting in (1) php.ini-production and (2) php.ini-development in PHP through 5.6.7 specifies the /tmp directory, which makes it easier for local users to conduct WSDL injection attacks by creating a file under /tmp with a predictable filename that is used by the get_sdl function in ext/soap/php_sdl.c. |
| CVE-2013-6493 | The LiveConnect implementation in plugin/icedteanp/IcedTeaNPPlugin.cc in IcedTea-Web before 1.4.2 allows local users to read the messages between a Java applet and a web browser by pre-creating a temporary socket file with a predictable name in /tmp. |
| CVE-2013-6402 | base/pkit.py in HP Linux Imaging and Printing (HPLIP) through 3.13.11 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/hp-pkservice.log temporary file. |
| CVE-2013-4437 | Unspecified vulnerability in salt-ssh in Salt (aka SaltStack) 0.17.0 has unspecified impact and vectors related to "insecure Usage of /tmp." |
| CVE-2013-4419 | The guestfish command in libguestfs 1.20.12, 1.22.7, and earlier, when using the --remote or --listen option, does not properly check the ownership of /tmp/.guestfish-$UID/ when creating a temporary socket file in this directory, which allows local users to write to the socket and execute arbitrary commands by creating /tmp/.guestfish-$UID/ in advance. |
| CVE-2013-4364 | (1) oo-analytics-export and (2) oo-analytics-import in the openshift-origin-broker-util package in Red Hat OpenShift Enterprise 1 and 2 allow local users to have unspecified impact via a symlink attack on an unspecified file in /tmp. |
| CVE-2013-4318 | File injection vulnerability in Ruby gem Features 0.3.0 allows remote attackers to inject malicious html in the /tmp directory. |
| CVE-2013-4260 | lib/ansible/playbook/__init__.py in Ansible 1.2.x before 1.2.3, when playbook does not run due to an error, allows local users to overwrite arbitrary files via a symlink attack on a retry file with a predictable name in /var/tmp/ansible/. |
| CVE-2013-4259 | runner/connection_plugins/ssh.py in Ansible before 1.2.3, when using ControlPersist, allows local users to redirect a ssh session via a symlink attack on a socket file with a predictable name in /tmp/. |
| CVE-2013-4215 | The IPXPING_COMMAND in contrib/check_ipxping.c in Nagios Plugins 1.4.16 allows local users to gain privileges via a symlink attack on /tmp/ipxping/ipxping. |
| CVE-2013-4214 | rss-newsfeed.php in Nagios Core 3.4.4, 3.5.1, and earlier, when MAGPIE_CACHE_ON is set to 1, allows local users to overwrite arbitrary files via a symlink attack on /tmp/magpie_cache. |
| CVE-2013-4169 | GNOME Display Manager (gdm) before 2.21.1 allows local users to change permissions of arbitrary directories via a symlink attack on /tmp/.X11-unix/. |
| CVE-2013-4159 | ctdb before 2.3 in OpenSUSE 12.3 and 13.1 does not create temporary files securely, which has unspecified impact related to "several temp file vulnerabilities" in (1) tcp/tcp_connect.c, (2) server/eventscript.c, (3) tools/ctdb_diagnostics, (4) config/gdb_backtrace, and (5) include/ctdb_private.h. |
| CVE-2013-4157 | Red Hat Storage 2.0 allows local users to overwrite arbitrary files via a symlink attack on the (1) e, (2) local-bricks.list, (3) bricks.err, or (4) limits.conf files in /tmp. |
| CVE-2013-4136 | ext/common/ServerInstanceDir.h in Phusion Passenger gem before 4.0.6 for Ruby allows local users to gain privileges or possibly change the ownership of arbitrary directories via a symlink attack on a directory with a predictable name in /tmp/. |
| CVE-2013-2645 | Multiple cross-site request forgery (CSRF) vulnerabilities on the TP-LINK WR1043N router with firmware TL-WR1043ND_V1_120405 allow remote attackers to hijack the authentication of administrators for requests that (1) enable FTP access (aka "FTP directory traversal") to /tmp via the shareEntire parameter to userRpm/NasFtpCfgRpm.htm, (2) change the FTP administrative password via the nas_admin_pwd parameter to userRpm/NasUserAdvRpm.htm, (3) enable FTP on the WAN interface via the internetA parameter to userRpm/NasFtpCfgRpm.htm, (4) launch the FTP service via the startFtp parameter to userRpm/NasFtpCfgRpm.htm, or (5) enable or disable bandwidth limits via the QoSCtrl parameter to userRpm/QoSCfgRpm.htm. |
| CVE-2013-2561 | OpenFabrics ibutils 1.5.7 allows local users to overwrite arbitrary files via a symlink attack on (1) ibdiagnet.db, (2) ibdiagnet.fdbs, (3) ibdiagnet_ibis.log, (4) ibdiagnet.log, (5) ibdiagnet.lst, (6) ibdiagnet.mcfdbs, (7) ibdiagnet.pkey, (8) ibdiagnet.psl, (9) ibdiagnet.slvl, or (10) ibdiagnet.sm in /tmp/. |
| CVE-2013-2217 | cache.py in Suds 0.4, when tempdir is set to None, allows local users to redirect SOAP queries and possibly have other unspecified impact via a symlink attack on a cache file with a predictable name in /tmp/suds/. |
| CVE-2013-2142 | userpref.c in libimobiledevice 1.1.4, when $HOME and $XDG_CONFIG_HOME are not set, allows local users to overwrite arbitrary files via a symlink attack on (1) HostCertificate.pem, (2) HostPrivateKey.pem, (3) libimobiledevicerc, (4) RootCertificate.pem, or (5) RootPrivateKey.pem in /tmp/root/.config/libimobiledevice/. |
| CVE-2013-2119 | Phusion Passenger gem before 3.0.21 and 4.0.x before 4.0.5 for Ruby allows local users to cause a denial of service (prevent application start) or gain privileges by pre-creating a temporary "config" file in a directory with a predictable name in /tmp/ before it is used by the gem. |
| CVE-2013-2105 | The Show In Browser (show_in_browser) gem 0.0.3 for Ruby allows local users to inject arbitrary web script or HTML via a symlink attack on /tmp/browser.html. |
| CVE-2013-2035 | Race condition in hawtjni-runtime/src/main/java/org/fusesource/hawtjni/runtime/Library.java in HawtJNI before 1.8, when a custom library path is not specified, allows local users to execute arbitrary Java code by overwriting a temporary JAR file with a predictable name in /tmp. |
| CVE-2013-2030 | keystone/middleware/auth_token.py in OpenStack Nova Folsom, Grizzly, and Havana uses an insecure temporary directory for storing signing certificates, which allows local users to spoof servers by pre-creating this directory, which is reused by Nova, as demonstrated using /tmp/keystone-signing-nova on Fedora. |
| CVE-2013-2029 | nagios.upgrade_to_v3.sh, as distributed by Red Hat and possibly others for Nagios Core 3.4.4, 3.5.1, and earlier, allows local users to overwrite arbitrary files via a symlink attack on a temporary nagioscfg file with a predictable name in /tmp/. |
| CVE-2013-1888 | pip before 1.3 allows local users to overwrite arbitrary files via a symlink attack on a file in the /tmp/pip-build temporary directory. |
| CVE-2013-1815 | PackStack 2012.2.3 in Red Hat OpenStack Essex and Folsom can create the answer file in insecure directories such as /tmp or the current working directory, which allows local users to modify deployed systems by changing this file. |
| CVE-2013-1495 | asr in Oracle Auto Service Request in Oracle Support Tools before 4.3.2 allows local users to modify arbitrary files via a symlink attack on a predictable filename in /tmp. |
| CVE-2013-1444 | A certain Debian patch for txt2man 1.5.5, as used in txt2man 1.5.5-2, 1.5.5-4, and others, allows local users to overwrite arbitrary files via a symlink attack on /tmp/2222. |
| CVE-2013-1427 | The configuration file for the FastCGI PHP support for lighttpd before 1.4.28 on Debian GNU/Linux creates a socket file with a predictable name in /tmp, which allows local users to hijack the PHP control socket and perform unauthorized actions such as forcing the use of a different version of PHP via a symlink attack or a race condition. |
| CVE-2013-0798 | Mozilla Firefox before 20.0 on Android uses world-writable and world-readable permissions for the app_tmp installation directory in the local filesystem, which allows attackers to modify add-ons before installation via an application that leverages the time window during which app_tmp is used. |
| CVE-2013-0350 | tmp_smtp.c in pktstat 1.8.5 allows local users to overwrite arbitrary files via a symlink attack on /tmp/smtp.log. |
| CVE-2013-0265 | The redirect_stderr function in xnbd_common.c in xnbd-server and xndb-wrapper in xNBD 0.1.0 allow local users to overwrite arbitrary files via a symlink attack on /tmp/xnbd.log. |
| CVE-2013-0261 | (1) installer/basedefs.py and (2) modules/ospluginutils.py in PackStack allows local users to overwrite arbitrary files via a symlink attack on a temporary file with a predictable name in /tmp. |
| CVE-2013-0248 | The default configuration of javax.servlet.context.tempdir in Apache Commons FileUpload 1.0 through 1.2.2 uses the /tmp directory for uploaded files, which allows local users to overwrite arbitrary files via an unspecified symlink attack. |
| CVE-2013-0200 | HP Linux Imaging and Printing (HPLIP) through 3.12.4 allows local users to overwrite arbitrary files via a symlink attack on the (1) /tmp/hpcupsfilterc_#.bmp, (2) /tmp/hpcupsfilterk_#.bmp, (3) /tmp/hpcups_job#.out, (4) /tmp/hpijs_#####.out, or (5) /tmp/hpps_job#.out temporary file, a different vulnerability than CVE-2011-2722. |
| CVE-2013-0180 | Insecure temporary file vulnerability in Redis 2.6 related to /tmp/redis.ds. |
| CVE-2013-0178 | Insecure temporary file vulnerability in Redis before 2.6 related to /tmp/redis-%p.vm. |
| CVE-2013-0165 | cartridges/openshift-origin-cartridge-mongodb-2.2/info/bin/dump.sh in OpenShift does not properly create files in /tmp. |
| CVE-2013-0164 | The lockwrap function in port-proxy/bin/openshift-port-proxy-cfg in Red Hat OpenShift Origin before 1.1 allows local users to overwrite arbitrary files via a symlink attack on a temporary file with a predictable name in /tmp. |
| CVE-2013-0163 | OpenShift haproxy cartridge: predictable /tmp in set-proxy connection hook which could facilitate DoS |
| CVE-2013-0162 | The diff_pp function in lib/gauntlet_rubyparser.rb in the ruby_parser gem 3.1.1 and earlier for Ruby allows local users to overwrite arbitrary files via a symlink attack on a temporary file with a predictable name in /tmp. |
| CVE-2013-0159 | The fedora-business-cards package before 1-0.1.beta1.fc17 on Fedora 17 and before 1-0.1.beta1.fc18 on Fedora 18 allows local users to cause a denial of service or write to arbitrary files via a symlink attack on /tmp/fedora-business-cards-buffer.svg. |
| CVE-2012-6648 | gdm/guest-session-cleanup.sh in gdm-guest-session 0.24 and earlier, as used in Ubuntu Linux 10.04 LTS, 10.10, and 11.04, allows local users to delete arbitrary files via a space in the name of a file in /tmp. NOTE: this identifier was SPLIT from CVE-2012-0943 per ADT1/ADT2 due to different codebases and affected versions. CVE-2012-0943 is used for the guest-account issue. |
| CVE-2012-6114 | The git-changelog utility in git-extras 1.7.0 allows local users to overwrite arbitrary files via a symlink attack on (1) /tmp/changelog or (2) /tmp/.git-effort. |
| CVE-2012-6108 | HP Linux Imaging and Printing (HPLIP) before 3.13.2 uses world-writable permissions for /var/log/hp and /var/log/hp/tmp, which allows local users to delete log files via standard filesystem operations. |
| CVE-2012-6076 | Inkscape before 0.48.4 reads .eps files from /tmp instead of the current directory, which might cause Inkspace to process unintended files, allow local users to obtain sensitive information, and possibly have other unspecified impacts. |
| CVE-2012-5893 | Unrestricted file upload vulnerability in hava_upload.php in Havalite CMS 1.1.0 and earlier allows remote attackers to execute arbitrary code by uploading a file with a .php;.gif extension, then accessing it via a direct request to the file in tmp/files/. |
| CVE-2012-5663 | The isearch package (textproc/isearch) before 1.47.01nb1 uses the tempnam() function to create insecure temporary files into a publicly-writable area (/tmp). |
| CVE-2012-5574 | lib/form/sfForm.class.php in Symfony CMS before 1.4.20 allows remote attackers to read arbitrary files via a crafted upload request. |
| CVE-2012-5564 | android-tools 4.1.1 in Android Debug Bridge (ADB) allows local users to overwrite arbitrary files via a symlink attack on /tmp/adb.log. |
| CVE-2012-5530 | The (1) pcmd and (2) pmlogger init scripts in Performance Co-Pilot (PCP) before 3.6.10 allow local users to overwrite arbitrary files via a symlink attack on a /var/tmp/##### temporary file. |
| CVE-2012-5509 | aeolus-configserver-setup in the Aeolas Configuration Server, as used in Red Hat CloudForms Cloud Engine before 1.1.2, uses world-readable permissions for a temporary file in /tmp, which allows local users to read credentials by reading this file. |
| CVE-2012-5355 | welcome.py in xdiagnose before 2.5.2ubuntu0.1 allows local users to overwrite arbitrary files via a symlink attack on a temporary file with a predictable name in /tmp. |
| CVE-2012-4454 | openCryptoki before 2.4.1, when using spinlocks, allows local users to create or set world-writable permissions on arbitrary files via a symlink attack on the (1) .pkapi_xpk or (2) .pkcs11spinloc file in /tmp. |
| CVE-2012-3537 | The Crowbar Ohai plugin (chef/cookbooks/ohai/files/default/plugins/crowbar.rb) in the Deployer Barclamp in Crowbar, possibly 1.4 and earlier, allows local users to execute arbitrary shell commands via vectors related to "insecure handling of tmp files" and predictable file names. |
| CVE-2012-3454 | eXtplorer 2.1.0b6 uses world writable permissions for the /var/lib/extplorer/ftp_tmp directory, which allows local users to delete or overwrite arbitrary files. |
| CVE-2012-3440 | A certain Red Hat script for sudo 1.7.2 on Red Hat Enterprise Linux (RHEL) 5 allows local users to overwrite arbitrary files via a symlink attack on the /var/tmp/nsswitch.conf.bak temporary file. |
| CVE-2012-3378 | The register_application function in atk-adaptor/bridge.c in GNOME at-spi2-atk 2.5.2 does not seed the random number generator and generates predictable temporary file names, which makes it easier for local users to create or truncate files via a symlink attack on a temporary socket file in /tmp/at-spi2. |
| CVE-2012-3355 | (1) AlbumTab.py, (2) ArtistTab.py, (3) LinksTab.py, and (4) LyricsTab.py in the Context module in GNOME Rhythmbox 0.13.3 and earlier allows local users to execute arbitrary code via a symlink attack on a temporary HTML template file in the /tmp/context directory. |
| CVE-2012-3345 | ioquake3 before r2253 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/ioq3.pid temporary file. |
| CVE-2012-2760 | mod_auth_openid before 0.7 for Apache uses world-readable permissions for /tmp/mod_auth_openid.db, which allows local users to obtain session ids. |
| CVE-2012-2652 | The bdrv_open function in Qemu 1.0 does not properly handle the failure of the mkstemp function, when in snapshot node, which allows local users to overwrite or read arbitrary files via a symlink attack on an unspecified temporary file. |
| CVE-2012-1989 | telnet.rb in Puppet 2.7.x before 2.7.13 and Puppet Enterprise (PE) 1.2.x, 2.0.x, and 2.5.x before 2.5.1 allows local users to overwrite arbitrary files via a symlink attack on the NET::Telnet connection log (/tmp/out.log). |
| CVE-2012-1916 | @Mail WebMail Client in AtMail Open-Source before 1.05 allows remote attackers to execute arbitrary code via an e-mail attachment with an executable extension, leading to the creation of an executable file under tmp/. |
| CVE-2012-1906 | Puppet 2.6.x before 2.6.15 and 2.7.x before 2.7.13, and Puppet Enterprise (PE) Users 1.0, 1.1, 1.2.x, 2.0.x, and 2.5.x before 2.5.1 uses predictable file names when installing Mac OS X packages from a remote source, which allows local users to overwrite arbitrary files or install arbitrary packages via a symlink attack on a temporary file in /tmp. |
| CVE-2012-1105 | An Information Disclosure vulnerability exists in the Jasig Project php-pear-CAS 1.2.2 package in the /tmp directory. The Central Authentication Service client library archives the debug logging file in an insecure manner. |
| CVE-2012-0943 | debian/guest-account in Light Display Manager (lightdm) 1.0.x before 1.0.6 and 1.1.x before 1.1.7, as used in Ubuntu Linux 11.10, allows local users to delete arbitrary files via a space in the name of a file in /tmp. NOTE: this identifier was SPLIT per ADT1/ADT2 due to different codebases and affected versions. CVE-2012-6648 has been assigned for the gdm-guest-session issue. |
| CVE-2012-0860 | Multiple untrusted search path vulnerabilities in Red Hat Enterprise Virtualization Manager (RHEV-M) before 3.1, when adding a host, allow local users to gain privileges via a Trojan horse (1) deployUtil.py or (2) vds_bootstrap.py Python module in /tmp/. |
| CVE-2012-0426 | Race condition in sap_suse_cluster_connector before 1.0.0-0.8.1 in SUSE Linux Enterprise for SAP Applications 11 SP2 allows local users to have an unspecified impact via vectors related to a tmp/ directory. |
| CVE-2011-5287 | Multiple cross-site scripting (XSS) vulnerabilities in HESK before 2.4.1 allow remote attackers to inject arbitrary web script or HTML via the (1) hesk_settings[tmp_title] or (2) hesklang[ENCODING] parameter to inc/header.inc.php; the hesklang[attempt] parameter to (3) inc/assignment_search.inc.php, (4) inc/attachments.inc.php, (5) inc/common.inc.php, (6) inc/database.inc.php, (7) inc/prepare_ticket_search.inc.php, (8) inc/print_tickets.inc.php, (9) inc/show_admin_nav.inc.php, (10) inc/show_search_form.inc.php, or (11) inc/ticket_list.inc.php; or (12) the PATH_INFO to language/en/text.php. |
| CVE-2011-5146 | Bokken before 1.6 and 1.5-x before 1.5-3 for Debian allows local users to overwrite arbitrary files via a symlink attack on /tmp/graph.dot. |
| CVE-2011-4834 | The GetInstalledPackages function in the configuration tool in HP Application Lifestyle Management (ALM) 11 on AIX, HP-UX, and Solaris allows local users to gain privileges via (1) a Trojan horse /tmp/tmp.txt FIFO or (2) a symlink attack on /tmp/tmp.txt. |
| CVE-2011-4617 | virtualenv.py in virtualenv before 1.5 allows local users to overwrite arbitrary files via a symlink attack on a certain file in /tmp/. |
| CVE-2011-4363 | ProcessTable.pm in the Proc::ProcessTable module 0.45 for Perl, when TTY information caching is enabled, allows local users to overwrite arbitrary files via a symlink attack on /tmp/TTYDEVS. |
| CVE-2011-4328 | plugin/npapi/plugin.cpp in Gnash before 0.8.10 uses weak permissions (world readable) for cookie files with predictable names in /tmp, which allows local users to obtain sensitive information. |
| CVE-2011-4119 | caml-light <= 0.75 uses mktemp() insecurely, and also does unsafe things in /tmp during make install. |
| CVE-2011-4114 | The par_mktmpdir function in the PAR::Packer module before 1.012 for Perl creates temporary files in a directory with a predictable name without verifying ownership and permissions of this directory, which allows local users to overwrite files when another user extracts a PAR packed program. NOTE: a similar vulnerability was reported for PAR, but this has been assigned a different CVE identifier. |
| CVE-2011-3616 | The getSkillname function in the eve module in Conky 1.8.1 and earlier allows local users to overwrite arbitrary files via a symlink attack on /tmp/.cesf. |
| CVE-2011-3204 | hammerhead.cc in Hammerhead 2.1.4 allows local users to write to arbitrary files via a symlink attack on (1) /tmp/hammer.log (aka the HH_LOG file) or (2) the REPORT_LOG file. |
| CVE-2011-2722 | The send_data_to_stdout function in prnt/hpijs/hpcupsfax.cpp in HP Linux Imaging and Printing (HPLIP) 3.x before 3.11.10 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/hpcupsfax.out temporary file. |
| CVE-2011-2684 | foo2zjs before 20110722dfsg-3ubuntu1 as packaged in Ubuntu, 20110722dfsg-1 as packaged in Debian unstable, and 20090908dfsg-5.1+squeeze0 as packaged in Debian squeeze create temporary files insecurely, which allows local users to write over arbitrary files via a symlink attack on /tmp/foo2zjs. |
| CVE-2011-2533 | The configure script in D-Bus (aka DBus) 1.2.x before 1.2.28 allows local users to overwrite arbitrary files via a symlink attack on an unspecified file in /tmp/. |
| CVE-2011-2191 | Cross-site request forgery (CSRF) vulnerability in Cherokee-admin in Cherokee before 1.2.99 allows remote attackers to hijack the authentication of administrators for requests that insert cross-site scripting (XSS) sequences, as demonstrated by a crafted nickname field to vserver/apply. |
| CVE-2011-2185 | Fabric before 1.1.0 allows local users to overwrite arbitrary files via a symlink attack on (1) a /tmp/fab.*.tar file or (2) certain other files in the top level of /tmp/. |
| CVE-2011-1930 | In klibc 1.5.20 and 1.5.21, the DHCP options written by ipconfig to /tmp/net-$DEVICE.conf are not properly escaped. This may allow a remote attacker to send a specially crafted DHCP reply which could execute arbitrary code with the privileges of any process which sources DHCP options. |
| CVE-2011-1920 | The make include files in NetBSD before 1.6.2, as used in pmake 1.111 and other products, allow local users to overwrite arbitrary files via a symlink attack on a /tmp/_depend##### temporary file, related to (1) bsd.lib.mk and (2) bsd.prog.mk. |
| CVE-2011-1830 | Ekiga versions before 3.3.0 attempted to load a module from /tmp/ekiga_test.so. |
| CVE-2011-1758 | The krb5_save_ccname_done function in providers/krb5/krb5_auth.c in System Security Services Daemon (SSSD) 1.5.x before 1.5.7, when automatic ticket renewal and offline authentication are configured, uses a pathname string as a password, which allows local users to bypass Kerberos authentication by listing the /tmp directory to obtain the pathname. |
| CVE-2011-1144 | The installer in PEAR 1.9.2 and earlier allows local users to overwrite arbitrary files via a symlink attack on the package.xml file, related to the (1) download_dir, (2) cache_dir, (3) tmp_dir, and (4) pear-build-download directories. NOTE: this vulnerability exists because of an incomplete fix for CVE-2011-1072. |
| CVE-2011-1073 | crontab.c in crontab in FreeBSD and Apple Mac OS X allows local users to (1) determine the existence of arbitrary files via a symlink attack on a /tmp/crontab.XXXXXXXXXX temporary file and (2) perform MD5 checksum comparisons on arbitrary pairs of files via two symlink attacks on /tmp/crontab.XXXXXXXXXX temporary files. |
| CVE-2011-1072 | The installer in PEAR before 1.9.2 allows local users to overwrite arbitrary files via a symlink attack on the package.xml file, related to the (1) download_dir, (2) cache_dir, (3) tmp_dir, and (4) pear-build-download directories, a different vulnerability than CVE-2007-2519. |
| CVE-2011-1031 | The feh_unique_filename function in utils.c in feh 1.11.2 and earlier might allow local users to create arbitrary files via a symlink attack on a /tmp/feh_ temporary file, a different vulnerability than CVE-2011-0702. |
| CVE-2011-1011 | The seunshare_mount function in sandbox/seunshare.c in seunshare in certain Red Hat packages of policycoreutils 2.0.83 and earlier in Red Hat Enterprise Linux (RHEL) 6 and earlier, and Fedora 14 and earlier, mounts a new directory on top of /tmp without assigning root ownership and the sticky bit to this new directory, which allows local users to replace or delete arbitrary /tmp files, and consequently cause a denial of service or possibly gain privileges, by running a setuid application that relies on /tmp, as demonstrated by the ksu application. |
| CVE-2011-0949 | Cisco IOS XR 3.6.x, 3.8.x before 3.8.3, and 3.9.x before 3.9.1 does not properly remove sshd_lock files from /tmp/, which allows remote attackers to cause a denial of service (disk consumption) by making many SSHv1 connections, aka Bug ID CSCtd64417. |
| CVE-2011-0702 | The feh_unique_filename function in utils.c in feh before 1.11.2 might allow local users to overwrite arbitrary files via a symlink attack on a /tmp/feh_ temporary file. |
| CVE-2011-0401 | Piwik before 1.1 does not properly limit the number of files stored under tmp/sessions/, which might allow remote attackers to cause a denial of service (inode consumption) by establishing many sessions. |
| CVE-2011-0007 | pimd 2.1.5 and possibly earlier versions allows user-assisted local users to overwrite arbitrary files via a symlink attack on (1) pimd.dump when a USR1 signal is sent, or (2) pimd.cache when USR2 is sent. |
| CVE-2010-4337 | The configure script in gnash 0.8.8 allows local users to overwrite arbitrary files via a symlink attack on the (1) /tmp/gnash-configure-errors.$$, (2) /tmp/gnash-configure-warnings.$$, or (3) /tmp/gnash-configure-recommended.$$ files. |
| CVE-2010-4173 | The default configuration of libsdp.conf in libsdp 1.1.104 and earlier creates log files in /tmp, which allows local users to overwrite arbitrary files via a (1) symlink or (2) hard link attack on the libsdp.log.##### temporary file. |
| CVE-2010-3843 | The GTK version of ettercap uses a global settings file at /tmp/.ettercap_gtk and does not verify ownership of this file. When parsing this file for settings in gtkui_conf_read() (src/interfacesgtk/ec_gtk_conf.c), an unchecked sscanf() call allows a maliciously placed settings file to overflow a statically-sized buffer on the stack. |
| CVE-2010-3264 | The engine installer in Novell Identity Manager (aka IDM) 3.6.1 stores admin tree credentials in /tmp/idmInstall.log, which allows local users to obtain sensitive information by reading this file. |
| CVE-2010-2449 | Gource through 0.26 logs to a predictable file name (/tmp/gource-$UID.tmp), enabling attackers to overwrite an arbitrary file via a symlink attack. |
| CVE-2010-2064 | rpcbind 0.2.0 allows local users to write to arbitrary files or gain privileges via a symlink attack on (1) /tmp/portmap.xdr and (2) /tmp/rpcbind.xdr. |
| CVE-2010-2061 | rpcbind 0.2.0 does not properly validate (1) /tmp/portmap.xdr and (2) /tmp/rpcbind.xdr, which can be created by an attacker before the daemon is started. |
| CVE-2010-2027 | Mathematica 7, when running on Linux, allows local users to overwrite arbitrary files via a symlink attack on (1) files within /tmp/MathLink/ or (2) /tmp/fonts$$.conf. |
| CVE-2010-2024 | transports/appendfile.c in Exim before 4.72, when MBX locking is enabled, allows local users to change permissions of arbitrary files or create arbitrary files, and cause a denial of service or possibly gain privileges, via a symlink attack on a lockfile in /tmp/. |
| CVE-2010-1693 | openibd in OpenFabrics Enterprise Distribution (OFED) 1.5.2 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/ib_set_node_desc.sh temporary file. |
| CVE-2010-1438 | Web Application Finger Printer (WAFP) 0.01-26c3 uses fixed pathnames under /tmp for temporary files and directories, which (1) allows local users to cause a denial of service (application outage) by creating a file with a pathname that the product expects is available for its own internal use, (2) allows local users to overwrite arbitrary files via symlink attacks on certain files in /tmp, (3) might allow local users to delete arbitrary files and directories via a symlink attack on a directory under /tmp, and (4) might make it easier for local users to obtain sensitive information by reading files in a directory under /tmp, related to (a) lib/wafp_pidify.rb, (b) utils/generate_wafp_fingerprint.sh, (c) utils/online_update.sh, and (d) utils/extract_from_db.sh. |
| CVE-2010-1183 | Certain patch-installation scripts in Oracle Solaris allow local users to append data to arbitrary files via a symlink attack on the /tmp/CLEANUP temporary file, related to use of Update Manager. |
| CVE-2010-0424 | The edit_cmd function in crontab.c in (1) cronie before 1.4.4 and (2) Vixie cron (vixie-cron) allows local users to change the modification times of arbitrary files, and consequently cause a denial of service, via a symlink attack on a temporary file in the /tmp directory. |
| CVE-2010-0156 | Puppet 0.24.x before 0.24.9 and 0.25.x before 0.25.2 allows local users to overwrite arbitrary files via a symlink attack on the (1) /tmp/daemonout, (2) /tmp/puppetdoc.txt, (3) /tmp/puppetdoc.tex, or (4) /tmp/puppetdoc.aux temporary file. |
| CVE-2009-5079 | The (1) gendef.sh, (2) doc/fixinfo.sh, and (3) contrib/gdiffmk/tests/runtests.in scripts in GNU troff (aka groff) 1.21 and earlier allow local users to overwrite arbitrary files via a symlink attack on a gro#####.tmp or /tmp/##### temporary file. |
| CVE-2009-5023 | The (1) dshield.conf, (2) mail-buffered.conf, (3) mynetwatchman.conf, and (4) mynetwatchman.conf actions in action.d/ in Fail2ban before 0.8.5 allows local users to write to arbitrary files via a symlink attack on temporary files with predictable names, as demonstrated by /tmp/fail2ban-mail.txt. |
| CVE-2009-4193 | Merkaartor 0.14 allows local users to append data to arbitrary files via a symlink attack on the /tmp/merkaartor.log temporary file. |
| CVE-2009-4140 | Unrestricted file upload vulnerability in ofc_upload_image.php in Open Flash Chart v2 Beta 1 through v2 Lug Wyrm Charmer, as used in Piwik 0.2.35 through 0.4.3, Woopra Analytics Plugin before 1.4.3.2, and possibly other products, when register_globals is enabled, allows remote authenticated users to execute arbitrary code by uploading a file with an executable extension through the name parameter with the code in the HTTP_RAW_POST_DATA parameter, then accessing it via a direct request to the file in tmp-upload-images/. |
| CVE-2009-4135 | The distcheck rule in dist-check.mk in GNU coreutils 5.2.1 through 8.1 allows local users to gain privileges via a symlink attack on a file in a directory tree under /tmp. |
| CVE-2009-3274 | Mozilla Firefox 3.6a1, 3.5.3, 3.5.2, and earlier 3.5.x versions, and 3.0.14 and earlier 2.x and 3.x versions, on Linux uses a predictable /tmp pathname for files selected from the Downloads window, which allows local users to replace an arbitrary downloaded file by placing a file in a /tmp location before the download occurs, related to the Download Manager component. NOTE: some of these details are obtained from third party information. |
| CVE-2009-1962 | Xfig, possibly 3.2.5, allows local users to read and write arbitrary files via a symlink attack on the (1) xfig-eps[PID], (2) xfig-pic[PID].pix, (3) xfig-pic[PID].err, (4) xfig-pcx[PID].pix, (5) xfig-xfigrc[PID], (6) xfig[PID], (7) xfig-print[PID], (8) xfig-export[PID].err, (9) xfig-batch[PID], (10) xfig-exp[PID], or (11) xfig-spell.[PID] temporary files, where [PID] is a process ID. |
| CVE-2009-1299 | The pa_make_secure_dir function in core-util.c in PulseAudio 0.9.10 and 0.9.19 allows local users to change the ownership and permissions of arbitrary files via a symlink attack on a /tmp/.esd-##### temporary file. |
| CVE-2009-1215 | Race condition in GNU screen 4.0.3 allows local users to create or overwrite arbitrary files via a symlink attack on the /tmp/screen-exchange temporary file. |
| CVE-2009-1214 | GNU screen 4.0.3 creates the /tmp/screen-exchange temporary file with world-readable permissions, which might allow local users to obtain sensitive session information. |
| CVE-2009-1142 | An issue was discovered in open-vm-tools 2009.03.18-154848. Local users can gain privileges via a symlink attack on /tmp files if vmware-user-suid-wrapper is setuid root and the ChmodChownDirectory function is enabled. |
| CVE-2009-0842 | mapserv in MapServer 4.x before 4.10.4 and 5.x before 5.2.2 allows remote attackers to read arbitrary invalid .map files via a full pathname in the map parameter, which triggers the display of partial file contents within an error message, as demonstrated by a /tmp/sekrut.map symlink. |
| CVE-2009-0416 | The SSL certificate setup program (genSslCert.sh) in Standards Based Linux Instrumentation for Manageability (SBLIM) sblim-sfcb 1.3.2 allows local users to overwrite arbitrary files via a symlink attack on the (1) /var/tmp/key.pem, (2) /var/tmp/cert.pem, and (3) /var/tmp/ssl.cnf temporary files. |
| CVE-2009-0390 | Argument injection vulnerability in Enomaly Elastic Computing Platform (ECP), formerly Enomalism, before 2.1.1 allows local users to send signals to arbitrary processes by populating the /tmp/enomalism2.pid file with command-line arguments for the kill program. |
| CVE-2009-0032 | CUPS on Mandriva Linux 2008.0, 2008.1, 2009.0, Corporate Server (CS) 3.0 and 4.0, and Multi Network Firewall (MNF) 2.0 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/pdf.log temporary file. |
| CVE-2008-7276 | Kernel/System/Web/Request.pm in Open Ticket Request System (OTRS) before 2.3.2 creates a directory under /tmp/ with 1274 permissions, which might allow local users to bypass intended access restrictions via standard filesystem operations, related to incorrect interpretation of 0700 as a decimal value. |
| CVE-2008-7215 | The Image Manager in MOStlyCE before 2.4, as used in Mambo 4.6.3 and earlier, allows remote attackers to rename arbitrary files and cause a denial of service via modified file[NewFile][name], file[NewFile][tmp_name], and file[NewFile][size] parameters in a FileUpload command, which are used to modify equivalent variables in $_FILES that are accessed when the is_uploaded_file check fails. |
| CVE-2008-7042 | PHP remote file inclusion vulnerability in url.php in FreshScripts Fresh Email Script 1.0 through 1.11 allows remote attackers to execute arbitrary PHP code via a URL in the tmp_sid parameter. |
| CVE-2008-6599 | cookiecheck.php in CookieCheck 1.0 stores tmp/cc_sessions under the web root with insufficient access control, which allows remote attackers to obtain session data via a direct request related to the "default session save path." |
| CVE-2008-6552 | Red Hat Cluster Project 2.x allows local users to modify or overwrite arbitrary files via symlink attacks on files in /tmp, involving unspecified components in Resource Group Manager (aka rgmanager) before 2.03.09-1, gfs2-utils before 2.03.09-1, and CMAN - The Cluster Manager before 2.03.09-1 on Fedora 9. |
| CVE-2008-6398 | sng_regress in SNG 1.0.2 allows local users to overwrite arbitrary files via a symlink attack on the (1) /tmp/recompiled$$.png, (2) /tmp/decompiled$$.sng, and (3) /tmp/canonicalized$$.sng temporary files. |
| CVE-2008-5843 | Multiple untrusted search path vulnerabilities in pdfjam allow local users to gain privileges via a Trojan horse program in (1) the current working directory or (2) /var/tmp, related to the (a) pdf90, (b) pdfjoin, and (c) pdfnup scripts. |
| CVE-2008-5706 | The cTrigger::DoIt function in src/ctrigger.cpp in the trigger mechanism in the daemon in Verlihub 0.9.8d-RC2 and earlier allows local users to overwrite arbitrary files via a symlink attack on the /tmp/trigger.tmp temporary file. |
| CVE-2008-5704 | src/unit_test.c in gpsdrive (aka gpsdrive-scripts) 2.10~pre4 might allow local users to overwrite arbitrary files via a symlink attack on the /tmp/gpsdrive-unit-test/proc temporary file, a different vector than CVE-2008-4959 and CVE-2008-5380. |
| CVE-2008-5703 | gpsdrive (aka gpsdrive-scripts) 2.10~pre4 allows local users to overwrite arbitrary files via a symlink attack on the (a) /tmp/.smswatch or (b) /tmp/gpsdrivepos temporary file, related to (1) examples/gpssmswatch and (2) src/splash.c, different vectors than CVE-2008-4959 and CVE-2008-5380. |
| CVE-2008-5380 | gpsdrive (aka gpsdrive-scripts) 2.09 allows local users to overwrite arbitrary files via a symlink attack on an (a) /tmp/geo#####, a (b) /tmp/geocaching.loc, a (c) /tmp/geo#####.*, or a (d) /tmp/geo.* temporary file, related to the (1) geo-code and (2) geo-nearest scripts, different vectors than CVE-2008-4959. |
| CVE-2008-5379 | netdisco-mibs-installer 1.0 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/netdisco-mibs-0.6.tar.gz temporary file, related to the (1) netdisco-mibs-install and (2) netdisco-mibs-download scripts. |
| CVE-2008-5378 | arb-kill in arb 0.0.20071207.1 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/arb_pids_*_* temporary file. |
| CVE-2008-5377 | pstopdf in CUPS 1.3.8 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/pstopdf.log temporary file, a different vulnerability than CVE-2001-1333. |
| CVE-2008-5376 | editcomment in crip 3.7 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/*.tag.tmp temporary file. |
| CVE-2008-5375 | cmus-status-display in cmus 2.2.0 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/cmus-status temporary file. |
| CVE-2008-5374 | bash-doc 3.2 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/cb#####.? temporary file, related to the (1) aliasconv.sh, (2) aliasconv.bash, and (3) cshtobash scripts. |
| CVE-2008-5373 | mtx-changer.Adic-Scalar-24 in bacula-common 2.4.2 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/mtx.##### temporary file, probably a related issue to CVE-2005-2995. |
| CVE-2008-5372 | sdm-login in sdm-terminal 0.4.0b allows local users to overwrite arbitrary files via a symlink attack on the /tmp/sdm.autologin.once temporary file. |
| CVE-2008-5371 | screenie in screenie 1.30.0 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/.screenie.##### temporary file. |
| CVE-2008-5370 | pvpgn-support-installer in pvpgn 1.8.1 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/pvpgn-support-1.0.tar.gz temporary file. |
| CVE-2008-5369 | noip2 in noip2 2.1.7 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/noip2 temporary file. |
| CVE-2008-5368 | muttprint in muttprint 0.72d allows local users to overwrite arbitrary files via a symlink attack on the /tmp/muttprint.log temporary file. |
| CVE-2008-5367 | ip-up in ppp-udeb 2.4.4rel on Debian GNU/Linux allows local users to overwrite arbitrary files via a symlink attack on the /tmp/resolv.conf.tmp temporary file. |
| CVE-2008-5366 | The postinst script in ppp 2.4.4rel on Debian GNU/Linux allows local users to overwrite arbitrary files via a symlink attack on the (1) /tmp/probe-finished or (2) /tmp/ppp-errors temporary file. |
| CVE-2008-5299 | chm2pdf 0.9 allows user-assisted local users to delete arbitrary files via a symlink attack on .chm files in the (1) /tmp/chm2pdf/work or (2) /tmp/chm2pdf/orig temporary directories. |
| CVE-2008-5256 | The AcquireDaemonLock function in ipcdUnix.cpp in Sun Innotek VirtualBox before 2.0.6 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/.vbox-$USER-ipc/lock temporary file. |
| CVE-2008-5220 | Unrestricted file upload vulnerability in admin/upload_form.php in wPortfolio 0.3 and earlier allows remote attackers to execute arbitrary code by uploading a file with an executable extension, then accessing it via a direct request to the file in admin/tmp/. |
| CVE-2008-5157 | tau 2.16.4 allows local users to overwrite arbitrary files via a symlink attack on a (1) /tmp/makefile.tau.*.##### or (2) /tmp/makefile.tau*.##### temporary file, related to the (a) tau_cxx, (b) tau_f90, and (c) tau_cc scripts. |
| CVE-2008-5156 | si_mkbootserver in systemimager-server 3.6.3 allows local users to overwrite arbitrary files via a symlink attack on a (1) /tmp/*.inetd.conf or (2) /tmp/pxe.conf.*.tmp temporary file. |
| CVE-2008-5155 | mail2sms.sh in smsclient 2.0.8z allows local users to overwrite arbitrary files via a symlink attack on a (1) /tmp/header.##### or (2) /tmp/body.##### temporary file, or append data to arbitrary files via a symlink attack on the (3) /tmp/sms.log temporary file. |
| CVE-2008-5154 | bluetooth.rc in p3nfs 5.19 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/blue.log temporary file. |
| CVE-2008-5153 | spell-check-logic.cgi in Moodle 1.8.2 allows local users to overwrite arbitrary files via a symlink attack on the (1) /tmp/spell-check-debug.log, (2) /tmp/spell-check-before, or (3) /tmp/spell-check-after temporary file. |
| CVE-2008-5152 | inmail-show in mh-book 200605 allows local users to overwrite arbitrary files via a symlink attack on a (1) /tmp/inmail#####.log or (2) /tmp/inmail#####.stdin temporary file. |
| CVE-2008-5151 | test_parser.py in mayavi 1.5 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/err.log temporary file. |
| CVE-2008-5150 | sample.sh in maildirsync 1.1 allows local users to append data to arbitrary files via a symlink attack on a /tmp/maildirsync-*.#####.log temporary file. |
| CVE-2008-5149 | fwd_check.sh in libncbi6 6.1.20080302 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/##### temporary file. |
| CVE-2008-5148 | sch2eaglepos.sh in geda-gnetlist 1.4.0 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/##### temporary file. |
| CVE-2008-5147 | test-pipe-to-pyodconverter.org.sh in docvert 2.4 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/outer.odt temporary file. |
| CVE-2008-5146 | add-accession-numbers in ctn 3.0.6 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/accession temporary file. |
| CVE-2008-5145 | ltpmenu in ltp 20060918 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/runltp.mainmenu.##### temporary file. |
| CVE-2008-5144 | nvidia-cg-toolkit-installer in nvidia-cg-toolkit 2.0.0015 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/nvidia-cg-toolkit-manifest temporary file. |
| CVE-2008-5143 | mgt-helper in multi-gnome-terminal 1.6.2 allows local users to overwrite arbitrary files via a symlink attack on a (1) /tmp/*.debug or (2) /tmp/*.env temporary file. |
| CVE-2008-5142 | sendbug in freebsd-sendpr 3.113+5.3 on Debian GNU/Linux allows local users to overwrite arbitrary files via a symlink attack on a /tmp/pr.##### temporary file. |
| CVE-2008-5141 | flamethrower in flamethrower 0.1.8 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/multicast.tar.##### temporary file. |
| CVE-2008-5140 | trend-autoupdate.new in mailscanner 4.55.10 and other versions before 4.74.16-1 allows local users to overwrite arbitrary files via a symlink attack on a (1) /tmp/opr.ini.##### or (2) /tmp/lpt*.zip temporary file. |
| CVE-2008-5139 | updatejail in jailer 0.4 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/#####.updatejail temporary file. |
| CVE-2008-5138 | passwdehd in libpam-mount 0.43 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/passwdehd.##### temporary file. |
| CVE-2008-5137 | tkman in tkman 2.2 allows local users to overwrite arbitrary files via a symlink attack on a (1) /tmp/tkman##### or (2) /tmp/ll temporary file. |
| CVE-2008-5136 | tkusr in tkusr 0.82 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/tkusr.pgm temporary file. |
| CVE-2008-5135 | ** DISPUTED ** os-prober in os-prober 1.17 allows local users to overwrite arbitrary files via a symlink attack on the (1) /tmp/mounted-map or (2) /tmp/raided-map temporary file. NOTE: the vendor disputes this issue, stating "the insecure code path should only ever run inside a d-i environment, which has no non-root users." |
| CVE-2008-5034 | ** DISPUTED ** master-filter in printfilters-ppd 2.13 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/filter.debug temporary file. NOTE: the vendor disputes this vulnerability, stating 'this package does not have " possibility of attack with the help of symlinks"'. |
| CVE-2008-5007 | create_lazarus_export_tgz.sh in lazarus 0.9.24 allows local users to overwrite or delete arbitrary files via a symlink attack on a (1) /tmp/lazarus.tgz temporary file or a (2) /tmp/lazarus temporary directory. |
| CVE-2008-4998 | ** DISPUTED ** postinst in twiki 4.1.2 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/twiki temporary file. NOTE: the vendor disputes this vulnerability, stating "this bug is invalid." |
| CVE-2008-4997 | ** DISPUTED ** dfxml-invoice in datafreedom-perl 0.1.7 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/zenity temporary file. NOTE: the vendor disputes this vulnerability, stating that the vector is solely "an EXAMPLE used in the manpage." |
| CVE-2008-4996 | ** DISPUTED ** init in initramfs-tools 0.92f allows local users to overwrite arbitrary files via a symlink attack on the /tmp/initramfs.debug temporary file. NOTE: the vendor disputes this vulnerability, stating that "init is [used in] a single-user context; there's no possibility that this is exploitable." |
| CVE-2008-4995 | redirect.pl in bk2site 1.1.9 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/redirect.log temporary file. NOTE: this vulnerability is only limited to debug mode, which is disabled by default. |
| CVE-2008-4994 | The (1) ncsarmt and (2) ncsawrap scripts in xmcd 2.6 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/Mosaic.*pid temporary file. |
| CVE-2008-4993 | qemu-dm.debug in Xen 3.2.1 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/args temporary file. |
| CVE-2008-4990 | Enomaly Elastic Computing Platform (ECP), formerly Enomalism, before 2.1.1 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/enomalism2.pid temporary file. |
| CVE-2008-4988 | pscal in xcal 4.1 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/pscal##### temporary file. |
| CVE-2008-4987 | xastir 1.9.2 allows local users to overwrite arbitrary files via a symlink attack on the (a) /tmp/ldconfig.tmp, (b) /tmp/ldconf.tmp, and (c) /tmp/ld.so.conf temporary files, related to the (1) get-maptools.sh and (2) get_shapelib.sh scripts. |
| CVE-2008-4986 | wims 3.62 allows local users to overwrite arbitrary files via a symlink attack on (a) /tmp/env#####, (b) /tmp/sed#####, and (c) /tmp/referer-home.log temporary files, related to the (1) coqweb and (2) account.sh scripts. |
| CVE-2008-4985 | vdrleaktest in Video Disk Recorder (aka vdr-dbg or vdr) 1.6.0 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/memleaktest.log temporary file. |
| CVE-2008-4984 | scratchbox2 1.99.0.24 allows local users to overwrite arbitrary files via a symlink attack on (a) /tmp/dpkg.#####.tmp, (b) /tmp/missing_deps.#####, and (c) /tmp/sb2-pkg-chk.$tstamp.##### temporary files, related to the (1) dpkg-checkbuilddeps and (2) sb2-check-pkg-mappings scripts. |
| CVE-2008-4983 | scilab-bin 4.1.2 allows local users to overwrite arbitrary files via a symlink attack on (a) /tmp/SciLink#####1, (b) /tmp/SciLink#####2, (c) /tmp/SciLink#####3, (d) /tmp/*.#####, (e) /tmp/*.#####.res, (f) /tmp/*.#####.err, and (g) /tmp/*.#####.diff temporary files, related to the (1) scilink, (2) scidoc, and (3) scidem scripts. |
| CVE-2008-4982 | rkhunter in rkhunter 1.3.2 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/rkhunter-debug temporary file. NOTE: this is probably a different vulnerability than CVE-2005-1270. |
| CVE-2008-4981 | perl.robot in realtimebattle 1.0.8 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/perl.robot.log temporary file. |
| CVE-2008-4980 | delqueueask in rccp 0.9 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/cccp_tmp.txt temporary file. |
| CVE-2008-4979 | getipacctg in rancid 2.3.2~a8 allows local users to overwrite arbitrary files via a symlink attack on (1) /tmp/ipacct.#####.prefixes, (2) /tmp/ipacct.#####.sorted, (3) /tmp/ipacct.#####.pl, and (4) /tmp/ipacct.##### temporary files. |
| CVE-2008-4978 | radiance 3R9+20080530 allows local users to overwrite arbitrary files via a symlink attack on (a) /tmp/opt.fmt, (b) /tmp/out#####.fmt, (c) /tmp/tf#####.dat, (d) /tmp/gsf#####, (e) /tmp/sc#####.sh, (f) /tmp/il#####.pic, (g) /tmp/tl#####.pic, (h) /tmp/ds#####.pic, (i) /tmp/tfa#####, and (j) /tmp/sed##### temporary files, related to the (1) optics2rad, (2) pdelta, (3) dayfact, and (4) raddepend scripts. |
| CVE-2008-4977 | ** DISPUTED ** postfix_groups.pl in Postfix 2.5.2 allows local users to overwrite arbitrary files via a symlink attack on the (1) /tmp/postfix_groups.stdout, (2) /tmp/postfix_groups.stderr, and (3) /tmp/postfix_groups.message temporary files. NOTE: the vendor disputes this vulnerability, stating "This is not a real issue ... users would have to edit a script under /usr/lib to enable it." |
| CVE-2008-4976 | ogle 0.9.2 and ogle-mmx 0.9.2 allow local users to overwrite arbitrary files via a symlink attack on (a) /tmp/ogle_audio.#####, (b) /tmp/ogle_cli.#####, (c) /tmp/ogle_ctrl.#####, (d) /tmp/ogle_gui.#####, (e) /tmp/ogle_mpeg_ps.#####, (f) /tmp/ogle_mpeg_vs.#####, (g) /tmp/ogle_nav.#####, and (h) /tmp/ogle_vout.#####, temporary files, related to the (1) ogle_audio_debug, (2) ogle_cli_debug, (3) ogle_ctrl_debug, (4) ogle_gui_debug, (5) ogle_mpeg_ps_debug, (6) ogle_mpeg_vs_debug, (7) ogle_nav_debug, and (8) ogle_vout_debug scripts. |
| CVE-2008-4975 | mkmailpost in newsgate 1.6 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/mmp##### temporary file. |
| CVE-2008-4974 | rrdedit in netmrg 0.20 allows local users to overwrite arbitrary files via a symlink attack on (1) /tmp/*.xml and (2) /tmp/*.backup temporary files. |
| CVE-2008-4973 | i2myspell in myspell 3.1 allows local users to overwrite arbitrary files via a symlink attack on (1) /tmp/i2my#####.1 and (2) /tmp/i2my#####.2 temporary files. |
| CVE-2008-4972 | mailgo in mgt 2.31 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/mailgo##### temporary file. |
| CVE-2008-4971 | mafft-homologs in mafft 6.240 allows local users to overwrite arbitrary files via a symlink attack on (1) /tmp/_vf#?????, (2) /tmp/_if#?????, (3) /tmp/_pf#?????, (4) /tmp/_af#?????, (5) /tmp/_rid#?????, (6) /tmp/_res#?????, (7) /tmp/_q#?????, and (8) /tmp/_bf#????? temporary files. |
| CVE-2008-4970 | runiozone in lustre 1.6.5 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/iozone.log temporary file. |
| CVE-2008-4969 | ltp-network-test 20060918 allows local users to overwrite arbitrary files via a symlink attack on (a) /tmp/vsftpd.conf, (b) /tmp/udp/2/*, (c) /tmp/tcp/2/*, (d) /tmp/udp/3/*, (e) /tmp/tcp/3/*, (f) /tmp/nfs_fsstress.udp.2.log, (g) /tmp/nfs_fsstress.udp.3.log, (h) /tmp/nfs_fsstress.tcp.2.log, (i) /tmp/nfs_fsstress.tcp.3.log, and (j) /tmp/nfs_fsstress.sardata temporary files, related to the (1) ftp_setup_vsftp_conf and (2) nfs_fsstress.sh scripts. |
| CVE-2008-4968 | The (1) rccs and (2) STUFF scripts in lmbench 3.0-a7 allow local users to overwrite arbitrary files via a symlink attack on a /tmp/sdiff.##### temporary file. |
| CVE-2008-4967 | linuxtrade 3.65 allows local users to overwrite arbitrary files via a symlink attack on the (a) /tmp/bwk, (b) /tmp/zzz, and (c) /tmp/ggg temporary files, related to the (1) linuxtrade.bwkvol, (2) linuxtrade.wn, and (3) moneyam.helper scripts. |
| CVE-2008-4966 | linux-patch-openswan 2.4.12 allows local users to overwrite arbitrary files via a symlink attack on (a) /tmp/snap##### and (b) /tmp/nightly##### temporary files, related to the (1) maysnap and (2) maytest scripts. |
| CVE-2008-4965 | liguidsoap.py in liguidsoap 0.3.8.1+2 allows local users to overwrite arbitrary files via a symlink attack on (1) /tmp/liguidsoap.liq, (2) /tmp/lig.#####.log, and (3) /tmp/emission.ogg temporary files. |
| CVE-2008-4964 | filters/any-UTF8 in konwert 1.8 allows local users to delete arbitrary files via a symlink attack on a /tmp/any-##### temporary file. |
| CVE-2008-4960 | impose in impose+ 0.2 allows local users to overwrite arbitrary files via a symlink attack on (1) /tmp/*-tmp.ps and (2) /tmp/bboxx-* temporary files. |
| CVE-2008-4959 | geo-code in gpsdrive-scripts 2.10~pre4 allows local users to overwrite arbitrary files via a symlink attack on (1) /tmp/geo.google, (2) /tmp/geo.yahoo, (3) /tmp/geo.coords, and (4) /tmp/geo#####.coords temporary files. |
| CVE-2008-4958 | gdrae in gdrae 0.1 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/gdrae/palabra temporary file. |
| CVE-2008-4957 | find_flags in Kitware GCC-XML (gccxml) 0.9.0 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/*.cxx temporary file. |
| CVE-2008-4956 | fwb_install in fwbuilder 2.1.19 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/ssh-agent.##### temporary file. |
| CVE-2008-4955 | freevo.real in freevo 1.8.1 allows local users to overwrite arbitrary files via a symlink attack on (1) /tmp/*-#####.pid, (2) /tmp/freevo-gdb, (3) /tmp/freevo-gdb.sh, and (4) /tmp/*.stats temporary files. NOTE: this issue is only a vulnerability when a verbose debug mode is activated by modifying source code. |
| CVE-2008-4954 | mead.pl in fml 4.0.3 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/debugbuf temporary file. |
| CVE-2008-4953 | ** DISPUTED ** firehol in firehol 1.256 allows local users to overwrite arbitrary files via a symlink attack on (1) /tmp/.firehol-tmp-#####-*-* and (2) /tmp/firehol.conf temporary files. NOTE: the vendor disputes this vulnerability, stating that an attack "would require an attacker to create 1073741824*PID-RANGE symlinks." |
| CVE-2008-4952 | emacs-jabber in emacs-jabber 0.7.91 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/*.log temporary file. |
| CVE-2008-4951 | dtc 0.29.6 allows local users to overwrite arbitrary files via a symlink attack on (a) /tmp/awstats.log, (b) /tmp/spam.log.#####, and (c) /tmp/spam_err.log temporary files, related to the (1) accesslog.php and (2) sa-wrapper scripts. |
| CVE-2008-4950 | ** DISPUTED ** gccross in dpkg-cross 2.3.0 allows local users to overwrite arbitrary files via a symlink attack on the tmp/gccross2.log temporary file. NOTE: the vendor disputes this vulnerability, stating that "There is no sense in this bug - the script ... is called under specific cross-building environments within a chroot." |
| CVE-2008-4949 | dist 3.5 allows local users to overwrite arbitrary files via a symlink attack on (a) /tmp/cil#####, (b) /tmp/pdo#####, and (c) /tmp/pdn##### temporary files, related to the (1) patcil and (2) patdiff scripts. |
| CVE-2008-4948 | fest.pl in digitaldj 0.7.5 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/ddj_fest.tmp temporary file. |
| CVE-2008-4947 | dhis-dummy-log-engine in dhis-server 5.3 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/dhis-dummy-log-engine.log temporary file. |
| CVE-2008-4946 | convirt 0.8.2 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/set_output temporary file, related to the (1) _template_/provision.sh, (2) Linux_CD_Install/provision.sh, (3) Fedora_PV_Install/provision.sh, (4) CentOS_PV_Install/provision.sh, (5) common/provision.sh, (6) example/provision.sh, and (7) Windows_CD_Install/provision.sh scripts in image_store/. |
| CVE-2008-4945 | amlabel-cdrw in cdrw-taper 0.4 might allow local users to overwrite arbitrary files via a symlink attack involving a /tmp/amlabel-cdrw.##### temporary directory. |
| CVE-2008-4944 | writtercontrol in cdcontrol 1.90 allows local users to overwrite arbitrary files via a symlink attack on /tmp/v-recorder*-out temporary files. |
| CVE-2008-4943 | bulmages-servers 0.11.1 allows local users to overwrite arbitrary files via a symlink attack on the (a) /tmp/error.txt, (b) /tmp/errores.txt, and possibly other temporary files, related to the (1) creabulmafact, (2) creabulmacont, and possibly (3) actualizabulmacont, (4) installbulmages-db, and (5) actualizabulmafact scripts. |
| CVE-2008-4942 | audiolink in audiolink 0.05 allows local users to overwrite arbitrary files via a symlink attack on the (1) /tmp/audiolink.db.tmp and (2) /tmp/audiolink.tb.tmp temporary files. |
| CVE-2008-4941 | arb-common 0.0.20071207.1 allows local users to overwrite arbitrary files via a symlink attack on (a) /tmp/arb_fdnaml_*, (b) /tmp/arb_pids_*, (c) /tmp/arbdsmz.html, and (d) /tmp/arbdsmz.htm temporary files, related to the (1) arb_fastdnaml and (2) dszmconnect.pl scripts. |
| CVE-2008-4940 | xmlfile.py in aptoncd 0.1 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/aptoncd temporary file. |
| CVE-2008-4939 | apertium 3.0.7 allows local users to overwrite arbitrary files via a symlink attack on (a) /tmp/#####.lex.cc, (b) /tmp/#####.deformat.l, (c) /tmp/#####.reformat.l, (d) /tmp/#####docxorig, (e) /tmp/#####docxsalida.zip, (f) /tmp/#####xlsxembed, (g) /tmp/#####xlsxorig, and (h) /tmp/#####xslxsalida.zip temporary files, related to the (1) apertium-gen-deformat, (2) apertium-gen-reformat, and (3) apertium scripts. |
| CVE-2008-4938 | aegis 4.24 and aegis-web 4.24 allow local users to overwrite arbitrary files via a symlink attack on (a) /tmp/#####, (b) /tmp/#####.intro, (c) /tmp/aegis.#####.ae, (d) /tmp/aegis.#####, (e) /tmp/aegis.#####.1, (f) /tmp/aegis.#####.2, (g) /tmp/aegis.#####.log, and (h) /tmp/aegis.#####.out temporary files, related to the (1) bng_dvlpd.sh, (2) bng_rvwd.sh, (3) awt_dvlp.sh, (4) awt_intgrtn.sh, and (5) aegis.cgi scripts. |
| CVE-2008-4937 | senddoc in OpenOffice.org (OOo) 2.4.1 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/log.obr.##### temporary file. |
| CVE-2008-4936 | faxspool in mgetty 1.1.36 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/faxsp.##### temporary file. |
| CVE-2008-4935 | asciiview in aview 1.3.0 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/aview#####.pgm temporary file. |
| CVE-2008-4476 | sympa.pl in sympa 5.3.4 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/sympa_aliases.$$ temporary file. NOTE: wwsympa.fcgi was also reported, but the issue occurred in a dead function, so it is not a vulnerability. |
| CVE-2008-4440 | The to-upgrade plugin in feta 1.4.16 allows local users to overwrite arbitrary files via a symlink on the (1) /tmp/feta.install.$USER and (2) /tmp/feta.avail.$USER temporary files. |
| CVE-2008-4407 | XRunSabre in sabre (aka xsabre) 0.2.4b relies on the ability to create /tmp/sabre.log, which allows local users to cause a denial of service (application unavailability) by creating a /tmp/sabre.log file that cannot be overwritten. |
| CVE-2008-4406 | A certain Debian patch to the run scripts for sabre (aka xsabre) 0.2.4b allows local users to delete or overwrite arbitrary files via a symlink attack on unspecified .tmp files. |
| CVE-2008-4192 | The pserver_shutdown function in fence_egenera in cman 2.20080629 and 2.20080801 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/eglog temporary file. |
| CVE-2008-4108 | Tools/faqwiz/move-faqwiz.sh (aka the generic FAQ wizard moving tool) in Python 2.4.5 might allow local users to overwrite arbitrary files via a symlink attack on a tmp$RANDOM.tmp temporary file. NOTE: there may not be common usage scenarios in which tmp$RANDOM.tmp is located in an untrusted directory. |
| CVE-2008-4085 | plaiter in Plait before 1.6 allows local users to overwrite arbitrary files via a symlink attack on (1) cut.$$, (2) head.$$, (3) awk.$$, and (4) ps.$$ temporary files in /tmp/. |
| CVE-2008-3929 | gather-messages.sh in Ampache 3.4.1 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/filelist temporary file. |
| CVE-2008-3883 | configvar in Caudium 1.4.12 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/roken#####.pike temporary file. |
| CVE-2008-3791 | src/main-win.c in GPicView 0.1.9 in Lightweight X11 Desktop Environment (LXDE) allows local users to overwrite arbitrary files via a symlink attack on the /tmp/rot.jpg temporary file. |
| CVE-2008-2216 | Unrestricted file upload vulnerability in src/yopy_upload.php in Project-Based Calendaring System (PBCS) 0.7.1 allows remote authenticated users to upload arbitrary files to tmp/uploads. |
| CVE-2008-1951 | Untrusted search path vulnerability in a certain Red Hat build script for Standards Based Linux Instrumentation for Manageability (sblim) libraries before 1-13a.el4_6.1 in Red Hat Enterprise Linux (RHEL) 4, and before 1-31.el5_2.1 in RHEL 5, allows local users to gain privileges via a malicious library in a certain subdirectory of /var/tmp, related to an incorrect RPATH setting, as demonstrated by a malicious libc.so library for tog-pegasus. |
| CVE-2008-1684 | inetd on Sun Solaris 10, when debug logging is enabled, allows local users to write to arbitrary files via a symlink attack on the /var/tmp/inetd.log temporary file. |
| CVE-2008-1635 | Directory traversal vulnerability in view_private.php in Keep It Simple Guest Book (KISGB) 5.0.0 and earlier allows remote attackers to include and execute arbitrary local files via a .. (dot dot) in the tmp_theme parameter. NOTE: 5.1.1 is also reportedly affected. |
| CVE-2008-1633 | Unspecified vulnerability in Mondo Rescue before 2.2.5 has unknown impact and attack vectors, related to the use of (1) /tmp and (2) MINDI_CACHE. |
| CVE-2008-1567 | phpMyAdmin before 2.11.5.1 stores the MySQL (1) username and (2) password, and the (3) Blowfish secret key, in cleartext in a Session file under /tmp, which allows local users to obtain sensitive information. |
| CVE-2008-0806 | wyrd 1.4.3b allows local users to overwrite arbitrary files via a symlink attack on the wyrd-tmp.[USERID] temporary file. |
| CVE-2008-0666 | Website META Language (WML) 2.0.11 allows local users to overwrite arbitrary files via a symlink attack on (1) the /tmp/pe.tmp.$$ temporary file used by wml_contrib/wmg.cgi and (2) temporary files used by wml_backend/p3_eperl/eperl_sys.c. |
| CVE-2008-0525 | PatchLink Update client for Unix, as used by Novell ZENworks Patch Management Update Agent for Linux/Unix/Mac (LUM) 6.2094 through 6.4102 and other products, allows local users to (1) truncate arbitrary files via a symlink attack on the /tmp/patchlink.tmp file used by the logtrimmer script, and (2) execute arbitrary code via a symlink attack on the /tmp/plshutdown file used by the rebootTask script. |
| CVE-2007-6470 | phpRPG 0.8 stores sensitive information under the web root with insufficient access control, which allows remote attackers to read session ID values in files under tmp/, and then hijack sessions via PHPSESSID cookies. |
| CVE-2007-6358 | pdftops.pl before 1.20 in alternate pdftops filter allows local users to overwrite arbitrary files via a symlink attack on the pdfin.[PID].tmp temporary file, which is created when pdftops reads a PDF file from stdin, such as when pdftops is invoked by CUPS. |
| CVE-2007-5718 | vobcopy 0.5.14 allows local users to append data to an arbitrary file, or create an arbitrary new file, via a symlink attack on the (1) /tmp/vobcopy.bla or (2) /tmp/vobcopy_0.5.14.log temporary file. |
| CVE-2007-5289 | HP Mercury Quality Center (QC) 9.2 and earlier, and possibly TestDirector, relies on cached client-side scripts to implement "workflow" and decisions about the "capability" of a user, which allows remote attackers to execute arbitrary code via crafted use of the Open Test Architecture (OTA) API, as demonstrated by modifying (1) common.tds, (2) defects.tds, (3) manrun.tds, (4) req.tds, (5) testlab.tds, or (6) testplan.tds in %tmp%\TD_80, and then setting the file's properties to read-only. |
| CVE-2007-4781 | administrator/index.php in the installer component (com_installer) in Joomla! 1.5 Beta1, Beta2, and RC1 allows remote authenticated administrators to upload arbitrary files to tmp/ via the "Upload Package File" functionality, which is accessible when com_installer is the value of the option parameter. |
| CVE-2007-4271 | Directory traversal vulnerability in IBM DB2 UDB 8 before Fixpak 15 and 9.1 before Fixpak 3 allows local users to create arbitrary files via a .. (dot dot) in an unspecified environment variable, which is appended to "/tmp/" and used as a log file. NOTE: this issue might be related to symlink following. |
| CVE-2007-4129 | CoolKey 1.1.0 allows local users to overwrite arbitrary files via a symlink attack on temporary files in the /tmp/.pk11ipc1/ directory. |
| CVE-2007-3919 | (1) xenbaked and (2) xenmon.py in Xen 3.1 and earlier allow local users to truncate arbitrary files via a symlink attack on /tmp/xenq-shm. |
| CVE-2007-3852 | The init script (sysstat.in) in sysstat 5.1.2 up to 7.1.6 creates /tmp/sysstat.run insecurely, which allows local users to execute arbitrary code. |
| CVE-2007-3531 | The set_default_speeds function in backend/backend.c in NVidia NVClock before 0.8b2 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/nvclock temporary file. |
| CVE-2007-3103 | The init.d script for the X.Org X11 xfs font server on various Linux distributions might allow local users to change the permissions of arbitrary files via a symlink attack on the /tmp/.font-unix temporary file. |
| CVE-2007-2838 | The populate_conns function in src/populate_conns.c in GSAMBAD 0.1.4 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/gsambadtmp temporary file. |
| CVE-2007-2837 | The (1) getRule and (2) getChains functions in server/rules.cpp in fireflierd (fireflier-server) in FireFlier 1.1.6 allow local users to overwrite arbitrary files via a symlink attack on the /tmp/fireflier.rules temporary file. |
| CVE-2007-1634 | Variable extraction vulnerability in grab_globals.php in Net Portal Dynamic System (NPDS) 5.10 and earlier allows remote attackers to conduct SQL injection attacks via the _FILES[DB][tmp_name] parameter to print.php, which overwrites the $DB variable with dynamic variable evaluation. |
| CVE-2007-1500 | The Linux Security Auditing Tool (LSAT) allows local users to overwrite arbitrary files via a symlink attack on temporary files, as demonstrated using /tmp/lsat1.lsat. |
| CVE-2007-1444 | netserver in netperf 2.4.3 allows local users to overwrite arbitrary files via a symlink attack on /tmp/netperf.debug. |
| CVE-2007-1150 | Unrestricted file upload vulnerability in LoveCMS 1.4 allows remote authenticated administrators to upload arbitrary files to /modules/content/pictures/tmp/. |
| CVE-2007-1057 | The Net Direct client for Linux before 6.0.5 in Nortel Application Switch 2424, VPN 3050 and 3070, and SSL VPN Module 1000 extracts and executes files with insecure permissions, which allows local users to exploit a race condition to replace a world-writable file in /tmp/NetClient and cause another user to execute arbitrary code when attempting to execute this client, as demonstrated by replacing /tmp/NetClient/client. |
| CVE-2007-0751 | A cleanup script in crontabs in Apple Mac OS X 10.3.9 and 10.4.9 might delete filesystems that have been mounted in /tmp, which might allow local users to cause a denial of service, related to the find command. |
| CVE-2007-0476 | The gencert.sh script, when installing OpenLDAP before 2.1.30-r10, 2.2.x before 2.2.28-r7, and 2.3.x before 2.3.30-r2 as an ebuild in Gentoo Linux, does not create temporary directories in /tmp securely during emerge, which allows local users to overwrite arbitrary files via a symlink attack. |
| CVE-2006-5851 | openexec in OpenBase SQL before 10.0.1 allows local users to create arbitrary files via a symlink attack on the /tmp/output file, a different vulnerability than CVE-2006-5328. |
| CVE-2006-5656 | Memory leak in the push_align function in src/util.c in Vilistextum before 2.6.9 allows remote attackers to cause a denial of service (memory consumption) via unspecified vectors related to the tmp_align variable. NOTE: it is not clear whether this is a vulnerability, due to the functionality of the product. |
| CVE-2006-5215 | The Xsession script, as used by X Display Manager (xdm) in NetBSD before 20060212, X.Org before 20060317, and Solaris 8 through 10 before 20061006, allows local users to overwrite arbitrary files, or read another user's Xsession errors file, via a symlink attack on a /tmp/xses-$USER file. |
| CVE-2006-5163 | IBM Informix Dynamic Server 10.UC3RC1 Trial for Linux and possibly other versions creates /tmp/installserver.txt with insecure permissions, which allows local users to append data to arbitrary files via a symlink attack. |
| CVE-2006-4233 | Globus Toolkit 3.2.x, 4.0.x, and 4.1.0 before 20060815 allow local users to obtain sensitive information (proxy certificates) and overwrite arbitrary files via a symlink attack on temporary files in the /tmp directory, as demonstrated by files created by (1) myproxy-admin-adduser, (2) grid-ca-sign, and (3) grid-security-config. |
| CVE-2006-1892 | avast! 4 Linux Home Edition 1.0.5 allows local users to modify permissions of arbitrary files via a symlink attack on the /tmp/_avast4_ temporary directory. |
| CVE-2006-1695 | The fbgs script in the fbi package 2.01-1.4, when the TMPDIR environment variable is not defined, allows local users to overwrite arbitrary files via a symlink attack on temporary files in /var/tmp/fbps-[PID]. |
| CVE-2006-1566 | Untrusted search path vulnerability in libtunepimp-perl 0.4.2-1 in Debian GNU/Linux includes an RPATH value under the /tmp/buildd directory for the tunepimp.so module, which might allow local users to gain privileges by installing malicious libraries in that directory. |
| CVE-2006-1565 | Untrusted search path vulnerability in libgpib-perl 3.2.06-2 in Debian GNU/Linux includes an RPATH value under the /tmp/buildd directory for the LinuxGpib.so module, which might allow local users to gain privileges by installing malicious libraries in that directory. |
| CVE-2006-1564 | Untrusted search path vulnerability in libapache2-svn 1.3.0-4 for Subversion in Debian GNU/Linux includes RPATH values under the /tmp/svn directory for the (1) mod_authz_svn.so and (2) mod_dav_svn.so modules, which might allow local users to gain privileges by installing malicious libraries in that directory. |
| CVE-2006-1231 | CAPI4HylaFAX 1.3, when compiled with GENERATE_DEBUGSFFDATAFILE set, allows local users to modify arbitrary files via a symlink attack on the c2faxrecv_dbgdatafile.sff temporary file. |
| CVE-2006-0893 | NOCC Webmail 1.0 allows remote attackers to obtain sensitive information via a direct request to (1) the profiles directory, which leaks e-mail addresses contained in filenames of profiles, and (2) the tmp directory, which lists names of uploaded attachments. |
| CVE-2005-4683 | PADL MigrationTools 46, when a failure occurs, stores contents of /etc/shadow in a world-readable /tmp/nis.$$.ldif file, and possibly other sensitive information in other temporary files, which are not properly managed by (1) migrate_all_online.sh, (2) migrate_all_offline.sh, (3) migrate_all_netinfo_online.sh, (4) migrate_all_netinfo_offline.sh, (5) migrate_all_nis_online.sh, (6) migrate_all_nis_offline.sh, (7) migrate_all_nisplus_online.sh, and (8) migrate_all_nisplus_offline.sh. |
| CVE-2005-2694 | Buffer overflow in WinAce 2.6.0.5, and possibly earlier versions, allows remote attackers to execute arbitrary code via a temporary (.tmp) file that contains an entry with a long file name. |
| CVE-2005-2101 | langen2kvtml in KDE 3.0 to 3.4.2 creates insecure temporary files in /tmp with predictable names, which allows local users to overwrite arbitrary files. |
| CVE-2005-1944 | xmysqladmin 1.0 and earlier allows local users to delete arbitrary files via a symlink attack on a database backup file in /tmp. |
| CVE-2005-1680 | D-Link DSL-502T, DSL-504T, DSL-562T, and DSL-G604T, when /cgi-bin/firmwarecfg is executed, allows remote attackers to bypass authentication (1) if their IP address already exists in /var/tmp/fw_ip or (2) if their request is the first, which causes /var/tmp/fw_ip to be created and contain their IP address. |
| CVE-2005-1636 | mysql_install_db in MySQL 4.1.x before 4.1.12 and 5.x up to 5.0.4 creates the mysql_install_db.X file with a predictable filename and insecure permissions, which allows local users to execute arbitrary SQL commands by modifying the file's contents. |
| CVE-2005-1632 | Cheetah 0.9.15 and 0.9.16 searches the /tmp directory for modules before using the paths in the PYTHONPATH variable, which allows local users to execute arbitrary code via a malicious module in /tmp/. |
| CVE-2005-0787 | Wine 20050211 and earlier creates temp files with world readable permissions and predictable file names, which allows local users to obtain sensitive information, such as passwords. |
| CVE-2005-0134 | The X server in SCO UnixWare 7.1.1, 7.1.3, and 7.1.4 does not properly create socket directories in /tmp, which could allow attackers to hijack local sockets. |
| CVE-2005-0106 | SSLeay.pm in libnet-ssleay-perl before 1.25 uses the /tmp/entropy file for entropy if a source is not set in the EGD_PATH variable, which allows local users to reduce the cryptographic strength of certain operations by modifying the file. |
| CVE-2004-2319 | IBM Informix Dynamic Server (IDS) before 9.40.xC3 allows local users to (1) create or overwrite files via the /001 log file to onedcu or (2) read arbitrary files via a symlink attack on a file in /tmp to onshowaudit. |
| CVE-2004-2097 | Multiple scripts on SuSE Linux 9.0 allow local users to overwrite arbitrary files via a symlink attack on (1) /tmp/fvwm-bug created by fvwm-bug, (2) /tmp/wmmenu created by wm-oldmenu2new, (3) /tmp/rates created by x11perfcomp, (4) /tmp/xf86debug.1.log created by xf86debug, (5) /tmp/.winpopup-new created by winpopup-send.sh, or (6) /tmp/initrd created by lvmcreate_initrd. |
| CVE-2004-2092 | eTrust InoculateIT for Linux 6.0 uses insecure permissions for multiple files and directories, including the application's registry and tmp directories, which allows local users to delete, modify, or examine sensitive information. |
| CVE-2004-0690 | The DCOPServer in KDE 3.2.3 and earlier allows local users to gain unauthorized access via a symlink attack on DCOP files in the /tmp directory. |
| CVE-2004-0581 | ksymoops-gznm script in Mandrake Linux 9.1 through 10.0, and Corporate Server 2.1, allows local users to delete arbitrary files via a symlink attack on files in /tmp. |
| CVE-2004-0559 | The maketemp.pl script in Usermin 1.070 and 1.080 allows local users to overwrite arbitrary files at install time via a symlink attack on the /tmp/.usermin directory. |
| CVE-2004-0530 | The PHP package in Slackware 8.1, 9.0, and 9.1, when linked against a static library, includes /tmp in the search path, which allows local users to execute arbitrary code as the PHP user by inserting shared libraries into the appropriate path. |
| CVE-2004-0404 | logcheck before 1.1.1 allows local users to overwrite arbitrary files via a symlink attack on a temporary directory in /var/tmp. |
| CVE-2004-0283 | Mailmgr 1.2.3 allows local users to overwrite arbitrary files via a symlink attack on (1) /tmp/mailmgr.unsort, (2) /tmp/mailmgr.tmp, or (3) /tmp/mailmgr.sort. |
| CVE-2004-0279 | AIM Sniff (aimSniff.pl) 0.9b allows local users to overwrite arbitrary files via a symlink attack on /tmp/AS.log. |
| CVE-2004-0267 | The (1) inoregupdate, (2) uniftest, or (3) unimove scripts in eTrust InoculateIT for Linux 6.0 allow local users to overwrite arbitrary files via a symlink attack on files in /tmp. |
| CVE-2004-0256 | GNU libtool before 1.5.2, during compile time, allows local users to overwrite arbitrary files via a symlink attack on libtool directories in /tmp. |
| CVE-2004-0217 | The LiveUpdate capability (liveupdate.sh) in Symantec AntiVirus Scan Engine 4.0 and 4.3 for Red Hat Linux allows local users to create or append to arbitrary files via a symlink attack on /tmp/LiveUpdate.log. |
| CVE-2003-1279 | S-PLUS 6.0 allows local users to overwrite arbitrary files and possibly elevate privileges via a symlink attack on (1) /tmp/__F8499 by Sqpe, (2) /tmp/PRINT.$$.out by PRINT, (3) /tmp/SUBST$PID.TXT and /tmp/ed.cmds$PID by mustfix.hlinks, (4) /tmp/file.1 and /tmp/file.2 by sas_get, (5) /tmp/file.1 by sas_vars, and (6) /tmp/sgml2html$$tmp /tmp/sgml2html$$tmp1 /tmp/sgml2html$$tmp2 by sglm2html. |
| CVE-2003-1099 | shar on HP-UX B.11.00, B.11.04, and B.11.11 creates temporary files with predictable names in /tmp, which allows local users to cause a denial of service and possibly execute arbitrary code via a symlink attack. |
| CVE-2003-0136 | psbanner in the LPRng package allows local users to overwrite arbitrary files via a symbolic link attack on the /tmp/before file. |
| CVE-2002-2382 | cvsupd.sh in CVSup 1.2 allows local users to overwrite arbitrary files and gain privileges via a symlink attack on /var/tmp/cvsupd.out. |
| CVE-2002-2001 | jmcce 1.3.8 in Mandrake 8.1 creates log files in /tmp with predictable names, which allows local users to overwrite arbitrary files via a symlink attack. |
| CVE-2002-1711 | BasiliX 1.1.0 saves attachments in a world readable /tmp/BasiliX directory, which allows local users to read other users' attachments. |
| CVE-2002-1423 | tmp_view.php in FUDforum before 2.2.0 allows remote attackers to read arbitrary files via an absolute pathname in the file parameter. |
| CVE-2002-0887 | scoadmin for Caldera/SCO OpenServer 5.0.5 and 5.0.6 allows local users to overwrite arbitrary files via a symlink attack on temporary files, as demonstrated using log files. |
| CVE-2002-0377 | Gaim 0.57 stores sensitive information in world-readable and group-writable files in the /tmp directory, which allows local users to access MSN web email accounts of other users who run Gaim by reading authentication information from the files. |
| CVE-2002-0210 | setlicense for TOLIS Group Backup and Restore Utility (BRU) 17.0 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/brutest.$$ temporary file. |
| CVE-2002-0141 | Maelstrom GPL 3.0.1 allows local users to overwrite arbitrary files of other Maelstrom users via a symlink attack on the /tmp/f file. |
| CVE-2001-1479 | smcboot in Sun SMC (Sun Management Center) 2.0 in Solaris 8 allows local users to delete arbitrary files via a symlink attack on /tmp/smc$SMC_PORT. |
| CVE-2001-1374 | expect before 5.32 searches for its libraries in /var/tmp before other directories, which could allow local users to gain root privileges via a Trojan horse library that is accessed by mkpasswd. |
| CVE-2001-1256 | kmmodreg in HP-UX 11.11, 11.04 and 11.00 allows local users to create arbitrary world-writeable files via a symlink attack on the (1) /tmp/.kmmodreg_lock and (2) /tmp/kmpath.tmp temporary files. |
| CVE-2001-1012 | Vulnerability in screen before 3.9.10, related to a multi-attach error, allows local users to gain root privileges when there is a subdirectory under /tmp/screens/. |
| CVE-2001-0627 | vi as included with SCO OpenServer 5.0 - 5.0.6 allows a local attacker to overwrite arbitrary files via a symlink attack. |
| CVE-2001-0625 | ftpdownload in Computer Associates InoculateIT 6.0 allows a local attacker to overwrite arbitrary files via a symlink attack on /tmp/ftpdownload.log . |
| CVE-2001-0610 | kfm as included with KDE 1.x can allow a local attacker to gain additional privileges via a symlink attack in the kfm cache directory in /tmp. |
| CVE-2001-0474 | Utah-glx in Mesa before 3.3-14 on Mandrake Linux 7.2 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/glxmemory file. |
| CVE-2001-0406 | Samba before 2.2.0 allows local attackers to overwrite arbitrary files via a symlink attack using (1) a printer queue query, (2) the more command in smbclient, or (3) the mput command in smbclient. |
| CVE-2001-0384 | ppd in Reliant Sinix allows local users to corrupt arbitrary files via a symlink attack in the /tmp/ppd.trace file. |
| CVE-2000-1156 | StarOffice 5.2 follows symlinks and sets world-readable permissions for the /tmp/soffice.tmp directory, which allows a local user to read files of the user who is using StarOffice. |
| CVE-2000-1134 | Multiple shell programs on various Unix systems, including (1) tcsh, (2) csh, (3) sh, and (4) bash, follow symlinks when processing << redirects (aka here-documents or in-here documents), which allows local users to overwrite files of other users via a symlink attack. |
| CVE-2000-0948 | GnoRPM before 0.95 allows local users to modify arbitrary files via a symlink attack. |
| CVE-2000-0829 | The tmpwatch utility in Red Hat Linux forks a new process for each directory level, which allows local users to cause a denial of service by creating deeply nested directories in /tmp or /var/tmp/. |
| CVE-2000-0724 | The go-gnome Helix GNOME pre-installer allows local users to overwrite arbitrary files via a symlink attack on various files in /tmp, including uudecode, snarf, and some installer files. |
| CVE-2000-0723 | Helix GNOME Updater helix-update 0.5 and earlier does not properly create /tmp directories, which allows local users to create empty system configuration files such as /etc/config.d/bashrc, /etc/config.d/csh.cshrc, and /etc/rc.config. |
| CVE-2000-0722 | Helix GNOME Updater helix-update 0.5 and earlier allows local users to install arbitrary RPM packages by creating the /tmp/helix-install installation directory before root has begun installing packages. |
| CVE-2000-0718 | A race condition in MandrakeUpdate allows local users to modify RPM files while they are in the /tmp directory before they are installed. |
| CVE-2000-0702 | The net.init rc script in HP-UX 11.00 (S008net.init) allows local users to overwrite arbitrary files via a symlink attack that points from /tmp/stcp.conf to the targeted file. |
| CVE-2000-0578 | SGI MIPSPro compilers C, C++, F77 and F90 generate temporary files in /tmp with predictable file names, which could allow local users to insert malicious contents into these files as they are being compiled by another user. |
| CVE-2000-0458 | The MSWordView application in IMP creates world-readable files in the /tmp directory, which allows other local users to read potentially sensitive information. |
| CVE-2000-0433 | The SuSE aaa_base package installs some system accounts with home directories set to /tmp, which allows local users to gain privileges to those accounts by creating standard user startup scripts such as profiles. |
| CVE-2000-0363 | Linux cdwtools 093 and earlier allows local users to gain root privileges via the /tmp directory. |
| CVE-2000-0293 | aaa_base in SuSE Linux 6.3, and cron.daily in earlier versions, allow local users to delete arbitrary files by creating files whose names include spaces, which are then incorrectly interpreted by aaa_base when it deletes expired files from the /tmp directory. |
| CVE-2000-0151 | GNU make follows symlinks when it reads a Makefile from stdin, which allows other local users to execute commands. |
| CVE-2000-0067 | CyberCash Merchant Connection Kit (MCK) allows local users to modify files via a symlink attack. |
| CVE-1999-1546 | netstation.navio-com.rte 1.1.0.1 configuration script for Navio NC on IBM AIX exports /tmp over NFS as world-readable and world-writable. |
| CVE-1999-1498 | Slackware Linux 3.4 pkgtool allows local attacker to read and write to arbitrary files via a symlink attack on the reply file. |
| CVE-1999-1439 | gcc 2.7.2 allows local users to overwrite arbitrary files via a symlink attack on temporary .i, .s, or .o files. |
| CVE-1999-1433 | HP JetAdmin D.01.09 on Solaris allows local users to change the permissions of arbitrary files via a symlink attack on the /tmp/jetadmin.log file. |
| CVE-1999-1407 | ifdhcpc-done script for configuring DHCP on Red Hat Linux 5 allows local users to append text to arbitrary files via a symlink attack on the dhcplog file. |
| CVE-1999-1405 | snap command in AIX before 4.3.2 creates the /tmp/ibmsupt directory with world-readable permissions and does not remove or clear the directory when snap -a is executed, which could allow local users to access the shadowed password file by creating /tmp/ibmsupt/general/passwd before root runs snap -a. |
| CVE-1999-1386 | Perl 5.004_04 and earlier follows symbolic links when running with the -e option, which allows local users to overwrite arbitrary files via a symlink attack on the /tmp/perl-eaXXXXX file. |
| CVE-1999-1345 | Auto_FTP.pl script in Auto_FTP 0.2 uses the /tmp/ftp_tmp as a shared directory with insecure permissions, which allows local users to (1) send arbitrary files to the remote server by placing them in the directory, and (2) view files that are being transferred. |
| CVE-1999-1138 | SCO UNIX System V/386 Release 3.2, and other SCO products, installs the home directories (1) /tmp for the dos user, and (2) /usr/tmp for the asg user, which allows other users to gain access to those accounts since /tmp and /usr/tmp are world-writable. |
| CVE-1999-1091 | UNIX news readers tin and rtin create the /tmp/.tin_log file with insecure permissions and follow symlinks, which allows attackers to modify the permissions of files writable by the user via a symlink attack. |
| CVE-1999-1037 | rex.satan in SATAN 1.1.1 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/rex.$$ file. |
| CVE-1999-1026 | aspppd on Solaris 2.5 x86 allows local users to modify arbitrary files and gain root privileges via a symlink attack on the /tmp/.asppp.fifo file. |
| CVE-1999-0743 | Trn allows local users to overwrite other users' files via symlinks. |
| CVE-1999-0480 | Local attackers can conduct a denial of service in Midnight Commander 4.x with a symlink attack. |
| CVE-1999-0371 | Lynx allows a local user to overwrite sensitive files through /tmp symlinks. |
|
You can also search by reference using the CVE Reference Maps.
For More Information: CVE Request Web Form (select “Other” from dropdown)
|
||
